summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/arm/microchip.rst2
-rw-r--r--Documentation/devicetree/bindings/ABI.rst (renamed from Documentation/devicetree/bindings/ABI.txt)5
-rw-r--r--Documentation/devicetree/bindings/Makefile14
-rw-r--r--Documentation/devicetree/bindings/arm/altera.yaml6
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml34
-rw-r--r--Documentation/devicetree/bindings/arm/bitmain.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml49
-rw-r--r--Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt15
-rw-r--r--Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml42
-rw-r--r--Documentation/devicetree/bindings/arm/coresight-cti.yaml20
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.yaml85
-rw-r--r--Documentation/devicetree/bindings/arm/l2c2x0.yaml87
-rw-r--r--Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml9
-rw-r--r--Documentation/devicetree/bindings/arm/psci.yaml16
-rw-r--r--Documentation/devicetree/bindings/arm/renesas,prr.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml5
-rw-r--r--Documentation/devicetree/bindings/arm/socionext/uniphier.yaml28
-rw-r--r--Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml6
-rw-r--r--Documentation/devicetree/bindings/arm/syna.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml2
-rw-r--r--Documentation/devicetree/bindings/ata/faraday,ftide010.yaml4
-rw-r--r--Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml1
-rw-r--r--Documentation/devicetree/bindings/ata/sata_highbank.txt44
-rw-r--r--Documentation/devicetree/bindings/ata/sata_highbank.yaml95
-rw-r--r--Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt45
-rw-r--r--Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml96
-rw-r--r--Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml5
-rw-r--r--Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml4
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml8
-rw-r--r--Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/calxeda.txt17
-rw-r--r--Documentation/devicetree/bindings/clock/calxeda.yaml82
-rw-r--r--Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt94
-rw-r--r--Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml78
-rw-r--r--Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml5
-rw-r--r--Documentation/devicetree/bindings/clock/fsl,plldig.yaml19
-rw-r--r--Documentation/devicetree/bindings/clock/imx1-clock.txt26
-rw-r--r--Documentation/devicetree/bindings/clock/imx1-clock.yaml51
-rw-r--r--Documentation/devicetree/bindings/clock/imx21-clock.txt27
-rw-r--r--Documentation/devicetree/bindings/clock/imx21-clock.yaml51
-rw-r--r--Documentation/devicetree/bindings/clock/imx23-clock.txt70
-rw-r--r--Documentation/devicetree/bindings/clock/imx23-clock.yaml92
-rw-r--r--Documentation/devicetree/bindings/clock/imx25-clock.txt160
-rw-r--r--Documentation/devicetree/bindings/clock/imx25-clock.yaml186
-rw-r--r--Documentation/devicetree/bindings/clock/imx27-clock.txt27
-rw-r--r--Documentation/devicetree/bindings/clock/imx27-clock.yaml55
-rw-r--r--Documentation/devicetree/bindings/clock/imx28-clock.txt93
-rw-r--r--Documentation/devicetree/bindings/clock/imx28-clock.yaml115
-rw-r--r--Documentation/devicetree/bindings/clock/imx31-clock.txt90
-rw-r--r--Documentation/devicetree/bindings/clock/imx31-clock.yaml120
-rw-r--r--Documentation/devicetree/bindings/clock/imx35-clock.txt114
-rw-r--r--Documentation/devicetree/bindings/clock/imx35-clock.yaml139
-rw-r--r--Documentation/devicetree/bindings/clock/imx5-clock.txt28
-rw-r--r--Documentation/devicetree/bindings/clock/imx5-clock.yaml65
-rw-r--r--Documentation/devicetree/bindings/clock/imx6q-clock.txt41
-rw-r--r--Documentation/devicetree/bindings/clock/imx6q-clock.yaml72
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sl-clock.txt10
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sl-clock.yaml48
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sll-clock.txt36
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sll-clock.yaml66
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sx-clock.txt13
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sx-clock.yaml70
-rw-r--r--Documentation/devicetree/bindings/clock/imx6ul-clock.txt13
-rw-r--r--Documentation/devicetree/bindings/clock/imx6ul-clock.yaml66
-rw-r--r--Documentation/devicetree/bindings/clock/imx7d-clock.txt13
-rw-r--r--Documentation/devicetree/bindings/clock/imx7d-clock.yaml65
-rw-r--r--Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt51
-rw-r--r--Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml73
-rw-r--r--Documentation/devicetree/bindings/clock/ingenic,cgu.txt57
-rw-r--r--Documentation/devicetree/bindings/clock/ingenic,cgu.yaml124
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,mmcc.yaml16
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml29
-rw-r--r--Documentation/devicetree/bindings/connector/usb-connector.yaml73
-rw-r--r--Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml14
-rw-r--r--Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml16
-rw-r--r--Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml4
-rw-r--r--Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml9
-rw-r--r--Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml7
-rw-r--r--Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml40
-rw-r--r--Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml63
-rw-r--r--Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml28
-rw-r--r--Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml10
-rw-r--r--Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml119
-rw-r--r--Documentation/devicetree/bindings/display/bridge/anx7814.txt42
-rw-r--r--Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml18
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel-common.yaml11
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel-timing.yaml120
-rw-r--r--Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml4
-rw-r--r--Documentation/devicetree/bindings/display/renesas,cmm.yaml18
-rw-r--r--Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml19
-rw-r--r--Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml34
-rw-r--r--Documentation/devicetree/bindings/dma/dma-common.yaml3
-rw-r--r--Documentation/devicetree/bindings/dma/ingenic,dma.yaml80
-rw-r--r--Documentation/devicetree/bindings/dma/jz4780-dma.txt64
-rw-r--r--Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt3
-rw-r--r--Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml2
-rw-r--r--Documentation/devicetree/bindings/dma/ti/k3-udma.yaml29
-rw-r--r--Documentation/devicetree/bindings/eeprom/at24.yaml13
-rw-r--r--Documentation/devicetree/bindings/example-schema.yaml17
-rw-r--r--Documentation/devicetree/bindings/extcon/extcon-arizona.txt76
-rw-r--r--Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml3
-rw-r--r--Documentation/devicetree/bindings/extcon/wlf,arizona.yaml125
-rw-r--r--Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt35
-rw-r--r--Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml68
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-mxs.txt88
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-mxs.yaml136
-rw-r--r--Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt94
-rw-r--r--Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml144
-rw-r--r--Documentation/devicetree/bindings/gpio/sifive,gpio.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml6
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml20
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml4
-rw-r--r--Documentation/devicetree/bindings/gpu/vivante,gc.yaml2
-rw-r--r--Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml3
-rw-r--r--Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml32
-rw-r--r--Documentation/devicetree/bindings/hwmon/adt7475.yaml18
-rw-r--r--Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt26
-rw-r--r--Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml35
-rw-r--r--Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml21
-rw-r--r--Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml58
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-cadence.txt28
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-jz4780.txt33
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml10
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-xiic.txt25
-rw-r--r--Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml88
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,i2c.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,iic.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml15
-rw-r--r--Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml49
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml35
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml27
-rw-r--r--Documentation/devicetree/bindings/iio/imu/bmi160.txt37
-rw-r--r--Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml75
-rw-r--r--Documentation/devicetree/bindings/iio/light/tsl2772.yaml13
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml60
-rw-r--r--Documentation/devicetree/bindings/index.rst12
-rw-r--r--Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml9
-rw-r--r--Documentation/devicetree/bindings/input/gpio-keys-polled.txt45
-rw-r--r--Documentation/devicetree/bindings/input/gpio-keys.txt58
-rw-r--r--Documentation/devicetree/bindings/input/gpio-keys.yaml149
-rw-r--r--Documentation/devicetree/bindings/input/input.yaml9
-rw-r--r--Documentation/devicetree/bindings/input/iqs62x-keys.yaml7
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml30
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/goodix.yaml2
-rw-r--r--Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml4
-rw-r--r--Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml4
-rw-r--r--Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml4
-rw-r--r--Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml6
-rw-r--r--Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml4
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml12
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml39
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml9
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt35
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml89
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt28
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml63
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml8
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml8
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt62
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml107
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml3
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml12
-rw-r--r--Documentation/devicetree/bindings/iommu/arm,smmu.yaml3
-rw-r--r--Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt73
-rw-r--r--Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml98
-rw-r--r--Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml10
-rw-r--r--Documentation/devicetree/bindings/ipmi/ipmi-smic.txt25
-rw-r--r--Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml63
-rw-r--r--Documentation/devicetree/bindings/leds/common.yaml13
-rw-r--r--Documentation/devicetree/bindings/leds/leds-gpio.yaml3
-rw-r--r--Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml9
-rw-r--r--Documentation/devicetree/bindings/mailbox/fsl,mu.txt58
-rw-r--r--Documentation/devicetree/bindings/mailbox/fsl,mu.yaml91
-rw-r--r--Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml7
-rw-r--r--Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml28
-rw-r--r--Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml20
-rw-r--r--Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml5
-rw-r--r--Documentation/devicetree/bindings/media/i2c/imx219.yaml3
-rw-r--r--Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt50
-rw-r--r--Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml99
-rw-r--r--Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml2
-rw-r--r--Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml2
-rw-r--r--Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml2
-rw-r--r--Documentation/devicetree/bindings/media/rc.yaml265
-rw-r--r--Documentation/devicetree/bindings/media/renesas,ceu.yaml39
-rw-r--r--Documentation/devicetree/bindings/media/renesas,csi2.yaml2
-rw-r--r--Documentation/devicetree/bindings/media/renesas,vin.yaml21
-rw-r--r--Documentation/devicetree/bindings/media/ti,vpe.yaml2
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt16
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml42
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml13
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml6
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt76
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml126
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml13
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml5
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml9
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml3
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt44
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml56
-rw-r--r--Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml20
-rw-r--r--Documentation/devicetree/bindings/mfd/arizona.txt101
-rw-r--r--Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt85
-rw-r--r--Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml352
-rw-r--r--Documentation/devicetree/bindings/mfd/cirrus,madera.yaml299
-rw-r--r--Documentation/devicetree/bindings/mfd/madera.txt114
-rw-r--r--Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml37
-rw-r--r--Documentation/devicetree/bindings/mfd/st,stpmic1.yaml9
-rw-r--r--Documentation/devicetree/bindings/mfd/syscon.yaml17
-rw-r--r--Documentation/devicetree/bindings/mfd/wlf,arizona.yaml280
-rw-r--r--Documentation/devicetree/bindings/mips/ingenic/devices.yaml4
-rw-r--r--Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml4
-rw-r--r--Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml79
-rw-r--r--Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml79
-rw-r--r--Documentation/devicetree/bindings/mmc/jz4740.txt41
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-controller.yaml37
-rw-r--r--Documentation/devicetree/bindings/mmc/owl-mmc.yaml2
-rw-r--r--Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml24
-rw-r--r--Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml14
-rw-r--r--Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml14
-rw-r--r--Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml13
-rw-r--r--Documentation/devicetree/bindings/mtd/denali,nand.yaml4
-rw-r--r--Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt92
-rw-r--r--Documentation/devicetree/bindings/mtd/ingenic,nand.yaml132
-rw-r--r--Documentation/devicetree/bindings/mtd/nand-controller.yaml27
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml4
-rw-r--r--Documentation/devicetree/bindings/net/calxeda-xgmac.txt18
-rw-r--r--Documentation/devicetree/bindings/net/calxeda-xgmac.yaml49
-rw-r--r--Documentation/devicetree/bindings/net/can/bosch,m_can.yaml111
-rw-r--r--Documentation/devicetree/bindings/net/ethernet-controller.yaml34
-rw-r--r--Documentation/devicetree/bindings/net/qca,ar803x.yaml17
-rw-r--r--Documentation/devicetree/bindings/net/qcom,ipa.yaml12
-rw-r--r--Documentation/devicetree/bindings/net/renesas,ether.yaml9
-rw-r--r--Documentation/devicetree/bindings/net/renesas,ravb.txt1
-rw-r--r--Documentation/devicetree/bindings/net/snps,dwmac.yaml30
-rw-r--r--Documentation/devicetree/bindings/net/stm32-dwmac.txt44
-rw-r--r--Documentation/devicetree/bindings/net/stm32-dwmac.yaml148
-rw-r--r--Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml18
-rw-r--r--Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml34
-rw-r--r--Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml98
-rw-r--r--Documentation/devicetree/bindings/nvmem/imx-iim.txt22
-rw-r--r--Documentation/devicetree/bindings/nvmem/imx-iim.yaml57
-rw-r--r--Documentation/devicetree/bindings/nvmem/imx-ocotp.txt50
-rw-r--r--Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml95
-rw-r--r--Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt24
-rw-r--r--Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml50
-rw-r--r--Documentation/devicetree/bindings/nvmem/nvmem.yaml2
-rw-r--r--Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt54
-rw-r--r--Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml70
-rw-r--r--Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml17
-rw-r--r--Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml3
-rw-r--r--Documentation/devicetree/bindings/pci/cdns-pcie.yaml3
-rw-r--r--Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml7
-rw-r--r--Documentation/devicetree/bindings/pci/pci-ep.yaml9
-rw-r--r--Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt3
-rw-r--r--Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml2
-rw-r--r--Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml2
-rw-r--r--Documentation/devicetree/bindings/phy/calxeda-combophy.txt17
-rw-r--r--Documentation/devicetree/bindings/phy/calxeda-combophy.yaml51
-rw-r--r--Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml2
-rw-r--r--Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml59
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml65
-rw-r--r--Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt3
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml2
-rw-r--r--Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml77
-rw-r--r--Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml85
-rw-r--r--Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml103
-rw-r--r--Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml96
-rw-r--r--Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt36
-rw-r--r--Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt45
-rw-r--r--Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt69
-rw-r--r--Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt58
-rw-r--r--Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml12
-rw-r--r--Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml37
-rw-r--r--Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml46
-rw-r--r--Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml108
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt141
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml190
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt99
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml122
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml31
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml31
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml31
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml31
-rw-r--r--Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml3
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml3
-rw-r--r--Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml54
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml3
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpc.txt91
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml124
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt77
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml108
-rw-r--r--Documentation/devicetree/bindings/power/renesas,apmu.yaml1
-rw-r--r--Documentation/devicetree/bindings/pwm/imx-pwm.txt27
-rw-r--r--Documentation/devicetree/bindings/pwm/imx-pwm.yaml66
-rw-r--r--Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt22
-rw-r--r--Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml55
-rw-r--r--Documentation/devicetree/bindings/pwm/mxs-pwm.txt17
-rw-r--r--Documentation/devicetree/bindings/pwm/mxs-pwm.yaml43
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-samsung.yaml27
-rw-r--r--Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml2
-rw-r--r--Documentation/devicetree/bindings/regulator/arizona-regulator.txt18
-rw-r--r--Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt82
-rw-r--r--Documentation/devicetree/bindings/regulator/gpio-regulator.yaml35
-rw-r--r--Documentation/devicetree/bindings/regulator/mps,mp5416.yaml6
-rw-r--r--Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml28
-rw-r--r--Documentation/devicetree/bindings/regulator/regulator.yaml5
-rw-r--r--Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml34
-rw-r--r--Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml27
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml3
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml3
-rw-r--r--Documentation/devicetree/bindings/regulator/wlf,arizona.yaml37
-rw-r--r--Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml11
-rw-r--r--Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt2
-rw-r--r--Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml4
-rw-r--r--Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml3
-rw-r--r--Documentation/devicetree/bindings/riscv/cpus.yaml20
-rw-r--r--Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml5
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-mxc.txt26
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-mxc.yaml57
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt17
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml46
-rw-r--r--Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml47
-rw-r--r--Documentation/devicetree/bindings/serial/8250.txt100
-rw-r--r--Documentation/devicetree/bindings/serial/8250.yaml233
-rw-r--r--Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml16
-rw-r--r--Documentation/devicetree/bindings/serial/ingenic,uart.txt28
-rw-r--r--Documentation/devicetree/bindings/serial/ingenic,uart.yaml94
-rw-r--r--Documentation/devicetree/bindings/serial/mrvl-serial.txt4
-rw-r--r--Documentation/devicetree/bindings/serial/pl011.yaml10
-rw-r--r--Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt31
-rw-r--r--Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml50
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,em-uart.yaml49
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,hscif.yaml1
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,scif.yaml1
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,scifa.yaml15
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,scifb.yaml1
-rw-r--r--Documentation/devicetree/bindings/serial/rs485.yaml43
-rw-r--r--Documentation/devicetree/bindings/serial/samsung_uart.yaml5
-rw-r--r--Documentation/devicetree/bindings/serial/serial.yaml8
-rw-r--r--Documentation/devicetree/bindings/serial/sifive-serial.yaml2
-rw-r--r--Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml10
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt94
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml225
-rw-r--r--Documentation/devicetree/bindings/sound/adi,adau7118.yaml20
-rw-r--r--Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml51
-rw-r--r--Documentation/devicetree/bindings/sound/amlogic,aiu.yaml3
-rw-r--r--Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml2
-rw-r--r--Documentation/devicetree/bindings/sound/amlogic,t9015.yaml3
-rw-r--r--Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt39
-rw-r--r--Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml52
-rw-r--r--Documentation/devicetree/bindings/sound/cirrus,madera.yaml113
-rw-r--r--Documentation/devicetree/bindings/sound/madera.txt67
-rw-r--r--Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml3
-rw-r--r--Documentation/devicetree/bindings/sound/renesas,fsi.yaml41
-rw-r--r--Documentation/devicetree/bindings/sound/rockchip-i2s.yaml6
-rw-r--r--Documentation/devicetree/bindings/sound/tlv320adcx140.yaml10
-rw-r--r--Documentation/devicetree/bindings/sound/wlf,arizona.txt53
-rw-r--r--Documentation/devicetree/bindings/sound/wlf,arizona.yaml114
-rw-r--r--Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml58
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml10
-rw-r--r--Documentation/devicetree/bindings/spi/renesas,hspi.yaml4
-rw-r--r--Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml44
-rw-r--r--Documentation/devicetree/bindings/spi/spi-controller.yaml14
-rw-r--r--Documentation/devicetree/bindings/spi/spi-pl022.yaml57
-rw-r--r--Documentation/devicetree/bindings/spi/spi-pxa2xx.txt27
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sifive.yaml25
-rw-r--r--Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml4
-rw-r--r--Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml64
-rw-r--r--Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt16
-rw-r--r--Documentation/devicetree/bindings/sram/sram.yaml28
-rw-r--r--Documentation/devicetree/bindings/submitting-patches.rst (renamed from Documentation/devicetree/bindings/submitting-patches.txt)12
-rw-r--r--Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml10
-rw-r--r--Documentation/devicetree/bindings/thermal/imx-thermal.txt61
-rw-r--r--Documentation/devicetree/bindings/thermal/imx-thermal.yaml102
-rw-r--r--Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt15
-rw-r--r--Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml58
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-tsens.yaml7
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt60
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml99
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-thermal.yaml7
-rw-r--r--Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml59
-rw-r--r--Documentation/devicetree/bindings/thermal/sprd-thermal.yaml2
-rw-r--r--Documentation/devicetree/bindings/thermal/uniphier-thermal.txt65
-rw-r--r--Documentation/devicetree/bindings/timer/arm,arch_timer.yaml10
-rw-r--r--Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml11
-rw-r--r--Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt21
-rw-r--r--Documentation/devicetree/bindings/timer/cdns,ttc.yaml48
-rw-r--r--Documentation/devicetree/bindings/timer/fsl,imxgpt.txt45
-rw-r--r--Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml72
-rw-r--r--Documentation/devicetree/bindings/timer/ingenic,tcu.txt138
-rw-r--r--Documentation/devicetree/bindings/timer/ingenic,tcu.yaml280
-rw-r--r--Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt25
-rw-r--r--Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml54
-rw-r--r--Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt28
-rw-r--r--Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml61
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,cmt.txt110
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,cmt.yaml182
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,mtu2.txt42
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,mtu2.yaml76
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,ostm.txt31
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,ostm.yaml59
-rw-r--r--Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml65
-rw-r--r--Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml3
-rw-r--r--Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml18
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.yaml11
-rw-r--r--Documentation/devicetree/bindings/usb/ehci-mv.txt23
-rw-r--r--Documentation/devicetree/bindings/usb/generic-ehci.yaml27
-rw-r--r--Documentation/devicetree/bindings/usb/generic-ohci.yaml6
-rw-r--r--Documentation/devicetree/bindings/usb/ingenic,musb.yaml3
-rw-r--r--Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml62
-rw-r--r--Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml6
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,dwc3.txt104
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,dwc3.yaml174
-rw-r--r--Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/renesas,usbhs.yaml3
-rw-r--r--Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml54
-rw-r--r--Documentation/devicetree/bindings/usb/usb-conn-gpio.txt30
-rw-r--r--Documentation/devicetree/bindings/usb/usb-xhci.txt1
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml20
-rw-r--r--Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt24
-rw-r--r--Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml54
-rw-r--r--Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt22
-rw-r--r--Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml60
-rw-r--r--Documentation/devicetree/bindings/watchdog/renesas,wdt.txt51
-rw-r--r--Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml101
-rw-r--r--Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml36
-rw-r--r--Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml2
-rw-r--r--Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt20
-rw-r--r--Documentation/devicetree/bindings/writing-bindings.rst (renamed from Documentation/devicetree/bindings/writing-bindings.txt)9
-rw-r--r--Documentation/devicetree/changesets.rst (renamed from Documentation/devicetree/changesets.txt)24
-rw-r--r--Documentation/devicetree/dynamic-resolution-notes.rst (renamed from Documentation/devicetree/dynamic-resolution-notes.txt)5
-rw-r--r--Documentation/devicetree/index.rst17
-rw-r--r--Documentation/devicetree/of_unittest.rst (renamed from Documentation/devicetree/of_unittest.txt)192
-rw-r--r--Documentation/devicetree/overlay-notes.rst (renamed from Documentation/devicetree/overlay-notes.txt)119
-rw-r--r--Documentation/devicetree/usage-model.rst (renamed from Documentation/devicetree/usage-model.txt)35
-rw-r--r--Documentation/index.rst3
-rw-r--r--Documentation/process/submitting-patches.rst2
-rw-r--r--Documentation/translations/it_IT/process/submitting-patches.rst2
-rw-r--r--MAINTAINERS33
-rw-r--r--drivers/of/dynamic.c3
-rw-r--r--drivers/of/fdt.c8
-rw-r--r--drivers/of/kobj.c3
-rw-r--r--drivers/of/of_reserved_mem.c10
-rw-r--r--drivers/of/platform.c2
-rw-r--r--drivers/of/property.c20
-rw-r--r--include/linux/mfd/core.h2
-rwxr-xr-xscripts/checkpatch.pl2
469 files changed, 11739 insertions, 7435 deletions
diff --git a/Documentation/arm/microchip.rst b/Documentation/arm/microchip.rst
index 05e5f2dfb814..9c013299fd3b 100644
--- a/Documentation/arm/microchip.rst
+++ b/Documentation/arm/microchip.rst
@@ -192,7 +192,7 @@ Device Tree files and Device Tree bindings that apply to AT91 SoCs and boards ar
considered as "Unstable". To be completely clear, any at91 binding can change at
any time. So, be sure to use a Device Tree Binary and a Kernel Image generated from
the same source tree.
-Please refer to the Documentation/devicetree/bindings/ABI.txt file for a
+Please refer to the Documentation/devicetree/bindings/ABI.rst file for a
definition of a "Stable" binding/ABI.
This statement will be removed by AT91 MAINTAINERS when appropriate.
diff --git a/Documentation/devicetree/bindings/ABI.txt b/Documentation/devicetree/bindings/ABI.rst
index d25f8d379680..a885713cf184 100644
--- a/Documentation/devicetree/bindings/ABI.txt
+++ b/Documentation/devicetree/bindings/ABI.rst
@@ -1,5 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
- Devicetree (DT) ABI
+===================
+Devicetree (DT) ABI
+===================
I. Regarding stable bindings/ABI, we quote from the 2013 ARM mini-summit
summary document:
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 7782d9985082..a63898954068 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -4,11 +4,19 @@ DT_EXTRACT_EX ?= dt-extract-example
DT_MK_SCHEMA ?= dt-mk-schema
DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
+DT_SCHEMA_MIN_VERSION = 2020.5
+
+PHONY += check_dtschema_version
+check_dtschema_version:
+ @{ echo $(DT_SCHEMA_MIN_VERSION); \
+ $(DT_DOC_CHECKER) --version 2>/dev/null || echo 0; } | sort -VC || \
+ { echo "ERROR: dtschema minimum version is v$(DT_SCHEMA_MIN_VERSION)" >&2; false; }
+
quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<)
cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
$(DT_EXTRACT_EX) $< > $@
-$(obj)/%.example.dts: $(src)/%.yaml FORCE
+$(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
$(call if_changed,chk_binding)
# Use full schemas when checking %.example.dts
@@ -37,11 +45,11 @@ override DTC_FLAGS := \
-Wno-avoid_unnecessary_addr_size \
-Wno-graph_child_address
-$(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE
+$(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE
$(call if_changed,mk_schema)
$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
-$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE
+$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
$(call if_changed,mk_schema)
extra-y += processed-schema.yaml
diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
index 49e0362ddc11..b388c5aa7984 100644
--- a/Documentation/devicetree/bindings/arm/altera.yaml
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -13,8 +13,8 @@ properties:
compatible:
items:
- enum:
- - altr,socfpga-cyclone5
- - altr,socfpga-arria5
- - altr,socfpga-arria10
+ - altr,socfpga-cyclone5
+ - altr,socfpga-arria5
+ - altr,socfpga-arria10
- const: altr,socfpga
...
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index db35e0d0134c..378229fa8310 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -17,7 +17,7 @@ description: |+
any time. Be sure to use a device tree binary and a kernel image
generated from the same source tree.
- Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+ Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
stable binding/ABI.
properties:
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
index 66213bd95e6e..6cc74523ebfd 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -25,7 +25,7 @@ select:
properties:
compatible:
- items:
+ items:
- const: amlogic,meson-gx-ao-secure
- const: syscon
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index 8c06a73f716c..a3420c81cf35 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -131,26 +131,23 @@ properties:
property, describing the physical location of the children nodes.
0 means motherboard site, while 1 and 2 are daughterboard sites, and
0xf means "sisterboard" which is the site containing the main CPU tile.
- allOf:
- - $ref: '/schemas/types.yaml#/definitions/uint32'
- - minimum: 0
- maximum: 15
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ minimum: 0
+ maximum: 15
arm,vexpress,position:
description: When daughterboards are stacked on one site, their position
in the stack be be described this attribute.
- allOf:
- - $ref: '/schemas/types.yaml#/definitions/uint32'
- - minimum: 0
- maximum: 3
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ minimum: 0
+ maximum: 3
arm,vexpress,dcc:
description: When describing tiles consisting of more than one DCC, its
number can be specified with this attribute.
- allOf:
- - $ref: '/schemas/types.yaml#/definitions/uint32'
- - minimum: 0
- maximum: 3
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ minimum: 0
+ maximum: 3
patternProperties:
"^bus@[0-9a-f]+$":
@@ -162,8 +159,7 @@ patternProperties:
"simple-bus". If the compatible is placed in the "motherboard" node,
it is stricter and always has two compatibles.
type: object
- allOf:
- - $ref: '/schemas/simple-bus.yaml'
+ $ref: '/schemas/simple-bus.yaml'
properties:
compatible:
@@ -195,11 +191,11 @@ patternProperties:
- const: simple-bus
arm,v2m-memory-map:
description: This describes the memory map type.
- allOf:
- - $ref: '/schemas/types.yaml#/definitions/string'
- - enum:
- - rs1
- - rs2
+ $ref: '/schemas/types.yaml#/definitions/string'
+ enum:
+ - rs1
+ - rs2
+
required:
- compatible
required:
diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml
index 0efdb4ac028e..5cd5b36cff2d 100644
--- a/Documentation/devicetree/bindings/arm/bitmain.yaml
+++ b/Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -13,6 +13,6 @@ properties:
compatible:
items:
- enum:
- - bitmain,sophon-edge
+ - bitmain,sophon-edge
- const: bitmain,bm1880
...
diff --git a/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml b/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml
new file mode 100644
index 000000000000..dfdc97083efb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda/hb-sregs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank system registers
+
+description: |
+ The Calxeda Highbank system has a block of MMIO registers controlling
+ several generic system aspects. Those can be used to control some power
+ management, they also contain some gate and PLL clocks.
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+ compatible:
+ const: calxeda,hb-sregs
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ type: object
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ sregs@fff3c000 {
+ compatible = "calxeda,hb-sregs";
+ reg = <0xfff3c000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
deleted file mode 100644
index 94e642a33db0..000000000000
--- a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Calxeda Highbank L2 cache ECC
-
-Properties:
-- compatible : Should be "calxeda,hb-sregs-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
- interrupt.
-
-Example:
-
- sregs@fff3c200 {
- compatible = "calxeda,hb-sregs-l2-ecc";
- reg = <0xfff3c200 0x100>;
- interrupts = <0 71 4 0 72 4>;
- };
diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
new file mode 100644
index 000000000000..a9fe01238a88
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda/l2ecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank L2 cache ECC
+
+description: |
+ Binding for the Calxeda Highbank L2 cache controller ECC device.
+ This does not cover the actual L2 cache controller control registers,
+ but just the error reporting functionality.
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+ compatible:
+ const: "calxeda,hb-sregs-l2-ecc"
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: single bit error interrupt
+ - description: double bit error interrupt
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ sregs@fff3c200 {
+ compatible = "calxeda,hb-sregs-l2-ecc";
+ reg = <0xfff3c200 0x100>;
+ interrupts = <0 71 4>, <0 72 4>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
index 3db3642bd532..17df5cd12d8d 100644
--- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml
+++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
@@ -140,16 +140,14 @@ patternProperties:
maxItems: 1
arm,trig-in-sigs:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 32
description:
List of CTI trigger in signal numbers in use by a trig-conns node.
arm,trig-in-types:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 32
description:
@@ -159,16 +157,14 @@ patternProperties:
completely, then the types will default to GEN_IO.
arm,trig-out-sigs:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 32
description:
List of CTI trigger out signal numbers in use by a trig-conns node.
arm,trig-out-types:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 32
description:
@@ -178,8 +174,7 @@ patternProperties:
or omitted completely, then the types will default to GEN_IO.
arm,trig-filters:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 32
description:
@@ -187,8 +182,7 @@ patternProperties:
active, unless filtering is disabled on the driver.
arm,trig-conn-name:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
description:
Defines a connection name that will be displayed, if the cpu or
arm,cs-dev-assoc properties are not being used in this connection.
@@ -301,7 +295,7 @@ examples:
- |
cti@20110000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0 0x20110000 0 0x1000>;
+ reg = <0x20110000 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 44791d2b41c1..40f692c846f0 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -172,49 +172,48 @@ properties:
- qcom,scorpion
enable-method:
- allOf:
- - $ref: '/schemas/types.yaml#/definitions/string'
- - oneOf:
- # On ARM v8 64-bit this property is required
- - enum:
- - psci
- - spin-table
- # On ARM 32-bit systems this property is optional
- - enum:
- - actions,s500-smp
- - allwinner,sun6i-a31
- - allwinner,sun8i-a23
- - allwinner,sun9i-a80-smp
- - allwinner,sun8i-a83t-smp
- - amlogic,meson8-smp
- - amlogic,meson8b-smp
- - arm,realview-smp
- - aspeed,ast2600-smp
- - brcm,bcm11351-cpu-method
- - brcm,bcm23550
- - brcm,bcm2836-smp
- - brcm,bcm63138
- - brcm,bcm-nsp-smp
- - brcm,brahma-b15
- - marvell,armada-375-smp
- - marvell,armada-380-smp
- - marvell,armada-390-smp
- - marvell,armada-xp-smp
- - marvell,98dx3236-smp
- - marvell,mmp3-smp
- - mediatek,mt6589-smp
- - mediatek,mt81xx-tz-smp
- - qcom,gcc-msm8660
- - qcom,kpss-acc-v1
- - qcom,kpss-acc-v2
- - renesas,apmu
- - renesas,r9a06g032-smp
- - rockchip,rk3036-smp
- - rockchip,rk3066-smp
- - socionext,milbeaut-m10v-smp
- - ste,dbx500-smp
- - ti,am3352
- - ti,am4372
+ $ref: '/schemas/types.yaml#/definitions/string'
+ oneOf:
+ # On ARM v8 64-bit this property is required
+ - enum:
+ - psci
+ - spin-table
+ # On ARM 32-bit systems this property is optional
+ - enum:
+ - actions,s500-smp
+ - allwinner,sun6i-a31
+ - allwinner,sun8i-a23
+ - allwinner,sun9i-a80-smp
+ - allwinner,sun8i-a83t-smp
+ - amlogic,meson8-smp
+ - amlogic,meson8b-smp
+ - arm,realview-smp
+ - aspeed,ast2600-smp
+ - brcm,bcm11351-cpu-method
+ - brcm,bcm23550
+ - brcm,bcm2836-smp
+ - brcm,bcm63138
+ - brcm,bcm-nsp-smp
+ - brcm,brahma-b15
+ - marvell,armada-375-smp
+ - marvell,armada-380-smp
+ - marvell,armada-390-smp
+ - marvell,armada-xp-smp
+ - marvell,98dx3236-smp
+ - marvell,mmp3-smp
+ - mediatek,mt6589-smp
+ - mediatek,mt81xx-tz-smp
+ - qcom,gcc-msm8660
+ - qcom,kpss-acc-v1
+ - qcom,kpss-acc-v2
+ - renesas,apmu
+ - renesas,r9a06g032-smp
+ - rockchip,rk3036-smp
+ - rockchip,rk3066-smp
+ - socionext,milbeaut-m10v-smp
+ - ste,dbx500-smp
+ - ti,am3352
+ - ti,am4372
cpu-release-addr:
$ref: '/schemas/types.yaml#/definitions/uint64'
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
index 5d1d50eea26e..6b8f4d4fa580 100644
--- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
@@ -70,43 +70,39 @@ properties:
description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
read, write and setup latencies. Minimum valid values are 1. Controllers
without setup latency control should use a value of 0.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 2
- maxItems: 3
- items:
- minimum: 0
- maximum: 8
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 8
arm,tag-latency:
description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
read, write and setup latencies. Controllers without setup latency control
should use 0. Controllers without separate read and write Tag RAM latency
values should only use the first cell.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 3
- items:
- minimum: 0
- maximum: 8
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 8
arm,dirty-latency:
description: Cycles of latency for Dirty RAMs. This is a single cell.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 1
- maximum: 8
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 8
arm,filter-ranges:
description: <start length> Starting address and length of window to
filter. Addresses in the filter window are directed to the M1 port. Other
addresses will go to the M0 port.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- minItems: 2
- maxItems: 2
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minItems: 2
+ maxItems: 2
arm,io-coherent:
description: indicates that the system is operating in an hardware
@@ -131,36 +127,31 @@ properties:
arm,double-linefill:
description: Override double linefill enable setting. Enable if
non-zero, disable if zero.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
arm,double-linefill-incr:
description: Override double linefill on INCR read. Enable
if non-zero, disable if zero.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
arm,double-linefill-wrap:
description: Override double linefill on WRAP read. Enable
if non-zero, disable if zero.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
arm,prefetch-drop:
description: Override prefetch drop enable setting. Enable if non-zero,
disable if zero.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
arm,prefetch-offset:
description: Override prefetch offset value.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
arm,shared-override:
description: The default behavior of the L220 or PL310 cache
@@ -193,35 +184,31 @@ properties:
description: |
Data prefetch. Value: <0> (forcibly disable), <1>
(forcibly enable), property absent (retain settings set by firmware)
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
prefetch-instr:
description: |
Instruction prefetch. Value: <0> (forcibly disable),
<1> (forcibly enable), property absent (retain settings set by
firmware)
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
arm,dynamic-clock-gating:
description: |
L2 dynamic clock gating. Value: <0> (forcibly
disable), <1> (forcibly enable), property absent (OS specific behavior,
preferably retain firmware settings)
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
arm,standby-mode:
description: L2 standby mode enable. Value <0> (forcibly disable),
<1> (forcibly enable), property absent (OS specific behavior,
preferably retain firmware settings)
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
arm,early-bresp-disable:
description: Disable the CA9 optimization Early BRESP (PL310)
diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
index 07f39d3eee7e..f7f024910e71 100644
--- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
+++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
@@ -17,9 +17,8 @@ properties:
- nxp,lpc3230
- nxp,lpc3240
- items:
- - enum:
- - ea,ea3250
- - phytec,phy3250
- - const: nxp,lpc3250
-
+ - enum:
+ - ea,ea3250
+ - phytec,phy3250
+ - const: nxp,lpc3250
...
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 9247b58c26fc..8b77cf83a095 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -69,13 +69,11 @@ properties:
method:
description: The method of calling the PSCI firmware.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string-array
- - enum:
- # SMC #0, with the register assignments specified in this binding.
- - smc
- # HVC #0, with the register assignments specified in this binding.
- - hvc
+ $ref: /schemas/types.yaml#/definitions/string-array
+ enum:
+ - smc
+ # HVC #0, with the register assignments specified in this binding.
+ - hvc
cpu_suspend:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -107,8 +105,8 @@ properties:
patternProperties:
"^power-domain-":
- allOf:
- - $ref: "../power/power-domain.yaml#"
+ $ref: "../power/power-domain.yaml#"
+
type: object
description: |
ARM systems can have multiple cores, sometimes in an hierarchical
diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
index dd087643a9f8..1f80767da38b 100644
--- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
@@ -33,5 +33,5 @@ examples:
- |
prr: chipid@ff000044 {
compatible = "renesas,prr";
- reg = <0 0xff000044 0 4>;
+ reg = <0xff000044 4>;
};
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
index 0425d333b50d..f99c0c6df21b 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
@@ -22,9 +22,8 @@ properties:
Adaptive Supply Voltage bin selection. This can be used
to determine the ASV bin of an SoC if respective information
is missing in the CHIPID registers or in the OTP memory.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1, 2, 3 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
index 10a7f0752281..6caf1f9be390 100644
--- a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
+++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
@@ -17,46 +17,46 @@ properties:
- description: LD4 SoC boards
items:
- enum:
- - socionext,uniphier-ld4-ref
+ - socionext,uniphier-ld4-ref
- const: socionext,uniphier-ld4
- description: Pro4 SoC boards
items:
- enum:
- - socionext,uniphier-pro4-ace
- - socionext,uniphier-pro4-ref
- - socionext,uniphier-pro4-sanji
+ - socionext,uniphier-pro4-ace
+ - socionext,uniphier-pro4-ref
+ - socionext,uniphier-pro4-sanji
- const: socionext,uniphier-pro4
- description: sLD8 SoC boards
items:
- enum:
- - socionext,uniphier-sld8-ref
+ - socionext,uniphier-sld8-ref
- const: socionext,uniphier-sld8
- description: PXs2 SoC boards
items:
- enum:
- - socionext,uniphier-pxs2-gentil
- - socionext,uniphier-pxs2-vodka
+ - socionext,uniphier-pxs2-gentil
+ - socionext,uniphier-pxs2-vodka
- const: socionext,uniphier-pxs2
- description: LD6b SoC boards
items:
- enum:
- - socionext,uniphier-ld6b-ref
+ - socionext,uniphier-ld6b-ref
- const: socionext,uniphier-ld6b
- description: LD11 SoC boards
items:
- enum:
- - socionext,uniphier-ld11-global
- - socionext,uniphier-ld11-ref
+ - socionext,uniphier-ld11-global
+ - socionext,uniphier-ld11-ref
- const: socionext,uniphier-ld11
- description: LD20 SoC boards
items:
- enum:
- - socionext,uniphier-ld20-akebi96
- - socionext,uniphier-ld20-global
- - socionext,uniphier-ld20-ref
+ - socionext,uniphier-ld20-akebi96
+ - socionext,uniphier-ld20-global
+ - socionext,uniphier-ld20-ref
- const: socionext,uniphier-ld20
- description: PXs3 SoC boards
items:
- enum:
- - socionext,uniphier-pxs3-ref
+ - socionext,uniphier-pxs3-ref
- const: socionext,uniphier-pxs3
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
index 55f7938c4826..9f276bc9efa0 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -20,7 +20,7 @@ description: |
[2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
allOf:
- - $ref: /schemas/simple-bus.yaml#
+ - $ref: /schemas/simple-bus.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index baff80197d5a..cf5db5e273f3 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -14,9 +14,9 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - st,stm32mp157-syscfg
- - const: syscon
+ - enum:
+ - st,stm32mp157-syscfg
+ - const: syscon
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
index 2face46a5f64..d8b48f2edf1b 100644
--- a/Documentation/devicetree/bindings/arm/syna.txt
+++ b/Documentation/devicetree/bindings/arm/syna.txt
@@ -13,7 +13,7 @@ considered "unstable". Any Marvell Berlin device tree binding may change at any
time. Be sure to use a device tree binary and a kernel image generated from the
same source tree.
-Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
stable binding/ABI.
---------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
index f17bb353f65e..81534d04094b 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -323,7 +323,7 @@ examples:
tegra_pmc: pmc@7000e400 {
compatible = "nvidia,tegra210-pmc";
- reg = <0x0 0x7000e400 0x0 0x400>;
+ reg = <0x7000e400 0x400>;
clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
index bfc6357476fd..6451928dd2ce 100644
--- a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
+++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
@@ -26,8 +26,8 @@ properties:
oneOf:
- const: faraday,ftide010
- items:
- - const: cortina,gemini-pata
- - const: faraday,ftide010
+ - const: cortina,gemini-pata
+ - const: faraday,ftide010
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
index 7b69831060d8..d06096a7ba4b 100644
--- a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
+++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
@@ -17,6 +17,7 @@ properties:
- renesas,sata-r8a7779 # R-Car H1
- items:
- enum:
+ - renesas,sata-r8a7742 # RZ/G1H
- renesas,sata-r8a7790-es1 # R-Car H2 ES1
- renesas,sata-r8a7790 # R-Car H2 other than ES1
- renesas,sata-r8a7791 # R-Car M2-W
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
deleted file mode 100644
index aa83407cb7a4..000000000000
--- a/Documentation/devicetree/bindings/ata/sata_highbank.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* Calxeda AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-The Calxeda SATA controller mostly conforms to the AHCI interface
-with some special extensions to add functionality.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible : compatible list, contains "calxeda,hb-ahci"
-- interrupts : <interrupt mapping for SATA IRQ>
-- reg : <registers mapping>
-
-Optional properties:
-- dma-coherent : Present if dma operations are coherent
-- calxeda,port-phys : phandle-combophy and lane assignment, which maps each
- SATA port to a combophy and a lane within that
- combophy
-- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
- which indicates that the driver supports SGPIO
- indicator lights using the indicated GPIOs
-- calxeda,led-order : a u32 array that map port numbers to offsets within the
- SGPIO bitstream.
-- calxeda,tx-atten : a u32 array that contains TX attenuation override
- codes, one per port. The upper 3 bytes are always
- 0 and thus ignored.
-- calxeda,pre-clocks : a u32 that indicates the number of additional clock
- cycles to transmit before sending an SGPIO pattern
-- calxeda,post-clocks: a u32 that indicates the number of additional clock
- cycles to transmit after sending an SGPIO pattern
-
-Example:
- sata@ffe08000 {
- compatible = "calxeda,hb-ahci";
- reg = <0xffe08000 0x1000>;
- interrupts = <115>;
- dma-coherent;
- calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
- &combophy0 2 &combophy0 3>;
- calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
- calxeda,led-order = <4 0 1 2 3>;
- calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
- calxeda,pre-clocks = <10>;
- calxeda,post-clocks = <0>;
- };
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
new file mode 100644
index 000000000000..b195457006cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/sata_highbank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda AHCI SATA Controller
+
+description: |
+ The Calxeda SATA controller mostly conforms to the AHCI interface
+ with some special extensions to add functionality, to map GPIOs for
+ activity LEDs and for mapping the ComboPHYs.
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+ compatible:
+ const: calxeda,hb-ahci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dma-coherent: true
+
+ calxeda,pre-clocks:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Indicates the number of additional clock cycles to transmit before
+ sending an SGPIO pattern.
+
+ calxeda,post-clocks:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Indicates the number of additional clock cycles to transmit after
+ sending an SGPIO pattern.
+
+ calxeda,led-order:
+ description: Maps port numbers to offsets within the SGPIO bitstream.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 1
+ maxItems: 8
+
+ calxeda,port-phys:
+ description: |
+ phandle-combophy and lane assignment, which maps each SATA port to a
+ combophy and a lane within that combophy
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle-array
+ - minItems: 1
+ maxItems: 8
+
+ calxeda,tx-atten:
+ description: |
+ Contains TX attenuation override codes, one per port.
+ The upper 24 bits of each entry are always 0 and thus ignored.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 1
+ maxItems: 8
+
+ calxeda,sgpio-gpio:
+ description: |
+ phandle-gpio bank, bit offset, and default on or off, which indicates
+ that the driver supports SGPIO indicator lights using the indicated
+ GPIOs.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ sata@ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
+ dma-coherent;
+ calxeda,port-phys = <&combophy5 0>, <&combophy0 0>, <&combophy0 1>,
+ <&combophy0 2>, <&combophy0 3>;
+ calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, <&gpioh 7 1>;
+ calxeda,led-order = <4 0 1 2 3>;
+ calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
+ calxeda,pre-clocks = <10>;
+ calxeda,post-clocks = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt
deleted file mode 100644
index 2aa24b889923..000000000000
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-DT bindings for the Hitachi HD44780 Character LCD Controller
-
-The Hitachi HD44780 Character LCD Controller is commonly used on character LCDs
-that can display one or more lines of text. It exposes an M6800 bus interface,
-which can be used in either 4-bit or 8-bit mode.
-
-Required properties:
- - compatible: Must contain "hit,hd44780",
- - data-gpios: Must contain an array of either 4 or 8 GPIO specifiers,
- referring to the GPIO pins connected to the data signal lines DB0-DB7
- (8-bit mode) or DB4-DB7 (4-bit mode) of the LCD Controller's bus interface,
- - enable-gpios: Must contain a GPIO specifier, referring to the GPIO pin
- connected to the "E" (Enable) signal line of the LCD Controller's bus
- interface,
- - rs-gpios: Must contain a GPIO specifier, referring to the GPIO pin
- connected to the "RS" (Register Select) signal line of the LCD Controller's
- bus interface,
- - display-height-chars: Height of the display, in character cells,
- - display-width-chars: Width of the display, in character cells.
-
-Optional properties:
- - rw-gpios: Must contain a GPIO specifier, referring to the GPIO pin
- connected to the "RW" (Read/Write) signal line of the LCD Controller's bus
- interface,
- - backlight-gpios: Must contain a GPIO specifier, referring to the GPIO pin
- used for enabling the LCD's backlight,
- - internal-buffer-width: Internal buffer width (default is 40 for displays
- with 1 or 2 lines, and display-width-chars for displays with more than 2
- lines).
-
-Example:
-
- auxdisplay {
- compatible = "hit,hd44780";
-
- data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
- <&hc595 1 GPIO_ACTIVE_HIGH>,
- <&hc595 2 GPIO_ACTIVE_HIGH>,
- <&hc595 3 GPIO_ACTIVE_HIGH>;
- enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-
- display-height-chars = <2>;
- display-width-chars = <16>;
- };
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
new file mode 100644
index 000000000000..9222b06e93a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/hit,hd44780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hitachi HD44780 Character LCD Controller
+
+maintainers:
+ - Geert Uytterhoeven <geert@linux-m68k.org>
+
+description:
+ The Hitachi HD44780 Character LCD Controller is commonly used on character
+ LCDs that can display one or more lines of text. It exposes an M6800 bus
+ interface, which can be used in either 4-bit or 8-bit mode.
+
+properties:
+ compatible:
+ const: hit,hd44780
+
+ data-gpios:
+ description:
+ GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or
+ DB4-DB7 (4-bit mode) of the LCD Controller's bus interface.
+ oneOf:
+ - maxItems: 4
+ - maxItems: 8
+
+ enable-gpios:
+ description:
+ GPIO pin connected to the "E" (Enable) signal line of the LCD
+ Controller's bus interface.
+ maxItems: 1
+
+ rs-gpios:
+ description:
+ GPIO pin connected to the "RS" (Register Select) signal line of the LCD
+ Controller's bus interface.
+ maxItems: 1
+
+ rw-gpios:
+ description:
+ GPIO pin connected to the "RW" (Read/Write) signal line of the LCD
+ Controller's bus interface.
+ maxItems: 1
+
+ backlight-gpios:
+ description: GPIO pin used for enabling the LCD's backlight.
+ maxItems: 1
+
+ display-height-chars:
+ description: Height of the display, in character cells,
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 4
+
+ display-width-chars:
+ description: Width of the display, in character cells.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 64
+
+ internal-buffer-width:
+ description:
+ Internal buffer width (default is 40 for displays with 1 or 2 lines, and
+ display-width-chars for displays with more than 2 lines).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 64
+
+required:
+ - compatible
+ - data-gpios
+ - enable-gpios
+ - rs-gpios
+ - display-height-chars
+ - display-width-chars
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ auxdisplay {
+ compatible = "hit,hd44780";
+
+ data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+ <&hc595 1 GPIO_ACTIVE_HIGH>,
+ <&hc595 2 GPIO_ACTIVE_HIGH>,
+ <&hc595 3 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+ rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+
+ display-height-chars = <2>;
+ display-width-chars = <16>;
+ };
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
index f0b3d30fbb76..0503651cd214 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
@@ -31,12 +31,11 @@ properties:
maxItems: 1
allwinner,sram:
- allOf:
- - $ref: /schemas/types.yaml#definitions/phandle-array
- - maxItems: 1
description:
The SRAM that needs to be claimed to access the display engine
bus.
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ maxItems: 1
ranges: true
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
index 80973619342d..32d33b983d66 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -21,8 +21,8 @@ properties:
oneOf:
- const: allwinner,sun8i-a23-rsb
- items:
- - const: allwinner,sun8i-a83t-rsb
- - const: allwinner,sun8i-a23-rsb
+ - const: allwinner,sun8i-a83t-rsb
+ - const: allwinner,sun8i-a23-rsb
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
index ed1b2126a81b..9a37a357cb4e 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -52,12 +52,12 @@ properties:
- const: allwinner,sun4i-a10-dram-gates-clk
- items:
- - const: allwinner,sun5i-a13-dram-gates-clk
- - const: allwinner,sun4i-a10-gates-clk
+ - const: allwinner,sun5i-a13-dram-gates-clk
+ - const: allwinner,sun4i-a10-gates-clk
- items:
- - const: allwinner,sun8i-h3-apb0-gates-clk
- - const: allwinner,sun4i-a10-gates-clk
+ - const: allwinner,sun8i-h3-apb0-gates-clk
+ - const: allwinner,sun4i-a10-gates-clk
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
index 8559fe8f7efd..228c9313df53 100644
--- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
@@ -65,7 +65,7 @@ examples:
- |
uart0: serial@58018000 {
compatible = "snps,dw-apb-uart";
- reg = <0x0 0x58018000 0x0 0x2000>;
+ reg = <0x58018000 0x2000>;
clocks = <&clk 45>, <&clk 46>;
clock-names = "baudclk", "apb_pclk";
interrupts = <0 9 4>;
diff --git a/Documentation/devicetree/bindings/clock/calxeda.txt b/Documentation/devicetree/bindings/clock/calxeda.txt
deleted file mode 100644
index 0a6ac1bdcda1..000000000000
--- a/Documentation/devicetree/bindings/clock/calxeda.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Device Tree Clock bindings for Calxeda highbank platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
- "calxeda,hb-pll-clock" - for a PLL clock
- "calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the
- A9 clock.
- "calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.
- "calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.
-- reg : shall be the control register offset from SYSREGs base for the clock.
-- clocks : shall be the input parent clock phandle for the clock. This is
- either an oscillator or a pll output.
-- #clock-cells : from common clock binding; shall be set to 0.
diff --git a/Documentation/devicetree/bindings/clock/calxeda.yaml b/Documentation/devicetree/bindings/clock/calxeda.yaml
new file mode 100644
index 000000000000..a34cbf3c9aaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/calxeda.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/calxeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device Tree Clock bindings for Calxeda highbank platform
+
+description: |
+ This binding covers the Calxeda SoC internal peripheral and bus clocks
+ as used by peripherals. The clocks live inside the "system register"
+ region of the SoC, so are typically presented as children of an
+ "hb-sregs" node.
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - calxeda,hb-pll-clock
+ - calxeda,hb-a9periph-clock
+ - calxeda,hb-a9bus-clock
+ - calxeda,hb-emmc-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - clocks
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ sregs@3fffc000 {
+ compatible = "calxeda,hb-sregs";
+ reg = <0x3fffc000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333000>;
+ };
+
+ ddrpll: ddrpll@108 {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-pll-clock";
+ clocks = <&osc>;
+ reg = <0x108>;
+ };
+
+ a9pll: a9pll@100 {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-pll-clock";
+ clocks = <&osc>;
+ reg = <0x100>;
+ };
+
+ a9periphclk: a9periphclk@104 {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-a9periph-clock";
+ clocks = <&a9pll>;
+ reg = <0x104>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
deleted file mode 100644
index 52a064c789ee..000000000000
--- a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the clock portion of
-the driver.
-
-Also see these documents for generic binding information:
- [1] Clock : ../clock/clock-bindings.txt
-
-And these for relevant defines:
- [2] include/dt-bindings/clock/lochnagar.h
-
-This binding must be part of the Lochnagar MFD binding:
- [3] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
- - compatible : One of the following strings:
- "cirrus,lochnagar1-clk"
- "cirrus,lochnagar2-clk"
-
- - #clock-cells : Must be 1. The first cell indicates the clock
- number, see [2] for available clocks and [1].
-
-Optional properties:
-
- - clocks : Must contain an entry for each clock in clock-names.
- - clock-names : May contain entries for each of the following
- clocks:
- - ln-cdc-clkout : Output clock from CODEC card.
- - ln-dsp-clkout : Output clock from DSP card.
- - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
- input audio clocks from host system.
- - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
- external connector.
- - ln-spdif-mclk : Optional input audio clock from SPDIF.
- - ln-spdif-clkout : Optional input audio clock from SPDIF.
- - ln-adat-mclk : Optional input audio clock from ADAT.
- - ln-pmic-32k : On board fixed clock.
- - ln-clk-12m : On board fixed clock.
- - ln-clk-11m : On board fixed clock.
- - ln-clk-24m : On board fixed clock.
- - ln-clk-22m : On board fixed clock.
- - ln-clk-8m : On board fixed clock.
- - ln-usb-clk-24m : On board fixed clock.
- - ln-usb-clk-12m : On board fixed clock.
-
- - assigned-clocks : A list of Lochnagar clocks to be reparented, see
- [2] for available clocks.
- - assigned-clock-parents : Parents to be assigned to the clocks
- listed in "assigned-clocks".
-
-Optional nodes:
-
- - fixed-clock nodes may be registered for the following on board clocks:
- - ln-pmic-32k : 32768 Hz
- - ln-clk-12m : 12288000 Hz
- - ln-clk-11m : 11298600 Hz
- - ln-clk-24m : 24576000 Hz
- - ln-clk-22m : 22579200 Hz
- - ln-clk-8m : 8192000 Hz
- - ln-usb-clk-24m : 24576000 Hz
- - ln-usb-clk-12m : 12288000 Hz
-
-Example:
-
-lochnagar {
- lochnagar-clk {
- compatible = "cirrus,lochnagar2-clk";
-
- #clock-cells = <1>;
-
- clocks = <&clk-audio>, <&clk_pmic>;
- clock-names = "ln-gf-mclk2", "ln-pmic-32k";
-
- assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
- <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
- assigned-clock-parents = <&clk-audio>,
- <&clk-pmic>;
- };
-
- clk-pmic: clk-pmic {
- compatible = "fixed-clock";
- clock-cells = <0>;
- clock-frequency = <32768>;
- };
-};
diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..59de125647ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of various
+ application processor systems to provide a full evaluation platform.
+ Audio system topology, clocking and power can all be controlled through
+ the Lochnagar, allowing the device under test to be used in a variety of
+ possible use cases.
+
+ This binding document describes the binding for the clock portion of the
+ driver.
+
+ Also see these documents for generic binding information:
+ [1] Clock : ../clock/clock-bindings.txt
+
+ And these for relevant defines:
+ [2] include/dt-bindings/clock/lochnagar.h
+
+ This binding must be part of the Lochnagar MFD binding:
+ [3] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar1-clk
+ - cirrus,lochnagar2-clk
+
+ '#clock-cells':
+ description:
+ The first cell indicates the clock number, see [2] for available
+ clocks and [1].
+ const: 1
+
+ clock-names:
+ items:
+ enum:
+ - ln-cdc-clkout # Output clock from CODEC card.
+ - ln-dsp-clkout # Output clock from DSP card.
+ - ln-gf-mclk1 # Optional input clock from host system.
+ - ln-gf-mclk2 # Optional input clock from host system.
+ - ln-gf-mclk3 # Optional input clock from host system.
+ - ln-gf-mclk4 # Optional input clock from host system.
+ - ln-psia1-mclk # Optional input clock from external connector.
+ - ln-psia2-mclk # Optional input clock from external connector.
+ - ln-spdif-mclk # Optional input clock from SPDIF.
+ - ln-spdif-clkout # Optional input clock from SPDIF.
+ - ln-adat-mclk # Optional input clock from ADAT.
+ - ln-pmic-32k # On board fixed clock.
+ - ln-clk-12m # On board fixed clock.
+ - ln-clk-11m # On board fixed clock.
+ - ln-clk-24m # On board fixed clock.
+ - ln-clk-22m # On board fixed clock.
+ - ln-clk-8m # On board fixed clock.
+ - ln-usb-clk-24m # On board fixed clock.
+ - ln-usb-clk-12m # On board fixed clock.
+ minItems: 1
+ maxItems: 19
+
+ clocks: true
+ assigned-clocks: true
+ assigned-clock-parents: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - '#clock-cells'
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
index b567f8092f8c..f415845b38dd 100644
--- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
@@ -24,9 +24,8 @@ properties:
clock-div:
description: Fixed divider
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
clock-mult:
description: Fixed multiplier
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
index a203d5d498db..9ac716dfa602 100644
--- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -28,15 +28,14 @@ properties:
const: 0
fsl,vco-hz:
- description: Optional for VCO frequency of the PLL in Hertz.
- The VCO frequency of this PLL cannot be changed during runtime
- only at startup. Therefore, the output frequencies are very
- limited and might not even closely match the requested frequency.
- To work around this restriction the user may specify its own
- desired VCO frequency for the PLL.
- minimum: 650000000
- maximum: 1300000000
- default: 1188000000
+ description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+ of this PLL cannot be changed during runtime only at startup. Therefore,
+ the output frequencies are very limited and might not even closely match
+ the requested frequency. To work around this restriction the user may specify
+ its own desired VCO frequency for the PLL.
+ minimum: 650000000
+ maximum: 1300000000
+ default: 1188000000
required:
- compatible
@@ -51,7 +50,7 @@ examples:
- |
dpclk: clock-display@f1f0000 {
compatible = "fsl,ls1028a-plldig";
- reg = <0x0 0xf1f0000 0x0 0xffff>;
+ reg = <0xf1f0000 0xffff>;
#clock-cells = <0>;
clocks = <&osc_27m>;
};
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt
deleted file mode 100644
index 9823baf7acb6..000000000000
--- a/Documentation/devicetree/bindings/clock/imx1-clock.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Clock bindings for Freescale i.MX1 CPUs
-
-Required properties:
-- compatible: Should be "fsl,imx1-ccm".
-- reg: Address and length of the register set.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
-for the full list of i.MX1 clock IDs.
-
-Examples:
- clks: ccm@21b000 {
- #clock-cells = <1>;
- compatible = "fsl,imx1-ccm";
- reg = <0x0021b000 0x1000>;
- };
-
- pwm: pwm@208000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx1-pwm";
- reg = <0x00208000 0x1000>;
- interrupts = <34>;
- clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
new file mode 100644
index 000000000000..f4833a29b79e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX1 CPUs
+
+maintainers:
+ - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+ for the full list of i.MX1 clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx1-ccm
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx1-clock.h>
+
+ clock-controller@21b000 {
+ #clock-cells = <1>;
+ compatible = "fsl,imx1-ccm";
+ reg = <0x0021b000 0x1000>;
+ };
+
+ pwm@208000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx1-pwm";
+ reg = <0x00208000 0x1000>;
+ interrupts = <34>;
+ clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt
deleted file mode 100644
index 806f63d628bd..000000000000
--- a/Documentation/devicetree/bindings/clock/imx21-clock.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Clock bindings for Freescale i.MX21
-
-Required properties:
-- compatible : Should be "fsl,imx21-ccm".
-- reg : Address and length of the register set.
-- interrupts : Should contain CCM interrupt.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
-for the full list of i.MX21 clock IDs.
-
-Examples:
- clks: ccm@10027000{
- compatible = "fsl,imx21-ccm";
- reg = <0x10027000 0x800>;
- #clock-cells = <1>;
- };
-
- uart1: serial@1000a000 {
- compatible = "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
- <&clks IMX21_CLK_PER1>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
new file mode 100644
index 000000000000..518ad9a4733c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX21
+
+maintainers:
+ - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+ for the full list of i.MX21 clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx21-ccm
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx21-clock.h>
+
+ clock-controller@10027000 {
+ compatible = "fsl,imx21-ccm";
+ reg = <0x10027000 0x800>;
+ #clock-cells = <1>;
+ };
+
+ serial@1000a000 {
+ compatible = "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+ <&clks IMX21_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
deleted file mode 100644
index 8385348d3bd9..000000000000
--- a/Documentation/devicetree/bindings/clock/imx23-clock.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Clock bindings for Freescale i.MX23
-
-Required properties:
-- compatible: Should be "fsl,imx23-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX23
-clocks and IDs.
-
- Clock ID
- ------------------
- ref_xtal 0
- pll 1
- ref_cpu 2
- ref_emi 3
- ref_pix 4
- ref_io 5
- saif_sel 6
- lcdif_sel 7
- gpmi_sel 8
- ssp_sel 9
- emi_sel 10
- cpu 11
- etm_sel 12
- cpu_pll 13
- cpu_xtal 14
- hbus 15
- xbus 16
- lcdif_div 17
- ssp_div 18
- gpmi_div 19
- emi_pll 20
- emi_xtal 21
- etm_div 22
- saif_div 23
- clk32k_div 24
- rtc 25
- adc 26
- spdif_div 27
- clk32k 28
- dri 29
- pwm 30
- filt 31
- uart 32
- ssp 33
- gpmi 34
- spdif 35
- emi 36
- saif 37
- lcdif 38
- etm 39
- usb 40
- usb_phy 41
-
-Examples:
-
-clks: clkctrl@80040000 {
- compatible = "fsl,imx23-clkctrl";
- reg = <0x80040000 0x2000>;
- #clock-cells = <1>;
-};
-
-auart0: serial@8006c000 {
- compatible = "fsl,imx23-auart";
- reg = <0x8006c000 0x2000>;
- interrupts = <24 25 23>;
- clocks = <&clks 32>;
-};
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
new file mode 100644
index 000000000000..66cb238a1040
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX23
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX23
+ clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll 1
+ ref_cpu 2
+ ref_emi 3
+ ref_pix 4
+ ref_io 5
+ saif_sel 6
+ lcdif_sel 7
+ gpmi_sel 8
+ ssp_sel 9
+ emi_sel 10
+ cpu 11
+ etm_sel 12
+ cpu_pll 13
+ cpu_xtal 14
+ hbus 15
+ xbus 16
+ lcdif_div 17
+ ssp_div 18
+ gpmi_div 19
+ emi_pll 20
+ emi_xtal 21
+ etm_div 22
+ saif_div 23
+ clk32k_div 24
+ rtc 25
+ adc 26
+ spdif_div 27
+ clk32k 28
+ dri 29
+ pwm 30
+ filt 31
+ uart 32
+ ssp 33
+ gpmi 34
+ spdif 35
+ emi 36
+ saif 37
+ lcdif 38
+ etm 39
+ usb 40
+ usb_phy 41
+
+properties:
+ compatible:
+ const: fsl,imx23-clkctrl
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@80040000 {
+ compatible = "fsl,imx23-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ serial@8006c000 {
+ compatible = "fsl,imx23-auart";
+ reg = <0x8006c000 0x2000>;
+ interrupts = <24 25 23>;
+ clocks = <&clks 32>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
deleted file mode 100644
index f8135ea9ca4e..000000000000
--- a/Documentation/devicetree/bindings/clock/imx25-clock.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-* Clock bindings for Freescale i.MX25
-
-Required properties:
-- compatible: Should be "fsl,imx25-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX25
-clocks and IDs.
-
- Clock ID
- ---------------------------
- dummy 0
- osc 1
- mpll 2
- upll 3
- mpll_cpu_3_4 4
- cpu_sel 5
- cpu 6
- ahb 7
- usb_div 8
- ipg 9
- per0_sel 10
- per1_sel 11
- per2_sel 12
- per3_sel 13
- per4_sel 14
- per5_sel 15
- per6_sel 16
- per7_sel 17
- per8_sel 18
- per9_sel 19
- per10_sel 20
- per11_sel 21
- per12_sel 22
- per13_sel 23
- per14_sel 24
- per15_sel 25
- per0 26
- per1 27
- per2 28
- per3 29
- per4 30
- per5 31
- per6 32
- per7 33
- per8 34
- per9 35
- per10 36
- per11 37
- per12 38
- per13 39
- per14 40
- per15 41
- csi_ipg_per 42
- epit_ipg_per 43
- esai_ipg_per 44
- esdhc1_ipg_per 45
- esdhc2_ipg_per 46
- gpt_ipg_per 47
- i2c_ipg_per 48
- lcdc_ipg_per 49
- nfc_ipg_per 50
- owire_ipg_per 51
- pwm_ipg_per 52
- sim1_ipg_per 53
- sim2_ipg_per 54
- ssi1_ipg_per 55
- ssi2_ipg_per 56
- uart_ipg_per 57
- ata_ahb 58
- reserved 59
- csi_ahb 60
- emi_ahb 61
- esai_ahb 62
- esdhc1_ahb 63
- esdhc2_ahb 64
- fec_ahb 65
- lcdc_ahb 66
- rtic_ahb 67
- sdma_ahb 68
- slcdc_ahb 69
- usbotg_ahb 70
- reserved 71
- reserved 72
- reserved 73
- reserved 74
- can1_ipg 75
- can2_ipg 76
- csi_ipg 77
- cspi1_ipg 78
- cspi2_ipg 79
- cspi3_ipg 80
- dryice_ipg 81
- ect_ipg 82
- epit1_ipg 83
- epit2_ipg 84
- reserved 85
- esdhc1_ipg 86
- esdhc2_ipg 87
- fec_ipg 88
- reserved 89
- reserved 90
- reserved 91
- gpt1_ipg 92
- gpt2_ipg 93
- gpt3_ipg 94
- gpt4_ipg 95
- reserved 96
- reserved 97
- reserved 98
- iim_ipg 99
- reserved 100
- reserved 101
- kpp_ipg 102
- lcdc_ipg 103
- reserved 104
- pwm1_ipg 105
- pwm2_ipg 106
- pwm3_ipg 107
- pwm4_ipg 108
- rngb_ipg 109
- reserved 110
- scc_ipg 111
- sdma_ipg 112
- sim1_ipg 113
- sim2_ipg 114
- slcdc_ipg 115
- spba_ipg 116
- ssi1_ipg 117
- ssi2_ipg 118
- tsc_ipg 119
- uart1_ipg 120
- uart2_ipg 121
- uart3_ipg 122
- uart4_ipg 123
- uart5_ipg 124
- reserved 125
- wdt_ipg 126
- cko_div 127
- cko_sel 128
- cko 129
-
-Examples:
-
-clks: ccm@53f80000 {
- compatible = "fsl,imx25-ccm";
- reg = <0x53f80000 0x4000>;
- interrupts = <31>;
-};
-
-uart1: serial@43f90000 {
- compatible = "fsl,imx25-uart", "fsl,imx21-uart";
- reg = <0x43f90000 0x4000>;
- interrupts = <45>;
- clocks = <&clks 79>, <&clks 50>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
new file mode 100644
index 000000000000..2a2b10778e72
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX25
+
+maintainers:
+ - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX25
+ clocks and IDs.
+
+ Clock ID
+ --------------------------
+ dummy 0
+ osc 1
+ mpll 2
+ upll 3
+ mpll_cpu_3_4 4
+ cpu_sel 5
+ cpu 6
+ ahb 7
+ usb_div 8
+ ipg 9
+ per0_sel 10
+ per1_sel 11
+ per2_sel 12
+ per3_sel 13
+ per4_sel 14
+ per5_sel 15
+ per6_sel 16
+ per7_sel 17
+ per8_sel 18
+ per9_sel 19
+ per10_sel 20
+ per11_sel 21
+ per12_sel 22
+ per13_sel 23
+ per14_sel 24
+ per15_sel 25
+ per0 26
+ per1 27
+ per2 28
+ per3 29
+ per4 30
+ per5 31
+ per6 32
+ per7 33
+ per8 34
+ per9 35
+ per10 36
+ per11 37
+ per12 38
+ per13 39
+ per14 40
+ per15 41
+ csi_ipg_per 42
+ epit_ipg_per 43
+ esai_ipg_per 44
+ esdhc1_ipg_per 45
+ esdhc2_ipg_per 46
+ gpt_ipg_per 47
+ i2c_ipg_per 48
+ lcdc_ipg_per 49
+ nfc_ipg_per 50
+ owire_ipg_per 51
+ pwm_ipg_per 52
+ sim1_ipg_per 53
+ sim2_ipg_per 54
+ ssi1_ipg_per 55
+ ssi2_ipg_per 56
+ uart_ipg_per 57
+ ata_ahb 58
+ reserved 59
+ csi_ahb 60
+ emi_ahb 61
+ esai_ahb 62
+ esdhc1_ahb 63
+ esdhc2_ahb 64
+ fec_ahb 65
+ lcdc_ahb 66
+ rtic_ahb 67
+ sdma_ahb 68
+ slcdc_ahb 69
+ usbotg_ahb 70
+ reserved 71
+ reserved 72
+ reserved 73
+ reserved 74
+ can1_ipg 75
+ can2_ipg 76
+ csi_ipg 77
+ cspi1_ipg 78
+ cspi2_ipg 79
+ cspi3_ipg 80
+ dryice_ipg 81
+ ect_ipg 82
+ epit1_ipg 83
+ epit2_ipg 84
+ reserved 85
+ esdhc1_ipg 86
+ esdhc2_ipg 87
+ fec_ipg 88
+ reserved 89
+ reserved 90
+ reserved 91
+ gpt1_ipg 92
+ gpt2_ipg 93
+ gpt3_ipg 94
+ gpt4_ipg 95
+ reserved 96
+ reserved 97
+ reserved 98
+ iim_ipg 99
+ reserved 100
+ reserved 101
+ kpp_ipg 102
+ lcdc_ipg 103
+ reserved 104
+ pwm1_ipg 105
+ pwm2_ipg 106
+ pwm3_ipg 107
+ pwm4_ipg 108
+ rngb_ipg 109
+ reserved 110
+ scc_ipg 111
+ sdma_ipg 112
+ sim1_ipg 113
+ sim2_ipg 114
+ slcdc_ipg 115
+ spba_ipg 116
+ ssi1_ipg 117
+ ssi2_ipg 118
+ tsc_ipg 119
+ uart1_ipg 120
+ uart2_ipg 121
+ uart3_ipg 122
+ uart4_ipg 123
+ uart5_ipg 124
+ reserved 125
+ wdt_ipg 126
+ cko_div 127
+ cko_sel 128
+ cko 129
+
+properties:
+ compatible:
+ const: fsl,imx25-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 79>, <&clks 50>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
deleted file mode 100644
index 4c95c048d3b2..000000000000
--- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Clock bindings for Freescale i.MX27
-
-Required properties:
-- compatible: Should be "fsl,imx27-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
-for the full list of i.MX27 clock IDs.
-
-Examples:
- clks: ccm@10027000{
- compatible = "fsl,imx27-ccm";
- reg = <0x10027000 0x1000>;
- #clock-cells = <1>;
- };
-
- uart1: serial@1000a000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
- <&clks IMX27_CLK_PER1_GATE>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
new file mode 100644
index 000000000000..b5f3ed084ea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX27
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+ for the full list of i.MX27 clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx27-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx27-clock.h>
+
+ clock-controller@10027000 {
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ serial@1000a000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
deleted file mode 100644
index d84a37d2885f..000000000000
--- a/Documentation/devicetree/bindings/clock/imx28-clock.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Clock bindings for Freescale i.MX28
-
-Required properties:
-- compatible: Should be "fsl,imx28-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX28
-clocks and IDs.
-
- Clock ID
- ------------------
- ref_xtal 0
- pll0 1
- pll1 2
- pll2 3
- ref_cpu 4
- ref_emi 5
- ref_io0 6
- ref_io1 7
- ref_pix 8
- ref_hsadc 9
- ref_gpmi 10
- saif0_sel 11
- saif1_sel 12
- gpmi_sel 13
- ssp0_sel 14
- ssp1_sel 15
- ssp2_sel 16
- ssp3_sel 17
- emi_sel 18
- etm_sel 19
- lcdif_sel 20
- cpu 21
- ptp_sel 22
- cpu_pll 23
- cpu_xtal 24
- hbus 25
- xbus 26
- ssp0_div 27
- ssp1_div 28
- ssp2_div 29
- ssp3_div 30
- gpmi_div 31
- emi_pll 32
- emi_xtal 33
- lcdif_div 34
- etm_div 35
- ptp 36
- saif0_div 37
- saif1_div 38
- clk32k_div 39
- rtc 40
- lradc 41
- spdif_div 42
- clk32k 43
- pwm 44
- uart 45
- ssp0 46
- ssp1 47
- ssp2 48
- ssp3 49
- gpmi 50
- spdif 51
- emi 52
- saif0 53
- saif1 54
- lcdif 55
- etm 56
- fec 57
- can0 58
- can1 59
- usb0 60
- usb1 61
- usb0_phy 62
- usb1_phy 63
- enet_out 64
-
-Examples:
-
-clks: clkctrl@80040000 {
- compatible = "fsl,imx28-clkctrl";
- reg = <0x80040000 0x2000>;
- #clock-cells = <1>;
-};
-
-auart0: serial@8006a000 {
- compatible = "fsl,imx28-auart", "fsl,imx23-auart";
- reg = <0x8006a000 0x2000>;
- interrupts = <112 70 71>;
- clocks = <&clks 45>;
-};
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
new file mode 100644
index 000000000000..72328d5ca09a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX28
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX28
+ clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll0 1
+ pll1 2
+ pll2 3
+ ref_cpu 4
+ ref_emi 5
+ ref_io0 6
+ ref_io1 7
+ ref_pix 8
+ ref_hsadc 9
+ ref_gpmi 10
+ saif0_sel 11
+ saif1_sel 12
+ gpmi_sel 13
+ ssp0_sel 14
+ ssp1_sel 15
+ ssp2_sel 16
+ ssp3_sel 17
+ emi_sel 18
+ etm_sel 19
+ lcdif_sel 20
+ cpu 21
+ ptp_sel 22
+ cpu_pll 23
+ cpu_xtal 24
+ hbus 25
+ xbus 26
+ ssp0_div 27
+ ssp1_div 28
+ ssp2_div 29
+ ssp3_div 30
+ gpmi_div 31
+ emi_pll 32
+ emi_xtal 33
+ lcdif_div 34
+ etm_div 35
+ ptp 36
+ saif0_div 37
+ saif1_div 38
+ clk32k_div 39
+ rtc 40
+ lradc 41
+ spdif_div 42
+ clk32k 43
+ pwm 44
+ uart 45
+ ssp0 46
+ ssp1 47
+ ssp2 48
+ ssp3 49
+ gpmi 50
+ spdif 51
+ emi 52
+ saif0 53
+ saif1 54
+ lcdif 55
+ etm 56
+ fec 57
+ can0 58
+ can1 59
+ usb0 60
+ usb1 61
+ usb0_phy 62
+ usb1_phy 63
+ enet_out 64
+
+properties:
+ compatible:
+ const: fsl,imx28-clkctrl
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@80040000 {
+ compatible = "fsl,imx28-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+ clocks = <&clks 45>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt
deleted file mode 100644
index 0a291090e562..000000000000
--- a/Documentation/devicetree/bindings/clock/imx31-clock.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* Clock bindings for Freescale i.MX31
-
-Required properties:
-- compatible: Should be "fsl,imx31-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX31
-clocks and IDs.
-
- Clock ID
- -----------------------
- dummy 0
- ckih 1
- ckil 2
- mpll 3
- spll 4
- upll 5
- mcu_main 6
- hsp 7
- ahb 8
- nfc 9
- ipg 10
- per_div 11
- per 12
- csi_sel 13
- fir_sel 14
- csi_div 15
- usb_div_pre 16
- usb_div_post 17
- fir_div_pre 18
- fir_div_post 19
- sdhc1_gate 20
- sdhc2_gate 21
- gpt_gate 22
- epit1_gate 23
- epit2_gate 24
- iim_gate 25
- ata_gate 26
- sdma_gate 27
- cspi3_gate 28
- rng_gate 29
- uart1_gate 30
- uart2_gate 31
- ssi1_gate 32
- i2c1_gate 33
- i2c2_gate 34
- i2c3_gate 35
- hantro_gate 36
- mstick1_gate 37
- mstick2_gate 38
- csi_gate 39
- rtc_gate 40
- wdog_gate 41
- pwm_gate 42
- sim_gate 43
- ect_gate 44
- usb_gate 45
- kpp_gate 46
- ipu_gate 47
- uart3_gate 48
- uart4_gate 49
- uart5_gate 50
- owire_gate 51
- ssi2_gate 52
- cspi1_gate 53
- cspi2_gate 54
- gacc_gate 55
- emi_gate 56
- rtic_gate 57
- firi_gate 58
-
-Examples:
-
-clks: ccm@53f80000{
- compatible = "fsl,imx31-ccm";
- reg = <0x53f80000 0x4000>;
- interrupts = <31>, <53>;
- #clock-cells = <1>;
-};
-
-uart1: serial@43f90000 {
- compatible = "fsl,imx31-uart", "fsl,imx21-uart";
- reg = <0x43f90000 0x4000>;
- interrupts = <45>;
- clocks = <&clks 10>, <&clks 30>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
new file mode 100644
index 000000000000..1b6f75d3928a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX31
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX31
+ clocks and IDs.
+
+ Clock ID
+ -----------------------
+ dummy 0
+ ckih 1
+ ckil 2
+ mpll 3
+ spll 4
+ upll 5
+ mcu_main 6
+ hsp 7
+ ahb 8
+ nfc 9
+ ipg 10
+ per_div 11
+ per 12
+ csi_sel 13
+ fir_sel 14
+ csi_div 15
+ usb_div_pre 16
+ usb_div_post 17
+ fir_div_pre 18
+ fir_div_post 19
+ sdhc1_gate 20
+ sdhc2_gate 21
+ gpt_gate 22
+ epit1_gate 23
+ epit2_gate 24
+ iim_gate 25
+ ata_gate 26
+ sdma_gate 27
+ cspi3_gate 28
+ rng_gate 29
+ uart1_gate 30
+ uart2_gate 31
+ ssi1_gate 32
+ i2c1_gate 33
+ i2c2_gate 34
+ i2c3_gate 35
+ hantro_gate 36
+ mstick1_gate 37
+ mstick2_gate 38
+ csi_gate 39
+ rtc_gate 40
+ wdog_gate 41
+ pwm_gate 42
+ sim_gate 43
+ ect_gate 44
+ usb_gate 45
+ kpp_gate 46
+ ipu_gate 47
+ uart3_gate 48
+ uart4_gate 49
+ uart5_gate 50
+ owire_gate 51
+ ssi2_gate 52
+ cspi1_gate 53
+ cspi2_gate 54
+ gacc_gate 55
+ emi_gate 56
+ rtic_gate 57
+ firi_gate 58
+
+properties:
+ compatible:
+ const: fsl,imx31-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for DVFS when a frequency change is requested, request 2 is
+ to generate interrupt for DPTC when a voltage change is requested.
+ items:
+ - description: CCM DVFS interrupt request 1
+ - description: CCM DPTC interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@53f80000 {
+ compatible = "fsl,imx31-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>, <53>;
+ #clock-cells = <1>;
+ };
+
+ serial@43f90000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 10>, <&clks 30>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt
deleted file mode 100644
index f49783213c56..000000000000
--- a/Documentation/devicetree/bindings/clock/imx35-clock.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-* Clock bindings for Freescale i.MX35
-
-Required properties:
-- compatible: Should be "fsl,imx35-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX35
-clocks and IDs.
-
- Clock ID
- ---------------------------
- ckih 0
- mpll 1
- ppll 2
- mpll_075 3
- arm 4
- hsp 5
- hsp_div 6
- hsp_sel 7
- ahb 8
- ipg 9
- arm_per_div 10
- ahb_per_div 11
- ipg_per 12
- uart_sel 13
- uart_div 14
- esdhc_sel 15
- esdhc1_div 16
- esdhc2_div 17
- esdhc3_div 18
- spdif_sel 19
- spdif_div_pre 20
- spdif_div_post 21
- ssi_sel 22
- ssi1_div_pre 23
- ssi1_div_post 24
- ssi2_div_pre 25
- ssi2_div_post 26
- usb_sel 27
- usb_div 28
- nfc_div 29
- asrc_gate 30
- pata_gate 31
- audmux_gate 32
- can1_gate 33
- can2_gate 34
- cspi1_gate 35
- cspi2_gate 36
- ect_gate 37
- edio_gate 38
- emi_gate 39
- epit1_gate 40
- epit2_gate 41
- esai_gate 42
- esdhc1_gate 43
- esdhc2_gate 44
- esdhc3_gate 45
- fec_gate 46
- gpio1_gate 47
- gpio2_gate 48
- gpio3_gate 49
- gpt_gate 50
- i2c1_gate 51
- i2c2_gate 52
- i2c3_gate 53
- iomuxc_gate 54
- ipu_gate 55
- kpp_gate 56
- mlb_gate 57
- mshc_gate 58
- owire_gate 59
- pwm_gate 60
- rngc_gate 61
- rtc_gate 62
- rtic_gate 63
- scc_gate 64
- sdma_gate 65
- spba_gate 66
- spdif_gate 67
- ssi1_gate 68
- ssi2_gate 69
- uart1_gate 70
- uart2_gate 71
- uart3_gate 72
- usbotg_gate 73
- wdog_gate 74
- max_gate 75
- admux_gate 76
- csi_gate 77
- csi_div 78
- csi_sel 79
- iim_gate 80
- gpu2d_gate 81
- ckli_gate 82
-
-Examples:
-
-clks: ccm@53f80000 {
- compatible = "fsl,imx35-ccm";
- reg = <0x53f80000 0x4000>;
- interrupts = <31>;
- #clock-cells = <1>;
-};
-
-esdhc1: esdhc@53fb4000 {
- compatible = "fsl,imx35-esdhc";
- reg = <0x53fb4000 0x4000>;
- interrupts = <7>;
- clocks = <&clks 9>, <&clks 8>, <&clks 43>;
- clock-names = "ipg", "ahb", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
new file mode 100644
index 000000000000..bd871da6fc7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX35
+
+maintainers:
+ - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX35
+ clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ ckih 0
+ mpll 1
+ ppll 2
+ mpll_075 3
+ arm 4
+ hsp 5
+ hsp_div 6
+ hsp_sel 7
+ ahb 8
+ ipg 9
+ arm_per_div 10
+ ahb_per_div 11
+ ipg_per 12
+ uart_sel 13
+ uart_div 14
+ esdhc_sel 15
+ esdhc1_div 16
+ esdhc2_div 17
+ esdhc3_div 18
+ spdif_sel 19
+ spdif_div_pre 20
+ spdif_div_post 21
+ ssi_sel 22
+ ssi1_div_pre 23
+ ssi1_div_post 24
+ ssi2_div_pre 25
+ ssi2_div_post 26
+ usb_sel 27
+ usb_div 28
+ nfc_div 29
+ asrc_gate 30
+ pata_gate 31
+ audmux_gate 32
+ can1_gate 33
+ can2_gate 34
+ cspi1_gate 35
+ cspi2_gate 36
+ ect_gate 37
+ edio_gate 38
+ emi_gate 39
+ epit1_gate 40
+ epit2_gate 41
+ esai_gate 42
+ esdhc1_gate 43
+ esdhc2_gate 44
+ esdhc3_gate 45
+ fec_gate 46
+ gpio1_gate 47
+ gpio2_gate 48
+ gpio3_gate 49
+ gpt_gate 50
+ i2c1_gate 51
+ i2c2_gate 52
+ i2c3_gate 53
+ iomuxc_gate 54
+ ipu_gate 55
+ kpp_gate 56
+ mlb_gate 57
+ mshc_gate 58
+ owire_gate 59
+ pwm_gate 60
+ rngc_gate 61
+ rtc_gate 62
+ rtic_gate 63
+ scc_gate 64
+ sdma_gate 65
+ spba_gate 66
+ spdif_gate 67
+ ssi1_gate 68
+ ssi2_gate 69
+ uart1_gate 70
+ uart2_gate 71
+ uart3_gate 72
+ usbotg_gate 73
+ wdog_gate 74
+ max_gate 75
+ admux_gate 76
+ csi_gate 77
+ csi_div 78
+ csi_sel 79
+ iim_gate 80
+ gpu2d_gate 81
+ ckli_gate 82
+
+properties:
+ compatible:
+ const: fsl,imx35-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@53f80000 {
+ compatible = "fsl,imx35-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ esdhc@53fb4000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <7>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+ clock-names = "ipg", "ahb", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
deleted file mode 100644
index a24ca9e582d2..000000000000
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Clock bindings for Freescale i.MX5
-
-Required properties:
-- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
-for the full list of i.MX5 clock IDs.
-
-Examples (for mx53):
-
-clks: ccm@53fd4000{
- compatible = "fsl,imx53-ccm";
- reg = <0x53fd4000 0x4000>;
- interrupts = <0 71 0x04 0 72 0x04>;
- #clock-cells = <1>;
-};
-
-can1: can@53fc8000 {
- compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
- reg = <0x53fc8000 0x4000>;
- interrupts = <82>;
- clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
new file mode 100644
index 000000000000..f5c2b3d7a910
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX5
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+ for the full list of i.MX5 clock IDs.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx53-ccm
+ - fsl,imx51-ccm
+ - fsl,imx50-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx5-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+ <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
+
+ can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
deleted file mode 100644
index 13d36d4c6991..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Clock bindings for Freescale i.MX6 Quad
-
-Required properties:
-- compatible: Should be "fsl,imx6q-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-Optional properties:
-- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
- on power off.
- Use this property if the SoC should be powered off by external power
- management IC (PMIC) triggered via PMIC_STBY_REQ signal.
- Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
- be using "syscon-poweroff" driver instead.
-- clocks: list of clock specifiers, must contain an entry for each entry
- in clock-names
-- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
-for the full list of i.MX6 Quad and DualLite clock IDs.
-
-Examples:
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-clks: ccm@20c4000 {
- compatible = "fsl,imx6q-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <0 87 0x04 0 88 0x04>;
- #clock-cells = <1>;
-};
-
-uart1: serial@2020000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <0 26 0x04>;
- clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
new file mode 100644
index 000000000000..429e3b62b965
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 Quad
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6q-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 24m osc
+ - description: 32k osc
+ - description: ckih1 clock input
+ - description: anaclk1 clock input
+ - description: anaclk2 clock input
+
+ clock-names:
+ items:
+ - const: osc
+ - const: ckil
+ - const: ckih1
+ - const: anaclk1
+ - const: anaclk2
+
+ fsl,pmic-stby-poweroff:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Use this property if the SoC should be powered off by external power
+ management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+ Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+ be using "syscon-poweroff" driver instead.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt
deleted file mode 100644
index 15e40bdf147d..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-* Clock bindings for Freescale i.MX6 SoloLite
-
-Required properties:
-- compatible: Should be "fsl,imx6sl-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sl-clock.h
-for the full list of i.MX6 SoloLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
new file mode 100644
index 000000000000..135568c46350
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloLite
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6sl-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6sl-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
deleted file mode 100644
index fee849d5fdd1..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Clock bindings for Freescale i.MX6 SLL
-
-Required properties:
-- compatible: Should be "fsl,imx6sll-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
- entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h
-for the full list of i.MX6 SLL clock IDs.
-
-Examples:
-
-#include <dt-bindings/clock/imx6sll-clock.h>
-
-clks: clock-controller@20c4000 {
- compatible = "fsl,imx6sll-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <1>;
- clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
- clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
-};
-
-uart1: serial@2020000 {
- compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
- <&clks IMX6SLL_CLK_UART1_SERIAL>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
new file mode 100644
index 000000000000..fa55f1ce3e57
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SLL
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6sll-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ipp_di0 clock input
+ - description: ipp_di1 clock input
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+ - const: ipp_di0
+ - const: ipp_di1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6sll-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt b/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
deleted file mode 100644
index 22362b9b7ba3..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Clock bindings for Freescale i.MX6 SoloX
-
-Required properties:
-- compatible: Should be "fsl,imx6sx-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
- entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sx-clock.h
-for the full list of i.MX6 SoloX clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
new file mode 100644
index 000000000000..982d698e8c54
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloX
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6sx-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ipp_di0 clock input
+ - description: ipp_di1 clock input
+ - description: anaclk1 clock input
+ - description: anaclk2 clock input
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+ - const: ipp_di0
+ - const: ipp_di1
+ - const: anaclk1
+ - const: anaclk2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6sx-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
deleted file mode 100644
index 571d5039f663..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Clock bindings for Freescale i.MX6 UltraLite
-
-Required properties:
-- compatible: Should be "fsl,imx6ul-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
- entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h
-for the full list of i.MX6 UltraLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
new file mode 100644
index 000000000000..3c779eea6394
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 UltraLite
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6ul-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ipp_di0 clock input
+ - description: ipp_di1 clock input
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+ - const: ipp_di0
+ - const: ipp_di1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6ul-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.txt b/Documentation/devicetree/bindings/clock/imx7d-clock.txt
deleted file mode 100644
index 9d3026d81a68..000000000000
--- a/Documentation/devicetree/bindings/clock/imx7d-clock.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Clock bindings for Freescale i.MX7 Dual
-
-Required properties:
-- compatible: Should be "fsl,imx7d-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
- entry in clock-names
-- clock-names: should include entries "ckil", "osc"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h
-for the full list of i.MX7 Dual clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
new file mode 100644
index 000000000000..cefb61db01a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX7 Dual
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+ - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h
+ for the full list of i.MX7 Dual clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx7d-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@30380000 {
+ compatible = "fsl,imx7d-ccm";
+ reg = <0x30380000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>;
+ clock-names = "ckil", "osc";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
deleted file mode 100644
index 965cfa42e025..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
-
-The Low-Power Clock Gate (LPCG) modules contain a local programming
-model to control the clock gates for the peripherals. An LPCG module
-is used to locally gate the clocks for the associated peripheral.
-
-Note:
-This level of clock gating is provided after the clocks are generated
-by the SCU resources and clock controls. Thus even if the clock is
-enabled by these control bits, it might still not be running based
-on the base resource.
-
-Required properties:
-- compatible: Should be one of:
- "fsl,imx8qxp-lpcg-adma",
- "fsl,imx8qxp-lpcg-conn",
- "fsl,imx8qxp-lpcg-dc",
- "fsl,imx8qxp-lpcg-dsp",
- "fsl,imx8qxp-lpcg-gpu",
- "fsl,imx8qxp-lpcg-hsio",
- "fsl,imx8qxp-lpcg-img",
- "fsl,imx8qxp-lpcg-lsio",
- "fsl,imx8qxp-lpcg-vpu"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Examples:
-
-#include <dt-bindings/clock/imx8qxp-clock.h>
-
-conn_lpcg: clock-controller@5b200000 {
- compatible = "fsl,imx8qxp-lpcg-conn";
- reg = <0x5b200000 0xb0000>;
- #clock-cells = <1>;
-};
-
-usdhc1: mmc@5b010000 {
- compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x5b010000 0x10000>;
- clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>,
- <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>,
- <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>;
- clock-names = "ipg", "per", "ahb";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
new file mode 100644
index 000000000000..33f3010f48c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+
+maintainers:
+ - Aisheng Dong <aisheng.dong@nxp.com>
+
+description: |
+ The Low-Power Clock Gate (LPCG) modules contain a local programming
+ model to control the clock gates for the peripherals. An LPCG module
+ is used to locally gate the clocks for the associated peripheral.
+
+ This level of clock gating is provided after the clocks are generated
+ by the SCU resources and clock controls. Thus even if the clock is
+ enabled by these control bits, it might still not be running based
+ on the base resource.
+
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See the full list of clock IDs from:
+ include/dt-bindings/clock/imx8-clock.h
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qxp-lpcg-adma
+ - fsl,imx8qxp-lpcg-conn
+ - fsl,imx8qxp-lpcg-dc
+ - fsl,imx8qxp-lpcg-dsp
+ - fsl,imx8qxp-lpcg-gpu
+ - fsl,imx8qxp-lpcg-hsio
+ - fsl,imx8qxp-lpcg-img
+ - fsl,imx8qxp-lpcg-lsio
+ - fsl,imx8qxp-lpcg-vpu
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@5b200000 {
+ compatible = "fsl,imx8qxp-lpcg-conn";
+ reg = <0x5b200000 0xb0000>;
+ #clock-cells = <1>;
+ };
+
+ mmc@5b010000 {
+ compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x5b010000 0x10000>;
+ clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
+ clock-names = "ipg", "per", "ahb";
+ power-domains = <&pd IMX_SC_R_SDHC_0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
deleted file mode 100644
index 75598e655067..000000000000
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Ingenic SoC CGU binding
-
-The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
-typically includes a variety of PLLs, multiplexers, dividers & gates in order
-to provide many different clock signals derived from only 2 external source
-clocks.
-
-Required properties:
-- compatible : Should be one of:
- * ingenic,jz4740-cgu
- * ingenic,jz4725b-cgu
- * ingenic,jz4770-cgu
- * ingenic,jz4780-cgu
- * ingenic,x1000-cgu
-- reg : The address & length of the CGU registers.
-- clocks : List of phandle & clock specifiers for clocks external to the CGU.
- Two such external clocks should be specified - first the external crystal
- "ext" and second the RTC clock source "rtc".
-- clock-names : List of name strings for the external clocks.
-- #clock-cells: Should be 1.
- Clock consumers specify this argument to identify a clock. The valid values
- may be found in <dt-bindings/clock/<soctype>-cgu.h>.
-
-Example SoC include file:
-
-/ {
- cgu: jz4740-cgu {
- compatible = "ingenic,jz4740-cgu";
- reg = <0x10000000 0x100>;
- #clock-cells = <1>;
- };
-
- uart0: serial@10030000 {
- clocks = <&cgu JZ4740_CLK_UART0>;
- };
-};
-
-Example board file:
-
-/ {
- ext: clock@0 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <12000000>;
- };
-
- rtc: clock@1 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
-
- &cgu {
- clocks = <&ext> <&rtc>;
- clock-names: "ext", "rtc";
- };
-};
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
new file mode 100644
index 000000000000..a952d5811823
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs CGU devicetree bindings
+
+description: |
+ The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
+ typically includes a variety of PLLs, multiplexers, dividers & gates in order
+ to provide many different clock signals derived from only 2 external source
+ clocks.
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ingenic,jz4740-cgu
+ - ingenic,jz4725b-cgu
+ - ingenic,jz4770-cgu
+ - ingenic,jz4780-cgu
+ - ingenic,x1000-cgu
+ - ingenic,x1830-cgu
+ required:
+ - compatible
+
+properties:
+ $nodename:
+ pattern: "^clock-controller@[0-9a-f]+$"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ "#clock-cells":
+ const: 1
+
+ ranges: true
+
+ compatible:
+ items:
+ - enum:
+ - ingenic,jz4740-cgu
+ - ingenic,jz4725b-cgu
+ - ingenic,jz4770-cgu
+ - ingenic,jz4780-cgu
+ - ingenic,x1000-cgu
+ - ingenic,x1830-cgu
+ - const: simple-mfd
+ minItems: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: External oscillator clock
+ - description: Internal 32 kHz RTC clock
+
+ clock-names:
+ items:
+ - const: ext
+ - enum:
+ - rtc
+ - osc32k # Different name, same clock
+
+ assigned-clocks:
+ minItems: 1
+ maxItems: 64
+
+ assigned-clock-parents:
+ minItems: 1
+ maxItems: 64
+
+ assigned-clock-rates:
+ minItems: 1
+ maxItems: 64
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+patternProperties:
+ "^usb-phy@[a-f0-9]+$":
+ allOf: [ $ref: "../usb/ingenic,jz4770-phy.yaml#" ]
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4770-cgu.h>
+ cgu: clock-controller@10000000 {
+ compatible = "ingenic,jz4770-cgu", "simple-mfd";
+ reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
+
+ clocks = <&ext>, <&osc32k>;
+ clock-names = "ext", "osc32k";
+
+ #clock-cells = <1>;
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4770-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+ vcc-supply = <&ldo5>;
+
+ #phy-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index a345320e0e49..a404c8fbee67 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -65,7 +65,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@100000 {
compatible = "qcom,gcc-sc7180";
- reg = <0 0x00100000 0 0x1f0000>;
+ reg = <0x00100000 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
index 36f3b3668ced..12766a866625 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -63,7 +63,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@100000 {
compatible = "qcom,gcc-sm8150";
- reg = <0 0x00100000 0 0x1f0000>;
+ reg = <0x00100000 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&sleep_clk>;
clock-names = "bi_tcxo", "sleep_clk";
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
index 2c40a8aa9815..a5766ff89082 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -61,7 +61,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@100000 {
compatible = "qcom,gcc-sm8250";
- reg = <0 0x00100000 0 0x1f0000>;
+ reg = <0x00100000 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&sleep_clk>;
clock-names = "bi_tcxo", "sleep_clk";
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index f684fe67db84..acc31b3991bd 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -15,15 +15,15 @@ description: |
power domains.
properties:
- compatible :
+ compatible:
enum:
- - qcom,mmcc-apq8064
- - qcom,mmcc-apq8084
- - qcom,mmcc-msm8660
- - qcom,mmcc-msm8960
- - qcom,mmcc-msm8974
- - qcom,mmcc-msm8996
- - qcom,mmcc-msm8998
+ - qcom,mmcc-apq8064
+ - qcom,mmcc-apq8084
+ - qcom,mmcc-msm8660
+ - qcom,mmcc-msm8960
+ - qcom,mmcc-msm8974
+ - qcom,mmcc-msm8996
+ - qcom,mmcc-msm8998
clocks:
items:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
index 58cdfd5924d3..e94847f92770 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
@@ -66,7 +66,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@af00000 {
compatible = "qcom,sc7180-dispcc";
- reg = <0 0x0af00000 0 0x200000>;
+ reg = <0x0af00000 0x200000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&dsi_phy 0>,
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
index 8635e35fd3f0..fe08461fce05 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
@@ -60,7 +60,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@5090000 {
compatible = "qcom,sc7180-gpucc";
- reg = <0 0x05090000 0 0x9000>;
+ reg = <0x05090000 0x9000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
index 0dd5d25ae7d7..970030986a86 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
@@ -50,7 +50,7 @@ examples:
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
clock-controller@41a8000 {
compatible = "qcom,sc7180-mss";
- reg = <0 0x041a8000 0 0x8000>;
+ reg = <0x041a8000 0x8000>;
clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
<&gcc GCC_MSS_NAV_AXI_CLK>,
<&gcc GCC_MSS_CFG_AHB_CLK>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
index 0071b9701960..2feea2b91aa9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
@@ -55,7 +55,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@ab00000 {
compatible = "qcom,sc7180-videocc";
- reg = <0 0x0ab00000 0 0x10000>;
+ reg = <0x0ab00000 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "bi_tcxo";
#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index ad47d747a3e4..4a3be733d042 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -75,7 +75,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@af00000 {
compatible = "qcom,sdm845-dispcc";
- reg = <0 0x0af00000 0 0x10000>;
+ reg = <0x0af00000 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
index 7a052ac5dc00..8a0c576ba8b3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
@@ -60,7 +60,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@5090000 {
compatible = "qcom,sdm845-gpucc";
- reg = <0 0x05090000 0 0x9000>;
+ reg = <0x05090000 0x9000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
index 2a6a81ab0318..f7a0cf53d5f0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
@@ -55,7 +55,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@ab00000 {
compatible = "qcom,sdm845-videocc";
- reg = <0 0x0ab00000 0 0x10000>;
+ reg = <0x0ab00000 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "bi_tcxo";
#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
index bb3a78d8105e..14ae4ea3bc20 100644
--- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -76,29 +76,24 @@ examples:
- |
ap_clk: clock-controller@21500000 {
compatible = "sprd,sc9863a-ap-clk";
- reg = <0 0x21500000 0 0x1000>;
+ reg = <0x21500000 0x1000>;
clocks = <&ext_26m>, <&ext_32k>;
clock-names = "ext-26m", "ext-32k";
#clock-cells = <1>;
};
- |
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- ap_ahb_regs: syscon@20e00000 {
- compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
- reg = <0 0x20e00000 0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0x20e00000 0x4000>;
-
- apahb_gate: apahb-gate@0 {
- compatible = "sprd,sc9863a-apahb-gate";
- reg = <0x0 0x1020>;
- #clock-cells = <1>;
- };
+ syscon@20e00000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
+ reg = <0x20e00000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x20e00000 0x4000>;
+
+ apahb_gate: apahb-gate@0 {
+ compatible = "sprd,sc9863a-apahb-gate";
+ reg = <0x0 0x1020>;
+ #clock-cells = <1>;
};
};
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 4638d7adb806..9bd52e63c935 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -15,10 +15,15 @@ description:
properties:
compatible:
- enum:
- - usb-a-connector
- - usb-b-connector
- - usb-c-connector
+ oneOf:
+ - enum:
+ - usb-a-connector
+ - usb-b-connector
+ - usb-c-connector
+
+ - items:
+ - const: gpio-usb-b-connector
+ - const: usb-b-connector
label:
description: Symbolic name for the connector.
@@ -27,8 +32,8 @@ properties:
description: Size of the connector, should be specified in case of
non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
connectors.
- allOf:
- - $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#definitions/string
+
enum:
- mini
- micro
@@ -57,8 +62,8 @@ properties:
power-role:
description: Determines the power role that the Type C connector will
support. "dual" refers to Dual Role Port (DRP).
- allOf:
- - $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#definitions/string
+
enum:
- source
- sink
@@ -66,18 +71,18 @@ properties:
try-power-role:
description: Preferred power role.
- allOf:
- - $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#definitions/string
+
enum:
- - source
- - sink
- - dual
+ - source
+ - sink
+ - dual
data-role:
description: Data role if Type C connector supports USB data. "dual" refers
Dual Role Device (DRD).
- allOf:
- - $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#definitions/string
+
enum:
- host
- device
@@ -95,8 +100,7 @@ properties:
defined in dt-bindings/usb/pd.h.
minItems: 1
maxItems: 7
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
sink-pdos:
description: An array of u32 with each entry providing supported power sink
@@ -108,8 +112,7 @@ properties:
in dt-bindings/usb/pd.h.
minItems: 1
maxItems: 7
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
op-sink-microwatt:
description: Sink required operating power in microwatt, if source can't
@@ -142,9 +145,22 @@ properties:
required:
- compatible
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: gpio-usb-b-connector
+ then:
+ anyOf:
+ - required:
+ - vbus-gpios
+ - required:
+ - id-gpios
+
examples:
# Micro-USB connector with HS lines routed via controller (MUIC).
- - |+
+ - |
muic-max77843 {
usb_con1: connector {
compatible = "usb-b-connector";
@@ -156,7 +172,7 @@ examples:
# USB-C connector attached to CC controller (s2mm005), HS lines routed
# to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
# DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
- - |+
+ - |
ccic: s2mm005 {
usb_con2: connector {
compatible = "usb-c-connector";
@@ -190,7 +206,7 @@ examples:
# USB-C connector attached to a typec port controller(ptn5110), which has
# power delivery support and enables drp.
- - |+
+ - |
#include <dt-bindings/usb/pd.h>
typec: ptn5110 {
usb_con3: connector {
@@ -204,3 +220,16 @@ examples:
op-sink-microwatt = <10000000>;
};
};
+
+ # USB connector with GPIO control lines
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ usb {
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ type = "micro";
+ id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_p0_vbus>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index 8b9a8f337f16..fc823572bcff 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -15,16 +15,16 @@ properties:
oneOf:
- const: allwinner,sun4i-a10-crypto
- items:
- - const: allwinner,sun5i-a13-crypto
- - const: allwinner,sun4i-a10-crypto
+ - const: allwinner,sun5i-a13-crypto
+ - const: allwinner,sun4i-a10-crypto
- items:
- - const: allwinner,sun6i-a31-crypto
- - const: allwinner,sun4i-a10-crypto
+ - const: allwinner,sun6i-a31-crypto
+ - const: allwinner,sun4i-a10-crypto
- items:
- - const: allwinner,sun7i-a20-crypto
- - const: allwinner,sun4i-a10-crypto
+ - const: allwinner,sun7i-a20-crypto
+ - const: allwinner,sun4i-a10-crypto
- items:
- - const: allwinner,sun8i-a33-crypto
+ - const: allwinner,sun8i-a33-crypto
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
index 2c459b8c76ff..7a60d84289cc 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
@@ -50,16 +50,16 @@ if:
const: allwinner,sun50i-h6-crypto
then:
properties:
- clocks:
- minItems: 3
- clock-names:
- minItems: 3
+ clocks:
+ minItems: 3
+ clock-names:
+ minItems: 3
else:
properties:
- clocks:
- maxItems: 2
- clock-names:
- maxItems: 2
+ clocks:
+ maxItems: 2
+ clock-names:
+ maxItems: 2
required:
- compatible
diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
index 5becc60a0e28..ecf98a9e72b2 100644
--- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
@@ -12,7 +12,7 @@ maintainers:
properties:
compatible:
items:
- - const: amlogic,gxl-crypto
+ - const: amlogic,gxl-crypto
reg:
maxItems: 1
@@ -45,7 +45,7 @@ examples:
crypto: crypto-engine@c883e000 {
compatible = "amlogic,gxl-crypto";
- reg = <0x0 0xc883e000 0x0 0x36>;
+ reg = <0xc883e000 0x36>;
interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_BLKMV>;
clock-names = "blkmv";
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index 57ae1c0b6d18..6dd658f0912c 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -36,11 +36,10 @@ properties:
dma-maxburst:
description: Set number of maximum dma burst supported
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 2
- - default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 2
+ default: 0
required:
- compatible
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
index 944ff2f1cf93..e77523b02fad 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -66,10 +66,9 @@ properties:
- allwinner,sun50i-h6-display-engine
allwinner,pipelines:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle-array
- - minItems: 1
- maxItems: 2
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 2
description: |
Available display engine frontends (DE 1.0) or mixers (DE
2.0/3.0) available.
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
index 5d4915aed1e2..75e6479397a5 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -21,8 +21,8 @@ properties:
- const: allwinner,sun5i-a10s-hdmi
- const: allwinner,sun6i-a31-hdmi
- items:
- - const: allwinner,sun7i-a20-hdmi
- - const: allwinner,sun5i-a10s-hdmi
+ - const: allwinner,sun7i-a20-hdmi
+ - const: allwinner,sun5i-a10s-hdmi
reg:
maxItems: 1
@@ -33,32 +33,32 @@ properties:
clocks:
oneOf:
- items:
- - description: The HDMI interface clock
- - description: The HDMI module clock
- - description: The first video PLL
- - description: The second video PLL
+ - description: The HDMI interface clock
+ - description: The HDMI module clock
+ - description: The first video PLL
+ - description: The second video PLL
- items:
- - description: The HDMI interface clock
- - description: The HDMI module clock
- - description: The HDMI DDC clock
- - description: The first video PLL
- - description: The second video PLL
+ - description: The HDMI interface clock
+ - description: The HDMI module clock
+ - description: The HDMI DDC clock
+ - description: The first video PLL
+ - description: The second video PLL
clock-names:
oneOf:
- items:
- - const: ahb
- - const: mod
- - const: pll-0
- - const: pll-1
+ - const: ahb
+ - const: mod
+ - const: pll-0
+ - const: pll-1
- items:
- - const: ahb
- - const: mod
- - const: ddc
- - const: pll-0
- - const: pll-1
+ - const: ahb
+ - const: mod
+ - const: ddc
+ - const: pll-0
+ - const: pll-1
resets:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
index e5344c4ae226..4c15a2644a7c 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -35,26 +35,26 @@ properties:
- const: allwinner,sun9i-a80-tcon-tv
- items:
- - enum:
- - allwinner,sun7i-a20-tcon0
- - allwinner,sun7i-a20-tcon1
- - const: allwinner,sun7i-a20-tcon
+ - enum:
+ - allwinner,sun7i-a20-tcon0
+ - allwinner,sun7i-a20-tcon1
+ - const: allwinner,sun7i-a20-tcon
- items:
- - enum:
- - allwinner,sun50i-a64-tcon-lcd
- - const: allwinner,sun8i-a83t-tcon-lcd
+ - enum:
+ - allwinner,sun50i-a64-tcon-lcd
+ - const: allwinner,sun8i-a83t-tcon-lcd
- items:
- - enum:
- - allwinner,sun8i-h3-tcon-tv
- - allwinner,sun50i-a64-tcon-tv
- - const: allwinner,sun8i-a83t-tcon-tv
+ - enum:
+ - allwinner,sun8i-h3-tcon-tv
+ - allwinner,sun50i-a64-tcon-tv
+ - const: allwinner,sun8i-a83t-tcon-tv
- items:
- - enum:
- - allwinner,sun50i-h6-tcon-tv
- - const: allwinner,sun8i-r40-tcon-tv
+ - enum:
+ - allwinner,sun50i-h6-tcon-tv
+ - const: allwinner,sun8i-r40-tcon-tv
reg:
maxItems: 1
@@ -71,11 +71,10 @@ properties:
maxItems: 4
clock-output-names:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string-array
- - maxItems: 1
description:
Name of the LCD pixel clock created.
+ $ref: /schemas/types.yaml#/definitions/string-array
+ maxItems: 1
dmas:
maxItems: 1
@@ -83,37 +82,37 @@ properties:
resets:
anyOf:
- items:
- - description: TCON Reset Line
+ - description: TCON Reset Line
- items:
- - description: TCON Reset Line
- - description: TCON LVDS Reset Line
+ - description: TCON Reset Line
+ - description: TCON LVDS Reset Line
- items:
- - description: TCON Reset Line
- - description: TCON eDP Reset Line
+ - description: TCON Reset Line
+ - description: TCON eDP Reset Line
- items:
- - description: TCON Reset Line
- - description: TCON eDP Reset Line
- - description: TCON LVDS Reset Line
+ - description: TCON Reset Line
+ - description: TCON eDP Reset Line
+ - description: TCON LVDS Reset Line
reset-names:
oneOf:
- const: lcd
- items:
- - const: lcd
- - const: lvds
+ - const: lcd
+ - const: lvds
- items:
- - const: lcd
- - const: edp
+ - const: lcd
+ - const: edp
- items:
- - const: lcd
- - const: edp
- - const: lvds
+ - const: lcd
+ - const: edp
+ - const: lvds
ports:
type: object
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index e73662c8d339..63f948175239 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -76,28 +76,28 @@ required:
allOf:
- if:
properties:
- compatible:
- contains:
- const: allwinner,sun6i-a31-mipi-dsi
+ compatible:
+ contains:
+ const: allwinner,sun6i-a31-mipi-dsi
then:
- properties:
- clocks:
- minItems: 2
+ properties:
+ clocks:
+ minItems: 2
- required:
- - clock-names
+ required:
+ - clock-names
- if:
properties:
- compatible:
- contains:
- const: allwinner,sun50i-a64-mipi-dsi
+ compatible:
+ contains:
+ const: allwinner,sun50i-a64-mipi-dsi
then:
- properties:
- clocks:
- minItems: 1
+ properties:
+ clocks:
+ minItems: 1
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 4d6795690ac3..fa4769a0b26e 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -29,11 +29,11 @@ properties:
- const: allwinner,sun50i-h6-dw-hdmi
- items:
- - enum:
- - allwinner,sun8i-h3-dw-hdmi
- - allwinner,sun8i-r40-dw-hdmi
- - allwinner,sun50i-a64-dw-hdmi
- - const: allwinner,sun8i-a83t-dw-hdmi
+ - enum:
+ - allwinner,sun8i-h3-dw-hdmi
+ - allwinner,sun8i-r40-dw-hdmi
+ - allwinner,sun50i-a64-dw-hdmi
+ - const: allwinner,sun8i-a83t-dw-hdmi
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
new file mode 100644
index 000000000000..3ba477aefdd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
+
+maintainers:
+ - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+properties:
+ compatible:
+ enum:
+ - analogix,anx7808
+ - analogix,anx7812
+ - analogix,anx7814
+ - analogix,anx7818
+
+ reg:
+ maxItems: 1
+ description: I2C address of the device.
+
+ interrupts:
+ maxItems: 1
+ description: Should contain the INTP interrupt.
+
+ hpd-gpios:
+ deprecated: true
+ maxItems: 1
+ description: Which GPIO to use for hpd.
+
+ pd-gpios:
+ maxItems: 1
+ description: Which GPIO to use for power down.
+
+ reset-gpios:
+ maxItems: 1
+ description: Which GPIO to use for reset.
+
+ dvdd10-supply:
+ description: Regulator for 1.0V digital core power.
+
+ ports:
+ type: object
+ description:
+ A node containing input and output port nodes with endpoint
+ definitions as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ Documentation/devicetree/bindings/graph.txt
+
+ properties:
+ port@0:
+ type: object
+ description: Video port for HDMI input.
+
+ properties:
+ reg:
+ const: 0
+
+ port@1:
+ type: object
+ description:
+ Video port for SlimPort, DisplayPort, eDP or MyDP output.
+
+ properties:
+ reg:
+ const: 1
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx7814: bridge@38 {
+ compatible = "analogix,anx7814";
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
+ pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ anx7814_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ anx7814_out: endpoint {
+ remote-endpoint = <&edp_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
deleted file mode 100644
index 17258747fff6..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Analogix ANX7814 SlimPort (Full-HD Transmitter)
------------------------------------------------
-
-The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
-designed for portable devices.
-
-Required properties:
-
- - compatible : Must be one of:
- "analogix,anx7808"
- "analogix,anx7812"
- "analogix,anx7814"
- "analogix,anx7818"
- - reg : I2C address of the device
- - interrupts : Should contain the INTP interrupt
- - hpd-gpios : Which GPIO to use for hpd
- - pd-gpios : Which GPIO to use for power down
- - reset-gpios : Which GPIO to use for reset
-
-Optional properties:
-
- - dvdd10-supply : Regulator for 1.0V digital core power.
- - Video port for HDMI input, using the DT bindings defined in [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
- anx7814: anx7814@38 {
- compatible = "analogix,anx7814";
- reg = <0x38>;
- interrupt-parent = <&gpio0>;
- interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
- hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
- pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
- port {
- anx7814_in: endpoint {
- remote-endpoint = <&hdmi0_out>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 800c63764e71..68951d56ebba 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -32,17 +32,17 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer
- - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer
- - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
- - const: lvds-encoder # Generic LVDS encoder compatible fallback
+ - enum:
+ - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer
+ - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer
+ - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
+ - const: lvds-encoder # Generic LVDS encoder compatible fallback
- items:
- - enum:
- - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
- - const: lvds-decoder # Generic LVDS decoders compatible fallback
+ - enum:
+ - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+ - const: lvds-decoder # Generic LVDS decoders compatible fallback
- enum:
- - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
+ - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
ports:
type: object
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index a747b755ad06..45fe8fe5faba 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -48,9 +48,8 @@ properties:
rotation:
description:
Display rotation in degrees counter clockwise (0,90,180,270)
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 90, 180, 270 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 90, 180, 270]
# Display Timings
panel-timing:
@@ -58,16 +57,14 @@ properties:
Most display panels are restricted to a single resolution and
require specific display timings. The panel-timing subnode expresses those
timings.
- allOf:
- - $ref: panel-timing.yaml#
+ $ref: panel-timing.yaml#
display-timings:
description:
Some display panels support several resolutions with different timings.
The display-timings bindings supports specifying several timings and
optionally specifying which is the native mode.
- allOf:
- - $ref: display-timings.yaml#
+ $ref: display-timings.yaml#
# Connectivity
port:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
index bd558ad7891f..182c19cb7fdd 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -72,92 +72,80 @@ properties:
hfront-porch:
description: Horizontal front porch panel timing
oneOf:
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maxItems: 1
- items:
- description: typical number of pixels
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 3
- maxItems: 3
- items:
- description: min, typ, max number of pixels
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ items:
+ description: typical number of pixels
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of pixels
hback-porch:
description: Horizontal back porch timing
oneOf:
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maxItems: 1
- items:
- description: typical number of pixels
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 3
- maxItems: 3
- items:
- description: min, typ, max number of pixels
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ items:
+ description: typical number of pixels
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of pixels
hsync-len:
description: Horizontal sync length panel timing
oneOf:
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maxItems: 1
- items:
- description: typical number of pixels
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 3
- maxItems: 3
- items:
- description: min, typ, max number of pixels
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ items:
+ description: typical number of pixels
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of pixels
vfront-porch:
description: Vertical front porch panel timing
oneOf:
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maxItems: 1
- items:
- description: typical number of lines
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 3
- maxItems: 3
- items:
- description: min, typ, max number of lines
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ items:
+ description: typical number of lines
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of lines
vback-porch:
description: Vertical back porch panel timing
oneOf:
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maxItems: 1
- items:
- description: typical number of lines
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 3
- maxItems: 3
- items:
- description: min, typ, max number of lines
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ items:
+ description: typical number of lines
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of lines
vsync-len:
description: Vertical sync length panel timing
oneOf:
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maxItems: 1
- items:
- description: typical number of lines
- - allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 3
- maxItems: 3
- items:
- description: min, typ, max number of lines
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+ items:
+ description: typical number of lines
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of lines
hsync-active:
description: |
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
index 185dcc8fd1f9..78d060097052 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -18,7 +18,7 @@ properties:
reg: true
reset-gpios: true
vddi-supply:
- description: regulator that supplies the vddi voltage
+ description: regulator that supplies the vddi voltage
enforce-video-mode: true
required:
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index 6913923df569..d5c46a3cc2b0 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -19,9 +19,9 @@ properties:
backlight: true
reset-gpios: true
iovcc-supply:
- description: regulator that supplies the iovcc voltage
+ description: regulator that supplies the iovcc voltage
vci-supply:
- description: regulator that supplies the vci voltage
+ description: regulator that supplies the vci voltage
required:
- compatible
diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
index a57037b9e9ba..561efaaa5a91 100644
--- a/Documentation/devicetree/bindings/display/renesas,cmm.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
@@ -21,15 +21,15 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - renesas,r8a7795-cmm
- - renesas,r8a7796-cmm
- - renesas,r8a77965-cmm
- - renesas,r8a77990-cmm
- - renesas,r8a77995-cmm
- - const: renesas,rcar-gen3-cmm
+ - enum:
+ - renesas,r8a7795-cmm
+ - renesas,r8a7796-cmm
+ - renesas,r8a77965-cmm
+ - renesas,r8a77990-cmm
+ - renesas,r8a77995-cmm
+ - const: renesas,rcar-gen3-cmm
- items:
- - const: renesas,rcar-gen2-cmm
+ - const: renesas,rcar-gen2-cmm
reg:
maxItems: 1
@@ -60,7 +60,7 @@ examples:
cmm0: cmm@fea40000 {
compatible = "renesas,r8a7796-cmm",
"renesas,rcar-gen3-cmm";
- reg = <0 0xfea40000 0 0x1000>;
+ reg = <0xfea40000 0x1000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
clocks = <&cpg CPG_MOD 711>;
resets = <&cpg 711>;
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index eb04c2330698..4f9185462ed3 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -88,9 +88,8 @@ properties:
- "#size-cells"
ti,am65x-oldi-io-ctrl:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
- - maxItems: 1
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ maxItems: 1
description:
phandle to syscon device node mapping OLDI IO_CTRL registers.
The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
@@ -123,13 +122,13 @@ examples:
dss: dss@4a00000 {
compatible = "ti,am65x-dss";
- reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
- <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
- <0x0 0x04a06000 0x0 0x1000>, /* vid */
- <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
- <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
- <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
- <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+ reg = <0x04a00000 0x1000>, /* common */
+ <0x04a02000 0x1000>, /* vidl1 */
+ <0x04a06000 0x1000>, /* vid */
+ <0x04a07000 0x1000>, /* ovr1 */
+ <0x04a08000 0x1000>, /* ovr2 */
+ <0x04a0a000 0x1000>, /* vp1 */
+ <0x04a0b000 0x1000>; /* vp2 */
reg-names = "common", "vidl1", "vid",
"ovr1", "ovr2", "vp1", "vp2";
ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
index eb4b1a266210..bbd76591c180 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -156,23 +156,23 @@ examples:
dss: dss@4a00000 {
compatible = "ti,j721e-dss";
- reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
- <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
- <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
- <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
- <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
- <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
- <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
- <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
- <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
- <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
- <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
- <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
- <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
- <0x00 0x04aa0000 0x00 0x10000>, /* vp2 */
- <0x00 0x04ac0000 0x00 0x10000>, /* vp3 */
- <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
- <0x00 0x04af0000 0x00 0x10000>; /* wb */
+ reg = <0x04a00000 0x10000>, /* common_m */
+ <0x04a10000 0x10000>, /* common_s0*/
+ <0x04b00000 0x10000>, /* common_s1*/
+ <0x04b10000 0x10000>, /* common_s2*/
+ <0x04a20000 0x10000>, /* vidl1 */
+ <0x04a30000 0x10000>, /* vidl2 */
+ <0x04a50000 0x10000>, /* vid1 */
+ <0x04a60000 0x10000>, /* vid2 */
+ <0x04a70000 0x10000>, /* ovr1 */
+ <0x04a90000 0x10000>, /* ovr2 */
+ <0x04ab0000 0x10000>, /* ovr3 */
+ <0x04ad0000 0x10000>, /* ovr4 */
+ <0x04a80000 0x10000>, /* vp1 */
+ <0x04aa0000 0x10000>, /* vp2 */
+ <0x04ac0000 0x10000>, /* vp3 */
+ <0x04ae0000 0x10000>, /* vp4 */
+ <0x04af0000 0x10000>; /* wb */
reg-names = "common_m", "common_s0",
"common_s1", "common_s2",
"vidl1", "vidl2","vid1","vid2",
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
index 02a34ba2b49b..c36592683340 100644
--- a/Documentation/devicetree/bindings/dma/dma-common.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -31,8 +31,7 @@ properties:
kernel. i.e. first channel corresponds to LSB.
The first item in the array is for channels 0-31, the second is for
channels 32-63, etc.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
items:
minItems: 1
# Should be enough
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
new file mode 100644
index 000000000000..92794c500589
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs DMA Controller DT bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - ingenic,jz4740-dma
+ - ingenic,jz4725b-dma
+ - ingenic,jz4770-dma
+ - ingenic,jz4780-dma
+ - ingenic,x1000-dma
+ - ingenic,x1830-dma
+
+ reg:
+ items:
+ - description: Channel-specific registers
+ - description: System control registers
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#dma-cells":
+ const: 2
+ description: >
+ DMA clients must use the format described in dma.txt, giving a phandle
+ to the DMA controller plus the following 2 integer cells:
+
+ - Request type: The DMA request type for transfers to/from the
+ device on the allocated channel, as defined in the SoC documentation.
+
+ - Channel: If set to 0xffffffff, any available channel will be allocated
+ for the client. Otherwise, the exact channel specified will be used.
+ The channel should be reserved on the DMA controller using the
+ ingenic,reserved-channels property.
+
+ ingenic,reserved-channels:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: >
+ Bitmask of channels to reserve for devices that need a specific
+ channel. These channels will only be assigned when explicitely
+ requested by a client. The primary use for this is channels 0 and
+ 1, which can be configured to have special behaviour for NAND/BCH
+ when using programmable firmware.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ dma: dma-controller@13420000 {
+ compatible = "ingenic,jz4780-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu JZ4780_CLK_PDMA>;
+
+ #dma-cells = <2>;
+
+ ingenic,reserved-channels = <0x3>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
deleted file mode 100644
index 3459e77be294..000000000000
--- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Ingenic XBurst DMA Controller
-
-Required properties:
-
-- compatible: Should be one of:
- * ingenic,jz4740-dma
- * ingenic,jz4725b-dma
- * ingenic,jz4770-dma
- * ingenic,jz4780-dma
- * ingenic,x1000-dma
- * ingenic,x1830-dma
-- reg: Should contain the DMA channel registers location and length, followed
- by the DMA controller registers location and length.
-- interrupts: Should contain the interrupt specifier of the DMA controller.
-- clocks: Should contain a clock specifier for the JZ4780/X1000/X1830 PDMA
- clock.
-- #dma-cells: Must be <2>. Number of integer cells in the dmas property of
- DMA clients (see below).
-
-Optional properties:
-
-- ingenic,reserved-channels: Bitmask of channels to reserve for devices that
- need a specific channel. These channels will only be assigned when explicitly
- requested by a client. The primary use for this is channels 0 and 1, which
- can be configured to have special behaviour for NAND/BCH when using
- programmable firmware.
-
-Example:
-
-dma: dma-controller@13420000 {
- compatible = "ingenic,jz4780-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
-
- interrupt-parent = <&intc>;
- interrupts = <10>;
-
- clocks = <&cgu JZ4780_CLK_PDMA>;
-
- #dma-cells = <2>;
-
- ingenic,reserved-channels = <0x3>;
-};
-
-DMA clients must use the format described in dma.txt, giving a phandle to the
-DMA controller plus the following 2 integer cells:
-
-1. Request type: The DMA request type for transfers to/from the device on
- the allocated channel, as defined in the SoC documentation.
-
-2. Channel: If set to 0xffffffff, any available channel will be allocated for
- the client. Otherwise, the exact channel specified will be used. The channel
- should be reserved on the DMA controller using the ingenic,reserved-channels
- property.
-
-Example:
-
-uart0: serial@10030000 {
- ...
- dmas = <&dma 0x14 0xffffffff
- &dma 0x15 0xffffffff>;
- dma-names = "tx", "rx";
- ...
-};
diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
index 5d6f98c43e3d..2117db0ce4f2 100644
--- a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
+++ b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
@@ -21,7 +21,8 @@ Required properties:
Examples:
apdma: dma-controller@11000400 {
- compatible = "mediatek,mt2712-uart-dma";
+ compatible = "mediatek,mt2712-uart-dma",
+ "mediatek,mt6577-uart-dma";
reg = <0 0x11000400 0 0x80>,
<0 0x11000480 0 0x80>,
<0 0x11000500 0 0x80>,
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index e7f2ad7dab5e..d32a71b975fe 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -49,7 +49,7 @@ examples:
- |
dma@3000000 {
compatible = "sifive,fu540-c000-pdma";
- reg = <0x0 0x3000000 0x0 0x8000>;
+ reg = <0x3000000 0x8000>;
interrupts = <23 24 25 26 27 28 29 30>;
#dma-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index 39ea05e6e5ff..dd70ddab4fd1 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -69,34 +69,30 @@ properties:
maxItems: 3
reg-names:
- items:
- - const: gcfg
- - const: rchanrt
- - const: tchanrt
+ items:
+ - const: gcfg
+ - const: rchanrt
+ - const: tchanrt
msi-parent: true
ti,sci:
description: phandle to TI-SCI compatible System controller node
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
ti,sci-dev-id:
description: TI-SCI device id of UDMAP
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
ti,ringacc:
description: phandle to the ring accelerator node
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
ti,sci-rm-range-tchan:
description: |
Array of UDMA tchan resource subtypes for resource allocation for this
host
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
# Should be enough
maxItems: 255
@@ -105,8 +101,7 @@ properties:
description: |
Array of UDMA rchan resource subtypes for resource allocation for this
host
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
# Should be enough
maxItems: 255
@@ -115,8 +110,7 @@ properties:
description: |
Array of UDMA rflow resource subtypes for resource allocation for this
host
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
# Should be enough
maxItems: 255
@@ -142,8 +136,7 @@ then:
properties:
ti,udma-atype:
description: ATYPE value which should be used by non slave channels
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
required:
- ti,udma-atype
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index a15787e504f0..4cee72d53318 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -34,7 +34,7 @@ properties:
- minItems: 1
maxItems: 2
items:
- - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|mac)[0-9]+|spd)$"
+ - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$"
- pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
- oneOf:
- items:
@@ -118,14 +118,13 @@ properties:
maxItems: 1
pagesize:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description:
The length of the pagesize for writing. Please consult the
manual of your device, that value varies a lot. A wrong value
may result in data loss! If not specified, a safety value of
'1' is used which will be very slow.
- enum: [ 1, 8, 16, 32, 64, 128, 258 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 8, 16, 32, 64, 128, 256]
default: 1
read-only:
@@ -148,18 +147,16 @@ properties:
wp-gpios: true
address-width:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description:
Number of address bits.
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 8
enum: [ 8, 16 ]
num-addresses:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description:
Total number of i2c slave addresses this device takes.
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 1
minimum: 1
maximum: 8
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index 62811a1b5058..c9534d2164a2 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -138,12 +138,8 @@ properties:
# 'description'.
vendor,int-property:
description: Vendor specific properties must have a description
- # 'allOf' is the json-schema way of subclassing a schema. Here the base
- # type schema is referenced and then additional constraints on the values
- # are added.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [2, 4, 6, 8, 10]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2, 4, 6, 8, 10]
vendor,bool-property:
description: Vendor specific properties must have a description. Boolean
@@ -154,11 +150,10 @@ properties:
vendor,string-array-property:
description: Vendor specific properties should reference a type in the
core schema.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string-array
- - items:
- - enum: [ foo, bar ]
- - enum: [ baz, boo ]
+ $ref: /schemas/types.yaml#/definitions/string-array
+ items:
+ - enum: [foo, bar]
+ - enum: [baz, boo]
vendor,property-in-standard-units-microvolt:
description: Vendor specific properties having a standard unit suffix
diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
deleted file mode 100644
index 208daaff0be4..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-Cirrus Logic Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-This document lists Extcon specific bindings, see the primary binding document:
- ../mfd/arizona.txt
-
-Optional properties:
-
- - wlf,hpdet-channel : Headphone detection channel.
- ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
- ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
- If this node is not mentioned or if the value is unknown, then
- headphone detection mode is set to HPDETL.
-
- - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack
- detection.
- - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for
- jack detection.
- - wlf,jd-invert : Invert the polarity of the jack detection switch
-
- - wlf,micd-software-compare : Use a software comparison to determine mic
- presence
- - wlf,micd-detect-debounce : Additional software microphone detection
- debounce specified in milliseconds.
- - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset
- polarity if one exists.
- - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to
- performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX
- defines.
- - wlf,micd-rate : Delay between successive microphone detection measurements,
- specified as per the ARIZONA_MICD_TIME_XXX defines.
- - wlf,micd-dbtime : Microphone detection hardware debounces specified as the
- number of measurements to take, valid values being 2 and 4.
- - wlf,micd-timeout-ms : Timeout for microphone detection, specified in
- milliseconds.
- - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone
- detection.
- - wlf,micd-configs : Headset polarity configurations (generally used for
- detection of CTIA / OMTP headsets), the field can be of variable length
- but should always be a multiple of 3 cells long, each three cell group
- represents one polarity configuration.
- The first cell defines the accessory detection pin, zero will use MICDET1
- and all other values will use MICDET2.
- The second cell represents the MICBIAS to be used.
- The third cell represents the value of the micd-pol-gpio pin.
-
- - wlf,gpsw : Settings for the general purpose switch, set as one of the
- ARIZONA_GPSW_XXX defines.
-
-Example:
-
-codec: wm8280@0 {
- compatible = "wlf,wm8280";
- reg = <0>;
- ...
-
- wlf,use-jd2;
- wlf,use-jd2-nopull;
- wlf,jd-invert;
-
- wlf,micd-software-compare;
- wlf,micd-detect-debounce = <0>;
- wlf,micd-pol-gpio = <&codec 2 0>;
- wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
- wlf,micd-dbtime = <4>;
- wlf,micd-timeout-ms = <100>;
- wlf,micd-force-micbias;
- wlf,micd-configs = <
- 0 1 0 /* MICDET1 MICBIAS1 GPIO=low */
- 1 2 1 /* MICDET2 MICBIAS2 GPIO=high */
- >;
-
- wlf,gpsw = <ARIZONA_GPSW_OPEN>;
-};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
index 9c5849b341ea..20e1ccfc8630 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -22,8 +22,7 @@ properties:
const: google,extcon-usbc-cros-ec
google,usb-port-id:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: the port id
minimum: 0
maximum: 255
diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
new file mode 100644
index 000000000000..f9845dc2f5ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ These devices are audio SoCs with extensive digital capabilities and a
+ range of analogue I/O.
+
+ This document lists Extcon specific bindings, see the primary binding
+ document ../mfd/arizona.yaml
+
+properties:
+ wlf,hpdet-channel:
+ description:
+ Headphone detection channel. ARIZONA_ACCDET_MODE_HPL/1 sets the
+ headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
+ to HPDETR. If this node is not included or if the value is unknown,
+ then headphone detection mode is set to HPDETL.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 1
+ maximum: 2
+
+ wlf,use-jd2:
+ description:
+ Use the additional JD input along with JD1 for dual pin jack detection.
+ type: boolean
+
+ wlf,use-jd2-nopull:
+ description:
+ Internal pull on JD2 is disabled when used for jack detection.
+ type: boolean
+
+ wlf,jd-invert:
+ description:
+ Invert the polarity of the jack detection switch.
+ type: boolean
+
+ wlf,micd-software-compare:
+ description:
+ Use a software comparison to determine mic presence.
+ type: boolean
+
+ wlf,micd-detect-debounce:
+ description:
+ Additional software microphone detection debounce specified in
+ milliseconds.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ wlf,micd-pol-gpio:
+ description:
+ GPIO specifier for the GPIO controlling the headset polarity if one
+ exists.
+ maxItems: 1
+
+ wlf,micd-bias-start-time:
+ description:
+ Time allowed for MICBIAS to startup prior to performing microphone
+ detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 12
+
+ wlf,micd-rate:
+ description:
+ Delay between successive microphone detection measurements, specified
+ as per the ARIZONA_MICD_TIME_XXX defines.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 12
+
+ wlf,micd-dbtime:
+ description:
+ Microphone detection hardware debounces specified as the number of
+ measurements to take.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum: [2, 4]
+
+ wlf,micd-timeout-ms:
+ description:
+ Timeout for microphone detection, specified in milliseconds.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ wlf,micd-force-micbias:
+ description:
+ Force MICBIAS continuously on during microphone detection.
+ type: boolean
+
+ wlf,micd-configs:
+ description:
+ Headset polarity configurations (generally used for detection of
+ CTIA / OMTP headsets), the field can be of variable length but
+ should always be a multiple of 3 cells long, each three cell group
+ represents one polarity configuration.
+ $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+ items:
+ items:
+ - description:
+ The first cell defines the accessory detection pin, zero
+ will use MICDET1 and 0x2000 will use MICDET2.
+ enum: [ 0, 0x2000 ]
+ - description:
+ The second cell represents the MICBIAS to be used. Zero
+ will use MICVDD, 1-3 will use MICBIASx.
+ minimum: 0
+ maximum: 3
+ - description:
+ The third cell represents the value of the micd-pol-gpio
+ pin.
+ minimum: 0
+ maximum: 1
+
+ wlf,gpsw:
+ description:
+ Settings for the general purpose switch, set as one of the
+ ARIZONA_GPSW_XXX defines.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 3
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index 5f1ed20e43ee..4f2cbd8307a7 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -27,7 +27,7 @@ properties:
gpio-controller: true
'#gpio-cells':
- const: 2
+ const: 2
ngpios:
minimum: 0
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
deleted file mode 100644
index b4cd9f906c24..000000000000
--- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Freescale i.MX/MXC GPIO controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-gpio"
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all 32 pins, if
- one number. If two numbers, the first one is the interrupt shared
- by low 16 pins and the second one is for high 16 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2. The first cell is the GPIO number.
- The second cell bits[3:0] is used to specify trigger type and level flags:
- 1 = low-to-high edge triggered.
- 2 = high-to-low edge triggered.
- 4 = active high level-sensitive.
- 8 = active low level-sensitive.
-
-Optional properties:
-- clocks: the clock for clocking the GPIO silicon
-
-Example:
-
-gpio0: gpio@73f84000 {
- compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
- reg = <0x73f84000 0x4000>;
- interrupts = <50 51>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
new file mode 100644
index 000000000000..0b223abe8cfb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX/MXC GPIO controller
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx1-gpio
+ - fsl,imx21-gpio
+ - fsl,imx31-gpio
+ - fsl,imx35-gpio
+ - fsl,imx7d-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ Should be the port interrupt shared by all 32 pins, if one number.
+ If two numbers, the first one is the interrupt shared by low 16 pins
+ and the second one is for high 16 pins.
+ minItems: 1
+ maxItems: 2
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ clocks:
+ maxItems: 1
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - "#gpio-cells"
+ - gpio-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio0: gpio@73f84000 {
+ compatible = "fsl,imx35-gpio";
+ reg = <0x73f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
deleted file mode 100644
index 1e677a47b836..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Freescale MXS GPIO controller
-
-The Freescale MXS GPIO controller is part of MXS PIN controller. The
-GPIOs are organized in port/bank. Each port consists of 32 GPIOs.
-
-As the GPIO controller is embedded in the PIN controller and all the
-GPIO ports share the same IO space with PIN controller, the GPIO node
-will be represented as sub-nodes of MXS pinctrl node.
-
-Required properties for GPIO node:
-- compatible : Should be "fsl,<soc>-gpio". The supported SoCs include
- imx23 and imx28.
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2. The first cell is the GPIO number.
- The second cell bits[3:0] is used to specify trigger type and level flags:
- 1 = low-to-high edge triggered.
- 2 = high-to-low edge triggered.
- 4 = active high level-sensitive.
- 8 = active low level-sensitive.
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Examples:
-
-aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
- gpio4 = &gpio4;
-};
-
-pinctrl@80018000 {
- compatible = "fsl,imx28-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
-
- gpio0: gpio@0 {
- compatible = "fsl,imx28-gpio";
- interrupts = <127>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio@1 {
- compatible = "fsl,imx28-gpio";
- interrupts = <126>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@2 {
- compatible = "fsl,imx28-gpio";
- interrupts = <125>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@3 {
- compatible = "fsl,imx28-gpio";
- interrupts = <124>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@4 {
- compatible = "fsl,imx28-gpio";
- interrupts = <123>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
new file mode 100644
index 000000000000..ccf5b50e798b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS GPIO controller
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+ - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+ The Freescale MXS GPIO controller is part of MXS PIN controller.
+ The GPIOs are organized in port/bank, each port consists of 32 GPIOs.
+ As the GPIO controller is embedded in the PIN controller and all the
+ GPIO ports share the same IO space with PIN controller, the GPIO node
+ will be represented as sub-nodes of MXS pinctrl node.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-pinctrl
+ - fsl,imx28-pinctrl
+
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ "gpio@[0-9]+$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - fsl,imx23-gpio
+ - fsl,imx28-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: Should be the port interrupt shared by all 32 pins.
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - "#gpio-cells"
+ - gpio-controller
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@80018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-pinctrl";
+ reg = <0x80018000 0x2000>;
+
+ gpio@0 {
+ compatible = "fsl,imx28-gpio";
+ reg = <0>;
+ interrupts = <127>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio@1 {
+ compatible = "fsl,imx28-gpio";
+ reg = <1>;
+ interrupts = <126>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio@2 {
+ compatible = "fsl,imx28-gpio";
+ reg = <2>;
+ interrupts = <125>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio@3 {
+ compatible = "fsl,imx28-gpio";
+ reg = <3>;
+ interrupts = <124>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio@4 {
+ compatible = "fsl,imx28-gpio";
+ reg = <4>;
+ interrupts = <123>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
deleted file mode 100644
index 10dce84b1545..000000000000
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-* Renesas R-Car GPIO Controller
-
-Required Properties:
-
- - compatible: should contain one or more of the following:
- - "renesas,gpio-r8a7743": for R8A7743 (RZ/G1M) compatible GPIO controller.
- - "renesas,gpio-r8a7744": for R8A7744 (RZ/G1N) compatible GPIO controller.
- - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller.
- - "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller.
- - "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller.
- - "renesas,gpio-r8a774b1": for R8A774B1 (RZ/G2N) compatible GPIO controller.
- - "renesas,gpio-r8a774c0": for R8A774C0 (RZ/G2E) compatible GPIO controller.
- - "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller.
- - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
- - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
- - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2-W) compatible GPIO controller.
- - "renesas,gpio-r8a7792": for R8A7792 (R-Car V2H) compatible GPIO controller.
- - "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller.
- - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller.
- - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller.
- - "renesas,gpio-r8a7796": for R8A77960 (R-Car M3-W) compatible GPIO controller.
- - "renesas,gpio-r8a77961": for R8A77961 (R-Car M3-W+) compatible GPIO controller.
- - "renesas,gpio-r8a77965": for R8A77965 (R-Car M3-N) compatible GPIO controller.
- - "renesas,gpio-r8a77970": for R8A77970 (R-Car V3M) compatible GPIO controller.
- - "renesas,gpio-r8a77980": for R8A77980 (R-Car V3H) compatible GPIO controller.
- - "renesas,gpio-r8a77990": for R8A77990 (R-Car E3) compatible GPIO controller.
- - "renesas,gpio-r8a77995": for R8A77995 (R-Car D3) compatible GPIO controller.
- - "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller.
- - "renesas,rcar-gen2-gpio": for a generic R-Car Gen2 or RZ/G1 GPIO controller.
- - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 or RZ/G2 GPIO controller.
- - "renesas,gpio-rcar": deprecated.
-
- When compatible with the generic version nodes must list the
- SoC-specific version corresponding to the platform first followed by
- the generic version.
-
- - reg: Base address and length of each memory resource used by the GPIO
- controller hardware module.
-
- - interrupts: Interrupt specifier for the controllers interrupt.
-
- - gpio-controller: Marks the device node as a gpio controller.
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
- cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
- GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: See gpio.txt.
-
-Optional properties:
-
- - clocks: Must contain a reference to the functional clock. The property is
- mandatory if the hardware implements a controllable functional clock for
- the GPIO instance.
-
- - gpio-reserved-ranges: See gpio.txt.
-
-Please refer to gpio.txt in this directory for the common GPIO bindings used by
-client devices.
-
-The GPIO controller also acts as an interrupt controller. It uses the default
-two cells specifier as described in Documentation/devicetree/bindings/
-interrupt-controller/interrupts.txt.
-
-Example: R8A77470 (RZ/G1C) GPIO controller nodes
-
- gpio0: gpio@e6050000 {
- compatible = "renesas,gpio-r8a77470",
- "renesas,rcar-gen2-gpio";
- reg = <0 0xe6050000 0 0x50>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pfc 0 0 23>;
- #interrupt-cells = <2>;
- interrupt-controller;
- clocks = <&cpg CPG_MOD 912>;
- power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
- resets = <&cpg 912>;
- };
- ...
- gpio3: gpio@e6053000 {
- compatible = "renesas,gpio-r8a77470",
- "renesas,rcar-gen2-gpio";
- reg = <0 0xe6053000 0 0x50>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pfc 0 96 30>;
- gpio-reserved-ranges = <17 10>;
- #interrupt-cells = <2>;
- interrupt-controller;
- clocks = <&cpg CPG_MOD 909>;
- power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
- resets = <&cpg 909>;
- };
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
new file mode 100644
index 000000000000..397d9383d15a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/renesas,rcar-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car General-Purpose Input/Output Ports (GPIO)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,gpio-r8a7778 # R-Car M1
+ - renesas,gpio-r8a7779 # R-Car H1
+ - const: renesas,rcar-gen1-gpio # R-Car Gen1
+
+ - items:
+ - enum:
+ - renesas,gpio-r8a7742 # RZ/G1H
+ - renesas,gpio-r8a7743 # RZ/G1M
+ - renesas,gpio-r8a7744 # RZ/G1N
+ - renesas,gpio-r8a7745 # RZ/G1E
+ - renesas,gpio-r8a77470 # RZ/G1C
+ - renesas,gpio-r8a7790 # R-Car H2
+ - renesas,gpio-r8a7791 # R-Car M2-W
+ - renesas,gpio-r8a7792 # R-Car V2H
+ - renesas,gpio-r8a7793 # R-Car M2-N
+ - renesas,gpio-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
+
+ - items:
+ - enum:
+ - renesas,gpio-r8a774a1 # RZ/G2M
+ - renesas,gpio-r8a774b1 # RZ/G2N
+ - renesas,gpio-r8a774c0 # RZ/G2E
+ - renesas,gpio-r8a7795 # R-Car H3
+ - renesas,gpio-r8a7796 # R-Car M3-W
+ - renesas,gpio-r8a77961 # R-Car M3-W+
+ - renesas,gpio-r8a77965 # R-Car M3-N
+ - renesas,gpio-r8a77970 # R-Car V3M
+ - renesas,gpio-r8a77980 # R-Car V3H
+ - renesas,gpio-r8a77990 # R-Car E3
+ - renesas,gpio-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 8
+
+patternProperties:
+ "^.*$":
+ if:
+ type: object
+ then:
+ properties:
+ gpio-hog: true
+ gpios: true
+ input: true
+ output-high: true
+ output-low: true
+ line-name: true
+
+ required:
+ - gpio-hog
+ - gpios
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - interrupt-controller
+ - '#interrupt-cells'
+
+if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen1-gpio
+then:
+ required:
+ - clocks
+ - power-domains
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a77470-sysc.h>
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio";
+ reg = <0xe6053000 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 96 30>;
+ gpio-reserved-ranges = <17 10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
index 418e8381e07c..a0efd8dc2538 100644
--- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
@@ -57,7 +57,7 @@ examples:
compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
interrupt-parent = <&plic>;
interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
- reg = <0x0 0x10060000 0x0 0x1000>;
+ reg = <0x10060000 0x1000>;
clocks = <&tlclk PRCI_CLK_TLCLK>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 0b229a7d4a98..b1844b9c295d 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -43,9 +43,15 @@ properties:
operating-points-v2: true
+ power-domains:
+ maxItems: 1
+
resets:
maxItems: 2
+ "#cooling-cells":
+ const: 2
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 0407e45eb8c4..80d519a76db2 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -16,33 +16,33 @@ properties:
oneOf:
- items:
- enum:
- - samsung,exynos5250-mali
+ - samsung,exynos5250-mali
- const: arm,mali-t604
- items:
- enum:
- - samsung,exynos5420-mali
+ - samsung,exynos5420-mali
- const: arm,mali-t628
- items:
- enum:
- - allwinner,sun50i-h6-mali
+ - allwinner,sun50i-h6-mali
- const: arm,mali-t720
- items:
- enum:
- - amlogic,meson-gxm-mali
- - realtek,rtd1295-mali
+ - amlogic,meson-gxm-mali
+ - realtek,rtd1295-mali
- const: arm,mali-t820
- items:
- enum:
- - arm,juno-mali
+ - arm,juno-mali
- const: arm,mali-t624
- items:
- enum:
- - rockchip,rk3288-mali
- - samsung,exynos5433-mali
+ - rockchip,rk3288-mali
+ - samsung,exynos5433-mali
- const: arm,mali-t760
- items:
- enum:
- - rockchip,rk3399-mali
+ - rockchip,rk3399-mali
- const: arm,mali-t860
# "arm,mali-t830"
@@ -87,6 +87,8 @@ properties:
"#cooling-cells":
const: 2
+ dma-coherent: true
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index 565966c06eeb..6226d31ec4b7 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -108,6 +108,9 @@ properties:
operating-points-v2: true
+ "#cooling-cells":
+ const: 2
+
required:
- compatible
- reg
@@ -166,6 +169,7 @@ examples:
clocks = <&ccu 1>, <&ccu 2>;
clock-names = "bus", "core";
resets = <&ccu 1>;
+ #cooling-cells = <2>;
};
...
diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
index 0bc4b38d5cbb..e1ac6ff5a230 100644
--- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
+++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -9,7 +9,7 @@ title: Vivante GPU Bindings
description: Vivante GPU core devices
maintainers:
- - Lucas Stach <l.stach@pengutronix.de>
+ - Lucas Stach <l.stach@pengutronix.de>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
index 7db78767c02d..af35b77053df 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -34,8 +34,7 @@ properties:
description:
Value specifying the number of pulses per revolution of the controlled
FAN.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4]
required:
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index 44a63fffb4be..eef614962b10 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -38,20 +38,18 @@ properties:
the accumulated values, this entry can also have two items which sets
energy1/charge1 and energy2/charger2 respectively. Check table 12 of the
datasheet for more information on the supported options.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 2
- maxItems: 2
- items:
- enum: [0, 1, 2, 3]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ items:
+ enum: [0, 1, 2, 3]
+ default: 0
adi,accumulation-deadband-microamp:
description:
This property controls the Accumulation Dead band which allows to set the
level of current below which no accumulation takes place.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
maximum: 255
default: 0
@@ -61,8 +59,7 @@ properties:
active high, setting it to zero makets it active low. When this property
is present, the GPIO is automatically configured as output and set to
control a fan as a function of measured temperature.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
default: 0
@@ -74,13 +71,12 @@ properties:
registers. Check table 13 of the datasheet for more information on the
supported options. This property cannot be used together with
adi,gpio-out-pol.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 2
- maxItems: 2
- items:
- enum: [0, 1, 2]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ items:
+ enum: [0, 1, 2]
+ default: 0
required:
- compatible
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 46c441574f98..dfa821c0aacc 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -46,22 +46,20 @@ patternProperties:
set to 1 the attenuator is bypassed if set to 0 the attenuator is
not bypassed. If the property is absent then the attenuator
retains it's configuration from the bios/bootloader.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
"^adi,pwm-active-state$":
description: |
Integer array, represents the active state of the pwm outputs If set to 0
the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
uses a logic high output for 100% duty cycle.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 3
- maxItems: 3
- items:
- enum: [0, 1]
- default: 1
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ items:
+ enum: [0, 1]
+ default: 1
required:
- compatible
diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
deleted file mode 100644
index ffb79ccf51ee..000000000000
--- a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the hardware monitor
-portion of the driver.
-
-This binding must be part of the Lochnagar MFD binding:
- [4] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
- - compatible : One of the following strings:
- "cirrus,lochnagar2-hwmon"
-
-Example:
-
-lochnagar-hwmon {
- compatible = "cirrus,lochnagar2-hwmon";
-};
diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..cc00b97a7dac
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of various
+ application processor systems to provide a full evaluation platform.
+ Audio system topology, clocking and power can all be controlled through
+ the Lochnagar, allowing the device under test to be used in a variety of
+ possible use cases.
+
+ This binding document describes the binding for the hardware monitor
+ portion of the driver.
+
+ This binding must be part of the Lochnagar MFD binding:
+ [1] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-hwmon
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index 3f043e943668..90b2fa3f7752 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -45,16 +45,14 @@ properties:
The gain value for the PGA function. This is 8, 4, 2 or 1.
The PGA gain affect the shunt voltage range.
The range will be equal to: pga-gain * 40mV
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4, 8]
default: 8
ti,bus-range-microvolt:
description: |
This is the operating range of the bus voltage in microvolt
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [16000000, 32000000]
default: 32000000
@@ -63,14 +61,13 @@ properties:
Array of three(TMP513) or two(TMP512) n-Factor value for each remote
temperature channel.
See datasheet Table 11 for n-Factor range list and value interpretation.
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32-array
- - minItems: 2
- maxItems: 3
- items:
- default: 0x00
- minimum: 0x00
- maximum: 0xFF
+ $ref: /schemas/types.yaml#definitions/uint32-array
+ minItems: 2
+ maxItems: 3
+ items:
+ default: 0x00
+ minimum: 0x00
+ maximum: 0xFF
required:
- compatible
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
index c9a6587fe4bb..a8a35df41951 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
@@ -13,7 +13,7 @@ Recommended properties:
Example:
-i2c@20205000 {
+i2c@7e205000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
new file mode 100644
index 000000000000..dc0952f3780f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence I2C controller Device Tree Bindings
+
+maintainers:
+ - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - cdns,i2c-r1p10 # cadence i2c controller version 1.0
+ - cdns,i2c-r1p14 # cadence i2c controller version 1.4
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency:
+ minimum: 1
+ maximum: 400000
+ description: |
+ Desired operating frequency, in Hz, of the bus.
+
+ clock-name:
+ const: pclk
+ description: |
+ Input clock name.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c@e0004000 {
+ compatible = "cdns,i2c-r1p10";
+ clocks = <&clkc 38>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xe0004000 0x1000>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
deleted file mode 100644
index ebaa90c58c8e..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Binding for the Cadence I2C controller
-
-Required properties:
- - reg: Physical base address and size of the controller's register area.
- - compatible: Should contain one of:
- * "cdns,i2c-r1p10"
- Note: Use this when cadence i2c controller version 1.0 is used.
- * "cdns,i2c-r1p14"
- Note: Use this when cadence i2c controller version 1.4 is used.
- - clocks: Input clock specifier. Refer to common clock bindings.
- - interrupts: Interrupt specifier. Refer to interrupt bindings.
- - #address-cells: Should be 1.
- - #size-cells: Should be 0.
-
-Optional properties:
- - clock-frequency: Desired operating frequency, in Hz, of the bus.
- - clock-names: Input clock name, should be 'pclk'.
-
-Example:
- i2c@e0004000 {
- compatible = "cdns,i2c-r1p10";
- clocks = <&clkc 38>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xe0004000 0x1000>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
deleted file mode 100644
index d229eff5ca1b..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Ingenic JZ4780 I2C Bus controller
-
-Required properties:
-- compatible: should be one of the following:
- - "ingenic,jz4780-i2c" for the JZ4780
- - "ingenic,x1000-i2c" for the X1000
-- reg: Should contain the address & size of the I2C controller registers.
-- interrupts: Should specify the interrupt provided by parent.
-- clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
-- clock-frequency: desired I2C bus clock frequency in Hz.
-
-Recommended properties:
-- pinctrl-names: should be "default";
-- pinctrl-0: phandle to pinctrl function
-
-Example
-
-/ {
- i2c4: i2c4@10054000 {
- compatible = "ingenic,jz4780-i2c";
- reg = <0x10054000 0x1000>;
-
- interrupt-parent = <&intc>;
- interrupts = <56>;
-
- clocks = <&cgu JZ4780_CLK_SMB4>;
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pins_i2c4_data>;
-
- };
-};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
index 61eac76c84c4..790aa7218ee0 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -28,14 +28,14 @@ properties:
- const: rockchip,rk3399-i2c
- items:
- enum:
- - rockchip,rk3036-i2c
- - rockchip,rk3368-i2c
+ - rockchip,rk3036-i2c
+ - rockchip,rk3368-i2c
- const: rockchip,rk3288-i2c
- items:
- enum:
- - rockchip,px30-i2c
- - rockchip,rk3308-i2c
- - rockchip,rk3328-i2c
+ - rockchip,px30-i2c
+ - rockchip,rk3308-i2c
+ - rockchip,rk3328-i2c
- const: rockchip,rk3399-i2c
reg:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt b/Documentation/devicetree/bindings/i2c/i2c-xiic.txt
deleted file mode 100644
index caf42e989462..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Xilinx IIC controller:
-
-Required properties:
-- compatible : Must be "xlnx,xps-iic-2.00.a"
-- reg : IIC register location and length
-- interrupts : IIC controller unterrupt
-- #address-cells = <1>
-- #size-cells = <0>
-- clocks: Input clock specifier. Refer to common clock bindings.
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-- clock-names: Input clock name, should be 'pclk'.
-
-Example:
-
- axi_iic_0: i2c@40800000 {
- compatible = "xlnx,xps-iic-2.00.a";
- clocks = <&clkc 15>;
- interrupts = < 1 2 >;
- reg = < 0x40800000 0x10000 >;
-
- #size-cells = <0>;
- #address-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
new file mode 100644
index 000000000000..682ed1bbf5c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs I2C controller devicetree bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ $nodename:
+ pattern: "^i2c@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - ingenic,jz4780-i2c
+ - ingenic,x1000-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ enum: [ 100000, 400000 ]
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-frequency
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ #include <dt-bindings/dma/jz4780-dma.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c@10054000 {
+ compatible = "ingenic,jz4780-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10054000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <56>;
+
+ clocks = <&cgu JZ4780_CLK_SMB4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c4_data>;
+
+ dmas = <&dma JZ4780_DMA_SMB4_RX 0xffffffff>,
+ <&dma JZ4780_DMA_SMB4_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ clock-frequency = <400000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+
+ interrupt-parent = <&gpf>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
index c359965d0724..a03f9f5cb378 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
@@ -2,6 +2,7 @@ I2C for R-Car platforms
Required properties:
- compatible:
+ "renesas,i2c-r8a7742" if the device is a part of a R8A7742 SoC.
"renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
"renesas,i2c-r8a7744" if the device is a part of a R8A7744 SoC.
"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
index ffe085c9947e..89facb09337a 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,iic.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible :
- "renesas,iic-r8a73a4" (R-Mobile APE6)
- "renesas,iic-r8a7740" (R-Mobile A1)
+ - "renesas,iic-r8a7742" (RZ/G1H)
- "renesas,iic-r8a7743" (RZ/G1M)
- "renesas,iic-r8a7744" (RZ/G1N)
- "renesas,iic-r8a7745" (RZ/G1E)
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index 900ec1ab6a47..7b3342354bbb 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -17,6 +17,7 @@ allOf:
contains:
enum:
- st,stm32f7-i2c
+ - st,stm32mp15-i2c
then:
properties:
i2c-scl-rising-time-ns:
@@ -30,11 +31,10 @@ allOf:
Fast Mode Plus speed is selected by slave.
Format is phandle to syscfg / register offset within
syscfg / register bitmask for FMP bit.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
- - items:
- minItems: 3
- maxItems: 3
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ items:
+ minItems: 3
+ maxItems: 3
- if:
properties:
@@ -52,6 +52,7 @@ properties:
enum:
- st,stm32f4-i2c
- st,stm32f7-i2c
+ - st,stm32mp15-i2c
reg:
maxItems: 1
@@ -121,12 +122,12 @@ examples:
clocks = <&rcc 1 CLK_I2C1>;
};
- //Example 3 (with st,stm32f7-i2c compatible on stm32mp)
+ //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
i2c@40013000 {
- compatible = "st,stm32f7-i2c";
+ compatible = "st,stm32mp15-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40013000 0x400>;
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
new file mode 100644
index 000000000000..67c1c84ba3dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ilinx IIC controller Device Tree Bindings
+
+maintainers:
+ - info@mocean-labs.com
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: xlnx,xps-iic-2.00.a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+
+ clock-name:
+ const: pclk
+ description: |
+ Input clock name.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ axi_iic_0: i2c@40800000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ clocks = <&clkc 15>;
+ interrupts = < 1 2 >;
+ reg = < 0x40800000 0x10000 >;
+
+ #size-cells = <0>;
+ #address-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index f0934b295edc..deb34deff0e8 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -72,8 +72,8 @@ patternProperties:
The channel number. It can have up to 8 channels on ad7124-4
and 16 channels on ad7124-8, numbered from 0 to 15.
items:
- minimum: 0
- maximum: 15
+ minimum: 0
+ maximum: 15
adi,reference-select:
description: |
@@ -83,9 +83,8 @@ patternProperties:
1: REFIN2(+)/REFIN2(−).
3: AVDD
If this field is left empty, internal reference is selected.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 3]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 3]
diff-channels:
description: see Documentation/devicetree/bindings/iio/adc/adc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 118809a03279..6a991e9f78e2 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Linear Technology / Analog Devices LTC2496 ADC
maintainers:
- - Lars-Peter Clausen <lars@metafoo.de>
- - Michael Hennerich <Michael.Hennerich@analog.com>
- - Stefan Popa <stefan.popa@analog.com>
+ - Lars-Peter Clausen <lars@metafoo.de>
+ - Michael Hennerich <Michael.Hennerich@analog.com>
+ - Stefan Popa <stefan.popa@analog.com>
properties:
compatible:
@@ -18,8 +18,7 @@ properties:
vref-supply:
description: phandle to an external regulator providing the reference voltage
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
reg:
description: spi chipselect number according to the usual spi bindings
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 8ffeceb6abae..95ab285f4eba 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -38,10 +38,9 @@ properties:
microchip,device-addr:
description: Device address when multiple MCP3911 chips are present on the same SPI bus.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- - default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
vref-supply:
description: |
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index dd8eb15aeb63..28417b31b558 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -76,8 +76,7 @@ properties:
description:
Phandle to system configuration controller. It can be used to control the
analog circuitry on stm32mp1.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
interrupt-controller: true
@@ -247,8 +246,7 @@ patternProperties:
Resolution (bits) to use for conversions:
- can be 6, 8, 10 or 12 on stm32f4
- can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
st,adc-channels:
description: |
@@ -256,8 +254,7 @@ patternProperties:
- 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
- 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
stm32mp1.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
st,adc-diff-channels:
description: |
@@ -270,18 +267,17 @@ patternProperties:
required. Both properties can be used together. Some channels can be
used as single-ended and some other ones as differential (mixed). But
channels can't be configured both as single-ended and differential.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-matrix
- - items:
- items:
- - description: |
- "vinp" indicates positive input number
- minimum: 0
- maximum: 19
- - description: |
- "vinn" indicates negative input number
- minimum: 0
- maximum: 19
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "vinp" indicates positive input number
+ minimum: 0
+ maximum: 19
+ - description: |
+ "vinn" indicates negative input number
+ minimum: 0
+ maximum: 19
st,min-sample-time-nsecs:
description:
@@ -291,8 +287,7 @@ patternProperties:
array that matches "st,adc-channels" and/or "st,adc-diff-channels"
list, to set sample time resp. for all channels, or independently for
each channel.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
allOf:
- if:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index b1627441a0b2..d61bc011e820 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -95,16 +95,14 @@ patternProperties:
On stm32h7 and stm32mp1:
- For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
- For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- minimum: 0
- maximum: 7
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minimum: 0
+ maximum: 7
st,adc-channel-names:
description: List of single-ended channel names.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string-array
+ $ref: /schemas/types.yaml#/definitions/string-array
st,filter-order:
description: |
@@ -112,11 +110,10 @@ patternProperties:
- 0: FastSinC
- [1-5]: order 1 to 5.
For audio purpose it is recommended to use order 3 to 5.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - items:
- minimum: 0
- maximum: 5
+ $ref: /schemas/types.yaml#/definitions/uint32
+ items:
+ minimum: 0
+ maximum: 5
"#io-channel-cells":
const: 1
@@ -130,8 +127,7 @@ patternProperties:
- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
items:
enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
- allOf:
- - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
st,adc-channel-clk-src:
description: |
@@ -142,8 +138,7 @@ patternProperties:
- "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
items:
enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
- allOf:
- - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
st,adc-alt-channel:
description:
diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
deleted file mode 100644
index 900c169de00f..000000000000
--- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope
-and externally connectable Magnetometer
-
-https://www.bosch-sensortec.com/bst/products/all_products/bmi160
-
-Required properties:
- - compatible : should be "bosch,bmi160"
- - reg : the I2C address or SPI chip select number of the sensor
- - spi-max-frequency : set maximum clock frequency (only for SPI)
-
-Optional properties:
- - interrupts : interrupt mapping for IRQ
- - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
- input, set to "INT2" if INT2 pin should be used instead
- - drive-open-drain : set if the specified interrupt pin should be configured as
- open drain. If not set, defaults to push-pull.
-
-Examples:
-
-bmi160@68 {
- compatible = "bosch,bmi160";
- reg = <0x68>;
-
- interrupt-parent = <&gpio4>;
- interrupts = <12 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT1";
-};
-
-bmi160@0 {
- compatible = "bosch,bmi160";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- interrupt-parent = <&gpio2>;
- interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "INT2";
-};
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
new file mode 100644
index 000000000000..0d0ef84e22b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI160
+
+maintainers:
+ - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+ Inertial Measurement Unit with Accelerometer, Gyroscope and externally
+ connectable Magnetometer
+ https://www.bosch-sensortec.com/bst/products/all_products/bmi160
+
+properties:
+ compatible:
+ const: bosch,bmi160
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ enum:
+ - INT1
+ - INT2
+ description: |
+ set to "INT1" if INT1 pin should be used as interrupt input, set
+ to "INT2" if INT2 pin should be used instead
+
+ drive-open-drain:
+ description: |
+ set if the specified interrupt pin should be configured as
+ open drain. If not set, defaults to push-pull.
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ // Example for I2C
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bmi160@68 {
+ compatible = "bosch,bmi160";
+ reg = <0x68>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
+ };
+ };
+ - |
+ // Example for SPI
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bmi160@0 {
+ compatible = "bosch,bmi160";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT2";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
index e8f7d1ada57b..d81229857944 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
+++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
@@ -33,13 +33,12 @@ properties:
amstaos,proximity-diodes:
description: Proximity diodes to enable
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 2
- items:
- minimum: 0
- maximum: 1
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
interrupts:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 8fb46de6641d..40ccbe7b5c13 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -42,10 +42,9 @@ properties:
0 - 50/60Hz rejection
1 - 60Hz rejection
2 - 50Hz rejection
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 2
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 2
'#address-cells':
const: 1
@@ -91,8 +90,7 @@ patternProperties:
7 - Type T Thermocouple
8 - Type B Thermocouple
9 - Custom Thermocouple
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 9
@@ -121,8 +119,7 @@ patternProperties:
more details look at table 69 and 70.
Note should be signed, but dtc doesn't currently maintain the
sign.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+ $ref: /schemas/types.yaml#/definitions/uint64-matrix
minItems: 3
maxItems: 64
items:
@@ -138,8 +135,7 @@ patternProperties:
properties:
adi,sensor-type:
description: Identifies the sensor as a diode.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
const: 28
adi,single-ended:
@@ -196,8 +192,7 @@ patternProperties:
16 - RTD PT-1000 (0.00375)
17 - RTD NI-120
18 - RTD Custom
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 10
maximum: 18
@@ -210,9 +205,8 @@ patternProperties:
description:
Identifies the number of wires used by the RTD. Setting this
property to 5 means 4 wires with Kelvin Rsense.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [2, 3, 4, 5]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2, 3, 4, 5]
adi,rsense-share:
description:
@@ -237,18 +231,16 @@ patternProperties:
description:
This property set the RTD curve used and the corresponding
Callendar-VanDusen constants. Look at table 30 of the datasheet.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 3
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
adi,custom-rtd:
description:
This is a table, where each entry should be a pair of
resistance(ohm)-temperature(K). The entries added here are in uohm
and uK. For more details values look at table 74 and 75.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+ $ref: /schemas/types.yaml#/definitions/uint64-matrix
items:
minItems: 3
maxItems: 64
@@ -260,7 +252,7 @@ patternProperties:
- adi,rsense-handle
dependencies:
- adi,current-rotate: [ adi,rsense-share ]
+ adi,current-rotate: [ "adi,rsense-share" ]
"^thermistor@":
type: object
@@ -280,8 +272,7 @@ patternProperties:
25 - Thermistor Spectrum 1003k 1kohm
26 - Thermistor Custom Steinhart-Hart
27 - Custom Thermistor
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 19
maximum: 27
@@ -314,10 +305,9 @@ patternProperties:
This property controls the magnitude of the excitation current
applied to the thermistor. Value 0 set's the sensor in auto-range
mode.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
- 250000, 500000, 1000000]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
+ 500000, 1000000]
adi,custom-thermistor:
description:
@@ -325,8 +315,7 @@ patternProperties:
resistance(ohm)-temperature(K). The entries added here are in uohm
and uK only for custom thermistors. For more details look at table
78 and 79.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+ $ref: /schemas/types.yaml#/definitions/uint64-matrix
minItems: 3
maxItems: 64
items:
@@ -339,8 +328,7 @@ patternProperties:
be programmed into the device memory using this property. For
Steinhart sensors the coefficients are given in the raw
format. Look at table 82 for more information.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
items:
minItems: 6
maxItems: 6
@@ -349,7 +337,7 @@ patternProperties:
- adi,rsense-handle
dependencies:
- adi,current-rotate: [ adi,rsense-share ]
+ adi,current-rotate: [ "adi,rsense-share" ]
"^adc@":
type: object
@@ -358,8 +346,7 @@ patternProperties:
properties:
adi,sensor-type:
description: Identifies the sensor as a direct adc.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
const: 30
adi,single-ended:
@@ -379,8 +366,7 @@ patternProperties:
adi,sensor-type:
description: Identifies the sensor as a rsense.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
const: 29
adi,rsense-val-milli-ohms:
diff --git a/Documentation/devicetree/bindings/index.rst b/Documentation/devicetree/bindings/index.rst
new file mode 100644
index 000000000000..3837b17c234f
--- /dev/null
+++ b/Documentation/devicetree/bindings/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========
+Device Tree
+===========
+
+.. toctree::
+ :maxdepth: 1
+
+ ABI
+ submitting-patches
+ writing-bindings
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index 5b3b71c9c018..cffd02028d02 100644
--- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -16,8 +16,8 @@ properties:
- const: allwinner,sun4i-a10-lradc-keys
- const: allwinner,sun8i-a83t-r-lradc
- items:
- - const: allwinner,sun50i-a64-lradc
- - const: allwinner,sun8i-a83t-r-lradc
+ - const: allwinner,sun50i-a64-lradc
+ - const: allwinner,sun8i-a83t-r-lradc
reg:
maxItems: 1
@@ -42,9 +42,8 @@ patternProperties:
description: Keycode to emit
channel:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
description: ADC Channel this key is attached to
voltage:
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
deleted file mode 100644
index 4d9a3717eaaf..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Device-Tree bindings for input/gpio_keys_polled.c keyboard driver
-
-Required properties:
- - compatible = "gpio-keys-polled";
- - poll-interval: Poll interval time in milliseconds
-
-Optional properties:
- - autorepeat: Boolean, Enable auto repeat feature of Linux input
- subsystem.
-
-Each button (key) is represented as a sub-node of "gpio-keys-polled":
-Subnode properties:
-
- - gpios: OF device-tree gpio specification.
- - label: Descriptive name of the key.
- - linux,code: Key / Axis code to emit.
-
-Optional subnode-properties:
- - linux,input-type: Specify event type this button/key generates.
- If not specified defaults to <1> == EV_KEY.
- - linux,input-value: If linux,input-type is EV_ABS or EV_REL then this
- value is sent for events this button generates when pressed.
- EV_ABS/EV_REL axis will generate an event with a value of 0 when
- all buttons with linux,input-type == type and linux,code == axis
- are released. This value is interpreted as a signed 32 bit value,
- e.g. to make a button generate a value of -1 use:
- linux,input-value = <0xffffffff>; /* -1 */
- - debounce-interval: Debouncing interval time in milliseconds.
- If not specified defaults to 5.
- - wakeup-source: Boolean, button can wake-up the system.
- (Legacy property supported: "gpio-key,wakeup")
-
-Example nodes:
-
- gpio_keys_polled {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- autorepeat;
-
- button21 {
- label = "GPIO Key UP";
- linux,code = <103>;
- gpios = <&gpio1 0 1>;
- };
- ...
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
deleted file mode 100644
index 7cccc49b6bea..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
-
-Required properties:
- - compatible = "gpio-keys";
-
-Optional properties:
- - autorepeat: Boolean, Enable auto repeat feature of Linux input
- subsystem.
- - label: String, name of the input device.
-
-Each button (key) is represented as a sub-node of "gpio-keys":
-Subnode properties:
-
- - gpios: OF device-tree gpio specification.
- - interrupts: the interrupt line for that input.
- - label: Descriptive name of the key.
- - linux,code: Keycode to emit.
-
-Note that either "interrupts" or "gpios" properties can be omitted, but not
-both at the same time. Specifying both properties is allowed.
-
-Optional subnode-properties:
- - linux,input-type: Specify event type this button/key generates.
- If not specified defaults to <1> == EV_KEY.
- - debounce-interval: Debouncing interval time in milliseconds.
- If not specified defaults to 5.
- - wakeup-source: Boolean, button can wake-up the system.
- (Legacy property supported: "gpio-key,wakeup")
- - wakeup-event-action: Specifies whether the key should wake the
- system when asserted, when deasserted, or both. This property is
- only valid for keys that wake up the system (e.g., when the
- "wakeup-source" property is also provided).
- Supported values are defined in linux-event-codes.h:
- EV_ACT_ASSERTED - asserted
- EV_ACT_DEASSERTED - deasserted
- EV_ACT_ANY - both asserted and deasserted
- - linux,can-disable: Boolean, indicates that button is connected
- to dedicated (not shared) interrupt which can be disabled to
- suppress events from the button.
-
-Example nodes:
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- up {
- label = "GPIO Key UP";
- linux,code = <103>;
- gpios = <&gpio1 0 1>;
- };
-
- down {
- label = "GPIO Key DOWN";
- linux,code = <108>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- };
- ...
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
new file mode 100644
index 000000000000..6966ab009fa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for GPIO attached keys
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - gpio-keys
+ - gpio-keys-polled
+
+patternProperties:
+ ".*":
+ if:
+ type: object
+ then:
+ $ref: input.yaml#
+
+ properties:
+ gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ label:
+ description: Descriptive name of the key.
+
+ linux,code:
+ description: Key / Axis code to emit.
+ $ref: /schemas/types.yaml#definitions/uint32
+
+ linux,input-type:
+ description:
+ Specify event type this button/key generates. If not specified defaults to
+ <1> == EV_KEY.
+ $ref: /schemas/types.yaml#definitions/uint32
+
+ default: 1
+
+ linux,input-value:
+ description: |
+ If linux,input-type is EV_ABS or EV_REL then this
+ value is sent for events this button generates when pressed.
+ EV_ABS/EV_REL axis will generate an event with a value of 0
+ when all buttons with linux,input-type == type and
+ linux,code == axis are released. This value is interpreted
+ as a signed 32 bit value, e.g. to make a button generate a
+ value of -1 use:
+
+ linux,input-value = <0xffffffff>; /* -1 */
+
+ $ref: /schemas/types.yaml#definitions/uint32
+
+ debounce-interval:
+ description:
+ Debouncing interval time in milliseconds. If not specified defaults to 5.
+ $ref: /schemas/types.yaml#definitions/uint32
+
+ default: 5
+
+ wakeup-source:
+ description: Button can wake-up the system.
+
+ wakeup-event-action:
+ description: |
+ Specifies whether the key should wake the system when asserted, when
+ deasserted, or both. This property is only valid for keys that wake up the
+ system (e.g., when the "wakeup-source" property is also provided).
+
+ Supported values are defined in linux-event-codes.h:
+
+ EV_ACT_ANY - both asserted and deasserted
+ EV_ACT_ASSERTED - asserted
+ EV_ACT_DEASSERTED - deasserted
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [0, 1, 2]
+
+ linux,can-disable:
+ description:
+ Indicates that button is connected to dedicated (not shared) interrupt
+ which can be disabled to suppress events from the button.
+ type: boolean
+
+ pinctrl-0:
+ maxItems: 1
+
+ pinctrl-names:
+ maxItems: 1
+
+ required:
+ - linux,code
+
+ anyOf:
+ - required:
+ - interrupts
+ - required:
+ - gpios
+
+ dependencies:
+ wakeup-event-action: [ wakeup-source ]
+ linux,input-value: [ gpios ]
+
+ unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ const: gpio-keys-polled
+then:
+ properties:
+ poll-interval:
+ description:
+ Poll interval time in milliseconds
+ $ref: /schemas/types.yaml#definitions/uint32
+
+ required:
+ - poll-interval
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ up {
+ label = "GPIO Key UP";
+ linux,code = <103>;
+ gpios = <&gpio1 0 1>;
+ };
+
+ down {
+ label = "GPIO Key DOWN";
+ linux,code = <108>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
index 6d519046b3af..8edcb3c31270 100644
--- a/Documentation/devicetree/bindings/input/input.yaml
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -18,11 +18,10 @@ properties:
description:
Specifies an array of numeric keycode values to be used for reporting
button presses.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- minimum: 0
- maximum: 0xff
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minimum: 0
+ maximum: 0xff
poll-interval:
description: Poll interval time in milliseconds.
diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
index 5625c222903a..77fe3b545b35 100644
--- a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -30,10 +30,9 @@ properties:
- azoteq,iqs625-keys
linux,keycodes:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 16
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 16
description: |
Specifies the numeric keycodes associated with each available touch or
proximity event according to the following table. An 'x' indicates the
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 383d64a91854..024b262a2ef7 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -42,7 +42,7 @@ properties:
- focaltech,ft6236
reg:
- const: 0x38
+ maxItems: 1
interrupts:
maxItems: 1
@@ -61,33 +61,29 @@ properties:
gain:
description: Allows setting the sensitivity in the range from 0 to 31.
Note that lower values indicate higher sensitivity.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 31
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
offset:
description: Allows setting the edge compensation in the range from 0 to 31.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 31
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
offset-x:
description: Same as offset, but applies only to the horizontal position.
Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 80
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 80
offset-y:
description: Same as offset, but applies only to the vertical position.
Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 80
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 80
touchscreen-size-x: true
touchscreen-size-y: true
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index c8ea9434c9cc..e81cfa56f25a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -63,7 +63,7 @@ required:
- interrupts
examples:
-- |
+ - |
i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
index 4107e60cab12..e1009ae4e8f7 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
@@ -10,8 +10,8 @@ maintainers:
- Georgi Djakov <georgi.djakov@linaro.org>
description: |
- The Qualcomm MSM8916 interconnect providers support adjusting the
- bandwidth requirements between the various NoC fabrics.
+ The Qualcomm MSM8916 interconnect providers support adjusting the
+ bandwidth requirements between the various NoC fabrics.
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
index 9af3c6e59cff..8004c4baf397 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
@@ -10,8 +10,8 @@ maintainers:
- Brian Masney <masneyb@onstation.org>
description: |
- The Qualcomm MSM8974 interconnect providers support setting system
- bandwidth requirements between various network-on-chip fabrics.
+ The Qualcomm MSM8974 interconnect providers support setting system
+ bandwidth requirements between various network-on-chip fabrics.
properties:
reg:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
index 8d65c5f80679..3fbb8785fbc9 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
@@ -10,8 +10,8 @@ maintainers:
- Georgi Djakov <georgi.djakov@linaro.org>
description: |
- The Qualcomm QCS404 interconnect providers support adjusting the
- bandwidth requirements between the various NoC fabrics.
+ The Qualcomm QCS404 interconnect providers support adjusting the
+ bandwidth requirements between the various NoC fabrics.
properties:
reg:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
index 50f78f87f3fb..d01bac80d416 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
@@ -65,21 +65,21 @@ examples:
config_noc: interconnect@1500000 {
compatible = "qcom,sc7180-config-noc";
- reg = <0 0x01500000 0 0x28000>;
+ reg = <0x01500000 0x28000>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sc7180-system-noc";
- reg = <0 0x01620000 0 0x17080>;
+ reg = <0x01620000 0x17080>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sc7180-mmss-noc";
- reg = <0 0x01740000 0 0x1c100>;
+ reg = <0x01740000 0x1c100>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
index 8b087e0b0b81..74536747b51d 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
@@ -60,14 +60,14 @@ examples:
mem_noc: interconnect@1380000 {
compatible = "qcom,sdm845-mem-noc";
- reg = <0 0x01380000 0 0x27200>;
+ reg = <0x01380000 0x27200>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sdm845-mmss-noc";
- reg = <0 0x01740000 0 0x1c1000>;
+ reg = <0x01740000 0x1c1000>;
#interconnect-cells = <1>;
qcom,bcm-voter-names = "apps", "disp";
qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index cf09055da78b..7cd6b8bacfa0 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -27,15 +27,15 @@ properties:
deprecated: true
- const: allwinner,sun7i-a20-sc-nmi
- items:
- - const: allwinner,sun8i-a83t-r-intc
- - const: allwinner,sun6i-a31-r-intc
+ - const: allwinner,sun8i-a83t-r-intc
+ - const: allwinner,sun6i-a31-r-intc
- const: allwinner,sun9i-a80-sc-nmi
- items:
- - const: allwinner,sun50i-a64-r-intc
- - const: allwinner,sun6i-a31-r-intc
+ - const: allwinner,sun50i-a64-r-intc
+ - const: allwinner,sun6i-a31-r-intc
- items:
- - const: allwinner,sun50i-h6-r-intc
- - const: allwinner,sun6i-a31-r-intc
+ - const: allwinner,sun50i-h6-r-intc
+ - const: allwinner,sun6i-a31-r-intc
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index 66aacd106503..1ecd1831cf02 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -91,18 +91,16 @@ properties:
description:
If using padding pages, specifies the stride of consecutive
redistributors. Must be a multiple of 64kB.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint64
- - multipleOf: 0x10000
- exclusiveMinimum: 0
+ $ref: /schemas/types.yaml#/definitions/uint64
+ multipleOf: 0x10000
+ exclusiveMinimum: 0
"#redistributor-regions":
description:
The number of independent contiguous regions occupied by the
redistributors. Required if more than one such region is present.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maximum: 4096 # Should be enough?
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 4096
msi-controller:
description:
@@ -114,22 +112,20 @@ properties:
A list of pairs <intid span>, where "intid" is the first SPI of a range
that can be used an MBI, and "span" the size of that range. Multiple
ranges can be provided.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-matrix
- - items:
- minItems: 2
- maxItems: 2
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ minItems: 2
+ maxItems: 2
mbi-alias:
description:
Address property. Base address of an alias of the GICD region containing
only the {SET,CLR}SPI registers to be used if isolation is required,
and if supported by the HW.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- minItems: 1
- maxItems: 2
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minItems: 1
+ maxItems: 2
ppi-partitions:
type: object
@@ -188,11 +184,10 @@ patternProperties:
description:
(u32, u32) tuple describing the untranslated
address and size of the pre-ITS window.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- minItems: 2
- maxItems: 2
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minItems: 2
+ maxItems: 2
required:
- compatible
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
index 9a47820ef346..96f8803ff4e6 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -40,6 +40,12 @@ properties:
- qcom,msm-qgic2
- items:
+ - const: arm,gic-400
+ - enum:
+ - arm,cortex-a15-gic
+ - arm,cortex-a7-gic
+
+ - items:
- const: arm,arm1176jzf-devchip-gic
- const: arm,arm11mp-gic
@@ -125,6 +131,9 @@ properties:
power-domains:
maxItems: 1
+ resets:
+ maxItems: 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
deleted file mode 100644
index 582991c426ee..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Freescale IRQSTEER Interrupt multiplexer
-
-Required properties:
-
-- compatible: should be:
- - "fsl,imx8m-irqsteer"
- - "fsl,imx-irqsteer"
-- reg: Physical base address and size of registers.
-- interrupts: Should contain the up to 8 parent interrupt lines used to
- multiplex the input interrupts. They should be specified sequentially
- from output 0 to 7.
-- clocks: Should contain one clock for entry in clock-names
- see Documentation/devicetree/bindings/clock/clock-bindings.txt
-- clock-names:
- - "ipg": main logic clock
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
- interrupt source. The value must be 1.
-- fsl,channel: The output channel that all input IRQs should be steered into.
-- fsl,num-irqs: Number of input interrupts of this channel.
- Should be multiple of 32 input interrupts and up to 512 interrupts.
-
-Example:
-
- interrupt-controller@32e2d000 {
- compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
- reg = <0x32e2d000 0x1000>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
- clock-names = "ipg";
- fsl,channel = <0>;
- fsl,num-irqs = <64>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
new file mode 100644
index 000000000000..360a575ef8b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IRQSTEER Interrupt Multiplexer
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8m-irqsteer
+ - fsl,imx-irqsteer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ should contain the up to 8 parent interrupt lines used to multiplex
+ the input interrupts. They should be specified sequentially from
+ output 0 to 7.
+ items:
+ - description: output interrupt 0
+ - description: output interrupt 1
+ - description: output interrupt 2
+ - description: output interrupt 3
+ - description: output interrupt 4
+ - description: output interrupt 5
+ - description: output interrupt 6
+ - description: output interrupt 7
+ minItems: 1
+ maxItems: 8
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipg
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ fsl,channel:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: |
+ u32 value representing the output channel that all input IRQs should be
+ steered into.
+
+ fsl,num-irqs:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: |
+ u32 value representing the number of input interrupts of this channel,
+ should be multiple of 32 input interrupts and up to 512 interrupts.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - interrupt-controller
+ - "#interrupt-cells"
+ - fsl,channel
+ - fsl,num-irqs
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mq-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ interrupt-controller@32e2d000 {
+ compatible = "fsl,imx-irqsteer";
+ reg = <0x32e2d000 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+ clock-names = "ipg";
+ fsl,channel = <0>;
+ fsl,num-irqs = <64>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
deleted file mode 100644
index d4373d0f7121..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Ingenic SoC Interrupt Controller
-
-Required properties:
-
-- compatible : should be "ingenic,<socname>-intc". Valid strings are:
- ingenic,jz4740-intc
- ingenic,jz4725b-intc
- ingenic,jz4770-intc
- ingenic,jz4775-intc
- ingenic,jz4780-intc
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value shall be 1.
-- interrupts : Specifies the CPU interrupt the controller is connected to.
-
-Example:
-
-intc: interrupt-controller@10001000 {
- compatible = "ingenic,jz4740-intc";
- reg = <0x10001000 0x14>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
new file mode 100644
index 000000000000..28b27e1a6e9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ingenic,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs interrupt controller devicetree bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ $nodename:
+ pattern: "^interrupt-controller@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-intc
+ - ingenic,jz4760-intc
+ - ingenic,jz4780-intc
+ - items:
+ - enum:
+ - ingenic,jz4775-intc
+ - ingenic,jz4770-intc
+ - const: ingenic,jz4760-intc
+ - items:
+ - const: ingenic,x1000-intc
+ - const: ingenic,jz4780-intc
+ - items:
+ - const: ingenic,jz4725b-intc
+ - const: ingenic,jz4740-intc
+
+ "#interrupt-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#interrupt-cells"
+ - interrupt-controller
+
+examples:
+ - |
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4770-intc", "ingenic,jz4760-intc";
+ reg = <0x10001000 0x40>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
index ccc507f384d2..14dced11877b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -25,10 +25,10 @@ properties:
compatible:
items:
- enum:
- - intel,ixp42x-interrupt
- - intel,ixp43x-interrupt
- - intel,ixp45x-interrupt
- - intel,ixp46x-interrupt
+ - intel,ixp42x-interrupt
+ - intel,ixp43x-interrupt
+ - intel,ixp45x-interrupt
+ - intel,ixp46x-interrupt
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 26f1fcf0857a..b1db21ed44e9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -54,11 +54,9 @@ properties:
and each bit in the cell refers to a children interrupt fron 0 to 31.
If a CPU interrupt line didn't connected with liointc, then keep it's
cell with zero.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 4
- maxItems: 4
-
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 4
+ maxItems: 4
required:
- compatible
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
deleted file mode 100644
index 772c550d3b4b..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-DT bindings for the R-/SH-Mobile irqpin controller
-
-Required properties:
-
-- compatible: has to be "renesas,intc-irqpin-<soctype>", "renesas,intc-irqpin"
- as fallback.
- Examples with soctypes are:
- - "renesas,intc-irqpin-r8a7740" (R-Mobile A1)
- - "renesas,intc-irqpin-r8a7778" (R-Car M1A)
- - "renesas,intc-irqpin-r8a7779" (R-Car H1)
- - "renesas,intc-irqpin-sh73a0" (SH-Mobile AG5)
-
-- reg: Base address and length of each register bank used by the external
- IRQ pins driven by the interrupt controller hardware module. The base
- addresses, length and number of required register banks varies with soctype.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
- interrupts.txt in this directory.
-- interrupts: Must contain a list of interrupt specifiers. For each interrupt
- provided by this irqpin controller instance, there must be one entry,
- referring to the corresponding parent interrupt.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
- properties
-- sense-bitfield-width: width of a single sense bitfield in the SENSE register,
- if different from the default 4 bits
-- control-parent: disable and enable interrupts on the parent interrupt
- controller, needed for some broken implementations
-- clocks: Must contain a reference to the functional clock. This property is
- mandatory if the hardware implements a controllable functional clock for
- the irqpin controller instance.
-- power-domains: Must contain a reference to the power domain. This property is
- mandatory if the irqpin controller instance is part of a controllable power
- domain.
-
-
-Example
--------
-
- irqpin1: interrupt-controller@e6900004 {
- compatible = "renesas,intc-irqpin-r8a7740",
- "renesas,intc-irqpin";
- #interrupt-cells = <2>;
- interrupt-controller;
- reg = <0xe6900004 4>,
- <0xe6900014 4>,
- <0xe6900024 1>,
- <0xe6900044 1>,
- <0xe6900064 1>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
- power-domains = <&pd_a4s>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml
new file mode 100644
index 000000000000..f4aae56c6469
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,intc-irqpin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Interrupt Controller (INTC) for external pins
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,intc-irqpin-r8a7740 # R-Mobile A1
+ - renesas,intc-irqpin-r8a7778 # R-Car M1A
+ - renesas,intc-irqpin-r8a7779 # R-Car H1
+ - renesas,intc-irqpin-sh73a0 # SH-Mobile AG5
+ - const: renesas,intc-irqpin
+
+ reg:
+ minItems: 5
+ items:
+ - description: Interrupt control register
+ - description: Interrupt priority register
+ - description: Interrupt source register
+ - description: Interrupt mask register
+ - description: Interrupt mask clear register
+ - description: Interrupt control register for ICR0 with IRLM0 bit
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+
+ sense-bitfield-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2, 4]
+ default: 4
+ description:
+ Width of a single sense bitfield in the SENSE register, if different from the
+ default.
+
+ control-parent:
+ type: boolean
+ description:
+ Disable and enable interrupts on the parent interrupt controller, needed for some
+ broken implementations.
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,intc-irqpin-r8a7740
+ - renesas,intc-irqpin-sh73a0
+then:
+ required:
+ - clocks
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7740-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ irqpin1: interrupt-controller@e6900004 {
+ compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+ reg = <0xe6900004 4>,
+ <0xe6900014 4>,
+ <0xe6900024 1>,
+ <0xe6900044 1>,
+ <0xe6900064 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
index ee5273b6c5a3..b67b8cbd33fc 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
@@ -14,6 +14,7 @@ properties:
items:
- enum:
- renesas,irqc-r8a73a4 # R-Mobile APE6
+ - renesas,irqc-r8a7742 # RZ/G1H
- renesas,irqc-r8a7743 # RZ/G1M
- renesas,irqc-r8a7744 # RZ/G1N
- renesas,irqc-r8a7745 # RZ/G1E
@@ -78,7 +79,7 @@ examples:
compatible = "renesas,irqc-r8a7790", "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
- reg = <0 0xe61c0000 0 0x200>;
+ reg = <0xe61c0000 0x200>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
index 9e5c6608b4e3..2a5b29567926 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
@@ -14,13 +14,13 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - st,stm32-exti
- - st,stm32h7-exti
+ - enum:
+ - st,stm32-exti
+ - st,stm32h7-exti
- items:
- - enum:
- - st,stm32mp1-exti
- - const: syscon
+ - enum:
+ - st,stm32mp1-exti
+ - const: syscon
"#interrupt-cells":
const: 2
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 986098bce02d..218f7ecb4703 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -57,8 +57,7 @@ properties:
'#global-interrupts':
description: The number of global interrupts exposed by the device.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
deleted file mode 100644
index 020d6f226efb..000000000000
--- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Renesas VMSA-Compatible IOMMU
-
-The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables.
-It provides address translation for bus masters outside of the CPU, each
-connected to the IPMMU through a port called micro-TLB.
-
-
-Required Properties:
-
- - compatible: Must contain SoC-specific and generic entry below in case
- the device is compatible with the R-Car Gen2 VMSA-compatible IPMMU.
-
- - "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU.
- - "renesas,ipmmu-r8a7743" for the R8A7743 (RZ/G1M) IPMMU.
- - "renesas,ipmmu-r8a7744" for the R8A7744 (RZ/G1N) IPMMU.
- - "renesas,ipmmu-r8a7745" for the R8A7745 (RZ/G1E) IPMMU.
- - "renesas,ipmmu-r8a774a1" for the R8A774A1 (RZ/G2M) IPMMU.
- - "renesas,ipmmu-r8a774b1" for the R8A774B1 (RZ/G2N) IPMMU.
- - "renesas,ipmmu-r8a774c0" for the R8A774C0 (RZ/G2E) IPMMU.
- - "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU.
- - "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU.
- - "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU.
- - "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU.
- - "renesas,ipmmu-r8a7795" for the R8A7795 (R-Car H3) IPMMU.
- - "renesas,ipmmu-r8a7796" for the R8A7796 (R-Car M3-W) IPMMU.
- - "renesas,ipmmu-r8a77965" for the R8A77965 (R-Car M3-N) IPMMU.
- - "renesas,ipmmu-r8a77970" for the R8A77970 (R-Car V3M) IPMMU.
- - "renesas,ipmmu-r8a77980" for the R8A77980 (R-Car V3H) IPMMU.
- - "renesas,ipmmu-r8a77990" for the R8A77990 (R-Car E3) IPMMU.
- - "renesas,ipmmu-r8a77995" for the R8A77995 (R-Car D3) IPMMU.
- - "renesas,ipmmu-vmsa" for generic R-Car Gen2 or RZ/G1 VMSA-compatible
- IPMMU.
-
- - reg: Base address and size of the IPMMU registers.
- - interrupts: Specifiers for the MMU fault interrupts. For instances that
- support secure mode two interrupts must be specified, for non-secure and
- secure mode, in that order. For instances that don't support secure mode a
- single interrupt must be specified. Not required for cache IPMMUs.
-
- - #iommu-cells: Must be 1.
-
-Optional properties:
-
- - renesas,ipmmu-main: reference to the main IPMMU instance in two cells.
- The first cell is a phandle to the main IPMMU and the second cell is
- the interrupt bit number associated with the particular cache IPMMU device.
- The interrupt bit number needs to match the main IPMMU IMSSTR register.
- Only used by cache IPMMU instances.
-
-
-Each bus master connected to an IPMMU must reference the IPMMU in its device
-node with the following property:
-
- - iommus: A reference to the IPMMU in two cells. The first cell is a phandle
- to the IPMMU and the second cell the number of the micro-TLB that the
- device is connected to.
-
-
-Example: R8A7791 IPMMU-MX and VSP1-D0 bus master
-
- ipmmu_mx: mmu@fe951000 {
- compatible = "renasas,ipmmu-r8a7791", "renasas,ipmmu-vmsa";
- reg = <0 0xfe951000 0 0x1000>;
- interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
- #iommu-cells = <1>;
- };
-
- vsp@fe928000 {
- ...
- iommus = <&ipmmu_mx 13>;
- ...
- };
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
new file mode 100644
index 000000000000..39675cf4ed71
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/renesas,ipmmu-vmsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas VMSA-Compatible IOMMU
+
+maintainers:
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description:
+ The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables.
+ It provides address translation for bus masters outside of the CPU, each
+ connected to the IPMMU through a port called micro-TLB.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,ipmmu-r8a73a4 # R-Mobile APE6
+ - renesas,ipmmu-r8a7743 # RZ/G1M
+ - renesas,ipmmu-r8a7744 # RZ/G1N
+ - renesas,ipmmu-r8a7745 # RZ/G1E
+ - renesas,ipmmu-r8a7790 # R-Car H2
+ - renesas,ipmmu-r8a7791 # R-Car M2-W
+ - renesas,ipmmu-r8a7793 # R-Car M2-N
+ - renesas,ipmmu-r8a7794 # R-Car E2
+ - const: renesas,ipmmu-vmsa # R-Mobile APE6 or R-Car Gen2 or RZ/G1
+ - items:
+ - enum:
+ - renesas,ipmmu-r8a774a1 # RZ/G2M
+ - renesas,ipmmu-r8a774b1 # RZ/G2N
+ - renesas,ipmmu-r8a774c0 # RZ/G2E
+ - renesas,ipmmu-r8a7795 # R-Car H3
+ - renesas,ipmmu-r8a7796 # R-Car M3-W
+ - renesas,ipmmu-r8a77965 # R-Car M3-N
+ - renesas,ipmmu-r8a77970 # R-Car V3M
+ - renesas,ipmmu-r8a77980 # R-Car V3H
+ - renesas,ipmmu-r8a77990 # R-Car E3
+ - renesas,ipmmu-r8a77995 # R-Car D3
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ description:
+ Specifiers for the MMU fault interrupts. Not required for cache IPMMUs.
+ items:
+ - description: non-secure mode
+ - description: secure mode if supported
+
+ '#iommu-cells':
+ const: 1
+ description:
+ The number of the micro-TLB that the device is connected to.
+
+ power-domains:
+ maxItems: 1
+
+ renesas,ipmmu-main:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Reference to the main IPMMU phandle plus 1 cell. The cell is
+ the interrupt bit number associated with the particular cache IPMMU
+ device. The interrupt bit number needs to match the main IPMMU IMSSTR
+ register. Only used by cache IPMMU instances.
+
+required:
+ - compatible
+ - reg
+ - '#iommu-cells'
+ - power-domains
+
+oneOf:
+ - required:
+ - interrupts
+ - required:
+ - renesas,ipmmu-main
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7791-sysc.h>
+
+ ipmmu_mx: iommu@fe951000 {
+ compatible = "renasas,ipmmu-r8a7791", "renasas,ipmmu-vmsa";
+ reg = <0xfe951000 0x1000>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index 0e33cd9e010e..af51b91c893e 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -54,13 +54,13 @@ properties:
clock-names:
oneOf:
- items:
- - const: sysmmu
+ - const: sysmmu
- items:
- - const: sysmmu
- - const: master
+ - const: sysmmu
+ - const: master
- items:
- - const: aclk
- - const: pclk
+ - const: aclk
+ - const: pclk
"#iommu-cells":
const: 0
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
deleted file mode 100644
index d5f1a877ed3e..000000000000
--- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-IPMI device
-
-Required properties:
-- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
-- device_type: should be ipmi
-- reg: Address and length of the register set for the device
-
-Optional properties:
-- interrupts: The interrupt for the device. Without this the interface
- is polled.
-- reg-size - The size of the register. Defaults to 1
-- reg-spacing - The number of bytes between register starts. Defaults to 1
-- reg-shift - The amount to shift the registers to the right to get the data
- into bit zero.
-
-Example:
-
-smic@fff3a000 {
- compatible = "ipmi-smic";
- device_type = "ipmi";
- reg = <0xfff3a000 0x1000>;
- interrupts = <0 24 4>;
- reg-size = <4>;
- reg-spacing = <4>;
-};
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
new file mode 100644
index 000000000000..f0bb157e9417
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IPMI device bindings
+
+description: IPMI device bindings
+
+maintainers:
+ - Corey Minyard <cminyard@mvista.com>
+
+properties:
+ compatible:
+ enum:
+ - ipmi-kcs
+ - ipmi-smic
+ - ipmi-bt
+
+ device_type:
+ items:
+ - const: "ipmi"
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: Interface is polled if this property is omitted.
+ maxItems: 1
+
+ reg-size:
+ description: The access width of the register in bytes. Defaults to 1.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [1, 2, 4, 8]
+
+ reg-spacing:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The number of bytes between register starts. Defaults to 1.
+
+ reg-shift:
+ description: |
+ The amount of bits to shift the register content to the right to get
+ the data into bit zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - maximum: 56
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ smic@fff3a000 {
+ compatible = "ipmi-smic";
+ device_type = "ipmi";
+ reg = <0xfff3a000 0x1000>;
+ interrupts = <0 24 4>;
+ reg-size = <4>;
+ reg-spacing = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 4c270fde4567..a2a541bca73c 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -41,8 +41,7 @@ properties:
Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
the header include/dt-bindings/leds/common.h. If there is no matching
LED_COLOR_ID available, add a new one.
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#definitions/uint32
minimum: 0
maximum: 8
@@ -67,8 +66,7 @@ properties:
produced where the LED momentarily turns off (or on). The "keep" setting
will keep the LED at whatever its current state is, without producing a
glitch.
- allOf:
- - $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#definitions/string
enum:
- on
- off
@@ -79,8 +77,8 @@ properties:
description:
This parameter, if present, is a string defining the trigger assigned to
the LED.
- allOf:
- - $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#definitions/string
+
enum:
# LED will act as a back-light, controlled by the framebuffer system
- backlight
@@ -111,8 +109,7 @@ properties:
brightness and duration (in ms). The exact format is
described in:
Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32-matrix
+ $ref: /schemas/types.yaml#definitions/uint32-matrix
items:
minItems: 2
maxItems: 2
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
index 0e75b185dd19..7ad2baeda0b0 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
@@ -24,8 +24,7 @@ patternProperties:
"(^led-[0-9a-f]$|led)":
type: object
- allOf:
- - $ref: common.yaml#
+ $ref: common.yaml#
properties:
gpios:
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index 90edf9d33b33..86a37c92b834 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -34,11 +34,10 @@ patternProperties:
#- $ref: "common.yaml#"
rohm,led-compatible:
description: LED identification string
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/string"
- - enum:
- - bd71828-ambled
- - bd71828-grnled
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum:
+ - bd71828-ambled
+ - bd71828-grnled
function:
description:
Purpose of LED as defined in dt-bindings/leds/common.h
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
deleted file mode 100644
index 31486c9f6443..000000000000
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-NXP i.MX Messaging Unit (MU)
---------------------------------------------------------------------
-
-The Messaging Unit module enables two processors within the SoC to
-communicate and coordinate by passing messages (e.g. data, status
-and control) through the MU interface. The MU also provides the ability
-for one processor to signal the other processor using interrupts.
-
-Because the MU manages the messaging between processors, the MU uses
-different clocks (from each side of the different peripheral buses).
-Therefore, the MU must synchronize the accesses from one side to the
-other. The MU accomplishes synchronization using two sets of matching
-registers (Processor A-facing, Processor B-facing).
-
-Messaging Unit Device Node:
-=============================
-
-Required properties:
--------------------
-- compatible : should be "fsl,<chip>-mu", the supported chips include
- imx6sx, imx7s, imx8qxp, imx8qm.
- The "fsl,imx6sx-mu" compatible is seen as generic and should
- be included together with SoC specific compatible.
- There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu"
- compatible to support it.
- To communicate with i.MX8 SCU, "fsl,imx8-mu-scu" could be
- used for fast IPC
-- reg : Should contain the registers location and length
-- interrupts : Interrupt number. The interrupt specifier format depends
- on the interrupt controller parent.
-- #mbox-cells: Must be 2.
- <&phandle type channel>
- phandle : Label name of controller
- type : Channel type
- channel : Channel number
-
- This MU support 4 type of unidirectional channels, each type
- has 4 channels. A total of 16 channels. Following types are
- supported:
- 0 - TX channel with 32bit transmit register and IRQ transmit
- acknowledgment support.
- 1 - RX channel with 32bit receive register and IRQ support
- 2 - TX doorbell channel. Without own register and no ACK support.
- 3 - RX doorbell channel.
-
-Optional properties:
--------------------
-- clocks : phandle to the input clock.
-- fsl,mu-side-b : Should be set for side B MU.
-
-Examples:
---------
-lsio_mu0: mailbox@5d1b0000 {
- compatible = "fsl,imx8qxp-mu";
- reg = <0x0 0x5d1b0000 0x0 0x10000>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
new file mode 100644
index 000000000000..3b35eb5ac3f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/fsl,mu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX Messaging Unit (MU)
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: |
+ The Messaging Unit module enables two processors within the SoC to
+ communicate and coordinate by passing messages (e.g. data, status
+ and control) through the MU interface. The MU also provides the ability
+ for one processor to signal the other processor using interrupts.
+
+ Because the MU manages the messaging between processors, the MU uses
+ different clocks (from each side of the different peripheral buses).
+ Therefore, the MU must synchronize the accesses from one side to the
+ other. The MU accomplishes synchronization using two sets of matching
+ registers (Processor A-facing, Processor B-facing).
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx6sx-mu
+ - const: fsl,imx7ulp-mu
+ - const: fsl,imx8-mu-scu
+ - items:
+ - enum:
+ - fsl,imx7s-mu
+ - fsl,imx8mq-mu
+ - fsl,imx8mm-mu
+ - fsl,imx8mn-mu
+ - fsl,imx8mp-mu
+ - fsl,imx8qxp-mu
+ - const: fsl,imx6sx-mu
+ - description: To communicate with i.MX8 SCU with fast IPC
+ items:
+ - const: fsl,imx8qxp-mu
+ - const: fsl,imx8-mu-scu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#mbox-cells":
+ description: |
+ <&phandle type channel>
+ phandle : Label name of controller
+ type : Channel type
+ channel : Channel number
+
+ This MU support 4 type of unidirectional channels, each type
+ has 4 channels. A total of 16 channels. Following types are
+ supported:
+ 0 - TX channel with 32bit transmit register and IRQ transmit
+ acknowledgment support.
+ 1 - RX channel with 32bit receive register and IRQ support
+ 2 - TX doorbell channel. Without own register and no ACK support.
+ 3 - RX doorbell channel.
+ const: 2
+
+ clocks:
+ maxItems: 1
+
+ fsl,mu-side-b:
+ description: boolean, if present, means it is for side B MU.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mailbox@5d1b0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1b0000 0x10000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
index 5b13d6672996..3b7ab61a144f 100644
--- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
@@ -24,7 +24,7 @@ properties:
maxItems: 1
clocks:
- maxItems: 1
+ maxItems: 1
interrupts:
items:
@@ -49,9 +49,8 @@ properties:
st,proc-id:
description: Processor id using the mailbox (0 or 1)
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
index 8453ee340b9f..09318830db47 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -20,11 +20,11 @@ properties:
- const: allwinner,sun4i-a10-csi1
- const: allwinner,sun7i-a20-csi0
- items:
- - const: allwinner,sun7i-a20-csi1
- - const: allwinner,sun4i-a10-csi1
+ - const: allwinner,sun7i-a20-csi1
+ - const: allwinner,sun4i-a10-csi1
- items:
- - const: allwinner,sun8i-r40-csi0
- - const: allwinner,sun7i-a20-csi0
+ - const: allwinner,sun8i-r40-csi0
+ - const: allwinner,sun7i-a20-csi0
reg:
maxItems: 1
@@ -35,24 +35,24 @@ properties:
clocks:
oneOf:
- items:
- - description: The CSI interface clock
- - description: The CSI DRAM clock
+ - description: The CSI interface clock
+ - description: The CSI DRAM clock
- items:
- - description: The CSI interface clock
- - description: The CSI ISP clock
- - description: The CSI DRAM clock
+ - description: The CSI interface clock
+ - description: The CSI ISP clock
+ - description: The CSI DRAM clock
clock-names:
oneOf:
- items:
- - const: bus
- - const: ram
+ - const: bus
+ - const: ram
- items:
- - const: bus
- - const: isp
- - const: ram
+ - const: bus
+ - const: isp
+ - const: ram
resets:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 37d77e065491..b902495d278b 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -29,14 +29,14 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - amlogic,gxbb-vdec # GXBB (S905)
- - amlogic,gxl-vdec # GXL (S905X, S905D)
- - amlogic,gxm-vdec # GXM (S912)
- - const: amlogic,gx-vdec
+ - enum:
+ - amlogic,gxbb-vdec # GXBB (S905)
+ - amlogic,gxl-vdec # GXL (S905X, S905D)
+ - amlogic,gxm-vdec # GXM (S912)
+ - const: amlogic,gx-vdec
- enum:
- - amlogic,g12a-vdec # G12A (S905X2, S905D2)
- - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
+ - amlogic,g12a-vdec # G12A (S905X2, S905D2)
+ - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
interrupts:
minItems: 2
@@ -77,13 +77,11 @@ properties:
amlogic,ao-sysctrl:
description: should point to the AOBUS sysctrl node
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
amlogic,canvas:
description: should point to a canvas provider node
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
allOf:
- if:
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
index 95ffa8bc0533..d93aea6a0258 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
@@ -35,8 +35,7 @@ properties:
hdmi-phandle:
description: phandle to the HDMI controller
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
allOf:
- if:
@@ -88,7 +87,7 @@ examples:
- |
cec_AO: cec@100 {
compatible = "amlogic,meson-gx-ao-cec";
- reg = <0x0 0x00100 0x0 0x14>;
+ reg = <0x00100 0x14>;
interrupts = <199>;
clocks = <&clkc_cec>;
clock-names = "core";
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
index 32d6b693274f..dfc4d29a4f04 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -67,8 +67,7 @@ properties:
otherwise it's continuous.
link-frequencies:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint64-array
+ $ref: /schemas/types.yaml#/definitions/uint64-array
description:
Allowed data bus frequencies.
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
deleted file mode 100644
index 7ec2c8c8a3b9..000000000000
--- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Marvell MMP2 camera host interface
-
-Required properties:
- - compatible: Should be "marvell,mmp2-ccic".
- - reg: Register base and size.
- - interrupts: The interrupt number.
- - #clock-cells: Must be 0.
-
-Optional properties:
- - clocks: Reference to the input clock as specified by
- Documentation/devicetree/bindings/clock/clock-bindings.txt.
- - clock-names: Names of the clocks used; "axi" for the AXI bus interface,
- "func" for the peripheral clock and "phy" for the parallel
- video bus interface.
- - clock-output-names: Optional clock source for sensors. Shall be "mclk".
-
-Required subnodes:
- - port: The parallel bus interface port with a single endpoint linked to
- the sensor's endpoint as described in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Required endpoint properties:
- - bus-type: data bus type, <5> or <6> for Parallel or Bt.656 respectively
- - pclk-sample: pixel clock polarity
- - hsync-active: horizontal synchronization polarity (only required for
- parallel bus)
- - vsync-active: vertical synchronization polarity (only required for
- parallel bus)
-
-Example:
-
- camera0: camera@d420a000 {
- compatible = "marvell,mmp2-ccic";
- reg = <0xd420a000 0x800>;
- interrupts = <42>;
- clocks = <&soc_clocks MMP2_CLK_CCIC0>;
- clock-names = "axi";
- #clock-cells = <0>;
- clock-output-names = "mclk";
-
- port {
- camera0_0: endpoint {
- remote-endpoint = <&ov7670_0>;
- bus-type = <5>; /* Parallel */
- hsync-active = <1>; /* Active high */
- vsync-active = <1>; /* Active high */
- pclk-sample = <0>; /* Falling */
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
new file mode 100644
index 000000000000..49bff738aca5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/marvell,mmp2-ccic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 camera host interface bindings
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+ $nodename:
+ pattern: '^camera@[a-f0-9]+$'
+
+ compatible:
+ const: marvell,mmp2-ccic
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ port:
+ type: object
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ # Properties described in
+ # Documentation/devicetree/bindings/media/video-interfaces.txt
+ properties:
+ remote-endpoint: true
+ hsync-active: true
+ vsync-active: true
+ pclk-sample: true
+ bus-type: true
+
+ required:
+ - remote-endpoint
+
+ required:
+ - endpoint
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: AXI bus interface clock
+ - description: Peripheral clock
+ - description: Parallel video bus interface clock
+
+ clock-names:
+ const: axi
+
+ '#clock-cells':
+ const: 0
+
+ clock-output-names:
+ const: mclk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/marvell,mmp2.h>
+
+ camera@d420a000 {
+ compatible = "marvell,mmp2-ccic";
+ reg = <0xd420a000 0x800>;
+ interrupts = <42>;
+ clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+ clock-names = "axi";
+ #clock-cells = <0>;
+ clock-output-names = "mclk";
+
+ port {
+ camera0_0: endpoint {
+ remote-endpoint = <&ov7670_0>;
+ bus-type = <5>; /* Parallel */
+ hsync-active = <1>; /* Active high */
+ vsync-active = <1>; /* Active high */
+ pclk-sample = <0>; /* Falling */
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
index 764affa4877e..55f2d67ae34e 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
@@ -115,7 +115,7 @@ examples:
venus: video-codec@aa00000 {
compatible = "qcom,sc7180-venus";
- reg = <0 0x0aa00000 0 0xff000>;
+ reg = <0x0aa00000 0xff000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc VENUS_GDSC>,
<&videocc VCODEC0_GDSC>;
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
index 8552f4ab907e..157dff8057e9 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
@@ -110,7 +110,7 @@ examples:
video-codec@aa00000 {
compatible = "qcom,sdm845-venus-v2";
- reg = <0 0x0aa00000 0 0xff000>;
+ reg = <0x0aa00000 0xff000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&videocc VIDEO_CC_VENUS_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
index 05cabe4e893a..084e45e2df62 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
@@ -127,7 +127,7 @@ examples:
video-codec@aa00000 {
compatible = "qcom,sdm845-venus";
- reg = <0 0x0aa00000 0 0xff000>;
+ reg = <0x0aa00000 0xff000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&videocc VIDEO_CC_VENUS_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
index b27c9385d490..ded2ac43237d 100644
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -18,136 +18,135 @@ properties:
description:
Specifies the scancode/key mapping table defined in-kernel for
the remote controller.
- allOf:
- - $ref: '/schemas/types.yaml#/definitions/string'
- - enum:
- - rc-adstech-dvb-t-pci
- - rc-alink-dtu-m
- - rc-anysee
- - rc-apac-viewcomp
- - rc-astrometa-t2hybrid
- - rc-asus-pc39
- - rc-asus-ps3-100
- - rc-ati-tv-wonder-hd-600
- - rc-ati-x10
- - rc-avermedia
- - rc-avermedia-a16d
- - rc-avermedia-cardbus
- - rc-avermedia-dvbt
- - rc-avermedia-m135a
- - rc-avermedia-m733a-rm-k6
- - rc-avermedia-rm-ks
- - rc-avertv-303
- - rc-azurewave-ad-tu700
- - rc-beelink-gs1
- - rc-behold
- - rc-behold-columbus
- - rc-budget-ci-old
- - rc-cec
- - rc-cinergy
- - rc-cinergy-1400
- - rc-d680-dmb
- - rc-delock-61959
- - rc-dib0700-nec
- - rc-dib0700-rc5
- - rc-digitalnow-tinytwin
- - rc-digittrade
- - rc-dm1105-nec
- - rc-dntv-live-dvb-t
- - rc-dntv-live-dvbt-pro
- - rc-dtt200u
- - rc-dvbsky
- - rc-dvico-mce
- - rc-dvico-portable
- - rc-em-terratec
- - rc-empty
- - rc-encore-enltv
- - rc-encore-enltv-fm53
- - rc-encore-enltv2
- - rc-evga-indtube
- - rc-eztv
- - rc-flydvb
- - rc-flyvideo
- - rc-fusionhdtv-mce
- - rc-gadmei-rm008z
- - rc-geekbox
- - rc-genius-tvgo-a11mce
- - rc-gotview7135
- - rc-hauppauge
- - rc-hisi-poplar
- - rc-hisi-tv-demo
- - rc-imon-mce
- - rc-imon-pad
- - rc-imon-rsc
- - rc-iodata-bctv7e
- - rc-it913x-v1
- - rc-it913x-v2
- - rc-kaiomy
- - rc-khadas
- - rc-kworld-315u
- - rc-kworld-pc150u
- - rc-kworld-plus-tv-analog
- - rc-leadtek-y04g0051
- - rc-lme2510
- - rc-manli
- - rc-medion-x10
- - rc-medion-x10-digitainer
- - rc-medion-x10-or2x
- - rc-msi-digivox-ii
- - rc-msi-digivox-iii
- - rc-msi-tvanywhere
- - rc-msi-tvanywhere-plus
- - rc-nebula
- - rc-nec-terratec-cinergy-xs
- - rc-norwood
- - rc-npgtech
- - rc-odroid
- - rc-pctv-sedna
- - rc-pinnacle-color
- - rc-pinnacle-grey
- - rc-pinnacle-pctv-hd
- - rc-pixelview
- - rc-pixelview-002t
- - rc-pixelview-mk12
- - rc-pixelview-new
- - rc-powercolor-real-angel
- - rc-proteus-2309
- - rc-purpletv
- - rc-pv951
- - rc-rc5-tv
- - rc-rc6-mce
- - rc-real-audio-220-32-keys
- - rc-reddo
- - rc-snapstream-firefly
- - rc-streamzap
- - rc-su3000
- - rc-tango
- - rc-tanix-tx3mini
- - rc-tanix-tx5max
- - rc-tbs-nec
- - rc-technisat-ts35
- - rc-technisat-usb2
- - rc-terratec-cinergy-c-pci
- - rc-terratec-cinergy-s2-hd
- - rc-terratec-cinergy-xs
- - rc-terratec-slim
- - rc-terratec-slim-2
- - rc-tevii-nec
- - rc-tivo
- - rc-total-media-in-hand
- - rc-total-media-in-hand-02
- - rc-trekstor
- - rc-tt-1500
- - rc-twinhan-dtv-cab-ci
- - rc-twinhan1027
- - rc-videomate-k100
- - rc-videomate-s350
- - rc-videomate-tv-pvr
- - rc-videostrong-kii-pro
- - rc-wetek-hub
- - rc-wetek-play2
- - rc-winfast
- - rc-winfast-usbii-deluxe
- - rc-x96max
- - rc-xbox-dvd
- - rc-zx-irdec
+ $ref: '/schemas/types.yaml#/definitions/string'
+ enum:
+ - rc-adstech-dvb-t-pci
+ - rc-alink-dtu-m
+ - rc-anysee
+ - rc-apac-viewcomp
+ - rc-astrometa-t2hybrid
+ - rc-asus-pc39
+ - rc-asus-ps3-100
+ - rc-ati-tv-wonder-hd-600
+ - rc-ati-x10
+ - rc-avermedia
+ - rc-avermedia-a16d
+ - rc-avermedia-cardbus
+ - rc-avermedia-dvbt
+ - rc-avermedia-m135a
+ - rc-avermedia-m733a-rm-k6
+ - rc-avermedia-rm-ks
+ - rc-avertv-303
+ - rc-azurewave-ad-tu700
+ - rc-beelink-gs1
+ - rc-behold
+ - rc-behold-columbus
+ - rc-budget-ci-old
+ - rc-cec
+ - rc-cinergy
+ - rc-cinergy-1400
+ - rc-d680-dmb
+ - rc-delock-61959
+ - rc-dib0700-nec
+ - rc-dib0700-rc5
+ - rc-digitalnow-tinytwin
+ - rc-digittrade
+ - rc-dm1105-nec
+ - rc-dntv-live-dvb-t
+ - rc-dntv-live-dvbt-pro
+ - rc-dtt200u
+ - rc-dvbsky
+ - rc-dvico-mce
+ - rc-dvico-portable
+ - rc-em-terratec
+ - rc-empty
+ - rc-encore-enltv
+ - rc-encore-enltv-fm53
+ - rc-encore-enltv2
+ - rc-evga-indtube
+ - rc-eztv
+ - rc-flydvb
+ - rc-flyvideo
+ - rc-fusionhdtv-mce
+ - rc-gadmei-rm008z
+ - rc-geekbox
+ - rc-genius-tvgo-a11mce
+ - rc-gotview7135
+ - rc-hauppauge
+ - rc-hisi-poplar
+ - rc-hisi-tv-demo
+ - rc-imon-mce
+ - rc-imon-pad
+ - rc-imon-rsc
+ - rc-iodata-bctv7e
+ - rc-it913x-v1
+ - rc-it913x-v2
+ - rc-kaiomy
+ - rc-khadas
+ - rc-kworld-315u
+ - rc-kworld-pc150u
+ - rc-kworld-plus-tv-analog
+ - rc-leadtek-y04g0051
+ - rc-lme2510
+ - rc-manli
+ - rc-medion-x10
+ - rc-medion-x10-digitainer
+ - rc-medion-x10-or2x
+ - rc-msi-digivox-ii
+ - rc-msi-digivox-iii
+ - rc-msi-tvanywhere
+ - rc-msi-tvanywhere-plus
+ - rc-nebula
+ - rc-nec-terratec-cinergy-xs
+ - rc-norwood
+ - rc-npgtech
+ - rc-odroid
+ - rc-pctv-sedna
+ - rc-pinnacle-color
+ - rc-pinnacle-grey
+ - rc-pinnacle-pctv-hd
+ - rc-pixelview
+ - rc-pixelview-002t
+ - rc-pixelview-mk12
+ - rc-pixelview-new
+ - rc-powercolor-real-angel
+ - rc-proteus-2309
+ - rc-purpletv
+ - rc-pv951
+ - rc-rc5-tv
+ - rc-rc6-mce
+ - rc-real-audio-220-32-keys
+ - rc-reddo
+ - rc-snapstream-firefly
+ - rc-streamzap
+ - rc-su3000
+ - rc-tango
+ - rc-tanix-tx3mini
+ - rc-tanix-tx5max
+ - rc-tbs-nec
+ - rc-technisat-ts35
+ - rc-technisat-usb2
+ - rc-terratec-cinergy-c-pci
+ - rc-terratec-cinergy-s2-hd
+ - rc-terratec-cinergy-xs
+ - rc-terratec-slim
+ - rc-terratec-slim-2
+ - rc-tevii-nec
+ - rc-tivo
+ - rc-total-media-in-hand
+ - rc-total-media-in-hand-02
+ - rc-trekstor
+ - rc-tt-1500
+ - rc-twinhan-dtv-cab-ci
+ - rc-twinhan1027
+ - rc-videomate-k100
+ - rc-videomate-s350
+ - rc-videomate-tv-pvr
+ - rc-videostrong-kii-pro
+ - rc-wetek-hub
+ - rc-wetek-play2
+ - rc-winfast
+ - rc-winfast-usbii-deluxe
+ - rc-x96max
+ - rc-xbox-dvd
+ - rc-zx-irdec
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index fcb5f13704a5..c7e1e4fe67e6 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -27,28 +27,34 @@ properties:
interrupts:
maxItems: 1
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
port:
type: object
additionalProperties: false
properties:
- endpoint:
- type: object
- additionalProperties: false
+ endpoint:
+ type: object
+ additionalProperties: false
# Properties described in
# Documentation/devicetree/bindings/media/video-interfaces.txt
- properties:
- remote-endpoint: true
- hsync-active: true
- vsync-active: true
- field-even-active: false
- bus-width:
- enum: [8, 16]
- default: 8
-
- required:
- - remote-endpoint
+ properties:
+ remote-endpoint: true
+ hsync-active: true
+ vsync-active: true
+ field-even-active: false
+ bus-width:
+ enum: [8, 16]
+ default: 8
+
+ required:
+ - remote-endpoint
required:
- endpoint
@@ -57,6 +63,8 @@ required:
- compatible
- reg
- interrupts
+ - clocks
+ - power-domains
- port
additionalProperties: false
@@ -64,11 +72,14 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/r7s72100-clock.h>
ceu: ceu@e8210000 {
reg = <0xe8210000 0x209c>;
compatible = "renesas,r7s72100-ceu";
interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp6_clks R7S72100_CLK_CEU>;
+ power-domains = <&cpg_clocks>;
port {
ceu_in: endpoint {
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index 408442a0c389..c9e068231d4b 100644
--- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -135,7 +135,7 @@ examples:
csi20: csi2@fea80000 {
compatible = "renesas,r8a7796-csi2";
- reg = <0 0xfea80000 0 0x10000>;
+ reg = <0xfea80000 0x10000>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 714>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index 1ec947b4781f..53c0a7238bac 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -116,10 +116,9 @@ properties:
#The per-board settings for Gen3 and RZ/G2 platforms:
renesas,id:
description: VIN channel number
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 15
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
ports:
type: object
@@ -261,13 +260,13 @@ properties:
anyOf:
- required:
- - endpoint@0
+ - endpoint@0
- required:
- - endpoint@1
+ - endpoint@1
- required:
- - endpoint@2
+ - endpoint@2
- required:
- - endpoint@3
+ - endpoint@3
additionalProperties: false
@@ -307,7 +306,7 @@ examples:
vin1: vin@e6ef1000 {
compatible = "renesas,vin-r8a7790",
"renesas,rcar-gen2-vin";
- reg = <0 0xe6ef1000 0 0x1000>;
+ reg = <0xe6ef1000 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -329,7 +328,7 @@ examples:
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7795";
- reg = <0 0xe6ef0000 0 0x1000>;
+ reg = <0xe6ef0000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -366,7 +365,7 @@ examples:
vin2: video@e6ef2000 {
compatible = "renesas,vin-r8a77970";
- reg = <0 0xe6ef2000 0 0x1000>;
+ reg = <0xe6ef2000 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml
index f3a8a350e85f..ef473f287399 100644
--- a/Documentation/devicetree/bindings/media/ti,vpe.yaml
+++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml
@@ -17,7 +17,7 @@ description: |-
properties:
compatible:
- const: ti,dra7-vpe
+ const: ti,dra7-vpe
reg:
items:
diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt
deleted file mode 100644
index 049675944b78..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Calxeda DDR memory controller
-
-Properties:
-- compatible : Should be:
- - "calxeda,hb-ddr-ctrl" for ECX-1000
- - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
-- reg : Address and size for DDR controller registers.
-- interrupts : Interrupt for DDR controller.
-
-Example:
-
- memory-controller@fff00000 {
- compatible = "calxeda,hb-ddr-ctrl";
- reg = <0xfff00000 0x1000>;
- interrupts = <0 91 4>;
- };
diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
new file mode 100644
index 000000000000..96d563fd61f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/calxeda-ddr-ctrlr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda DDR memory controller binding
+
+description: |
+ The Calxeda DDR memory controller is initialised and programmed by the
+ firmware, but an OS might want to read its registers for error reporting
+ purposes and to learn about the DRAM topology.
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+ compatible:
+ enum:
+ - calxeda,hb-ddr-ctrl
+ - calxeda,ecx-2000-ddr-ctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ memory-controller@fff00000 {
+ compatible = "calxeda,hb-ddr-ctrl";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 91 4>;
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
index cdfe3f7f0ea9..637e24f0f73b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
@@ -51,9 +51,7 @@ patternProperties:
maxItems: 1
reg-io-width:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 2]
+ enum: [1, 2]
description:
Data width in bytes (1 or 2). If omitted, default of 1 is used.
@@ -64,11 +62,10 @@ patternProperties:
type: boolean
samsung,srom-timing:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- minItems: 6
- maxItems: 6
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minItems: 6
+ maxItems: 6
description: |
Array of 6 integers, specifying bank timings in the following order:
Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
index c9e6c22cb5be..445e46feda69 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -25,9 +25,9 @@ properties:
compatible:
items:
- enum:
- - fsl,imx8mn-ddrc
- - fsl,imx8mm-ddrc
- - fsl,imx8mq-ddrc
+ - fsl,imx8mn-ddrc
+ - fsl,imx8mm-ddrc
+ - fsl,imx8mq-ddrc
- const: fsl,imx8m-ddrc
reg:
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt b/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
deleted file mode 100644
index 59b8dcc118ee..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* Ingenic JZ4780 NAND/external memory controller (NEMC)
-
-This file documents the device tree bindings for the NEMC external memory
-controller in Ingenic JZ4780
-
-Required properties:
-- compatible: Should be set to one of:
- "ingenic,jz4740-nemc" (JZ4740)
- "ingenic,jz4780-nemc" (JZ4780)
-- reg: Should specify the NEMC controller registers location and length.
-- clocks: Clock for the NEMC controller.
-- #address-cells: Must be set to 2.
-- #size-cells: Must be set to 1.
-- ranges: A set of ranges for each bank describing the physical memory layout.
- Each should specify the following 4 integer values:
-
- <cs number> 0 <physical address of mapping> <size of mapping>
-
-Each child of the NEMC node describes a device connected to the NEMC.
-
-Required child node properties:
-- reg: Should contain at least one register specifier, given in the following
- format:
-
- <cs number> <offset> <size>
-
- Multiple registers can be specified across multiple banks. This is needed,
- for example, for packaged NAND devices with multiple dies. Such devices
- should be grouped into a single node.
-
-Optional child node properties:
-- ingenic,nemc-bus-width: Specifies the bus width in bits. Defaults to 8 bits.
-- ingenic,nemc-tAS: Address setup time in nanoseconds.
-- ingenic,nemc-tAH: Address hold time in nanoseconds.
-- ingenic,nemc-tBP: Burst pitch time in nanoseconds.
-- ingenic,nemc-tAW: Access wait time in nanoseconds.
-- ingenic,nemc-tSTRV: Static memory recovery time in nanoseconds.
-
-If a child node references multiple banks in its "reg" property, the same value
-for all optional parameters will be configured for all banks. If any optional
-parameters are omitted, they will be left unchanged from whatever they are
-configured to when the NEMC device is probed (which may be the reset value as
-given in the hardware reference manual, or a value configured by the boot
-loader).
-
-Example (NEMC node with a NAND child device attached at CS1):
-
-nemc: nemc@13410000 {
- compatible = "ingenic,jz4780-nemc";
- reg = <0x13410000 0x10000>;
-
- #address-cells = <2>;
- #size-cells = <1>;
-
- ranges = <1 0 0x1b000000 0x1000000
- 2 0 0x1a000000 0x1000000
- 3 0 0x19000000 0x1000000
- 4 0 0x18000000 0x1000000
- 5 0 0x17000000 0x1000000
- 6 0 0x16000000 0x1000000>;
-
- clocks = <&cgu JZ4780_CLK_NEMC>;
-
- nand: nand@1 {
- compatible = "ingenic,jz4780-nand";
- reg = <1 0 0x1000000>;
-
- ingenic,nemc-tAS = <10>;
- ingenic,nemc-tAH = <5>;
- ingenic,nemc-tBP = <10>;
- ingenic,nemc-tAW = <15>;
- ingenic,nemc-tSTRV = <100>;
-
- ...
- };
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
new file mode 100644
index 000000000000..9b478da0c479
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ $nodename:
+ pattern: "^memory-controller@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-nemc
+ - ingenic,jz4780-nemc
+ - items:
+ - const: ingenic,jz4725b-nemc
+ - const: ingenic,jz4740-nemc
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+patternProperties:
+ ".*@[0-9]+$":
+ type: object
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 255
+
+ ingenic,nemc-bus-width:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [8, 16]
+ description: Specifies the bus width in bits.
+
+ ingenic,nemc-tAS:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Address setup time in nanoseconds.
+
+ ingenic,nemc-tAH:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Address hold time in nanoseconds.
+
+ ingenic,nemc-tBP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Burst pitch time in nanoseconds.
+
+ ingenic,nemc-tAW:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Address wait time in nanoseconds.
+
+ ingenic,nemc-tSTRV:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Static memory recovery time in nanoseconds.
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ #include <dt-bindings/gpio/gpio.h>
+ nemc: memory-controller@13410000 {
+ compatible = "ingenic,jz4780-nemc";
+ reg = <0x13410000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
+
+ clocks = <&cgu JZ4780_CLK_NEMC>;
+
+ ethernet@6 {
+ compatible = "davicom,dm9000";
+ davicom,no-eeprom;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc_cs6>;
+
+ reg = <6 0 1>, /* addr */
+ <6 2 1>; /* data */
+
+ ingenic,nemc-tAS = <15>;
+ ingenic,nemc-tAH = <10>;
+ ingenic,nemc-tBP = <20>;
+ ingenic,nemc-tAW = <50>;
+ ingenic,nemc-tSTRV = <100>;
+
+ reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&eth0_power>;
+
+ interrupt-parent = <&gpe>;
+ interrupts = <19 4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
index 3e0a8a92d652..278549f9e051 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
@@ -73,10 +73,9 @@ patternProperties:
timings
nvidia,emc-auto-cal-interval:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description:
pad calibration interval in microseconds
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 2097151
@@ -136,11 +135,10 @@ patternProperties:
value of the EMC_XM2DQSPADCTRL2 register for this set of timings
nvidia,emc-zcal-cnt-long:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description:
number of EMC clocks to wait before issuing any commands after
clock change
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1023
@@ -150,12 +148,11 @@ patternProperties:
value of the EMC_ZCAL_INTERVAL register for this set of timings
nvidia,emc-configuration:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
description:
EMC timing characterization data. These are the registers (see
section "15.6.2 EMC Registers" in the TRM) whose values need to
be specified, according to the board documentation.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
items:
- description: EMC_RC
- description: EMC_RFC
@@ -340,7 +337,7 @@ examples:
mc: memory-controller@70019000 {
compatible = "nvidia,tegra124-mc";
- reg = <0x0 0x70019000 0x0 0x1000>;
+ reg = <0x70019000 0x1000>;
clocks = <&tegra_car TEGRA124_CLK_MC>;
clock-names = "mc";
@@ -352,7 +349,7 @@ examples:
external-memory-controller@7001b000 {
compatible = "nvidia,tegra124-emc";
- reg = <0x0 0x7001b000 0x0 0x1000>;
+ reg = <0x7001b000 0x1000>;
clocks = <&car TEGRA124_CLK_EMC>;
clock-names = "emc";
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
index 22a94b6fdbde..84d0339505b1 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
@@ -60,8 +60,7 @@ patternProperties:
maximum: 1066000000
nvidia,emem-configuration:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
description: |
Values to be written to the EMEM register block. See section
"15.6.1 MC Registers" in the TRM.
@@ -112,7 +111,7 @@ examples:
- |
memory-controller@70019000 {
compatible = "nvidia,tegra124-mc";
- reg = <0x0 0x70019000 0x0 0x1000>;
+ reg = <0x70019000 0x1000>;
clocks = <&tegra_car 32>;
clock-names = "mc";
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
index e4135bac6957..112bae2fcbbd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
@@ -56,10 +56,9 @@ patternProperties:
maximum: 900000000
nvidia,emc-auto-cal-interval:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description:
Pad calibration interval in microseconds.
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 2097151
@@ -79,11 +78,10 @@ patternProperties:
Mode Register 0.
nvidia,emc-zcal-cnt-long:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description:
Number of EMC clocks to wait before issuing any commands after
sending ZCAL_MRW_CMD.
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1023
@@ -98,12 +96,11 @@ patternProperties:
FBIO "read" FIFO periodic resetting enabled.
nvidia,emc-configuration:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
description:
EMC timing characterization data. These are the registers
(see section "18.13.2 EMC Registers" in the TRM) whose values
need to be specified, according to the board documentation.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
items:
- description: EMC_RC
- description: EMC_RFC
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
index 4b9196c83291..84fd57bcf0dc 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
@@ -77,8 +77,7 @@ patternProperties:
maximum: 900000000
nvidia,emem-configuration:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
description: |
Values to be written to the EMEM register block. See section
"18.13.1 MC Registers" in the TRM.
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt
deleted file mode 100644
index 9f78e6c82740..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-DT bindings for Renesas R-Mobile and SH-Mobile memory controllers
-=================================================================
-
-Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers.
-These memory controllers differ from one SoC variant to another, and are called
-by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
-(DBSC3)", "SDRAM Bus State Controller (SBSC)").
-
-Currently memory controller device nodes are used only to reference PM
-domains, and prevent these PM domains from being powered down, which would
-crash the system.
-
-As there exist no actual drivers for these controllers yet, these bindings
-should be considered EXPERIMENTAL for now.
-
-Required properties:
- - compatible: Must be one of the following SoC-specific values:
- - "renesas,dbsc-r8a73a4" (R-Mobile APE6)
- - "renesas,dbsc3-r8a7740" (R-Mobile A1)
- - "renesas,sbsc-sh73a0" (SH-Mobile AG5)
- - reg: Must contain the base address and length of the memory controller's
- registers.
-
-Optional properties:
- - interrupts: Must contain a list of interrupt specifiers for memory
- controller interrupts, if available.
- - interrupt-names: Must contain a list of interrupt names corresponding to
- the interrupts in the interrupts property, if available.
- Valid interrupt names are:
- - "sec" (secure interrupt)
- - "temp" (normal (temperature) interrupt)
- - power-domains: Must contain a reference to the PM domain that the memory
- controller belongs to, if available.
-
-Example:
-
- sbsc1: memory-controller@fe400000 {
- compatible = "renesas,sbsc-sh73a0";
- reg = <0xfe400000 0x400>;
- interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 36 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "sec", "temp";
- power-domains = <&pd_a4bc0>;
- };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
new file mode 100644
index 000000000000..7056ccb7eb30
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas DDR Bus Controllers
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+ Renesas SoCs contain one or more memory controllers. These memory
+ controllers differ from one SoC variant to another, and are called by
+ different names, e.g. "DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
+ (DBSC3)", or "SDRAM Bus State Controller (SBSC)").
+
+properties:
+ compatible:
+ enum:
+ - renesas,dbsc-r8a73a4 # R-Mobile APE6
+ - renesas,dbsc3-r8a7740 # R-Mobile A1
+ - renesas,sbsc-sh73a0 # SH-Mobile AG5
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: sec # secure interrupt
+ - const: temp # normal (temperature) interrupt
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ sbsc1: memory-controller@fe400000 {
+ compatible = "renesas,sbsc-sh73a0";
+ reg = <0xfe400000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sec", "temp";
+ power-domains = <&pd_a4bc0>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
index 39afacc447b2..f591332fc462 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
@@ -31,19 +31,19 @@ properties:
description: A touchscreen is attached to the controller
allwinner,tp-sensitive-adjust:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 15
- default: 15
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 15
+
description: Sensitivity of pen down detection
allwinner,filter-type:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 3
- default: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
+ default: 1
+
description: |
Select median and averaging filter. Sample used for median /
averaging filter:
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
deleted file mode 100644
index 148ef621a5e5..000000000000
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-Required properties:
-
- - compatible : One of the following chip-specific strings:
- "cirrus,cs47l24"
- "wlf,wm5102"
- "wlf,wm5110"
- "wlf,wm8280"
- "wlf,wm8997"
- "wlf,wm8998"
- "wlf,wm1814"
- "wlf,wm1831"
-
- - reg : I2C slave address when connected using I2C, chip select number when
- using SPI.
-
- - interrupts : The interrupt line the /IRQ signal for the device is
- connected to.
- - interrupt-controller : Arizona class devices contain interrupt controllers
- and may provide interrupt services to other devices.
- - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
- The first cell is the IRQ number.
- The second cell is the flags, encoded as the trigger masks from
- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
- - gpio-controller : Indicates this device is a GPIO controller.
- - #gpio-cells : Must be 2. The first cell is the pin number and the
- second cell is used to specify optional parameters, see ../gpio/gpio.txt
- for details.
-
- - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
- as covered in Documentation/devicetree/bindings/regulator/regulator.txt
-
- - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
- wm5110, wm8280, wm8998, wm1814)
-
- - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
- wm5110, wm8280, wm8998, wm1814)
-
- - SPKVDD-supply : Speaker driver power supply (wm8997)
-
- - DCVDD-supply : Main power supply (cs47l24, wm1831)
-
- - MICVDD-supply : Microphone power supply (cs47l24, wm1831)
-
-Optional properties:
-
- - reset-gpios : GPIO specifier for the GPIO controlling /RESET
-
- - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
- - clock-names: Should contains two strings:
- "mclk1" for the clock supplied on MCLK1, recommended to be a high
- quality audio reference clock
- "mclk2" for the clock supplied on MCLK2, recommended to be an always on
- 32k clock
-
- - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
- for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
- absent, no configuration of these registers is performed. If any entry has
- a value that is out of range for a 16 bit register then the chip default
- will be used. If present exactly five values must be specified.
-
- - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
- they are being externally supplied. As covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
- (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
-
-Deprecated properties:
-
- - wlf,reset : GPIO specifier for the GPIO controlling /RESET
-
-Also see child specific device properties:
- Regulator - ../regulator/arizona-regulator.txt
- Extcon - ../extcon/extcon-arizona.txt
- Sound - ../sound/wlf,arizona.txt
-
-Example:
-
-codec: wm5102@1a {
- compatible = "wlf,wm5102";
- reg = <0x1a>;
- interrupts = <347>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- wlf,gpio-defaults = <
- ARIZONA_GP_FN_TXLRCLK
- ARIZONA_GP_DEFAULT
- ARIZONA_GP_DEFAULT
- ARIZONA_GP_DEFAULT
- ARIZONA_GP_DEFAULT
- >;
-};
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
deleted file mode 100644
index 3bf92ad37fa1..000000000000
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-Also see these documents for generic binding information:
- [1] GPIO : ../gpio/gpio.txt
-
-And these for relevant defines:
- [2] include/dt-bindings/pinctrl/lochnagar.h
- [3] include/dt-bindings/clock/lochnagar.h
-
-And these documents for the required sub-node binding details:
- [4] Clock: ../clock/cirrus,lochnagar.txt
- [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
- [6] Regulator: ../regulator/cirrus,lochnagar.txt
- [7] Sound: ../sound/cirrus,lochnagar.txt
- [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt
-
-Required properties:
-
- - compatible : One of the following strings:
- "cirrus,lochnagar1"
- "cirrus,lochnagar2"
-
- - reg : I2C slave address
-
- - reset-gpios : Reset line to the Lochnagar, see [1].
-
-Required sub-nodes:
-
- - lochnagar-clk : Binding for the clocking components, see [4].
-
- - lochnagar-pinctrl : Binding for the pin control components, see [5].
-
-Optional sub-nodes:
-
- - Bindings for the regulator components, see [6]. Only available on
- Lochnagar 2.
-
- - lochnagar-sc : Binding for the sound card components, see [7].
- Only available on Lochnagar 2.
- - lochnagar-hwmon : Binding for the hardware monitor components, see [8].
- Only available on Lochnagar 2.
-
-Optional properties:
-
- - present-gpios : Host present line, indicating the presence of a
- host system, see [1]. This can be omitted if the present line is
- tied in hardware.
-
-Example:
-
-lochnagar: lochnagar@22 {
- compatible = "cirrus,lochnagar2";
- reg = <0x22>;
-
- reset-gpios = <&gpio0 55 0>;
- present-gpios = <&gpio0 60 0>;
-
- lochnagar-clk {
- compatible = "cirrus,lochnagar2-clk";
- ...
- };
-
- lochnagar-pinctrl {
- compatible = "cirrus,lochnagar-pinctrl";
- ...
- };
-
- lochnagar-sc {
- compatible = "cirrus,lochnagar2-soundcard";
- ...
- };
-
- lochnagar-hwmon {
- compatible = "cirrus,lochnagar2-hwmon";
- ...
- };
-};
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..7a616577ac63
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -0,0 +1,352 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of
+ various application processor systems to provide a full evaluation
+ platform. Audio system topology, clocking and power can all be
+ controlled through the Lochnagar, allowing the device under test
+ to be used in a variety of possible use cases.
+
+ Also see these documents for generic binding information:
+ [1] GPIO : ../gpio/gpio.txt
+
+ And these for relevant defines:
+ [2] include/dt-bindings/pinctrl/lochnagar.h
+ [3] include/dt-bindings/clock/lochnagar.h
+
+ And these documents for the required sub-node binding details:
+ [4] Clock: ../clock/cirrus,lochnagar.yaml
+ [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml
+ [6] Sound: ../sound/cirrus,lochnagar.yaml
+ [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2
+ then:
+ properties:
+ lochnagar-hwmon:
+ type: object
+ $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+ lochnagar-sc:
+ type: object
+ $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar1
+ - cirrus,lochnagar2
+
+ reg:
+ const: 0x22
+
+ reset-gpios:
+ maxItems: 1
+
+ present-gpios:
+ description: |
+ Host present line, indicating the presence of a
+ host system, see [1]. This can be omitted if the present line is
+ tied in hardware.
+ maxItems: 1
+
+ lochnagar-clk:
+ type: object
+ $ref: /schemas/clock/cirrus,lochnagar.yaml#
+
+ lochnagar-pmic32k:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 32768
+
+ lochnagar-clk12m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 12288000
+
+ lochnagar-clk11m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 11298600
+
+ lochnagar-clk24m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 24576000
+
+ lochnagar-clk22m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 22579200
+
+ lochnagar-clk8m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 8192000
+
+ lochnagar-usb24m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 24576000
+
+ lochnagar-usb12m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 12288000
+
+ lochnagar-pinctrl:
+ type: object
+ $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
+
+ VDDCORE:
+ description:
+ Initialisation data for the VDDCORE regulator, which supplies the
+ CODECs digital core if not being provided by an internal regulator.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-vddcore
+
+ SYSVDD-supply:
+ description:
+ Primary power supply for the Lochnagar.
+ required:
+ - compatible
+
+ MICVDD:
+ description:
+ Initialisation data for the MICVDD regulator, which supplies the
+ CODECs MICVDD.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-micvdd
+
+ SYSVDD-supply:
+ description:
+ Primary power supply for the Lochnagar.
+ required:
+ - compatible
+
+ MIC1VDD:
+ description:
+ Initialisation data for the MIC1VDD supplies.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-mic1vdd
+
+ cirrus,micbias-input:
+ description:
+ A property selecting which of the CODEC minicard micbias outputs
+ should be used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 4
+
+ MICBIAS1-supply:
+ description:
+ Regulator supplies for the MIC1VDD outputs, supplying the digital
+ microphones, normally supplied from the attached CODEC.
+ required:
+ - compatible
+
+ MIC2VDD:
+ description:
+ Initialisation data for the MIC2VDD supplies.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-mic2vdd
+
+ cirrus,micbias-input:
+ description:
+ A property selecting which of the CODEC minicard micbias outputs
+ should be used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 4
+
+ MICBIAS2-supply:
+ description:
+ Regulator supplies for the MIC2VDD outputs, supplying the digital
+ microphones, normally supplied from the attached CODEC.
+ required:
+ - compatible
+
+ VDD1V8:
+ description:
+ Recommended fixed regulator for the VDD1V8 regulator, which supplies
+ the CODECs analog and 1.8V digital supplies.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - regulator-fixed
+
+ regulator-min-microvolt:
+ const: 1800000
+
+ regulator-max-microvolt:
+ const: 1800000
+
+ vin-supply:
+ description:
+ Should be set to same supply as SYSVDD
+ required:
+ - compatible
+ - regulator-min-microvolt
+ - regulator-max-microvolt
+ - regulator-boot-on
+ - regulator-always-on
+ - vin-supply
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - lochnagar-clk
+ - lochnagar-pinctrl
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clk/lochnagar.h>
+ #include <dt-bindings/pinctrl/lochnagar.h>
+ i2c@e0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe0004000 0x1000>;
+
+ lochnagar: lochnagar@22 {
+ compatible = "cirrus,lochnagar2";
+ reg = <0x22>;
+
+ reset-gpios = <&gpio0 55 0>;
+ present-gpios = <&gpio0 60 0>;
+
+ lochnagarclk: lochnagar-clk {
+ compatible = "cirrus,lochnagar2-clk";
+
+ #clock-cells = <1>;
+ clocks = <&clkaudio>, <&clkpmic>;
+ clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+ assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>,
+ <&lochnagarclk LOCHNAGAR_CDC_MCLK2>;
+ assigned-clock-parents = <&clkaudio>, <&clkpmic>;
+ };
+
+ clkpmic: lochnagar-pmic32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ lochnagar-pinctrl {
+ compatible = "cirrus,lochnagar-pinctrl";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinsettings>;
+
+ pinsettings: pin-settings {
+ ap2aif-pins {
+ input-enable;
+ groups = "gf-aif1";
+ function = "codec-aif3";
+ };
+ codec2aif-pins {
+ output-enable;
+ groups = "codec-aif3";
+ function = "gf-aif1";
+ };
+ };
+ };
+
+ lochnagar-sc {
+ compatible = "cirrus,lochnagar2-soundcard";
+
+ #sound-dai-cells = <1>;
+
+ clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>;
+ clock-names = "mclk";
+ };
+
+ lochnagar-hwmon {
+ compatible = "cirrus,lochnagar2-hwmon";
+ };
+
+ MIC1VDD {
+ compatible = "cirrus,lochnagar2-mic1vdd";
+
+ cirrus,micbias-input = <3>;
+ };
+
+ MICVDD {
+ compatible = "cirrus,lochnagar2-micvdd";
+
+ SYSVDD-supply = <&wallvdd>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ VDD1V8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDD1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+
+ vin-supply = <&wallvdd>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
new file mode 100644
index 000000000000..a5531f6caf12
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
@@ -0,0 +1,299 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs Multi-Functional Device
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ These devices are audio SoCs with extensive digital capabilities and a range
+ of analogue I/O.
+
+ See also the child driver bindings in:
+
+ bindings/pinctrl/cirrus,madera.yaml
+ bindings/regulator/wlf,arizona.yaml
+ bindings/sound/cirrus,madera.yaml
+
+allOf:
+ - $ref: /schemas/pinctrl/cirrus,madera.yaml#
+ - $ref: /schemas/regulator/wlf,arizona.yaml#
+ - $ref: /schemas/sound/cirrus,madera.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l85
+ - wlf,wm1840
+ then:
+ properties:
+ SPKVDDL-supply:
+ description:
+ Left speaker driver power supply.
+
+ SPKVDDR-supply:
+ description:
+ Right speaker driver power supply.
+
+ required:
+ - SPKVDDL-supply
+ - SPKVDDR-supply
+ else:
+ required:
+ - DCVDD-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l15
+ - cirrus,cs47l35
+ then:
+ properties:
+ SPKVDD-supply:
+ description:
+ Mono speaker driver power supply.
+
+ required:
+ - SPKVDD-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l35
+ - cirrus,cs47l85
+ - cirrus,cs47l90
+ - cirrus,cs47l91
+ - wlf,wm1840
+ then:
+ properties:
+ DBVDD2-supply:
+ description:
+ Databus power supply.
+
+ required:
+ - DBVDD2-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l85
+ - cirrus,cs47l90
+ - cirrus,cs47l91
+ - wlf,wm1840
+ then:
+ properties:
+ DBVDD3-supply:
+ description:
+ Databus power supply.
+
+ DBVDD4-supply:
+ description:
+ Databus power supply.
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l15
+ then:
+ required:
+ - MICVDD-supply
+ else:
+ properties:
+ CPVDD2-supply:
+ description:
+ Secondary charge pump power supply.
+
+ required:
+ - CPVDD2-supply
+
+properties:
+ compatible:
+ enum:
+ - cirrus,cs47l15
+ - cirrus,cs47l35
+ - cirrus,cs47l85
+ - cirrus,cs47l90
+ - cirrus,cs47l91
+ - cirrus,cs42l92
+ - cirrus,cs47l92
+ - cirrus,cs47l93
+ - cirrus,wm1840
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number. The second cell is reserved for
+ future use and must be zero
+ const: 2
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ bindings/interrupt-controller/interrupts.txt
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ One entry specifying the GPIO controlling /RESET. As defined in
+ bindings/gpio.txt. Although optional, it is strongly recommended
+ to use a hardware reset.
+ maxItems: 1
+
+ clocks:
+ description:
+ Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3.
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ description: |
+ May contain up to three strings:
+ "mclk1" For the clock supplied on MCLK1, recommended to be a
+ high quality audio reference clock.
+ "mclk2" For the clock supplied on MCLK2, required to be an
+ always on 32k clock.
+ "mclk3" For the clock supplied on MCLK3.
+ oneOf:
+ - items:
+ - const: mclk1
+ - items:
+ - const: mclk2
+ - items:
+ - const: mclk3
+ - items:
+ - const: mclk1
+ - const: mclk2
+ - items:
+ - const: mclk1
+ - const: mclk3
+ - items:
+ - const: mclk2
+ - const: mclk3
+ - items:
+ - const: mclk1
+ - const: mclk2
+ - const: mclk3
+
+ AVDD-supply:
+ description:
+ Analogue power supply.
+
+ DBVDD1-supply:
+ description:
+ Databus power supply.
+
+ CPVDD1-supply:
+ description:
+ Charge pump power supply.
+
+ DCVDD-supply:
+ description:
+ Digital power supply, optional on CS47L85, WM1840 where it can
+ be supplied internally.
+
+ MICVDD-supply:
+ description:
+ Microphone power supply, normally supplied internally except on
+ cs47l24, wm1831 where it is mandatory.
+
+required:
+ - compatible
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupt-parent
+ - interrupts
+ - AVDD-supply
+ - DBVDD1-supply
+ - CPVDD1-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/madera.h>
+ i2c@e0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe0004000 0x1000>;
+
+ cs47l85: codec@1a {
+ compatible = "cirrus,cs47l85";
+ reg = <0x1a>;
+
+ reset-gpios = <&gpio 0>;
+ wlf,ldoena = <&gpio 1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <&host_irq1>;
+ interrupt-parent = <&gic>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ AVDD-supply = <&vdd1v8>;
+ DBVDD1-supply = <&vdd1v8>;
+ DBVDD2-supply = <&vdd1v8>;
+ DBVDD3-supply = <&vdd1v8>;
+ DBVDD4-supply = <&vdd1v8>;
+ CPVDD1-supply = <&vdd1v8>;
+ CPVDD2-supply = <&vdd1v2>;
+ SPKVDDL-supply = <&vdd5v>;
+ SPKVDDR-supply = <&vdd5v>;
+
+ clocks = <&clks 0>, <&clks 1>, <&clks 2>;
+ clock-names = "mclk1", "mclk2", "mclk3";
+
+ cirrus,dmic-ref = <0 0 MADERA_DMIC_REF_MICBIAS1>;
+ cirrus,inmode = <
+ MADERA_INMODE_SE MADERA_INMODE_SE
+ MADERA_INMODE_SE MADERA_INMODE_SE
+ MADERA_INMODE_DIFF MADERA_INMODE_DIFF
+ >;
+ cirrus,max-channels-clocked = <2 0 0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinsettings>;
+
+ pinsettings: pin-settings {
+ aif1-pins {
+ groups = "aif1";
+ function = "aif1";
+ bias-bus-hold;
+ };
+
+ aif2-pins {
+ groups = "aif2";
+ function = "aif2";
+ bias-bus-hold;
+ };
+
+ aif3-pins {
+ groups = "aif3";
+ function = "aif3";
+ bias-bus-hold;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt
deleted file mode 100644
index 47e2b8bc6051..000000000000
--- a/Documentation/devicetree/bindings/mfd/madera.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Cirrus Logic Madera class audio codecs Multi-Functional Device
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-See also the child driver bindings in:
-bindings/pinctrl/cirrus,madera-pinctrl.txt
-bindings/regulator/arizona-regulator.txt
-bindings/sound/madera.txt
-
-Required properties:
-
- - compatible : One of the following chip-specific strings:
- "cirrus,cs47l15"
- "cirrus,cs47l35"
- "cirrus,cs47l85"
- "cirrus,cs47l90"
- "cirrus,cs47l91"
- "cirrus,cs42l92"
- "cirrus,cs47l92"
- "cirrus,cs47l93"
- "cirrus,wm1840"
-
- - reg : I2C slave address when connected using I2C, chip select number when
- using SPI.
-
- - DCVDD-supply : Power supply for the device as defined in
- bindings/regulator/regulator.txt
- Mandatory on CS47L15, CS47L35, CS47L90, CS47L91, CS42L92, CS47L92, CS47L93
- Optional on CS47L85, WM1840
-
- - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
- Power supplies for the device
-
- - DBVDD3-supply, DBVDD4-supply : Power supplies for the device
- (CS47L85, CS47L90, CS47L91, WM1840)
-
- - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
- (CS47L85, WM1840)
-
- - SPKVDD-supply : Power supply for the device
- (CS47L15, CS47L35)
-
- - interrupt-controller : Indicates that this device is an interrupt controller
-
- - #interrupt-cells: the number of cells to describe an IRQ, must be 2.
- The first cell is the IRQ number.
- The second cell is the flags, encoded as the trigger masks from
- bindings/interrupt-controller/interrupts.txt
-
- - gpio-controller : Indicates this device is a GPIO controller.
-
- - #gpio-cells : Must be 2. The first cell is the pin number. The second cell
- is reserved for future use and must be zero
-
- - interrupt-parent : The parent interrupt controller.
-
- - interrupts : The interrupt line the /IRQ signal for the device is
- connected to.
-
-Optional properties:
-
- - MICVDD-supply : Power supply, only need to be specified if
- powered externally
-
- - reset-gpios : One entry specifying the GPIO controlling /RESET.
- As defined in bindings/gpio.txt.
- Although optional, it is strongly recommended to use a hardware reset
-
- - clocks: Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3
- - clock-names: May contain up to three strings:
- "mclk1" for the clock supplied on MCLK1, recommended to be a high
- quality audio reference clock
- "mclk2" for the clock supplied on MCLK2, required to be an always on
- 32k clock
- "mclk3" for the clock supplied on MCLK3
-
- - MICBIASx : Initial data for the MICBIAS regulators, as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt.
- One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
- (all codecs)
-
- One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
- (all except CS47L85, WM1840)
-
- The following following additional property is supported for the generator
- nodes:
- - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
- capacitors attached.
-
-Optional child nodes:
- micvdd : Node containing initialization data for the micvdd regulator
- See bindings/regulator/arizona-regulator.txt
-
- ldo1 : Node containing initialization data for the LDO1 regulator
- See bindings/regulator/arizona-regulator.txt
- (cs47l85, wm1840)
-
-Example:
-
-cs47l85@0 {
- compatible = "cirrus,cs47l85";
- reg = <0>;
-
- reset-gpios = <&gpio 0>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <&host_irq1>;
- interrupt-parent = <&gic>;
-
- gpio-controller;
- #gpio-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index ddf190cb800b..e675611f80d0 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -66,8 +66,8 @@ patternProperties:
reg:
description: Identify trigger hardware block.
items:
- minimum: 0
- maximum: 2
+ minimum: 0
+ maximum: 2
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
index 590849ee9f32..f212fc6e1661 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -67,23 +67,22 @@ properties:
description:
One or two <index level filter> to describe break input
configurations.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-matrix
- - items:
- items:
- - description: |
- "index" indicates on which break input (0 or 1) the
- configuration should be applied.
- enum: [ 0 , 1]
- - description: |
- "level" gives the active level (0=low or 1=high) of the
- input signal for this configuration
- enum: [ 0, 1 ]
- - description: |
- "filter" gives the filtering value (up to 15) to be applied.
- maximum: 15
- minItems: 1
- maxItems: 2
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "index" indicates on which break input (0 or 1) the
+ configuration should be applied.
+ enum: [0, 1]
+ - description: |
+ "level" gives the active level (0=low or 1=high) of the
+ input signal for this configuration
+ enum: [0, 1]
+ - description: |
+ "filter" gives the filtering value (up to 15) to be applied.
+ maximum: 15
+ minItems: 1
+ maxItems: 2
required:
- "#pwm-cells"
@@ -102,8 +101,8 @@ patternProperties:
reg:
description: Identify trigger hardware block.
items:
- minimum: 0
- maximum: 16
+ minimum: 0
+ maximum: 16
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
index be7faa6dc055..dd995d7dc1a6 100644
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -29,8 +29,7 @@ properties:
onkey:
type: object
- allOf:
- - $ref: ../input/input.yaml
+ $ref: ../input/input.yaml
properties:
compatible:
@@ -68,8 +67,7 @@ properties:
watchdog:
type: object
- allOf:
- - $ref: ../watchdog/watchdog.yaml
+ $ref: ../watchdog/watchdog.yaml
properties:
compatible:
@@ -190,8 +188,7 @@ properties:
description: STPMIC1 voltage regulators supplies
"^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
- allOf:
- - $ref: ../regulator/regulator.yaml
+ $ref: ../regulator/regulator.yaml
"^ldo[1-2,5-6]$":
type: object
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 39375e4313d2..19bdaf781853 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -33,13 +33,13 @@ properties:
compatible:
anyOf:
- items:
- - enum:
- - allwinner,sun8i-a83t-system-controller
- - allwinner,sun8i-h3-system-controller
- - allwinner,sun8i-v3s-system-controller
- - allwinner,sun50i-a64-system-controller
+ - enum:
+ - allwinner,sun8i-a83t-system-controller
+ - allwinner,sun8i-h3-system-controller
+ - allwinner,sun8i-v3s-system-controller
+ - allwinner,sun50i-a64-system-controller
- - const: syscon
+ - const: syscon
- contains:
const: syscon
@@ -52,9 +52,8 @@ properties:
description: |
The size (in bytes) of the IO accesses that should be performed
on the device.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 1, 2, 4, 8 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8]
hwlocks:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
new file mode 100644
index 000000000000..4c0106cea36d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ These devices are audio SoCs with extensive digital capabilities and a
+ range of analogue I/O.
+
+allOf:
+ - $ref: /schemas/sound/wlf,arizona.yaml#
+ - $ref: /schemas/regulator/wlf,arizona.yaml#
+ - $ref: /schemas/extcon/wlf,arizona.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l24
+ - wlf,wm1831
+ then:
+ required:
+ - DCVDD-supply
+ - MICVDD-supply
+ else:
+ properties:
+ LDOVDD-supply:
+ description:
+ Digital power supply, used internally to generate DCVDD when
+ internally supplied.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - wlf,wm1814
+ - wlf,wm5102
+ - wlf,wm5110
+ - wlf,wm8280
+ - wlf,wm8997
+ - wlf,wm8998
+ then:
+ properties:
+ DBVDD2-supply:
+ description:
+ Databus power supply.
+
+ required:
+ - DBVDD2-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - wlf,wm1814
+ - wlf,wm5102
+ - wlf,wm5110
+ - wlf,wm8280
+ - wlf,wm8998
+ then:
+ properties:
+ DBVDD3-supply:
+ description:
+ Databus power supply.
+
+ required:
+ - DBVDD3-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l24
+ - wlf,wm1831
+ - wlf,wm8997
+ then:
+ properties:
+ SPKVDD-supply:
+ description:
+ Mono speaker driver power supply.
+
+ required:
+ - SPKVDD-supply
+ else:
+ properties:
+ SPKVDDL-supply:
+ description:
+ Left speaker driver power supply.
+
+ SPKVDDR-supply:
+ description:
+ Right speaker driver power supply.
+
+ required:
+ - SPKVDDL-supply
+ - SPKVDDR-supply
+
+properties:
+ compatible:
+ enum:
+ - cirrus,cs47l24
+ - wlf,wm1814
+ - wlf,wm1831
+ - wlf,wm5102
+ - wlf,wm5110
+ - wlf,wm8280
+ - wlf,wm8997
+ - wlf,wm8998
+
+ reg:
+ maxItems: 1
+
+ AVDD-supply:
+ description:
+ Analogue power supply.
+
+ CPVDD-supply:
+ description:
+ Charge pump power supply.
+
+ DBVDD1-supply:
+ description:
+ Databus power supply.
+
+ DCVDD-supply:
+ description:
+ Digital power supply, normally supplied internally except on cs47l24,
+ wm1831 where it is mandatory.
+
+ MICVDD-supply:
+ description:
+ Microphone power supply, normally supplied internally except on
+ cs47l24, wm1831 where it is mandatory.
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number and the second cell is used to
+ specify optional parameters.
+ const: 2
+
+ wlf,gpio-defaults:
+ description:
+ A list of GPIO configuration register values. Defines for the
+ appropriate values can found in dt-bindings/mfd/arizona.h. If
+ absent, no configuration of these registers is performed. If any
+ entry has a value that is out of range for a 16 bit register then the
+ chip default will be used. If present exactly five values must be
+ specified.
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ minItems: 1
+ maxItems: 5
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ The first cell is the IRQ number. The second cell is the flags,
+ encoded as trigger masks.
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description:
+ Should reference the clocks supplied on MCLK1 and MCLK2.
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ description:
+ Should contains two strings mclk1 for the clock supplied on MCLK1,
+ recommended to be a high quality audio reference clock mclk2 for the
+ clock supplied on MCLK2, recommended to be an always on 32k clock.
+ oneOf:
+ - items:
+ - const: mclk1
+ - items:
+ - const: mclk2
+ - items:
+ - const: mclk1
+ - const: mclk2
+
+ reset-gpios:
+ maxItems: 1
+
+ wlf,reset:
+ description:
+ GPIO specifier for the GPIO controlling RESET
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - AVDD-supply
+ - CPVDD-supply
+ - DBVDD1-supply
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/mfd/arizona.h>
+ i2c@e0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe0004000 0x1000>;
+
+ wm5102: codec@1a {
+ compatible = "wlf,wm5102";
+ reg = <0x1a>;
+
+ reset-gpios = <&gpio 0>;
+ wlf,ldoena = <&gpio 1>;
+
+ AVDD-supply = <&vdd1v8>;
+ DBVDD1-supply = <&vdd1v8>;
+ DBVDD2-supply = <&vdd1v8>;
+ DBVDD3-supply = <&vdd1v8>;
+ CPVDD-supply = <&vdd1v8>;
+ LDOVDD-supply = <&vdd1v8>;
+ SPKVDDL-supply = <&vdd5v>;
+ SPKVDDR-supply = <&vdd5v>;
+
+ interrupts = <347>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ #sound-dai-cells = <1>;
+
+ wlf,gpio-defaults = <
+ ARIZONA_GP_FN_TXLRCLK
+ ARIZONA_GP_DEFAULT
+ ARIZONA_GP_DEFAULT
+ ARIZONA_GP_DEFAULT
+ ARIZONA_GP_DEFAULT
+ >;
+
+ clocks = <&clks 0>, <&clks 1>;
+ clock-names = "mclk1", "mclk2";
+
+ wlf,inmode = <ARIZONA_INMODE_DIFF ARIZONA_INMODE_DMIC>;
+ wlf,dmic-ref = <ARIZONA_DMIC_MICBIAS1 ARIZONA_DMIC_MICBIAS3>;
+
+ wlf,use-jd2;
+ wlf,use-jd2-nopull;
+ wlf,jd-invert;
+
+ wlf,micd-software-compare;
+ wlf,micd-detect-debounce = <0>;
+ wlf,micd-pol-gpio = <&codec 2 0>;
+ wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
+ wlf,micd-dbtime = <4>;
+ wlf,micd-timeout-ms = <100>;
+ wlf,micd-force-micbias;
+ wlf,micd-configs = <0 ARIZONA_DMIC_MICBIAS1 0>,
+ <0x2000 ARIZONA_DMIC_MICBIAS2 1>;
+
+ wlf,gpsw = <ARIZONA_GPSW_OPEN>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
index 78dcf6ef3883..d1175030781a 100644
--- a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
+++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
@@ -20,16 +20,20 @@ properties:
- description: Qi Hardware Ben NanoNote
items:
- const: qi,lb60
+ - const: ingenic,jz4740
- description: Game Consoles Worldwide GCW Zero
items:
- const: gcw,zero
+ - const: ingenic,jz4770
- description: MIPS Creator CI20
items:
- const: img,ci20
+ - const: ingenic,jz4780
- description: YSH & ATIL General Board CU Neo
items:
- const: yna,cu1000-neo
+ - const: ingenic,x1000
...
diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
index 200de9396036..987b287f3bff 100644
--- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -41,8 +41,8 @@ properties:
patternProperties:
"^sdhci@[0-9a-f]+$":
type: object
- allOf:
- - $ref: mmc-controller.yaml
+ $ref: mmc-controller.yaml
+
properties:
compatible:
enum:
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
index 2f45dd0d04db..d93f7794a85f 100644
--- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -17,7 +17,7 @@ properties:
compatible:
items:
- enum:
- - socionext,uniphier-sd4hc
+ - socionext,uniphier-sd4hc
- const: cdns,sd4hc
reg:
@@ -36,91 +36,80 @@ properties:
cdns,phy-input-delay-sd-highspeed:
description: Value of the delay in the input path for SD high-speed timing
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x1f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
cdns,phy-input-delay-legacy:
description: Value of the delay in the input path for legacy timing
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x1f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
cdns,phy-input-delay-sd-uhs-sdr12:
description: Value of the delay in the input path for SD UHS SDR12 timing
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x1f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
cdns,phy-input-delay-sd-uhs-sdr25:
description: Value of the delay in the input path for SD UHS SDR25 timing
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x1f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
cdns,phy-input-delay-sd-uhs-sdr50:
description: Value of the delay in the input path for SD UHS SDR50 timing
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x1f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
cdns,phy-input-delay-sd-uhs-ddr50:
description: Value of the delay in the input path for SD UHS DDR50 timing
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x1f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
cdns,phy-input-delay-mmc-highspeed:
description: Value of the delay in the input path for MMC high-speed timing
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x1f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
cdns,phy-input-delay-mmc-ddr:
description: Value of the delay in the input path for eMMC high-speed DDR timing
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x1f
# PHY DLL clock delays:
# Each delay property represents the fraction of the clock period.
# The approximate delay value will be
# (<delay property value>/128)*sdmclk_clock_period.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
cdns,phy-dll-delay-sdclk:
description: |
Value of the delay introduced on the sdclk output for all modes except
HS200, HS400 and HS400_ES.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x7f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x7f
cdns,phy-dll-delay-sdclk-hsmmc:
description: |
Value of the delay introduced on the sdclk output for HS200, HS400 and
HS400_ES speed modes.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x7f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x7f
cdns,phy-dll-delay-strobe:
description: |
Value of the delay introduced on the dat_strobe input used in
HS400 / HS400_ES speed modes.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 0x7f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x7f
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
new file mode 100644
index 000000000000..e60bfe980ab3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/ingenic,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs MMC Controller DT bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-mmc
+ - ingenic,jz4725b-mmc
+ - ingenic,jz4760-mmc
+ - ingenic,jz4780-mmc
+ - ingenic,x1000-mmc
+ - items:
+ - const: ingenic,jz4770-mmc
+ - const: ingenic,jz4760-mmc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: mmc
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ #include <dt-bindings/dma/jz4780-dma.h>
+ mmc0: mmc@13450000 {
+ compatible = "ingenic,jz4780-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu JZ4780_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
+ <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/jz4740.txt b/Documentation/devicetree/bindings/mmc/jz4740.txt
deleted file mode 100644
index 453d3b9d145d..000000000000
--- a/Documentation/devicetree/bindings/mmc/jz4740.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Ingenic XBurst MMC controllers
-
-This file documents the device tree properties used for the MMC controller in
-Ingenic JZ4740/JZ4760/JZ4780/X1000 SoCs. These are in addition to the core MMC
-properties described in mmc.txt.
-
-Required properties:
-- compatible: Should be one of the following:
- - "ingenic,jz4740-mmc" for the JZ4740
- - "ingenic,jz4725b-mmc" for the JZ4725B
- - "ingenic,jz4760-mmc" for the JZ4760
- - "ingenic,jz4780-mmc" for the JZ4780
- - "ingenic,x1000-mmc" for the X1000
-- reg: Should contain the MMC controller registers location and length.
-- interrupts: Should contain the interrupt specifier of the MMC controller.
-- clocks: Clock for the MMC controller.
-
-Optional properties:
-- dmas: List of DMA specifiers with the controller specific format
- as described in the generic DMA client binding. A tx and rx
- specifier is required.
-- dma-names: RX and TX DMA request names.
- Should be "rx" and "tx", in that order.
-
-For additional details on DMA client bindings see ../dma/dma.txt.
-
-Example:
-
-mmc0: mmc@13450000 {
- compatible = "ingenic,jz4780-mmc";
- reg = <0x13450000 0x1000>;
-
- interrupt-parent = <&intc>;
- interrupts = <37>;
-
- clocks = <&cgu JZ4780_CLK_MSC0>;
- clock-names = "mmc";
-
- dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>, <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
- dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index acc9f10871d4..4931fab34d81 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -76,20 +76,18 @@ properties:
# Other properties
bus-width:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 4, 8]
- default: 1
description:
Number of data lines.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 4, 8]
+ default: 1
max-frequency:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 400000
- - maximum: 200000000
description:
Maximum operating frequency of the bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 400000
+ maximum: 200000000
disable-wp:
$ref: /schemas/types.yaml#/definitions/flag
@@ -212,13 +210,12 @@ properties:
eMMC HS400 enhanced strobe mode is supported
dsr:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 0xffff
description:
Value the card Driver Stage Register (DSR) should be programmed
with.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 0xffff
no-sdio:
$ref: /schemas/types.yaml#/definitions/flag
@@ -238,25 +235,23 @@ properties:
initialization.
fixed-emmc-driver-type:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 4
description:
For non-removable eMMC, enforce this driver type. The value is
the driver type as specified in the eMMC specification (table
206 in spec version 5.1)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 4
post-power-on-delay-ms:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 10
description:
It was invented for MMC pwrseq-simple which could be referred to
mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
waiting for I/O signalling and card power supply to be stable,
regardless of whether pwrseq-simple is used. Default to 10ms if
no available.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 10
supports-cqe:
$ref: /schemas/types.yaml#/definitions/flag
@@ -333,8 +328,8 @@ patternProperties:
- reg
"^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
minItems: 2
maxItems: 2
items:
diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
index 12b40213426d..1380501fb8f0 100644
--- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -47,7 +47,7 @@ examples:
- |
mmc0: mmc@e0330000 {
compatible = "actions,owl-mmc";
- reg = <0x0 0xe0330000 0x0 0x4000>;
+ reg = <0xe0330000 0x4000>;
interrupts = <0 42 4>;
clocks = <&cmu 56>;
resets = <&cmu 23>;
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
index 89c3edd6a728..01316185e771 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -30,21 +30,21 @@ properties:
- items:
- enum:
# for Rockchip PX30
- - rockchip,px30-dw-mshc
+ - rockchip,px30-dw-mshc
# for Rockchip RK3036
- - rockchip,rk3036-dw-mshc
+ - rockchip,rk3036-dw-mshc
# for Rockchip RK322x
- - rockchip,rk3228-dw-mshc
+ - rockchip,rk3228-dw-mshc
# for Rockchip RK3308
- - rockchip,rk3308-dw-mshc
+ - rockchip,rk3308-dw-mshc
# for Rockchip RK3328
- - rockchip,rk3328-dw-mshc
+ - rockchip,rk3328-dw-mshc
# for Rockchip RK3368
- - rockchip,rk3368-dw-mshc
+ - rockchip,rk3368-dw-mshc
# for Rockchip RK3399
- - rockchip,rk3399-dw-mshc
+ - rockchip,rk3399-dw-mshc
# for Rockchip RV1108
- - rockchip,rv1108-dw-mshc
+ - rockchip,rv1108-dw-mshc
- const: rockchip,rk3288-dw-mshc
reg:
@@ -76,8 +76,7 @@ properties:
high speed modes.
rockchip,default-sample-phase:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 360
default: 0
@@ -87,8 +86,7 @@ properties:
If not specified 0 deg will be used.
rockchip,desired-num-phases:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 360
default: 360
@@ -111,7 +109,7 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
sdmmc: mmc@ff0c0000 {
compatible = "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xff0c0000 0x0 0x4000>;
+ reg = <0xff0c0000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
index cdfac9b4411b..8d6413f48823 100644
--- a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
@@ -35,15 +35,15 @@ properties:
oneOf:
- const: host
- items:
- - const: host
- - const: bridge
+ - const: host
+ - const: bridge
- items:
- - const: host
- - const: hw
+ - const: host
+ - const: hw
- items:
- - const: host
- - const: bridge
- - const: hw
+ - const: host
+ - const: bridge
+ - const: hw
resets:
minItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
index 890d47a87ac5..85bd528e9a14 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -27,39 +27,35 @@ properties:
clock to this at probe time.
fifo-depth:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description:
The maximum size of the tx/rx fifo's. If this property is not
specified, the default value of the fifo size is determined from the
controller registers.
+ $ref: /schemas/types.yaml#/definitions/uint32
card-detect-delay:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 0
description:
Delay in milli-seconds before detecting card after card
insert event. The default value is 0.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
data-addr:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description:
Override fifo address with value provided by DT. The default FIFO reg
offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
by driver. If the controller does not follow this rule, please use
this property to set fifo address in device tree.
+ $ref: /schemas/types.yaml#/definitions/uint32
fifo-watermark-aligned:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/flag
description:
Data done irq is expected if data length is less than
watermark in PIO mode. But fifo watermark is requested to be aligned
with data length in some SoC so that TX/RX irq can be generated with
data done irq. Add this watermark quirk to mark this requirement and
force fifo watermark setting accordingly.
+ $ref: /schemas/types.yaml#/definitions/flag
dmas:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
index 5d3fa412aabd..c033ac3f147d 100644
--- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -75,13 +75,12 @@ patternProperties:
allwinner,rb:
description:
Contains the native Ready/Busy IDs.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 2
- items:
- minimum: 0
- maximum: 1
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
index 46e6b6726bc0..c07b91592cbd 100644
--- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -54,8 +54,8 @@ properties:
reg: register reset
oneOf:
- items:
- - const: nand
- - const: reg
+ - const: nand
+ - const: reg
- const: nand
- const: reg
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
deleted file mode 100644
index c02259353327..000000000000
--- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-* Ingenic JZ4780 NAND/ECC
-
-This file documents the device tree bindings for NAND flash devices on the
-JZ4780. NAND devices are connected to the NEMC controller (described in
-memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
-be children of the NEMC node.
-
-Required NAND controller device properties:
-- compatible: Should be one of:
- * ingenic,jz4740-nand
- * ingenic,jz4725b-nand
- * ingenic,jz4780-nand
-- reg: For each bank with a NAND chip attached, should specify a bank number,
- an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank).
-
-Optional NAND controller device properties:
-- ecc-engine: To make use of the hardware ECC controller, this
- property must contain a phandle for the ECC controller node. The required
- properties for this node are described below. If this is not specified,
- software ECC will be used instead.
-
-Optional children nodes:
-- Individual NAND chips are children of the NAND controller node.
-
-Required children node properties:
-- reg: An integer ranging from 1 to 6 representing the CS line to use.
-
-Optional children node properties:
-- nand-ecc-step-size: ECC block size in bytes.
-- nand-ecc-strength: ECC strength (max number of correctable bits).
-- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default
-- nand-on-flash-bbt: boolean to enable on flash bbt option, if not present false
-- rb-gpios: GPIO specifier for the busy pin.
-- wp-gpios: GPIO specifier for the write protect pin.
-
-Optional child node of NAND chip nodes:
-- partitions: see Documentation/devicetree/bindings/mtd/partition.txt
-
-Example:
-
-nemc: nemc@13410000 {
- ...
-
- nandc: nand-controller@1 {
- compatible = "ingenic,jz4780-nand";
- reg = <1 0 0x1000000>; /* Bank 1 */
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ecc-engine = <&bch>;
-
- nand@1 {
- reg = <1>;
-
- nand-ecc-step-size = <1024>;
- nand-ecc-strength = <24>;
- nand-ecc-mode = "hw";
- nand-on-flash-bbt;
-
- rb-gpios = <&gpa 20 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpf 22 GPIO_ACTIVE_LOW>;
-
- partitions {
- #address-cells = <2>;
- #size-cells = <2>;
- ...
- }
- };
- };
-};
-
-The ECC controller is a separate SoC component used for error correction on
-NAND devices. The following is a description of the device properties for a
-ECC controller.
-
-Required ECC properties:
-- compatible: Should be one of:
- * ingenic,jz4740-ecc
- * ingenic,jz4725b-bch
- * ingenic,jz4780-bch
-- reg: Should specify the ECC controller registers location and length.
-- clocks: Clock for the ECC controller.
-
-Example:
-
-bch: bch@134d0000 {
- compatible = "ingenic,jz4780-bch";
- reg = <0x134d0000 0x10000>;
-
- clocks = <&cgu JZ4780_CLK_BCH>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
new file mode 100644
index 000000000000..8abb6d463cb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND controller devicetree bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: nand-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ingenic,jz4740-nand
+ - ingenic,jz4725b-nand
+ - ingenic,jz4780-nand
+
+ reg:
+ items:
+ - description: Bank number, offset and size of first attached NAND chip
+ - description: Bank number, offset and size of second attached NAND chip
+ - description: Bank number, offset and size of third attached NAND chip
+ - description: Bank number, offset and size of fourth attached NAND chip
+ minItems: 1
+
+ ecc-engine: true
+
+ partitions:
+ type: object
+ description:
+ Node containing description of fixed partitions.
+ See Documentation/devicetree/bindings/mtd/partition.txt
+
+patternProperties:
+ "^nand@[a-f0-9]$":
+ type: object
+ properties:
+ rb-gpios:
+ description: GPIO specifier for the busy pin.
+ maxItems: 1
+
+ wp-gpios:
+ description: GPIO specifier for the write-protect pin.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ memory-controller@13410000 {
+ compatible = "ingenic,jz4780-nemc";
+ reg = <0x13410000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
+
+ clocks = <&cgu JZ4780_CLK_NEMC>;
+
+ nand-controller@1 {
+ compatible = "ingenic,jz4780-nand";
+ reg = <1 0 0x1000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ecc-engine = <&bch>;
+
+ ingenic,nemc-tAS = <10>;
+ ingenic,nemc-tAH = <5>;
+ ingenic,nemc-tBP = <10>;
+ ingenic,nemc-tAW = <15>;
+ ingenic,nemc-tSTRV = <100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc_cs1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x0 0x0 0x800000>;
+ };
+
+ partition@800000 {
+ label = "u-boot";
+ reg = <0x0 0x800000 0x0 0x200000>;
+ };
+
+ partition@a00000 {
+ label = "u-boot-env";
+ reg = <0x0 0xa00000 0x0 0x200000>;
+ };
+
+ partition@c00000 {
+ label = "boot";
+ reg = <0x0 0xc00000 0x0 0x4000000>;
+ };
+
+ partition@4c00000 {
+ label = "system";
+ reg = <0x0 0x4c00000 0x1 0xfb400000>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index d261b7096c69..cde7c4d79efe 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -47,29 +47,26 @@ patternProperties:
Contains the native Ready/Busy IDs.
nand-ecc-mode:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
- - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ]
description:
Desired ECC engine, either hardware (most of the time
embedded in the NAND controller) or software correction
(Linux will handle the calculations). soft_bch is deprecated
and should be replaced by soft and nand-ecc-algo.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]
nand-ecc-algo:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
- - enum: [ hamming, bch, rs ]
description:
Desired ECC algorithm.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [hamming, bch, rs]
nand-bus-width:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 8, 16 ]
- - default: 8
description:
Bus width to the NAND chip
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [8, 16]
+ default: 8
nand-on-flash-bbt:
$ref: /schemas/types.yaml#/definitions/flag
@@ -83,18 +80,16 @@ patternProperties:
build a volatile BBT in RAM.
nand-ecc-strength:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 1
description:
Maximum number of bits that can be corrected per ECC step.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
nand-ecc-step-size:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 1
description:
Number of data bytes covered by a single ECC step.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
nand-ecc-maximize:
$ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index db36b4d86484..c7c9ad4e3f9f 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -19,8 +19,8 @@ properties:
- const: allwinner,sun8i-v3s-emac
- const: allwinner,sun50i-a64-emac
- items:
- - const: allwinner,sun50i-h6-emac
- - const: allwinner,sun50i-a64-emac
+ - const: allwinner,sun50i-h6-emac
+ - const: allwinner,sun50i-a64-emac
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
deleted file mode 100644
index c8ae996bd8f2..000000000000
--- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Calxeda Highbank 10Gb XGMAC Ethernet
-
-Required properties:
-- compatible : Should be "calxeda,hb-xgmac"
-- reg : Address and length of the register set for the device
-- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt.
- The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt.
-
-Optional properties:
-- dma-coherent : Present if dma operations are coherent
-
-Example:
-
-ethernet@fff50000 {
- compatible = "calxeda,hb-xgmac";
- reg = <0xfff50000 0x1000>;
- interrupts = <0 77 4 0 78 4 0 79 4>;
-};
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
new file mode 100644
index 000000000000..c3ca26666ede
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank 10Gb XGMAC Ethernet controller
+
+description: |
+ The Calxeda XGMAC Ethernet controllers are directly connected to the
+ internal machine "network fabric", which is set up, initialised and
+ managed by the firmware. So there are no PHY properties in this
+ binding. Switches in the fabric take care of routing and mapping the
+ traffic to external network ports.
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+ compatible:
+ const: calxeda,hb-xgmac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ Can point to at most 3 xgmac interrupts. The 1st one is the main
+ interrupt, the 2nd one is used for power management. The optional
+ 3rd one is the low power state interrupt.
+ minItems: 2
+ maxItems: 3
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ ethernet@fff50000 {
+ compatible = "calxeda,hb-xgmac";
+ reg = <0xfff50000 0x1000>;
+ interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index cccf8202c8f7..798fa5fb7bb2 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -9,7 +9,7 @@ title: Bosch MCAN controller Bindings
description: Bosch MCAN controller for CAN bus
maintainers:
- - Sriram Dash <sriram.dash@samsung.com>
+ - Sriram Dash <sriram.dash@samsung.com>
properties:
compatible:
@@ -51,61 +51,60 @@ properties:
bosch,mram-cfg:
description: |
- Message RAM configuration data.
- Multiple M_CAN instances can share the same Message RAM
- and each element(e.g Rx FIFO or Tx Buffer and etc) number
- in Message RAM is also configurable, so this property is
- telling driver how the shared or private Message RAM are
- used by this M_CAN controller.
-
- The format should be as follows:
- <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
- The 'offset' is an address offset of the Message RAM where
- the following elements start from. This is usually set to
- 0x0 if you're using a private Message RAM. The remain cells
- are used to specify how many elements are used for each FIFO/Buffer.
-
- M_CAN includes the following elements according to user manual:
- 11-bit Filter 0-128 elements / 0-128 words
- 29-bit Filter 0-64 elements / 0-128 words
- Rx FIFO 0 0-64 elements / 0-1152 words
- Rx FIFO 1 0-64 elements / 0-1152 words
- Rx Buffers 0-64 elements / 0-1152 words
- Tx Event FIFO 0-32 elements / 0-64 words
- Tx Buffers 0-32 elements / 0-576 words
-
- Please refer to 2.4.1 Message RAM Configuration in Bosch
- M_CAN user manual for details.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/int32-array
- - items:
- items:
- - description: The 'offset' is an address offset of the Message RAM
- where the following elements start from. This is usually
- set to 0x0 if you're using a private Message RAM.
- default: 0
- - description: 11-bit Filter 0-128 elements / 0-128 words
- minimum: 0
- maximum: 128
- - description: 29-bit Filter 0-64 elements / 0-128 words
- minimum: 0
- maximum: 64
- - description: Rx FIFO 0 0-64 elements / 0-1152 words
- minimum: 0
- maximum: 64
- - description: Rx FIFO 1 0-64 elements / 0-1152 words
- minimum: 0
- maximum: 64
- - description: Rx Buffers 0-64 elements / 0-1152 words
- minimum: 0
- maximum: 64
- - description: Tx Event FIFO 0-32 elements / 0-64 words
- minimum: 0
- maximum: 32
- - description: Tx Buffers 0-32 elements / 0-576 words
- minimum: 0
- maximum: 32
- maxItems: 1
+ Message RAM configuration data.
+ Multiple M_CAN instances can share the same Message RAM
+ and each element(e.g Rx FIFO or Tx Buffer and etc) number
+ in Message RAM is also configurable, so this property is
+ telling driver how the shared or private Message RAM are
+ used by this M_CAN controller.
+
+ The format should be as follows:
+ <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
+ The 'offset' is an address offset of the Message RAM where
+ the following elements start from. This is usually set to
+ 0x0 if you're using a private Message RAM. The remain cells
+ are used to specify how many elements are used for each FIFO/Buffer.
+
+ M_CAN includes the following elements according to user manual:
+ 11-bit Filter 0-128 elements / 0-128 words
+ 29-bit Filter 0-64 elements / 0-128 words
+ Rx FIFO 0 0-64 elements / 0-1152 words
+ Rx FIFO 1 0-64 elements / 0-1152 words
+ Rx Buffers 0-64 elements / 0-1152 words
+ Tx Event FIFO 0-32 elements / 0-64 words
+ Tx Buffers 0-32 elements / 0-576 words
+
+ Please refer to 2.4.1 Message RAM Configuration in Bosch
+ M_CAN user manual for details.
+ $ref: /schemas/types.yaml#/definitions/int32-array
+ items:
+ items:
+ - description: The 'offset' is an address offset of the Message RAM where
+ the following elements start from. This is usually set to 0x0 if
+ you're using a private Message RAM.
+ default: 0
+ - description: 11-bit Filter 0-128 elements / 0-128 words
+ minimum: 0
+ maximum: 128
+ - description: 29-bit Filter 0-64 elements / 0-128 words
+ minimum: 0
+ maximum: 64
+ - description: Rx FIFO 0 0-64 elements / 0-1152 words
+ minimum: 0
+ maximum: 64
+ - description: Rx FIFO 1 0-64 elements / 0-1152 words
+ minimum: 0
+ maximum: 64
+ - description: Rx Buffers 0-64 elements / 0-1152 words
+ minimum: 0
+ maximum: 64
+ - description: Tx Event FIFO 0-32 elements / 0-64 words
+ minimum: 0
+ maximum: 32
+ - description: Tx Buffers 0-32 elements / 0-576 words
+ minimum: 0
+ maximum: 32
+ maxItems: 1
can-transceiver:
$ref: can-transceiver.yaml#
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index ac471b60ed6a..1c4474036d46 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -14,25 +14,23 @@ properties:
pattern: "^ethernet(@.*)?$"
local-mac-address:
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint8-array
- - items:
- - minItems: 6
- maxItems: 6
description:
Specifies the MAC address that was assigned to the network device.
+ $ref: /schemas/types.yaml#definitions/uint8-array
+ items:
+ - minItems: 6
+ maxItems: 6
mac-address:
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint8-array
- - items:
- - minItems: 6
- maxItems: 6
description:
Specifies the MAC address that was last used by the boot
program; should be used in cases where the MAC address assigned
to the device by the boot program is different from the
local-mac-address property.
+ $ref: /schemas/types.yaml#definitions/uint8-array
+ items:
+ - minItems: 6
+ maxItems: 6
max-frame-size:
$ref: /schemas/types.yaml#definitions/uint32
@@ -133,15 +131,14 @@ properties:
is used for components that can have configurable fifo sizes.
managed:
- allOf:
- - $ref: /schemas/types.yaml#definitions/string
- - default: auto
- enum:
- - auto
- - in-band-status
description:
Specifies the PHY management type. If auto is set and fixed-link
is not specified, it uses MDIO for management.
+ $ref: /schemas/types.yaml#definitions/string
+ default: auto
+ enum:
+ - auto
+ - in-band-status
fixed-link:
allOf:
@@ -183,11 +180,10 @@ properties:
then:
properties:
speed:
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32
- - enum: [10, 100, 1000]
description:
Link speed.
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [10, 100, 1000]
full-duplex:
$ref: /schemas/types.yaml#definitions/flag
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
index 5a6c9d20c0ba..1788884b8c28 100644
--- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
@@ -20,15 +20,13 @@ allOf:
properties:
qca,clk-out-frequency:
description: Clock output frequency in Hertz.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 25000000, 50000000, 62500000, 125000000 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [25000000, 50000000, 62500000, 125000000]
qca,clk-out-strength:
description: Clock output driver strength.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1, 2 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
qca,keep-pll-enabled:
description: |
@@ -52,17 +50,14 @@ properties:
type: object
description:
Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
- allOf:
- - $ref: /schemas/regulator/regulator.yaml
+ $ref: /schemas/regulator/regulator.yaml
vddh-regulator:
type: object
description:
Dummy subnode to model the external connection of the PHY VDDH
regulator to VDDIO.
- allOf:
- - $ref: /schemas/regulator/regulator.yaml
-
+ $ref: /schemas/regulator/regulator.yaml
examples:
- |
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 7b749fc04c32..a3561276e609 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -93,16 +93,14 @@ properties:
- const: config
qcom,smem-states:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: State bits used in by the AP to signal the modem.
items:
- description: Whether the "ipa-clock-enabled" state bit is valid
- description: Whether the IPA clock is enabled (if valid)
qcom,smem-state-names:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string-array
+ $ref: /schemas/types.yaml#/definitions/string-array
description: The names of the state bits used for SMP2P output
items:
- const: ipa-clock-enabled-valid
@@ -172,9 +170,9 @@ examples:
modem-remoteproc = <&mss_pil>;
iommus = <&apps_smmu 0x720 0x3>;
- reg = <0 0x1e40000 0 0x7000>,
- <0 0x1e47000 0 0x2000>,
- <0 0x1e04000 0 0x2c000>;
+ reg = <0x1e40000 0x7000>,
+ <0x1e47000 0x2000>,
+ <0x1e04000 0x2c000>;
reg-names = "ipa-reg",
"ipa-shared",
"gsi";
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
index 7f84df9790e2..08678af5ed93 100644
--- a/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -29,8 +29,9 @@ properties:
- renesas,rcar-gen1-ether # a generic R-Car Gen1 device
- items:
- enum:
- - renesas,ether-r8a7745 # device is a part of R8A7745 SoC
+ - renesas,ether-r8a7742 # device is a part of R8A7742 SoC
- renesas,ether-r8a7743 # device is a part of R8A7743 SoC
+ - renesas,ether-r8a7745 # device is a part of R8A7745 SoC
- renesas,ether-r8a7790 # device is a part of R8A7790 SoC
- renesas,ether-r8a7791 # device is a part of R8A7791 SoC
- renesas,ether-r8a7793 # device is a part of R8A7793 SoC
@@ -40,8 +41,8 @@ properties:
reg:
items:
- - description: E-DMAC/feLic registers
- - description: TSU registers
+ - description: E-DMAC/feLic registers
+ - description: TSU registers
minItems: 1
interrupts:
@@ -92,7 +93,7 @@ examples:
ethernet@ee700000 {
compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether";
- reg = <0 0xee700000 0 0x400>;
+ reg = <0xee700000 0x400>;
interrupt-parent = <&gic>;
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index 87dad2dd8ca0..032b76f14f4f 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -5,6 +5,7 @@ interface contains.
Required properties:
- compatible: Must contain one or more of the following:
+ - "renesas,etheravb-r8a7742" for the R8A7742 SoC.
- "renesas,etheravb-r8a7743" for the R8A7743 SoC.
- "renesas,etheravb-r8a7744" for the R8A7744 SoC.
- "renesas,etheravb-r8a7745" for the R8A7745 SoC.
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index e08cd4c4d568..30a1efd26626 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -27,6 +27,7 @@ select:
- snps,dwmac-3.710
- snps,dwmac-4.00
- snps,dwmac-4.10a
+ - snps,dwmac-4.20a
- snps,dwxgmac
- snps,dwxgmac-2.10
@@ -62,6 +63,7 @@ properties:
- snps,dwmac-3.710
- snps,dwmac-4.00
- snps,dwmac-4.10a
+ - snps,dwmac-4.20a
- snps,dwxgmac
- snps,dwxgmac-2.10
@@ -87,7 +89,8 @@ properties:
clocks:
minItems: 1
- maxItems: 3
+ maxItems: 5
+ additionalItems: true
items:
- description: GMAC main clock
- description: Peripheral registers interface clock
@@ -97,6 +100,8 @@ properties:
clock will be used and this is fine on some platforms.
clock-names:
+ minItems: 1
+ maxItems: 5
additionalItems: true
contains:
enum:
@@ -199,14 +204,13 @@ properties:
snps,reset-delays-us:
deprecated: true
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32-array
- - minItems: 3
- maxItems: 3
description:
Triplet of delays. The 1st cell is reset pre-delay in micro
seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
cell is reset post-delay in micro seconds.
+ $ref: /schemas/types.yaml#definitions/uint32-array
+ minItems: 3
+ maxItems: 3
snps,aal:
$ref: /schemas/types.yaml#definitions/flag
@@ -301,27 +305,24 @@ allOf:
then:
properties:
snps,pbl:
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32
- - enum: [2, 4, 8]
description:
Programmable Burst Length (tx and rx)
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [2, 4, 8]
snps,txpbl:
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32
- - enum: [2, 4, 8]
description:
Tx Programmable Burst Length. If set, DMA tx will use this
value rather than snps,pbl.
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [2, 4, 8]
snps,rxpbl:
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32
- - enum: [2, 4, 8]
description:
Rx Programmable Burst Length. If set, DMA rx will use this
value rather than snps,pbl.
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [2, 4, 8]
snps,no-pbl-x8:
$ref: /schemas/types.yaml#definitions/flag
@@ -342,6 +343,7 @@ allOf:
- allwinner,sun50i-a64-emac
- snps,dwmac-4.00
- snps,dwmac-4.10a
+ - snps,dwmac-4.20a
- snps,dwxgmac
- snps,dwxgmac-2.10
- st,spear600-gmac
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
deleted file mode 100644
index a90eef11dc46..000000000000
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-STMicroelectronics STM32 / MCU DWMAC glue layer controller
-
-This file documents platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and
- "snps,dwmac-3.50a" to select IP version.
- For MPU family should be "st,stm32mp1-dwmac" to select
- glue, and "snps,dwmac-4.20a" to select IP version.
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: Should be "stmmaceth" for the host clock.
- Should be "mac-clk-tx" for the MAC TX clock.
- Should be "mac-clk-rx" for the MAC RX clock.
- For MPU family need to add also "ethstp" for power mode clock
-- interrupt-names: Should contain a list of interrupt names corresponding to
- the interrupts in the interrupts property, if available.
- Should be "macirq" for the main MAC IRQ
- Should be "eth_wake_irq" for the IT which wake up system
-- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
- encompases the glue register, and the offset of the control register.
-
-Optional properties:
-- clock-names: For MPU family "eth-ck" for PHY without quartz
-- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
-- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
-
-Example:
-
- ethernet@40028000 {
- compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
- reg = <0x40028000 0x8000>;
- reg-names = "stmmaceth";
- interrupts = <0 61 0>, <0 62 0>;
- interrupt-names = "macirq", "eth_wake_irq";
- clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
- clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
- st,syscon = <&syscfg 0x4>;
- snps,pbl = <8>;
- snps,mixed-burst;
- dma-ranges;
- };
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
new file mode 100644
index 000000000000..fafa34cebdb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
+
+maintainers:
+ - Alexandre Torgue <alexandre.torgue@st.com>
+ - Christophe Roullier <christophe.roullier@st.com>
+
+description:
+ This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32-dwmac
+ - st,stm32mp1-dwmac
+ required:
+ - compatible
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - st,stm32mp1-dwmac
+ - const: snps,dwmac-4.20a
+ - items:
+ - enum:
+ - st,stm32-dwmac
+ - const: snps,dwmac-4.10a
+ - items:
+ - enum:
+ - st,stm32-dwmac
+ - const: snps,dwmac-3.50a
+
+ clocks:
+ minItems: 3
+ maxItems: 5
+ items:
+ - description: GMAC main clock
+ - description: MAC TX clock
+ - description: MAC RX clock
+ - description: For MPU family, used for power mode
+ - description: For MPU family, used for PHY without quartz
+
+ clock-names:
+ minItems: 3
+ maxItems: 5
+ contains:
+ enum:
+ - stmmaceth
+ - mac-clk-tx
+ - mac-clk-rx
+ - ethstp
+ - eth-ck
+
+ st,syscon:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description:
+ Should be phandle/offset pair. The phandle to the syscon node which
+ encompases the glue register, and the offset of the control register
+
+ st,eth-clk-sel:
+ description:
+ set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
+ type: boolean
+
+ st,eth-ref-clk-sel:
+ description:
+ set this property in RMII mode when you have PHY without crystal 50MHz and want to
+ select RCC clock instead of ETH_REF_CLK.
+ type: boolean
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - st,syscon
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ #include <dt-bindings/mfd/stm32h7-rcc.h>
+ //Example 1
+ ethernet0: ethernet@5800a000 {
+ compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "eth-ck";
+ clocks = <&rcc ETHMAC>,
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHSTP>,
+ <&rcc ETHCK_K>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_0>;
+ snps,tso;
+ phy-mode = "rgmii";
+ };
+
+ //Example 2 (MCU example)
+ ethernet1: ethernet@40028000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+ reg = <0x40028000 0x8000>;
+ reg-names = "stmmaceth";
+ interrupts = <0 61 0>, <0 62 0>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+ clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <8>;
+ snps,mixed-burst;
+ phy-mode = "mii";
+ };
+
+ //Example 3
+ ethernet2: ethernet@40027000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+ reg = <0x40028000 0x8000>;
+ reg-names = "stmmaceth";
+ interrupts = <61>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+ clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <8>;
+ phy-mode = "mii";
+ };
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 976f139bb66e..3ea0e1290dbb 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -23,14 +23,14 @@ properties:
oneOf:
- const: ti,cpsw-switch
- items:
- - const: ti,am335x-cpsw-switch
- - const: ti,cpsw-switch
+ - const: ti,am335x-cpsw-switch
+ - const: ti,cpsw-switch
- items:
- - const: ti,am4372-cpsw-switch
- - const: ti,cpsw-switch
+ - const: ti,am4372-cpsw-switch
+ - const: ti,cpsw-switch
- items:
- - const: ti,dra7-cpsw-switch
- - const: ti,cpsw-switch
+ - const: ti,dra7-cpsw-switch
+ - const: ti,cpsw-switch
reg:
maxItems: 1
@@ -105,8 +105,7 @@ properties:
description: label associated with this port
ti,dual-emac-pvid:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 1024
description:
@@ -150,10 +149,9 @@ properties:
patternProperties:
"^mdio@":
type: object
- allOf:
- - $ref: "ti,davinci-mdio.yaml#"
description:
CPSW MDIO bus.
+ $ref: "ti,davinci-mdio.yaml#"
required:
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index 242ac4935a4b..d454c1fab930 100644
--- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -18,33 +18,31 @@ allOf:
properties:
compatible:
oneOf:
- - const: ti,davinci_mdio
- - items:
- - const: ti,keystone_mdio
- - const: ti,davinci_mdio
- - items:
- - const: ti,cpsw-mdio
- - const: ti,davinci_mdio
- - items:
- - const: ti,am4372-mdio
- - const: ti,cpsw-mdio
- - const: ti,davinci_mdio
+ - const: ti,davinci_mdio
+ - items:
+ - const: ti,keystone_mdio
+ - const: ti,davinci_mdio
+ - items:
+ - const: ti,cpsw-mdio
+ - const: ti,davinci_mdio
+ - items:
+ - const: ti,am4372-mdio
+ - const: ti,cpsw-mdio
+ - const: ti,davinci_mdio
reg:
maxItems: 1
bus_freq:
- maximum: 2500000
- description:
- MDIO Bus frequency
+ maximum: 2500000
+ description: MDIO Bus frequency
ti,hwmods:
description: TI hwmod name
deprecated: true
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string-array
- - items:
- const: davinci_mdio
+ $ref: /schemas/types.yaml#/definitions/string-array
+ items:
+ const: davinci_mdio
if:
properties:
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index c87395f360a6..71d9e6c1c72e 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -103,8 +103,7 @@ properties:
type: object
description: CPSW2G NUSS external ports
- allOf:
- - $ref: ethernet-controller.yaml#
+ $ref: ethernet-controller.yaml#
properties:
reg:
@@ -139,8 +138,8 @@ properties:
patternProperties:
"^mdio@[0-9a-f]+$":
type: object
- allOf:
- - $ref: "ti,davinci-mdio.yaml#"
+ $ref: "ti,davinci-mdio.yaml#"
+
description:
CPSW MDIO bus.
@@ -174,37 +173,41 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- mcu_cpsw: ethernet@46000000 {
- compatible = "ti,am654-cpsw-nuss";
+ bus {
#address-cells = <2>;
#size-cells = <2>;
- reg = <0x0 0x46000000 0x0 0x200000>;
- reg-names = "cpsw_nuss";
- ranges = <0x0 0x0 0x46000000 0x0 0x200000>;
- dma-coherent;
- clocks = <&k3_clks 5 10>;
- clock-names = "fck";
- power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
-
- dmas = <&mcu_udmap 0xf000>,
- <&mcu_udmap 0xf001>,
- <&mcu_udmap 0xf002>,
- <&mcu_udmap 0xf003>,
- <&mcu_udmap 0xf004>,
- <&mcu_udmap 0xf005>,
- <&mcu_udmap 0xf006>,
- <&mcu_udmap 0xf007>,
- <&mcu_udmap 0x7000>;
- dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
- "rx";
-
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpsw_port1: port@1 {
+
+ mcu_cpsw: ethernet@46000000 {
+ compatible = "ti,am654-cpsw-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x46000000 0x0 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+ dma-coherent;
+ clocks = <&k3_clks 5 10>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+
+ dmas = <&mcu_udmap 0xf000>,
+ <&mcu_udmap 0xf001>,
+ <&mcu_udmap 0xf002>,
+ <&mcu_udmap 0xf003>,
+ <&mcu_udmap 0xf004>,
+ <&mcu_udmap 0xf005>,
+ <&mcu_udmap 0xf006>,
+ <&mcu_udmap 0xf007>,
+ <&mcu_udmap 0x7000>;
+ dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
reg = <1>;
ti,mac-only;
label = "port1";
@@ -213,23 +216,24 @@ examples:
phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
- };
- };
-
- davinci_mdio: mdio@f00 {
- compatible = "ti,cpsw-mdio","ti,davinci_mdio";
- reg = <0x0 0xf00 0x0 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&k3_clks 5 10>;
- clock-names = "fck";
- bus_freq = <1000000>;
-
- phy0: ethernet-phy@0 {
+ };
+ };
+
+ davinci_mdio: mdio@f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x0 0xf00 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 5 10>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+
+ phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- };
+ };
+ };
};
cpts@3d000 {
diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.txt b/Documentation/devicetree/bindings/nvmem/imx-iim.txt
deleted file mode 100644
index 1978c5bcd96d..000000000000
--- a/Documentation/devicetree/bindings/nvmem/imx-iim.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Freescale i.MX IC Identification Module (IIM) device tree bindings
-
-This binding represents the IC Identification Module (IIM) found on
-i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs.
-
-Required properties:
-- compatible: should be one of
- "fsl,imx25-iim", "fsl,imx27-iim",
- "fsl,imx31-iim", "fsl,imx35-iim",
- "fsl,imx51-iim", "fsl,imx53-iim",
-- reg: Should contain the register base and length.
-- interrupts: Should contain the interrupt for the IIM
-- clocks: Should contain a phandle pointing to the gated peripheral clock.
-
-Example:
-
- iim: iim@63f98000 {
- compatible = "fsl,imx53-iim", "fsl,imx27-iim";
- reg = <0x63f98000 0x4000>;
- interrupts = <69>;
- clocks = <&clks IMX5_CLK_IIM_GATE>;
- };
diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
new file mode 100644
index 000000000000..9cc43e7a4b38
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX IC Identification Module (IIM) device tree bindings
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+ This binding represents the IC Identification Module (IIM) found on
+ i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs.
+
+allOf:
+ - $ref: "nvmem.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx25-iim
+ - fsl,imx27-iim
+ - fsl,imx31-iim
+ - fsl,imx35-iim
+ - fsl,imx51-iim
+ - fsl,imx53-iim
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx5-clock.h>
+
+ iim: efuse@63f98000 {
+ compatible = "fsl,imx53-iim";
+ reg = <0x63f98000 0x4000>;
+ interrupts = <69>;
+ clocks = <&clks IMX5_CLK_IIM_GATE>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
deleted file mode 100644
index 6e346d5cddcf..000000000000
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
-
-This binding represents the on-chip eFuse OTP controller found on
-i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
-i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs.
-
-Required properties:
-- compatible: should be one of
- "fsl,imx6q-ocotp" (i.MX6Q/D/DL/S),
- "fsl,imx6sl-ocotp" (i.MX6SL), or
- "fsl,imx6sx-ocotp" (i.MX6SX),
- "fsl,imx6ul-ocotp" (i.MX6UL),
- "fsl,imx6ull-ocotp" (i.MX6ULL/ULZ),
- "fsl,imx7d-ocotp" (i.MX7D/S),
- "fsl,imx6sll-ocotp" (i.MX6SLL),
- "fsl,imx7ulp-ocotp" (i.MX7ULP),
- "fsl,imx8mq-ocotp" (i.MX8MQ),
- "fsl,imx8mm-ocotp" (i.MX8MM),
- "fsl,imx8mn-ocotp" (i.MX8MN),
- "fsl,imx8mp-ocotp" (i.MX8MP),
- followed by "syscon".
-- #address-cells : Should be 1
-- #size-cells : Should be 1
-- reg: Should contain the register base and length.
-- clocks: Should contain a phandle pointing to the gated peripheral clock.
-
-Optional properties:
-- read-only: disable write access
-
-Optional Child nodes:
-
-- Data cells of ocotp:
- Detailed bindings are described in bindings/nvmem/nvmem.txt
-
-Example:
- ocotp: ocotp@21bc000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,imx6sx-ocotp", "syscon";
- reg = <0x021bc000 0x4000>;
- clocks = <&clks IMX6SX_CLK_OCOTP>;
-
- tempmon_calib: calib@38 {
- reg = <0x38 4>;
- };
-
- tempmon_temp_grade: temp-grade@20 {
- reg = <0x20 4>;
- };
- };
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
new file mode 100644
index 000000000000..fe9c7df78ea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+ This binding represents the on-chip eFuse OTP controller found on
+ i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
+ i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs.
+
+allOf:
+ - $ref: "nvmem.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx6q-ocotp
+ - fsl,imx6sl-ocotp
+ - fsl,imx6sx-ocotp
+ - fsl,imx6ul-ocotp
+ - fsl,imx6ull-ocotp
+ - fsl,imx7d-ocotp
+ - fsl,imx6sll-ocotp
+ - fsl,imx7ulp-ocotp
+ - fsl,imx8mq-ocotp
+ - fsl,imx8mm-ocotp
+ - fsl,imx8mn-ocotp
+ - fsl,imx8mp-ocotp
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+ description:
+ Offset and size in bytes within the storage device.
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6sx-clock.h>
+
+ ocotp: efuse@21bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6sx-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
+
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt
deleted file mode 100644
index 372c72fd64dc..000000000000
--- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-On-Chip OTP Memory for Freescale i.MX23/i.MX28
-
-Required properties :
-- compatible :
- - "fsl,imx23-ocotp" for i.MX23
- - "fsl,imx28-ocotp" for i.MX28
-- #address-cells : Should be 1
-- #size-cells : Should be 1
-- reg : Address and length of OTP controller registers
-- clocks : Should contain a reference to the hbus clock
-
-= Data cells =
-Are child nodes of mxs-ocotp, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example for i.MX28:
-
- ocotp: ocotp@8002c000 {
- compatible = "fsl,imx28-ocotp", "fsl,ocotp";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x8002c000 0x2000>;
- clocks = <&clks 25>;
- };
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
new file mode 100644
index 000000000000..ff317fd7c15b
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/mxs-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On-Chip OTP Memory for Freescale i.MX23/i.MX28
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+ - $ref: "nvmem.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-ocotp
+ - fsl,imx28-ocotp
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ ocotp: efuse@8002c000 {
+ compatible = "fsl,imx28-ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8002c000 0x2000>;
+ clocks = <&clks 25>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 65980224d550..b459f9dba6c9 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -67,8 +67,6 @@ patternProperties:
required:
- reg
- additionalProperties: false
-
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
deleted file mode 100644
index 265bdb7dc8aa..000000000000
--- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-= Rockchip eFuse device tree bindings =
-
-Required properties:
-- compatible: Should be one of the following.
- - "rockchip,rk3066a-efuse" - for RK3066a SoCs.
- - "rockchip,rk3188-efuse" - for RK3188 SoCs.
- - "rockchip,rk3228-efuse" - for RK3228 SoCs.
- - "rockchip,rk3288-efuse" - for RK3288 SoCs.
- - "rockchip,rk3328-efuse" - for RK3328 SoCs.
- - "rockchip,rk3368-efuse" - for RK3368 SoCs.
- - "rockchip,rk3399-efuse" - for RK3399 SoCs.
-- reg: Should contain the registers location and exact eFuse size
-- clocks: Should be the clock id of eFuse
-- clock-names: Should be "pclk_efuse"
-
-Optional properties:
-- rockchip,efuse-size: Should be exact eFuse size in byte, the eFuse
- size in property <reg> will be invalid if define this property.
-
-Deprecated properties:
-- compatible: "rockchip,rockchip-efuse"
- Old efuse compatible value compatible to rk3066a, rk3188 and rk3288
- efuses
-
-= Data cells =
-Are child nodes of eFuse, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
- efuse: efuse@ffb40000 {
- compatible = "rockchip,rk3288-efuse";
- reg = <0xffb40000 0x20>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&cru PCLK_EFUSE256>;
- clock-names = "pclk_efuse";
-
- /* Data cells */
- cpu_leakage: cpu_leakage {
- reg = <0x17 0x1>;
- };
- };
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-Example:
-
- cpu_leakage {
- ...
- nvmem-cells = <&cpu_leakage>;
- nvmem-cell-names = "cpu_leakage";
- };
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
new file mode 100644
index 000000000000..3ae00b0b23bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rockchip-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip eFuse device tree bindings
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+ - $ref: "nvmem.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3066a-efuse
+ - rockchip,rk3188-efuse
+ - rockchip,rk3228-efuse
+ - rockchip,rk3288-efuse
+ - rockchip,rk3328-efuse
+ - rockchip,rk3368-efuse
+ - rockchip,rk3399-efuse
+
+ # Deprecated: old compatible value for rk3066a, rk3188 and rk3288
+ - rockchip,rockchip-efuse
+
+ reg:
+ description:
+ Registers location and eFuse size.
+ maxItems: 1
+
+ clocks:
+ description:
+ eFuse clock id.
+ maxItems: 1
+
+ clock-names:
+ const: pclk_efuse
+
+ rockchip,efuse-size:
+ description:
+ eFuse size in bytes. The eFuse size in property <reg> will be invalid if
+ this property is defined.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ efuse: efuse@ffb40000 {
+ compatible = "rockchip,rk3288-efuse";
+ reg = <0xffb40000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE256>;
+ clock-names = "pclk_efuse";
+
+ /* Data cells */
+ cpu_leakage: cpu_leakage@17 {
+ reg = <0x17 0x1>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
index d84deb4774a4..c11c99f085d7 100644
--- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -24,6 +24,18 @@ properties:
- st,stm32f4-otp
- st,stm32mp15-bsec
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ type: object
+
+ properties:
+ st,non-secure-otp:
+ description: |
+ This property explicits a factory programmed area that both secure
+ and non-secure worlds can access. It is needed when, by default, the
+ related area can only be reached by the secure world.
+ type: boolean
+
required:
- "#address-cells"
- "#size-cells"
@@ -41,6 +53,11 @@ examples:
calib@22c {
reg = <0x22c 0x2>;
};
+
+ mac_addr@e4 {
+ reg = <0xe4 0x8>;
+ st,non-secure-otp;
+ };
};
...
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
index ab6e43b636ec..cb4e700c0269 100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -18,8 +18,7 @@ properties:
description:
Set into the no BAR match register to configure the number of least
significant bits kept during inbound (PCIe -> AXI) address translations
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 64
default: 32
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
index 6887ccc339cc..fd3978364da9 100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
@@ -12,8 +12,7 @@ maintainers:
properties:
cdns,max-outbound-regions:
description: maximum number of outbound regions
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 32
default: 32
diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
index 48a98dae00de..64b2c64ca806 100644
--- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -71,10 +71,9 @@ properties:
max-link-speed:
description: Specify PCI Gen for link capability.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 1, 2, 3, 4 ]
- - default: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 3, 4]
+ default: 1
bus-range:
description: Range of bus numbers associated with this controller.
diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml
index b3df100705b0..0f8e575ac01a 100644
--- a/Documentation/devicetree/bindings/pci/pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -18,21 +18,18 @@ properties:
max-functions:
description: Maximum number of functions that can be configured
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
minimum: 1
default: 1
maximum: 255
max-link-speed:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [ 1, 2, 3, 4 ]
num-lanes:
description: maximum number of lanes
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
default: 1
maximum: 16
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index b94078f58d8e..aeba38f0a387 100644
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -6,7 +6,8 @@ AHB. There is one bridge instance per USB port connected to the internal
OHCI and EHCI controllers.
Required properties:
-- compatible: "renesas,pci-r8a7743" for the R8A7743 SoC;
+- compatible: "renesas,pci-r8a7742" for the R8A7742 SoC;
+ "renesas,pci-r8a7743" for the R8A7743 SoC;
"renesas,pci-r8a7744" for the R8A7744 SoC;
"renesas,pci-r8a7745" for the R8A7745 SoC;
"renesas,pci-r8a7790" for the R8A7790 SoC;
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
index 88683db6cf81..18c1ec5e19ad 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
@@ -30,6 +30,6 @@ examples:
- |
mpphy: phy@0 {
compatible = "amlogic,axg-mipi-pcie-analog-phy";
- reg = <0x0 0x0 0x0 0xc>;
+ reg = <0x0 0xc>;
#phy-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
index 086478aec946..45f3d72b1cca 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
@@ -44,7 +44,7 @@ examples:
#include <dt-bindings/phy/phy.h>
pcie_phy: pcie-phy@ff644000 {
compatible = "amlogic,axg-pcie-phy";
- reg = <0x0 0xff644000 0x0 0x1c>;
+ reg = <0xff644000 0x1c>;
resets = <&reset RESET_PCIE_PHY>;
phys = <&mipi_analog_phy PHY_TYPE_PCIE>;
phy-names = "analog";
diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt b/Documentation/devicetree/bindings/phy/calxeda-combophy.txt
deleted file mode 100644
index 6622bdb2e8bc..000000000000
--- a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Calxeda Highbank Combination Phys for SATA
-
-Properties:
-- compatible : Should be "calxeda,hb-combophy"
-- #phy-cells: Should be 1.
-- reg : Address and size for Combination Phy registers.
-- phydev: device ID for programming the combophy.
-
-Example:
-
- combophy5: combo-phy@fff5d000 {
- compatible = "calxeda,hb-combophy";
- #phy-cells = <1>;
- reg = <0xfff5d000 0x1000>;
- phydev = <31>;
- };
-
diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
new file mode 100644
index 000000000000..16a8bd7644bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank Combination PHYs binding for SATA
+
+description: |
+ The Calxeda Combination PHYs connect the SoC to the internal fabric
+ and to SATA connectors. The PHYs support multiple protocols (SATA,
+ SGMII, PCIe) and can be assigned to different devices (SATA or XGMAC
+ controller).
+ Programming the PHYs is typically handled by those device drivers,
+ not by a dedicated PHY driver.
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+ compatible:
+ const: calxeda,hb-combophy
+
+ '#phy-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ phydev:
+ description: device ID for programming the ComboPHY.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - maximum: 31
+
+required:
+ - compatible
+ - reg
+ - phydev
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ combophy5: combo-phy@fff5d000 {
+ compatible = "calxeda,hb-combophy";
+ #phy-cells = <1>;
+ reg = <0xfff5d000 0x1000>;
+ phydev = <31>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 9a346d6290d9..77bb5309918e 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -23,7 +23,7 @@ description: |+
properties:
compatible:
- const: intel,lgm-emmc-phy
+ const: intel,lgm-emmc-phy
"#phy-cells":
const: 0
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index c779a3c7d87a..4071438be2ba 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -77,24 +77,21 @@ patternProperties:
description:
Specifies the type of PHY for which the group of PHY lanes is used.
Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 2, 3, 4, 5, 6]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 3, 4, 5, 6]
cdns,num-lanes:
description:
Number of DisplayPort lanes.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 2, 4]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4]
default: 4
cdns,max-bit-rate:
description:
Maximum DisplayPort link bit rate to use, in Mbps
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
default: 8100
required:
@@ -120,24 +117,30 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/phy/phy.h>
- torrent_phy: torrent-phy@f0fb500000 {
- compatible = "cdns,torrent-phy";
- reg = <0xf0 0xfb500000 0x0 0x00100000>,
- <0xf0 0xfb030a00 0x0 0x00000040>;
- reg-names = "torrent_phy", "dptx_phy";
- resets = <&phyrst 0>;
- clocks = <&ref_clk>;
- clock-names = "refclk";
- #address-cells = <1>;
- #size-cells = <0>;
- torrent_phy_dp: phy@0 {
- reg = <0>;
- resets = <&phyrst 1>, <&phyrst 2>,
- <&phyrst 3>, <&phyrst 4>;
- #phy-cells = <0>;
- cdns,phy-type = <PHY_TYPE_DP>;
- cdns,num-lanes = <4>;
- cdns,max-bit-rate = <8100>;
- };
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ torrent-phy@f0fb500000 {
+ compatible = "cdns,torrent-phy";
+ reg = <0xf0 0xfb500000 0x0 0x00100000>,
+ <0xf0 0xfb030a00 0x0 0x00000040>;
+ reg-names = "torrent_phy", "dptx_phy";
+ resets = <&phyrst 0>;
+ clocks = <&ref_clk>;
+ clock-names = "refclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy@0 {
+ reg = <0>;
+ resets = <&phyrst 1>, <&phyrst 2>,
+ <&phyrst 3>, <&phyrst 4>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_DP>;
+ cdns,num-lanes = <4>;
+ cdns,max-bit-rate = <8100>;
+ };
+ };
};
...
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index f8bd28ff31c1..b5a6195de7ff 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -83,31 +83,28 @@ then:
It is a 6 bit value that specifies offset to be
added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
tuning parameter that may vary for different boards of same SOC.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 63
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 63
+ default: 0
qcom,bias-ctrl-value:
description:
It is a 6 bit value that specifies bias-ctrl-value. It is a PHY
tuning parameter that may vary for different boards of same SOC.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 63
- default: 32
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 63
+ default: 32
qcom,charge-ctrl-value:
- description:
+ description:
It is a 2 bit value that specifies charge-ctrl-value. It is a PHY
tuning parameter that may vary for different boards of same SOC.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 3
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
+ default: 0
qcom,hstx-trim-value:
description:
@@ -115,22 +112,20 @@ then:
output current.
Possible range is - 15mA to 24mA (stepsize of 600 uA).
See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 15
- default: 3
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 3
qcom,preemphasis-level:
description:
It is a 2 bit value that specifies pre-emphasis level.
Possible range is 0 to 15% (stepsize of 5%).
See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 3
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
+ default: 2
qcom,preemphasis-width:
description:
@@ -138,21 +133,19 @@ then:
pre-emphasis (specified using qcom,preemphasis-level) must be in
effect. Duration could be half-bit of full-bit.
See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 1
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 1
+ default: 0
qcom,hsdisc-trim-value:
description:
It is a 2 bit value tuning parameter that control disconnect
threshold and may vary for different boards of same SOC.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 3
- default: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
+ default: 0
required:
- compatible
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
index ac96d6481bb8..a3bd1c4499b7 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -4,7 +4,8 @@ This file provides information on what the device node for the R-Car generation
2 USB PHY contains.
Required properties:
-- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
+- compatible: "renesas,usb-phy-r8a7742" if the device is a part of R8A7742 SoC.
+ "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
"renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
"renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
"renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC.
diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
index 72aca81e8959..8a3032a3bd73 100644
--- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
@@ -59,7 +59,7 @@ examples:
- |
dsi_dphy: phy@ff2e0000 {
compatible = "rockchip,px30-dsi-dphy";
- reg = <0x0 0xff2e0000 0x0 0x10000>;
+ reg = <0xff2e0000 0x10000>;
clocks = <&pmucru 13>, <&cru 12>;
clock-names = "ref", "pclk";
resets = <&cru 12>;
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
new file mode 100644
index 000000000000..86f49093b65f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe PHY
+
+description: |
+ This describes the devicetree bindings for PHY interface built into
+ PCIe controller implemented on Socionext UniPhier SoCs.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pro5-pcie-phy
+ - socionext,uniphier-ld20-pcie-phy
+ - socionext,uniphier-pxs3-pcie-phy
+
+ reg:
+ description: PHY register region (offset and length)
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ oneOf:
+ - items: # for Pro5
+ - const: gio
+ - const: link
+ - const: link # for others
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ oneOf:
+ - items: # for Pro5
+ - const: gio
+ - const: link
+ - const: link # for others
+
+ socionext,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to system control to set configurations for phy
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ pcie_phy: phy@66038000 {
+ compatible = "socionext,uniphier-ld20-pcie-phy";
+ reg = <0x66038000 0x4000>;
+ #phy-cells = <0>;
+ clock-names = "link";
+ clocks = <&sys_clk 24>;
+ reset-names = "link";
+ resets = <&sys_rst 24>;
+ socionext,syscon = <&soc_glue>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
new file mode 100644
index 000000000000..479b203f7aa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier USB2 PHY
+
+description: |
+ This describes the devicetree bindings for PHY interface built into
+ USB2 controller implemented on Socionext UniPhier SoCs.
+ Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3
+ controller doesn't include its own High-Speed PHY. This needs to specify
+ USB2 PHY instead of USB3 HS-PHY.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pro4-usb2-phy
+ - socionext,uniphier-ld11-usb2-phy
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^phy@[0-9]+$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 3
+ description:
+ The ID number for the PHY
+
+ "#phy-cells":
+ const: 0
+
+ required:
+ - reg
+ - "#phy-cells"
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node.
+
+ soc-glue@5f800000 {
+ compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon";
+ reg = <0x5f800000 0x2000>;
+
+ usb-controller {
+ compatible = "socionext,uniphier-ld11-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
new file mode 100644
index 000000000000..f88d36207b87
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier USB3 High-Speed (HS) PHY
+
+description: |
+ This describes the devicetree bindings for PHY interfaces built into
+ USB3 controller implemented on Socionext UniPhier SoCs.
+ Although the controller includes High-Speed PHY and Super-Speed PHY,
+ this describes about High-Speed PHY.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pro5-usb3-hsphy
+ - socionext,uniphier-pxs2-usb3-hsphy
+ - socionext,uniphier-ld20-usb3-hsphy
+ - socionext,uniphier-pxs3-usb3-hsphy
+
+ reg:
+ description: PHY register region (offset and length)
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ oneOf:
+ - const: link # for PXs2
+ - items: # for PXs3
+ - const: link
+ - const: phy
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: link
+ - const: phy
+
+ vbus-supply:
+ description: A phandle to the regulator for USB VBUS
+
+ nvmem-cells:
+ maxItems: 3
+ description:
+ Phandles to nvmem cell that contains the trimming data.
+ Available only for HS-PHY implemented on LD20 and PXs3, and
+ if unspecified, default value is used.
+
+ nvmem-cell-names:
+ items:
+ - const: rterm
+ - const: sel_t
+ - const: hs_i
+ description:
+ Should be the following names, which correspond to each nvmem-cells.
+ All of the 3 parameters associated with the above names are
+ required for each port, if any one is omitted, the trimming data
+ of the port will not be set at all.
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
new file mode 100644
index 000000000000..edff2c95c9ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier USB3 Super-Speed (SS) PHY
+
+description: |
+ This describes the devicetree bindings for PHY interfaces built into
+ USB3 controller implemented on Socionext UniPhier SoCs.
+ Although the controller includes High-Speed PHY and Super-Speed PHY,
+ this describes about Super-Speed PHY.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pro4-usb3-ssphy
+ - socionext,uniphier-pro5-usb3-ssphy
+ - socionext,uniphier-pxs2-usb3-ssphy
+ - socionext,uniphier-ld20-usb3-ssphy
+ - socionext,uniphier-pxs3-usb3-ssphy
+
+ reg:
+ description: PHY register region (offset and length)
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ oneOf:
+ - items: # for Pro4, Pro5
+ - const: gio
+ - const: link
+ - items: # for PXs3 with phy-ext
+ - const: link
+ - const: phy
+ - const: phy-ext
+ - items: # for others
+ - const: link
+ - const: phy
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ oneOf:
+ - items: # for Pro4,Pro5
+ - const: gio
+ - const: link
+ - items: # for others
+ - const: link
+ - const: phy
+
+ vbus-supply:
+ description: A phandle to the regulator for USB VBUS
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - vbus-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt
deleted file mode 100644
index 3cee372c5742..000000000000
--- a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Socionext UniPhier PCIe PHY bindings
-
-This describes the devicetree bindings for PHY interface built into
-PCIe controller implemented on Socionext UniPhier SoCs.
-
-Required properties:
-- compatible: Should contain one of the following:
- "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY
- "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY
- "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY
-- reg: Specifies offset and length of the register set for the device.
-- #phy-cells: Must be zero.
-- clocks: A list of phandles to the clock gate for PCIe glue layer
- including this phy.
-- clock-names: For Pro5 only, should contain the following:
- "gio", "link" - for Pro5 SoC
-- resets: A list of phandles to the reset line for PCIe glue layer
- including this phy.
-- reset-names: For Pro5 only, should contain the following:
- "gio", "link" - for Pro5 SoC
-
-Optional properties:
-- socionext,syscon: A phandle to system control to set configurations
- for phy.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
- pcie_phy: phy@66038000 {
- compatible = "socionext,uniphier-ld20-pcie-phy";
- reg = <0x66038000 0x4000>;
- #phy-cells = <0>;
- clocks = <&sys_clk 24>;
- resets = <&sys_rst 24>;
- socionext,syscon = <&soc_glue>;
- };
diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt
deleted file mode 100644
index b43b28250cc0..000000000000
--- a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Socionext UniPhier USB2 PHY
-
-This describes the devicetree bindings for PHY interface built into
-USB2 controller implemented on Socionext UniPhier SoCs.
-
-Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3
-controller doesn't include its own High-Speed PHY. This needs to specify
-USB2 PHY instead of USB3 HS-PHY.
-
-Required properties:
-- compatible: Should contain one of the following:
- "socionext,uniphier-pro4-usb2-phy" - for Pro4 SoC
- "socionext,uniphier-ld11-usb2-phy" - for LD11 SoC
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes required properties:
-- #phy-cells: Should be 0.
-- reg: The number of the PHY.
-
-Sub-nodes optional properties:
-- vbus-supply: A phandle to the regulator for USB VBUS.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
- soc-glue@5f800000 {
- ...
- usb-phy {
- compatible = "socionext,uniphier-ld11-usb2-phy";
- usb_phy0: phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- ...
- };
- };
-
- usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- ...
- phy-names = "usb";
- phys = <&usb_phy0>;
- };
diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt
deleted file mode 100644
index 093d4f08705f..000000000000
--- a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-Socionext UniPhier USB3 High-Speed (HS) PHY
-
-This describes the devicetree bindings for PHY interfaces built into
-USB3 controller implemented on Socionext UniPhier SoCs.
-Although the controller includes High-Speed PHY and Super-Speed PHY,
-this describes about High-Speed PHY.
-
-Required properties:
-- compatible: Should contain one of the following:
- "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC
- "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC
- "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC
- "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- #phy-cells: Should be 0.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
- According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain the following:
- "gio", "link" - for Pro5 SoC
- "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
- "phy", "link" - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
- According to the reset-names, appropriate resets are required.
-- reset-names: Should contain the following:
- "gio", "link" - for Pro5 SoC
- "phy", "link" - for others
-
-Optional properties:
-- vbus-supply: A phandle to the regulator for USB VBUS.
-- nvmem-cells: Phandles to nvmem cell that contains the trimming data.
- Available only for HS-PHY implemented on LD20 and PXs3, and
- if unspecified, default value is used.
-- nvmem-cell-names: Should be the following names, which correspond to
- each nvmem-cells.
- All of the 3 parameters associated with the following names are
- required for each port, if any one is omitted, the trimming data
- of the port will not be set at all.
- "rterm", "sel_t", "hs_i" - Each cell name for phy parameters
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-
- usb-glue@65b00000 {
- compatible = "socionext,uniphier-ld20-dwc3-glue",
- "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x65b00000 0x400>;
-
- usb_vbus0: regulator {
- ...
- };
-
- usb_hsphy0: hs-phy@200 {
- compatible = "socionext,uniphier-ld20-usb3-hsphy";
- reg = <0x200 0x10>;
- #phy-cells = <0>;
- clock-names = "link", "phy";
- clocks = <&sys_clk 14>, <&sys_clk 16>;
- reset-names = "link", "phy";
- resets = <&sys_rst 14>, <&sys_rst 16>;
- vbus-supply = <&usb_vbus0>;
- nvmem-cell-names = "rterm", "sel_t", "hs_i";
- nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
- <&usb_hs_i0>;
- };
- ...
- };
diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt
deleted file mode 100644
index 9df2bc2f5999..000000000000
--- a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Socionext UniPhier USB3 Super-Speed (SS) PHY
-
-This describes the devicetree bindings for PHY interfaces built into
-USB3 controller implemented on Socionext UniPhier SoCs.
-Although the controller includes High-Speed PHY and Super-Speed PHY,
-this describes about Super-Speed PHY.
-
-Required properties:
-- compatible: Should contain one of the following:
- "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC
- "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC
- "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC
- "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC
- "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- #phy-cells: Should be 0.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
- According to the clock-names, appropriate clocks are required.
-- clock-names:
- "gio", "link" - for Pro4 and Pro5 SoC
- "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
- "phy", "link" - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
- According to the reset-names, appropriate resets are required.
-- reset-names:
- "gio", "link" - for Pro4 and Pro5 SoC
- "phy", "link" - for others
-
-Optional properties:
-- vbus-supply: A phandle to the regulator for USB VBUS.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-
- usb-glue@65b00000 {
- compatible = "socionext,uniphier-ld20-dwc3-glue",
- "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x65b00000 0x400>;
-
- usb_vbus0: regulator {
- ...
- };
-
- usb_ssphy0: ss-phy@300 {
- compatible = "socionext,uniphier-ld20-usb3-ssphy";
- reg = <0x300 0x10>;
- #phy-cells = <0>;
- clock-names = "link", "phy";
- clocks = <&sys_clk 14>, <&sys_clk 16>;
- reset-names = "link", "phy";
- resets = <&sys_rst 14>, <&sys_rst 16>;
- vbus-supply = <&usb_vbus0>;
- };
- ...
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index bfefd09d8c1e..7556be6e2754 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -84,13 +84,12 @@ properties:
gpio-line-names: true
input-debounce:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 5
description:
Debouncing periods in microseconds, one period per interrupt
bank found in the controller
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 5
patternProperties:
# It's pretty scary, but the basic idea is that:
@@ -115,9 +114,8 @@ patternProperties:
bias-pull-down: true
drive-strength:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 10, 20, 30, 40 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [10, 20, 30, 40]
required:
- pins
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 7651a675ab2d..017d9593573b 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -33,26 +33,23 @@ patternProperties:
then:
patternProperties:
"^function|groups$":
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/string"
- - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
- ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
- DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2,
- GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12,
- I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD,
- LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1,
- NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
- NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2,
- NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3,
- PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16,
- ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4,
- SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
- SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
- SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG,
- SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7,
- TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1,
- USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30,
- VPO12, VPO24, WDTRST1, WDTRST2 ]
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+ ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+ EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
+ GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
+ I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
+ MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
+ NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
+ NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
+ PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+ RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
+ RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
+ SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
+ SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
+ SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
+ TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
+ VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 36feaf5e2dff..c643d6d44415 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -29,8 +29,7 @@ properties:
aspeed,external-nodes:
minItems: 2
maxItems: 2
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: |
A cell of phandles to external controller nodes:
0: compatible with "aspeed,ast2500-gfx", "syscon"
@@ -43,28 +42,25 @@ patternProperties:
then:
patternProperties:
"^function|groups$":
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/string"
- - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
- ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
- DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4,
- GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13,
- I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1,
- LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST,
- LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2,
- NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
- NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
- NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2,
- PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1,
- RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
- SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
- SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI,
- SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1,
- SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO,
- SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1,
- TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD,
- USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1,
- WDTRST2, ]
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+ ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+ ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
+ GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
+ I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
+ LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
+ MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
+ NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
+ NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
+ PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+ RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
+ SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
+ SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+ SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
+ SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
+ TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
+ USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
+ VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
required:
- compatible
@@ -125,7 +121,7 @@ examples:
lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
- reg = <0x20 0x24 0x48 0x8>;
+ reg = <0x20 0x24>, <0x48 0x8>;
};
};
};
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 45af29bc3202..1506726c7fea 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -30,64 +30,58 @@ patternProperties:
then:
properties:
function:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/string"
- - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
- ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,
- ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,
- GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
- GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,
- I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,
- I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
- LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
- MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
- NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
- NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
- NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
- PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7,
- PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
- RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
- SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
- SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,
- SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
- SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
- TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
- TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
- THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
- UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
- USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
- WDTRST4, ]
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+ ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
+ FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
+ GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
+ GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
+ I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
+ I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
+ MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
+ NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
+ NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
+ NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
+ PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
+ PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+ RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
+ SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
+ SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
+ SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+ SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
+ TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
+ THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
+ UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
+ USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4]
+
groups:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/string"
- - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
- ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,
- EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,
- FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,
- GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,
- GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,
- I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,
- I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,
- LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,
- MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,
- NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
- NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
- OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,
- PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,
- PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,
- PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,
- RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,
- SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,
- SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,
- SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,
- SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
- SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
- SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
- TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
- TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
- THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
- UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA,
- USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+ ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
+ EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+ GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+ GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
+ I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
+ I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+ LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
+ MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
+ NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+ NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+ OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
+ PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
+ PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
+ QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+ RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
+ SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
+ SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
+ SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
+ SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
+ SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+ TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
+ TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
+ TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
+ UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+ WDTRST3, WDTRST4]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
deleted file mode 100644
index a87447180e83..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the pinctrl portion
-of the driver.
-
-Also see these documents for generic binding information:
- [1] GPIO : ../gpio/gpio.txt
- [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
-
-And these for relevant defines:
- [3] include/dt-bindings/pinctrl/lochnagar.h
-
-This binding must be part of the Lochnagar MFD binding:
- [4] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
- - compatible : One of the following strings:
- "cirrus,lochnagar-pinctrl"
-
- - gpio-controller : Indicates this device is a GPIO controller.
- - #gpio-cells : Must be 2. The first cell is the pin number, see
- [3] for available pins and the second cell is used to specify
- optional parameters, see [1].
- - gpio-ranges : Range of pins managed by the GPIO controller, see
- [1]. Both the GPIO and Pinctrl base should be set to zero and the
- count to the appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define,
- see [3].
-
- - pinctrl-names : A pinctrl state named "default" must be defined.
- - pinctrl-0 : A phandle to the default pinctrl state.
-
-Required sub-nodes:
-
-The pin configurations are defined as a child of the pinctrl states
-node, see [2]. Each sub-node can have the following properties:
- - groups : A list of groups to select (either this or "pins" must be
- specified), available groups:
- codec-aif1, codec-aif2, codec-aif3, dsp-aif1, dsp-aif2, psia1,
- psia2, gf-aif1, gf-aif2, gf-aif3, gf-aif4, spdif-aif, usb-aif1,
- usb-aif2, adat-aif, soundcard-aif
- - pins : A list of pin names to select (either this or "groups" must
- be specified), available pins:
- fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
- fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
- codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
- dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
- gf-gpio3, gf-gpio7, codec-aif1-bclk, codec-aif1-rxdat,
- codec-aif1-lrclk, codec-aif1-txdat, codec-aif2-bclk,
- codec-aif2-rxdat, codec-aif2-lrclk, codec-aif2-txdat,
- codec-aif3-bclk, codec-aif3-rxdat, codec-aif3-lrclk,
- codec-aif3-txdat, dsp-aif1-bclk, dsp-aif1-rxdat, dsp-aif1-lrclk,
- dsp-aif1-txdat, dsp-aif2-bclk, dsp-aif2-rxdat,
- dsp-aif2-lrclk, dsp-aif2-txdat, psia1-bclk, psia1-rxdat,
- psia1-lrclk, psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
- psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat, gf-aif3-lrclk,
- gf-aif3-txdat, gf-aif4-bclk, gf-aif4-rxdat, gf-aif4-lrclk,
- gf-aif4-txdat, gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
- gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat, gf-aif2-lrclk,
- gf-aif2-txdat, dsp-uart1-rx, dsp-uart1-tx, dsp-uart2-rx,
- dsp-uart2-tx, gf-uart2-rx, gf-uart2-tx, usb-uart-rx,
- codec-pdmclk1, codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
- codec-dmicclk1, codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
- codec-dmicclk3, codec-dmicdat3, codec-dmicclk4, codec-dmicdat4,
- dsp-dmicclk1, dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
- i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, dsp-standby,
- codec-mclk1, codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
- gf-gpio1, gf-gpio5, dsp-gpio20, led1, led2
- - function : The mux function to select, available functions:
- aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
- fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
- codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
- dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
- gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5, dsp-gpio20, codec-clkout,
- dsp-clkout, pmic-32k, spdif-clkout, clk-12m288, clk-11m2986,
- clk-24m576, clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
- gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1, codec-mclk2,
- dsp-clkin, psia1-mclk, psia2-mclk, spdif-mclk, codec-irq,
- codec-reset, dsp-reset, dsp-irq, dsp-standby, codec-pdmclk1,
- codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
- codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, codec-dmicclk3,
- codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
- dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
- dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, gf-uart2-rx,
- gf-uart2-tx, usb-uart-rx, usb-uart-tx, i2c2-scl, i2c2-sda,
- i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, spdif-aif, psia1,
- psia1-bclk, psia1-lrclk, psia1-rxdat, psia1-txdat, psia2,
- psia2-bclk, psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
- codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
- codec-aif1-txdat, codec-aif2, codec-aif2-bclk, codec-aif2-lrclk,
- codec-aif2-rxdat, codec-aif2-txdat, codec-aif3, codec-aif3-bclk,
- codec-aif3-lrclk, codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
- dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat, dsp-aif1-txdat,
- dsp-aif2, dsp-aif2-bclk, dsp-aif2-lrclk, dsp-aif2-rxdat,
- dsp-aif2-txdat, gf-aif3, gf-aif3-bclk, gf-aif3-lrclk,
- gf-aif3-rxdat, gf-aif3-txdat, gf-aif4, gf-aif4-bclk,
- gf-aif4-lrclk, gf-aif4-rxdat, gf-aif4-txdat, gf-aif1,
- gf-aif1-bclk, gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat,
- gf-aif2, gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
- gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif, soundcard-aif,
-
- - output-enable : Specifies that an AIF group will be used as a master
- interface (either this or input-enable is required if a group is
- being muxed to an AIF)
- - input-enable : Specifies that an AIF group will be used as a slave
- interface (either this or output-enable is required if a group is
- being muxed to an AIF)
-
-Example:
-
-lochnagar-pinctrl {
- compatible = "cirrus,lochnagar-pinctrl";
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pin-settings>;
-
- pin-settings: pin-settings {
- ap-aif {
- input-enable;
- groups = "gf-aif1";
- function = "codec-aif3";
- };
- codec-aif {
- output-enable;
- groups = "codec-aif3";
- function = "gf-aif1";
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..420d74856032
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of various
+ application processor systems to provide a full evaluation platform.
+ Audio system topology, clocking and power can all be controlled through
+ the Lochnagar, allowing the device under test to be used in a variety of
+ possible use cases.
+
+ This binding document describes the binding for the pinctrl portion of
+ the driver.
+
+ Also see these documents for generic binding information:
+ [1] GPIO : ../gpio/gpio.txt
+ [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
+
+ And these for relevant defines:
+ [3] include/dt-bindings/pinctrl/lochnagar.h
+
+ This binding must be part of the Lochnagar MFD binding:
+ [4] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number and the second cell is used
+ to specify optional parameters.
+ const: 2
+
+ gpio-ranges:
+ description:
+ Range of pins managed by the GPIO controller, see [1]. Both the
+ GPIO and Pinctrl base should be set to zero and the count to the
+ appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
+ maxItems: 1
+
+ pinctrl-0:
+ description:
+ A phandle to the default pinctrl state.
+
+ pinctrl-names:
+ description:
+ A pinctrl state named "default" must be defined.
+ const: default
+
+ pin-settings:
+ type: object
+ patternProperties:
+ '-pins$':
+ description:
+ The pin configurations are defined as a child of the pinctrl
+ states node, see [2]. Each sub-node can have the following
+ properties.
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description:
+ A list of groups to select (either this or "pins" must be
+ specified), available groups.
+ enum: [ codec-aif1, codec-aif2, codec-aif3, dsp-aif1,
+ dsp-aif2, psia1, psia2, gf-aif1, gf-aif2, gf-aif3,
+ gf-aif4, spdif-aif, usb-aif1, usb-aif2, adat-aif,
+ soundcard-aif ]
+
+ pins:
+ description:
+ A list of pin names to select (either this or "groups" must
+ be specified), available pins.
+ enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+ fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+ codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+ codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+ dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+ gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk,
+ codec-aif1-rxdat, codec-aif1-lrclk, codec-aif1-txdat,
+ codec-aif2-bclk, codec-aif2-rxdat, codec-aif2-lrclk,
+ codec-aif2-txdat, codec-aif3-bclk, codec-aif3-rxdat,
+ codec-aif3-lrclk, codec-aif3-txdat, dsp-aif1-bclk,
+ dsp-aif1-rxdat, dsp-aif1-lrclk, dsp-aif1-txdat,
+ dsp-aif2-bclk, dsp-aif2-rxdat, dsp-aif2-lrclk,
+ dsp-aif2-txdat, psia1-bclk, psia1-rxdat, psia1-lrclk,
+ psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
+ psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat,
+ gf-aif3-lrclk, gf-aif3-txdat, gf-aif4-bclk,
+ gf-aif4-rxdat, gf-aif4-lrclk, gf-aif4-txdat,
+ gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
+ gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat,
+ gf-aif2-lrclk, gf-aif2-txdat, dsp-uart1-rx,
+ dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+ gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1,
+ codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
+ codec-dmicclk1, codec-dmicdat1, codec-dmicclk2,
+ codec-dmicdat2, codec-dmicclk3, codec-dmicdat3,
+ codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
+ dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
+ i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda,
+ dsp-standby, codec-mclk1, codec-mclk2, dsp-clkin,
+ psia1-mclk, psia2-mclk, gf-gpio1, gf-gpio5,
+ dsp-gpio20, led1, led2 ]
+
+ function:
+ description:
+ The mux function to select, available functions.
+ enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+ fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+ codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+ codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+ dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+ gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5,
+ dsp-gpio20, codec-clkout, dsp-clkout, pmic-32k,
+ spdif-clkout, clk-12m288, clk-11m2986, clk-24m576,
+ clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
+ gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1,
+ codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
+ spdif-mclk, codec-irq, codec-reset, dsp-reset,
+ dsp-irq, dsp-standby, codec-pdmclk1, codec-pdmdat1,
+ codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
+ codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
+ codec-dmicclk3, codec-dmicdat3, codec-dmicclk4,
+ codec-dmicdat4, dsp-dmicclk1, dsp-dmicdat1,
+ dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
+ dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+ gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx,
+ i2c2-scl, i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl,
+ i2c4-sda, spdif-aif, psia1, psia1-bclk, psia1-lrclk,
+ psia1-rxdat, psia1-txdat, psia2, psia2-bclk,
+ psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
+ codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
+ codec-aif1-txdat, codec-aif2, codec-aif2-bclk,
+ codec-aif2-lrclk, codec-aif2-rxdat, codec-aif2-txdat,
+ codec-aif3, codec-aif3-bclk, codec-aif3-lrclk,
+ codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
+ dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat,
+ dsp-aif1-txdat, dsp-aif2, dsp-aif2-bclk,
+ dsp-aif2-lrclk, dsp-aif2-rxdat, dsp-aif2-txdat,
+ gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, gf-aif3-rxdat,
+ gf-aif3-txdat, gf-aif4, gf-aif4-bclk, gf-aif4-lrclk,
+ gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, gf-aif1-bclk,
+ gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, gf-aif2,
+ gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
+ gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif,
+ soundcard-aif ]
+
+ output-enable:
+ description:
+ Specifies that an AIF group will be used as a master
+ interface (either this or input-enable is required if a
+ group is being muxed to an AIF)
+
+ input-enable:
+ description:
+ Specifies that an AIF group will be used as a slave
+ interface (either this or output-enable is required if a
+ group is being muxed to an AIF)
+
+ additionalProperties: false
+
+ required:
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - pinctrl-0
+ - pinctrl-names
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
deleted file mode 100644
index b0e36cf0d289..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Cirrus Logic Madera class audio codecs pinctrl driver
-
-The Cirrus Logic Madera codecs provide a number of GPIO functions for
-interfacing to external hardware and to provide logic outputs to other devices.
-Certain groups of GPIO pins also have an alternate function, normally as an
-audio interface.
-
-The set of available GPIOs, functions and alternate function groups differs
-between codecs so refer to the datasheet for the codec for further information
-on what is supported on that device.
-
-The properties for this driver exist within the parent MFD driver node.
-
-See also
- the core bindings for the parent MFD driver:
- Documentation/devicetree/bindings/mfd/madera.txt
-
- the generic pinmix bindings:
- Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Required properties of parent mfd node:
- - pinctrl-names : must be "default"
- - pinctrl-0 : a phandle to the node containing the subnodes containing default
- configurations
-
-Required subnodes:
- One subnode is required to contain the default settings. It contains an
- arbitrary number of configuration subnodes, one for each group or pin
- configuration you want to apply as a default.
-
-Required properties of configuration subnodes:
- - groups : name of one pin group to configure. One of:
- aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2,
- dmic4, dmic5, dmic6,
- gpio1, gpio2, ..., gpio40
- The gpioN groups select the single pin of this name for configuration
-
-Optional properties of configuration subnodes:
- Any configuration option not explicitly listed in the dts will be left at
- chip default setting.
-
- - function : name of function to assign to this group. One of:
- aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2,
- dmic3, dmic4, dmic5, dmic6,
- io, dsp-gpio, irq1, irq2,
- fll1-clk, fll1-lock, fll2-clk, fll2-lock, fll3-clk, fll3-lock,
- fllao-clk, fllao-lock,
- opclk, opclk-async, pwm1, pwm2, spdif,
- asrc1-in1-lock, asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
- spkl-short-circuit, spkr-short-circuit, spk-shutdown,
- spk-overheat-shutdown, spk-overheat-warn,
- timer1-sts, timer2-sts, timer3-sts, timer4-sts, timer5-sts, timer6-sts,
- timer7-sts, timer8-sts,
- log1-fifo-ne, log2-fifo-ne, log3-fifo-ne, log4-fifo-ne, log5-fifo-ne,
- log6-fifo-ne, log7-fifo-ne, log8-fifo-ne,
-
- - bias-disable : disable pull-up and pull-down
- - bias-bus-hold : enable buskeeper
- - bias-pull-up : output is pulled-up
- - bias-pull-down : output is pulled-down
- - drive-push-pull : CMOS output
- - drive-open-drain : open-drain output
- - drive-strength : drive strength in mA. Valid values are 4 or 8
- - input-schmitt-enable : enable schmitt-trigger mode
- - input-schmitt-disable : disable schmitt-trigger mode
- - input-debounce : A value of 0 disables debounce, a value !=0 enables
- debounce
- - output-low : set the pin to output mode with low level
- - output-high : set the pin to output mode with high level
-
-Example:
-
-cs47l85@0 {
- compatible = "cirrus,cs47l85";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cs47l85_defaults>;
-
- cs47l85_defaults: cs47l85-gpio-defaults {
- aif1 {
- groups = "aif1";
- function = "aif1";
- bias-bus-hold;
- };
-
- aif2 {
- groups = "aif2";
- function = "aif2";
- bias-bus-hold;
- };
-
- opclk {
- groups = "gpio1";
- function = "opclk";
- bias-pull-up;
- drive-strength = <8>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
new file mode 100644
index 000000000000..6bfc25d0e1b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs pinctrl driver
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ The Cirrus Logic Madera codecs provide a number of GPIO functions for
+ interfacing to external hardware and to provide logic outputs to other devices.
+ Certain groups of GPIO pins also have an alternate function, normally as an
+ audio interface.
+
+ The set of available GPIOs, functions and alternate function groups differs
+ between CODECs so refer to the datasheet for the CODEC for further information
+ on what is supported on that device.
+
+ The properties for this driver exist within the parent MFD driver node.
+
+ See also the core bindings for the parent MFD driver:
+
+ Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+
+ And the generic pinmix bindings:
+
+ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+properties:
+ pinctrl-0:
+ description:
+ A phandle to the node containing the subnodes containing default
+ configurations.
+
+ pinctrl-names:
+ description:
+ A pinctrl state named "default" must be defined.
+ const: default
+
+ pin-settings:
+ description:
+ One subnode is required to contain the default settings. It
+ contains an arbitrary number of configuration subnodes, one for
+ each group or pin configuration you want to apply as a default.
+ type: object
+ patternProperties:
+ '-pins$':
+ type: object
+ allOf:
+ - $ref: "pincfg-node.yaml#"
+ - $ref: "pinmux-node.yaml#"
+ properties:
+ groups:
+ description:
+ Name of one pin group to configure.
+ enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1,
+ pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3,
+ gpio4, gpio5, gpio6, gpio7, gpio7, gpio8, gpio9,
+ gpio10, gpio11, gpio12, gpio13, gpio14, gpio15,
+ gpio16, gpio17, gpio17, gpio18, gpio19, gpio20,
+ gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
+ gpio27, gpio27, gpio28, gpio29, gpio30, gpio31,
+ gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
+ gpio37, gpio38, gpio39 ]
+
+ function:
+ description:
+ Name of function to assign to this group.
+ enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3,
+ pdmspk1, pdmspk2, dmic3, dmic4, dmic5,
+ dmic6, io, dsp-gpio, irq1, irq2, fll1-clk,
+ fll1-lock, fll2-clk, fll2-lock, fll3-clk,
+ fll3-lock, fllao-clk, fllao-lock, opclk,
+ opclk-async, pwm1, pwm2, spdif, asrc1-in1-lock,
+ asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
+ spkl-short-circuit, spkr-short-circuit,
+ spk-shutdown, spk-overheat-shutdown,
+ spk-overheat-warn, timer1-sts, timer2-sts,
+ timer3-sts, timer4-sts, timer5-sts, timer6-sts,
+ timer7-sts, timer8-sts, log1-fifo-ne,
+ log2-fifo-ne, log3-fifo-ne, log4-fifo-ne,
+ log5-fifo-ne, log6-fifo-ne, log7-fifo-ne,
+ log8-fifo-ne ]
+
+ bias-disable: true
+
+ bias-bus-hold: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ drive-push-pull: true
+
+ drive-open-drain: true
+
+ drive-strength:
+ enum: [ 4, 8 ]
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ input-debounce: true
+
+ output-low: true
+
+ output-high: true
+
+ additionalProperties: false
+
+ required:
+ - groups
+
+ additionalProperties: false
+
+required:
+ - pinctrl-0
+ - pinctrl-names
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
index d98a3866add8..6d7d162e6171 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
@@ -37,22 +37,21 @@ patternProperties:
be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last
integer CONFIG is the pad setting value like pull-up on this pin. Please
refer to i.MX8M Mini Reference Manual for detailed CONFIG settings.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-matrix
- - items:
- items:
- - description: |
- "mux_reg" indicates the offset of mux register.
- - description: |
- "conf_reg" indicates the offset of pad configuration register.
- - description: |
- "input_reg" indicates the offset of select input register.
- - description: |
- "mux_val" indicates the mux value to be applied.
- - description: |
- "input_val" indicates the select input value to be applied.
- - description: |
- "pad_setting" indicates the pad configuration value to be applied.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
required:
- fsl,pins
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
index b9aa180e07e4..7131cfd1fc45 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
@@ -37,22 +37,21 @@ patternProperties:
be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last
integer CONFIG is the pad setting value like pull-up on this pin. Please
refer to i.MX8M Nano Reference Manual for detailed CONFIG settings.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-matrix
- - items:
- items:
- - description: |
- "mux_reg" indicates the offset of mux register.
- - description: |
- "conf_reg" indicates the offset of pad configuration register.
- - description: |
- "input_reg" indicates the offset of select input register.
- - description: |
- "mux_val" indicates the mux value to be applied.
- - description: |
- "input_val" indicates the select input value to be applied.
- - description: |
- "pad_setting" indicates the pad configuration value to be applied.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
required:
- fsl,pins
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
index 6297e78418cf..d474bc1f393b 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
@@ -37,22 +37,21 @@ patternProperties:
be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
integer CONFIG is the pad setting value like pull-up on this pin. Please
refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-matrix
- - items:
- items:
- - description: |
- "mux_reg" indicates the offset of mux register.
- - description: |
- "conf_reg" indicates the offset of pad configuration register.
- - description: |
- "input_reg" indicates the offset of select input register.
- - description: |
- "mux_val" indicates the mux value to be applied.
- - description: |
- "input_val" indicates the select input value to be applied.
- - description: |
- "pad_setting" indicates the pad configuration value to be applied.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
required:
- fsl,pins
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
index b30c704fcfa1..0af2b6c95c17 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
@@ -37,22 +37,21 @@ patternProperties:
be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last
integer CONFIG is the pad setting value like pull-up on this pin. Please
refer to i.MX8M Quad Reference Manual for detailed CONFIG settings.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-matrix
- - items:
- items:
- - description: |
- "mux_reg" indicates the offset of mux register.
- - description: |
- "conf_reg" indicates the offset of pad configuration register.
- - description: |
- "input_reg" indicates the offset of select input register.
- - description: |
- "mux_val" indicates the mux value to be applied.
- - description: |
- "input_val" indicates the select input value to be applied.
- - description: |
- "pad_setting" indicates the pad configuration value to be applied.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
required:
- fsl,pins
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
index cd2b436350ef..2c0acb405e6c 100644
--- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
@@ -24,12 +24,10 @@ properties:
patternProperties:
'-pins$':
type: object
- allOf:
- - $ref: pincfg-node.yaml#
- - $ref: pinmux-node.yaml#
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
+ $ref: pinmux-node.yaml#
properties:
function: true
diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
index 732d9075560b..ef8877ddb1eb 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
@@ -122,11 +122,10 @@ properties:
this, "pins" or "pinmux" has to be specified)
pinmux:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
description:
The list of numeric pin ids and their mux settings that properties in the
node apply to (either this, "pins" or "groups" have to be specified)
+ $ref: /schemas/types.yaml#/definitions/uint32-array
pinctrl-pin-array:
$ref: /schemas/types.yaml#/definitions/uint32-array
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index 63d1cfe86c6e..b2de3992d484 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -49,8 +49,7 @@ patternProperties:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
- allOf:
- - $ref: "/schemas/pinctrl/pincfg-node.yaml"
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
pins:
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index 46a0478cb924..1f6e51891ddc 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -37,21 +37,18 @@ properties:
hwlocks: true
st,syscfg:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
description: Should be phandle/offset/mask
- Phandle to the syscon node which includes IRQ mux selection.
- The offset of the IRQ mux selection register.
- The field mask of IRQ mux, needed if different of 0xf.
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
st,package:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 2, 4, 8]
description:
Indicates the SOC package used.
More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
-
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8]
patternProperties:
'^gpio@[0-9a-f]*$':
@@ -78,33 +75,30 @@ patternProperties:
maximum: 16
st,bank-name:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/string"
- - enum:
- - GPIOA
- - GPIOB
- - GPIOC
- - GPIOD
- - GPIOE
- - GPIOF
- - GPIOG
- - GPIOH
- - GPIOI
- - GPIOJ
- - GPIOK
- - GPIOZ
description:
Should be a name string for this bank as specified in the datasheet.
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum:
+ - GPIOA
+ - GPIOB
+ - GPIOC
+ - GPIOD
+ - GPIOE
+ - GPIOF
+ - GPIOG
+ - GPIOH
+ - GPIOI
+ - GPIOJ
+ - GPIOK
+ - GPIOZ
st,bank-ioport:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- - maximum: 11
-
description:
Should correspond to the EXTI IOport selection (EXTI line used
to select GPIOs as interrupts).
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 11
required:
- gpio-controller
@@ -125,8 +119,7 @@ patternProperties:
configuration, pullups, drive, output high/low and output speed.
properties:
pinmux:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
description: |
Integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are
@@ -180,9 +173,8 @@ patternProperties:
1: Medium speed
2: Fast speed
3: High speed
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
required:
- pinmux
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index 51a6fac892e3..4f524f822e84 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -54,8 +54,7 @@ properties:
amlogic,ao-sysctrl:
description: phandle to the AO sysctrl node
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
allOf:
- if:
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
deleted file mode 100644
index f0f5553a9e74..000000000000
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Freescale i.MX General Power Controller
-=======================================
-
-The i.MX6 General Power Control (GPC) block contains DVFS load tracking
-counters and Power Gating Control (PGC).
-
-Required properties:
-- compatible: Should be one of the following:
- - fsl,imx6q-gpc
- - fsl,imx6qp-gpc
- - fsl,imx6sl-gpc
- - fsl,imx6sx-gpc
-- reg: should be register base and length as documented in the
- datasheet
-- interrupts: Should contain one interrupt specifier for the GPC interrupt
-- clocks: Must contain an entry for each entry in clock-names.
- See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - ipg
-
-The power domains are generic power domain providers as documented in
-Documentation/devicetree/bindings/power/power-domain.yaml. They are described as
-subnodes of the power gating controller 'pgc' node of the GPC and should
-contain the following:
-
-Required properties:
-- reg: Must contain the DOMAIN_INDEX of this power domain
- The following DOMAIN_INDEX values are valid for i.MX6Q:
- ARM_DOMAIN 0
- PU_DOMAIN 1
- The following additional DOMAIN_INDEX value is valid for i.MX6SL:
- DISPLAY_DOMAIN 2
- The following additional DOMAIN_INDEX value is valid for i.MX6SX:
- PCI_DOMAIN 3
-
-- #power-domain-cells: Should be 0
-
-Optional properties:
-- clocks: a number of phandles to clocks that need to be enabled during domain
- power-up sequencing to ensure reset propagation into devices located inside
- this power domain
-- power-supply: a phandle to the regulator powering this domain
-
-Example:
-
- gpc: gpc@20dc000 {
- compatible = "fsl,imx6q-gpc";
- reg = <0x020dc000 0x4000>;
- interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
- <0 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_IPG>;
- clock-names = "ipg";
-
- pgc {
- #address-cells = <1>;
- #size-cells = <0>;
-
- power-domain@0 {
- reg = <0>;
- #power-domain-cells = <0>;
- };
-
- pd_pu: power-domain@1 {
- reg = <1>;
- #power-domain-cells = <0>;
- power-supply = <&reg_pu>;
- clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
- <&clks IMX6QDL_CLK_GPU3D_SHADER>,
- <&clks IMX6QDL_CLK_GPU2D_CORE>,
- <&clks IMX6QDL_CLK_GPU2D_AXI>,
- <&clks IMX6QDL_CLK_OPENVG_AXI>,
- <&clks IMX6QDL_CLK_VPU_AXI>;
- };
- };
- };
-
-
-Specifying power domain for IP modules
-======================================
-
-IP cores belonging to a power domain should contain a 'power-domains' property
-that is a phandle pointing to the power domain the device belongs to.
-
-Example of a device that is part of the PU power domain:
-
- vpu: vpu@2040000 {
- reg = <0x02040000 0x3c000>;
- /* ... */
- power-domains = <&pd_pu>;
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
new file mode 100644
index 000000000000..a055b3e819d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller
+
+maintainers:
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ The i.MX6 General Power Control (GPC) block contains DVFS load tracking
+ counters and Power Gating Control (PGC).
+
+ The power domains are generic power domain providers as documented in
+ Documentation/devicetree/bindings/power/power-domain.yaml. They are
+ described as subnodes of the power gating controller 'pgc' node of the GPC.
+
+ IP cores belonging to a power domain should contain a 'power-domains'
+ property that is a phandle pointing to the power domain the device belongs
+ to.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6q-gpc
+ - fsl,imx6qp-gpc
+ - fsl,imx6sl-gpc
+ - fsl,imx6sx-gpc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipg
+
+ pgc:
+ type: object
+ description: list of power domains provided by this controller.
+
+ patternProperties:
+ "power-domain@[0-9]$":
+ type: object
+ properties:
+
+ '#power-domain-cells':
+ const: 0
+
+ reg:
+ description: |
+ The following DOMAIN_INDEX values are valid for i.MX6Q:
+ ARM_DOMAIN 0
+ PU_DOMAIN 1
+ The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+ DISPLAY_DOMAIN 2
+ The following additional DOMAIN_INDEX value is valid for i.MX6SX:
+ PCI_DOMAIN 3
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing to ensure reset propagation into devices located
+ inside this power domain.
+ minItems: 1
+ maxItems: 7
+
+ power-supply: true
+
+ required:
+ - '#power-domain-cells'
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - pgc
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpc@20dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
+ clock-names = "ipg";
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@0 {
+ reg = <0>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_pu: power-domain@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ power-supply = <&reg_pu>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>,
+ <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_VPU_AXI>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
deleted file mode 100644
index 61649202f6f5..000000000000
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-Freescale i.MX General Power Controller v2
-==========================================
-
-The i.MX7S/D General Power Control (GPC) block contains Power Gating
-Control (PGC) for various power domains.
-
-Required properties:
-
-- compatible: Should be one of:
- - "fsl,imx7d-gpc"
- - "fsl,imx8mq-gpc"
-
-- reg: should be register base and length as documented in the
- datasheet
-
-- interrupts: Should contain GPC interrupt request 1
-
-Power domains contained within GPC node are generic power domain
-providers, documented in
-Documentation/devicetree/bindings/power/power-domain.yaml, which are
-described as subnodes of the power gating controller 'pgc' node,
-which, in turn, is expected to contain the following:
-
-Required properties:
-
-- reg: Power domain index. Valid values are defined in
- include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
- include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
-
-- #power-domain-cells: Should be 0
-
-Optional properties:
-
-- power-supply: Power supply used to power the domain
-- clocks: a number of phandles to clocks that need to be enabled during
- domain power-up sequencing to ensure reset propagation into devices
- located inside this power domain
-
-Example:
-
- gpc: gpc@303a0000 {
- compatible = "fsl,imx7d-gpc";
- reg = <0x303a0000 0x1000>;
- interrupt-controller;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <3>;
- interrupt-parent = <&intc>;
-
- pgc {
- #address-cells = <1>;
- #size-cells = <0>;
-
- pgc_pcie_phy: power-domain@1 {
- #power-domain-cells = <0>;
-
- reg = <1>;
- power-supply = <&reg_1p0d>;
- };
- };
- };
-
-
-Specifying power domain for IP modules
-======================================
-
-IP cores belonging to a power domain should contain a 'power-domains'
-property that is a phandle for PGC node representing the domain.
-
-Example of a device that is part of the PCIE_PHY power domain:
-
- pcie: pcie@33800000 {
- reg = <0x33800000 0x4000>,
- <0x4ff00000 0x80000>;
- /* ... */
- power-domains = <&pgc_pcie_phy>;
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
new file mode 100644
index 000000000000..bde09a0b2da3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller v2
+
+maintainers:
+ - Andrey Smirnov <andrew.smirnov@gmail.com>
+
+description: |
+ The i.MX7S/D General Power Control (GPC) block contains Power Gating
+ Control (PGC) for various power domains.
+
+ Power domains contained within GPC node are generic power domain
+ providers, documented in
+ Documentation/devicetree/bindings/power/power-domain.yaml, which are
+ described as subnodes of the power gating controller 'pgc' node.
+
+ IP cores belonging to a power domain should contain a 'power-domains'
+ property that is a phandle for PGC node representing the domain.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx7d-gpc
+ - fsl,imx8mq-gpc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ pgc:
+ type: object
+ description: list of power domains provided by this controller.
+
+ patternProperties:
+ "power-domain@[0-9]$":
+ type: object
+ properties:
+
+ '#power-domain-cells':
+ const: 0
+
+ reg:
+ description: |
+ Power domain index. Valid values are defined in
+ include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
+ include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing to ensure reset propagation into devices located
+ inside this power domain.
+ minItems: 1
+ maxItems: 5
+
+ power-supply: true
+
+ required:
+ - '#power-domain-cells'
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - pgc
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpc@303a0000 {
+ compatible = "fsl,imx7d-gpc";
+ reg = <0x303a0000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_mipi_phy: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <0>;
+ power-supply = <&reg_1p0d>;
+ };
+
+ pgc_pcie_phy: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <1>;
+ power-supply = <&reg_1p0d>;
+ };
+
+ pgc_hsic_phy: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <2>;
+ power-supply = <&reg_1p2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
index 078b2cb40fe3..60a23b3beb40 100644
--- a/Documentation/devicetree/bindings/power/renesas,apmu.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
@@ -18,6 +18,7 @@ properties:
compatible:
items:
- enum:
+ - renesas,r8a7742-apmu # RZ/G1H
- renesas,r8a7743-apmu # RZ/G1M
- renesas,r8a7744-apmu # RZ/G1N
- renesas,r8a7745-apmu # RZ/G1E
diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
deleted file mode 100644
index 22f1c3d8b773..000000000000
--- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Freescale i.MX PWM controller
-
-Required properties:
-- compatible : should be "fsl,<soc>-pwm" and one of the following
- compatible strings:
- - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1
- - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27
-- reg: physical base address and length of the controller's registers
-- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml
- in this directory for a description of the cells format.
-- clocks : Clock specifiers for both ipg and per clocks.
-- clock-names : Clock names should include both "ipg" and "per"
-See the clock consumer binding,
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-- interrupts: The interrupt for the pwm controller
-
-Example:
-
-pwm1: pwm@53fb4000 {
- #pwm-cells = <3>;
- compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
- reg = <0x53fb4000 0x4000>;
- clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
- <&clks IMX5_CLK_PWM1_HF_GATE>;
- clock-names = "ipg", "per";
- interrupts = <61>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
new file mode 100644
index 000000000000..4b62af27d4b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/imx-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PWM controller
+
+maintainers:
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+ "#pwm-cells":
+ description: |
+ Should be 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml
+ in this directory for a description of the cells format.
+ enum:
+ - 2
+ - 3
+
+ compatible:
+ enum:
+ - fsl,imx1-pwm
+ - fsl,imx27-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SoC PWM ipg clock
+ - description: SoC PWM per clock
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - "#pwm-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx5-clock.h>
+
+ pwm@53fb4000 {
+ #pwm-cells = <3>;
+ compatible = "fsl,imx27-pwm";
+ reg = <0x53fb4000 0x4000>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
+ clock-names = "ipg", "per";
+ interrupts = <61>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt
deleted file mode 100644
index 5bf20950a24e..000000000000
--- a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Freescale i.MX TPM PWM controller
-
-Required properties:
-- compatible : Should be "fsl,imx7ulp-pwm".
-- reg: Physical base address and length of the controller's registers.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
-- clocks : The clock provided by the SoC to drive the PWM.
-- interrupts: The interrupt for the PWM controller.
-
-Note: The TPM counter and period counter are shared between multiple channels, so all channels
-should use same period setting.
-
-Example:
-
-tpm4: pwm@40250000 {
- compatible = "fsl,imx7ulp-pwm";
- reg = <0x40250000 0x1000>;
- assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
- assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
- clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
- #pwm-cells = <3>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml
new file mode 100644
index 000000000000..fe9ef42544f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/imx-tpm-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX TPM PWM controller
+
+maintainers:
+ - Anson Huang <anson.huang@nxp.com>
+
+description: |
+ The TPM counter and period counter are shared between multiple
+ channels, so all channels should use same period setting.
+
+properties:
+ "#pwm-cells":
+ const: 3
+
+ compatible:
+ enum:
+ - fsl,imx7ulp-pwm
+
+ reg:
+ maxItems: 1
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - "#pwm-cells"
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx7ulp-clock.h>
+
+ pwm@40250000 {
+ compatible = "fsl,imx7ulp-pwm";
+ reg = <0x40250000 0x1000>;
+ assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+ assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+ clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+ #pwm-cells = <3>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
deleted file mode 100644
index a1b8a482f873..000000000000
--- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Freescale MXS PWM controller
-
-Required properties:
-- compatible: should be "fsl,imx23-pwm"
-- reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
- the cells format.
-- fsl,pwm-number: the number of PWM devices
-
-Example:
-
-pwm: pwm@80064000 {
- compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
- reg = <0x80064000 0x2000>;
- #pwm-cells = <3>;
- fsl,pwm-number = <8>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
new file mode 100644
index 000000000000..da68f4a25dd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/mxs-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS PWM controller
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+ - Anson Huang <anson.huang@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-pwm
+
+ reg:
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 3
+
+ fsl,pwm-number:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: u32 value representing the number of PWM devices
+
+required:
+ - compatible
+ - reg
+ - "#pwm-cells"
+ - fsl,pwm-number
+
+additionalProperties: false
+
+examples:
+ - |
+ pwm@80064000 {
+ compatible = "fsl,imx23-pwm";
+ reg = <0x80064000 0x2000>;
+ #pwm-cells = <3>;
+ fsl,pwm-number = <8>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
index ea7f32905172..fc799b0577d4 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
@@ -49,17 +49,17 @@ properties:
are available.
oneOf:
- items:
- - const: timers
+ - const: timers
- items:
- - const: timers
- - const: pwm-tclk0
+ - const: timers
+ - const: pwm-tclk0
- items:
- - const: timers
- - const: pwm-tclk1
+ - const: timers
+ - const: pwm-tclk1
- items:
- - const: timers
- - const: pwm-tclk0
- - const: pwm-tclk1
+ - const: timers
+ - const: pwm-tclk0
+ - const: pwm-tclk1
interrupts:
description:
@@ -78,12 +78,11 @@ properties:
A list of PWM channels used as PWM outputs on particular platform.
It is an array of up to 5 elements being indices of PWM channels
(from 0 to 4), the order does not matter.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - uniqueItems: true
- - items:
- minimum: 0
- maximum: 4
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ uniqueItems: true
+ items:
+ minimum: 0
+ maximum: 4
required:
- clocks
diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
index 945c14e1be35..461afb4c1f5d 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
+++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
@@ -68,7 +68,7 @@ examples:
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
- reg = <0 0xe6e30000 0 0x8>;
+ reg = <0xe6e30000 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 523>;
diff --git a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
deleted file mode 100644
index 69bf41949b01..000000000000
--- a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Cirrus Logic Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-This document lists regulator specific bindings, see the primary binding
-document:
- For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt
- For Cirrus Logic Madera codecs: ../mfd/madera.txt
-
-Optional properties:
- - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
-
-Optional subnodes:
- - ldo1 : Initial data for the LDO1 regulator, as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
- - micvdd : Initial data for the MICVDD regulator, as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
deleted file mode 100644
index 91974e6ee251..000000000000
--- a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the regulator portion
-of the driver.
-
-Also see these documents for generic binding information:
- [1] Regulator: ../regulator/regulator.txt
-
-This binding must be part of the Lochnagar MFD binding:
- [2] ../mfd/cirrus,lochnagar.txt
-
-Optional sub-nodes:
-
- - VDDCORE : Initialisation data for the VDDCORE regulator, which
- supplies the CODECs digital core if it has no build regulator for that
- purpose.
- Required Properties:
- - compatible : One of the following strings:
- "cirrus,lochnagar2-vddcore"
- - SYSVDD-supply: Primary power supply for the Lochnagar.
-
- - MICVDD : Initialisation data for the MICVDD regulator, which
- supplies the CODECs MICVDD.
- Required Properties:
- - compatible : One of the following strings:
- "cirrus,lochnagar2-micvdd"
- - SYSVDD-supply: Primary power supply for the Lochnagar.
-
- - MIC1VDD, MIC2VDD : Initialisation data for the MICxVDD supplies.
- Required Properties:
- - compatible : One of the following strings:
- "cirrus,lochnagar2-mic1vdd", "cirrus,lochnagar2-mic2vdd"
- Optional Properties:
- - cirrus,micbias-input : A property selecting which of the CODEC
- minicard micbias outputs should be used, valid values are 1 - 4.
- - MICBIAS1-supply, MICBIAS2-supply: Regulator supplies for the
- MICxVDD outputs, supplying the digital microphones, normally
- supplied from the attached CODEC.
-
- - VDD1V8 : Recommended fixed regulator for the VDD1V8 regulator, which supplies the
- CODECs analog and 1.8V digital supplies.
- Required Properties:
- - compatible : Should be set to "regulator-fixed"
- - regulator-min-microvolt : Should be set to 1.8V
- - regulator-max-microvolt : Should be set to 1.8V
- - regulator-boot-on
- - regulator-always-on
- - vin-supply : Should be set to same supply as SYSVDD
-
-Example:
-
-lochnagar {
- lochnagar-micvdd: MICVDD {
- compatible = "cirrus,lochnagar2-micvdd";
-
- SYSVDD-supply = <&wallvdd>;
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- lochnagar-vdd1v8: VDD1V8 {
- compatible = "regulator-fixed";
-
- regulator-name = "VDD1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
-
- vin-supply = <&wallvdd>;
- };
-};
-
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
index 9d3b28417fb6..605590384b48 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -46,24 +46,22 @@ properties:
0: LOW
1: HIGH
Default is LOW if nothing else is specified.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - maxItems: 8
- items:
- enum: [ 0, 1 ]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 8
+ items:
+ enum: [0, 1]
+ default: 0
states:
description: Selection of available voltages/currents provided by this
regulator and matching GPIO configurations to achieve them. If there are
no states in the "states" array, use a fixed regulator instead.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-matrix
- - maxItems: 8
- items:
- items:
- - description: Voltage in microvolts
- - description: GPIO group state value
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ maxItems: 8
+ items:
+ items:
+ - description: Voltage in microvolts
+ - description: GPIO group state value
startup-delay-us:
description: startup time in microseconds
@@ -81,12 +79,11 @@ properties:
regulator-type:
description: Specifies what is being regulated.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
- - enum:
- - voltage
- - current
- default: voltage
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - voltage
+ - current
+ default: voltage
required:
- compatible
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 3b019fa6db31..90727fdc1283 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -27,13 +27,11 @@ properties:
patternProperties:
"^buck[1-4]$":
- allOf:
- - $ref: "regulator.yaml#"
+ $ref: "regulator.yaml#"
type: object
"^ldo[1-4]$":
- allOf:
- - $ref: "regulator.yaml#"
+ $ref: "regulator.yaml#"
type: object
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index ae6e7ab36c58..12b8963615c3 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -21,17 +21,16 @@ properties:
regulators:
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
+
description: |
list of regulators provided by this controller, must be named
after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
properties:
mps,switch-freq:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint8"
- enum: [ 0, 1, 2, 3 ]
+ $ref: "/schemas/types.yaml#/definitions/uint8"
+ enum: [0, 1, 2, 3]
default: 2
description: |
switching frequency must be one of following corresponding value
@@ -40,32 +39,27 @@ properties:
patternProperties:
"^ldo[1-4]$":
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
"^ldortc$":
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
"^buck[1-4]$":
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
properties:
mps,buck-softstart:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint8"
- enum: [ 0, 1, 2, 3 ]
+ $ref: "/schemas/types.yaml#/definitions/uint8"
+ enum: [0, 1, 2, 3]
description: |
defines the soft start time of this buck, must be one of the following
corresponding values 150us, 300us, 610us, 920us
mps,buck-phase-delay:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint8"
- enum: [ 0, 1, 2, 3 ]
+ $ref: "/schemas/types.yaml#/definitions/uint8"
+ enum: [0, 1, 2, 3]
description: |
defines the phase delay of this buck, must be one of the following
corresponding values 0deg, 90deg, 180deg, 270deg
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 91a39a33000b..ec505dbbf87c 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -123,9 +123,8 @@ properties:
0: Disable active discharge.
1: Enable active discharge.
Absence of this property will leave configuration to default.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum: [ 0, 1 ]
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum: [0, 1]
regulator-coupled-with:
description: Regulators with which the regulator is coupled. The linkage
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
index 1e52dafcb5c9..5ce587fff961 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -24,10 +24,9 @@ description: |
patternProperties:
"^LDO[1-7]$":
type: object
- allOf:
- - $ref: regulator.yaml#
description:
Properties for single LDO regulator.
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -39,10 +38,9 @@ patternProperties:
"^BUCK[1-7]$":
type: object
- allOf:
- - $ref: regulator.yaml#
description:
Properties for single BUCK regulator.
+ $ref: regulator.yaml#
properties:
regulator-name:
@@ -51,40 +49,36 @@ patternProperties:
should be "buck1", ..., "buck7"
rohm,dvs-run-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 3300000
description:
PMIC default "RUN" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 3300000
rohm,dvs-idle-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 3300000
description:
PMIC default "IDLE" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 3300000
rohm,dvs-suspend-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 3300000
description:
PMIC default "SUSPEND" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 3300000
rohm,dvs-lpsr-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 3300000
description:
PMIC default "LPSR" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 3300000
# Supported default DVS states:
# buck | run | idle | suspend | lpsr
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
index 543d4b52397e..19d9408d9c3b 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
@@ -30,8 +30,7 @@ description: |
patternProperties:
"^LDO[1-7]$":
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
description:
Properties for single LDO regulator.
@@ -45,8 +44,7 @@ patternProperties:
"^BUCK[1-8]$":
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
description:
Properties for single BUCK regulator.
@@ -57,28 +55,25 @@ patternProperties:
should be "buck1", ..., "buck8"
rohm,dvs-run-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 1300000
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 1300000
description:
PMIC default "RUN" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-idle-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 1300000
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 1300000
description:
PMIC default "IDLE" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-suspend-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 1300000
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 1300000
description:
PMIC default "SUSPEND" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
index 64f1183ce841..cb336b2c16af 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -23,8 +23,7 @@ properties:
- st,stm32mp1-booster
st,syscfg:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
description: phandle to system configuration controller.
vdda-supply:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
index 8d8f38fe85dc..e6322bc3e447 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -26,8 +26,7 @@ patternProperties:
"^(reg11|reg18|usb33)$":
type: object
- allOf:
- - $ref: "regulator.yaml#"
+ $ref: "regulator.yaml#"
required:
- compatible
diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
new file mode 100644
index 000000000000..a0aea73bf412
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona/Madera class audio SoCs
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ These devices are audio SoCs with extensive digital capabilities and a
+ range of analogue I/O.
+
+ This document lists regulator specific bindings, see the primary binding
+ document. For Wolfson Microelectronic Arizona codecs ../mfd/wlf,arizona.yaml
+ and for Cirrus Logic Madera codecs ../mfd/madera.txt
+
+properties:
+ wlf,ldoena:
+ description:
+ GPIO specifier for the GPIO controlling LDOENA.
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ maxItems: 1
+
+ ldo1:
+ description:
+ Initial data for the LDO1 regulator.
+ $ref: "regulator.yaml#"
+ type: object
+
+ micvdd:
+ description:
+ Initial data for the MICVDD regulator.
+ $ref: "regulator.yaml#"
+ type: object
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index c0d83865e933..4ffa25268fcc 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -25,25 +25,23 @@ properties:
maxItems: 3
resets:
- maxItems: 1
+ maxItems: 1
st,syscfg-holdboot:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
description: remote processor reset hold boot
- Phandle of syscon block.
- The offset of the hold boot setting register.
- The field mask of the hold boot.
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
maxItems: 1
st,syscfg-tz:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
description:
Reference to the system configuration which holds the RCC trust zone mode
- Phandle of syscon block.
- The offset of the RCC trust zone mode register.
- The field mask of the RCC trust zone mode.
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
maxItems: 1
interrupts:
@@ -90,8 +88,7 @@ properties:
(see ../reserved-memory/reserved-memory.txt)
st,syscfg-pdds:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
description: |
Reference to the system configuration which holds the remote
1st cell: phandle to syscon block
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
index bac4afa3b197..4dd20de6977f 100644
--- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
@@ -77,6 +77,8 @@ Regions in the /reserved-memory node may be referenced by other device
nodes by adding a memory-region property to the device node.
memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
+memory-region-names (optional) - a list of names, one for each corresponding
+ entry in the memory-region property
Example
-------
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
index 512a33bdb208..dfce6738b033 100644
--- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: BCM7216 RESCAL reset controller
-description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216.
+description: This document describes the BCM7216 RESCAL reset controller
+ which is responsible for controlling the reset of the SATA and PCIe0/1
+ instances on BCM7216.
maintainers:
- Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
index 8ac437282659..6b2d56cc3f38 100644
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -21,8 +21,7 @@ properties:
intel,global-reset:
description: Global reset register offset and bit offset.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
items:
- description: Register offset
- description: Register bit offset
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 04819ad379c2..f80ba2c66f71 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -40,24 +40,18 @@ properties:
and identifies the type of the hart.
mmu-type:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/string"
- - enum:
- - riscv,sv32
- - riscv,sv39
- - riscv,sv48
description:
Identifies the MMU address translation mode used on this
hart. These values originate from the RISC-V Privileged
Specification document, available from
https://riscv.org/specifications/
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum:
+ - riscv,sv32
+ - riscv,sv39
+ - riscv,sv48
riscv,isa:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/string"
- - enum:
- - rv64imac
- - rv64imafdc
description:
Identifies the specific RISC-V instruction set architecture
supported by the hart. These are documented in the RISC-V
@@ -67,6 +61,10 @@ properties:
While the isa strings in ISA specification are case
insensitive, letters in the riscv,isa string must be all
lowercase to simplify parsing.
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum:
+ - rv64imac
+ - rv64imafdc
# RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
timebase-frequency: false
diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
index b95cb017f469..eff9df4b856a 100644
--- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
@@ -43,6 +43,9 @@ properties:
items:
enum: [ fck, rtc_x1, rtc_x3, extal ]
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
@@ -50,6 +53,7 @@ required:
- interrupt-names
- clocks
- clock-names
+ - power-domains
additionalProperties: false
@@ -68,5 +72,6 @@ examples:
interrupt-names = "alarm", "period", "carry";
clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
<&rtc_x3_clk>, <&extal_clk>;
+ power-domains = <&cpg_clocks>;
clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
deleted file mode 100644
index 5bcd31d995b0..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Real Time Clock of the i.MX SoCs
-
-RTC controller for the i.MX SoCs
-
-Required properties:
-- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: IRQ line for the RTC.
-- clocks: should contain two entries:
- * one for the input reference
- * one for the the SoC RTC
-- clock-names: should contain:
- * "ref" for the input reference clock
- * "ipg" for the SoC RTC clock
-
-Example:
-
-rtc@10007000 {
- compatible = "fsl,imx21-rtc";
- reg = <0x10007000 0x1000>;
- interrupts = <22>;
- clocks = <&clks IMX27_CLK_CKIL>,
- <&clks IMX27_CLK_RTC_IPG_GATE>;
- clock-names = "ref", "ipg";
-};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml
new file mode 100644
index 000000000000..4f263fa6fd0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc-mxc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Real Time Clock of the i.MX SoCs
+
+allOf:
+ - $ref: "rtc.yaml#"
+
+maintainers:
+ - Philippe Reynes <tremyfr@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx1-rtc
+ - fsl,imx21-rtc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: input reference
+ - description: the SoC RTC clock
+
+ clock-names:
+ items:
+ - const: ref
+ - const: ipg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx27-clock.h>
+
+ rtc@10007000 {
+ compatible = "fsl,imx21-rtc";
+ reg = <0x10007000 0x1000>;
+ interrupts = <22>;
+ clocks = <&clks IMX27_CLK_CKIL>,
+ <&clks IMX27_CLK_RTC_IPG_GATE>;
+ clock-names = "ref", "ipg";
+ };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt
deleted file mode 100644
index 79d7e87b0d91..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* i.MX53 Secure Real Time Clock (SRTC)
-
-Required properties:
-- compatible: should be: "fsl,imx53-rtc"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- clocks: should contain the phandle for the rtc clock
-- interrupts: rtc alarm interrupt
-
-Example:
-
-rtc@53fa4000 {
- compatible = "fsl,imx53-rtc";
- reg = <0x53fa4000 0x4000>;
- interrupts = <24>;
- clocks = <&clks IMX5_CLK_SRTC_GATE>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml
new file mode 100644
index 000000000000..2d1a30663d72
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc-mxc_v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX53 Secure Real Time Clock (SRTC)
+
+allOf:
+ - $ref: "rtc.yaml#"
+
+maintainers:
+ - Patrick Bruenn <p.bruenn@beckhoff.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx53-rtc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx5-clock.h>
+
+ rtc@53fa4000 {
+ compatible = "fsl,imx53-rtc";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <24>;
+ clocks = <&clks IMX5_CLK_SRTC_GATE>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
index 48c6cafca90c..5456604b1c14 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
@@ -32,16 +32,15 @@ properties:
maxItems: 1
st,syscfg:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
- - items:
- minItems: 3
- maxItems: 3
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ items:
+ minItems: 3
+ maxItems: 3
description: |
- Phandle/offset/mask triplet. The phandle to pwrcfg used to
- access control register at offset, and change the dbp (Disable Backup
- Protection) bit represented by the mask, mandatory to disable/enable backup
- domain (RTC registers) write protection.
+ Phandle/offset/mask triplet. The phandle to pwrcfg used to
+ access control register at offset, and change the dbp (Disable Backup
+ Protection) bit represented by the mask, mandatory to disable/enable backup
+ domain (RTC registers) write protection.
assigned-clocks:
description: |
@@ -78,14 +77,14 @@ allOf:
const: st,stm32h7-rtc
then:
- properties:
- clocks:
- minItems: 2
- maxItems: 2
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
- required:
- - clock-names
- - st,syscfg
+ required:
+ - clock-names
+ - st,syscfg
- if:
properties:
@@ -94,16 +93,16 @@ allOf:
const: st,stm32mp1-rtc
then:
- properties:
- clocks:
- minItems: 2
- maxItems: 2
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
- assigned-clocks: false
- assigned-clock-parents: false
+ assigned-clocks: false
+ assigned-clock-parents: false
- required:
- - clock-names
+ required:
+ - clock-names
required:
- compatible
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
deleted file mode 100644
index 55700f20f6ee..000000000000
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-* UART (Universal Asynchronous Receiver/Transmitter)
-
-Required properties:
-- compatible : one of:
- - "ns8250"
- - "ns16450"
- - "ns16550a"
- - "ns16550"
- - "ns16750"
- - "ns16850"
- - For Tegra20, must contain "nvidia,tegra20-uart"
- - For other Tegra, must contain '"nvidia,<chip>-uart",
- "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124,
- tegra132, or tegra210.
- - "nxp,lpc3220-uart"
- - "ralink,rt2880-uart"
- - For MediaTek BTIF, must contain '"mediatek,<chip>-btif",
- "mediatek,mtk-btif"' where <chip> is mt7622, mt7623.
- - "altr,16550-FIFO32"
- - "altr,16550-FIFO64"
- - "altr,16550-FIFO128"
- - "fsl,16550-FIFO64"
- - "fsl,ns16550"
- - "intel,xscale-uart"
- - "ti,da830-uart"
- - "aspeed,ast2400-vuart"
- - "aspeed,ast2500-vuart"
- - "nuvoton,npcm750-uart"
- - "serial" if the port type is unknown.
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-- clock-frequency : the input clock frequency for the UART
- or
- clocks phandle to refer to the clk used as per Documentation/devicetree
- /bindings/clock/clock-bindings.txt
-
-Optional properties:
-- current-speed : the current active speed of the UART.
-- reg-offset : offset to apply to the mapbase from the start of the registers.
-- reg-shift : quantity to shift the register offsets by.
-- reg-io-width : the size (in bytes) of the IO accesses that should be
- performed on the device. There are some systems that require 32-bit
- accesses to the UART (e.g. TI davinci).
-- used-by-rtas : set to indicate that the port is in use by the OpenFirmware
- RTAS and should not be registered.
-- no-loopback-test: set to indicate that the port does not implements loopback
- test mode
-- fifo-size: the fifo size of the UART.
-- auto-flow-control: one way to enable automatic flow control support. The
- driver is allowed to detect support for the capability even without this
- property.
-- tx-threshold: Specify the TX FIFO low water indication for parts with
- programmable TX FIFO thresholds.
-- resets : phandle + reset specifier pairs
-- overrun-throttle-ms : how long to pause uart rx when input overrun is encountered.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
- line respectively. It will use specified GPIO instead of the peripheral
- function pin for the UART feature. If unsure, don't specify this property.
-- aspeed,sirq-polarity-sense: Only applicable to aspeed,ast2500-vuart.
- phandle to aspeed,ast2500-scu compatible syscon alongside register offset
- and bit number to identify how the SIRQ polarity should be configured.
- One possible data source is the LPC/eSPI mode bit.
- Example: aspeed,sirq-polarity-sense = <&syscon 0x70 25>
-
-Note:
-* fsl,ns16550:
- ------------
- Freescale DUART is very similar to the PC16552D (and to a
- pair of NS16550A), albeit with some nonstandard behavior such as
- erratum A-004737 (relating to incorrect BRK handling).
-
- Represents a single port that is compatible with the DUART found
- on many Freescale chips (examples include mpc8349, mpc8548,
- mpc8641d, p4080 and ls2085a).
-
-Example:
-
- uart@80230000 {
- compatible = "ns8250";
- reg = <0x80230000 0x100>;
- clock-frequency = <3686400>;
- interrupts = <10>;
- reg-shift = <2>;
- };
-
-Example for OMAP UART using GPIO-based modem control signals:
-
- uart4: serial@49042000 {
- compatible = "ti,omap3-uart";
- reg = <0x49042000 0x400>;
- interrupts = <80>;
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
- rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
- dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
new file mode 100644
index 000000000000..c1d4c196f005
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -0,0 +1,233 @@
+# Copyright 2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UART (Universal Asynchronous Receiver/Transmitter) bindings
+
+maintainers:
+ - devicetree@vger.kernel.org
+
+allOf:
+ - $ref: /schemas/serial.yaml#
+ - if:
+ required:
+ - aspeed,sirq-polarity-sense
+ then:
+ properties:
+ compatible:
+ const: aspeed,ast2500-vuart
+ - if:
+ properties:
+ compatible:
+ const: mrvl,mmp-uart
+ then:
+ properties:
+ reg-shift:
+ const: 2
+ required:
+ - reg-shift
+ - if:
+ not:
+ properties:
+ compatible:
+ items:
+ - enum:
+ - ns8250
+ - ns16450
+ - ns16550
+ - ns16550a
+ then:
+ anyOf:
+ - required: [ clock-frequency ]
+ - required: [ clocks ]
+
+properties:
+ compatible:
+ oneOf:
+ - const: ns8250
+ - const: ns16450
+ - const: ns16550
+ - const: ns16550a
+ - const: ns16850
+ - const: aspeed,ast2400-vuart
+ - const: aspeed,ast2500-vuart
+ - const: intel,xscale-uart
+ - const: mrvl,pxa-uart
+ - const: nuvoton,npcm750-uart
+ - const: nvidia,tegra20-uart
+ - const: nxp,lpc3220-uart
+ - items:
+ - enum:
+ - altr,16550-FIFO32
+ - altr,16550-FIFO64
+ - altr,16550-FIFO128
+ - fsl,16550-FIFO64
+ - fsl,ns16550
+ - andestech,uart16550
+ - nxp,lpc1850-uart
+ - opencores,uart16550-rtlsvn105
+ - ti,da830-uart
+ - const: ns16550a
+ - items:
+ - enum:
+ - ns16750
+ - cavium,octeon-3860-uart
+ - xlnx,xps-uart16550-2.00.b
+ - ralink,rt2880-uart
+ - enum:
+ - ns16550 # Deprecated, unless the FIFO really is broken
+ - ns16550a
+ - items:
+ - enum:
+ - ralink,mt7620a-uart
+ - ralink,rt3052-uart
+ - ralink,rt3883-uart
+ - const: ralink,rt2880-uart
+ - enum:
+ - ns16550 # Deprecated, unless the FIFO really is broken
+ - ns16550a
+ - items:
+ - enum:
+ - mediatek,mt7622-btif
+ - mediatek,mt7623-btif
+ - const: mediatek,mtk-btif
+ - items:
+ - enum:
+ - mediatek,mt7622-btif
+ - mediatek,mt7623-btif
+ - const: mediatek,mtk-btif
+ - items:
+ - const: mrvl,mmp-uart
+ - const: intel,xscale-uart
+ - items:
+ - enum:
+ - nvidia,tegra30-uart
+ - nvidia,tegra114-uart
+ - nvidia,tegra124-uart
+ - nvidia,tegra186-uart
+ - nvidia,tegra194-uart
+ - nvidia,tegra210-uart
+ - const: nvidia,tegra20-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency: true
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ current-speed:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: The current active speed of the UART.
+
+ reg-offset:
+ description: |
+ Offset to apply to the mapbase from the start of the registers.
+
+ reg-shift:
+ description: Quantity to shift the register offsets by.
+
+ reg-io-width:
+ description: |
+ The size (in bytes) of the IO accesses that should be performed on the
+ device. There are some systems that require 32-bit accesses to the
+ UART (e.g. TI davinci).
+
+ used-by-rtas:
+ type: boolean
+ description: |
+ Set to indicate that the port is in use by the OpenFirmware RTAS and
+ should not be registered.
+
+ no-loopback-test:
+ type: boolean
+ description: |
+ Set to indicate that the port does not implement loopback test mode.
+
+ fifo-size:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: The fifo size of the UART.
+
+ auto-flow-control:
+ type: boolean
+ description: |
+ One way to enable automatic flow control support. The driver is
+ allowed to detect support for the capability even without this
+ property.
+
+ tx-threshold:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: |
+ Specify the TX FIFO low water indication for parts with programmable
+ TX FIFO thresholds.
+
+ overrun-throttle-ms:
+ description: |
+ How long to pause uart rx when input overrun is encountered.
+
+ rts-gpios: true
+ cts-gpios: true
+ dtr-gpios: true
+ dsr-gpios: true
+ rng-gpios: true
+ dcd-gpios: true
+
+ aspeed,sirq-polarity-sense:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ Phandle to aspeed,ast2500-scu compatible syscon alongside register
+ offset and bit number to identify how the SIRQ polarity should be
+ configured. One possible data source is the LPC/eSPI mode bit. Only
+ applicable to aspeed,ast2500-vuart.
+
+required:
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial@80230000 {
+ compatible = "ns8250";
+ reg = <0x80230000 0x100>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ clock-frequency = <48000000>;
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial@49042000 {
+ compatible = "andestech,uart16550", "ns16550a";
+ reg = <0x49042000 0x400>;
+ interrupts = <80>;
+ clock-frequency = <48000000>;
+ cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ serial@1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
+ reg-shift = <2>;
+ interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ no-loopback-test;
+ aspeed,sirq-polarity-sense = <&syscon 0x70 25>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index d4178ab0d675..75ebc9952a99 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -24,18 +24,18 @@ properties:
oneOf:
- description: Always-on power domain UART controller
items:
- - enum:
+ - enum:
+ - amlogic,meson6-uart
+ - amlogic,meson8-uart
+ - amlogic,meson8b-uart
+ - amlogic,meson-gx-uart
+ - const: amlogic,meson-ao-uart
+ - description: Everything-Else power domain UART controller
+ enum:
- amlogic,meson6-uart
- amlogic,meson8-uart
- amlogic,meson8b-uart
- amlogic,meson-gx-uart
- - const: amlogic,meson-ao-uart
- - description: Everything-Else power domain UART controller
- enum:
- - amlogic,meson6-uart
- - amlogic,meson8-uart
- - amlogic,meson8b-uart
- - amlogic,meson-gx-uart
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
deleted file mode 100644
index 24ed8769f4af..000000000000
--- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Ingenic SoC UART
-
-Required properties:
-- compatible : One of:
- - "ingenic,jz4740-uart",
- - "ingenic,jz4760-uart",
- - "ingenic,jz4770-uart",
- - "ingenic,jz4775-uart",
- - "ingenic,jz4780-uart",
- - "ingenic,x1000-uart".
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-- clocks : phandles to the module & baud clocks.
-- clock-names: tuple listing input clock names.
- Required elements: "baud", "module"
-
-Example:
-
-uart0: serial@10030000 {
- compatible = "ingenic,jz4740-uart";
- reg = <0x10030000 0x100>;
-
- interrupt-parent = <&intc>;
- interrupts = <9>;
-
- clocks = <&ext>, <&cgu JZ4740_CLK_UART0>;
- clock-names = "baud", "module";
-};
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
new file mode 100644
index 000000000000..c023d650e9c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/ingenic,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs UART controller devicetree bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ $nodename:
+ pattern: "^serial@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-uart
+ - ingenic,jz4760-uart
+ - ingenic,jz4780-uart
+ - ingenic,x1000-uart
+ - items:
+ - enum:
+ - ingenic,jz4770-uart
+ - ingenic,jz4775-uart
+ - const: ingenic,jz4760-uart
+ - items:
+ - const: ingenic,jz4725b-uart
+ - const: ingenic,jz4740-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Baud clock
+ - description: UART module clock
+
+ clock-names:
+ items:
+ - const: baud
+ - const: module
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ #include <dt-bindings/dma/jz4780-dma.h>
+ #include <dt-bindings/gpio/gpio.h>
+ serial@10032000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10032000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <49>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ dmas = <&dma JZ4780_DMA_UART2_RX 0xffffffff>,
+ <&dma JZ4780_DMA_UART2_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&wlan0_power>;
+ device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/serial/mrvl-serial.txt b/Documentation/devicetree/bindings/serial/mrvl-serial.txt
deleted file mode 100644
index d744340de887..000000000000
--- a/Documentation/devicetree/bindings/serial/mrvl-serial.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-PXA UART controller
-
-Required properties:
-- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart".
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
index 1a64d59152aa..c23c93b400f0 100644
--- a/Documentation/devicetree/bindings/serial/pl011.yaml
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -88,17 +88,15 @@ properties:
description:
Rate at which poll occurs when auto-poll is set.
default 100ms.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 100
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 100
poll-timeout-ms:
description:
Poll timeout when auto-poll is set, default
3000ms.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 3000
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 3000
required:
- compatible
diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
deleted file mode 100644
index 7d65126bd1d7..000000000000
--- a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Qualcomm Atheros AR9330 High-Speed UART
-
-Required properties:
-
-- compatible: Must be "qca,ar9330-uart"
-
-- reg: Specifies the physical base address of the controller and
- the length of the memory mapped region.
-
-- interrupts: Specifies the interrupt source of the parent interrupt
- controller. The format of the interrupt specifier depends on the
- parent interrupt controller.
-
-Additional requirements:
-
- Each UART port must have an alias correctly numbered in "aliases"
- node.
-
-Example:
-
- aliases {
- serial0 = &uart0;
- };
-
- uart0: uart@18020000 {
- compatible = "qca,ar9330-uart";
- reg = <0x18020000 0x14>;
-
- interrupt-parent = <&intc>;
- interrupts = <3>;
- };
diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml
new file mode 100644
index 000000000000..a344369285b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qca,ar9330-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR9330 High-Speed UART
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+allOf:
+ - $ref: /schemas/serial.yaml#
+
+properties:
+ compatible:
+ const: qca,ar9330-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: uart
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ serial@18020000 {
+ compatible = "qca,ar9330-uart";
+ reg = <0x18020000 0x14>;
+ clocks = <&ref>;
+ clock-names = "uart";
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
new file mode 100644
index 000000000000..82aefdb0d45e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,em-uart.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas EMMA Mobile UART Interface
+
+maintainers:
+ - Magnus Damm <magnus.damm@gmail.com>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ const: renesas,em-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: sclk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ uart0: serial@e1020000 {
+ compatible = "renesas,em-uart";
+ reg = <0xe1020000 0x38>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usia_u0_sclk>;
+ clock-names = "sclk";
+ };
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index 91101521ef07..6b04c0451d41 100644
--- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -24,6 +24,7 @@ properties:
- items:
- enum:
+ - renesas,hscif-r8a7742 # RZ/G1H
- renesas,hscif-r8a7743 # RZ/G1M
- renesas,hscif-r8a7744 # RZ/G1N
- renesas,hscif-r8a7745 # RZ/G1E
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index 70392b9bd977..570b379f9f19 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -33,6 +33,7 @@ properties:
- items:
- enum:
+ - renesas,scif-r8a7742 # RZ/G1H
- renesas,scif-r8a7743 # RZ/G1M
- renesas,scif-r8a7744 # RZ/G1N
- renesas,scif-r8a7745 # RZ/G1E
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
index b28bcb268854..78b8e20dd34d 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -24,13 +24,14 @@ properties:
- items:
- enum:
- - renesas,scifa-r8a7743 # R8A7743 RZ/G1M
- - renesas,scifa-r8a7744 # R8A7744 RZ/G1N
- - renesas,scifa-r8a7745 # R8A7745 RZ/G1E
- - renesas,scifa-r8a7790 # R8A7790 R-Car H2
- - renesas,scifa-r8a7791 # R8A7791 R-Car M2-W
- - renesas,scifa-r8a7793 # R8A7793 R-Car M2-N
- - renesas,scifa-r8a7794 # R8A7794 R-Car E2
+ - renesas,scifa-r8a7742 # RZ/G1H
+ - renesas,scifa-r8a7743 # RZ/G1M
+ - renesas,scifa-r8a7744 # RZ/G1N
+ - renesas,scifa-r8a7745 # RZ/G1E
+ - renesas,scifa-r8a7790 # R-Car H2
+ - renesas,scifa-r8a7791 # R-Car M2-W
+ - renesas,scifa-r8a7793 # R-Car M2-N
+ - renesas,scifa-r8a7794 # R-Car E2
- const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1
- const: renesas,scifa # generic SCIFA compatible UART
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
index 57205cb1dcd4..b083970c16a9 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -24,6 +24,7 @@ properties:
- items:
- enum:
+ - renesas,scifb-r8a7742 # RZ/G1H
- renesas,scifb-r8a7743 # RZ/G1M
- renesas,scifb-r8a7744 # RZ/G1N
- renesas,scifb-r8a7745 # RZ/G1E
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index d4beaf11222d..8141e4aad530 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -6,40 +6,39 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: RS485 serial communications Bindings
-description: The RTS signal is capable of automatically controlling
- line direction for the built-in half-duplex mode.
- The properties described hereafter shall be given to a
- half-duplex capable UART node.
+description: The RTS signal is capable of automatically controlling line
+ direction for the built-in half-duplex mode. The properties described
+ hereafter shall be given to a half-duplex capable UART node.
maintainers:
- - Rob Herring <robh@kernel.org>
+ - Rob Herring <robh@kernel.org>
properties:
rs485-rts-delay:
description: prop-encoded-array <a b>
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- items:
- - description:
- Delay between rts signal and beginning of data sent in milliseconds.
- It corresponds to the delay before sending data.
- default: 0
- maximum: 1000
- - description:
- Delay between end of data sent and rts signal in milliseconds.
- It corresponds to the delay after sending data and actual release of the line.
- default: 0
- maximum: 1000
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ items:
+ - description: Delay between rts signal and beginning of data sent in
+ milliseconds. It corresponds to the delay before sending data.
+ default: 0
+ maximum: 1000
+ - description: Delay between end of data sent and rts signal in milliseconds.
+ It corresponds to the delay after sending data and actual release
+ of the line.
+ default: 0
+ maximum: 1000
rs485-rts-active-low:
description: drive RTS low when sending (default is high).
$ref: /schemas/types.yaml#/definitions/flag
linux,rs485-enabled-at-boot-time:
- description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
+ description: enables the rs485 feature at boot time. It can be disabled
+ later with proper ioctl.
$ref: /schemas/types.yaml#/definitions/flag
rs485-rx-during-tx:
- description: enables the receiving of data even while sending data.
- $ref: /schemas/types.yaml#/definitions/flag
+ description: enables the receiving of data even while sending data.
+ $ref: /schemas/types.yaml#/definitions/flag
+...
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index 9d2ce347875b..ff2f49fe322c 100644
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -51,9 +51,8 @@ properties:
samsung,uart-fifosize:
description: The fifo size supported by the UART channel.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [16, 64, 256]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [16, 64, 256]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 53204d90d0c7..8645d0e526b4 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -67,6 +67,14 @@ properties:
(wired and enabled by pinmux configuration). This depends on both the
UART hardware and the board wiring.
+ rx-tx-swap:
+ type: boolean
+ description: RX and TX pins are swapped.
+
+ cts-rts-swap:
+ type: boolean
+ description: CTS and RTS pins are swapped.
+
if:
required:
- uart-has-rtscts
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
index e8d3aeda1202..92283f693de0 100644
--- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -55,7 +55,7 @@ examples:
compatible = "sifive,fu540-c000-uart", "sifive,uart0";
interrupt-parent = <&plic0>;
interrupts = <80>;
- reg = <0x0 0x10010000 0x0 0x1000>;
+ reg = <0x10010000 0x1000>;
clocks = <&prci PRCI_CLK_TLCLK>;
};
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
index cb008fd188d8..02b2d5ba01d6 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
@@ -26,11 +26,11 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - amlogic,meson8-canvas
- - amlogic,meson8b-canvas
- - amlogic,meson8m2-canvas
- - const: amlogic,canvas
+ - enum:
+ - amlogic,meson8-canvas
+ - amlogic,meson8b-canvas
+ - amlogic,meson8m2-canvas
+ - const: amlogic,canvas
- const: amlogic,canvas # GXBB and newer SoCs
reg:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
deleted file mode 100644
index dab7ca9f250c..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Qualcomm Technologies, Inc. GENI Serial Engine QUP Wrapper Controller
-
-Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
-is a programmable module for supporting a wide range of serial interfaces
-like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
-Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
-Wrapper controller is modeled as a node with zero or more child nodes each
-representing a serial engine.
-
-Required properties:
-- compatible: Must be "qcom,geni-se-qup".
-- reg: Must contain QUP register address and length.
-- clock-names: Must contain "m-ahb" and "s-ahb".
-- clocks: AHB clocks needed by the device.
-
-Required properties if child node exists:
-- #address-cells: Must be <1> for Serial Engine Address
-- #size-cells: Must be <1> for Serial Engine Address Size
-- ranges: Must be present
-
-Properties for children:
-
-A GENI based QUP wrapper controller node can contain 0 or more child nodes
-representing serial devices. These serial devices can be a QCOM UART, I2C
-controller, SPI controller, or some combination of aforementioned devices.
-Please refer below the child node definitions for the supported serial
-interface protocols.
-
-Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller
-
-Required properties:
-- compatible: Must be "qcom,geni-i2c".
-- reg: Must contain QUP register address and length.
-- interrupts: Must contain I2C interrupt.
-- clock-names: Must contain "se".
-- clocks: Serial engine core clock needed by the device.
-- #address-cells: Must be <1> for I2C device address.
-- #size-cells: Must be <0> as I2C addresses have no size component.
-
-Optional property:
-- clock-frequency: Desired I2C bus clock frequency in Hz.
- When missing default to 100000Hz.
-
-Child nodes should conform to I2C bus binding as described in i2c.txt.
-
-Qualcomm Technologies Inc. GENI Serial Engine based UART Controller
-
-Required properties:
-- compatible: Must be "qcom,geni-debug-uart" or "qcom,geni-uart".
-- reg: Must contain UART register location and length.
-- interrupts: Must contain UART core interrupts.
-- clock-names: Must contain "se".
-- clocks: Serial engine core clock needed by the device.
-
-Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller
-node binding is described in
-Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt.
-
-Example:
- geniqup@8c0000 {
- compatible = "qcom,geni-se-qup";
- reg = <0x8c0000 0x6000>;
- clock-names = "m-ahb", "s-ahb";
- clocks = <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
- <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- i2c0: i2c@a94000 {
- compatible = "qcom,geni-i2c";
- reg = <0xa94000 0x4000>;
- interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qup_1_i2c_5_active>;
- pinctrl-1 = <&qup_1_i2c_5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- uart0: serial@a88000 {
- compatible = "qcom,geni-debug-uart";
- reg = <0xa88000 0x7000>;
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qup_1_uart_3_active>;
- pinctrl-1 = <&qup_1_uart_3_sleep>;
- };
-
- }
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
new file mode 100644
index 000000000000..dee8bb2b69fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -0,0 +1,225 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: GENI Serial Engine QUP Wrapper Controller
+
+maintainers:
+ - Mukesh Savaliya <msavaliy@codeaurora.org>
+ - Akash Asthana <akashast@codeaurora.org>
+
+description: |
+ Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
+ is a programmable module for supporting a wide range of serial interfaces
+ like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
+ Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
+ Wrapper controller is modeled as a node with zero or more child nodes each
+ representing a serial engine.
+
+properties:
+ compatible:
+ enum:
+ - qcom,geni-se-qup
+
+ reg:
+ description: QUP wrapper common register address and length.
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: m-ahb
+ - const: s-ahb
+
+ clocks:
+ items:
+ - description: Master AHB Clock
+ - description: Slave AHB Clock
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges: true
+
+ interconnects:
+ maxItems: 1
+
+ interconnect-names:
+ const: qup-core
+
+required:
+ - compatible
+ - reg
+ - clock-names
+ - clocks
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ type: object
+ description: Common properties for GENI Serial Engine based I2C, SPI and
+ UART controller.
+
+ properties:
+ reg:
+ description: GENI Serial Engine register address and length.
+ maxItems: 1
+
+ clock-names:
+ const: se
+
+ clocks:
+ description: Serial engine core clock needed by the device.
+ maxItems: 1
+
+ interconnects:
+ minItems: 2
+ maxItems: 3
+
+ interconnect-names:
+ minItems: 2
+ items:
+ - const: qup-core
+ - const: qup-config
+ - const: qup-memory
+
+ required:
+ - reg
+ - clock-names
+ - clocks
+
+ "spi@[0-9a-f]+$":
+ type: object
+ description: GENI serial engine based SPI controller. SPI in master mode
+ supports up to 50MHz, up to four chip selects, programmable
+ data path from 4 bits to 32 bits and numerous protocol
+ variants.
+ allOf:
+ - $ref: /spi/spi-controller.yaml#
+
+ properties:
+ compatible:
+ enum:
+ - qcom,geni-spi
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ required:
+ - compatible
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+ "i2c@[0-9a-f]+$":
+ type: object
+ description: GENI serial engine based I2C controller.
+ allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+ properties:
+ compatible:
+ enum:
+ - qcom,geni-i2c
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ clock-frequency:
+ description: Desired I2C bus clock frequency in Hz.
+ default: 100000
+
+ required:
+ - compatible
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+ "serial@[0-9a-f]+$":
+ type: object
+ description: GENI Serial Engine based UART Controller.
+ allOf:
+ - $ref: /schemas/serial.yaml#
+
+ properties:
+ compatible:
+ enum:
+ - qcom,geni-uart
+ - qcom,geni-debug-uart
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: UART core irq
+ - description: Wakeup irq (RX GPIO)
+
+ required:
+ - compatible
+ - interrupts
+
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ i2c0: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0xa94000 0 0x4000>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_i2c_5_active>;
+ pinctrl-1 = <&qup_1_i2c_5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart0: serial@a88000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0xa88000 0 0x7000>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_uart_3_active>;
+ pinctrl-1 = <&qup_1_uart_3_sleep>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
index 76ee695097bf..fb78967ee17b 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
@@ -35,23 +35,21 @@ properties:
adi,decimation-ratio:
description: |
This property set's the decimation ratio of PDM to PCM audio data.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [64, 32, 16]
- default: 64
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [64, 32, 16]
+ default: 64
adi,pdm-clk-map:
description: |
The ADAU7118 has two PDM clocks for the four Inputs. Each input must be
assigned to one of these two clocks. This property set's the mapping
between the clocks and the inputs.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 4
- maxItems: 4
- items:
- maximum: 1
- default: [0, 0, 1, 1]
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 4
+ maxItems: 4
+ items:
+ maximum: 1
+ default: [0, 0, 1, 1]
required:
- "#sound-dai-cells"
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
index ea1d2efb2aaa..be390accdd07 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
@@ -57,32 +57,31 @@ properties:
A list of the connections between audio components. Each entry
is a pair of strings, the first being the connection's sink, the
second being the connection's source.
- allOf:
- - $ref: /schemas/types.yaml#definitions/non-unique-string-array
- - minItems: 2
- maxItems: 18
- items:
- enum:
- # Audio Pins on the SoC
- - HP
- - HPCOM
- - LINEIN
- - LINEOUT
- - MIC1
- - MIC2
- - MIC3
-
- # Microphone Biases from the SoC
- - HBIAS
- - MBIAS
-
- # Board Connectors
- - Headphone
- - Headset Mic
- - Line In
- - Line Out
- - Mic
- - Speaker
+ $ref: /schemas/types.yaml#definitions/non-unique-string-array
+ minItems: 2
+ maxItems: 18
+ items:
+ enum:
+ # Audio Pins on the SoC
+ - HP
+ - HPCOM
+ - LINEIN
+ - LINEOUT
+ - MIC1
+ - MIC2
+ - MIC3
+
+ # Microphone Biases from the SoC
+ - HBIAS
+ - MBIAS
+
+ # Board Connectors
+ - Headphone
+ - Headset Mic
+ - Line In
+ - Line Out
+ - Mic
+ - Speaker
allwinner,codec-analog-controls:
$ref: /schemas/types.yaml#/definitions/phandle
diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
index a61bccf915d8..f9344adaf6c2 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
@@ -86,7 +86,7 @@ examples:
aiu: audio-controller@5400 {
compatible = "amlogic,aiu-gxl", "amlogic,aiu";
#sound-dai-cells = <2>;
- reg = <0x0 0x5400 0x0 0x2ac>;
+ reg = <0x5400 0x2ac>;
interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "i2s", "spdif";
@@ -110,4 +110,3 @@ examples:
"spdif_mclk_sel";
resets = <&reset RESET_AIU>;
};
-
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
index f778d3371fde..51a0c30e10f9 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
@@ -45,7 +45,7 @@ examples:
toacodec: audio-controller@740 {
compatible = "amlogic,g12a-toacodec";
- reg = <0x0 0x740 0x0 0x4>;
+ reg = <0x740 0x4>;
#sound-dai-cells = <1>;
resets = <&clkc_audio AUD_RESET_TOACODEC>;
};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
index b7c38c2b5b54..04014e658c90 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
@@ -49,10 +49,9 @@ examples:
acodec: audio-controller@32000 {
compatible = "amlogic,t9015";
- reg = <0x0 0x32000 0x0 0x14>;
+ reg = <0x32000 0x14>;
#sound-dai-cells = <0>;
clocks = <&clkc CLKID_AUDIO_CODEC>;
clock-names = "pclk";
resets = <&reset RESET_AUDIO_CODEC>;
};
-
diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
deleted file mode 100644
index 41ae2699f07a..000000000000
--- a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the audio portion
-of the driver.
-
-This binding must be part of the Lochnagar MFD binding:
- [4] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
- - compatible : One of the following strings:
- "cirrus,lochnagar2-soundcard"
-
- - #sound-dai-cells : Must be set to 1.
-
- - clocks : Contains an entry for each entry in clock-names.
- - clock-names : Must include the following clocks:
- "mclk" Master clock source for the sound card, should normally
- be set to LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar
- clock driver.
-
-Example:
-
-lochnagar-sc {
- compatible = "cirrus,lochnagar2-soundcard";
-
- #sound-dai-cells = <1>;
-
- clocks = <&lochnagar_clk LOCHNAGAR_SOUNDCARD_MCLK>;
- clock-names = "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..cea612d3d4a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of various
+ application processor systems to provide a full evaluation platform.
+ Audio system topology, clocking and power can all be controlled through
+ the Lochnagar, allowing the device under test to be used in a variety of
+ possible use cases.
+
+ This binding document describes the binding for the audio portion of the
+ driver.
+
+ This binding must be part of the Lochnagar MFD binding:
+ [1] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-soundcard
+
+ '#sound-dai-cells':
+ description:
+ The first cell indicating the audio interface.
+ const: 1
+
+ clocks:
+ description:
+ Master clock source for the sound card, should normally be set to
+ LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar clock driver.
+ maxItems: 1
+
+ clock-names:
+ const: mclk
+
+required:
+ - compatible
+ - '#sound-dai-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
new file mode 100644
index 000000000000..c4cd58b5acd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ This describes audio configuration bindings for these codecs.
+
+ See also the core bindings for the parent MFD driver:
+
+ Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+
+ and defines for values used in these bindings:
+
+ include/dt-bindings/sound/madera.h
+
+ The properties are all contained in the parent MFD node.
+
+properties:
+ '#sound-dai-cells':
+ description:
+ The first cell indicating the audio interface.
+ const: 1
+
+ cirrus,inmode:
+ description:
+ A list of input mode settings for each input. A maximum
+ of 24 cells, with four cells per input in the order INnAL,
+ INnAR INnBL INnBR. For non-muxed inputs the first two cells
+ for that input set the mode for the left and right channel
+ and the second two cells must be 0. For muxed inputs the
+ first two cells for that input set the mode of the left and
+ right A inputs and the second two cells set the mode of the
+ left and right B inputs. Valid mode values are one of the
+ MADERA_INMODE_xxx. If the array is shorter than the number
+ of inputs the unspecified inputs default to MADERA_INMODE_DIFF.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 24
+ items:
+ minimum: 0
+ maximum: 1
+ default: 0
+
+ cirrus,out-mono:
+ description:
+ Mono bit for each output, maximum of six cells if the array
+ is shorter outputs will be set to stereo.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 6
+ items:
+ minimum: 0
+ maximum: 1
+ default: 0
+
+ cirrus,dmic-ref:
+ description: |
+ Indicates how the MICBIAS pins have been externally connected
+ to DMICs on each input, one cell per input.
+
+ <IN1 IN2 IN3 ...>
+
+ A value of 0 indicates MICVDD and is the default,
+ other values depend on the codec: For CS47L35 one of the
+ CS47L35_DMIC_REF_xxx values For all other codecs one of
+ the MADERA_DMIC_REF_xxx values Also see the datasheet for a
+ description of the INn_DMIC_SUP field.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 6
+ items:
+ minimum: 0
+ maximum: 3
+ default: 0
+
+ cirrus,max-channels-clocked:
+ description:
+ Maximum number of channels that I2S clocks will be generated
+ for. Useful when clock master for systems where the I2S bus
+ has multiple data lines. One cell for each AIF, use a value
+ of zero for AIFs that should be handled normally.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ items:
+ default: 0
+
+ cirrus,pdm-fmt:
+ description:
+ PDM speaker data format, must contain 2 cells (OUT5 and
+ OUT6). See the PDM_SPKn_FMT field in the datasheet for a
+ description of this value. The second cell is ignored for
+ codecs that do not have OUT6.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+
+ cirrus,pdm-mute:
+ description: |
+ PDM mute format, must contain 2 cells (OUT5 and OUT6). See the
+ PDM_SPKn_CTRL_1 register in the datasheet for a description
+ of this value. The second cell is ignored for codecs that
+ do not have OUT6.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
diff --git a/Documentation/devicetree/bindings/sound/madera.txt b/Documentation/devicetree/bindings/sound/madera.txt
deleted file mode 100644
index 5e669ce552f4..000000000000
--- a/Documentation/devicetree/bindings/sound/madera.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Cirrus Logic Madera class audio codecs
-
-This describes audio configuration bindings for these codecs.
-
-See also the core bindings for the parent MFD driver:
-See Documentation/devicetree/bindings/mfd/madera.txt
-
-and defines for values used in these bindings:
-include/dt-bindings/sound/madera.h
-
-These properties are all contained in the parent MFD node.
-
-Optional properties:
- - cirrus,dmic-ref : Indicates how the MICBIAS pins have been externally
- connected to DMICs on each input, one cell per input.
- <IN1 IN2 IN3 ...>
- A value of 0 indicates MICVDD and is the default, other values depend on the
- codec:
- For CS47L35 one of the CS47L35_DMIC_REF_xxx values
- For all other codecs one of the MADERA_DMIC_REF_xxx values
- Also see the datasheet for a description of the INn_DMIC_SUP field.
-
- - cirrus,inmode : A list of input mode settings for each input. A maximum of
- 16 cells, with four cells per input in the order INnAL, INnAR INnBL INnBR.
- For non-muxed inputs the first two cells for that input set the mode for
- the left and right channel and the second two cells must be 0.
- For muxed inputs the first two cells for that input set the mode of the
- left and right A inputs and the second two cells set the mode of the left
- and right B inputs.
- Valid mode values are one of the MADERA_INMODE_xxx. If the array is shorter
- than the number of inputs the unspecified inputs default to
- MADERA_INMODE_DIFF.
-
- - cirrus,out-mono : Mono bit for each output, maximum of six cells if the
- array is shorter outputs will be set to stereo.
-
- - cirrus,max-channels-clocked : Maximum number of channels that I2S clocks
- will be generated for. Useful when clock master for systems where the I2S
- bus has multiple data lines.
- One cell for each AIF, use a value of zero for AIFs that should be handled
- normally.
-
- - cirrus,pdm-fmt : PDM speaker data format, must contain 2 cells
- (OUT5 and OUT6). See the PDM_SPKn_FMT field in the datasheet for a
- description of this value.
- The second cell is ignored for codecs that do not have OUT6.
-
- - cirrus,pdm-mute : PDM mute format, must contain 2 cells
- (OUT5 and OUT6). See the PDM_SPKn_CTRL_1 register in the datasheet for a
- description of this value.
- The second cell is ignored for codecs that do not have OUT6.
-
-Example:
-
-cs47l35@0 {
- compatible = "cirrus,cs47l35";
-
- cirrus,dmic-ref = <0 0 CS47L35_DMIC_REF_MICBIAS1B 0>;
- cirrus,inmode = <
- MADERA_INMODE_DMIC MADERA_INMODE_DMIC /* IN1A digital */
- MADERA_INMODE_SE MADERA_INMODE_SE /* IN1B single-ended */
- MADERA_INMODE_DIFF MADERA_INMODE_DIFF /* IN2 differential */
- 0 0 /* not used on this codec */
- >;
- cirrus,out-mono = <0 0 0 0 0 0>;
- cirrus,max-channels-clocked = <2 0 0>;
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
index a495d5fc0d23..e8f716b5f875 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -102,8 +102,7 @@ properties:
gpio@42:
type: object
- allOf:
- - $ref: ../gpio/qcom,wcd934x-gpio.yaml#
+ $ref: ../gpio/qcom,wcd934x-gpio.yaml#
patternProperties:
"^.*@[0-9a-f]+$":
diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
index d1b65554e681..8a4406be387a 100644
--- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/sound/renesas,fsi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Renesas FSI Sound Driver Device Tree Bindings
+title: Renesas FIFO-buffered Serial Interface (FSI)
maintainers:
- Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
@@ -17,16 +17,16 @@ properties:
oneOf:
# for FSI2 SoC
- items:
- - enum:
- - renesas,fsi2-sh73a0
- - renesas,fsi2-r8a7740
- - enum:
- - renesas,sh_fsi2
+ - enum:
+ - renesas,fsi2-sh73a0 # SH-Mobile AG5
+ - renesas,fsi2-r8a7740 # R-Mobile A1
+ - enum:
+ - renesas,sh_fsi2
# for Generic
- items:
- - enum:
- - renesas,sh_fsi
- - renesas,sh_fsi2
+ - enum:
+ - renesas,sh_fsi
+ - renesas,sh_fsi2
reg:
maxItems: 1
@@ -34,6 +34,15 @@ properties:
interrupts:
maxItems: 1
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 1
+
fsia,spdif-connection:
$ref: /schemas/types.yaml#/definitions/flag
description: FSI is connected by S/PDIF
@@ -62,16 +71,24 @@ required:
- compatible
- reg
- interrupts
+ - clocks
+ - power-domains
+ - '#sound-dai-cells'
additionalProperties: false
examples:
- |
- sh_fsi2: sound@ec230000 {
+ #include <dt-bindings/clock/r8a7740-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ sh_fsi2: sound@fe1f0000 {
compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
- reg = <0xec230000 0x400>;
- interrupts = <0 146 0x4>;
+ reg = <0xfe1f0000 0x400>;
+ interrupts = <GIC_SPI 9 0x4>;
+ clocks = <&mstp3_clks R8A7740_CLK_FSI>;
+ power-domains = <&pd_a4mp>;
+ #sound-dai-cells = <1>;
fsia,spdif-connection;
fsia,stream-mode-support;
fsia,use-internal-clock;
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
index 10f9d3ad0d48..acb2b888dbfc 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -62,15 +62,13 @@ properties:
maxItems: 1
rockchip,capture-channels:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 2
description:
Max capture channels, if not set, 2 channels default.
rockchip,playback-channels:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 8
description:
Max playback channels, if not set, 8 channels default.
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index 306ac3d006dc..c5b5b4260496 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -49,9 +49,8 @@ properties:
0 - Mic bias is set to VREF
1 - Mic bias is set to VREF × 1.096
6 - Mic bias is set to AVDD
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 6]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 6]
ti,vref-source:
description: |
@@ -59,9 +58,8 @@ properties:
0 - Set VREF to 2.75V
1 - Set VREF to 2.5V
2 - Set VREF to 1.375V
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
ti,pdm-edge-select:
description: |
diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt
deleted file mode 100644
index e172c62dc2df..000000000000
--- a/Documentation/devicetree/bindings/sound/wlf,arizona.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Cirrus Logic Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-This document lists sound specific bindings, see the primary binding
-document:
- ../mfd/arizona.txt
-
-Optional properties:
-
- - wlf,inmode : A list of INn_MODE register values, where n is the number
- of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
- 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
- If present, values must be specified less than or equal to the number of
- input signals. If values less than the number of input signals, elements
- that have not been specified are set to 0 by default. Entries are:
- <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
- <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
- - wlf,out-mono : A list of boolean values indicating whether each output is
- mono or stereo. Position within the list indicates the output affected
- (eg. First entry in the list corresponds to output 1). A non-zero value
- indicates a mono output. If present, the number of values should be less
- than or equal to the number of outputs, if less values are supplied the
- additional outputs will be treated as stereo.
-
- - wlf,dmic-ref : DMIC reference voltage source for each input, can be
- selected from either MICVDD or one of the MICBIAS's, defines
- (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
- present, the number of values should be less than or equal to the
- number of inputs, unspecified inputs will use the chip default.
-
- - wlf,max-channels-clocked : The maximum number of channels to be clocked on
- each AIF, useful for I2S systems with multiple data lines being mastered.
- Specify one cell for each AIF to be configured, specify zero for AIFs that
- should be handled normally.
- If present, number of cells must be less than or equal to the number of
- AIFs. If less than the number of AIFs, for cells that have not been
- specified the corresponding AIFs will be treated as default setting.
-
- - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
- See the datasheet for values.
- The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
- wm8998, wm1814)
-
- - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
- See the datasheet for values.
- The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
- wm8998, wm1814)
-
- - wlf,out-volume-limit : The volume limit value that should be applied to each
- output channel. See the datasheet for exact values. Channels are specified
- in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.
diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml
new file mode 100644
index 000000000000..22d54be7900a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ These devices are audio SoCs with extensive digital capabilities and a range
+ of analogue I/O.
+
+ This document lists sound specific bindings, see the primary binding
+ document ../mfd/arizona.yaml
+
+properties:
+ '#sound-dai-cells':
+ description:
+ The first cell indicating the audio interface.
+ const: 1
+
+ wlf,inmode:
+ description:
+ A list of INn_MODE register values, where n is the number of input
+ signals. Valid values are 0 (Differential), 1 (Single-ended) and
+ 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by
+ default. If present, values must be specified less than or equal
+ to the number of input signals. If values less than the number of
+ input signals, elements that have not been specified are set to 0 by
+ default. Entries are <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280,
+ wm8997) and <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ items:
+ minimum: 0
+ maximum: 2
+ default: 0
+
+ wlf,out-mono:
+ description:
+ A list of boolean values indicating whether each output is mono
+ or stereo. Position within the list indicates the output affected
+ (eg. First entry in the list corresponds to output 1). A non-zero
+ value indicates a mono output. If present, the number of values
+ should be less than or equal to the number of outputs, if less values
+ are supplied the additional outputs will be treated as stereo.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 6
+ items:
+ minimum: 0
+ maximum: 1
+ default: 0
+
+ wlf,dmic-ref:
+ description:
+ DMIC reference voltage source for each input, can be selected from
+ either MICVDD or one of the MICBIAS's, defines (ARIZONA_DMIC_xxxx)
+ are provided in dt-bindings/mfd/arizona.h. If present, the number
+ of values should be less than or equal to the number of inputs,
+ unspecified inputs will use the chip default.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ items:
+ minimum: 0
+ maximum: 3
+ default: 0
+
+ wlf,max-channels-clocked:
+ description:
+ The maximum number of channels to be clocked on each AIF, useful for
+ I2S systems with multiple data lines being mastered. Specify one
+ cell for each AIF to be configured, specify zero for AIFs that should
+ be handled normally. If present, number of cells must be less than
+ or equal to the number of AIFs. If less than the number of AIFs, for
+ cells that have not been specified the corresponding AIFs will be
+ treated as default setting.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 3
+ items:
+ default: 0
+
+ wlf,spk-fmt:
+ description:
+ PDM speaker data format, must contain 2 cells (OUT5 and OUT6). See
+ the datasheet for values. The second cell is ignored for codecs that
+ do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+
+ wlf,spk-mute:
+ description:
+ PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). See
+ the datasheet for values. The second cell is ignored for codecs that
+ do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+
+ wlf,out-volume-limit:
+ description:
+ The volume limit value that should be applied to each output
+ channel. See the datasheet for exact values. Channels are specified
+ in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 12
diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
new file mode 100644
index 000000000000..0abcac385e7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/marvell,mmp2-ssp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PXA2xx SSP SPI Controller bindings
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: marvell,mmp2-ssp
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ ready-gpios:
+ description: |
+ GPIO used to signal a SPI master that the FIFO is filled and we're
+ ready to service a transfer. Only useful in slave mode.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+dependencies:
+ ready-gpios: [ spi-slave ]
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/marvell,mmp2.h>
+ spi@d4035000 {
+ compatible = "marvell,mmp2-ssp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xd4035000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP0>;
+ interrupts = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index 5c16cf59ca00..0178831b0662 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Qualcomm Quad Serial Peripheral Interface (QSPI)
maintainers:
- - Mukesh Savaliya <msavaliy@codeaurora.org>
- - Akash Asthana <akashast@codeaurora.org>
+ - Mukesh Savaliya <msavaliy@codeaurora.org>
+ - Akash Asthana <akashast@codeaurora.org>
-description:
- The QSPI controller allows SPI protocol communication in single, dual, or quad
- wire transmission modes for read/write access to slaves such as NOR flash.
+description: The QSPI controller allows SPI protocol communication in single,
+ dual, or quad wire transmission modes for read/write access to slaves such
+ as NOR flash.
allOf:
- $ref: /spi/spi-controller.yaml#
diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
index c429cf4bea5b..f492cb9fea12 100644
--- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -16,8 +16,8 @@ properties:
compatible:
items:
- enum:
- - renesas,hspi-r8a7778 # R-Car M1A
- - renesas,hspi-r8a7779 # R-Car H1
+ - renesas,hspi-r8a7778 # R-Car M1A
+ - renesas,hspi-r8a7779 # R-Car H1
- const: renesas,hspi
reg:
diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
index b6c1dd2a9c5e..e84edcf8b332 100644
--- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -96,43 +96,39 @@ properties:
renesas,dtdl:
description: delay sync signal (setup) in transmit mode.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum:
- - 0 # no bit delay
- - 50 # 0.5-clock-cycle delay
- - 100 # 1-clock-cycle delay
- - 150 # 1.5-clock-cycle delay
- - 200 # 2-clock-cycle delay
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # no bit delay
+ - 50 # 0.5-clock-cycle delay
+ - 100 # 1-clock-cycle delay
+ - 150 # 1.5-clock-cycle delay
+ - 200 # 2-clock-cycle delay
renesas,syncdl:
description: delay sync signal (hold) in transmit mode
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum:
- - 0 # no bit delay
- - 50 # 0.5-clock-cycle delay
- - 100 # 1-clock-cycle delay
- - 150 # 1.5-clock-cycle delay
- - 200 # 2-clock-cycle delay
- - 300 # 3-clock-cycle delay
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # no bit delay
+ - 50 # 0.5-clock-cycle delay
+ - 100 # 1-clock-cycle delay
+ - 150 # 1.5-clock-cycle delay
+ - 200 # 2-clock-cycle delay
+ - 300 # 3-clock-cycle delay
renesas,tx-fifo-size:
# deprecated for soctype-specific bindings
description: |
Override the default TX fifo size. Unit is words. Ignored if 0.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maxItems: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
default: 64
renesas,rx-fifo-size:
# deprecated for soctype-specific bindings
description: |
Override the default RX fifo size. Unit is words. Ignored if 0.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maxItems: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
default: 64
required:
@@ -149,7 +145,7 @@ examples:
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof";
- reg = <0 0xe6e20000 0 0x0064>;
+ reg = <0xe6e20000 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index d8e5509a7081..c6a2f543648b 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -115,24 +115,22 @@ patternProperties:
Maximum SPI clocking speed of the device in Hz.
spi-rx-bus-width:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 1, 2, 4, 8 ]
- - default: 1
description:
Bus width to the SPI bus used for read transfers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8]
+ default: 1
spi-rx-delay-us:
description:
Delay, in microseconds, after a read transfer.
spi-tx-bus-width:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 1, 2, 4, 8 ]
- - default: 1
description:
Bus width to the SPI bus used for write transfers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8]
+ default: 1
spi-tx-delay-us:
description:
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
index dfb697c69341..22999024477f 100644
--- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -51,7 +51,7 @@ properties:
pl022,rt:
description: indicates the controller should run the message pump with realtime
- priority to minimise the transfer latency on the bus (boolean)
+ priority to minimise the transfer latency on the bus (boolean)
type: boolean
dmas:
@@ -80,55 +80,48 @@ patternProperties:
properties:
pl022,interface:
description: SPI interface type
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum:
- - 0 # SPI
- - 1 # Texas Instruments Synchronous Serial Frame Format
- - 2 # Microwire (Half Duplex)
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum:
+ - 0 # SPI
+ - 1 # Texas Instruments Synchronous Serial Frame Format
+ - 2 # Microwire (Half Duplex)
pl022,com-mode:
description: Specifies the transfer mode
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum:
- - 0 # interrupt mode
- - 1 # polling mode
- - 2 # DMA mode
- default: 1
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum:
+ - 0 # interrupt mode
+ - 1 # polling mode
+ - 2 # DMA mode
+ default: 1
pl022,rx-level-trig:
description: Rx FIFO watermark level
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 4
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 4
pl022,tx-level-trig:
description: Tx FIFO watermark level
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 4
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 4
pl022,ctrl-len:
description: Microwire interface - Control length
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0x03
- maximum: 0x1f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0x03
+ maximum: 0x1f
pl022,wait-state:
description: Microwire interface - Wait state
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum: [ 0, 1 ]
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum: [0, 1]
pl022,duplex:
description: Microwire interface - Full/Half duplex
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum: [ 0, 1 ]
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum: [0, 1]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
deleted file mode 100644
index e30e0c2a4bce..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-PXA2xx SSP SPI Controller
-
-Required properties:
-- compatible: Must be "marvell,mmp2-ssp".
-- reg: Offset and length of the device's register set.
-- interrupts: Should be the interrupt number.
-- clocks: Should contain a single entry describing the clock input.
-- #address-cells: Number of cells required to define a chip select address.
-- #size-cells: Should be zero.
-
-Optional properties:
-- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
- Documentation/devicetree/bindings/spi/spi-bus.txt
-- spi-slave: Empty property indicating the SPI controller is used in slave mode.
-- ready-gpios: GPIO used to signal a SPI master that the FIFO is filled
- and we're ready to service a transfer. Only useful in slave mode.
-
-Child nodes represent devices on the SPI bus
- See ../spi/spi-bus.txt
-
-Example:
- ssp1: spi@d4035000 {
- compatible = "marvell,mmp2-ssp";
- reg = <0xd4035000 0x1000>;
- clocks = <&soc_clocks MMP2_CLK_SSP0>;
- interrupts = <0>;
- };
diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
index 140e4351a19f..4932205d1cba 100644
--- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
@@ -32,11 +32,10 @@ properties:
https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi
reg:
- maxItems: 1
-
- description:
- Physical base address and size of SPI registers map
- A second (optional) range can indicate memory mapped flash
+ minItems: 1
+ items:
+ - description: SPI registers region
+ - description: Memory mapped flash region
interrupts:
maxItems: 1
@@ -50,18 +49,16 @@ properties:
sifive,fifo-depth:
description:
Depth of hardware queues; defaults to 8
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum: [ 8 ]
- - default: 8
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum: [8]
+ default: 8
sifive,max-bits-per-word:
description:
Maximum bits per word; defaults to 8
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8 ]
- - default: 8
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
+ default: 8
required:
- compatible
@@ -73,7 +70,7 @@ examples:
- |
spi: spi@10040000 {
compatible = "sifive,fu540-c000-spi", "sifive,spi0";
- reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>;
+ reg = <0x10040000 0x1000>, <0x20000000 0x10000000>;
interrupt-parent = <&plic>;
interrupts = <51>;
clocks = <&tlclk>;
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
index 3665a5fe6b7f..1a342ce1f798 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -24,8 +24,8 @@ properties:
reg-names:
items:
- - const: qspi
- - const: qspi_mm
+ - const: qspi
+ - const: qspi_mm
clocks:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
index 4b5509436588..f5825935fd22 100644
--- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -29,8 +29,8 @@ properties:
- const: allwinner,sun4i-a10-system-control
- const: allwinner,sun5i-a13-system-control
- items:
- - const: allwinner,sun7i-a20-system-control
- - const: allwinner,sun4i-a10-system-control
+ - const: allwinner,sun7i-a20-system-control
+ - const: allwinner,sun4i-a10-system-control
- const: allwinner,sun8i-a23-system-control
- const: allwinner,sun8i-h3-system-control
- const: allwinner,sun50i-a64-sram-controller
@@ -38,11 +38,11 @@ properties:
- const: allwinner,sun50i-a64-system-control
- const: allwinner,sun50i-h5-system-control
- items:
- - const: allwinner,sun50i-h6-system-control
- - const: allwinner,sun50i-a64-system-control
+ - const: allwinner,sun50i-h6-system-control
+ - const: allwinner,sun50i-a64-system-control
- items:
- - const: allwinner,suniv-f1c100s-system-control
- - const: allwinner,sun4i-a10-system-control
+ - const: allwinner,suniv-f1c100s-system-control
+ - const: allwinner,sun4i-a10-system-control
reg:
maxItems: 1
@@ -69,44 +69,44 @@ patternProperties:
- const: allwinner,sun4i-a10-sram-d
- const: allwinner,sun50i-a64-sram-c
- items:
- - const: allwinner,sun5i-a13-sram-a3-a4
- - const: allwinner,sun4i-a10-sram-a3-a4
+ - const: allwinner,sun5i-a13-sram-a3-a4
+ - const: allwinner,sun4i-a10-sram-a3-a4
- items:
- - const: allwinner,sun7i-a20-sram-a3-a4
- - const: allwinner,sun4i-a10-sram-a3-a4
+ - const: allwinner,sun7i-a20-sram-a3-a4
+ - const: allwinner,sun4i-a10-sram-a3-a4
- items:
- - const: allwinner,sun5i-a13-sram-c1
- - const: allwinner,sun4i-a10-sram-c1
+ - const: allwinner,sun5i-a13-sram-c1
+ - const: allwinner,sun4i-a10-sram-c1
- items:
- - const: allwinner,sun7i-a20-sram-c1
- - const: allwinner,sun4i-a10-sram-c1
+ - const: allwinner,sun7i-a20-sram-c1
+ - const: allwinner,sun4i-a10-sram-c1
- items:
- - const: allwinner,sun8i-a23-sram-c1
- - const: allwinner,sun4i-a10-sram-c1
+ - const: allwinner,sun8i-a23-sram-c1
+ - const: allwinner,sun4i-a10-sram-c1
- items:
- - const: allwinner,sun8i-h3-sram-c1
- - const: allwinner,sun4i-a10-sram-c1
+ - const: allwinner,sun8i-h3-sram-c1
+ - const: allwinner,sun4i-a10-sram-c1
- items:
- - const: allwinner,sun50i-a64-sram-c1
- - const: allwinner,sun4i-a10-sram-c1
+ - const: allwinner,sun50i-a64-sram-c1
+ - const: allwinner,sun4i-a10-sram-c1
- items:
- - const: allwinner,sun50i-h5-sram-c1
- - const: allwinner,sun4i-a10-sram-c1
+ - const: allwinner,sun50i-h5-sram-c1
+ - const: allwinner,sun4i-a10-sram-c1
- items:
- - const: allwinner,sun50i-h6-sram-c1
- - const: allwinner,sun4i-a10-sram-c1
+ - const: allwinner,sun50i-h6-sram-c1
+ - const: allwinner,sun4i-a10-sram-c1
- items:
- - const: allwinner,sun5i-a13-sram-d
- - const: allwinner,sun4i-a10-sram-d
+ - const: allwinner,sun5i-a13-sram-d
+ - const: allwinner,sun4i-a10-sram-d
- items:
- - const: allwinner,sun7i-a20-sram-d
- - const: allwinner,sun4i-a10-sram-d
+ - const: allwinner,sun7i-a20-sram-d
+ - const: allwinner,sun4i-a10-sram-d
- items:
- - const: allwinner,suniv-f1c100s-sram-d
- - const: allwinner,sun4i-a10-sram-d
+ - const: allwinner,suniv-f1c100s-sram-d
+ - const: allwinner,sun4i-a10-sram-d
- items:
- - const: allwinner,sun50i-h6-sram-c
- - const: allwinner,sun50i-a64-sram-c
+ - const: allwinner,sun50i-h6-sram-c
+ - const: allwinner,sun50i-a64-sram-c
required:
- "#address-cells"
diff --git a/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt b/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt
deleted file mode 100644
index 6b42fda306ff..000000000000
--- a/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Rockchip SRAM for pmu:
-------------------------------
-
-The sram of pmu is used to store the function of resume from maskrom(the 1st
-level loader). This is a common use of the "pmu-sram" because it keeps power
-even in low power states in the system.
-
-Required node properties:
-- compatible : should be "rockchip,rk3288-pmu-sram"
-- reg : physical base address and the size of the registers window
-
-Example:
- sram@ff720000 {
- compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
- reg = <0xff720000 0x1000>;
- };
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
index 7b83cc6c9bfa..19d116ff9ddc 100644
--- a/Documentation/devicetree/bindings/sram/sram.yaml
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -29,6 +29,7 @@ properties:
enum:
- mmio-sram
- atmel,sama5d2-securam
+ - rockchip,rk3288-pmu-sram
reg:
maxItems: 1
@@ -73,6 +74,8 @@ patternProperties:
- allwinner,sun50i-a64-sram-c
- amlogic,meson8-smp-sram
- amlogic,meson8b-smp-sram
+ - amlogic,meson-gxbb-scp-shmem
+ - amlogic,meson-axg-scp-shmem
- renesas,smp-sram
- rockchip,rk3066-smp-sram
- samsung,exynos4210-sysram
@@ -118,9 +121,18 @@ patternProperties:
required:
- compatible
- reg
- - "#address-cells"
- - "#size-cells"
- - ranges
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-pmu-sram
+
+else:
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
additionalProperties: false
@@ -224,6 +236,16 @@ examples:
};
- |
+ // Rockchip's rk3288 SoC uses the sram of pmu to store the function of
+ // resume from maskrom(the 1st level loader). This is a common use of
+ // the "pmu-sram" because it keeps power even in low power states
+ // in the system.
+ sram@ff720000 {
+ compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+ reg = <0xff720000 0x1000>;
+ };
+
+ - |
// Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
// primary core (cpu0). Once the core gets powered up it checks if a magic
// value is set at a specific location. If it is then the BROM will jump
diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.rst
index 98bee6240b65..0aab2b3f16d0 100644
--- a/Documentation/devicetree/bindings/submitting-patches.txt
+++ b/Documentation/devicetree/bindings/submitting-patches.rst
@@ -1,13 +1,17 @@
+.. SPDX-License-Identifier: GPL-2.0
- Submitting devicetree (DT) binding patches
+==========================================
+Submitting devicetree (DT) binding patches
+==========================================
I. For patch submitters
+=======================
0) Normal patch submission rules from Documentation/process/submitting-patches.rst
applies.
1) The Documentation/ and include/dt-bindings/ portion of the patch should
- be a separate patch. The preferred subject prefix for binding patches is:
+ be a separate patch. The preferred subject prefix for binding patches is::
"dt-bindings: <binding dir>: ..."
@@ -17,7 +21,7 @@ I. For patch submitters
2) DT binding files are written in DT schema format using json-schema
vocabulary and YAML file format. The DT binding files must pass validation
- by running:
+ by running::
make dt_binding_check
@@ -60,6 +64,7 @@ I. For patch submitters
II. For kernel maintainers
+==========================
1) If you aren't comfortable reviewing a given binding, reply to it and ask
the devicetree maintainers for guidance. This will help them prioritize
@@ -76,6 +81,7 @@ II. For kernel maintainers
kept with the driver using the binding.
III. Notes
+==========
0) Please see ...bindings/ABI.txt for details regarding devicetree ABI.
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index e43ec50bda37..999c6b365f1d 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal
properties:
compatible:
- items:
- - enum:
- - amlogic,g12a-cpu-thermal
- - amlogic,g12a-ddr-thermal
- - const: amlogic,g12a-thermal
+ items:
+ - enum:
+ - amlogic,g12a-cpu-thermal
+ - amlogic,g12a-ddr-thermal
+ - const: amlogic,g12a-thermal
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
deleted file mode 100644
index 823e4176eef8..000000000000
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
-
-Required properties:
-- compatible : must be one of following:
- - "fsl,imx6q-tempmon" for i.MX6Q,
- - "fsl,imx6sx-tempmon" for i.MX6SX,
- - "fsl,imx7d-tempmon" for i.MX7S/D.
-- interrupts : the interrupt output of the controller:
- i.MX6Q has one IRQ which will be triggered when temperature is higher than high threshold,
- i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
- when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
- is higher than panic threshold, system will auto reboot by SRC module.
-- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
- control registers, e.g. ANATOP on imx6q.
-- nvmem-cells: A phandle to the calibration cells provided by ocotp.
-- nvmem-cell-names: Should be "calib", "temp_grade".
-
-Deprecated properties:
-- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
- calibration data, e.g. OCOTP on imx6q. The details about calibration data
- can be found in SoC Reference Manual.
-
-Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips
-because it does not handle OCOTP clock requirements.
-
-Optional properties:
-- clocks : thermal sensor's clock source.
-
-Example:
-ocotp: ocotp@21bc000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,imx6sx-ocotp", "syscon";
- reg = <0x021bc000 0x4000>;
- clocks = <&clks IMX6SX_CLK_OCOTP>;
-
- tempmon_calib: calib@38 {
- reg = <0x38 4>;
- };
-
- tempmon_temp_grade: temp-grade@20 {
- reg = <0x20 4>;
- };
-};
-
-tempmon: tempmon {
- compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
-};
-
-Legacy method (Deprecated):
-tempmon {
- compatible = "fsl,imx6q-tempmon";
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks 172>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
new file mode 100644
index 000000000000..aedac1669998
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/imx-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX Thermal Binding
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6q-tempmon
+ - fsl,imx6sx-tempmon
+ - fsl,imx7d-tempmon
+
+ interrupts:
+ description: |
+ The interrupt output of the controller, i.MX6Q has IRQ_HIGH which
+ will be triggered when temperature is higher than high threshold,
+ i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW
+ and the other is IRQ_PANIC, when temperature is lower than low
+ threshold, IRQ_LOW will be triggered, when temperature is higher
+ than panic threshold, IRQ_PANIC will be triggered, and system can
+ be configured to auto reboot by SRC module for IRQ_PANIC. IRQ_HIGH,
+ IRQ_LOW and IRQ_PANIC share same interrupt output of controller.
+ maxItems: 1
+
+ nvmem-cells:
+ items:
+ - description: Phandle to the calibration data provided by ocotp
+ - description: Phandle to the temperature grade provided by ocotp
+
+ nvmem-cell-names:
+ items:
+ - const: calib
+ - const: temp_grade
+
+ fsl,tempmon:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: Phandle to anatop system controller node.
+
+ fsl,tempmon-data:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: |
+ Deprecated property, phandle pointer to fuse controller that contains
+ TEMPMON calibration data, e.g. OCOTP on imx6q. The details about
+ calibration data can be found in SoC Reference Manual.
+ deprecated: true
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - interrupts
+ - fsl,tempmon
+ - nvmem-cells
+ - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6sx-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ efuse@21bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6sx-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
+ };
+
+ anatop@20c8000 {
+ compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 54 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ tempmon {
+ compatible = "fsl,imx6sx-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
deleted file mode 100644
index 3629d3c7e76a..000000000000
--- a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* Thermal Monitoring Unit (TMU) on Freescale i.MX8MM SoC
-
-Required properties:
-- compatible : Must be "fsl,imx8mm-tmu" or "fsl,imx8mp-tmu".
-- reg : Address range of TMU registers.
-- clocks : TMU's clock source.
-- #thermal-sensor-cells : Should be 0 or 1. See ./thermal.txt for a description.
-
-Example:
-tmu: tmu@30260000 {
- compatible = "fsl,imx8mm-tmu";
- reg = <0x30260000 0x10000>;
- clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
- #thermal-sensor-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
new file mode 100644
index 000000000000..38852877b8e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/imx8mm-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Mini Thermal Binding
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+ i.MX8MM has TMU IP to allow temperature measurement, there are
+ currently two distinct major versions of the IP that is supported
+ by a single driver. The IP versions are named v1 and v2, v1 is
+ for i.MX8MM which has ONLY 1 sensor, v2 is for i.MX8MP which has
+ 2 sensors.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mm-tmu
+ - fsl,imx8mp-tmu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ description: |
+ Number of cells required to uniquely identify the thermal
+ sensors, 0 for ONLY one sensor and 1 for multiple sensors.
+ enum:
+ - 0
+ - 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mm-clock.h>
+
+ thermal-sensor@30260000 {
+ compatible = "fsl,imx8mm-tmu";
+ reg = <0x30260000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+ #thermal-sensor-cells = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 2ddd39d96766..d7be931b42d2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -73,12 +73,11 @@ properties:
- const: calib_sel
"#qcom,sensors":
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 1
- - maximum: 16
description:
Number of sensors enabled on this platform
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 16
"#thermal-sensor-cells":
const: 1
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
deleted file mode 100644
index 2993fa720195..000000000000
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver
-
-On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
-sensors (THS) which are the analog circuits for measuring temperature (Tj)
-inside the LSI.
-
-Required properties:
-- compatible : "renesas,<soctype>-thermal",
- Examples with soctypes are:
- - "renesas,r8a774a1-thermal" (RZ/G2M)
- - "renesas,r8a774b1-thermal" (RZ/G2N)
- - "renesas,r8a7795-thermal" (R-Car H3)
- - "renesas,r8a7796-thermal" (R-Car M3-W)
- - "renesas,r8a77961-thermal" (R-Car M3-W+)
- - "renesas,r8a77965-thermal" (R-Car M3-N)
- - "renesas,r8a77980-thermal" (R-Car V3H)
-- reg : Address ranges of the thermal registers. Each sensor
- needs one address range. Sorting must be done in
- increasing order according to datasheet, i.e.
- TSC1, TSC2, ...
-- clocks : Must contain a reference to the functional clock.
-- #thermal-sensor-cells : must be <1>.
-
-Optional properties:
-
-- interrupts : interrupts routed to the TSC (must be 3).
-- power-domain : Must contain a reference to the power domain. This
- property is mandatory if the thermal sensor instance
- is part of a controllable power domain.
-
-Example:
-
- tsc: thermal@e6198000 {
- compatible = "renesas,r8a7795-thermal";
- reg = <0 0xe6198000 0 0x100>,
- <0 0xe61a0000 0 0x100>,
- <0 0xe61a8000 0 0x100>;
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 522>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- #thermal-sensor-cells = <1>;
- };
-
- thermal-zones {
- sensor_thermal1: sensor-thermal1 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsc 0>;
-
- trips {
- sensor1_crit: sensor1-crit {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
new file mode 100644
index 000000000000..b1a55ae497de
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rcar-gen3-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 Thermal Sensor
+
+description:
+ On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
+ sensors (THS) which are the analog circuits for measuring temperature (Tj)
+ inside the LSI.
+
+maintainers:
+ - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+properties:
+ compatible:
+ enum:
+ - renesas,r8a774a1-thermal # RZ/G2M
+ - renesas,r8a774b1-thermal # RZ/G2N
+ - renesas,r8a7795-thermal # R-Car H3
+ - renesas,r8a7796-thermal # R-Car M3-W
+ - renesas,r8a77961-thermal # R-Car M3-W+
+ - renesas,r8a77965-thermal # R-Car M3-N
+ - renesas,r8a77980-thermal # R-Car V3H
+ reg:
+ minItems: 2
+ maxItems: 3
+ items:
+ - description: TSC1 registers
+ - description: TSC2 registers
+ - description: TSC3 registers
+
+ interrupts:
+ items:
+ - description: TEMP1 interrupt
+ - description: TEMP2 interrupt
+ - description: TEMP3 interrupt
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - power-domains
+ - resets
+ - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a7795-thermal";
+ reg = <0xe6198000 0x100>,
+ <0xe61a0000 0x100>,
+ <0xe61a8000 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ sensor_thermal: sensor-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
index d2f4f1b063ac..0994693d240f 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -20,6 +20,7 @@ properties:
- const: renesas,rcar-thermal # Generic without thermal-zone
- items:
- enum:
+ - renesas,thermal-r8a7742 # RZ/G1H
- renesas,thermal-r8a7743 # RZ/G1M
- renesas,thermal-r8a7744 # RZ/G1N
- const: renesas,rcar-gen2-thermal # Generic thermal-zone
@@ -94,8 +95,8 @@ examples:
thermal@e61f0000 {
compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
- reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
- <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
+ reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+ <0xe61f0200 0x38>, <0xe61f0300 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
power-domains = <&pd_c5>;
@@ -111,7 +112,7 @@ examples:
compatible = "renesas,thermal-r8a7790",
"renesas,rcar-gen2-thermal",
"renesas,rcar-thermal";
- reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+ reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
new file mode 100644
index 000000000000..bb9594bb2cf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/socionext,uniphier-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier thermal monitor
+
+description: |
+ This describes the devicetree bindings for thermal monitor supported by
+ PVT(Process, Voltage and Temperature) monitoring unit implemented on
+ Socionext UniPhier SoCs.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pxs2-thermal
+ - socionext,uniphier-ld20-thermal
+ - socionext,uniphier-pxs3-thermal
+
+ interrupts:
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ const: 0
+
+ socionext,tmod-calibration:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - maxItems: 2
+ description:
+ A pair of calibrated values referred from PVT, in case that the values
+ aren't set on SoC, like a reference board.
+
+required:
+ - compatible
+ - interrupts
+ - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ // The UniPhier thermal should be a subnode of a "syscon" compatible node.
+
+ sysctrl@61840000 {
+ compatible = "socionext,uniphier-ld20-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0x61840000 0x10000>;
+
+ pvtctl: thermal {
+ compatible = "socionext,uniphier-ld20-thermal";
+ interrupts = <0 3 1>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
index 058c4cc06ba6..af2ff930646a 100644
--- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
@@ -83,7 +83,7 @@ examples:
- |
ap_thm0: thermal@32200000 {
compatible = "sprd,ums512-thermal";
- reg = <0 0x32200000 0 0x10000>;
+ reg = <0x32200000 0x10000>;
clock-names = "enable";
clocks = <&aonapb_gate 32>;
#thermal-sensor-cells = <1>;
diff --git a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
deleted file mode 100644
index ceb92a95727a..000000000000
--- a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* UniPhier Thermal bindings
-
-This describes the devicetree bindings for thermal monitor supported by
-PVT(Process, Voltage and Temperature) monitoring unit implemented on Socionext
-UniPhier SoCs.
-
-Required properties:
-- compatible :
- - "socionext,uniphier-pxs2-thermal" : For UniPhier PXs2 SoC
- - "socionext,uniphier-ld20-thermal" : For UniPhier LD20 SoC
- - "socionext,uniphier-pxs3-thermal" : For UniPhier PXs3 SoC
-- interrupts : IRQ for the temperature alarm
-- #thermal-sensor-cells : Should be 0. See ./thermal.txt for details.
-
-Optional properties:
-- socionext,tmod-calibration: A pair of calibrated values referred from PVT,
- in case that the values aren't set on SoC,
- like a reference board.
-
-Example:
-
- sysctrl@61840000 {
- compatible = "socionext,uniphier-ld20-sysctrl",
- "simple-mfd", "syscon";
- reg = <0x61840000 0x10000>;
- ...
- pvtctl: pvtctl {
- compatible = "socionext,uniphier-ld20-thermal";
- interrupts = <0 3 1>;
- #thermal-sensor-cells = <0>;
- };
- ...
- };
-
- thermal-zones {
- cpu_thermal {
- polling-delay-passive = <250>; /* 250ms */
- polling-delay = <1000>; /* 1000ms */
- thermal-sensors = <&pvtctl>;
-
- trips {
- cpu_crit: cpu_crit {
- temperature = <110000>; /* 110C */
- hysteresis = <2000>;
- type = "critical";
- };
- cpu_alert: cpu_alert {
- temperature = <100000>; /* 100C */
- hysteresis = <2000>;
- type = "passive";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device = <&cpu0 (-1) (-1)>;
- };
- map1 {
- trip = <&cpu_alert>;
- cooling-device = <&cpu2 (-1) (-1)>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
index fa255672e8e5..2c75105c1398 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -28,10 +28,10 @@ properties:
- arm,armv7-timer
- items:
- enum:
- - arm,armv7-timer
+ - arm,armv7-timer
- items:
- enum:
- - arm,armv8-timer
+ - arm,armv8-timer
interrupts:
items:
@@ -51,6 +51,12 @@ properties:
description: If present, the timer is powered through an always-on power
domain, therefore it never loses context.
+ allwinner,erratum-unknown1:
+ type: boolean
+ description: Indicates the presence of an erratum found in Allwinner SoCs,
+ where reading certain values from the counter is unreliable. This also
+ affects writes to the tval register, due to the implicit counter read.
+
fsl,erratum-a008585:
type: boolean
description: Indicates the presence of QorIQ erratum A-008585, which says
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index 582bbef62b95..d83a1f97f911 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -20,7 +20,7 @@ properties:
compatible:
items:
- enum:
- - arm,armv7-timer-mem
+ - arm,armv7-timer-mem
reg:
maxItems: 1
@@ -65,10 +65,9 @@ patternProperties:
description: A timer node has up to 8 frame sub-nodes, each with the following properties.
properties:
frame-number:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 7
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 7
interrupts:
minItems: 1
@@ -77,7 +76,7 @@ patternProperties:
- description: physical timer irq
- description: virtual timer irq
- reg :
+ reg:
minItems: 1
maxItems: 2
items:
diff --git a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
deleted file mode 100644
index eeee6cd51e5c..000000000000
--- a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Cadence TTC - Triple Timer Counter
-
-Required properties:
-- compatible : Should be "cdns,ttc".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 3 interrupts; one per timer channel.
-- clocks: phandle to the source clock
-
-Optional properties:
-- timer-width: Bit width of the timer, necessary if not 16.
-
-Example:
-
-ttc0: ttc0@f8001000 {
- interrupt-parent = <&intc>;
- interrupts = < 0 10 4 0 11 4 0 12 4 >;
- compatible = "cdns,ttc";
- reg = <0xF8001000 0x1000>;
- clocks = <&cpu_clk 3>;
- timer-width = <32>;
-};
diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
new file mode 100644
index 000000000000..c532b60b9c63
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/cdns,ttc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence TTC - Triple Timer Counter
+
+maintainers:
+ - Michal Simek <michal.simek@xilinx.com>
+
+properties:
+ compatible:
+ const: cdns,ttc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 3
+ maxItems: 3
+ description: |
+ A list of 3 interrupts; one per timer channel.
+
+ clocks:
+ maxItems: 1
+
+ timer-width:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: |
+ Bit width of the timer, necessary if not 16.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ ttc0: ttc0@f8001000 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+ compatible = "cdns,ttc";
+ reg = <0xF8001000 0x1000>;
+ clocks = <&cpu_clk 3>;
+ timer-width = <32>;
+ };
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
deleted file mode 100644
index 5d8fd5b52598..000000000000
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Freescale i.MX General Purpose Timer (GPT)
-
-Required properties:
-
-- compatible : should be one of following:
- for i.MX1:
- - "fsl,imx1-gpt";
- for i.MX21:
- - "fsl,imx21-gpt";
- for i.MX27:
- - "fsl,imx27-gpt", "fsl,imx21-gpt";
- for i.MX31:
- - "fsl,imx31-gpt";
- for i.MX25:
- - "fsl,imx25-gpt", "fsl,imx31-gpt";
- for i.MX50:
- - "fsl,imx50-gpt", "fsl,imx31-gpt";
- for i.MX51:
- - "fsl,imx51-gpt", "fsl,imx31-gpt";
- for i.MX53:
- - "fsl,imx53-gpt", "fsl,imx31-gpt";
- for i.MX6Q:
- - "fsl,imx6q-gpt", "fsl,imx31-gpt";
- for i.MX6DL:
- - "fsl,imx6dl-gpt";
- for i.MX6SL:
- - "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
- for i.MX6SX:
- - "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
-- reg : specifies base physical address and size of the registers.
-- interrupts : should be the gpt interrupt.
-- clocks : the clocks provided by the SoC to drive the timer, must contain
- an entry for each entry in clock-names.
-- clock-names : must include "ipg" entry first, then "per" entry.
-
-Example:
-
-gpt1: timer@10003000 {
- compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
- reg = <0x10003000 0x1000>;
- interrupts = <26>;
- clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
- <&clks IMX27_CLK_PER1_GATE>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
new file mode 100644
index 000000000000..883f7f46650b
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/fsl,imxgpt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Purpose Timer (GPT)
+
+maintainers:
+ - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx1-gpt
+ - const: fsl,imx21-gpt
+ - items:
+ - const: fsl,imx27-gpt
+ - const: fsl,imx21-gpt
+ - const: fsl,imx31-gpt
+ - items:
+ - enum:
+ - fsl,imx25-gpt
+ - fsl,imx50-gpt
+ - fsl,imx51-gpt
+ - fsl,imx53-gpt
+ - fsl,imx6q-gpt
+ - const: fsl,imx31-gpt
+ - const: fsl,imx6dl-gpt
+ - items:
+ - enum:
+ - fsl,imx6sl-gpt
+ - fsl,imx6sx-gpt
+ - const: fsl,imx6dl-gpt
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SoC GPT ipg clock
+ - description: SoC GPT per clock
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx27-clock.h>
+
+ timer@10003000 {
+ compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+ reg = <0x10003000 0x1000>;
+ interrupts = <26>;
+ clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
deleted file mode 100644
index 91f704951845..000000000000
--- a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
-==========================================================
-
-For a description of the TCU hardware and drivers, have a look at
-Documentation/mips/ingenic-tcu.rst.
-
-Required properties:
-
-- compatible: Must be one of:
- * ingenic,jz4740-tcu
- * ingenic,jz4725b-tcu
- * ingenic,jz4770-tcu
- * ingenic,x1000-tcu
- followed by "simple-mfd".
-- reg: Should be the offset/length value corresponding to the TCU registers
-- clocks: List of phandle & clock specifiers for clocks external to the TCU.
- The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock
- should be provided if the SoC has it.
-- clock-names: List of name strings for the external clocks.
-- #clock-cells: Should be <1>;
- Clock consumers specify this argument to identify a clock. The valid values
- may be found in <dt-bindings/clock/ingenic,tcu.h>.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value should be 1.
-- interrupts : Specifies the interrupt the controller is connected to.
-
-Optional properties:
-
-- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use.
- Default value is 0xfc.
-
-
-Children nodes
-==========================================================
-
-
-PWM node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
- * ingenic,jz4740-pwm
- * ingenic,jz4725b-pwm
-- #pwm-cells: Should be 3. See ../pwm/pwm.yaml for a description of the cell
- format.
-- clocks: List of phandle & clock specifiers for the TCU clocks.
-- clock-names: List of name strings for the TCU clocks.
-
-
-Watchdog node:
---------------
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-watchdog"
-- clocks: phandle to the WDT clock
-- clock-names: should be "wdt"
-
-
-OS Timer node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
- * ingenic,jz4725b-ost
- * ingenic,jz4770-ost
-- clocks: phandle to the OST clock
-- clock-names: should be "ost"
-- interrupts : Specifies the interrupt the OST is connected to.
-
-
-Example
-==========================================================
-
-#include <dt-bindings/clock/jz4770-cgu.h>
-#include <dt-bindings/clock/ingenic,tcu.h>
-
-/ {
- tcu: timer@10002000 {
- compatible = "ingenic,jz4770-tcu", "simple-mfd";
- reg = <0x10002000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x10002000 0x1000>;
-
- #clock-cells = <1>;
-
- clocks = <&cgu JZ4770_CLK_RTC
- &cgu JZ4770_CLK_EXT
- &cgu JZ4770_CLK_PCLK>;
- clock-names = "rtc", "ext", "pclk";
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&intc>;
- interrupts = <27 26 25>;
-
- watchdog: watchdog@0 {
- compatible = "ingenic,jz4740-watchdog";
- reg = <0x0 0xc>;
-
- clocks = <&tcu TCU_CLK_WDT>;
- clock-names = "wdt";
- };
-
- pwm: pwm@40 {
- compatible = "ingenic,jz4740-pwm";
- reg = <0x40 0x80>;
-
- #pwm-cells = <3>;
-
- clocks = <&tcu TCU_CLK_TIMER0
- &tcu TCU_CLK_TIMER1
- &tcu TCU_CLK_TIMER2
- &tcu TCU_CLK_TIMER3
- &tcu TCU_CLK_TIMER4
- &tcu TCU_CLK_TIMER5
- &tcu TCU_CLK_TIMER6
- &tcu TCU_CLK_TIMER7>;
- clock-names = "timer0", "timer1", "timer2", "timer3",
- "timer4", "timer5", "timer6", "timer7";
- };
-
- ost: timer@e0 {
- compatible = "ingenic,jz4770-ost";
- reg = <0xe0 0x20>;
-
- clocks = <&tcu TCU_CLK_OST>;
- clock-names = "ost";
-
- interrupts = <15>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
new file mode 100644
index 000000000000..03893e6a2f57
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ingenic,tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Timer/Counter Unit (TCU) devicetree bindings
+
+description: |
+ For a description of the TCU hardware and drivers, have a look at
+ Documentation/mips/ingenic-tcu.rst.
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ingenic,jz4740-tcu
+ - ingenic,jz4725b-tcu
+ - ingenic,jz4770-tcu
+ - ingenic,jz4780-tcu
+ - ingenic,x1000-tcu
+ required:
+ - compatible
+
+properties:
+ $nodename:
+ pattern: "^timer@[0-9a-f]+$"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ "#clock-cells":
+ const: 1
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-controller: true
+
+ ranges: true
+
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ingenic,jz4740-tcu
+ - ingenic,jz4725b-tcu
+ - ingenic,jz4770-tcu
+ - ingenic,x1000-tcu
+ - const: simple-mfd
+ - items:
+ - const: ingenic,jz4780-tcu
+ - const: ingenic,jz4770-tcu
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: RTC clock
+ - description: EXT clock
+ - description: PCLK clock
+ - description: TCU clock
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: rtc
+ - const: ext
+ - const: pclk
+ - const: tcu
+ minItems: 3
+
+ interrupts:
+ items:
+ - description: TCU0 interrupt
+ - description: TCU1 interrupt
+ - description: TCU2 interrupt
+ minItems: 1
+
+ assigned-clocks:
+ minItems: 1
+ maxItems: 8
+
+ assigned-clock-parents:
+ minItems: 1
+ maxItems: 8
+
+ assigned-clock-rates:
+ minItems: 1
+ maxItems: 8
+
+ ingenic,pwm-channels-mask:
+ description: Bitmask of TCU channels reserved for PWM use.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x00
+ maximum: 0xff
+ default: 0xfc
+
+patternProperties:
+ "^watchdog@[a-f0-9]+$":
+ type: object
+ $ref: ../watchdog/watchdog.yaml#
+ properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-watchdog
+ - ingenic,jz4780-watchdog
+ - items:
+ - const: ingenic,jz4770-watchdog
+ - const: ingenic,jz4740-watchdog
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: wdt
+
+ required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+ "^pwm@[a-f0-9]+$":
+ type: object
+ $ref: ../pwm/pwm.yaml#
+ properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-pwm
+ - items:
+ - enum:
+ - ingenic,jz4770-pwm
+ - ingenic,jz4780-pwm
+ - const: ingenic,jz4740-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 6
+ maxItems: 8
+
+ clock-names:
+ items:
+ - const: timer0
+ - const: timer1
+ - const: timer2
+ - const: timer3
+ - const: timer4
+ - const: timer5
+ - const: timer6
+ - const: timer7
+ minItems: 6
+
+ required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+ "^timer@[a-f0-9]+$":
+ type: object
+ properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4725b-ost
+ - ingenic,jz4770-ost
+ - items:
+ - const: ingenic,jz4780-ost
+ - const: ingenic,jz4770-ost
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ost
+
+ interrupts:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+ additionalProperties: false
+
+required:
+ - "#clock-cells"
+ - "#interrupt-cells"
+ - interrupt-controller
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4770-cgu.h>
+ #include <dt-bindings/clock/ingenic,tcu.h>
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_EXT>,
+ <&cgu JZ4770_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4770-watchdog", "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>,
+ <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>,
+ <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>,
+ <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>,
+ <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
deleted file mode 100644
index d57659996d62..000000000000
--- a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-NXP System Counter Module(sys_ctr)
-
-The system counter(sys_ctr) is a programmable system counter which provides
-a shared time base to Cortex A15, A7, A53, A73, etc. it is intended for use in
-applications where the counter is always powered and support multiple,
-unrelated clocks. The compare frame inside can be used for timer purpose.
-
-Required properties:
-
-- compatible : should be "nxp,sysctr-timer"
-- reg : Specifies the base physical address and size of the comapre
- frame and the counter control, read & compare.
-- interrupts : should be the first compare frames' interrupt
-- clocks : Specifies the counter clock.
-- clock-names: Specifies the clock's name of this module
-
-Example:
-
- system_counter: timer@306a0000 {
- compatible = "nxp,sysctr-timer";
- reg = <0x306a0000 0x20000>;/* system-counter-rd & compare */
- clocks = <&clk_8m>;
- clock-names = "per";
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- };
diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
new file mode 100644
index 000000000000..830211c55b4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,sysctr-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP System Counter Module(sys_ctr)
+
+maintainers:
+ - Bai Ping <ping.bai@nxp.com>
+
+description: |
+ The system counter(sys_ctr) is a programmable system counter
+ which provides a shared time base to Cortex A15, A7, A53, A73,
+ etc. it is intended for use in applications where the counter
+ is always powered and support multiple, unrelated clocks. The
+ compare frame inside can be used for timer purpose.
+
+properties:
+ compatible:
+ const: nxp,sysctr-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: per
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ timer@306a0000 {
+ compatible = "nxp,sysctr-timer";
+ reg = <0x306a0000 0x20000>;
+ clocks = <&clk_8m>;
+ clock-names = "per";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
deleted file mode 100644
index f82087b220f4..000000000000
--- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NXP Low Power Timer/Pulse Width Modulation Module (TPM)
-
-The Timer/PWM Module (TPM) supports input capture, output compare,
-and the generation of PWM signals to control electric motor and power
-management applications. The counter, compare and capture registers
-are clocked by an asynchronous clock that can remain enabled in low
-power modes. TPM can support global counter bus where one TPM drives
-the counter bus for the others, provided bit width is the same.
-
-Required properties:
-
-- compatible : should be "fsl,imx7ulp-tpm"
-- reg : Specifies base physical address and size of the register sets
- for the clock event device and clock source device.
-- interrupts : Should be the clock event device interrupt.
-- clocks : The clocks provided by the SoC to drive the timer, must contain
- an entry for each entry in clock-names.
-- clock-names : Must include the following entries: "ipg" and "per".
-
-Example:
-tpm5: tpm@40260000 {
- compatible = "fsl,imx7ulp-tpm";
- reg = <0x40260000 0x1000>;
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
- <&clks IMX7ULP_CLK_LPTPM5>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
new file mode 100644
index 000000000000..edd9585f6726
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: |
+ The Timer/PWM Module (TPM) supports input capture, output compare,
+ and the generation of PWM signals to control electric motor and power
+ management applications. The counter, compare and capture registers
+ are clocked by an asynchronous clock that can remain enabled in low
+ power modes. TPM can support global counter bus where one TPM drives
+ the counter bus for the others, provided bit width is the same.
+
+properties:
+ compatible:
+ const: fsl,imx7ulp-tpm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SoC TPM ipg clock
+ - description: SoC TPM per clock
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx7ulp-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ timer@40260000 {
+ compatible = "fsl,imx7ulp-tpm";
+ reg = <0x40260000 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+ <&pcc2 IMX7ULP_CLK_LPTPM5>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
deleted file mode 100644
index a747fabab7d3..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* Renesas R-Car Compare Match Timer (CMT)
-
-The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
-inputs and programmable compare match.
-
-Channels share hardware resources but their counter and compare match value
-are independent. A particular CMT instance can implement only a subset of the
-channels supported by the CMT model. Channel indices represent the hardware
-position of the channel in the CMT and don't match the channel numbers in the
-datasheets.
-
-Required Properties:
-
- - compatible: must contain one or more of the following:
- - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4.
- - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
- - "renesas,r8a7740-cmt0" for the 32-bit CMT0 device included in r8a7740.
- - "renesas,r8a7740-cmt1" for the 48-bit CMT1 device included in r8a7740.
- - "renesas,r8a7740-cmt2" for the 32-bit CMT2 device included in r8a7740.
- - "renesas,r8a7740-cmt3" for the 32-bit CMT3 device included in r8a7740.
- - "renesas,r8a7740-cmt4" for the 32-bit CMT4 device included in r8a7740.
- - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
- - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
- - "renesas,r8a7744-cmt0" for the 32-bit CMT0 device included in r8a7744.
- - "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744.
- - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
- - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
- - "renesas,r8a77470-cmt0" for the 32-bit CMT0 device included in r8a77470.
- - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470.
- - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1.
- - "renesas,r8a774a1-cmt1" for the 48-bit CMT devices included in r8a774a1.
- - "renesas,r8a774b1-cmt0" for the 32-bit CMT0 device included in r8a774b1.
- - "renesas,r8a774b1-cmt1" for the 48-bit CMT devices included in r8a774b1.
- - "renesas,r8a774c0-cmt0" for the 32-bit CMT0 device included in r8a774c0.
- - "renesas,r8a774c0-cmt1" for the 48-bit CMT devices included in r8a774c0.
- - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
- - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
- - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
- - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791.
- - "renesas,r8a7792-cmt0" for the 32-bit CMT0 device included in r8a7792.
- - "renesas,r8a7792-cmt1" for the 48-bit CMT1 device included in r8a7792.
- - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793.
- - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
- - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
- - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
- - "renesas,r8a7795-cmt0" for the 32-bit CMT0 device included in r8a7795.
- - "renesas,r8a7795-cmt1" for the 48-bit CMT devices included in r8a7795.
- - "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796.
- - "renesas,r8a7796-cmt1" for the 48-bit CMT devices included in r8a7796.
- - "renesas,r8a77965-cmt0" for the 32-bit CMT0 device included in r8a77965.
- - "renesas,r8a77965-cmt1" for the 48-bit CMT devices included in r8a77965.
- - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970.
- - "renesas,r8a77970-cmt1" for the 48-bit CMT devices included in r8a77970.
- - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980.
- - "renesas,r8a77980-cmt1" for the 48-bit CMT devices included in r8a77980.
- - "renesas,r8a77990-cmt0" for the 32-bit CMT0 device included in r8a77990.
- - "renesas,r8a77990-cmt1" for the 48-bit CMT devices included in r8a77990.
- - "renesas,r8a77995-cmt0" for the 32-bit CMT0 device included in r8a77995.
- - "renesas,r8a77995-cmt1" for the 48-bit CMT devices included in r8a77995.
- - "renesas,sh73a0-cmt0" for the 32-bit CMT0 device included in sh73a0.
- - "renesas,sh73a0-cmt1" for the 48-bit CMT1 device included in sh73a0.
- - "renesas,sh73a0-cmt2" for the 32-bit CMT2 device included in sh73a0.
- - "renesas,sh73a0-cmt3" for the 32-bit CMT3 device included in sh73a0.
- - "renesas,sh73a0-cmt4" for the 32-bit CMT4 device included in sh73a0.
-
- - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
- and RZ/G1.
- - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2
- and RZ/G1.
- These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
- listed above.
- - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3
- and RZ/G2.
- - "renesas,rcar-gen3-cmt1" for 48-bit CMT devices included in R-Car Gen3
- and RZ/G2.
- These are fallbacks for R-Car Gen3 and RZ/G2 entries listed
- above.
-
- - reg: base address and length of the registers block for the timer module.
- - interrupts: interrupt-specifier for the timer, one per channel.
- - clocks: a list of phandle + clock-specifier pairs, one for each entry
- in clock-names.
- - clock-names: must contain "fck" for the functional clock.
-
-
-Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
-
- cmt0: timer@ffca0000 {
- compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
- reg = <0 0xffca0000 0 0x1004>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
- <0 142 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
- clock-names = "fck";
- };
-
- cmt1: timer@e6130000 {
- compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
- reg = <0 0xe6130000 0 0x1004>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 126 IRQ_TYPE_LEVEL_HIGH>,
- <0 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
- clock-names = "fck";
- };
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
new file mode 100644
index 000000000000..7e4dc5623da8
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,cmt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Compare Match Timer (CMT)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+ The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+ inputs and programmable compare match.
+
+ Channels share hardware resources but their counter and compare match values
+ are independent. A particular CMT instance can implement only a subset of the
+ channels supported by the CMT model. Channel indices represent the hardware
+ position of the channel in the CMT and don't match the channel numbers in the
+ datasheets.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r8a7740-cmt0 # 32-bit CMT0 on R-Mobile A1
+ - renesas,r8a7740-cmt1 # 48-bit CMT1 on R-Mobile A1
+ - renesas,r8a7740-cmt2 # 32-bit CMT2 on R-Mobile A1
+ - renesas,r8a7740-cmt3 # 32-bit CMT3 on R-Mobile A1
+ - renesas,r8a7740-cmt4 # 32-bit CMT4 on R-Mobile A1
+ - renesas,sh73a0-cmt0 # 32-bit CMT0 on SH-Mobile AG5
+ - renesas,sh73a0-cmt1 # 48-bit CMT1 on SH-Mobile AG5
+ - renesas,sh73a0-cmt2 # 32-bit CMT2 on SH-Mobile AG5
+ - renesas,sh73a0-cmt3 # 32-bit CMT3 on SH-Mobile AG5
+ - renesas,sh73a0-cmt4 # 32-bit CMT4 on SH-Mobile AG5
+
+ - items:
+ - enum:
+ - renesas,r8a73a4-cmt0 # 32-bit CMT0 on R-Mobile APE6
+ - renesas,r8a7743-cmt0 # 32-bit CMT0 on RZ/G1M
+ - renesas,r8a7744-cmt0 # 32-bit CMT0 on RZ/G1N
+ - renesas,r8a7745-cmt0 # 32-bit CMT0 on RZ/G1E
+ - renesas,r8a77470-cmt0 # 32-bit CMT0 on RZ/G1C
+ - renesas,r8a7790-cmt0 # 32-bit CMT0 on R-Car H2
+ - renesas,r8a7791-cmt0 # 32-bit CMT0 on R-Car M2-W
+ - renesas,r8a7792-cmt0 # 32-bit CMT0 on R-Car V2H
+ - renesas,r8a7793-cmt0 # 32-bit CMT0 on R-Car M2-N
+ - renesas,r8a7794-cmt0 # 32-bit CMT0 on R-Car E2
+ - const: renesas,rcar-gen2-cmt0 # 32-bit CMT0 on R-Mobile APE6, R-Car Gen2 and RZ/G1
+
+ - items:
+ - enum:
+ - renesas,r8a73a4-cmt1 # 48-bit CMT1 on R-Mobile APE6
+ - renesas,r8a7743-cmt1 # 48-bit CMT1 on RZ/G1M
+ - renesas,r8a7744-cmt1 # 48-bit CMT1 on RZ/G1N
+ - renesas,r8a7745-cmt1 # 48-bit CMT1 on RZ/G1E
+ - renesas,r8a77470-cmt1 # 48-bit CMT1 on RZ/G1C
+ - renesas,r8a7790-cmt1 # 48-bit CMT1 on R-Car H2
+ - renesas,r8a7791-cmt1 # 48-bit CMT1 on R-Car M2-W
+ - renesas,r8a7792-cmt1 # 48-bit CMT1 on R-Car V2H
+ - renesas,r8a7793-cmt1 # 48-bit CMT1 on R-Car M2-N
+ - renesas,r8a7794-cmt1 # 48-bit CMT1 on R-Car E2
+ - const: renesas,rcar-gen2-cmt1 # 48-bit CMT1 on R-Mobile APE6, R-Car Gen2 and RZ/G1
+
+ - items:
+ - enum:
+ - renesas,r8a774a1-cmt0 # 32-bit CMT0 on RZ/G2M
+ - renesas,r8a774b1-cmt0 # 32-bit CMT0 on RZ/G2N
+ - renesas,r8a774c0-cmt0 # 32-bit CMT0 on RZ/G2E
+ - renesas,r8a7795-cmt0 # 32-bit CMT0 on R-Car H3
+ - renesas,r8a7796-cmt0 # 32-bit CMT0 on R-Car M3-W
+ - renesas,r8a77965-cmt0 # 32-bit CMT0 on R-Car M3-N
+ - renesas,r8a77970-cmt0 # 32-bit CMT0 on R-Car V3M
+ - renesas,r8a77980-cmt0 # 32-bit CMT0 on R-Car V3H
+ - renesas,r8a77990-cmt0 # 32-bit CMT0 on R-Car E3
+ - renesas,r8a77995-cmt0 # 32-bit CMT0 on R-Car D3
+ - const: renesas,rcar-gen3-cmt0 # 32-bit CMT0 on R-Car Gen3 and RZ/G2
+
+ - items:
+ - enum:
+ - renesas,r8a774a1-cmt1 # 48-bit CMT on RZ/G2M
+ - renesas,r8a774b1-cmt1 # 48-bit CMT on RZ/G2N
+ - renesas,r8a774c0-cmt1 # 48-bit CMT on RZ/G2E
+ - renesas,r8a7795-cmt1 # 48-bit CMT on R-Car H3
+ - renesas,r8a7796-cmt1 # 48-bit CMT on R-Car M3-W
+ - renesas,r8a77965-cmt1 # 48-bit CMT on R-Car M3-N
+ - renesas,r8a77970-cmt1 # 48-bit CMT on R-Car V3M
+ - renesas,r8a77980-cmt1 # 48-bit CMT on R-Car V3H
+ - renesas,r8a77990-cmt1 # 48-bit CMT on R-Car E3
+ - renesas,r8a77995-cmt1 # 48-bit CMT on R-Car D3
+ - const: renesas,rcar-gen3-cmt1 # 48-bit CMT on R-Car Gen3 and RZ/G2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: fck
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen2-cmt0
+ - renesas,rcar-gen3-cmt0
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen2-cmt1
+ - renesas,rcar-gen3-cmt1
+ then:
+ properties:
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7790-sysc.h>
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
+ reg = <0xffca0000 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
+ reg = <0xe6130000 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 329>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
+ };
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
deleted file mode 100644
index ba0a34d97eb8..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
-
-The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
-clock inputs and programmable compare match.
-
-Channels share hardware resources but their counter and compare match value
-are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
-
-Required Properties:
-
- - compatible: must be one or more of the following:
- - "renesas,mtu2-r7s72100" for the r7s72100 MTU2
- - "renesas,mtu2" for any MTU2
- This is a fallback for the above renesas,mtu2-* entries
-
- - reg: base address and length of the registers block for the timer module.
-
- - interrupts: interrupt specifiers for the timer, one for each entry in
- interrupt-names.
- - interrupt-names: must contain one entry named "tgi?a" for each enabled
- channel, where "?" is the channel index expressed as one digit from "0" to
- "4".
-
- - clocks: a list of phandle + clock-specifier pairs, one for each entry
- in clock-names.
- - clock-names: must contain "fck" for the functional clock.
-
-
-Example: R7S72100 (RZ/A1H) MTU2 node
-
- mtu2: timer@fcff0000 {
- compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
- reg = <0xfcff0000 0x400>;
- interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
- <0 146 IRQ_TYPE_LEVEL_HIGH>,
- <0 150 IRQ_TYPE_LEVEL_HIGH>,
- <0 154 IRQ_TYPE_LEVEL_HIGH>,
- <0 159 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a";
- clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
- clock-names = "fck";
- };
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml
new file mode 100644
index 000000000000..15d8dddf4ae9
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,mtu2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+ The MTU2 is a multi-purpose, multi-channel timer/counter with configurable clock inputs
+ and programmable compare match.
+
+ Channels share hardware resources but their counter and compare match value are
+ independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,mtu2-r7s72100 # RZ/A1H
+ - const: renesas,mtu2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 5
+ description: One entry for each enabled channel.
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: tgi0a
+ - const: tgi1a
+ - const: tgi2a
+ - const: tgi3a
+ - const: tgi4a
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: fck
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r7s72100-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ };
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.txt b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
deleted file mode 100644
index 81a78f8bcf17..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,ostm.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Renesas OS Timer (OSTM)
-
-The OSTM is a multi-channel 32-bit timer/counter with fixed clock
-source that can operate in either interval count down timer or free-running
-compare match mode.
-
-Channels are independent from each other.
-
-Required Properties:
-
- - compatible: must be one or more of the following:
- - "renesas,r7s72100-ostm" for the R7S72100 (RZ/A1) OSTM
- - "renesas,r7s9210-ostm" for the R7S9210 (RZ/A2) OSTM
- - "renesas,ostm" for any OSTM
- This is a fallback for the above renesas,*-ostm entries
-
- - reg: base address and length of the register block for a timer channel.
-
- - interrupts: interrupt specifier for the timer channel.
-
- - clocks: clock specifier for the timer channel.
-
-Example: R7S72100 (RZ/A1H) OSTM node
-
- ostm0: timer@fcfec000 {
- compatible = "renesas,r7s72100-ostm", "renesas,ostm";
- reg = <0xfcfec000 0x30>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
- clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
- power-domains = <&cpg_clocks>;
- };
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
new file mode 100644
index 000000000000..600d47ab7d58
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,ostm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas OS Timer (OSTM)
+
+maintainers:
+ - Chris Brandt <chris.brandt@renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The OSTM is a multi-channel 32-bit timer/counter with fixed clock source that
+ can operate in either interval count down timer or free-running compare match
+ mode.
+
+ Channels are independent from each other.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r7s72100-ostm # RZ/A1H
+ - renesas,r7s9210-ostm # RZ/A2M
+ - const: renesas,ostm # Generic
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r7s72100-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ ostm0: timer@fcfec000 {
+ compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+ reg = <0xfcfec000 0x30>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
+ power-domains = <&cpg_clocks>;
+ };
diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
index c8a2a92074df..4d13e6bc1c50 100644
--- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
@@ -25,6 +25,20 @@ properties:
power-domains:
maxItems: 1
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges: true
+
required:
- compatible
- reg
@@ -39,30 +53,39 @@ patternProperties:
Documentation/devicetree/bindings/ufs/cdns,ufshc.txt for binding
documentation of child node
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- ufs_wrapper: ufs-wrapper@4e80000 {
- compatible = "ti,j721e-ufs";
- reg = <0x0 0x4e80000 0x0 0x100>;
- power-domains = <&k3_pds 277>;
- clocks = <&k3_clks 277 1>;
- assigned-clocks = <&k3_clks 277 1>;
- assigned-clock-parents = <&k3_clks 277 4>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- ufs@4e84000 {
- compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
- reg = <0x0 0x4e84000 0x0 0x10000>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- freq-table-hz = <19200000 19200000>;
- power-domains = <&k3_pds 277>;
- clocks = <&k3_clks 277 1>;
- assigned-clocks = <&k3_clks 277 1>;
- assigned-clock-parents = <&k3_clks 277 4>;
- clock-names = "core_clk";
- };
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ufs-wrapper@4e80000 {
+ compatible = "ti,j721e-ufs";
+ reg = <0x0 0x4e80000 0x0 0x100>;
+ power-domains = <&k3_pds 277>;
+ clocks = <&k3_clks 277 1>;
+ assigned-clocks = <&k3_clks 277 1>;
+ assigned-clock-parents = <&k3_clks 277 4>;
+
+ ranges = <0x0 0x0 0x0 0x4e80000 0x0 0x14000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ufs@4000 {
+ compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+ reg = <0x0 0x4000 0x0 0x10000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ freq-table-hz = <19200000 19200000>;
+ power-domains = <&k3_pds 277>;
+ clocks = <&k3_clks 277 1>;
+ assigned-clocks = <&k3_clks 277 1>;
+ assigned-clock-parents = <&k3_clks 277 4>;
+ clock-names = "core_clk";
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index b0e5e0fe9386..f6d48f4a0116 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -111,7 +111,7 @@ examples:
- |
usb: usb@ffe09000 {
compatible = "amlogic,meson-g12a-usb-ctrl";
- reg = <0x0 0xffe09000 0x0 0xa0>;
+ reg = <0xffe09000 0xa0>;
interrupts = <16>;
#address-cells = <1>;
#size-cells = <1>;
@@ -147,4 +147,3 @@ examples:
snps,quirk-frame-length-adjustment;
};
};
-
diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
index 06399ba0d9e4..297fb77a5454 100644
--- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
+++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
@@ -38,19 +38,17 @@ properties:
aspeed,vhub-downstream-ports:
description: Number of downstream ports supported by the Virtual Hub
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 5
- minimum: 1
- maximum: 7
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 5
+ minimum: 1
+ maximum: 7
aspeed,vhub-generic-endpoints:
description: Number of generic endpoints supported by the Virtual Hub
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 15
- minimum: 1
- maximum: 21
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 15
+ minimum: 1
+ maximum: 21
required:
- compatible
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 0d6d850a7f17..9352a8ef60a6 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -62,14 +62,14 @@ properties:
resets:
items:
- - description: common reset
- - description: ecc reset
+ - description: common reset
+ - description: ecc reset
minItems: 1
reset-names:
items:
- - const: dwc2
- - const: dwc2-ecc
+ - const: dwc2
+ - const: dwc2-ecc
minItems: 1
phys:
@@ -78,6 +78,9 @@ properties:
phy-names:
const: usb2-phy
+ power-domains:
+ maxItems: 1
+
vbus-supply:
description: reference to the VBUS regulator. Depending on the current mode
this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt
deleted file mode 100644
index 335589895763..000000000000
--- a/Documentation/devicetree/bindings/usb/ehci-mv.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Marvell PXA/MMP EHCI controller.
-
-Required properties:
-
-- compatible: must be "marvell,pxau2o-ehci"
-- reg: physical base addresses of the controller and length of memory mapped region
-- interrupts: one EHCI controller interrupt should be described here
-- clocks: phandle list of usb clocks
-- clock-names: should be "USBCLK"
-- phys: phandle for the PHY device
-- phy-names: should be "usb"
-
-Example:
-
- ehci0: usb-ehci@d4208000 {
- compatible = "marvell,pxau2o-ehci";
- reg = <0xd4208000 0x200>;
- interrupts = <44>;
- clocks = <&soc_clocks MMP2_CLK_USB>;
- clock-names = "USBCLK";
- phys = <&usb_otg_phy>;
- phy-names = "usb";
- };
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 10edd05872ea..69f3f26d1207 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -6,19 +6,30 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: USB EHCI Controller Device Tree Bindings
-allOf:
- - $ref: "usb-hcd.yaml"
-
maintainers:
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+allOf:
+ - $ref: "usb-hcd.yaml"
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ const: ibm,usb-ehci-440epx
+ then:
+ properties:
+ reg:
+ maxItems: 1
+
properties:
compatible:
contains:
const: generic-ehci
reg:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
interrupts:
maxItems: 1
@@ -36,6 +47,9 @@ properties:
- if a USB DRD channel: first clock should be host and second
one should be peripheral
+ power-domains:
+ maxItems: 1
+
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
description:
@@ -74,6 +88,9 @@ properties:
phy-names:
const: usb
+ iommus:
+ maxItems: 1
+
required:
- compatible
- reg
@@ -87,7 +104,7 @@ examples:
compatible = "ibm,usb-ehci-440epx", "generic-ehci";
interrupt-parent = <&UIC0>;
interrupts = <0x1a 4>;
- reg = <0 0xe0000300 90 0 0xe0000390 70>;
+ reg = <0xe0000300 90>, <0xe0000390 70>;
big-endian;
};
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index bcffec1f1341..2178bcc401bc 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -36,6 +36,9 @@ properties:
- if a USB DRD channel: first clock should be host and second
one should be peripheral
+ power-domains:
+ maxItems: 1
+
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
description:
@@ -73,6 +76,9 @@ properties:
phy-names:
const: usb
+ iommus:
+ maxItems: 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
index c2d2ee43ba67..c334aea6b59d 100644
--- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
+++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
@@ -42,6 +42,9 @@ properties:
phys:
description: PHY specifier for the USB PHY
+ usb-role-switch:
+ type: boolean
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
new file mode 100644
index 000000000000..3cf93dd45eb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA/MMP EHCI bindings
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+allOf:
+ - $ref: usb-hcd.yaml#
+
+properties:
+ compatible:
+ const: marvell,pxau2o-ehci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: USBCLK
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: usb
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/marvell,mmp2.h>
+ usb@d4208000 {
+ compatible = "marvell,pxau2o-ehci";
+ reg = <0xd4208000 0x200>;
+ interrupts = <44>;
+ clocks = <&soc_clocks MMP2_CLK_USB>;
+ clock-names = "USBCLK";
+ phys = <&usb_otg_phy>;
+ phy-names = "usb";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
index b84ed8ee8cfc..d814d2db19ee 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -163,9 +163,9 @@ examples:
usb@700d0000 {
compatible = "nvidia,tegra210-xudc";
- reg = <0x0 0x700d0000 0x0 0x8000>,
- <0x0 0x700d8000 0x0 0x1000>,
- <0x0 0x700d9000 0x0 0x1000>;
+ reg = <0x700d0000 0x8000>,
+ <0x700d8000 0x1000>,
+ <0x700d9000 0x1000>;
reg-names = "base", "fpci", "ipfs";
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
deleted file mode 100644
index fbdd01756752..000000000000
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-Qualcomm SuperSpeed DWC3 USB SoC controller
-
-Required properties:
-- compatible: Compatible list, contains
- "qcom,dwc3"
- "qcom,msm8996-dwc3" for msm8996 SOC.
- "qcom,msm8998-dwc3" for msm8998 SOC.
- "qcom,sdm845-dwc3" for sdm845 SOC.
-- reg: Offset and length of register set for QSCRATCH wrapper
-- power-domains: specifies a phandle to PM domain provider node
-- clocks: A list of phandle + clock-specifier pairs for the
- clocks listed in clock-names
-- clock-names: Should contain the following:
- "core" Master/Core clock, have to be >= 125 MHz for SS
- operation and >= 60MHz for HS operation
- "mock_utmi" Mock utmi clock needed for ITP/SOF generation in
- host mode. Its frequency should be 19.2MHz.
- "sleep" Sleep clock, used for wakeup when USB3 core goes
- into low power mode (U3).
-
-Optional clocks:
- "iface" System bus AXI clock.
- Not present on "qcom,msm8996-dwc3" compatible.
- "cfg_noc" System Config NOC clock.
- Not present on "qcom,msm8996-dwc3" compatible.
-- assigned-clocks: Should be:
- MOCK_UTMI_CLK
- MASTER_CLK
-- assigned-clock-rates: Should be:
- 19.2Mhz (192000000) for MOCK_UTMI_CLK
- >=125Mhz (125000000) for MASTER_CLK in SS mode
- >=60Mhz (60000000) for MASTER_CLK in HS mode
-
-Optional properties:
-- resets: Phandle to reset control that resets core and wrapper.
-- interrupts: specifies interrupts from controller wrapper used
- to wakeup from low power/susepnd state. Must contain
- one or more entry for interrupt-names property
-- interrupt-names: Must include the following entries:
- - "hs_phy_irq": The interrupt that is asserted when a
- wakeup event is received on USB2 bus
- - "ss_phy_irq": The interrupt that is asserted when a
- wakeup event is received on USB3 bus
- - "dm_hs_phy_irq" and "dp_hs_phy_irq": Separate
- interrupts for any wakeup event on DM and DP lines
-- qcom,select-utmi-as-pipe-clk: if present, disable USB3 pipe_clk requirement.
- Used when dwc3 operates without SSPHY and only
- HS/FS/LS modes are supported.
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
-Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
-
-Example device nodes:
-
- hs_phy: phy@100f8800 {
- compatible = "qcom,qusb2-v2-phy";
- ...
- };
-
- ss_phy: phy@100f8830 {
- compatible = "qcom,qmp-v3-usb3-phy";
- ...
- };
-
- usb3_0: usb30@a6f8800 {
- compatible = "qcom,dwc3";
- reg = <0xa6f8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
-
- clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
- <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
- clock-names = "core", "mock_utmi", "sleep";
-
- assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <133000000>;
-
- resets = <&gcc GCC_USB30_PRIM_BCR>;
- reset-names = "core_reset";
- power-domains = <&gcc USB30_PRIM_GDSC>;
- qcom,select-utmi-as-pipe-clk;
-
- dwc3@10000000 {
- compatible = "snps,dwc3";
- reg = <0x10000000 0xcd00>;
- interrupts = <0 205 0x4>;
- phys = <&hs_phy>, <&ss_phy>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
- };
- };
-
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
new file mode 100644
index 000000000000..dac10848dd7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+ - Manu Gautam <mgautam@codeaurora.org>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,msm8996-dwc3
+ - qcom,msm8998-dwc3
+ - qcom,sc7180-dwc3
+ - qcom,sdm845-dwc3
+ - const: qcom,dwc3
+
+ reg:
+ description: Offset and length of register set for QSCRATCH wrapper
+ maxItems: 1
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ power-domains:
+ description: specifies a phandle to PM domain provider node
+ maxItems: 1
+
+ clocks:
+ description:
+ A list of phandle and clock-specifier pairs for the clocks
+ listed in clock-names.
+ items:
+ - description: System Config NOC clock.
+ - description: Master/Core clock, has to be >= 125 MHz
+ for SS operation and >= 60MHz for HS operation.
+ - description: System bus AXI clock.
+ - description: Mock utmi clock needed for ITP/SOF generation
+ in host mode. Its frequency should be 19.2MHz.
+ - description: Sleep clock, used for wakeup when
+ USB3 core goes into low power mode (U3).
+
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: mock_utmi
+ - const: sleep
+
+ assigned-clocks:
+ items:
+ - description: Phandle and clock specifier of MOCK_UTMI_CLK.
+ - description: Phandle and clock specifoer of MASTER_CLK.
+
+ assigned-clock-rates:
+ items:
+ - description: Must be 19.2MHz (19200000).
+ - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode.
+ resets:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: usb-ddr
+ - const: apps-usb
+
+ interrupts:
+ items:
+ - description: The interrupt that is asserted
+ when a wakeup event is received on USB2 bus.
+ - description: The interrupt that is asserted
+ when a wakeup event is received on USB3 bus.
+ - description: Wakeup event on DM line.
+ - description: Wakeup event on DP line.
+
+ interrupt-names:
+ items:
+ - const: hs_phy_irq
+ - const: ss_phy_irq
+ - const: dm_hs_phy_irq
+ - const: dp_hs_phy_irq
+
+ qcom,select-utmi-as-pipe-clk:
+ description:
+ If present, disable USB3 pipe_clk requirement.
+ Used when dwc3 operates without SSPHY and only
+ HS/FS/LS modes are supported.
+ type: boolean
+
+# Required child node:
+
+patternProperties:
+ "^dwc3@[0-9a-f]+$":
+ type: object
+ description:
+ A child node must exist to represent the core DWC3 IP block
+ The content of the node is defined in dwc3.txt.
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - power-domains
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb@a6f8800 {
+ compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <150000000>;
+
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x740 0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
index 031452aa25bc..e3cdeab1199f 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
@@ -73,7 +73,7 @@ examples:
usb3_peri0: usb@ee020000 {
compatible = "renesas,r8a774c0-usb3-peri", "renesas,rcar-gen3-usb3-peri";
- reg = <0 0xee020000 0 0x400>;
+ reg = <0xee020000 0x400>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
companion = <&xhci0>;
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index a7ae95598ccb..af4826fb6824 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -22,6 +22,7 @@ properties:
- items:
- enum:
+ - renesas,usbhs-r8a7742 # RZ/G1H
- renesas,usbhs-r8a7743 # RZ/G1M
- renesas,usbhs-r8a7744 # RZ/G1N
- renesas,usbhs-r8a7745 # RZ/G1E
@@ -121,7 +122,7 @@ examples:
usbhs: usb@e6590000 {
compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
- reg = <0 0xe6590000 0 0x100>;
+ reg = <0xe6590000 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>;
};
diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
index 5f5264b2e9ad..90750255792f 100644
--- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
@@ -57,30 +57,36 @@ examples:
- |
#include <dt-bindings/soc/ti,sci_pm_domain.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- cdns_usb@4104000 {
- compatible = "ti,j721e-usb";
- reg = <0x00 0x4104000 0x00 0x100>;
- power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
- clock-names = "ref", "lpm";
- assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */
- assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
- #address-cells = <2>;
- #size-cells = <2>;
- usb@6000000 {
- compatible = "cdns,usb3";
- reg = <0x00 0x6000000 0x00 0x10000>,
- <0x00 0x6010000 0x00 0x10000>,
- <0x00 0x6020000 0x00 0x10000>;
- reg-names = "otg", "xhci", "dev";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
- interrupt-names = "host",
- "peripheral",
- "otg";
- maximum-speed = "super-speed";
- dr_mode = "otg";
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cdns_usb@4104000 {
+ compatible = "ti,j721e-usb";
+ reg = <0x00 0x4104000 0x00 0x100>;
+ power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
+ clock-names = "ref", "lpm";
+ assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */
+ assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb@6000000 {
+ compatible = "cdns,usb3";
+ reg = <0x00 0x6000000 0x00 0x10000>,
+ <0x00 0x6010000 0x00 0x10000>,
+ <0x00 0x6020000 0x00 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
+ interrupt-names = "host",
+ "peripheral",
+ "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
};
};
diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
deleted file mode 100644
index ec80641208a5..000000000000
--- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-USB GPIO Based Connection Detection
-
-This is typically used to switch dual role mode from the USB ID pin connected
-to an input GPIO, and also used to enable/disable device mode from the USB
-Vbus pin connected to an input GPIO.
-
-Required properties:
-- compatible : should include "gpio-usb-b-connector" and "usb-b-connector".
-- id-gpios, vbus-gpios : input gpios, either one of them must be present,
- and both can be present as well.
- see connector/usb-connector.yaml
-
-Optional properties:
-- vbus-supply : can be present if needed when supports dual role mode.
- see connector/usb-connector.yaml
-
-- Sub-nodes:
- - port : can be present.
- see graph.txt
-
-Example:
-
-&mtu3 {
- connector {
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- type = "micro";
- id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
- vbus-supply = <&usb_p0_vbus>;
- };
-};
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index dc025f126d71..4473c9898d31 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -7,6 +7,7 @@ Required properties:
- "marvell,armada3700-xhci" for Armada 37xx SoCs
- "marvell,armada-375-xhci" for Armada 375 SoCs
- "marvell,armada-380-xhci" for Armada 38x SoCs
+ - "renesas,xhci-r8a7742" for r8a7742 SoC
- "renesas,xhci-r8a7743" for r8a7743 SoC
- "renesas,xhci-r8a7744" for r8a7744 SoC
- "renesas,xhci-r8a774a1" for r8a774a1 SoC
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 72f6df3c8b3c..ef6d75b9113a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -59,6 +59,8 @@ patternProperties:
description: Allwinner Technology Co., Ltd.
"^alphascale,.*":
description: AlphaScale Integrated Circuits Systems, Inc.
+ "^alps,.*":
+ description: Alps Electric Co., Ltd.
"^altr,.*":
description: Altera Corp.
"^amarula,.*":
@@ -131,6 +133,8 @@ patternProperties:
description: Shanghai AVIC Optoelectronics Co., Ltd.
"^avnet,.*":
description: Avnet, Inc.
+ "^awinic,.*":
+ description: Shanghai Awinic Technology Co., Ltd.
"^axentia,.*":
description: Axentia Technologies AB
"^axis,.*":
@@ -139,10 +143,14 @@ patternProperties:
description: Azoteq (Pty) Ltd
"^azw,.*":
description: Shenzhen AZW Technology Co., Ltd.
+ "^baikal,.*":
+ description: BAIKAL ELECTRONICS, JSC
"^bananapi,.*":
description: BIPAI KEJI LIMITED
"^beacon,.*":
description: Compass Electronics Group, LLC
+ "^beagle,.*":
+ description: BeagleBoard.org Foundation
"^bhf,.*":
description: Beckhoff Automation GmbH & Co. KG
"^bitmain,.*":
@@ -181,6 +189,8 @@ patternProperties:
description: CDTech(H.K.) Electronics Limited
"^ceva,.*":
description: Ceva, Inc.
+ "^checkpoint,.*":
+ description: Check Point Software Technologies Ltd.
"^chipidea,.*":
description: Chipidea, Inc
"^chipone,.*":
@@ -816,6 +826,8 @@ patternProperties:
description: Primux Trading, S.L.
"^probox2,.*":
description: PROBOX2 (by W2COMP Co., Ltd.)
+ "^prt,.*":
+ description: Protonic Holland
"^pulsedlight,.*":
description: PulsedLight, Inc
"^purism,.*":
@@ -928,6 +940,8 @@ patternProperties:
description: Silead Inc.
"^silergy,.*":
description: Silergy Corp.
+ "^silex-insight,.*":
+ description: Silex Insight
"^siliconmitus,.*":
description: Silicon Mitus, Inc.
"^simtek,.*":
@@ -1059,6 +1073,8 @@ patternProperties:
description: Tyan Computer Corporation
"^u-blox,.*":
description: u-blox
+ "^u-boot,.*":
+ description: U-Boot bootloader
"^ucrobotics,.*":
description: uCRobotics
"^ubnt,.*":
@@ -1079,6 +1095,8 @@ patternProperties:
description: Aigo Digital Technology Co., Ltd.
"^v3,.*":
description: V3 Semiconductor
+ "^vaisala,.*":
+ description: Vaisala
"^vamrs,.*":
description: Vamrs Ltd.
"^variscite,.*":
@@ -1107,6 +1125,8 @@ patternProperties:
description: Waveshare Electronics
"^wd,.*":
description: Western Digital Corp.
+ "^we,.*":
+ description: Würth Elektronik GmbH.
"^wetek,.*":
description: WeTek Electronics, limited.
"^wexler,.*":
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
deleted file mode 100644
index adc6b76fcb3a..000000000000
--- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Freescale i.MX Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-wdt"
-- reg : Should contain WDT registers location and length
-- interrupts : Should contain WDT interrupt
-
-Optional properties:
-- big-endian: If present the watchdog device's registers are implemented
- in big endian mode, otherwise in native mode(same with CPU), for more
- detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
-- fsl,ext-reset-output: If present the watchdog device is configured to
- assert its external reset (WDOG_B) instead of issuing a software reset.
-- timeout-sec : Contains the watchdog timeout in seconds
-
-Examples:
-
-wdt@73f98000 {
- compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
- reg = <0x73f98000 0x4000>;
- interrupts = <58>;
- big-endian;
- timeout-sec = <20>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
new file mode 100644
index 000000000000..d96b93b11fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl-imx-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Watchdog Timer (WDT) Controller
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+ - $ref: "watchdog.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx21-wdt
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ fsl,ext-reset-output:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ If present, the watchdog device is configured to assert its
+ external reset (WDOG_B) instead of issuing a software reset.
+
+required:
+ - compatible
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+
+ watchdog@20bc000 {
+ compatible = "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
deleted file mode 100644
index f902508d6cac..000000000000
--- a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Freescale i.MX7ULP Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible : Should be "fsl,imx7ulp-wdt"
-- reg : Should contain WDT registers location and length
-- interrupts : Should contain WDT interrupt
-- clocks: Should contain a phandle pointing to the gated peripheral clock.
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds
-
-Examples:
-
-wdog1: watchdog@403d0000 {
- compatible = "fsl,imx7ulp-wdt";
- reg = <0x403d0000 0x10000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
- assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
- assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
- timeout-sec = <40>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml
new file mode 100644
index 000000000000..51d6d482bbc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl-imx7ulp-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP Watchdog Timer (WDT) Controller
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+ - $ref: "watchdog.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx7ulp-wdt
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clocks-parents:
+ maxItems: 1
+
+ timeout-sec: true
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx7ulp-clock.h>
+
+ watchdog@403d0000 {
+ compatible = "fsl,imx7ulp-wdt";
+ reg = <0x403d0000 0x10000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+ assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+ assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+ timeout-sec = <40>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt
deleted file mode 100644
index e42fd3019cb7..000000000000
--- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Renesas Watchdog Timer (WDT) Controller
-
-Required properties:
- - compatible : Must be "renesas,<soctype>-wdt", followed by a generic
- fallback compatible string when compatible with the generic
- version.
- Examples with soctypes are:
- - "renesas,r8a7742-wdt" (RZ/G1H)
- - "renesas,r8a7743-wdt" (RZ/G1M)
- - "renesas,r8a7744-wdt" (RZ/G1N)
- - "renesas,r8a7745-wdt" (RZ/G1E)
- - "renesas,r8a77470-wdt" (RZ/G1C)
- - "renesas,r8a774a1-wdt" (RZ/G2M)
- - "renesas,r8a774b1-wdt" (RZ/G2N)
- - "renesas,r8a774c0-wdt" (RZ/G2E)
- - "renesas,r8a7790-wdt" (R-Car H2)
- - "renesas,r8a7791-wdt" (R-Car M2-W)
- - "renesas,r8a7792-wdt" (R-Car V2H)
- - "renesas,r8a7793-wdt" (R-Car M2-N)
- - "renesas,r8a7794-wdt" (R-Car E2)
- - "renesas,r8a7795-wdt" (R-Car H3)
- - "renesas,r8a7796-wdt" (R-Car M3-W)
- - "renesas,r8a77961-wdt" (R-Car M3-W+)
- - "renesas,r8a77965-wdt" (R-Car M3-N)
- - "renesas,r8a77970-wdt" (R-Car V3M)
- - "renesas,r8a77990-wdt" (R-Car E3)
- - "renesas,r8a77995-wdt" (R-Car D3)
- - "renesas,r7s72100-wdt" (RZ/A1)
- - "renesas,r7s9210-wdt" (RZ/A2)
- The generic compatible string must be:
- - "renesas,rza-wdt" for RZ/A
- - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1
- - "renesas,rcar-gen3-wdt" for R-Car Gen3 and RZ/G2
-
-- reg : Should contain WDT registers location and length
-- clocks : the clock feeding the watchdog timer.
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds
-- power-domains : the power domain the WDT belongs to
-- interrupts: Some WDTs have an interrupt when used in interval timer mode
-
-Examples:
-
- wdt0: watchdog@e6020000 {
- compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
- reg = <0 0xe6020000 0 0x0c>;
- clocks = <&cpg CPG_MOD 402>;
- power-domains = <&cpg>;
- timeout-sec = <60>;
- };
diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
new file mode 100644
index 000000000000..572f4c912fef
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/renesas,wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Watchdog Timer (WDT) Controller
+
+maintainers:
+ - Wolfram Sang <wsa+renesas@sang-engineering.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+ - $ref: "watchdog.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r7s72100-wdt # RZ/A1
+ - renesas,r7s9210-wdt # RZ/A2
+ - const: renesas,rza-wdt # RZ/A
+
+ - items:
+ - enum:
+ - renesas,r8a7742-wdt # RZ/G1H
+ - renesas,r8a7743-wdt # RZ/G1M
+ - renesas,r8a7744-wdt # RZ/G1N
+ - renesas,r8a7745-wdt # RZ/G1E
+ - renesas,r8a77470-wdt # RZ/G1C
+ - renesas,r8a7790-wdt # R-Car H2
+ - renesas,r8a7791-wdt # R-Car M2-W
+ - renesas,r8a7792-wdt # R-Car V2H
+ - renesas,r8a7793-wdt # R-Car M2-N
+ - renesas,r8a7794-wdt # R-Car E2
+ - const: renesas,rcar-gen2-wdt # R-Car Gen2 and RZ/G1
+
+ - items:
+ - enum:
+ - renesas,r8a774a1-wdt # RZ/G2M
+ - renesas,r8a774b1-wdt # RZ/G2N
+ - renesas,r8a774c0-wdt # RZ/G2E
+ - renesas,r8a7795-wdt # R-Car H3
+ - renesas,r8a7796-wdt # R-Car M3-W
+ - renesas,r8a77961-wdt # R-Car M3-W+
+ - renesas,r8a77965-wdt # R-Car M3-N
+ - renesas,r8a77970-wdt # R-Car V3M
+ - renesas,r8a77980-wdt # R-Car V3H
+ - renesas,r8a77990-wdt # R-Car E3
+ - renesas,r8a77995-wdt # R-Car D3
+ - const: renesas,rcar-gen3-wdt # R-Car Gen3 and RZ/G2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ timeout-sec: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rza-wdt
+then:
+ required:
+ - power-domains
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+ wdt0: watchdog@e6020000 {
+ compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+ reg = <0xe6020000 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ timeout-sec = <60>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
new file mode 100644
index 000000000000..a059d16cb4f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/socionext,uniphier-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier watchdog timer
+
+maintainers:
+ - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+
+allOf:
+ - $ref: "watchdog.yaml#"
+
+properties:
+ compatible:
+ const: socionext,uniphier-wdt
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ // The UniPhier watchdog should be a subnode of a "syscon" compatible node.
+
+ sysctrl@61840000 {
+ compatible = "socionext,uniphier-ld11-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0x61840000 0x10000>;
+
+ watchdog {
+ compatible = "socionext,uniphier-wdt";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
index e83026fef2e9..f0452791c598 100644
--- a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
@@ -57,7 +57,7 @@ examples:
watchdog0: rti@2200000 {
compatible = "ti,rti-wdt";
- reg = <0x0 0x2200000 0x0 0x100>;
+ reg = <0x2200000 0x100>;
clocks = <&k3_clks 252 1>;
power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 252 1>;
diff --git a/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt b/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt
deleted file mode 100644
index bf6337546dd1..000000000000
--- a/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-UniPhier watchdog timer controller
-
-This UniPhier watchdog timer controller must be under sysctrl node.
-
-Required properties:
-- compatible: should be "socionext,uniphier-wdt"
-
-Example:
-
- sysctrl@61840000 {
- compatible = "socionext,uniphier-ld11-sysctrl",
- "simple-mfd", "syscon";
- reg = <0x61840000 0x4000>;
-
- watchdog {
- compatible = "socionext,uniphier-wdt";
- }
-
- other nodes ...
- };
diff --git a/Documentation/devicetree/bindings/writing-bindings.txt b/Documentation/devicetree/bindings/writing-bindings.rst
index 27dfd2d8016e..45ff426d0019 100644
--- a/Documentation/devicetree/bindings/writing-bindings.txt
+++ b/Documentation/devicetree/bindings/writing-bindings.rst
@@ -1,13 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
DOs and DON'Ts for designing and writing Devicetree bindings
+============================================================
This is a list of common review feedback items focused on binding design. With
every rule, there are exceptions and bindings have many gray areas.
For guidelines related to patches, see
-Documentation/devicetree/bindings/submitting-patches.txt
+Documentation/devicetree/bindings/submitting-patches.rst
Overall design
+==============
- DO attempt to make bindings complete even if a driver doesn't support some
features. For example, if a device has an interrupt, then include the
@@ -32,6 +37,7 @@ Overall design
Properties
+==========
- DO make 'compatible' properties specific. DON'T use wildcards in compatible
strings. DO use fallback compatibles when devices are the same as or a subset
@@ -53,6 +59,7 @@ Properties
Board/SoC .dts Files
+====================
- DO put all MMIO devices under a bus node and not at the top-level.
diff --git a/Documentation/devicetree/changesets.txt b/Documentation/devicetree/changesets.rst
index cb488eeb6353..c7fd8cd6a270 100644
--- a/Documentation/devicetree/changesets.txt
+++ b/Documentation/devicetree/changesets.rst
@@ -1,3 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+DT Changesets
+=============
+
A DT changeset is a method which allows one to apply changes
in the live tree in such a way that either the full set of changes
will be applied, or none of them will be. If an error occurs partway
@@ -15,17 +21,17 @@ The sequence of a changeset is as follows.
1. of_changeset_init() - initializes a changeset
2. A number of DT tree change calls, of_changeset_attach_node(),
-of_changeset_detach_node(), of_changeset_add_property(),
-of_changeset_remove_property, of_changeset_update_property() to prepare
-a set of changes. No changes to the active tree are made at this point.
-All the change operations are recorded in the of_changeset 'entries'
-list.
+ of_changeset_detach_node(), of_changeset_add_property(),
+ of_changeset_remove_property, of_changeset_update_property() to prepare
+ a set of changes. No changes to the active tree are made at this point.
+ All the change operations are recorded in the of_changeset 'entries'
+ list.
3. of_changeset_apply() - Apply the changes to the tree. Either the
-entire changeset will get applied, or if there is an error the tree will
-be restored to the previous state. The core ensures proper serialization
-through locking. An unlocked version __of_changeset_apply is available,
-if needed.
+ entire changeset will get applied, or if there is an error the tree will
+ be restored to the previous state. The core ensures proper serialization
+ through locking. An unlocked version __of_changeset_apply is available,
+ if needed.
If a successfully applied changeset needs to be removed, it can be done
with of_changeset_revert().
diff --git a/Documentation/devicetree/dynamic-resolution-notes.txt b/Documentation/devicetree/dynamic-resolution-notes.rst
index c24ec366c5dc..570b7e1f39eb 100644
--- a/Documentation/devicetree/dynamic-resolution-notes.txt
+++ b/Documentation/devicetree/dynamic-resolution-notes.rst
@@ -1,5 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
Device Tree Dynamic Resolver Notes
-----------------------------------
+==================================
This document describes the implementation of the in-kernel
Device Tree resolver, residing in drivers/of/resolver.c
diff --git a/Documentation/devicetree/index.rst b/Documentation/devicetree/index.rst
new file mode 100644
index 000000000000..54026763916d
--- /dev/null
+++ b/Documentation/devicetree/index.rst
@@ -0,0 +1,17 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Open Firmware and Device Tree
+=============================
+
+.. toctree::
+ :maxdepth: 1
+
+ usage-model
+ writing-schema
+ changesets
+ dynamic-resolution-notes
+ of_unittest
+ overlay-notes
+
+ bindings/index
diff --git a/Documentation/devicetree/of_unittest.txt b/Documentation/devicetree/of_unittest.rst
index 3e4e7d48ae93..dea05214f3ad 100644
--- a/Documentation/devicetree/of_unittest.txt
+++ b/Documentation/devicetree/of_unittest.rst
@@ -1,9 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
Open Firmware Device Tree Unittest
-----------------------------------
+==================================
Author: Gaurav Minocha <gaurav.minocha.os@gmail.com>
1. Introduction
+===============
This document explains how the test data required for executing OF unittest
is attached to the live tree dynamically, independent of the machine's
@@ -11,8 +15,8 @@ architecture.
It is recommended to read the following documents before moving ahead.
-[1] Documentation/devicetree/usage-model.txt
-[2] http://www.devicetree.org/Device_Tree_Usage
+(1) Documentation/devicetree/usage-model.rst
+(2) http://www.devicetree.org/Device_Tree_Usage
OF Selftest has been designed to test the interface (include/linux/of.h)
provided to device driver developers to fetch the device information..etc.
@@ -21,79 +25,82 @@ most of the device drivers in various use cases.
2. Test-data
+============
The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains
the test data required for executing the unit tests automated in
drivers/of/unittest.c. Currently, following Device Tree Source Include files
-(.dtsi) are included in testcases.dts:
+(.dtsi) are included in testcases.dts::
-drivers/of/unittest-data/tests-interrupts.dtsi
-drivers/of/unittest-data/tests-platform.dtsi
-drivers/of/unittest-data/tests-phandle.dtsi
-drivers/of/unittest-data/tests-match.dtsi
+ drivers/of/unittest-data/tests-interrupts.dtsi
+ drivers/of/unittest-data/tests-platform.dtsi
+ drivers/of/unittest-data/tests-phandle.dtsi
+ drivers/of/unittest-data/tests-match.dtsi
-When the kernel is build with OF_SELFTEST enabled, then the following make rule
+When the kernel is build with OF_SELFTEST enabled, then the following make
+rule::
-$(obj)/%.dtb: $(src)/%.dts FORCE
- $(call if_changed_dep, dtc)
+ $(obj)/%.dtb: $(src)/%.dts FORCE
+ $(call if_changed_dep, dtc)
is used to compile the DT source file (testcases.dts) into a binary blob
(testcases.dtb), also referred as flattened DT.
After that, using the following rule the binary blob above is wrapped as an
-assembly file (testcases.dtb.S).
+assembly file (testcases.dtb.S)::
-$(obj)/%.dtb.S: $(obj)/%.dtb
- $(call cmd, dt_S_dtb)
+ $(obj)/%.dtb.S: $(obj)/%.dtb
+ $(call cmd, dt_S_dtb)
The assembly file is compiled into an object file (testcases.dtb.o), and is
linked into the kernel image.
2.1. Adding the test data
+-------------------------
Un-flattened device tree structure:
Un-flattened device tree consists of connected device_node(s) in form of a tree
-structure described below.
+structure described below::
-// following struct members are used to construct the tree
-struct device_node {
- ...
- struct device_node *parent;
- struct device_node *child;
- struct device_node *sibling;
- ...
- };
+ // following struct members are used to construct the tree
+ struct device_node {
+ ...
+ struct device_node *parent;
+ struct device_node *child;
+ struct device_node *sibling;
+ ...
+ };
Figure 1, describes a generic structure of machine's un-flattened device tree
considering only child and sibling pointers. There exists another pointer,
-*parent, that is used to traverse the tree in the reverse direction. So, at
+``*parent``, that is used to traverse the tree in the reverse direction. So, at
a particular level the child node and all the sibling nodes will have a parent
pointer pointing to a common node (e.g. child1, sibling2, sibling3, sibling4's
-parent points to root node)
-
-root ('/')
- |
-child1 -> sibling2 -> sibling3 -> sibling4 -> null
- | | | |
- | | | null
- | | |
- | | child31 -> sibling32 -> null
- | | | |
- | | null null
- | |
- | child21 -> sibling22 -> sibling23 -> null
- | | | |
- | null null null
- |
-child11 -> sibling12 -> sibling13 -> sibling14 -> null
- | | | |
- | | | null
- | | |
- null null child131 -> null
- |
- null
+parent points to root node)::
+
+ root ('/')
+ |
+ child1 -> sibling2 -> sibling3 -> sibling4 -> null
+ | | | |
+ | | | null
+ | | |
+ | | child31 -> sibling32 -> null
+ | | | |
+ | | null null
+ | |
+ | child21 -> sibling22 -> sibling23 -> null
+ | | | |
+ | null null null
+ |
+ child11 -> sibling12 -> sibling13 -> sibling14 -> null
+ | | | |
+ | | | null
+ | | |
+ null null child131 -> null
+ |
+ null
Figure 1: Generic structure of un-flattened device tree
@@ -101,10 +108,10 @@ Figure 1: Generic structure of un-flattened device tree
Before executing OF unittest, it is required to attach the test data to
machine's device tree (if present). So, when selftest_data_add() is called,
at first it reads the flattened device tree data linked into the kernel image
-via the following kernel symbols:
+via the following kernel symbols::
-__dtb_testcases_begin - address marking the start of test data blob
-__dtb_testcases_end - address marking the end of test data blob
+ __dtb_testcases_begin - address marking the start of test data blob
+ __dtb_testcases_end - address marking the end of test data blob
Secondly, it calls of_fdt_unflatten_tree() to unflatten the flattened
blob. And finally, if the machine's device tree (i.e live tree) is present,
@@ -113,15 +120,15 @@ attaches itself as a live device tree.
attach_node_and_children() uses of_attach_node() to attach the nodes into the
live tree as explained below. To explain the same, the test data tree described
- in Figure 2 is attached to the live tree described in Figure 1.
+in Figure 2 is attached to the live tree described in Figure 1::
-root ('/')
- |
- testcase-data
- |
- test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null
- | | | |
- test-child01 null null null
+ root ('/')
+ |
+ testcase-data
+ |
+ test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null
+ | | | |
+ test-child01 null null null
Figure 2: Example test data tree to be attached to live tree.
@@ -134,39 +141,39 @@ In the function of_attach_node(), the new node is attached as the child of the
given parent in live tree. But, if parent already has a child then the new node
replaces the current child and turns it into its sibling. So, when the testcase
data node is attached to the live tree above (Figure 1), the final structure is
- as shown in Figure 3.
-
-root ('/')
- |
-testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
- | | | | |
- (...) | | | null
- | | child31 -> sibling32 -> null
- | | | |
- | | null null
- | |
- | child21 -> sibling22 -> sibling23 -> null
- | | | |
- | null null null
- |
- child11 -> sibling12 -> sibling13 -> sibling14 -> null
- | | | |
- null null | null
- |
- child131 -> null
- |
- null
------------------------------------------------------------------------
-
-root ('/')
- |
-testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
- | | | | |
- | (...) (...) (...) null
- |
-test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null
- | | | |
- null null null test-child01
+as shown in Figure 3::
+
+ root ('/')
+ |
+ testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+ | | | | |
+ (...) | | | null
+ | | child31 -> sibling32 -> null
+ | | | |
+ | | null null
+ | |
+ | child21 -> sibling22 -> sibling23 -> null
+ | | | |
+ | null null null
+ |
+ child11 -> sibling12 -> sibling13 -> sibling14 -> null
+ | | | |
+ null null | null
+ |
+ child131 -> null
+ |
+ null
+ -----------------------------------------------------------------------
+
+ root ('/')
+ |
+ testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+ | | | | |
+ | (...) (...) (...) null
+ |
+ test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null
+ | | | |
+ null null null test-child01
Figure 3: Live device tree structure after attaching the testcase-data.
@@ -176,7 +183,7 @@ Astute readers would have noticed that test-child0 node becomes the last
sibling compared to the earlier structure (Figure 2). After attaching first
test-child0 the test-sibling1 is attached that pushes the child node
(i.e. test-child0) to become a sibling and makes itself a child node,
- as mentioned above.
+as mentioned above.
If a duplicate node is found (i.e. if a node with same full_name property is
already present in the live tree), then the node isn't attached rather its
@@ -185,6 +192,7 @@ update_node_properties().
2.2. Removing the test data
+---------------------------
Once the test case execution is complete, selftest_data_remove is called in
order to remove the device nodes attached initially (first the leaf nodes are
diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.rst
index 725fb8d255c1..c67cc676bbd2 100644
--- a/Documentation/devicetree/overlay-notes.txt
+++ b/Documentation/devicetree/overlay-notes.rst
@@ -1,9 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
Device Tree Overlay Notes
--------------------------
+=========================
This document describes the implementation of the in-kernel
device tree overlay functionality residing in drivers/of/overlay.c and is a
-companion document to Documentation/devicetree/dynamic-resolution-notes.txt[1]
+companion document to Documentation/devicetree/dynamic-resolution-notes.rst[1]
How overlays work
-----------------
@@ -15,10 +18,11 @@ Since the kernel mainly deals with devices, any new device node that result
in an active device should have it created while if the device node is either
disabled or removed all together, the affected device should be deregistered.
-Lets take an example where we have a foo board with the following base tree:
+Lets take an example where we have a foo board with the following base tree::
----- foo.dts -----------------------------------------------------------------
+ ---- foo.dts ---------------------------------------------------------------
/* FOO platform */
+ /dts-v1/;
/ {
compatible = "corp,foo";
@@ -30,32 +34,28 @@ Lets take an example where we have a foo board with the following base tree:
ocp: ocp {
/* peripherals that are always instantiated */
peripheral1 { ... };
- }
+ };
};
----- foo.dts -----------------------------------------------------------------
-
-The overlay bar.dts, when loaded (and resolved as described in [1]) should
-
----- bar.dts -----------------------------------------------------------------
-/plugin/; /* allow undefined label references and record them */
-/ {
- .... /* various properties for loader use; i.e. part id etc. */
- fragment@0 {
- target = <&ocp>;
- __overlay__ {
- /* bar peripheral */
- bar {
- compatible = "corp,bar";
- ... /* various properties and child nodes */
- }
+ ---- foo.dts ---------------------------------------------------------------
+
+The overlay bar.dts,
+::
+
+ ---- bar.dts - overlay target location by label ----------------------------
+ /dts-v1/;
+ /plugin/;
+ &ocp {
+ /* bar peripheral */
+ bar {
+ compatible = "corp,bar";
+ ... /* various properties and child nodes */
};
};
-};
----- bar.dts -----------------------------------------------------------------
+ ---- bar.dts ---------------------------------------------------------------
-result in foo+bar.dts
+when loaded (and resolved as described in [1]) should result in foo+bar.dts::
----- foo+bar.dts -------------------------------------------------------------
+ ---- foo+bar.dts -----------------------------------------------------------
/* FOO platform + bar peripheral */
/ {
compatible = "corp,foo";
@@ -73,26 +73,47 @@ result in foo+bar.dts
bar {
compatible = "corp,bar";
... /* various properties and child nodes */
- }
- }
+ };
+ };
};
----- foo+bar.dts -------------------------------------------------------------
+ ---- foo+bar.dts -----------------------------------------------------------
As a result of the overlay, a new device node (bar) has been created
so a bar platform device will be registered and if a matching device driver
is loaded the device will be created as expected.
+If the base DT was not compiled with the -@ option then the "&ocp" label
+will not be available to resolve the overlay node(s) to the proper location
+in the base DT. In this case, the target path can be provided. The target
+location by label syntax is preferred because the overlay can be applied to
+any base DT containing the label, no matter where the label occurs in the DT.
+
+The above bar.dts example modified to use target path syntax is::
+
+ ---- bar.dts - overlay target location by explicit path --------------------
+ /dts-v1/;
+ /plugin/;
+ &{/ocp} {
+ /* bar peripheral */
+ bar {
+ compatible = "corp,bar";
+ ... /* various properties and child nodes */
+ }
+ };
+ ---- bar.dts ---------------------------------------------------------------
+
+
Overlay in-kernel API
--------------------------------
The API is quite easy to use.
-1. Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
-return value is an error or a cookie identifying this overlay.
+1) Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
+ return value is an error or a cookie identifying this overlay.
-2. Call of_overlay_remove() to remove and cleanup the overlay changeset
-previously created via the call to of_overlay_fdt_apply(). Removal of an
-overlay changeset that is stacked by another will not be permitted.
+2) Call of_overlay_remove() to remove and cleanup the overlay changeset
+ previously created via the call to of_overlay_fdt_apply(). Removal of an
+ overlay changeset that is stacked by another will not be permitted.
Finally, if you need to remove all overlays in one-go, just call
of_overlay_remove_all() which will remove every single one in the correct
@@ -105,35 +126,3 @@ enum of_overlay_notify_action for details.
Note that a notifier callback is not supposed to store pointers to a device
tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
respective node it received.
-
-Overlay DTS Format
-------------------
-
-The DTS of an overlay should have the following format:
-
-{
- /* ignored properties by the overlay */
-
- fragment@0 { /* first child node */
-
- target=<phandle>; /* phandle target of the overlay */
- or
- target-path="/path"; /* target path of the overlay */
-
- __overlay__ {
- property-a; /* add property-a to the target */
- node-a { /* add to an existing, or create a node-a */
- ...
- };
- };
- }
- fragment@1 { /* second child node */
- ...
- };
- /* more fragments follow */
-}
-
-Using the non-phandle based target method allows one to use a base DT which does
-not contain a __symbols__ node, i.e. it was not compiled with the -@ option.
-The __symbols__ node is only required for the target=<phandle> method, since it
-contains the information required to map from a phandle to a tree location.
diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.rst
index 33a8aaac02a8..e1b42dc63f01 100644
--- a/Documentation/devicetree/usage-model.txt
+++ b/Documentation/devicetree/usage-model.rst
@@ -1,14 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
Linux and the Device Tree
--------------------------
+=========================
+
The Linux usage model for device tree data
-Author: Grant Likely <grant.likely@secretlab.ca>
+:Author: Grant Likely <grant.likely@secretlab.ca>
This article describes how Linux uses the device tree. An overview of
the device tree data format can be found on the device tree usage page
-at devicetree.org[1].
+at devicetree.org\ [1]_.
-[1] http://devicetree.org/Device_Tree_Usage
+.. [1] https://elinux.org/Device_Tree_Usage
The "Open Firmware Device Tree", or simply Device Tree (DT), is a data
structure and language for describing hardware. More specifically, it
@@ -57,7 +61,7 @@ Tree (FDT) was created which could be passed to the kernel as a binary
blob without requiring a real Open Firmware implementation. U-Boot,
kexec, and other bootloaders were modified to support both passing a
Device Tree Binary (dtb) and to modify a dtb at boot time. DT was
-also added to the PowerPC boot wrapper (arch/powerpc/boot/*) so that
+also added to the PowerPC boot wrapper (``arch/powerpc/boot/*``) so that
a dtb could be wrapped up with the kernel image to support booting
existing non-DT aware firmware.
@@ -68,7 +72,7 @@ out of mainline (nios) have some level of DT support.
2. Data Model
-------------
-If you haven't already read the Device Tree Usage[1] page,
+If you haven't already read the Device Tree Usage\ [1]_ page,
then go read it now. It's okay, I'll wait....
2.1 High Level View
@@ -88,6 +92,7 @@ duplication and make it easier to support a wide range of hardware
with a single kernel image.
Linux uses DT data for three major purposes:
+
1) platform identification,
2) runtime configuration, and
3) device population.
@@ -117,7 +122,7 @@ The 'compatible' property contains a sorted list of strings starting
with the exact name of the machine, followed by an optional list of
boards it is compatible with sorted from most compatible to least. For
example, the root compatible properties for the TI BeagleBoard and its
-successor, the BeagleBoard xM board might look like, respectively:
+successor, the BeagleBoard xM board might look like, respectively::
compatible = "ti,omap3-beagleboard", "ti,omap3450", "ti,omap3";
compatible = "ti,omap3-beagleboard-xm", "ti,omap3450", "ti,omap3";
@@ -183,7 +188,7 @@ configuration data like the kernel parameters string and the location
of an initrd image.
Most of this data is contained in the /chosen node, and when booting
-Linux it will look something like this:
+Linux it will look something like this::
chosen {
bootargs = "console=ttyS0,115200 loglevel=8";
@@ -251,9 +256,9 @@ platform devices roughly correspond to device nodes at the root of the
tree and children of simple memory mapped bus nodes.
About now is a good time to lay out an example. Here is part of the
-device tree for the NVIDIA Tegra board.
+device tree for the NVIDIA Tegra board::
-/{
+ /{
compatible = "nvidia,harmony", "nvidia,tegra20";
#address-cells = <1>;
#size-cells = <1>;
@@ -313,7 +318,7 @@ device tree for the NVIDIA Tegra board.
i2s-controller = <&i2s1>;
i2s-codec = <&wm8903>;
};
-};
+ };
At .init_machine() time, Tegra board support code will need to look at
this DT and decide which nodes to create platform_devices for.
@@ -379,13 +384,13 @@ device tree support code reflects that and makes the above example
simpler. The second argument to of_platform_populate() is an
of_device_id table, and any node that matches an entry in that table
will also get its child nodes registered. In the Tegra case, the code
-can look something like this:
+can look something like this::
-static void __init harmony_init_machine(void)
-{
+ static void __init harmony_init_machine(void)
+ {
/* ... */
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
+ }
"simple-bus" is defined in the Devicetree Specification as a property
meaning a simple memory mapped bus, so the of_platform_populate() code
diff --git a/Documentation/index.rst b/Documentation/index.rst
index af2b87afebc8..71eca3171574 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -1,3 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0
+
.. The Linux Kernel documentation master file, created by
sphinx-quickstart on Fri Feb 12 13:51:46 2016.
@@ -46,6 +48,7 @@ platform firmwares.
:maxdepth: 2
firmware-guide/index
+ devicetree/index
Application-developer documentation
-----------------------------------
diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst
index ba5e944c7a63..1699b7f8e63a 100644
--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@@ -16,7 +16,7 @@ for a list of items to check before
submitting code. If you are submitting a driver, also read
:ref:`Documentation/process/submitting-drivers.rst <submittingdrivers>`;
for device tree binding patches, read
-Documentation/devicetree/bindings/submitting-patches.txt.
+Documentation/devicetree/bindings/submitting-patches.rst.
Many of these steps describe the default behavior of the ``git`` version
control system; if you use ``git`` to prepare your patches, you'll find much
diff --git a/Documentation/translations/it_IT/process/submitting-patches.rst b/Documentation/translations/it_IT/process/submitting-patches.rst
index cba1f8cb61ed..7c23c08e4401 100644
--- a/Documentation/translations/it_IT/process/submitting-patches.rst
+++ b/Documentation/translations/it_IT/process/submitting-patches.rst
@@ -21,7 +21,7 @@ Leggete anche :ref:`Documentation/translations/it_IT/process/submit-checklist.rs
per una lista di punti da verificare prima di inviare del codice. Se state
inviando un driver, allora leggete anche :ref:`Documentation/translations/it_IT/process/submitting-drivers.rst <it_submittingdrivers>`;
per delle patch relative alle associazioni per Device Tree leggete
-Documentation/devicetree/bindings/submitting-patches.txt.
+Documentation/devicetree/bindings/submitting-patches.rst.
Molti di questi passi descrivono il comportamento di base del sistema di
controllo di versione ``git``; se utilizzate ``git`` per preparare le vostre
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d2a9236284b..df86f6f06000 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2713,8 +2713,8 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
W: http://wiki.xilinx.com
T: git https://github.com/Xilinx/linux-xlnx.git
-F: Documentation/devicetree/bindings/i2c/i2c-cadence.txt
-F: Documentation/devicetree/bindings/i2c/i2c-xiic.txt
+F: Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+F: Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
F: arch/arm/mach-zynq/
F: drivers/block/xsysace.c
F: drivers/clocksource/timer-cadence-ttc.c
@@ -4088,12 +4088,11 @@ M: Charles Keepax <ckeepax@opensource.cirrus.com>
M: Richard Fitzgerald <rf@opensource.cirrus.com>
L: patches@opensource.cirrus.com
S: Supported
-F: Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
+F: Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
+F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml
+F: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
+F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
+F: Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
F: Documentation/hwmon/lochnagar.rst
F: drivers/clk/clk-lochnagar.c
F: drivers/hwmon/lochnagar-hwmon.c
@@ -4113,9 +4112,9 @@ L: patches@opensource.cirrus.com
S: Supported
W: https://github.com/CirrusLogic/linux-drivers/wiki
T: git https://github.com/CirrusLogic/linux-drivers.git
-F: Documentation/devicetree/bindings/mfd/madera.txt
-F: Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
-F: Documentation/devicetree/bindings/sound/madera.txt
+F: Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+F: Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
+F: Documentation/devicetree/bindings/sound/cirrus,madera.yaml
F: drivers/gpio/gpio-madera*
F: drivers/irqchip/irq-madera*
F: drivers/mfd/cs47l*
@@ -12653,8 +12652,8 @@ M: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
M: Frank Rowand <frowand.list@gmail.com>
L: devicetree@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/dynamic-resolution-notes.txt
-F: Documentation/devicetree/overlay-notes.txt
+F: Documentation/devicetree/dynamic-resolution-notes.rst
+F: Documentation/devicetree/overlay-notes.rst
F: drivers/of/overlay.c
F: drivers/of/resolver.c
K: of_overlay_notifier_
@@ -18410,11 +18409,11 @@ L: patches@opensource.cirrus.com
S: Supported
W: https://github.com/CirrusLogic/linux-drivers/wiki
T: git https://github.com/CirrusLogic/linux-drivers.git
-F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt
-F: Documentation/devicetree/bindings/mfd/arizona.txt
+F: Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
+F: Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
F: Documentation/devicetree/bindings/mfd/wm831x.txt
-F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt
-F: Documentation/devicetree/bindings/sound/wlf,arizona.txt
+F: Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
+F: Documentation/devicetree/bindings/sound/wlf,arizona.yaml
F: Documentation/hwmon/wm83??.rst
F: arch/arm/mach-s3c64xx/mach-crag6410*
F: drivers/clk/clk-wm83*.c
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 08fd823edac9..fe64430b438a 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -286,7 +286,6 @@ int of_detach_node(struct device_node *np)
{
struct of_reconfig_data rd;
unsigned long flags;
- int rc = 0;
memset(&rd, 0, sizeof(rd));
rd.dn = np;
@@ -301,7 +300,7 @@ int of_detach_node(struct device_node *np)
of_reconfig_notify(OF_RECONFIG_DETACH_NODE, &rd);
- return rc;
+ return 0;
}
EXPORT_SYMBOL_GPL(of_detach_node);
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 2cdf64d2456f..4602e467ca8b 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -471,7 +471,7 @@ void *initial_boot_params __ro_after_init;
static u32 of_fdt_crc32;
/**
- * res_mem_reserve_reg() - reserve all memory described in 'reg' property
+ * __reserved_mem_reserve_reg() - reserve all memory described in 'reg' property
*/
static int __init __reserved_mem_reserve_reg(unsigned long node,
const char *uname)
@@ -643,8 +643,6 @@ int __init of_scan_flat_dt(int (*it)(unsigned long node,
offset = fdt_next_node(blob, offset, &depth)) {
pathp = fdt_get_name(blob, offset, NULL);
- if (*pathp == '/')
- pathp = kbasename(pathp);
rc = it(offset, pathp, depth, data);
}
return rc;
@@ -671,8 +669,6 @@ int __init of_scan_flat_dt_subnodes(unsigned long parent,
int rc;
pathp = fdt_get_name(blob, node, NULL);
- if (*pathp == '/')
- pathp = kbasename(pathp);
rc = it(node, pathp, data);
if (rc)
return rc;
@@ -1078,7 +1074,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
#endif
#endif /* CONFIG_CMDLINE */
- pr_debug("Command line is: %s\n", (char*)data);
+ pr_debug("Command line is: %s\n", (char *)data);
rng_seed = of_get_flat_dt_prop(node, "rng-seed", &l);
if (rng_seed && l > 0) {
diff --git a/drivers/of/kobj.c b/drivers/of/kobj.c
index c72eef988041..a32e60b024b8 100644
--- a/drivers/of/kobj.c
+++ b/drivers/of/kobj.c
@@ -134,8 +134,6 @@ int __of_attach_node_sysfs(struct device_node *np)
if (!name)
return -ENOMEM;
- of_node_get(np);
-
rc = kobject_add(&np->kobj, parent, "%s", name);
kfree(name);
if (rc)
@@ -144,6 +142,7 @@ int __of_attach_node_sysfs(struct device_node *np)
for_each_property_of_node(np, pp)
__of_add_property_sysfs(np, pp);
+ of_node_get(np);
return 0;
}
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index f61e8739502a..6877080c8af9 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -46,7 +46,7 @@ static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
}
/**
- * res_mem_save_node() - save fdt node for second pass initialization
+ * fdt_reserved_mem_save_node() - save fdt node for second pass initialization
*/
void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname,
phys_addr_t base, phys_addr_t size)
@@ -68,8 +68,8 @@ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname,
}
/**
- * res_mem_alloc_size() - allocate reserved memory described by 'size', 'align'
- * and 'alloc-ranges' properties
+ * __reserved_mem_alloc_size() - allocate reserved memory described by
+ * 'size', 'align' and 'alloc-ranges' properties.
*/
static int __init __reserved_mem_alloc_size(unsigned long node,
const char *uname, phys_addr_t *res_base, phys_addr_t *res_size)
@@ -165,7 +165,7 @@ static const struct of_device_id __rmem_of_table_sentinel
__used __section(__reservedmem_of_table_end);
/**
- * res_mem_init_node() - call region specific reserved memory init code
+ * __reserved_mem_init_node() - call region specific reserved memory init code
*/
static int __init __reserved_mem_init_node(struct reserved_mem *rmem)
{
@@ -232,7 +232,7 @@ static void __init __rmem_check_for_overlap(void)
}
/**
- * fdt_init_reserved_mem - allocate and init all saved reserved memory regions
+ * fdt_init_reserved_mem() - allocate and init all saved reserved memory regions
*/
void __init fdt_init_reserved_mem(void)
{
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 3371e4a06248..3627fee60215 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -291,7 +291,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
#endif /* CONFIG_ARM_AMBA */
/**
- * of_devname_lookup() - Given a device node, lookup the preferred Linux name
+ * of_dev_lookup() - Given a device node, lookup the preferred Linux name
*/
static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *lookup,
struct device_node *np)
diff --git a/drivers/of/property.c b/drivers/of/property.c
index b4916dcc9e72..1f2086f4e7ce 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -1045,8 +1045,20 @@ static int of_link_to_phandle(struct device *dev, struct device_node *sup_np,
* Find the device node that contains the supplier phandle. It may be
* @sup_np or it may be an ancestor of @sup_np.
*/
- while (sup_np && !of_find_property(sup_np, "compatible", NULL))
+ while (sup_np) {
+
+ /* Don't allow linking to a disabled supplier */
+ if (!of_device_is_available(sup_np)) {
+ of_node_put(sup_np);
+ sup_np = NULL;
+ }
+
+ if (of_find_property(sup_np, "compatible", NULL))
+ break;
+
sup_np = of_get_next_parent(sup_np);
+ }
+
if (!sup_np) {
dev_dbg(dev, "Not linking to %pOFP - No device\n", tmp_np);
return -ENODEV;
@@ -1074,7 +1086,7 @@ static int of_link_to_phandle(struct device *dev, struct device_node *sup_np,
return -EAGAIN;
}
if (!device_link_add(dev, sup_dev, dl_flags))
- ret = -EAGAIN;
+ ret = -EINVAL;
put_device(sup_dev);
return ret;
}
@@ -1206,6 +1218,7 @@ DEFINE_SIMPLE_PROP(interrupt_parent, "interrupt-parent", NULL)
DEFINE_SIMPLE_PROP(dmas, "dmas", "#dma-cells")
DEFINE_SIMPLE_PROP(power_domains, "power-domains", "#power-domain-cells")
DEFINE_SIMPLE_PROP(hwlocks, "hwlocks", "#hwlock-cells")
+DEFINE_SIMPLE_PROP(extcon, "extcon", NULL)
DEFINE_SUFFIX_PROP(regulators, "-supply", NULL)
DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells")
DEFINE_SUFFIX_PROP(gpios, "-gpios", "#gpio-cells")
@@ -1230,6 +1243,7 @@ static const struct supplier_bindings of_supplier_bindings[] = {
{ .parse_prop = parse_dmas, },
{ .parse_prop = parse_power_domains, },
{ .parse_prop = parse_hwlocks, },
+ { .parse_prop = parse_extcon, },
{ .parse_prop = parse_regulators, },
{ .parse_prop = parse_gpio, },
{ .parse_prop = parse_gpios, },
@@ -1296,7 +1310,7 @@ static int of_link_to_suppliers(struct device *dev,
if (of_link_property(dev, con_np, p->name))
ret = -ENODEV;
- for_each_child_of_node(con_np, child)
+ for_each_available_child_of_node(con_np, child)
if (of_link_to_suppliers(dev, child) && !ret)
ret = -EAGAIN;
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index 7e5ac3c00891..ab76cdd06199 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -74,7 +74,7 @@ struct mfd_cell {
/*
* Device Tree compatible string
- * See: Documentation/devicetree/usage-model.txt Chapter 2.2 for details
+ * See: Documentation/devicetree/usage-model.rst Chapter 2.2 for details
*/
const char *of_compatible;
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 10a0e035a787..197436b20288 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2607,7 +2607,7 @@ sub process {
if (($last_binding_patch != -1) &&
($last_binding_patch ^ $is_binding_patch)) {
WARN("DT_SPLIT_BINDING_PATCH",
- "DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.txt\n");
+ "DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst\n");
}
}