summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/pci/pci.c29
-rw-r--r--drivers/pci/pci.h1
-rw-r--r--drivers/pci/pcie/portdrv_core.c66
3 files changed, 10 insertions, 86 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 29ed5ec1ac27..1b27b5af3d55 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1025,10 +1025,15 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
if (state == PCI_D0) {
pci_platform_power_transition(dev, PCI_D0);
/*
- * Mandatory power management transition delays are
- * handled in the PCIe portdrv resume hooks.
+ * Mandatory power management transition delays, see
+ * PCI Express Base Specification Revision 2.0 Section
+ * 6.6.1: Conventional Reset. Do not delay for
+ * devices powered on/off by corresponding bridge,
+ * because have already delayed for the bridge.
*/
if (dev->runtime_d3cold) {
+ if (dev->d3cold_delay && !dev->imm_ready)
+ msleep(dev->d3cold_delay);
/*
* When powering on a bridge from D3cold, the
* whole hierarchy may be powered on into
@@ -4602,16 +4607,14 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS);
}
-
/**
- * pcie_wait_for_link_delay - Wait until link is active or inactive
+ * pcie_wait_for_link - Wait until link is active or inactive
* @pdev: Bridge device
* @active: waiting for active or inactive?
- * @delay: Delay to wait after link has become active (in ms)
*
* Use this to wait till link becomes active or inactive.
*/
-bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay)
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
{
int timeout = 1000;
bool ret;
@@ -4648,25 +4651,13 @@ bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay)
timeout -= 10;
}
if (active && ret)
- msleep(delay);
+ msleep(100);
else if (ret != active)
pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
active ? "set" : "cleared");
return ret == active;
}
-/**
- * pcie_wait_for_link - Wait until link is active or inactive
- * @pdev: Bridge device
- * @active: waiting for active or inactive?
- *
- * Use this to wait till link becomes active or inactive.
- */
-bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
-{
- return pcie_wait_for_link_delay(pdev, active, 100);
-}
-
void pci_reset_secondary_bus(struct pci_dev *dev)
{
u16 ctrl;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1be03a97cb92..d22d1b807701 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -497,7 +497,6 @@ static inline int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
u32 service);
-bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay);
bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
#ifdef CONFIG_PCIEASPM
void pcie_aspm_init_link_state(struct pci_dev *pdev);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 308c3e0c4a34..1b330129089f 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -9,7 +9,6 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
@@ -379,67 +378,6 @@ static int pm_iter(struct device *dev, void *data)
return 0;
}
-static int get_downstream_delay(struct pci_bus *bus)
-{
- struct pci_dev *pdev;
- int min_delay = 100;
- int max_delay = 0;
-
- list_for_each_entry(pdev, &bus->devices, bus_list) {
- if (!pdev->imm_ready)
- min_delay = 0;
- else if (pdev->d3cold_delay < min_delay)
- min_delay = pdev->d3cold_delay;
- if (pdev->d3cold_delay > max_delay)
- max_delay = pdev->d3cold_delay;
- }
-
- return max(min_delay, max_delay);
-}
-
-/*
- * wait_for_downstream_link - Wait for downstream link to establish
- * @pdev: PCIe port whose downstream link is waited
- *
- * Handle delays according to PCIe 4.0 section 6.6.1 before configuration
- * access to the downstream component is permitted.
- *
- * This blocks PCI core resume of the hierarchy below this port until the
- * link is trained. Should be called before resuming port services to
- * prevent pciehp from starting to tear-down the hierarchy too soon.
- */
-static void wait_for_downstream_link(struct pci_dev *pdev)
-{
- int delay;
-
- if (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT &&
- pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)
- return;
-
- if (pci_dev_is_disconnected(pdev))
- return;
-
- if (!pdev->subordinate || list_empty(&pdev->subordinate->devices) ||
- !pdev->bridge_d3)
- return;
-
- delay = get_downstream_delay(pdev->subordinate);
- if (!delay)
- return;
-
- dev_dbg(&pdev->dev, "waiting downstream link for %d ms\n", delay);
-
- /*
- * If downstream port does not support speeds greater than 5 GT/s
- * need to wait 100ms. For higher speeds (gen3) we need to wait
- * first for the data link layer to become active.
- */
- if (pcie_get_speed_cap(pdev) <= PCIE_SPEED_5_0GT)
- msleep(delay);
- else
- pcie_wait_for_link_delay(pdev, true, delay);
-}
-
/**
* pcie_port_device_suspend - suspend port services associated with a PCIe port
* @dev: PCI Express port to handle
@@ -453,8 +391,6 @@ int pcie_port_device_suspend(struct device *dev)
int pcie_port_device_resume_noirq(struct device *dev)
{
size_t off = offsetof(struct pcie_port_service_driver, resume_noirq);
-
- wait_for_downstream_link(to_pci_dev(dev));
return device_for_each_child(dev, &off, pm_iter);
}
@@ -485,8 +421,6 @@ int pcie_port_device_runtime_suspend(struct device *dev)
int pcie_port_device_runtime_resume(struct device *dev)
{
size_t off = offsetof(struct pcie_port_service_driver, runtime_resume);
-
- wait_for_downstream_link(to_pci_dev(dev));
return device_for_each_child(dev, &off, pm_iter);
}
#endif /* PM */