summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/fb/vt8623fb.txt64
-rw-r--r--drivers/video/Kconfig14
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/vt8623fb.c926
4 files changed, 1005 insertions, 0 deletions
diff --git a/Documentation/fb/vt8623fb.txt b/Documentation/fb/vt8623fb.txt
new file mode 100644
index 000000000000..f654576c56b7
--- /dev/null
+++ b/Documentation/fb/vt8623fb.txt
@@ -0,0 +1,64 @@
+
+ vt8623fb - fbdev driver for graphics core in VIA VT8623 chipset
+ ===============================================================
+
+
+Supported Hardware
+==================
+
+ VIA VT8623 [CLE266] chipset and its graphics core
+ (known as CastleRock or Unichrome)
+
+I tested vt8623fb on VIA EPIA ML-6000
+
+
+Supported Features
+==================
+
+ * 4 bpp pseudocolor modes (with 18bit palette, two variants)
+ * 8 bpp pseudocolor mode (with 18bit palette)
+ * 16 bpp truecolor mode (RGB 565)
+ * 32 bpp truecolor mode (RGB 888)
+ * text mode (activated by bpp = 0)
+ * doublescan mode variant (not available in text mode)
+ * panning in both directions
+ * suspend/resume support
+ * DPMS support
+
+Text mode is supported even in higher resolutions, but there is limitation to
+lower pixclocks (maximum about 100 MHz). This limitation is not enforced by
+driver. Text mode supports 8bit wide fonts only (hardware limitation) and
+16bit tall fonts (driver limitation).
+
+There are two 4 bpp modes. First mode (selected if nonstd == 0) is mode with
+packed pixels, high nibble first. Second mode (selected if nonstd == 1) is mode
+with interleaved planes (1 byte interleave), MSB first. Both modes support
+8bit wide fonts only (driver limitation).
+
+Suspend/resume works on systems that initialize video card during resume and
+if device is active (for example used by fbcon).
+
+
+Missing Features
+================
+(alias TODO list)
+
+ * secondary (not initialized by BIOS) device support
+ * MMIO support
+ * interlaced mode variant
+ * support for fontwidths != 8 in 4 bpp modes
+ * support for fontheight != 16 in text mode
+ * hardware cursor
+ * video overlay support
+ * vsync synchronization
+ * acceleration support (8514-like 2D, busmaster transfers)
+
+
+Known bugs
+==========
+
+ * cursor disable in text mode doesn't work
+
+
+--
+Ondrej Zajicek <santiago@crfreenet.org>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1132ba5ff391..7e5010dcaff5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1348,6 +1348,20 @@ config FB_VOODOO1
Please read the <file:Documentation/fb/README-sstfb.txt> for supported
options and other important info support.
+config FB_VT8623
+ tristate "VIA VT8623 support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for CastleRock integrated graphics core in the
+ VIA VT8623 [Apollo CLE266] chipset.
+
config FB_CYBLA
tristate "Cyberblade/i1 support"
depends on FB && PCI && X86_32 && !64BIT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index a916c204274f..c0c61468094d 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
obj-$(CONFIG_FB_CT65550) += chipsfb.o
obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_FM2) += fm2fb.o
+obj-$(CONFIG_FB_VT8623) += vt8623fb.o
obj-$(CONFIG_FB_CYBLA) += cyblafb.o
obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
obj-$(CONFIG_FB_LE80578) += vermilion/
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
new file mode 100644
index 000000000000..8883b6f36a7a
--- /dev/null
+++ b/drivers/video/vt8623fb.c
@@ -0,0 +1,926 @@
+/*
+ * linux/drivers/video/vt8623fb.c - fbdev driver for
+ * integrated graphic core in VIA VT8623 [CLE266] chipset
+ *
+ * Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Code is based on s3fb, some parts are from David Boucher's viafb
+ * (http://davesdomain.org.uk/viafb/)
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/svga.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/console.h> /* Why should fb driver call console functions? because acquire_console_sem() */
+#include <video/vga.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+struct vt8623fb_info {
+ char __iomem *mmio_base;
+ int mtrr_reg;
+ struct vgastate state;
+ struct mutex open_lock;
+ unsigned int ref_count;
+ u32 pseudo_palette[16];
+};
+
+
+
+/* ------------------------------------------------------------------------- */
+
+static const struct svga_fb_format vt8623fb_formats[] = {
+ { 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP8, FB_VISUAL_PSEUDOCOLOR, 16, 16},
+ { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 16, 16},
+ { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 1,
+ FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 16, 16},
+ { 8, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 8},
+/* {16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0,
+ FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 4, 4}, */
+ {16, {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, 0,
+ FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 4, 4},
+ {32, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
+ FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 2},
+ SVGA_FORMAT_END
+};
+
+static const struct svga_pll vt8623_pll = {2, 127, 2, 7, 0, 3,
+ 60000, 300000, 14318};
+
+/* CRT timing register sets */
+
+struct vga_regset vt8623_h_total_regs[] = {{0x00, 0, 7}, {0x36, 3, 3}, VGA_REGSET_END};
+struct vga_regset vt8623_h_display_regs[] = {{0x01, 0, 7}, VGA_REGSET_END};
+struct vga_regset vt8623_h_blank_start_regs[] = {{0x02, 0, 7}, VGA_REGSET_END};
+struct vga_regset vt8623_h_blank_end_regs[] = {{0x03, 0, 4}, {0x05, 7, 7}, {0x33, 5, 5}, VGA_REGSET_END};
+struct vga_regset vt8623_h_sync_start_regs[] = {{0x04, 0, 7}, {0x33, 4, 4}, VGA_REGSET_END};
+struct vga_regset vt8623_h_sync_end_regs[] = {{0x05, 0, 4}, VGA_REGSET_END};
+
+struct vga_regset vt8623_v_total_regs[] = {{0x06, 0, 7}, {0x07, 0, 0}, {0x07, 5, 5}, {0x35, 0, 0}, VGA_REGSET_END};
+struct vga_regset vt8623_v_display_regs[] = {{0x12, 0, 7}, {0x07, 1, 1}, {0x07, 6, 6}, {0x35, 2, 2}, VGA_REGSET_END};
+struct vga_regset vt8623_v_blank_start_regs[] = {{0x15, 0, 7}, {0x07, 3, 3}, {0x09, 5, 5}, {0x35, 3, 3}, VGA_REGSET_END};
+struct vga_regset vt8623_v_blank_end_regs[] = {{0x16, 0, 7}, VGA_REGSET_END};
+struct vga_regset vt8623_v_sync_start_regs[] = {{0x10, 0, 7}, {0x07, 2, 2}, {0x07, 7, 7}, {0x35, 1, 1}, VGA_REGSET_END};
+struct vga_regset vt8623_v_sync_end_regs[] = {{0x11, 0, 3}, VGA_REGSET_END};
+
+struct vga_regset vt8623_offset_regs[] = {{0x13, 0, 7}, {0x35, 5, 7}, VGA_REGSET_END};
+struct vga_regset vt8623_line_compare_regs[] = {{0x18, 0, 7}, {0x07, 4, 4}, {0x09, 6, 6}, {0x33, 0, 2}, {0x35, 4, 4}, VGA_REGSET_END};
+struct vga_regset vt8623_fetch_count_regs[] = {{0x1C, 0, 7}, {0x1D, 0, 1}, VGA_REGSET_END};
+struct vga_regset vt8623_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x34, 0, 7}, {0x48, 0, 1}, VGA_REGSET_END};
+
+struct svga_timing_regs vt8623_timing_regs = {
+ vt8623_h_total_regs, vt8623_h_display_regs, vt8623_h_blank_start_regs,
+ vt8623_h_blank_end_regs, vt8623_h_sync_start_regs, vt8623_h_sync_end_regs,
+ vt8623_v_total_regs, vt8623_v_display_regs, vt8623_v_blank_start_regs,
+ vt8623_v_blank_end_regs, vt8623_v_sync_start_regs, vt8623_v_sync_end_regs,
+};
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/* Module parameters */
+
+static char *mode = "640x480-8@60";
+
+#ifdef CONFIG_MTRR
+static int mtrr = 1;
+#endif
+
+MODULE_AUTHOR("(c) 2006 Ondrej Zajicek <santiago@crfreenet.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("fbdev driver for integrated graphics core in VIA VT8623 [CLE266]");
+
+module_param(mode, charp, 0644);
+MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc)");
+
+#ifdef CONFIG_MTRR
+module_param(mtrr, int, 0444);
+MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
+
+static struct fb_tile_ops vt8623fb_tile_ops = {
+ .fb_settile = svga_settile,
+ .fb_tilecopy = svga_tilecopy,
+ .fb_tilefill = svga_tilefill,
+ .fb_tileblit = svga_tileblit,
+ .fb_tilecursor = svga_tilecursor,
+ .fb_get_tilemax = svga_get_tilemax,
+};
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/* image data is MSB-first, fb structure is MSB-first too */
+static inline u32 expand_color(u32 c)
+{
+ return ((c & 1) | ((c & 2) << 7) | ((c & 4) << 14) | ((c & 8) << 21)) * 0xFF;
+}
+
+/* vt8623fb_iplan_imageblit silently assumes that almost everything is 8-pixel aligned */
+static void vt8623fb_iplan_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ u32 fg = expand_color(image->fg_color);
+ u32 bg = expand_color(image->bg_color);
+ const u8 *src1, *src;
+ u8 __iomem *dst1;
+ u32 __iomem *dst;
+ u32 val;
+ int x, y;
+
+ src1 = image->data;
+ dst1 = info->screen_base + (image->dy * info->fix.line_length)
+ + ((image->dx / 8) * 4);
+
+ for (y = 0; y < image->height; y++) {
+ src = src1;
+ dst = (u32 __iomem *) dst1;
+ for (x = 0; x < image->width; x += 8) {
+ val = *(src++) * 0x01010101;
+ val = (val & fg) | (~val & bg);
+ fb_writel(val, dst++);
+ }
+ src1 += image->width / 8;
+ dst1 += info->fix.line_length;
+ }
+}
+
+/* vt8623fb_iplan_fillrect silently assumes that almost everything is 8-pixel aligned */
+static void vt8623fb_iplan_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ u32 fg = expand_color(rect->color);
+ u8 __iomem *dst1;
+ u32 __iomem *dst;
+ int x, y;
+
+ dst1 = info->screen_base + (rect->dy * info->fix.line_length)
+ + ((rect->dx / 8) * 4);
+
+ for (y = 0; y < rect->height; y++) {
+ dst = (u32 __iomem *) dst1;
+ for (x = 0; x < rect->width; x += 8) {
+ fb_writel(fg, dst++);
+ }
+ dst1 += info->fix.line_length;
+ }
+}
+
+
+/* image data is MSB-first, fb structure is high-nibble-in-low-byte-first */
+static inline u32 expand_pixel(u32 c)
+{
+ return (((c & 1) << 24) | ((c & 2) << 27) | ((c & 4) << 14) | ((c & 8) << 17) |
+ ((c & 16) << 4) | ((c & 32) << 7) | ((c & 64) >> 6) | ((c & 128) >> 3)) * 0xF;
+}
+
+/* vt8623fb_cfb4_imageblit silently assumes that almost everything is 8-pixel aligned */
+static void vt8623fb_cfb4_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ u32 fg = image->fg_color * 0x11111111;
+ u32 bg = image->bg_color * 0x11111111;
+ const u8 *src1, *src;
+ u8 __iomem *dst1;
+ u32 __iomem *dst;
+ u32 val;
+ int x, y;
+
+ src1 = image->data;
+ dst1 = info->screen_base + (image->dy * info->fix.line_length)
+ + ((image->dx / 8) * 4);
+
+ for (y = 0; y < image->height; y++) {
+ src = src1;
+ dst = (u32 __iomem *) dst1;
+ for (x = 0; x < image->width; x += 8) {
+ val = expand_pixel(*(src++));
+ val = (val & fg) | (~val & bg);
+ fb_writel(val, dst++);
+ }
+ src1 += image->width / 8;
+ dst1 += info->fix.line_length;
+ }
+}
+
+static void vt8623fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ if ((info->var.bits_per_pixel == 4) && (image->depth == 1)
+ && ((image->width % 8) == 0) && ((image->dx % 8) == 0)) {
+ if (info->fix.type == FB_TYPE_INTERLEAVED_PLANES)
+ vt8623fb_iplan_imageblit(info, image);
+ else
+ vt8623fb_cfb4_imageblit(info, image);
+ } else
+ cfb_imageblit(info, image);
+}
+
+static void vt8623fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ if ((info->var.bits_per_pixel == 4)
+ && ((rect->width % 8) == 0) && ((rect->dx % 8) == 0)
+ && (info->fix.type == FB_TYPE_INTERLEAVED_PLANES))
+ vt8623fb_iplan_fillrect(info, rect);
+ else
+ cfb_fillrect(info, rect);
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+
+static void vt8623_set_pixclock(struct fb_info *info, u32 pixclock)
+{
+ u16 m, n, r;
+ u8 regval;
+ int rv;
+
+ rv = svga_compute_pll(&vt8623_pll, 1000000000 / pixclock, &m, &n, &r, info->node);
+ if (rv < 0) {
+ printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node);
+ return;
+ }
+
+ /* Set VGA misc register */
+ regval = vga_r(NULL, VGA_MIS_R);
+ vga_w(NULL, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD);
+
+ /* Set clock registers */
+ vga_wseq(NULL, 0x46, (n | (r << 6)));
+ vga_wseq(NULL, 0x47, m);
+
+ udelay(1000);
+
+ /* PLL reset */
+ svga_wseq_mask(0x40, 0x02, 0x02);
+ svga_wseq_mask(0x40, 0x00, 0x02);
+}
+
+
+static int vt8623fb_open(struct fb_info *info, int user)
+{
+ struct vt8623fb_info *par = info->par;
+
+ mutex_lock(&(par->open_lock));
+ if (par->ref_count == 0) {
+ memset(&(par->state), 0, sizeof(struct vgastate));
+ par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | VGA_SAVE_CMAP;
+ par->state.num_crtc = 0xA2;
+ par->state.num_seq = 0x50;
+ save_vga(&(par->state));
+ }
+
+ par->ref_count++;
+ mutex_unlock(&(par->open_lock));
+
+ return 0;
+}
+
+static int vt8623fb_release(struct fb_info *info, int user)
+{
+ struct vt8623fb_info *par = info->par;
+
+ mutex_lock(&(par->open_lock));
+ if (par->ref_count == 0) {
+ mutex_unlock(&(par->open_lock));
+ return -EINVAL;
+ }
+
+ if (par->ref_count == 1)
+ restore_vga(&(par->state));
+
+ par->ref_count--;
+ mutex_unlock(&(par->open_lock));
+
+ return 0;
+}
+
+static int vt8623fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ int rv, mem, step;
+
+ /* Find appropriate format */
+ rv = svga_match_format (vt8623fb_formats, var, NULL);
+ if (rv < 0)
+ {
+ printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node);
+ return rv;
+ }
+
+ /* Do not allow to have real resoulution larger than virtual */
+ if (var->xres > var->xres_virtual)
+ var->xres_virtual = var->xres;
+
+ if (var->yres > var->yres_virtual)
+ var->yres_virtual = var->yres;
+
+ /* Round up xres_virtual to have proper alignment of lines */
+ step = vt8623fb_formats[rv].xresstep - 1;
+ var->xres_virtual = (var->xres_virtual+step) & ~step;
+
+ /* Check whether have enough memory */
+ mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
+ if (mem > info->screen_size)
+ {
+ printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", info->node, mem >> 10, (unsigned int) (info->screen_size >> 10));
+ return -EINVAL;
+ }
+
+ /* Text mode is limited to 256 kB of memory */
+ if ((var->bits_per_pixel == 0) && (mem > (256*1024)))
+ {
+ printk(KERN_ERR "fb%d: text framebuffer size too large (%d kB requested, 256 kB possible)\n", info->node, mem >> 10);
+ return -EINVAL;
+ }
+
+ rv = svga_check_timings (&vt8623_timing_regs, var, info->node);
+ if (rv < 0)
+ {
+ printk(KERN_ERR "fb%d: invalid timings requested\n", info->node);
+ return rv;
+ }
+
+ /* Interlaced mode not supported */
+ if (var->vmode & FB_VMODE_INTERLACED)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static int vt8623fb_set_par(struct fb_info *info)
+{
+ u32 mode, offset_value, fetch_value, screen_size;
+ u32 bpp = info->var.bits_per_pixel;
+
+ if (bpp != 0) {
+ info->fix.ypanstep = 1;
+ info->fix.line_length = (info->var.xres_virtual * bpp) / 8;
+
+ info->flags &= ~FBINFO_MISC_TILEBLITTING;
+ info->tileops = NULL;
+
+ /* in 4bpp supports 8p wide tiles only, any tiles otherwise */
+ info->pixmap.blit_x = (bpp == 4) ? (1 << (8 - 1)) : (~(u32)0);
+ info->pixmap.blit_y = ~(u32)0;
+
+ offset_value = (info->var.xres_virtual * bpp) / 64;
+ fetch_value = ((info->var.xres * bpp) / 128) + 4;
+
+ if (bpp == 4)
+ fetch_value = (info->var.xres / 8) + 8; /* + 0 is OK */
+
+ screen_size = info->var.yres_virtual * info->fix.line_length;
+ } else {
+ info->fix.ypanstep = 16;
+ info->fix.line_length = 0;
+
+ info->flags |= FBINFO_MISC_TILEBLITTING;
+ info->tileops = &vt8623fb_tile_ops;
+
+ /* supports 8x16 tiles only */
+ info->pixmap.blit_x = 1 << (8 - 1);
+ info->pixmap.blit_y = 1 << (16 - 1);
+
+ offset_value = info->var.xres_virtual / 16;
+ fetch_value = (info->var.xres / 8) + 8;
+ screen_size = (info->var.xres_virtual * info->var.yres_virtual) / 64;
+ }
+
+ info->var.xoffset = 0;
+ info->var.yoffset = 0;
+ info->var.activate = FB_ACTIVATE_NOW;
+
+ /* Unlock registers */
+ svga_wseq_mask(0x10, 0x01, 0x01);
+ svga_wcrt_mask(0x11, 0x00, 0x80);
+ svga_wcrt_mask(0x47, 0x00, 0x01);
+
+ /* Device, screen and sync off */
+ svga_wseq_mask(0x01, 0x20, 0x20);
+ svga_wcrt_mask(0x36, 0x30, 0x30);
+ svga_wcrt_mask(0x17, 0x00, 0x80);
+
+ /* Set default values */
+ svga_set_default_gfx_regs();
+ svga_set_default_atc_regs();
+ svga_set_default_seq_regs();
+ svga_set_default_crt_regs();
+ svga_wcrt_multi(vt8623_line_compare_regs, 0xFFFFFFFF);
+ svga_wcrt_multi(vt8623_start_address_regs, 0);
+
+ svga_wcrt_multi(vt8623_offset_regs, offset_value);
+ svga_wseq_multi(vt8623_fetch_count_regs, fetch_value);
+
+ if (info->var.vmode & FB_VMODE_DOUBLE)
+ svga_wcrt_mask(0x09, 0x80, 0x80);
+ else
+ svga_wcrt_mask(0x09, 0x00, 0x80);
+
+ svga_wseq_mask(0x1E, 0xF0, 0xF0); // DI/DVP bus
+ svga_wseq_mask(0x2A, 0x0F, 0x0F); // DI/DVP bus
+ svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read treshold
+ vga_wseq(NULL, 0x17, 0x1F); // FIFO depth
+ vga_wseq(NULL, 0x18, 0x4E);
+ svga_wseq_mask(0x1A, 0x08, 0x08); // enable MMIO ?
+
+ vga_wcrt(NULL, 0x32, 0x00);
+ vga_wcrt(NULL, 0x34, 0x00);
+ vga_wcrt(NULL, 0x6A, 0x80);
+ vga_wcrt(NULL, 0x6A, 0xC0);
+
+ vga_wgfx(NULL, 0x20, 0x00);
+ vga_wgfx(NULL, 0x21, 0x00);
+ vga_wgfx(NULL, 0x22, 0x00);
+
+ /* Set SR15 according to number of bits per pixel */
+ mode = svga_match_format(vt8623fb_formats, &(info->var), &(info->fix));
+ switch (mode) {
+ case 0:
+ pr_debug("fb%d: text mode\n", info->node);
+ svga_set_textmode_vga_regs();
+ svga_wseq_mask(0x15, 0x00, 0xFE);
+ svga_wcrt_mask(0x11, 0x60, 0x70);
+ break;
+ case 1:
+ pr_debug("fb%d: 4 bit pseudocolor\n", info->node);
+ vga_wgfx(NULL, VGA_GFX_MODE, 0x40);
+ svga_wseq_mask(0x15, 0x20, 0xFE);
+ svga_wcrt_mask(0x11, 0x00, 0x70);
+ break;
+ case 2:
+ pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node);
+ svga_wseq_mask(0x15, 0x00, 0xFE);
+ svga_wcrt_mask(0x11, 0x00, 0x70);
+ break;
+ case 3:
+ pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
+ svga_wseq_mask(0x15, 0x22, 0xFE);
+ break;
+ case 4:
+ pr_debug("fb%d: 5/6/5 truecolor\n", info->node);
+ svga_wseq_mask(0x15, 0xB6, 0xFE);
+ break;
+ case 5:
+ pr_debug("fb%d: 8/8/8 truecolor\n", info->node);
+ svga_wseq_mask(0x15, 0xAE, 0xFE);
+ break;
+ default:
+ printk(KERN_ERR "vt8623fb: unsupported mode - bug\n");
+ return (-EINVAL);
+ }
+
+ vt8623_set_pixclock(info, info->var.pixclock);
+ svga_set_timings(&vt8623_timing_regs, &(info->var), 1, 1,
+ (info->var.vmode & FB_VMODE_DOUBLE) ? 2 : 1, 1,
+ 1, info->node);
+
+ memset_io(info->screen_base, 0x00, screen_size);
+
+ /* Device and screen back on */
+ svga_wcrt_mask(0x17, 0x80, 0x80);
+ svga_wcrt_mask(0x36, 0x00, 0x30);
+ svga_wseq_mask(0x01, 0x00, 0x20);
+
+ return 0;
+}
+
+
+static int vt8623fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *fb)
+{
+ switch (fb->var.bits_per_pixel) {
+ case 0:
+ case 4:
+ if (regno >= 16)
+ return -EINVAL;
+
+ outb(0x0F, VGA_PEL_MSK);
+ outb(regno, VGA_PEL_IW);
+ outb(red >> 10, VGA_PEL_D);
+ outb(green >> 10, VGA_PEL_D);
+ outb(blue >> 10, VGA_PEL_D);
+ break;
+ case 8:
+ if (regno >= 256)
+ return -EINVAL;
+
+ outb(0xFF, VGA_PEL_MSK);
+ outb(regno, VGA_PEL_IW);
+ outb(red >> 10, VGA_PEL_D);
+ outb(green >> 10, VGA_PEL_D);
+ outb(blue >> 10, VGA_PEL_D);
+ break;
+ case 16:
+ if (regno >= 16)
+ return 0;
+
+ if (fb->var.green.length == 5)
+ ((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) |
+ ((green & 0xF800) >> 6) | ((blue & 0xF800) >> 11);
+ else if (fb->var.green.length == 6)
+ ((u32*)fb->pseudo_palette)[regno] = (red & 0xF800) |
+ ((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
+ else
+ return -EINVAL;
+ break;
+ case 24:
+ case 32:
+ if (regno >= 16)
+ return 0;
+
+ /* ((transp & 0xFF00) << 16) */
+ ((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) |
+ (green & 0xFF00) | ((blue & 0xFF00) >> 8);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static int vt8623fb_blank(int blank_mode, struct fb_info *info)
+{
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ pr_debug("fb%d: unblank\n", info->node);
+ svga_wcrt_mask(0x36, 0x00, 0x30);
+ svga_wseq_mask(0x01, 0x00, 0x20);
+ break;
+ case FB_BLANK_NORMAL:
+ pr_debug("fb%d: blank\n", info->node);
+ svga_wcrt_mask(0x36, 0x00, 0x30);
+ svga_wseq_mask(0x01, 0x20, 0x20);
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ pr_debug("fb%d: DPMS standby (hsync off)\n", info->node);
+ svga_wcrt_mask(0x36, 0x10, 0x30);
+ svga_wseq_mask(0x01, 0x20, 0x20);
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ pr_debug("fb%d: DPMS suspend (vsync off)\n", info->node);
+ svga_wcrt_mask(0x36, 0x20, 0x30);
+ svga_wseq_mask(0x01, 0x20, 0x20);
+ break;
+ case FB_BLANK_POWERDOWN:
+ pr_debug("fb%d: DPMS off (no sync)\n", info->node);
+ svga_wcrt_mask(0x36, 0x30, 0x30);
+ svga_wseq_mask(0x01, 0x20, 0x20);
+ break;
+ }
+
+ return 0;
+}
+
+
+static int vt8623fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ unsigned int offset;
+
+ /* Calculate the offset */
+ if (var->bits_per_pixel == 0) {
+ offset = (var->yoffset / 16) * var->xres_virtual + var->xoffset;
+ offset = offset >> 3;
+ } else {
+ offset = (var->yoffset * info->fix.line_length) +
+ (var->xoffset * var->bits_per_pixel / 8);
+ offset = offset >> ((var->bits_per_pixel == 4) ? 2 : 1);
+ }
+
+ /* Set the offset */
+ svga_wcrt_multi(vt8623_start_address_regs, offset);
+
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/* Frame buffer operations */
+
+static struct fb_ops vt8623fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = vt8623fb_open,
+ .fb_release = vt8623fb_release,
+ .fb_check_var = vt8623fb_check_var,
+ .fb_set_par = vt8623fb_set_par,
+ .fb_setcolreg = vt8623fb_setcolreg,
+ .fb_blank = vt8623fb_blank,
+ .fb_pan_display = vt8623fb_pan_display,
+ .fb_fillrect = vt8623fb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = vt8623fb_imageblit,
+};
+
+
+/* PCI probe */
+
+static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct fb_info *info;
+ struct vt8623fb_info *par;
+ unsigned int memsize1, memsize2;
+ int rc;
+
+ /* Ignore secondary VGA device because there is no VGA arbitration */
+ if (! svga_primary_device(dev)) {
+ dev_info(&(dev->dev), "ignoring secondary device\n");
+ return -ENODEV;
+ }
+
+ /* Allocate and fill driver data structure */
+ info = framebuffer_alloc(sizeof(struct vt8623fb_info), NULL);
+ if (! info) {
+ dev_err(&(dev->dev), "cannot allocate memory\n");
+ return -ENOMEM;
+ }
+
+ par = info->par;
+ mutex_init(&par->open_lock);
+
+ info->flags = FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN;
+ info->fbops = &vt8623fb_ops;
+
+ /* Prepare PCI device */
+
+ rc = pci_enable_device(dev);
+ if (rc < 0) {
+ dev_err(&(dev->dev), "cannot enable PCI device\n");
+ goto err_enable_device;
+ }
+
+ rc = pci_request_regions(dev, "vt8623fb");
+ if (rc < 0) {
+ dev_err(&(dev->dev), "cannot reserve framebuffer region\n");
+ goto err_request_regions;
+ }
+
+ info->fix.smem_start = pci_resource_start(dev, 0);
+ info->fix.smem_len = pci_resource_len(dev, 0);
+ info->fix.mmio_start = pci_resource_start(dev, 1);
+ info->fix.mmio_len = pci_resource_len(dev, 1);
+
+ /* Map physical IO memory address into kernel space */
+ info->screen_base = pci_iomap(dev, 0, 0);
+ if (! info->screen_base) {
+ rc = -ENOMEM;
+ dev_err(&(dev->dev), "iomap for framebuffer failed\n");
+ goto err_iomap_1;
+ }
+
+ par->mmio_base = pci_iomap(dev, 1, 0);
+ if (! par->mmio_base) {
+ rc = -ENOMEM;
+ dev_err(&(dev->dev), "iomap for MMIO failed\n");
+ goto err_iomap_2;
+ }
+
+ /* Find how many physical memory there is on card */
+ memsize1 = (vga_rseq(NULL, 0x34) + 1) >> 1;
+ memsize2 = vga_rseq(NULL, 0x39) << 2;
+
+ if ((16 <= memsize1) && (memsize1 <= 64) && (memsize1 == memsize2))
+ info->screen_size = memsize1 << 20;
+ else {
+ dev_err(&(dev->dev), "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
+ info->screen_size = 16 << 20;
+ }
+
+ info->fix.smem_len = info->screen_size;
+ strcpy(info->fix.id, "VIA VT8623");
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ info->fix.ypanstep = 0;
+ info->fix.accel = FB_ACCEL_NONE;
+ info->pseudo_palette = (void*)par->pseudo_palette;
+
+ /* Prepare startup mode */
+
+ rc = fb_find_mode(&(info->var), info, mode, NULL, 0, NULL, 8);
+ if (! ((rc == 1) || (rc == 2))) {
+ rc = -EINVAL;
+ dev_err(&(dev->dev), "mode %s not found\n", mode);
+ goto err_find_mode;
+ }
+
+ rc = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (rc < 0) {
+ dev_err(&(dev->dev), "cannot allocate colormap\n");
+ goto err_alloc_cmap;
+ }
+
+ rc = register_framebuffer(info);
+ if (rc < 0) {
+ dev_err(&(dev->dev), "cannot register framebugger\n");
+ goto err_reg_fb;
+ }
+
+ printk(KERN_INFO "fb%d: %s on %s, %d MB RAM\n", info->node, info->fix.id,
+ pci_name(dev), info->fix.smem_len >> 20);
+
+ /* Record a reference to the driver data */
+ pci_set_drvdata(dev, info);
+
+#ifdef CONFIG_MTRR
+ if (mtrr) {
+ par->mtrr_reg = -1;
+ par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
+ }
+#endif
+
+ return 0;
+
+ /* Error handling */
+err_reg_fb:
+ fb_dealloc_cmap(&info->cmap);
+err_alloc_cmap:
+err_find_mode:
+ pci_iounmap(dev, par->mmio_base);
+err_iomap_2:
+ pci_iounmap(dev, info->screen_base);
+err_iomap_1:
+ pci_release_regions(dev);
+err_request_regions:
+/* pci_disable_device(dev); */
+err_enable_device:
+ framebuffer_release(info);
+ return rc;
+}
+
+/* PCI remove */
+
+static void __devexit vt8623_pci_remove(struct pci_dev *dev)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+ struct vt8623fb_info *par = info->par;
+
+ if (info) {
+#ifdef CONFIG_MTRR
+ if (par->mtrr_reg >= 0) {
+ mtrr_del(par->mtrr_reg, 0, 0);
+ par->mtrr_reg = -1;
+ }
+#endif
+
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+
+ pci_iounmap(dev, info->screen_base);
+ pci_iounmap(dev, par->mmio_base);
+ pci_release_regions(dev);
+/* pci_disable_device(dev); */
+
+ pci_set_drvdata(dev, NULL);
+ framebuffer_release(info);
+ }
+}
+
+
+#ifdef CONFIG_PM
+/* PCI suspend */
+
+static int vt8623_pci_suspend(struct pci_dev* dev, pm_message_t state)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+ struct vt8623fb_info *par = info->par;
+
+ dev_info(&(dev->dev), "suspend\n");
+
+ acquire_console_sem();
+ mutex_lock(&(par->open_lock));
+
+ if ((state.event == PM_EVENT_FREEZE) || (par->ref_count == 0)) {
+ mutex_unlock(&(par->open_lock));
+ release_console_sem();
+ return 0;
+ }
+
+ fb_set_suspend(info, 1);
+
+ pci_save_state(dev);
+ pci_disable_device(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+
+ mutex_unlock(&(par->open_lock));
+ release_console_sem();
+
+ return 0;
+}
+
+
+/* PCI resume */
+
+static int vt8623_pci_resume(struct pci_dev* dev)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+ struct vt8623fb_info *par = info->par;
+
+ dev_info(&(dev->dev), "resume\n");
+
+ acquire_console_sem();
+ mutex_lock(&(par->open_lock));
+
+ if (par->ref_count == 0) {
+ mutex_unlock(&(par->open_lock));
+ release_console_sem();
+ return 0;
+ }
+
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+
+ if (pci_enable_device(dev))
+ goto fail;
+
+ pci_set_master(dev);
+
+ vt8623fb_set_par(info);
+ fb_set_suspend(info, 0);
+
+ mutex_unlock(&(par->open_lock));
+fail:
+ release_console_sem();
+
+ return 0;
+}
+#else
+#define vt8623_pci_suspend NULL
+#define vt8623_pci_resume NULL
+#endif /* CONFIG_PM */
+
+/* List of boards that we are trying to support */
+
+static struct pci_device_id vt8623_devices[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_VIA, 0x3122)},
+ {0, 0, 0, 0, 0, 0, 0}
+};
+
+MODULE_DEVICE_TABLE(pci, vt8623_devices);
+
+static struct pci_driver vt8623fb_pci_driver = {
+ .name = "vt8623fb",
+ .id_table = vt8623_devices,
+ .probe = vt8623_pci_probe,
+ .remove = __devexit_p(vt8623_pci_remove),
+ .suspend = vt8623_pci_suspend,
+ .resume = vt8623_pci_resume,
+};
+
+/* Cleanup */
+
+static void __exit vt8623fb_cleanup(void)
+{
+ pr_debug("vt8623fb: cleaning up\n");
+ pci_unregister_driver(&vt8623fb_pci_driver);
+}
+
+/* Driver Initialisation */
+
+int __init vt8623fb_init(void)
+{
+
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("vt8623fb", &option))
+ return -ENODEV;
+
+ if (option && *option)
+ mode = option;
+#endif
+
+ pr_debug("vt8623fb: initializing\n");
+ return pci_register_driver(&vt8623fb_pci_driver);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* Modularization */
+
+module_init(vt8623fb_init);
+module_exit(vt8623fb_cleanup);