diff options
115 files changed, 2727 insertions, 1473 deletions
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml new file mode 100644 index 000000000000..175f5c8f2bc5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# +title: Marvell Armada 3720 UART clocks + +maintainers: + - Pali Rohár <pali@kernel.org> + +properties: + compatible: + const: marvell,armada-3700-uart-clock + + reg: + items: + - description: UART Clock Control Register + - description: UART 2 Baud Rate Divisor Register + + clocks: + description: | + List of parent clocks suitable for UART from following set: + "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal" + UART clock can use one from this set and when more are provided + then kernel would choose and configure the most suitable one. + It is suggest to specify at least one TBG clock to achieve + baudrates above 230400 and also to specify clock which bootloader + used for UART (most probably xtal) for smooth boot log on UART. + + clock-names: + items: + - const: TBG-A-P + - const: TBG-B-P + - const: TBG-A-S + - const: TBG-B-S + - const: xtal + minItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + uartclk: clock-controller@12010 { + compatible = "marvell,armada-3700-uart-clock"; + reg = <0x12010 0x4>, <0x12210 0x4>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>; + clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index 6e04e3848261..ff364bd0fbac 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -20,15 +20,15 @@ properties: - fsl,ls1021a-lpuart - fsl,ls1028a-lpuart - fsl,imx7ulp-lpuart - - fsl,imx8qm-lpuart + - fsl,imx8qxp-lpuart - fsl,imxrt1050-lpuart - items: - - enum: - - fsl,imx8qxp-lpuart - - fsl,imx8ulp-lpuart + - const: fsl,imx8ulp-lpuart - const: fsl,imx7ulp-lpuart - items: - - const: fsl,imx8qm-lpuart + - enum: + - fsl,imx8qm-lpuart + - fsl,imx8dxl-lpuart - const: fsl,imx8qxp-lpuart reg: diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index b3a0bfef0d54..113b5d6a2245 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -20,6 +20,7 @@ Required properties: * "mediatek,mt8135-uart" for MT8135 compatible UARTS * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS + * "mediatek,mt8186-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS * "mediatek,mt8516-uart" for MT8516 compatible UARTS diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index 2d0dbdf32d1d..a062bbca532c 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -14,7 +14,10 @@ Required properties: is provided (possible only with the "marvell,armada-3700-uart" compatible string for backward compatibility), it will only work if the baudrate was initialized by the bootloader and no baudrate - change will then be possible. + change will then be possible. When provided it should be UART1-clk + for standard variant of UART and UART2-clk for extended variant + of UART. TBG clock (with UART TBG divisors d1=d2=1) or xtal clock + should not be used and are supported only for backward compatibility. - interrupts: - Must contain three elements for the standard variant of the IP (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx", @@ -34,7 +37,7 @@ Example: uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; reg = <0x12000 0x18>; - clocks = <&xtalclk>; + clocks = <&uartclk 0>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, @@ -45,7 +48,7 @@ Example: uart1: serial@12200 { compatible = "marvell,armada-3700-uart-ext"; reg = <0x12200 0x30>; - clocks = <&xtalclk>; + clocks = <&uartclk 1>; interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml index 8dda4e10e09d..bf7708a7a2c0 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml @@ -17,6 +17,7 @@ properties: oneOf: - items: - enum: + - renesas,r9a07g043-sci # RZ/G2UL - renesas,r9a07g044-sci # RZ/G2{L,LC} - renesas,r9a07g054-sci # RZ/V2L - const: renesas,sci # generic SCI compatible UART @@ -67,6 +68,7 @@ if: compatible: contains: enum: + - renesas,r9a07g043-sci - renesas,r9a07g044-sci - renesas,r9a07g054-sci then: diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index ba5d3e0acc63..5d37f8f189fb 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -73,12 +73,12 @@ properties: - items: - enum: - renesas,scif-r9a07g044 # RZ/G2{L,LC} - - renesas,scif-r9a07g054 # RZ/V2L - items: - enum: + - renesas,scif-r9a07g043 # RZ/G2UL - renesas,scif-r9a07g054 # RZ/V2L - - const: renesas,scif-r9a07g044 # RZ/G2{L,LC} fallback for RZ/V2L + - const: renesas,scif-r9a07g044 # RZ/G2{L,LC} fallback reg: maxItems: 1 @@ -167,7 +167,6 @@ if: - renesas,rcar-gen3-scif - renesas,rcar-gen4-scif - renesas,scif-r9a07g044 - - renesas,scif-r9a07g054 then: required: - resets diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 2940afb874b3..d4688e317fc5 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -20,12 +20,14 @@ properties: items: - enum: - apple,s5l-uart + - axis,artpec8-uart - samsung,s3c2410-uart - samsung,s3c2412-uart - samsung,s3c2440-uart - samsung,s3c6400-uart - samsung,s5pv210-uart - samsung,exynos4210-uart + - samsung,exynos5433-uart - samsung,exynos850-uart reg: @@ -110,7 +112,9 @@ allOf: contains: enum: - apple,s5l-uart + - axis,artpec8-uart - samsung,exynos4210-uart + - samsung,exynos5433-uart then: properties: clocks: diff --git a/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml new file mode 100644 index 000000000000..2e9b64abde70 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/sunplus,sp7021-uart.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Sunplus SoC SP7021 UART Controller Device Tree Bindings + +maintainers: + - Hammer Hsieh <hammerh0314@gmail.com> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: sunplus,sp7021-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + aliases { + serial0 = &uart0; + }; + + uart0: serial@9c000900 { + compatible = "sunplus,sp7021-uart"; + reg = <0x9c000900 0x80>; + interrupt-parent = <&intc>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc 0x28>; + resets = <&rstc 0x18>; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index d42587c78d80..741825cff43c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11665,6 +11665,13 @@ F: Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml F: drivers/phy/marvell/phy-mvebu-a3700-comphy.c F: drivers/phy/marvell/phy-mvebu-a3700-utmi.c +MARVELL ARMADA 3700 SERIAL DRIVER +M: Pali Rohár <pali@kernel.org> +S: Maintained +F: Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml +F: Documentation/devicetree/bindings/serial/mvebu-uart.txt +F: drivers/tty/serial/mvebu-uart.c + MARVELL ARMADA DRM SUPPORT M: Russell King <linux@armlinux.org.uk> S: Maintained @@ -18853,6 +18860,12 @@ S: Maintained F: Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml F: drivers/spi/spi-sunplus-sp7021.c +SUNPLUS UART DRIVER +M: Hammer Hsieh <hammerh0314@gmail.com> +S: Maintained +F: Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml +F: drivers/tty/serial/sunplus-uart.c + SUPERH M: Yoshinori Sato <ysato@users.sourceforge.jp> M: Rich Felker <dalias@libc.org> diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 30233de58bb3..8c8bb97c9d30 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -132,10 +132,20 @@ reg = <0x11500 0x40>; }; + uartclk: clock-controller@12010 { + compatible = "marvell,armada-3700-uart-clock"; + reg = <0x12010 0x4>, <0x12210 0x4>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", + "TBG-B-S", "xtal"; + #clock-cells = <1>; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; reg = <0x12000 0x18>; - clocks = <&xtalclk>; + clocks = <&uartclk 0>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, @@ -147,7 +157,7 @@ uart1: serial@12200 { compatible = "marvell,armada-3700-uart-ext"; reg = <0x12200 0x30>; - clocks = <&xtalclk>; + clocks = <&uartclk 1>; interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/ia64/include/uapi/asm/termbits.h b/arch/ia64/include/uapi/asm/termbits.h deleted file mode 100644 index 000a1a297c75..000000000000 --- a/arch/ia64/include/uapi/asm/termbits.h +++ /dev/null @@ -1,209 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_IA64_TERMBITS_H -#define _ASM_IA64_TERMBITS_H - -/* - * Based on <asm-i386/termbits.h>. - * - * Modified 1999 - * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co - * - * 99/01/28 Added new baudrates - */ - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_IA64_TERMBITS_H */ diff --git a/arch/xtensa/include/uapi/asm/termbits.h b/arch/xtensa/include/uapi/asm/termbits.h deleted file mode 100644 index d4206a7c5138..000000000000 --- a/arch/xtensa/include/uapi/asm/termbits.h +++ /dev/null @@ -1,221 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * include/asm-xtensa/termbits.h - * - * Copied from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TERMBITS_H -#define _XTENSA_TERMBITS_H - - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ - -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ - -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ - -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ - -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ - -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ - -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ - -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ - -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _XTENSA_TERMBITS_H */ diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c index 04c0823e0359..414aa82abc39 100644 --- a/drivers/mmc/core/sdio_uart.c +++ b/drivers/mmc/core/sdio_uart.c @@ -28,6 +28,7 @@ #include <linux/sched.h> #include <linux/mutex.h> #include <linux/seq_file.h> +#include <linux/serial.h> #include <linux/serial_reg.h> #include <linux/circ_buf.h> #include <linux/tty.h> @@ -250,21 +251,7 @@ static void sdio_uart_change_speed(struct sdio_uart_port *port, unsigned char cval, fcr = 0; unsigned int baud, quot; - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } + cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag)); if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 1e60dbef676c..533d02b38e02 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -538,10 +538,8 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info) */ free_irq(IRQ_AMIGA_VERTB, info); - if (info->xmit.buf) { - free_page((unsigned long) info->xmit.buf); - info->xmit.buf = NULL; - } + free_page((unsigned long)info->xmit.buf); + info->xmit.buf = NULL; info->IER = 0; amiga_custom.intena = IF_RBF | IF_TBE; diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index 5ed19a9857ad..ad13532e92fe 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -434,7 +434,7 @@ static int goldfish_tty_remove(struct platform_device *pdev) } #ifdef CONFIG_GOLDFISH_TTY_EARLY_CONSOLE -static void gf_early_console_putchar(struct uart_port *port, int ch) +static void gf_early_console_putchar(struct uart_port *port, unsigned char ch) { __raw_writel(ch, port->membase); } diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 8e0edb7d93fd..bd61f9372d83 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -15,7 +15,7 @@ #define DCC_STATUS_RX (1 << 30) #define DCC_STATUS_TX (1 << 29) -static void dcc_uart_console_putchar(struct uart_port *port, int ch) +static void dcc_uart_console_putchar(struct uart_port *port, unsigned char ch) { while (__dcc_getstatus() & DCC_STATUS_TX) cpu_relax(); diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c index 82a76cac94de..32366caca662 100644 --- a/drivers/tty/hvc/hvc_iucv.c +++ b/drivers/tty/hvc/hvc_iucv.c @@ -1417,7 +1417,9 @@ out_error: */ static int __init hvc_iucv_config(char *val) { - return kstrtoul(val, 10, &hvc_iucv_devices); + if (kstrtoul(val, 10, &hvc_iucv_devices)) + pr_warn("hvc_iucv= invalid parameter value '%s'\n", val); + return 1; } diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index c858aff721c4..6ebd3e4ed859 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -275,9 +275,6 @@ struct mxser_port { u8 read_status_mask; u8 ignore_status_mask; u8 xmit_fifo_size; - unsigned int xmit_head; - unsigned int xmit_tail; - unsigned int xmit_cnt; spinlock_t slock; }; @@ -591,21 +588,7 @@ static void mxser_change_speed(struct tty_struct *tty, struct ktermios *old_term } /* byte size and parity */ - switch (cflag & CSIZE) { - default: - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - case CS8: - cval = UART_LCR_WLEN8; - break; - } + cval = UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag)); if (cflag & CSTOPB) cval |= UART_LCR_STOP; @@ -742,22 +725,21 @@ static void mxser_disable_and_clear_FIFO(struct mxser_port *info) static int mxser_activate(struct tty_port *port, struct tty_struct *tty) { struct mxser_port *info = container_of(port, struct mxser_port, port); - unsigned long page; unsigned long flags; + int ret; - page = __get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; + ret = tty_port_alloc_xmit_buf(port); + if (ret < 0) + return ret; spin_lock_irqsave(&info->slock, flags); if (!info->type) { set_bit(TTY_IO_ERROR, &tty->flags); - free_page(page); spin_unlock_irqrestore(&info->slock, flags); - return 0; + ret = 0; + goto err_free_xmit; } - info->port.xmit_buf = (unsigned char *) page; /* * Clear the FIFO buffers and disable them @@ -775,8 +757,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty) if (capable(CAP_SYS_ADMIN)) { set_bit(TTY_IO_ERROR, &tty->flags); return 0; - } else - return -ENODEV; + } + + ret = -ENODEV; + goto err_free_xmit; } /* @@ -812,7 +796,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty) (void) inb(info->ioaddr + UART_MSR); clear_bit(TTY_IO_ERROR, &tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + kfifo_reset(&port->xmit_fifo); /* * and set the speed of the serial port @@ -821,6 +805,9 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty) spin_unlock_irqrestore(&info->slock, flags); return 0; +err_free_xmit: + tty_port_free_xmit_buf(port); + return ret; } /* @@ -855,14 +842,6 @@ static void mxser_shutdown_port(struct tty_port *port) */ wake_up_interruptible(&info->port.delta_msr_wait); - /* - * Free the xmit buffer, if necessary - */ - if (info->port.xmit_buf) { - free_page((unsigned long) info->port.xmit_buf); - info->port.xmit_buf = NULL; - } - info->IER = 0; outb(0x00, info->ioaddr + UART_IER); @@ -877,6 +856,11 @@ static void mxser_shutdown_port(struct tty_port *port) mxser_must_no_sw_flow_control(info->ioaddr); spin_unlock_irqrestore(&info->slock, flags); + + /* make sure ISR is not running while we free the buffer */ + synchronize_irq(info->board->irq); + + tty_port_free_xmit_buf(port); } /* @@ -900,9 +884,8 @@ static void mxser_flush_buffer(struct tty_struct *tty) struct mxser_port *info = tty->driver_data; unsigned long flags; - spin_lock_irqsave(&info->slock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + kfifo_reset(&info->port.xmit_fifo); outb(info->FCR | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, info->ioaddr + UART_FCR); @@ -919,50 +902,34 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) { - int c, total = 0; struct mxser_port *info = tty->driver_data; unsigned long flags; + int written; + bool is_empty; - while (1) { - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) - break; - - memcpy(info->port.xmit_buf + info->xmit_head, buf, c); - spin_lock_irqsave(&info->slock, flags); - info->xmit_head = (info->xmit_head + c) & - (SERIAL_XMIT_SIZE - 1); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->slock, flags); - - buf += c; - count -= c; - total += c; - } + spin_lock_irqsave(&info->slock, flags); + written = kfifo_in(&info->port.xmit_fifo, buf, count); + is_empty = kfifo_is_empty(&info->port.xmit_fifo); + spin_unlock_irqrestore(&info->slock, flags); - if (info->xmit_cnt && !tty->flow.stopped) + if (!is_empty && !tty->flow.stopped) if (!tty->hw_stopped || mxser_16550A_or_MUST(info)) mxser_start_tx(info); - return total; + return written; } static int mxser_put_char(struct tty_struct *tty, unsigned char ch) { struct mxser_port *info = tty->driver_data; unsigned long flags; - - if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) - return 0; + int ret; spin_lock_irqsave(&info->slock, flags); - info->port.xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE - 1; - info->xmit_cnt++; + ret = kfifo_put(&info->port.xmit_fifo, ch); spin_unlock_irqrestore(&info->slock, flags); - return 1; + return ret; } @@ -970,7 +937,7 @@ static void mxser_flush_chars(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; - if (!info->xmit_cnt || tty->flow.stopped || + if (kfifo_is_empty(&info->port.xmit_fifo) || tty->flow.stopped || (tty->hw_stopped && !mxser_16550A_or_MUST(info))) return; @@ -980,16 +947,15 @@ static void mxser_flush_chars(struct tty_struct *tty) static unsigned int mxser_write_room(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; - int ret; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - return ret < 0 ? 0 : ret; + return kfifo_avail(&info->port.xmit_fifo); } static unsigned int mxser_chars_in_buffer(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; - return info->xmit_cnt; + + return kfifo_len(&info->port.xmit_fifo); } /* @@ -1378,7 +1344,7 @@ static void mxser_start(struct tty_struct *tty) unsigned long flags; spin_lock_irqsave(&info->slock, flags); - if (info->xmit_cnt) + if (!kfifo_is_empty(&info->port.xmit_fifo)) __mxser_start_tx(info); spin_unlock_irqrestore(&info->slock, flags); } @@ -1609,7 +1575,7 @@ static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port return; } - if (!port->xmit_cnt || tty->flow.stopped || + if (kfifo_is_empty(&port->port.xmit_fifo) || tty->flow.stopped || (tty->hw_stopped && !mxser_16550A_or_MUST(port))) { __mxser_stop_tx(port); return; @@ -1617,18 +1583,19 @@ static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port count = port->xmit_fifo_size; do { - outb(port->port.xmit_buf[port->xmit_tail++], - port->ioaddr + UART_TX); - port->xmit_tail &= SERIAL_XMIT_SIZE - 1; - port->icount.tx++; - if (!--port->xmit_cnt) + unsigned char c; + + if (!kfifo_get(&port->port.xmit_fifo, &c)) break; + + outb(c, port->ioaddr + UART_TX); + port->icount.tx++; } while (--count > 0); - if (port->xmit_cnt < WAKEUP_CHARS) + if (kfifo_len(&port->port.xmit_fifo) < WAKEUP_CHARS) tty_wakeup(tty); - if (!port->xmit_cnt) + if (kfifo_is_empty(&port->port.xmit_fifo)) __mxser_stop_tx(port); } diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index 92e3433276f8..0180e1e4e75d 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -704,13 +704,10 @@ static const struct acpi_device_id serdev_acpi_devices_blacklist[] = { static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level, void *data, void **return_value) { + struct acpi_device *adev = acpi_fetch_acpi_dev(handle); struct serdev_controller *ctrl = data; - struct acpi_device *adev; - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - - if (acpi_device_enumerated(adev)) + if (!adev || acpi_device_enumerated(adev)) return AE_OK; /* Skip if black listed */ diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c index 09baef4ccc39..7520cc02fd4d 100644 --- a/drivers/tty/serial/21285.c +++ b/drivers/tty/serial/21285.c @@ -403,7 +403,7 @@ static void serial21285_setup_ports(void) } #ifdef CONFIG_SERIAL_21285_CONSOLE -static void serial21285_console_putchar(struct uart_port *port, int ch) +static void serial21285_console_putchar(struct uart_port *port, unsigned char ch) { while (*CSR_UARTFLG & 0x20) barrier(); diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 2350fb3bb5e4..93fe10c680fb 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -82,7 +82,7 @@ static ssize_t lpc_address_show(struct device *dev, addr = (aspeed_vuart_readb(vuart, ASPEED_VUART_ADDRH) << 8) | (aspeed_vuart_readb(vuart, ASPEED_VUART_ADDRL)); - return snprintf(buf, PAGE_SIZE - 1, "0x%x\n", addr); + return sysfs_emit(buf, "0x%x\n", addr); } static int aspeed_vuart_set_lpc_address(struct aspeed_vuart *vuart, u32 addr) @@ -124,7 +124,7 @@ static ssize_t sirq_show(struct device *dev, reg &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; reg >>= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; - return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg); + return sysfs_emit(buf, "%u\n", reg); } static int aspeed_vuart_set_sirq(struct aspeed_vuart *vuart, u32 sirq) @@ -171,7 +171,7 @@ static ssize_t sirq_polarity_show(struct device *dev, reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRA); reg &= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; - return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg ? 1 : 0); + return sysfs_emit(buf, "%u\n", reg ? 1 : 0); } static void aspeed_vuart_set_sirq_polarity(struct aspeed_vuart *vuart, @@ -487,7 +487,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) port.port.irq = irq_of_parse_and_map(np, 0); port.port.handle_irq = aspeed_vuart_handle_irq; port.port.iotype = UPIO_MEM; - port.port.type = PORT_16550A; + port.port.type = PORT_ASPEED_VUART; port.port.uartclk = clk; port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST; diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index fd95860cd661..2a1226a78a0c 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/property.h> #include "8250.h" @@ -44,6 +45,10 @@ struct bcm2835aux_data { u32 cntl; }; +struct bcm2835_aux_serial_driver_data { + resource_size_t offset; +}; + static void bcm2835aux_rs485_start_tx(struct uart_8250_port *up) { if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) { @@ -80,9 +85,12 @@ static void bcm2835aux_rs485_stop_tx(struct uart_8250_port *up) static int bcm2835aux_serial_probe(struct platform_device *pdev) { + const struct bcm2835_aux_serial_driver_data *bcm_data; struct uart_8250_port up = { }; struct bcm2835aux_data *data; + resource_size_t offset = 0; struct resource *res; + unsigned int uartclk; int ret; /* allocate the custom structure */ @@ -109,9 +117,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); /* get the clock - this also enables the HW */ - data->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(data->clk)) - return dev_err_probe(&pdev->dev, PTR_ERR(data->clk), "could not get clk\n"); + data->clk = devm_clk_get_optional(&pdev->dev, NULL); /* get the interrupt */ ret = platform_get_irq(pdev, 0); @@ -125,8 +131,24 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) dev_err(&pdev->dev, "memory resource not found"); return -EINVAL; } - up.port.mapbase = res->start; - up.port.mapsize = resource_size(res); + + bcm_data = device_get_match_data(&pdev->dev); + + /* Some UEFI implementations (e.g. tianocore/edk2 for the Raspberry Pi) + * describe the miniuart with a base address that encompasses the auxiliary + * registers shared between the miniuart and spi. + * + * This is due to historical reasons, see discussion here : + * https://edk2.groups.io/g/devel/topic/87501357#84349 + * + * We need to add the offset between the miniuart and auxiliary + * registers to get the real miniuart base address. + */ + if (bcm_data) + offset = bcm_data->offset; + + up.port.mapbase = res->start + offset; + up.port.mapsize = resource_size(res) - offset; /* Check for a fixed line number */ ret = of_alias_get_id(pdev->dev.of_node, "serial"); @@ -141,12 +163,19 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) return ret; } + uartclk = clk_get_rate(data->clk); + if (!uartclk) { + ret = device_property_read_u32(&pdev->dev, "clock-frequency", &uartclk); + if (ret) + return dev_err_probe(&pdev->dev, ret, "could not get clk rate\n"); + } + /* the HW-clock divider for bcm2835aux is 8, * but 8250 expects a divider of 16, * so we have to multiply the actual clock by 2 * to get identical baudrates. */ - up.port.uartclk = clk_get_rate(data->clk) * 2; + up.port.uartclk = uartclk * 2; /* register the port */ ret = serial8250_register_8250_port(&up); @@ -173,16 +202,27 @@ static int bcm2835aux_serial_remove(struct platform_device *pdev) return 0; } +static const struct bcm2835_aux_serial_driver_data bcm2835_acpi_data = { + .offset = 0x40, +}; + static const struct of_device_id bcm2835aux_serial_match[] = { { .compatible = "brcm,bcm2835-aux-uart" }, { }, }; MODULE_DEVICE_TABLE(of, bcm2835aux_serial_match); +static const struct acpi_device_id bcm2835aux_serial_acpi_match[] = { + { "BCM2836", (kernel_ulong_t)&bcm2835_acpi_data }, + { } +}; +MODULE_DEVICE_TABLE(acpi, bcm2835aux_serial_acpi_match); + static struct platform_driver bcm2835aux_serial_driver = { .driver = { .name = "bcm2835-aux-uart", .of_match_table = bcm2835aux_serial_match, + .acpi_match_table = bcm2835aux_serial_acpi_match, }, .probe = bcm2835aux_serial_probe, .remove = bcm2835aux_serial_remove, diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index 890fa7ddaa7f..b3c3f7e5851a 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -64,10 +64,19 @@ int serial8250_tx_dma(struct uart_8250_port *p) struct uart_8250_dma *dma = p->dma; struct circ_buf *xmit = &p->port.state->xmit; struct dma_async_tx_descriptor *desc; + struct uart_port *up = &p->port; int ret; - if (dma->tx_running) + if (dma->tx_running) { + if (up->x_char) { + dmaengine_pause(dma->txchan); + uart_xchar_out(up, UART_TX); + dmaengine_resume(dma->txchan); + } return 0; + } else if (up->x_char) { + uart_xchar_out(up, UART_TX); + } if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) { /* We have been called from __dma_tx_complete() */ diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index c171ce6db691..e52585064565 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -86,7 +86,7 @@ static void serial8250_early_out(struct uart_port *port, int offset, int value) #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -static void serial_putc(struct uart_port *port, int c) +static void serial_putc(struct uart_port *port, unsigned char c) { unsigned int status; diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index d502240bbcf2..7292917ac878 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -623,7 +623,12 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) maxnr = pci_resource_len(pcidev, bar) >> (board->reg_shift + 3); - nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f; + if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO) + nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1); + else if (board->num_ports) + nr_ports = board->num_ports; + else + nr_ports = pcidev->device & 0x0f; priv = devm_kzalloc(&pcidev->dev, struct_size(priv, line, nr_ports), GFP_KERNEL); if (!priv) @@ -722,22 +727,6 @@ static int __maybe_unused exar_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume); -static const struct exar8250_board acces_com_2x = { - .num_ports = 2, - .setup = pci_xr17c154_setup, -}; - -static const struct exar8250_board acces_com_4x = { - .num_ports = 4, - .setup = pci_xr17c154_setup, -}; - -static const struct exar8250_board acces_com_8x = { - .num_ports = 8, - .setup = pci_xr17c154_setup, -}; - - static const struct exar8250_board pbn_fastcom335_2 = { .num_ports = 2, .setup = pci_fastcom335_setup, @@ -822,13 +811,13 @@ static const struct exar8250_board pbn_exar_XR17V8358 = { } static const struct pci_device_id exar_pci_tbl[] = { - EXAR_DEVICE(ACCESSIO, COM_2S, acces_com_2x), - EXAR_DEVICE(ACCESSIO, COM_4S, acces_com_4x), - EXAR_DEVICE(ACCESSIO, COM_8S, acces_com_8x), - EXAR_DEVICE(ACCESSIO, COM232_8, acces_com_8x), - EXAR_DEVICE(ACCESSIO, COM_2SM, acces_com_2x), - EXAR_DEVICE(ACCESSIO, COM_4SM, acces_com_4x), - EXAR_DEVICE(ACCESSIO, COM_8SM, acces_com_8x), + EXAR_DEVICE(ACCESSIO, COM_2S, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_4S, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_8S, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM232_8, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_2SM, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_4SM, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_8SM, pbn_exar_XR17C15x), CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect), CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect), diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 65402d05eff9..cff91aa03f29 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -52,7 +52,7 @@ static void early_out(struct uart_port *port, int offset, uint8_t value) writel(value, port->membase + (offset << 2)); } -static void ingenic_early_console_putc(struct uart_port *port, int c) +static void ingenic_early_console_putc(struct uart_port *port, unsigned char c) { uint8_t lsr; diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index d3bafec7619d..0f5af061e0b4 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -117,8 +117,7 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port) { struct dw_dma_slave *param = &lpss->dma_param; struct pci_dev *pdev = to_pci_dev(port->dev); - unsigned int dma_devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); - struct pci_dev *dma_dev = pci_get_slot(pdev->bus, dma_devfn); + struct pci_dev *dma_dev; switch (pdev->device) { case PCI_DEVICE_ID_INTEL_BYT_UART1: @@ -137,6 +136,8 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port) return -EINVAL; } + dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + param->dma_dev = &dma_dev->dev; param->m_master = 0; param->p_master = 1; @@ -152,6 +153,14 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port) return 0; } +static void byt_serial_exit(struct lpss8250 *lpss) +{ + struct dw_dma_slave *param = &lpss->dma_param; + + /* Paired with pci_get_slot() in the byt_serial_setup() above */ + put_device(param->dma_dev); +} + static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port) { struct uart_8250_dma *dma = &lpss->data.dma; @@ -170,6 +179,13 @@ static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port) return 0; } +static void ehl_serial_exit(struct lpss8250 *lpss) +{ + struct uart_8250_port *up = serial8250_get_port(lpss->data.line); + + up->dma = NULL; +} + #ifdef CONFIG_SERIAL_8250_DMA static const struct dw_dma_platform_data qrk_serial_dma_pdata = { .nr_channels = 2, @@ -344,8 +360,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) return 0; err_exit: - if (lpss->board->exit) - lpss->board->exit(lpss); + lpss->board->exit(lpss); pci_free_irq_vectors(pdev); return ret; } @@ -356,8 +371,7 @@ static void lpss8250_remove(struct pci_dev *pdev) serial8250_unregister_port(lpss->data.line); - if (lpss->board->exit) - lpss->board->exit(lpss); + lpss->board->exit(lpss); pci_free_irq_vectors(pdev); } @@ -365,12 +379,14 @@ static const struct lpss8250_board byt_board = { .freq = 100000000, .base_baud = 2764800, .setup = byt_serial_setup, + .exit = byt_serial_exit, }; static const struct lpss8250_board ehl_board = { .freq = 200000000, .base_baud = 12500000, .setup = ehl_serial_setup, + .exit = ehl_serial_exit, }; static const struct lpss8250_board qrk_board = { diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c index efa0515139f8..a2a03acb04ad 100644 --- a/drivers/tty/serial/8250/8250_mid.c +++ b/drivers/tty/serial/8250/8250_mid.c @@ -73,6 +73,11 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p) return 0; } +static void pnw_exit(struct mid8250 *mid) +{ + pci_dev_put(mid->dma_dev); +} + static int tng_handle_irq(struct uart_port *p) { struct mid8250 *mid = p->private_data; @@ -124,6 +129,11 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p) return 0; } +static void tng_exit(struct mid8250 *mid) +{ + pci_dev_put(mid->dma_dev); +} + static int dnv_handle_irq(struct uart_port *p) { struct mid8250 *mid = p->private_data; @@ -312,11 +322,9 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (!uart.port.membase) return -ENOMEM; - if (mid->board->setup) { - ret = mid->board->setup(mid, &uart.port); - if (ret) - return ret; - } + ret = mid->board->setup(mid, &uart.port); + if (ret) + return ret; ret = mid8250_dma_setup(mid, &uart); if (ret) @@ -330,9 +338,9 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, mid); return 0; + err: - if (mid->board->exit) - mid->board->exit(mid); + mid->board->exit(mid); return ret; } @@ -342,8 +350,7 @@ static void mid8250_remove(struct pci_dev *pdev) serial8250_unregister_port(mid->line); - if (mid->board->exit) - mid->board->exit(mid); + mid->board->exit(mid); } static const struct mid8250_board pnw_board = { @@ -351,6 +358,7 @@ static const struct mid8250_board pnw_board = { .freq = 50000000, .base_baud = 115200, .setup = pnw_setup, + .exit = pnw_exit, }; static const struct mid8250_board tng_board = { @@ -358,6 +366,7 @@ static const struct mid8250_board tng_board = { .freq = 38400000, .base_baud = 1843200, .setup = tng_setup, + .exit = tng_exit, }; static const struct mid8250_board dnv_board = { @@ -368,16 +377,14 @@ static const struct mid8250_board dnv_board = { .exit = dnv_exit, }; -#define MID_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board } - static const struct pci_device_id pci_ids[] = { - MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART1, pnw_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_CDF_UART, dnv_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board), - { }, + { PCI_DEVICE_DATA(INTEL, PNW_UART1, &pnw_board) }, + { PCI_DEVICE_DATA(INTEL, PNW_UART2, &pnw_board) }, + { PCI_DEVICE_DATA(INTEL, PNW_UART3, &pnw_board) }, + { PCI_DEVICE_DATA(INTEL, TNG_UART, &tng_board) }, + { PCI_DEVICE_DATA(INTEL, CDF_UART, &dnv_board) }, + { PCI_DEVICE_DATA(INTEL, DNV_UART, &dnv_board) }, + { } }; MODULE_DEVICE_TABLE(pci, pci_ids); diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index fb65dc601b23..f4a0caa56f84 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -289,10 +289,10 @@ static void mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - unsigned short fraction_L_mapping[] = { + static const unsigned short fraction_L_mapping[] = { 0, 1, 0x5, 0x15, 0x55, 0x57, 0x57, 0x77, 0x7F, 0xFF, 0xFF }; - unsigned short fraction_M_mapping[] = { + static const unsigned short fraction_M_mapping[] = { 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 3 }; struct uart_8250_port *up = up_to_u8250p(port); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 73e5f1dbd075..ac8bfa042391 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -357,21 +357,7 @@ static void omap_8250_set_termios(struct uart_port *port, unsigned char cval = 0; unsigned int baud; - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } + cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag)); if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 3b12bfc1ed67..318af6f13605 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -307,6 +307,14 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 32, 64, 112}, .flags = UART_CAP_FIFO | UART_CAP_SLEEP, }, + [PORT_ASPEED_VUART] = { + .name = "ASPEED VUART", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ @@ -1615,6 +1623,18 @@ static inline void start_tx_rs485(struct uart_port *port) struct uart_8250_port *up = up_to_u8250p(port); struct uart_8250_em485 *em485 = up->em485; + /* + * While serial8250_em485_handle_stop_tx() is a noop if + * em485->active_timer != &em485->stop_tx_timer, it might happen that + * the timer is still armed and triggers only after the current bunch of + * chars is send and em485->active_timer == &em485->stop_tx_timer again. + * So cancel the timer. There is still a theoretical race condition if + * the timer is already running and only comes around to check for + * em485->active_timer when &em485->stop_tx_timer is armed again. + */ + if (em485->active_timer == &em485->stop_tx_timer) + hrtimer_try_to_cancel(&em485->stop_tx_timer); + em485->active_timer = NULL; if (em485->tx_stopped) { @@ -1657,6 +1677,9 @@ static void serial8250_start_tx(struct uart_port *port) serial8250_rpm_get_tx(up); + if (!port->x_char && uart_circ_empty(&port->state->xmit)) + return; + if (em485 && em485->active_timer == &em485->start_tx_timer) return; @@ -1799,9 +1822,7 @@ void serial8250_tx_chars(struct uart_8250_port *up) int count; if (port->x_char) { - serial_out(up, UART_TX, port->x_char); - port->icount.tx++; - port->x_char = 0; + uart_xchar_out(port, UART_TX); return; } if (uart_tx_stopped(port)) { @@ -2582,21 +2603,7 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, { unsigned char cval; - switch (c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } + cval = UART_LCR_WLEN(tty_get_char_size(c_cflag)); if (c_cflag & CSTOPB) cval |= UART_LCR_STOP; @@ -3296,7 +3303,7 @@ EXPORT_SYMBOL_GPL(serial8250_set_defaults); #ifdef CONFIG_SERIAL_8250_CONSOLE -static void serial8250_console_putchar(struct uart_port *port, int ch) +static void serial8250_console_putchar(struct uart_port *port, unsigned char ch) { struct uart_8250_port *up = up_to_u8250p(port); diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c index e13ae18b0713..e7cddeec9d8e 100644 --- a/drivers/tty/serial/8250/8250_tegra.c +++ b/drivers/tty/serial/8250/8250_tegra.c @@ -175,7 +175,7 @@ static const struct of_device_id tegra_uart_of_match[] = { }; MODULE_DEVICE_TABLE(of, tegra_uart_of_match); -static const struct acpi_device_id tegra_uart_acpi_match[] = { +static const struct acpi_device_id tegra_uart_acpi_match[] __maybe_unused = { { "NVDA0100", 0 }, { }, }; diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 9d415a38cc71..cd93ea6eed65 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -479,11 +479,12 @@ config SERIAL_8250_LPSS select DW_DMAC_PCI if (SERIAL_8250_DMA && X86_INTEL_LPSS) select RATIONAL help - Selecting this option will enable handling of the extra features - present on the UART found on various Intel platforms such as: + Selecting this option will enable handling of the UART found on + various Intel platforms such as: - Intel Baytrail SoC - Intel Braswell SoC - Intel Quark X1000 SoC + that are not covered by the more generic SERIAL_8250_PCI option. config SERIAL_8250_MID tristate "Support for serial ports on Intel MID platforms" @@ -494,17 +495,18 @@ config SERIAL_8250_MID select HSU_DMA_PCI if (HSU_DMA && X86_INTEL_MID) select RATIONAL help - Selecting this option will enable handling of the extra features - present on the UART found on Intel Medfield SOC and various other - Intel platforms. + Selecting this option will enable handling of the UART found on + Intel Medfield SOC and various other Intel platforms that is not + covered by the more generic SERIAL_8250_PCI option. config SERIAL_8250_PERICOM tristate "Support for Pericom and Acces I/O serial ports" default SERIAL_8250 depends on SERIAL_8250 && PCI help - Selecting this option will enable handling of the extra features - present on the Pericom and Acces I/O UARTs. + Selecting this option will enable handling of the Pericom and Acces + I/O UARTs that are not covered by the more generic SERIAL_8250_PCI + option. config SERIAL_8250_PXA tristate "PXA serial port support" diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 0e5ccb25bdb1..6949e883ffab 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -139,6 +139,7 @@ config SERIAL_ATMEL_CONSOLE bool "Support for console on AT91 serial port" depends on SERIAL_ATMEL=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON help Say Y here if you wish to use an on-chip UART on a Atmel AT91 processor as the system console (the system @@ -236,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || ARCH_ARTPEC || COMPILE_TEST select SERIAL_CORE help Support for the on-chip UARTs on the Samsung @@ -1099,7 +1100,8 @@ config SERIAL_TIMBERDALE config SERIAL_BCM63XX tristate "Broadcom BCM63xx/BCM33xx UART support" select SERIAL_CORE - depends on COMMON_CLK + depends on ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST + default ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC help This enables the driver for the onchip UART core found on the following chipsets: @@ -1445,6 +1447,7 @@ config SERIAL_STM32_CONSOLE config SERIAL_MVEBU_UART bool "Marvell EBU serial port support" depends on ARCH_MVEBU || COMPILE_TEST + depends on COMMON_CLK select SERIAL_CORE help This driver is for Marvell EBU SoC's UART. If you have a machine @@ -1562,6 +1565,31 @@ config SERIAL_LITEUART_CONSOLE and warnings and which allows logins in single user mode). Otherwise, say 'N'. +config SERIAL_SUNPLUS + tristate "Sunplus UART support" + depends on ARCH_SUNPLUS || COMPILE_TEST + select SERIAL_CORE + help + Select this option if you would like to use Sunplus serial port on + Sunplus SoC SP7021. + If you enable this option, Sunplus serial ports in the system will + be registered as ttySUPx. + This driver can also be built as a module. If so, the module will be + called sunplus-uart. + +config SERIAL_SUNPLUS_CONSOLE + bool "Console on Sunplus UART" + depends on SERIAL_SUNPLUS + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Select this option if you would like to use a Sunplus UART as the + system console. + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySUPx". + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 7da0856cd198..61cc8de95571 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -87,6 +87,7 @@ obj-$(CONFIG_SERIAL_RDA) += rda-uart.o obj-$(CONFIG_SERIAL_MILBEAUT_USIO) += milbeaut_usio.o obj-$(CONFIG_SERIAL_SIFIVE) += sifive.o obj-$(CONFIG_SERIAL_LITEUART) += liteuart.o +obj-$(CONFIG_SERIAL_SUNPLUS) += sunplus-uart.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 37bffe406b18..1c16345d0a1f 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -298,7 +298,7 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE) #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) -static void altera_jtaguart_console_putc(struct uart_port *port, int c) +static void altera_jtaguart_console_putc(struct uart_port *port, unsigned char c) { unsigned long status; unsigned long flags; @@ -318,7 +318,7 @@ static void altera_jtaguart_console_putc(struct uart_port *port, int c) spin_unlock_irqrestore(&port->lock, flags); } #else -static void altera_jtaguart_console_putc(struct uart_port *port, int c) +static void altera_jtaguart_console_putc(struct uart_port *port, unsigned char c) { unsigned long flags; diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 64a352b40197..8b749ed557c6 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -438,7 +438,7 @@ static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS]; #if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE) -static void altera_uart_console_putc(struct uart_port *port, int c) +static void altera_uart_console_putc(struct uart_port *port, unsigned char c) { while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & ALTERA_UART_STATUS_TRDY_MSK)) diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index 47654073123d..fae0b581ff42 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -110,38 +110,38 @@ static void pl010_enable_ms(struct uart_port *port) writel(cr, uap->port.membase + UART010_CR); } -static void pl010_rx_chars(struct uart_amba_port *uap) +static void pl010_rx_chars(struct uart_port *port) { unsigned int status, ch, flag, rsr, max_count = 256; - status = readb(uap->port.membase + UART01x_FR); + status = readb(port->membase + UART01x_FR); while (UART_RX_DATA(status) && max_count--) { - ch = readb(uap->port.membase + UART01x_DR); + ch = readb(port->membase + UART01x_DR); flag = TTY_NORMAL; - uap->port.icount.rx++; + port->icount.rx++; /* * Note that the error handling code is * out of the main execution path */ - rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + rsr = readb(port->membase + UART01x_RSR) | UART_DUMMY_RSR_RX; if (unlikely(rsr & UART01x_RSR_ANY)) { - writel(0, uap->port.membase + UART01x_ECR); + writel(0, port->membase + UART01x_ECR); if (rsr & UART01x_RSR_BE) { rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); - uap->port.icount.brk++; - if (uart_handle_break(&uap->port)) + port->icount.brk++; + if (uart_handle_break(port)) goto ignore_char; } else if (rsr & UART01x_RSR_PE) - uap->port.icount.parity++; + port->icount.parity++; else if (rsr & UART01x_RSR_FE) - uap->port.icount.frame++; + port->icount.frame++; if (rsr & UART01x_RSR_OE) - uap->port.icount.overrun++; + port->icount.overrun++; - rsr &= uap->port.read_status_mask; + rsr &= port->read_status_mask; if (rsr & UART01x_RSR_BE) flag = TTY_BREAK; @@ -151,56 +151,57 @@ static void pl010_rx_chars(struct uart_amba_port *uap) flag = TTY_FRAME; } - if (uart_handle_sysrq_char(&uap->port, ch)) + if (uart_handle_sysrq_char(port, ch)) goto ignore_char; - uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag); ignore_char: - status = readb(uap->port.membase + UART01x_FR); + status = readb(port->membase + UART01x_FR); } - tty_flip_buffer_push(&uap->port.state->port); + tty_flip_buffer_push(&port->state->port); } -static void pl010_tx_chars(struct uart_amba_port *uap) +static void pl010_tx_chars(struct uart_port *port) { - struct circ_buf *xmit = &uap->port.state->xmit; + struct circ_buf *xmit = &port->state->xmit; int count; - if (uap->port.x_char) { - writel(uap->port.x_char, uap->port.membase + UART01x_DR); - uap->port.icount.tx++; - uap->port.x_char = 0; + if (port->x_char) { + writel(port->x_char, port->membase + UART01x_DR); + port->icount.tx++; + port->x_char = 0; return; } - if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { - pl010_stop_tx(&uap->port); + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + pl010_stop_tx(port); return; } - count = uap->port.fifosize >> 1; + count = port->fifosize >> 1; do { - writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + writel(xmit->buf[xmit->tail], port->membase + UART01x_DR); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx++; + port->icount.tx++; if (uart_circ_empty(xmit)) break; } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); + uart_write_wakeup(port); if (uart_circ_empty(xmit)) - pl010_stop_tx(&uap->port); + pl010_stop_tx(port); } static void pl010_modem_status(struct uart_amba_port *uap) { + struct uart_port *port = &uap->port; unsigned int status, delta; - writel(0, uap->port.membase + UART010_ICR); + writel(0, port->membase + UART010_ICR); - status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + status = readb(port->membase + UART01x_FR) & UART01x_FR_MODEM_ANY; delta = status ^ uap->old_status; uap->old_status = status; @@ -209,65 +210,63 @@ static void pl010_modem_status(struct uart_amba_port *uap) return; if (delta & UART01x_FR_DCD) - uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + uart_handle_dcd_change(port, status & UART01x_FR_DCD); if (delta & UART01x_FR_DSR) - uap->port.icount.dsr++; + port->icount.dsr++; if (delta & UART01x_FR_CTS) - uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + uart_handle_cts_change(port, status & UART01x_FR_CTS); - wake_up_interruptible(&uap->port.state->port.delta_msr_wait); + wake_up_interruptible(&port->state->port.delta_msr_wait); } static irqreturn_t pl010_int(int irq, void *dev_id) { struct uart_amba_port *uap = dev_id; + struct uart_port *port = &uap->port; unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; int handled = 0; - spin_lock(&uap->port.lock); + spin_lock(&port->lock); - status = readb(uap->port.membase + UART010_IIR); + status = readb(port->membase + UART010_IIR); if (status) { do { if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) - pl010_rx_chars(uap); + pl010_rx_chars(port); if (status & UART010_IIR_MIS) pl010_modem_status(uap); if (status & UART010_IIR_TIS) - pl010_tx_chars(uap); + pl010_tx_chars(port); if (pass_counter-- == 0) break; - status = readb(uap->port.membase + UART010_IIR); + status = readb(port->membase + UART010_IIR); } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | UART010_IIR_TIS)); handled = 1; } - spin_unlock(&uap->port.lock); + spin_unlock(&port->lock); return IRQ_RETVAL(handled); } static unsigned int pl010_tx_empty(struct uart_port *port) { - struct uart_amba_port *uap = - container_of(port, struct uart_amba_port, port); - unsigned int status = readb(uap->port.membase + UART01x_FR); + unsigned int status = readb(port->membase + UART01x_FR); + return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; } static unsigned int pl010_get_mctrl(struct uart_port *port) { - struct uart_amba_port *uap = - container_of(port, struct uart_amba_port, port); unsigned int result = 0; unsigned int status; - status = readb(uap->port.membase + UART01x_FR); + status = readb(port->membase + UART01x_FR); if (status & UART01x_FR_DCD) result |= TIOCM_CAR; if (status & UART01x_FR_DSR) @@ -284,24 +283,22 @@ static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl) container_of(port, struct uart_amba_port, port); if (uap->data) - uap->data->set_mctrl(uap->dev, uap->port.membase, mctrl); + uap->data->set_mctrl(uap->dev, port->membase, mctrl); } static void pl010_break_ctl(struct uart_port *port, int break_state) { - struct uart_amba_port *uap = - container_of(port, struct uart_amba_port, port); unsigned long flags; unsigned int lcr_h; - spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readb(uap->port.membase + UART010_LCRH); + spin_lock_irqsave(&port->lock, flags); + lcr_h = readb(port->membase + UART010_LCRH); if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else lcr_h &= ~UART01x_LCRH_BRK; - writel(lcr_h, uap->port.membase + UART010_LCRH); - spin_unlock_irqrestore(&uap->port.lock, flags); + writel(lcr_h, port->membase + UART010_LCRH); + spin_unlock_irqrestore(&port->lock, flags); } static int pl010_startup(struct uart_port *port) @@ -317,25 +314,25 @@ static int pl010_startup(struct uart_port *port) if (retval) goto out; - uap->port.uartclk = clk_get_rate(uap->clk); + port->uartclk = clk_get_rate(uap->clk); /* * Allocate the IRQ */ - retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap); + retval = request_irq(port->irq, pl010_int, 0, "uart-pl010", uap); if (retval) goto clk_dis; /* * initialise the old status of the modem signals */ - uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + uap->old_status = readb(port->membase + UART01x_FR) & UART01x_FR_MODEM_ANY; /* * Finally, enable interrupts */ writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, - uap->port.membase + UART010_CR); + port->membase + UART010_CR); return 0; @@ -353,17 +350,17 @@ static void pl010_shutdown(struct uart_port *port) /* * Free the interrupt */ - free_irq(uap->port.irq, uap); + free_irq(port->irq, uap); /* * disable all interrupts, disable the port */ - writel(0, uap->port.membase + UART010_CR); + writel(0, port->membase + UART010_CR); /* disable break condition and fifos */ - writel(readb(uap->port.membase + UART010_LCRH) & + writel(readb(port->membase + UART010_LCRH) & ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), - uap->port.membase + UART010_LCRH); + port->membase + UART010_LCRH); /* * Shut down the clock producer @@ -375,8 +372,6 @@ static void pl010_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct uart_amba_port *uap = - container_of(port, struct uart_amba_port, port); unsigned int lcr_h, old_cr; unsigned long flags; unsigned int baud, quot; @@ -384,7 +379,7 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios, /* * Ask the core to calculate the divisor for us. */ - baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); quot = uart_get_divisor(port, baud); switch (termios->c_cflag & CSIZE) { @@ -408,63 +403,63 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios, if (!(termios->c_cflag & PARODD)) lcr_h |= UART01x_LCRH_EPS; } - if (uap->port.fifosize > 1) + if (port->fifosize > 1) lcr_h |= UART01x_LCRH_FEN; - spin_lock_irqsave(&uap->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); /* * Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); - uap->port.read_status_mask = UART01x_RSR_OE; + port->read_status_mask = UART01x_RSR_OE; if (termios->c_iflag & INPCK) - uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - uap->port.read_status_mask |= UART01x_RSR_BE; + port->read_status_mask |= UART01x_RSR_BE; /* * Characters to ignore */ - uap->port.ignore_status_mask = 0; + port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) - uap->port.ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; if (termios->c_iflag & IGNBRK) { - uap->port.ignore_status_mask |= UART01x_RSR_BE; + port->ignore_status_mask |= UART01x_RSR_BE; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) - uap->port.ignore_status_mask |= UART01x_RSR_OE; + port->ignore_status_mask |= UART01x_RSR_OE; } /* * Ignore all characters if CREAD is not set. */ if ((termios->c_cflag & CREAD) == 0) - uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; + port->ignore_status_mask |= UART_DUMMY_RSR_RX; - old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; + old_cr = readb(port->membase + UART010_CR) & ~UART010_CR_MSIE; if (UART_ENABLE_MS(port, termios->c_cflag)) old_cr |= UART010_CR_MSIE; /* Set baud rate */ quot -= 1; - writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); - writel(quot & 0xff, uap->port.membase + UART010_LCRL); + writel((quot & 0xf00) >> 8, port->membase + UART010_LCRM); + writel(quot & 0xff, port->membase + UART010_LCRL); /* * ----------v----------v----------v----------v----- * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L * ----------^----------^----------^----------^----- */ - writel(lcr_h, uap->port.membase + UART010_LCRH); - writel(old_cr, uap->port.membase + UART010_CR); + writel(lcr_h, port->membase + UART010_LCRH); + writel(old_cr, port->membase + UART010_CR); - spin_unlock_irqrestore(&uap->port.lock, flags); + spin_unlock_irqrestore(&port->lock, flags); } static void pl010_set_ldisc(struct uart_port *port, struct ktermios *termios) @@ -556,23 +551,22 @@ static struct uart_amba_port *amba_ports[UART_NR]; #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE -static void pl010_console_putchar(struct uart_port *port, int ch) +static void pl010_console_putchar(struct uart_port *port, unsigned char ch) { - struct uart_amba_port *uap = - container_of(port, struct uart_amba_port, port); unsigned int status; do { - status = readb(uap->port.membase + UART01x_FR); + status = readb(port->membase + UART01x_FR); barrier(); } while (!UART_TX_READY(status)); - writel(ch, uap->port.membase + UART01x_DR); + writel(ch, port->membase + UART01x_DR); } static void pl010_console_write(struct console *co, const char *s, unsigned int count) { struct uart_amba_port *uap = amba_ports[co->index]; + struct uart_port *port = &uap->port; unsigned int status, old_cr; clk_enable(uap->clk); @@ -580,20 +574,20 @@ pl010_console_write(struct console *co, const char *s, unsigned int count) /* * First save the CR then disable the interrupts */ - old_cr = readb(uap->port.membase + UART010_CR); - writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); + old_cr = readb(port->membase + UART010_CR); + writel(UART01x_CR_UARTEN, port->membase + UART010_CR); - uart_console_write(&uap->port, s, count, pl010_console_putchar); + uart_console_write(port, s, count, pl010_console_putchar); /* * Finally, wait for transmitter to become empty * and restore the TCR */ do { - status = readb(uap->port.membase + UART01x_FR); + status = readb(port->membase + UART01x_FR); barrier(); } while (status & UART01x_FR_BUSY); - writel(old_cr, uap->port.membase + UART010_CR); + writel(old_cr, port->membase + UART010_CR); clk_disable(uap->clk); } diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index ba053a68529f..51ecb050ae40 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2255,7 +2255,7 @@ static struct uart_amba_port *amba_ports[UART_NR]; #ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE -static void pl011_console_putchar(struct uart_port *port, int ch) +static void pl011_console_putchar(struct uart_port *port, unsigned char ch) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); @@ -2471,7 +2471,7 @@ static struct console amba_console = { #define AMBA_CONSOLE (&amba_console) -static void qdf2400_e44_putc(struct uart_port *port, int c) +static void qdf2400_e44_putc(struct uart_port *port, unsigned char c) { while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) cpu_relax(); @@ -2487,7 +2487,7 @@ static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned uart_console_write(&dev->port, s, n, qdf2400_e44_putc); } -static void pl011_putc(struct uart_port *port, int c) +static void pl011_putc(struct uart_port *port, unsigned char c) { while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) cpu_relax(); diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index d8c937bdf3f9..9ef82d870ff2 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -413,7 +413,7 @@ static void apbuart_flush_fifo(struct uart_port *port) #ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE -static void apbuart_console_putchar(struct uart_port *port, int ch) +static void apbuart_console_putchar(struct uart_port *port, unsigned char ch) { unsigned int status; do { diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 8cabe50c4a33..6269dbf93546 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -613,7 +613,7 @@ static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up) } while ((status & AR933X_UART_DATA_TX_CSR) == 0); } -static void ar933x_uart_console_putchar(struct uart_port *port, int ch) +static void ar933x_uart_console_putchar(struct uart_port *port, unsigned char ch) { struct ar933x_uart_port *up = container_of(port, struct ar933x_uart_port, port); diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 596217d10d5c..2a09e92ef9ed 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -508,7 +508,7 @@ static int arc_serial_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -static void arc_serial_console_putchar(struct uart_port *port, int ch) +static void arc_serial_console_putchar(struct uart_port *port, unsigned char ch) { while (!(UART_GET_STATUS(port) & TXEMPTY)) cpu_relax(); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index c370eddc651b..3a45e4fc7993 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -8,6 +8,7 @@ * * DMA support added by Chip Coldwell. */ +#include <linux/circ_buf.h> #include <linux/tty.h> #include <linux/ioport.h> #include <linux/slab.h> @@ -2540,7 +2541,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, } #ifdef CONFIG_SERIAL_ATMEL_CONSOLE -static void atmel_console_putchar(struct uart_port *port, int ch) +static void atmel_console_putchar(struct uart_port *port, unsigned char ch) { while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY)) cpu_relax(); @@ -2672,6 +2673,30 @@ static struct console atmel_console = { .data = &atmel_uart, }; +static void atmel_serial_early_write(struct console *con, const char *s, + unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, atmel_console_putchar); +} + +static int __init atmel_early_console_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = atmel_serial_early_write; + + return 0; +} + +OF_EARLYCON_DECLARE(atmel_serial, "atmel,at91rm9200-usart", + atmel_early_console_setup); +OF_EARLYCON_DECLARE(atmel_serial, "atmel,at91sam9260-usart", + atmel_early_console_setup); + #define ATMEL_CONSOLE_DEVICE (&atmel_console) #else diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 6471a54b616b..53b43174aa40 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -681,7 +681,7 @@ static void wait_for_xmitr(struct uart_port *port) /* * output given char */ -static void bcm_console_putchar(struct uart_port *port, int ch) +static void bcm_console_putchar(struct uart_port *port, unsigned char ch) { wait_for_xmitr(port); bcm_uart_writel(port, ch, UART_FIFO_REG); diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index 95abc6faa3d5..b9b66ad31a08 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -348,7 +348,7 @@ static const struct uart_ops uart_clps711x_ops = { }; #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE -static void uart_clps711x_console_putchar(struct uart_port *port, int ch) +static void uart_clps711x_console_putchar(struct uart_port *port, unsigned char ch) { struct clps711x_port *s = dev_get_drvdata(port->dev); u32 sysflg = 0; diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index 13ac36e2da4f..6d70fea76bb3 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -381,7 +381,7 @@ static const struct uart_ops digicolor_uart_ops = { .request_port = digicolor_uart_request_port, }; -static void digicolor_uart_console_putchar(struct uart_port *port, int ch) +static void digicolor_uart_console_putchar(struct uart_port *port, unsigned char ch) { while (digicolor_uart_tx_full(port)) cpu_relax(); diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c index e9edabc5a211..2e21acf39720 100644 --- a/drivers/tty/serial/dz.c +++ b/drivers/tty/serial/dz.c @@ -802,7 +802,7 @@ static void __init dz_init_ports(void) * restored. Welcome to the world of PDP-11! * ------------------------------------------------------------------- */ -static void dz_console_putchar(struct uart_port *uport, int ch) +static void dz_console_putchar(struct uart_port *uport, unsigned char ch) { struct dz_port *dport = to_dport(uport); unsigned long flags; diff --git a/drivers/tty/serial/earlycon-arm-semihost.c b/drivers/tty/serial/earlycon-arm-semihost.c index fa096c10b591..fcdec5f42376 100644 --- a/drivers/tty/serial/earlycon-arm-semihost.c +++ b/drivers/tty/serial/earlycon-arm-semihost.c @@ -21,7 +21,7 @@ /* * Semihosting-based debug console */ -static void smh_putc(struct uart_port *port, int c) +static void smh_putc(struct uart_port *port, unsigned char c) { #ifdef CONFIG_ARM64 asm volatile("mov x1, %0\n" diff --git a/drivers/tty/serial/earlycon-riscv-sbi.c b/drivers/tty/serial/earlycon-riscv-sbi.c index ce81523c3113..27afb0b74ea7 100644 --- a/drivers/tty/serial/earlycon-riscv-sbi.c +++ b/drivers/tty/serial/earlycon-riscv-sbi.c @@ -10,7 +10,7 @@ #include <linux/serial_core.h> #include <asm/sbi.h> -static void sbi_putc(struct uart_port *port, int c) +static void sbi_putc(struct uart_port *port, unsigned char c) { sbi_console_putchar(c); } diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c index 283757264608..98bb0c315e13 100644 --- a/drivers/tty/serial/fsl_linflexuart.c +++ b/drivers/tty/serial/fsl_linflexuart.c @@ -157,27 +157,29 @@ static void linflex_stop_rx(struct uart_port *port) writel(ier & ~LINFLEXD_LINIER_DRIE, port->membase + LINIER); } -static inline void linflex_transmit_buffer(struct uart_port *sport) +static void linflex_put_char(struct uart_port *sport, unsigned char c) { - struct circ_buf *xmit = &sport->state->xmit; - unsigned char c; unsigned long status; - while (!uart_circ_empty(xmit)) { - c = xmit->buf[xmit->tail]; - writeb(c, sport->membase + BDRL); + writeb(c, sport->membase + BDRL); - /* Waiting for data transmission completed. */ - while (((status = readl(sport->membase + UARTSR)) & - LINFLEXD_UARTSR_DTFTFF) != - LINFLEXD_UARTSR_DTFTFF) - ; + /* Waiting for data transmission completed. */ + while (((status = readl(sport->membase + UARTSR)) & + LINFLEXD_UARTSR_DTFTFF) != + LINFLEXD_UARTSR_DTFTFF) + ; + + writel(status | LINFLEXD_UARTSR_DTFTFF, sport->membase + UARTSR); +} + +static inline void linflex_transmit_buffer(struct uart_port *sport) +{ + struct circ_buf *xmit = &sport->state->xmit; + while (!uart_circ_empty(xmit)) { + linflex_put_char(sport, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); sport->icount.tx++; - - writel(status | LINFLEXD_UARTSR_DTFTFF, - sport->membase + UARTSR); } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) @@ -201,21 +203,11 @@ static irqreturn_t linflex_txint(int irq, void *dev_id) struct uart_port *sport = dev_id; struct circ_buf *xmit = &sport->state->xmit; unsigned long flags; - unsigned long status; spin_lock_irqsave(&sport->lock, flags); if (sport->x_char) { - writeb(sport->x_char, sport->membase + BDRL); - - /* waiting for data transmission completed */ - while (((status = readl(sport->membase + UARTSR)) & - LINFLEXD_UARTSR_DTFTFF) != LINFLEXD_UARTSR_DTFTFF) - ; - - writel(status | LINFLEXD_UARTSR_DTFTFF, - sport->membase + UARTSR); - + linflex_put_char(sport, sport->x_char); goto out; } @@ -225,10 +217,6 @@ static irqreturn_t linflex_txint(int irq, void *dev_id) } linflex_transmit_buffer(sport); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(sport); - out: spin_unlock_irqrestore(&sport->lock, flags); return IRQ_HANDLED; @@ -565,7 +553,7 @@ static const struct uart_ops linflex_pops = { static struct uart_port *linflex_ports[UART_NR]; #ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE -static void linflex_console_putchar(struct uart_port *port, int ch) +static void linflex_console_putchar(struct uart_port *port, unsigned char ch) { unsigned long cr; @@ -590,7 +578,7 @@ static void linflex_console_putchar(struct uart_port *port, int ch) } } -static void linflex_earlycon_putchar(struct uart_port *port, int ch) +static void linflex_earlycon_putchar(struct uart_port *port, unsigned char ch) { unsigned long flags; char *ret; diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index ce3e26144689..87789872f400 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -931,7 +931,8 @@ static void lpuart_rxint(struct lpuart_port *sport) sport->port.sysrq = 0; } - tty_insert_flip_char(port, rx, flg); + if (tty_insert_flip_char(port, rx, flg) == 0) + sport->port.icount.buf_overrun++; } out: @@ -1024,7 +1025,8 @@ static void lpuart32_rxint(struct lpuart_port *sport) flg = TTY_OVERRUN; } - tty_insert_flip_char(port, rx, flg); + if (tty_insert_flip_char(port, rx, flg) == 0) + sport->port.icount.buf_overrun++; } out: @@ -1116,7 +1118,7 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport) struct dma_chan *chan = sport->dma_rx_chan; struct circ_buf *ring = &sport->rx_ring; unsigned long flags; - int count = 0; + int count = 0, copied; if (lpuart_is_32(sport)) { unsigned long sr = lpuart32_read(&sport->port, UARTSTAT); @@ -1218,20 +1220,24 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport) if (ring->head < ring->tail) { count = sport->rx_sgl.length - ring->tail; - tty_insert_flip_string(port, ring->buf + ring->tail, count); + copied = tty_insert_flip_string(port, ring->buf + ring->tail, count); + if (copied != count) + sport->port.icount.buf_overrun++; ring->tail = 0; - sport->port.icount.rx += count; + sport->port.icount.rx += copied; } /* Finally we read data from tail to head */ if (ring->tail < ring->head) { count = ring->head - ring->tail; - tty_insert_flip_string(port, ring->buf + ring->tail, count); + copied = tty_insert_flip_string(port, ring->buf + ring->tail, count); + if (copied != count) + sport->port.icount.buf_overrun++; /* Wrap ring->head if needed */ if (ring->head >= sport->rx_sgl.length) ring->head = 0; ring->tail = ring->head; - sport->port.icount.rx += count; + sport->port.icount.rx += copied; } exit: @@ -2327,13 +2333,13 @@ static const struct uart_ops lpuart32_pops = { static struct lpuart_port *lpuart_ports[UART_NR]; #ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE -static void lpuart_console_putchar(struct uart_port *port, int ch) +static void lpuart_console_putchar(struct uart_port *port, unsigned char ch) { lpuart_wait_bit_set(port, UARTSR1, UARTSR1_TDRE); writeb(ch, port->membase + UARTDR); } -static void lpuart32_console_putchar(struct uart_port *port, int ch) +static void lpuart32_console_putchar(struct uart_port *port, unsigned char ch) { lpuart32_wait_bit_set(port, UARTSTAT, UARTSTAT_TDRE); lpuart32_write(port, ch, UARTDATA); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index df8a0c8b8b29..fd38e6ed4fda 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -455,9 +455,14 @@ static void imx_uart_stop_tx(struct uart_port *port) if (port->rs485.flags & SER_RS485_ENABLED) { if (sport->tx_state == SEND) { sport->tx_state = WAIT_AFTER_SEND; - start_hrtimer_ms(&sport->trigger_stop_tx, + + if (port->rs485.delay_rts_after_send > 0) { + start_hrtimer_ms(&sport->trigger_stop_tx, port->rs485.delay_rts_after_send); - return; + return; + } + + /* continue without any delay */ } if (sport->tx_state == WAIT_AFTER_RTS || @@ -698,9 +703,14 @@ static void imx_uart_start_tx(struct uart_port *port) imx_uart_stop_rx(port); sport->tx_state = WAIT_AFTER_RTS; - start_hrtimer_ms(&sport->trigger_start_tx, + + if (port->rs485.delay_rts_before_send > 0) { + start_hrtimer_ms(&sport->trigger_start_tx, port->rs485.delay_rts_before_send); - return; + return; + } + + /* continue without any delay */ } if (sport->tx_state == WAIT_AFTER_SEND @@ -1258,7 +1268,7 @@ static void imx_uart_clear_rx_errors(struct imx_port *sport) } #define TXTL_DEFAULT 2 /* reset default */ -#define RXTL_DEFAULT 1 /* reset default */ +#define RXTL_DEFAULT 8 /* 8 characters or aging timer */ #define TXTL_DMA 8 /* DMA burst setting */ #define RXTL_DMA 9 /* DMA burst setting */ @@ -1958,7 +1968,7 @@ static const struct uart_ops imx_uart_pops = { static struct imx_port *imx_uart_ports[UART_NR]; #if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE) -static void imx_uart_console_putchar(struct uart_port *port, int ch) +static void imx_uart_console_putchar(struct uart_port *port, unsigned char ch) { struct imx_port *sport = (struct imx_port *)port; diff --git a/drivers/tty/serial/imx_earlycon.c b/drivers/tty/serial/imx_earlycon.c index 795606e1a22f..7aab38b2bd8c 100644 --- a/drivers/tty/serial/imx_earlycon.c +++ b/drivers/tty/serial/imx_earlycon.c @@ -16,7 +16,7 @@ #define UTS_TXFULL (1<<4) /* TxFIFO full */ #define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/ -static void imx_uart_console_early_putchar(struct uart_port *port, int ch) +static void imx_uart_console_early_putchar(struct uart_port *port, unsigned char ch) { while (readl_relaxed(port->membase + IMX21_UTS) & UTS_TXFULL) cpu_relax(); diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c index f4dc5fe4ba92..655e64b26852 100644 --- a/drivers/tty/serial/ip22zilog.c +++ b/drivers/tty/serial/ip22zilog.c @@ -990,7 +990,7 @@ static struct zilog_layout * __init get_zs(int chip) #define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ #ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE -static void ip22zilog_put_char(struct uart_port *port, int ch) +static void ip22zilog_put_char(struct uart_port *port, unsigned char ch) { struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); int loops = ZS_PUT_CHAR_MAX_DELAY; diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c index b507a2cec926..444f233ebd1f 100644 --- a/drivers/tty/serial/jsm/jsm_cls.c +++ b/drivers/tty/serial/jsm/jsm_cls.c @@ -350,7 +350,7 @@ static void cls_assert_modem_signals(struct jsm_channel *ch) static void cls_copy_data_from_uart_to_queue(struct jsm_channel *ch) { int qleft = 0; - u8 linestatus = 0; + u8 linestatus; u8 error_mask = 0; u16 head; u16 tail; @@ -365,8 +365,6 @@ static void cls_copy_data_from_uart_to_queue(struct jsm_channel *ch) head = ch->ch_r_head & RQUEUEMASK; tail = ch->ch_r_tail & RQUEUEMASK; - /* Get our cached LSR */ - linestatus = ch->ch_cached_lsr; ch->ch_cached_lsr = 0; /* Store how much space we have left in the queue */ @@ -737,21 +735,7 @@ static void cls_param(struct jsm_channel *ch) if (ch->ch_c_cflag & CSTOPB) lcr |= UART_LCR_STOP; - switch (ch->ch_c_cflag & CSIZE) { - case CS5: - lcr |= UART_LCR_WLEN5; - break; - case CS6: - lcr |= UART_LCR_WLEN6; - break; - case CS7: - lcr |= UART_LCR_WLEN7; - break; - case CS8: - default: - lcr |= UART_LCR_WLEN8; - break; - } + lcr |= UART_LCR_WLEN(tty_get_char_size(ch->ch_c_cflag)); ier = readb(&ch->ch_cls_uart->ier); uart_lcr = readb(&ch->ch_cls_uart->lcr); diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c index c6f927a76c3b..110696cdaa1d 100644 --- a/drivers/tty/serial/jsm/jsm_neo.c +++ b/drivers/tty/serial/jsm/jsm_neo.c @@ -291,7 +291,8 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch) ch->ch_cached_lsr = 0; /* Store how much space we have left in the queue */ - if ((qleft = tail - head - 1) < 0) + qleft = tail - head - 1; + if (qleft < 0) qleft += RQUEUEMASK + 1; /* @@ -1008,21 +1009,7 @@ static void neo_param(struct jsm_channel *ch) if (ch->ch_c_cflag & CSTOPB) lcr |= UART_LCR_STOP; - switch (ch->ch_c_cflag & CSIZE) { - case CS5: - lcr |= UART_LCR_WLEN5; - break; - case CS6: - lcr |= UART_LCR_WLEN6; - break; - case CS7: - lcr |= UART_LCR_WLEN7; - break; - case CS8: - default: - lcr |= UART_LCR_WLEN8; - break; - } + lcr |= UART_LCR_WLEN(tty_get_char_size(ch->ch_c_cflag)); ier = readb(&ch->ch_neo_uart->ier); uart_lcr = readb(&ch->ch_neo_uart->lcr); diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index d74cbbbf33c6..cb58bdec2f43 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -749,7 +749,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch) int qleft; /* Store how much space we have left in the queue */ - if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0) + qleft = ch->ch_r_tail - ch->ch_r_head - 1; + if (qleft < 0) qleft += RQUEUEMASK + 1; /* diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index 49d0c7f2b29b..79b7db8580e0 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -403,16 +403,16 @@ static int kgdboc_option_setup(char *opt) { if (!opt) { pr_err("config string not provided\n"); - return -EINVAL; + return 1; } if (strlen(opt) >= MAX_CONFIG_LEN) { pr_err("config string too long\n"); - return -ENOSPC; + return 1; } strcpy(config, opt); - return 0; + return 1; } __setup("kgdboc=", kgdboc_option_setup); diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 3e324d3f0a6d..a3120c3347dd 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -598,7 +598,7 @@ static const struct uart_ops lqasc_pops = { #ifdef CONFIG_SERIAL_LANTIQ_CONSOLE static void -lqasc_console_putchar(struct uart_port *port, int ch) +lqasc_console_putchar(struct uart_port *port, unsigned char ch) { int fifofree; diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c index 7f74bf7bdcff..328b50521f14 100644 --- a/drivers/tty/serial/liteuart.c +++ b/drivers/tty/serial/liteuart.c @@ -93,7 +93,7 @@ static void liteuart_timer(struct timer_list *t) mod_timer(&uart->timer, jiffies + uart_poll_timeout(port)); } -static void liteuart_putchar(struct uart_port *port, int ch) +static void liteuart_putchar(struct uart_port *port, unsigned char ch) { while (litex_read8(port->membase + OFF_TXFULL)) cpu_relax(); diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index 07c4161eb4cc..93140cac1ca1 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -122,7 +122,7 @@ static void wait_for_xmit_ready(struct uart_port *port) } } -static void lpc32xx_hsuart_console_putchar(struct uart_port *port, int ch) +static void lpc32xx_hsuart_console_putchar(struct uart_port *port, unsigned char ch) { wait_for_xmit_ready(port); writel((u32)ch, LPC32XX_HSUART_FIFO(port->membase)); @@ -276,10 +276,11 @@ static void __serial_lpc32xx_rx(struct uart_port *port) tty_flip_buffer_push(tport); } +static void serial_lpc32xx_stop_tx(struct uart_port *port); + static void __serial_lpc32xx_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; - unsigned int tmp; if (port->x_char) { writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase)); @@ -306,11 +307,8 @@ static void __serial_lpc32xx_tx(struct uart_port *port) uart_write_wakeup(port); exit_tx: - if (uart_circ_empty(xmit)) { - tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); - tmp &= ~LPC32XX_HSU_TX_INT_EN; - writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); - } + if (uart_circ_empty(xmit)) + serial_lpc32xx_stop_tx(port); } static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id) diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 516cff362434..0b5f21fbb53d 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -554,7 +554,6 @@ static void max3100_shutdown(struct uart_port *port) del_timer_sync(&s->timer); if (s->workqueue) { - flush_workqueue(s->workqueue); destroy_workqueue(s->workqueue); s->workqueue = NULL; } diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index c7cec7d03620..2aec62b5d6c4 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -338,7 +338,7 @@ static void mcf_tx_chars(struct mcf_uart *pp) } while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) { - if (xmit->head == xmit->tail) + if (uart_circ_empty(xmit)) break; writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); @@ -348,9 +348,8 @@ static void mcf_tx_chars(struct mcf_uart *pp) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (xmit->head == xmit->tail) { - pp->imr &= ~MCFUART_UIR_TXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); + if (uart_circ_empty(xmit)) { + mcf_stop_tx(port); /* Disable TX to negate RTS automatically */ if (port->rs485.flags & SER_RS485_ENABLED) writeb(MCFUART_UCR_TXDISABLE, diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 45e00d928253..2bf1c57e0981 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -513,7 +513,7 @@ static void meson_uart_enable_tx_engine(struct uart_port *port) writel(val, port->membase + AML_UART_CONTROL); } -static void meson_console_putchar(struct uart_port *port, int ch) +static void meson_console_putchar(struct uart_port *port, unsigned char ch) { if (!port->membase) return; diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c index 8f2cab7f66ad..347088bb380e 100644 --- a/drivers/tty/serial/milbeaut_usio.c +++ b/drivers/tty/serial/milbeaut_usio.c @@ -400,7 +400,7 @@ static const struct uart_ops mlb_usio_ops = { #ifdef CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE -static void mlb_usio_console_putchar(struct uart_port *port, int c) +static void mlb_usio_console_putchar(struct uart_port *port, unsigned char c) { while (!(readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TDRE)) cpu_relax(); diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 2704dc988e4a..8a6958377764 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -83,11 +83,11 @@ static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port); struct psc_ops { void (*fifo_init)(struct uart_port *port); - int (*raw_rx_rdy)(struct uart_port *port); - int (*raw_tx_rdy)(struct uart_port *port); - int (*rx_rdy)(struct uart_port *port); - int (*tx_rdy)(struct uart_port *port); - int (*tx_empty)(struct uart_port *port); + unsigned int (*raw_rx_rdy)(struct uart_port *port); + unsigned int (*raw_tx_rdy)(struct uart_port *port); + unsigned int (*rx_rdy)(struct uart_port *port); + unsigned int (*tx_rdy)(struct uart_port *port); + unsigned int (*tx_empty)(struct uart_port *port); void (*stop_rx)(struct uart_port *port); void (*start_tx)(struct uart_port *port); void (*stop_tx)(struct uart_port *port); @@ -203,34 +203,34 @@ static void mpc52xx_psc_fifo_init(struct uart_port *port) out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); } -static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port) +static unsigned int mpc52xx_psc_raw_rx_rdy(struct uart_port *port) { return in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY; } -static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) +static unsigned int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) { return in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXRDY; } -static int mpc52xx_psc_rx_rdy(struct uart_port *port) +static unsigned int mpc52xx_psc_rx_rdy(struct uart_port *port) { return in_be16(&PSC(port)->mpc52xx_psc_isr) & port->read_status_mask & MPC52xx_PSC_IMR_RXRDY; } -static int mpc52xx_psc_tx_rdy(struct uart_port *port) +static unsigned int mpc52xx_psc_tx_rdy(struct uart_port *port) { return in_be16(&PSC(port)->mpc52xx_psc_isr) & port->read_status_mask & MPC52xx_PSC_IMR_TXRDY; } -static int mpc52xx_psc_tx_empty(struct uart_port *port) +static unsigned int mpc52xx_psc_tx_empty(struct uart_port *port) { u16 sts = in_be16(&PSC(port)->mpc52xx_psc_status); @@ -1365,7 +1365,7 @@ static const struct uart_ops mpc52xx_uart_ops = { /* Interrupt handling */ /* ======================================================================== */ -static inline int +static inline unsigned int mpc52xx_uart_int_rx_chars(struct uart_port *port) { struct tty_port *tport = &port->state->port; diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c index 587b42f754cb..5e9429dcc51f 100644 --- a/drivers/tty/serial/mps2-uart.c +++ b/drivers/tty/serial/mps2-uart.c @@ -432,7 +432,7 @@ static const struct uart_ops mps2_uart_pops = { static DEFINE_IDR(ports_idr); #ifdef CONFIG_SERIAL_MPS2_UART_CONSOLE -static void mps2_uart_console_putchar(struct uart_port *port, int ch) +static void mps2_uart_console_putchar(struct uart_port *port, unsigned char ch) { while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL) cpu_relax(); @@ -484,7 +484,7 @@ static struct console mps2_uart_console = { #define MPS2_SERIAL_CONSOLE (&mps2_uart_console) -static void mps2_early_putchar(struct uart_port *port, int ch) +static void mps2_early_putchar(struct uart_port *port, unsigned char ch) { while (readb(port->membase + UARTn_STATE) & UARTn_STATE_TX_FULL) cpu_relax(); diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index ab226da75f7b..0429c2a54290 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -8,12 +8,14 @@ */ #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/console.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/init.h> #include <linux/io.h> #include <linux/iopoll.h> +#include <linux/math64.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> @@ -68,12 +70,36 @@ #define STAT_BRK_ERR (STAT_BRK_DET | STAT_FRM_ERR \ | STAT_PAR_ERR | STAT_OVR_ERR) +/* + * Marvell Armada 3700 Functional Specifications describes that bit 21 of UART + * Clock Control register controls UART1 and bit 20 controls UART2. But in + * reality bit 21 controls UART2 and bit 20 controls UART1. This seems to be an + * error in Marvell's documentation. Hence following CLK_DIS macros are swapped. + */ + #define UART_BRDV 0x10 +/* These bits are located in UART1 address space and control UART2 */ +#define UART2_CLK_DIS BIT(21) +/* These bits are located in UART1 address space and control UART1 */ +#define UART1_CLK_DIS BIT(20) +/* These bits are located in UART1 address space and control both UARTs */ +#define CLK_NO_XTAL BIT(19) +#define CLK_TBG_DIV1_SHIFT 15 +#define CLK_TBG_DIV1_MASK 0x7 +#define CLK_TBG_DIV1_MAX 6 +#define CLK_TBG_DIV2_SHIFT 12 +#define CLK_TBG_DIV2_MASK 0x7 +#define CLK_TBG_DIV2_MAX 6 +#define CLK_TBG_SEL_SHIFT 10 +#define CLK_TBG_SEL_MASK 0x3 +/* These bits are located in both UARTs address space */ #define BRDV_BAUD_MASK 0x3FF +#define BRDV_BAUD_MAX BRDV_BAUD_MASK #define UART_OSAMP 0x14 #define OSAMP_DEFAULT_DIVISOR 16 #define OSAMP_DIVISORS_MASK 0x3F3F3F3F +#define OSAMP_MAX_DIVISOR 63 #define MVEBU_NR_UARTS 2 @@ -153,6 +179,8 @@ static struct mvebu_uart *to_mvuart(struct uart_port *port) static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS]; +static DEFINE_SPINLOCK(mvebu_uart_lock); + /* Core UART Driver Operations */ static unsigned int mvebu_uart_tx_empty(struct uart_port *port) { @@ -445,31 +473,79 @@ static void mvebu_uart_shutdown(struct uart_port *port) static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) { unsigned int d_divisor, m_divisor; + unsigned long flags; u32 brdv, osamp; if (!port->uartclk) return -EOPNOTSUPP; /* - * The baudrate is derived from the UART clock thanks to two divisors: - * > D ("baud generator"): can divide the clock from 2 to 2^10 - 1. - * > M ("fractional divisor"): allows a better accuracy for - * baudrates higher than 230400. + * The baudrate is derived from the UART clock thanks to divisors: + * > d1 * d2 ("TBG divisors"): can divide only TBG clock from 1 to 6 + * > D ("baud generator"): can divide the clock from 1 to 1023 + * > M ("fractional divisor"): allows a better accuracy (from 1 to 63) + * + * Exact formulas for calculating baudrate: + * + * with default x16 scheme: + * baudrate = xtal / (d * 16) + * baudrate = tbg / (d1 * d2 * d * 16) + * + * with fractional divisor: + * baudrate = 10 * xtal / (d * (3 * (m1 + m2) + 2 * (m3 + m4))) + * baudrate = 10 * tbg / (d1*d2 * d * (3 * (m1 + m2) + 2 * (m3 + m4))) + * + * Oversampling value: + * osamp = (m1 << 0) | (m2 << 8) | (m3 << 16) | (m4 << 24); + * + * Where m1 controls number of clock cycles per bit for bits 1,2,3; + * m2 for bits 4,5,6; m3 for bits 7,8 and m4 for bits 9,10. + * + * To simplify baudrate setup set all the M prescalers to the same + * value. For baudrates 9600 Bd and higher, it is enough to use the + * default (x16) divisor or fractional divisor with M = 63, so there + * is no need to use real fractional support (where the M prescalers + * are not equal). + * + * When all the M prescalers are zeroed then default (x16) divisor is + * used. Default x16 scheme is more stable than M (fractional divisor), + * so use M only when D divisor is not enough to derive baudrate. * - * As the derivation of M is rather complicated, the code sticks to its - * default value (x16) when all the prescalers are zeroed, and only - * makes use of D to configure the desired baudrate. + * Member port->uartclk is either xtal clock rate or TBG clock rate + * divided by (d1 * d2). So d1 and d2 are already set by the UART clock + * driver (and UART driver itself cannot change them). Moreover they are + * shared between both UARTs. */ + m_divisor = OSAMP_DEFAULT_DIVISOR; d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor); + if (d_divisor > BRDV_BAUD_MAX) { + /* + * Experiments show that small M divisors are unstable. + * Use maximal possible M = 63 and calculate D divisor. + */ + m_divisor = OSAMP_MAX_DIVISOR; + d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor); + } + + if (d_divisor < 1) + d_divisor = 1; + else if (d_divisor > BRDV_BAUD_MAX) + d_divisor = BRDV_BAUD_MAX; + + spin_lock_irqsave(&mvebu_uart_lock, flags); brdv = readl(port->membase + UART_BRDV); brdv &= ~BRDV_BAUD_MASK; brdv |= d_divisor; writel(brdv, port->membase + UART_BRDV); + spin_unlock_irqrestore(&mvebu_uart_lock, flags); osamp = readl(port->membase + UART_OSAMP); osamp &= ~OSAMP_DIVISORS_MASK; + if (m_divisor != OSAMP_DEFAULT_DIVISOR) + osamp |= (m_divisor << 0) | (m_divisor << 8) | + (m_divisor << 16) | (m_divisor << 24); writel(osamp, port->membase + UART_OSAMP); return 0; @@ -499,14 +575,16 @@ static void mvebu_uart_set_termios(struct uart_port *port, port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR; /* - * Maximal divisor is 1023 * 16 when using default (x16) scheme. - * Maximum achievable frequency with simple baudrate divisor is 230400. - * Since the error per bit frame would be of more than 15%, achieving - * higher frequencies would require to implement the fractional divisor - * feature. + * Maximal divisor is 1023 and maximal fractional divisor is 63. And + * experiments show that baudrates above 1/80 of parent clock rate are + * not stable. So disallow baudrates above 1/80 of the parent clock + * rate. If port->uartclk is not available, then + * mvebu_uart_baud_rate_set() fails, so values min_baud and max_baud + * in this case do not matter. */ - min_baud = DIV_ROUND_UP(port->uartclk, 1023 * 16); - max_baud = 230400; + min_baud = DIV_ROUND_UP(port->uartclk, BRDV_BAUD_MAX * + OSAMP_MAX_DIVISOR); + max_baud = port->uartclk / 80; baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud); if (mvebu_uart_baud_rate_set(port, baud)) { @@ -598,7 +676,7 @@ static const struct uart_ops mvebu_uart_ops = { #ifdef CONFIG_SERIAL_MVEBU_CONSOLE /* Early Console */ -static void mvebu_uart_putc(struct uart_port *port, int c) +static void mvebu_uart_putc(struct uart_port *port, unsigned char c) { unsigned int st; @@ -659,7 +737,7 @@ static void wait_for_xmite(struct uart_port *port) (val & STAT_TX_EMP), 1, 10000); } -static void mvebu_uart_console_putchar(struct uart_port *port, int ch) +static void mvebu_uart_console_putchar(struct uart_port *port, unsigned char ch) { wait_for_xmitr(port); writel(ch, port->membase + UART_TSH(port)); @@ -762,6 +840,7 @@ static int mvebu_uart_suspend(struct device *dev) { struct mvebu_uart *mvuart = dev_get_drvdata(dev); struct uart_port *port = mvuart->port; + unsigned long flags; uart_suspend_port(&mvebu_uart_driver, port); @@ -770,7 +849,9 @@ static int mvebu_uart_suspend(struct device *dev) mvuart->pm_regs.ctrl = readl(port->membase + UART_CTRL(port)); mvuart->pm_regs.intr = readl(port->membase + UART_INTR(port)); mvuart->pm_regs.stat = readl(port->membase + UART_STAT); + spin_lock_irqsave(&mvebu_uart_lock, flags); mvuart->pm_regs.brdv = readl(port->membase + UART_BRDV); + spin_unlock_irqrestore(&mvebu_uart_lock, flags); mvuart->pm_regs.osamp = readl(port->membase + UART_OSAMP); device_set_wakeup_enable(dev, true); @@ -782,13 +863,16 @@ static int mvebu_uart_resume(struct device *dev) { struct mvebu_uart *mvuart = dev_get_drvdata(dev); struct uart_port *port = mvuart->port; + unsigned long flags; writel(mvuart->pm_regs.rbr, port->membase + UART_RBR(port)); writel(mvuart->pm_regs.tsh, port->membase + UART_TSH(port)); writel(mvuart->pm_regs.ctrl, port->membase + UART_CTRL(port)); writel(mvuart->pm_regs.intr, port->membase + UART_INTR(port)); writel(mvuart->pm_regs.stat, port->membase + UART_STAT); + spin_lock_irqsave(&mvebu_uart_lock, flags); writel(mvuart->pm_regs.brdv, port->membase + UART_BRDV); + spin_unlock_irqrestore(&mvebu_uart_lock, flags); writel(mvuart->pm_regs.osamp, port->membase + UART_OSAMP); uart_resume_port(&mvebu_uart_driver, port); @@ -972,6 +1056,477 @@ static struct platform_driver mvebu_uart_platform_driver = { }, }; +/* This code is based on clk-fixed-factor.c driver and modified. */ + +struct mvebu_uart_clock { + struct clk_hw clk_hw; + int clock_idx; + u32 pm_context_reg1; + u32 pm_context_reg2; +}; + +struct mvebu_uart_clock_base { + struct mvebu_uart_clock clocks[2]; + unsigned int parent_rates[5]; + int parent_idx; + unsigned int div; + void __iomem *reg1; + void __iomem *reg2; + bool configured; +}; + +#define PARENT_CLOCK_XTAL 4 + +#define to_uart_clock(hw) container_of(hw, struct mvebu_uart_clock, clk_hw) +#define to_uart_clock_base(uart_clock) container_of(uart_clock, \ + struct mvebu_uart_clock_base, clocks[uart_clock->clock_idx]) + +static int mvebu_uart_clock_prepare(struct clk_hw *hw) +{ + struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); + struct mvebu_uart_clock_base *uart_clock_base = + to_uart_clock_base(uart_clock); + unsigned int prev_clock_idx, prev_clock_rate, prev_d1d2; + unsigned int parent_clock_idx, parent_clock_rate; + unsigned long flags; + unsigned int d1, d2; + u64 divisor; + u32 val; + + /* + * This function just reconfigures UART Clock Control register (located + * in UART1 address space which controls both UART1 and UART2) to + * selected UART base clock and recalculates current UART1/UART2 + * divisors in their address spaces, so that final baudrate will not be + * changed by switching UART parent clock. This is required for + * otherwise kernel's boot log stops working - we need to ensure that + * UART baudrate does not change during this setup. It is a one time + * operation, it will execute only once and set `configured` to true, + * and be skipped on subsequent calls. Because this UART Clock Control + * register (UART_BRDV) is shared between UART1 baudrate function, + * UART1 clock selector and UART2 clock selector, every access to + * UART_BRDV (reg1) needs to be protected by a lock. + */ + + spin_lock_irqsave(&mvebu_uart_lock, flags); + + if (uart_clock_base->configured) { + spin_unlock_irqrestore(&mvebu_uart_lock, flags); + return 0; + } + + parent_clock_idx = uart_clock_base->parent_idx; + parent_clock_rate = uart_clock_base->parent_rates[parent_clock_idx]; + + val = readl(uart_clock_base->reg1); + + if (uart_clock_base->div > CLK_TBG_DIV1_MAX) { + d1 = CLK_TBG_DIV1_MAX; + d2 = uart_clock_base->div / CLK_TBG_DIV1_MAX; + } else { + d1 = uart_clock_base->div; + d2 = 1; + } + + if (val & CLK_NO_XTAL) { + prev_clock_idx = (val >> CLK_TBG_SEL_SHIFT) & CLK_TBG_SEL_MASK; + prev_d1d2 = ((val >> CLK_TBG_DIV1_SHIFT) & CLK_TBG_DIV1_MASK) * + ((val >> CLK_TBG_DIV2_SHIFT) & CLK_TBG_DIV2_MASK); + } else { + prev_clock_idx = PARENT_CLOCK_XTAL; + prev_d1d2 = 1; + } + + /* Note that uart_clock_base->parent_rates[i] may not be available */ + prev_clock_rate = uart_clock_base->parent_rates[prev_clock_idx]; + + /* Recalculate UART1 divisor so UART1 baudrate does not change */ + if (prev_clock_rate) { + divisor = DIV_U64_ROUND_CLOSEST((u64)(val & BRDV_BAUD_MASK) * + parent_clock_rate * prev_d1d2, + prev_clock_rate * d1 * d2); + if (divisor < 1) + divisor = 1; + else if (divisor > BRDV_BAUD_MAX) + divisor = BRDV_BAUD_MAX; + val = (val & ~BRDV_BAUD_MASK) | divisor; + } + + if (parent_clock_idx != PARENT_CLOCK_XTAL) { + /* Do not use XTAL, select TBG clock and TBG d1 * d2 divisors */ + val |= CLK_NO_XTAL; + val &= ~(CLK_TBG_DIV1_MASK << CLK_TBG_DIV1_SHIFT); + val |= d1 << CLK_TBG_DIV1_SHIFT; + val &= ~(CLK_TBG_DIV2_MASK << CLK_TBG_DIV2_SHIFT); + val |= d2 << CLK_TBG_DIV2_SHIFT; + val &= ~(CLK_TBG_SEL_MASK << CLK_TBG_SEL_SHIFT); + val |= parent_clock_idx << CLK_TBG_SEL_SHIFT; + } else { + /* Use XTAL, TBG bits are then ignored */ + val &= ~CLK_NO_XTAL; + } + + writel(val, uart_clock_base->reg1); + + /* Recalculate UART2 divisor so UART2 baudrate does not change */ + if (prev_clock_rate) { + val = readl(uart_clock_base->reg2); + divisor = DIV_U64_ROUND_CLOSEST((u64)(val & BRDV_BAUD_MASK) * + parent_clock_rate * prev_d1d2, + prev_clock_rate * d1 * d2); + if (divisor < 1) + divisor = 1; + else if (divisor > BRDV_BAUD_MAX) + divisor = BRDV_BAUD_MAX; + val = (val & ~BRDV_BAUD_MASK) | divisor; + writel(val, uart_clock_base->reg2); + } + + uart_clock_base->configured = true; + + spin_unlock_irqrestore(&mvebu_uart_lock, flags); + + return 0; +} + +static int mvebu_uart_clock_enable(struct clk_hw *hw) +{ + struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); + struct mvebu_uart_clock_base *uart_clock_base = + to_uart_clock_base(uart_clock); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&mvebu_uart_lock, flags); + + val = readl(uart_clock_base->reg1); + + if (uart_clock->clock_idx == 0) + val &= ~UART1_CLK_DIS; + else + val &= ~UART2_CLK_DIS; + + writel(val, uart_clock_base->reg1); + + spin_unlock_irqrestore(&mvebu_uart_lock, flags); + + return 0; +} + +static void mvebu_uart_clock_disable(struct clk_hw *hw) +{ + struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); + struct mvebu_uart_clock_base *uart_clock_base = + to_uart_clock_base(uart_clock); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&mvebu_uart_lock, flags); + + val = readl(uart_clock_base->reg1); + + if (uart_clock->clock_idx == 0) + val |= UART1_CLK_DIS; + else + val |= UART2_CLK_DIS; + + writel(val, uart_clock_base->reg1); + + spin_unlock_irqrestore(&mvebu_uart_lock, flags); +} + +static int mvebu_uart_clock_is_enabled(struct clk_hw *hw) +{ + struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); + struct mvebu_uart_clock_base *uart_clock_base = + to_uart_clock_base(uart_clock); + u32 val; + + val = readl(uart_clock_base->reg1); + + if (uart_clock->clock_idx == 0) + return !(val & UART1_CLK_DIS); + else + return !(val & UART2_CLK_DIS); +} + +static int mvebu_uart_clock_save_context(struct clk_hw *hw) +{ + struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); + struct mvebu_uart_clock_base *uart_clock_base = + to_uart_clock_base(uart_clock); + unsigned long flags; + + spin_lock_irqsave(&mvebu_uart_lock, flags); + uart_clock->pm_context_reg1 = readl(uart_clock_base->reg1); + uart_clock->pm_context_reg2 = readl(uart_clock_base->reg2); + spin_unlock_irqrestore(&mvebu_uart_lock, flags); + + return 0; +} + +static void mvebu_uart_clock_restore_context(struct clk_hw *hw) +{ + struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); + struct mvebu_uart_clock_base *uart_clock_base = + to_uart_clock_base(uart_clock); + unsigned long flags; + + spin_lock_irqsave(&mvebu_uart_lock, flags); + writel(uart_clock->pm_context_reg1, uart_clock_base->reg1); + writel(uart_clock->pm_context_reg2, uart_clock_base->reg2); + spin_unlock_irqrestore(&mvebu_uart_lock, flags); +} + +static unsigned long mvebu_uart_clock_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); + struct mvebu_uart_clock_base *uart_clock_base = + to_uart_clock_base(uart_clock); + + return parent_rate / uart_clock_base->div; +} + +static long mvebu_uart_clock_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); + struct mvebu_uart_clock_base *uart_clock_base = + to_uart_clock_base(uart_clock); + + return *parent_rate / uart_clock_base->div; +} + +static int mvebu_uart_clock_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + /* + * We must report success but we can do so unconditionally because + * mvebu_uart_clock_round_rate returns values that ensure this call is a + * nop. + */ + + return 0; +} + +static const struct clk_ops mvebu_uart_clock_ops = { + .prepare = mvebu_uart_clock_prepare, + .enable = mvebu_uart_clock_enable, + .disable = mvebu_uart_clock_disable, + .is_enabled = mvebu_uart_clock_is_enabled, + .save_context = mvebu_uart_clock_save_context, + .restore_context = mvebu_uart_clock_restore_context, + .round_rate = mvebu_uart_clock_round_rate, + .set_rate = mvebu_uart_clock_set_rate, + .recalc_rate = mvebu_uart_clock_recalc_rate, +}; + +static int mvebu_uart_clock_register(struct device *dev, + struct mvebu_uart_clock *uart_clock, + const char *name, + const char *parent_name) +{ + struct clk_init_data init = { }; + + uart_clock->clk_hw.init = &init; + + init.name = name; + init.ops = &mvebu_uart_clock_ops; + init.flags = 0; + init.num_parents = 1; + init.parent_names = &parent_name; + + return devm_clk_hw_register(dev, &uart_clock->clk_hw); +} + +static int mvebu_uart_clock_probe(struct platform_device *pdev) +{ + static const char *const uart_clk_names[] = { "uart_1", "uart_2" }; + static const char *const parent_clk_names[] = { "TBG-A-P", "TBG-B-P", + "TBG-A-S", "TBG-B-S", + "xtal" }; + struct clk *parent_clks[ARRAY_SIZE(parent_clk_names)]; + struct mvebu_uart_clock_base *uart_clock_base; + struct clk_hw_onecell_data *hw_clk_data; + struct device *dev = &pdev->dev; + int i, parent_clk_idx, ret; + unsigned long div, rate; + struct resource *res; + unsigned int d1, d2; + + BUILD_BUG_ON(ARRAY_SIZE(uart_clk_names) != + ARRAY_SIZE(uart_clock_base->clocks)); + BUILD_BUG_ON(ARRAY_SIZE(parent_clk_names) != + ARRAY_SIZE(uart_clock_base->parent_rates)); + + uart_clock_base = devm_kzalloc(dev, + sizeof(*uart_clock_base), + GFP_KERNEL); + if (!uart_clock_base) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "Couldn't get first register\n"); + return -ENOENT; + } + + /* + * UART Clock Control register (reg1 / UART_BRDV) is in the address + * space of UART1 (standard UART variant), controls parent clock and + * dividers for both UART1 and UART2 and is supplied via DT as the first + * resource. Therefore use ioremap() rather than ioremap_resource() to + * avoid conflicts with UART1 driver. Access to UART_BRDV is protected + * by a lock shared between clock and UART driver. + */ + uart_clock_base->reg1 = devm_ioremap(dev, res->start, + resource_size(res)); + if (!uart_clock_base->reg1) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(dev, "Couldn't get second register\n"); + return -ENOENT; + } + + /* + * UART 2 Baud Rate Divisor register (reg2 / UART_BRDV) is in address + * space of UART2 (extended UART variant), controls only one UART2 + * specific divider and is supplied via DT as second resource. + * Therefore use ioremap() rather than ioremap_resource() to avoid + * conflicts with UART2 driver. Access to UART_BRDV is protected by a + * by lock shared between clock and UART driver. + */ + uart_clock_base->reg2 = devm_ioremap(dev, res->start, + resource_size(res)); + if (!uart_clock_base->reg2) + return -ENOMEM; + + hw_clk_data = devm_kzalloc(dev, + struct_size(hw_clk_data, hws, + ARRAY_SIZE(uart_clk_names)), + GFP_KERNEL); + if (!hw_clk_data) + return -ENOMEM; + + hw_clk_data->num = ARRAY_SIZE(uart_clk_names); + for (i = 0; i < ARRAY_SIZE(uart_clk_names); i++) { + hw_clk_data->hws[i] = &uart_clock_base->clocks[i].clk_hw; + uart_clock_base->clocks[i].clock_idx = i; + } + + parent_clk_idx = -1; + + for (i = 0; i < ARRAY_SIZE(parent_clk_names); i++) { + parent_clks[i] = devm_clk_get(dev, parent_clk_names[i]); + if (IS_ERR(parent_clks[i])) { + if (PTR_ERR(parent_clks[i]) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_warn(dev, "Couldn't get the parent clock %s: %ld\n", + parent_clk_names[i], PTR_ERR(parent_clks[i])); + continue; + } + + ret = clk_prepare_enable(parent_clks[i]); + if (ret) { + dev_warn(dev, "Couldn't enable parent clock %s: %d\n", + parent_clk_names[i], ret); + continue; + } + rate = clk_get_rate(parent_clks[i]); + uart_clock_base->parent_rates[i] = rate; + + if (i != PARENT_CLOCK_XTAL) { + /* + * Calculate the smallest TBG d1 and d2 divisors that + * still can provide 9600 baudrate. + */ + d1 = DIV_ROUND_UP(rate, 9600 * OSAMP_MAX_DIVISOR * + BRDV_BAUD_MAX); + if (d1 < 1) + d1 = 1; + else if (d1 > CLK_TBG_DIV1_MAX) + d1 = CLK_TBG_DIV1_MAX; + + d2 = DIV_ROUND_UP(rate, 9600 * OSAMP_MAX_DIVISOR * + BRDV_BAUD_MAX * d1); + if (d2 < 1) + d2 = 1; + else if (d2 > CLK_TBG_DIV2_MAX) + d2 = CLK_TBG_DIV2_MAX; + } else { + /* + * When UART clock uses XTAL clock as a source then it + * is not possible to use d1 and d2 divisors. + */ + d1 = d2 = 1; + } + + /* Skip clock source which cannot provide 9600 baudrate */ + if (rate > 9600 * OSAMP_MAX_DIVISOR * BRDV_BAUD_MAX * d1 * d2) + continue; + + /* + * Choose TBG clock source with the smallest divisors. Use XTAL + * clock source only in case TBG is not available as XTAL cannot + * be used for baudrates higher than 230400. + */ + if (parent_clk_idx == -1 || + (i != PARENT_CLOCK_XTAL && div > d1 * d2)) { + parent_clk_idx = i; + div = d1 * d2; + } + } + + for (i = 0; i < ARRAY_SIZE(parent_clk_names); i++) { + if (i == parent_clk_idx || IS_ERR(parent_clks[i])) + continue; + clk_disable_unprepare(parent_clks[i]); + devm_clk_put(dev, parent_clks[i]); + } + + if (parent_clk_idx == -1) { + dev_err(dev, "No usable parent clock\n"); + return -ENOENT; + } + + uart_clock_base->parent_idx = parent_clk_idx; + uart_clock_base->div = div; + + dev_notice(dev, "Using parent clock %s as base UART clock\n", + __clk_get_name(parent_clks[parent_clk_idx])); + + for (i = 0; i < ARRAY_SIZE(uart_clk_names); i++) { + ret = mvebu_uart_clock_register(dev, + &uart_clock_base->clocks[i], + uart_clk_names[i], + __clk_get_name(parent_clks[parent_clk_idx])); + if (ret) { + dev_err(dev, "Can't register UART clock %d: %d\n", + i, ret); + return ret; + } + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + hw_clk_data); +} + +static const struct of_device_id mvebu_uart_clock_of_match[] = { + { .compatible = "marvell,armada-3700-uart-clock", }, + { } +}; + +static struct platform_driver mvebu_uart_clock_platform_driver = { + .probe = mvebu_uart_clock_probe, + .driver = { + .name = "mvebu-uart-clock", + .of_match_table = mvebu_uart_clock_of_match, + }, +}; + static int __init mvebu_uart_init(void) { int ret; @@ -980,10 +1535,19 @@ static int __init mvebu_uart_init(void) if (ret) return ret; + ret = platform_driver_register(&mvebu_uart_clock_platform_driver); + if (ret) { + uart_unregister_driver(&mvebu_uart_driver); + return ret; + } + ret = platform_driver_register(&mvebu_uart_platform_driver); - if (ret) + if (ret) { + platform_driver_unregister(&mvebu_uart_clock_platform_driver); uart_unregister_driver(&mvebu_uart_driver); + return ret; + } - return ret; + return 0; } arch_initcall(mvebu_uart_init); diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index ac45f3386e97..1944daf8593a 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1305,7 +1305,7 @@ static const struct uart_ops mxs_auart_ops = { static struct mxs_auart_port *auart_port[MXS_AUART_PORTS]; #ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE -static void mxs_auart_console_putchar(struct uart_port *port, int ch) +static void mxs_auart_console_putchar(struct uart_port *port, unsigned char ch) { struct mxs_auart_port *s = to_auart_port(port); unsigned int to = 1000; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 0862941862c8..8d5ffa196097 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -808,21 +808,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long flags; unsigned int baud, quot; - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } + cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag)); if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; @@ -1194,7 +1180,7 @@ static void omap_serial_early_out(struct uart_port *port, int offset, writew(value, port->membase + offset); } -static void omap_serial_early_putc(struct uart_port *port, int c) +static void omap_serial_early_putc(struct uart_port *port, unsigned char c) { unsigned int status; @@ -1238,7 +1224,7 @@ static struct uart_omap_port *serial_omap_console_ports[OMAP_MAX_HSUART_PORTS]; static struct uart_driver serial_omap_reg; -static void serial_omap_console_putchar(struct uart_port *port, int ch) +static void serial_omap_console_putchar(struct uart_port *port, unsigned char ch) { struct uart_omap_port *up = to_uart_omap_port(port); diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index 91f1eb0058d7..5250bd7d390a 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -516,7 +516,7 @@ static const struct uart_ops owl_uart_ops = { #ifdef CONFIG_SERIAL_OWL_CONSOLE -static void owl_console_putchar(struct uart_port *port, int ch) +static void owl_console_putchar(struct uart_port *port, unsigned char ch) { if (!port->membase) return; diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index f0351e6f0ef6..affe71f8b50c 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1600,7 +1600,7 @@ static const struct uart_ops pch_uart_ops = { #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE -static void pch_console_putchar(struct uart_port *port, int ch) +static void pch_console_putchar(struct uart_port *port, unsigned char ch) { struct eg20t_port *priv = container_of(port, struct eg20t_port, port); diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c index 0a12fb11e698..b7a3a1b959b1 100644 --- a/drivers/tty/serial/pic32_uart.c +++ b/drivers/tty/serial/pic32_uart.c @@ -691,7 +691,7 @@ static const struct uart_ops pic32_uart_ops = { #ifdef CONFIG_SERIAL_PIC32_CONSOLE /* output given char */ -static void pic32_console_putchar(struct uart_port *port, int ch) +static void pic32_console_putchar(struct uart_port *port, unsigned char ch) { struct pic32_sport *sport = to_pic32_sport(port); diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 5359236b32d6..5d97c201ad88 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1944,7 +1944,7 @@ static void __exit exit_pmz(void) #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE -static void pmz_console_putchar(struct uart_port *port, int ch) +static void pmz_console_putchar(struct uart_port *port, unsigned char ch) { struct uart_pmac_port *uap = container_of(port, struct uart_pmac_port, port); diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 30b099746a75..e80ba8e10407 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -430,21 +430,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, unsigned int baud, quot; unsigned int dll; - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } + cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag)); if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; @@ -619,7 +605,7 @@ static void wait_for_xmitr(struct uart_pxa_port *up) } } -static void serial_pxa_console_putchar(struct uart_port *port, int ch) +static void serial_pxa_console_putchar(struct uart_port *port, unsigned char ch) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index aedc38893e6c..1543a6028856 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -397,7 +397,7 @@ static void qcom_geni_serial_poll_put_char(struct uart_port *uport, #endif #ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE -static void qcom_geni_serial_wr_char(struct uart_port *uport, int ch) +static void qcom_geni_serial_wr_char(struct uart_port *uport, unsigned char ch) { struct qcom_geni_private_data *private_data = uport->private_data; diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c index d550d8fa2fab..e5f1fded423a 100644 --- a/drivers/tty/serial/rda-uart.c +++ b/drivers/tty/serial/rda-uart.c @@ -573,7 +573,7 @@ static const struct uart_ops rda_uart_ops = { #ifdef CONFIG_SERIAL_RDA_CONSOLE -static void rda_console_putchar(struct uart_port *port, int ch) +static void rda_console_putchar(struct uart_port *port, unsigned char ch) { if (!port->membase) return; diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index 697b6a002a16..5fe6cccfc1ae 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -695,7 +695,7 @@ void __init sa1100_register_uart(int idx, int port) #ifdef CONFIG_SERIAL_SA1100_CONSOLE -static void sa1100_console_putchar(struct uart_port *port, int ch) +static void sa1100_console_putchar(struct uart_port *port, unsigned char ch) { struct sa1100_port *sport = container_of(port, struct sa1100_port, port); diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index d002a4e48ed9..e1585fbae909 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -63,7 +63,7 @@ enum s3c24xx_port_type { }; struct s3c24xx_uart_info { - char *name; + const char *name; enum s3c24xx_port_type type; unsigned int port_type; unsigned int fifosize; @@ -85,9 +85,9 @@ struct s3c24xx_uart_info { }; struct s3c24xx_serial_drv_data { - struct s3c24xx_uart_info *info; - struct s3c2410_uartcfg *def_cfg; - unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS]; + const struct s3c24xx_uart_info info; + const struct s3c2410_uartcfg def_cfg; + const unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS]; }; struct s3c24xx_uart_dma { @@ -136,14 +136,14 @@ struct s3c24xx_uart_port { unsigned int tx_mode; unsigned int rx_mode; - struct s3c24xx_uart_info *info; + const struct s3c24xx_uart_info *info; struct clk *clk; struct clk *baudclk; struct uart_port port; - struct s3c24xx_serial_drv_data *drv_data; + const struct s3c24xx_serial_drv_data *drv_data; /* reference to platform data */ - struct s3c2410_uartcfg *cfg; + const struct s3c2410_uartcfg *cfg; struct s3c24xx_uart_dma *dma; @@ -164,7 +164,7 @@ static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport); #define portaddrl(port, reg) \ ((unsigned long *)(unsigned long)((port)->membase + (reg))) -static u32 rd_reg(struct uart_port *port, u32 reg) +static u32 rd_reg(const struct uart_port *port, u32 reg) { switch (port->iotype) { case UPIO_MEM: @@ -179,7 +179,7 @@ static u32 rd_reg(struct uart_port *port, u32 reg) #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg))) -static void wr_reg(struct uart_port *port, u32 reg, u32 val) +static void wr_reg(const struct uart_port *port, u32 reg, u32 val) { switch (port->iotype) { case UPIO_MEM: @@ -195,7 +195,7 @@ static void wr_reg(struct uart_port *port, u32 reg, u32 val) /* Byte-order aware bit setting/clearing functions. */ -static inline void s3c24xx_set_bit(struct uart_port *port, int idx, +static inline void s3c24xx_set_bit(const struct uart_port *port, int idx, unsigned int reg) { unsigned long flags; @@ -208,7 +208,7 @@ static inline void s3c24xx_set_bit(struct uart_port *port, int idx, local_irq_restore(flags); } -static inline void s3c24xx_clear_bit(struct uart_port *port, int idx, +static inline void s3c24xx_clear_bit(const struct uart_port *port, int idx, unsigned int reg) { unsigned long flags; @@ -228,12 +228,12 @@ static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) /* translate a port to the device name */ -static inline const char *s3c24xx_serial_portname(struct uart_port *port) +static inline const char *s3c24xx_serial_portname(const struct uart_port *port) { return to_platform_device(port->dev)->name; } -static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) +static int s3c24xx_serial_txempty_nofifo(const struct uart_port *port) { return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE; } @@ -358,7 +358,7 @@ static void s3c24xx_serial_tx_dma_complete(void *args) static void enable_tx_dma(struct s3c24xx_uart_port *ourport) { - struct uart_port *port = &ourport->port; + const struct uart_port *port = &ourport->port; u32 ucon; /* Mask Tx interrupt */ @@ -387,7 +387,7 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport) static void enable_tx_pio(struct s3c24xx_uart_port *ourport) { - struct uart_port *port = &ourport->port; + const struct uart_port *port = &ourport->port; u32 ucon, ufcon; /* Set ufcon txtrig */ @@ -573,16 +573,16 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port) } } -static inline struct s3c24xx_uart_info +static inline const struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port) { return to_ourport(port)->info; } -static inline struct s3c2410_uartcfg - *s3c24xx_port_to_cfg(struct uart_port *port) +static inline const struct s3c2410_uartcfg + *s3c24xx_port_to_cfg(const struct uart_port *port) { - struct s3c24xx_uart_port *ourport; + const struct s3c24xx_uart_port *ourport; if (port->dev == NULL) return NULL; @@ -591,10 +591,10 @@ static inline struct s3c2410_uartcfg return ourport->cfg; } -static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, +static int s3c24xx_serial_rx_fifocnt(const struct s3c24xx_uart_port *ourport, unsigned long ufstat) { - struct s3c24xx_uart_info *info = ourport->info; + const struct s3c24xx_uart_info *info = ourport->info; if (ufstat & info->rx_fifofull) return ourport->port.fifosize; @@ -921,11 +921,8 @@ static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport) return; } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) { - spin_unlock(&port->lock); + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - spin_lock(&port->lock); - } if (uart_circ_empty(xmit)) s3c24xx_serial_stop_tx(port); @@ -947,8 +944,8 @@ static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id) /* interrupt handler for s3c64xx and later SoC's.*/ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) { - struct s3c24xx_uart_port *ourport = id; - struct uart_port *port = &ourport->port; + const struct s3c24xx_uart_port *ourport = id; + const struct uart_port *port = &ourport->port; unsigned int pend = rd_regl(port, S3C64XX_UINTP); irqreturn_t ret = IRQ_HANDLED; @@ -966,8 +963,8 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) /* interrupt handler for Apple SoC's.*/ static irqreturn_t apple_serial_handle_irq(int irq, void *id) { - struct s3c24xx_uart_port *ourport = id; - struct uart_port *port = &ourport->port; + const struct s3c24xx_uart_port *ourport = id; + const struct uart_port *port = &ourport->port; unsigned int pend = rd_regl(port, S3C2410_UTRSTAT); irqreturn_t ret = IRQ_NONE; @@ -986,7 +983,7 @@ static irqreturn_t apple_serial_handle_irq(int irq, void *id) static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) { - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); unsigned long ufcon = rd_regl(port, S3C2410_UFCON); @@ -1405,7 +1402,7 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, static inline int s3c24xx_serial_getsource(struct uart_port *port) { - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); unsigned int ucon; if (info->num_clks == 1) @@ -1419,7 +1416,7 @@ static inline int s3c24xx_serial_getsource(struct uart_port *port) static void s3c24xx_serial_setsource(struct uart_port *port, unsigned int clk_sel) { - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); unsigned int ucon; if (info->num_clks == 1) @@ -1438,7 +1435,7 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, unsigned int req_baud, struct clk **best_clk, unsigned int *clk_num) { - struct s3c24xx_uart_info *info = ourport->info; + const struct s3c24xx_uart_info *info = ourport->info; struct clk *clk; unsigned long rate; unsigned int cnt, baud, quot, best_quot = 0; @@ -1499,7 +1496,7 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, * This table takes the fractional value of the baud divisor and gives * the recommended setting for the UDIVSLOT register. */ -static u16 udivslot_table[16] = { +static const u16 udivslot_table[16] = { [0] = 0x0000, [1] = 0x0080, [2] = 0x0808, @@ -1522,7 +1519,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); + const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); struct clk *clk = ERR_PTR(-EINVAL); unsigned long flags; @@ -1675,7 +1672,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, static const char *s3c24xx_serial_type(struct uart_port *port) { - struct s3c24xx_uart_port *ourport = to_ourport(port); + const struct s3c24xx_uart_port *ourport = to_ourport(port); switch (ourport->info->type) { case TYPE_S3C24XX: @@ -1691,7 +1688,7 @@ static const char *s3c24xx_serial_type(struct uart_port *port) static void s3c24xx_serial_config_port(struct uart_port *port, int flags) { - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); if (flags & UART_CONFIG_TYPE) port->type = info->port_type; @@ -1703,7 +1700,7 @@ static void s3c24xx_serial_config_port(struct uart_port *port, int flags) static int s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) { - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); if (ser->type != PORT_UNKNOWN && ser->type != info->port_type) return -EINVAL; @@ -1873,9 +1870,9 @@ s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { */ static void s3c24xx_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) + const struct s3c2410_uartcfg *cfg) { - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); unsigned long ucon = rd_regl(port, S3C2410_UCON); ucon &= (info->clksel_mask | info->ucon_mask); @@ -1979,7 +1976,7 @@ s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport) { struct device *dev = ourport->port.dev; - struct s3c24xx_uart_info *info = ourport->info; + const struct s3c24xx_uart_info *info = ourport->info; char clk_name[MAX_CLK_NAME_LENGTH]; unsigned int clk_sel; struct clk *clk; @@ -2021,7 +2018,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, struct platform_device *platdev) { struct uart_port *port = &ourport->port; - struct s3c2410_uartcfg *cfg = ourport->cfg; + const struct s3c2410_uartcfg *cfg = ourport->cfg; struct resource *res; int ret; @@ -2150,23 +2147,14 @@ err: /* Device driver serial port probe */ -#ifdef CONFIG_OF -static const struct of_device_id s3c24xx_uart_dt_match[]; -#endif - static int probe_index; -static inline struct s3c24xx_serial_drv_data * +static inline const struct s3c24xx_serial_drv_data * s3c24xx_get_driver_data(struct platform_device *pdev) { -#ifdef CONFIG_OF - if (pdev->dev.of_node) { - const struct of_device_id *match; + if (dev_of_node(&pdev->dev)) + return of_device_get_match_data(&pdev->dev); - match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node); - return (struct s3c24xx_serial_drv_data *)match->data; - } -#endif return (struct s3c24xx_serial_drv_data *) platform_get_device_id(pdev)->driver_data; } @@ -2197,10 +2185,10 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) } ourport->baudclk = ERR_PTR(-EINVAL); - ourport->info = ourport->drv_data->info; + ourport->info = &ourport->drv_data->info; ourport->cfg = (dev_get_platdata(&pdev->dev)) ? dev_get_platdata(&pdev->dev) : - ourport->drv_data->def_cfg; + &ourport->drv_data->def_cfg; switch (ourport->info->type) { case TYPE_S3C24XX: @@ -2419,7 +2407,7 @@ static struct uart_port *cons_uart; static int s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) { - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); unsigned long ufstat, utrstat; if (ufcon & S3C2410_UFCON_FIFOMODE) { @@ -2450,7 +2438,7 @@ s3c24xx_port_configured(unsigned int ucon) static int s3c24xx_serial_get_poll_char(struct uart_port *port) { - struct s3c24xx_uart_port *ourport = to_ourport(port); + const struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned int ufstat; ufstat = rd_regl(port, S3C2410_UFSTAT); @@ -2478,7 +2466,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port, #endif /* CONFIG_CONSOLE_POLL */ static void -s3c24xx_serial_console_putchar(struct uart_port *port, int ch) +s3c24xx_serial_console_putchar(struct uart_port *port, unsigned char ch) { unsigned int ufcon = rd_regl(port, S3C2410_UFCON); @@ -2615,8 +2603,8 @@ static struct console s3c24xx_serial_console = { #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ #ifdef CONFIG_CPU_S3C2410 -static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { - .info = &(struct s3c24xx_uart_info) { +static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { + .info = { .name = "Samsung S3C2410 UART", .type = TYPE_S3C24XX, .port_type = PORT_S3C2410, @@ -2632,19 +2620,19 @@ static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { .clksel_mask = S3C2410_UCON_CLKMASK, .clksel_shift = S3C2410_UCON_CLKSHIFT, }, - .def_cfg = &(struct s3c2410_uartcfg) { + .def_cfg = { .ucon = S3C2410_UCON_DEFAULT, .ufcon = S3C2410_UFCON_DEFAULT, }, }; -#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data) +#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data) #else -#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#define S3C2410_SERIAL_DRV_DATA NULL #endif #ifdef CONFIG_CPU_S3C2412 -static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { - .info = &(struct s3c24xx_uart_info) { +static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { + .info = { .name = "Samsung S3C2412 UART", .type = TYPE_S3C24XX, .port_type = PORT_S3C2412, @@ -2661,20 +2649,20 @@ static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { .clksel_mask = S3C2412_UCON_CLKMASK, .clksel_shift = S3C2412_UCON_CLKSHIFT, }, - .def_cfg = &(struct s3c2410_uartcfg) { + .def_cfg = { .ucon = S3C2410_UCON_DEFAULT, .ufcon = S3C2410_UFCON_DEFAULT, }, }; -#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data) +#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data) #else -#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#define S3C2412_SERIAL_DRV_DATA NULL #endif #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442) -static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { - .info = &(struct s3c24xx_uart_info) { +static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { + .info = { .name = "Samsung S3C2440 UART", .type = TYPE_S3C24XX, .port_type = PORT_S3C2440, @@ -2692,19 +2680,19 @@ static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { .clksel_shift = S3C2412_UCON_CLKSHIFT, .ucon_mask = S3C2440_UCON0_DIVMASK, }, - .def_cfg = &(struct s3c2410_uartcfg) { + .def_cfg = { .ucon = S3C2410_UCON_DEFAULT, .ufcon = S3C2410_UFCON_DEFAULT, }, }; -#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data) +#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data) #else -#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#define S3C2440_SERIAL_DRV_DATA NULL #endif #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) -static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { - .info = &(struct s3c24xx_uart_info) { +static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { + .info = { .name = "Samsung S3C6400 UART", .type = TYPE_S3C6400, .port_type = PORT_S3C6400, @@ -2721,19 +2709,19 @@ static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { .clksel_mask = S3C6400_UCON_CLKMASK, .clksel_shift = S3C6400_UCON_CLKSHIFT, }, - .def_cfg = &(struct s3c2410_uartcfg) { + .def_cfg = { .ucon = S3C2410_UCON_DEFAULT, .ufcon = S3C2410_UFCON_DEFAULT, }, }; -#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data) +#define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data) #else -#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#define S3C6400_SERIAL_DRV_DATA NULL #endif #ifdef CONFIG_CPU_S5PV210 -static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { - .info = &(struct s3c24xx_uart_info) { +static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { + .info = { .name = "Samsung S5PV210 UART", .type = TYPE_S3C6400, .port_type = PORT_S3C6400, @@ -2749,20 +2737,20 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { .clksel_mask = S5PV210_UCON_CLKMASK, .clksel_shift = S5PV210_UCON_CLKSHIFT, }, - .def_cfg = &(struct s3c2410_uartcfg) { + .def_cfg = { .ucon = S5PV210_UCON_DEFAULT, .ufcon = S5PV210_UFCON_DEFAULT, }, .fifosize = { 256, 64, 16, 16 }, }; -#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data) +#define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data) #else -#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#define S5PV210_SERIAL_DRV_DATA NULL #endif #if defined(CONFIG_ARCH_EXYNOS) #define EXYNOS_COMMON_SERIAL_DRV_DATA() \ - .info = &(struct s3c24xx_uart_info) { \ + .info = { \ .name = "Samsung Exynos UART", \ .type = TYPE_S3C6400, \ .port_type = PORT_S3C6400, \ @@ -2778,40 +2766,40 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { .clksel_mask = 0, \ .clksel_shift = 0, \ }, \ - .def_cfg = &(struct s3c2410_uartcfg) { \ + .def_cfg = { \ .ucon = S5PV210_UCON_DEFAULT, \ .ufcon = S5PV210_UFCON_DEFAULT, \ .has_fracval = 1, \ } \ -static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { +static const struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { EXYNOS_COMMON_SERIAL_DRV_DATA(), .fifosize = { 256, 64, 16, 16 }, }; -static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { +static const struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { EXYNOS_COMMON_SERIAL_DRV_DATA(), .fifosize = { 64, 256, 16, 256 }, }; -static struct s3c24xx_serial_drv_data exynos850_serial_drv_data = { +static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = { EXYNOS_COMMON_SERIAL_DRV_DATA(), .fifosize = { 256, 64, 64, 64 }, }; -#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) -#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data) -#define EXYNOS850_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos850_serial_drv_data) +#define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data) +#define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data) +#define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data) #else -#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)NULL) -#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)NULL) -#define EXYNOS850_SERIAL_DRV_DATA ((kernel_ulong_t)NULL) +#define EXYNOS4210_SERIAL_DRV_DATA NULL +#define EXYNOS5433_SERIAL_DRV_DATA NULL +#define EXYNOS850_SERIAL_DRV_DATA NULL #endif #ifdef CONFIG_ARCH_APPLE -static struct s3c24xx_serial_drv_data s5l_serial_drv_data = { - .info = &(struct s3c24xx_uart_info) { +static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = { + .info = { .name = "Apple S5L UART", .type = TYPE_APPLE_S5L, .port_type = PORT_8250, @@ -2827,44 +2815,77 @@ static struct s3c24xx_serial_drv_data s5l_serial_drv_data = { .clksel_mask = 0, .clksel_shift = 0, }, - .def_cfg = &(struct s3c2410_uartcfg) { + .def_cfg = { .ucon = APPLE_S5L_UCON_DEFAULT, .ufcon = S3C2410_UFCON_DEFAULT, }, }; -#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)&s5l_serial_drv_data) +#define S5L_SERIAL_DRV_DATA (&s5l_serial_drv_data) #else -#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL) +#define S5L_SERIAL_DRV_DATA NULL +#endif + +#if defined(CONFIG_ARCH_ARTPEC) +static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = { + .info = { + .name = "Axis ARTPEC-8 UART", + .type = TYPE_S3C6400, + .port_type = PORT_S3C6400, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 1, + .clksel_mask = 0, + .clksel_shift = 0, + }, + .def_cfg = { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + .has_fracval = 1, + } +}; +#define ARTPEC8_SERIAL_DRV_DATA (&artpec8_serial_drv_data) +#else +#define ARTPEC8_SERIAL_DRV_DATA (NULL) #endif static const struct platform_device_id s3c24xx_serial_driver_ids[] = { { .name = "s3c2410-uart", - .driver_data = S3C2410_SERIAL_DRV_DATA, + .driver_data = (kernel_ulong_t)S3C2410_SERIAL_DRV_DATA, }, { .name = "s3c2412-uart", - .driver_data = S3C2412_SERIAL_DRV_DATA, + .driver_data = (kernel_ulong_t)S3C2412_SERIAL_DRV_DATA, }, { .name = "s3c2440-uart", - .driver_data = S3C2440_SERIAL_DRV_DATA, + .driver_data = (kernel_ulong_t)S3C2440_SERIAL_DRV_DATA, }, { .name = "s3c6400-uart", - .driver_data = S3C6400_SERIAL_DRV_DATA, + .driver_data = (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA, }, { .name = "s5pv210-uart", - .driver_data = S5PV210_SERIAL_DRV_DATA, + .driver_data = (kernel_ulong_t)S5PV210_SERIAL_DRV_DATA, }, { .name = "exynos4210-uart", - .driver_data = EXYNOS4210_SERIAL_DRV_DATA, + .driver_data = (kernel_ulong_t)EXYNOS4210_SERIAL_DRV_DATA, }, { .name = "exynos5433-uart", - .driver_data = EXYNOS5433_SERIAL_DRV_DATA, + .driver_data = (kernel_ulong_t)EXYNOS5433_SERIAL_DRV_DATA, }, { .name = "s5l-uart", - .driver_data = S5L_SERIAL_DRV_DATA, + .driver_data = (kernel_ulong_t)S5L_SERIAL_DRV_DATA, }, { .name = "exynos850-uart", - .driver_data = EXYNOS850_SERIAL_DRV_DATA, + .driver_data = (kernel_ulong_t)EXYNOS850_SERIAL_DRV_DATA, + }, { + .name = "artpec8-uart", + .driver_data = (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA, }, { }, }; @@ -2873,23 +2894,25 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); #ifdef CONFIG_OF static const struct of_device_id s3c24xx_uart_dt_match[] = { { .compatible = "samsung,s3c2410-uart", - .data = (void *)S3C2410_SERIAL_DRV_DATA }, + .data = S3C2410_SERIAL_DRV_DATA }, { .compatible = "samsung,s3c2412-uart", - .data = (void *)S3C2412_SERIAL_DRV_DATA }, + .data = S3C2412_SERIAL_DRV_DATA }, { .compatible = "samsung,s3c2440-uart", - .data = (void *)S3C2440_SERIAL_DRV_DATA }, + .data = S3C2440_SERIAL_DRV_DATA }, { .compatible = "samsung,s3c6400-uart", - .data = (void *)S3C6400_SERIAL_DRV_DATA }, + .data = S3C6400_SERIAL_DRV_DATA }, { .compatible = "samsung,s5pv210-uart", - .data = (void *)S5PV210_SERIAL_DRV_DATA }, + .data = S5PV210_SERIAL_DRV_DATA }, { .compatible = "samsung,exynos4210-uart", - .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, + .data = EXYNOS4210_SERIAL_DRV_DATA }, { .compatible = "samsung,exynos5433-uart", - .data = (void *)EXYNOS5433_SERIAL_DRV_DATA }, + .data = EXYNOS5433_SERIAL_DRV_DATA }, { .compatible = "apple,s5l-uart", - .data = (void *)S5L_SERIAL_DRV_DATA }, + .data = S5L_SERIAL_DRV_DATA }, { .compatible = "samsung,exynos850-uart", - .data = (void *)EXYNOS850_SERIAL_DRV_DATA }, + .data = EXYNOS850_SERIAL_DRV_DATA }, + { .compatible = "axis,artpec8-uart", + .data = ARTPEC8_SERIAL_DRV_DATA }, {}, }; MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); @@ -2935,7 +2958,7 @@ module_exit(samsung_serial_exit); * Early console. */ -static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val) +static void wr_reg_barrier(const struct uart_port *port, u32 reg, u32 val) { switch (port->iotype) { case UPIO_MEM: @@ -2949,23 +2972,24 @@ static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val) struct samsung_early_console_data { u32 txfull_mask; + u32 rxfifo_mask; }; -static void samsung_early_busyuart(struct uart_port *port) +static void samsung_early_busyuart(const struct uart_port *port) { while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE)) ; } -static void samsung_early_busyuart_fifo(struct uart_port *port) +static void samsung_early_busyuart_fifo(const struct uart_port *port) { - struct samsung_early_console_data *data = port->private_data; + const struct samsung_early_console_data *data = port->private_data; while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask) ; } -static void samsung_early_putc(struct uart_port *port, int c) +static void samsung_early_putc(struct uart_port *port, unsigned char c) { if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) samsung_early_busyuart_fifo(port); @@ -2983,6 +3007,26 @@ static void samsung_early_write(struct console *con, const char *s, uart_console_write(&dev->port, s, n, samsung_early_putc); } +static int samsung_early_read(struct console *con, char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + const struct samsung_early_console_data *data = dev->port.private_data; + int ch, ufstat, num_read = 0; + + while (num_read < n) { + ufstat = rd_regl(&dev->port, S3C2410_UFSTAT); + if (!(ufstat & data->rxfifo_mask)) + break; + ch = rd_reg(&dev->port, S3C2410_URXH); + if (ch == NO_POLL_CHAR) + break; + + s[num_read++] = ch; + } + + return num_read; +} + static int __init samsung_early_console_setup(struct earlycon_device *device, const char *opt) { @@ -2990,12 +3034,14 @@ static int __init samsung_early_console_setup(struct earlycon_device *device, return -ENODEV; device->con->write = samsung_early_write; + device->con->read = samsung_early_read; return 0; } /* S3C2410 */ static struct samsung_early_console_data s3c2410_early_console_data = { .txfull_mask = S3C2410_UFSTAT_TXFULL, + .rxfifo_mask = S3C2410_UFSTAT_RXFULL | S3C2410_UFSTAT_RXMASK, }; static int __init s3c2410_early_console_setup(struct earlycon_device *device, @@ -3011,6 +3057,7 @@ OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart", /* S3C2412, S3C2440, S3C64xx */ static struct samsung_early_console_data s3c2440_early_console_data = { .txfull_mask = S3C2440_UFSTAT_TXFULL, + .rxfifo_mask = S3C2440_UFSTAT_RXFULL | S3C2440_UFSTAT_RXMASK, }; static int __init s3c2440_early_console_setup(struct earlycon_device *device, @@ -3030,6 +3077,7 @@ OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart", /* S5PV210, Exynos */ static struct samsung_early_console_data s5pv210_early_console_data = { .txfull_mask = S5PV210_UFSTAT_TXFULL, + .rxfifo_mask = S5PV210_UFSTAT_RXFULL | S5PV210_UFSTAT_RXMASK, }; static int __init s5pv210_early_console_setup(struct earlycon_device *device, @@ -3043,6 +3091,8 @@ OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart", s5pv210_early_console_setup); OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart", s5pv210_early_console_setup); +OF_EARLYCON_DECLARE(artpec8, "axis,artpec8-uart", + s5pv210_early_console_setup); /* Apple S5L */ static int __init apple_s5l_early_console_setup(struct earlycon_device *device, diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index 738df6d9c0d9..2cf8533ef760 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -820,7 +820,7 @@ static void __init sbd_probe_duarts(void) * console output. The console_lock is held by the caller, so we * shouldn't be interrupted for more console activity. */ -static void sbd_console_putchar(struct uart_port *uport, int ch) +static void sbd_console_putchar(struct uart_port *uport, unsigned char ch) { struct sbd_port *sport = to_sport(uport); diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 3a6c68e19c80..e857fb61efbf 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -289,6 +289,14 @@ * XON1, XON2, XOFF1 and * XOFF2 */ +#define SC16IS7XX_EFR_FLOWCTRL_BITS (SC16IS7XX_EFR_AUTORTS_BIT | \ + SC16IS7XX_EFR_AUTOCTS_BIT | \ + SC16IS7XX_EFR_XOFF2_DETECT_BIT | \ + SC16IS7XX_EFR_SWFLOW3_BIT | \ + SC16IS7XX_EFR_SWFLOW2_BIT | \ + SC16IS7XX_EFR_SWFLOW1_BIT | \ + SC16IS7XX_EFR_SWFLOW0_BIT) + /* Misc definitions */ #define SC16IS7XX_FIFO_SIZE (64) @@ -298,6 +306,7 @@ struct sc16is7xx_devtype { char name[10]; int nr_gpio; int nr_uart; + int has_mctrl; }; #define SC16IS7XX_RECONF_MD (1 << 0) @@ -306,7 +315,8 @@ struct sc16is7xx_devtype { struct sc16is7xx_one_config { unsigned int flags; - u8 ier_clear; + u8 ier_mask; + u8 ier_val; }; struct sc16is7xx_one { @@ -314,8 +324,10 @@ struct sc16is7xx_one { u8 line; struct kthread_work tx_work; struct kthread_work reg_work; + struct kthread_delayed_work ms_work; struct sc16is7xx_one_config config; bool irda_mode; + unsigned int old_mctrl; }; struct sc16is7xx_port { @@ -340,6 +352,9 @@ static struct uart_driver sc16is7xx_uart = { .nr = SC16IS7XX_MAX_DEVS, }; +static void sc16is7xx_ier_set(struct uart_port *port, u8 bit); +static void sc16is7xx_stop_tx(struct uart_port *port); + #define to_sc16is7xx_port(p,e) ((container_of((p), struct sc16is7xx_port, e))) #define to_sc16is7xx_one(p,e) ((container_of((p), struct sc16is7xx_one, e))) @@ -432,30 +447,35 @@ static const struct sc16is7xx_devtype sc16is74x_devtype = { .name = "SC16IS74X", .nr_gpio = 0, .nr_uart = 1, + .has_mctrl = 0, }; static const struct sc16is7xx_devtype sc16is750_devtype = { .name = "SC16IS750", - .nr_gpio = 8, + .nr_gpio = 4, .nr_uart = 1, + .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is752_devtype = { .name = "SC16IS752", - .nr_gpio = 8, + .nr_gpio = 0, .nr_uart = 2, + .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is760_devtype = { .name = "SC16IS760", - .nr_gpio = 8, + .nr_gpio = 4, .nr_uart = 1, + .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is762_devtype = { .name = "SC16IS762", - .nr_gpio = 8, + .nr_gpio = 0, .nr_uart = 2, + .has_mctrl = 1, }; static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) @@ -523,8 +543,10 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud) /* Enable enhanced features */ regcache_cache_bypass(s->regmap, true); - sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, - SC16IS7XX_EFR_ENABLE_BIT); + sc16is7xx_port_update(port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_ENABLE_BIT, + SC16IS7XX_EFR_ENABLE_BIT); + regcache_cache_bypass(s->regmap, false); /* Put LCR back to the normal mode */ @@ -635,6 +657,7 @@ static void sc16is7xx_handle_tx(struct uart_port *port) struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct circ_buf *xmit = &port->state->xmit; unsigned int txlen, to_send, i; + unsigned long flags; if (unlikely(port->x_char)) { sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char); @@ -643,8 +666,12 @@ static void sc16is7xx_handle_tx(struct uart_port *port) return; } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + spin_lock_irqsave(&port->lock, flags); + sc16is7xx_stop_tx(port); + spin_unlock_irqrestore(&port->lock, flags); return; + } /* Get length of data pending in circular buffer */ to_send = uart_circ_chars_pending(xmit); @@ -671,8 +698,56 @@ static void sc16is7xx_handle_tx(struct uart_port *port) sc16is7xx_fifo_write(port, to_send); } + spin_lock_irqsave(&port->lock, flags); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + sc16is7xx_stop_tx(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +static unsigned int sc16is7xx_get_hwmctrl(struct uart_port *port) +{ + u8 msr = sc16is7xx_port_read(port, SC16IS7XX_MSR_REG); + unsigned int mctrl = 0; + + mctrl |= (msr & SC16IS7XX_MSR_CTS_BIT) ? TIOCM_CTS : 0; + mctrl |= (msr & SC16IS7XX_MSR_DSR_BIT) ? TIOCM_DSR : 0; + mctrl |= (msr & SC16IS7XX_MSR_CD_BIT) ? TIOCM_CAR : 0; + mctrl |= (msr & SC16IS7XX_MSR_RI_BIT) ? TIOCM_RNG : 0; + return mctrl; +} + +static void sc16is7xx_update_mlines(struct sc16is7xx_one *one) +{ + struct uart_port *port = &one->port; + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned long flags; + unsigned int status, changed; + + lockdep_assert_held_once(&s->efr_lock); + + status = sc16is7xx_get_hwmctrl(port); + changed = status ^ one->old_mctrl; + + if (changed == 0) + return; + + one->old_mctrl = status; + + spin_lock_irqsave(&port->lock, flags); + if ((changed & TIOCM_RNG) && (status & TIOCM_RNG)) + port->icount.rng++; + if (changed & TIOCM_DSR) + port->icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(port, status & TIOCM_CTS); + + wake_up_interruptible(&port->state->port.delta_msr_wait); + spin_unlock_irqrestore(&port->lock, flags); } static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) @@ -681,6 +756,7 @@ static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) do { unsigned int iir, rxlen; + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); if (iir & SC16IS7XX_IIR_NO_INT_BIT) @@ -697,6 +773,11 @@ static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) if (rxlen) sc16is7xx_handle_rx(port, rxlen, iir); break; + /* CTSRTS interrupt comes only when CTS goes inactive */ + case SC16IS7XX_IIR_CTSRTS_SRC: + case SC16IS7XX_IIR_MSI_SRC: + sc16is7xx_update_mlines(one); + break; case SC16IS7XX_IIR_THRI_SRC: sc16is7xx_handle_tx(port); break; @@ -735,6 +816,7 @@ static void sc16is7xx_tx_proc(struct kthread_work *ws) { struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port); struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned long flags; if ((port->rs485.flags & SER_RS485_ENABLED) && (port->rs485.delay_rts_before_send > 0)) @@ -743,6 +825,10 @@ static void sc16is7xx_tx_proc(struct kthread_work *ws) mutex_lock(&s->efr_lock); sc16is7xx_handle_tx(port); mutex_unlock(&s->efr_lock); + + spin_lock_irqsave(&port->lock, flags); + sc16is7xx_ier_set(port, SC16IS7XX_IER_THRI_BIT); + spin_unlock_irqrestore(&port->lock, flags); } static void sc16is7xx_reconf_rs485(struct uart_port *port) @@ -777,22 +863,27 @@ static void sc16is7xx_reg_proc(struct kthread_work *ws) spin_unlock_irqrestore(&one->port.lock, irqflags); if (config.flags & SC16IS7XX_RECONF_MD) { + u8 mcr = 0; + + /* Device ignores RTS setting when hardware flow is enabled */ + if (one->port.mctrl & TIOCM_RTS) + mcr |= SC16IS7XX_MCR_RTS_BIT; + + if (one->port.mctrl & TIOCM_DTR) + mcr |= SC16IS7XX_MCR_DTR_BIT; + + if (one->port.mctrl & TIOCM_LOOP) + mcr |= SC16IS7XX_MCR_LOOP_BIT; sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_RTS_BIT | + SC16IS7XX_MCR_DTR_BIT | SC16IS7XX_MCR_LOOP_BIT, - (one->port.mctrl & TIOCM_LOOP) ? - SC16IS7XX_MCR_LOOP_BIT : 0); - sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, - SC16IS7XX_MCR_RTS_BIT, - (one->port.mctrl & TIOCM_RTS) ? - SC16IS7XX_MCR_RTS_BIT : 0); - sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, - SC16IS7XX_MCR_DTR_BIT, - (one->port.mctrl & TIOCM_DTR) ? - SC16IS7XX_MCR_DTR_BIT : 0); + mcr); } + if (config.flags & SC16IS7XX_RECONF_IER) sc16is7xx_port_update(&one->port, SC16IS7XX_IER_REG, - config.ier_clear, 0); + config.ier_mask, config.ier_val); if (config.flags & SC16IS7XX_RECONF_RS485) sc16is7xx_reconf_rs485(&one->port); @@ -803,8 +894,24 @@ static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit) struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + lockdep_assert_held_once(&port->lock); + + one->config.flags |= SC16IS7XX_RECONF_IER; + one->config.ier_mask |= bit; + one->config.ier_val &= ~bit; + kthread_queue_work(&s->kworker, &one->reg_work); +} + +static void sc16is7xx_ier_set(struct uart_port *port, u8 bit) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + lockdep_assert_held_once(&port->lock); + one->config.flags |= SC16IS7XX_RECONF_IER; - one->config.ier_clear |= bit; + one->config.ier_mask |= bit; + one->config.ier_val |= bit; kthread_queue_work(&s->kworker, &one->reg_work); } @@ -818,6 +925,30 @@ static void sc16is7xx_stop_rx(struct uart_port *port) sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT); } +static void sc16is7xx_ms_proc(struct kthread_work *ws) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(ws, ms_work.work); + struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev); + + if (one->port.state) { + mutex_lock(&s->efr_lock); + sc16is7xx_update_mlines(one); + mutex_unlock(&s->efr_lock); + + kthread_queue_delayed_work(&s->kworker, &one->ms_work, HZ); + } +} + +static void sc16is7xx_enable_ms(struct uart_port *port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + lockdep_assert_held_once(&port->lock); + + kthread_queue_delayed_work(&s->kworker, &one->ms_work, 0); +} + static void sc16is7xx_start_tx(struct uart_port *port) { struct sc16is7xx_port *s = dev_get_drvdata(port->dev); @@ -826,6 +957,29 @@ static void sc16is7xx_start_tx(struct uart_port *port) kthread_queue_work(&s->kworker, &one->tx_work); } +static void sc16is7xx_throttle(struct uart_port *port) +{ + unsigned long flags; + + /* + * Hardware flow control is enabled and thus the device ignores RTS + * value set in MCR register. Stop reading data from RX FIFO so the + * AutoRTS feature will de-activate RTS output. + */ + spin_lock_irqsave(&port->lock, flags); + sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void sc16is7xx_unthrottle(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + sc16is7xx_ier_set(port, SC16IS7XX_IER_RDI_BIT); + spin_unlock_irqrestore(&port->lock, flags); +} + static unsigned int sc16is7xx_tx_empty(struct uart_port *port) { unsigned int lsr; @@ -837,10 +991,10 @@ static unsigned int sc16is7xx_tx_empty(struct uart_port *port) static unsigned int sc16is7xx_get_mctrl(struct uart_port *port) { - /* DCD and DSR are not wired and CTS/RTS is handled automatically - * so just indicate DSR and CAR asserted - */ - return TIOCM_DSR | TIOCM_CAR; + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + /* Called with port lock taken so we can only return cached value */ + return one->old_mctrl; } static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl) @@ -864,8 +1018,12 @@ static void sc16is7xx_set_termios(struct uart_port *port, struct ktermios *old) { struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); unsigned int lcr, flow = 0; int baud; + unsigned long flags; + + kthread_cancel_delayed_work_sync(&one->ms_work); /* Mask termios capabilities we don't support */ termios->c_cflag &= ~CMSPAR; @@ -927,15 +1085,22 @@ static void sc16is7xx_set_termios(struct uart_port *port, regcache_cache_bypass(s->regmap, true); sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]); sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]); - if (termios->c_cflag & CRTSCTS) + + port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS); + if (termios->c_cflag & CRTSCTS) { flow |= SC16IS7XX_EFR_AUTOCTS_BIT | SC16IS7XX_EFR_AUTORTS_BIT; + port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + } if (termios->c_iflag & IXON) flow |= SC16IS7XX_EFR_SWFLOW3_BIT; if (termios->c_iflag & IXOFF) flow |= SC16IS7XX_EFR_SWFLOW1_BIT; - sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, flow); + sc16is7xx_port_update(port, + SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_FLOWCTRL_BITS, + flow); regcache_cache_bypass(s->regmap, false); /* Update LCR register */ @@ -951,8 +1116,15 @@ static void sc16is7xx_set_termios(struct uart_port *port, /* Setup baudrate generator */ baud = sc16is7xx_set_baud(port, baud); + spin_lock_irqsave(&port->lock, flags); + /* Update timeout according to new baud rate */ uart_update_timeout(port, termios->c_cflag, baud); + + if (UART_ENABLE_MS(port, termios->c_cflag)) + sc16is7xx_enable_ms(port); + + spin_unlock_irqrestore(&port->lock, flags); } static int sc16is7xx_config_rs485(struct uart_port *port, @@ -993,6 +1165,7 @@ static int sc16is7xx_startup(struct uart_port *port) struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); struct sc16is7xx_port *s = dev_get_drvdata(port->dev); unsigned int val; + unsigned long flags; sc16is7xx_power(port, 1); @@ -1010,8 +1183,9 @@ static int sc16is7xx_startup(struct uart_port *port) regcache_cache_bypass(s->regmap, true); /* Enable write access to enhanced features and internal clock div */ - sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, - SC16IS7XX_EFR_ENABLE_BIT); + sc16is7xx_port_update(port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_ENABLE_BIT, + SC16IS7XX_EFR_ENABLE_BIT); /* Enable TCR/TLR */ sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, @@ -1042,23 +1216,34 @@ static int sc16is7xx_startup(struct uart_port *port) SC16IS7XX_EFCR_TXDISABLE_BIT, 0); - /* Enable RX, TX interrupts */ - val = SC16IS7XX_IER_RDI_BIT | SC16IS7XX_IER_THRI_BIT; + /* Enable RX, CTS change and modem lines interrupts */ + val = SC16IS7XX_IER_RDI_BIT | SC16IS7XX_IER_CTSI_BIT | + SC16IS7XX_IER_MSI_BIT; sc16is7xx_port_write(port, SC16IS7XX_IER_REG, val); + /* Enable modem status polling */ + spin_lock_irqsave(&port->lock, flags); + sc16is7xx_enable_ms(port); + spin_unlock_irqrestore(&port->lock, flags); + return 0; } static void sc16is7xx_shutdown(struct uart_port *port) { struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + kthread_cancel_delayed_work_sync(&one->ms_work); /* Disable all interrupts */ sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0); - /* Disable TX/RX */ + /* Disable TX/RX, clear auto RS485 and RTS invert */ sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, SC16IS7XX_EFCR_RXDISABLE_BIT | - SC16IS7XX_EFCR_TXDISABLE_BIT, + SC16IS7XX_EFCR_TXDISABLE_BIT | + SC16IS7XX_EFCR_AUTO_RS485_BIT | + SC16IS7XX_EFCR_RTS_INVERT_BIT, SC16IS7XX_EFCR_RXDISABLE_BIT | SC16IS7XX_EFCR_TXDISABLE_BIT); @@ -1114,7 +1299,10 @@ static const struct uart_ops sc16is7xx_ops = { .get_mctrl = sc16is7xx_get_mctrl, .stop_tx = sc16is7xx_stop_tx, .start_tx = sc16is7xx_start_tx, + .throttle = sc16is7xx_throttle, + .unthrottle = sc16is7xx_unthrottle, .stop_rx = sc16is7xx_stop_rx, + .enable_ms = sc16is7xx_enable_ms, .break_ctl = sc16is7xx_break_ctl, .startup = sc16is7xx_startup, .shutdown = sc16is7xx_shutdown, @@ -1281,7 +1469,9 @@ static int sc16is7xx_probe(struct device *dev, s->p[i].port.uartclk = freq; s->p[i].port.rs485_config = sc16is7xx_config_rs485; s->p[i].port.ops = &sc16is7xx_ops; + s->p[i].old_mctrl = 0; s->p[i].port.line = sc16is7xx_alloc_line(); + if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { ret = -ENOMEM; goto out_ports; @@ -1293,9 +1483,17 @@ static int sc16is7xx_probe(struct device *dev, sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG, SC16IS7XX_EFCR_RXDISABLE_BIT | SC16IS7XX_EFCR_TXDISABLE_BIT); + + /* Use GPIO lines as modem status registers */ + if (devtype->has_mctrl) + sc16is7xx_port_write(&s->p[i].port, + SC16IS7XX_IOCONTROL_REG, + SC16IS7XX_IOCONTROL_MODEM_BIT); + /* Initialize kthread work structs */ kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); + kthread_init_delayed_work(&s->p[i].ms_work, sc16is7xx_ms_proc); /* Register port */ uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); @@ -1379,6 +1577,7 @@ static void sc16is7xx_remove(struct device *dev) #endif for (i = 0; i < s->devtype->nr_uart; i++) { + kthread_cancel_delayed_work_sync(&s->p[i].ms_work); uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); clear_bit(s->p[i].port.line, &sc16is7xx_lines); sc16is7xx_power(&s->p[i].port, 0); diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 10cc16a71f26..c56de2e104d4 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -828,7 +828,7 @@ static const struct uart_ops sccnxp_ops = { }; #ifdef CONFIG_SERIAL_SCCNXP_CONSOLE -static void sccnxp_console_putchar(struct uart_port *port, int c) +static void sccnxp_console_putchar(struct uart_port *port, unsigned char c) { int tryes = 100000; diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index b6223fab0687..d942ab152f5a 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1277,6 +1277,7 @@ static void tegra_uart_set_termios(struct uart_port *u, unsigned int baud; unsigned long flags; unsigned int lcr; + unsigned char char_bits; int symb_bit = 1; struct clk *parent_clk = clk_get_parent(tup->uart_clk); unsigned long parent_clk_rate = clk_get_rate(parent_clk); @@ -1316,25 +1317,10 @@ static void tegra_uart_set_termios(struct uart_port *u, } } + char_bits = tty_get_char_size(termios->c_cflag); + symb_bit += char_bits; lcr &= ~UART_LCR_WLEN8; - switch (termios->c_cflag & CSIZE) { - case CS5: - lcr |= UART_LCR_WLEN5; - symb_bit += 5; - break; - case CS6: - lcr |= UART_LCR_WLEN6; - symb_bit += 6; - break; - case CS7: - lcr |= UART_LCR_WLEN7; - symb_bit += 7; - break; - default: - lcr |= UART_LCR_WLEN8; - symb_bit += 8; - break; - } + lcr |= UART_LCR_WLEN(char_bits); /* Stop bits */ if (termios->c_cflag & CSTOPB) { diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0db90be4c3bc..6a8963caf954 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -105,6 +105,7 @@ void uart_write_wakeup(struct uart_port *port) BUG_ON(!state); tty_port_tty_wakeup(&state->port); } +EXPORT_SYMBOL(uart_write_wakeup); static void uart_stop(struct tty_struct *tty) { @@ -316,8 +317,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) state->xmit.buf = NULL; uart_port_unlock(uport, flags); - if (xmit_buf) - free_page((unsigned long)xmit_buf); + free_page((unsigned long)xmit_buf); } /** @@ -343,7 +343,6 @@ uart_update_timeout(struct uart_port *port, unsigned int cflag, */ port->timeout = (HZ * size) / baud + HZ/50; } - EXPORT_SYMBOL(uart_update_timeout); /** @@ -445,7 +444,6 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, WARN_ON(1); return 0; } - EXPORT_SYMBOL(uart_get_baud_rate); /** @@ -470,7 +468,6 @@ uart_get_divisor(struct uart_port *port, unsigned int baud) return quot; } - EXPORT_SYMBOL(uart_get_divisor); /* Caller holds port mutex */ @@ -645,6 +642,20 @@ static void uart_flush_buffer(struct tty_struct *tty) } /* + * This function performs low-level write of high-priority XON/XOFF + * character and accounting for it. + * + * Requires uart_port to implement .serial_out(). + */ +void uart_xchar_out(struct uart_port *uport, int offset) +{ + serial_port_out(uport, offset, uport->x_char); + uport->icount.tx++; + uport->x_char = 0; +} +EXPORT_SYMBOL_GPL(uart_xchar_out); + +/* * This function is used to send a high-priority XON/XOFF character to * the device */ @@ -1571,8 +1582,7 @@ static void uart_tty_port_shutdown(struct tty_port *port) state->xmit.buf = NULL; spin_unlock_irq(&uport->lock); - if (buf) - free_page((unsigned long)buf); + free_page((unsigned long)buf); uart_change_pm(state, UART_PM_STATE_OFF); } @@ -1915,7 +1925,7 @@ static void uart_port_spin_lock_init(struct uart_port *port) */ void uart_console_write(struct uart_port *port, const char *s, unsigned int count, - void (*putchar)(struct uart_port *, int)) + void (*putchar)(struct uart_port *, unsigned char)) { unsigned int i; @@ -2207,6 +2217,7 @@ unlock: return 0; } +EXPORT_SYMBOL(uart_suspend_port); int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) { @@ -2292,6 +2303,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) return 0; } +EXPORT_SYMBOL(uart_resume_port); static inline void uart_report_port(struct uart_driver *drv, struct uart_port *port) @@ -2589,6 +2601,7 @@ out_kfree: out: return retval; } +EXPORT_SYMBOL(uart_register_driver); /** * uart_unregister_driver - remove a driver from the uart core layer @@ -2612,6 +2625,7 @@ void uart_unregister_driver(struct uart_driver *drv) drv->state = NULL; drv->tty_driver = NULL; } +EXPORT_SYMBOL(uart_unregister_driver); struct tty_driver *uart_console_device(struct console *co, int *index) { @@ -2946,6 +2960,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) return ret; } +EXPORT_SYMBOL(uart_add_one_port); /** * uart_remove_one_port - detach a driver defined port structure @@ -3026,6 +3041,7 @@ out: return ret; } +EXPORT_SYMBOL(uart_remove_one_port); /* * Are the two ports equivalent? @@ -3202,14 +3218,6 @@ bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch) EXPORT_SYMBOL_GPL(uart_try_toggle_sysrq); #endif -EXPORT_SYMBOL(uart_write_wakeup); -EXPORT_SYMBOL(uart_register_driver); -EXPORT_SYMBOL(uart_unregister_driver); -EXPORT_SYMBOL(uart_suspend_port); -EXPORT_SYMBOL(uart_resume_port); -EXPORT_SYMBOL(uart_add_one_port); -EXPORT_SYMBOL(uart_remove_one_port); - /** * uart_get_rs485_mode() - retrieve rs485 properties for given uart * @port: uart device's target port diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index c41d8911ce95..1663b3afc3a0 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -299,4 +299,42 @@ void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios) } EXPORT_SYMBOL_GPL(mctrl_gpio_disable_ms); +void mctrl_gpio_enable_irq_wake(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (!gpios) + return; + + if (!gpios->mctrl_on) + return; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + enable_irq_wake(gpios->irq[i]); + } +} +EXPORT_SYMBOL_GPL(mctrl_gpio_enable_irq_wake); + +void mctrl_gpio_disable_irq_wake(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (!gpios) + return; + + if (!gpios->mctrl_on) + return; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + disable_irq_wake(gpios->irq[i]); + } +} +EXPORT_SYMBOL_GPL(mctrl_gpio_disable_irq_wake); + MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h index b134a0ffc894..fc76910fb105 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.h +++ b/drivers/tty/serial/serial_mctrl_gpio.h @@ -91,6 +91,16 @@ void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios); */ void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios); +/* + * Enable gpio wakeup interrupts to enable wake up source. + */ +void mctrl_gpio_enable_irq_wake(struct mctrl_gpios *gpios); + +/* + * Disable gpio wakeup interrupts to enable wake up source. + */ +void mctrl_gpio_disable_irq_wake(struct mctrl_gpios *gpios); + #else /* GPIOLIB */ static inline @@ -142,6 +152,14 @@ static inline void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios) { } +static inline void mctrl_gpio_enable_irq_wake(struct mctrl_gpios *gpios) +{ +} + +static inline void mctrl_gpio_disable_irq_wake(struct mctrl_gpios *gpios) +{ +} + #endif /* GPIOLIB */ #endif diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index aaca4fe38486..2213e6b841d3 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -26,9 +26,6 @@ #include <linux/io.h> -static char *serial_version = "1.11"; -static char *serial_name = "TX39/49 Serial driver"; - #define PASS_LIMIT 256 #if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) @@ -57,11 +54,6 @@ static char *serial_name = "TX39/49 Serial driver"; */ #define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS -struct uart_txx9_port { - struct uart_port port; - /* No additional info for now */ -}; - #define TXX9_REGION_SIZE 0x24 /* TXX9 Serial Registers */ @@ -163,42 +155,42 @@ struct uart_txx9_port { #define TXX9_SIBGR_BCLK_T6 0x00000300 #define TXX9_SIBGR_BRD_MASK 0x000000ff -static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) +static inline unsigned int sio_in(struct uart_port *up, int offset) { - switch (up->port.iotype) { + switch (up->iotype) { default: - return __raw_readl(up->port.membase + offset); + return __raw_readl(up->membase + offset); case UPIO_PORT: - return inl(up->port.iobase + offset); + return inl(up->iobase + offset); } } static inline void -sio_out(struct uart_txx9_port *up, int offset, int value) +sio_out(struct uart_port *up, int offset, int value) { - switch (up->port.iotype) { + switch (up->iotype) { default: - __raw_writel(value, up->port.membase + offset); + __raw_writel(value, up->membase + offset); break; case UPIO_PORT: - outl(value, up->port.iobase + offset); + outl(value, up->iobase + offset); break; } } static inline void -sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) +sio_mask(struct uart_port *up, int offset, unsigned int value) { sio_out(up, offset, sio_in(up, offset) & ~value); } static inline void -sio_set(struct uart_txx9_port *up, int offset, unsigned int value) +sio_set(struct uart_port *up, int offset, unsigned int value) { sio_out(up, offset, sio_in(up, offset) | value); } static inline void -sio_quot_set(struct uart_txx9_port *up, int quot) +sio_quot_set(struct uart_port *up, int quot) { quot >>= 1; if (quot < 256) @@ -213,32 +205,23 @@ sio_quot_set(struct uart_txx9_port *up, int quot) sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); } -static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) -{ - return container_of(port, struct uart_txx9_port, port); -} - -static void serial_txx9_stop_tx(struct uart_port *port) +static void serial_txx9_stop_tx(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); } -static void serial_txx9_start_tx(struct uart_port *port) +static void serial_txx9_start_tx(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); } -static void serial_txx9_stop_rx(struct uart_port *port) +static void serial_txx9_stop_rx(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); - up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; + up->read_status_mask &= ~TXX9_SIDISR_RDIS; } -static void serial_txx9_initialize(struct uart_port *port) +static void serial_txx9_initialize(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned int tmout = 10000; sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); @@ -253,15 +236,15 @@ static void serial_txx9_initialize(struct uart_port *port) /* initial settings */ sio_out(up, TXX9_SILCR, TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | - ((up->port.flags & UPF_TXX9_USE_SCLK) ? + ((up->flags & UPF_TXX9_USE_SCLK) ? TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); - sio_quot_set(up, uart_get_divisor(port, 9600)); + sio_quot_set(up, uart_get_divisor(up, 9600)); sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); sio_out(up, TXX9_SIDICR, 0); } static inline void -receive_chars(struct uart_txx9_port *up, unsigned int *status) +receive_chars(struct uart_port *up, unsigned int *status) { unsigned char ch; unsigned int disr = *status; @@ -272,11 +255,11 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status) do { ch = sio_in(up, TXX9_SIRFIFO); flag = TTY_NORMAL; - up->port.icount.rx++; + up->icount.rx++; /* mask out RFDN_MASK bit added by previous overrun */ next_ignore_status_mask = - up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; + up->ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { /* @@ -284,21 +267,21 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status) */ if (disr & TXX9_SIDISR_UBRK) { disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); - up->port.icount.brk++; + up->icount.brk++; /* * We do the SysRQ and SAK checking * here because otherwise the break * may get masked by ignore_status_mask * or read_status_mask. */ - if (uart_handle_break(&up->port)) + if (uart_handle_break(up)) goto ignore_char; } else if (disr & TXX9_SIDISR_UPER) - up->port.icount.parity++; + up->icount.parity++; else if (disr & TXX9_SIDISR_UFER) - up->port.icount.frame++; + up->icount.frame++; if (disr & TXX9_SIDISR_UOER) { - up->port.icount.overrun++; + up->icount.overrun++; /* * The receiver read buffer still hold * a char which caused overrun. @@ -312,7 +295,7 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status) /* * Mask off conditions which should be ingored. */ - disr &= up->port.read_status_mask; + disr &= up->read_status_mask; if (disr & TXX9_SIDISR_UBRK) { flag = TTY_BREAK; @@ -321,34 +304,34 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status) else if (disr & TXX9_SIDISR_UFER) flag = TTY_FRAME; } - if (uart_handle_sysrq_char(&up->port, ch)) + if (uart_handle_sysrq_char(up, ch)) goto ignore_char; - uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); + uart_insert_char(up, disr, TXX9_SIDISR_UOER, ch, flag); ignore_char: - up->port.ignore_status_mask = next_ignore_status_mask; + up->ignore_status_mask = next_ignore_status_mask; disr = sio_in(up, TXX9_SIDISR); } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); - tty_flip_buffer_push(&up->port.state->port); + tty_flip_buffer_push(&up->state->port); *status = disr; } -static inline void transmit_chars(struct uart_txx9_port *up) +static inline void transmit_chars(struct uart_port *up) { - struct circ_buf *xmit = &up->port.state->xmit; + struct circ_buf *xmit = &up->state->xmit; int count; - if (up->port.x_char) { - sio_out(up, TXX9_SITFIFO, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; + if (up->x_char) { + sio_out(up, TXX9_SITFIFO, up->x_char); + up->icount.tx++; + up->x_char = 0; return; } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_txx9_stop_tx(&up->port); + if (uart_circ_empty(xmit) || uart_tx_stopped(up)) { + serial_txx9_stop_tx(up); return; } @@ -356,32 +339,32 @@ static inline void transmit_chars(struct uart_txx9_port *up) do { sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; + up->icount.tx++; if (uart_circ_empty(xmit)) break; } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); + uart_write_wakeup(up); if (uart_circ_empty(xmit)) - serial_txx9_stop_tx(&up->port); + serial_txx9_stop_tx(up); } static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) { int pass_counter = 0; - struct uart_txx9_port *up = dev_id; + struct uart_port *up = dev_id; unsigned int status; while (1) { - spin_lock(&up->port.lock); + spin_lock(&up->lock); status = sio_in(up, TXX9_SIDISR); if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) status &= ~TXX9_SIDISR_TDIS; if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | TXX9_SIDISR_TOUT))) { - spin_unlock(&up->port.lock); + spin_unlock(&up->lock); break; } @@ -393,7 +376,7 @@ static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | TXX9_SIDISR_TOUT); - spin_unlock(&up->port.lock); + spin_unlock(&up->lock); if (pass_counter++ > PASS_LIMIT) break; @@ -402,22 +385,20 @@ static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) return pass_counter ? IRQ_HANDLED : IRQ_NONE; } -static unsigned int serial_txx9_tx_empty(struct uart_port *port) +static unsigned int serial_txx9_tx_empty(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; unsigned int ret; - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&up->lock, flags); ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock_irqrestore(&up->lock, flags); return ret; } -static unsigned int serial_txx9_get_mctrl(struct uart_port *port) +static unsigned int serial_txx9_get_mctrl(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned int ret; /* no modem control lines */ @@ -428,9 +409,8 @@ static unsigned int serial_txx9_get_mctrl(struct uart_port *port) return ret; } -static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) +static void serial_txx9_set_mctrl(struct uart_port *up, unsigned int mctrl) { - struct uart_txx9_port *up = to_uart_txx9_port(port); if (mctrl & TIOCM_RTS) sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); @@ -438,24 +418,23 @@ static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); } -static void serial_txx9_break_ctl(struct uart_port *port, int break_state) +static void serial_txx9_break_ctl(struct uart_port *up, int break_state) { - struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&up->lock, flags); if (break_state == -1) sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); else sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock_irqrestore(&up->lock, flags); } #if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL) /* * Wait for transmitter & holding register to empty */ -static void wait_for_xmitr(struct uart_txx9_port *up) +static void wait_for_xmitr(struct uart_port *up) { unsigned int tmout = 10000; @@ -465,7 +444,7 @@ static void wait_for_xmitr(struct uart_txx9_port *up) udelay(1); /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { + if (up->flags & UPF_CONS_FLOW) { tmout = 1000000; while (--tmout && (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) @@ -480,11 +459,10 @@ static void wait_for_xmitr(struct uart_txx9_port *up) * in an interrupt or debug context. */ -static int serial_txx9_get_poll_char(struct uart_port *port) +static int serial_txx9_get_poll_char(struct uart_port *up) { unsigned int ier; unsigned char c; - struct uart_txx9_port *up = to_uart_txx9_port(port); /* * First save the IER then disable the interrupts @@ -507,10 +485,9 @@ static int serial_txx9_get_poll_char(struct uart_port *port) } -static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) +static void serial_txx9_put_poll_char(struct uart_port *up, unsigned char c) { unsigned int ier; - struct uart_txx9_port *up = to_uart_txx9_port(port); /* * First save the IER then disable the interrupts @@ -534,9 +511,8 @@ static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) #endif /* CONFIG_CONSOLE_POLL */ -static int serial_txx9_startup(struct uart_port *port) +static int serial_txx9_startup(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; int retval; @@ -556,7 +532,7 @@ static int serial_txx9_startup(struct uart_port *port) */ sio_out(up, TXX9_SIDISR, 0); - retval = request_irq(up->port.irq, serial_txx9_interrupt, + retval = request_irq(up->irq, serial_txx9_interrupt, IRQF_SHARED, "serial_txx9", up); if (retval) return retval; @@ -564,9 +540,9 @@ static int serial_txx9_startup(struct uart_port *port) /* * Now, initialize the UART */ - spin_lock_irqsave(&up->port.lock, flags); - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); + spin_lock_irqsave(&up->lock, flags); + serial_txx9_set_mctrl(up, up->mctrl); + spin_unlock_irqrestore(&up->lock, flags); /* Enable RX/TX */ sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); @@ -579,9 +555,8 @@ static int serial_txx9_startup(struct uart_port *port) return 0; } -static void serial_txx9_shutdown(struct uart_port *port) +static void serial_txx9_shutdown(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; /* @@ -589,9 +564,9 @@ static void serial_txx9_shutdown(struct uart_port *port) */ sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ - spin_lock_irqsave(&up->port.lock, flags); - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); + spin_lock_irqsave(&up->lock, flags); + serial_txx9_set_mctrl(up, up->mctrl); + spin_unlock_irqrestore(&up->lock, flags); /* * Disable break condition @@ -599,8 +574,8 @@ static void serial_txx9_shutdown(struct uart_port *port) sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); #ifdef CONFIG_SERIAL_TXX9_CONSOLE - if (up->port.cons && up->port.line == up->port.cons->index) { - free_irq(up->port.irq, up); + if (up->cons && up->line == up->cons->index) { + free_irq(up->irq, up); return; } #endif @@ -614,14 +589,13 @@ static void serial_txx9_shutdown(struct uart_port *port) /* Disable RX/TX */ sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); - free_irq(up->port.irq, up); + free_irq(up->irq, up); } static void -serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, +serial_txx9_set_termios(struct uart_port *up, struct ktermios *termios, struct ktermios *old) { - struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned int cval, fcr = 0; unsigned long flags; unsigned int baud, quot; @@ -661,8 +635,8 @@ serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, /* * Ask the core to calculate the divisor for us. */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); - quot = uart_get_divisor(port, baud); + baud = uart_get_baud_rate(up, termios, old, 0, up->uartclk/16/2); + quot = uart_get_divisor(up, baud); /* Set up FIFOs */ /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ @@ -672,45 +646,45 @@ serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, * Ok, we're now changing the port state. Do it with * interrupts disabled. */ - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&up->lock, flags); /* * Update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, baud); + uart_update_timeout(up, termios->c_cflag, baud); - up->port.read_status_mask = TXX9_SIDISR_UOER | + up->read_status_mask = TXX9_SIDISR_UOER | TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; if (termios->c_iflag & INPCK) - up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; + up->read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - up->port.read_status_mask |= TXX9_SIDISR_UBRK; + up->read_status_mask |= TXX9_SIDISR_UBRK; /* * Characteres to ignore */ - up->port.ignore_status_mask = 0; + up->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; + up->ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; + up->ignore_status_mask |= TXX9_SIDISR_UBRK; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= TXX9_SIDISR_UOER; + up->ignore_status_mask |= TXX9_SIDISR_UOER; } /* * ignore all characters if CREAD is not set */ if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; + up->ignore_status_mask |= TXX9_SIDISR_RDIS; /* CTS flow control flag */ if ((termios->c_cflag & CRTSCTS) && - (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { + (up->flags & UPF_TXX9_HAVE_CTS_LINE)) { sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); } else { @@ -722,8 +696,8 @@ serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, sio_quot_set(up, quot); sio_out(up, TXX9_SIFCR, fcr); - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); + serial_txx9_set_mctrl(up, up->mctrl); + spin_unlock_irqrestore(&up->lock, flags); } static void @@ -742,76 +716,73 @@ serial_txx9_pm(struct uart_port *port, unsigned int state, serial_txx9_initialize(port); } -static int serial_txx9_request_resource(struct uart_txx9_port *up) +static int serial_txx9_request_resource(struct uart_port *up) { unsigned int size = TXX9_REGION_SIZE; int ret = 0; - switch (up->port.iotype) { + switch (up->iotype) { default: - if (!up->port.mapbase) + if (!up->mapbase) break; - if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { + if (!request_mem_region(up->mapbase, size, "serial_txx9")) { ret = -EBUSY; break; } - if (up->port.flags & UPF_IOREMAP) { - up->port.membase = ioremap(up->port.mapbase, size); - if (!up->port.membase) { - release_mem_region(up->port.mapbase, size); + if (up->flags & UPF_IOREMAP) { + up->membase = ioremap(up->mapbase, size); + if (!up->membase) { + release_mem_region(up->mapbase, size); ret = -ENOMEM; } } break; case UPIO_PORT: - if (!request_region(up->port.iobase, size, "serial_txx9")) + if (!request_region(up->iobase, size, "serial_txx9")) ret = -EBUSY; break; } return ret; } -static void serial_txx9_release_resource(struct uart_txx9_port *up) +static void serial_txx9_release_resource(struct uart_port *up) { unsigned int size = TXX9_REGION_SIZE; - switch (up->port.iotype) { + switch (up->iotype) { default: - if (!up->port.mapbase) + if (!up->mapbase) break; - if (up->port.flags & UPF_IOREMAP) { - iounmap(up->port.membase); - up->port.membase = NULL; + if (up->flags & UPF_IOREMAP) { + iounmap(up->membase); + up->membase = NULL; } - release_mem_region(up->port.mapbase, size); + release_mem_region(up->mapbase, size); break; case UPIO_PORT: - release_region(up->port.iobase, size); + release_region(up->iobase, size); break; } } -static void serial_txx9_release_port(struct uart_port *port) +static void serial_txx9_release_port(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); serial_txx9_release_resource(up); } -static int serial_txx9_request_port(struct uart_port *port) +static int serial_txx9_request_port(struct uart_port *up) { - struct uart_txx9_port *up = to_uart_txx9_port(port); return serial_txx9_request_resource(up); } -static void serial_txx9_config_port(struct uart_port *port, int uflags) +static void serial_txx9_config_port(struct uart_port *up, int uflags) { - struct uart_txx9_port *up = to_uart_txx9_port(port); int ret; /* @@ -821,14 +792,14 @@ static void serial_txx9_config_port(struct uart_port *port, int uflags) ret = serial_txx9_request_resource(up); if (ret < 0) return; - port->type = PORT_TXX9; - up->port.fifosize = TXX9_SIO_TX_FIFO; + up->type = PORT_TXX9; + up->fifosize = TXX9_SIO_TX_FIFO; #ifdef CONFIG_SERIAL_TXX9_CONSOLE - if (up->port.line == up->port.cons->index) + if (up->line == up->cons->index) return; #endif - serial_txx9_initialize(port); + serial_txx9_initialize(up); } static const char * @@ -859,7 +830,7 @@ static const struct uart_ops serial_txx9_pops = { #endif }; -static struct uart_txx9_port serial_txx9_ports[UART_NR]; +static struct uart_port serial_txx9_ports[UART_NR]; static void __init serial_txx9_register_ports(struct uart_driver *drv, struct device *dev) @@ -867,22 +838,20 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv, int i; for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; + struct uart_port *up = &serial_txx9_ports[i]; - up->port.line = i; - up->port.ops = &serial_txx9_pops; - up->port.dev = dev; - if (up->port.iobase || up->port.mapbase) - uart_add_one_port(drv, &up->port); + up->line = i; + up->ops = &serial_txx9_pops; + up->dev = dev; + if (up->iobase || up->mapbase) + uart_add_one_port(drv, up); } } #ifdef CONFIG_SERIAL_TXX9_CONSOLE -static void serial_txx9_console_putchar(struct uart_port *port, int ch) +static void serial_txx9_console_putchar(struct uart_port *up, unsigned char ch) { - struct uart_txx9_port *up = to_uart_txx9_port(port); - wait_for_xmitr(up); sio_out(up, TXX9_SITFIFO, ch); } @@ -896,7 +865,7 @@ static void serial_txx9_console_putchar(struct uart_port *port, int ch) static void serial_txx9_console_write(struct console *co, const char *s, unsigned int count) { - struct uart_txx9_port *up = &serial_txx9_ports[co->index]; + struct uart_port *up = &serial_txx9_ports[co->index]; unsigned int ier, flcr; /* @@ -908,10 +877,10 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count) * Disable flow-control if enabled (and unnecessary) */ flcr = sio_in(up, TXX9_SIFLCR); - if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) + if (!(up->flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); - uart_console_write(&up->port, s, count, serial_txx9_console_putchar); + uart_console_write(up, s, count, serial_txx9_console_putchar); /* * Finally, wait for transmitter to become empty @@ -924,8 +893,7 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count) static int __init serial_txx9_console_setup(struct console *co, char *options) { - struct uart_port *port; - struct uart_txx9_port *up; + struct uart_port *up; int baud = 9600; int bits = 8; int parity = 'n'; @@ -939,16 +907,15 @@ static int __init serial_txx9_console_setup(struct console *co, char *options) if (co->index >= UART_NR) co->index = 0; up = &serial_txx9_ports[co->index]; - port = &up->port; - if (!port->ops) + if (!up->ops) return -ENODEV; - serial_txx9_initialize(&up->port); + serial_txx9_initialize(up); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(port, co, baud, parity, bits, flow); + return uart_set_options(up, co, baud, parity, bits, flow); } static struct uart_driver serial_txx9_reg; @@ -989,9 +956,9 @@ int __init early_serial_txx9_setup(struct uart_port *port) if (port->line >= ARRAY_SIZE(serial_txx9_ports)) return -ENODEV; - serial_txx9_ports[port->line].port = *port; - serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; - serial_txx9_ports[port->line].port.flags |= + serial_txx9_ports[port->line] = *port; + serial_txx9_ports[port->line].ops = &serial_txx9_pops; + serial_txx9_ports[port->line].flags |= UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; return 0; } @@ -1012,14 +979,14 @@ static DEFINE_MUTEX(serial_txx9_mutex); static int serial_txx9_register_port(struct uart_port *port) { int i; - struct uart_txx9_port *uart; + struct uart_port *uart; int ret = -ENOSPC; mutex_lock(&serial_txx9_mutex); for (i = 0; i < UART_NR; i++) { uart = &serial_txx9_ports[i]; - if (uart_match_port(&uart->port, port)) { - uart_remove_one_port(&serial_txx9_reg, &uart->port); + if (uart_match_port(uart, port)) { + uart_remove_one_port(&serial_txx9_reg, uart); break; } } @@ -1027,24 +994,24 @@ static int serial_txx9_register_port(struct uart_port *port) /* Find unused port */ for (i = 0; i < UART_NR; i++) { uart = &serial_txx9_ports[i]; - if (!(uart->port.iobase || uart->port.mapbase)) + if (!(uart->iobase || uart->mapbase)) break; } } if (i < UART_NR) { - uart->port.iobase = port->iobase; - uart->port.membase = port->membase; - uart->port.irq = port->irq; - uart->port.uartclk = port->uartclk; - uart->port.iotype = port->iotype; - uart->port.flags = port->flags + uart->iobase = port->iobase; + uart->membase = port->membase; + uart->irq = port->irq; + uart->uartclk = port->uartclk; + uart->iotype = port->iotype; + uart->flags = port->flags | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; - uart->port.mapbase = port->mapbase; + uart->mapbase = port->mapbase; if (port->dev) - uart->port.dev = port->dev; - ret = uart_add_one_port(&serial_txx9_reg, &uart->port); + uart->dev = port->dev; + ret = uart_add_one_port(&serial_txx9_reg, uart); if (ret == 0) - ret = uart->port.line; + ret = uart->line; } mutex_unlock(&serial_txx9_mutex); return ret; @@ -1059,16 +1026,16 @@ static int serial_txx9_register_port(struct uart_port *port) */ static void serial_txx9_unregister_port(int line) { - struct uart_txx9_port *uart = &serial_txx9_ports[line]; + struct uart_port *uart = &serial_txx9_ports[line]; mutex_lock(&serial_txx9_mutex); - uart_remove_one_port(&serial_txx9_reg, &uart->port); - uart->port.flags = 0; - uart->port.type = PORT_UNKNOWN; - uart->port.iobase = 0; - uart->port.mapbase = 0; - uart->port.membase = NULL; - uart->port.dev = NULL; + uart_remove_one_port(&serial_txx9_reg, uart); + uart->flags = 0; + uart->type = PORT_UNKNOWN; + uart->iobase = 0; + uart->mapbase = 0; + uart->membase = NULL; + uart->dev = NULL; mutex_unlock(&serial_txx9_mutex); } @@ -1111,9 +1078,9 @@ static int serial_txx9_remove(struct platform_device *dev) int i; for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; + struct uart_port *up = &serial_txx9_ports[i]; - if (up->port.dev == &dev->dev) + if (up->dev == &dev->dev) serial_txx9_unregister_port(i); } return 0; @@ -1125,10 +1092,10 @@ static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) int i; for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; + struct uart_port *up = &serial_txx9_ports[i]; - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_suspend_port(&serial_txx9_reg, &up->port); + if (up->type != PORT_UNKNOWN && up->dev == &dev->dev) + uart_suspend_port(&serial_txx9_reg, up); } return 0; @@ -1139,10 +1106,10 @@ static int serial_txx9_resume(struct platform_device *dev) int i; for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; + struct uart_port *up = &serial_txx9_ports[i]; - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_resume_port(&serial_txx9_reg, &up->port); + if (up->type != PORT_UNKNOWN && up->dev == &dev->dev) + uart_resume_port(&serial_txx9_reg, up); } return 0; @@ -1198,10 +1165,10 @@ pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) static void pciserial_txx9_remove_one(struct pci_dev *dev) { - struct uart_txx9_port *up = pci_get_drvdata(dev); + struct uart_port *up = pci_get_drvdata(dev); if (up) { - serial_txx9_unregister_port(up->port.line); + serial_txx9_unregister_port(up->line); pci_disable_device(dev); } } @@ -1209,10 +1176,10 @@ static void pciserial_txx9_remove_one(struct pci_dev *dev) #ifdef CONFIG_PM static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) { - struct uart_txx9_port *up = pci_get_drvdata(dev); + struct uart_port *up = pci_get_drvdata(dev); if (up) - uart_suspend_port(&serial_txx9_reg, &up->port); + uart_suspend_port(&serial_txx9_reg, up); pci_save_state(dev); pci_set_power_state(dev, pci_choose_state(dev, state)); return 0; @@ -1220,12 +1187,12 @@ static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) static int pciserial_txx9_resume_one(struct pci_dev *dev) { - struct uart_txx9_port *up = pci_get_drvdata(dev); + struct uart_port *up = pci_get_drvdata(dev); pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); if (up) - uart_resume_port(&serial_txx9_reg, &up->port); + uart_resume_port(&serial_txx9_reg, up); return 0; } #endif @@ -1255,8 +1222,6 @@ static int __init serial_txx9_init(void) { int ret; - printk(KERN_INFO "%s version %s\n", serial_name, serial_version); - ret = uart_register_driver(&serial_txx9_reg); if (ret) goto out; @@ -1307,9 +1272,9 @@ static void __exit serial_txx9_exit(void) platform_driver_unregister(&serial_txx9_plat_driver); platform_device_unregister(serial_txx9_plat_devs); for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - if (up->port.iobase || up->port.mapbase) - uart_remove_one_port(&serial_txx9_reg, &up->port); + struct uart_port *up = &serial_txx9_ports[i]; + if (up->iobase || up->mapbase) + uart_remove_one_port(&serial_txx9_reg, up); } uart_unregister_driver(&serial_txx9_reg); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 968967d722d4..0f9b8bd23500 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2293,7 +2293,7 @@ static int sci_scbrr_calc(struct sci_port *s, unsigned int bps, for_each_sr(sr, s) { for (c = 0; c <= 3; c++) { /* integerized formulas from HSCIF documentation */ - prediv = sr * (1 << (2 * c + 1)); + prediv = sr << (2 * c + 1); /* * We need to calculate: @@ -2960,7 +2960,7 @@ static void sci_cleanup_single(struct sci_port *port) #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \ defined(CONFIG_SERIAL_SH_SCI_EARLYCON) -static void serial_console_putchar(struct uart_port *port, int ch) +static void serial_console_putchar(struct uart_port *port, unsigned char ch) { sci_poll_put_char(port, ch); } diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index b79900d0e91a..f5ac14c384c4 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -756,7 +756,7 @@ static void sifive_serial_poll_put_char(struct uart_port *port, */ #ifdef CONFIG_SERIAL_EARLYCON -static void early_sifive_serial_putc(struct uart_port *port, int c) +static void early_sifive_serial_putc(struct uart_port *port, unsigned char c) { while (__ssp_early_readl(port, SIFIVE_SERIAL_TXDATA_OFFS) & SIFIVE_SERIAL_TXDATA_FULL_MASK) @@ -800,7 +800,7 @@ OF_EARLYCON_DECLARE(sifive, "sifive,fu540-c000-uart0", static struct sifive_serial_port *sifive_serial_console_ports[SIFIVE_SERIAL_MAX_PORTS]; -static void sifive_serial_console_putchar(struct uart_port *port, int ch) +static void sifive_serial_console_putchar(struct uart_port *port, unsigned char ch) { struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 9a7ae6384edf..4329b9c9cbf0 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -984,7 +984,7 @@ static void wait_for_xmitr(struct uart_port *port) } while (status & SPRD_TX_FIFO_CNT_MASK); } -static void sprd_console_putchar(struct uart_port *port, int ch) +static void sprd_console_putchar(struct uart_port *port, unsigned char ch) { wait_for_xmitr(port); serial_out(port, SPRD_TXD, ch); @@ -1058,7 +1058,7 @@ console_initcall(sprd_serial_console_init); #define SPRD_CONSOLE (&sprd_console) /* Support for earlycon */ -static void sprd_putc(struct uart_port *port, int c) +static void sprd_putc(struct uart_port *port, unsigned char c) { unsigned int timeout = SPRD_TIMEOUT; diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 87e480cc8206..d7fd692286cf 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -854,7 +854,7 @@ static int asc_serial_resume(struct device *dev) /*----------------------------------------------------------------------*/ #ifdef CONFIG_SERIAL_ST_ASC_CONSOLE -static void asc_console_putchar(struct uart_port *port, int ch) +static void asc_console_putchar(struct uart_port *port, unsigned char ch) { unsigned int timeout = 1000000; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 9570002d07e7..87b5cd4c9743 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -1641,7 +1641,7 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) } #ifdef CONFIG_SERIAL_STM32_CONSOLE -static void stm32_usart_console_putchar(struct uart_port *port, int ch) +static void stm32_usart_console_putchar(struct uart_port *port, unsigned char ch) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -1756,6 +1756,7 @@ static int __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port, if (enable) { stm32_usart_set_bits(port, ofs->cr1, USART_CR1_UESM); stm32_usart_set_bits(port, ofs->cr3, USART_CR3_WUFIE); + mctrl_gpio_enable_irq_wake(stm32_port->gpios); /* * When DMA is used for reception, it must be disabled before @@ -1782,7 +1783,7 @@ static int __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port, if (ret) return ret; } - + mctrl_gpio_disable_irq_wake(stm32_port->gpios); stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_UESM); stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); } diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c new file mode 100644 index 000000000000..9f15922e681b --- /dev/null +++ b/drivers/tty/serial/sunplus-uart.c @@ -0,0 +1,775 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sunplus SoC UART driver + * + * Author: Hammer Hsieh <hammerh0314@gmail.com> + * + * Note1: This driver is 8250-like uart, but are not register compatible. + * + * Note2: On some buses, for preventing data incoherence, must do a read + * for ensure write made it to hardware. In this driver, function startup + * and shutdown did not do a read but only do a write directly. For what? + * In Sunplus bus communication between memory bus and peripheral bus with + * posted write, it will send a specific command after last write command + * to make sure write done. Then memory bus identify the specific command + * and send done signal back to master device. After master device received + * done signal, then proceed next write command. It is no need to do a read + * before write. + */ +#include <linux/clk.h> +#include <linux/console.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/serial_core.h> +#include <linux/serial_reg.h> +#include <linux/sysrq.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <asm/irq.h> + +/* Register offsets */ +#define SUP_UART_DATA 0x00 +#define SUP_UART_LSR 0x04 +#define SUP_UART_MSR 0x08 +#define SUP_UART_LCR 0x0C +#define SUP_UART_MCR 0x10 +#define SUP_UART_DIV_L 0x14 +#define SUP_UART_DIV_H 0x18 +#define SUP_UART_ISC 0x1C +#define SUP_UART_TX_RESIDUE 0x20 +#define SUP_UART_RX_RESIDUE 0x24 + +/* Line Status Register bits */ +#define SUP_UART_LSR_BC BIT(5) /* break condition status */ +#define SUP_UART_LSR_FE BIT(4) /* frame error status */ +#define SUP_UART_LSR_OE BIT(3) /* overrun error status */ +#define SUP_UART_LSR_PE BIT(2) /* parity error status */ +#define SUP_UART_LSR_RX BIT(1) /* 1: receive fifo not empty */ +#define SUP_UART_LSR_TX BIT(0) /* 1: transmit fifo is not full */ +#define SUP_UART_LSR_TX_NOT_FULL 1 +#define SUP_UART_LSR_BRK_ERROR_BITS GENMASK(5, 2) + +/* Line Control Register bits */ +#define SUP_UART_LCR_SBC BIT(5) /* select break condition */ + +/* Modem Control Register bits */ +#define SUP_UART_MCR_RI BIT(3) /* ring indicator */ +#define SUP_UART_MCR_DCD BIT(2) /* data carrier detect */ + +/* Interrupt Status/Control Register bits */ +#define SUP_UART_ISC_RXM BIT(5) /* RX interrupt enable */ +#define SUP_UART_ISC_TXM BIT(4) /* TX interrupt enable */ +#define SUP_UART_ISC_RX BIT(1) /* RX interrupt status */ +#define SUP_UART_ISC_TX BIT(0) /* TX interrupt status */ + +#define SUP_DUMMY_READ BIT(16) /* drop bytes received on a !CREAD port */ +#define SUP_UART_NR 5 + +struct sunplus_uart_port { + struct uart_port port; + struct clk *clk; + struct reset_control *rstc; +}; + +static void sp_uart_put_char(struct uart_port *port, unsigned int ch) +{ + writel(ch, port->membase + SUP_UART_DATA); +} + +static u32 sunplus_tx_buf_not_full(struct uart_port *port) +{ + unsigned int lsr = readl(port->membase + SUP_UART_LSR); + + return (lsr & SUP_UART_LSR_TX) ? SUP_UART_LSR_TX_NOT_FULL : 0; +} + +static unsigned int sunplus_tx_empty(struct uart_port *port) +{ + unsigned int lsr = readl(port->membase + SUP_UART_LSR); + + return (lsr & UART_LSR_TEMT) ? TIOCSER_TEMT : 0; +} + +static void sunplus_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int mcr = readl(port->membase + SUP_UART_MCR); + + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + else + mcr &= ~UART_MCR_DTR; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + else + mcr &= ~UART_MCR_RTS; + + if (mctrl & TIOCM_CAR) + mcr |= SUP_UART_MCR_DCD; + else + mcr &= ~SUP_UART_MCR_DCD; + + if (mctrl & TIOCM_RI) + mcr |= SUP_UART_MCR_RI; + else + mcr &= ~SUP_UART_MCR_RI; + + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + else + mcr &= ~UART_MCR_LOOP; + + writel(mcr, port->membase + SUP_UART_MCR); +} + +static unsigned int sunplus_get_mctrl(struct uart_port *port) +{ + unsigned int mcr, ret = 0; + + mcr = readl(port->membase + SUP_UART_MCR); + + if (mcr & UART_MCR_DTR) + ret |= TIOCM_DTR; + + if (mcr & UART_MCR_RTS) + ret |= TIOCM_RTS; + + if (mcr & SUP_UART_MCR_DCD) + ret |= TIOCM_CAR; + + if (mcr & SUP_UART_MCR_RI) + ret |= TIOCM_RI; + + if (mcr & UART_MCR_LOOP) + ret |= TIOCM_LOOP; + + return ret; +} + +static void sunplus_stop_tx(struct uart_port *port) +{ + unsigned int isc; + + isc = readl(port->membase + SUP_UART_ISC); + isc &= ~SUP_UART_ISC_TXM; + writel(isc, port->membase + SUP_UART_ISC); +} + +static void sunplus_start_tx(struct uart_port *port) +{ + unsigned int isc; + + isc = readl(port->membase + SUP_UART_ISC); + isc |= SUP_UART_ISC_TXM; + writel(isc, port->membase + SUP_UART_ISC); +} + +static void sunplus_stop_rx(struct uart_port *port) +{ + unsigned int isc; + + isc = readl(port->membase + SUP_UART_ISC); + isc &= ~SUP_UART_ISC_RXM; + writel(isc, port->membase + SUP_UART_ISC); +} + +static void sunplus_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + unsigned int lcr; + + spin_lock_irqsave(&port->lock, flags); + + lcr = readl(port->membase + SUP_UART_LCR); + + if (ctl) + lcr |= SUP_UART_LCR_SBC; /* start break */ + else + lcr &= ~SUP_UART_LCR_SBC; /* stop break */ + + writel(lcr, port->membase + SUP_UART_LCR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + sp_uart_put_char(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + sunplus_stop_tx(port); + return; + } + + do { + sp_uart_put_char(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) % UART_XMIT_SIZE; + port->icount.tx++; + + if (uart_circ_empty(xmit)) + break; + } while (sunplus_tx_buf_not_full(port)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + sunplus_stop_tx(port); +} + +static void receive_chars(struct uart_port *port) +{ + unsigned int lsr = readl(port->membase + SUP_UART_LSR); + unsigned int ch, flag; + + do { + ch = readl(port->membase + SUP_UART_DATA); + flag = TTY_NORMAL; + port->icount.rx++; + + if (unlikely(lsr & SUP_UART_LSR_BRK_ERROR_BITS)) { + if (lsr & SUP_UART_LSR_BC) { + lsr &= ~(SUP_UART_LSR_FE | SUP_UART_LSR_PE); + port->icount.brk++; + flag = TTY_BREAK; + if (uart_handle_break(port)) + goto ignore_char; + } else if (lsr & SUP_UART_LSR_PE) { + port->icount.parity++; + flag = TTY_PARITY; + } else if (lsr & SUP_UART_LSR_FE) { + port->icount.frame++; + flag = TTY_FRAME; + } + + if (lsr & SUP_UART_LSR_OE) + port->icount.overrun++; + } + + if (port->ignore_status_mask & SUP_DUMMY_READ) + goto ignore_char; + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, lsr, SUP_UART_LSR_OE, ch, flag); + +ignore_char: + lsr = readl(port->membase + SUP_UART_LSR); + } while (lsr & SUP_UART_LSR_RX); + + tty_flip_buffer_push(&port->state->port); +} + +static irqreturn_t sunplus_uart_irq(int irq, void *args) +{ + struct uart_port *port = args; + unsigned int isc; + + spin_lock(&port->lock); + + isc = readl(port->membase + SUP_UART_ISC); + + if (isc & SUP_UART_ISC_RX) + receive_chars(port); + + if (isc & SUP_UART_ISC_TX) + transmit_chars(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static int sunplus_startup(struct uart_port *port) +{ + unsigned long flags; + unsigned int isc = 0; + int ret; + + ret = request_irq(port->irq, sunplus_uart_irq, 0, "sunplus_uart", port); + if (ret) + return ret; + + spin_lock_irqsave(&port->lock, flags); + /* isc define Bit[7:4] int setting, Bit[3:0] int status + * isc register will clean Bit[3:0] int status after read + * only do a write to Bit[7:4] int setting + */ + isc |= SUP_UART_ISC_RXM; + writel(isc, port->membase + SUP_UART_ISC); + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void sunplus_shutdown(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + /* isc define Bit[7:4] int setting, Bit[3:0] int status + * isc register will clean Bit[3:0] int status after read + * only do a write to Bit[7:4] int setting + */ + writel(0, port->membase + SUP_UART_ISC); /* disable all interrupt */ + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +static void sunplus_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *oldtermios) +{ + u32 ext, div, div_l, div_h, baud, lcr; + u32 clk = port->uartclk; + unsigned long flags; + + baud = uart_get_baud_rate(port, termios, oldtermios, 0, port->uartclk / 16); + + /* baud rate = uartclk / ((16 * divisor + 1) + divisor_ext) */ + clk += baud >> 1; + div = clk / baud; + ext = div & 0x0F; + div = (div >> 4) - 1; + div_l = (div & 0xFF) | (ext << 12); + div_h = div >> 8; + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr = UART_LCR_WLEN5; + break; + case CS6: + lcr = UART_LCR_WLEN6; + break; + case CS7: + lcr = UART_LCR_WLEN7; + break; + default: + lcr = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + + if (termios->c_cflag & PARENB) { + lcr |= UART_LCR_PARITY; + + if (!(termios->c_cflag & PARODD)) + lcr |= UART_LCR_EPAR; + } + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = 0; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SUP_UART_LSR_PE | SUP_UART_LSR_FE; + + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SUP_UART_LSR_BC; + + /* Characters to ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SUP_UART_LSR_FE | SUP_UART_LSR_PE; + + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= SUP_UART_LSR_BC; + + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SUP_UART_LSR_OE; + } + + /* Ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) { + port->ignore_status_mask |= SUP_DUMMY_READ; + /* flush rx data FIFO */ + writel(0, port->membase + SUP_UART_RX_RESIDUE); + } + + /* Settings for baud rate divisor and lcr */ + writel(div_h, port->membase + SUP_UART_DIV_H); + writel(div_l, port->membase + SUP_UART_DIV_L); + writel(lcr, port->membase + SUP_UART_LCR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void sunplus_set_ldisc(struct uart_port *port, struct ktermios *termios) +{ + int new = termios->c_line; + + if (new == N_PPS) + port->flags |= UPF_HARDPPS_CD; + else + port->flags &= ~UPF_HARDPPS_CD; +} + +static const char *sunplus_type(struct uart_port *port) +{ + return port->type == PORT_SUNPLUS ? "sunplus_uart" : NULL; +} + +static void sunplus_config_port(struct uart_port *port, int type) +{ + if (type & UART_CONFIG_TYPE) + port->type = PORT_SUNPLUS; +} + +static int sunplus_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_SUNPLUS) + return -EINVAL; + + return 0; +} + +#if defined(CONFIG_SERIAL_SUNPLUS_CONSOLE) || defined(CONFIG_CONSOLE_POLL) +static void wait_for_xmitr(struct uart_port *port) +{ + unsigned int val; + int ret; + + /* Wait while FIFO is full or timeout */ + ret = readl_poll_timeout_atomic(port->membase + SUP_UART_LSR, val, + (val & SUP_UART_LSR_TX), 1, 10000); + + if (ret == -ETIMEDOUT) { + dev_err(port->dev, "Timeout waiting while UART TX FULL\n"); + return; + } +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +static void sunplus_poll_put_char(struct uart_port *port, unsigned char data) +{ + wait_for_xmitr(port); + sp_uart_put_char(port, data); +} + +static int sunplus_poll_get_char(struct uart_port *port) +{ + unsigned int lsr = readl(port->membase + SUP_UART_LSR); + + if (!(lsr & SUP_UART_LSR_RX)) + return NO_POLL_CHAR; + + return readl(port->membase + SUP_UART_DATA); +} +#endif + +static const struct uart_ops sunplus_uart_ops = { + .tx_empty = sunplus_tx_empty, + .set_mctrl = sunplus_set_mctrl, + .get_mctrl = sunplus_get_mctrl, + .stop_tx = sunplus_stop_tx, + .start_tx = sunplus_start_tx, + .stop_rx = sunplus_stop_rx, + .break_ctl = sunplus_break_ctl, + .startup = sunplus_startup, + .shutdown = sunplus_shutdown, + .set_termios = sunplus_set_termios, + .set_ldisc = sunplus_set_ldisc, + .type = sunplus_type, + .config_port = sunplus_config_port, + .verify_port = sunplus_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = sunplus_poll_put_char, + .poll_get_char = sunplus_poll_get_char, +#endif +}; + +#ifdef CONFIG_SERIAL_SUNPLUS_CONSOLE +struct sunplus_uart_port *sunplus_console_ports[SUP_UART_NR]; + +static void sunplus_uart_console_putchar(struct uart_port *port, + unsigned char ch) +{ + wait_for_xmitr(port); + sp_uart_put_char(port, ch); +} + +static void sunplus_console_write(struct console *co, + const char *s, + unsigned int count) +{ + unsigned long flags; + int locked = 1; + + local_irq_save(flags); + + if (sunplus_console_ports[co->index]->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&sunplus_console_ports[co->index]->port.lock); + else + spin_lock(&sunplus_console_ports[co->index]->port.lock); + + uart_console_write(&sunplus_console_ports[co->index]->port, s, count, + sunplus_uart_console_putchar); + + if (locked) + spin_unlock(&sunplus_console_ports[co->index]->port.lock); + + local_irq_restore(flags); +} + +static int __init sunplus_console_setup(struct console *co, char *options) +{ + struct sunplus_uart_port *sup; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= SUP_UART_NR) + return -EINVAL; + + sup = sunplus_console_ports[co->index]; + if (!sup) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&sup->port, co, baud, parity, bits, flow); +} + +static struct uart_driver sunplus_uart_driver; +static struct console sunplus_uart_console = { + .name = "ttySUP", + .write = sunplus_console_write, + .device = uart_console_device, + .setup = sunplus_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunplus_uart_driver +}; + +#define SERIAL_SUNPLUS_CONSOLE (&sunplus_uart_console) +#else +#define SERIAL_SUNPLUS_CONSOLE NULL +#endif + +static struct uart_driver sunplus_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "sunplus_uart", + .dev_name = "ttySUP", + .major = TTY_MAJOR, + .minor = 64, + .nr = SUP_UART_NR, + .cons = SERIAL_SUNPLUS_CONSOLE, +}; + +static void sunplus_uart_disable_unprepare(void *data) +{ + clk_disable_unprepare(data); +} + +static void sunplus_uart_reset_control_assert(void *data) +{ + reset_control_assert(data); +} + +static int sunplus_uart_probe(struct platform_device *pdev) +{ + struct sunplus_uart_port *sup; + struct uart_port *port; + struct resource *res; + int ret, irq; + + pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + + if (pdev->id < 0 || pdev->id >= SUP_UART_NR) + return -EINVAL; + + sup = devm_kzalloc(&pdev->dev, sizeof(*sup), GFP_KERNEL); + if (!sup) + return -ENOMEM; + + sup->clk = devm_clk_get_optional(&pdev->dev, NULL); + if (IS_ERR(sup->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(sup->clk), "clk not found\n"); + + ret = clk_prepare_enable(sup->clk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&pdev->dev, sunplus_uart_disable_unprepare, sup->clk); + if (ret) + return ret; + + sup->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(sup->rstc)) + return dev_err_probe(&pdev->dev, PTR_ERR(sup->rstc), "rstc not found\n"); + + port = &sup->port; + + port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(port->membase)) + return dev_err_probe(&pdev->dev, PTR_ERR(port->membase), "membase not found\n"); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + port->mapbase = res->start; + port->uartclk = clk_get_rate(sup->clk); + port->line = pdev->id; + port->irq = irq; + port->dev = &pdev->dev; + port->iotype = UPIO_MEM; + port->ops = &sunplus_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->fifosize = 128; + + ret = reset_control_deassert(sup->rstc); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&pdev->dev, sunplus_uart_reset_control_assert, sup->rstc); + if (ret) + return ret; + +#ifdef CONFIG_SERIAL_SUNPLUS_CONSOLE + sunplus_console_ports[sup->port.line] = sup; +#endif + + platform_set_drvdata(pdev, &sup->port); + + ret = uart_add_one_port(&sunplus_uart_driver, &sup->port); +#ifdef CONFIG_SERIAL_SUNPLUS_CONSOLE + if (ret) + sunplus_console_ports[sup->port.line] = NULL; +#endif + + return ret; +} + +static int sunplus_uart_remove(struct platform_device *pdev) +{ + struct sunplus_uart_port *sup = platform_get_drvdata(pdev); + + uart_remove_one_port(&sunplus_uart_driver, &sup->port); + + return 0; +} + +static int __maybe_unused sunplus_uart_suspend(struct device *dev) +{ + struct sunplus_uart_port *sup = dev_get_drvdata(dev); + + if (!uart_console(&sup->port)) + uart_suspend_port(&sunplus_uart_driver, &sup->port); + + return 0; +} + +static int __maybe_unused sunplus_uart_resume(struct device *dev) +{ + struct sunplus_uart_port *sup = dev_get_drvdata(dev); + + if (!uart_console(&sup->port)) + uart_resume_port(&sunplus_uart_driver, &sup->port); + + return 0; +} + +static const struct dev_pm_ops sunplus_uart_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sunplus_uart_suspend, sunplus_uart_resume) +}; + +static const struct of_device_id sp_uart_of_match[] = { + { .compatible = "sunplus,sp7021-uart" }, + {} +}; +MODULE_DEVICE_TABLE(of, sp_uart_of_match); + +static struct platform_driver sunplus_uart_platform_driver = { + .probe = sunplus_uart_probe, + .remove = sunplus_uart_remove, + .driver = { + .name = "sunplus_uart", + .of_match_table = sp_uart_of_match, + .pm = &sunplus_uart_pm_ops, + } +}; + +static int __init sunplus_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&sunplus_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&sunplus_uart_platform_driver); + if (ret) + uart_unregister_driver(&sunplus_uart_driver); + + return ret; +} +module_init(sunplus_uart_init); + +static void __exit sunplus_uart_exit(void) +{ + platform_driver_unregister(&sunplus_uart_platform_driver); + uart_unregister_driver(&sunplus_uart_driver); +} +module_exit(sunplus_uart_exit); + +#ifdef CONFIG_SERIAL_EARLYCON +static void sunplus_uart_putc(struct uart_port *port, unsigned char c) +{ + unsigned int val; + int ret; + + ret = readl_poll_timeout_atomic(port->membase + SUP_UART_LSR, val, + (val & UART_LSR_TEMT), 1, 10000); + if (ret) + return; + + writel(c, port->membase + SUP_UART_DATA); +} + +static void sunplus_uart_early_write(struct console *con, const char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, sunplus_uart_putc); +} + +static int __init +sunplus_uart_early_setup(struct earlycon_device *dev, const char *opt) +{ + if (!(dev->port.membase || dev->port.iobase)) + return -ENODEV; + + dev->con->write = sunplus_uart_early_write; + + return 0; +} +OF_EARLYCON_DECLARE(sunplus_uart, "sunplus,sp7021-uart", sunplus_uart_early_setup); +#endif + +MODULE_DESCRIPTION("Sunplus UART driver"); +MODULE_AUTHOR("Hammer Hsieh <hammerh0314@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index 92e572634009..6ea52293d9f3 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -846,7 +846,7 @@ static struct uart_sunsab_port *sunsab_ports; #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE -static void sunsab_console_putchar(struct uart_port *port, int c) +static void sunsab_console_putchar(struct uart_port *port, unsigned char c) { struct uart_sunsab_port *up = container_of(port, struct uart_sunsab_port, port); diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 98b2f4fb9a99..c31389114b86 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -1281,7 +1281,7 @@ static void wait_for_xmitr(struct uart_sunsu_port *up) } } -static void sunsu_console_putchar(struct uart_port *port, int ch) +static void sunsu_console_putchar(struct uart_port *port, unsigned char ch) { struct uart_sunsu_port *up = container_of(port, struct uart_sunsu_port, port); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index b714b00d2dad..c14275d83b0b 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -100,7 +100,7 @@ struct uart_sunzilog_port { #endif }; -static void sunzilog_putchar(struct uart_port *port, int ch); +static void sunzilog_putchar(struct uart_port *port, unsigned char ch); #define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) #define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) @@ -1125,7 +1125,7 @@ static void sunzilog_free_tables(void) #define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ -static void __maybe_unused sunzilog_putchar(struct uart_port *port, int ch) +static void __maybe_unused sunzilog_putchar(struct uart_port *port, unsigned char ch) { struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); int loops = ZS_PUT_CHAR_MAX_DELAY; diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index e1fa52d31474..007db67292a2 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -482,7 +482,7 @@ static void ulite_console_wait_tx(struct uart_port *port) "timeout waiting for TX buffer empty\n"); } -static void ulite_console_putchar(struct uart_port *port, int ch) +static void ulite_console_putchar(struct uart_port *port, unsigned char ch) { ulite_console_wait_tx(port); uart_out32(ch, ULITE_TX, port); @@ -558,7 +558,7 @@ static struct console ulite_console = { .data = &ulite_uart_driver, }; -static void early_uartlite_putc(struct uart_port *port, int c) +static void early_uartlite_putc(struct uart_port *port, unsigned char c) { /* * Limit how many times we'll spin waiting for TX FIFO status. diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c index 647198b1e2b9..e0bf003ca3a1 100644 --- a/drivers/tty/serial/vr41xx_siu.c +++ b/drivers/tty/serial/vr41xx_siu.c @@ -504,20 +504,7 @@ static void siu_set_termios(struct uart_port *port, struct ktermios *new, unsigned long flags; c_cflag = new->c_cflag; - switch (c_cflag & CSIZE) { - case CS5: - lcr = UART_LCR_WLEN5; - break; - case CS6: - lcr = UART_LCR_WLEN6; - break; - case CS7: - lcr = UART_LCR_WLEN7; - break; - default: - lcr = UART_LCR_WLEN8; - break; - } + lcr = UART_LCR_WLEN(tty_get_char_size(c_cflag)); if (c_cflag & CSTOPB) lcr |= UART_LCR_STOP; @@ -743,7 +730,7 @@ static void wait_for_xmitr(struct uart_port *port) } } -static void siu_console_putchar(struct uart_port *port, int ch) +static void siu_console_putchar(struct uart_port *port, unsigned char ch) { wait_for_xmitr(port); siu_write(port, UART_TX, ch); diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 9adfe3dc970f..6f08136ce78a 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -484,7 +484,7 @@ static void wait_for_xmitr(struct uart_port *port) } while (status & 0x10); } -static void vt8500_console_putchar(struct uart_port *port, int c) +static void vt8500_console_putchar(struct uart_port *port, unsigned char c) { wait_for_xmitr(port); writeb(c, port->membase + VT8500_TXFIFO); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index d5e243908d9f..250a1d888eeb 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1142,7 +1142,7 @@ static struct uart_driver cdns_uart_uart_driver; * @port: Handle to the uart port structure * @ch: Character to be written */ -static void cdns_uart_console_putchar(struct uart_port *port, int ch) +static void cdns_uart_console_putchar(struct uart_port *port, unsigned char ch) { while (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL) cpu_relax(); diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index 4b4f604646a7..70969bf9d82c 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -1124,7 +1124,7 @@ static int __init zs_probe_sccs(void) #ifdef CONFIG_SERIAL_ZS_CONSOLE -static void zs_console_putchar(struct uart_port *uport, int ch) +static void zs_console_putchar(struct uart_port *uport, unsigned char ch) { struct zs_port *zport = to_zport(uport); struct zs_scc *scc = zport->scc; diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 7709ce655f44..880608a65773 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -225,8 +225,11 @@ int tty_port_alloc_xmit_buf(struct tty_port *port) { /* We may sleep in get_zeroed_page() */ mutex_lock(&port->buf_mutex); - if (port->xmit_buf == NULL) + if (port->xmit_buf == NULL) { port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); + if (port->xmit_buf) + kfifo_init(&port->xmit_fifo, port->xmit_buf, PAGE_SIZE); + } mutex_unlock(&port->buf_mutex); if (port->xmit_buf == NULL) return -ENOMEM; @@ -237,10 +240,9 @@ EXPORT_SYMBOL(tty_port_alloc_xmit_buf); void tty_port_free_xmit_buf(struct tty_port *port) { mutex_lock(&port->buf_mutex); - if (port->xmit_buf != NULL) { - free_page((unsigned long)port->xmit_buf); - port->xmit_buf = NULL; - } + free_page((unsigned long)port->xmit_buf); + port->xmit_buf = NULL; + INIT_KFIFO(port->xmit_fifo); mutex_unlock(&port->buf_mutex); } EXPORT_SYMBOL(tty_port_free_xmit_buf); @@ -267,8 +269,7 @@ static void tty_port_destructor(struct kref *kref) /* check if last port ref was dropped before tty release */ if (WARN_ON(port->itty)) return; - if (port->xmit_buf) - free_page((unsigned long)port->xmit_buf); + free_page((unsigned long)port->xmit_buf); tty_port_destroy(port); if (port->ops && port->ops->destruct) port->ops->destruct(port); @@ -732,6 +733,9 @@ EXPORT_SYMBOL_GPL(tty_port_install); * the device to be ready using tty_port_block_til_ready() (e.g. raises * DTR/CTS and waits for carrier). * + * Note that @port->ops->shutdown is not called when @port->ops->activate + * returns an error (on the contrary, @tty->ops->close is). + * * Locking: Caller holds tty lock. * * Note: may drop and reacquire tty lock (in tty_port_block_til_ready()) so diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 58013698635f..8c685b501404 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -898,11 +898,13 @@ int vt_ioctl(struct tty_struct *tty, if (arg > MAX_NR_CONSOLES) return -ENXIO; - if (arg == 0) + if (arg == 0) { vt_disallocate_all(); - else - return vt_disallocate(--arg); - break; + break; + } + + arg = array_index_nospec(arg - 1, MAX_NR_CONSOLES); + return vt_disallocate(arg); case VT_RESIZE: { diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 5dd710e9fe7d..c0e4df87ff22 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -200,21 +200,8 @@ static void ark3116_set_termios(struct tty_struct *tty, __u8 lcr, hcr, eval; /* set data bit count */ - switch (cflag & CSIZE) { - case CS5: - lcr = UART_LCR_WLEN5; - break; - case CS6: - lcr = UART_LCR_WLEN6; - break; - case CS7: - lcr = UART_LCR_WLEN7; - break; - default: - case CS8: - lcr = UART_LCR_WLEN8; - break; - } + lcr = UART_LCR_WLEN(tty_get_char_size(cflag)); + if (cflag & CSTOPB) lcr |= UART_LCR_STOP; if (cflag & PARENB) diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 3ad1f515fb68..d9f20256a6a8 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -643,21 +643,7 @@ static void f81232_set_termios(struct tty_struct *tty, if (C_CSTOPB(tty)) new_lcr |= UART_LCR_STOP; - switch (C_CSIZE(tty)) { - case CS5: - new_lcr |= UART_LCR_WLEN5; - break; - case CS6: - new_lcr |= UART_LCR_WLEN6; - break; - case CS7: - new_lcr |= UART_LCR_WLEN7; - break; - default: - case CS8: - new_lcr |= UART_LCR_WLEN8; - break; - } + new_lcr |= UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag)); mutex_lock(&priv->lock); diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index c0bca52ef92a..d789c1ec87b3 100644 --- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -970,21 +970,7 @@ static void f81534_set_termios(struct tty_struct *tty, if (C_CSTOPB(tty)) new_lcr |= UART_LCR_STOP; - switch (C_CSIZE(tty)) { - case CS5: - new_lcr |= UART_LCR_WLEN5; - break; - case CS6: - new_lcr |= UART_LCR_WLEN6; - break; - case CS7: - new_lcr |= UART_LCR_WLEN7; - break; - default: - case CS8: - new_lcr |= UART_LCR_WLEN8; - break; - } + new_lcr |= UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag)); baud = tty_get_baud_rate(tty); if (!baud) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 227f43d2bd56..1e12b5f30dcc 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1380,30 +1380,12 @@ static void change_port_settings(struct tty_struct *tty, return; } - lData = UART_LCR_WLEN8; lStop = 0x00; /* 1 stop bit */ lParity = 0x00; /* No parity */ cflag = tty->termios.c_cflag; - /* Change the number of bits */ - switch (cflag & CSIZE) { - case CS5: - lData = UART_LCR_WLEN5; - break; - - case CS6: - lData = UART_LCR_WLEN6; - break; - - case CS7: - lData = UART_LCR_WLEN7; - break; - default: - case CS8: - lData = UART_LCR_WLEN8; - break; - } + lData = UART_LCR_WLEN(tty_get_char_size(cflag)); /* Change the Parity bit */ if (cflag & PARENB) { diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 971907f083a3..36b1e064e51f 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -281,21 +281,7 @@ static void qt2_set_termios(struct tty_struct *tty, new_lcr |= SERIAL_EVEN_PARITY; } - switch (cflag & CSIZE) { - case CS5: - new_lcr |= UART_LCR_WLEN5; - break; - case CS6: - new_lcr |= UART_LCR_WLEN6; - break; - case CS7: - new_lcr |= UART_LCR_WLEN7; - break; - default: - case CS8: - new_lcr |= UART_LCR_WLEN8; - break; - } + new_lcr |= UART_LCR_WLEN(tty_get_char_size(cflag)); baud = tty_get_baud_rate(tty); if (!baud) diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 3baf7c0f5a98..181e302136a5 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -231,21 +231,7 @@ static void ssu100_set_termios(struct tty_struct *tty, urb_value |= SERIAL_EVEN_PARITY; } - switch (cflag & CSIZE) { - case CS5: - urb_value |= UART_LCR_WLEN5; - break; - case CS6: - urb_value |= UART_LCR_WLEN6; - break; - case CS7: - urb_value |= UART_LCR_WLEN7; - break; - default: - case CS8: - urb_value |= UART_LCR_WLEN8; - break; - } + urb_value |= UART_LCR_WLEN(tty_get_char_size(cflag)); baud = tty_get_baud_rate(tty); if (!baud) diff --git a/include/linux/math64.h b/include/linux/math64.h index 2928f03d6d46..a14f40de1dca 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -301,6 +301,19 @@ u64 mul_u64_u64_div_u64(u64 a, u64 mul, u64 div); ({ u64 _tmp = (divisor); div64_u64((dividend) + _tmp / 2, _tmp); }) /* + * DIV_U64_ROUND_CLOSEST - unsigned 64bit divide with 32bit divisor rounded to nearest integer + * @dividend: unsigned 64bit dividend + * @divisor: unsigned 32bit divisor + * + * Divide unsigned 64bit dividend by unsigned 32bit divisor + * and round to closest integer. + * + * Return: dividend / divisor rounded to nearest integer + */ +#define DIV_U64_ROUND_CLOSEST(dividend, divisor) \ + ({ u32 _tmp = (divisor); div_u64((u64)(dividend) + _tmp / 2, _tmp); }) + +/* * DIV_S64_ROUND_CLOSEST - signed 64bit divide with 32bit divisor rounded to nearest integer * @dividend: signed 64bit dividend * @divisor: signed 32bit divisor diff --git a/include/linux/serial.h b/include/linux/serial.h index 0916107c77f9..0b8b7d7c8f33 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -12,6 +12,8 @@ #include <asm/page.h> #include <uapi/linux/serial.h> +/* Helper for dealing with UART_LCR_WLEN* defines */ +#define UART_LCR_WLEN(x) ((x) - 5) /* * Counters of the input lines (CTS, DSR, RI, CD) interrupts diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index c58cc142d23f..d4828e69087a 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -171,7 +171,7 @@ struct uart_port { * assigned from the serial_struct flags in uart_set_info() * [for bit definitions in the UPF_CHANGE_MASK] * - * Bits [0..UPF_LAST_USER] are userspace defined/visible/changeable + * Bits [0..ASYNCB_LAST_USER] are userspace defined/visible/changeable * The remaining bits are serial-core specific and not modifiable by * userspace. */ @@ -399,7 +399,7 @@ int uart_set_options(struct uart_port *port, struct console *co, int baud, struct tty_driver *uart_console_device(struct console *co, int *index); void uart_console_write(struct uart_port *port, const char *s, unsigned int count, - void (*putchar)(struct uart_port *, int)); + void (*putchar)(struct uart_port *, unsigned char)); /* * Port/driver registration/removal @@ -458,6 +458,8 @@ extern void uart_handle_cts_change(struct uart_port *uport, extern void uart_insert_char(struct uart_port *port, unsigned int status, unsigned int overrun, unsigned int ch, unsigned int flag); +void uart_xchar_out(struct uart_port *uport, int offset); + #ifdef CONFIG_MAGIC_SYSRQ_SERIAL #define SYSRQ_TIMEOUT (HZ * 5) diff --git a/include/linux/tty_port.h b/include/linux/tty_port.h index d3ea9ed0b98e..58e9619116b7 100644 --- a/include/linux/tty_port.h +++ b/include/linux/tty_port.h @@ -2,6 +2,7 @@ #ifndef _LINUX_TTY_PORT_H #define _LINUX_TTY_PORT_H +#include <linux/kfifo.h> #include <linux/kref.h> #include <linux/mutex.h> #include <linux/tty_buffer.h> @@ -67,6 +68,7 @@ extern const struct tty_port_client_operations tty_port_default_client_ops; * @mutex: locking, for open, shutdown and other port operations * @buf_mutex: @xmit_buf alloc lock * @xmit_buf: optional xmit buffer used by some drivers + * @xmit_fifo: optional xmit buffer used by some drivers * @close_delay: delay in jiffies to wait when closing the port * @closing_wait: delay in jiffies for output to be sent before closing * @drain_delay: set to zero if no pure time based drain is needed else set to @@ -110,6 +112,7 @@ struct tty_port { struct mutex mutex; struct mutex buf_mutex; unsigned char *xmit_buf; + DECLARE_KFIFO_PTR(xmit_fifo, unsigned char); unsigned int close_delay; unsigned int closing_wait; int drain_delay; diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index c4042dcfdc0c..6faf502b7860 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -68,6 +68,9 @@ /* NVIDIA Tegra Combined UART */ #define PORT_TEGRA_TCU 41 +/* ASPEED AST2x00 virtual UART */ +#define PORT_ASPEED_VUART 42 + /* Intel EG20 */ #define PORT_PCH_8LINE 44 #define PORT_PCH_2LINE 45 @@ -274,4 +277,7 @@ /* Freescale LINFlexD UART */ #define PORT_LINFLEXUART 122 +/* Sunplus UART */ +#define PORT_SUNPLUS 123 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h index a58deb3061eb..9d0f06bfbac3 100644 --- a/include/uapi/linux/tty.h +++ b/include/uapi/linux/tty.h @@ -6,8 +6,6 @@ * 'tty.h' defines some structures used by tty_io.c and some defines. */ -#define NR_LDISCS 30 - /* line disciplines */ #define N_TTY 0 #define N_SLIP 1 @@ -39,5 +37,9 @@ #define N_SPEAKUP 26 /* Speakup communication with synths */ #define N_NULL 27 /* Null ldisc used for error handling */ #define N_MCTP 28 /* MCTP-over-serial */ +#define N_DEVELOPMENT 29 /* Manual out-of-tree testing */ + +/* Always the newest line discipline + 1 */ +#define NR_LDISCS 30 #endif /* _UAPI_LINUX_TTY_H */ |