diff options
| -rw-r--r-- | Documentation/hwmon/gigabyte_waterforce.rst | 47 | ||||
| -rw-r--r-- | Documentation/hwmon/index.rst | 1 | ||||
| -rw-r--r-- | MAINTAINERS | 7 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/gigabyte_waterforce.c | 428 |
6 files changed, 494 insertions, 0 deletions
diff --git a/Documentation/hwmon/gigabyte_waterforce.rst b/Documentation/hwmon/gigabyte_waterforce.rst new file mode 100644 index 000000000000..d47f3e8516ee --- /dev/null +++ b/Documentation/hwmon/gigabyte_waterforce.rst @@ -0,0 +1,47 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver gigabyte_waterforce +================================= + +Supported devices: + +* Gigabyte AORUS WATERFORCE X240 +* Gigabyte AORUS WATERFORCE X280 +* Gigabyte AORUS WATERFORCE X360 + +Author: Aleksa Savic + +Description +----------- + +This driver enables hardware monitoring support for the listed Gigabyte Waterforce +all-in-one CPU liquid coolers. Available sensors are pump and fan speed in RPM, as +well as coolant temperature. Also available through debugfs is the firmware version. + +Attaching a fan is optional and allows it to be controlled from the device. If +it's not connected, the fan-related sensors will report zeroes. + +The addressable RGB LEDs and LCD screen are not supported in this driver and should +be controlled through userspace tools. + +Usage notes +----------- + +As these are USB HIDs, the driver can be loaded automatically by the kernel and +supports hot swapping. + +Sysfs entries +------------- + +=========== ============================================= +fan1_input Fan speed (in rpm) +fan2_input Pump speed (in rpm) +temp1_input Coolant temperature (in millidegrees Celsius) +=========== ============================================= + +Debugfs entries +--------------- + +================ ======================= +firmware_version Device firmware version +================ ======================= diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index f85f2ac5af45..30e1c24307ca 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -73,6 +73,7 @@ Hardware Monitoring Kernel Drivers ftsteutates g760a g762 + gigabyte_waterforce gsc-hwmon gl518sm gxp-fan-ctrl diff --git a/MAINTAINERS b/MAINTAINERS index 30a8524b4fc0..a0677e35c9b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8916,6 +8916,13 @@ F: Documentation/filesystems/gfs2* F: fs/gfs2/ F: include/uapi/linux/gfs2_ondisk.h +GIGABYTE WATERFORCE SENSOR DRIVER +M: Aleksa Savic <savicaleksa83@gmail.com> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/gigabyte_waterforce.rst +F: drivers/hwmon/gigabyte_waterforce.c + GIGABYTE WMI DRIVER M: Thomas Weißschuh <thomas@weissschuh.net> L: platform-driver-x86@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 76cb05db1dcf..a608264da87d 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -664,6 +664,16 @@ config SENSORS_FTSTEUTATES This driver can also be built as a module. If so, the module will be called ftsteutates. +config SENSORS_GIGABYTE_WATERFORCE + tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called gigabyte_waterforce. + config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index e84bd9685b5c..47be39af5c03 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -80,6 +80,7 @@ obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o obj-$(CONFIG_SENSORS_FTSTEUTATES) += ftsteutates.o obj-$(CONFIG_SENSORS_G760A) += g760a.o obj-$(CONFIG_SENSORS_G762) += g762.o +obj-$(CONFIG_SENSORS_GIGABYTE_WATERFORCE) += gigabyte_waterforce.o obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o obj-$(CONFIG_SENSORS_GSC) += gsc-hwmon.o diff --git a/drivers/hwmon/gigabyte_waterforce.c b/drivers/hwmon/gigabyte_waterforce.c new file mode 100644 index 000000000000..1799377fc2f1 --- /dev/null +++ b/drivers/hwmon/gigabyte_waterforce.c @@ -0,0 +1,428 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * hwmon driver for Gigabyte AORUS Waterforce AIO CPU coolers: X240, X280 and X360. + * + * Copyright 2023 Aleksa Savic <savicaleksa83@gmail.com> + */ + +#include <linux/debugfs.h> +#include <linux/hid.h> +#include <linux/hwmon.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <asm/unaligned.h> + +#define DRIVER_NAME "gigabyte_waterforce" + +#define USB_VENDOR_ID_GIGABYTE 0x1044 +#define USB_PRODUCT_ID_WATERFORCE 0x7a4d /* Gigabyte AORUS WATERFORCE X240, X280 and X360 */ + +#define STATUS_VALIDITY (2 * 1000) /* ms */ +#define MAX_REPORT_LENGTH 6144 + +#define WATERFORCE_TEMP_SENSOR 0xD +#define WATERFORCE_FAN_SPEED 0x02 +#define WATERFORCE_PUMP_SPEED 0x05 +#define WATERFORCE_FAN_DUTY 0x08 +#define WATERFORCE_PUMP_DUTY 0x09 + +/* Control commands, inner offsets and lengths */ +static const u8 get_status_cmd[] = { 0x99, 0xDA }; + +#define FIRMWARE_VER_START_OFFSET_1 2 +#define FIRMWARE_VER_START_OFFSET_2 3 +static const u8 get_firmware_ver_cmd[] = { 0x99, 0xD6 }; + +/* Command lengths */ +#define GET_STATUS_CMD_LENGTH 2 +#define GET_FIRMWARE_VER_CMD_LENGTH 2 + +static const char *const waterforce_temp_label[] = { + "Coolant temp" +}; + +static const char *const waterforce_speed_label[] = { + "Fan speed", + "Pump speed" +}; + +struct waterforce_data { + struct hid_device *hdev; + struct device *hwmon_dev; + struct dentry *debugfs; + /* For locking access to buffer */ + struct mutex buffer_lock; + /* For queueing multiple readers */ + struct mutex status_report_request_mutex; + /* For reinitializing the completion below */ + spinlock_t status_report_request_lock; + struct completion status_report_received; + struct completion fw_version_processed; + + /* Sensor data */ + s32 temp_input[1]; + u16 speed_input[2]; /* Fan and pump speed in RPM */ + u8 duty_input[2]; /* Fan and pump duty in 0-100% */ + + u8 *buffer; + int firmware_version; + unsigned long updated; /* jiffies */ +}; + +static umode_t waterforce_is_visible(const void *data, + enum hwmon_sensor_types type, u32 attr, int channel) +{ + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_label: + case hwmon_temp_input: + return 0444; + default: + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_label: + case hwmon_fan_input: + return 0444; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + return 0444; + default: + break; + } + break; + default: + break; + } + + return 0; +} + +/* Writes the command to the device with the rest of the report filled with zeroes */ +static int waterforce_write_expanded(struct waterforce_data *priv, const u8 *cmd, int cmd_length) +{ + int ret; + + mutex_lock(&priv->buffer_lock); + + memcpy_and_pad(priv->buffer, MAX_REPORT_LENGTH, cmd, cmd_length, 0x00); + ret = hid_hw_output_report(priv->hdev, priv->buffer, MAX_REPORT_LENGTH); + + mutex_unlock(&priv->buffer_lock); + return ret; +} + +static int waterforce_get_status(struct waterforce_data *priv) +{ + int ret = mutex_lock_interruptible(&priv->status_report_request_mutex); + + if (ret < 0) + return ret; + + if (!time_after(jiffies, priv->updated + msecs_to_jiffies(STATUS_VALIDITY))) { + /* Data is up to date */ + goto unlock_and_return; + } + + /* + * Disable raw event parsing for a moment to safely reinitialize the + * completion. Reinit is done because hidraw could have triggered + * the raw event parsing and marked the priv->status_report_received + * completion as done. + */ + spin_lock_bh(&priv->status_report_request_lock); + reinit_completion(&priv->status_report_received); + spin_unlock_bh(&priv->status_report_request_lock); + + /* Send command for getting status */ + ret = waterforce_write_expanded(priv, get_status_cmd, GET_STATUS_CMD_LENGTH); + if (ret < 0) + return ret; + + ret = wait_for_completion_interruptible_timeout(&priv->status_report_received, + msecs_to_jiffies(STATUS_VALIDITY)); + if (ret == 0) + ret = -ETIMEDOUT; + +unlock_and_return: + mutex_unlock(&priv->status_report_request_mutex); + if (ret < 0) + return ret; + + return 0; +} + +static int waterforce_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct waterforce_data *priv = dev_get_drvdata(dev); + int ret = waterforce_get_status(priv); + + if (ret < 0) + return ret; + + switch (type) { + case hwmon_temp: + *val = priv->temp_input[channel]; + break; + case hwmon_fan: + *val = priv->speed_input[channel]; + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + *val = DIV_ROUND_CLOSEST(priv->duty_input[channel] * 255, 100); + break; + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; /* unreachable */ + } + + return 0; +} + +static int waterforce_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + switch (type) { + case hwmon_temp: + *str = waterforce_temp_label[channel]; + break; + case hwmon_fan: + *str = waterforce_speed_label[channel]; + break; + default: + return -EOPNOTSUPP; /* unreachable */ + } + + return 0; +} + +static int waterforce_get_fw_ver(struct hid_device *hdev) +{ + struct waterforce_data *priv = hid_get_drvdata(hdev); + int ret; + + ret = waterforce_write_expanded(priv, get_firmware_ver_cmd, GET_FIRMWARE_VER_CMD_LENGTH); + if (ret < 0) + return ret; + + ret = wait_for_completion_interruptible_timeout(&priv->fw_version_processed, + msecs_to_jiffies(STATUS_VALIDITY)); + if (ret == 0) + return -ETIMEDOUT; + else if (ret < 0) + return ret; + + return 0; +} + +static const struct hwmon_ops waterforce_hwmon_ops = { + .is_visible = waterforce_is_visible, + .read = waterforce_read, + .read_string = waterforce_read_string +}; + +static const struct hwmon_channel_info *waterforce_info[] = { + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_LABEL), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT), + NULL +}; + +static const struct hwmon_chip_info waterforce_chip_info = { + .ops = &waterforce_hwmon_ops, + .info = waterforce_info, +}; + +static int waterforce_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, + int size) +{ + struct waterforce_data *priv = hid_get_drvdata(hdev); + + if (data[0] == get_firmware_ver_cmd[0] && data[1] == get_firmware_ver_cmd[1]) { + /* Received a firmware version report */ + priv->firmware_version = + data[FIRMWARE_VER_START_OFFSET_1] * 10 + data[FIRMWARE_VER_START_OFFSET_2]; + + if (!completion_done(&priv->fw_version_processed)) + complete_all(&priv->fw_version_processed); + return 0; + } + + if (data[0] != get_status_cmd[0] || data[1] != get_status_cmd[1]) + return 0; + + priv->temp_input[0] = data[WATERFORCE_TEMP_SENSOR] * 1000; + priv->speed_input[0] = get_unaligned_le16(data + WATERFORCE_FAN_SPEED); + priv->speed_input[1] = get_unaligned_le16(data + WATERFORCE_PUMP_SPEED); + priv->duty_input[0] = data[WATERFORCE_FAN_DUTY]; + priv->duty_input[1] = data[WATERFORCE_PUMP_DUTY]; + + if (!completion_done(&priv->status_report_received)) + complete_all(&priv->status_report_received); + + priv->updated = jiffies; + + return 0; +} + +static int firmware_version_show(struct seq_file *seqf, void *unused) +{ + struct waterforce_data *priv = seqf->private; + + seq_printf(seqf, "%u\n", priv->firmware_version); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(firmware_version); + +static void waterforce_debugfs_init(struct waterforce_data *priv) +{ + char name[64]; + + if (!priv->firmware_version) + return; /* There's nothing to show in debugfs */ + + scnprintf(name, sizeof(name), "%s-%s", DRIVER_NAME, dev_name(&priv->hdev->dev)); + + priv->debugfs = debugfs_create_dir(name, NULL); + debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops); +} + +static int waterforce_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + struct waterforce_data *priv; + int ret; + + priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->hdev = hdev; + hid_set_drvdata(hdev, priv); + + /* + * Initialize priv->updated to STATUS_VALIDITY seconds in the past, making + * the initial empty data invalid for waterforce_read() without the need for + * a special case there. + */ + priv->updated = jiffies - msecs_to_jiffies(STATUS_VALIDITY); + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "hid parse failed with %d\n", ret); + return ret; + } + + /* + * Enable hidraw so existing user-space tools can continue to work. + */ + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + if (ret) { + hid_err(hdev, "hid hw start failed with %d\n", ret); + return ret; + } + + ret = hid_hw_open(hdev); + if (ret) { + hid_err(hdev, "hid hw open failed with %d\n", ret); + goto fail_and_stop; + } + + priv->buffer = devm_kzalloc(&hdev->dev, MAX_REPORT_LENGTH, GFP_KERNEL); + if (!priv->buffer) { + ret = -ENOMEM; + goto fail_and_close; + } + + mutex_init(&priv->status_report_request_mutex); + mutex_init(&priv->buffer_lock); + spin_lock_init(&priv->status_report_request_lock); + init_completion(&priv->status_report_received); + init_completion(&priv->fw_version_processed); + + hid_device_io_start(hdev); + ret = waterforce_get_fw_ver(hdev); + if (ret < 0) + hid_warn(hdev, "fw version request failed with %d\n", ret); + + priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "waterforce", + priv, &waterforce_chip_info, NULL); + if (IS_ERR(priv->hwmon_dev)) { + ret = PTR_ERR(priv->hwmon_dev); + hid_err(hdev, "hwmon registration failed with %d\n", ret); + goto fail_and_close; + } + + waterforce_debugfs_init(priv); + + return 0; + +fail_and_close: + hid_hw_close(hdev); +fail_and_stop: + hid_hw_stop(hdev); + return ret; +} + +static void waterforce_remove(struct hid_device *hdev) +{ + struct waterforce_data *priv = hid_get_drvdata(hdev); + + debugfs_remove_recursive(priv->debugfs); + hwmon_device_unregister(priv->hwmon_dev); + + hid_hw_close(hdev); + hid_hw_stop(hdev); +} + +static const struct hid_device_id waterforce_table[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_GIGABYTE, USB_PRODUCT_ID_WATERFORCE) }, + { } +}; + +MODULE_DEVICE_TABLE(hid, waterforce_table); + +static struct hid_driver waterforce_driver = { + .name = "waterforce", + .id_table = waterforce_table, + .probe = waterforce_probe, + .remove = waterforce_remove, + .raw_event = waterforce_raw_event, +}; + +static int __init waterforce_init(void) +{ + return hid_register_driver(&waterforce_driver); +} + +static void __exit waterforce_exit(void) +{ + hid_unregister_driver(&waterforce_driver); +} + +/* When compiled into the kernel, initialize after the HID bus */ +late_initcall(waterforce_init); +module_exit(waterforce_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Aleksa Savic <savicaleksa83@gmail.com>"); +MODULE_DESCRIPTION("Hwmon driver for Gigabyte AORUS Waterforce AIO coolers"); |