summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt1
-rw-r--r--Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt1
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi41
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi174
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi22
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998.dtsi313
-rw-r--r--arch/arm64/boot/dts/qcom/pm8005.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/pm8998.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/pmi8994.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/pmi8998.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/pms405.dtsi11
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts3
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts85
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404-evb.dtsi95
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404.dtsi23
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-mtp.dts8
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845.dtsi371
17 files changed, 1042 insertions, 110 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
index c81993f8d8c3..c8787688122a 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
@@ -13,6 +13,7 @@ VADC node:
Definition: Should contain "qcom,spmi-vadc".
Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
+ Should contain "qcom,pms405-adc" for PMS405 PMIC
- reg:
Usage: required
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 5111e9130bc3..991e21ee7b44 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -11,6 +11,7 @@ Required properties:
the appropriate jedec string:
"qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
"qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
+ "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
"qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
- interrupts : <interrupt mapping for UFS host controller IRQ>
- reg : <registers mapping>
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0803ca8c02da..e4b1010f70b6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -180,19 +180,19 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0_1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 4>;
trips {
- cpu_alert0: trip0 {
+ cpu0_1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -201,7 +201,7 @@
cooling-maps {
map0 {
- trip = <&cpu_alert0>;
+ trip = <&cpu0_1_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -210,19 +210,19 @@
};
};
- cpu-thermal1 {
+ cpu2_3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 3>;
trips {
- cpu_alert1: trip0 {
+ cpu2_3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu2_3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -231,7 +231,7 @@
cooling-maps {
map0 {
- trip = <&cpu_alert1>;
+ trip = <&cpu2_3_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -247,12 +247,12 @@
thermal-sensors = <&tsens 2>;
trips {
- gpu_alert: trip0 {
+ gpu_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- gpu_crit: trip1 {
+ gpu_crit: gpu_crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@@ -267,18 +267,27 @@
thermal-sensors = <&tsens 1>;
trips {
- cam_alert: trip0 {
+ cam_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
- type = "passive";
+ type = "hot";
};
- cam_crit: trip1 {
- temperature = <95000>;
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <85000>;
hysteresis = <2000>;
- type = "critical";
+ type = "hot";
};
};
-
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c761269caf80..edcddc74a4fc 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -154,20 +154,20 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu0_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -175,20 +175,20 @@
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -196,20 +196,20 @@
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu2_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -217,26 +217,176 @@
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit3: trip1 {
+ cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ m4m-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ m4m_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ l3-or-venus-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ l3_or_venus_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster0-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cluster0_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster1-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cluster1_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ q6_dsp_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modemtx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ modemtx_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
};
timer {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index f0901067b043..6329ba4777cc 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -111,6 +111,7 @@
vreg_s4a_1p8: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
};
vreg_s5a_2p04: s5 {
regulator-min-microvolt = <1904000>;
@@ -195,6 +196,7 @@
vreg_l20a_2p95: l20 {
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
+ regulator-allow-set-load;
};
vreg_l21a_2p95: l21 {
regulator-min-microvolt = <2960000>;
@@ -221,6 +223,7 @@
vreg_l26a_1p2: l26 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
};
vreg_l28_3p0: l28 {
regulator-min-microvolt = <3008000>;
@@ -267,6 +270,25 @@
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
};
+&ufshc {
+ vcc-supply = <&vreg_l20a_2p95>;
+ vccq-supply = <&vreg_l26a_1p2>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vcc-max-microamp = <750000>;
+ vccq-max-microamp = <560000>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+ vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+ vdda-phy-max-microamp = <51400>;
+ vdda-pll-max-microamp = <14600>;
+ vddp-ref-clk-max-microamp = <100>;
+ vddp-ref-clk-always-on;
+};
+
&usb3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 3fd0769fe648..32ed67cb1f97 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -78,7 +78,6 @@
compatible = "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "arm,arch-cache";
@@ -97,7 +96,6 @@
compatible = "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_1: l1-icache {
compatible = "arm,arch-cache";
@@ -112,7 +110,6 @@
compatible = "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_2: l1-icache {
compatible = "arm,arch-cache";
@@ -127,7 +124,6 @@
compatible = "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_3: l1-icache {
compatible = "arm,arch-cache";
@@ -142,7 +138,6 @@
compatible = "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "arm,arch-cache";
@@ -161,7 +156,6 @@
compatible = "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_101: l1-icache {
compatible = "arm,arch-cache";
@@ -176,7 +170,6 @@
compatible = "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_102: l1-icache {
compatible = "arm,arch-cache";
@@ -191,7 +184,6 @@
compatible = "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_103: l1-icache {
compatible = "arm,arch-cache";
@@ -346,20 +338,20 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 6>;
+ thermal-sensors = <&tsens0 1>;
trips {
- cpu_alert0: trip0 {
+ cpu0_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -367,20 +359,20 @@
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 7>;
+ thermal-sensors = <&tsens0 2>;
trips {
- cpu_alert1: trip0 {
+ cpu1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -388,20 +380,20 @@
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 8>;
+ thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert2: trip0 {
+ cpu2_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -409,20 +401,20 @@
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 9>;
+ thermal-sensors = <&tsens0 4>;
trips {
- cpu_alert3: trip0 {
+ cpu3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit3: trip1 {
+ cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -430,20 +422,20 @@
};
};
- cpu-thermal4 {
+ cpu4-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 10>;
+ thermal-sensors = <&tsens0 7>;
trips {
- cpu_alert4: trip0 {
+ cpu4_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit4: trip1 {
+ cpu4_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -451,20 +443,20 @@
};
};
- cpu-thermal5 {
+ cpu5-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 11>;
+ thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert5: trip0 {
+ cpu5_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit5: trip1 {
+ cpu5_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -472,20 +464,20 @@
};
};
- cpu-thermal6 {
+ cpu6-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens1 0>;
+ thermal-sensors = <&tsens0 9>;
trips {
- cpu_alert6: trip0 {
+ cpu6_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit6: trip1 {
+ cpu6_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -493,20 +485,20 @@
};
};
- cpu-thermal7 {
+ cpu7-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens1 1>;
+ thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert7: trip0 {
+ cpu7_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit7: trip1 {
+ cpu7_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -514,11 +506,169 @@
};
};
- gpu-thermal {
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster0-mhm-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cluster0_mhm_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster1-mhm-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cluster1_mhm_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster1-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cluster1_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 3>;
+
+ trips {
+ wlan_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6_dsp_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ multimedia-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ multimedia_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
};
@@ -590,17 +740,19 @@
cell-index = <0>;
};
- tsens0: thermal@10aa000 {
+ tsens0: thermal@10ab000 {
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
- reg = <0x10aa000 0x2000>;
+ reg = <0x10ab000 0x1000>, /* TM */
+ <0x10aa000 0x1000>; /* SROT */
#qcom,sensors = <12>;
#thermal-sensor-cells = <1>;
};
- tsens1: thermal@10ad000 {
+ tsens1: thermal@10ae000 {
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
- reg = <0x10ad000 0x2000>;
+ reg = <0x10ae000 0x1000>, /* TM */
+ <0x10ad000 0x1000>; /* SROT */
#qcom,sensors = <8>;
#thermal-sensor-cells = <1>;
@@ -889,7 +1041,7 @@
blsp2_i2c5: i2c@c1ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x0c175000 0x600>;
+ reg = <0x0c1ba000 0x600>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
@@ -983,6 +1135,75 @@
redistributor-stride = <0x0 0x20000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ ufshc: ufshc@1da4000 {
+ compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x01da4000 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufsphy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ power-domains = <&gcc UFS_GDSC>;
+ #reset-cells = <1>;
+
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&gcc GCC_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE1_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AHB_CLK>,
+ <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+ <&rpmcc RPM_SMD_LN_BB_CLK1>,
+ <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
+ freq-table-hz =
+ <50000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 150000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ resets = <&gcc GCC_UFS_BCR>;
+ reset-names = "rst";
+ };
+
+ ufsphy: phy@1da7000 {
+ compatible = "qcom,msm8998-qmp-ufs-phy";
+ reg = <0x01da7000 0x18c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clock-names =
+ "ref",
+ "ref_aux";
+ clocks =
+ <&gcc GCC_UFS_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_AUX_CLK>;
+
+ reset-names = "ufsphy";
+ resets = <&ufshc 0>;
+
+ ufsphy_lanes: lanes@1da7400 {
+ reg = <0x01da7400 0x128>,
+ <0x01da7600 0x1fc>,
+ <0x01da7c00 0x1dc>,
+ <0x01da7800 0x128>,
+ <0x01da7a00 0x1fc>;
+ #phy-cells = <0>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
index c0ddf128136c..3f97607d8baa 100644
--- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -15,6 +15,7 @@
compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8005_gpio 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 43cb5ea14089..4872f116758d 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -93,6 +93,7 @@
compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8998_gpio 0 0 26>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index 3aee10e3f921..21e05215abe4 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -14,6 +14,7 @@
compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pmi8994_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 051f57e7d6ac..23f9146a161e 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -13,6 +13,7 @@
compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pmi8998_gpio 0 0 14>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 1bb836d1e8aa..e8e186bc1ea7 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -131,4 +131,15 @@
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
};
+
+ pms405_1: pms405@1 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pms405_spmi_regulators: regulators {
+ compatible = "qcom,pms405-regulators";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
index 2c14903d808e..937eb4555ffe 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
@@ -7,5 +7,6 @@
/ {
model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
- compatible = "qcom,qcs404-evb";
+ compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb",
+ "qcom,qcs404";
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
index 11269ad3de0d..479ad3ac6c28 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -3,9 +3,92 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "qcs404-evb.dtsi"
/ {
model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
- compatible = "qcom,qcs404-evb";
+ compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb",
+ "qcom,qcs404";
+};
+
+&ethernet {
+ status = "ok";
+
+ snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 10000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet_defaults>;
+
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii";
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ device_type = "ethernet-phy";
+ reg = <0x4>;
+ };
+ };
+};
+
+&tlmm {
+ ethernet_defaults: ethernet-defaults {
+ int {
+ pins = "gpio61";
+ function = "rgmii_int";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ mdc {
+ pins = "gpio76";
+ function = "rgmii_mdc";
+ bias-pull-up;
+ };
+ mdio {
+ pins = "gpio75";
+ function = "rgmii_mdio";
+ bias-pull-up;
+ };
+ tx {
+ pins = "gpio67", "gpio66", "gpio65", "gpio64";
+ function = "rgmii_tx";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ rx {
+ pins = "gpio73", "gpio72", "gpio71", "gpio70";
+ function = "rgmii_rx";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ tx-ctl {
+ pins = "gpio68";
+ function = "rgmii_ctl";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ rx-ctl {
+ pins = "gpio74";
+ function = "rgmii_ctl";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ tx-ck {
+ pins = "gpio63";
+ function = "rgmii_ck";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ rx-ck {
+ pins = "gpio69";
+ function = "rgmii_ck";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 50b3589c7f15..2c3127167e3c 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -7,6 +7,7 @@
/ {
aliases {
serial0 = &blsp1_uart2;
+ serial1 = &blsp1_uart3;
};
chosen {
@@ -19,6 +20,52 @@
regulator-always-on;
regulator-boot-on;
};
+
+ vdd_ch0_3p3:
+ vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "eSMPS3_3P3";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+ vddio-supply = <&vreg_l6_1p8>;
+ vddxo-supply = <&vreg_l5_1p8>;
+ vddrf-supply = <&vreg_l1_1p3>;
+ vddch0-supply = <&vdd_ch0_3p3>;
+
+ local-bd-address = [ 02 00 00 00 5a ad ];
+
+ max-speed = <3200000>;
+ };
+};
+
+&blsp1_dma {
+ qcom,controlled-remotely;
+};
+
+&blsp2_dma {
+ qcom,controlled-remotely;
+};
+
+&pms405_spmi_regulators {
+ vdd_s3-supply = <&pms405_s3>;
+
+ pms405_s3: s3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd_apc";
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1352000>;
+ };
};
&remoteproc_adsp {
@@ -37,18 +84,18 @@
pms405-regulators {
compatible = "qcom,rpm-pms405-regulators";
- vdd-s1-supply = <&vph_pwr>;
- vdd-s2-supply = <&vph_pwr>;
- vdd-s3-supply = <&vph_pwr>;
- vdd-s4-supply = <&vph_pwr>;
- vdd-s5-supply = <&vph_pwr>;
- vdd-l1-l2-supply = <&vreg_s5_1p35>;
- vdd-l3-l8-supply = <&vreg_s5_1p35>;
- vdd-l4-supply = <&vreg_s5_1p35>;
- vdd-l5-l6-supply = <&vreg_s4_1p8>;
- vdd-l7-supply = <&vph_pwr>;
- vdd-l9-supply = <&vreg_s5_1p35>;
- vdd-l10-l11-l12-l13-supply = <&vph_pwr>;
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_l1_l2-supply = <&vreg_s5_1p35>;
+ vdd_l3_l8-supply = <&vreg_s5_1p35>;
+ vdd_l4-supply = <&vreg_s5_1p35>;
+ vdd_l5_l6-supply = <&vreg_s4_1p8>;
+ vdd_l7-supply = <&vph_pwr>;
+ vdd_l9-supply = <&vreg_s5_1p35>;
+ vdd_l10_l11_l12_l13-supply = <&vph_pwr>;
vreg_s4_1p8: s4 {
regulator-min-microvolt = <1728000>;
@@ -56,8 +103,8 @@
};
vreg_s5_1p35: s5 {
- regulator-min-microvolt = <>;
- regulator-max-microvolt = <>;
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
};
vreg_l1_1p3: l1 {
@@ -71,7 +118,7 @@
};
vreg_l3_1p05: l3 {
- regulator-min-microvolt = <976000>;
+ regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1160000>;
};
@@ -205,3 +252,21 @@
bias-disable;
};
};
+
+&blsp1_uart3_default {
+ cts {
+ pins = "gpio84";
+ bias-disable;
+ };
+
+ rts-tx {
+ pins = "gpio85", "gpio82";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio83";
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index e8fd26633d57..ffedf9640af7 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -435,7 +435,6 @@
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
- qcom,controlled-remotely = <1>;
qcom,ee = <0>;
status = "okay";
};
@@ -479,6 +478,27 @@
status = "okay";
};
+ ethernet: ethernet@7a80000 {
+ compatible = "qcom,qcs404-ethqos";
+ reg = <0x07a80000 0x10000>,
+ <0x07a96000 0x100>;
+ reg-names = "stmmaceth", "rgmii";
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+ clocks = <&gcc GCC_ETH_AXI_CLK>,
+ <&gcc GCC_ETH_SLAVE_AHB_CLK>,
+ <&gcc GCC_ETH_PTP_CLK>,
+ <&gcc GCC_ETH_RGMII_CLK>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+
+ snps,tso;
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <4096>;
+
+ status = "disabled";
+ };
+
wifi: wifi@a000000 {
compatible = "qcom,wcn3990-wifi";
reg = <0xa000000 0x800000>;
@@ -659,7 +679,6 @@
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
- qcom,controlled-remotely = <1>;
qcom,ee = <0>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index af8c6a2445a2..02b8357c8ce8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -48,6 +48,10 @@
};
};
+&adsp_pas {
+ status = "okay";
+};
+
&apps_rsc {
pm8998-rpmh-regulators {
compatible = "qcom,pm8998-rpmh-regulators";
@@ -344,6 +348,10 @@
};
};
+&cdsp_pas {
+ status = "okay";
+};
+
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 5308f1671824..dd67f9c5cb43 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -11,8 +11,10 @@
#include <dt-bindings/clock/qcom,lpass-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -73,29 +75,78 @@
#size-cells = <2>;
ranges;
- memory@85fc0000 {
+ hyp_mem: memory@85700000 {
+ reg = <0 0x85700000 0 0x600000>;
+ no-map;
+ };
+
+ xbl_mem: memory@85e00000 {
+ reg = <0 0x85e00000 0 0x100000>;
+ no-map;
+ };
+
+ aop_mem: memory@85fc0000 {
reg = <0 0x85fc0000 0 0x20000>;
no-map;
};
- memory@85fe0000 {
+ aop_cmd_db_mem: memory@85fe0000 {
compatible = "qcom,cmd-db";
- reg = <0x0 0x85fe0000 0x0 0x20000>;
+ reg = <0x0 0x85fe0000 0 0x20000>;
no-map;
};
smem_mem: memory@86000000 {
- reg = <0x0 0x86000000 0x0 0x200000>;
+ reg = <0x0 0x86000000 0 0x200000>;
no-map;
};
- memory@86200000 {
+ tz_mem: memory@86200000 {
reg = <0 0x86200000 0 0x2d00000>;
no-map;
};
- wlan_msa_mem: memory@96700000 {
- reg = <0 0x96700000 0 0x100000>;
+ rmtfs_mem: memory@88f00000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0x88f00000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
+ qseecom_mem: memory@8ab00000 {
+ reg = <0 0x8ab00000 0 0x1400000>;
+ no-map;
+ };
+
+ camera_mem: memory@8bf00000 {
+ reg = <0 0x8bf00000 0 0x500000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@8c400000 {
+ reg = <0 0x8c400000 0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@8c410000 {
+ reg = <0 0x8c410000 0 0x5000>;
+ no-map;
+ };
+
+ gpu_mem: memory@8c415000 {
+ reg = <0 0x8c415000 0 0x2000>;
+ no-map;
+ };
+
+ adsp_mem: memory@8c500000 {
+ reg = <0 0x8c500000 0 0x1a00000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8df00000 {
+ reg = <0 0x8df00000 0 0x100000>;
no-map;
};
@@ -104,10 +155,30 @@
no-map;
};
+ venus_mem: memory@95800000 {
+ reg = <0 0x95800000 0 0x500000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@95d00000 {
+ reg = <0 0x95d00000 0 0x800000>;
+ no-map;
+ };
+
mba_region: memory@96500000 {
reg = <0 0x96500000 0 0x200000>;
no-map;
};
+
+ slpi_mem: memory@96700000 {
+ reg = <0 0x96700000 0 0x1400000>;
+ no-map;
+ };
+
+ spss_mem: memory@97b00000 {
+ reg = <0 0x97b00000 0 0x100000>;
+ no-map;
+ };
};
cpus {
@@ -264,6 +335,64 @@
};
};
+ adsp_pas: remoteproc-adsp {
+ compatible = "qcom,sdm845-adsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ mboxes = <&apss_shared 8>;
+ };
+ };
+
+ cdsp_pas: remoteproc-cdsp {
+ compatible = "qcom,sdm845-cdsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ memory-region = <&cdsp_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+ label = "turing";
+ qcom,remote-pid = <5>;
+ mboxes = <&apss_shared 4>;
+ };
+ };
+
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_regs 0 0x1000>;
@@ -1033,6 +1162,7 @@
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_PHY_GDSC>;
+ #reset-cells = <1>;
iommus = <&apps_smmu 0x100 0xf>;
@@ -1078,6 +1208,8 @@
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
status = "disabled";
ufs_mem_phy_lanes: lanes@1d87400 {
@@ -2098,43 +2230,43 @@
compatible = "operating-points-v2";
rpmhpd_opp_ret: opp1 {
- opp-level = <16>;
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
};
rpmhpd_opp_min_svs: opp2 {
- opp-level = <48>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
rpmhpd_opp_low_svs: opp3 {
- opp-level = <64>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
};
rpmhpd_opp_svs: opp4 {
- opp-level = <128>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
};
rpmhpd_opp_svs_l1: opp5 {
- opp-level = <192>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
rpmhpd_opp_nom: opp6 {
- opp-level = <256>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
rpmhpd_opp_nom_l1: opp7 {
- opp-level = <320>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
rpmhpd_opp_nom_l2: opp8 {
- opp-level = <336>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
};
rpmhpd_opp_turbo: opp9 {
- opp-level = <384>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
rpmhpd_opp_turbo_l1: opp10 {
- opp-level = <416>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
@@ -2611,5 +2743,210 @@
};
};
};
+
+ aoss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cluster0_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster0_crit: cluster0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cluster1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster1_crit: cluster1_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ q6_modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ wlan_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-hvx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6_hvx_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ video_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
};
};
generated by cgit (git 2.34.1) at 2024-05-02 02:10:01 +0000