summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/zl610026
-rw-r--r--drivers/hwmon/pmbus/zl6100.c176
2 files changed, 188 insertions, 14 deletions
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index a995b41724fd..3d924b6b59e9 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -121,12 +121,26 @@ in1_max_alarm Input voltage high alarm.
in1_lcrit_alarm Input voltage critical low alarm.
in1_crit_alarm Input voltage critical high alarm.
-in2_label "vout1"
-in2_input Measured output voltage.
-in2_lcrit Critical minimum output Voltage.
-in2_crit Critical maximum output voltage.
-in2_lcrit_alarm Critical output voltage critical low alarm.
-in2_crit_alarm Critical output voltage critical high alarm.
+in2_label "vmon"
+in2_input Measured voltage on VMON (ZL2004) or VDRV (ZL9101M,
+ ZL9117M) pin. Reported voltage is 16x the voltage on the
+ pin (adjusted internally by the chip).
+in2_lcrit Critical minumum VMON/VDRV Voltage.
+in2_crit Critical maximum VMON/VDRV voltage.
+in2_lcrit_alarm VMON/VDRV voltage critical low alarm.
+in2_crit_alarm VMON/VDRV voltage critical high alarm.
+
+ vmon attributes are supported on ZL2004, ZL9101M,
+ and ZL9117M only.
+
+inX_label "vout1"
+inX_input Measured output voltage.
+inX_lcrit Critical minimum output Voltage.
+inX_crit Critical maximum output voltage.
+inX_lcrit_alarm Critical output voltage critical low alarm.
+inX_crit_alarm Critical output voltage critical high alarm.
+
+ X is 3 for ZL2004, ZL9101M, and ZL9117M, 2 otherwise.
curr1_label "iout1"
curr1_input Measured output current.
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
index fc5eed8e85bb..819644121259 100644
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -2,6 +2,7 @@
* Hardware monitoring driver for ZL6100 and compatibles
*
* Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -45,12 +46,87 @@ struct zl6100_data {
#define ZL6100_MFR_XTEMP_ENABLE (1 << 7)
+#define MFR_VMON_OV_FAULT_LIMIT 0xf5
+#define MFR_VMON_UV_FAULT_LIMIT 0xf6
+#define MFR_READ_VMON 0xf7
+
+#define VMON_UV_WARNING (1 << 5)
+#define VMON_OV_WARNING (1 << 4)
+#define VMON_UV_FAULT (1 << 1)
+#define VMON_OV_FAULT (1 << 0)
+
#define ZL6100_WAIT_TIME 1000 /* uS */
static ushort delay = ZL6100_WAIT_TIME;
module_param(delay, ushort, 0644);
MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
+/* Convert linear sensor value to milli-units */
+static long zl6100_l2d(s16 l)
+{
+ s16 exponent;
+ s32 mantissa;
+ long val;
+
+ exponent = l >> 11;
+ mantissa = ((s16)((l & 0x7ff) << 5)) >> 5;
+
+ val = mantissa;
+
+ /* scale result to milli-units */
+ val = val * 1000L;
+
+ if (exponent >= 0)
+ val <<= exponent;
+ else
+ val >>= -exponent;
+
+ return val;
+}
+
+#define MAX_MANTISSA (1023 * 1000)
+#define MIN_MANTISSA (511 * 1000)
+
+static u16 zl6100_d2l(long val)
+{
+ s16 exponent = 0, mantissa;
+ bool negative = false;
+
+ /* simple case */
+ if (val == 0)
+ return 0;
+
+ if (val < 0) {
+ negative = true;
+ val = -val;
+ }
+
+ /* Reduce large mantissa until it fits into 10 bit */
+ while (val >= MAX_MANTISSA && exponent < 15) {
+ exponent++;
+ val >>= 1;
+ }
+ /* Increase small mantissa to improve precision */
+ while (val < MIN_MANTISSA && exponent > -15) {
+ exponent--;
+ val <<= 1;
+ }
+
+ /* Convert mantissa from milli-units to units */
+ mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+ /* Ensure that resulting number is within range */
+ if (mantissa > 0x3ff)
+ mantissa = 0x3ff;
+
+ /* restore sign */
+ if (negative)
+ mantissa = -mantissa;
+
+ /* Convert to 5 bit exponent, 11 bit mantissa */
+ return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
/* Some chips need a delay between accesses */
static inline void zl6100_wait(const struct zl6100_data *data)
{
@@ -65,9 +141,9 @@ static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct zl6100_data *data = to_zl6100_data(info);
- int ret;
+ int ret, vreg;
- if (page || reg >= PMBUS_VIRT_BASE)
+ if (page > 0)
return -ENXIO;
if (data->id == zl2005) {
@@ -83,9 +159,39 @@ static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
}
}
+ switch (reg) {
+ case PMBUS_VIRT_READ_VMON:
+ vreg = MFR_READ_VMON;
+ break;
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ break;
+ default:
+ if (reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+ vreg = reg;
+ break;
+ }
+
zl6100_wait(data);
- ret = pmbus_read_word_data(client, page, reg);
+ ret = pmbus_read_word_data(client, page, vreg);
data->access = ktime_get();
+ if (ret < 0)
+ return ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 9, 10));
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 11, 10));
+ break;
+ }
return ret;
}
@@ -94,13 +200,35 @@ static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct zl6100_data *data = to_zl6100_data(info);
- int ret;
+ int ret, status;
if (page > 0)
return -ENXIO;
zl6100_wait(data);
- ret = pmbus_read_byte_data(client, page, reg);
+
+ switch (reg) {
+ case PMBUS_VIRT_STATUS_VMON:
+ ret = pmbus_read_byte_data(client, 0,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (ret < 0)
+ break;
+
+ status = 0;
+ if (ret & VMON_UV_WARNING)
+ status |= PB_VOLTAGE_UV_WARNING;
+ if (ret & VMON_OV_WARNING)
+ status |= PB_VOLTAGE_OV_WARNING;
+ if (ret & VMON_UV_FAULT)
+ status |= PB_VOLTAGE_UV_FAULT;
+ if (ret & VMON_OV_FAULT)
+ status |= PB_VOLTAGE_OV_FAULT;
+ ret = status;
+ break;
+ default:
+ ret = pmbus_read_byte_data(client, page, reg);
+ break;
+ }
data->access = ktime_get();
return ret;
@@ -111,13 +239,38 @@ static int zl6100_write_word_data(struct i2c_client *client, int page, int reg,
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct zl6100_data *data = to_zl6100_data(info);
- int ret;
+ int ret, vreg;
- if (page || reg >= PMBUS_VIRT_BASE)
+ if (page > 0)
return -ENXIO;
+ switch (reg) {
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 9));
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 11));
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ default:
+ if (reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+ vreg = reg;
+ }
+
zl6100_wait(data);
- ret = pmbus_write_word_data(client, page, reg, word);
+ ret = pmbus_write_word_data(client, page, vreg, word);
data->access = ktime_get();
return ret;
@@ -225,6 +378,13 @@ static int zl6100_probe(struct i2c_client *client,
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ /*
+ * ZL2004, ZL9101M, and ZL9117M support monitoring an extra voltage
+ * (VMON for ZL2004, VDRV for ZL9101M and ZL9117M). Report it as vmon.
+ */
+ if (data->id == zl2004 || data->id == zl9101 || data->id == zl9117)
+ info->func[0] |= PMBUS_HAVE_VMON | PMBUS_HAVE_STATUS_VMON;
+
ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG);
if (ret < 0)
return ret;