Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

The phylink conflict was between a bug fix by Russell King
to make sure we have a consistent PHY interface mode, and
a change in net-next to pull some code in phylink_resolve()
into the helper functions phylink_mac_link_{up,down}()

On the dp83867 side it's mostly overlapping changes, with
the 'net' side removing a condition that was supposed to
trigger for RGMII but because of how it was coded never
actually could trigger.

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 41 insertions, 7 deletions

diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index ab77e6344d17..4a1275990d7e 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -208,8 +208,8 @@ tunnel6_a_addr="fd00:2::a"
 tunnel6_b_addr="fd00:2::b"
 tunnel6_mask="64"
 
-dummy6_0_addr="fc00:1000::0"
-dummy6_1_addr="fc00:1001::0"
+dummy6_0_prefix="fc00:1000::"
+dummy6_1_prefix="fc00:1001::"
 dummy6_mask="64"
 
 err_buf=
@@ -1002,13 +1002,13 @@ test_pmtu_vti6_link_change_mtu() {
 	run_cmd ${ns_a} ip link set dummy0 up
 	run_cmd ${ns_a} ip link set dummy1 up
 
-	run_cmd ${ns_a} ip addr add ${dummy6_0_addr}/${dummy6_mask} dev dummy0
-	run_cmd ${ns_a} ip addr add ${dummy6_1_addr}/${dummy6_mask} dev dummy1
+	run_cmd ${ns_a} ip addr add ${dummy6_0_prefix}1/${dummy6_mask} dev dummy0
+	run_cmd ${ns_a} ip addr add ${dummy6_1_prefix}1/${dummy6_mask} dev dummy1
 
 	fail=0
 
 	# Create vti6 interface bound to device, passing MTU, check it
-	run_cmd ${ns_a} ip link add vti6_a mtu 1300 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr}
+	run_cmd ${ns_a} ip link add vti6_a mtu 1300 type vti6 remote ${dummy6_0_prefix}2 local ${dummy6_0_prefix}1
 	mtu="$(link_get_mtu "${ns_a}" vti6_a)"
 	if [ ${mtu} -ne 1300 ]; then
 		err "  vti6 MTU ${mtu} doesn't match configured value 1300"
@@ -1017,7 +1017,7 @@ test_pmtu_vti6_link_change_mtu() {
 
 	# Move to another device with different MTU, without passing MTU, check
 	# MTU is adjusted
-	run_cmd ${ns_a} ip link set vti6_a type vti6 remote ${dummy6_1_addr} local ${dummy6_1_addr}
+	run_cmd ${ns_a} ip link set vti6_a type vti6 remote ${dummy6_1_prefix}2 local ${dummy6_1_prefix}1
 	mtu="$(link_get_mtu "${ns_a}" vti6_a)"
 	if [ ${mtu} -ne $((3000 - 40)) ]; then
 		err "  vti MTU ${mtu} is not dummy MTU 3000 minus IPv6 header length"
@@ -1025,7 +1025,7 @@ test_pmtu_vti6_link_change_mtu() {
 	fi
 
 	# Move it back, passing MTU, check MTU is not overridden
-	run_cmd ${ns_a} ip link set vti6_a mtu 1280 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr}
+	run_cmd ${ns_a} ip link set vti6_a mtu 1280 type vti6 remote ${dummy6_0_prefix}2 local ${dummy6_0_prefix}1
 	mtu="$(link_get_mtu "${ns_a}" vti6_a)"
 	if [ ${mtu} -ne 1280 ]; then
 		err "  vti6 MTU ${mtu} doesn't match configured value 1280"
diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c
index 47ddfc154036..278c86134556 100644
--- a/tools/testing/selftests/net/tls.c
+++ b/tools/testing/selftests/net/tls.c
@@ -442,6 +442,21 @@ TEST_F(tls, multiple_send_single_recv)
 	EXPECT_EQ(memcmp(send_mem, recv_mem + send_len, send_len), 0);
 }
 
+TEST_F(tls, single_send_multiple_recv_non_align)
+{
+	const unsigned int total_len = 15;
+	const unsigned int recv_len = 10;
+	char recv_mem[recv_len * 2];
+	char send_mem[total_len];
+
+	EXPECT_GE(send(self->fd, send_mem, total_len, 0), 0);
+	memset(recv_mem, 0, total_len);
+
+	EXPECT_EQ(recv(self->cfd, recv_mem, recv_len, 0), recv_len);
+	EXPECT_EQ(recv(self->cfd, recv_mem + recv_len, recv_len, 0), 5);
+	EXPECT_EQ(memcmp(send_mem, recv_mem, total_len), 0);
+}
+
 TEST_F(tls, recv_partial)
 {
 	char const *test_str = "test_read_partial";
@@ -575,6 +590,25 @@ TEST_F(tls, recv_peek_large_buf_mult_recs)
 	EXPECT_EQ(memcmp(test_str, buf, len), 0);
 }
 
+TEST_F(tls, recv_lowat)
+{
+	char send_mem[10] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 };
+	char recv_mem[20];
+	int lowat = 8;
+
+	EXPECT_EQ(send(self->fd, send_mem, 10, 0), 10);
+	EXPECT_EQ(send(self->fd, send_mem, 5, 0), 5);
+
+	memset(recv_mem, 0, 20);
+	EXPECT_EQ(setsockopt(self->cfd, SOL_SOCKET, SO_RCVLOWAT,
+			     &lowat, sizeof(lowat)), 0);
+	EXPECT_EQ(recv(self->cfd, recv_mem, 1, MSG_WAITALL), 1);
+	EXPECT_EQ(recv(self->cfd, recv_mem + 1, 6, MSG_WAITALL), 6);
+	EXPECT_EQ(recv(self->cfd, recv_mem + 7, 10, 0), 8);
+
+	EXPECT_EQ(memcmp(send_mem, recv_mem, 10), 0);
+	EXPECT_EQ(memcmp(send_mem, recv_mem + 10, 5), 0);
+}
 
 TEST_F(tls, pollin)
 {