summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/net/fsl-fec.txt4
-rw-r--r--drivers/net/ethernet/freescale/fec_main.c16
2 files changed, 19 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index a1e3693cca16..6f55bdd52f8a 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -15,6 +15,10 @@ Optional properties:
- phy-reset-active-high : If present then the reset sequence using the GPIO
specified in the "phy-reset-gpios" property is reversed (H=reset state,
L=operation state).
+- phy-reset-post-delay : Post reset delay in milliseconds. If present then
+ a delay of phy-reset-post-delay milliseconds will be observed after the
+ phy-reset-gpios has been toggled. Can be omitted thus no delay is
+ observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
- phy-supply : regulator that powers the Ethernet PHY.
- phy-handle : phandle to the PHY device connected to this device.
- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 56a563f90b0b..f7c8649fd28f 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3192,7 +3192,7 @@ static int fec_reset_phy(struct platform_device *pdev)
{
int err, phy_reset;
bool active_high = false;
- int msec = 1;
+ int msec = 1, phy_post_delay = 0;
struct device_node *np = pdev->dev.of_node;
if (!np)
@@ -3209,6 +3209,11 @@ static int fec_reset_phy(struct platform_device *pdev)
else if (!gpio_is_valid(phy_reset))
return 0;
+ err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
+ /* valid reset duration should be less than 1s */
+ if (!err && phy_post_delay > 1000)
+ return -EINVAL;
+
active_high = of_property_read_bool(np, "phy-reset-active-high");
err = devm_gpio_request_one(&pdev->dev, phy_reset,
@@ -3226,6 +3231,15 @@ static int fec_reset_phy(struct platform_device *pdev)
gpio_set_value_cansleep(phy_reset, !active_high);
+ if (!phy_post_delay)
+ return 0;
+
+ if (phy_post_delay > 20)
+ msleep(phy_post_delay);
+ else
+ usleep_range(phy_post_delay * 1000,
+ phy_post_delay * 1000 + 1000);
+
return 0;
}
#else /* CONFIG_OF */