summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/phy/Kconfig60
-rw-r--r--drivers/net/phy/Makefile13
-rw-r--r--drivers/net/phy/mdio-boardinfo.c1
-rw-r--r--drivers/net/phy/mdio_bus.c9
-rw-r--r--include/linux/phy.h21
6 files changed, 76 insertions, 30 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 98ed4d96987c..55f75aea283c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
-obj-$(CONFIG_PHYLIB) += phy/
+obj-$(CONFIG_MDIO_DEVICE) += phy/
obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_NET_TEAM) += team/
obj-$(CONFIG_TUN) += tun.o
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 7ab4b14a43b7..60ffc9da6a28 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -2,33 +2,12 @@
# PHY Layer Configuration
#
-menuconfig PHYLIB
- tristate "PHY Device support and infrastructure"
- depends on NETDEVICES
+menuconfig MDIO_DEVICE
+ tristate "MDIO bus device drivers"
help
- Ethernet controllers are usually attached to PHY
- devices. This option provides infrastructure for
- managing PHY devices.
-
-if PHYLIB
-
-config SWPHY
- bool
-
-config LED_TRIGGER_PHY
- bool "Support LED triggers for tracking link state"
- depends on LEDS_TRIGGERS
- ---help---
- Adds support for a set of LED trigger events per-PHY. Link
- state change will trigger the events, for consumption by an
- LED class driver. There are triggers for each link speed currently
- supported by the phy, and are of the form:
- <mii bus id>:<phy>:<speed>
-
- Where speed is in the form:
- <Speed in megabits>Mbps or <Speed in gigabits>Gbps
+ MDIO devices and driver infrastructure code.
-comment "MDIO bus device drivers"
+if MDIO_DEVICE
config MDIO_BCM_IPROC
tristate "Broadcom iProc MDIO bus controller"
@@ -49,6 +28,7 @@ config MDIO_BCM_UNIMAC
config MDIO_BITBANG
tristate "Bitbanged MDIO buses"
+ depends on !(MDIO_DEVICE=y && PHYLIB=m)
help
This module implements the MDIO bus protocol in software,
for use by low level drivers that export the ability to
@@ -160,6 +140,36 @@ config MDIO_XGENE
This module provides a driver for the MDIO busses found in the
APM X-Gene SoC's.
+endif
+
+menuconfig PHYLIB
+ tristate "PHY Device support and infrastructure"
+ depends on NETDEVICES
+ select MDIO_DEVICE
+ help
+ Ethernet controllers are usually attached to PHY
+ devices. This option provides infrastructure for
+ managing PHY devices.
+
+if PHYLIB
+
+config SWPHY
+ bool
+
+config LED_TRIGGER_PHY
+ bool "Support LED triggers for tracking link state"
+ depends on LEDS_TRIGGERS
+ ---help---
+ Adds support for a set of LED trigger events per-PHY. Link
+ state change will trigger the events, for consumption by an
+ LED class driver. There are triggers for each link speed currently
+ supported by the phy, and are of the form:
+ <mii bus id>:<phy>:<speed>
+
+ Where speed is in the form:
+ <Speed in megabits>Mbps or <Speed in gigabits>Gbps
+
+
comment "MII PHY device drivers"
config AMD_PHY
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 82d915614646..0e1ec0438c23 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,7 +1,16 @@
# Makefile for Linux PHY drivers and MDIO bus drivers
-libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o \
- mdio-boardinfo.o phy-core.o
+libphy-y := phy.o phy-core.o phy_device.o
+mdio-bus-y += mdio_bus.o mdio_device.o mdio-boardinfo.o
+
+# PHYLIB implies MDIO_DEVICE, in that case, we have a bunch of circular
+# dependencies that does not make it possible to split mdio-bus objects into a
+# dedicated loadable module, so we bundle them all together into libphy.ko
+ifdef CONFIG_PHYLIB
+libphy-y += $(mdio-bus-y)
+else
+obj-$(CONFIG_MDIO_DEVICE) += mdio-bus.o
+endif
libphy-$(CONFIG_SWPHY) += swphy.o
libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
diff --git a/drivers/net/phy/mdio-boardinfo.c b/drivers/net/phy/mdio-boardinfo.c
index 6b988f77da08..61941e29daae 100644
--- a/drivers/net/phy/mdio-boardinfo.c
+++ b/drivers/net/phy/mdio-boardinfo.c
@@ -84,3 +84,4 @@ int mdiobus_register_board_info(const struct mdio_board_info *info,
return 0;
}
+EXPORT_SYMBOL(mdiobus_register_board_info);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index fa7d51f14869..46b468eb6e12 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -648,9 +648,18 @@ int __init mdio_bus_init(void)
return ret;
}
+EXPORT_SYMBOL_GPL(mdio_bus_init);
+#if IS_ENABLED(CONFIG_PHYLIB)
void mdio_bus_exit(void)
{
class_unregister(&mdio_bus_class);
bus_unregister(&mdio_bus_type);
}
+EXPORT_SYMBOL_GPL(mdio_bus_exit);
+#else
+module_init(mdio_bus_init);
+/* no module_exit, intentional */
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MDIO bus/device layer");
+#endif
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2efca6b39fba..624cecf69c28 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -745,8 +745,24 @@ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
bool is_c45,
struct phy_c45_device_ids *c45_ids);
+#if IS_ENABLED(CONFIG_PHYLIB)
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
int phy_device_register(struct phy_device *phy);
+void phy_device_free(struct phy_device *phydev);
+#else
+static inline
+struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
+{
+ return NULL;
+}
+
+static inline int phy_device_register(struct phy_device *phy)
+{
+ return 0;
+}
+
+static inline void phy_device_free(struct phy_device *phydev) { }
+#endif /* CONFIG_PHYLIB */
void phy_device_remove(struct phy_device *phydev);
int phy_init_hw(struct phy_device *phydev);
int phy_suspend(struct phy_device *phydev);
@@ -827,7 +843,6 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev,
int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
-void phy_device_free(struct phy_device *phydev);
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
@@ -854,8 +869,10 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev,
const struct ethtool_link_ksettings *cmd);
int phy_ethtool_nway_reset(struct net_device *ndev);
+#if IS_ENABLED(CONFIG_PHYLIB)
int __init mdio_bus_init(void);
void mdio_bus_exit(void);
+#endif
extern struct bus_type mdio_bus_type;
@@ -866,7 +883,7 @@ struct mdio_board_info {
const void *platform_data;
};
-#if IS_ENABLED(CONFIG_PHYLIB)
+#if IS_ENABLED(CONFIG_MDIO_DEVICE)
int mdiobus_register_board_info(const struct mdio_board_info *info,
unsigned int n);
#else