summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.mailmap1
-rw-r--r--Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt17
-rw-r--r--Documentation/devicetree/bindings/mips/brcm/soc.txt4
-rw-r--r--Documentation/features/perf/kprobes-event/arch-support.txt2
-rw-r--r--MAINTAINERS6
-rw-r--r--arch/mips/Kbuild.platforms2
-rw-r--r--arch/mips/Kconfig121
-rw-r--r--arch/mips/Makefile77
-rw-r--r--arch/mips/alchemy/common/setup.c6
-rw-r--r--arch/mips/bcm47xx/serial.c11
-rw-r--r--arch/mips/bcm63xx/clk.c3
-rw-r--r--arch/mips/bmips/Kconfig20
-rw-r--r--arch/mips/bmips/setup.c12
-rw-r--r--arch/mips/boot/Makefile66
-rw-r--r--arch/mips/boot/dts/brcm/Makefile36
-rw-r--r--arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts22
-rw-r--r--arch/mips/boot/dts/brcm/bcm3368.dtsi101
-rw-r--r--arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts108
-rw-r--r--arch/mips/boot/dts/brcm/bcm63268.dtsi134
-rw-r--r--arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts (renamed from arch/mips/boot/dts/brcm/bcm96358nb4ser.dts)1
-rw-r--r--arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts22
-rw-r--r--arch/mips/boot/dts/brcm/bcm6362.dtsi134
-rw-r--r--arch/mips/boot/dts/brcm/bcm7125.dtsi34
-rw-r--r--arch/mips/boot/dts/brcm/bcm7346.dtsi97
-rw-r--r--arch/mips/boot/dts/brcm/bcm7358.dtsi89
-rw-r--r--arch/mips/boot/dts/brcm/bcm7360.dtsi89
-rw-r--r--arch/mips/boot/dts/brcm/bcm7362.dtsi89
-rw-r--r--arch/mips/boot/dts/brcm/bcm7420.dtsi42
-rw-r--r--arch/mips/boot/dts/brcm/bcm7425.dtsi109
-rw-r--r--arch/mips/boot/dts/brcm/bcm7435.dtsi109
-rw-r--r--arch/mips/boot/dts/brcm/bcm97125cbmb.dts4
-rw-r--r--arch/mips/boot/dts/brcm/bcm97346dbsmb.dts17
-rw-r--r--arch/mips/boot/dts/brcm/bcm97358svmb.dts13
-rw-r--r--arch/mips/boot/dts/brcm/bcm97360svmb.dts8
-rw-r--r--arch/mips/boot/dts/brcm/bcm97362svmb.dts13
-rw-r--r--arch/mips/boot/dts/brcm/bcm97420c.dts8
-rw-r--r--arch/mips/boot/dts/brcm/bcm97425svmb.dts21
-rw-r--r--arch/mips/boot/dts/brcm/bcm97435svmb.dts21
-rw-r--r--arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi25
-rw-r--r--arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi25
-rw-r--r--arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts45
-rw-r--r--arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi58
-rw-r--r--arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts40
-rw-r--r--arch/mips/boot/dts/mti/Makefile2
-rw-r--r--arch/mips/boot/dts/mti/malta.dts99
-rw-r--r--arch/mips/boot/dts/mti/sead3.dts238
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-board.c337
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c5
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c1
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c2
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper.c10
-rw-r--r--arch/mips/cavium-octeon/setup.c38
-rw-r--r--arch/mips/configs/generic/32r1.config2
-rw-r--r--arch/mips/configs/generic/32r2.config3
-rw-r--r--arch/mips/configs/generic/32r6.config2
-rw-r--r--arch/mips/configs/generic/64r1.config4
-rw-r--r--arch/mips/configs/generic/64r2.config5
-rw-r--r--arch/mips/configs/generic/64r6.config4
-rw-r--r--arch/mips/configs/generic/board-sead-3.config32
-rw-r--r--arch/mips/configs/generic/eb.config1
-rw-r--r--arch/mips/configs/generic/el.config1
-rw-r--r--arch/mips/configs/generic/micro32r2.config4
-rw-r--r--arch/mips/configs/generic_defconfig96
-rw-r--r--arch/mips/configs/loongson1c_defconfig126
-rw-r--r--arch/mips/configs/malta_defconfig4
-rw-r--r--arch/mips/configs/malta_kvm_defconfig4
-rw-r--r--arch/mips/configs/malta_kvm_guest_defconfig4
-rw-r--r--arch/mips/configs/malta_qemu_32r6_defconfig2
-rw-r--r--arch/mips/configs/maltaaprp_defconfig2
-rw-r--r--arch/mips/configs/maltasmvp_defconfig2
-rw-r--r--arch/mips/configs/maltasmvp_eva_defconfig2
-rw-r--r--arch/mips/configs/maltaup_defconfig2
-rw-r--r--arch/mips/configs/maltaup_xpa_defconfig4
-rw-r--r--arch/mips/configs/pistachio_defconfig2
-rw-r--r--arch/mips/configs/sead3_defconfig121
-rw-r--r--arch/mips/configs/sead3micro_defconfig122
-rw-r--r--arch/mips/generic/Kconfig19
-rw-r--r--arch/mips/generic/Makefile15
-rw-r--r--arch/mips/generic/Platform14
-rw-r--r--arch/mips/generic/board-sead3.c376
-rw-r--r--arch/mips/generic/init.c176
-rw-r--r--arch/mips/generic/irq.c64
-rw-r--r--arch/mips/generic/proc.c29
-rw-r--r--arch/mips/generic/vmlinux.its.S31
-rw-r--r--arch/mips/include/asm/addrspace.h3
-rw-r--r--arch/mips/include/asm/barrier.h96
-rw-r--r--arch/mips/include/asm/cacheflush.h5
-rw-r--r--arch/mips/include/asm/cpu-type.h3
-rw-r--r--arch/mips/include/asm/cpu.h1
-rw-r--r--arch/mips/include/asm/device.h5
-rw-r--r--arch/mips/include/asm/dma-coherence.h16
-rw-r--r--arch/mips/include/asm/dma-mapping.h10
-rw-r--r--arch/mips/include/asm/i8259.h12
-rw-r--r--arch/mips/include/asm/mach-generic/dma-coherence.h14
-rw-r--r--arch/mips/include/asm/mach-generic/floppy.h6
-rw-r--r--arch/mips/include/asm/mach-generic/spaces.h8
-rw-r--r--arch/mips/include/asm/mach-ip27/spaces.h1
-rw-r--r--arch/mips/include/asm/mach-loongson32/irq.h41
-rw-r--r--arch/mips/include/asm/mach-loongson32/loongson1.h5
-rw-r--r--arch/mips/include/asm/mach-loongson32/platform.h1
-rw-r--r--arch/mips/include/asm/mach-loongson32/regs-clk.h34
-rw-r--r--arch/mips/include/asm/mach-loongson32/regs-mux.h61
-rw-r--r--arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h72
-rw-r--r--arch/mips/include/asm/mach-sead3/irq.h9
-rw-r--r--arch/mips/include/asm/mach-sead3/kernel-entry-init.h21
-rw-r--r--arch/mips/include/asm/mach-sead3/war.h24
-rw-r--r--arch/mips/include/asm/machine.h63
-rw-r--r--arch/mips/include/asm/mips-boards/sead3int.h32
-rw-r--r--arch/mips/include/asm/mips-cm.h1
-rw-r--r--arch/mips/include/asm/octeon/cvmx-helper-board.h30
-rw-r--r--arch/mips/include/asm/octeon/cvmx-mdio.h506
-rw-r--r--arch/mips/include/asm/pci.h60
-rw-r--r--arch/mips/include/asm/pgalloc.h6
-rw-r--r--arch/mips/include/asm/pm-cps.h6
-rw-r--r--arch/mips/include/asm/ptrace.h2
-rw-r--r--arch/mips/include/asm/smp.h14
-rw-r--r--arch/mips/include/asm/uaccess.h18
-rw-r--r--arch/mips/kernel/binfmt_elfn32.c8
-rw-r--r--arch/mips/kernel/binfmt_elfo32.c8
-rw-r--r--arch/mips/kernel/branch.c36
-rw-r--r--arch/mips/kernel/kprobes.c67
-rw-r--r--arch/mips/kernel/linux32.c1
-rw-r--r--arch/mips/kernel/mips-cpc.c17
-rw-r--r--arch/mips/kernel/mips-r2-to-r6-emul.c1
-rw-r--r--arch/mips/kernel/module.c1
-rw-r--r--arch/mips/kernel/pm-cps.c160
-rw-r--r--arch/mips/kernel/probes-common.h83
-rw-r--r--arch/mips/kernel/proc.c7
-rw-r--r--arch/mips/kernel/smp-gic.c66
-rw-r--r--arch/mips/kernel/smp-mt.c23
-rw-r--r--arch/mips/kernel/smp.c65
-rw-r--r--arch/mips/kernel/traps.c53
-rw-r--r--arch/mips/kernel/uprobes.c88
-rw-r--r--arch/mips/kvm/commpage.c1
-rw-r--r--arch/mips/kvm/dyntrans.c5
-rw-r--r--arch/mips/kvm/emulate.c1
-rw-r--r--arch/mips/kvm/interrupt.c1
-rw-r--r--arch/mips/kvm/trap_emul.c1
-rw-r--r--arch/mips/lantiq/xway/vmmc.c6
-rw-r--r--arch/mips/lantiq/xway/xrx200_phy_fw.c12
-rw-r--r--arch/mips/lib/ashldi3.c2
-rw-r--r--arch/mips/lib/ashrdi3.c2
-rw-r--r--arch/mips/lib/bswapdi.c3
-rw-r--r--arch/mips/lib/bswapsi.c3
-rw-r--r--arch/mips/lib/cmpdi2.c2
-rw-r--r--arch/mips/lib/delay.c2
-rw-r--r--arch/mips/lib/iomap-pci.c6
-rw-r--r--arch/mips/lib/iomap.c2
-rw-r--r--arch/mips/lib/lshrdi3.c2
-rw-r--r--arch/mips/lib/ucmpdi2.c2
-rw-r--r--arch/mips/loongson32/Kconfig15
-rw-r--r--arch/mips/loongson32/Makefile6
-rw-r--r--arch/mips/loongson32/Platform1
-rw-r--r--arch/mips/loongson32/common/irq.c55
-rw-r--r--arch/mips/loongson32/common/platform.c32
-rw-r--r--arch/mips/loongson32/common/setup.c4
-rw-r--r--arch/mips/loongson32/ls1c/Makefile5
-rw-r--r--arch/mips/loongson32/ls1c/board.c27
-rw-r--r--arch/mips/mm/c-octeon.c2
-rw-r--r--arch/mips/mm/c-r3k.c2
-rw-r--r--arch/mips/mm/c-r4k.c61
-rw-r--r--arch/mips/mm/c-tx39.c3
-rw-r--r--arch/mips/mm/cache.c8
-rw-r--r--arch/mips/mm/dma-default.c18
-rw-r--r--arch/mips/mm/extable.c2
-rw-r--r--arch/mips/mm/fault.c1
-rw-r--r--arch/mips/mm/highmem.c3
-rw-r--r--arch/mips/mm/init.c2
-rw-r--r--arch/mips/mm/ioremap.c2
-rw-r--r--arch/mips/mm/mmap.c2
-rw-r--r--arch/mips/mm/page.c1
-rw-r--r--arch/mips/mm/tlb-r4k.c9
-rw-r--r--arch/mips/mti-malta/malta-dt.c15
-rw-r--r--arch/mips/mti-malta/malta-dtshim.c187
-rw-r--r--arch/mips/mti-malta/malta-init.c17
-rw-r--r--arch/mips/mti-malta/malta-int.c111
-rw-r--r--arch/mips/mti-malta/malta-platform.c73
-rw-r--r--arch/mips/mti-malta/malta-reset.c21
-rw-r--r--arch/mips/mti-malta/malta-setup.c10
-rw-r--r--arch/mips/mti-sead3/Makefile15
-rw-r--r--arch/mips/mti-sead3/Platform7
-rw-r--r--arch/mips/mti-sead3/sead3-console.c46
-rw-r--r--arch/mips/mti-sead3/sead3-display.c77
-rw-r--r--arch/mips/mti-sead3/sead3-init.c152
-rw-r--r--arch/mips/mti-sead3/sead3-int.c42
-rw-r--r--arch/mips/mti-sead3/sead3-lcd.c43
-rw-r--r--arch/mips/mti-sead3/sead3-platform.c223
-rw-r--r--arch/mips/mti-sead3/sead3-reset.c40
-rw-r--r--arch/mips/mti-sead3/sead3-setup.c108
-rw-r--r--arch/mips/mti-sead3/sead3-time.c99
-rw-r--r--arch/mips/pci/Makefile2
-rw-r--r--arch/mips/pci/pci-alchemy.c3
-rw-r--r--arch/mips/pci/pci-ar71xx.c2
-rw-r--r--arch/mips/pci/pci-ar724x.c2
-rw-r--r--arch/mips/pci/pci-generic.c52
-rw-r--r--arch/mips/pci/pci-lantiq.c2
-rw-r--r--arch/mips/pci/pci-legacy.c302
-rw-r--r--arch/mips/pci/pci-mt7620.c3
-rw-r--r--arch/mips/pci/pci-octeon.c2
-rw-r--r--arch/mips/pci/pci-rt2880.c2
-rw-r--r--arch/mips/pci/pci-rt3883.c2
-rw-r--r--arch/mips/pci/pci.c297
-rw-r--r--arch/mips/pci/pcie-octeon.c2
-rw-r--r--arch/mips/pnx833x/common/platform.c8
-rw-r--r--arch/mips/ralink/timer.c28
-rw-r--r--arch/mips/txx9/Kconfig2
-rw-r--r--arch/mips/txx9/generic/pci.c6
-rw-r--r--arch/mips/txx9/generic/setup.c70
-rw-r--r--arch/mips/txx9/generic/setup_tx3927.c1
-rw-r--r--arch/mips/txx9/generic/setup_tx4927.c1
-rw-r--r--arch/mips/txx9/generic/setup_tx4938.c1
-rw-r--r--arch/mips/txx9/jmr3927/setup.c11
-rw-r--r--arch/mips/txx9/rbtx4927/setup.c32
-rw-r--r--arch/mips/txx9/rbtx4938/setup.c1
-rw-r--r--arch/mips/vdso/Makefile4
-rw-r--r--drivers/auxdisplay/Kconfig9
-rw-r--r--drivers/auxdisplay/Makefile1
-rw-r--r--drivers/auxdisplay/img-ascii-lcd.c443
-rw-r--r--drivers/cpuidle/Kconfig.mips2
-rw-r--r--drivers/cpuidle/cpuidle-cps.c2
-rw-r--r--drivers/irqchip/irq-i8259.c30
-rw-r--r--drivers/of/platform.c1
-rw-r--r--drivers/usb/host/ehci-hcd.c5
-rw-r--r--drivers/usb/host/ehci-sead3.c185
-rw-r--r--drivers/video/fbdev/Kconfig2
-rw-r--r--drivers/video/fbdev/cobalt_lcdfb.c42
226 files changed, 5242 insertions, 3657 deletions
diff --git a/.mailmap b/.mailmap
index 2408e56e241b..02d261407683 100644
--- a/.mailmap
+++ b/.mailmap
@@ -127,6 +127,7 @@ Peter Oruba <peter@oruba.de>
Peter Oruba <peter.oruba@amd.com>
Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
Praveen BP <praveenbp@ti.com>
+Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
Rajesh Shah <rajesh.shah@intel.com>
Ralf Baechle <ralf@linux-mips.org>
Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
diff --git a/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt b/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
new file mode 100644
index 000000000000..b69bb68992fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
@@ -0,0 +1,17 @@
+Binding for ASCII LCD displays on Imagination Technologies boards
+
+Required properties:
+- compatible : should be one of:
+ "img,boston-lcd"
+ "mti,malta-lcd"
+ "mti,sead3-lcd"
+
+Required properties for "img,boston-lcd":
+- reg : memory region locating the device registers
+
+Required properties for "mti,malta-lcd" or "mti,sead3-lcd":
+- regmap: phandle of the system controller containing the LCD registers
+- offset: offset in bytes to the LCD registers within the system controller
+
+The layout of the registers & properties of the display are determined
+from the compatible string, making this binding somewhat trivial.
diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt
index 4a7e030e4f9b..e4e1cd91fb1f 100644
--- a/Documentation/devicetree/bindings/mips/brcm/soc.txt
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt
@@ -2,9 +2,9 @@
Required properties:
-- compatible: "brcm,bcm3384", "brcm,bcm33843"
+- compatible: "brcm,bcm3368", "brcm,bcm3384", "brcm,bcm33843"
"brcm,bcm3384-viper", "brcm,bcm33843-viper"
- "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368",
+ "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6362", "brcm,bcm6368",
"brcm,bcm63168", "brcm,bcm63268",
"brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
"brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"
diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt
index 9855ad044386..4660bf222db1 100644
--- a/Documentation/features/perf/kprobes-event/arch-support.txt
+++ b/Documentation/features/perf/kprobes-event/arch-support.txt
@@ -22,7 +22,7 @@
| m68k: | TODO |
| metag: | TODO |
| microblaze: | TODO |
- | mips: | TODO |
+ | mips: | ok |
| mn10300: | TODO |
| nios2: | TODO |
| openrisc: | TODO |
diff --git a/MAINTAINERS b/MAINTAINERS
index 5f5e5caefc35..1cd38a7e0064 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6131,6 +6131,12 @@ M: Stanislaw Gruszka <stf_xl@wp.pl>
S: Maintained
F: drivers/usb/atm/ueagle-atm.c
+IMGTEC ASCII LCD DRIVER
+M: Paul Burton <paul.burton@imgtec.com>
+S: Maintained
+F: Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
+F: drivers/auxdisplay/img-ascii-lcd.c
+
INA209 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: linux-hwmon@vger.kernel.org
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index c5cd63a4b6d5..f5f1bdb292de 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -11,6 +11,7 @@ platforms += cavium-octeon
platforms += cobalt
platforms += dec
platforms += emma
+platforms += generic
platforms += jazz
platforms += jz4740
platforms += lantiq
@@ -18,7 +19,6 @@ platforms += lasat
platforms += loongson32
platforms += loongson64
platforms += mti-malta
-platforms += mti-sead3
platforms += netlogic
platforms += paravirt
platforms += pic32
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1a322c807f22..b3c5bde43d34 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -65,6 +65,7 @@ config MIPS
select HANDLE_DOMAIN_IRQ
select HAVE_EXIT_THREAD
select HAVE_REGS_AND_STACK_ACCESS_API
+ select HAVE_ARCH_HARDENED_USERCOPY
menu "Machine selection"
@@ -72,6 +73,57 @@ choice
prompt "System type"
default SGI_IP22
+config MIPS_GENERIC
+ bool "Generic board-agnostic MIPS kernel"
+ select BOOT_RAW
+ select BUILTIN_DTB
+ select CEVT_R4K
+ select CLKSRC_MIPS_GIC
+ select COMMON_CLK
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
+ select CSRC_R4K
+ select DMA_PERDEV_COHERENT
+ select HW_HAS_PCI
+ select IRQ_MIPS_CPU
+ select LIBFDT
+ select MIPS_CPU_SCACHE
+ select MIPS_GIC
+ select MIPS_L1_CACHE_SHIFT_7
+ select NO_EXCEPT_FILL
+ select PCI_DRIVERS_GENERIC
+ select PINCTRL
+ select SMP_UP if SMP
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS32_R6
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_MIPS64_R2
+ select SYS_HAS_CPU_MIPS64_R6
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MICROMIPS
+ select SYS_SUPPORTS_MIPS_CPS
+ select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_RELOCATABLE
+ select SYS_SUPPORTS_SMARTMIPS
+ select USB_EHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+ select USB_EHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USB_UHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+ select USB_UHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USE_OF
+ help
+ Select this to build a kernel which aims to support multiple boards,
+ generally using a flattened device tree passed from the bootloader
+ using the boot protocol defined in the UHI (Unified Hosting
+ Interface) specification.
+
config MIPS_ALCHEMY
bool "Alchemy processor based machines"
select ARCH_PHYS_ADDR_T_64BIT
@@ -478,6 +530,7 @@ config MIPS_MALTA
select SYS_SUPPORTS_ZBOOT
select SYS_SUPPORTS_RELOCATABLE
select USE_OF
+ select LIBFDT
select ZONE_DMA32 if 64BIT
select BUILTIN_DTB
select LIBFDT
@@ -493,42 +546,6 @@ config MACH_PIC32
Microchip PIC32 is a family of general-purpose 32 bit MIPS core
microcontrollers.
-config MIPS_SEAD3
- bool "MIPS SEAD3 board"
- select BOOT_ELF32
- select BOOT_RAW
- select BUILTIN_DTB
- select CEVT_R4K
- select CSRC_R4K
- select CLKSRC_MIPS_GIC
- select COMMON_CLK
- select CPU_MIPSR2_IRQ_VI
- select CPU_MIPSR2_IRQ_EI
- select DMA_NONCOHERENT
- select IRQ_MIPS_CPU
- select MIPS_GIC
- select LIBFDT
- select MIPS_MSC
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_CPU_MIPS32_R6
- select SYS_HAS_CPU_MIPS64_R1
- select SYS_HAS_EARLY_PRINTK
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_SMARTMIPS
- select SYS_SUPPORTS_MICROMIPS
- select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_RELOCATABLE
- select USB_EHCI_BIG_ENDIAN_DESC
- select USB_EHCI_BIG_ENDIAN_MMIO
- select USE_OF
- help
- This enables support for the MIPS Technologies SEAD3 evaluation
- board.
-
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH
@@ -988,6 +1005,7 @@ source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/bmips/Kconfig"
+source "arch/mips/generic/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
@@ -1098,6 +1116,10 @@ config DMA_MAYBE_COHERENT
select DMA_NONCOHERENT
bool
+config DMA_PERDEV_COHERENT
+ bool
+ select DMA_MAYBE_COHERENT
+
config DMA_COHERENT
bool
@@ -1401,6 +1423,16 @@ config CPU_LOONGSON1B
The Loongson 1B is a 32-bit SoC, which implements the MIPS32
release 2 instruction set.
+config CPU_LOONGSON1C
+ bool "Loongson 1C"
+ depends on SYS_HAS_CPU_LOONGSON1C
+ select CPU_LOONGSON1
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select LEDS_GPIO_REGISTER
+ help
+ The Loongson 1C is a 32-bit SoC, which implements the MIPS32
+ release 2 instruction set.
+
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
@@ -1850,6 +1882,9 @@ config SYS_HAS_CPU_LOONGSON2F
config SYS_HAS_CPU_LOONGSON1B
bool
+config SYS_HAS_CPU_LOONGSON1C
+ bool
+
config SYS_HAS_CPU_MIPS32_R1
bool
@@ -2906,7 +2941,7 @@ endchoice
choice
prompt "Kernel command line type" if !CMDLINE_OVERRIDE
default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
- !MIPS_MALTA && !MIPS_SEAD3 && \
+ !MIPS_MALTA && \
!CAVIUM_OCTEON_SOC
default MIPS_CMDLINE_FROM_BOOTLOADER
@@ -2960,7 +2995,6 @@ config PCI
bool "Support for PCI controller"
depends on HW_HAS_PCI
select PCI_DOMAINS
- select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -2981,6 +3015,17 @@ config HT_PCI
config PCI_DOMAINS
bool
+config PCI_DOMAINS_GENERIC
+ bool
+
+config PCI_DRIVERS_GENERIC
+ select PCI_DOMAINS_GENERIC if PCI_DOMAINS
+ bool
+
+config PCI_DRIVERS_LEGACY
+ def_bool !PCI_DRIVERS_GENERIC
+ select NO_GENERIC_PCI_IOPORT_MAP
+
source "drivers/pci/Kconfig"
#
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 598ab2930fce..fbf40d3c8123 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -262,7 +262,14 @@ KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
- VMLINUX_ENTRY_ADDRESS=$(entry-y)
+ VMLINUX_ENTRY_ADDRESS=$(entry-y) \
+ PLATFORM=$(platform-y)
+ifdef CONFIG_32BIT
+bootvars-y += ADDR_BITS=32
+endif
+ifdef CONFIG_64BIT
+bootvars-y += ADDR_BITS=64
+endif
LDFLAGS += -m $(ld-emul)
@@ -302,6 +309,11 @@ boot-y += uImage.gz
boot-y += uImage.lzma
boot-y += uImage.lzo
endif
+boot-y += vmlinux.itb
+boot-y += vmlinux.gz.itb
+boot-y += vmlinux.bz2.itb
+boot-y += vmlinux.lzma.itb
+boot-y += vmlinux.lzo.itb
# compressed boot image targets (arch/mips/boot/compressed/)
bootz-y := vmlinuz
@@ -425,4 +437,67 @@ define archhelp
echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo
echo ' These will be default as appropriate for a configured platform.'
+ echo
+ echo ' If you are targeting a system supported by generic kernels you may'
+ echo ' configure the kernel for a given architecture target like so:'
+ echo
+ echo ' {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
+ echo
+ echo ' Otherwise, the following default configurations are available:'
endef
+
+generic_config_dir = $(srctree)/arch/$(ARCH)/configs/generic
+generic_defconfigs :=
+
+#
+# If the user generates a generic kernel configuration without specifying a
+# list of boards to include the config fragments for, default to including all
+# available board config fragments.
+#
+ifeq ($(BOARDS),)
+BOARDS = $(patsubst board-%.config,%,$(notdir $(wildcard $(generic_config_dir)/board-*.config)))
+endif
+
+#
+# Generic kernel configurations which merge generic_defconfig with the
+# appropriate config fragments from arch/mips/configs/generic/, resulting in
+# the ability to easily configure the kernel for a given architecture,
+# endianness & set of boards without duplicating the needed configuration in
+# hundreds of defconfig files.
+#
+define gen_generic_defconfigs
+$(foreach bits,$(1),$(foreach rev,$(2),$(foreach endian,$(3),
+target := $(bits)$(rev)$(filter el,$(endian))_defconfig
+generic_defconfigs += $$(target)
+$$(target): $(generic_config_dir)/$(bits)$(rev).config
+$$(target): $(generic_config_dir)/$(endian).config
+)))
+endef
+
+$(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
+$(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
+
+.PHONY: $(generic_defconfigs)
+$(generic_defconfigs):
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+ -m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ \
+ $(foreach board,$(BOARDS),$(generic_config_dir)/board-$(board).config)
+ $(Q)$(MAKE) olddefconfig
+
+#
+# Prevent generic merge_config rules attempting to merge single fragments
+#
+$(generic_config_dir)/%.config: ;
+
+#
+# Legacy defconfig compatibility - these targets used to be real defconfigs but
+# now that the boards have been converted to use the generic kernel they are
+# wrappers around the generic rules above.
+#
+.PHONY: sead3_defconfig
+sead3_defconfig:
+ $(Q)$(MAKE) 32r2el_defconfig BOARDS=sead-3
+
+.PHONY: sead3micro_defconfig
+sead3micro_defconfig:
+ $(Q)$(MAKE) micro32r2el_defconfig BOARDS=sead-3
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 2902138b3e0f..7faaa6d593a7 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -48,17 +48,17 @@ void __init plat_mem_setup(void)
clear_c0_config(1 << 19); /* Clear Config[OD] */
hw_coherentio = 0;
- coherentio = 1;
+ coherentio = IO_COHERENCE_ENABLED;
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100:
- coherentio = 0;
+ coherentio = IO_COHERENCE_DISABLED;
break;
case ALCHEMY_CPU_AU1200:
/* Au1200 AB USB does not support coherent memory */
if (0 == (read_c0_prid() & PRID_REV_MASK))
- coherentio = 0;
+ coherentio = IO_COHERENCE_DISABLED;
break;
}
diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c
index df761d38f7fc..e3c9872a4aa5 100644
--- a/arch/mips/bcm47xx/serial.c
+++ b/arch/mips/bcm47xx/serial.c
@@ -1,4 +1,7 @@
/*
+ * 8250 UART probe driver for the BCM47XX platforms
+ * Author: Aurelien Jarno
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -6,7 +9,6 @@
* Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
*/
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
@@ -88,9 +90,4 @@ static int __init uart8250_init(void)
}
return -EINVAL;
}
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the BCM47XX platforms");
+device_initcall(uart8250_init);
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 637565284732..b49fc9cb9cad 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -326,6 +326,9 @@ EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
+ if (!clk)
+ return;
+
mutex_lock(&clocks_mutex);
clk_disable_unlocked(clk);
mutex_unlock(&clocks_mutex);
diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig
index 264328d528c7..2d60f25403de 100644
--- a/arch/mips/bmips/Kconfig
+++ b/arch/mips/bmips/Kconfig
@@ -21,10 +21,6 @@ config DT_BCM93384WVG_VIPER
bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
select BUILTIN_DTB
-config DT_BCM96358NB4SER
- bool "BCM96358NB4SER"
- select BUILTIN_DTB
-
config DT_BCM96368MVWG
bool "BCM96368MVWG"
select BUILTIN_DTB
@@ -65,6 +61,22 @@ config DT_BCM97435SVMB
bool "BCM97435SVMB"
select BUILTIN_DTB
+config DT_COMTREND_VR3032U
+ bool "Comtrend VR-3032u"
+ select BUILTIN_DTB
+
+config DT_NETGEAR_CVG834G
+ bool "NETGEAR CVG834G"
+ select BUILTIN_DTB
+
+config DT_SFR_NEUFBOX4_SERCOMM
+ bool "SFR Neufbox 4 (Sercomm)"
+ select BUILTIN_DTB
+
+config DT_SFR_NEUFBOX6_SERCOMM
+ bool "SFR Neufbox 6 (Sercomm)"
+ select BUILTIN_DTB
+
endchoice
endif
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 6776042679dd..3b6f687f177c 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -17,6 +17,7 @@
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
+#include <linux/libfdt.h>
#include <linux/smp.h>
#include <asm/addrspace.h>
#include <asm/bmips.h>
@@ -98,7 +99,7 @@ static void bcm6328_quirks(void)
static void bcm6358_quirks(void)
{
/*
- * BCM6358 needs special handling for its shared TLB, so
+ * BCM3368/BCM6358 need special handling for their shared TLB, so
* disable SMP for now
*/
bmips_smp_enabled = 0;
@@ -110,10 +111,12 @@ static void bcm6368_quirks(void)
}
static const struct bmips_quirk bmips_quirk_list[] = {
+ { "brcm,bcm3368", &bcm6358_quirks },
{ "brcm,bcm3384-viper", &bcm3384_viper_quirks },
{ "brcm,bcm33843-viper", &bcm3384_viper_quirks },
{ "brcm,bcm6328", &bcm6328_quirks },
{ "brcm,bcm6358", &bcm6358_quirks },
+ { "brcm,bcm6362", &bcm6368_quirks },
{ "brcm,bcm6368", &bcm6368_quirks },
{ "brcm,bcm63168", &bcm6368_quirks },
{ "brcm,bcm63268", &bcm6368_quirks },
@@ -150,6 +153,8 @@ void __init plat_time_init(void)
mips_hpt_frequency = freq;
}
+extern const char __appended_dtb;
+
void __init plat_mem_setup(void)
{
void *dtb;
@@ -159,6 +164,11 @@ void __init plat_mem_setup(void)
ioport_resource.start = 0;
ioport_resource.end = ~0;
+#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
+ if (!fdt_check_header(&__appended_dtb))
+ dtb = (void *)&__appended_dtb;
+ else
+#endif
/* intended to somewhat resemble ARM; see Documentation/arm/Booting */
if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
dtb = phys_to_virt(fw_arg2);
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index acb1988f354e..2728a9a9c7c5 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -100,3 +100,69 @@ $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
$(obj)/uImage: $(obj)/uImage.$(suffix-y)
@ln -sf $(notdir $<) $@
@echo ' Image $@ is ready'
+
+#
+# Flattened Image Tree (.itb) images
+#
+
+targets += vmlinux.itb
+targets += vmlinux.gz.itb
+targets += vmlinux.bz2.itb
+targets += vmlinux.lzma.itb
+targets += vmlinux.lzo.itb
+
+ifeq ($(ADDR_BITS),32)
+ itb_addr_cells = 1
+endif
+ifeq ($(ADDR_BITS),64)
+ itb_addr_cells = 2
+endif
+
+quiet_cmd_cpp_its_S = ITS $@
+ cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
+ -DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
+ -DVMLINUX_BINARY="\"$(3)\"" \
+ -DVMLINUX_COMPRESSION="\"$(2)\"" \
+ -DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
+ -DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS) \
+ -DADDR_BITS=$(ADDR_BITS) \
+ -DADDR_CELLS=$(itb_addr_cells)
+
+$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
+
+$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
+
+$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
+
+$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
+
+$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
+
+quiet_cmd_itb-image = ITB $@
+ cmd_itb-image = \
+ env PATH="$(objtree)/scripts/dtc:$(PATH)" \
+ $(CONFIG_SHELL) $(MKIMAGE) \
+ -D "-I dts -O dtb -p 500 \
+ --include $(objtree)/arch/mips \
+ --warning no-unit_address_vs_reg" \
+ -f $(2) $@
+
+$(obj)/vmlinux.itb: $(obj)/vmlinux.its $(obj)/vmlinux.bin FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.gz.itb: $(obj)/vmlinux.gz.its $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.bz2.itb: $(obj)/vmlinux.bz2.its $(obj)/vmlinux.bin.bz2 FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzma.itb: $(obj)/vmlinux.lzma.its $(obj)/vmlinux.bin.lzma FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzo.itb: $(obj)/vmlinux.lzo.its $(obj)/vmlinux.bin.lzo FORCE
+ $(call if_changed,itb-image,$<)
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index fda9d387cc08..d61bc2aebf69 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -1,6 +1,5 @@
dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb
dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb
-dtb-$(CONFIG_DT_BCM96358NB4SER) += bcm96358nb4ser.dtb
dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb
dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb
dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb
@@ -11,20 +10,29 @@ dtb-$(CONFIG_DT_BCM97362SVMB) += bcm97362svmb.dtb
dtb-$(CONFIG_DT_BCM97420C) += bcm97420c.dtb
dtb-$(CONFIG_DT_BCM97425SVMB) += bcm97425svmb.dtb
dtb-$(CONFIG_DT_BCM97435SVMB) += bcm97435svmb.dtb
+dtb-$(CONFIG_DT_COMTREND_VR3032U) += bcm63268-comtrend-vr-3032u.dtb
+dtb-$(CONFIG_DT_NETGEAR_CVG834G) += bcm3368-netgear-cvg834g.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX4_SERCOMM) += bcm6358-neufbox4-sercomm.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX6_SERCOMM) += bcm6362-neufbox6-sercomm.dtb
-dtb-$(CONFIG_DT_NONE) += \
- bcm93384wvg.dtb \
- bcm93384wvg_viper.dtb \
- bcm96358nb4ser.dtb \
- bcm96368mvwg.dtb \
- bcm9ejtagprb.dtb \
- bcm97125cbmb.dtb \
- bcm97346dbsmb.dtb \
- bcm97358svmb.dtb \
- bcm97360svmb.dtb \
- bcm97362svmb.dtb \
- bcm97420c.dtb \
- bcm97425svmb.dtb
+dtb-$(CONFIG_DT_NONE) += \
+ bcm3368-netgear-cvg834g.dtb \
+ bcm6358-neufbox4-sercomm.dtb \
+ bcm6362-neufbox6-sercomm.dtb \
+ bcm63268-comtrend-vr-3032u.dtb \
+ bcm93384wvg.dtb \
+ bcm93384wvg_viper.dtb \
+ bcm96358nb4ser.dtb \
+ bcm96368mvwg.dtb \
+ bcm9ejtagprb.dtb \
+ bcm97125cbmb.dtb \
+ bcm97346dbsmb.dtb \
+ bcm97358svmb.dtb \
+ bcm97360svmb.dtb \
+ bcm97362svmb.dtb \
+ bcm97420c.dtb \
+ bcm97425svmb.dtb \
+ bcm97435svmb.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
new file mode 100644
index 000000000000..2f2e80fdcde8
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm3368.dtsi"
+
+/ {
+ compatible = "netgear,cvg834g", "brcm,bcm3368";
+ model = "NETGEAR CVG834G";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
new file mode 100644
index 000000000000..bee855cb8073
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -0,0 +1,101 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm3368";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <150000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ periph_cntl: syscon@fff8c000 {
+ compatible = "syscon";
+ reg = <0xfff8c000 0xc>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@fff8c008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x8>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@fff8c00c {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0xfff8c00c 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
+
+ uart0: serial@fff8c100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0xfff8c100 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@fff8c120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0xfff8c120 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <3>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
new file mode 100644
index 000000000000..430d35ca33d5
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "bcm63268.dtsi"
+
+/ {
+ compatible = "comtrend,vr-3032u", "brcm,bcm63268";
+ model = "Comtrend VR-3032u";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&leds0 {
+ status = "ok";
+ brcm,serial-leds;
+ brcm,serial-dat-low;
+ brcm,serial-shift-inv;
+
+ led@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0>;
+ /* GPHY0 Speed 0 */
+ };
+ led@1 {
+ reg = <1>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <1>;
+ /* GPHY0 Speed 1 */
+ };
+ led@2 {
+ reg = <2>;
+ active-low;
+ label = "vr-3032u:red:inet";
+ };
+ led@3 {
+ reg = <3>;
+ active-low;
+ label = "vr-3032u:green:dsl";
+ };
+ led@4 {
+ reg = <4>;
+ active-low;
+ label = "vr-3032u:green:usb";
+ };
+ led@7 {
+ reg = <7>;
+ active-low;
+ label = "vr-3032u:green:wps";
+ };
+ led@8 {
+ reg = <8>;
+ active-low;
+ label = "vr-3032u:green:inet";
+ };
+ led@9 {
+ reg = <9>;
+ brcm,hardware-controlled;
+ /* EPHY0 Activity */
+ };
+ led@10 {
+ reg = <10>;
+ brcm,hardware-controlled;
+ /* EPHY1 Activity */
+ };
+ led@11 {
+ reg = <11>;
+ brcm,hardware-controlled;
+ /* EPHY2 Activity */
+ };
+ led@12 {
+ reg = <12>;
+ brcm,hardware-controlled;
+ /* GPHY0 Activity */
+ };
+ led@13 {
+ reg = <13>;
+ brcm,hardware-controlled;
+ /* EPHY0 Speed */
+ };
+ led@14 {
+ reg = <14>;
+ brcm,hardware-controlled;
+ /* EPHY1 Speed */
+ };
+ led@15 {
+ reg = <15>;
+ brcm,hardware-controlled;
+ /* EPHY2 Speed */
+ };
+ led@20 {
+ reg = <20>;
+ active-low;
+ label = "vr-3032u:green:power";
+ default-state = "on";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
new file mode 100644
index 000000000000..7e6bf2cc0287
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -0,0 +1,134 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm63268";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <200000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ periph_cntl: syscon@10000000 {
+ compatible = "syscon";
+ reg = <0x10000000 0x14>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@10000008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x8>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x20>,
+ <0x10000040 0x20>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ uart0: serial@10000180 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000180 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <5>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@100001a0 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x100001a0 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <34>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+
+ leds0: led-controller@10001900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-leds";
+ reg = <0x10001900 0x24>;
+
+ status = "disabled";
+ };
+
+ ehci: usb@10002500 {
+ compatible = "brcm,bcm63268-ehci", "generic-ehci";
+ reg = <0x10002500 0x100>;
+ big-endian;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <10>;
+
+ status = "disabled";
+ };
+
+ ohci: usb@10002600 {
+ compatible = "brcm,bcm63268-ohci", "generic-ohci";
+ reg = <0x10002600 0x100>;
+ big-endian;
+ no-big-frame-no;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <9>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
index f412117972e6..702eae2a22a0 100644
--- a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
+++ b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
@@ -12,6 +12,7 @@
};
chosen {
+ bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
new file mode 100644
index 000000000000..480f2a5bf1da
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm6362.dtsi"
+
+/ {
+ compatible = "sfr,nb6-ser", "brcm,bcm6362";
+ model = "SFR NeufBox 6 (Sercomm)";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
new file mode 100644
index 000000000000..c507da594f2f
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -0,0 +1,134 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6362";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <200000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ periph_cntl: syscon@10000000 {
+ compatible = "syscon";
+ reg = <0x10000000 0x14>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@10000008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x8>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x10>,
+ <0x10000030 0x10>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ uart0: serial@10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <3>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@10000120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000120 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <4>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+
+ leds0: led-controller@10001900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-leds";
+ reg = <0x10001900 0x24>;
+
+ status = "disabled";
+ };
+
+ ehci: usb@10002500 {
+ compatible = "brcm,bcm6362-ehci", "generic-ehci";
+ reg = <0x10002500 0x100>;
+ big-endian;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <10>;
+
+ status = "disabled";
+ };
+
+ ohci: usb@10002600 {
+ compatible = "brcm,bcm6362-ohci", "generic-ohci";
+ reg = <0x10002600 0x100>;
+ big-endian;
+ no-big-frame-no;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <9>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
index 550e1d9e3ee0..bbd00f65ce39 100644
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -26,7 +26,7 @@
uart0 = &uart0;
};
- cpu_intc: cpu_intc {
+ cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -49,7 +55,7 @@
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
- periph_intc: periph_intc@441400 {
+ periph_intc: interrupt-controller@441400 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x441400 0x30>, <0x441600 0x30>;
@@ -60,7 +66,7 @@
interrupts = <2>, <3>;
};
- sun_l2_intc: sun_l2_intc@401800 {
+ sun_l2_intc: interrupt-controller@401800 {
compatible = "brcm,l2-intc";
reg = <0x401800 0x30>;
interrupt-controller;
@@ -81,7 +87,7 @@
"avd_0", "jtag_0";
};
- upg_irq0_intc: upg_irq0_intc@406780 {
+ upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
@@ -183,6 +189,26 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 18>;
+ };
+
ehci0: usb@488300 {
compatible = "brcm,bcm7125-ehci", "generic-ehci";
reg = <0x488300 0x100>;
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index ec959061d52e..4bbcc95f1c15 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -26,7 +26,7 @@
uart0 = &uart0;
};
- cpu_intc: cpu_intc {
+ cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -49,7 +55,7 @@
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
- periph_intc: periph_intc@411400 {
+ periph_intc: interrupt-controller@411400 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x411400 0x30>, <0x411600 0x30>;
@@ -60,7 +66,7 @@
interrupts = <2>, <3>;
};
- sun_l2_intc: sun_l2_intc@403000 {
+ sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc";
reg = <0x403000 0x30>;
interrupt-controller;
@@ -81,7 +87,7 @@
"jtag_0", "svd_0";
};
- upg_irq0_intc: upg_irq0_intc@406780 {
+ upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
@@ -96,7 +102,7 @@
interrupt-names = "upg_main", "upg_bsc";
};
- upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+ upg_aon_irq0_intc: interrupt-controller@408b80 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x408b80 0x8>;
@@ -210,6 +216,59 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406800 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406800 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <53>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 16>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <27 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
@@ -313,6 +372,26 @@
status = "disabled";
};
+ hif_l2_intc: interrupt-controller@411000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ };
+
+ nand: nand@412800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand";
+ reg = <0x412800 0x400>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl";
@@ -352,5 +431,13 @@
#phy-cells = <0>;
};
};
+
+ sdhci0: sdhci@413500 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x413500 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <85>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index ca57fb5eb122..3e42535c8d29 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -20,7 +20,7 @@
uart0 = &uart0;
};
- cpu_intc: cpu_intc {
+ cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
@@ -34,6 +34,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -43,7 +49,7 @@
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
- periph_intc: periph_intc@411400 {
+ periph_intc: interrupt-controller@411400 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x411400 0x30>;
@@ -54,7 +60,7 @@
interrupts = <2>;
};
- sun_l2_intc: sun_l2_intc@403000 {
+ sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc";
reg = <0x403000 0x30>;
interrupt-controller;
@@ -75,7 +81,7 @@
"avd_0", "jtag_0";
};
- upg_irq0_intc: upg_irq0_intc@406600 {
+ upg_irq0_intc: interrupt-controller@406600 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406600 0x8>;
@@ -90,7 +96,7 @@
interrupt-names = "upg_main", "upg_bsc";
};
- upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+ upg_aon_irq0_intc: interrupt-controller@408b80 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x408b80 0x8>;
@@ -194,6 +200,59 @@
status = "disabled";
};
+ pwma: pwm@406400 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406400 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406700 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406700 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408240 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408240 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
@@ -239,5 +298,25 @@
interrupts = <66>;
status = "disabled";
};
+
+ hif_l2_intc: interrupt-controller@411000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ };
+
+ nand: nand@412800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand";
+ reg = <0x412800 0x400>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index 1c0c3d438c7a..112a5571c596 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -20,7 +20,7 @@
uart0 = &uart0;
};
- cpu_intc: cpu_intc {
+ cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
@@ -34,6 +34,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -43,7 +49,7 @@
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
- periph_intc: periph_intc@411400 {
+ periph_intc: interrupt-controller@411400 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x411400 0x30>;
@@ -54,7 +60,7 @@
interrupts = <2>;
};
- sun_l2_intc: sun_l2_intc@403000 {
+ sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc";
reg = <0x403000 0x30>;
interrupt-controller;
@@ -75,7 +81,7 @@
"avd_0", "jtag_0";
};
- upg_irq0_intc: upg_irq0_intc@406600 {
+ upg_irq0_intc: interrupt-controller@406600 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406600 0x8>;
@@ -90,7 +96,7 @@
interrupt-names = "upg_main", "upg_bsc";
};
- upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+ upg_aon_irq0_intc: interrupt-controller@408b80 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x408b80 0x8>;
@@ -194,6 +200,51 @@
status = "disabled";
};
+ pwma: pwm@406400 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406400 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
@@ -240,6 +291,26 @@
status = "disabled";
};
+ hif_l2_intc: interrupt-controller@411000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ };
+
+ nand: nand@412800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand";
+ reg = <0x412800 0x400>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl";
@@ -279,5 +350,13 @@
#phy-cells = <0>;
};
};
+
+ sdhci0: sdhci@410000 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x410000 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <82>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index 6b4713add4b8..34abfb0b07e7 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -26,7 +26,7 @@
uart0 = &uart0;
};
- cpu_intc: cpu_intc {
+ cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -49,7 +55,7 @@
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
- periph_intc: periph_intc@411400 {
+ periph_intc: interrupt-controller@411400 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x411400 0x30>, <0x411600 0x30>;
@@ -60,7 +66,7 @@
interrupts = <2>, <3>;
};
- sun_l2_intc: sun_l2_intc@403000 {
+ sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc";
reg = <0x403000 0x30>;
interrupt-controller;
@@ -81,7 +87,7 @@
"avd_0", "jtag_0";
};
- upg_irq0_intc: upg_irq0_intc@406600 {
+ upg_irq0_intc: interrupt-controller@406600 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406600 0x8>;
@@ -96,7 +102,7 @@
interrupt-names = "upg_main", "upg_bsc";
};
- upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+ upg_aon_irq0_intc: interrupt-controller@408b80 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x408b80 0x8>;
@@ -190,6 +196,51 @@
status = "disabled";
};
+ pwma: pwm@406400 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406400 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
@@ -236,6 +287,26 @@
status = "disabled";
};
+ hif_l2_intc: interrupt-controller@411000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ };
+
+ nand: nand@412800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand";
+ reg = <0x412800 0x400>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl";
@@ -275,5 +346,13 @@
#phy-cells = <0>;
};
};
+
+ sdhci0: sdhci@410000 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x410000 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <82>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
index 0586bf662571..b143723c674e 100644
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -26,7 +26,7 @@
uart0 = &uart0;
};
- cpu_intc: cpu_intc {
+ cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -49,7 +55,7 @@
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
- periph_intc: periph_intc@441400 {
+ periph_intc: interrupt-controller@441400 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x441400 0x30>, <0x441600 0x30>;
@@ -60,7 +66,7 @@
interrupts = <2>, <3>;
};
- sun_l2_intc: sun_l2_intc@401800 {
+ sun_l2_intc: interrupt-controller@401800 {
compatible = "brcm,l2-intc";
reg = <0x401800 0x30>;
interrupt-controller;
@@ -82,7 +88,7 @@
"jtag_0";
};
- upg_irq0_intc: upg_irq0_intc@406780 {
+ upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
@@ -191,6 +197,34 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406880 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406880 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 27>;
+ };
+
enet0: ethernet@468000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index c1c15edaf829..2488d2f61f60 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -26,7 +26,7 @@
uart0 = &uart0;
};
- cpu_intc: cpu_intc {
+ cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -49,7 +55,7 @@
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
- periph_intc: periph_intc@41a400 {
+ periph_intc: interrupt-controller@41a400 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x41a400 0x30>, <0x41a600 0x30>;
@@ -60,7 +66,7 @@
interrupts = <2>, <3>;
};
- sun_l2_intc: sun_l2_intc@403000 {
+ sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc";
reg = <0x403000 0x30>;
interrupt-controller;
@@ -83,7 +89,7 @@
"vice_0";
};
- upg_irq0_intc: upg_irq0_intc@406780 {
+ upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
@@ -98,7 +104,7 @@
interrupt-names = "upg_main", "upg_bsc";
};
- upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+ upg_aon_irq0_intc: interrupt-controller@409480 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x409480 0x8>;
@@ -209,6 +215,59 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406800 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406800 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <49>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 21>;
+ };
+
+ upg_gio_aon: gpio@4094c0 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x4094c0 0x40>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
@@ -312,6 +371,26 @@
status = "disabled";
};
+ hif_l2_intc: interrupt-controller@41a000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x41a000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <24>;
+ };
+
+ nand: nand@41b800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand";
+ reg = <0x41b800 0x400>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl";
@@ -351,5 +430,25 @@
#phy-cells = <0>;
};
};
+
+ sdhci0: sdhci@419000 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x419000 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <43>;
+ sd-uhs-sdr50;
+ mmc-hs200-1_8v;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@419200 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x419200 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <44>;
+ sd-uhs-sdr50;
+ mmc-hs200-1_8v;
+ status = "disabled";
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index a874d3a0e2ee..19fa259b968b 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -38,7 +38,7 @@
uart0 = &uart0;
};
- cpu_intc: cpu_intc {
+ cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
@@ -52,6 +52,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -61,7 +67,7 @@
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
- periph_intc: periph_intc@41b500 {
+ periph_intc: interrupt-controller@41b500 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x41b500 0x40>, <0x41b600 0x40>,
<0x41b700 0x40>, <0x41b800 0x40>;
@@ -73,7 +79,7 @@
interrupts = <2>, <3>, <2>, <3>;
};
- sun_l2_intc: sun_l2_intc@403000 {
+ sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc";
reg = <0x403000 0x30>;
interrupt-controller;
@@ -98,7 +104,7 @@
"scpu";
};
- upg_irq0_intc: upg_irq0_intc@406780 {
+ upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
@@ -113,7 +119,7 @@
interrupt-names = "upg_main", "upg_bsc";
};
- upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+ upg_aon_irq0_intc: interrupt-controller@409480 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x409480 0x8>;
@@ -224,6 +230,59 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406800 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406800 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <54>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 21>;
+ };
+
+ upg_gio_aon: gpio@4094c0 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x4094c0 0x40>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
@@ -327,6 +386,26 @@
status = "disabled";
};
+ hif_l2_intc: interrupt-controller@41b000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x41b000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <24>;
+ };
+
+ nand: nand@41c800 {
+ compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand", "flash-dma";
+ reg = <0x41c800 0x600>, <0x41d000 0x100>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>, <4>;
+ status = "disabled";
+ };
+
sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl";
@@ -366,5 +445,25 @@
#phy-cells = <0>;
};
};
+
+ sdhci0: sdhci@41a000 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x41a000 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <47>;
+ sd-uhs-sdr50;
+ mmc-hs200-1_8v;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@41a200 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x41a200 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <48>;
+ sd-uhs-sdr50;
+ mmc-hs200-1_8v;
+ status = "disabled";
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
index f2449d147c6d..5c24eacd72dd 100644
--- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -45,6 +45,10 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
/* FIXME: USB is wonky; disable it for now */
&ehci0 {
status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index d3d28816a027..e67eaf30de3d 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "bcm7346.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
/ {
compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
@@ -49,6 +50,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
@@ -85,6 +94,10 @@
status = "okay";
};
+&nand {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
@@ -92,3 +105,7 @@
&sata_phy {
status = "okay";
};
+
+&sdhci0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index 02ce6b429dc4..ee4607fae47a 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "bcm7358.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
/ {
compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
@@ -45,6 +46,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
@@ -56,3 +65,7 @@
&ohci0 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 73124be9548a..bed821b03013 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -45,6 +45,10 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
@@ -64,3 +68,7 @@
&sata_phy {
status = "okay";
};
+
+&sdhci0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index 3cfcaebe7f79..68fd823868e0 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "bcm7362.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
/ {
compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
@@ -41,6 +42,10 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
@@ -53,6 +58,10 @@
status = "okay";
};
+&nand {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
@@ -60,3 +69,7 @@
&sata_phy {
status = "okay";
};
+
+&sdhci0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
index 600d57abee05..e66271af055e 100644
--- a/arch/mips/boot/dts/brcm/bcm97420c.dts
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -51,6 +51,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
/* FIXME: MAC driver comes up but cannot attach to PHY */
&enet0 {
status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 119c714805cb..f95ba1bf3e58 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "bcm7425.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
/ {
compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
@@ -51,6 +52,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
@@ -86,3 +95,15 @@
&ohci3 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 43e3ba27f07b..fb37b7111bf4 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "bcm7435.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
/ {
compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
@@ -51,6 +52,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
@@ -87,6 +96,10 @@
status = "okay";
};
+&nand {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
@@ -94,3 +107,11 @@
&sata_phy {
status = "okay";
};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
new file mode 100644
index 000000000000..3c24f97de922
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
@@ -0,0 +1,25 @@
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <1>;
+ nand-on-flash-bbt;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+ brcm,nand-oob-sector-size = <27>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1.rootfs@0 {
+ reg = <0x0 0x10000000>;
+ };
+
+ flash1.kernel@10000000 {
+ reg = <0x10000000 0x400000>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
new file mode 100644
index 000000000000..cb531816ef4c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
@@ -0,0 +1,25 @@
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <1>;
+ nand-on-flash-bbt;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ brcm,nand-oob-sector-size = <16>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1.rootfs@0 {
+ reg = <0x0 0x10000000>;
+ };
+
+ flash1.kernel@10000000 {
+ reg = <0x10000000 0x400000>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
index b134798a0fd7..cfa29156eb69 100644
--- a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
@@ -8,55 +8,16 @@
* published by the Free Software Foundation.
*/
-/include/ "octeon_3xxx.dtsi"
+/include/ "dlink_dsr-500n-1000n.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "dlink,dsr-1000n";
soc@0 {
- smi0: mdio@1180000001800 {
- phy8: ethernet-phy@8 {
- reg = <8>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- };
-
- pip: pip@11800a0000000 {
- interface@0 {
- ethernet@0 {
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- ethernet@1 {
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- ethernet@2 {
- phy-handle = <&phy8>;
- };
- };
- };
-
- twsi0: i2c@1180000001000 {
- rtc@68 {
- compatible = "dallas,ds1337";
- reg = <0x68>;
- };
- };
-
uart0: serial@1180000000800 {
clock-frequency = <500000000>;
};
-
- usbn: usbn@1180068000000 {
- refclk-frequency = <12000000>;
- refclk-type = "crystal";
- };
};
leds {
@@ -87,8 +48,4 @@
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
-
- aliases {
- pip = &pip;
- };
};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
new file mode 100644
index 000000000000..246b598201f8
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Device tree source for D-Link DSR-500N/1000N (common parts).
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+ soc@0 {
+ smi0: mdio@1180000001800 {
+ phy8: ethernet-phy@8 {
+ reg = <8>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ };
+
+ pip: pip@11800a0000000 {
+ interface@0 {
+ ethernet@0 {
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ ethernet@1 {
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ ethernet@2 {
+ phy-handle = <&phy8>;
+ };
+ };
+ };
+
+ twsi0: i2c@1180000001000 {
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+ };
+
+ usbn: usbn@1180068000000 {
+ refclk-frequency = <12000000>;
+ refclk-type = "crystal";
+ };
+ };
+
+ aliases {
+ pip = &pip;
+ };
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
new file mode 100644
index 000000000000..78886e172c48
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
@@ -0,0 +1,40 @@
+/*
+ * Device tree source for D-Link DSR-500N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "dlink,dsr-500n";
+ compatible = "dlink,dsr-500n", "cavium,octeon-3860";
+
+ soc@0 {
+ uart0: serial@1180000000800 {
+ clock-frequency = <300000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless {
+ label = "2.4g";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
index 144d776cc9f2..fcabd69b7030 100644
--- a/arch/mips/boot/dts/mti/Makefile
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_MIPS_MALTA) += malta.dtb
-dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
+dtb-$(CONFIG_LEGACY_BOARD_SEAD3) += sead3.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
index b18c46637d21..f604a272d91d 100644
--- a/arch/mips/boot/dts/mti/malta.dts
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -1,5 +1,8 @@
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
/memreserve/ 0x00000000 0x00001000; /* YAMON exception vectors */
/memreserve/ 0x00001000 0x000ef000; /* YAMON */
/memreserve/ 0x000f0000 0x00010000; /* PIIX4 ISA memory */
@@ -8,4 +11,100 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "mti,malta";
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gic: interrupt-controller@1bdc0000 {
+ compatible = "mti,gic";
+ reg = <0x1bdc0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ /*
+ * Declare the interrupt-parent even though the mti,gic
+ * binding doesn't require it, such that the kernel can
+ * figure out that cpu_intc is the root interrupt
+ * controller & should be probed first.
+ */
+ interrupt-parent = <&cpu_intc>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ };
+ };
+
+ i8259: interrupt-controller@20 {
+ compatible = "intel,i8259";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ flash@1e000000 {
+ compatible = "intel,dt28f160", "cfi-flash";
+ reg = <0x1e000000 0x400000>;
+ bank-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ yamon@0 {
+ label = "YAMON";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ user-fs@100000 {
+ label = "User FS";
+ reg = <0x100000 0x2e0000>;
+ };
+
+ board-config@3e0000 {
+ label = "Board Config";
+ reg = <0x3e0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+
+ fpga_regs: system-controller@1f000000 {
+ compatible = "mti,malta-fpga", "syscon", "simple-mfd";
+ reg = <0x1f000000 0x1000>;
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&fpga_regs>;
+ offset = <0x500>;
+ mask = <0x4d>;
+ };
+ };
+
+ isa {
+ compatible = "isa";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0 0x1000>;
+
+ rtc@70 {
+ compatible = "motorola,mc146818";
+ reg = <1 0x70 0x8>;
+
+ interrupt-parent = <&i8259>;
+ interrupts = <8>;
+ };
+ };
};
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index e4b317d414f1..b112879a5d9d 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -4,10 +4,23 @@
/memreserve/ 0x00001000 0x000ef000; // ROM data
/memreserve/ 0x000f0000 0x004cc000; // reserved
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mti,sead-3";
+ model = "MIPS SEAD-3";
+ interrupt-parent = <&gic>;
+
+ chosen {
+ stdout-path = "uart1:115200";
+ };
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ };
cpus {
cpu@0 {
@@ -19,4 +32,229 @@
device_type = "memory";
reg = <0x0 0x08000000>;
};
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gic: interrupt-controller@1b1c0000 {
+ compatible = "mti,gic";
+ reg = <0x1b1c0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ /*
+ * Declare the interrupt-parent even though the mti,gic
+ * binding doesn't require it, such that the kernel can
+ * figure out that cpu_intc is the root interrupt
+ * controller & should be probed first.
+ */
+ interrupt-parent = <&cpu_intc>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ };
+ };
+
+ ehci@1b200000 {
+ compatible = "generic-ehci";
+ reg = <0x1b200000 0x1000>;
+
+ interrupts = <0>; /* GIC 0 or CPU 6 */
+
+ has-transaction-translator;
+ };
+
+ flash@1c000000 {
+ compatible = "intel,28f128j3", "cfi-flash";
+ reg = <0x1c000000 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ user-fs@0 {
+ label = "User FS";
+ reg = <0x0 0x1fc0000>;
+ };
+
+ board-config@3e0000 {
+ label = "Board Config";
+ reg = <0x1fc0000 0x40000>;
+ };
+ };
+ };
+
+ fpga_regs: system-controller@1f000000 {
+ compatible = "mti,sead3-fpga", "syscon", "simple-mfd";
+ reg = <0x1f000000 0x200>;
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&fpga_regs>;
+ offset = <0x50>;
+ mask = <0x4d>;
+ };
+
+ poweroff {
+ compatible = "restart-poweroff";
+ };
+ };
+
+ system-controller@1f000200 {
+ compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+ reg = <0x1f000200 0x300>;
+
+ led@10.0 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x1>;
+ label = "pled0";
+ };
+ led@10.1 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x2>;
+ label = "pled1";
+ };
+ led@10.2 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x4>;
+ label = "pled2";
+ };
+ led@10.3 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x8>;
+ label = "pled3";
+ };
+ led@10.4 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x10>;
+ label = "pled4";
+ };
+ led@10.5 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x20>;
+ label = "pled5";
+ };
+ led@10.6 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x40>;
+ label = "pled6";
+ };
+ led@10.7 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x80>;
+ label = "pled7";
+ };
+
+ led@18.0 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x1>;
+ label = "fled0";
+ };
+ led@18.1 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x2>;
+ label = "fled1";
+ };
+ led@18.2 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x4>;
+ label = "fled2";
+ };
+ led@18.3 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x8>;
+ label = "fled3";
+ };
+ led@18.4 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x10>;
+ label = "fled4";
+ };
+ led@18.5 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x20>;
+ label = "fled5";
+ };
+ led@18.6 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x40>;
+ label = "fled6";
+ };
+ led@18.7 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x80>;
+ label = "fled7";
+ };
+
+ lcd@200 {
+ compatible = "mti,sead3-lcd";
+ offset = <0x200>;
+ };
+ };
+
+ /* UART connected to FTDI & miniUSB socket */
+ uart0: uart@1f000900 {
+ compatible = "ns16550a";
+ reg = <0x1f000900 0x20>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ clock-frequency = <14745600>;
+
+ interrupts = <3>; /* GIC 3 or CPU 4 */
+
+ no-loopback-test;
+ };
+
+ /* UART connected to RS232 socket */
+ uart1: uart@1f000800 {
+ compatible = "ns16550a";
+ reg = <0x1f000800 0x20>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ clock-frequency = <14745600>;
+
+ interrupts = <2>; /* GIC 2 or CPU 4 */
+
+ no-loopback-test;
+ };
+
+ eth@1f010000 {
+ compatible = "smsc,lan9115";
+ reg = <0x1f010000 0x10000>;
+ reg-io-width = <4>;
+
+ interrupts = <0>; /* GIC 0 or CPU 6 */
+
+ phy-mode = "mii";
+ smsc,irq-push-pull;
+ smsc,save-mac-address;
+ };
};
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index ff49fc04500c..ab8362e04461 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -36,8 +36,6 @@
#include <asm/octeon/cvmx-config.h>
-#include <asm/octeon/cvmx-mdio.h>
-
#include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-helper-util.h>
#include <asm/octeon/cvmx-helper-board.h>
@@ -46,17 +44,6 @@
#include <asm/octeon/cvmx-asxx-defs.h>
/**
- * cvmx_override_board_link_get(int ipd_port) is a function
- * pointer. It is meant to allow customization of the process of
- * talking to a PHY to determine link speed. It is called every
- * time a PHY must be polled for link status. Users should set
- * this pointer to a function before calling any cvmx-helper
- * operations.
- */
-cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) =
- NULL;
-
-/**
* Return the MII PHY address associated with the given IPD
* port. A result of -1 means there isn't a MII capable PHY
* connected to this port. On chips supporting multiple MII
@@ -222,12 +209,6 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
{
cvmx_helper_link_info_t result;
- int phy_addr;
- int is_broadcom_phy = 0;
-
- /* Give the user a chance to override the processing of this function */
- if (cvmx_override_board_link_get)
- return cvmx_override_board_link_get(ipd_port);
/* Unless we fix it later, all links are defaulted to down */
result.u64 = 0;
@@ -263,8 +244,7 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
result.s.full_duplex = 1;
result.s.speed = 1000;
return result;
- } else /* The other port uses a broadcom PHY */
- is_broadcom_phy = 1;
+ }
break;
case CVMX_BOARD_TYPE_BBGW_REF:
/* Port 1 on these boards is always Gigabit */
@@ -282,108 +262,7 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
break;
}
- phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
- if (phy_addr != -1) {
- if (is_broadcom_phy) {
- /*
- * Below we are going to read SMI/MDIO
- * register 0x19 which works on Broadcom
- * parts
- */
- int phy_status =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- 0x19);
- switch ((phy_status >> 8) & 0x7) {
- case 0:
- result.u64 = 0;
- break;
- case 1:
- result.s.link_up = 1;
- result.s.full_duplex = 0;
- result.s.speed = 10;
- break;
- case 2:
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 10;
- break;
- case 3:
- result.s.link_up = 1;
- result.s.full_duplex = 0;
- result.s.speed = 100;
- break;
- case 4:
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 100;
- break;
- case 5:
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 100;
- break;
- case 6:
- result.s.link_up = 1;
- result.s.full_duplex = 0;
- result.s.speed = 1000;
- break;
- case 7:
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 1000;
- break;
- }
- } else {
- /*
- * This code assumes we are using a Marvell
- * Gigabit PHY. All the speed information can
- * be read from register 17 in one
- * go. Somebody using a different PHY will
- * need to handle it above in the board
- * specific area.
- */
- int phy_status =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
-
- /*
- * If the resolve bit 11 isn't set, see if
- * autoneg is turned off (bit 12, reg 0). The
- * resolve bit doesn't get set properly when
- * autoneg is off, so force it.
- */
- if ((phy_status & (1 << 11)) == 0) {
- int auto_status =
- cvmx_mdio_read(phy_addr >> 8,
- phy_addr & 0xff, 0);
- if ((auto_status & (1 << 12)) == 0)
- phy_status |= 1 << 11;
- }
-
- /*
- * Only return a link if the PHY has finished
- * auto negotiation and set the resolved bit
- * (bit 11)
- */
- if (phy_status & (1 << 11)) {
- result.s.link_up = 1;
- result.s.full_duplex = ((phy_status >> 13) & 1);
- switch ((phy_status >> 14) & 3) {
- case 0: /* 10 Mbps */
- result.s.speed = 10;
- break;
- case 1: /* 100 Mbps */
- result.s.speed = 100;
- break;
- case 2: /* 1 Gbps */
- result.s.speed = 1000;
- break;
- case 3: /* Illegal */
- result.u64 = 0;
- break;
- }
- }
- }
- } else if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
+ if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
|| OCTEON_IS_MODEL(OCTEON_CN58XX)
|| OCTEON_IS_MODEL(OCTEON_CN50XX)) {
/*
@@ -433,176 +312,6 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
}
/**
- * This function as a board specific method of changing the PHY
- * speed, duplex, and auto-negotiation. This programs the PHY and
- * not Octeon. This can be used to force Octeon's links to
- * specific settings.
- *
- * @phy_addr: The address of the PHY to program
- * @enable_autoneg:
- * Non zero if you want to enable auto-negotiation.
- * @link_info: Link speed to program. If the speed is zero and auto-negotiation
- * is enabled, all possible negotiation speeds are advertised.
- *
- * Returns Zero on success, negative on failure
- */
-int cvmx_helper_board_link_set_phy(int phy_addr,
- cvmx_helper_board_set_phy_link_flags_types_t
- link_flags,
- cvmx_helper_link_info_t link_info)
-{
-
- /* Set the flow control settings based on link_flags */
- if ((link_flags & set_phy_link_flags_flow_control_mask) !=
- set_phy_link_flags_flow_control_dont_touch) {
- cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
- reg_autoneg_adver.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
- reg_autoneg_adver.s.asymmetric_pause =
- (link_flags & set_phy_link_flags_flow_control_mask) ==
- set_phy_link_flags_flow_control_enable;
- reg_autoneg_adver.s.pause =
- (link_flags & set_phy_link_flags_flow_control_mask) ==
- set_phy_link_flags_flow_control_enable;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
- reg_autoneg_adver.u16);
- }
-
- /* If speed isn't set and autoneg is on advertise all supported modes */
- if ((link_flags & set_phy_link_flags_autoneg)
- && (link_info.s.speed == 0)) {
- cvmx_mdio_phy_reg_control_t reg_control;
- cvmx_mdio_phy_reg_status_t reg_status;
- cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
- cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
- cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
-
- reg_status.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_STATUS);
- reg_autoneg_adver.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
- reg_autoneg_adver.s.advert_100base_t4 =
- reg_status.s.capable_100base_t4;
- reg_autoneg_adver.s.advert_10base_tx_full =
- reg_status.s.capable_10_full;
- reg_autoneg_adver.s.advert_10base_tx_half =
- reg_status.s.capable_10_half;
- reg_autoneg_adver.s.advert_100base_tx_full =
- reg_status.s.capable_100base_x_full;
- reg_autoneg_adver.s.advert_100base_tx_half =
- reg_status.s.capable_100base_x_half;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
- reg_autoneg_adver.u16);
- if (reg_status.s.capable_extended_status) {
- reg_extended_status.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
- reg_control_1000.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL_1000);
- reg_control_1000.s.advert_1000base_t_full =
- reg_extended_status.s.capable_1000base_t_full;
- reg_control_1000.s.advert_1000base_t_half =
- reg_extended_status.s.capable_1000base_t_half;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL_1000,
- reg_control_1000.u16);
- }
- reg_control.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL);
- reg_control.s.autoneg_enable = 1;
- reg_control.s.restart_autoneg = 1;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
- } else if ((link_flags & set_phy_link_flags_autoneg)) {
- cvmx_mdio_phy_reg_control_t reg_control;
- cvmx_mdio_phy_reg_status_t reg_status;
- cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
- cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
-
- reg_status.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_STATUS);
- reg_autoneg_adver.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
- reg_autoneg_adver.s.advert_100base_t4 = 0;
- reg_autoneg_adver.s.advert_10base_tx_full = 0;
- reg_autoneg_adver.s.advert_10base_tx_half = 0;
- reg_autoneg_adver.s.advert_100base_tx_full = 0;
- reg_autoneg_adver.s.advert_100base_tx_half = 0;
- if (reg_status.s.capable_extended_status) {
- reg_control_1000.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL_1000);
- reg_control_1000.s.advert_1000base_t_full = 0;
- reg_control_1000.s.advert_1000base_t_half = 0;
- }
- switch (link_info.s.speed) {
- case 10:
- reg_autoneg_adver.s.advert_10base_tx_full =
- link_info.s.full_duplex;
- reg_autoneg_adver.s.advert_10base_tx_half =
- !link_info.s.full_duplex;
- break;
- case 100:
- reg_autoneg_adver.s.advert_100base_tx_full =
- link_info.s.full_duplex;
- reg_autoneg_adver.s.advert_100base_tx_half =
- !link_info.s.full_duplex;
- break;
- case 1000:
- reg_control_1000.s.advert_1000base_t_full =
- link_info.s.full_duplex;
- reg_control_1000.s.advert_1000base_t_half =
- !link_info.s.full_duplex;
- break;
- }
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
- reg_autoneg_adver.u16);
- if (reg_status.s.capable_extended_status)
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL_1000,
- reg_control_1000.u16);
- reg_control.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL);
- reg_control.s.autoneg_enable = 1;
- reg_control.s.restart_autoneg = 1;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
- } else {
- cvmx_mdio_phy_reg_control_t reg_control;
- reg_control.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL);
- reg_control.s.autoneg_enable = 0;
- reg_control.s.restart_autoneg = 1;
- reg_control.s.duplex = link_info.s.full_duplex;
- if (link_info.s.speed == 1000) {
- reg_control.s.speed_msb = 1;
- reg_control.s.speed_lsb = 0;
- } else if (link_info.s.speed == 100) {
- reg_control.s.speed_msb = 0;
- reg_control.s.speed_lsb = 1;
- } else if (link_info.s.speed == 10) {
- reg_control.s.speed_msb = 0;
- reg_control.s.speed_lsb = 0;
- }
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
- }
- return 0;
-}
-
-/**
* This function is called by cvmx_helper_interface_probe() after it
* determines the number of ports Octeon can support on a specific
* interface. This function is the per board location to override
@@ -676,48 +385,6 @@ int __cvmx_helper_board_hardware_enable(int interface)
0xc);
}
} else if (cvmx_sysinfo_get()->board_type ==
- CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
- /*
- * Broadcom PHYs require differnet ASX
- * clocks. Unfortunately many boards don't define a
- * new board Id and simply mangle the
- * CN3010_EVB_HS5
- */
- if (interface == 0) {
- /*
- * Some boards use a hacked up bootloader that
- * identifies them as CN3010_EVB_HS5
- * evaluation boards. This leads to all kinds
- * of configuration problems. Detect one
- * case, and print warning, while trying to do
- * the right thing.
- */
- int phy_addr = cvmx_helper_board_get_mii_address(0);
- if (phy_addr != -1) {
- int phy_identifier =
- cvmx_mdio_read(phy_addr >> 8,
- phy_addr & 0xff, 0x2);
- /* Is it a Broadcom PHY? */
- if (phy_identifier == 0x0143) {
- cvmx_dprintf("\n");
- cvmx_dprintf("ERROR:\n");
- cvmx_dprintf
- ("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
- cvmx_dprintf
- ("ERROR: The board type is mis-configured, and software malfunctions are likely.\n");
- cvmx_dprintf
- ("ERROR: All boards require a unique board type to identify them.\n");
- cvmx_dprintf("ERROR:\n");
- cvmx_dprintf("\n");
- cvmx_wait(1000000000);
- cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX
- (0, interface), 5);
- cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX
- (0, interface), 5);
- }
- }
- }
- } else if (cvmx_sysinfo_get()->board_type ==
CVMX_BOARD_TYPE_UBNT_E100) {
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
index f59c88ee9b31..671ab1db2727 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -33,8 +33,6 @@
#include <asm/octeon/cvmx-config.h>
-
-#include <asm/octeon/cvmx-mdio.h>
#include <asm/octeon/cvmx-pko.h>
#include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-helper-board.h>
@@ -243,8 +241,7 @@ int __cvmx_helper_rgmii_enable(int interface)
/* enable the ports now */
for (port = 0; port < num_ports; port++) {
union cvmx_gmxx_prtx_cfg gmx_cfg;
- cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port
- (interface, port));
+
gmx_cfg.u64 =
cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface));
gmx_cfg.s.en = 1;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
index 6f9609e63a65..54375340afe8 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -34,7 +34,6 @@
#include <asm/octeon/cvmx-config.h>
-#include <asm/octeon/cvmx-mdio.h>
#include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-helper-board.h>
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
index a56ee590de1f..d347fe13b666 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
@@ -234,8 +234,6 @@ int __cvmx_helper_xaui_enable(int interface)
cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64);
cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64);
- cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port(interface, 0));
-
/* (8) Enable packet reception */
xauiMiscCtl.s.gmxeno = 0;
cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index ff26d0217b87..6456af642471 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -841,7 +841,6 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
int retry_cnt;
int retry_loop_cnt;
int i;
- cvmx_helper_link_info_t link_info;
/* Save values for restore at end */
uint64_t prtx_cfg =
@@ -1002,15 +1001,6 @@ fix_ipd_exit:
(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
frame_max);
cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0);
- /* Set link to down so autonegotiation will set it up again */
- link_info.u64 = 0;
- cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info);
-
- /*
- * Bring the link back up as autonegotiation is not done in
- * user applications.
- */
- cvmx_helper_link_autoconf(FIX_IPD_OUTPORT);
CVMX_SYNC;
if (num_segs)
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 5537f95b28c9..9a2db1c013d9 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -65,7 +65,8 @@ EXPORT_SYMBOL(octeon_should_swizzle_table);
extern void pci_console_init(const char *arg);
#endif
-static unsigned long long MAX_MEMORY = 512ull << 20;
+static unsigned long long max_memory = ULLONG_MAX;
+static unsigned long long reserve_low_mem;
DEFINE_SEMAPHORE(octeon_bootbus_sem);
EXPORT_SYMBOL(octeon_bootbus_sem);
@@ -75,7 +76,6 @@ struct octeon_boot_descriptor *octeon_boot_desc_ptr;
struct cvmx_bootinfo *octeon_bootinfo;
EXPORT_SYMBOL(octeon_bootinfo);
-static unsigned long long RESERVE_LOW_MEM = 0ull;
#ifdef CONFIG_KEXEC
#ifdef CONFIG_SMP
/*
@@ -125,18 +125,18 @@ static void kexec_bootmem_init(uint64_t mem_size, uint32_t low_reserved_bytes)
bootmem_desc->major_version = CVMX_BOOTMEM_DESC_MAJ_VER;
bootmem_desc->minor_version = CVMX_BOOTMEM_DESC_MIN_VER;
- addr = (OCTEON_DDR0_BASE + RESERVE_LOW_MEM + low_reserved_bytes);
+ addr = (OCTEON_DDR0_BASE + reserve_low_mem + low_reserved_bytes);
bootmem_desc->head_addr = 0;
if (mem_size <= OCTEON_DDR0_SIZE) {
__cvmx_bootmem_phy_free(addr,
- mem_size - RESERVE_LOW_MEM -
+ mem_size - reserve_low_mem -
low_reserved_bytes, 0);
return;
}
__cvmx_bootmem_phy_free(addr,
- OCTEON_DDR0_SIZE - RESERVE_LOW_MEM -
+ OCTEON_DDR0_SIZE - reserve_low_mem -
low_reserved_bytes, 0);
mem_size -= OCTEON_DDR0_SIZE;
@@ -857,15 +857,15 @@ void __init prom_init(void)
/* Default to 64MB in the simulator to speed things up */
if (octeon_is_simulation())
- MAX_MEMORY = 64ull << 20;
+ max_memory = 64ull << 20;
arg = strstr(arcs_cmdline, "mem=");
if (arg) {
- MAX_MEMORY = memparse(arg + 4, &p);
- if (MAX_MEMORY == 0)
- MAX_MEMORY = 32ull << 30;
+ max_memory = memparse(arg + 4, &p);
+ if (max_memory == 0)
+ max_memory = 32ull << 30;
if (*p == '@')
- RESERVE_LOW_MEM = memparse(p + 1, &p);
+ reserve_low_mem = memparse(p + 1, &p);
}
arcs_cmdline[0] = 0;
@@ -875,11 +875,11 @@ void __init prom_init(void)
cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
if ((strncmp(arg, "MEM=", 4) == 0) ||
(strncmp(arg, "mem=", 4) == 0)) {
- MAX_MEMORY = memparse(arg + 4, &p);
- if (MAX_MEMORY == 0)
- MAX_MEMORY = 32ull << 30;
+ max_memory = memparse(arg + 4, &p);
+ if (max_memory == 0)
+ max_memory = 32ull << 30;
if (*p == '@')
- RESERVE_LOW_MEM = memparse(p + 1, &p);
+ reserve_low_mem = memparse(p + 1, &p);
#ifdef CONFIG_KEXEC
} else if (strncmp(arg, "crashkernel=", 12) == 0) {
crashk_size = memparse(arg+12, &p);
@@ -971,13 +971,13 @@ void __init plat_mem_setup(void)
* to consistently work.
*/
mem_alloc_size = 4 << 20;
- if (mem_alloc_size > MAX_MEMORY)
- mem_alloc_size = MAX_MEMORY;
+ if (mem_alloc_size > max_memory)
+ mem_alloc_size = max_memory;
/* Crashkernel ignores bootmem list. It relies on mem=X@Y option */
#ifdef CONFIG_CRASH_DUMP
- add_memory_region(RESERVE_LOW_MEM, MAX_MEMORY, BOOT_MEM_RAM);
- total += MAX_MEMORY;
+ add_memory_region(reserve_low_mem, max_memory, BOOT_MEM_RAM);
+ total += max_memory;
#else
#ifdef CONFIG_KEXEC
if (crashk_size > 0) {
@@ -992,7 +992,7 @@ void __init plat_mem_setup(void)
*/
cvmx_bootmem_lock();
while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
- && (total < MAX_MEMORY)) {
+ && (total < max_memory)) {
memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
__pa_symbol(&_end), -1,
0x100000,
diff --git a/arch/mips/configs/generic/32r1.config b/arch/mips/configs/generic/32r1.config
new file mode 100644
index 000000000000..a11cd8715519
--- /dev/null
+++ b/arch/mips/configs/generic/32r1.config
@@ -0,0 +1,2 @@
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/32r2.config b/arch/mips/configs/generic/32r2.config
new file mode 100644
index 000000000000..9570672d4f9f
--- /dev/null
+++ b/arch/mips/configs/generic/32r2.config
@@ -0,0 +1,3 @@
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/32r6.config b/arch/mips/configs/generic/32r6.config
new file mode 100644
index 000000000000..ca606e71f4d0
--- /dev/null
+++ b/arch/mips/configs/generic/32r6.config
@@ -0,0 +1,2 @@
+CONFIG_CPU_MIPS32_R6=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/64r1.config b/arch/mips/configs/generic/64r1.config
new file mode 100644
index 000000000000..7c1ea7e7bae3
--- /dev/null
+++ b/arch/mips/configs/generic/64r1.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/64r2.config b/arch/mips/configs/generic/64r2.config
new file mode 100644
index 000000000000..b4d31ae8bfec
--- /dev/null
+++ b/arch/mips/configs/generic/64r2.config
@@ -0,0 +1,5 @@
+CONFIG_CPU_MIPS64_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/64r6.config b/arch/mips/configs/generic/64r6.config
new file mode 100644
index 000000000000..7cac0339c4d5
--- /dev/null
+++ b/arch/mips/configs/generic/64r6.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS64_R6=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/board-sead-3.config b/arch/mips/configs/generic/board-sead-3.config
new file mode 100644
index 000000000000..3b5e1ac579eb
--- /dev/null
+++ b/arch/mips/configs/generic/board-sead-3.config
@@ -0,0 +1,32 @@
+CONFIG_LEGACY_BOARD_SEAD3=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/arch/mips/configs/generic/eb.config b/arch/mips/configs/generic/eb.config
new file mode 100644
index 000000000000..c5cdc99a6530
--- /dev/null
+++ b/arch/mips/configs/generic/eb.config
@@ -0,0 +1 @@
+CONFIG_CPU_BIG_ENDIAN=y
diff --git a/arch/mips/configs/generic/el.config b/arch/mips/configs/generic/el.config
new file mode 100644
index 000000000000..ee43fdb3b8f4
--- /dev/null
+++ b/arch/mips/configs/generic/el.config
@@ -0,0 +1 @@
+CONFIG_CPU_LITTLE_ENDIAN=y
diff --git a/arch/mips/configs/generic/micro32r2.config b/arch/mips/configs/generic/micro32r2.config
new file mode 100644
index 000000000000..b701fe7aaa68
--- /dev/null
+++ b/arch/mips/configs/generic/micro32r2.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MICROMIPS=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
new file mode 100644
index 000000000000..c95d94c7838b
--- /dev/null
+++ b/arch/mips/configs/generic_defconfig
@@ -0,0 +1,96 @@
+CONFIG_MIPS_GENERIC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_MIPS_CPS=y
+CONFIG_CPU_HAS_MSA=y
+CONFIG_HIGHMEM=y
+CONFIG_NR_CPUS=2
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_USERFAULTFD=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_TRIM_UNUSED_KSYMS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_SCSI=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_ENCRYPTION=y
+CONFIG_FANOTIFY=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_OVERLAY_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon"
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set
diff --git a/arch/mips/configs/loongson1c_defconfig b/arch/mips/configs/loongson1c_defconfig
new file mode 100644
index 000000000000..2304d4165773
--- /dev/null
+++ b/arch/mips/configs/loongson1c_defconfig
@@ -0,0 +1,126 @@
+CONFIG_MACH_LOONGSON32=y
+CONFIG_LOONGSON1_LS1C=y
+CONFIG_PREEMPT=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_XZ=y
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_LOONGSON1=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_LOONGSON1=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_HID_GENERIC=m
+CONFIG_USB_HID=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_LOONGSON1=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_ATIME_SUPPORT=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 5afb4840aec7..58d43f3c348d 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -230,7 +230,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m
@@ -318,6 +318,8 @@ CONFIG_LIBERTAS=m
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_CIRRUS=y
diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig
index 98f13879bb8f..c8f7e2835840 100644
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -235,7 +235,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m
@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_CIRRUS=y
diff --git a/arch/mips/configs/malta_kvm_guest_defconfig b/arch/mips/configs/malta_kvm_guest_defconfig
index 3b5d5913f548..d2f54e55356c 100644
--- a/arch/mips/configs/malta_kvm_guest_defconfig
+++ b/arch/mips/configs/malta_kvm_guest_defconfig
@@ -234,7 +234,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m
@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_CIRRUS=y
diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig
index 65f140e1e872..cbf37dd0c490 100644
--- a/arch/mips/configs/malta_qemu_32r6_defconfig
+++ b/arch/mips/configs/malta_qemu_32r6_defconfig
@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig
index 799c4338fd5e..35f6ba260df8 100644
--- a/arch/mips/configs/maltaaprp_defconfig
+++ b/arch/mips/configs/maltaaprp_defconfig
@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
diff --git a/arch/mips/configs/maltasmvp_defconfig b/arch/mips/configs/maltasmvp_defconfig
index ac0eb4daf101..900f14543eeb 100644
--- a/arch/mips/configs/maltasmvp_defconfig
+++ b/arch/mips/configs/maltasmvp_defconfig
@@ -134,6 +134,8 @@ CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig
index 31846000530f..8e2738b5e180 100644
--- a/arch/mips/configs/maltasmvp_eva_defconfig
+++ b/arch/mips/configs/maltasmvp_eva_defconfig
@@ -137,6 +137,8 @@ CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig
index a79107da0675..6dc4e309a691 100644
--- a/arch/mips/configs/maltaup_defconfig
+++ b/arch/mips/configs/maltaup_defconfig
@@ -131,6 +131,8 @@ CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig
index 732215732751..3d0d9cb9673f 100644
--- a/arch/mips/configs/maltaup_xpa_defconfig
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -231,7 +231,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m
@@ -326,6 +326,8 @@ CONFIG_LIBERTAS=m
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_CIRRUS=y
diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig
index 8b7429127a1d..7d32fbbca962 100644
--- a/arch/mips/configs/pistachio_defconfig
+++ b/arch/mips/configs/pistachio_defconfig
@@ -29,7 +29,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
-CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
@@ -264,7 +263,6 @@ CONFIG_DMADEVICES=y
CONFIG_IMG_MDC_DMA=y
CONFIG_STAGING=y
CONFIG_ASHMEM=y
-# CONFIG_ANDROID_TIMED_OUTPUT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_MEMORY=y
CONFIG_IIO=y
diff --git a/arch/mips/configs/sead3_defconfig b/arch/mips/configs/sead3_defconfig
deleted file mode 100644
index dae9354b6256..000000000000
--- a/arch/mips/configs/sead3_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_HZ_100=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/sead3micro_defconfig b/arch/mips/configs/sead3micro_defconfig
deleted file mode 100644
index cd91a775c74e..000000000000
--- a/arch/mips/configs/sead3micro_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MICROMIPS=y
-CONFIG_HZ_100=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
new file mode 100644
index 000000000000..a606b3f9196c
--- /dev/null
+++ b/arch/mips/generic/Kconfig
@@ -0,0 +1,19 @@
+if MIPS_GENERIC
+
+config LEGACY_BOARDS
+ bool
+ help
+ Select this from your board if the board must use a legacy, non-UHI,
+ boot protocol. This will cause the kernel to scan through the list of
+ supported machines calling their detect functions in turn if the
+ kernel is booted without being provided with an FDT via the UHI
+ boot protocol.
+
+config LEGACY_BOARD_SEAD3
+ bool "Support MIPS SEAD-3 boards"
+ select LEGACY_BOARDS
+ help
+ Enable this to include support for booting on MIPS SEAD-3 FPGA-based
+ development boards, which boot using a legacy boot protocol.
+
+endif
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
new file mode 100644
index 000000000000..7c66494151db
--- /dev/null
+++ b/arch/mips/generic/Makefile
@@ -0,0 +1,15 @@
+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+
+obj-y += init.o
+obj-y += irq.o
+obj-y += proc.o
+
+obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform
new file mode 100644
index 000000000000..9a30d69e2281
--- /dev/null
+++ b/arch/mips/generic/Platform
@@ -0,0 +1,14 @@
+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+
+platform-$(CONFIG_MIPS_GENERIC) += generic/
+cflags-$(CONFIG_MIPS_GENERIC) += -I$(srctree)/arch/mips/include/asm/mach-generic
+load-$(CONFIG_MIPS_GENERIC) += 0xffffffff80100000
+all-$(CONFIG_MIPS_GENERIC) := vmlinux.gz.itb
diff --git a/arch/mips/generic/board-sead3.c b/arch/mips/generic/board-sead3.c
new file mode 100644
index 000000000000..f4ae0584a33b
--- /dev/null
+++ b/arch/mips/generic/board-sead3.c
@@ -0,0 +1,376 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "sead3: " fmt
+
+#include <linux/errno.h>
+#include <linux/libfdt.h>
+#include <linux/printk.h>
+
+#include <asm/fw/fw.h>
+#include <asm/io.h>
+#include <asm/machine.h>
+
+#define SEAD_CONFIG CKSEG1ADDR(0x1b100110)
+#define SEAD_CONFIG_GIC_PRESENT BIT(1)
+
+#define MIPS_REVISION CKSEG1ADDR(0x1fc00010)
+#define MIPS_REVISION_MACHINE (0xf << 4)
+#define MIPS_REVISION_MACHINE_SEAD3 (0x4 << 4)
+
+static __init bool sead3_detect(void)
+{
+ uint32_t rev;
+
+ rev = __raw_readl((void *)MIPS_REVISION);
+ return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
+}
+
+static __init int append_cmdline(void *fdt)
+{
+ int err, chosen_off;
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
+ if (err) {
+ pr_err("Unable to set bootargs property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init int append_memory(void *fdt)
+{
+ unsigned long phys_memsize, memsize;
+ __be32 mem_array[2];
+ int err, mem_off;
+ char *var;
+
+ /* find memory size from the bootloader environment */
+ var = fw_getenv("memsize");
+ if (var) {
+ err = kstrtoul(var, 0, &phys_memsize);
+ if (err) {
+ pr_err("Failed to read memsize env variable '%s'\n",
+ var);
+ return -EINVAL;
+ }
+ } else {
+ pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
+ phys_memsize = 32 << 20;
+ }
+
+ /* default to using all available RAM */
+ memsize = phys_memsize;
+
+ /* allow the user to override the usable memory */
+ var = strstr(arcs_cmdline, "memsize=");
+ if (var)
+ memsize = memparse(var + strlen("memsize="), NULL);
+
+ /* if the user says there's more RAM than we thought, believe them */
+ phys_memsize = max_t(unsigned long, phys_memsize, memsize);
+
+ /* find or add a memory node */
+ mem_off = fdt_path_offset(fdt, "/memory");
+ if (mem_off == -FDT_ERR_NOTFOUND)
+ mem_off = fdt_add_subnode(fdt, 0, "memory");
+ if (mem_off < 0) {
+ pr_err("Unable to find or add memory DT node: %d\n", mem_off);
+ return mem_off;
+ }
+
+ err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
+ if (err) {
+ pr_err("Unable to set memory node device_type: %d\n", err);
+ return err;
+ }
+
+ mem_array[0] = 0;
+ mem_array[1] = cpu_to_be32(phys_memsize);
+ err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array));
+ if (err) {
+ pr_err("Unable to set memory regs property: %d\n", err);
+ return err;
+ }
+
+ mem_array[0] = 0;
+ mem_array[1] = cpu_to_be32(memsize);
+ err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
+ mem_array, sizeof(mem_array));
+ if (err) {
+ pr_err("Unable to set linux,usable-memory property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init int remove_gic(void *fdt)
+{
+ const unsigned int cpu_ehci_int = 2;
+ const unsigned int cpu_uart_int = 4;
+ const unsigned int cpu_eth_int = 6;
+ int gic_off, cpu_off, uart_off, eth_off, ehci_off, err;
+ uint32_t cfg, cpu_phandle;
+
+ /* leave the GIC node intact if a GIC is present */
+ cfg = __raw_readl((uint32_t *)SEAD_CONFIG);
+ if (cfg & SEAD_CONFIG_GIC_PRESENT)
+ return 0;
+
+ gic_off = fdt_node_offset_by_compatible(fdt, -1, "mti,gic");
+ if (gic_off < 0) {
+ pr_err("unable to find DT GIC node: %d\n", gic_off);
+ return gic_off;
+ }
+
+ err = fdt_nop_node(fdt, gic_off);
+ if (err) {
+ pr_err("unable to nop GIC node\n");
+ return err;
+ }
+
+ cpu_off = fdt_node_offset_by_compatible(fdt, -1,
+ "mti,cpu-interrupt-controller");
+ if (cpu_off < 0) {
+ pr_err("unable to find CPU intc node: %d\n", cpu_off);
+ return cpu_off;
+ }
+
+ cpu_phandle = fdt_get_phandle(fdt, cpu_off);
+ if (!cpu_phandle) {
+ pr_err("unable to get CPU intc phandle\n");
+ return -EINVAL;
+ }
+
+ err = fdt_setprop_u32(fdt, 0, "interrupt-parent", cpu_phandle);
+ if (err) {
+ pr_err("unable to set root interrupt-parent: %d\n", err);
+ return err;
+ }
+
+ uart_off = fdt_node_offset_by_compatible(fdt, -1, "ns16550a");
+ while (uart_off >= 0) {
+ err = fdt_setprop_u32(fdt, uart_off, "interrupts",
+ cpu_uart_int);
+ if (err) {
+ pr_err("unable to set UART interrupts property: %d\n",
+ err);
+ return err;
+ }
+
+ uart_off = fdt_node_offset_by_compatible(fdt, uart_off,
+ "ns16550a");
+ }
+ if (uart_off != -FDT_ERR_NOTFOUND) {
+ pr_err("error searching for UART DT node: %d\n", uart_off);
+ return uart_off;
+ }
+
+ eth_off = fdt_node_offset_by_compatible(fdt, -1, "smsc,lan9115");
+ if (eth_off < 0) {
+ pr_err("unable to find ethernet DT node: %d\n", eth_off);
+ return eth_off;
+ }
+
+ err = fdt_setprop_u32(fdt, eth_off, "interrupts", cpu_eth_int);
+ if (err) {
+ pr_err("unable to set ethernet interrupts property: %d\n", err);
+ return err;
+ }
+
+ ehci_off = fdt_node_offset_by_compatible(fdt, -1, "generic-ehci");
+ if (ehci_off < 0) {
+ pr_err("unable to find EHCI DT node: %d\n", ehci_off);
+ return ehci_off;
+ }
+
+ err = fdt_setprop_u32(fdt, ehci_off, "interrupts", cpu_ehci_int);
+ if (err) {
+ pr_err("unable to set EHCI interrupts property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init int serial_config(void *fdt)
+{
+ const char *yamontty, *mode_var;
+ char mode_var_name[9], path[18], parity;
+ unsigned int uart, baud, stop_bits;
+ bool hw_flow;
+ int chosen_off, err;
+
+ yamontty = fw_getenv("yamontty");
+ if (!yamontty || !strcmp(yamontty, "tty0")) {
+ uart = 0;
+ } else if (!strcmp(yamontty, "tty1")) {
+ uart = 1;
+ } else {
+ pr_warn("yamontty environment variable '%s' invalid\n",
+ yamontty);
+ uart = 0;
+ }
+
+ baud = stop_bits = 0;
+ parity = 0;
+ hw_flow = false;
+
+ snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
+ mode_var = fw_getenv(mode_var_name);
+ if (mode_var) {
+ while (mode_var[0] >= '0' && mode_var[0] <= '9') {
+ baud *= 10;
+ baud += mode_var[0] - '0';
+ mode_var++;
+ }
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (mode_var[0])
+ parity = mode_var[0];
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (mode_var[0])
+ stop_bits = mode_var[0] - '0';
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (!strcmp(mode_var, "hw"))
+ hw_flow = true;
+ }
+
+ if (!baud)
+ baud = 38400;
+
+ if (parity != 'e' && parity != 'n' && parity != 'o')
+ parity = 'n';
+
+ if (stop_bits != 7 && stop_bits != 8)
+ stop_bits = 8;
+
+ WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s",
+ uart, baud, parity, stop_bits,
+ hw_flow ? "r" : "") >= sizeof(path));
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
+ if (err) {
+ pr_err("Unable to set stdout-path property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init const void *sead3_fixup_fdt(const void *fdt,
+ const void *match_data)
+{
+ static unsigned char fdt_buf[16 << 10] __initdata;
+ int err;
+
+ if (fdt_check_header(fdt))
+ panic("Corrupt DT");
+
+ /* if this isn't SEAD3, something went wrong */
+ BUG_ON(fdt_node_check_compatible(fdt, 0, "mti,sead-3"));
+
+ fw_init_cmdline();
+
+ err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
+ if (err)
+ panic("Unable to open FDT: %d", err);
+
+ err = append_cmdline(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
+ err = append_memory(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
+ err = remove_gic(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
+ err = serial_config(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
+ err = fdt_pack(fdt_buf);
+ if (err)
+ panic("Unable to pack FDT: %d\n", err);
+
+ return fdt_buf;
+}
+
+static __init unsigned int sead3_measure_hpt_freq(void)
+{
+ void __iomem *status_reg = (void __iomem *)0xbf000410;
+ unsigned int freq, orig, tick = 0;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ orig = readl(status_reg) & 0x2; /* get original sample */
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+
+ write_c0_count(0);
+
+ /* wait 1 second (the sampling clock transitions every 10ms) */
+ while (tick < 100) {
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+ tick++;
+ }
+
+ freq = read_c0_count();
+
+ local_irq_restore(flags);
+
+ return freq;
+}
+
+extern char __dtb_sead3_begin[];
+
+MIPS_MACHINE(sead3) = {
+ .fdt = __dtb_sead3_begin,
+ .detect = sead3_detect,
+ .fixup_fdt = sead3_fixup_fdt,
+ .measure_hpt_freq = sead3_measure_hpt_freq,
+};
diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c
new file mode 100644
index 000000000000..0ea73e845440
--- /dev/null
+++ b/arch/mips/generic/init.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/fw/fw.h>
+#include <asm/irq_cpu.h>
+#include <asm/machine.h>
+#include <asm/mips-cpc.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+
+static __initdata const void *fdt;
+static __initdata const struct mips_machine *mach;
+static __initdata const void *mach_match_data;
+
+void __init prom_init(void)
+{
+ const struct mips_machine *check_mach;
+ const struct of_device_id *match;
+
+ if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
+ /*
+ * We booted using the UHI boot protocol, so we have been
+ * provided with the appropriate device tree for the board.
+ * Make use of it & search for any machine struct based upon
+ * the root compatible string.
+ */
+ fdt = (void *)fw_arg1;
+
+ for_each_mips_machine(check_mach) {
+ match = mips_machine_is_compatible(check_mach, fdt);
+ if (match) {
+ mach = check_mach;
+ mach_match_data = match->data;
+ break;
+ }
+ }
+ } else if (IS_ENABLED(CONFIG_LEGACY_BOARDS)) {
+ /*
+ * We weren't booted using the UHI boot protocol, but do
+ * support some number of boards with legacy boot protocols.
+ * Attempt to find the right one.
+ */
+ for_each_mips_machine(check_mach) {
+ if (!check_mach->detect)
+ continue;
+
+ if (!check_mach->detect())
+ continue;
+
+ mach = check_mach;
+ }
+
+ /*
+ * If we don't recognise the machine then we can't continue, so
+ * die here.
+ */
+ BUG_ON(!mach);
+
+ /* Retrieve the machine's FDT */
+ fdt = mach->fdt;
+ }
+
+ BUG_ON(!fdt);
+}
+
+void __init *plat_get_fdt(void)
+{
+ return (void *)fdt;
+}
+
+void __init plat_mem_setup(void)
+{
+ if (mach && mach->fixup_fdt)
+ fdt = mach->fixup_fdt(fdt, mach_match_data);
+
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ __dt_setup_arch((void *)fdt);
+}
+
+void __init device_tree_init(void)
+{
+ int err;
+
+ unflatten_and_copy_device_tree();
+ mips_cpc_probe();
+
+ err = register_cps_smp_ops();
+ if (err)
+ err = register_up_smp_ops();
+}
+
+void __init plat_time_init(void)
+{
+ struct device_node *np;
+ struct clk *clk;
+
+ of_clk_init(NULL);
+
+ if (!cpu_has_counter) {
+ mips_hpt_frequency = 0;
+ } else if (mach && mach->measure_hpt_freq) {
+ mips_hpt_frequency = mach->measure_hpt_freq();
+ } else {
+ np = of_get_cpu_node(0, NULL);
+ if (!np) {
+ pr_err("Failed to get CPU node\n");
+ return;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+
+ mips_hpt_frequency = clk_get_rate(clk);
+ clk_put(clk);
+
+ switch (boot_cpu_type()) {
+ case CPU_20KC:
+ case CPU_25KF:
+ /* The counter runs at the CPU clock rate */
+ break;
+ default:
+ /* The counter runs at half the CPU clock rate */
+ mips_hpt_frequency /= 2;
+ break;
+ }
+ }
+
+ clocksource_probe();
+}
+
+void __init arch_init_irq(void)
+{
+ struct device_node *intc_node;
+
+ intc_node = of_find_compatible_node(NULL, NULL,
+ "mti,cpu-interrupt-controller");
+ if (!cpu_has_veic && !intc_node)
+ mips_cpu_irq_init();
+
+ irqchip_init();
+}
+
+static int __init publish_devices(void)
+{
+ if (!of_have_populated_dt())
+ panic("Device-tree not present");
+
+ if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
+ panic("Failed to populate DT");
+
+ return 0;
+}
+arch_initcall(publish_devices);
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/generic/irq.c b/arch/mips/generic/irq.c
new file mode 100644
index 000000000000..14064bdd91dd
--- /dev/null
+++ b/arch/mips/generic/irq.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+
+int get_c0_fdc_int(void)
+{
+ int mips_cpu_fdc_irq;
+
+ if (cpu_has_veic)
+ panic("Unimplemented!");
+ else if (gic_present)
+ mips_cpu_fdc_irq = gic_get_c0_fdc_int();
+ else if (cp0_fdc_irq >= 0)
+ mips_cpu_fdc_irq = MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
+ else
+ mips_cpu_fdc_irq = -1;
+
+ return mips_cpu_fdc_irq;
+}
+
+int get_c0_perfcount_int(void)
+{
+ int mips_cpu_perf_irq;
+
+ if (cpu_has_veic)
+ panic("Unimplemented!");
+ else if (gic_present)
+ mips_cpu_perf_irq = gic_get_c0_perfcount_int();
+ else if (cp0_perfcount_irq >= 0)
+ mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ else
+ mips_cpu_perf_irq = -1;
+
+ return mips_cpu_perf_irq;
+}
+
+unsigned int get_c0_compare_int(void)
+{
+ int mips_cpu_timer_irq;
+
+ if (cpu_has_veic)
+ panic("Unimplemented!");
+ else if (gic_present)
+ mips_cpu_timer_irq = gic_get_c0_compare_int();
+ else
+ mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+
+ return mips_cpu_timer_irq;
+}
diff --git a/arch/mips/generic/proc.c b/arch/mips/generic/proc.c
new file mode 100644
index 000000000000..42b33250a4a2
--- /dev/null
+++ b/arch/mips/generic/proc.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of.h>
+
+#include <asm/bootinfo.h>
+
+const char *get_system_type(void)
+{
+ const char *str;
+ int err;
+
+ err = of_property_read_string(of_root, "model", &str);
+ if (!err)
+ return str;
+
+ err = of_property_read_string_index(of_root, "compatible", 0, &str);
+ if (!err)
+ return str;
+
+ return "Unknown";
+}
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
new file mode 100644
index 000000000000..f67fbf1c8541
--- /dev/null
+++ b/arch/mips/generic/vmlinux.its.S
@@ -0,0 +1,31 @@
+/dts-v1/;
+
+/ {
+ description = KERNEL_NAME;
+ #address-cells = <ADDR_CELLS>;
+
+ images {
+ kernel@0 {
+ description = KERNEL_NAME;
+ data = /incbin/(VMLINUX_BINARY);
+ type = "kernel";
+ arch = "mips";
+ os = "linux";
+ compression = VMLINUX_COMPRESSION;
+ load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
+ entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf@default";
+
+ conf@default {
+ description = "Generic Linux kernel";
+ kernel = "kernel@0";
+ };
+ };
+};
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index c5b04e752e97..4856adc8906e 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -126,8 +126,7 @@
#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
-#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \
- (_CONST64_(cm) << 59) | (a))
+#define PHYS_TO_XKPHYS(cm, a) (XKPHYS | (_ACAST64_(cm) << 59) | (a))
/*
* The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index d296633d890e..a5eb1bb199a7 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -10,6 +10,102 @@
#include <asm/addrspace.h>
+/*
+ * Sync types defined by the MIPS architecture (document MD00087 table 6.5)
+ * These values are used with the sync instruction to perform memory barriers.
+ * Types of ordering guarantees available through the SYNC instruction:
+ * - Completion Barriers
+ * - Ordering Barriers
+ * As compared to the completion barrier, the ordering barrier is a
+ * lighter-weight operation as it does not require the specified instructions
+ * before the SYNC to be already completed. Instead it only requires that those
+ * specified instructions which are subsequent to the SYNC in the instruction
+ * stream are never re-ordered for processing ahead of the specified
+ * instructions which are before the SYNC in the instruction stream.
+ * This potentially reduces how many cycles the barrier instruction must stall
+ * before it completes.
+ * Implementations that do not use any of the non-zero values of stype to define
+ * different barriers, such as ordering barriers, must make those stype values
+ * act the same as stype zero.
+ */
+
+/*
+ * Completion barriers:
+ * - Every synchronizable specified memory instruction (loads or stores or both)
+ * that occurs in the instruction stream before the SYNC instruction must be
+ * already globally performed before any synchronizable specified memory
+ * instructions that occur after the SYNC are allowed to be performed, with
+ * respect to any other processor or coherent I/O module.
+ *
+ * - The barrier does not guarantee the order in which instruction fetches are
+ * performed.
+ *
+ * - A stype value of zero will always be defined such that it performs the most
+ * complete set of synchronization operations that are defined.This means
+ * stype zero always does a completion barrier that affects both loads and
+ * stores preceding the SYNC instruction and both loads and stores that are
+ * subsequent to the SYNC instruction. Non-zero values of stype may be defined
+ * by the architecture or specific implementations to perform synchronization
+ * behaviors that are less complete than that of stype zero. If an
+ * implementation does not use one of these non-zero values to define a
+ * different synchronization behavior, then that non-zero value of stype must
+ * act the same as stype zero completion barrier. This allows software written
+ * for an implementation with a lighter-weight barrier to work on another
+ * implementation which only implements the stype zero completion barrier.
+ *
+ * - A completion barrier is required, potentially in conjunction with SSNOP (in
+ * Release 1 of the Architecture) or EHB (in Release 2 of the Architecture),
+ * to guarantee that memory reference results are visible across operating
+ * mode changes. For example, a completion barrier is required on some
+ * implementations on entry to and exit from Debug Mode to guarantee that
+ * memory effects are handled correctly.
+ */
+
+/*
+ * stype 0 - A completion barrier that affects preceding loads and stores and
+ * subsequent loads and stores.
+ * Older instructions which must reach the load/store ordering point before the
+ * SYNC instruction completes: Loads, Stores
+ * Younger instructions which must reach the load/store ordering point only
+ * after the SYNC instruction completes: Loads, Stores
+ * Older instructions which must be globally performed when the SYNC instruction
+ * completes: Loads, Stores
+ */
+#define STYPE_SYNC 0x0
+
+/*
+ * Ordering barriers:
+ * - Every synchronizable specified memory instruction (loads or stores or both)
+ * that occurs in the instruction stream before the SYNC instruction must
+ * reach a stage in the load/store datapath after which no instruction
+ * re-ordering is possible before any synchronizable specified memory
+ * instruction which occurs after the SYNC instruction in the instruction
+ * stream reaches the same stage in the load/store datapath.
+ *
+ * - If any memory instruction before the SYNC instruction in program order,
+ * generates a memory request to the external memory and any memory
+ * instruction after the SYNC instruction in program order also generates a
+ * memory request to external memory, the memory request belonging to the
+ * older instruction must be globally performed before the time the memory
+ * request belonging to the younger instruction is globally performed.
+ *
+ * - The barrier does not guarantee the order in which instruction fetches are
+ * performed.
+ */
+
+/*
+ * stype 0x10 - An ordering barrier that affects preceding loads and stores and
+ * subsequent loads and stores.
+ * Older instructions which must reach the load/store ordering point before the
+ * SYNC instruction completes: Loads, Stores
+ * Younger instructions which must reach the load/store ordering point only
+ * after the SYNC instruction completes: Loads, Stores
+ * Older instructions which must be globally performed when the SYNC instruction
+ * completes: N/A
+ */
+#define STYPE_SYNC_MB 0x10
+
+
#ifdef CONFIG_CPU_HAS_SYNC
#define __sync() \
__asm__ __volatile__( \
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index 34ed22ec6c33..4812d1fed0c2 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -28,6 +28,7 @@
* - flush_cache_sigtramp() flush signal trampoline
* - flush_icache_all() flush the entire instruction cache
* - flush_data_cache_page() flushes a page from the data cache
+ * - __flush_icache_user_range(start, end) flushes range of user instructions
*/
/*
@@ -80,6 +81,10 @@ static inline void flush_icache_page(struct vm_area_struct *vma,
extern void (*flush_icache_range)(unsigned long start, unsigned long end);
extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*__flush_icache_user_range)(unsigned long start,
+ unsigned long end);
+extern void (*__local_flush_icache_user_range)(unsigned long start,
+ unsigned long end);
extern void (*__flush_cache_vmap)(void);
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index fbe1881f28fc..bdd6dc18e65c 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -24,7 +24,8 @@ static inline int __pure __get_cpu_type(const int cpu_type)
case CPU_LOONGSON3:
#endif
-#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B
+#if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \
+ defined(CONFIG_SYS_HAS_CPU_LOONGSON1C)
case CPU_LOONGSON1:
#endif
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index f672df8b26d0..9a8372484edc 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -240,6 +240,7 @@
#define PRID_REV_VR4130 0x0080
#define PRID_REV_34K_V1_0_2 0x0022
#define PRID_REV_LOONGSON1B 0x0020
+#define PRID_REV_LOONGSON1C 0x0020 /* Same as Loongson-1B */
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
#define PRID_REV_LOONGSON3A_R1 0x0005
diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h
index c94fafba9e62..21c2082a0dfb 100644
--- a/arch/mips/include/asm/device.h
+++ b/arch/mips/include/asm/device.h
@@ -11,6 +11,11 @@ struct dma_map_ops;
struct dev_archdata {
/* DMA operations on that device */
struct dma_map_ops *dma_ops;
+
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+ /* Non-zero if DMA is coherent with CPU caches */
+ bool dma_coherent;
+#endif
};
struct pdev_archdata {
diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
index bc5e85d579e6..72d0eab02afc 100644
--- a/arch/mips/include/asm/dma-coherence.h
+++ b/arch/mips/include/asm/dma-coherence.h
@@ -9,14 +9,22 @@
#ifndef __ASM_DMA_COHERENCE_H
#define __ASM_DMA_COHERENCE_H
-#ifdef CONFIG_DMA_MAYBE_COHERENT
-extern int coherentio;
+enum coherent_io_user_state {
+ IO_COHERENCE_DEFAULT,
+ IO_COHERENCE_ENABLED,
+ IO_COHERENCE_DISABLED,
+};
+
+#if defined(CONFIG_DMA_PERDEV_COHERENT)
+/* Don't provide (hw_)coherentio to avoid misuse */
+#elif defined(CONFIG_DMA_MAYBE_COHERENT)
+extern enum coherent_io_user_state coherentio;
extern int hw_coherentio;
#else
#ifdef CONFIG_DMA_COHERENT
-#define coherentio 1
+#define coherentio IO_COHERENCE_ENABLED
#else
-#define coherentio 0
+#define coherentio IO_COHERENCE_DISABLED
#endif
#define hw_coherentio 0
#endif /* CONFIG_DMA_MAYBE_COHERENT */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 12fa79e2f1b4..7aa71b9b0258 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -32,4 +32,14 @@ static inline void dma_mark_clean(void *addr, size_t size) {}
extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction);
+#define arch_setup_dma_ops arch_setup_dma_ops
+static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
+ u64 size, const struct iommu_ops *iommu,
+ bool coherent)
+{
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+ dev->archdata.dma_coherent = coherent;
+#endif
+}
+
#endif /* _ASM_DMA_MAPPING_H */
diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h
index a7fbcd6ed13c..32229c77906a 100644
--- a/arch/mips/include/asm/i8259.h
+++ b/arch/mips/include/asm/i8259.h
@@ -37,12 +37,22 @@
extern raw_spinlock_t i8259A_lock;
-extern int i8259A_irq_pending(unsigned int irq);
extern void make_8259A_irq(unsigned int irq);
extern void init_i8259_irqs(void);
extern int i8259_of_init(struct device_node *node, struct device_node *parent);
+/**
+ * i8159_set_poll() - Override the i8259 polling function
+ * @poll: pointer to platform-specific polling function
+ *
+ * Call this to override the generic i8259 polling function, which directly
+ * accesses i8259 registers, with a platform specific one which may be faster
+ * in cases where hardware provides a more optimal means of polling for an
+ * interrupt.
+ */
+extern void i8259_set_poll(int (*poll)(void));
+
/*
* Do the traditional i8259 interrupt polling thing. This is for the few
* cases where no better interrupt acknowledge method is available and we
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index 0f8a354fd468..61addb1677e9 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -49,7 +49,19 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
static inline int plat_device_is_coherent(struct device *dev)
{
- return coherentio;
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+ return dev->archdata.dma_coherent;
+#else
+ switch (coherentio) {
+ default:
+ case IO_COHERENCE_DEFAULT:
+ return hw_coherentio;
+ case IO_COHERENCE_ENABLED:
+ return 1;
+ case IO_COHERENCE_DISABLED:
+ return 0;
+ }
+#endif
}
#ifndef plat_post_dma_flush
diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h
index e2561d99a3fe..9ec2f6a5200b 100644
--- a/arch/mips/include/asm/mach-generic/floppy.h
+++ b/arch/mips/include/asm/mach-generic/floppy.h
@@ -115,11 +115,7 @@ static inline unsigned long fd_getfdaddr1(void)
static inline unsigned long fd_dma_mem_alloc(unsigned long size)
{
- unsigned long mem;
-
- mem = __get_dma_pages(GFP_KERNEL, get_order(size));
-
- return mem;
+ return __get_dma_pages(GFP_KERNEL, get_order(size));
}
static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index afc96ecb9004..952b0fdfda0e 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -12,6 +12,8 @@
#include <linux/const.h>
+#include <asm/mipsregs.h>
+
/*
* This gives the physical RAM offset.
*/
@@ -52,11 +54,7 @@
#ifdef CONFIG_64BIT
#ifndef CAC_BASE
-#ifdef CONFIG_DMA_NONCOHERENT
-#define CAC_BASE _AC(0x9800000000000000, UL)
-#else
-#define CAC_BASE _AC(0xa800000000000000, UL)
-#endif
+#define CAC_BASE PHYS_TO_XKPHYS(read_c0_config() & CONF_CM_CMASK, 0)
#endif
#ifndef IO_BASE
diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h
index b18802a0b17e..4775a1136a5b 100644
--- a/arch/mips/include/asm/mach-ip27/spaces.h
+++ b/arch/mips/include/asm/mach-ip27/spaces.h
@@ -19,6 +19,7 @@
#define IO_BASE 0x9200000000000000
#define MSPEC_BASE 0x9400000000000000
#define UNCAC_BASE 0x9600000000000000
+#define CAC_BASE 0xa800000000000000
#define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK))
#define TO_HSPEC(x) (HSPEC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/arch/mips/include/asm/mach-loongson32/irq.h b/arch/mips/include/asm/mach-loongson32/irq.h
index c1c744197de4..8c01b304b7ec 100644
--- a/arch/mips/include/asm/mach-loongson32/irq.h
+++ b/arch/mips/include/asm/mach-loongson32/irq.h
@@ -36,9 +36,14 @@
#define LS1X_IRQ(n, x) (LS1X_IRQ_BASE + (n << 5) + (x))
#define LS1X_UART0_IRQ LS1X_IRQ(0, 2)
+#if defined(CONFIG_LOONGSON1_LS1B)
#define LS1X_UART1_IRQ LS1X_IRQ(0, 3)
#define LS1X_UART2_IRQ LS1X_IRQ(0, 4)
#define LS1X_UART3_IRQ LS1X_IRQ(0, 5)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_UART1_IRQ LS1X_IRQ(0, 4)
+#define LS1X_UART2_IRQ LS1X_IRQ(0, 5)
+#endif
#define LS1X_CAN0_IRQ LS1X_IRQ(0, 6)
#define LS1X_CAN1_IRQ LS1X_IRQ(0, 7)
#define LS1X_SPI0_IRQ LS1X_IRQ(0, 8)
@@ -47,6 +52,9 @@
#define LS1X_DMA0_IRQ LS1X_IRQ(0, 13)
#define LS1X_DMA1_IRQ LS1X_IRQ(0, 14)
#define LS1X_DMA2_IRQ LS1X_IRQ(0, 15)
+#if defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_NAND_IRQ LS1X_IRQ(0, 16)
+#endif
#define LS1X_PWM0_IRQ LS1X_IRQ(0, 17)
#define LS1X_PWM1_IRQ LS1X_IRQ(0, 18)
#define LS1X_PWM2_IRQ LS1X_IRQ(0, 19)
@@ -54,18 +62,49 @@
#define LS1X_RTC_INT0_IRQ LS1X_IRQ(0, 21)
#define LS1X_RTC_INT1_IRQ LS1X_IRQ(0, 22)
#define LS1X_RTC_INT2_IRQ LS1X_IRQ(0, 23)
+#if defined(CONFIG_LOONGSON1_LS1B)
#define LS1X_TOY_INT0_IRQ LS1X_IRQ(0, 24)
#define LS1X_TOY_INT1_IRQ LS1X_IRQ(0, 25)
#define LS1X_TOY_INT2_IRQ LS1X_IRQ(0, 26)
#define LS1X_RTC_TICK_IRQ LS1X_IRQ(0, 27)
#define LS1X_TOY_TICK_IRQ LS1X_IRQ(0, 28)
+#define LS1X_UART4_IRQ LS1X_IRQ(0, 29)
+#define LS1X_UART5_IRQ LS1X_IRQ(0, 30)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_UART3_IRQ LS1X_IRQ(0, 29)
+#define LS1X_ADC_IRQ LS1X_IRQ(0, 30)
+#define LS1X_SDIO_IRQ LS1X_IRQ(0, 31)
+#endif
#define LS1X_EHCI_IRQ LS1X_IRQ(1, 0)
#define LS1X_OHCI_IRQ LS1X_IRQ(1, 1)
+#if defined(CONFIG_LOONGSON1_LS1B)
#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 2)
#define LS1X_GMAC1_IRQ LS1X_IRQ(1, 3)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_OTG_IRQ LS1X_IRQ(1, 2)
+#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 3)
+#define LS1X_CAM_IRQ LS1X_IRQ(1, 4)
+#define LS1X_UART4_IRQ LS1X_IRQ(1, 5)
+#define LS1X_UART5_IRQ LS1X_IRQ(1, 6)
+#define LS1X_UART6_IRQ LS1X_IRQ(1, 7)
+#define LS1X_UART7_IRQ LS1X_IRQ(1, 8)
+#define LS1X_UART8_IRQ LS1X_IRQ(1, 9)
+#define LS1X_UART9_IRQ LS1X_IRQ(1, 13)
+#define LS1X_UART10_IRQ LS1X_IRQ(1, 14)
+#define LS1X_UART11_IRQ LS1X_IRQ(1, 15)
+#define LS1X_I2C0_IRQ LS1X_IRQ(1, 17)
+#define LS1X_I2C1_IRQ LS1X_IRQ(1, 18)
+#define LS1X_I2C2_IRQ LS1X_IRQ(1, 19)
+#endif
-#define LS1X_IRQS (LS1X_IRQ(4, 31) + 1 - LS1X_IRQ_BASE)
+#if defined(CONFIG_LOONGSON1_LS1B)
+#define INTN 4
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define INTN 5
+#endif
+
+#define LS1X_IRQS (LS1X_IRQ(INTN, 31) + 1 - LS1X_IRQ_BASE)
#define NR_IRQS (MIPS_CPU_IRQS + LS1X_IRQS)
diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
index 978f6df8970a..3584c40caf79 100644
--- a/arch/mips/include/asm/mach-loongson32/loongson1.h
+++ b/arch/mips/include/asm/mach-loongson32/loongson1.h
@@ -12,7 +12,11 @@
#ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
#define __ASM_MACH_LOONGSON32_LOONGSON1_H
+#if defined(CONFIG_LOONGSON1_LS1B)
#define DEFAULT_MEMSIZE 256 /* If no memsize provided */
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define DEFAULT_MEMSIZE 32
+#endif
/* Loongson 1 Register Bases */
#define LS1X_MUX_BASE 0x1fd00420
@@ -20,6 +24,7 @@
#define LS1X_GPIO0_BASE 0x1fd010c0
#define LS1X_GPIO1_BASE 0x1fd010c4
#define LS1X_DMAC_BASE 0x1fd01160
+#define LS1X_CBUS_BASE 0x1fd011c0
#define LS1X_EHCI_BASE 0x1fe00000
#define LS1X_OHCI_BASE 0x1fe08000
#define LS1X_GMAC0_BASE 0x1fe10000
diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h
index 672531aa9bef..7adc31364939 100644
--- a/arch/mips/include/asm/mach-loongson32/platform.h
+++ b/arch/mips/include/asm/mach-loongson32/platform.h
@@ -30,5 +30,6 @@ void __init ls1x_clk_init(void);
void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata);
void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata);
void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
+void __init ls1x_rtc_set_extclk(struct platform_device *pdev);
#endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson32/regs-clk.h b/arch/mips/include/asm/mach-loongson32/regs-clk.h
index 4d56fc38f0c4..e5e8f118f34b 100644
--- a/arch/mips/include/asm/mach-loongson32/regs-clk.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-clk.h
@@ -18,6 +18,7 @@
#define LS1X_CLK_PLL_FREQ LS1X_CLK_REG(0x0)
#define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4)
+#if defined(CONFIG_LOONGSON1_LS1B)
/* Clock PLL Divisor Register Bits */
#define DIV_DC_EN BIT(31)
#define DIV_DC_RST BIT(30)
@@ -48,4 +49,37 @@
#define BYPASS_DDR_WIDTH 1
#define BYPASS_CPU_WIDTH 1
+#elif defined(CONFIG_LOONGSON1_LS1C)
+/* PLL/SDRAM Frequency configuration register Bits */
+#define PLL_VALID BIT(31)
+#define FRAC_N GENMASK(23, 16)
+#define RST_TIME GENMASK(3, 2)
+#define SDRAM_DIV GENMASK(1, 0)
+
+/* CPU/CAMERA/DC Frequency configuration register Bits */
+#define DIV_DC_EN BIT(31)
+#define DIV_DC GENMASK(30, 24)
+#define DIV_CAM_EN BIT(23)
+#define DIV_CAM GENMASK(22, 16)
+#define DIV_CPU_EN BIT(15)
+#define DIV_CPU GENMASK(14, 8)
+#define DIV_DC_SEL_EN BIT(5)
+#define DIV_DC_SEL BIT(4)
+#define DIV_CAM_SEL_EN BIT(3)
+#define DIV_CAM_SEL BIT(2)
+#define DIV_CPU_SEL_EN BIT(1)
+#define DIV_CPU_SEL BIT(0)
+
+#define DIV_DC_SHIFT 24
+#define DIV_CAM_SHIFT 16
+#define DIV_CPU_SHIFT 8
+#define DIV_DDR_SHIFT 0
+
+#define DIV_DC_WIDTH 7
+#define DIV_CAM_WIDTH 7
+#define DIV_CPU_WIDTH 7
+#define DIV_DDR_WIDTH 2
+
+#endif
+
#endif /* __ASM_MACH_LOONGSON32_REGS_CLK_H */
diff --git a/arch/mips/include/asm/mach-loongson32/regs-mux.h b/arch/mips/include/asm/mach-loongson32/regs-mux.h
index 7c394f93cb9e..4a0bdeb0eb9b 100644
--- a/arch/mips/include/asm/mach-loongson32/regs-mux.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-mux.h
@@ -18,6 +18,7 @@
#define LS1X_MUX_CTRL0 LS1X_MUX_REG(0x0)
#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
+#if defined(CONFIG_LOONGSON1_LS1B)
/* MUX CTRL0 Register Bits */
#define UART0_USE_PWM23 BIT(28)
#define UART0_USE_PWM01 BIT(27)
@@ -64,4 +65,64 @@
#define GMAC1_USE_PWM23 BIT(1)
#define GMAC0_USE_PWM01 BIT(0)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+
+/* SHUT_CTRL Register Bits */
+#define UART_SPLIT GENMASK(31, 30)
+#define OUTPUT_CLK GENMASK(29, 26)
+#define ADC_SHUT BIT(25)
+#define SDIO_SHUT BIT(24)
+#define DMA2_SHUT BIT(23)
+#define DMA1_SHUT BIT(22)
+#define DMA0_SHUT BIT(21)
+#define SPI1_SHUT BIT(20)
+#define SPI0_SHUT BIT(19)
+#define I2C2_SHUT BIT(18)
+#define I2C1_SHUT BIT(17)
+#define I2C0_SHUT BIT(16)
+#define AC97_SHUT BIT(15)
+#define I2S_SHUT BIT(14)
+#define UART3_SHUT BIT(13)
+#define UART2_SHUT BIT(12)
+#define UART1_SHUT BIT(11)
+#define UART0_SHUT BIT(10)
+#define CAN1_SHUT BIT(9)
+#define CAN0_SHUT BIT(8)
+#define ECC_SHUT BIT(7)
+#define GMAC_SHUT BIT(6)
+#define USBHOST_SHUT BIT(5)
+#define USBOTG_SHUT BIT(4)
+#define SDRAM_SHUT BIT(3)
+#define SRAM_SHUT BIT(2)
+#define CAM_SHUT BIT(1)
+#define LCD_SHUT BIT(0)
+
+#define UART_SPLIT_SHIFT 30
+#define OUTPUT_CLK_SHIFT 26
+
+/* MISC_CTRL Register Bits */
+#define USBHOST_RSTN BIT(31)
+#define PHY_INTF_SELI GENMASK(30, 28)
+#define AC97_EN BIT(25)
+#define SDIO_DMA_EN GENMASK(24, 23)
+#define ADC_DMA_EN BIT(22)
+#define SDIO_USE_SPI1 BIT(17)
+#define SDIO_USE_SPI0 BIT(16)
+#define SRAM_CTRL GENMASK(15, 0)
+
+#define PHY_INTF_SELI_SHIFT 28
+#define SDIO_DMA_EN_SHIFT 23
+#define SRAM_CTRL_SHIFT 0
+
+#define LS1X_CBUS_REG(n, x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_CBUS_BASE + (n * 0x04) + (x)))
+
+#define LS1X_CBUS_FIRST(n) LS1X_CBUS_REG(n, 0x00)
+#define LS1X_CBUS_SECOND(n) LS1X_CBUS_REG(n, 0x10)
+#define LS1X_CBUS_THIRD(n) LS1X_CBUS_REG(n, 0x20)
+#define LS1X_CBUS_FOURTHT(n) LS1X_CBUS_REG(n, 0x30)
+#define LS1X_CBUS_FIFTHT(n) LS1X_CBUS_REG(n, 0x40)
+
+#endif
+
#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
deleted file mode 100644
index bfbd7035d4c5..000000000000
--- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2004 Chris Dearman
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
-
-
-/*
- * CPU feature overrides for MIPS boards
- */
-#ifdef CONFIG_CPU_MIPS32
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_4k_cache 1
-/* #define cpu_has_fpu ? */
-/* #define cpu_has_32fpr ? */
-#define cpu_has_counter 1
-/* #define cpu_has_watch ? */
-#define cpu_has_divec 1
-#define cpu_has_vce 0
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-/* #define cpu_has_prefetch ? */
-#define cpu_has_mcheck 1
-/* #define cpu_has_ejtag ? */
-#ifdef CONFIG_CPU_MICROMIPS
-#define cpu_has_llsc 0
-#else
-#define cpu_has_llsc 1
-#endif
-/* #define cpu_has_vtag_icache ? */
-/* #define cpu_has_dc_aliases ? */
-/* #define cpu_has_ic_fills_f_dc ? */
-#define cpu_has_nofpuex 0
-/* #define cpu_has_64bits ? */
-/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_inclusive_pcaches ? */
-#define cpu_icache_snoops_remote_store 1
-#endif
-
-#ifdef CONFIG_CPU_MIPS64
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_4k_cache 1
-/* #define cpu_has_fpu ? */
-/* #define cpu_has_32fpr ? */
-#define cpu_has_counter 1
-/* #define cpu_has_watch ? */
-#define cpu_has_divec 1
-#define cpu_has_vce 0
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-/* #define cpu_has_prefetch ? */
-#define cpu_has_mcheck 1
-/* #define cpu_has_ejtag ? */
-#define cpu_has_llsc 1
-/* #define cpu_has_vtag_icache ? */
-/* #define cpu_has_dc_aliases ? */
-/* #define cpu_has_ic_fills_f_dc ? */
-#define cpu_has_nofpuex 0
-/* #define cpu_has_64bits ? */
-/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_inclusive_pcaches ? */
-#define cpu_icache_snoops_remote_store 1
-#endif
-
-#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-sead3/irq.h b/arch/mips/include/asm/mach-sead3/irq.h
deleted file mode 100644
index 5d154cfbcf4c..000000000000
--- a/arch/mips/include/asm/mach-sead3/irq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_MACH_MIPS_IRQ_H
-#define __ASM_MACH_MIPS_IRQ_H
-
-#define NR_IRQS 256
-
-
-#include_next <irq.h>
-
-#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h b/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
deleted file mode 100644
index 6cccd4d558d7..000000000000
--- a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Chris Dearman (chris@mips.com)
- * Copyright (C) 2007 Mips Technologies, Inc.
- */
-#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
-#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
-
- .macro kernel_entry_setup
- .endm
-
-/*
- * Do SMP slave processor setup necessary before we can safely execute C code.
- */
- .macro smp_slave_setup
- .endm
-
-#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-sead3/war.h b/arch/mips/include/asm/mach-sead3/war.h
deleted file mode 100644
index d068fc411f47..000000000000
--- a/arch/mips/include/asm/mach-sead3/war.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
-#define __ASM_MIPS_MACH_MIPS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 1
-#define MIPS_CACHE_SYNC_WAR 1
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 1
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/machine.h b/arch/mips/include/asm/machine.h
new file mode 100644
index 000000000000..6b444cd9526f
--- /dev/null
+++ b/arch/mips/include/asm/machine.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_MACHINE_H__
+#define __MIPS_ASM_MACHINE_H__
+
+#include <linux/libfdt.h>
+#include <linux/of.h>
+
+struct mips_machine {
+ const struct of_device_id *matches;
+ const void *fdt;
+ bool (*detect)(void);
+ const void *(*fixup_fdt)(const void *fdt, const void *match_data);
+ unsigned int (*measure_hpt_freq)(void);
+};
+
+extern long __mips_machines_start;
+extern long __mips_machines_end;
+
+#define MIPS_MACHINE(name) \
+ static const struct mips_machine __mips_mach_##name \
+ __used __section(.mips.machines.init)
+
+#define for_each_mips_machine(mach) \
+ for ((mach) = (struct mips_machine *)&__mips_machines_start; \
+ (mach) < (struct mips_machine *)&__mips_machines_end; \
+ (mach)++)
+
+/**
+ * mips_machine_is_compatible() - check if a machine is compatible with an FDT
+ * @mach: the machine struct to check
+ * @fdt: the FDT to check for compatibility with
+ *
+ * Check whether the given machine @mach is compatible with the given flattened
+ * device tree @fdt, based upon the compatibility property of the root node.
+ *
+ * Return: the device id matched if any, else NULL
+ */
+static inline const struct of_device_id *
+mips_machine_is_compatible(const struct mips_machine *mach, const void *fdt)
+{
+ const struct of_device_id *match;
+
+ if (!mach->matches)
+ return NULL;
+
+ for (match = mach->matches; match->compatible; match++) {
+ if (fdt_node_check_compatible(fdt, 0, match->compatible) == 0)
+ return match;
+ }
+
+ return NULL;
+}
+
+#endif /* __MIPS_ASM_MACHINE_H__ */
diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h
deleted file mode 100644
index 8932c7de0419..000000000000
--- a/arch/mips/include/asm/mips-boards/sead3int.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000,2012 MIPS Technologies, Inc. All rights reserved.
- * Douglas Leung <douglas@mips.com>
- * Steven J. Hill <sjhill@mips.com>
- */
-#ifndef _MIPS_SEAD3INT_H
-#define _MIPS_SEAD3INT_H
-
-#include <linux/irqchip/mips-gic.h>
-
-/* SEAD-3 GIC address space definitions. */
-#define GIC_BASE_ADDR 0x1b1c0000
-#define GIC_ADDRSPACE_SZ (128 * 1024)
-
-/* CPU interrupt offsets */
-#define CPU_INT_GIC 2
-#define CPU_INT_EHCI 2
-#define CPU_INT_UART0 4
-#define CPU_INT_UART1 4
-#define CPU_INT_NET 6
-
-/* GIC interrupt offsets */
-#define GIC_INT_NET GIC_SHARED_TO_HWIRQ(0)
-#define GIC_INT_UART1 GIC_SHARED_TO_HWIRQ(2)
-#define GIC_INT_UART0 GIC_SHARED_TO_HWIRQ(3)
-#define GIC_INT_EHCI GIC_SHARED_TO_HWIRQ(5)
-
-#endif /* !(_MIPS_SEAD3INT_H) */
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 4fafeefe65c2..2e4180797b21 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -359,6 +359,7 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
/* GCR_Cx_COHERENCE register fields */
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0)
+#define CM3_GCR_Cx_COHERENCE_COHEN_MSK (_ULCAST_(0x1) << 0)
/* GCR_Cx_CONFIG register fields */
#define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF 10
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-board.h b/arch/mips/include/asm/octeon/cvmx-helper-board.h
index cda93aee712c..b4d19c21b62c 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-board.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h
@@ -58,16 +58,6 @@ typedef enum {
#define CVMX_HELPER_BOARD_MGMT_IPD_PORT -10
/**
- * cvmx_override_board_link_get(int ipd_port) is a function
- * pointer. It is meant to allow customization of the process of
- * talking to a PHY to determine link speed. It is called every
- * time a PHY must be polled for link status. Users should set
- * this pointer to a function before calling any cvmx-helper
- * operations.
- */
-extern cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port);
-
-/**
* Return the MII PHY address associated with the given IPD
* port. A result of -1 means there isn't a MII capable PHY
* connected to this port. On chips supporting multiple MII
@@ -86,26 +76,6 @@ extern cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port);
extern int cvmx_helper_board_get_mii_address(int ipd_port);
/**
- * This function as a board specific method of changing the PHY
- * speed, duplex, and autonegotiation. This programs the PHY and
- * not Octeon. This can be used to force Octeon's links to
- * specific settings.
- *
- * @phy_addr: The address of the PHY to program
- * @link_flags:
- * Flags to control autonegotiation. Bit 0 is autonegotiation
- * enable/disable to maintain backward compatibility.
- * @link_info: Link speed to program. If the speed is zero and autonegotiation
- * is enabled, all possible negotiation speeds are advertised.
- *
- * Returns Zero on success, negative on failure
- */
-int cvmx_helper_board_link_set_phy(int phy_addr,
- cvmx_helper_board_set_phy_link_flags_types_t
- link_flags,
- cvmx_helper_link_info_t link_info);
-
-/**
* This function is the board specific method of determining an
* ethernet ports link speed. Most Octeon boards have Marvell PHYs
* and are handled by the fall through case. This function must be
diff --git a/arch/mips/include/asm/octeon/cvmx-mdio.h b/arch/mips/include/asm/octeon/cvmx-mdio.h
deleted file mode 100644
index 9f6a4f32a83c..000000000000
--- a/arch/mips/include/asm/octeon/cvmx-mdio.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/***********************license start***************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
- ***********************license end**************************************/
-
-/*
- *
- * Interface to the SMI/MDIO hardware, including support for both IEEE 802.3
- * clause 22 and clause 45 operations.
- *
- */
-
-#ifndef __CVMX_MIO_H__
-#define __CVMX_MIO_H__
-
-#include <asm/octeon/cvmx-smix-defs.h>
-
-/**
- * PHY register 0 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_CONTROL 0
-typedef union {
- uint16_t u16;
- struct {
- uint16_t reset:1;
- uint16_t loopback:1;
- uint16_t speed_lsb:1;
- uint16_t autoneg_enable:1;
- uint16_t power_down:1;
- uint16_t isolate:1;
- uint16_t restart_autoneg:1;
- uint16_t duplex:1;
- uint16_t collision_test:1;
- uint16_t speed_msb:1;
- uint16_t unidirectional_enable:1;
- uint16_t reserved_0_4:5;
- } s;
-} cvmx_mdio_phy_reg_control_t;
-
-/**
- * PHY register 1 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_STATUS 1
-typedef union {
- uint16_t u16;
- struct {
- uint16_t capable_100base_t4:1;
- uint16_t capable_100base_x_full:1;
- uint16_t capable_100base_x_half:1;
- uint16_t capable_10_full:1;
- uint16_t capable_10_half:1;
- uint16_t capable_100base_t2_full:1;
- uint16_t capable_100base_t2_half:1;
- uint16_t capable_extended_status:1;
- uint16_t capable_unidirectional:1;
- uint16_t capable_mf_preamble_suppression:1;
- uint16_t autoneg_complete:1;
- uint16_t remote_fault:1;
- uint16_t capable_autoneg:1;
- uint16_t link_status:1;
- uint16_t jabber_detect:1;
- uint16_t capable_extended_registers:1;
-
- } s;
-} cvmx_mdio_phy_reg_status_t;
-
-/**
- * PHY register 2 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_ID1 2
-typedef union {
- uint16_t u16;
- struct {
- uint16_t oui_bits_3_18;
- } s;
-} cvmx_mdio_phy_reg_id1_t;
-
-/**
- * PHY register 3 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_ID2 3
-typedef union {
- uint16_t u16;
- struct {
- uint16_t oui_bits_19_24:6;
- uint16_t model:6;
- uint16_t revision:4;
- } s;
-} cvmx_mdio_phy_reg_id2_t;
-
-/**
- * PHY register 4 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_AUTONEG_ADVER 4
-typedef union {
- uint16_t u16;
- struct {
- uint16_t next_page:1;
- uint16_t reserved_14:1;
- uint16_t remote_fault:1;
- uint16_t reserved_12:1;
- uint16_t asymmetric_pause:1;
- uint16_t pause:1;
- uint16_t advert_100base_t4:1;
- uint16_t advert_100base_tx_full:1;
- uint16_t advert_100base_tx_half:1;
- uint16_t advert_10base_tx_full:1;
- uint16_t advert_10base_tx_half:1;
- uint16_t selector:5;
- } s;
-} cvmx_mdio_phy_reg_autoneg_adver_t;
-
-/**
- * PHY register 5 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_LINK_PARTNER_ABILITY 5
-typedef union {
- uint16_t u16;
- struct {
- uint16_t next_page:1;
- uint16_t ack:1;
- uint16_t remote_fault:1;
- uint16_t reserved_12:1;
- uint16_t asymmetric_pause:1;
- uint16_t pause:1;
- uint16_t advert_100base_t4:1;
- uint16_t advert_100base_tx_full:1;
- uint16_t advert_100base_tx_half:1;
- uint16_t advert_10base_tx_full:1;
- uint16_t advert_10base_tx_half:1;
- uint16_t selector:5;
- } s;
-} cvmx_mdio_phy_reg_link_partner_ability_t;
-
-/**
- * PHY register 6 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_AUTONEG_EXPANSION 6
-typedef union {
- uint16_t u16;
- struct {
- uint16_t reserved_5_15:11;
- uint16_t parallel_detection_fault:1;
- uint16_t link_partner_next_page_capable:1;
- uint16_t local_next_page_capable:1;
- uint16_t page_received:1;
- uint16_t link_partner_autoneg_capable:1;
-
- } s;
-} cvmx_mdio_phy_reg_autoneg_expansion_t;
-
-/**
- * PHY register 9 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_CONTROL_1000 9
-typedef union {
- uint16_t u16;
- struct {
- uint16_t test_mode:3;
- uint16_t manual_master_slave:1;
- uint16_t master:1;
- uint16_t port_type:1;
- uint16_t advert_1000base_t_full:1;
- uint16_t advert_1000base_t_half:1;
- uint16_t reserved_0_7:8;
- } s;
-} cvmx_mdio_phy_reg_control_1000_t;
-
-/**
- * PHY register 10 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_STATUS_1000 10
-typedef union {
- uint16_t u16;
- struct {
- uint16_t master_slave_fault:1;
- uint16_t is_master:1;
- uint16_t local_receiver_ok:1;
- uint16_t remote_receiver_ok:1;
- uint16_t remote_capable_1000base_t_full:1;
- uint16_t remote_capable_1000base_t_half:1;
- uint16_t reserved_8_9:2;
- uint16_t idle_error_count:8;
- } s;
-} cvmx_mdio_phy_reg_status_1000_t;
-
-/**
- * PHY register 15 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_EXTENDED_STATUS 15
-typedef union {
- uint16_t u16;
- struct {
- uint16_t capable_1000base_x_full:1;
- uint16_t capable_1000base_x_half:1;
- uint16_t capable_1000base_t_full:1;
- uint16_t capable_1000base_t_half:1;
- uint16_t reserved_0_11:12;
- } s;
-} cvmx_mdio_phy_reg_extended_status_t;
-
-/**
- * PHY register 13 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_MMD_CONTROL 13
-typedef union {
- uint16_t u16;
- struct {
- uint16_t function:2;
- uint16_t reserved_5_13:9;
- uint16_t devad:5;
- } s;
-} cvmx_mdio_phy_reg_mmd_control_t;
-
-/**
- * PHY register 14 from the 802.3 spec
- */
-#define CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA 14
-typedef union {
- uint16_t u16;
- struct {
- uint16_t address_data:16;
- } s;
-} cvmx_mdio_phy_reg_mmd_address_data_t;
-
-/* Operating request encodings. */
-#define MDIO_CLAUSE_22_WRITE 0
-#define MDIO_CLAUSE_22_READ 1
-
-#define MDIO_CLAUSE_45_ADDRESS 0
-#define MDIO_CLAUSE_45_WRITE 1
-#define MDIO_CLAUSE_45_READ_INC 2
-#define MDIO_CLAUSE_45_READ 3
-
-/* MMD identifiers, mostly for accessing devices within XENPAK modules. */
-#define CVMX_MMD_DEVICE_PMA_PMD 1
-#define CVMX_MMD_DEVICE_WIS 2
-#define CVMX_MMD_DEVICE_PCS 3
-#define CVMX_MMD_DEVICE_PHY_XS 4
-#define CVMX_MMD_DEVICE_DTS_XS 5
-#define CVMX_MMD_DEVICE_TC 6
-#define CVMX_MMD_DEVICE_CL22_EXT 29
-#define CVMX_MMD_DEVICE_VENDOR_1 30
-#define CVMX_MMD_DEVICE_VENDOR_2 31
-
-/* Helper function to put MDIO interface into clause 45 mode */
-static inline void __cvmx_mdio_set_clause45_mode(int bus_id)
-{
- union cvmx_smix_clk smi_clk;
- /* Put bus into clause 45 mode */
- smi_clk.u64 = cvmx_read_csr(CVMX_SMIX_CLK(bus_id));
- smi_clk.s.mode = 1;
- smi_clk.s.preamble = 1;
- cvmx_write_csr(CVMX_SMIX_CLK(bus_id), smi_clk.u64);
-}
-
-/* Helper function to put MDIO interface into clause 22 mode */
-static inline void __cvmx_mdio_set_clause22_mode(int bus_id)
-{
- union cvmx_smix_clk smi_clk;
- /* Put bus into clause 22 mode */
- smi_clk.u64 = cvmx_read_csr(CVMX_SMIX_CLK(bus_id));
- smi_clk.s.mode = 0;
- cvmx_write_csr(CVMX_SMIX_CLK(bus_id), smi_clk.u64);
-}
-
-/**
- * Perform an MII read. This function is used to read PHY
- * registers controlling auto negotiation.
- *
- * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- * support multiple busses.
- * @phy_id: The MII phy id
- * @location: Register location to read
- *
- * Returns Result from the read or -1 on failure
- */
-static inline int cvmx_mdio_read(int bus_id, int phy_id, int location)
-{
- union cvmx_smix_cmd smi_cmd;
- union cvmx_smix_rd_dat smi_rd;
- int timeout = 1000;
-
- if (octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
- __cvmx_mdio_set_clause22_mode(bus_id);
-
- smi_cmd.u64 = 0;
- smi_cmd.s.phy_op = MDIO_CLAUSE_22_READ;
- smi_cmd.s.phy_adr = phy_id;
- smi_cmd.s.reg_adr = location;
- cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
- do {
- cvmx_wait(1000);
- smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
- } while (smi_rd.s.pending && timeout--);
-
- if (smi_rd.s.val)
- return smi_rd.s.dat;
- else
- return -1;
-}
-
-/**
- * Perform an MII write. This function is used to write PHY
- * registers controlling auto negotiation.
- *
- * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- * support multiple busses.
- * @phy_id: The MII phy id
- * @location: Register location to write
- * @val: Value to write
- *
- * Returns -1 on error
- * 0 on success
- */
-static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val)
-{
- union cvmx_smix_cmd smi_cmd;
- union cvmx_smix_wr_dat smi_wr;
- int timeout = 1000;
-
- if (octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
- __cvmx_mdio_set_clause22_mode(bus_id);
-
- smi_wr.u64 = 0;
- smi_wr.s.dat = val;
- cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
-
- smi_cmd.u64 = 0;
- smi_cmd.s.phy_op = MDIO_CLAUSE_22_WRITE;
- smi_cmd.s.phy_adr = phy_id;
- smi_cmd.s.reg_adr = location;
- cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
- do {
- cvmx_wait(1000);
- smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
- } while (smi_wr.s.pending && --timeout);
- if (timeout <= 0)
- return -1;
-
- return 0;
-}
-
-/**
- * Perform an IEEE 802.3 clause 45 MII read. This function is used to
- * read PHY registers controlling auto negotiation.
- *
- * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- * support multiple busses.
- * @phy_id: The MII phy id
- * @device: MDIO Managable Device (MMD) id
- * @location: Register location to read
- *
- * Returns Result from the read or -1 on failure
- */
-
-static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
- int location)
-{
- union cvmx_smix_cmd smi_cmd;
- union cvmx_smix_rd_dat smi_rd;
- union cvmx_smix_wr_dat smi_wr;
- int timeout = 1000;
-
- if (!octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
- return -1;
-
- __cvmx_mdio_set_clause45_mode(bus_id);
-
- smi_wr.u64 = 0;
- smi_wr.s.dat = location;
- cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
-
- smi_cmd.u64 = 0;
- smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
- smi_cmd.s.phy_adr = phy_id;
- smi_cmd.s.reg_adr = device;
- cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
- do {
- cvmx_wait(1000);
- smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
- } while (smi_wr.s.pending && --timeout);
- if (timeout <= 0) {
- cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
- "device %2d register %2d TIME OUT(address)\n",
- bus_id, phy_id, device, location);
- return -1;
- }
-
- smi_cmd.u64 = 0;
- smi_cmd.s.phy_op = MDIO_CLAUSE_45_READ;
- smi_cmd.s.phy_adr = phy_id;
- smi_cmd.s.reg_adr = device;
- cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
- do {
- cvmx_wait(1000);
- smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
- } while (smi_rd.s.pending && --timeout);
-
- if (timeout <= 0) {
- cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
- "device %2d register %2d TIME OUT(data)\n",
- bus_id, phy_id, device, location);
- return -1;
- }
-
- if (smi_rd.s.val)
- return smi_rd.s.dat;
- else {
- cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
- "device %2d register %2d INVALID READ\n",
- bus_id, phy_id, device, location);
- return -1;
- }
-}
-
-/**
- * Perform an IEEE 802.3 clause 45 MII write. This function is used to
- * write PHY registers controlling auto negotiation.
- *
- * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- * support multiple busses.
- * @phy_id: The MII phy id
- * @device: MDIO Managable Device (MMD) id
- * @location: Register location to write
- * @val: Value to write
- *
- * Returns -1 on error
- * 0 on success
- */
-static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device,
- int location, int val)
-{
- union cvmx_smix_cmd smi_cmd;
- union cvmx_smix_wr_dat smi_wr;
- int timeout = 1000;
-
- if (!octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
- return -1;
-
- __cvmx_mdio_set_clause45_mode(bus_id);
-
- smi_wr.u64 = 0;
- smi_wr.s.dat = location;
- cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
-
- smi_cmd.u64 = 0;
- smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
- smi_cmd.s.phy_adr = phy_id;
- smi_cmd.s.reg_adr = device;
- cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
- do {
- cvmx_wait(1000);
- smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
- } while (smi_wr.s.pending && --timeout);
- if (timeout <= 0)
- return -1;
-
- smi_wr.u64 = 0;
- smi_wr.s.dat = val;
- cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
-
- smi_cmd.u64 = 0;
- smi_cmd.s.phy_op = MDIO_CLAUSE_45_WRITE;
- smi_cmd.s.phy_adr = phy_id;
- smi_cmd.s.reg_adr = device;
- cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
-
- do {
- cvmx_wait(1000);
- smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
- } while (smi_wr.s.pending && --timeout);
- if (timeout <= 0)
- return -1;
-
- return 0;
-}
-
-#endif
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 9b63cd41213d..30d1129d8624 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -17,15 +17,18 @@
*/
#include <linux/ioport.h>
+#include <linux/list.h>
#include <linux/of.h>
+#ifdef CONFIG_PCI_DRIVERS_LEGACY
+
/*
* Each pci channel is a top-level PCI bus seem by CPU. A machine with
* multiple PCI channels may have multiple PCI host controllers or a
* single controller supporting multiple channels.
*/
struct pci_controller {
- struct pci_controller *next;
+ struct list_head list;
struct pci_bus *bus;
struct device_node *of_node;
@@ -38,10 +41,12 @@ struct pci_controller {
struct resource *busn_resource;
unsigned long busn_offset;
+#ifndef CONFIG_PCI_DOMAINS_GENERIC
unsigned int index;
/* For compatibility with current (as of July 2003) pciutils
and XFree86. Eventually will be removed. */
unsigned int need_domain_info;
+#endif
/* Optional access methods for reading/writing the bus number
of the PCI controller */
@@ -59,12 +64,43 @@ extern void register_pci_controller(struct pci_controller *hose);
*/
extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+/* Do platform specific device initialization at pci_enable_device() time */
+extern int pcibios_plat_dev_init(struct pci_dev *dev);
+
+extern char * (*pcibios_plat_setup)(char *str);
+
+#ifdef CONFIG_OF
+/* this function parses memory ranges from a device node */
+extern void pci_load_of_ranges(struct pci_controller *hose,
+ struct device_node *node);
+#else
+static inline void pci_load_of_ranges(struct pci_controller *hose,
+ struct device_node *node) {}
+#endif
+
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ /* nothing to do */
+}
+#elif defined(CONFIG_PCI_DOMAINS)
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ hose->need_domain_info = need_domain_info;
+}
+#endif /* CONFIG_PCI_DOMAINS */
+
+#endif
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
-
-extern unsigned int pcibios_assign_all_busses(void);
+static inline unsigned int pcibios_assign_all_busses(void)
+{
+ return 1;
+}
extern unsigned long PCIBIOS_MIN_IO;
extern unsigned long PCIBIOS_MIN_MEM;
@@ -100,7 +136,12 @@ struct pci_dev;
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-#ifdef CONFIG_PCI_DOMAINS
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ return pci_domain_nr(bus);
+}
+#elif defined(CONFIG_PCI_DOMAINS)
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
static inline int pci_proc_domain(struct pci_bus *bus)
@@ -121,15 +162,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
return channel ? 15 : 14;
}
-extern char * (*pcibios_plat_setup)(char *str);
-
-#ifdef CONFIG_OF
-/* this function parses memory ranges from a device node */
-extern void pci_load_of_ranges(struct pci_controller *hose,
- struct device_node *node);
-#else
-static inline void pci_load_of_ranges(struct pci_controller *hose,
- struct device_node *node) {}
-#endif
-
#endif /* _ASM_PCI_H */
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index 93c079a1cfc8..a03e86969f78 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -67,11 +67,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
{
- pte_t *pte;
-
- pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_ZERO, PTE_ORDER);
-
- return pte;
+ return (pte_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, PTE_ORDER);
}
static inline struct page *pte_alloc_one(struct mm_struct *mm,
diff --git a/arch/mips/include/asm/pm-cps.h b/arch/mips/include/asm/pm-cps.h
index 625eda53d571..89d58d80b77b 100644
--- a/arch/mips/include/asm/pm-cps.h
+++ b/arch/mips/include/asm/pm-cps.h
@@ -13,10 +13,12 @@
/*
* The CM & CPC can only handle coherence & power control on a per-core basis,
- * thus in an MT system the VPEs within each core are coupled and can only
+ * thus in an MT system the VP(E)s within each core are coupled and can only
* enter or exit states requiring CM or CPC assistance in unison.
*/
-#ifdef CONFIG_MIPS_MT
+#if defined(CONFIG_CPU_MIPSR6)
+# define coupled_coherence cpu_has_vp
+#elif defined(CONFIG_MIPS_MT)
# define coupled_coherence cpu_has_mipsmt
#else
# define coupled_coherence 0
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index f6fc6aac5496..b6578611dddb 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -152,7 +152,7 @@ static inline int is_syscall_success(struct pt_regs *regs)
static inline long regs_return_value(struct pt_regs *regs)
{
- if (is_syscall_success(regs))
+ if (is_syscall_success(regs) || !user_mode(regs))
return regs->regs[2];
else
return -regs->regs[2];
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 8bc6c70a4030..060f23ff1817 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -85,6 +85,20 @@ static inline void __cpu_die(unsigned int cpu)
extern void play_dead(void);
#endif
+/*
+ * This function will set up the necessary IPIs for Linux to communicate
+ * with the CPUs in mask.
+ * Return 0 on success.
+ */
+int mips_smp_ipi_allocate(const struct cpumask *mask);
+
+/*
+ * This function will free up IPIs allocated with mips_smp_ipi_allocate to the
+ * CPUs in mask, which must be a subset of the IPIs that have been configured.
+ * Return 0 on success.
+ */
+int mips_smp_ipi_free(const struct cpumask *mask);
+
static inline void arch_send_call_function_single_ipi(int cpu)
{
extern struct plat_smp_ops *mp_ops; /* private */
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 4daf839cd8a8..89fa5c0b1579 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -859,7 +859,10 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ \
+ check_object_size(__cu_from, __cu_len, true); \
might_fault(); \
+ \
if (eva_kernel_access()) \
__cu_len = __invoke_copy_to_kernel(__cu_to, __cu_from, \
__cu_len); \
@@ -880,6 +883,9 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ \
+ check_object_size(__cu_from, __cu_len, true); \
+ \
if (eva_kernel_access()) \
__cu_len = __invoke_copy_to_kernel(__cu_to, __cu_from, \
__cu_len); \
@@ -898,6 +904,9 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ \
+ check_object_size(__cu_to, __cu_len, false); \
+ \
if (eva_kernel_access()) \
__cu_len = __invoke_copy_from_kernel_inatomic(__cu_to, \
__cu_from,\
@@ -932,6 +941,9 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ \
+ check_object_size(__cu_from, __cu_len, true); \
+ \
if (eva_kernel_access()) { \
__cu_len = __invoke_copy_to_kernel(__cu_to, \
__cu_from, \
@@ -1124,6 +1136,9 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ \
+ check_object_size(__cu_to, __cu_len, false); \
+ \
if (eva_kernel_access()) { \
__cu_len = __invoke_copy_from_kernel(__cu_to, \
__cu_from, \
@@ -1162,6 +1177,9 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ \
+ check_object_size(__cu_to, __cu_len, false); \
+ \
if (eva_kernel_access()) { \
__cu_len = __invoke_copy_from_kernel(__cu_to, \
__cu_from, \
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 58ad63d7eb42..9c7f3e136d50 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -1,5 +1,6 @@
/*
* Support for n32 Linux/MIPS ELF binaries.
+ * Author: Ralf Baechle (ralf@linux-mips.org)
*
* Copyright (C) 1999, 2001 Ralf Baechle
* Copyright (C) 1999, 2001 Silicon Graphics, Inc.
@@ -37,7 +38,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2)
#include <asm/processor.h>
-#include <linux/module.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
#include <linux/math64.h>
@@ -96,12 +96,6 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
#define ELF_CORE_EFLAGS EF_MIPS_ABI2
-MODULE_DESCRIPTION("Binary format loader for compatibility with n32 Linux/MIPS binaries");
-MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
-
-#undef MODULE_DESCRIPTION
-#undef MODULE_AUTHOR
-
#undef TASK_SIZE
#define TASK_SIZE TASK_SIZE32
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index 49fb881481f7..1ab34322dd97 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -1,5 +1,6 @@
/*
* Support for o32 Linux/MIPS ELF binaries.
+ * Author: Ralf Baechle (ralf@linux-mips.org)
*
* Copyright (C) 1999, 2001 Ralf Baechle
* Copyright (C) 1999, 2001 Silicon Graphics, Inc.
@@ -42,7 +43,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
#include <asm/processor.h>
-#include <linux/module.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
#include <linux/math64.h>
@@ -99,12 +99,6 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
value->tv_usec = rem / NSEC_PER_USEC;
}
-MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries");
-MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
-
-#undef MODULE_DESCRIPTION
-#undef MODULE_AUTHOR
-
#undef TASK_SIZE
#define TASK_SIZE TASK_SIZE32
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 46c227fc98f5..12c718181e5e 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -9,7 +9,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/signal.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/branch.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
@@ -866,3 +866,37 @@ unaligned:
force_sig(SIGBUS, current);
return -EFAULT;
}
+
+#if (defined CONFIG_KPROBES) || (defined CONFIG_UPROBES)
+
+int __insn_is_compact_branch(union mips_instruction insn)
+{
+ if (!cpu_has_mips_r6)
+ return 0;
+
+ switch (insn.i_format.opcode) {
+ case blezl_op:
+ case bgtzl_op:
+ case blez_op:
+ case bgtz_op:
+ /*
+ * blez[l] and bgtz[l] opcodes with non-zero rt
+ * are MIPS R6 compact branches
+ */
+ if (insn.i_format.rt)
+ return 1;
+ break;
+ case bc6_op:
+ case balc6_op:
+ case pop10_op:
+ case pop30_op:
+ case pop66_op:
+ case pop76_op:
+ return 1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__insn_is_compact_branch);
+
+#endif /* CONFIG_KPROBES || CONFIG_UPROBES */
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index 212f46f2014e..f5c8bce70db2 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -32,7 +32,8 @@
#include <asm/ptrace.h>
#include <asm/branch.h>
#include <asm/break.h>
-#include <asm/inst.h>
+
+#include "probes-common.h"
static const union mips_instruction breakpoint_insn = {
.b_format = {
@@ -55,63 +56,7 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
static int __kprobes insn_has_delayslot(union mips_instruction insn)
{
- switch (insn.i_format.opcode) {
-
- /*
- * This group contains:
- * jr and jalr are in r_format format.
- */
- case spec_op:
- switch (insn.r_format.func) {
- case jr_op:
- case jalr_op:
- break;
- default:
- goto insn_ok;
- }
-
- /*
- * This group contains:
- * bltz_op, bgez_op, bltzl_op, bgezl_op,
- * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
- */
- case bcond_op:
-
- /*
- * These are unconditional and in j_format.
- */
- case jal_op:
- case j_op:
-
- /*
- * These are conditional and in i_format.
- */
- case beq_op:
- case beql_op:
- case bne_op:
- case bnel_op:
- case blez_op:
- case blezl_op:
- case bgtz_op:
- case bgtzl_op:
-
- /*
- * These are the FPA/cp1 branch instructions.
- */
- case cop1_op:
-
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
- case lwc2_op: /* This is bbit0 on Octeon */
- case ldc2_op: /* This is bbit032 on Octeon */
- case swc2_op: /* This is bbit1 on Octeon */
- case sdc2_op: /* This is bbit132 on Octeon */
-#endif
- return 1;
- default:
- break;
- }
-insn_ok:
- return 0;
+ return __insn_has_delay_slot(insn);
}
/*
@@ -161,6 +106,12 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
goto out;
}
+ if (__insn_is_compact_branch(insn)) {
+ pr_notice("Kprobes for compact branches are not supported\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
/* insn: must be on special executable page on mips. */
p->ainsn.insn = get_insn_slot();
if (!p->ainsn.insn) {
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 0b29646bcee7..50fb62544df7 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -26,7 +26,6 @@
#include <linux/utsname.h>
#include <linux/personality.h>
#include <linux/dnotify.h>
-#include <linux/module.h>
#include <linux/binfmts.h>
#include <linux/security.h>
#include <linux/compat.h>
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index 566b8d2c092c..2a45867d3b4f 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -52,7 +52,7 @@ static phys_addr_t mips_cpc_phys_base(void)
int mips_cpc_probe(void)
{
phys_addr_t addr;
- unsigned cpu;
+ unsigned int cpu;
for_each_possible_cpu(cpu)
spin_lock_init(&per_cpu(cpc_core_lock, cpu));
@@ -70,7 +70,12 @@ int mips_cpc_probe(void)
void mips_cpc_lock_other(unsigned int core)
{
- unsigned curr_core;
+ unsigned int curr_core;
+
+ if (mips_cm_revision() >= CM_REV_CM3)
+ /* Systems with CM >= 3 lock the CPC via mips_cm_lock_other */
+ return;
+
preempt_disable();
curr_core = current_cpu_data.core;
spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core),
@@ -86,7 +91,13 @@ void mips_cpc_lock_other(unsigned int core)
void mips_cpc_unlock_other(void)
{
- unsigned curr_core = current_cpu_data.core;
+ unsigned int curr_core;
+
+ if (mips_cm_revision() >= CM_REV_CM3)
+ /* Systems with CM >= 3 lock the CPC via mips_cm_lock_other */
+ return;
+
+ curr_core = current_cpu_data.core;
spin_unlock_irqrestore(&per_cpu(cpc_core_lock, curr_core),
per_cpu(cpc_core_lock_flags, curr_core));
preempt_enable();
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index 0a7e10b5f9e3..22dedd62818a 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -15,7 +15,6 @@
#include <linux/debugfs.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/ptrace.h>
#include <linux/seq_file.h>
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 79850e376ef6..94627a3a6a0d 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -20,6 +20,7 @@
#undef DEBUG
+#include <linux/extable.h>
#include <linux/moduleloader.h>
#include <linux/elf.h>
#include <linux/mm.h>
diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c
index 5b31a9405ebc..7cf653e21423 100644
--- a/arch/mips/kernel/pm-cps.c
+++ b/arch/mips/kernel/pm-cps.c
@@ -8,6 +8,7 @@
* option) any later version.
*/
+#include <linux/cpuhotplug.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/slab.h>
@@ -70,13 +71,8 @@ static DEFINE_PER_CPU_ALIGNED(atomic_t, pm_barrier);
DEFINE_PER_CPU_ALIGNED(struct mips_static_suspend_state, cps_cpu_state);
/* A somewhat arbitrary number of labels & relocs for uasm */
-static struct uasm_label labels[32] __initdata;
-static struct uasm_reloc relocs[32] __initdata;
-
-/* CPU dependant sync types */
-static unsigned stype_intervention;
-static unsigned stype_memory;
-static unsigned stype_ordering;
+static struct uasm_label labels[32];
+static struct uasm_reloc relocs[32];
enum mips_reg {
zero, at, v0, v1, a0, a1, a2, a3,
@@ -134,7 +130,7 @@ int cps_pm_enter_state(enum cps_pm_state state)
return -EINVAL;
/* Calculate which coupled CPUs (VPEs) are online */
-#ifdef CONFIG_MIPS_MT
+#if defined(CONFIG_MIPS_MT) || defined(CONFIG_CPU_MIPSR6)
if (cpu_online(cpu)) {
cpumask_and(coupled_mask, cpu_online_mask,
&cpu_sibling_map[cpu]);
@@ -198,10 +194,10 @@ int cps_pm_enter_state(enum cps_pm_state state)
return 0;
}
-static void __init cps_gen_cache_routine(u32 **pp, struct uasm_label **pl,
- struct uasm_reloc **pr,
- const struct cache_desc *cache,
- unsigned op, int lbl)
+static void cps_gen_cache_routine(u32 **pp, struct uasm_label **pl,
+ struct uasm_reloc **pr,
+ const struct cache_desc *cache,
+ unsigned op, int lbl)
{
unsigned cache_size = cache->ways << cache->waybit;
unsigned i;
@@ -242,10 +238,10 @@ static void __init cps_gen_cache_routine(u32 **pp, struct uasm_label **pl,
uasm_i_nop(pp);
}
-static int __init cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
- struct uasm_reloc **pr,
- const struct cpuinfo_mips *cpu_info,
- int lbl)
+static int cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
+ struct uasm_reloc **pr,
+ const struct cpuinfo_mips *cpu_info,
+ int lbl)
{
unsigned i, fsb_size = 8;
unsigned num_loads = (fsb_size * 3) / 2;
@@ -272,14 +268,9 @@ static int __init cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
/* On older ones it's unavailable */
return -1;
- /* CPUs which do not require the workaround */
- case CPU_P5600:
- case CPU_I6400:
- return 0;
-
default:
- WARN_ONCE(1, "pm-cps: FSB flush unsupported for this CPU\n");
- return -1;
+ /* Assume that the CPU does not need this workaround */
+ return 0;
}
/*
@@ -320,8 +311,8 @@ static int __init cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
i * line_size * line_stride, t0);
}
- /* Completion barrier */
- uasm_i_sync(pp, stype_memory);
+ /* Barrier ensuring previous cache invalidates are complete */
+ uasm_i_sync(pp, STYPE_SYNC);
uasm_i_ehb(pp);
/* Check whether the pipeline stalled due to the FSB being full */
@@ -340,9 +331,9 @@ static int __init cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
return 0;
}
-static void __init cps_gen_set_top_bit(u32 **pp, struct uasm_label **pl,
- struct uasm_reloc **pr,
- unsigned r_addr, int lbl)
+static void cps_gen_set_top_bit(u32 **pp, struct uasm_label **pl,
+ struct uasm_reloc **pr,
+ unsigned r_addr, int lbl)
{
uasm_i_lui(pp, t0, uasm_rel_hi(0x80000000));
uasm_build_label(pl, *pp, lbl);
@@ -353,7 +344,7 @@ static void __init cps_gen_set_top_bit(u32 **pp, struct uasm_label **pl,
uasm_i_nop(pp);
}
-static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
+static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
{
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
@@ -411,7 +402,7 @@ static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
if (coupled_coherence) {
/* Increment ready_count */
- uasm_i_sync(&p, stype_ordering);
+ uasm_i_sync(&p, STYPE_SYNC_MB);
uasm_build_label(&l, p, lbl_incready);
uasm_i_ll(&p, t1, 0, r_nc_count);
uasm_i_addiu(&p, t2, t1, 1);
@@ -419,8 +410,8 @@ static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
uasm_il_beqz(&p, &r, t2, lbl_incready);
uasm_i_addiu(&p, t1, t1, 1);
- /* Ordering barrier */
- uasm_i_sync(&p, stype_ordering);
+ /* Barrier ensuring all CPUs see the updated r_nc_count value */
+ uasm_i_sync(&p, STYPE_SYNC_MB);
/*
* If this is the last VPE to become ready for non-coherence
@@ -441,7 +432,8 @@ static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
uasm_i_lw(&p, t0, 0, r_nc_count);
uasm_il_bltz(&p, &r, t0, lbl_secondary_cont);
uasm_i_ehb(&p);
- uasm_i_yield(&p, zero, t1);
+ if (cpu_has_mipsmt)
+ uasm_i_yield(&p, zero, t1);
uasm_il_b(&p, &r, lbl_poll_cont);
uasm_i_nop(&p);
} else {
@@ -449,8 +441,21 @@ static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
* The core will lose power & this VPE will not continue
* so it can simply halt here.
*/
- uasm_i_addiu(&p, t0, zero, TCHALT_H);
- uasm_i_mtc0(&p, t0, 2, 4);
+ if (cpu_has_mipsmt) {
+ /* Halt the VPE via C0 tchalt register */
+ uasm_i_addiu(&p, t0, zero, TCHALT_H);
+ uasm_i_mtc0(&p, t0, 2, 4);
+ } else if (cpu_has_vp) {
+ /* Halt the VP via the CPC VP_STOP register */
+ unsigned int vpe_id;
+
+ vpe_id = cpu_vpe_id(&cpu_data[cpu]);
+ uasm_i_addiu(&p, t0, zero, 1 << vpe_id);
+ UASM_i_LA(&p, t1, (long)addr_cpc_cl_vp_stop());
+ uasm_i_sw(&p, t0, 0, t1);
+ } else {
+ BUG();
+ }
uasm_build_label(&l, p, lbl_secondary_hang);
uasm_il_b(&p, &r, lbl_secondary_hang);
uasm_i_nop(&p);
@@ -472,22 +477,24 @@ static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
cps_gen_cache_routine(&p, &l, &r, &cpu_data[cpu].dcache,
Index_Writeback_Inv_D, lbl_flushdcache);
- /* Completion barrier */
- uasm_i_sync(&p, stype_memory);
+ /* Barrier ensuring previous cache invalidates are complete */
+ uasm_i_sync(&p, STYPE_SYNC);
uasm_i_ehb(&p);
- /*
- * Disable all but self interventions. The load from COHCTL is defined
- * by the interAptiv & proAptiv SUMs as ensuring that the operation
- * resulting from the preceding store is complete.
- */
- uasm_i_addiu(&p, t0, zero, 1 << cpu_data[cpu].core);
- uasm_i_sw(&p, t0, 0, r_pcohctl);
- uasm_i_lw(&p, t0, 0, r_pcohctl);
-
- /* Sync to ensure previous interventions are complete */
- uasm_i_sync(&p, stype_intervention);
- uasm_i_ehb(&p);
+ if (mips_cm_revision() < CM_REV_CM3) {
+ /*
+ * Disable all but self interventions. The load from COHCTL is
+ * defined by the interAptiv & proAptiv SUMs as ensuring that the
+ * operation resulting from the preceding store is complete.
+ */
+ uasm_i_addiu(&p, t0, zero, 1 << cpu_data[cpu].core);
+ uasm_i_sw(&p, t0, 0, r_pcohctl);
+ uasm_i_lw(&p, t0, 0, r_pcohctl);
+
+ /* Barrier to ensure write to coherence control is complete */
+ uasm_i_sync(&p, STYPE_SYNC);
+ uasm_i_ehb(&p);
+ }
/* Disable coherence */
uasm_i_sw(&p, zero, 0, r_pcohctl);
@@ -531,8 +538,8 @@ static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
goto gen_done;
}
- /* Completion barrier */
- uasm_i_sync(&p, stype_memory);
+ /* Barrier to ensure write to CPC command is complete */
+ uasm_i_sync(&p, STYPE_SYNC);
uasm_i_ehb(&p);
}
@@ -562,26 +569,29 @@ static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
* will run this. The first will actually re-enable coherence & the
* rest will just be performing a rather unusual nop.
*/
- uasm_i_addiu(&p, t0, zero, CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK);
+ uasm_i_addiu(&p, t0, zero, mips_cm_revision() < CM_REV_CM3
+ ? CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK
+ : CM3_GCR_Cx_COHERENCE_COHEN_MSK);
+
uasm_i_sw(&p, t0, 0, r_pcohctl);
uasm_i_lw(&p, t0, 0, r_pcohctl);
- /* Completion barrier */
- uasm_i_sync(&p, stype_memory);
+ /* Barrier to ensure write to coherence control is complete */
+ uasm_i_sync(&p, STYPE_SYNC);
uasm_i_ehb(&p);
if (coupled_coherence && (state == CPS_PM_NC_WAIT)) {
/* Decrement ready_count */
uasm_build_label(&l, p, lbl_decready);
- uasm_i_sync(&p, stype_ordering);
+ uasm_i_sync(&p, STYPE_SYNC_MB);
uasm_i_ll(&p, t1, 0, r_nc_count);
uasm_i_addiu(&p, t2, t1, -1);
uasm_i_sc(&p, t2, 0, r_nc_count);
uasm_il_beqz(&p, &r, t2, lbl_decready);
uasm_i_andi(&p, v0, t1, (1 << fls(smp_num_siblings)) - 1);
- /* Ordering barrier */
- uasm_i_sync(&p, stype_ordering);
+ /* Barrier ensuring all CPUs see the updated r_nc_count value */
+ uasm_i_sync(&p, STYPE_SYNC_MB);
}
if (coupled_coherence && (state == CPS_PM_CLOCK_GATED)) {
@@ -602,8 +612,8 @@ static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
*/
uasm_build_label(&l, p, lbl_secondary_cont);
- /* Ordering barrier */
- uasm_i_sync(&p, stype_ordering);
+ /* Barrier ensuring all CPUs see the updated r_nc_count value */
+ uasm_i_sync(&p, STYPE_SYNC_MB);
}
/* The core is coherent, time to return to C code */
@@ -628,7 +638,7 @@ out_err:
return NULL;
}
-static int __init cps_gen_core_entries(unsigned cpu)
+static int cps_pm_online_cpu(unsigned int cpu)
{
enum cps_pm_state state;
unsigned core = cpu_data[cpu].core;
@@ -670,29 +680,10 @@ static int __init cps_gen_core_entries(unsigned cpu)
static int __init cps_pm_init(void)
{
- unsigned cpu;
- int err;
-
- /* Detect appropriate sync types for the system */
- switch (current_cpu_data.cputype) {
- case CPU_INTERAPTIV:
- case CPU_PROAPTIV:
- case CPU_M5150:
- case CPU_P5600:
- case CPU_I6400:
- stype_intervention = 0x2;
- stype_memory = 0x3;
- stype_ordering = 0x10;
- break;
-
- default:
- pr_warn("Power management is using heavyweight sync 0\n");
- }
-
/* A CM is required for all non-coherent states */
if (!mips_cm_present()) {
pr_warn("pm-cps: no CM, non-coherent states unavailable\n");
- goto out;
+ return 0;
}
/*
@@ -722,12 +713,7 @@ static int __init cps_pm_init(void)
pr_warn("pm-cps: no CPC, clock & power gating unavailable\n");
}
- for_each_present_cpu(cpu) {
- err = cps_gen_core_entries(cpu);
- if (err)
- return err;
- }
-out:
- return 0;
+ return cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "AP_PM_CPS_CPU_ONLINE",
+ cps_pm_online_cpu, NULL);
}
arch_initcall(cps_pm_init);
diff --git a/arch/mips/kernel/probes-common.h b/arch/mips/kernel/probes-common.h
new file mode 100644
index 000000000000..dd08e41134b6
--- /dev/null
+++ b/arch/mips/kernel/probes-common.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PROBES_COMMON_H
+#define __PROBES_COMMON_H
+
+#include <asm/inst.h>
+
+int __insn_is_compact_branch(union mips_instruction insn);
+
+static inline int __insn_has_delay_slot(const union mips_instruction insn)
+{
+ switch (insn.i_format.opcode) {
+ /*
+ * jr and jalr are in r_format format.
+ */
+ case spec_op:
+ switch (insn.r_format.func) {
+ case jalr_op:
+ case jr_op:
+ return 1;
+ }
+ break;
+
+ /*
+ * This group contains:
+ * bltz_op, bgez_op, bltzl_op, bgezl_op,
+ * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
+ */
+ case bcond_op:
+ switch (insn.i_format.rt) {
+ case bltz_op:
+ case bltzl_op:
+ case bgez_op:
+ case bgezl_op:
+ case bltzal_op:
+ case bltzall_op:
+ case bgezal_op:
+ case bgezall_op:
+ case bposge32_op:
+ return 1;
+ }
+ break;
+
+ /*
+ * These are unconditional and in j_format.
+ */
+ case jal_op:
+ case j_op:
+ case beq_op:
+ case beql_op:
+ case bne_op:
+ case bnel_op:
+ case blez_op: /* not really i_format */
+ case blezl_op:
+ case bgtz_op:
+ case bgtzl_op:
+ return 1;
+
+ /*
+ * And now the FPA/cp1 branch instructions.
+ */
+ case cop1_op:
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+ case lwc2_op: /* This is bbit0 on Octeon */
+ case ldc2_op: /* This is bbit032 on Octeon */
+ case swc2_op: /* This is bbit1 on Octeon */
+ case sdc2_op: /* This is bbit132 on Octeon */
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+#endif /* __PROBES_COMMON_H */
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 97dc01b03631..4eff2aed7360 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -135,6 +135,13 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "package\t\t\t: %d\n", cpu_data[n].package);
seq_printf(m, "core\t\t\t: %d\n", cpu_data[n].core);
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_CPU_MIPSR6)
+ if (cpu_has_mipsmt)
+ seq_printf(m, "VPE\t\t\t: %d\n", cpu_data[n].vpe_id);
+ else if (cpu_has_vp)
+ seq_printf(m, "VP\t\t\t: %d\n", cpu_data[n].vpe_id);
+#endif
+
sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
cpu_has_vce ? "%u" : "not available");
seq_printf(m, fmt, 'D', vced_count);
diff --git a/arch/mips/kernel/smp-gic.c b/arch/mips/kernel/smp-gic.c
deleted file mode 100644
index 9b63829cf929..000000000000
--- a/arch/mips/kernel/smp-gic.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2013 Imagination Technologies
- * Author: Paul Burton <paul.burton@imgtec.com>
- *
- * Based on smp-cmp.c:
- * Copyright (C) 2007 MIPS Technologies, Inc.
- * Author: Chris Dearman (chris@mips.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/irqchip/mips-gic.h>
-#include <linux/printk.h>
-
-#include <asm/mips-cpc.h>
-#include <asm/smp-ops.h>
-
-void gic_send_ipi_single(int cpu, unsigned int action)
-{
- unsigned long flags;
- unsigned int intr;
- unsigned int core = cpu_data[cpu].core;
-
- pr_debug("CPU%d: %s cpu %d action %u status %08x\n",
- smp_processor_id(), __func__, cpu, action, read_c0_status());
-
- local_irq_save(flags);
-
- switch (action) {
- case SMP_CALL_FUNCTION:
- intr = plat_ipi_call_int_xlate(cpu);
- break;
-
- case SMP_RESCHEDULE_YOURSELF:
- intr = plat_ipi_resched_int_xlate(cpu);
- break;
-
- default:
- BUG();
- }
-
- gic_send_ipi(intr);
-
- if (mips_cpc_present() && (core != current_cpu_data.core)) {
- while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
- mips_cm_lock_other(core, 0);
- mips_cpc_lock_other(core);
- write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
- mips_cpc_unlock_other();
- mips_cm_unlock_other();
- }
- }
-
- local_irq_restore(flags);
-}
-
-void gic_send_ipi_mask(const struct cpumask *mask, unsigned int action)
-{
- unsigned int i;
-
- for_each_cpu(i, mask)
- gic_send_ipi_single(i, action);
-}
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 4f9570a57e8d..e077ea3e11fb 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -289,26 +289,3 @@ struct plat_smp_ops vsmp_smp_ops = {
.prepare_cpus = vsmp_prepare_cpus,
};
-#ifdef CONFIG_PROC_FS
-static int proc_cpuinfo_chain_call(struct notifier_block *nfb,
- unsigned long action_unused, void *data)
-{
- struct proc_cpuinfo_notifier_args *pcn = data;
- struct seq_file *m = pcn->m;
- unsigned long n = pcn->n;
-
- if (!cpu_has_mipsmt)
- return NOTIFY_OK;
-
- seq_printf(m, "VPE\t\t\t: %d\n", cpu_data[n].vpe_id);
-
- return NOTIFY_OK;
-}
-
-static int __init proc_cpuinfo_notifier_init(void)
-{
- return proc_cpuinfo_notifier(proc_cpuinfo_chain_call, 0);
-}
-
-subsys_initcall(proc_cpuinfo_notifier_init);
-#endif
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index b0baf48951fa..7ebb1918e2ac 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -25,7 +25,7 @@
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/threads.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/sched.h>
@@ -192,9 +192,11 @@ void mips_smp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
continue;
while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+ mips_cm_lock_other(core, 0);
mips_cpc_lock_other(core);
write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
mips_cpc_unlock_other();
+ mips_cm_unlock_other();
}
}
}
@@ -229,7 +231,7 @@ static struct irqaction irq_call = {
.name = "IPI call"
};
-static __init void smp_ipi_init_one(unsigned int virq,
+static void smp_ipi_init_one(unsigned int virq,
struct irqaction *action)
{
int ret;
@@ -239,9 +241,11 @@ static __init void smp_ipi_init_one(unsigned int virq,
BUG_ON(ret);
}
-static int __init mips_smp_ipi_init(void)
+static unsigned int call_virq, sched_virq;
+
+int mips_smp_ipi_allocate(const struct cpumask *mask)
{
- unsigned int call_virq, sched_virq;
+ int virq;
struct irq_domain *ipidomain;
struct device_node *node;
@@ -268,16 +272,20 @@ static int __init mips_smp_ipi_init(void)
if (!ipidomain)
return 0;
- call_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
- BUG_ON(!call_virq);
+ virq = irq_reserve_ipi(ipidomain, mask);
+ BUG_ON(!virq);
+ if (!call_virq)
+ call_virq = virq;
- sched_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
- BUG_ON(!sched_virq);
+ virq = irq_reserve_ipi(ipidomain, mask);
+ BUG_ON(!virq);
+ if (!sched_virq)
+ sched_virq = virq;
if (irq_domain_is_ipi_per_cpu(ipidomain)) {
int cpu;
- for_each_cpu(cpu, cpu_possible_mask) {
+ for_each_cpu(cpu, mask) {
smp_ipi_init_one(call_virq + cpu, &irq_call);
smp_ipi_init_one(sched_virq + cpu, &irq_resched);
}
@@ -286,6 +294,45 @@ static int __init mips_smp_ipi_init(void)
smp_ipi_init_one(sched_virq, &irq_resched);
}
+ return 0;
+}
+
+int mips_smp_ipi_free(const struct cpumask *mask)
+{
+ struct irq_domain *ipidomain;
+ struct device_node *node;
+
+ node = of_irq_find_parent(of_root);
+ ipidomain = irq_find_matching_host(node, DOMAIN_BUS_IPI);
+
+ /*
+ * Some platforms have half DT setup. So if we found irq node but
+ * didn't find an ipidomain, try to search for one that is not in the
+ * DT.
+ */
+ if (node && !ipidomain)
+ ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI);
+
+ BUG_ON(!ipidomain);
+
+ if (irq_domain_is_ipi_per_cpu(ipidomain)) {
+ int cpu;
+
+ for_each_cpu(cpu, mask) {
+ remove_irq(call_virq + cpu, &irq_call);
+ remove_irq(sched_virq + cpu, &irq_resched);
+ }
+ }
+ irq_destroy_ipi(call_virq, mask);
+ irq_destroy_ipi(sched_virq, mask);
+ return 0;
+}
+
+
+static int __init mips_smp_ipi_init(void)
+{
+ mips_smp_ipi_allocate(cpu_possible_mask);
+
call_desc = irq_to_desc(call_virq);
sched_desc = irq_to_desc(sched_virq);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 3de85be2486a..1f5fdee1dfc3 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/extable.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/smp.h>
@@ -48,6 +49,7 @@
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
#include <asm/idle.h>
+#include <asm/mips-cm.h>
#include <asm/mips-r2-to-r6-emul.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
@@ -444,6 +446,8 @@ asmlinkage void do_be(struct pt_regs *regs)
if (board_be_handler)
action = board_be_handler(regs, fixup != NULL);
+ else
+ mips_cm_error_report();
switch (action) {
case MIPS_BE_DISCARD:
@@ -2091,6 +2095,14 @@ static void configure_exception_vector(void)
{
if (cpu_has_veic || cpu_has_vint) {
unsigned long sr = set_c0_status(ST0_BEV);
+ /* If available, use WG to set top bits of EBASE */
+ if (cpu_has_ebase_wg) {
+#ifdef CONFIG_64BIT
+ write_c0_ebase_64(ebase | MIPS_EBASE_WG);
+#else
+ write_c0_ebase(ebase | MIPS_EBASE_WG);
+#endif
+ }
write_c0_ebase(ebase);
write_c0_status(sr);
/* Setting vector spacing enables EI/VI mode */
@@ -2127,8 +2139,17 @@ void per_cpu_trap_init(bool is_boot_cpu)
* We shouldn't trust a secondary core has a sane EBASE register
* so use the one calculated by the boot CPU.
*/
- if (!is_boot_cpu)
+ if (!is_boot_cpu) {
+ /* If available, use WG to set top bits of EBASE */
+ if (cpu_has_ebase_wg) {
+#ifdef CONFIG_64BIT
+ write_c0_ebase_64(ebase | MIPS_EBASE_WG);
+#else
+ write_c0_ebase(ebase | MIPS_EBASE_WG);
+#endif
+ }
write_c0_ebase(ebase);
+ }
cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
@@ -2209,13 +2230,39 @@ void __init trap_init(void)
if (cpu_has_veic || cpu_has_vint) {
unsigned long size = 0x200 + VECTORSPACING*64;
+ phys_addr_t ebase_pa;
+
ebase = (unsigned long)
__alloc_bootmem(size, 1 << fls(size), 0);
+
+ /*
+ * Try to ensure ebase resides in KSeg0 if possible.
+ *
+ * It shouldn't generally be in XKPhys on MIPS64 to avoid
+ * hitting a poorly defined exception base for Cache Errors.
+ * The allocation is likely to be in the low 512MB of physical,
+ * in which case we should be able to convert to KSeg0.
+ *
+ * EVA is special though as it allows segments to be rearranged
+ * and to become uncached during cache error handling.
+ */
+ ebase_pa = __pa(ebase);
+ if (!IS_ENABLED(CONFIG_EVA) && !WARN_ON(ebase_pa >= 0x20000000))
+ ebase = CKSEG0ADDR(ebase_pa);
} else {
ebase = CAC_BASE;
- if (cpu_has_mips_r2_r6)
- ebase += (read_c0_ebase() & 0x3ffff000);
+ if (cpu_has_mips_r2_r6) {
+ if (cpu_has_ebase_wg) {
+#ifdef CONFIG_64BIT
+ ebase = (read_c0_ebase_64() & ~0xfff);
+#else
+ ebase = (read_c0_ebase() & ~0xfff);
+#endif
+ } else {
+ ebase += (read_c0_ebase() & 0x3ffff000);
+ }
+ }
}
if (cpu_has_mmips) {
diff --git a/arch/mips/kernel/uprobes.c b/arch/mips/kernel/uprobes.c
index 4c7c1558944a..dbb917403131 100644
--- a/arch/mips/kernel/uprobes.c
+++ b/arch/mips/kernel/uprobes.c
@@ -8,71 +8,12 @@
#include <asm/branch.h>
#include <asm/cpu-features.h>
#include <asm/ptrace.h>
-#include <asm/inst.h>
+
+#include "probes-common.h"
static inline int insn_has_delay_slot(const union mips_instruction insn)
{
- switch (insn.i_format.opcode) {
- /*
- * jr and jalr are in r_format format.
- */
- case spec_op:
- switch (insn.r_format.func) {
- case jalr_op:
- case jr_op:
- return 1;
- }
- break;
-
- /*
- * This group contains:
- * bltz_op, bgez_op, bltzl_op, bgezl_op,
- * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
- */
- case bcond_op:
- switch (insn.i_format.rt) {
- case bltz_op:
- case bltzl_op:
- case bgez_op:
- case bgezl_op:
- case bltzal_op:
- case bltzall_op:
- case bgezal_op:
- case bgezall_op:
- case bposge32_op:
- return 1;
- }
- break;
-
- /*
- * These are unconditional and in j_format.
- */
- case jal_op:
- case j_op:
- case beq_op:
- case beql_op:
- case bne_op:
- case bnel_op:
- case blez_op: /* not really i_format */
- case blezl_op:
- case bgtz_op:
- case bgtzl_op:
- return 1;
-
- /*
- * And now the FPA/cp1 branch instructions.
- */
- case cop1_op:
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
- case lwc2_op: /* This is bbit0 on Octeon */
- case ldc2_op: /* This is bbit032 on Octeon */
- case swc2_op: /* This is bbit1 on Octeon */
- case sdc2_op: /* This is bbit132 on Octeon */
-#endif
- return 1;
- }
-
- return 0;
+ return __insn_has_delay_slot(insn);
}
/**
@@ -95,6 +36,12 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *aup,
return -EINVAL;
inst.word = aup->insn[0];
+
+ if (__insn_is_compact_branch(inst)) {
+ pr_notice("Uprobes for compact branches are not supported\n");
+ return -EINVAL;
+ }
+
aup->ixol[0] = aup->insn[insn_has_delay_slot(inst)];
aup->ixol[1] = UPROBE_BRK_UPROBE_XOL; /* NOP */
@@ -282,19 +229,14 @@ int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm,
void __weak arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
void *src, unsigned long len)
{
- void *kaddr;
+ unsigned long kaddr, kstart;
/* Initialize the slot */
- kaddr = kmap_atomic(page);
- memcpy(kaddr + (vaddr & ~PAGE_MASK), src, len);
- kunmap_atomic(kaddr);
-
- /*
- * The MIPS version of flush_icache_range will operate safely on
- * user space addresses and more importantly, it doesn't require a
- * VMA argument.
- */
- flush_icache_range(vaddr, vaddr + len);
+ kaddr = (unsigned long)kmap_atomic(page);
+ kstart = kaddr + (vaddr & ~PAGE_MASK);
+ memcpy((void *)kstart, src, len);
+ flush_icache_range(kstart, kstart + len);
+ kunmap_atomic((void *)kaddr);
}
/**
diff --git a/arch/mips/kvm/commpage.c b/arch/mips/kvm/commpage.c
index a36b77e1705c..f43629979a0e 100644
--- a/arch/mips/kvm/commpage.c
+++ b/arch/mips/kvm/commpage.c
@@ -12,7 +12,6 @@
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/bootmem.h>
diff --git a/arch/mips/kvm/dyntrans.c b/arch/mips/kvm/dyntrans.c
index d280894915ed..010cef240688 100644
--- a/arch/mips/kvm/dyntrans.c
+++ b/arch/mips/kvm/dyntrans.c
@@ -13,7 +13,6 @@
#include <linux/err.h>
#include <linux/highmem.h>
#include <linux/kvm_host.h>
-#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/bootmem.h>
@@ -45,8 +44,8 @@ static int kvm_mips_trans_replace(struct kvm_vcpu *vcpu, u32 *opc,
} else if (KVM_GUEST_KSEGX((unsigned long) opc) == KVM_GUEST_KSEG23) {
local_irq_save(flags);
memcpy((void *)opc, (void *)&replace, sizeof(u32));
- local_flush_icache_range((unsigned long)opc,
- (unsigned long)opc + 32);
+ __local_flush_icache_user_range((unsigned long)opc,
+ (unsigned long)opc + 32);
local_irq_restore(flags);
} else {
kvm_err("%s: Invalid address: %p\n", __func__, opc);
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index 4db4c0370859..8770f32c9e0b 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -13,7 +13,6 @@
#include <linux/err.h>
#include <linux/ktime.h>
#include <linux/kvm_host.h>
-#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/bootmem.h>
diff --git a/arch/mips/kvm/interrupt.c b/arch/mips/kvm/interrupt.c
index ad28dac6b7e9..e88403b3dcdd 100644
--- a/arch/mips/kvm/interrupt.c
+++ b/arch/mips/kvm/interrupt.c
@@ -11,7 +11,6 @@
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/bootmem.h>
diff --git a/arch/mips/kvm/trap_emul.c b/arch/mips/kvm/trap_emul.c
index 3a5484f9aa50..3b20441f2beb 100644
--- a/arch/mips/kvm/trap_emul.c
+++ b/arch/mips/kvm/trap_emul.c
@@ -11,7 +11,6 @@
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/kvm_host.h>
diff --git a/arch/mips/lantiq/xway/vmmc.c b/arch/mips/lantiq/xway/vmmc.c
index 4625495f9230..577ec81b557d 100644
--- a/arch/mips/lantiq/xway/vmmc.c
+++ b/arch/mips/lantiq/xway/vmmc.c
@@ -6,7 +6,7 @@
* Copyright (C) 2012 John Crispin <john@phrozen.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/dma-mapping.h>
@@ -55,7 +55,6 @@ static const struct of_device_id vmmc_match[] = {
{ .compatible = "lantiq,vmmc-xway" },
{},
};
-MODULE_DEVICE_TABLE(of, vmmc_match);
static struct platform_driver vmmc_driver = {
.probe = vmmc_probe,
@@ -64,5 +63,4 @@ static struct platform_driver vmmc_driver = {
.of_match_table = vmmc_match,
},
};
-
-module_platform_driver(vmmc_driver);
+builtin_platform_driver(vmmc_driver);
diff --git a/arch/mips/lantiq/xway/xrx200_phy_fw.c b/arch/mips/lantiq/xway/xrx200_phy_fw.c
index 71e518c1e7e7..f0a0f2d431b2 100644
--- a/arch/mips/lantiq/xway/xrx200_phy_fw.c
+++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c
@@ -1,4 +1,7 @@
/*
+ * Lantiq XRX200 PHY Firmware Loader
+ * Author: John Crispin
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
@@ -8,7 +11,6 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
-#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/of_platform.h>
@@ -100,7 +102,6 @@ static const struct of_device_id xway_phy_match[] = {
{ .compatible = "lantiq,phy-xrx200" },
{},
};
-MODULE_DEVICE_TABLE(of, xway_phy_match);
static struct platform_driver xway_phy_driver = {
.probe = xway_phy_fw_probe,
@@ -109,9 +110,4 @@ static struct platform_driver xway_phy_driver = {
.of_match_table = xway_phy_match,
},
};
-
-module_platform_driver(xway_phy_driver);
-
-MODULE_AUTHOR("John Crispin <john@phrozen.org>");
-MODULE_DESCRIPTION("Lantiq XRX200 PHY Firmware Loader");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(xway_phy_driver);
diff --git a/arch/mips/lib/ashldi3.c b/arch/mips/lib/ashldi3.c
index 927dc94a030f..c3e22053d13e 100644
--- a/arch/mips/lib/ashldi3.c
+++ b/arch/mips/lib/ashldi3.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
#include "libgcc.h"
diff --git a/arch/mips/lib/ashrdi3.c b/arch/mips/lib/ashrdi3.c
index 9fdf1a598428..17456024873d 100644
--- a/arch/mips/lib/ashrdi3.c
+++ b/arch/mips/lib/ashrdi3.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
#include "libgcc.h"
diff --git a/arch/mips/lib/bswapdi.c b/arch/mips/lib/bswapdi.c
index e3e77aa52c95..a8114148f82a 100644
--- a/arch/mips/lib/bswapdi.c
+++ b/arch/mips/lib/bswapdi.c
@@ -1,4 +1,5 @@
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/compiler.h>
unsigned long long notrace __bswapdi2(unsigned long long u)
{
diff --git a/arch/mips/lib/bswapsi.c b/arch/mips/lib/bswapsi.c
index 530a8afe6fda..106fd978317d 100644
--- a/arch/mips/lib/bswapsi.c
+++ b/arch/mips/lib/bswapsi.c
@@ -1,4 +1,5 @@
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/compiler.h>
unsigned int notrace __bswapsi2(unsigned int u)
{
diff --git a/arch/mips/lib/cmpdi2.c b/arch/mips/lib/cmpdi2.c
index 06857da96993..9d849d8743c9 100644
--- a/arch/mips/lib/cmpdi2.c
+++ b/arch/mips/lib/cmpdi2.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
#include "libgcc.h"
diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c
index 21d27c6819a2..2307a3cb2714 100644
--- a/arch/mips/lib/delay.c
+++ b/arch/mips/lib/delay.c
@@ -8,7 +8,7 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2007, 2014 Maciej W. Rozycki
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/param.h>
#include <linux/smp.h>
#include <linux/stringify.h>
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c
index fd35daa45314..8ed3f25a9047 100644
--- a/arch/mips/lib/iomap-pci.c
+++ b/arch/mips/lib/iomap-pci.c
@@ -7,9 +7,11 @@
* written by Ralf Baechle <ralf@linux-mips.org>
*/
#include <linux/pci.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/io.h>
+#ifdef CONFIG_PCI_DRIVERS_LEGACY
+
void __iomem *__pci_ioport_map(struct pci_dev *dev,
unsigned long port, unsigned int nr)
{
@@ -40,6 +42,8 @@ void __iomem *__pci_ioport_map(struct pci_dev *dev,
return (void __iomem *) (ctrl->io_map_base + port);
}
+#endif /* CONFIG_PCI_DRIVERS_LEGACY */
+
void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
{
iounmap(addr);
diff --git a/arch/mips/lib/iomap.c b/arch/mips/lib/iomap.c
index 8e7e378ce51c..9daa92428e23 100644
--- a/arch/mips/lib/iomap.c
+++ b/arch/mips/lib/iomap.c
@@ -6,7 +6,7 @@
* (C) Copyright 2007 MIPS Technologies, Inc.
* written by Ralf Baechle <ralf@linux-mips.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/io.h>
/*
diff --git a/arch/mips/lib/lshrdi3.c b/arch/mips/lib/lshrdi3.c
index 364547449c65..221167c1be55 100644
--- a/arch/mips/lib/lshrdi3.c
+++ b/arch/mips/lib/lshrdi3.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
#include "libgcc.h"
diff --git a/arch/mips/lib/ucmpdi2.c b/arch/mips/lib/ucmpdi2.c
index bd599f58234c..08067fa538f2 100644
--- a/arch/mips/lib/ucmpdi2.c
+++ b/arch/mips/lib/ucmpdi2.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
#include "libgcc.h"
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 7704f20529d6..3c0c2f2096cd 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -19,6 +19,21 @@ config LOONGSON1_LS1B
select USE_GENERIC_EARLY_PRINTK_8250
select COMMON_CLK
+config LOONGSON1_LS1C
+ bool "Loongson LS1C board"
+ select CEVT_R4K if !MIPS_EXTERNAL_TIMER
+ select CSRC_R4K if !MIPS_EXTERNAL_TIMER
+ select SYS_HAS_CPU_LOONGSON1C
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select IRQ_MIPS_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_MIPS16
+ select SYS_HAS_EARLY_PRINTK
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select COMMON_CLK
endchoice
menuconfig CEVT_CSRC_LS1X
diff --git a/arch/mips/loongson32/Makefile b/arch/mips/loongson32/Makefile
index 5f4bd6e071ca..1ab2c5bbc066 100644
--- a/arch/mips/loongson32/Makefile
+++ b/arch/mips/loongson32/Makefile
@@ -9,3 +9,9 @@ obj-$(CONFIG_MACH_LOONGSON32) += common/
#
obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
+
+#
+# Loongson LS1C board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1C) += ls1c/
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
index ebb6dc290f0a..ffe01c6d0037 100644
--- a/arch/mips/loongson32/Platform
+++ b/arch/mips/loongson32/Platform
@@ -5,3 +5,4 @@ cflags-$(CONFIG_CPU_LOONGSON1) += \
platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32
load-$(CONFIG_LOONGSON1_LS1B) += 0xffffffff80100000
+load-$(CONFIG_LOONGSON1_LS1C) += 0xffffffff80100000
diff --git a/arch/mips/loongson32/common/irq.c b/arch/mips/loongson32/common/irq.c
index 455a7704a90f..635a4abe1f48 100644
--- a/arch/mips/loongson32/common/irq.c
+++ b/arch/mips/loongson32/common/irq.c
@@ -62,12 +62,58 @@ static void ls1x_irq_unmask(struct irq_data *d)
| (1 << bit), LS1X_INTC_INTIEN(n));
}
+static int ls1x_irq_settype(struct irq_data *d, unsigned int type)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ | (1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ & ~(1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ & ~(1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ | (1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_NONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static struct irq_chip ls1x_irq_chip = {
.name = "LS1X-INTC",
.irq_ack = ls1x_irq_ack,
.irq_mask = ls1x_irq_mask,
.irq_mask_ack = ls1x_irq_mask_ack,
.irq_unmask = ls1x_irq_unmask,
+ .irq_set_type = ls1x_irq_settype,
};
static void ls1x_irq_dispatch(int n)
@@ -107,7 +153,7 @@ asmlinkage void plat_irq_dispatch(void)
}
-struct irqaction cascade_irqaction = {
+static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
@@ -120,7 +166,7 @@ static void __init ls1x_irq_init(int base)
/* Disable interrupts and clear pending,
* setup all IRQs as high level triggered
*/
- for (n = 0; n < 4; n++) {
+ for (n = 0; n < INTN; n++) {
__raw_writel(0x0, LS1X_INTC_INTIEN(n));
__raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
__raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
@@ -129,7 +175,7 @@ static void __init ls1x_irq_init(int base)
}
- for (n = base; n < LS1X_IRQS; n++) {
+ for (n = base; n < NR_IRQS; n++) {
irq_set_chip_and_handler(n, &ls1x_irq_chip,
handle_level_irq);
}
@@ -138,6 +184,9 @@ static void __init ls1x_irq_init(int base)
setup_irq(INT1_IRQ, &cascade_irqaction);
setup_irq(INT2_IRQ, &cascade_irqaction);
setup_irq(INT3_IRQ, &cascade_irqaction);
+#if defined(CONFIG_LOONGSON1_LS1C)
+ setup_irq(INT4_IRQ, &cascade_irqaction);
+#endif
}
void __init arch_init_irq(void)
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index f2c714d8fb60..beff0852c6a4 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -17,11 +17,16 @@
#include <linux/stmmac.h>
#include <linux/usb/ehci_pdriver.h>
+#include <platform.h>
#include <loongson1.h>
#include <cpufreq.h>
#include <dma.h>
#include <nand.h>
+#define LS1X_RTC_CTRL ((void __iomem *)KSEG1ADDR(LS1X_RTC_BASE + 0x40))
+#define RTC_EXTCLK_OK (BIT(5) | BIT(8))
+#define RTC_EXTCLK_EN BIT(8)
+
/* 8250/16550 compatible UART */
#define LS1X_UART(_id) \
{ \
@@ -65,6 +70,15 @@ void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
p->uartclk = clk_get_rate(clk);
}
+void __init ls1x_rtc_set_extclk(struct platform_device *pdev)
+{
+ u32 val;
+
+ val = __raw_readl(LS1X_RTC_CTRL);
+ if (!(val & RTC_EXTCLK_OK))
+ __raw_writel(val | RTC_EXTCLK_EN, LS1X_RTC_CTRL);
+}
+
/* CPUFreq */
static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
.clk_name = "cpu_clk",
@@ -132,6 +146,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
val = __raw_readl(LS1X_MUX_CTRL1);
+#if defined(CONFIG_LOONGSON1_LS1B)
plat_dat = dev_get_platdata(&pdev->dev);
if (plat_dat->bus_id) {
__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
@@ -165,6 +180,17 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
val &= ~GMAC0_SHUT;
}
__raw_writel(val, LS1X_MUX_CTRL1);
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ plat_dat = dev_get_platdata(&pdev->dev);
+
+ val &= ~PHY_INTF_SELI;
+ if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
+ val |= 0x4 << PHY_INTF_SELI_SHIFT;
+ __raw_writel(val, LS1X_MUX_CTRL1);
+
+ val = __raw_readl(LS1X_MUX_CTRL0);
+ __raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
+#endif
return 0;
}
@@ -172,7 +198,11 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
static struct plat_stmmacenet_data ls1x_eth0_pdata = {
.bus_id = 0,
.phy_addr = -1,
+#if defined(CONFIG_LOONGSON1_LS1B)
.interface = PHY_INTERFACE_MODE_MII,
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ .interface = PHY_INTERFACE_MODE_RMII,
+#endif
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
.has_gmac = 1,
@@ -203,6 +233,7 @@ struct platform_device ls1x_eth0_pdev = {
},
};
+#ifdef CONFIG_LOONGSON1_LS1B
static struct plat_stmmacenet_data ls1x_eth1_pdata = {
.bus_id = 1,
.phy_addr = -1,
@@ -236,6 +267,7 @@ struct platform_device ls1x_eth1_pdev = {
.platform_data = &ls1x_eth1_pdata,
},
};
+#endif /* CONFIG_LOONGSON1_LS1B */
/* GPIO */
static struct resource ls1x_gpio0_resources[] = {
diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c
index 62f41afee241..1640744288ee 100644
--- a/arch/mips/loongson32/common/setup.c
+++ b/arch/mips/loongson32/common/setup.c
@@ -22,7 +22,11 @@ const char *get_system_type(void)
switch (processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON1B:
+#if defined(CONFIG_LOONGSON1_LS1B)
return "LOONGSON LS1B";
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ return "LOONGSON LS1C";
+#endif
default:
return "LOONGSON (unknown)";
}
diff --git a/arch/mips/loongson32/ls1c/Makefile b/arch/mips/loongson32/ls1c/Makefile
new file mode 100644
index 000000000000..a92c6cd3418d
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1C based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
new file mode 100644
index 000000000000..a96bed5e3ea6
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/board.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+static struct platform_device *ls1c_platform_devices[] __initdata = {
+ &ls1x_uart_pdev,
+ &ls1x_eth0_pdev,
+ &ls1x_rtc_pdev,
+};
+
+static int __init ls1c_platform_init(void)
+{
+ ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+ ls1x_rtc_set_extclk(&ls1x_rtc_pdev);
+
+ return platform_add_devices(ls1c_platform_devices,
+ ARRAY_SIZE(ls1c_platform_devices));
+}
+
+arch_initcall(ls1c_platform_init);
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..0e45b061e514 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -294,6 +294,8 @@ void octeon_cache_init(void)
flush_data_cache_page = octeon_flush_data_cache_page;
flush_icache_range = octeon_flush_icache_range;
local_flush_icache_range = local_octeon_flush_icache_range;
+ __flush_icache_user_range = octeon_flush_icache_range;
+ __local_flush_icache_user_range = local_octeon_flush_icache_range;
__flush_kernel_vmap_range = octeon_flush_kernel_vmap_range;
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 135ec313c1f6..21e4e662c1fa 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -325,6 +325,8 @@ void r3k_cache_init(void)
flush_cache_page = r3k_flush_cache_page;
flush_icache_range = r3k_flush_icache_range;
local_flush_icache_range = r3k_flush_icache_range;
+ __flush_icache_user_range = r3k_flush_icache_range;
+ __local_flush_icache_user_range = r3k_flush_icache_range;
__flush_kernel_vmap_range = r3k_flush_kernel_vmap_range;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index fa7d8d3790bf..88cfaf81c958 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -17,7 +17,7 @@
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/bitops.h>
#include <asm/bcache.h>
@@ -722,11 +722,13 @@ struct flush_icache_range_args {
unsigned long start;
unsigned long end;
unsigned int type;
+ bool user;
};
static inline void __local_r4k_flush_icache_range(unsigned long start,
unsigned long end,
- unsigned int type)
+ unsigned int type,
+ bool user)
{
if (!cpu_has_ic_fills_f_dc) {
if (type == R4K_INDEX ||
@@ -734,7 +736,10 @@ static inline void __local_r4k_flush_icache_range(unsigned long start,
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
- protected_blast_dcache_range(start, end);
+ if (user)
+ protected_blast_dcache_range(start, end);
+ else
+ blast_dcache_range(start, end);
}
}
@@ -748,27 +753,25 @@ static inline void __local_r4k_flush_icache_range(unsigned long start,
break;
default:
- protected_blast_icache_range(start, end);
+ if (user)
+ protected_blast_icache_range(start, end);
+ else
+ blast_icache_range(start, end);
break;
}
}
-#ifdef CONFIG_EVA
- /*
- * Due to all possible segment mappings, there might cache aliases
- * caused by the bootloader being in non-EVA mode, and the CPU switching
- * to EVA during early kernel init. It's best to flush the scache
- * to avoid having secondary cores fetching stale data and lead to
- * kernel crashes.
- */
- bc_wback_inv(start, (end - start));
- __sync();
-#endif
}
static inline void local_r4k_flush_icache_range(unsigned long start,
unsigned long end)
{
- __local_r4k_flush_icache_range(start, end, R4K_HIT | R4K_INDEX);
+ __local_r4k_flush_icache_range(start, end, R4K_HIT | R4K_INDEX, false);
+}
+
+static inline void local_r4k_flush_icache_user_range(unsigned long start,
+ unsigned long end)
+{
+ __local_r4k_flush_icache_range(start, end, R4K_HIT | R4K_INDEX, true);
}
static inline void local_r4k_flush_icache_range_ipi(void *args)
@@ -777,11 +780,13 @@ static inline void local_r4k_flush_icache_range_ipi(void *args)
unsigned long start = fir_args->start;
unsigned long end = fir_args->end;
unsigned int type = fir_args->type;
+ bool user = fir_args->user;
- __local_r4k_flush_icache_range(start, end, type);
+ __local_r4k_flush_icache_range(start, end, type, user);
}
-static void r4k_flush_icache_range(unsigned long start, unsigned long end)
+static void __r4k_flush_icache_range(unsigned long start, unsigned long end,
+ bool user)
{
struct flush_icache_range_args args;
unsigned long size, cache_size;
@@ -789,6 +794,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
args.start = start;
args.end = end;
args.type = R4K_HIT | R4K_INDEX;
+ args.user = user;
/*
* Indexed cache ops require an SMP call.
@@ -814,6 +820,16 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
instruction_hazard();
}
+static void r4k_flush_icache_range(unsigned long start, unsigned long end)
+{
+ return __r4k_flush_icache_range(start, end, false);
+}
+
+static void r4k_flush_icache_user_range(unsigned long start, unsigned long end)
+{
+ return __r4k_flush_icache_range(start, end, true);
+}
+
#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
@@ -1915,9 +1931,16 @@ void r4k_cache_init(void)
flush_data_cache_page = r4k_flush_data_cache_page;
flush_icache_range = r4k_flush_icache_range;
local_flush_icache_range = local_r4k_flush_icache_range;
+ __flush_icache_user_range = r4k_flush_icache_user_range;
+ __local_flush_icache_user_range = local_r4k_flush_icache_user_range;
#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
- if (coherentio) {
+# if defined(CONFIG_DMA_PERDEV_COHERENT)
+ if (0) {
+# else
+ if ((coherentio == IO_COHERENCE_ENABLED) ||
+ ((coherentio == IO_COHERENCE_DEFAULT) && hw_coherentio)) {
+# endif
_dma_cache_wback_inv = (void *)cache_noop;
_dma_cache_wback = (void *)cache_noop;
_dma_cache_inv = (void *)cache_noop;
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index 596e18458e04..5c282583edf1 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -411,6 +411,9 @@ void tx39_cache_init(void)
break;
}
+ __flush_icache_user_range = flush_icache_range;
+ __local_flush_icache_user_range = local_flush_icache_range;
+
current_cpu_data.icache.waysize = icache_size / current_cpu_data.icache.ways;
current_cpu_data.dcache.waysize = dcache_size / current_cpu_data.dcache.ways;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index bf04c6c479a4..6db341347202 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -10,7 +10,7 @@
#include <linux/fcntl.h>
#include <linux/kernel.h>
#include <linux/linkage.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/syscalls.h>
#include <linux/mm.h>
@@ -33,6 +33,10 @@ void (*flush_icache_range)(unsigned long start, unsigned long end);
EXPORT_SYMBOL_GPL(flush_icache_range);
void (*local_flush_icache_range)(unsigned long start, unsigned long end);
EXPORT_SYMBOL_GPL(local_flush_icache_range);
+void (*__flush_icache_user_range)(unsigned long start, unsigned long end);
+EXPORT_SYMBOL_GPL(__flush_icache_user_range);
+void (*__local_flush_icache_user_range)(unsigned long start, unsigned long end);
+EXPORT_SYMBOL_GPL(__local_flush_icache_user_range);
void (*__flush_cache_vmap)(void);
void (*__flush_cache_vunmap)(void);
@@ -74,7 +78,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
if (!access_ok(VERIFY_WRITE, (void __user *) addr, bytes))
return -EFAULT;
- flush_icache_range(addr, addr + bytes);
+ __flush_icache_user_range(addr, addr + bytes);
return 0;
}
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index b2eadd6fa9a1..46d5696c4f27 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -11,7 +11,7 @@
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/scatterlist.h>
#include <linux/string.h>
#include <linux/gfp.h>
@@ -24,14 +24,15 @@
#include <dma-coherence.h>
-#ifdef CONFIG_DMA_MAYBE_COHERENT
-int coherentio = 0; /* User defined DMA coherency from command line. */
+#if defined(CONFIG_DMA_MAYBE_COHERENT) && !defined(CONFIG_DMA_PERDEV_COHERENT)
+/* User defined DMA coherency from command line. */
+enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
EXPORT_SYMBOL_GPL(coherentio);
int hw_coherentio = 0; /* Actual hardware supported DMA coherency setting. */
static int __init setcoherentio(char *str)
{
- coherentio = 1;
+ coherentio = IO_COHERENCE_ENABLED;
pr_info("Hardware DMA cache coherency (command line)\n");
return 0;
}
@@ -39,7 +40,7 @@ early_param("coherentio", setcoherentio);
static int __init setnocoherentio(char *str)
{
- coherentio = 0;
+ coherentio = IO_COHERENCE_DISABLED;
pr_info("Software DMA cache coherency (command line)\n");
return 0;
}
@@ -160,8 +161,7 @@ static void *mips_dma_alloc_coherent(struct device *dev, size_t size,
*dma_handle = plat_map_dma_mem(dev, ret, size);
if (!plat_device_is_coherent(dev)) {
dma_cache_wback_inv((unsigned long) ret, size);
- if (!hw_coherentio)
- ret = UNCAC_ADDR(ret);
+ ret = UNCAC_ADDR(ret);
}
return ret;
@@ -189,7 +189,7 @@ static void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
- if (!plat_device_is_coherent(dev) && !hw_coherentio)
+ if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
page = virt_to_page((void *) addr);
@@ -209,7 +209,7 @@ static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma,
unsigned long pfn;
int ret = -ENXIO;
- if (!plat_device_is_coherent(dev) && !hw_coherentio)
+ if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
pfn = page_to_pfn(virt_to_page((void *)addr));
diff --git a/arch/mips/mm/extable.c b/arch/mips/mm/extable.c
index 9d25d2ba4b9e..e474fa2efed4 100644
--- a/arch/mips/mm/extable.c
+++ b/arch/mips/mm/extable.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 1997, 99, 2001 - 2004 Ralf Baechle <ralf@linux-mips.org>
*/
-#include <linux/module.h>
+#include <linux/extable.h>
#include <linux/spinlock.h>
#include <asm/branch.h>
#include <asm/uaccess.h>
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 9560ad731120..d56a855828c2 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -18,7 +18,6 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/module.h>
#include <linux/kprobes.h>
#include <linux/perf_event.h>
#include <linux/uaccess.h>
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index d7258a103439..f13f51003bd8 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,5 +1,6 @@
#include <linux/compiler.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
#include <linux/highmem.h>
#include <linux/sched.h>
#include <linux/smp.h>
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 72f7478ee068..3a6edecc3f38 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -10,7 +10,7 @@
*/
#include <linux/bug.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/smp.h>
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index 8d5008cbdc0f..1f189627440f 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -6,7 +6,7 @@
* (C) Copyright 1995 1996 Linus Torvalds
* (C) Copyright 2001, 2002 Ralf Baechle
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/addrspace.h>
#include <asm/byteorder.h>
#include <linux/sched.h>
diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c
index 353037699512..d08ea3ff0f53 100644
--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@@ -10,7 +10,7 @@
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/mman.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/personality.h>
#include <linux/random.h>
#include <linux/sched.h>
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index c41953ca6605..6f804f5960ab 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -12,7 +12,6 @@
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/mm.h>
-#include <linux/module.h>
#include <linux/proc_fs.h>
#include <asm/bugs.h>
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index e8b335c16295..bba9c1484b41 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -14,7 +14,7 @@
#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/cpu.h>
#include <asm/cpu-type.h>
@@ -67,8 +67,11 @@ void local_flush_tlb_all(void)
entry = read_c0_wired();
- /* Blast 'em all away. */
- if (cpu_has_tlbinv) {
+ /*
+ * Blast 'em all away.
+ * If there are any wired entries, fall back to iterating
+ */
+ if (cpu_has_tlbinv && !entry) {
if (current_cpu_data.tlbsizevtlb) {
write_c0_index(0);
mtc0_tlbw_hazard();
diff --git a/arch/mips/mti-malta/malta-dt.c b/arch/mips/mti-malta/malta-dt.c
index 47a22889285f..4822943100f3 100644
--- a/arch/mips/mti-malta/malta-dt.c
+++ b/arch/mips/mti-malta/malta-dt.c
@@ -17,18 +17,3 @@ void __init device_tree_init(void)
{
unflatten_and_copy_device_tree();
}
-
-static const struct of_device_id bus_ids[] __initconst = {
- { .compatible = "simple-bus", },
- { .compatible = "isa", },
- {},
-};
-
-static int __init publish_devices(void)
-{
- if (!of_have_populated_dt())
- return 0;
-
- return of_platform_bus_probe(NULL, bus_ids, NULL);
-}
-device_initcall(publish_devices);
diff --git a/arch/mips/mti-malta/malta-dtshim.c b/arch/mips/mti-malta/malta-dtshim.c
index 151f4882ec8a..c398582c316f 100644
--- a/arch/mips/mti-malta/malta-dtshim.c
+++ b/arch/mips/mti-malta/malta-dtshim.c
@@ -13,18 +13,66 @@
#include <linux/libfdt.h>
#include <linux/of_fdt.h>
#include <linux/sizes.h>
+#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/fw/fw.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/malta.h>
+#include <asm/mips-cm.h>
#include <asm/page.h>
+#define ROCIT_REG_BASE 0x1f403000
+#define ROCIT_CONFIG_GEN1 (ROCIT_REG_BASE + 0x04)
+#define ROCIT_CONFIG_GEN1_MEMMAP_SHIFT 8
+#define ROCIT_CONFIG_GEN1_MEMMAP_MASK (0xf << 8)
+
static unsigned char fdt_buf[16 << 10] __initdata;
/* determined physical memory size, not overridden by command line args */
extern unsigned long physical_memsize;
-#define MAX_MEM_ARRAY_ENTRIES 1
+enum mem_map {
+ MEM_MAP_V1 = 0,
+ MEM_MAP_V2,
+};
+
+#define MAX_MEM_ARRAY_ENTRIES 2
-static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size)
+static __init int malta_scon(void)
+{
+ int scon = MIPS_REVISION_SCONID;
+
+ if (scon != MIPS_REVISION_SCON_OTHER)
+ return scon;
+
+ switch (MIPS_REVISION_CORID) {
+ case MIPS_REVISION_CORID_QED_RM5261:
+ case MIPS_REVISION_CORID_CORE_LV:
+ case MIPS_REVISION_CORID_CORE_FPGA:
+ case MIPS_REVISION_CORID_CORE_FPGAR2:
+ return MIPS_REVISION_SCON_GT64120;
+
+ case MIPS_REVISION_CORID_CORE_EMUL_BON:
+ case MIPS_REVISION_CORID_BONITO64:
+ case MIPS_REVISION_CORID_CORE_20K:
+ return MIPS_REVISION_SCON_BONITO;
+
+ case MIPS_REVISION_CORID_CORE_MSC:
+ case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_24K:
+ return MIPS_REVISION_SCON_SOCIT;
+
+ case MIPS_REVISION_CORID_CORE_FPGA3:
+ case MIPS_REVISION_CORID_CORE_FPGA4:
+ case MIPS_REVISION_CORID_CORE_FPGA5:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ default:
+ return MIPS_REVISION_SCON_ROCIT;
+ }
+}
+
+static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size,
+ enum mem_map map)
{
unsigned long size_preio;
unsigned entries;
@@ -39,11 +87,47 @@ static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size)
* DDR but limits it to 2GB.
*/
mem_array[1] = cpu_to_be32(size);
+ goto done;
+ }
+
+ size_preio = min_t(unsigned long, size, SZ_256M);
+ mem_array[1] = cpu_to_be32(size_preio);
+ size -= size_preio;
+ if (!size)
+ goto done;
+
+ if (map == MEM_MAP_V2) {
+ /*
+ * We have a flat 32 bit physical memory map with DDR filling
+ * all 4GB of the memory map, apart from the I/O region which
+ * obscures 256MB from 0x10000000-0x1fffffff.
+ *
+ * Therefore we discard the 256MB behind the I/O region.
+ */
+ if (size <= SZ_256M)
+ goto done;
+ size -= SZ_256M;
+
+ /* Make use of the memory following the I/O region */
+ entries++;
+ mem_array[2] = cpu_to_be32(PHYS_OFFSET + SZ_512M);
+ mem_array[3] = cpu_to_be32(size);
} else {
- size_preio = min_t(unsigned long, size, SZ_256M);
- mem_array[1] = cpu_to_be32(size_preio);
+ /*
+ * We have a 32 bit physical memory map with a 2GB DDR region
+ * aliased in the upper & lower halves of it. The I/O region
+ * obscures 256MB from 0x10000000-0x1fffffff in the low alias
+ * but the DDR it obscures is accessible via the high alias.
+ *
+ * Simply access everything beyond the lowest 256MB of DDR using
+ * the high alias.
+ */
+ entries++;
+ mem_array[2] = cpu_to_be32(PHYS_OFFSET + SZ_2G + SZ_256M);
+ mem_array[3] = cpu_to_be32(size);
}
+done:
BUG_ON(entries > MAX_MEM_ARRAY_ENTRIES);
return entries;
}
@@ -54,6 +138,8 @@ static void __init append_memory(void *fdt, int root_off)
unsigned long memsize;
unsigned mem_entries;
int i, err, mem_off;
+ enum mem_map mem_map;
+ u32 config;
char *var, param_name[10], *var_names[] = {
"ememsize", "memsize",
};
@@ -106,6 +192,20 @@ static void __init append_memory(void *fdt, int root_off)
/* if the user says there's more RAM than we thought, believe them */
physical_memsize = max_t(unsigned long, physical_memsize, memsize);
+ /* detect the memory map in use */
+ if (malta_scon() == MIPS_REVISION_SCON_ROCIT) {
+ /* ROCit has a register indicating the memory map in use */
+ config = readl((void __iomem *)CKSEG1ADDR(ROCIT_CONFIG_GEN1));
+ mem_map = config & ROCIT_CONFIG_GEN1_MEMMAP_MASK;
+ mem_map >>= ROCIT_CONFIG_GEN1_MEMMAP_SHIFT;
+ } else {
+ /* if not using ROCit, presume the v1 memory map */
+ mem_map = MEM_MAP_V1;
+ }
+ if (mem_map > MEM_MAP_V2)
+ panic("Unsupported physical memory map v%u detected",
+ (unsigned int)mem_map);
+
/* append memory to the DT */
mem_off = fdt_add_subnode(fdt, root_off, "memory");
if (mem_off < 0)
@@ -115,19 +215,93 @@ static void __init append_memory(void *fdt, int root_off)
if (err)
panic("Unable to set memory node device_type: %d", err);
- mem_entries = gen_fdt_mem_array(mem_array, physical_memsize);
+ mem_entries = gen_fdt_mem_array(mem_array, physical_memsize, mem_map);
err = fdt_setprop(fdt, mem_off, "reg", mem_array,
mem_entries * 2 * sizeof(mem_array[0]));
if (err)
panic("Unable to set memory regs property: %d", err);
- mem_entries = gen_fdt_mem_array(mem_array, memsize);
+ mem_entries = gen_fdt_mem_array(mem_array, memsize, mem_map);
err = fdt_setprop(fdt, mem_off, "linux,usable-memory", mem_array,
mem_entries * 2 * sizeof(mem_array[0]));
if (err)
panic("Unable to set linux,usable-memory property: %d", err);
}
+static void __init remove_gic(void *fdt)
+{
+ int err, gic_off, i8259_off, cpu_off;
+ void __iomem *biu_base;
+ uint32_t cpu_phandle, sc_cfg;
+
+ /* if we have a CM which reports a GIC is present, leave the DT alone */
+ err = mips_cm_probe();
+ if (!err && (read_gcr_gic_status() & CM_GCR_GIC_STATUS_GICEX_MSK))
+ return;
+
+ if (malta_scon() == MIPS_REVISION_SCON_ROCIT) {
+ /*
+ * On systems using the RocIT system controller a GIC may be
+ * present without a CM. Detect whether that is the case.
+ */
+ biu_base = ioremap_nocache(MSC01_BIU_REG_BASE,
+ MSC01_BIU_ADDRSPACE_SZ);
+ sc_cfg = __raw_readl(biu_base + MSC01_SC_CFG_OFS);
+ if (sc_cfg & MSC01_SC_CFG_GICPRES_MSK) {
+ /* enable the GIC at the system controller level */
+ sc_cfg |= BIT(MSC01_SC_CFG_GICENA_SHF);
+ __raw_writel(sc_cfg, biu_base + MSC01_SC_CFG_OFS);
+ return;
+ }
+ }
+
+ gic_off = fdt_node_offset_by_compatible(fdt, -1, "mti,gic");
+ if (gic_off < 0) {
+ pr_warn("malta-dtshim: unable to find DT GIC node: %d\n",
+ gic_off);
+ return;
+ }
+
+ err = fdt_nop_node(fdt, gic_off);
+ if (err)
+ pr_warn("malta-dtshim: unable to nop GIC node\n");
+
+ i8259_off = fdt_node_offset_by_compatible(fdt, -1, "intel,i8259");
+ if (i8259_off < 0) {
+ pr_warn("malta-dtshim: unable to find DT i8259 node: %d\n",
+ i8259_off);
+ return;
+ }
+
+ cpu_off = fdt_node_offset_by_compatible(fdt, -1,
+ "mti,cpu-interrupt-controller");
+ if (cpu_off < 0) {
+ pr_warn("malta-dtshim: unable to find CPU intc node: %d\n",
+ cpu_off);
+ return;
+ }
+
+ cpu_phandle = fdt_get_phandle(fdt, cpu_off);
+ if (!cpu_phandle) {
+ pr_warn("malta-dtshim: unable to get CPU intc phandle\n");
+ return;
+ }
+
+ err = fdt_setprop_u32(fdt, i8259_off, "interrupt-parent", cpu_phandle);
+ if (err) {
+ pr_warn("malta-dtshim: unable to set i8259 interrupt-parent: %d\n",
+ err);
+ return;
+ }
+
+ err = fdt_setprop_u32(fdt, i8259_off, "interrupts", 2);
+ if (err) {
+ pr_warn("malta-dtshim: unable to set i8259 interrupts: %d\n",
+ err);
+ return;
+ }
+}
+
void __init *malta_dt_shim(void *fdt)
{
int root_off, len, err;
@@ -153,6 +327,7 @@ void __init *malta_dt_shim(void *fdt)
return fdt;
append_memory(fdt_buf, root_off);
+ remove_gic(fdt_buf);
err = fdt_pack(fdt_buf);
if (err)
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index dc2c5214809d..0f3b881a3190 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/pci_regs.h>
#include <linux/serial_core.h>
#include <asm/cacheflush.h>
@@ -242,23 +243,19 @@ mips_pci_controller:
MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
#endif
-#ifndef CONFIG_EVA
- /* Fix up target memory mapping. */
- MSC_READ(MSC01_PCI_BAR0, mask);
- MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK);
-#else
+
/*
* Setup the Malta max (2GB) memory for PCI DMA in host bridge
- * in transparent addressing mode, starting from 0x80000000.
+ * in transparent addressing mode.
*/
- mask = PHYS_OFFSET | (1<<3);
+ mask = PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_PREFETCH;
MSC_WRITE(MSC01_PCI_BAR0, mask);
-
- mask = PHYS_OFFSET;
MSC_WRITE(MSC01_PCI_HEAD4, mask);
+
+ mask &= MSC01_PCI_BAR0_SIZE_MSK;
MSC_WRITE(MSC01_PCI_P2SCMSKL, mask);
MSC_WRITE(MSC01_PCI_P2SCMAPL, mask);
-#endif
+
/* Don't handle target retries indefinitely. */
if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
MSC01_PCI_CFG_MAXRTRY_MSK)
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index c6a6c7afddab..cb675ec6f283 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -14,11 +14,13 @@
*/
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irqchip/mips-gic.h>
+#include <linux/of_irq.h>
#include <linux/kernel_stat.h>
#include <linux/kernel.h>
#include <linux/random.h>
@@ -37,10 +39,6 @@
#include <asm/setup.h>
#include <asm/rtlx.h>
-static void __iomem *_msc01_biu_base;
-
-static DEFINE_RAW_SPINLOCK(mips_irq_lock);
-
static inline int mips_pcibios_iack(void)
{
int irq;
@@ -85,49 +83,6 @@ static inline int mips_pcibios_iack(void)
return irq;
}
-static inline int get_int(void)
-{
- unsigned long flags;
- int irq;
- raw_spin_lock_irqsave(&mips_irq_lock, flags);
-
- irq = mips_pcibios_iack();
-
- /*
- * The only way we can decide if an interrupt is spurious
- * is by checking the 8259 registers. This needs a spinlock
- * on an SMP system, so leave it up to the generic code...
- */
-
- raw_spin_unlock_irqrestore(&mips_irq_lock, flags);
-
- return irq;
-}
-
-static void malta_hw0_irqdispatch(void)
-{
- int irq;
-
- irq = get_int();
- if (irq < 0) {
- /* interrupt has already been cleared */
- return;
- }
-
- do_IRQ(MALTA_INT_BASE + irq);
-
-#ifdef CONFIG_MIPS_VPE_APSP_API_MT
- if (aprp_hook)
- aprp_hook();
-#endif
-}
-
-static irqreturn_t i8259_handler(int irq, void *dev_id)
-{
- malta_hw0_irqdispatch();
- return IRQ_HANDLED;
-}
-
static void corehi_irqdispatch(void)
{
unsigned int intedge, intsteer, pcicmd, pcibadaddr;
@@ -240,12 +195,6 @@ static struct irqaction irq_call = {
};
#endif /* CONFIG_MIPS_MT_SMP */
-static struct irqaction i8259irq = {
- .handler = i8259_handler,
- .name = "XT-PIC cascade",
- .flags = IRQF_NO_THREAD,
-};
-
static struct irqaction corehi_irqaction = {
.handler = corehi_handler,
.name = "CoreHi",
@@ -281,28 +230,10 @@ void __init arch_init_ipiirq(int irq, struct irqaction *action)
void __init arch_init_irq(void)
{
- int corehi_irq, i8259_irq;
-
- init_i8259_irqs();
+ int corehi_irq;
- if (!cpu_has_veic)
- mips_cpu_irq_init();
-
- if (mips_cm_present()) {
- write_gcr_gic_base(GIC_BASE_ADDR | CM_GCR_GIC_BASE_GICEN_MSK);
- gic_present = 1;
- } else {
- if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) {
- _msc01_biu_base = ioremap_nocache(MSC01_BIU_REG_BASE,
- MSC01_BIU_ADDRSPACE_SZ);
- gic_present =
- (__raw_readl(_msc01_biu_base + MSC01_SC_CFG_OFS) &
- MSC01_SC_CFG_GICPRES_MSK) >>
- MSC01_SC_CFG_GICPRES_SHF;
- }
- }
- if (gic_present)
- pr_debug("GIC present\n");
+ i8259_set_poll(mips_pcibios_iack);
+ irqchip_init();
switch (mips_revision_sconid) {
case MIPS_REVISION_SCON_SOCIT:
@@ -330,18 +261,6 @@ void __init arch_init_irq(void)
}
if (gic_present) {
- int i;
-
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, MIPSCPU_INT_GIC,
- MIPS_GIC_IRQ_BASE);
- if (!mips_cm_present()) {
- /* Enable the GIC */
- i = __raw_readl(_msc01_biu_base + MSC01_SC_CFG_OFS);
- __raw_writel(i | (0x1 << MSC01_SC_CFG_GICENA_SHF),
- _msc01_biu_base + MSC01_SC_CFG_OFS);
- pr_debug("GIC Enabled\n");
- }
- i8259_irq = MIPS_GIC_IRQ_BASE + GIC_INT_I8259A;
corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
} else {
#if defined(CONFIG_MIPS_MT_SMP)
@@ -361,33 +280,13 @@ void __init arch_init_irq(void)
arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
#endif
if (cpu_has_veic) {
- set_vi_handler(MSC01E_INT_I8259A,
- malta_hw0_irqdispatch);
set_vi_handler(MSC01E_INT_COREHI,
corehi_irqdispatch);
- i8259_irq = MSC01E_INT_BASE + MSC01E_INT_I8259A;
corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI;
} else {
- i8259_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_I8259A;
corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
}
}
- setup_irq(i8259_irq, &i8259irq);
setup_irq(corehi_irq, &corehi_irqaction);
}
-
-void malta_be_init(void)
-{
- /* Could change CM error mask register. */
-}
-
-int malta_be_handler(struct pt_regs *regs, int is_fixup)
-{
- /* This duplicates the handling in do_be which seems wrong */
- int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
-
- mips_cm_error_report();
-
- return retval;
-}
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index e1dd1c1d3fde..516e1233d771 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -23,14 +23,10 @@
*/
#include <linux/init.h>
#include <linux/serial_8250.h>
-#include <linux/mc146818rtc.h>
#include <linux/module.h>
#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/mips-boards/maltaint.h>
-#include <mtd/mtd-abi.h>
#define SMC_PORT(base, int) \
{ \
@@ -68,80 +64,13 @@ static struct platform_device malta_uart8250_device = {
},
};
-struct resource malta_rtc_resources[] = {
- {
- .start = RTC_PORT(0),
- .end = RTC_PORT(7),
- .flags = IORESOURCE_IO,
- }, {
- .start = RTC_IRQ,
- .end = RTC_IRQ,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device malta_rtc_device = {
- .name = "rtc_cmos",
- .id = -1,
- .resource = malta_rtc_resources,
- .num_resources = ARRAY_SIZE(malta_rtc_resources),
-};
-
-static struct mtd_partition malta_mtd_partitions[] = {
- {
- .name = "YAMON",
- .offset = 0x0,
- .size = 0x100000,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "User FS",
- .offset = 0x100000,
- .size = 0x2e0000
- }, {
- .name = "Board Config",
- .offset = 0x3e0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE
- }
-};
-
-static struct physmap_flash_data malta_flash_data = {
- .width = 4,
- .nr_parts = ARRAY_SIZE(malta_mtd_partitions),
- .parts = malta_mtd_partitions
-};
-
-static struct resource malta_flash_resource = {
- .start = 0x1e000000,
- .end = 0x1e3fffff,
- .flags = IORESOURCE_MEM
-};
-
-static struct platform_device malta_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &malta_flash_data,
- },
- .num_resources = 1,
- .resource = &malta_flash_resource,
-};
-
static struct platform_device *malta_devices[] __initdata = {
&malta_uart8250_device,
- &malta_rtc_device,
- &malta_flash_device,
};
static int __init malta_add_devices(void)
{
- int err;
-
- err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
- if (err)
- return err;
-
- return 0;
+ return platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
}
device_initcall(malta_add_devices);
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index 2fd2cc2c5034..dd6f62ad4417 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -8,38 +8,21 @@
*/
#include <linux/io.h>
#include <linux/pm.h>
+#include <linux/reboot.h>
#include <asm/reboot.h>
#include <asm/mach-malta/malta-pm.h>
-#define SOFTRES_REG 0x1f000500
-#define GORESET 0x42
-
-static void mips_machine_restart(char *command)
-{
- unsigned int __iomem *softres_reg =
- ioremap(SOFTRES_REG, sizeof(unsigned int));
-
- __raw_writel(GORESET, softres_reg);
-}
-
-static void mips_machine_halt(void)
-{
- while (true);
-}
-
static void mips_machine_power_off(void)
{
mips_pm_suspend(PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF);
pr_info("Failed to power down, resetting\n");
- mips_machine_restart(NULL);
+ machine_restart(NULL);
}
static int __init mips_reboot_setup(void)
{
- _machine_restart = mips_machine_restart;
- _machine_halt = mips_machine_halt;
pm_power_off = mips_machine_power_off;
return 0;
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 7e7364b0501e..a01d5debfcaf 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -42,9 +42,6 @@
#define ROCIT_CONFIG_GEN0 0x1f403000
#define ROCIT_CONFIG_GEN0_PCI_IOCU BIT(7)
-extern void malta_be_init(void);
-extern int malta_be_handler(struct pt_regs *regs, int is_fixup);
-
static struct resource standard_io_resources[] = {
{
.name = "dma1",
@@ -154,12 +151,12 @@ static void __init plat_setup_iocoherency(void)
* coherency instead.
*/
if (plat_enable_iocoherency()) {
- if (coherentio == 0)
+ if (coherentio == IO_COHERENCE_DISABLED)
pr_info("Hardware DMA cache coherency disabled\n");
else
pr_info("Hardware DMA cache coherency enabled\n");
} else {
- if (coherentio == 1)
+ if (coherentio == IO_COHERENCE_ENABLED)
pr_info("Hardware DMA cache coherency unsupported, but enabled from command line!\n");
else
pr_info("Software DMA cache coherency enabled\n");
@@ -301,7 +298,4 @@ void __init plat_mem_setup(void)
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
screen_info_setup();
#endif
-
- board_be_init = malta_be_init;
- board_be_handler = malta_be_handler;
}
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
deleted file mode 100644
index 7a584e0bf933..000000000000
--- a/arch/mips/mti-sead3/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-#
-# Copyright (C) 2008 Wind River Systems, Inc.
-# written by Ralf Baechle <ralf@linux-mips.org>
-#
-# Copyright (C) 2012 MIPS Technoligies, Inc. All rights reserved.
-# Steven J. Hill <sjhill@mips.com>
-#
-obj-y := sead3-lcd.o sead3-display.o sead3-init.o \
- sead3-int.o sead3-platform.o sead3-reset.o \
- sead3-setup.o sead3-time.o
-
-obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
diff --git a/arch/mips/mti-sead3/Platform b/arch/mips/mti-sead3/Platform
deleted file mode 100644
index 387092427145..000000000000
--- a/arch/mips/mti-sead3/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# MIPS SEAD-3 board
-#
-platform-$(CONFIG_MIPS_SEAD3) += mti-sead3/
-cflags-$(CONFIG_MIPS_SEAD3) += -I$(srctree)/arch/mips/include/asm/mach-sead3
-load-$(CONFIG_MIPS_SEAD3) += 0xffffffff80100000
-all-$(CONFIG_MIPS_SEAD3) := $(COMPRESSION_FNAME).srec
diff --git a/arch/mips/mti-sead3/sead3-console.c b/arch/mips/mti-sead3/sead3-console.c
deleted file mode 100644
index 031f47d69770..000000000000
--- a/arch/mips/mti-sead3/sead3-console.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/serial_reg.h>
-#include <linux/io.h>
-
-#define SEAD_UART1_REGS_BASE 0xbf000800 /* ttyS1 = DB9 port */
-#define SEAD_UART0_REGS_BASE 0xbf000900 /* ttyS0 = USB port */
-#define PORT(base_addr, offset) ((unsigned int __iomem *)(base_addr+(offset)*4))
-
-static char console_port = 1;
-
-static inline unsigned int serial_in(int offset, unsigned int base_addr)
-{
- return __raw_readl(PORT(base_addr, offset)) & 0xff;
-}
-
-static inline void serial_out(int offset, int value, unsigned int base_addr)
-{
- __raw_writel(value, PORT(base_addr, offset));
-}
-
-void __init fw_init_early_console(char port)
-{
- console_port = port;
-}
-
-int prom_putchar(char c)
-{
- unsigned int base_addr;
-
- base_addr = console_port ? SEAD_UART1_REGS_BASE : SEAD_UART0_REGS_BASE;
-
- while ((serial_in(UART_LSR, base_addr) & UART_LSR_THRE) == 0)
- ;
-
- serial_out(UART_TX, c, base_addr);
-
- return 1;
-}
diff --git a/arch/mips/mti-sead3/sead3-display.c b/arch/mips/mti-sead3/sead3-display.c
deleted file mode 100644
index 94875991907b..000000000000
--- a/arch/mips/mti-sead3/sead3-display.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <asm/mips-boards/generic.h>
-
-static unsigned int display_count;
-static unsigned int max_display_count;
-
-#define LCD_DISPLAY_POS_BASE 0x1f000400
-#define DISPLAY_LCDINSTRUCTION (0*2)
-#define DISPLAY_LCDDATA (1*2)
-#define DISPLAY_CPLDSTATUS (2*2)
-#define DISPLAY_CPLDDATA (3*2)
-#define LCD_SETDDRAM 0x80
-#define LCD_IR_BF 0x80
-
-const char display_string[] = " LINUX ON SEAD3 ";
-
-static void scroll_display_message(unsigned long data);
-static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0);
-
-static void lcd_wait(unsigned int __iomem *display)
-{
- /* Wait for CPLD state machine to become idle. */
- do { } while (__raw_readl(display + DISPLAY_CPLDSTATUS) & 1);
-
- do {
- __raw_readl(display + DISPLAY_LCDINSTRUCTION);
-
- /* Wait for CPLD state machine to become idle. */
- do { } while (__raw_readl(display + DISPLAY_CPLDSTATUS) & 1);
- } while (__raw_readl(display + DISPLAY_CPLDDATA) & LCD_IR_BF);
-}
-
-void mips_display_message(const char *str)
-{
- static unsigned int __iomem *display;
- char ch;
- int i;
-
- if (unlikely(display == NULL))
- display = ioremap_nocache(LCD_DISPLAY_POS_BASE,
- (8 * sizeof(int)));
-
- for (i = 0; i < 16; i++) {
- if (*str)
- ch = *str++;
- else
- ch = ' ';
- lcd_wait(display);
- __raw_writel((LCD_SETDDRAM | i),
- (display + DISPLAY_LCDINSTRUCTION));
- lcd_wait(display);
- __raw_writel(ch, display + DISPLAY_LCDDATA);
- }
-}
-
-static void scroll_display_message(unsigned long data)
-{
- mips_display_message(&display_string[display_count++]);
- if (display_count == max_display_count)
- display_count = 0;
- mod_timer(&mips_scroll_timer, jiffies + HZ);
-}
-
-void mips_scroll_message(void)
-{
- del_timer_sync(&mips_scroll_timer);
- max_display_count = strlen(display_string) + 1 - 16;
- mod_timer(&mips_scroll_timer, jiffies + 1);
-}
diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c
deleted file mode 100644
index 3572ea30173e..000000000000
--- a/arch/mips/mti-sead3/sead3-init.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/fw/fw.h>
-
-extern char except_vec_nmi;
-extern char except_vec_ejtag_debug;
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static void __init console_config(void)
-{
- char console_string[40];
- int baud = 0;
- char parity = '\0', bits = '\0', flow = '\0';
- char *s;
-
- if ((strstr(fw_getcmdline(), "console=")) == NULL) {
- s = fw_getenv("modetty0");
- if (s) {
- while (*s >= '0' && *s <= '9')
- baud = baud*10 + *s++ - '0';
- if (*s == ',')
- s++;
- if (*s)
- parity = *s++;
- if (*s == ',')
- s++;
- if (*s)
- bits = *s++;
- if (*s == ',')
- s++;
- if (*s == 'h')
- flow = 'r';
- }
- if (baud == 0)
- baud = 38400;
- if (parity != 'n' && parity != 'o' && parity != 'e')
- parity = 'n';
- if (bits != '7' && bits != '8')
- bits = '8';
- if (flow == '\0')
- flow = 'r';
- sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
- parity, bits, flow);
- strcat(fw_getcmdline(), console_string);
- }
-}
-#endif
-
-static void __init mips_nmi_setup(void)
-{
- void *base;
-
- base = cpu_has_veic ?
- (void *)(CAC_BASE + 0xa80) :
- (void *)(CAC_BASE + 0x380);
-#ifdef CONFIG_CPU_MICROMIPS
- /*
- * Decrement the exception vector address by one for microMIPS.
- */
- memcpy(base, (&except_vec_nmi - 1), 0x80);
-
- /*
- * This is a hack. We do not know if the boot loader was built with
- * microMIPS instructions or not. If it was not, the NMI exception
- * code at 0x80000a80 will be taken in MIPS32 mode. The hand coded
- * assembly below forces us into microMIPS mode if we are a pure
- * microMIPS kernel. The assembly instructions are:
- *
- * 3C1A8000 lui k0,0x8000
- * 375A0381 ori k0,k0,0x381
- * 03400008 jr k0
- * 00000000 nop
- *
- * The mode switch occurs by jumping to the unaligned exception
- * vector address at 0x80000381 which would have been 0x80000380
- * in MIPS32 mode. The jump to the unaligned address transitions
- * us into microMIPS mode.
- */
- if (!cpu_has_veic) {
- void *base2 = (void *)(CAC_BASE + 0xa80);
- *((unsigned int *)base2) = 0x3c1a8000;
- *((unsigned int *)base2 + 1) = 0x375a0381;
- *((unsigned int *)base2 + 2) = 0x03400008;
- *((unsigned int *)base2 + 3) = 0x00000000;
- flush_icache_range((unsigned long)base2,
- (unsigned long)base2 + 0x10);
- }
-#else
- memcpy(base, &except_vec_nmi, 0x80);
-#endif
- flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-static void __init mips_ejtag_setup(void)
-{
- void *base;
-
- base = cpu_has_veic ?
- (void *)(CAC_BASE + 0xa00) :
- (void *)(CAC_BASE + 0x300);
-#ifdef CONFIG_CPU_MICROMIPS
- /* Deja vu... */
- memcpy(base, (&except_vec_ejtag_debug - 1), 0x80);
- if (!cpu_has_veic) {
- void *base2 = (void *)(CAC_BASE + 0xa00);
- *((unsigned int *)base2) = 0x3c1a8000;
- *((unsigned int *)base2 + 1) = 0x375a0301;
- *((unsigned int *)base2 + 2) = 0x03400008;
- *((unsigned int *)base2 + 3) = 0x00000000;
- flush_icache_range((unsigned long)base2,
- (unsigned long)base2 + 0x10);
- }
-#else
- memcpy(base, &except_vec_ejtag_debug, 0x80);
-#endif
- flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-void __init prom_init(void)
-{
- board_nmi_handler_setup = mips_nmi_setup;
- board_ejtag_handler_setup = mips_ejtag_setup;
-
- fw_init_cmdline();
-#ifdef CONFIG_EARLY_PRINTK
- if ((strstr(fw_getcmdline(), "console=ttyS0")) != NULL)
- fw_init_early_console(0);
- else if ((strstr(fw_getcmdline(), "console=ttyS1")) != NULL)
- fw_init_early_console(1);
-#endif
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- if ((strstr(fw_getcmdline(), "console=")) == NULL)
- strcat(fw_getcmdline(), " console=ttyS0,38400n8r");
- console_config();
-#endif
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
deleted file mode 100644
index e31e17f81eef..000000000000
--- a/arch/mips/mti-sead3/sead3-int.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mips-gic.h>
-#include <linux/io.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/setup.h>
-
-#include <asm/mips-boards/sead3int.h>
-
-#define SEAD_CONFIG_GIC_PRESENT_SHF 1
-#define SEAD_CONFIG_GIC_PRESENT_MSK (1 << SEAD_CONFIG_GIC_PRESENT_SHF)
-#define SEAD_CONFIG_BASE 0x1b100110
-#define SEAD_CONFIG_SIZE 4
-
-static void __iomem *sead3_config_reg;
-
-void __init arch_init_irq(void)
-{
- if (!cpu_has_veic)
- mips_cpu_irq_init();
-
- sead3_config_reg = ioremap_nocache(SEAD_CONFIG_BASE, SEAD_CONFIG_SIZE);
- gic_present = (__raw_readl(sead3_config_reg) &
- SEAD_CONFIG_GIC_PRESENT_MSK) >>
- SEAD_CONFIG_GIC_PRESENT_SHF;
- pr_info("GIC: %spresent\n", (gic_present) ? "" : "not ");
- pr_info("EIC: %s\n",
- (current_cpu_data.options & MIPS_CPU_VEIC) ? "on" : "off");
-
- if (gic_present)
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, CPU_INT_GIC,
- MIPS_GIC_IRQ_BASE);
-}
-
diff --git a/arch/mips/mti-sead3/sead3-lcd.c b/arch/mips/mti-sead3/sead3-lcd.c
deleted file mode 100644
index 10b10ed21f77..000000000000
--- a/arch/mips/mti-sead3/sead3-lcd.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-static struct resource __initdata sead3_lcd_resource = {
- .start = 0x1f000400,
- .end = 0x1f00041f,
- .flags = IORESOURCE_MEM,
-};
-
-static __init int sead3_lcd_add(void)
-{
- struct platform_device *pdev;
- int retval;
-
- /* SEAD-3 and Cobalt platforms use same display type. */
- pdev = platform_device_alloc("cobalt-lcd", -1);
- if (!pdev)
- return -ENOMEM;
-
- retval = platform_device_add_resources(pdev, &sead3_lcd_resource, 1);
- if (retval)
- goto err_free_device;
-
- retval = platform_device_add(pdev);
- if (retval)
- goto err_free_device;
-
- return 0;
-
-err_free_device:
- platform_device_put(pdev);
-
- return retval;
-}
-
-device_initcall(sead3_lcd_add);
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
deleted file mode 100644
index 73b73efbfb05..000000000000
--- a/arch/mips/mti-sead3/sead3-platform.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mips-gic.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mips-boards/sead3int.h>
-
-#define UART(base) \
-{ \
- .mapbase = base, \
- .irq = -1, \
- .uartclk = 14745600, \
- .iotype = UPIO_MEM32, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
- .regshift = 2, \
-}
-
-static struct plat_serial8250_port uart8250_data[] = {
- UART(0x1f000900), /* ttyS0 = USB */
- UART(0x1f000800), /* ttyS1 = RS232 */
- { },
-};
-
-static struct platform_device uart8250_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM2,
- .dev = {
- .platform_data = uart8250_data,
- },
-};
-
-static struct smsc911x_platform_config sead3_smsc911x_data = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource sead3_net_resources[] = {
- {
- .start = 0x1f010000,
- .end = 0x1f01ffff,
- .flags = IORESOURCE_MEM
- }, {
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct platform_device sead3_net_device = {
- .name = "smsc911x",
- .id = 0,
- .dev = {
- .platform_data = &sead3_smsc911x_data,
- },
- .num_resources = ARRAY_SIZE(sead3_net_resources),
- .resource = sead3_net_resources
-};
-
-static struct mtd_partition sead3_mtd_partitions[] = {
- {
- .name = "User FS",
- .offset = 0x00000000,
- .size = 0x01fc0000,
- }, {
- .name = "Board Config",
- .offset = 0x01fc0000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE
- },
-};
-
-static struct physmap_flash_data sead3_flash_data = {
- .width = 4,
- .nr_parts = ARRAY_SIZE(sead3_mtd_partitions),
- .parts = sead3_mtd_partitions
-};
-
-static struct resource sead3_flash_resource = {
- .start = 0x1c000000,
- .end = 0x1dffffff,
- .flags = IORESOURCE_MEM
-};
-
-static struct platform_device sead3_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &sead3_flash_data,
- },
- .num_resources = 1,
- .resource = &sead3_flash_resource,
-};
-
-#define LEDFLAGS(bits, shift) \
- ((bits << 8) | (shift << 8))
-
-#define LEDBITS(id, shift, bits) \
- .name = id #shift, \
- .flags = LEDFLAGS(bits, shift)
-
-static struct led_info led_data_info[] = {
- { LEDBITS("bit", 0, 1) },
- { LEDBITS("bit", 1, 1) },
- { LEDBITS("bit", 2, 1) },
- { LEDBITS("bit", 3, 1) },
- { LEDBITS("bit", 4, 1) },
- { LEDBITS("bit", 5, 1) },
- { LEDBITS("bit", 6, 1) },
- { LEDBITS("bit", 7, 1) },
- { LEDBITS("all", 0, 8) },
-};
-
-static struct led_platform_data led_data = {
- .num_leds = ARRAY_SIZE(led_data_info),
- .leds = led_data_info
-};
-
-static struct resource pled_resources[] = {
- {
- .start = 0x1f000210,
- .end = 0x1f000217,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct platform_device pled_device = {
- .name = "sead3::pled",
- .id = 0,
- .dev = {
- .platform_data = &led_data,
- },
- .num_resources = ARRAY_SIZE(pled_resources),
- .resource = pled_resources
-};
-
-
-static struct resource fled_resources[] = {
- {
- .start = 0x1f000218,
- .end = 0x1f00021f,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct platform_device fled_device = {
- .name = "sead3::fled",
- .id = 0,
- .dev = {
- .platform_data = &led_data,
- },
- .num_resources = ARRAY_SIZE(fled_resources),
- .resource = fled_resources
-};
-
-static struct platform_device sead3_led_device = {
- .name = "sead3-led",
- .id = -1,
-};
-
-static struct resource ehci_resources[] = {
- {
- .start = 0x1b200000,
- .end = 0x1b200fff,
- .flags = IORESOURCE_MEM
- }, {
- .flags = IORESOURCE_IRQ
- }
-};
-
-static u64 sead3_usbdev_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ehci_device = {
- .name = "sead3-ehci",
- .id = 0,
- .dev = {
- .dma_mask = &sead3_usbdev_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32)
- },
- .num_resources = ARRAY_SIZE(ehci_resources),
- .resource = ehci_resources
-};
-
-static struct platform_device *sead3_platform_devices[] __initdata = {
- &uart8250_device,
- &sead3_flash,
- &pled_device,
- &fled_device,
- &sead3_led_device,
- &ehci_device,
- &sead3_net_device,
-};
-
-static int __init sead3_platforms_device_init(void)
-{
- if (gic_present) {
- uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0;
- uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1;
- ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
- sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
- } else {
- uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0;
- uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1;
- ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
- sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
- }
-
- return platform_add_devices(sead3_platform_devices,
- ARRAY_SIZE(sead3_platform_devices));
-}
-
-device_initcall(sead3_platforms_device_init);
diff --git a/arch/mips/mti-sead3/sead3-reset.c b/arch/mips/mti-sead3/sead3-reset.c
deleted file mode 100644
index e6fb24414a70..000000000000
--- a/arch/mips/mti-sead3/sead3-reset.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/io.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-
-#define SOFTRES_REG 0x1f000050
-#define GORESET 0x4d
-
-static void mips_machine_restart(char *command)
-{
- unsigned int __iomem *softres_reg =
- ioremap(SOFTRES_REG, sizeof(unsigned int));
-
- __raw_writel(GORESET, softres_reg);
-}
-
-static void mips_machine_halt(void)
-{
- unsigned int __iomem *softres_reg =
- ioremap(SOFTRES_REG, sizeof(unsigned int));
-
- __raw_writel(GORESET, softres_reg);
-}
-
-static int __init mips_reboot_setup(void)
-{
- _machine_restart = mips_machine_restart;
- _machine_halt = mips_machine_halt;
- pm_power_off = mips_machine_halt;
-
- return 0;
-}
-arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
deleted file mode 100644
index edfcaf06680d..000000000000
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/init.h>
-#include <linux/libfdt.h>
-#include <linux/of_fdt.h>
-
-#include <asm/prom.h>
-#include <asm/fw/fw.h>
-
-#include <asm/mips-boards/generic.h>
-
-const char *get_system_type(void)
-{
- return "MIPS SEAD3";
-}
-
-static uint32_t get_memsize_from_cmdline(void)
-{
- int memsize = 0;
- char *p = arcs_cmdline;
- char *s = "memsize=";
-
- p = strstr(p, s);
- if (p) {
- p += strlen(s);
- memsize = memparse(p, NULL);
- }
-
- return memsize;
-}
-
-static uint32_t get_memsize_from_env(void)
-{
- int memsize = 0;
- char *p;
-
- p = fw_getenv("memsize");
- if (p)
- memsize = memparse(p, NULL);
-
- return memsize;
-}
-
-static uint32_t get_memsize(void)
-{
- uint32_t memsize;
-
- memsize = get_memsize_from_cmdline();
- if (memsize)
- return memsize;
-
- return get_memsize_from_env();
-}
-
-static void __init parse_memsize_param(void)
-{
- int offset;
- const uint64_t *prop_value;
- int prop_len;
- uint32_t memsize = get_memsize();
-
- if (!memsize)
- return;
-
- offset = fdt_path_offset(__dtb_start, "/memory");
- if (offset > 0) {
- uint64_t new_value;
- /*
- * reg contains 2 32-bits BE values, offset and size. We just
- * want to replace the size value without affecting the offset
- */
- prop_value = fdt_getprop(__dtb_start, offset, "reg", &prop_len);
- new_value = be64_to_cpu(*prop_value);
- new_value = (new_value & ~0xffffffffllu) | memsize;
- fdt_setprop_inplace_u64(__dtb_start, offset, "reg", new_value);
- }
-}
-
-void __init *plat_get_fdt(void)
-{
- return (void *)__dtb_start;
-}
-
-void __init plat_mem_setup(void)
-{
- /* allow command line/bootloader env to override memory size in DT */
- parse_memsize_param();
-
- /*
- * Load the builtin devicetree. This causes the chosen node to be
- * parsed resulting in our memory appearing
- */
- __dt_setup_arch(__dtb_start);
-}
-
-void __init device_tree_init(void)
-{
- if (!initial_boot_params)
- return;
-
- unflatten_and_copy_device_tree();
-}
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
deleted file mode 100644
index a120b7a5a8fe..000000000000
--- a/arch/mips/mti-sead3/sead3-time.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irqchip/mips-gic.h>
-
-#include <asm/cpu.h>
-#include <asm/setup.h>
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-
-static void __iomem *status_reg = (void __iomem *)0xbf000410;
-
-/*
- * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect.
- */
-static unsigned int __init estimate_cpu_frequency(void)
-{
- unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
- unsigned int tick = 0;
- unsigned int freq;
- unsigned int orig;
- unsigned long flags;
-
- local_irq_save(flags);
-
- orig = readl(status_reg) & 0x2; /* get original sample */
- /* wait for transition */
- while ((readl(status_reg) & 0x2) == orig)
- ;
- orig = orig ^ 0x2; /* flip the bit */
-
- write_c0_count(0);
-
- /* wait 1 second (the sampling clock transitions every 10ms) */
- while (tick < 100) {
- /* wait for transition */
- while ((readl(status_reg) & 0x2) == orig)
- ;
- orig = orig ^ 0x2; /* flip the bit */
- tick++;
- }
-
- freq = read_c0_count();
-
- local_irq_restore(flags);
-
- mips_hpt_frequency = freq;
-
- /* Adjust for processor */
- if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
- (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
- freq *= 2;
-
- freq += 5000; /* rounding */
- freq -= freq%10000;
-
- return freq ;
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
- ts->tv_sec = 0;
- ts->tv_nsec = 0;
-}
-
-int get_c0_perfcount_int(void)
-{
- if (gic_present)
- return gic_get_c0_perfcount_int();
- if (cp0_perfcount_irq >= 0)
- return MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
- return -1;
-}
-EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
-
-unsigned int get_c0_compare_int(void)
-{
- if (gic_present)
- return gic_get_c0_compare_int();
- return MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-}
-
-void __init plat_time_init(void)
-{
- unsigned int est_freq;
-
- est_freq = estimate_cpu_frequency();
-
- pr_debug("CPU frequency %d.%02d MHz\n", (est_freq / 1000000),
- (est_freq % 1000000) * 100 / 1000000);
-
- mips_scroll_message();
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 139ad1d7ab5e..4b821481dd44 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -3,6 +3,8 @@
#
obj-y += pci.o
+obj-$(CONFIG_PCI_DRIVERS_LEGACY)+= pci-legacy.o
+obj-$(CONFIG_PCI_DRIVERS_GENERIC)+= pci-generic.o
#
# PCI bus host bridge specific code
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index c8994c156e2d..e99ca7702d8a 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -429,7 +429,8 @@ static int alchemy_pci_probe(struct platform_device *pdev)
/* Au1500 revisions older than AD have borked coherent PCI */
if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
- (read_c0_prid() < 0x01030202) && !coherentio) {
+ (read_c0_prid() < 0x01030202) &&
+ (coherentio == IO_COHERENCE_DISABLED)) {
val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
val |= PCI_CONFIG_NC;
__raw_writel(val, ctx->regs + PCI_REG_CONFIG);
diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c
index 7db963deec73..bdf87b43633f 100644
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -18,7 +18,7 @@
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach-ath79/ar71xx_regs.h>
diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c
index 2013dad700df..1e23c8d587bd 100644
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -11,7 +11,7 @@
#include <linux/irq.h>
#include <linux/pci.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
new file mode 100644
index 000000000000..dce304dc3d62
--- /dev/null
+++ b/arch/mips/pci/pci-generic.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * pcibios_align_resource taken from arch/arm/kernel/bios32.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ struct pci_dev *dev = data;
+ resource_size_t start = res->start;
+ struct pci_host_bridge *host_bridge;
+
+ if (res->flags & IORESOURCE_IO && start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+
+ start = (start + align - 1) & ~(align - 1);
+
+ host_bridge = pci_find_host_bridge(dev->bus);
+
+ if (host_bridge->align_resource)
+ return host_bridge->align_resource(dev, res,
+ start, size, align);
+
+ return start;
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+ pci_read_bridge_bases(bus);
+}
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index b9deab17ccf2..f18f887f481d 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -13,7 +13,6 @@
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
-#include <linux/module.h>
#include <linux/clk.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
@@ -234,7 +233,6 @@ static const struct of_device_id ltq_pci_match[] = {
{ .compatible = "lantiq,pci-xway" },
{},
};
-MODULE_DEVICE_TABLE(of, ltq_pci_match);
static struct platform_driver ltq_pci_driver = {
.probe = ltq_pci_probe,
diff --git a/arch/mips/pci/pci-legacy.c b/arch/mips/pci/pci-legacy.c
new file mode 100644
index 000000000000..014649be158d
--- /dev/null
+++ b/arch/mips/pci/pci-legacy.c
@@ -0,0 +1,302 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2003, 04, 11 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2011 Wind River Systems,
+ * written by Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/of_address.h>
+
+#include <asm/cpu-info.h>
+
+/*
+ * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
+ * assignments.
+ */
+
+/*
+ * The PCI controller list.
+ */
+static LIST_HEAD(controllers);
+
+static int pci_initialized;
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ struct pci_dev *dev = data;
+ struct pci_controller *hose = dev->sysdata;
+ resource_size_t start = res->start;
+
+ if (res->flags & IORESOURCE_IO) {
+ /* Make sure we start at our min on all hoses */
+ if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
+ start = PCIBIOS_MIN_IO + hose->io_resource->start;
+
+ /*
+ * Put everything into 0x00-0xff region modulo 0x400
+ */
+ if (start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+ } else if (res->flags & IORESOURCE_MEM) {
+ /* Make sure we start at our min on all hoses */
+ if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
+ start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
+ }
+
+ return start;
+}
+
+static void pcibios_scanbus(struct pci_controller *hose)
+{
+ static int next_busno;
+ static int need_domain_info;
+ LIST_HEAD(resources);
+ struct pci_bus *bus;
+
+ if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
+ next_busno = (*hose->get_busno)();
+
+ pci_add_resource_offset(&resources,
+ hose->mem_resource, hose->mem_offset);
+ pci_add_resource_offset(&resources,
+ hose->io_resource, hose->io_offset);
+ pci_add_resource_offset(&resources,
+ hose->busn_resource, hose->busn_offset);
+ bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
+ &resources);
+ hose->bus = bus;
+
+ need_domain_info = need_domain_info || pci_domain_nr(bus);
+ set_pci_need_domain_info(hose, need_domain_info);
+
+ if (!bus) {
+ pci_free_resource_list(&resources);
+ return;
+ }
+
+ next_busno = bus->busn_res.end + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
+
+ /*
+ * We insert PCI resources into the iomem_resource and
+ * ioport_resource trees in either pci_bus_claim_resources()
+ * or pci_bus_assign_resources().
+ */
+ if (pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_claim_resources(bus);
+ } else {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ }
+ pci_bus_add_devices(bus);
+}
+
+#ifdef CONFIG_OF
+void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
+{
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+
+ pr_info("PCI host bridge %s ranges:\n", node->full_name);
+ hose->of_node = node;
+
+ if (of_pci_range_parser_init(&parser, node))
+ return;
+
+ for_each_of_pci_range(&parser, &range) {
+ struct resource *res = NULL;
+
+ switch (range.flags & IORESOURCE_TYPE_BITS) {
+ case IORESOURCE_IO:
+ pr_info(" IO 0x%016llx..0x%016llx\n",
+ range.cpu_addr,
+ range.cpu_addr + range.size - 1);
+ hose->io_map_base =
+ (unsigned long)ioremap(range.cpu_addr,
+ range.size);
+ res = hose->io_resource;
+ break;
+ case IORESOURCE_MEM:
+ pr_info(" MEM 0x%016llx..0x%016llx\n",
+ range.cpu_addr,
+ range.cpu_addr + range.size - 1);
+ res = hose->mem_resource;
+ break;
+ }
+ if (res != NULL)
+ of_pci_range_to_resource(&range, node, res);
+ }
+}
+
+struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+ struct pci_controller *hose = bus->sysdata;
+
+ return of_node_get(hose->of_node);
+}
+#endif
+
+static DEFINE_MUTEX(pci_scan_mutex);
+
+void register_pci_controller(struct pci_controller *hose)
+{
+ struct resource *parent;
+
+ parent = hose->mem_resource->parent;
+ if (!parent)
+ parent = &iomem_resource;
+
+ if (request_resource(parent, hose->mem_resource) < 0)
+ goto out;
+
+ parent = hose->io_resource->parent;
+ if (!parent)
+ parent = &ioport_resource;
+
+ if (request_resource(parent, hose->io_resource) < 0) {
+ release_resource(hose->mem_resource);
+ goto out;
+ }
+
+ INIT_LIST_HEAD(&hose->list);
+ list_add(&hose->list, &controllers);
+
+ /*
+ * Do not panic here but later - this might happen before console init.
+ */
+ if (!hose->io_map_base) {
+ printk(KERN_WARNING
+ "registering PCI controller with io_map_base unset\n");
+ }
+
+ /*
+ * Scan the bus if it is register after the PCI subsystem
+ * initialization.
+ */
+ if (pci_initialized) {
+ mutex_lock(&pci_scan_mutex);
+ pcibios_scanbus(hose);
+ mutex_unlock(&pci_scan_mutex);
+ }
+
+ return;
+
+out:
+ printk(KERN_WARNING
+ "Skipping PCI bus scan due to resource conflict\n");
+}
+
+static int __init pcibios_init(void)
+{
+ struct pci_controller *hose;
+
+ /* Scan all of the recorded PCI controllers. */
+ list_for_each_entry(hose, &controllers, list)
+ pcibios_scanbus(hose);
+
+ pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
+
+ pci_initialized = 1;
+
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+static int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1<<idx)))
+ continue;
+
+ r = &dev->resource[idx];
+ if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ continue;
+ if ((idx == PCI_ROM_RESOURCE) &&
+ (!(r->flags & IORESOURCE_ROM_ENABLE)))
+ continue;
+ if (!r->start && r->end) {
+ printk(KERN_ERR "PCI: Device %s not available "
+ "because of resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ if (cmd != old_cmd) {
+ printk("PCI: Enabling device %s (%04x -> %04x)\n",
+ pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ int err;
+
+ if ((err = pcibios_enable_resources(dev, mask)) < 0)
+ return err;
+
+ return pcibios_plat_dev_init(dev);
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev = bus->self;
+
+ if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
+ (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pci_read_bridge_bases(bus);
+ }
+}
+
+char * (*pcibios_plat_setup)(char *str) __initdata;
+
+char *__init pcibios_setup(char *str)
+{
+ if (pcibios_plat_setup)
+ return pcibios_plat_setup(str);
+ return str;
+}
diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c
index 6ce816201699..628c5132b3d8 100644
--- a/arch/mips/pci/pci-mt7620.c
+++ b/arch/mips/pci/pci-mt7620.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
@@ -407,13 +406,11 @@ static const struct of_device_id mt7620_pci_ids[] = {
{ .compatible = "mediatek,mt7620-pci" },
{},
};
-MODULE_DEVICE_TABLE(of, mt7620_pci_ids);
static struct platform_driver mt7620_pci_driver = {
.probe = mt7620_pci_probe,
.driver = {
.name = "mt7620-pci",
- .owner = THIS_MODULE,
.of_match_table = of_match_ptr(mt7620_pci_ids),
},
};
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index c258cd406fbb..308d051fc45c 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -204,6 +204,8 @@ const char *octeon_get_pci_interrupts(void)
* Interrupt Number (INTA# = 0, INTB# = 1, INTC# = 2, and
* INTD# = 3)
*/
+ if (of_machine_is_compatible("dlink,dsr-500n"))
+ return "CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC";
switch (octeon_bootinfo->board_type) {
case CVMX_BOARD_TYPE_NAO38:
/* This is really the NAC38 */
diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
index f2a1050168d9..d6360fe73d05 100644
--- a/arch/mips/pci/pci-rt2880.c
+++ b/arch/mips/pci/pci-rt2880.c
@@ -16,7 +16,6 @@
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
@@ -260,7 +259,6 @@ static const struct of_device_id rt288x_pci_match[] = {
{ .compatible = "ralink,rt288x-pci" },
{},
};
-MODULE_DEVICE_TABLE(of, rt288x_pci_match);
static struct platform_driver rt288x_pci_driver = {
.probe = rt288x_pci_probe,
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index 53a42b07008b..3520e9b414e7 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -16,7 +16,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
@@ -580,7 +579,6 @@ static const struct of_device_id rt3883_pci_ids[] = {
{ .compatible = "ralink,rt3883-pci" },
{},
};
-MODULE_DEVICE_TABLE(of, rt3883_pci_ids);
static struct platform_driver rt3883_pci_driver = {
.probe = rt3883_pci_probe,
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index b4c02f29663e..f6325fa657fb 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -20,208 +20,13 @@
#include <asm/cpu-info.h>
-/*
- * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
- * assignments.
- */
-
-/*
- * The PCI controller list.
- */
-
-static struct pci_controller *hose_head, **hose_tail = &hose_head;
-
unsigned long PCIBIOS_MIN_IO;
-unsigned long PCIBIOS_MIN_MEM;
-
-static int pci_initialized;
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-resource_size_t
-pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- struct pci_dev *dev = data;
- struct pci_controller *hose = dev->sysdata;
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- /* Make sure we start at our min on all hoses */
- if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
- start = PCIBIOS_MIN_IO + hose->io_resource->start;
-
- /*
- * Put everything into 0x00-0xff region modulo 0x400
- */
- if (start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
- } else if (res->flags & IORESOURCE_MEM) {
- /* Make sure we start at our min on all hoses */
- if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
- start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
- }
-
- return start;
-}
-
-static void pcibios_scanbus(struct pci_controller *hose)
-{
- static int next_busno;
- static int need_domain_info;
- LIST_HEAD(resources);
- struct pci_bus *bus;
-
- if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
- next_busno = (*hose->get_busno)();
-
- pci_add_resource_offset(&resources,
- hose->mem_resource, hose->mem_offset);
- pci_add_resource_offset(&resources,
- hose->io_resource, hose->io_offset);
- pci_add_resource_offset(&resources,
- hose->busn_resource, hose->busn_offset);
- bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
- &resources);
- hose->bus = bus;
-
- need_domain_info = need_domain_info || hose->index;
- hose->need_domain_info = need_domain_info;
-
- if (!bus) {
- pci_free_resource_list(&resources);
- return;
- }
-
- next_busno = bus->busn_res.end + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
- }
-
- /*
- * We insert PCI resources into the iomem_resource and
- * ioport_resource trees in either pci_bus_claim_resources()
- * or pci_bus_assign_resources().
- */
- if (pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_claim_resources(bus);
- } else {
- pci_bus_size_bridges(bus);
- pci_bus_assign_resources(bus);
- }
- pci_bus_add_devices(bus);
-}
-
-#ifdef CONFIG_OF
-void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
-{
- struct of_pci_range range;
- struct of_pci_range_parser parser;
-
- pr_info("PCI host bridge %s ranges:\n", node->full_name);
- hose->of_node = node;
-
- if (of_pci_range_parser_init(&parser, node))
- return;
-
- for_each_of_pci_range(&parser, &range) {
- struct resource *res = NULL;
-
- switch (range.flags & IORESOURCE_TYPE_BITS) {
- case IORESOURCE_IO:
- pr_info(" IO 0x%016llx..0x%016llx\n",
- range.cpu_addr,
- range.cpu_addr + range.size - 1);
- hose->io_map_base =
- (unsigned long)ioremap(range.cpu_addr,
- range.size);
- res = hose->io_resource;
- break;
- case IORESOURCE_MEM:
- pr_info(" MEM 0x%016llx..0x%016llx\n",
- range.cpu_addr,
- range.cpu_addr + range.size - 1);
- res = hose->mem_resource;
- break;
- }
- if (res != NULL)
- of_pci_range_to_resource(&range, node, res);
- }
-}
-
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
- struct pci_controller *hose = bus->sysdata;
-
- return of_node_get(hose->of_node);
-}
-#endif
-
-static DEFINE_MUTEX(pci_scan_mutex);
-
-void register_pci_controller(struct pci_controller *hose)
-{
- struct resource *parent;
-
- parent = hose->mem_resource->parent;
- if (!parent)
- parent = &iomem_resource;
-
- if (request_resource(parent, hose->mem_resource) < 0)
- goto out;
-
- parent = hose->io_resource->parent;
- if (!parent)
- parent = &ioport_resource;
-
- if (request_resource(parent, hose->io_resource) < 0) {
- release_resource(hose->mem_resource);
- goto out;
- }
-
- *hose_tail = hose;
- hose_tail = &hose->next;
-
- /*
- * Do not panic here but later - this might happen before console init.
- */
- if (!hose->io_map_base) {
- printk(KERN_WARNING
- "registering PCI controller with io_map_base unset\n");
- }
-
- /*
- * Scan the bus if it is register after the PCI subsystem
- * initialization.
- */
- if (pci_initialized) {
- mutex_lock(&pci_scan_mutex);
- pcibios_scanbus(hose);
- mutex_unlock(&pci_scan_mutex);
- }
-
- return;
+EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-out:
- printk(KERN_WARNING
- "Skipping PCI bus scan due to resource conflict\n");
-}
+unsigned long PCIBIOS_MIN_MEM;
+EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
-static void __init pcibios_set_cache_line_size(void)
+static int __init pcibios_set_cache_line_size(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
unsigned int lsize;
@@ -239,92 +44,9 @@ static void __init pcibios_set_cache_line_size(void)
pci_dfl_cache_line_size = lsize >> 2;
pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize);
-}
-
-static int __init pcibios_init(void)
-{
- struct pci_controller *hose;
-
- pcibios_set_cache_line_size();
-
- /* Scan all of the recorded PCI controllers. */
- for (hose = hose_head; hose; hose = hose->next)
- pcibios_scanbus(hose);
-
- pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
-
- pci_initialized = 1;
-
- return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-static int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1<<idx)))
- continue;
-
- r = &dev->resource[idx];
- if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
- continue;
- if ((idx == PCI_ROM_RESOURCE) &&
- (!(r->flags & IORESOURCE_ROM_ENABLE)))
- continue;
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available "
- "because of resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (cmd != old_cmd) {
- printk("PCI: Enabling device %s (%04x -> %04x)\n",
- pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
return 0;
}
-
-unsigned int pcibios_assign_all_busses(void)
-{
- return 1;
-}
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- int err;
-
- if ((err = pcibios_enable_resources(dev, mask)) < 0)
- return err;
-
- return pcibios_plat_dev_init(dev);
-}
-
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev = bus->self;
-
- if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
- (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
- pci_read_bridge_bases(bus);
- }
-}
-
-EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
+arch_initcall(pcibios_set_cache_line_size);
void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc, resource_size_t *start,
@@ -359,12 +81,3 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
-
-char * (*pcibios_plat_setup)(char *str) __initdata;
-
-char *__init pcibios_setup(char *str)
-{
- if (pcibios_plat_setup)
- return pcibios_plat_setup(str);
- return str;
-}
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 99f3db4f0a9b..9f672ceb089b 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -11,7 +11,7 @@
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-npei-defs.h>
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index 3cd357737a26..7cf4eb50fc72 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -232,12 +232,8 @@ static struct platform_device *pnx833x_platform_devices[] __initdata = {
static int __init pnx833x_platform_init(void)
{
- int res;
-
- res = platform_add_devices(pnx833x_platform_devices,
- ARRAY_SIZE(pnx833x_platform_devices));
-
- return res;
+ return platform_add_devices(pnx833x_platform_devices,
+ ARRAY_SIZE(pnx833x_platform_devices));
}
arch_initcall(pnx833x_platform_init);
diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
index b0343ff336c5..8077ff39bdea 100644
--- a/arch/mips/ralink/timer.c
+++ b/arch/mips/ralink/timer.c
@@ -1,4 +1,7 @@
/*
+ * Ralink RT2880 timer
+ * Author: John Crispin
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
@@ -6,7 +9,6 @@
* Copyright (C) 2013 John Crispin <john@phrozen.org>
*/
-#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
@@ -152,33 +154,17 @@ static int rt_timer_probe(struct platform_device *pdev)
return 0;
}
-static int rt_timer_remove(struct platform_device *pdev)
-{
- struct rt_timer *rt = platform_get_drvdata(pdev);
-
- rt_timer_disable(rt);
- rt_timer_free(rt);
-
- return 0;
-}
-
static const struct of_device_id rt_timer_match[] = {
{ .compatible = "ralink,rt2880-timer" },
{},
};
-MODULE_DEVICE_TABLE(of, rt_timer_match);
static struct platform_driver rt_timer_driver = {
.probe = rt_timer_probe,
- .remove = rt_timer_remove,
.driver = {
- .name = "rt-timer",
- .of_match_table = rt_timer_match
+ .name = "rt-timer",
+ .of_match_table = rt_timer_match,
+ .suppress_bind_attrs = true,
},
};
-
-module_platform_driver(rt_timer_driver);
-
-MODULE_DESCRIPTION("Ralink RT2880 timer");
-MODULE_AUTHOR("John Crispin <john@phrozen.org");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(rt_timer_driver);
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 8c337d60f790..42923478d45c 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -20,7 +20,7 @@ config MACH_TXX9
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
- select HAVE_CLK
+ select COMMON_CLK
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 1f6bc9a3036c..285d84e5c7b9 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -29,12 +29,8 @@ static int __init
early_read_config_word(struct pci_controller *hose,
int top_bus, int bus, int devfn, int offset, u16 *value)
{
- struct pci_dev fake_dev;
struct pci_bus fake_bus;
- fake_dev.bus = &fake_bus;
- fake_dev.sysdata = hose;
- fake_dev.devfn = devfn;
fake_bus.number = bus;
fake_bus.sysdata = hose;
fake_bus.ops = hose->pci_ops;
@@ -45,7 +41,7 @@ early_read_config_word(struct pci_controller *hose,
else
fake_bus.parent = NULL;
- return pci_read_config_word(&fake_dev, offset, value);
+ return pci_bus_read_config_word(&fake_bus, devfn, offset, value);
}
int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index ada92db92f87..a1d98b5c8fd6 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -15,7 +15,8 @@
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/module.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/platform_device.h>
@@ -83,40 +84,6 @@ int txx9_ccfg_toeon __initdata;
int txx9_ccfg_toeon __initdata = 1;
#endif
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- if (!strcmp(id, "spi-baseclk"))
- return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 2);
- if (!strcmp(id, "imbus_clk"))
- return (struct clk *)((unsigned long)txx9_gbus_clock / 2);
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
#define BOARD_VEC(board) extern struct txx9_board_vec board;
#include <asm/txx9/boards.h>
#undef BOARD_VEC
@@ -560,8 +527,41 @@ void __init plat_time_init(void)
txx9_board_vec->time_init();
}
+static void txx9_clk_init(void)
+{
+ struct clk_hw *hw;
+ int error;
+
+ hw = clk_hw_register_fixed_rate(NULL, "gbus", NULL, 0, txx9_gbus_clock);
+ if (IS_ERR(hw)) {
+ error = PTR_ERR(hw);
+ goto fail;
+ }
+
+ hw = clk_hw_register_fixed_factor(NULL, "imbus", "gbus", 0, 1, 2);
+ error = clk_hw_register_clkdev(hw, "imbus_clk", NULL);
+ if (error)
+ goto fail;
+
+#ifdef CONFIG_CPU_TX49XX
+ if (TX4938_REV_PCODE() == 0x4938) {
+ hw = clk_hw_register_fixed_factor(NULL, "spi", "gbus", 0, 1, 4);
+ error = clk_hw_register_clkdev(hw, "spi-baseclk", NULL);
+ if (error)
+ goto fail;
+ }
+#endif
+
+ return;
+
+fail:
+ pr_err("Failed to register clocks: %d\n", error);
+}
+
static int __init _txx9_arch_init(void)
{
+ txx9_clk_init();
+
if (txx9_board_vec->arch_init)
txx9_board_vec->arch_init();
return 0;
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
index 110e05c3eb8f..d3b83a92cf26 100644
--- a/arch/mips/txx9/generic/setup_tx3927.c
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -92,7 +92,6 @@ void __init tx3927_setup(void)
/* PIO */
__raw_writel(0, &tx3927_pioptr->maskcpu);
__raw_writel(0, &tx3927_pioptr->maskext);
- txx9_gpio_init(TX3927_PIO_REG, 0, 16);
conf = read_c0_conf();
if (conf & TX39_CONF_DCE) {
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index a4664cb6c1e1..8d8011570b1d 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -215,7 +215,6 @@ void __init tx4927_setup(void)
txx9_tmr_init(TX4927_TMR_REG(i) & 0xfffffffffULL);
/* PIO */
- txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
__raw_writel(0, &tx4927_pioptr->maskcpu);
__raw_writel(0, &tx4927_pioptr->maskext);
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index 58cdb2aba5e1..ba265bf1fd06 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -241,7 +241,6 @@ void __init tx4938_setup(void)
txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
/* PIO */
- txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
__raw_writel(0, &tx4938_pioptr->maskcpu);
__raw_writel(0, &tx4938_pioptr->maskext);
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 3206f76f300b..a455166dc6d4 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -142,8 +142,6 @@ static void __init jmr3927_board_init(void)
/* PIO[15:12] connected to LEDs */
__raw_writel(0x0000f000, &tx3927_pioptr->dir);
- gpio_request(11, "dipsw1");
- gpio_request(10, "dipsw2");
jmr3927_pci_setup();
@@ -204,6 +202,14 @@ static void __init jmr3927_device_init(void)
txx9_iocled_init(iocled_base, -1, 8, 1, "green", NULL);
}
+static void __init jmr3927_arch_init(void)
+{
+ txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+ gpio_request(11, "dipsw1");
+ gpio_request(10, "dipsw2");
+}
+
struct txx9_board_vec jmr3927_vec __initdata = {
.system = "Toshiba JMR_TX3927",
.prom_init = jmr3927_prom_init,
@@ -211,6 +217,7 @@ struct txx9_board_vec jmr3927_vec __initdata = {
.irq_setup = jmr3927_irq_setup,
.time_init = jmr3927_time_init,
.device_init = jmr3927_device_init,
+ .arch_init = jmr3927_arch_init,
#ifdef CONFIG_PCI
.pci_map_irq = jmr3927_pci_map_irq,
#endif
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 3c516ef625e5..f5b367e20dff 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -52,6 +52,7 @@
#include <linux/leds.h>
#include <asm/io.h>
#include <asm/reboot.h>
+#include <asm/txx9pio.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#include <asm/txx9/rbtx4927.h>
@@ -151,20 +152,37 @@ static void __init tx4937_pci_setup(void)
}
tx4938_setup_pcierr_irq();
}
+#else
+static inline void tx4927_pci_setup(void) {}
+static inline void tx4937_pci_setup(void) {}
+#endif /* CONFIG_PCI */
+
+static void __init rbtx4927_gpio_init(void)
+{
+ /* TX4927-SIO DTR on (PIO[15]) */
+ gpio_request(15, "sio-dtr");
+ gpio_direction_output(15, 1);
+
+ tx4927_sio_init(0, 0);
+}
static void __init rbtx4927_arch_init(void)
{
+ txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
+
+ rbtx4927_gpio_init();
+
tx4927_pci_setup();
}
static void __init rbtx4937_arch_init(void)
{
+ txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
+
+ rbtx4927_gpio_init();
+
tx4937_pci_setup();
}
-#else
-#define rbtx4927_arch_init NULL
-#define rbtx4937_arch_init NULL
-#endif /* CONFIG_PCI */
static void toshiba_rbtx4927_restart(char *command)
{
@@ -205,12 +223,6 @@ static void __init rbtx4927_mem_setup(void)
#else
set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
#endif
-
- /* TX4927-SIO DTR on (PIO[15]) */
- gpio_request(15, "sio-dtr");
- gpio_direction_output(15, 1);
-
- tx4927_sio_init(0, 0);
}
static void __init rbtx4927_clock_init(void)
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 54de66837103..07939ed6b22f 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -336,6 +336,7 @@ static void __init rbtx4938_mtd_init(void)
static void __init rbtx4938_arch_init(void)
{
+ txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
gpiochip_add_data(&rbtx4938_spi_gpio_chip, NULL);
rbtx4938_pci_setup();
rbtx4938_spi_init();
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index 3b4538ec0102..c3dc12a8b7d9 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -13,8 +13,6 @@ cflags-vdso := $(ccflags-vdso) \
-DDISABLE_BRANCH_PROFILING \
$(call cc-option, -fno-stack-protector)
aflags-vdso := $(ccflags-vdso) \
- $(filter -I%,$(KBUILD_CFLAGS)) \
- $(filter -E%,$(KBUILD_CFLAGS)) \
-D__ASSEMBLY__ -Wa,-gdwarf-2
#
@@ -82,7 +80,7 @@ obj-vdso := $(obj-vdso-y:%.o=$(obj)/%.o)
$(obj-vdso): KBUILD_CFLAGS := $(cflags-vdso) $(native-abi)
$(obj-vdso): KBUILD_AFLAGS := $(aflags-vdso) $(native-abi)
-$(obj)/vdso.lds: KBUILD_CPPFLAGS := $(native-abi)
+$(obj)/vdso.lds: KBUILD_CPPFLAGS := $(ccflags-vdso) $(native-abi)
$(obj)/vdso.so.dbg.raw: $(obj)/vdso.lds $(obj-vdso) FORCE
$(call if_changed,vdsold)
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index c07e725ea93d..10e1b9eee10e 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -119,4 +119,13 @@ config CFAG12864B_RATE
If you compile this as a module, you can still override this
value using the module parameters.
+config IMG_ASCII_LCD
+ tristate "Imagination Technologies ASCII LCD Display"
+ default y if MIPS_MALTA || MIPS_SEAD3
+ select SYSCON
+ help
+ Enable this to support the simple ASCII LCD displays found on
+ development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
+ from Imagination Technologies.
+
endif # AUXDISPLAY
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 8a8936a468b9..3127175c89df 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_KS0108) += ks0108.o
obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o
+obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o
diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c
new file mode 100644
index 000000000000..bf43b5d2aafc
--- /dev/null
+++ b/drivers/auxdisplay/img-ascii-lcd.c
@@ -0,0 +1,443 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <generated/utsrelease.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+struct img_ascii_lcd_ctx;
+
+/**
+ * struct img_ascii_lcd_config - Configuration information about an LCD model
+ * @num_chars: the number of characters the LCD can display
+ * @external_regmap: true if registers are in a system controller, else false
+ * @update: function called to update the LCD
+ */
+struct img_ascii_lcd_config {
+ unsigned int num_chars;
+ bool external_regmap;
+ void (*update)(struct img_ascii_lcd_ctx *ctx);
+};
+
+/**
+ * struct img_ascii_lcd_ctx - Private data structure
+ * @pdev: the ASCII LCD platform device
+ * @base: the base address of the LCD registers
+ * @regmap: the regmap through which LCD registers are accessed
+ * @offset: the offset within regmap to the start of the LCD registers
+ * @cfg: pointer to the LCD model configuration
+ * @message: the full message to display or scroll on the LCD
+ * @message_len: the length of the @message string
+ * @scroll_pos: index of the first character of @message currently displayed
+ * @scroll_rate: scroll interval in jiffies
+ * @timer: timer used to implement scrolling
+ * @curr: the string currently displayed on the LCD
+ */
+struct img_ascii_lcd_ctx {
+ struct platform_device *pdev;
+ union {
+ void __iomem *base;
+ struct regmap *regmap;
+ };
+ u32 offset;
+ const struct img_ascii_lcd_config *cfg;
+ char *message;
+ unsigned int message_len;
+ unsigned int scroll_pos;
+ unsigned int scroll_rate;
+ struct timer_list timer;
+ char curr[] __aligned(8);
+};
+
+/*
+ * MIPS Boston development board
+ */
+
+static void boston_update(struct img_ascii_lcd_ctx *ctx)
+{
+ ulong val;
+
+#if BITS_PER_LONG == 64
+ val = *((u64 *)&ctx->curr[0]);
+ __raw_writeq(val, ctx->base);
+#elif BITS_PER_LONG == 32
+ val = *((u32 *)&ctx->curr[0]);
+ __raw_writel(val, ctx->base);
+ val = *((u32 *)&ctx->curr[4]);
+ __raw_writel(val, ctx->base + 4);
+#else
+# error Not 32 or 64 bit
+#endif
+}
+
+static struct img_ascii_lcd_config boston_config = {
+ .num_chars = 8,
+ .update = boston_update,
+};
+
+/*
+ * MIPS Malta development board
+ */
+
+static void malta_update(struct img_ascii_lcd_ctx *ctx)
+{
+ unsigned int i;
+ int err;
+
+ for (i = 0; i < ctx->cfg->num_chars; i++) {
+ err = regmap_write(ctx->regmap,
+ ctx->offset + (i * 8), ctx->curr[i]);
+ if (err)
+ break;
+ }
+
+ if (unlikely(err))
+ pr_err_ratelimited("Failed to update LCD display: %d\n", err);
+}
+
+static struct img_ascii_lcd_config malta_config = {
+ .num_chars = 8,
+ .external_regmap = true,
+ .update = malta_update,
+};
+
+/*
+ * MIPS SEAD3 development board
+ */
+
+enum {
+ SEAD3_REG_LCD_CTRL = 0x00,
+#define SEAD3_REG_LCD_CTRL_SETDRAM BIT(7)
+ SEAD3_REG_LCD_DATA = 0x08,
+ SEAD3_REG_CPLD_STATUS = 0x10,
+#define SEAD3_REG_CPLD_STATUS_BUSY BIT(0)
+ SEAD3_REG_CPLD_DATA = 0x18,
+#define SEAD3_REG_CPLD_DATA_BUSY BIT(7)
+};
+
+static int sead3_wait_sm_idle(struct img_ascii_lcd_ctx *ctx)
+{
+ unsigned int status;
+ int err;
+
+ do {
+ err = regmap_read(ctx->regmap,
+ ctx->offset + SEAD3_REG_CPLD_STATUS,
+ &status);
+ if (err)
+ return err;
+ } while (status & SEAD3_REG_CPLD_STATUS_BUSY);
+
+ return 0;
+
+}
+
+static int sead3_wait_lcd_idle(struct img_ascii_lcd_ctx *ctx)
+{
+ unsigned int cpld_data;
+ int err;
+
+ err = sead3_wait_sm_idle(ctx);
+ if (err)
+ return err;
+
+ do {
+ err = regmap_read(ctx->regmap,
+ ctx->offset + SEAD3_REG_LCD_CTRL,
+ &cpld_data);
+ if (err)
+ return err;
+
+ err = sead3_wait_sm_idle(ctx);
+ if (err)
+ return err;
+
+ err = regmap_read(ctx->regmap,
+ ctx->offset + SEAD3_REG_CPLD_DATA,
+ &cpld_data);
+ if (err)
+ return err;
+ } while (cpld_data & SEAD3_REG_CPLD_DATA_BUSY);
+
+ return 0;
+}
+
+static void sead3_update(struct img_ascii_lcd_ctx *ctx)
+{
+ unsigned int i;
+ int err;
+
+ for (i = 0; i < ctx->cfg->num_chars; i++) {
+ err = sead3_wait_lcd_idle(ctx);
+ if (err)
+ break;
+
+ err = regmap_write(ctx->regmap,
+ ctx->offset + SEAD3_REG_LCD_CTRL,
+ SEAD3_REG_LCD_CTRL_SETDRAM | i);
+ if (err)
+ break;
+
+ err = sead3_wait_lcd_idle(ctx);
+ if (err)
+ break;
+
+ err = regmap_write(ctx->regmap,
+ ctx->offset + SEAD3_REG_LCD_DATA,
+ ctx->curr[i]);
+ if (err)
+ break;
+ }
+
+ if (unlikely(err))
+ pr_err_ratelimited("Failed to update LCD display: %d\n", err);
+}
+
+static struct img_ascii_lcd_config sead3_config = {
+ .num_chars = 16,
+ .external_regmap = true,
+ .update = sead3_update,
+};
+
+static const struct of_device_id img_ascii_lcd_matches[] = {
+ { .compatible = "img,boston-lcd", .data = &boston_config },
+ { .compatible = "mti,malta-lcd", .data = &malta_config },
+ { .compatible = "mti,sead3-lcd", .data = &sead3_config },
+};
+
+/**
+ * img_ascii_lcd_scroll() - scroll the display by a character
+ * @arg: really a pointer to the private data structure
+ *
+ * Scroll the current message along the LCD by one character, rearming the
+ * timer if required.
+ */
+static void img_ascii_lcd_scroll(unsigned long arg)
+{
+ struct img_ascii_lcd_ctx *ctx = (struct img_ascii_lcd_ctx *)arg;
+ unsigned int i, ch = ctx->scroll_pos;
+ unsigned int num_chars = ctx->cfg->num_chars;
+
+ /* update the current message string */
+ for (i = 0; i < num_chars;) {
+ /* copy as many characters from the string as possible */
+ for (; i < num_chars && ch < ctx->message_len; i++, ch++)
+ ctx->curr[i] = ctx->message[ch];
+
+ /* wrap around to the start of the string */
+ ch = 0;
+ }
+
+ /* update the LCD */
+ ctx->cfg->update(ctx);
+
+ /* move on to the next character */
+ ctx->scroll_pos++;
+ ctx->scroll_pos %= ctx->message_len;
+
+ /* rearm the timer */
+ if (ctx->message_len > ctx->cfg->num_chars)
+ mod_timer(&ctx->timer, jiffies + ctx->scroll_rate);
+}
+
+/**
+ * img_ascii_lcd_display() - set the message to be displayed
+ * @ctx: pointer to the private data structure
+ * @msg: the message to display
+ * @count: length of msg, or -1
+ *
+ * Display a new message @msg on the LCD. @msg can be longer than the number of
+ * characters the LCD can display, in which case it will begin scrolling across
+ * the LCD display.
+ *
+ * Return: 0 on success, -ENOMEM on memory allocation failure
+ */
+static int img_ascii_lcd_display(struct img_ascii_lcd_ctx *ctx,
+ const char *msg, ssize_t count)
+{
+ char *new_msg;
+
+ /* stop the scroll timer */
+ del_timer_sync(&ctx->timer);
+
+ if (count == -1)
+ count = strlen(msg);
+
+ /* if the string ends with a newline, trim it */
+ if (msg[count - 1] == '\n')
+ count--;
+
+ new_msg = devm_kmalloc(&ctx->pdev->dev, count + 1, GFP_KERNEL);
+ if (!new_msg)
+ return -ENOMEM;
+
+ memcpy(new_msg, msg, count);
+ new_msg[count] = 0;
+
+ if (ctx->message)
+ devm_kfree(&ctx->pdev->dev, ctx->message);
+
+ ctx->message = new_msg;
+ ctx->message_len = count;
+ ctx->scroll_pos = 0;
+
+ /* update the LCD */
+ img_ascii_lcd_scroll((unsigned long)ctx);
+
+ return 0;
+}
+
+/**
+ * message_show() - read message via sysfs
+ * @dev: the LCD device
+ * @attr: the LCD message attribute
+ * @buf: the buffer to read the message into
+ *
+ * Read the current message being displayed or scrolled across the LCD display
+ * into @buf, for reads from sysfs.
+ *
+ * Return: the number of characters written to @buf
+ */
+static ssize_t message_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct img_ascii_lcd_ctx *ctx = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", ctx->message);
+}
+
+/**
+ * message_store() - write a new message via sysfs
+ * @dev: the LCD device
+ * @attr: the LCD message attribute
+ * @buf: the buffer containing the new message
+ * @count: the size of the message in @buf
+ *
+ * Write a new message to display or scroll across the LCD display from sysfs.
+ *
+ * Return: the size of the message on success, else -ERRNO
+ */
+static ssize_t message_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct img_ascii_lcd_ctx *ctx = dev_get_drvdata(dev);
+ int err;
+
+ err = img_ascii_lcd_display(ctx, buf, count);
+ return err ?: count;
+}
+
+static DEVICE_ATTR_RW(message);
+
+/**
+ * img_ascii_lcd_probe() - probe an LCD display device
+ * @pdev: the LCD platform device
+ *
+ * Probe an LCD display device, ensuring that we have the required resources in
+ * order to access the LCD & setting up private data as well as sysfs files.
+ *
+ * Return: 0 on success, else -ERRNO
+ */
+static int img_ascii_lcd_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ const struct img_ascii_lcd_config *cfg;
+ struct img_ascii_lcd_ctx *ctx;
+ struct resource *res;
+ int err;
+
+ match = of_match_device(img_ascii_lcd_matches, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ cfg = match->data;
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx) + cfg->num_chars,
+ GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ if (cfg->external_regmap) {
+ ctx->regmap = syscon_node_to_regmap(pdev->dev.parent->of_node);
+ if (IS_ERR(ctx->regmap))
+ return PTR_ERR(ctx->regmap);
+
+ if (of_property_read_u32(pdev->dev.of_node, "offset",
+ &ctx->offset))
+ return -EINVAL;
+ } else {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ctx->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ctx->base))
+ return PTR_ERR(ctx->base);
+ }
+
+ ctx->pdev = pdev;
+ ctx->cfg = cfg;
+ ctx->message = NULL;
+ ctx->scroll_pos = 0;
+ ctx->scroll_rate = HZ / 2;
+
+ /* initialise a timer for scrolling the message */
+ init_timer(&ctx->timer);
+ ctx->timer.function = img_ascii_lcd_scroll;
+ ctx->timer.data = (unsigned long)ctx;
+
+ platform_set_drvdata(pdev, ctx);
+
+ /* display a default message */
+ err = img_ascii_lcd_display(ctx, "Linux " UTS_RELEASE " ", -1);
+ if (err)
+ goto out_del_timer;
+
+ err = device_create_file(&pdev->dev, &dev_attr_message);
+ if (err)
+ goto out_del_timer;
+
+ return 0;
+out_del_timer:
+ del_timer_sync(&ctx->timer);
+ return err;
+}
+
+/**
+ * img_ascii_lcd_remove() - remove an LCD display device
+ * @pdev: the LCD platform device
+ *
+ * Remove an LCD display device, freeing private resources & ensuring that the
+ * driver stops using the LCD display registers.
+ *
+ * Return: 0
+ */
+static int img_ascii_lcd_remove(struct platform_device *pdev)
+{
+ struct img_ascii_lcd_ctx *ctx = platform_get_drvdata(pdev);
+
+ device_remove_file(&pdev->dev, &dev_attr_message);
+ del_timer_sync(&ctx->timer);
+ return 0;
+}
+
+static struct platform_driver img_ascii_lcd_driver = {
+ .driver = {
+ .name = "img-ascii-lcd",
+ .of_match_table = img_ascii_lcd_matches,
+ },
+ .probe = img_ascii_lcd_probe,
+ .remove = img_ascii_lcd_remove,
+};
+module_platform_driver(img_ascii_lcd_driver);
diff --git a/drivers/cpuidle/Kconfig.mips b/drivers/cpuidle/Kconfig.mips
index 4102be01d06a..512ee37b374b 100644
--- a/drivers/cpuidle/Kconfig.mips
+++ b/drivers/cpuidle/Kconfig.mips
@@ -5,7 +5,7 @@ config MIPS_CPS_CPUIDLE
bool "CPU Idle driver for MIPS CPS platforms"
depends on CPU_IDLE && MIPS_CPS
depends on SYS_SUPPORTS_MIPS_CPS
- select ARCH_NEEDS_CPU_IDLE_COUPLED if MIPS_MT
+ select ARCH_NEEDS_CPU_IDLE_COUPLED if MIPS_MT || CPU_MIPSR6
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select MIPS_CPS_PM
default y
diff --git a/drivers/cpuidle/cpuidle-cps.c b/drivers/cpuidle/cpuidle-cps.c
index 1adb6980b707..926ba9871c62 100644
--- a/drivers/cpuidle/cpuidle-cps.c
+++ b/drivers/cpuidle/cpuidle-cps.c
@@ -163,7 +163,7 @@ static int __init cps_cpuidle_init(void)
core = cpu_data[cpu].core;
device = &per_cpu(cpuidle_dev, cpu);
device->cpu = cpu;
-#ifdef CONFIG_MIPS_MT
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
cpumask_copy(&device->coupled_cpus, &cpu_sibling_map[cpu]);
#endif
diff --git a/drivers/irqchip/irq-i8259.c b/drivers/irqchip/irq-i8259.c
index 6b304eb39bd2..1aec12c6d9ac 100644
--- a/drivers/irqchip/irq-i8259.c
+++ b/drivers/irqchip/irq-i8259.c
@@ -38,6 +38,7 @@ static void disable_8259A_irq(struct irq_data *d);
static void enable_8259A_irq(struct irq_data *d);
static void mask_and_ack_8259A(struct irq_data *d);
static void init_8259A(int auto_eoi);
+static int (*i8259_poll)(void) = i8259_irq;
static struct irq_chip i8259A_chip = {
.name = "XT-PIC",
@@ -51,6 +52,11 @@ static struct irq_chip i8259A_chip = {
* 8259A PIC functions to handle ISA devices:
*/
+void i8259_set_poll(int (*poll)(void))
+{
+ i8259_poll = poll;
+}
+
/*
* This contains the irq mask for both 8259A irq controllers,
*/
@@ -89,24 +95,6 @@ static void enable_8259A_irq(struct irq_data *d)
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
-int i8259A_irq_pending(unsigned int irq)
-{
- unsigned int mask;
- unsigned long flags;
- int ret;
-
- irq -= I8259A_IRQ_BASE;
- mask = 1 << irq;
- raw_spin_lock_irqsave(&i8259A_lock, flags);
- if (irq < 8)
- ret = inb(PIC_MASTER_CMD) & mask;
- else
- ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
- raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-
- return ret;
-}
-
void make_8259A_irq(unsigned int irq)
{
disable_irq_nosync(irq);
@@ -355,7 +343,7 @@ void __init init_i8259_irqs(void)
static void i8259_irq_dispatch(struct irq_desc *desc)
{
struct irq_domain *domain = irq_desc_get_handler_data(desc);
- int hwirq = i8259_irq();
+ int hwirq = i8259_poll();
unsigned int irq;
if (hwirq < 0)
@@ -370,13 +358,15 @@ int __init i8259_of_init(struct device_node *node, struct device_node *parent)
struct irq_domain *domain;
unsigned int parent_irq;
+ domain = __init_i8259_irqs(node);
+
parent_irq = irq_of_parse_and_map(node, 0);
if (!parent_irq) {
pr_err("Failed to map i8259 parent IRQ\n");
+ irq_domain_remove(domain);
return -ENODEV;
}
- domain = __init_i8259_irqs(node);
irq_set_chained_handler_and_data(parent_irq, i8259_irq_dispatch,
domain);
return 0;
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index f811d2796437..e4bf07d20f9b 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -29,6 +29,7 @@
const struct of_device_id of_default_bus_match_table[] = {
{ .compatible = "simple-bus", },
{ .compatible = "simple-mfd", },
+ { .compatible = "isa", },
#ifdef CONFIG_ARM_AMBA
{ .compatible = "arm,amba-bus", },
#endif /* CONFIG_ARM_AMBA */
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 1e5f529d51a2..063064801ceb 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1308,11 +1308,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_mv_driver
#endif
-#ifdef CONFIG_MIPS_SEAD3
-#include "ehci-sead3.c"
-#define PLATFORM_DRIVER ehci_hcd_sead3_driver
-#endif
-
static int __init ehci_hcd_init(void)
{
int retval = 0;
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
deleted file mode 100644
index 3d86cc2ffe68..000000000000
--- a/drivers/usb/host/ehci-sead3.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * MIPS CI13320A EHCI Host Controller driver
- * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com>
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-static int ehci_sead3_setup(struct usb_hcd *hcd)
-{
- int ret;
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- ehci->caps = hcd->regs + 0x100;
-
-#ifdef __BIG_ENDIAN
- ehci->big_endian_mmio = 1;
- ehci->big_endian_desc = 1;
-#endif
-
- ret = ehci_setup(hcd);
- if (ret)
- return ret;
-
- ehci->need_io_watchdog = 0;
-
- /* Set burst length to 16 words. */
- ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]);
-
- return ret;
-}
-
-const struct hc_driver ehci_sead3_hc_driver = {
- .description = hcd_name,
- .product_desc = "SEAD-3 EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
-
- /*
- * basic lifecycle operations
- *
- */
- .reset = ehci_sead3_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct resource *res;
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug("resource[1] is not IORESOURCE_IRQ");
- return -ENOMEM;
- }
- hcd = usb_create_hcd(&ehci_sead3_hc_driver, &pdev->dev, "SEAD-3");
- if (!hcd)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- ret = PTR_ERR(hcd->regs);
- goto err1;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- /* Root hub has integrated TT. */
- hcd->has_tt = 1;
-
- ret = usb_add_hcd(hcd, pdev->resource[1].start,
- IRQF_SHARED);
- if (ret == 0) {
- platform_set_drvdata(pdev, hcd);
- device_wakeup_enable(hcd->self.controller);
- return ret;
- }
-
-err1:
- usb_put_hcd(hcd);
- return ret;
-}
-
-static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int ehci_hcd_sead3_drv_suspend(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
- bool do_wakeup = device_may_wakeup(dev);
-
- return ehci_suspend(hcd, do_wakeup);
-}
-
-static int ehci_hcd_sead3_drv_resume(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-
- ehci_resume(hcd, false);
- return 0;
-}
-
-static const struct dev_pm_ops sead3_ehci_pmops = {
- .suspend = ehci_hcd_sead3_drv_suspend,
- .resume = ehci_hcd_sead3_drv_resume,
-};
-
-#define SEAD3_EHCI_PMOPS (&sead3_ehci_pmops)
-
-#else
-#define SEAD3_EHCI_PMOPS NULL
-#endif
-
-static struct platform_driver ehci_hcd_sead3_driver = {
- .probe = ehci_hcd_sead3_drv_probe,
- .remove = ehci_hcd_sead3_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "sead3-ehci",
- .pm = SEAD3_EHCI_PMOPS,
- }
-};
-
-MODULE_ALIAS("platform:sead3-ehci");
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index af2f117208f1..5d3b0db5ce0a 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2187,7 +2187,7 @@ config FB_GOLDFISH
config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
- depends on FB && (MIPS_COBALT || MIPS_SEAD3)
+ depends on FB && MIPS_COBALT
config FB_SH7760
bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
diff --git a/drivers/video/fbdev/cobalt_lcdfb.c b/drivers/video/fbdev/cobalt_lcdfb.c
index 07675d6f323e..2d3b691f3fc4 100644
--- a/drivers/video/fbdev/cobalt_lcdfb.c
+++ b/drivers/video/fbdev/cobalt_lcdfb.c
@@ -63,7 +63,6 @@
#define LCD_CUR_POS(x) ((x) & LCD_CUR_POS_MASK)
#define LCD_TEXT_POS(x) ((x) | LCD_TEXT_MODE)
-#ifdef CONFIG_MIPS_COBALT
static inline void lcd_write_control(struct fb_info *info, u8 control)
{
writel((u32)control << 24, info->screen_base);
@@ -83,47 +82,6 @@ static inline u8 lcd_read_data(struct fb_info *info)
{
return readl(info->screen_base + LCD_DATA_REG_OFFSET) >> 24;
}
-#else
-
-#define LCD_CTL 0x00
-#define LCD_DATA 0x08
-#define CPLD_STATUS 0x10
-#define CPLD_DATA 0x18
-
-static inline void cpld_wait(struct fb_info *info)
-{
- do {
- } while (readl(info->screen_base + CPLD_STATUS) & 1);
-}
-
-static inline void lcd_write_control(struct fb_info *info, u8 control)
-{
- cpld_wait(info);
- writel(control, info->screen_base + LCD_CTL);
-}
-
-static inline u8 lcd_read_control(struct fb_info *info)
-{
- cpld_wait(info);
- readl(info->screen_base + LCD_CTL);
- cpld_wait(info);
- return readl(info->screen_base + CPLD_DATA) & 0xff;
-}
-
-static inline void lcd_write_data(struct fb_info *info, u8 data)
-{
- cpld_wait(info);
- writel(data, info->screen_base + LCD_DATA);
-}
-
-static inline u8 lcd_read_data(struct fb_info *info)
-{
- cpld_wait(info);
- readl(info->screen_base + LCD_DATA);
- cpld_wait(info);
- return readl(info->screen_base + CPLD_DATA) & 0xff;
-}
-#endif
static int lcd_busy_wait(struct fb_info *info)
{