diff options
| -rw-r--r-- | arch/blackfin/kernel/bfin_dma_5xx.c | 32 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/Kconfig | 59 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/dma.h | 28 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/irq.h | 4 |
4 files changed, 102 insertions, 21 deletions
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 1e485dfdc9f2..6ce8dce753c9 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -84,6 +84,24 @@ static int __init proc_dma_init(void) late_initcall(proc_dma_init); #endif +static void set_dma_peripheral_map(unsigned int channel, const char *device_id) +{ +#ifdef CONFIG_BF54x + unsigned int per_map; + + switch (channel) { + case CH_UART2_RX: per_map = 0xC << 12; break; + case CH_UART2_TX: per_map = 0xD << 12; break; + case CH_UART3_RX: per_map = 0xE << 12; break; + case CH_UART3_TX: per_map = 0xF << 12; break; + default: return; + } + + if (strncmp(device_id, "BFIN_UART", 9) == 0) + dma_ch[channel].regs->peripheral_map = per_map; +#endif +} + /** * request_dma - request a DMA channel * @@ -111,19 +129,7 @@ int request_dma(unsigned int channel, const char *device_id) return -EBUSY; } -#ifdef CONFIG_BF54x - if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) { - unsigned int per_map; - per_map = dma_ch[channel].regs->peripheral_map & 0xFFF; - if (strncmp(device_id, "BFIN_UART", 9) == 0) - dma_ch[channel].regs->peripheral_map = per_map | - ((channel - CH_UART2_RX + 0xC)<<12); - else - dma_ch[channel].regs->peripheral_map = per_map | - ((channel - CH_UART2_RX + 0x6)<<12); - } -#endif - + set_dma_peripheral_map(channel, device_id); dma_ch[channel].device_id = device_id; dma_ch[channel].irq = 0; diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index 70189a0d1a19..94acb586832e 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -42,6 +42,65 @@ config BF548_ATAPI_ALTERNATIVE_PORT async address or GPIO port F and G. Select y to route it to GPIO. +choice + prompt "UART2 DMA channel selection" + depends on SERIAL_BFIN_UART2 + default UART2_DMA_RX_ON_DMA18 + help + UART2 DMA channel selection + RX -> DMA18 + TX -> DMA19 + or + RX -> DMA13 + TX -> DMA14 + +config UART2_DMA_RX_ON_DMA18 + bool "UART2 DMA RX -> DMA18 TX -> DMA19" + help + UART2 DMA channel assignment + RX -> DMA18 + TX -> DMA19 + use SPORT2 default DMA channel + +config UART2_DMA_RX_ON_DMA13 + bool "UART2 DMA RX -> DMA13 TX -> DMA14" + help + UART2 DMA channel assignment + RX -> DMA13 + TX -> DMA14 + use EPPI1 EPPI2 default DMA channel +endchoice + +choice + prompt "UART3 DMA channel selection" + depends on SERIAL_BFIN_UART3 + default UART3_DMA_RX_ON_DMA20 + help + UART3 DMA channel selection + RX -> DMA20 + TX -> DMA21 + or + RX -> DMA15 + TX -> DMA16 + +config UART3_DMA_RX_ON_DMA20 + bool "UART3 DMA RX -> DMA20 TX -> DMA21" + help + UART3 DMA channel assignment + RX -> DMA20 + TX -> DMA21 + use SPORT3 default DMA channel + +config UART3_DMA_RX_ON_DMA15 + bool "UART3 DMA RX -> DMA15 TX -> DMA16" + help + UART3 DMA channel assignment + RX -> DMA15 + TX -> DMA16 + use PIXC default DMA channel + +endchoice + comment "Interrupt Priority Assignment" menu "Priority" diff --git a/arch/blackfin/mach-bf548/include/mach/dma.h b/arch/blackfin/mach-bf548/include/mach/dma.h index a30d242c7398..1a1091b071fd 100644 --- a/arch/blackfin/mach-bf548/include/mach/dma.h +++ b/arch/blackfin/mach-bf548/include/mach/dma.h @@ -27,17 +27,37 @@ #define CH_PIXC_OVERLAY 16 #define CH_PIXC_OUTPUT 17 #define CH_SPORT2_RX 18 -#define CH_UART2_RX 18 #define CH_SPORT2_TX 19 -#define CH_UART2_TX 19 #define CH_SPORT3_RX 20 -#define CH_UART3_RX 20 #define CH_SPORT3_TX 21 -#define CH_UART3_TX 21 #define CH_SDH 22 #define CH_NFC 22 #define CH_SPI2 23 +#if defined(CONFIG_UART2_DMA_RX_ON_DMA13) +#define CH_UART2_RX 13 +#define IRQ_UART2_RX BFIN_IRQ(37) /* UART2 RX USE EPP1 (DMA13) Interrupt */ +#define CH_UART2_TX 14 +#define IRQ_UART2_TX BFIN_IRQ(38) /* UART2 RX USE EPP1 (DMA14) Interrupt */ +#else /* Default USE SPORT2's DMA Channel */ +#define CH_UART2_RX 18 +#define IRQ_UART2_RX BFIN_IRQ(33) /* UART2 RX (DMA18) Interrupt */ +#define CH_UART2_TX 19 +#define IRQ_UART2_TX BFIN_IRQ(34) /* UART2 TX (DMA19) Interrupt */ +#endif + +#if defined(CONFIG_UART3_DMA_RX_ON_DMA15) +#define CH_UART3_RX 15 +#define IRQ_UART3_RX BFIN_IRQ(64) /* UART3 RX USE PIXC IN0 (DMA15) Interrupt */ +#define CH_UART3_TX 16 +#define IRQ_UART3_TX BFIN_IRQ(65) /* UART3 TX USE PIXC IN1 (DMA16) Interrupt */ +#else /* Default USE SPORT3's DMA Channel */ +#define CH_UART3_RX 20 +#define IRQ_UART3_RX BFIN_IRQ(35) /* UART3 RX (DMA20) Interrupt */ +#define CH_UART3_TX 21 +#define IRQ_UART3_TX BFIN_IRQ(36) /* UART3 TX (DMA21) Interrupt */ +#endif + #define CH_MEM_STREAM0_DEST 24 #define CH_MEM_STREAM0_SRC 25 #define CH_MEM_STREAM1_DEST 26 diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 99fd1b2c53d8..7f87787e7738 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -74,13 +74,9 @@ Events (highest priority) EMU 0 #define IRQ_UART2_ERROR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */ #define IRQ_CAN0_ERROR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */ #define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */ -#define IRQ_UART2_RX BFIN_IRQ(33) /* UART2 RX (DMA18) Interrupt */ #define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */ -#define IRQ_UART2_TX BFIN_IRQ(34) /* UART2 TX (DMA19) Interrupt */ #define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */ -#define IRQ_UART3_RX BFIN_IRQ(35) /* UART3 RX (DMA20) Interrupt */ #define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */ -#define IRQ_UART3_TX BFIN_IRQ(36) /* UART3 TX (DMA21) Interrupt */ #define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */ #define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */ #define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */ |