summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/snmp_counter.rst240
1 files changed, 239 insertions, 1 deletions
diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst
index f8eb77ddbd44..b0dfdaaca512 100644
--- a/Documentation/networking/snmp_counter.rst
+++ b/Documentation/networking/snmp_counter.rst
@@ -571,7 +571,97 @@ duplicate packet is received.
* TcpExtTCPDSACKOfoRecv
The TCP stack receives a DSACK, which indicate an out of order
-duplciate packet is received.
+duplicate packet is received.
+
+TCP out of order
+===============
+* TcpExtTCPOFOQueue
+The TCP layer receives an out of order packet and has enough memory
+to queue it.
+
+* TcpExtTCPOFODrop
+The TCP layer receives an out of order packet but doesn't have enough
+memory, so drops it. Such packets won't be counted into
+TcpExtTCPOFOQueue.
+
+* TcpExtTCPOFOMerge
+The received out of order packet has an overlay with the previous
+packet. the overlay part will be dropped. All of TcpExtTCPOFOMerge
+packets will also be counted into TcpExtTCPOFOQueue.
+
+TCP PAWS
+=======
+PAWS (Protection Against Wrapped Sequence numbers) is an algorithm
+which is used to drop old packets. It depends on the TCP
+timestamps. For detail information, please refer the `timestamp wiki`_
+and the `RFC of PAWS`_.
+
+.. _RFC of PAWS: https://tools.ietf.org/html/rfc1323#page-17
+.. _timestamp wiki: https://en.wikipedia.org/wiki/Transmission_Control_Protocol#TCP_timestamps
+
+* TcpExtPAWSActive
+Packets are dropped by PAWS in Syn-Sent status.
+
+* TcpExtPAWSEstab
+Packets are dropped by PAWS in any status other than Syn-Sent.
+
+TCP ACK skip
+===========
+In some scenarios, kernel would avoid sending duplicate ACKs too
+frequently. Please find more details in the tcp_invalid_ratelimit
+section of the `sysctl document`_. When kernel decides to skip an ACK
+due to tcp_invalid_ratelimit, kernel would update one of below
+counters to indicate the ACK is skipped in which scenario. The ACK
+would only be skipped if the received packet is either a SYN packet or
+it has no data.
+
+.. _sysctl document: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
+
+* TcpExtTCPACKSkippedSynRecv
+The ACK is skipped in Syn-Recv status. The Syn-Recv status means the
+TCP stack receives a SYN and replies SYN+ACK. Now the TCP stack is
+waiting for an ACK. Generally, the TCP stack doesn't need to send ACK
+in the Syn-Recv status. But in several scenarios, the TCP stack need
+to send an ACK. E.g., the TCP stack receives the same SYN packet
+repeately, the received packet does not pass the PAWS check, or the
+received packet sequence number is out of window. In these scenarios,
+the TCP stack needs to send ACK. If the ACk sending frequency is higher than
+tcp_invalid_ratelimit allows, the TCP stack will skip sending ACK and
+increase TcpExtTCPACKSkippedSynRecv.
+
+
+* TcpExtTCPACKSkippedPAWS
+The ACK is skipped due to PAWS (Protect Against Wrapped Sequence
+numbers) check fails. If the PAWS check fails in Syn-Recv, Fin-Wait-2
+or Time-Wait statuses, the skipped ACK would be counted to
+TcpExtTCPACKSkippedSynRecv, TcpExtTCPACKSkippedFinWait2 or
+TcpExtTCPACKSkippedTimeWait. In all other statuses, the skipped ACK
+would be counted to TcpExtTCPACKSkippedPAWS.
+
+* TcpExtTCPACKSkippedSeq
+The sequence number is out of window and the timestamp passes the PAWS
+check and the TCP status is not Syn-Recv, Fin-Wait-2, and Time-Wait.
+
+* TcpExtTCPACKSkippedFinWait2
+The ACK is skipped in Fin-Wait-2 status, the reason would be either
+PAWS check fails or the received sequence number is out of window.
+
+* TcpExtTCPACKSkippedTimeWait
+Tha ACK is skipped in Time-Wait status, the reason would be either
+PAWS check failed or the received sequence number is out of window.
+
+* TcpExtTCPACKSkippedChallenge
+The ACK is skipped if the ACK is a challenge ACK. The RFC 5961 defines
+3 kind of challenge ACK, please refer `RFC 5961 section 3.2`_,
+`RFC 5961 section 4.2`_ and `RFC 5961 section 5.2`_. Besides these
+three scenarios, In some TCP status, the linux TCP stack would also
+send challenge ACKs if the ACK number is before the first
+unacknowledged number (more strict than `RFC 5961 section 5.2`_).
+
+.. _RFC 5961 section 3.2: https://tools.ietf.org/html/rfc5961#page-7
+.. _RFC 5961 section 4.2: https://tools.ietf.org/html/rfc5961#page-9
+.. _RFC 5961 section 5.2: https://tools.ietf.org/html/rfc5961#page-11
+
examples
=======
@@ -1188,3 +1278,151 @@ Run nstat on server B::
We have deleted the default route on server B. Server B couldn't find
a route for the 8.8.8.8 IP address, so server B increased
IpOutNoRoutes.
+
+TcpExtTCPACKSkippedSynRecv
+------------------------
+In this test, we send 3 same SYN packets from client to server. The
+first SYN will let server create a socket, set it to Syn-Recv status,
+and reply a SYN/ACK. The second SYN will let server reply the SYN/ACK
+again, and record the reply time (the duplicate ACK reply time). The
+third SYN will let server check the previous duplicate ACK reply time,
+and decide to skip the duplicate ACK, then increase the
+TcpExtTCPACKSkippedSynRecv counter.
+
+Run tcpdump to capture a SYN packet::
+
+ nstatuser@nstat-a:~$ sudo tcpdump -c 1 -w /tmp/syn.pcap port 9000
+ tcpdump: listening on ens3, link-type EN10MB (Ethernet), capture size 262144 bytes
+
+Open another terminal, run nc command::
+
+ nstatuser@nstat-a:~$ nc nstat-b 9000
+
+As the nstat-b didn't listen on port 9000, it should reply a RST, and
+the nc command exited immediately. It was enough for the tcpdump
+command to capture a SYN packet. A linux server might use hardware
+offload for the TCP checksum, so the checksum in the /tmp/syn.pcap
+might be not correct. We call tcprewrite to fix it::
+
+ nstatuser@nstat-a:~$ tcprewrite --infile=/tmp/syn.pcap --outfile=/tmp/syn_fixcsum.pcap --fixcsum
+
+On nstat-b, we run nc to listen on port 9000::
+
+ nstatuser@nstat-b:~$ nc -lkv 9000
+ Listening on [0.0.0.0] (family 0, port 9000)
+
+On nstat-a, we blocked the packet from port 9000, or nstat-a would send
+RST to nstat-b::
+
+ nstatuser@nstat-a:~$ sudo iptables -A INPUT -p tcp --sport 9000 -j DROP
+
+Send 3 SYN repeatly to nstat-b::
+
+ nstatuser@nstat-a:~$ for i in {1..3}; do sudo tcpreplay -i ens3 /tmp/syn_fixcsum.pcap; done
+
+Check snmp cunter on nstat-b::
+
+ nstatuser@nstat-b:~$ nstat | grep -i skip
+ TcpExtTCPACKSkippedSynRecv 1 0.0
+
+As we expected, TcpExtTCPACKSkippedSynRecv is 1.
+
+TcpExtTCPACKSkippedPAWS
+----------------------
+To trigger PAWS, we could send an old SYN.
+
+On nstat-b, let nc listen on port 9000::
+
+ nstatuser@nstat-b:~$ nc -lkv 9000
+ Listening on [0.0.0.0] (family 0, port 9000)
+
+On nstat-a, run tcpdump to capture a SYN::
+
+ nstatuser@nstat-a:~$ sudo tcpdump -w /tmp/paws_pre.pcap -c 1 port 9000
+ tcpdump: listening on ens3, link-type EN10MB (Ethernet), capture size 262144 bytes
+
+On nstat-a, run nc as a client to connect nstat-b::
+
+ nstatuser@nstat-a:~$ nc -v nstat-b 9000
+ Connection to nstat-b 9000 port [tcp/*] succeeded!
+
+Now the tcpdump has captured the SYN and exit. We should fix the
+checksum::
+
+ nstatuser@nstat-a:~$ tcprewrite --infile /tmp/paws_pre.pcap --outfile /tmp/paws.pcap --fixcsum
+
+Send the SYN packet twice::
+
+ nstatuser@nstat-a:~$ for i in {1..2}; do sudo tcpreplay -i ens3 /tmp/paws.pcap; done
+
+On nstat-b, check the snmp counter::
+
+ nstatuser@nstat-b:~$ nstat | grep -i skip
+ TcpExtTCPACKSkippedPAWS 1 0.0
+
+We sent two SYN via tcpreplay, both of them would let PAWS check
+failed, the nstat-b replied an ACK for the first SYN, skipped the ACK
+for the second SYN, and updated TcpExtTCPACKSkippedPAWS.
+
+TcpExtTCPACKSkippedSeq
+--------------------
+To trigger TcpExtTCPACKSkippedSeq, we send packets which have valid
+timestamp (to pass PAWS check) but the sequence number is out of
+window. The linux TCP stack would avoid to skip if the packet has
+data, so we need a pure ACK packet. To generate such a packet, we
+could create two sockets: one on port 9000, another on port 9001. Then
+we capture an ACK on port 9001, change the source/destination port
+numbers to match the port 9000 socket. Then we could trigger
+TcpExtTCPACKSkippedSeq via this packet.
+
+On nstat-b, open two terminals, run two nc commands to listen on both
+port 9000 and port 9001::
+
+ nstatuser@nstat-b:~$ nc -lkv 9000
+ Listening on [0.0.0.0] (family 0, port 9000)
+
+ nstatuser@nstat-b:~$ nc -lkv 9001
+ Listening on [0.0.0.0] (family 0, port 9001)
+
+On nstat-a, run two nc clients::
+
+ nstatuser@nstat-a:~$ nc -v nstat-b 9000
+ Connection to nstat-b 9000 port [tcp/*] succeeded!
+
+ nstatuser@nstat-a:~$ nc -v nstat-b 9001
+ Connection to nstat-b 9001 port [tcp/*] succeeded!
+
+On nstat-a, run tcpdump to capture an ACK::
+
+ nstatuser@nstat-a:~$ sudo tcpdump -w /tmp/seq_pre.pcap -c 1 dst port 9001
+ tcpdump: listening on ens3, link-type EN10MB (Ethernet), capture size 262144 bytes
+
+On nstat-b, send a packet via the port 9001 socket. E.g. we sent a
+string 'foo' in our example::
+
+ nstatuser@nstat-b:~$ nc -lkv 9001
+ Listening on [0.0.0.0] (family 0, port 9001)
+ Connection from nstat-a 42132 received!
+ foo
+
+On nstat-a, the tcpdump should have caputred the ACK. We should check
+the source port numbers of the two nc clients::
+
+ nstatuser@nstat-a:~$ ss -ta '( dport = :9000 || dport = :9001 )' | tee
+ State Recv-Q Send-Q Local Address:Port Peer Address:Port
+ ESTAB 0 0 192.168.122.250:50208 192.168.122.251:9000
+ ESTAB 0 0 192.168.122.250:42132 192.168.122.251:9001
+
+Run tcprewrite, change port 9001 to port 9000, chagne port 42132 to
+port 50208::
+
+ nstatuser@nstat-a:~$ tcprewrite --infile /tmp/seq_pre.pcap --outfile /tmp/seq.pcap -r 9001:9000 -r 42132:50208 --fixcsum
+
+Now the /tmp/seq.pcap is the packet we need. Send it to nstat-b::
+
+ nstatuser@nstat-a:~$ for i in {1..2}; do sudo tcpreplay -i ens3 /tmp/seq.pcap; done
+
+Check TcpExtTCPACKSkippedSeq on nstat-b::
+
+ nstatuser@nstat-b:~$ nstat | grep -i skip
+ TcpExtTCPACKSkippedSeq 1 0.0