summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/kernel/etm.c4
-rw-r--r--drivers/amba/bus.c348
-rw-r--r--drivers/char/hw_random/nomadik-rng.c2
-rw-r--r--drivers/dma/amba-pl08x.c2
-rw-r--r--drivers/dma/pl330.c2
-rw-r--r--drivers/gpio/pl061.c2
-rw-r--r--drivers/input/serio/ambakmi.c3
-rw-r--r--drivers/mmc/host/mmci.c348
-rw-r--r--drivers/mmc/host/mmci.h15
-rw-r--r--drivers/rtc/rtc-pl030.c2
-rw-r--r--drivers/rtc/rtc-pl031.c2
-rw-r--r--drivers/spi/amba-pl022.c2
-rw-r--r--drivers/tty/serial/amba-pl010.c2
-rw-r--r--drivers/tty/serial/amba-pl011.c2
-rw-r--r--drivers/video/amba-clcd.c2
-rw-r--r--drivers/watchdog/sp805_wdt.c2
-rw-r--r--include/linux/amba/bus.h8
-rw-r--r--include/linux/amba/mmci.h17
-rw-r--r--sound/arm/aaci.c285
-rw-r--r--sound/arm/aaci.h9
20 files changed, 811 insertions, 248 deletions
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 11db62806a1a..052b509e2d5f 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -338,7 +338,7 @@ static struct miscdevice etb_miscdev = {
.fops = &etb_fops,
};
-static int __init etb_probe(struct amba_device *dev, struct amba_id *id)
+static int __init etb_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;
@@ -530,7 +530,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
static struct kobj_attribute trace_mode_attr =
__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
-static int __init etm_probe(struct amba_device *dev, struct amba_id *id)
+static int __init etm_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index e7df019d29d4..6d2bb2524b6e 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -13,16 +13,17 @@
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/amba/bus.h>
#include <asm/irq.h>
#include <asm/sizes.h>
-#define to_amba_device(d) container_of(d, struct amba_device, dev)
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
-static struct amba_id *
-amba_lookup(struct amba_id *table, struct amba_device *dev)
+static const struct amba_id *
+amba_lookup(const struct amba_id *table, struct amba_device *dev)
{
int ret = 0;
@@ -57,26 +58,6 @@ static int amba_uevent(struct device *dev, struct kobj_uevent_env *env)
#define amba_uevent NULL
#endif
-static int amba_suspend(struct device *dev, pm_message_t state)
-{
- struct amba_driver *drv = to_amba_driver(dev->driver);
- int ret = 0;
-
- if (dev->driver && drv->suspend)
- ret = drv->suspend(to_amba_device(dev), state);
- return ret;
-}
-
-static int amba_resume(struct device *dev)
-{
- struct amba_driver *drv = to_amba_driver(dev->driver);
- int ret = 0;
-
- if (dev->driver && drv->resume)
- ret = drv->resume(to_amba_device(dev));
- return ret;
-}
-
#define amba_attr_func(name,fmt,arg...) \
static ssize_t name##_show(struct device *_dev, \
struct device_attribute *attr, char *buf) \
@@ -102,17 +83,330 @@ static struct device_attribute amba_dev_attrs[] = {
__ATTR_NULL,
};
+#ifdef CONFIG_PM_SLEEP
+
+static int amba_legacy_suspend(struct device *dev, pm_message_t mesg)
+{
+ struct amba_driver *adrv = to_amba_driver(dev->driver);
+ struct amba_device *adev = to_amba_device(dev);
+ int ret = 0;
+
+ if (dev->driver && adrv->suspend)
+ ret = adrv->suspend(adev, mesg);
+
+ return ret;
+}
+
+static int amba_legacy_resume(struct device *dev)
+{
+ struct amba_driver *adrv = to_amba_driver(dev->driver);
+ struct amba_device *adev = to_amba_device(dev);
+ int ret = 0;
+
+ if (dev->driver && adrv->resume)
+ ret = adrv->resume(adev);
+
+ return ret;
+}
+
+static int amba_pm_prepare(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm && drv->pm->prepare)
+ ret = drv->pm->prepare(dev);
+
+ return ret;
+}
+
+static void amba_pm_complete(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->pm && drv->pm->complete)
+ drv->pm->complete(dev);
+}
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define amba_pm_prepare NULL
+#define amba_pm_complete NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_SUSPEND
+
+static int amba_pm_suspend(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->suspend)
+ ret = drv->pm->suspend(dev);
+ } else {
+ ret = amba_legacy_suspend(dev, PMSG_SUSPEND);
+ }
+
+ return ret;
+}
+
+static int amba_pm_suspend_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->suspend_noirq)
+ ret = drv->pm->suspend_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_resume(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->resume)
+ ret = drv->pm->resume(dev);
+ } else {
+ ret = amba_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_resume_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->resume_noirq)
+ ret = drv->pm->resume_noirq(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_SUSPEND */
+
+#define amba_pm_suspend NULL
+#define amba_pm_resume NULL
+#define amba_pm_suspend_noirq NULL
+#define amba_pm_resume_noirq NULL
+
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
+
+static int amba_pm_freeze(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->freeze)
+ ret = drv->pm->freeze(dev);
+ } else {
+ ret = amba_legacy_suspend(dev, PMSG_FREEZE);
+ }
+
+ return ret;
+}
+
+static int amba_pm_freeze_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->freeze_noirq)
+ ret = drv->pm->freeze_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_thaw(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->thaw)
+ ret = drv->pm->thaw(dev);
+ } else {
+ ret = amba_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_thaw_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->thaw_noirq)
+ ret = drv->pm->thaw_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_poweroff(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->poweroff)
+ ret = drv->pm->poweroff(dev);
+ } else {
+ ret = amba_legacy_suspend(dev, PMSG_HIBERNATE);
+ }
+
+ return ret;
+}
+
+static int amba_pm_poweroff_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->poweroff_noirq)
+ ret = drv->pm->poweroff_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_restore(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->restore)
+ ret = drv->pm->restore(dev);
+ } else {
+ ret = amba_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_restore_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->restore_noirq)
+ ret = drv->pm->restore_noirq(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_HIBERNATION */
+
+#define amba_pm_freeze NULL
+#define amba_pm_thaw NULL
+#define amba_pm_poweroff NULL
+#define amba_pm_restore NULL
+#define amba_pm_freeze_noirq NULL
+#define amba_pm_thaw_noirq NULL
+#define amba_pm_poweroff_noirq NULL
+#define amba_pm_restore_noirq NULL
+
+#endif /* !CONFIG_HIBERNATION */
+
+#ifdef CONFIG_PM
+
+static const struct dev_pm_ops amba_pm = {
+ .prepare = amba_pm_prepare,
+ .complete = amba_pm_complete,
+ .suspend = amba_pm_suspend,
+ .resume = amba_pm_resume,
+ .freeze = amba_pm_freeze,
+ .thaw = amba_pm_thaw,
+ .poweroff = amba_pm_poweroff,
+ .restore = amba_pm_restore,
+ .suspend_noirq = amba_pm_suspend_noirq,
+ .resume_noirq = amba_pm_resume_noirq,
+ .freeze_noirq = amba_pm_freeze_noirq,
+ .thaw_noirq = amba_pm_thaw_noirq,
+ .poweroff_noirq = amba_pm_poweroff_noirq,
+ .restore_noirq = amba_pm_restore_noirq,
+ SET_RUNTIME_PM_OPS(
+ pm_generic_runtime_suspend,
+ pm_generic_runtime_resume,
+ pm_generic_runtime_idle
+ )
+};
+
+#define AMBA_PM (&amba_pm)
+
+#else /* !CONFIG_PM */
+
+#define AMBA_PM NULL
+
+#endif /* !CONFIG_PM */
+
/*
* Primecells are part of the Advanced Microcontroller Bus Architecture,
* so we call the bus "amba".
*/
-static struct bus_type amba_bustype = {
+struct bus_type amba_bustype = {
.name = "amba",
.dev_attrs = amba_dev_attrs,
.match = amba_match,
.uevent = amba_uevent,
- .suspend = amba_suspend,
- .resume = amba_resume,
+ .pm = AMBA_PM,
};
static int __init amba_init(void)
@@ -188,7 +482,7 @@ static int amba_probe(struct device *dev)
{
struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *pcdrv = to_amba_driver(dev->driver);
- struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
+ const struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
int ret;
do {
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
index a348c7e9aa0b..dd1d143eb8ea 100644
--- a/drivers/char/hw_random/nomadik-rng.c
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -39,7 +39,7 @@ static struct hwrng nmk_rng = {
.read = nmk_rng_read,
};
-static int nmk_rng_probe(struct amba_device *dev, struct amba_id *id)
+static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id)
{
void __iomem *base;
int ret;
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 07bca4970e50..e6d7228b1479 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -1845,7 +1845,7 @@ static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
}
#endif
-static int pl08x_probe(struct amba_device *adev, struct amba_id *id)
+static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
{
struct pl08x_driver_data *pl08x;
const struct vendor_data *vd = id->data;
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 7c50f6dfd3f4..6abe1ec1f2ce 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -657,7 +657,7 @@ static irqreturn_t pl330_irq_handler(int irq, void *data)
}
static int __devinit
-pl330_probe(struct amba_device *adev, struct amba_id *id)
+pl330_probe(struct amba_device *adev, const struct amba_id *id)
{
struct dma_pl330_platdata *pdat;
struct dma_pl330_dmac *pdmac;
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index 2975d22daffe..838ddbdf90cc 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -232,7 +232,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
-static int pl061_probe(struct amba_device *dev, struct amba_id *id)
+static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
{
struct pl061_platform_data *pdata;
struct pl061_gpio *chip;
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index 92563a681d65..12abc50508e5 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -107,7 +107,8 @@ static void amba_kmi_close(struct serio *io)
clk_disable(kmi->clk);
}
-static int __devinit amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
+static int __devinit amba_kmi_probe(struct amba_device *dev,
+ const struct amba_id *id)
{
struct amba_kmi_port *kmi;
struct serio *io;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 2d6de3e03e2d..5bbb87d10251 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2,7 +2,7 @@
* linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- * Copyright (C) 2010 ST-Ericsson AB.
+ * Copyright (C) 2010 ST-Ericsson SA
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -25,8 +25,10 @@
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/gpio.h>
-#include <linux/amba/mmci.h>
#include <linux/regulator/consumer.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/amba/mmci.h>
#include <asm/div64.h>
#include <asm/io.h>
@@ -142,9 +144,6 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
host->mrq = NULL;
host->cmd = NULL;
- if (mrq->data)
- mrq->data->bytes_xfered = host->data_xfered;
-
/*
* Need to drop the host lock here; mmc_request_done may call
* back into the driver...
@@ -189,6 +188,248 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
}
+/*
+ * All the DMA operation mode stuff goes inside this ifdef.
+ * This assumes that you have a generic DMA device interface,
+ * no custom DMA interfaces are supported.
+ */
+#ifdef CONFIG_DMA_ENGINE
+static void __devinit mmci_dma_setup(struct mmci_host *host)
+{
+ struct mmci_platform_data *plat = host->plat;
+ const char *rxname, *txname;
+ dma_cap_mask_t mask;
+
+ if (!plat || !plat->dma_filter) {
+ dev_info(mmc_dev(host->mmc), "no DMA platform data\n");
+ return;
+ }
+
+ /* Try to acquire a generic DMA engine slave channel */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /*
+ * If only an RX channel is specified, the driver will
+ * attempt to use it bidirectionally, however if it is
+ * is specified but cannot be located, DMA will be disabled.
+ */
+ if (plat->dma_rx_param) {
+ host->dma_rx_channel = dma_request_channel(mask,
+ plat->dma_filter,
+ plat->dma_rx_param);
+ /* E.g if no DMA hardware is present */
+ if (!host->dma_rx_channel)
+ dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
+ }
+
+ if (plat->dma_tx_param) {
+ host->dma_tx_channel = dma_request_channel(mask,
+ plat->dma_filter,
+ plat->dma_tx_param);
+ if (!host->dma_tx_channel)
+ dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
+ } else {
+ host->dma_tx_channel = host->dma_rx_channel;
+ }
+
+ if (host->dma_rx_channel)
+ rxname = dma_chan_name(host->dma_rx_channel);
+ else
+ rxname = "none";
+
+ if (host->dma_tx_channel)
+ txname = dma_chan_name(host->dma_tx_channel);
+ else
+ txname = "none";
+
+ dev_info(mmc_dev(host->mmc), "DMA channels RX %s, TX %s\n",
+ rxname, txname);
+
+ /*
+ * Limit the maximum segment size in any SG entry according to
+ * the parameters of the DMA engine device.
+ */
+ if (host->dma_tx_channel) {
+ struct device *dev = host->dma_tx_channel->device->dev;
+ unsigned int max_seg_size = dma_get_max_seg_size(dev);
+
+ if (max_seg_size < host->mmc->max_seg_size)
+ host->mmc->max_seg_size = max_seg_size;
+ }
+ if (host->dma_rx_channel) {
+ struct device *dev = host->dma_rx_channel->device->dev;
+ unsigned int max_seg_size = dma_get_max_seg_size(dev);
+
+ if (max_seg_size < host->mmc->max_seg_size)
+ host->mmc->max_seg_size = max_seg_size;
+ }
+}
+
+/*
+ * This is used in __devinit or __devexit so inline it
+ * so it can be discarded.
+ */
+static inline void mmci_dma_release(struct mmci_host *host)
+{
+ struct mmci_platform_data *plat = host->plat;
+
+ if (host->dma_rx_channel)
+ dma_release_channel(host->dma_rx_channel);
+ if (host->dma_tx_channel && plat->dma_tx_param)
+ dma_release_channel(host->dma_tx_channel);
+ host->dma_rx_channel = host->dma_tx_channel = NULL;
+}
+
+static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
+{
+ struct dma_chan *chan = host->dma_current;
+ enum dma_data_direction dir;
+ u32 status;
+ int i;
+
+ /* Wait up to 1ms for the DMA to complete */
+ for (i = 0; ; i++) {
+ status = readl(host->base + MMCISTATUS);
+ if (!(status & MCI_RXDATAAVLBLMASK) || i >= 100)
+ break;
+ udelay(10);
+ }
+
+ /*
+ * Check to see whether we still have some data left in the FIFO -
+ * this catches DMA controllers which are unable to monitor the
+ * DMALBREQ and DMALSREQ signals while allowing us to DMA to non-
+ * contiguous buffers. On TX, we'll get a FIFO underrun error.
+ */
+ if (status & MCI_RXDATAAVLBLMASK) {
+ dmaengine_terminate_all(chan);
+ if (!data->error)
+ data->error = -EIO;
+ }
+
+ if (data->flags & MMC_DATA_WRITE) {
+ dir = DMA_TO_DEVICE;
+ } else {
+ dir = DMA_FROM_DEVICE;
+ }
+
+ dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir);
+
+ /*
+ * Use of DMA with scatter-gather is impossible.
+ * Give up with DMA and switch back to PIO mode.
+ */
+ if (status & MCI_RXDATAAVLBLMASK) {
+ dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n");
+ mmci_dma_release(host);
+ }
+}
+
+static void mmci_dma_data_error(struct mmci_host *host)
+{
+ dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
+ dmaengine_terminate_all(host->dma_current);
+}
+
+static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
+{
+ struct variant_data *variant = host->variant;
+ struct dma_slave_config conf = {
+ .src_addr = host->phybase + MMCIFIFO,
+ .dst_addr = host->phybase + MMCIFIFO,
+ .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .src_maxburst = variant->fifohalfsize >> 2, /* # of words */
+ .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */
+ };
+ struct mmc_data *data = host->data;
+ struct dma_chan *chan;
+ struct dma_device *device;
+ struct dma_async_tx_descriptor *desc;
+ int nr_sg;
+
+ host->dma_current = NULL;
+
+ if (data->flags & MMC_DATA_READ) {
+ conf.direction = DMA_FROM_DEVICE;
+ chan = host->dma_rx_channel;
+ } else {
+ conf.direction = DMA_TO_DEVICE;
+ chan = host->dma_tx_channel;
+ }
+
+ /* If there's no DMA channel, fall back to PIO */
+ if (!chan)
+ return -EINVAL;
+
+ /* If less than or equal to the fifo size, don't bother with DMA */
+ if (host->size <= variant->fifosize)
+ return -EINVAL;
+
+ device = chan->device;
+ nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, conf.direction);
+ if (nr_sg == 0)
+ return -EINVAL;
+
+ dmaengine_slave_config(chan, &conf);
+ desc = device->device_prep_slave_sg(chan, data->sg, nr_sg,
+ conf.direction, DMA_CTRL_ACK);
+ if (!desc)
+ goto unmap_exit;
+
+ /* Okay, go for it. */
+ host->dma_current = chan;
+
+ dev_vdbg(mmc_dev(host->mmc),
+ "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n",
+ data->sg_len, data->blksz, data->blocks, data->flags);
+ dmaengine_submit(desc);
+ dma_async_issue_pending(chan);
+
+ datactrl |= MCI_DPSM_DMAENABLE;
+
+ /* Trigger the DMA transfer */
+ writel(datactrl, host->base + MMCIDATACTRL);
+
+ /*
+ * Let the MMCI say when the data is ended and it's time
+ * to fire next DMA request. When that happens, MMCI will
+ * call mmci_data_end()
+ */
+ writel(readl(host->base + MMCIMASK0) | MCI_DATAENDMASK,
+ host->base + MMCIMASK0);
+ return 0;
+
+unmap_exit:
+ dmaengine_terminate_all(chan);
+ dma_unmap_sg(device->dev, data->sg, data->sg_len, conf.direction);
+ return -ENOMEM;
+}
+#else
+/* Blank functions if the DMA engine is not available */
+static inline void mmci_dma_setup(struct mmci_host *host)
+{
+}
+
+static inline void mmci_dma_release(struct mmci_host *host)
+{
+}
+
+static inline void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
+{
+}
+
+static inline void mmci_dma_data_error(struct mmci_host *host)
+{
+}
+
+static inline int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
+{
+ return -ENOSYS;
+}
+#endif
+
static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
{
struct variant_data *variant = host->variant;
@@ -202,9 +443,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
host->data = data;
host->size = data->blksz * data->blocks;
- host->data_xfered = 0;
-
- mmci_init_sg(host, data);
+ data->bytes_xfered = 0;
clks = (unsigned long long)data->timeout_ns * host->cclk;
do_div(clks, 1000000000UL);
@@ -219,15 +458,29 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
BUG_ON(1 << blksz_bits != data->blksz);
datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
- if (data->flags & MMC_DATA_READ) {
+
+ if (data->flags & MMC_DATA_READ)
datactrl |= MCI_DPSM_DIRECTION;
+
+ /*
+ * Attempt to use DMA operation mode, if this
+ * should fail, fall back to PIO mode
+ */
+ if (!mmci_dma_start_data(host, datactrl))
+ return;
+
+ /* IRQ mode, map the SG list for CPU reading/writing */
+ mmci_init_sg(host, data);
+
+ if (data->flags & MMC_DATA_READ) {
irqmask = MCI_RXFIFOHALFFULLMASK;
/*
- * If we have less than a FIFOSIZE of bytes to transfer,
- * trigger a PIO interrupt as soon as any data is available.
+ * If we have less than the fifo 'half-full' threshold to
+ * transfer, trigger a PIO interrupt as soon as any data
+ * is available.
*/
- if (host->size < variant->fifosize)
+ if (host->size < variant->fifohalfsize)
irqmask |= MCI_RXDATAAVLBLMASK;
} else {
/*
@@ -283,49 +536,51 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
u32 remain, success;
- /* Calculate how far we are into the transfer */
+ /* Terminate the DMA transfer */
+ if (dma_inprogress(host))
+ mmci_dma_data_error(host);
+
+ /*
+ * Calculate how far we are into the transfer. Note that
+ * the data counter gives the number of bytes transferred
+ * on the MMC bus, not on the host side. On reads, this
+ * can be as much as a FIFO-worth of data ahead. This
+ * matters for FIFO overruns only.
+ */
remain = readl(host->base + MMCIDATACNT);
success = data->blksz * data->blocks - remain;
- dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
+ dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n",
+ status, success);
if (status & MCI_DATACRCFAIL) {
/* Last block was not successful */
- host->data_xfered = round_down(success - 1, data->blksz);
+ success -= 1;
data->error = -EILSEQ;
} else if (status & MCI_DATATIMEOUT) {
- host->data_xfered = round_down(success, data->blksz);
data->error = -ETIMEDOUT;
- } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
- host->data_xfered = round_down(success, data->blksz);
+ } else if (status & MCI_TXUNDERRUN) {
+ data->error = -EIO;
+ } else if (status & MCI_RXOVERRUN) {
+ if (success > host->variant->fifosize)
+ success -= host->variant->fifosize;
+ else
+ success = 0;
data->error = -EIO;
}
-
- /*
- * We hit an error condition. Ensure that any data
- * partially written to a page is properly coherent.
- */
- if (data->flags & MMC_DATA_READ) {
- struct sg_mapping_iter *sg_miter = &host->sg_miter;
- unsigned long flags;
-
- local_irq_save(flags);
- if (sg_miter_next(sg_miter)) {
- flush_dcache_page(sg_miter->page);
- sg_miter_stop(sg_miter);
- }
- local_irq_restore(flags);
- }
+ data->bytes_xfered = round_down(success, data->blksz);
}
if (status & MCI_DATABLOCKEND)
dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n");
if (status & MCI_DATAEND || data->error) {
+ if (dma_inprogress(host))
+ mmci_dma_unmap(host, data);
mmci_stop_data(host);
if (!data->error)
/* The error clause is handled above, success! */
- host->data_xfered += data->blksz * data->blocks;
+ data->bytes_xfered = data->blksz * data->blocks;
if (!data->stop) {
mmci_request_end(host, data->mrq);
@@ -498,9 +753,6 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
if (remain)
break;
- if (status & MCI_RXACTIVE)
- flush_dcache_page(sg_miter->page);
-
status = readl(base + MMCISTATUS);
} while (1);
@@ -509,10 +761,10 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
local_irq_restore(flags);
/*
- * If we're nearing the end of the read, switch to
- * "any data available" mode.
+ * If we have less than the fifo 'half-full' threshold to transfer,
+ * trigger a PIO interrupt as soon as any data is available.
*/
- if (status & MCI_RXACTIVE && host->size < variant->fifosize)
+ if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize)
mmci_set_mask1(host, MCI_RXDATAAVLBLMASK);
/*
@@ -713,7 +965,8 @@ static const struct mmc_host_ops mmci_ops = {
.get_cd = mmci_get_cd,
};
-static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
+static int __devinit mmci_probe(struct amba_device *dev,
+ const struct amba_id *id)
{
struct mmci_platform_data *plat = dev->dev.platform_data;
struct variant_data *variant = id->data;
@@ -776,6 +1029,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
host->mclk);
}
+ host->phybase = dev->res.start;
host->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!host->base) {
ret = -ENOMEM;
@@ -903,9 +1157,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
amba_set_drvdata(dev, mmc);
- dev_info(&dev->dev, "%s: PL%03x rev%u at 0x%08llx irq %d,%d\n",
- mmc_hostname(mmc), amba_part(dev), amba_rev(dev),
- (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
+ dev_info(&dev->dev, "%s: PL%03x manf %x rev%u at 0x%08llx irq %d,%d (pio)\n",
+ mmc_hostname(mmc), amba_part(dev), amba_manf(dev),
+ amba_rev(dev), (unsigned long long)dev->res.start,
+ dev->irq[0], dev->irq[1]);
+
+ mmci_dma_setup(host);
mmc_add_host(mmc);
@@ -952,6 +1209,7 @@ static int __devexit mmci_remove(struct amba_device *dev)
writel(0, host->base + MMCICOMMAND);
writel(0, host->base + MMCIDATACTRL);
+ mmci_dma_release(host);
free_irq(dev->irq[0], host);
if (!host->singleirq)
free_irq(dev->irq[1], host);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index c1df7b82d36c..ec9a7bc6d0df 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -148,8 +148,10 @@
struct clk;
struct variant_data;
+struct dma_chan;
struct mmci_host {
+ phys_addr_t phybase;
void __iomem *base;
struct mmc_request *mrq;
struct mmc_command *cmd;
@@ -161,8 +163,6 @@ struct mmci_host {
int gpio_cd_irq;
bool singleirq;
- unsigned int data_xfered;
-
spinlock_t lock;
unsigned int mclk;
@@ -181,5 +181,16 @@ struct mmci_host {
struct sg_mapping_iter sg_miter;
unsigned int size;
struct regulator *vcc;
+
+#ifdef CONFIG_DMA_ENGINE
+ /* DMA stuff */
+ struct dma_chan *dma_current;
+ struct dma_chan *dma_rx_channel;
+ struct dma_chan *dma_tx_channel;
+
+#define dma_inprogress(host) ((host)->dma_current)
+#else
+#define dma_inprogress(host) (0)
+#endif
};
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index bbdb2f02798a..baff724cd40f 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -103,7 +103,7 @@ static const struct rtc_class_ops pl030_ops = {
.set_alarm = pl030_set_alarm,
};
-static int pl030_probe(struct amba_device *dev, struct amba_id *id)
+static int pl030_probe(struct amba_device *dev, const struct amba_id *id)
{
struct pl030_rtc *rtc;
int ret;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index b7a6690e5b35..6568f4b37e19 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -358,7 +358,7 @@ static int pl031_remove(struct amba_device *adev)
return 0;
}
-static int pl031_probe(struct amba_device *adev, struct amba_id *id)
+static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret;
struct pl031_local *ldata;
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 71a1219a995d..95e58c70a2c9 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -2021,7 +2021,7 @@ static void pl022_cleanup(struct spi_device *spi)
static int __devinit
-pl022_probe(struct amba_device *adev, struct amba_id *id)
+pl022_probe(struct amba_device *adev, const struct amba_id *id)
{
struct device *dev = &adev->dev;
struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 2904aa044126..d742dd2c525c 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -676,7 +676,7 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
-static int pl010_probe(struct amba_device *dev, struct amba_id *id)
+static int pl010_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
void __iomem *base;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index faa16ee6b022..57731e870085 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1738,7 +1738,7 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
-static int pl011_probe(struct amba_device *dev, struct amba_id *id)
+static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
struct vendor_data *vendor = id->data;
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index 1c2c68356ea7..013c8ce57205 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -461,7 +461,7 @@ static int clcdfb_register(struct clcd_fb *fb)
return ret;
}
-static int clcdfb_probe(struct amba_device *dev, struct amba_id *id)
+static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
{
struct clcd_board *board = dev->dev.platform_data;
struct clcd_fb *fb;
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 9127eda2145b..0a0efe713bc8 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -278,7 +278,7 @@ static struct miscdevice sp805_wdt_miscdev = {
};
static int __devinit
-sp805_wdt_probe(struct amba_device *adev, struct amba_id *id)
+sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 9e7f259346e1..fcbbe71a3cc1 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -43,12 +43,12 @@ struct amba_id {
struct amba_driver {
struct device_driver drv;
- int (*probe)(struct amba_device *, struct amba_id *);
+ int (*probe)(struct amba_device *, const struct amba_id *);
int (*remove)(struct amba_device *);
void (*shutdown)(struct amba_device *);
int (*suspend)(struct amba_device *, pm_message_t);
int (*resume)(struct amba_device *);
- struct amba_id *id_table;
+ const struct amba_id *id_table;
};
enum amba_vendor {
@@ -56,6 +56,10 @@ enum amba_vendor {
AMBA_VENDOR_ST = 0x80,
};
+extern struct bus_type amba_bustype;
+
+#define to_amba_device(d) container_of(d, struct amba_device, dev)
+
#define amba_get_drvdata(d) dev_get_drvdata(&d->dev)
#define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p)
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index f4ee9acc9721..f60227088b7b 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -6,6 +6,9 @@
#include <linux/mmc/host.h>
+/* Just some dummy forwarding */
+struct dma_chan;
+
/**
* struct mmci_platform_data - platform configuration for the MMCI
* (also known as PL180) block.
@@ -27,6 +30,17 @@
* @cd_invert: true if the gpio_cd pin value is active low
* @capabilities: the capabilities of the block as implemented in
* this platform, signify anything MMC_CAP_* from mmc/host.h
+ * @dma_filter: function used to select an apropriate RX and TX
+ * DMA channel to be used for DMA, if and only if you're deploying the
+ * generic DMA engine
+ * @dma_rx_param: parameter passed to the DMA allocation
+ * filter in order to select an apropriate RX channel. If
+ * there is a bidirectional RX+TX channel, then just specify
+ * this and leave dma_tx_param set to NULL
+ * @dma_tx_param: parameter passed to the DMA allocation
+ * filter in order to select an apropriate TX channel. If this
+ * is NULL the driver will attempt to use the RX channel as a
+ * bidirectional channel
*/
struct mmci_platform_data {
unsigned int f_max;
@@ -38,6 +52,9 @@ struct mmci_platform_data {
int gpio_cd;
bool cd_invert;
unsigned long capabilities;
+ bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+ void *dma_rx_param;
+ void *dma_tx_param;
};
#endif
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 7c1fc64cb53d..d0cead38d5fb 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -210,6 +210,7 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
if (mask & ISR_RXINTR) {
struct aaci_runtime *aacirun = &aaci->capture;
+ bool period_elapsed = false;
void *ptr;
if (!aacirun->substream || !aacirun->start) {
@@ -222,15 +223,12 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
ptr = aacirun->ptr;
do {
- unsigned int len = aacirun->fifosz;
+ unsigned int len = aacirun->fifo_bytes;
u32 val;
if (aacirun->bytes <= 0) {
aacirun->bytes += aacirun->period;
- aacirun->ptr = ptr;
- spin_unlock(&aacirun->lock);
- snd_pcm_period_elapsed(aacirun->substream);
- spin_lock(&aacirun->lock);
+ period_elapsed = true;
}
if (!(aacirun->cr & CR_EN))
break;
@@ -260,6 +258,9 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
aacirun->ptr = ptr;
spin_unlock(&aacirun->lock);
+
+ if (period_elapsed)
+ snd_pcm_period_elapsed(aacirun->substream);
}
if (mask & ISR_URINTR) {
@@ -269,6 +270,7 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
if (mask & ISR_TXINTR) {
struct aaci_runtime *aacirun = &aaci->playback;
+ bool period_elapsed = false;
void *ptr;
if (!aacirun->substream || !aacirun->start) {
@@ -281,15 +283,12 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
ptr = aacirun->ptr;
do {
- unsigned int len = aacirun->fifosz;
+ unsigned int len = aacirun->fifo_bytes;
u32 val;
if (aacirun->bytes <= 0) {
aacirun->bytes += aacirun->period;
- aacirun->ptr = ptr;
- spin_unlock(&aacirun->lock);
- snd_pcm_period_elapsed(aacirun->substream);
- spin_lock(&aacirun->lock);
+ period_elapsed = true;
}
if (!(aacirun->cr & CR_EN))
break;
@@ -319,6 +318,9 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
aacirun->ptr = ptr;
spin_unlock(&aacirun->lock);
+
+ if (period_elapsed)
+ snd_pcm_period_elapsed(aacirun->substream);
}
}
@@ -361,7 +363,7 @@ static struct snd_pcm_hardware aaci_hw_info = {
/* rates are setup from the AC'97 codec */
.channels_min = 2,
- .channels_max = 6,
+ .channels_max = 2,
.buffer_bytes_max = 64 * 1024,
.period_bytes_min = 256,
.period_bytes_max = PAGE_SIZE,
@@ -369,12 +371,46 @@ static struct snd_pcm_hardware aaci_hw_info = {
.periods_max = PAGE_SIZE / 16,
};
-static int __aaci_pcm_open(struct aaci *aaci,
- struct snd_pcm_substream *substream,
- struct aaci_runtime *aacirun)
+/*
+ * We can support two and four channel audio. Unfortunately
+ * six channel audio requires a non-standard channel ordering:
+ * 2 -> FL(3), FR(4)
+ * 4 -> FL(3), FR(4), SL(7), SR(8)
+ * 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required)
+ * FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual)
+ * This requires an ALSA configuration file to correct.
+ */
+static int aaci_rule_channels(struct snd_pcm_hw_params *p,
+ struct snd_pcm_hw_rule *rule)
+{
+ static unsigned int channel_list[] = { 2, 4, 6 };
+ struct aaci *aaci = rule->private;
+ unsigned int mask = 1 << 0, slots;
+
+ /* pcms[0] is the our 5.1 PCM instance. */
+ slots = aaci->ac97_bus->pcms[0].r[0].slots;
+ if (slots & (1 << AC97_SLOT_PCM_SLEFT)) {
+ mask |= 1 << 1;
+ if (slots & (1 << AC97_SLOT_LFE))
+ mask |= 1 << 2;
+ }
+
+ return snd_interval_list(hw_param_interval(p, rule->var),
+ ARRAY_SIZE(channel_list), channel_list, mask);
+}
+
+static int aaci_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- int ret;
+ struct aaci *aaci = substream->private_data;
+ struct aaci_runtime *aacirun;
+ int ret = 0;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ aacirun = &aaci->playback;
+ } else {
+ aacirun = &aaci->capture;
+ }
aacirun->substream = substream;
runtime->private_data = aacirun;
@@ -382,27 +418,37 @@ static int __aaci_pcm_open(struct aaci *aaci,
runtime->hw.rates = aacirun->pcm->rates;
snd_pcm_limit_hw_rates(runtime);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
- aacirun->pcm->r[1].slots)
- snd_ac97_pcm_double_rate_rules(runtime);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ runtime->hw.channels_max = 6;
+
+ /* Add rule describing channel dependency. */
+ ret = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_CHANNELS,
+ aaci_rule_channels, aaci,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ if (ret)
+ return ret;
+
+ if (aacirun->pcm->r[1].slots)
+ snd_ac97_pcm_double_rate_rules(runtime);
+ }
/*
- * FIXME: ALSA specifies fifo_size in bytes. If we're in normal
- * mode, each 32-bit word contains one sample. If we're in
- * compact mode, each 32-bit word contains two samples, effectively
- * halving the FIFO size. However, we don't know for sure which
- * we'll be using at this point. We set this to the lower limit.
+ * ALSA wants the byte-size of the FIFOs. As we only support
+ * 16-bit samples, this is twice the FIFO depth irrespective
+ * of whether it's in compact mode or not.
*/
- runtime->hw.fifo_size = aaci->fifosize * 2;
-
- ret = request_irq(aaci->dev->irq[0], aaci_irq, IRQF_SHARED|IRQF_DISABLED,
- DRIVER_NAME, aaci);
- if (ret)
- goto out;
-
- return 0;
+ runtime->hw.fifo_size = aaci->fifo_depth * 2;
+
+ mutex_lock(&aaci->irq_lock);
+ if (!aaci->users++) {
+ ret = request_irq(aaci->dev->irq[0], aaci_irq,
+ IRQF_SHARED | IRQF_DISABLED, DRIVER_NAME, aaci);
+ if (ret != 0)
+ aaci->users--;
+ }
+ mutex_unlock(&aaci->irq_lock);
- out:
return ret;
}
@@ -418,7 +464,11 @@ static int aaci_pcm_close(struct snd_pcm_substream *substream)
WARN_ON(aacirun->cr & CR_EN);
aacirun->substream = NULL;
- free_irq(aaci->dev->irq[0], aaci);
+
+ mutex_lock(&aaci->irq_lock);
+ if (!--aaci->users)
+ free_irq(aaci->dev->irq[0], aaci);
+ mutex_unlock(&aaci->irq_lock);
return 0;
}
@@ -444,12 +494,21 @@ static int aaci_pcm_hw_free(struct snd_pcm_substream *substream)
return 0;
}
+/* Channel to slot mask */
+static const u32 channels_to_slotmask[] = {
+ [2] = CR_SL3 | CR_SL4,
+ [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8,
+ [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9,
+};
+
static int aaci_pcm_hw_params(struct snd_pcm_substream *substream,
- struct aaci_runtime *aacirun,
struct snd_pcm_hw_params *params)
{
+ struct aaci_runtime *aacirun = substream->runtime->private_data;
+ unsigned int channels = params_channels(params);
+ unsigned int rate = params_rate(params);
+ int dbl = rate > 48000;
int err;
- struct aaci *aaci = substream->private_data;
aaci_pcm_hw_free(substream);
if (aacirun->pcm_open) {
@@ -457,22 +516,28 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream,
aacirun->pcm_open = 0;
}
+ /* channels is already limited to 2, 4, or 6 by aaci_rule_channels */
+ if (dbl && channels != 2)
+ return -EINVAL;
+
err = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(params));
if (err >= 0) {
- unsigned int rate = params_rate(params);
- int dbl = rate > 48000;
+ struct aaci *aaci = substream->private_data;
- err = snd_ac97_pcm_open(aacirun->pcm, rate,
- params_channels(params),
+ err = snd_ac97_pcm_open(aacirun->pcm, rate, channels,
aacirun->pcm->r[dbl].slots);
aacirun->pcm_open = err == 0;
aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16;
- aacirun->fifosz = aaci->fifosize * 4;
-
- if (aacirun->cr & CR_COMPACT)
- aacirun->fifosz >>= 1;
+ aacirun->cr |= channels_to_slotmask[channels + dbl * 2];
+
+ /*
+ * fifo_bytes is the number of bytes we transfer to/from
+ * the FIFO, including padding. So that's x4. As we're
+ * in compact mode, the FIFO is half the size.
+ */
+ aacirun->fifo_bytes = aaci->fifo_depth * 4 / 2;
}
return err;
@@ -483,11 +548,11 @@ static int aaci_pcm_prepare(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
struct aaci_runtime *aacirun = runtime->private_data;
+ aacirun->period = snd_pcm_lib_period_bytes(substream);
aacirun->start = runtime->dma_area;
aacirun->end = aacirun->start + snd_pcm_lib_buffer_bytes(substream);
aacirun->ptr = aacirun->start;
- aacirun->period =
- aacirun->bytes = frames_to_bytes(runtime, runtime->period_size);
+ aacirun->bytes = aacirun->period;
return 0;
}
@@ -505,89 +570,6 @@ static snd_pcm_uframes_t aaci_pcm_pointer(struct snd_pcm_substream *substream)
/*
* Playback specific ALSA stuff
*/
-static const u32 channels_to_txmask[] = {
- [2] = CR_SL3 | CR_SL4,
- [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8,
- [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9,
-};
-
-/*
- * We can support two and four channel audio. Unfortunately
- * six channel audio requires a non-standard channel ordering:
- * 2 -> FL(3), FR(4)
- * 4 -> FL(3), FR(4), SL(7), SR(8)
- * 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required)
- * FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual)
- * This requires an ALSA configuration file to correct.
- */
-static unsigned int channel_list[] = { 2, 4, 6 };
-
-static int
-aaci_rule_channels(struct snd_pcm_hw_params *p, struct snd_pcm_hw_rule *rule)
-{
- struct aaci *aaci = rule->private;
- unsigned int chan_mask = 1 << 0, slots;
-
- /*
- * pcms[0] is the our 5.1 PCM instance.
- */
- slots = aaci->ac97_bus->pcms[0].r[0].slots;
- if (slots & (1 << AC97_SLOT_PCM_SLEFT)) {
- chan_mask |= 1 << 1;
- if (slots & (1 << AC97_SLOT_LFE))
- chan_mask |= 1 << 2;
- }
-
- return snd_interval_list(hw_param_interval(p, rule->var),
- ARRAY_SIZE(channel_list), channel_list,
- chan_mask);
-}
-
-static int aaci_pcm_open(struct snd_pcm_substream *substream)
-{
- struct aaci *aaci = substream->private_data;
- int ret;
-
- /*
- * Add rule describing channel dependency.
- */
- ret = snd_pcm_hw_rule_add(substream->runtime, 0,
- SNDRV_PCM_HW_PARAM_CHANNELS,
- aaci_rule_channels, aaci,
- SNDRV_PCM_HW_PARAM_CHANNELS, -1);
- if (ret)
- return ret;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- ret = __aaci_pcm_open(aaci, substream, &aaci->playback);
- } else {
- ret = __aaci_pcm_open(aaci, substream, &aaci->capture);
- }
- return ret;
-}
-
-static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct aaci_runtime *aacirun = substream->runtime->private_data;
- unsigned int channels = params_channels(params);
- int ret;
-
- WARN_ON(channels >= ARRAY_SIZE(channels_to_txmask) ||
- !channels_to_txmask[channels]);
-
- ret = aaci_pcm_hw_params(substream, aacirun, params);
-
- /*
- * Enable FIFO, compact mode, 16 bits per sample.
- * FIXME: double rate slots?
- */
- if (ret >= 0)
- aacirun->cr |= channels_to_txmask[channels];
-
- return ret;
-}
-
static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun)
{
u32 ie;
@@ -657,27 +639,13 @@ static struct snd_pcm_ops aaci_playback_ops = {
.open = aaci_pcm_open,
.close = aaci_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
- .hw_params = aaci_pcm_playback_hw_params,
+ .hw_params = aaci_pcm_hw_params,
.hw_free = aaci_pcm_hw_free,
.prepare = aaci_pcm_prepare,
.trigger = aaci_pcm_playback_trigger,
.pointer = aaci_pcm_pointer,
};
-static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct aaci_runtime *aacirun = substream->runtime->private_data;
- int ret;
-
- ret = aaci_pcm_hw_params(substream, aacirun, params);
- if (ret >= 0)
- /* Line in record: slot 3 and 4 */
- aacirun->cr |= CR_SL3 | CR_SL4;
-
- return ret;
-}
-
static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun)
{
u32 ie;
@@ -774,7 +742,7 @@ static struct snd_pcm_ops aaci_capture_ops = {
.open = aaci_pcm_open,
.close = aaci_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
- .hw_params = aaci_pcm_capture_hw_params,
+ .hw_params = aaci_pcm_hw_params,
.hw_free = aaci_pcm_hw_free,
.prepare = aaci_pcm_capture_prepare,
.trigger = aaci_pcm_capture_trigger,
@@ -941,12 +909,13 @@ static struct aaci * __devinit aaci_init_card(struct amba_device *dev)
strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver));
strlcpy(card->shortname, "ARM AC'97 Interface", sizeof(card->shortname));
snprintf(card->longname, sizeof(card->longname),
- "%s at 0x%016llx, irq %d",
- card->shortname, (unsigned long long)dev->res.start,
- dev->irq[0]);
+ "%s PL%03x rev%u at 0x%08llx, irq %d",
+ card->shortname, amba_part(dev), amba_rev(dev),
+ (unsigned long long)dev->res.start, dev->irq[0]);
aaci = card->private_data;
mutex_init(&aaci->ac97_sem);
+ mutex_init(&aaci->irq_lock);
aaci->card = card;
aaci->dev = dev;
@@ -984,6 +953,10 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci)
struct aaci_runtime *aacirun = &aaci->playback;
int i;
+ /*
+ * Enable the channel, but don't assign it to any slots, so
+ * it won't empty onto the AC'97 link.
+ */
writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR);
for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++)
@@ -1002,7 +975,7 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci)
writel(aaci->maincr, aaci->base + AACI_MAINCR);
/*
- * If we hit 4096, we failed. Go back to the specified
+ * If we hit 4096 entries, we failed. Go back to the specified
* fifo depth.
*/
if (i == 4096)
@@ -1011,7 +984,8 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci)
return i;
}
-static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
+static int __devinit aaci_probe(struct amba_device *dev,
+ const struct amba_id *id)
{
struct aaci *aaci;
int ret, i;
@@ -1067,11 +1041,12 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
/*
* Size the FIFOs (must be multiple of 16).
+ * This is the number of entries in the FIFO.
*/
- aaci->fifosize = aaci_size_fifo(aaci);
- if (aaci->fifosize & 15) {
- printk(KERN_WARNING "AACI: fifosize = %d not supported\n",
- aaci->fifosize);
+ aaci->fifo_depth = aaci_size_fifo(aaci);
+ if (aaci->fifo_depth & 15) {
+ printk(KERN_WARNING "AACI: FIFO depth %d not supported\n",
+ aaci->fifo_depth);
ret = -ENODEV;
goto out;
}
@@ -1084,8 +1059,8 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
ret = snd_card_register(aaci->card);
if (ret == 0) {
- dev_info(&dev->dev, "%s, fifo %d\n", aaci->card->longname,
- aaci->fifosize);
+ dev_info(&dev->dev, "%s\n", aaci->card->longname);
+ dev_info(&dev->dev, "FIFO %u entries\n", aaci->fifo_depth);
amba_set_drvdata(dev, aaci->card);
return ret;
}
diff --git a/sound/arm/aaci.h b/sound/arm/aaci.h
index 6a4a2eebdda1..5791bd5bd2ab 100644
--- a/sound/arm/aaci.h
+++ b/sound/arm/aaci.h
@@ -210,6 +210,8 @@ struct aaci_runtime {
u32 cr;
struct snd_pcm_substream *substream;
+ unsigned int period; /* byte size of a "period" */
+
/*
* PIO support
*/
@@ -217,15 +219,16 @@ struct aaci_runtime {
void *end;
void *ptr;
int bytes;
- unsigned int period;
- unsigned int fifosz;
+ unsigned int fifo_bytes;
};
struct aaci {
struct amba_device *dev;
struct snd_card *card;
void __iomem *base;
- unsigned int fifosize;
+ unsigned int fifo_depth;
+ unsigned int users;
+ struct mutex irq_lock;
/* AC'97 */
struct mutex ac97_sem;