summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/m68k/README.buddha2
-rw-r--r--Documentation/networking/ifenslave.c2
-rw-r--r--arch/arm/lib/copy_template.S2
-rw-r--r--drivers/char/mxser.h2
-rw-r--r--drivers/char/synclink.c2
-rw-r--r--drivers/edac/edac_mc.c2
-rw-r--r--drivers/net/irda/nsc-ircc.c2
-rw-r--r--drivers/net/sis900.c2
-rw-r--r--drivers/net/tulip/de4x5.c2
-rw-r--r--drivers/net/tulip/pnic2.c2
-rw-r--r--drivers/net/typhoon.c4
-rw-r--r--drivers/net/wireless/orinoco.c2
-rw-r--r--drivers/net/wireless/prism54/isl_ioctl.c2
-rw-r--r--drivers/scsi/3w-9xxx.c2
-rw-r--r--drivers/serial/8250.c2
-rw-r--r--drivers/serial/serial_txx9.c2
-rw-r--r--drivers/serial/sunsu.c2
-rw-r--r--drivers/usb/host/ohci-s3c2410.c2
-rw-r--r--drivers/usb/net/zaurus.c2
-rw-r--r--fs/mbcache.c2
-rw-r--r--include/asm-parisc/pdc.h2
-rw-r--r--include/asm-sh/addrspace.h2
-rw-r--r--include/asm-sparc64/floppy.h2
-rw-r--r--include/linux/fb.h2
-rw-r--r--mm/mempolicy.c2
-rw-r--r--net/irda/af_irda.c6
-rw-r--r--sound/pci/rme32.c8
-rw-r--r--sound/pci/rme96.c8
-rw-r--r--sound/pci/rme9652/hdspm.c2
-rw-r--r--sound/usb/usx2y/usx2yhwdeppcm.c2
30 files changed, 39 insertions, 39 deletions
diff --git a/Documentation/m68k/README.buddha b/Documentation/m68k/README.buddha
index bf802ffc98ad..ef484a719bb9 100644
--- a/Documentation/m68k/README.buddha
+++ b/Documentation/m68k/README.buddha
@@ -29,7 +29,7 @@ address is written to $4a, then the whole Byte is written to
$48, while it doesn't matter how often you're writing to $4a
as long as $48 is not touched. After $48 has been written,
the whole card disappears from $e8 and is mapped to the new
-address just written. Make shure $4a is written before $48,
+address just written. Make sure $4a is written before $48,
otherwise your chance is only 1:16 to find the board :-).
The local memory-map is even active when mapped to $e8:
diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c
index 545447ac503a..a12059886755 100644
--- a/Documentation/networking/ifenslave.c
+++ b/Documentation/networking/ifenslave.c
@@ -87,7 +87,7 @@
* would fail and generate an error message in the system log.
* - For opt_c: slave should not be set to the master's setting
* while it is running. It was already set during enslave. To
- * simplify things, it is now handeled separately.
+ * simplify things, it is now handled separately.
*
* - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
* - Code cleanup and style changes
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 838e435e4922..cab355c0c1f7 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -236,7 +236,7 @@
/*
- * Abort preanble and completion macros.
+ * Abort preamble and completion macros.
* If a fixup handler is required then those macros must surround it.
* It is assumed that the fixup code will handle the private part of
* the exit macro.
diff --git a/drivers/char/mxser.h b/drivers/char/mxser.h
index e7fd0b08e0b7..7e188a4d602a 100644
--- a/drivers/char/mxser.h
+++ b/drivers/char/mxser.h
@@ -118,7 +118,7 @@
// enable CTS interrupt
#define MOXA_MUST_IER_ECTSI 0x80
-// eanble RTS interrupt
+// enable RTS interrupt
#define MOXA_MUST_IER_ERTSI 0x40
// enable Xon/Xoff interrupt
#define MOXA_MUST_IER_XINT 0x20
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index abb03e52fe12..fee2aca3f6a5 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -5996,7 +5996,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
* <15..8> ? RxFIFO IRQ Request Level
*
* Note: For async mode the receive FIFO level must be set
- * to 0 to aviod the situation where the FIFO contains fewer bytes
+ * to 0 to avoid the situation where the FIFO contains fewer bytes
* than the trigger level and no more data is expected.
*
* <7> 0 Exited Hunt IA (Interrupt Arm)
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 905f58ba8e16..ea06e3a4dc35 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -2044,7 +2044,7 @@ static int __init edac_mc_init(void)
*/
clear_pci_parity_errors();
- /* Create the MC sysfs entires */
+ /* Create the MC sysfs entries */
if (edac_sysfs_memctrl_setup()) {
edac_printk(KERN_ERR, EDAC_MC,
"Error initializing sysfs code\n");
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 9aa074b44dd3..cc7ff8f00e42 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -812,7 +812,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
int cfg_base = info->cfg_base;
int enabled;
- /* User is shure about his config... accept it. */
+ /* User is sure about his config... accept it. */
IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
"io=0x%04x, irq=%d, dma=%d\n",
__FUNCTION__, info->fir_base, info->irq, info->dma);
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 8429ceb01389..b82191d2bee1 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -2283,7 +2283,7 @@ static void set_rx_mode(struct net_device *net_dev)
int i, table_entries;
u32 rx_mode;
- /* 635 Hash Table entires = 256(2^16) */
+ /* 635 Hash Table entries = 256(2^16) */
if((sis_priv->chipset_rev >= SIS635A_900_REV) ||
(sis_priv->chipset_rev == SIS900B_900_REV))
table_entries = 16;
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index ee48bfd67349..d1a86a080a65 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -513,7 +513,7 @@ struct mii_phy {
u_char *rst; /* Start of reset sequence in SROM */
u_int mc; /* Media Capabilities */
u_int ana; /* NWay Advertisement */
- u_int fdx; /* Full DupleX capabilites for each media */
+ u_int fdx; /* Full DupleX capabilities for each media */
u_int ttm; /* Transmit Threshold Mode for each media */
u_int mci; /* 21142 MII Connector Interrupt info */
};
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index 55f4a9a631bc..ab985023fcca 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -199,7 +199,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
/* negotiation ended successfully */
/* get the link partners reply and mask out all but
- * bits 24-21 which show the partners capabilites
+ * bits 24-21 which show the partners capabilities
* and match those to what we advertised
*
* then begin to interpret the results of the negotiation.
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index cde35dd87906..c1ce87a5f8d3 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -208,7 +208,7 @@ static const struct typhoon_card_info typhoon_card_info[] __devinitdata = {
};
/* Notes on the new subsystem numbering scheme:
- * bits 0-1 indicate crypto capabilites: (0) variable, (1) DES, or (2) 3DES
+ * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES
* bit 4 indicates if this card has secured firmware (we don't support it)
* bit 8 indicates if this is a (0) copper or (1) fiber card
* bits 12-16 indicate card type: (0) client and (1) server
@@ -788,7 +788,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
/* we have two rings to choose from, but we only use txLo for now
* If we start using the Hi ring as well, we'll need to update
* typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(),
- * and TXHI_ENTIRES to match, as well as update the TSO code below
+ * and TXHI_ENTRIES to match, as well as update the TSO code below
* to get the right DMA address
*/
txRing = &tp->txLoRing;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 6fd0bf736830..8dfdfbd5966c 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -3858,7 +3858,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev,
unsigned long flags;
/* Note : you may have realised that, as this is a SET operation,
- * this is priviledged and therefore a normal user can't
+ * this is privileged and therefore a normal user can't
* perform scanning.
* This is not an error, while the device perform scanning,
* traffic doesn't flow, so it's a perfect DoS...
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index e5bb9f5ae429..989599ad33ef 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -747,7 +747,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info,
if (essid->length) {
dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */
- /* if it is to big, trunk it */
+ /* if it is too big, trunk it */
dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length);
} else {
dwrq->flags = 0;
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 0ab26d01877b..0d2b447c50ed 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1026,7 +1026,7 @@ static void twa_free_request_id(TW_Device_Extension *tw_dev, int request_id)
tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
} /* End twa_free_request_id() */
-/* This function will get parameter table entires from the firmware */
+/* This function will get parameter table entries from the firmware */
static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes)
{
TW_Command_Full *full_command_packet;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 5996d3cd0ed8..674b15c78f68 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1528,7 +1528,7 @@ static int serial8250_startup(struct uart_port *port)
/*
* Clear the FIFO buffers and disable them.
- * (they will be reeanbled in set_termios())
+ * (they will be reenabled in set_termios())
*/
serial8250_clear_fifos(up);
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index b848b7d94412..3bdee64d1a99 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -483,7 +483,7 @@ static int serial_txx9_startup(struct uart_port *port)
/*
* Clear the FIFO buffers and disable them.
- * (they will be reeanbled in set_termios())
+ * (they will be reenabled in set_termios())
*/
sio_set(up, TXX9_SIFCR,
TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 9fe2283d91e5..1c4396c2962d 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -641,7 +641,7 @@ static int sunsu_startup(struct uart_port *port)
/*
* Clear the FIFO buffers and disable them.
- * (they will be reeanbled in set_termios())
+ * (they will be reenabled in set_termios())
*/
if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 372527a83593..682bf2215660 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -158,7 +158,7 @@ static int ohci_s3c2410_hub_control (
"s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
hcd, typeReq, wValue, wIndex, buf, wLength);
- /* if we are only an humble host without any special capabilites
+ /* if we are only an humble host without any special capabilities
* process the request straight away and exit */
if (info == NULL) {
diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c
index 9c5ab251370c..f7ac9d6b9856 100644
--- a/drivers/usb/net/zaurus.c
+++ b/drivers/usb/net/zaurus.c
@@ -217,7 +217,7 @@ static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
* with devices that use it and those that don't.
*/
if ((detail->bDetailData[1] & ~0x02) != 0x01) {
- /* bmDataCapabilites == 0 would be fine too,
+ /* bmDataCapabilities == 0 would be fine too,
* but framing is minidriver-coupled for now.
*/
bad_detail:
diff --git a/fs/mbcache.c b/fs/mbcache.c
index 73e754fea2d8..e4fde1ab22cd 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -311,7 +311,7 @@ fail:
/*
* mb_cache_shrink()
*
- * Removes all cache entires of a device from the cache. All cache entries
+ * Removes all cache entries of a device from the cache. All cache entries
* currently in use cannot be freed, and thus remain in the cache. All others
* are freed.
*
diff --git a/include/asm-parisc/pdc.h b/include/asm-parisc/pdc.h
index 8e23e4c674f6..0a3face6c480 100644
--- a/include/asm-parisc/pdc.h
+++ b/include/asm-parisc/pdc.h
@@ -333,7 +333,7 @@ struct pdc_model { /* for PDC_MODEL */
unsigned long curr_key;
};
-/* Values for PDC_MODEL_CAPABILITES non-equivalent virtual aliasing support */
+/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
#define PDC_MODEL_IOPDIR_FDC (1 << 2) /* see sba_iommu.c */
#define PDC_MODEL_NVA_MASK (3 << 4)
diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h
index dbb05d1a26d1..720afc11c2ca 100644
--- a/include/asm-sh/addrspace.h
+++ b/include/asm-sh/addrspace.h
@@ -13,7 +13,7 @@
#include <asm/cpu/addrspace.h>
-/* Memory segments (32bit Priviledged mode addresses) */
+/* Memory segments (32bit Privileged mode addresses) */
#define P0SEG 0x00000000
#define P1SEG 0x80000000
#define P2SEG 0xa0000000
diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h
index 49d49a285943..6a95d5d0c576 100644
--- a/include/asm-sparc64/floppy.h
+++ b/include/asm-sparc64/floppy.h
@@ -738,7 +738,7 @@ static unsigned long __init sun_floppy_init(void)
if (!sun_floppy_types[0] && sun_floppy_types[1]) {
/*
* Set the drive exchange bit in FCR on NS87303,
- * make shure other bits are sane before doing so.
+ * make sure other bits are sane before doing so.
*/
ns87303_modify(config, FER, FER_EDM, 0);
ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 2cb19e6503aa..d03fadfcafe3 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -734,7 +734,7 @@ struct fb_tile_ops {
/* A driver may set this flag to indicate that it does want a set_par to be
* called every time when fbcon_switch is executed. The advantage is that with
- * this flag set you can really be shure that set_par is always called before
+ * this flag set you can really be sure that set_par is always called before
* any of the functions dependant on the correct hardware state or altering
* that state, even if you are using some broken X releases. The disadvantage
* is that it introduces unwanted delays to every console switch if set_par
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 4f71cfd29c6f..dec8249e972d 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -912,7 +912,7 @@ asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode,
/*
* Check if this process has the right to modify the specified
* process. The right exists if the process has administrative
- * capabilities, superuser priviledges or the same
+ * capabilities, superuser privileges or the same
* userid as the target process.
*/
if ((current->euid != task->suid) && (current->euid != task->uid) &&
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 759445648667..627b11342233 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1302,7 +1302,7 @@ static int irda_sendmsg(struct kiocb *iocb, struct socket *sock,
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
- /* Check that we don't send out to big frames */
+ /* Check that we don't send out too big frames */
if (len > self->max_data_size) {
IRDA_DEBUG(2, "%s(), Chopping frame from %zd to %d bytes!\n",
__FUNCTION__, len, self->max_data_size);
@@ -1546,7 +1546,7 @@ static int irda_sendmsg_dgram(struct kiocb *iocb, struct socket *sock,
IRDA_ASSERT(self != NULL, return -1;);
/*
- * Check that we don't send out to big frames. This is an unreliable
+ * Check that we don't send out too big frames. This is an unreliable
* service, so we have no fragmentation and no coalescence
*/
if (len > self->max_data_size) {
@@ -1642,7 +1642,7 @@ static int irda_sendmsg_ultra(struct kiocb *iocb, struct socket *sock,
}
/*
- * Check that we don't send out to big frames. This is an unreliable
+ * Check that we don't send out too big frames. This is an unreliable
* service, so we have no fragmentation and no coalescence
*/
if (len > self->max_data_size) {
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index 0cbef5fe6c63..ab78544bf042 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -313,7 +313,7 @@ static int snd_rme32_capture_copy(struct snd_pcm_substream *substream, int chann
}
/*
- * SPDIF I/O capabilites (half-duplex mode)
+ * SPDIF I/O capabilities (half-duplex mode)
*/
static struct snd_pcm_hardware snd_rme32_spdif_info = {
.info = (SNDRV_PCM_INFO_MMAP_IOMEM |
@@ -339,7 +339,7 @@ static struct snd_pcm_hardware snd_rme32_spdif_info = {
};
/*
- * ADAT I/O capabilites (half-duplex mode)
+ * ADAT I/O capabilities (half-duplex mode)
*/
static struct snd_pcm_hardware snd_rme32_adat_info =
{
@@ -364,7 +364,7 @@ static struct snd_pcm_hardware snd_rme32_adat_info =
};
/*
- * SPDIF I/O capabilites (full-duplex mode)
+ * SPDIF I/O capabilities (full-duplex mode)
*/
static struct snd_pcm_hardware snd_rme32_spdif_fd_info = {
.info = (SNDRV_PCM_INFO_MMAP |
@@ -390,7 +390,7 @@ static struct snd_pcm_hardware snd_rme32_spdif_fd_info = {
};
/*
- * ADAT I/O capabilites (full-duplex mode)
+ * ADAT I/O capabilities (full-duplex mode)
*/
static struct snd_pcm_hardware snd_rme32_adat_fd_info =
{
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 0e694b011dcc..6c2a9f4a7659 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -359,7 +359,7 @@ snd_rme96_capture_copy(struct snd_pcm_substream *substream,
}
/*
- * Digital output capabilites (S/PDIF)
+ * Digital output capabilities (S/PDIF)
*/
static struct snd_pcm_hardware snd_rme96_playback_spdif_info =
{
@@ -388,7 +388,7 @@ static struct snd_pcm_hardware snd_rme96_playback_spdif_info =
};
/*
- * Digital input capabilites (S/PDIF)
+ * Digital input capabilities (S/PDIF)
*/
static struct snd_pcm_hardware snd_rme96_capture_spdif_info =
{
@@ -417,7 +417,7 @@ static struct snd_pcm_hardware snd_rme96_capture_spdif_info =
};
/*
- * Digital output capabilites (ADAT)
+ * Digital output capabilities (ADAT)
*/
static struct snd_pcm_hardware snd_rme96_playback_adat_info =
{
@@ -442,7 +442,7 @@ static struct snd_pcm_hardware snd_rme96_playback_adat_info =
};
/*
- * Digital input capabilites (ADAT)
+ * Digital input capabilities (ADAT)
*/
static struct snd_pcm_hardware snd_rme96_capture_adat_info =
{
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 980b9cd689dd..b5538efd146b 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -2256,7 +2256,7 @@ static int snd_hdspm_create_controls(struct snd_card *card, struct hdspm * hdspm
}
/* Channel playback mixer as default control
- Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats to big for any alsamixer
+ Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats too big for any alsamixer
they are accesible via special IOCTL on hwdep
and the mixer 2dimensional mixer control */
diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c
index 315855082fe1..fe67a92e2a1a 100644
--- a/sound/usb/usx2y/usx2yhwdeppcm.c
+++ b/sound/usb/usx2y/usx2yhwdeppcm.c
@@ -404,7 +404,7 @@ static void usX2Y_usbpcm_subs_startup(struct snd_usX2Y_substream *subs)
struct usX2Ydev * usX2Y = subs->usX2Y;
usX2Y->prepare_subs = subs;
subs->urb[0]->start_frame = -1;
- smp_wmb(); // Make shure above modifications are seen by i_usX2Y_subs_startup()
+ smp_wmb(); // Make sure above modifications are seen by i_usX2Y_subs_startup()
usX2Y_urbs_set_complete(usX2Y, i_usX2Y_usbpcm_subs_startup);
}