summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/spi/renesas,hspi.yaml57
-rw-r--r--Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt11
-rw-r--r--Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml159
-rw-r--r--Documentation/devicetree/bindings/spi/sh-hspi.txt26
-rw-r--r--Documentation/devicetree/bindings/spi/sh-msiof.txt105
-rw-r--r--Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt3
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sifive.txt37
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sifive.yaml86
-rw-r--r--Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt47
-rw-r--r--Documentation/devicetree/bindings/spi/spi-xilinx.txt4
-rw-r--r--Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml83
-rw-r--r--arch/arm/plat-pxa/ssp.c4
-rw-r--r--drivers/iio/imu/adis.c24
-rw-r--r--drivers/spi/Kconfig19
-rw-r--r--drivers/spi/spi-at91-usart.c4
-rw-r--r--drivers/spi/spi-atmel.c219
-rw-r--r--drivers/spi/spi-axi-spi-engine.c16
-rw-r--r--drivers/spi/spi-bcm-qspi.c7
-rw-r--r--drivers/spi/spi-bcm2835.c2
-rw-r--r--drivers/spi/spi-bcm63xx-hsspi.c3
-rw-r--r--drivers/spi/spi-bcm63xx.c2
-rw-r--r--drivers/spi/spi-cavium.c3
-rw-r--r--drivers/spi/spi-dw-mmio.c6
-rw-r--r--drivers/spi/spi-dw-pci.c24
-rw-r--r--drivers/spi/spi-dw.c4
-rw-r--r--drivers/spi/spi-dw.h1
-rw-r--r--drivers/spi/spi-falcon.c2
-rw-r--r--drivers/spi/spi-fsl-cpm.c3
-rw-r--r--drivers/spi/spi-fsl-dspi.c43
-rw-r--r--drivers/spi/spi-fsl-espi.c19
-rw-r--r--drivers/spi/spi-fsl-lpspi.c8
-rw-r--r--drivers/spi/spi-fsl-qspi.c55
-rw-r--r--drivers/spi/spi-fsl-spi.c3
-rw-r--r--drivers/spi/spi-gpio.c9
-rw-r--r--drivers/spi/spi-img-spfi.c2
-rw-r--r--drivers/spi/spi-imx.c4
-rw-r--r--drivers/spi/spi-lantiq-ssc.c10
-rw-r--r--drivers/spi/spi-loopback-test.c12
-rw-r--r--drivers/spi/spi-mem.c2
-rw-r--r--drivers/spi/spi-mpc512x-psc.c3
-rw-r--r--drivers/spi/spi-mpc52xx-psc.c3
-rw-r--r--drivers/spi/spi-mt65xx.c23
-rw-r--r--drivers/spi/spi-mxic.c8
-rw-r--r--drivers/spi/spi-npcm-pspi.c3
-rw-r--r--drivers/spi/spi-nxp-fspi.c2
-rw-r--r--drivers/spi/spi-omap-100k.c7
-rw-r--r--drivers/spi/spi-omap2-mcspi.c105
-rw-r--r--drivers/spi/spi-orion.c9
-rw-r--r--drivers/spi/spi-pic32.c46
-rw-r--r--drivers/spi/spi-pl022.c29
-rw-r--r--drivers/spi/spi-pxa2xx.c95
-rw-r--r--drivers/spi/spi-qup.c4
-rw-r--r--drivers/spi/spi-rspi.c8
-rw-r--r--drivers/spi/spi-s3c64xx.c6
-rw-r--r--drivers/spi/spi-sc18is602.c3
-rw-r--r--drivers/spi/spi-sh-hspi.c3
-rw-r--r--drivers/spi/spi-sifive.c11
-rw-r--r--drivers/spi/spi-slave-mt27xx.c12
-rw-r--r--drivers/spi/spi-sprd-adi.c8
-rw-r--r--drivers/spi/spi-sprd.c15
-rw-r--r--drivers/spi/spi-st-ssc4.c3
-rw-r--r--drivers/spi/spi-stm32-qspi.c3
-rw-r--r--drivers/spi/spi-tegra114.c42
-rw-r--r--drivers/spi/spi-tegra20-sflash.c5
-rw-r--r--drivers/spi/spi-tegra20-slink.c8
-rw-r--r--drivers/spi/spi-topcliff-pch.c7
-rw-r--r--drivers/spi/spi-txx9.c78
-rw-r--r--drivers/spi/spi-xcomm.c3
-rw-r--r--drivers/spi/spi-xilinx.c7
-rw-r--r--drivers/spi/spi-xtensa-xtfpga.c10
-rw-r--r--drivers/spi/spi-zynq-qspi.c84
-rw-r--r--drivers/spi/spi.c205
-rw-r--r--drivers/spi/spidev.c9
-rw-r--r--include/linux/platform_data/spi-mt65xx.h1
-rw-r--r--include/linux/pxa2xx_ssp.h2
-rw-r--r--include/linux/spi/spi.h71
-rw-r--r--sound/soc/pxa/mmp-sspa.c2
-rw-r--r--sound/soc/pxa/pxa-ssp.c10
78 files changed, 1321 insertions, 760 deletions
diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
new file mode 100644
index 000000000000..c429cf4bea5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,hspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas HSPI
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,hspi-r8a7778 # R-Car M1A
+ - renesas,hspi-r8a7779 # R-Car H1
+ - const: renesas,hspi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - '#address-cells'
+ - '#size-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7778-clock.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ hspi0: spi@fffc7000 {
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+ reg = <0xfffc7000 0x18>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
diff --git a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt b/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt
new file mode 100644
index 000000000000..fb1a6728638d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt
@@ -0,0 +1,11 @@
+Renesas RZ/N1 SPI Controller
+
+This controller is based on the Synopsys DW Synchronous Serial Interface and
+inherits all properties defined in snps,dw-apb-ssi.txt except for the
+compatible property.
+
+Required properties:
+- compatible : The device specific string followed by the generic RZ/N1 string.
+ Therefore it must be one of:
+ "renesas,r9a06g032-spi", "renesas,rzn1-spi"
+ "renesas,r9a06g033-spi", "renesas,rzn1-spi"
diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
new file mode 100644
index 000000000000..b6c1dd2a9c5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,sh-msiof.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas MSIOF SPI controller
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: renesas,msiof-sh73a0 # SH-Mobile AG5
+ - const: renesas,sh-mobile-msiof # generic SH-Mobile compatible
+ # device
+ - items:
+ - enum:
+ - renesas,msiof-r8a7743 # RZ/G1M
+ - renesas,msiof-r8a7744 # RZ/G1N
+ - renesas,msiof-r8a7745 # RZ/G1E
+ - renesas,msiof-r8a77470 # RZ/G1C
+ - renesas,msiof-r8a7790 # R-Car H2
+ - renesas,msiof-r8a7791 # R-Car M2-W
+ - renesas,msiof-r8a7792 # R-Car V2H
+ - renesas,msiof-r8a7793 # R-Car M2-N
+ - renesas,msiof-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-msiof # generic R-Car Gen2 and RZ/G1
+ # compatible device
+ - items:
+ - enum:
+ - renesas,msiof-r8a774a1 # RZ/G2M
+ - renesas,msiof-r8a774b1 # RZ/G2N
+ - renesas,msiof-r8a774c0 # RZ/G2E
+ - renesas,msiof-r8a7795 # R-Car H3
+ - renesas,msiof-r8a7796 # R-Car M3-W
+ - renesas,msiof-r8a77965 # R-Car M3-N
+ - renesas,msiof-r8a77970 # R-Car V3M
+ - renesas,msiof-r8a77980 # R-Car V3H
+ - renesas,msiof-r8a77990 # R-Car E3
+ - renesas,msiof-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-msiof # generic R-Car Gen3 and RZ/G2
+ # compatible device
+ - items:
+ - const: renesas,sh-msiof # deprecated
+
+ reg:
+ minItems: 1
+ maxItems: 2
+ oneOf:
+ - items:
+ - description: CPU and DMA engine registers
+ - items:
+ - description: CPU registers
+ - description: DMA engine registers
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ num-cs:
+ description: |
+ Total number of chip selects (default is 1).
+ Up to 3 native chip selects are supported:
+ 0: MSIOF_SYNC
+ 1: MSIOF_SS1
+ 2: MSIOF_SS2
+ Hardware limitations related to chip selects:
+ - Native chip selects are always deasserted in between transfers
+ that are part of the same message. Use cs-gpios to work around
+ this.
+ - All slaves using native chip selects must use the same spi-cs-high
+ configuration. Use cs-gpios to work around this.
+ - When using GPIO chip selects, at least one native chip select must
+ be left unused, as it will be driven anyway.
+ minimum: 1
+ maximum: 3
+ default: 1
+
+ dmas:
+ minItems: 2
+ maxItems: 4
+
+ dma-names:
+ minItems: 2
+ maxItems: 4
+ items:
+ enum: [ tx, rx ]
+
+ renesas,dtdl:
+ description: delay sync signal (setup) in transmit mode.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum:
+ - 0 # no bit delay
+ - 50 # 0.5-clock-cycle delay
+ - 100 # 1-clock-cycle delay
+ - 150 # 1.5-clock-cycle delay
+ - 200 # 2-clock-cycle delay
+
+ renesas,syncdl:
+ description: delay sync signal (hold) in transmit mode
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum:
+ - 0 # no bit delay
+ - 50 # 0.5-clock-cycle delay
+ - 100 # 1-clock-cycle delay
+ - 150 # 1.5-clock-cycle delay
+ - 200 # 2-clock-cycle delay
+ - 300 # 3-clock-cycle delay
+
+ renesas,tx-fifo-size:
+ # deprecated for soctype-specific bindings
+ description: |
+ Override the default TX fifo size. Unit is words. Ignored if 0.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - maxItems: 1
+ default: 64
+
+ renesas,rx-fifo-size:
+ # deprecated for soctype-specific bindings
+ description: |
+ Override the default RX fifo size. Unit is words. Ignored if 0.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - maxItems: 1
+ default: 64
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#address-cells'
+ - '#size-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7791-clock.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
deleted file mode 100644
index b9d1e4d11a77..000000000000
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Renesas HSPI.
-
-Required properties:
-- compatible : "renesas,hspi-<soctype>", "renesas,hspi" as fallback.
- Examples with soctypes are:
- - "renesas,hspi-r8a7778" (R-Car M1)
- - "renesas,hspi-r8a7779" (R-Car H1)
-- reg : Offset and length of the register set for the device
-- interrupts : Interrupt specifier
-- #address-cells : Must be <1>
-- #size-cells : Must be <0>
-
-Pinctrl properties might be needed, too. See
-Documentation/devicetree/bindings/pinctrl/renesas,*.
-
-Example:
-
- hspi0: spi@fffc7000 {
- compatible = "renesas,hspi-r8a7778", "renesas,hspi";
- reg = <0xfffc7000 0x18>;
- interrupt-parent = <&gic>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
deleted file mode 100644
index 18e14ee257b2..000000000000
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ /dev/null
@@ -1,105 +0,0 @@
-Renesas MSIOF spi controller
-
-Required properties:
-- compatible : "renesas,msiof-r8a7743" (RZ/G1M)
- "renesas,msiof-r8a7744" (RZ/G1N)
- "renesas,msiof-r8a7745" (RZ/G1E)
- "renesas,msiof-r8a77470" (RZ/G1C)
- "renesas,msiof-r8a774a1" (RZ/G2M)
- "renesas,msiof-r8a774c0" (RZ/G2E)
- "renesas,msiof-r8a7790" (R-Car H2)
- "renesas,msiof-r8a7791" (R-Car M2-W)
- "renesas,msiof-r8a7792" (R-Car V2H)
- "renesas,msiof-r8a7793" (R-Car M2-N)
- "renesas,msiof-r8a7794" (R-Car E2)
- "renesas,msiof-r8a7795" (R-Car H3)
- "renesas,msiof-r8a7796" (R-Car M3-W)
- "renesas,msiof-r8a77965" (R-Car M3-N)
- "renesas,msiof-r8a77970" (R-Car V3M)
- "renesas,msiof-r8a77980" (R-Car V3H)
- "renesas,msiof-r8a77990" (R-Car E3)
- "renesas,msiof-r8a77995" (R-Car D3)
- "renesas,msiof-sh73a0" (SH-Mobile AG5)
- "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
- "renesas,rcar-gen2-msiof" (generic R-Car Gen2 and RZ/G1 compatible device)
- "renesas,rcar-gen3-msiof" (generic R-Car Gen3 and RZ/G2 compatible device)
- "renesas,sh-msiof" (deprecated)
-
- When compatible with the generic version, nodes
- must list the SoC-specific version corresponding
- to the platform first followed by the generic
- version.
-
-- reg : A list of offsets and lengths of the register sets for
- the device.
- If only one register set is present, it is to be used
- by both the CPU and the DMA engine.
- If two register sets are present, the first is to be
- used by the CPU, and the second is to be used by the
- DMA engine.
-- interrupts : Interrupt specifier
-- #address-cells : Must be <1>
-- #size-cells : Must be <0>
-
-Optional properties:
-- clocks : Must contain a reference to the functional clock.
-- num-cs : Total number of chip selects (default is 1).
- Up to 3 native chip selects are supported:
- 0: MSIOF_SYNC
- 1: MSIOF_SS1
- 2: MSIOF_SS2
- Hardware limitations related to chip selects:
- - Native chip selects are always deasserted in
- between transfers that are part of the same
- message. Use cs-gpios to work around this.
- - All slaves using native chip selects must use the
- same spi-cs-high configuration. Use cs-gpios to
- work around this.
- - When using GPIO chip selects, at least one native
- chip select must be left unused, as it will be
- driven anyway.
-- dmas : Must contain a list of two references to DMA
- specifiers, one for transmission, and one for
- reception.
-- dma-names : Must contain a list of two DMA names, "tx" and "rx".
-- spi-slave : Empty property indicating the SPI controller is used
- in slave mode.
-- renesas,dtdl : delay sync signal (setup) in transmit mode.
- Must contain one of the following values:
- 0 (no bit delay)
- 50 (0.5-clock-cycle delay)
- 100 (1-clock-cycle delay)
- 150 (1.5-clock-cycle delay)
- 200 (2-clock-cycle delay)
-
-- renesas,syncdl : delay sync signal (hold) in transmit mode.
- Must contain one of the following values:
- 0 (no bit delay)
- 50 (0.5-clock-cycle delay)
- 100 (1-clock-cycle delay)
- 150 (1.5-clock-cycle delay)
- 200 (2-clock-cycle delay)
- 300 (3-clock-cycle delay)
-
-Optional properties, deprecated for soctype-specific bindings:
-- renesas,tx-fifo-size : Overrides the default tx fifo size given in words
- (default is 64)
-- renesas,rx-fifo-size : Overrides the default rx fifo size given in words
- (default is 64)
-
-Pinctrl properties might be needed, too. See
-Documentation/devicetree/bindings/pinctrl/renesas,*.
-
-Example:
-
- msiof0: spi@e6e20000 {
- compatible = "renesas,msiof-r8a7791",
- "renesas,rcar-gen2-msiof";
- reg = <0 0xe6e20000 0 0x0064>;
- interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
- dmas = <&dmac0 0x51>, <&dmac0 0x52>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index f54c8c36395e..3ed08ee9feba 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -16,7 +16,8 @@ Required properties:
Optional properties:
- clock-names : Contains the names of the clocks:
"ssi_clk", for the core clock used to generate the external SPI clock.
- "pclk", the interface clock, required for register access.
+ "pclk", the interface clock, required for register access. If a clock domain
+ used to enable this clock then it should be named "pclk_clkdomain".
- cs-gpios : Specifies the gpio pins to be used for chipselects.
- num-cs : The number of chipselects. If omitted, this will default to 4.
- reg-io-width : The I/O register width (in bytes) implemented by this
diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.txt b/Documentation/devicetree/bindings/spi/spi-sifive.txt
deleted file mode 100644
index 3f5c6e438972..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-sifive.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-SiFive SPI controller Device Tree Bindings
-------------------------------------------
-
-Required properties:
-- compatible : Should be "sifive,<chip>-spi" and "sifive,spi<version>".
- Supported compatible strings are:
- "sifive,fu540-c000-spi" for the SiFive SPI v0 as integrated
- onto the SiFive FU540 chip, and "sifive,spi0" for the SiFive
- SPI v0 IP block with no chip integration tweaks.
- Please refer to sifive-blocks-ip-versioning.txt for details
-- reg : Physical base address and size of SPI registers map
- A second (optional) range can indicate memory mapped flash
-- interrupts : Must contain one entry
-- interrupt-parent : Must be core interrupt controller
-- clocks : Must reference the frequency given to the controller
-- #address-cells : Must be '1', indicating which CS to use
-- #size-cells : Must be '0'
-
-Optional properties:
-- sifive,fifo-depth : Depth of hardware queues; defaults to 8
-- sifive,max-bits-per-word : Maximum bits per word; defaults to 8
-
-SPI RTL that corresponds to the IP block version numbers can be found here:
-https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi
-
-Example:
- spi: spi@10040000 {
- compatible = "sifive,fu540-c000-spi", "sifive,spi0";
- reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>;
- interrupt-parent = <&plic>;
- interrupts = <51>;
- clocks = <&tlclk>;
- #address-cells = <1>;
- #size-cells = <0>;
- sifive,fifo-depth = <8>;
- sifive,max-bits-per-word = <8>;
- };
diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
new file mode 100644
index 000000000000..140e4351a19f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-sifive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive SPI controller
+
+maintainers:
+ - Pragnesh Patel <pragnesh.patel@sifive.com>
+ - Paul Walmsley <paul.walmsley@sifive.com>
+ - Palmer Dabbelt <palmer@sifive.com>
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+properties:
+ compatible:
+ items:
+ - const: sifive,fu540-c000-spi
+ - const: sifive,spi0
+
+ description:
+ Should be "sifive,<chip>-spi" and "sifive,spi<version>".
+ Supported compatible strings are -
+ "sifive,fu540-c000-spi" for the SiFive SPI v0 as integrated
+ onto the SiFive FU540 chip, and "sifive,spi0" for the SiFive
+ SPI v0 IP block with no chip integration tweaks.
+ Please refer to sifive-blocks-ip-versioning.txt for details
+
+ SPI RTL that corresponds to the IP block version numbers can be found here -
+ https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi
+
+ reg:
+ maxItems: 1
+
+ description:
+ Physical base address and size of SPI registers map
+ A second (optional) range can indicate memory mapped flash
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ description:
+ Must reference the frequency given to the controller
+
+ sifive,fifo-depth:
+ description:
+ Depth of hardware queues; defaults to 8
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum: [ 8 ]
+ - default: 8
+
+ sifive,max-bits-per-word:
+ description:
+ Maximum bits per word; defaults to 8
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8 ]
+ - default: 8
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ spi: spi@10040000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>;
+ interrupt-parent = <&plic>;
+ interrupts = <51>;
+ clocks = <&tlclk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sifive,fifo-depth = <8>;
+ sifive,max-bits-per-word = <8>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
deleted file mode 100644
index bfc038b9478d..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* STMicroelectronics Quad Serial Peripheral Interface(QSPI)
-
-Required properties:
-- compatible: should be "st,stm32f469-qspi"
-- reg: the first contains the register location and length.
- the second contains the memory mapping address and length
-- reg-names: should contain the reg names "qspi" "qspi_mm"
-- interrupts: should contain the interrupt for the device
-- clocks: the phandle of the clock needed by the QSPI controller
-- A pinctrl must be defined to set pins in mode of operation for QSPI transfer
-
-Optional properties:
-- resets: must contain the phandle to the reset controller.
-
-A spi flash (NOR/NAND) must be a child of spi node and could have some
-properties. Also see jedec,spi-nor.txt.
-
-Required properties:
-- reg: chip-Select number (QSPI controller may connect 2 flashes)
-- spi-max-frequency: max frequency of spi bus
-
-Optional properties:
-- spi-rx-bus-width: see ./spi-bus.txt for the description
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names: DMA request names should include "tx" and "rx" if present.
-
-Example:
-
-qspi: spi@a0001000 {
- compatible = "st,stm32f469-qspi";
- reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- interrupts = <91>;
- resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
- clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi0>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <108000000>;
- ...
- };
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
index dc924a5f71db..5f4ed3e5c994 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
@@ -8,7 +8,8 @@ Required properties:
number.
Optional properties:
-- xlnx,num-ss-bits : Number of chip selects used.
+- xlnx,num-ss-bits : Number of chip selects used.
+- xlnx,num-transfer-bits : Number of bits per transfer. This will be 8 if not specified
Example:
axi_quad_spi@41e00000 {
@@ -17,5 +18,6 @@ Example:
interrupts = <0 31 1>;
reg = <0x41e00000 0x10000>;
xlnx,num-ss-bits = <0x1>;
+ xlnx,num-transfer-bits = <32>;
};
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
new file mode 100644
index 000000000000..3665a5fe6b7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI) bindings
+
+maintainers:
+ - Christophe Kerello <christophe.kerello@st.com>
+ - Patrice Chotard <patrice.chotard@st.com>
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+properties:
+ compatible:
+ const: st,stm32f469-qspi
+
+ reg:
+ items:
+ - description: registers
+ - description: memory mapping
+
+ reg-names:
+ items:
+ - const: qspi
+ - const: qspi_mm
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: tx DMA channel
+ - description: rx DMA channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
+ <&mdma1 22 0x10 0x100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ };
+ };
+
+...
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index 9a6e4923bd69..563440315acd 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -89,7 +89,7 @@ void pxa_ssp_free(struct ssp_device *ssp)
ssp->use_count--;
ssp->label = NULL;
} else
- dev_err(&ssp->pdev->dev, "device already free\n");
+ dev_err(ssp->dev, "device already free\n");
mutex_unlock(&ssp_lock);
}
EXPORT_SYMBOL(pxa_ssp_free);
@@ -118,7 +118,7 @@ static int pxa_ssp_probe(struct platform_device *pdev)
if (ssp == NULL)
return -ENOMEM;
- ssp->pdev = pdev;
+ ssp->dev = dev;
ssp->clk = devm_clk_get(dev, NULL);
if (IS_ERR(ssp->clk))
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 1631c255deab..2cd2cc2316c6 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -39,24 +39,24 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 4,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 6,
.bits_per_word = 8,
@@ -139,16 +139,16 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->read_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 4,
.rx_buf = adis->rx,
@@ -156,8 +156,8 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->read_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.rx_buf = adis->rx + 2,
.bits_per_word = 8,
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 6f7fdcbb9151..870f7797b56b 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -80,6 +80,7 @@ config SPI_ARMADA_3700
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on ARCH_AT91 || COMPILE_TEST
+ depends on OF
help
This selects a driver for the Atmel SPI Controller, present on
many AT91 ARM chips.
@@ -143,7 +144,7 @@ config SPI_BCM63XX
tristate "Broadcom BCM63xx SPI controller"
depends on BCM63XX || COMPILE_TEST
help
- Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
+ Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
config SPI_BCM63XX_HSSPI
tristate "Broadcom BCM63XX HS SPI controller driver"
@@ -234,11 +235,11 @@ config SPI_DLN2
tristate "Diolan DLN-2 USB SPI adapter"
depends on MFD_DLN2
help
- If you say yes to this option, support will be included for Diolan
- DLN2, a USB to SPI interface.
+ If you say yes to this option, support will be included for Diolan
+ DLN2, a USB to SPI interface.
- This driver can also be built as a module. If so, the module
- will be called spi-dln2.
+ This driver can also be built as a module. If so, the module
+ will be called spi-dln2.
config SPI_EFM32
tristate "EFM32 SPI controller"
@@ -747,10 +748,10 @@ config SPI_SYNQUACER
It also supports the new dual-bit and quad-bit SPI protocol.
config SPI_MXIC
- tristate "Macronix MX25F0A SPI controller"
- depends on SPI_MASTER
- help
- This selects the Macronix MX25F0A SPI controller driver.
+ tristate "Macronix MX25F0A SPI controller"
+ depends on SPI_MASTER
+ help
+ This selects the Macronix MX25F0A SPI controller driver.
config SPI_MXS
tristate "Freescale MXS SPI controller"
diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c
index a40bb2ef89dc..88033422a42a 100644
--- a/drivers/spi/spi-at91-usart.c
+++ b/drivers/spi/spi-at91-usart.c
@@ -132,7 +132,7 @@ static int at91_usart_spi_configure_dma(struct spi_controller *ctlr,
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- ctlr->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ ctlr->dma_tx = dma_request_chan(dev, "tx");
if (IS_ERR_OR_NULL(ctlr->dma_tx)) {
if (IS_ERR(ctlr->dma_tx)) {
err = PTR_ERR(ctlr->dma_tx);
@@ -145,7 +145,7 @@ static int at91_usart_spi_configure_dma(struct spi_controller *ctlr,
goto at91_usart_spi_error_clear;
}
- ctlr->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ ctlr->dma_rx = dma_request_chan(dev, "rx");
if (IS_ERR_OR_NULL(ctlr->dma_rx)) {
if (IS_ERR(ctlr->dma_rx)) {
err = PTR_ERR(ctlr->dma_rx);
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index acf318e7330c..56f0ca361deb 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -222,37 +222,13 @@
| SPI_BF(name, value))
/* Register access macros */
-#ifdef CONFIG_AVR32
-#define spi_readl(port, reg) \
- __raw_readl((port)->regs + SPI_##reg)
-#define spi_writel(port, reg, value) \
- __raw_writel((value), (port)->regs + SPI_##reg)
-
-#define spi_readw(port, reg) \
- __raw_readw((port)->regs + SPI_##reg)
-#define spi_writew(port, reg, value) \
- __raw_writew((value), (port)->regs + SPI_##reg)
-
-#define spi_readb(port, reg) \
- __raw_readb((port)->regs + SPI_##reg)
-#define spi_writeb(port, reg, value) \
- __raw_writeb((value), (port)->regs + SPI_##reg)
-#else
#define spi_readl(port, reg) \
readl_relaxed((port)->regs + SPI_##reg)
#define spi_writel(port, reg, value) \
writel_relaxed((value), (port)->regs + SPI_##reg)
-
-#define spi_readw(port, reg) \
- readw_relaxed((port)->regs + SPI_##reg)
#define spi_writew(port, reg, value) \
writew_relaxed((value), (port)->regs + SPI_##reg)
-#define spi_readb(port, reg) \
- readb_relaxed((port)->regs + SPI_##reg)
-#define spi_writeb(port, reg, value) \
- writeb_relaxed((value), (port)->regs + SPI_##reg)
-#endif
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
* cache operations; better heuristics consider wordsize and bitrate.
*/
@@ -299,17 +275,16 @@ struct atmel_spi {
bool use_dma;
bool use_pdc;
- bool use_cs_gpios;
bool keep_cs;
- bool cs_active;
u32 fifo_size;
+ u8 native_cs_free;
+ u8 native_cs_for_gpio;
};
/* Controller-specific per-slave state */
struct atmel_spi_device {
- struct gpio_desc *npcs_pin;
u32 csr;
};
@@ -336,11 +311,9 @@ static bool atmel_spi_is_v2(struct atmel_spi *as)
* transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer
* controllers have CSAAT and friends.
*
- * Since the CSAAT functionality is a bit weird on newer controllers as
- * well, we use GPIO to control nCSx pins on all controllers, updating
- * MR.PCS to avoid confusing the controller. Using GPIOs also lets us
- * support active-high chipselects despite the controller's belief that
- * only active-low devices/systems exists.
+ * Even controller newer than ar91rm9200, using GPIOs can make sens as
+ * it lets us support active-high chipselects despite the controller's
+ * belief that only active-low devices/systems exists.
*
* However, at91rm9200 has a second erratum whereby nCS0 doesn't work
* right when driven with GPIO. ("Mode Fault does not allow more than one
@@ -352,30 +325,36 @@ static bool atmel_spi_is_v2(struct atmel_spi *as)
static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
{
struct atmel_spi_device *asd = spi->controller_state;
+ int chip_select;
u32 mr;
+ if (spi->cs_gpiod)
+ chip_select = as->native_cs_for_gpio;
+ else
+ chip_select = spi->chip_select;
+
if (atmel_spi_is_v2(as)) {
- spi_writel(as, CSR0 + 4 * spi->chip_select, asd->csr);
+ spi_writel(as, CSR0 + 4 * chip_select, asd->csr);
/* For the low SPI version, there is a issue that PDC transfer
* on CS1,2,3 needs SPI_CSR0.BITS config as SPI_CSR1,2,3.BITS
*/
spi_writel(as, CSR0, asd->csr);
if (as->caps.has_wdrbt) {
spi_writel(as, MR,
- SPI_BF(PCS, ~(0x01 << spi->chip_select))
+ SPI_BF(PCS, ~(0x01 << chip_select))
| SPI_BIT(WDRBT)
| SPI_BIT(MODFDIS)
| SPI_BIT(MSTR));
} else {
spi_writel(as, MR,
- SPI_BF(PCS, ~(0x01 << spi->chip_select))
+ SPI_BF(PCS, ~(0x01 << chip_select))
| SPI_BIT(MODFDIS)
| SPI_BIT(MSTR));
}
mr = spi_readl(as, MR);
- if (as->use_cs_gpios)
- gpiod_set_value(asd->npcs_pin, 1);
+ if (spi->cs_gpiod)
+ gpiod_set_value(spi->cs_gpiod, 1);
} else {
u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
int i;
@@ -390,9 +369,9 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
}
mr = spi_readl(as, MR);
- mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
- if (as->use_cs_gpios && spi->chip_select != 0)
- gpiod_set_value(asd->npcs_pin, 1);
+ mr = SPI_BFINS(PCS, ~(1 << chip_select), mr);
+ if (spi->cs_gpiod)
+ gpiod_set_value(spi->cs_gpiod, 1);
spi_writel(as, MR, mr);
}
@@ -401,24 +380,29 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
{
- struct atmel_spi_device *asd = spi->controller_state;
+ int chip_select;
u32 mr;
+ if (spi->cs_gpiod)
+ chip_select = as->native_cs_for_gpio;
+ else
+ chip_select = spi->chip_select;
+
/* only deactivate *this* device; sometimes transfers to
* another device may be active when this routine is called.
*/
mr = spi_readl(as, MR);
- if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
+ if (~SPI_BFEXT(PCS, mr) & (1 << chip_select)) {
mr = SPI_BFINS(PCS, 0xf, mr);
spi_writel(as, MR, mr);
}
dev_dbg(&spi->dev, "DEactivate NPCS, mr %08x\n", mr);
- if (!as->use_cs_gpios)
+ if (!spi->cs_gpiod)
spi_writel(as, CR, SPI_BIT(LASTXFER));
- else if (atmel_spi_is_v2(as) || spi->chip_select != 0)
- gpiod_set_value(asd->npcs_pin, 0);
+ else
+ gpiod_set_value(spi->cs_gpiod, 0);
}
static void atmel_spi_lock(struct atmel_spi *as) __acquires(&as->lock)
@@ -527,7 +511,7 @@ static int atmel_spi_configure_dma(struct spi_master *master,
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ master->dma_tx = dma_request_chan(dev, "tx");
if (IS_ERR(master->dma_tx)) {
err = PTR_ERR(master->dma_tx);
if (err == -EPROBE_DEFER) {
@@ -844,6 +828,12 @@ static int atmel_spi_set_xfer_speed(struct atmel_spi *as,
{
u32 scbr, csr;
unsigned long bus_hz;
+ int chip_select;
+
+ if (spi->cs_gpiod)
+ chip_select = as->native_cs_for_gpio;
+ else
+ chip_select = spi->chip_select;
/* v1 chips start out at half the peripheral bus speed. */
bus_hz = as->spi_clk;
@@ -872,9 +862,9 @@ static int atmel_spi_set_xfer_speed(struct atmel_spi *as,
xfer->speed_hz, scbr, bus_hz);
return -EINVAL;
}
- csr = spi_readl(as, CSR0 + 4 * spi->chip_select);
+ csr = spi_readl(as, CSR0 + 4 * chip_select);
csr = SPI_BFINS(SCBR, scbr, csr);
- spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
+ spi_writel(as, CSR0 + 4 * chip_select, csr);
return 0;
}
@@ -1173,40 +1163,105 @@ atmel_spi_pdc_interrupt(int irq, void *dev_id)
return ret;
}
+static int atmel_word_delay_csr(struct spi_device *spi, struct atmel_spi *as)
+{
+ struct spi_delay *delay = &spi->word_delay;
+ u32 value = delay->value;
+
+ switch (delay->unit) {
+ case SPI_DELAY_UNIT_NSECS:
+ value /= 1000;
+ break;
+ case SPI_DELAY_UNIT_USECS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return (as->spi_clk / 1000000 * value) >> 5;
+}
+
+static void initialize_native_cs_for_gpio(struct atmel_spi *as)
+{
+ int i;
+ struct spi_master *master = platform_get_drvdata(as->pdev);
+
+ if (!as->native_cs_free)
+ return; /* already initialized */
+
+ if (!master->cs_gpiods)
+ return; /* No CS GPIO */
+
+ /*
+ * On the first version of the controller (AT91RM9200), CS0
+ * can't be used associated with GPIO
+ */
+ if (atmel_spi_is_v2(as))
+ i = 0;
+ else
+ i = 1;
+
+ for (; i < 4; i++)
+ if (master->cs_gpiods[i])
+ as->native_cs_free |= BIT(i);
+
+ if (as->native_cs_free)
+ as->native_cs_for_gpio = ffs(as->native_cs_free);
+}
+
static int atmel_spi_setup(struct spi_device *spi)
{
struct atmel_spi *as;
struct atmel_spi_device *asd;
u32 csr;
unsigned int bits = spi->bits_per_word;
+ int chip_select;
+ int word_delay_csr;
as = spi_master_get_devdata(spi->master);
/* see notes above re chipselect */
- if (!atmel_spi_is_v2(as)
- && spi->chip_select == 0
- && (spi->mode & SPI_CS_HIGH)) {
- dev_dbg(&spi->dev, "setup: can't be active-high\n");
+ if (!spi->cs_gpiod && (spi->mode & SPI_CS_HIGH)) {
+ dev_warn(&spi->dev, "setup: non GPIO CS can't be active-high\n");
return -EINVAL;
}
+ /* Setup() is called during spi_register_controller(aka
+ * spi_register_master) but after all membmers of the cs_gpiod
+ * array have been filled, so we can looked for which native
+ * CS will be free for using with GPIO
+ */
+ initialize_native_cs_for_gpio(as);
+
+ if (spi->cs_gpiod && as->native_cs_free) {
+ dev_err(&spi->dev,
+ "No native CS available to support this GPIO CS\n");
+ return -EBUSY;
+ }
+
+ if (spi->cs_gpiod)
+ chip_select = as->native_cs_for_gpio;
+ else
+ chip_select = spi->chip_select;
+
csr = SPI_BF(BITS, bits - 8);
if (spi->mode & SPI_CPOL)
csr |= SPI_BIT(CPOL);
if (!(spi->mode & SPI_CPHA))
csr |= SPI_BIT(NCPHA);
- if (!as->use_cs_gpios)
- csr |= SPI_BIT(CSAAT);
- /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
- */
+ if (!spi->cs_gpiod)
+ csr |= SPI_BIT(CSAAT);
csr |= SPI_BF(DLYBS, 0);
+ word_delay_csr = atmel_word_delay_csr(spi, as);
+ if (word_delay_csr < 0)
+ return word_delay_csr;
+
/* DLYBCT adds delays between words. This is useful for slow devices
* that need a bit of time to setup the next transfer.
*/
- csr |= SPI_BF(DLYBCT,
- (as->spi_clk / 1000000 * spi->word_delay_usecs) >> 5);
+ csr |= SPI_BF(DLYBCT, word_delay_csr);
asd = spi->controller_state;
if (!asd) {
@@ -1214,21 +1269,6 @@ static int atmel_spi_setup(struct spi_device *spi)
if (!asd)
return -ENOMEM;
- /*
- * If use_cs_gpios is true this means that we have "cs-gpios"
- * defined in the device tree node so we should have
- * gotten the GPIO lines from the device tree inside the
- * SPI core. Warn if this is not the case but continue since
- * CS GPIOs are after all optional.
- */
- if (as->use_cs_gpios) {
- if (!spi->cs_gpiod) {
- dev_err(&spi->dev,
- "host claims to use CS GPIOs but no CS found in DT by the SPI core\n");
- }
- asd->npcs_pin = spi->cs_gpiod;
- }
-
spi->controller_state = asd;
}
@@ -1239,7 +1279,7 @@ static int atmel_spi_setup(struct spi_device *spi)
bits, spi->mode, spi->chip_select, csr);
if (!atmel_spi_is_v2(as))
- spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
+ spi_writel(as, CSR0 + 4 * chip_select, csr);
return 0;
}
@@ -1368,19 +1408,16 @@ static int atmel_spi_one_transfer(struct spi_master *master,
&& as->use_pdc)
atmel_spi_dma_unmap_xfer(master, xfer);
- if (xfer->delay_usecs)
- udelay(xfer->delay_usecs);
+ spi_transfer_delay_exec(xfer);
if (xfer->cs_change) {
if (list_is_last(&xfer->transfer_list,
&msg->transfers)) {
as->keep_cs = true;
} else {
- as->cs_active = !as->cs_active;
- if (as->cs_active)
- cs_activate(as, msg->spi);
- else
- cs_deactivate(as, msg->spi);
+ cs_deactivate(as, msg->spi);
+ udelay(10);
+ cs_activate(as, msg->spi);
}
}
@@ -1403,7 +1440,6 @@ static int atmel_spi_transfer_one_message(struct spi_master *master,
atmel_spi_lock(as);
cs_activate(as, spi);
- as->cs_active = true;
as->keep_cs = false;
msg->status = 0;
@@ -1527,7 +1563,7 @@ static int atmel_spi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 16);
master->dev.of_node = pdev->dev.of_node;
master->bus_num = pdev->id;
- master->num_chipselect = master->dev.of_node ? 0 : 4;
+ master->num_chipselect = 4;
master->setup = atmel_spi_setup;
master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX);
master->transfer_one_message = atmel_spi_transfer_one_message;
@@ -1555,19 +1591,6 @@ static int atmel_spi_probe(struct platform_device *pdev)
atmel_get_caps(as);
- /*
- * If there are chip selects in the device tree, those will be
- * discovered by the SPI core when registering the SPI master
- * and assigned to each SPI device.
- */
- as->use_cs_gpios = true;
- if (atmel_spi_is_v2(as) &&
- pdev->dev.of_node &&
- !of_get_property(pdev->dev.of_node, "cs-gpios", NULL)) {
- as->use_cs_gpios = false;
- master->num_chipselect = 4;
- }
-
as->use_dma = false;
as->use_pdc = false;
if (as->caps.has_dma_support) {
@@ -1775,20 +1798,18 @@ static const struct dev_pm_ops atmel_spi_pm_ops = {
#define ATMEL_SPI_PM_OPS NULL
#endif
-#if defined(CONFIG_OF)
static const struct of_device_id atmel_spi_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-spi" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_spi_dt_ids);
-#endif
static struct platform_driver atmel_spi_driver = {
.driver = {
.name = "atmel_spi",
.pm = ATMEL_SPI_PM_OPS,
- .of_match_table = of_match_ptr(atmel_spi_dt_ids),
+ .of_match_table = atmel_spi_dt_ids,
},
.probe = atmel_spi_probe,
.remove = atmel_spi_remove,
diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
index 74842f6019ed..eb9b78a90dcf 100644
--- a/drivers/spi/spi-axi-spi-engine.c
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -163,10 +163,21 @@ static void spi_engine_gen_xfer(struct spi_engine_program *p, bool dry,
}
static void spi_engine_gen_sleep(struct spi_engine_program *p, bool dry,
- struct spi_engine *spi_engine, unsigned int clk_div, unsigned int delay)
+ struct spi_engine *spi_engine, unsigned int clk_div,
+ struct spi_transfer *xfer)
{
unsigned int spi_clk = clk_get_rate(spi_engine->ref_clk);
unsigned int t;
+ int delay;
+
+ if (xfer->delay_usecs) {
+ delay = xfer->delay_usecs;
+ } else {
+ delay = spi_delay_to_ns(&xfer->delay, xfer);
+ if (delay < 0)
+ return;
+ delay /= 1000;
+ }
if (delay == 0)
return;
@@ -218,8 +229,7 @@ static int spi_engine_compile_message(struct spi_engine *spi_engine,
spi_engine_gen_cs(p, dry, spi, true);
spi_engine_gen_xfer(p, dry, xfer);
- spi_engine_gen_sleep(p, dry, spi_engine, clk_div,
- xfer->delay_usecs);
+ spi_engine_gen_sleep(p, dry, spi_engine, clk_div, xfer);
cs_change = xfer->cs_change;
if (list_is_last(&xfer->transfer_list, &msg->transfers))
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 7a3531856491..85bad70f59e3 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -803,7 +803,8 @@ static int bcm_qspi_bspi_exec_mem_op(struct spi_device *spi,
return -EIO;
from = op->addr.val;
- bcm_qspi_chip_select(qspi, spi->chip_select);
+ if (!spi->cs_gpiod)
+ bcm_qspi_chip_select(qspi, spi->chip_select);
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
/*
@@ -882,7 +883,8 @@ static int bcm_qspi_transfer_one(struct spi_master *master,
int slots;
unsigned long timeo = msecs_to_jiffies(100);
- bcm_qspi_chip_select(qspi, spi->chip_select);
+ if (!spi->cs_gpiod)
+ bcm_qspi_chip_select(qspi, spi->chip_select);
qspi->trans_pos.trans = trans;
qspi->trans_pos.byte = 0;
@@ -1234,6 +1236,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
master->cleanup = bcm_qspi_cleanup;
master->dev.of_node = dev->of_node;
master->num_chipselect = NUM_CHIPSELECT;
+ master->use_gpio_descriptors = true;
qspi->big_endian = of_device_is_big_endian(dev->of_node);
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index b4070c0de3df..fb61a620effc 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -1248,7 +1248,7 @@ static int bcm2835_spi_setup(struct spi_device *spi)
/*
* Retrieve the corresponding GPIO line used for CS.
* The inversion semantics will be handled by the GPIO core
- * code, so we pass GPIOS_OUT_LOW for "unasserted" and
+ * code, so we pass GPIOD_OUT_LOW for "unasserted" and
* the correct flag for inversion semantics. The SPI_CS_HIGH
* on spi->mode cannot be checked for polarity in this case
* as the flag use_gpio_descriptors enforces SPI_CS_HIGH.
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index c6836a931dbf..7327309ea3d5 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -291,8 +291,7 @@ static int bcm63xx_hsspi_transfer_one(struct spi_master *master,
msg->actual_length += t->len;
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ spi_transfer_delay_exec(t);
if (t->cs_change)
bcm63xx_hsspi_set_cs(bs, spi->chip_select, false);
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index fdd7eaa0b8ed..0f1b10a4ef0c 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -368,7 +368,7 @@ static int bcm63xx_spi_transfer_one(struct spi_master *master,
}
/* CS will be deasserted directly after transfer */
- if (t->delay_usecs) {
+ if (t->delay_usecs || t->delay.value) {
dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
status = -EINVAL;
goto exit;
diff --git a/drivers/spi/spi-cavium.c b/drivers/spi/spi-cavium.c
index 5aaf21582cb5..6854c3ce423b 100644
--- a/drivers/spi/spi-cavium.c
+++ b/drivers/spi/spi-cavium.c
@@ -119,8 +119,7 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
*rx_buf++ = (u8)v;
}
- if (xfer->delay_usecs)
- udelay(xfer->delay_usecs);
+ spi_transfer_delay_exec(xfer);
return xfer->len;
}
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index bd46fca3f094..384a3ab6dc2d 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -9,6 +9,7 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/scatterlist.h>
@@ -193,6 +194,8 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
goto out;
}
+ pm_runtime_enable(&pdev->dev);
+
ret = dw_spi_add_host(&pdev->dev, dws);
if (ret)
goto out;
@@ -201,6 +204,7 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
return 0;
out:
+ pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(dwsmmio->pclk);
out_clk:
clk_disable_unprepare(dwsmmio->clk);
@@ -212,6 +216,7 @@ static int dw_spi_mmio_remove(struct platform_device *pdev)
struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
dw_spi_remove_host(&dwsmmio->dws);
+ pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(dwsmmio->pclk);
clk_disable_unprepare(dwsmmio->clk);
@@ -223,6 +228,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init},
{ .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
{ .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
+ { .compatible = "renesas,rzn1-spi", },
{ /* end of table */}
};
MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
index 140644913e6c..12c131b5fb4e 100644
--- a/drivers/spi/spi-dw-pci.c
+++ b/drivers/spi/spi-dw-pci.c
@@ -7,6 +7,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
@@ -35,7 +36,7 @@ static struct spi_pci_desc spi_pci_mid_desc_2 = {
};
static struct spi_pci_desc spi_pci_ehl_desc = {
- .num_cs = 1,
+ .num_cs = 2,
.bus_num = -1,
.max_freq = 100000000,
};
@@ -57,13 +58,18 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Get basic io resource and map it */
dws->paddr = pci_resource_start(pdev, pci_bar);
+ pci_set_master(pdev);
ret = pcim_iomap_regions(pdev, 1 << pci_bar, pci_name(pdev));
if (ret)
return ret;
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0)
+ return ret;
+
dws->regs = pcim_iomap_table(pdev)[pci_bar];
- dws->irq = pdev->irq;
+ dws->irq = pci_irq_vector(pdev, 0);
/*
* Specific handling for platforms, like dma setup,
@@ -80,12 +86,15 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return ret;
}
} else {
+ pci_free_irq_vectors(pdev);
return -ENODEV;
}
ret = dw_spi_add_host(&pdev->dev, dws);
- if (ret)
+ if (ret) {
+ pci_free_irq_vectors(pdev);
return ret;
+ }
/* PCI hook and SPI hook use the same drv data */
pci_set_drvdata(pdev, dws);
@@ -93,6 +102,11 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n",
pdev->vendor, pdev->device);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+ pm_runtime_allow(&pdev->dev);
+
return 0;
}
@@ -100,7 +114,11 @@ static void spi_pci_remove(struct pci_dev *pdev)
{
struct dw_spi *dws = pci_get_drvdata(pdev);
+ pm_runtime_forbid(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+
dw_spi_remove_host(dws);
+ pci_free_irq_vectors(pdev);
}
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 9a49e073e8b7..a92aa5cd4fbe 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -308,7 +308,8 @@ static int dw_spi_transfer_one(struct spi_controller *master,
cr0 = (transfer->bits_per_word - 1)
| (chip->type << SPI_FRF_OFFSET)
| ((((spi->mode & SPI_CPOL) ? 1 : 0) << SPI_SCOL_OFFSET) |
- (((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET))
+ (((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET) |
+ (((spi->mode & SPI_LOOP) ? 1 : 0) << SPI_SRL_OFFSET))
| (chip->tmode << SPI_TMOD_OFFSET);
/*
@@ -493,6 +494,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
master->dev.of_node = dev->of_node;
master->dev.fwnode = dev->fwnode;
master->flags = SPI_MASTER_GPIO_SS;
+ master->auto_runtime_pm = true;
if (dws->set_cs)
master->set_cs = dws->set_cs;
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index c9c15881e982..38c7de1f0aa9 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -4,7 +4,6 @@
#include <linux/io.h>
#include <linux/scatterlist.h>
-#include <linux/gpio.h>
/* Register offsets */
#define DW_SPI_CTRL0 0x00
diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c
index 00f46c816a56..d3336a63f462 100644
--- a/drivers/spi/spi-falcon.c
+++ b/drivers/spi/spi-falcon.c
@@ -377,7 +377,7 @@ static int falcon_sflash_xfer_one(struct spi_master *master,
m->actual_length += t->len;
- WARN_ON(t->delay_usecs || t->cs_change);
+ WARN_ON(t->delay_usecs || t->delay.value || t->cs_change);
spi_flags = 0;
}
diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c
index 858f0544289e..54ad0ac121e5 100644
--- a/drivers/spi/spi-fsl-cpm.c
+++ b/drivers/spi/spi-fsl-cpm.c
@@ -392,7 +392,8 @@ void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi)
dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE);
dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE);
cpm_muram_free(cpm_muram_offset(mspi->tx_bd));
- cpm_muram_free(cpm_muram_offset(mspi->pram));
+ if (!(mspi->flags & SPI_CPM1))
+ cpm_muram_free(cpm_muram_offset(mspi->pram));
fsl_spi_free_dummy_rx();
}
EXPORT_SYMBOL_GPL(fsl_spi_cpm_free);
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index bec758e978fb..442cff71a0d2 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -129,6 +129,7 @@ enum dspi_trans_mode {
struct fsl_dspi_devtype_data {
enum dspi_trans_mode trans_mode;
u8 max_clock_factor;
+ bool ptp_sts_supported;
bool xspi_mode;
};
@@ -140,12 +141,14 @@ static const struct fsl_dspi_devtype_data vf610_data = {
static const struct fsl_dspi_devtype_data ls1021a_v1_data = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
+ .ptp_sts_supported = true,
.xspi_mode = true,
};
static const struct fsl_dspi_devtype_data ls2085a_data = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
+ .ptp_sts_supported = true,
};
static const struct fsl_dspi_devtype_data coldfire_data = {
@@ -654,6 +657,9 @@ static int dspi_rxtx(struct fsl_dspi *dspi)
u16 spi_tcnt;
u32 spi_tcr;
+ spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer,
+ dspi->tx - dspi->bytes_per_word, !dspi->irq);
+
/* Get transfer counter (in number of SPI transfers). It was
* reset to 0 when transfer(s) were started.
*/
@@ -672,6 +678,9 @@ static int dspi_rxtx(struct fsl_dspi *dspi)
/* Success! */
return 0;
+ spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
+ dspi->tx, !dspi->irq);
+
if (trans_mode == DSPI_EOQ_MODE)
dspi_eoq_write(dspi);
else if (trans_mode == DSPI_TCFQ_MODE)
@@ -707,7 +716,7 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id)
regmap_read(dspi->regmap, SPI_SR, &spi_sr);
regmap_write(dspi->regmap, SPI_SR, spi_sr);
- if (!(spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF)))
+ if (!(spi_sr & SPI_SR_EOQF))
return IRQ_NONE;
if (dspi_rxtx(dspi) == 0) {
@@ -779,6 +788,9 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
SPI_FRAME_EBITS(transfer->bits_per_word) |
SPI_CTARE_DTCP(1));
+ spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
+ dspi->tx, !dspi->irq);
+
trans_mode = dspi->devtype_data->trans_mode;
switch (trans_mode) {
case DSPI_EOQ_MODE:
@@ -815,8 +827,7 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
dev_err(&dspi->pdev->dev,
"Waiting for transfer to complete failed!\n");
- if (transfer->delay_usecs)
- udelay(transfer->delay_usecs);
+ spi_transfer_delay_exec(transfer);
}
out:
@@ -1006,6 +1017,25 @@ static void dspi_init(struct fsl_dspi *dspi)
SPI_CTARE_FMSZE(0) | SPI_CTARE_DTCP(1));
}
+static int dspi_slave_abort(struct spi_master *master)
+{
+ struct fsl_dspi *dspi = spi_master_get_devdata(master);
+
+ /*
+ * Terminate all pending DMA transactions for the SPI working
+ * in SLAVE mode.
+ */
+ dmaengine_terminate_sync(dspi->dma->chan_rx);
+ dmaengine_terminate_sync(dspi->dma->chan_tx);
+
+ /* Clear the internal DSPI RX and TX FIFO buffers */
+ regmap_update_bits(dspi->regmap, SPI_MCR,
+ SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF,
+ SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF);
+
+ return 0;
+}
+
static int dspi_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -1030,6 +1060,7 @@ static int dspi_probe(struct platform_device *pdev)
ctlr->dev.of_node = pdev->dev.of_node;
ctlr->cleanup = dspi_cleanup;
+ ctlr->slave_abort = dspi_slave_abort;
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
pdata = dev_get_platdata(&pdev->dev);
@@ -1114,6 +1145,9 @@ static int dspi_probe(struct platform_device *pdev)
dspi_init(dspi);
+ if (dspi->devtype_data->trans_mode == DSPI_TCFQ_MODE)
+ goto poll_mode;
+
dspi->irq = platform_get_irq(pdev, 0);
if (dspi->irq <= 0) {
dev_info(&pdev->dev,
@@ -1132,6 +1166,7 @@ static int dspi_probe(struct platform_device *pdev)
init_waitqueue_head(&dspi->waitq);
poll_mode:
+
if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
ret = dspi_request_dma(dspi, res->start);
if (ret < 0) {
@@ -1143,6 +1178,8 @@ poll_mode:
ctlr->max_speed_hz =
clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
+ ctlr->ptp_sts_supported = dspi->devtype_data->ptp_sts_supported;
+
platform_set_drvdata(pdev, ctlr);
ret = spi_register_controller(ctlr);
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index f20326714b9d..e60581283a24 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -427,8 +427,7 @@ static int fsl_espi_trans(struct spi_message *m, struct spi_transfer *trans)
ret = fsl_espi_bufs(spi, trans);
- if (trans->delay_usecs)
- udelay(trans->delay_usecs);
+ spi_transfer_delay_exec(trans);
return ret;
}
@@ -437,6 +436,7 @@ static int fsl_espi_do_one_msg(struct spi_master *master,
struct spi_message *m)
{
unsigned int delay_usecs = 0, rx_nbits = 0;
+ unsigned int delay_nsecs = 0, delay_nsecs1 = 0;
struct spi_transfer *t, trans = {};
int ret;
@@ -445,8 +445,16 @@ static int fsl_espi_do_one_msg(struct spi_master *master,
goto out;
list_for_each_entry(t, &m->transfers, transfer_list) {
- if (t->delay_usecs > delay_usecs)
- delay_usecs = t->delay_usecs;
+ if (t->delay_usecs) {
+ if (t->delay_usecs > delay_usecs) {
+ delay_usecs = t->delay_usecs;
+ delay_nsecs = delay_usecs * 1000;
+ }
+ } else {
+ delay_nsecs1 = spi_delay_to_ns(&t->delay, t);
+ if (delay_nsecs1 > delay_nsecs)
+ delay_nsecs = delay_nsecs1;
+ }
if (t->rx_nbits > rx_nbits)
rx_nbits = t->rx_nbits;
}
@@ -457,7 +465,8 @@ static int fsl_espi_do_one_msg(struct spi_master *master,
trans.len = m->frame_length;
trans.speed_hz = t->speed_hz;
trans.bits_per_word = t->bits_per_word;
- trans.delay_usecs = delay_usecs;
+ trans.delay.value = delay_nsecs;
+ trans.delay.unit = SPI_DELAY_UNIT_NSECS;
trans.rx_nbits = rx_nbits;
if (trans.len)
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index d08e9324140e..2cc0ddb4a988 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -675,7 +675,7 @@ static int fsl_lpspi_dma_init(struct device *dev,
int ret;
/* Prepare for TX DMA: */
- controller->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ controller->dma_tx = dma_request_chan(dev, "tx");
if (IS_ERR(controller->dma_tx)) {
ret = PTR_ERR(controller->dma_tx);
dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
@@ -684,7 +684,7 @@ static int fsl_lpspi_dma_init(struct device *dev,
}
/* Prepare for RX DMA: */
- controller->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ controller->dma_rx = dma_request_chan(dev, "rx");
if (IS_ERR(controller->dma_rx)) {
ret = PTR_ERR(controller->dma_rx);
dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
@@ -779,7 +779,7 @@ static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id)
if (temp_SR & SR_FCF && (temp_IER & IER_FCIE)) {
writel(SR_FCF, fsl_lpspi->base + IMX7ULP_SR);
- complete(&fsl_lpspi->xfer_done);
+ complete(&fsl_lpspi->xfer_done);
return IRQ_HANDLED;
}
@@ -938,7 +938,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
ret = pm_runtime_get_sync(fsl_lpspi->dev);
if (ret < 0) {
dev_err(fsl_lpspi->dev, "failed to enable clock\n");
- return ret;
+ goto out_controller_put;
}
temp = readl(fsl_lpspi->base + IMX7ULP_PARAM);
diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c
index c02e24c01136..79b1558b74b8 100644
--- a/drivers/spi/spi-fsl-qspi.c
+++ b/drivers/spi/spi-fsl-qspi.c
@@ -63,6 +63,16 @@
#define QUADSPI_IPCR 0x08
#define QUADSPI_IPCR_SEQID(x) ((x) << 24)
+#define QUADSPI_FLSHCR 0x0c
+#define QUADSPI_FLSHCR_TCSS_MASK GENMASK(3, 0)
+#define QUADSPI_FLSHCR_TCSH_MASK GENMASK(11, 8)
+#define QUADSPI_FLSHCR_TDH_MASK GENMASK(17, 16)
+
+#define QUADSPI_BUF0CR 0x10
+#define QUADSPI_BUF1CR 0x14
+#define QUADSPI_BUF2CR 0x18
+#define QUADSPI_BUFXCR_INVALID_MSTRID 0xe
+
#define QUADSPI_BUF3CR 0x1c
#define QUADSPI_BUF3CR_ALLMST_MASK BIT(31)
#define QUADSPI_BUF3CR_ADATSZ(x) ((x) << 8)
@@ -95,6 +105,9 @@
#define QUADSPI_FR 0x160
#define QUADSPI_FR_TFF_MASK BIT(0)
+#define QUADSPI_RSER 0x164
+#define QUADSPI_RSER_TFIE BIT(0)
+
#define QUADSPI_SPTRCLR 0x16c
#define QUADSPI_SPTRCLR_IPPTRC BIT(8)
#define QUADSPI_SPTRCLR_BFPTRC BIT(0)
@@ -112,9 +125,6 @@
#define QUADSPI_LCKER_LOCK BIT(0)
#define QUADSPI_LCKER_UNLOCK BIT(1)
-#define QUADSPI_RSER 0x164
-#define QUADSPI_RSER_TFIE BIT(0)
-
#define QUADSPI_LUT_BASE 0x310
#define QUADSPI_LUT_OFFSET (SEQID_LUT * 4 * 4)
#define QUADSPI_LUT_REG(idx) \
@@ -181,9 +191,16 @@
*/
#define QUADSPI_QUIRK_BASE_INTERNAL BIT(4)
+/*
+ * Controller uses TDH bits in register QUADSPI_FLSHCR.
+ * They need to be set in accordance with the DDR/SDR mode.
+ */
+#define QUADSPI_QUIRK_USE_TDH_SETTING BIT(5)
+
struct fsl_qspi_devtype_data {
unsigned int rxfifo;
unsigned int txfifo;
+ int invalid_mstrid;
unsigned int ahb_buf_size;
unsigned int quirks;
bool little_endian;
@@ -192,6 +209,7 @@ struct fsl_qspi_devtype_data {
static const struct fsl_qspi_devtype_data vybrid_data = {
.rxfifo = SZ_128,
.txfifo = SZ_64,
+ .invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
.ahb_buf_size = SZ_1K,
.quirks = QUADSPI_QUIRK_SWAP_ENDIAN,
.little_endian = true,
@@ -200,6 +218,7 @@ static const struct fsl_qspi_devtype_data vybrid_data = {
static const struct fsl_qspi_devtype_data imx6sx_data = {
.rxfifo = SZ_128,
.txfifo = SZ_512,
+ .invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
.ahb_buf_size = SZ_1K,
.quirks = QUADSPI_QUIRK_4X_INT_CLK | QUADSPI_QUIRK_TKT245618,
.little_endian = true,
@@ -208,22 +227,27 @@ static const struct fsl_qspi_devtype_data imx6sx_data = {
static const struct fsl_qspi_devtype_data imx7d_data = {
.rxfifo = SZ_128,
.txfifo = SZ_512,
+ .invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
.ahb_buf_size = SZ_1K,
- .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK,
+ .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK |
+ QUADSPI_QUIRK_USE_TDH_SETTING,
.little_endian = true,
};
static const struct fsl_qspi_devtype_data imx6ul_data = {
.rxfifo = SZ_128,
.txfifo = SZ_512,
+ .invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
.ahb_buf_size = SZ_1K,
- .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK,
+ .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK |
+ QUADSPI_QUIRK_USE_TDH_SETTING,
.little_endian = true,
};
static const struct fsl_qspi_devtype_data ls1021a_data = {
.rxfifo = SZ_128,
.txfifo = SZ_64,
+ .invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
.ahb_buf_size = SZ_1K,
.quirks = 0,
.little_endian = false,
@@ -233,6 +257,7 @@ static const struct fsl_qspi_devtype_data ls2080a_data = {
.rxfifo = SZ_128,
.txfifo = SZ_64,
.ahb_buf_size = SZ_1K,
+ .invalid_mstrid = 0x0,
.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_BASE_INTERNAL,
.little_endian = true,
};
@@ -275,6 +300,11 @@ static inline int needs_amba_base_offset(struct fsl_qspi *q)
return !(q->devtype_data->quirks & QUADSPI_QUIRK_BASE_INTERNAL);
}
+static inline int needs_tdh_setting(struct fsl_qspi *q)
+{
+ return q->devtype_data->quirks & QUADSPI_QUIRK_USE_TDH_SETTING;
+}
+
/*
* An IC bug makes it necessary to rearrange the 32-bit data.
* Later chips, such as IMX6SLX, have fixed this bug.
@@ -615,6 +645,7 @@ static int fsl_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
void __iomem *base = q->iobase;
u32 addr_offset = 0;
int err = 0;
+ int invalid_mstrid = q->devtype_data->invalid_mstrid;
mutex_lock(&q->lock);
@@ -638,6 +669,10 @@ static int fsl_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
qspi_writel(q, QUADSPI_SPTRCLR_BFPTRC | QUADSPI_SPTRCLR_IPPTRC,
base + QUADSPI_SPTRCLR);
+ qspi_writel(q, invalid_mstrid, base + QUADSPI_BUF0CR);
+ qspi_writel(q, invalid_mstrid, base + QUADSPI_BUF1CR);
+ qspi_writel(q, invalid_mstrid, base + QUADSPI_BUF2CR);
+
fsl_qspi_prepare_lut(q, op);
/*
@@ -710,6 +745,16 @@ static int fsl_qspi_default_setup(struct fsl_qspi *q)
qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
base + QUADSPI_MCR);
+ /*
+ * Previous boot stages (BootROM, bootloader) might have used DDR
+ * mode and did not clear the TDH bits. As we currently use SDR mode
+ * only, clear the TDH bits if necessary.
+ */
+ if (needs_tdh_setting(q))
+ qspi_writel(q, qspi_readl(q, base + QUADSPI_FLSHCR) &
+ ~QUADSPI_FLSHCR_TDH_MASK,
+ base + QUADSPI_FLSHCR);
+
reg = qspi_readl(q, base + QUADSPI_SMPR);
qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK
| QUADSPI_SMPR_FSPHS_MASK
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 4b80ace1d137..114801a32371 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -416,8 +416,7 @@ static int fsl_spi_do_one_msg(struct spi_master *master,
}
m->actual_length += t->len;
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ spi_transfer_delay_exec(t);
if (cs_change) {
ndelay(nsecs);
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 1d3e23ec20a6..7ceb0ba27b75 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -362,19 +362,18 @@ static int spi_gpio_probe(struct platform_device *pdev)
struct spi_gpio *spi_gpio;
struct device *dev = &pdev->dev;
struct spi_bitbang *bb;
- const struct of_device_id *of_id;
-
- of_id = of_match_device(spi_gpio_dt_ids, &pdev->dev);
master = spi_alloc_master(dev, sizeof(*spi_gpio));
if (!master)
return -ENOMEM;
status = devm_add_action_or_reset(&pdev->dev, spi_gpio_put, master);
- if (status)
+ if (status) {
+ spi_master_put(master);
return status;
+ }
- if (of_id)
+ if (pdev->dev.of_node)
status = spi_gpio_probe_dt(pdev, master);
else
status = spi_gpio_probe_pdata(pdev, master);
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index 439b01e4a2c8..f4a8f470aecc 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -673,6 +673,8 @@ static int img_spfi_probe(struct platform_device *pdev)
dma_release_channel(spfi->tx_ch);
if (spfi->rx_ch)
dma_release_channel(spfi->rx_ch);
+ spfi->tx_ch = NULL;
+ spfi->rx_ch = NULL;
dev_warn(spfi->dev, "Failed to get DMA channels, falling back to PIO mode\n");
} else {
master->dma_tx = spfi->tx_ch;
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 09c9a1edb2c6..49f0099db0cb 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1272,7 +1272,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
/* Prepare for TX DMA: */
- master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ master->dma_tx = dma_request_chan(dev, "tx");
if (IS_ERR(master->dma_tx)) {
ret = PTR_ERR(master->dma_tx);
dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
@@ -1281,7 +1281,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
}
/* Prepare for RX : */
- master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ master->dma_rx = dma_request_chan(dev, "rx");
if (IS_ERR(master->dma_rx)) {
ret = PTR_ERR(master->dma_rx);
dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c
index 9dfe8b04e688..1fd7ee53d451 100644
--- a/drivers/spi/spi-lantiq-ssc.c
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -797,7 +797,6 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct spi_master *master;
- struct resource *res;
struct lantiq_ssc_spi *spi;
const struct lantiq_ssc_hwcfg *hwcfg;
const struct of_device_id *match;
@@ -812,12 +811,6 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
}
hwcfg = match->data;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "failed to get resources\n");
- return -ENXIO;
- }
-
rx_irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME);
if (rx_irq < 0)
return -ENXIO;
@@ -839,8 +832,7 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
spi->dev = dev;
spi->hwcfg = hwcfg;
platform_set_drvdata(pdev, spi);
-
- spi->regbase = devm_ioremap_resource(dev, res);
+ spi->regbase = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(spi->regbase)) {
err = PTR_ERR(spi->regbase);
goto err_master_put;
diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
index 6f18d4952767..b6d79cd156fb 100644
--- a/drivers/spi/spi-loopback-test.c
+++ b/drivers/spi/spi-loopback-test.c
@@ -298,12 +298,18 @@ static struct spi_test spi_tests[] = {
{
.tx_buf = TX(0),
.rx_buf = RX(0),
- .delay_usecs = 1000,
+ .delay = {
+ .value = 1000,
+ .unit = SPI_DELAY_UNIT_USECS,
+ },
},
{
.tx_buf = TX(0),
.rx_buf = RX(0),
- .delay_usecs = 1000,
+ .delay = {
+ .value = 1000,
+ .unit = SPI_DELAY_UNIT_USECS,
+ },
},
},
},
@@ -537,7 +543,7 @@ static int spi_test_check_elapsed_time(struct spi_device *spi,
unsigned long long nbits = (unsigned long long)BITS_PER_BYTE *
xfer->len;
- delay_usecs += xfer->delay_usecs;
+ delay_usecs += xfer->delay.value;
if (!xfer->speed_hz)
continue;
estimated_time += div_u64(nbits * NSEC_PER_SEC, xfer->speed_hz);
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 9f0fa9f3116d..e5a46f0eb93b 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -286,7 +286,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
if (!spi_mem_internal_supports_op(mem, op))
return -ENOTSUPP;
- if (ctlr->mem_ops) {
+ if (ctlr->mem_ops && !mem->spi->cs_gpiod) {
ret = spi_mem_access_start(mem);
if (ret)
return ret;
diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c
index a337b842ae8c..ea1b07953d38 100644
--- a/drivers/spi/spi-mpc512x-psc.c
+++ b/drivers/spi/spi-mpc512x-psc.c
@@ -311,8 +311,7 @@ static int mpc512x_psc_spi_msg_xfer(struct spi_master *master,
break;
m->actual_length += t->len;
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ spi_transfer_delay_exec(t);
if (cs_change)
mpc512x_psc_spi_deactivate_cs(spi);
diff --git a/drivers/spi/spi-mpc52xx-psc.c b/drivers/spi/spi-mpc52xx-psc.c
index c7e478b9b586..17935e71b02f 100644
--- a/drivers/spi/spi-mpc52xx-psc.c
+++ b/drivers/spi/spi-mpc52xx-psc.c
@@ -234,8 +234,7 @@ static void mpc52xx_psc_spi_work(struct work_struct *work)
break;
m->actual_length += t->len;
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ spi_transfer_delay_exec(t);
if (cs_change)
mpc52xx_psc_spi_deactivate_cs(spi);
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 6888a4dcff6d..6783e12c40c2 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -139,7 +139,6 @@ static const struct mtk_spi_compatible mt8183_compat = {
* supplies it.
*/
static const struct mtk_chip_config mtk_default_chip_info = {
- .cs_pol = 0,
.sample_sel = 0,
};
@@ -230,10 +229,12 @@ static int mtk_spi_prepare_message(struct spi_master *master,
#endif
if (mdata->dev_comp->enhance_timing) {
- if (chip_config->cs_pol)
+ /* set CS polarity */
+ if (spi->mode & SPI_CS_HIGH)
reg_val |= SPI_CMD_CS_POL;
else
reg_val &= ~SPI_CMD_CS_POL;
+
if (chip_config->sample_sel)
reg_val |= SPI_CMD_SAMPLE_SEL;
else
@@ -264,6 +265,9 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable)
u32 reg_val;
struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
+ if (spi->mode & SPI_CS_HIGH)
+ enable = !enable;
+
reg_val = readl(mdata->base + SPI_CMD_REG);
if (!enable) {
reg_val |= SPI_CMD_PAUSE_EN;
@@ -619,7 +623,6 @@ static int mtk_spi_probe(struct platform_device *pdev)
struct spi_master *master;
struct mtk_spi *mdata;
const struct of_device_id *of_id;
- struct resource *res;
int i, irq, ret, addr_bits;
master = spi_alloc_master(&pdev->dev, sizeof(*mdata));
@@ -647,6 +650,10 @@ static int mtk_spi_probe(struct platform_device *pdev)
mdata = spi_master_get_devdata(master);
mdata->dev_comp = of_id->data;
+
+ if (mdata->dev_comp->enhance_timing)
+ master->mode_bits |= SPI_CS_HIGH;
+
if (mdata->dev_comp->must_tx)
master->flags = SPI_MASTER_MUST_TX;
@@ -682,15 +689,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, master);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENODEV;
- dev_err(&pdev->dev, "failed to determine base address\n");
- goto err_put_master;
- }
-
- mdata->base = devm_ioremap_resource(&pdev->dev, res);
+ mdata->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mdata->base)) {
ret = PTR_ERR(mdata->base);
goto err_put_master;
diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c
index f48563c09b97..69491f3a515d 100644
--- a/drivers/spi/spi-mxic.c
+++ b/drivers/spi/spi-mxic.c
@@ -145,8 +145,8 @@
#define LWR_SUSP_CTRL_EN BIT(31)
#define DMAS_CTRL 0x9c
-#define DMAS_CTRL_DIR_READ BIT(31)
-#define DMAS_CTRL_EN BIT(30)
+#define DMAS_CTRL_EN BIT(31)
+#define DMAS_CTRL_DIR_READ BIT(30)
#define DATA_STROB 0xa0
#define DATA_STROB_EDO_EN BIT(2)
@@ -275,7 +275,7 @@ static void mxic_spi_hw_init(struct mxic_spi *mxic)
writel(0, mxic->regs + HC_EN);
writel(0, mxic->regs + LRD_CFG);
writel(0, mxic->regs + LRD_CTRL);
- writel(HC_CFG_NIO(1) | HC_CFG_TYPE(0, HC_CFG_TYPE_SPI_NAND) |
+ writel(HC_CFG_NIO(1) | HC_CFG_TYPE(0, HC_CFG_TYPE_SPI_NOR) |
HC_CFG_SLV_ACT(0) | HC_CFG_MAN_CS_EN | HC_CFG_IDLE_SIO_LVL(1),
mxic->regs + HC_CFG);
}
@@ -346,7 +346,7 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
if (op->addr.nbytes > 7)
return false;
- return true;
+ return spi_mem_default_supports_op(mem, op);
}
static int mxic_spi_mem_exec_op(struct spi_mem *mem,
diff --git a/drivers/spi/spi-npcm-pspi.c b/drivers/spi/spi-npcm-pspi.c
index b191d57d1dc0..fe624731c74c 100644
--- a/drivers/spi/spi-npcm-pspi.c
+++ b/drivers/spi/spi-npcm-pspi.c
@@ -293,7 +293,6 @@ static void npcm_pspi_reset_hw(struct npcm_pspi *priv)
static irqreturn_t npcm_pspi_handler(int irq, void *dev_id)
{
struct npcm_pspi *priv = dev_id;
- u16 val;
u8 stat;
stat = ioread8(priv->base + NPCM_PSPI_STAT);
@@ -303,7 +302,7 @@ static irqreturn_t npcm_pspi_handler(int irq, void *dev_id)
if (priv->tx_buf) {
if (stat & NPCM_PSPI_STAT_RBF) {
- val = ioread8(NPCM_PSPI_DATA + priv->base);
+ ioread8(NPCM_PSPI_DATA + priv->base);
if (priv->tx_bytes == 0) {
npcm_pspi_disable(priv);
complete(&priv->xfer_done);
diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index 501b923f2c27..c36bb1bb464e 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -1027,7 +1027,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
ctlr->dev.of_node = np;
- ret = spi_register_controller(ctlr);
+ ret = devm_spi_register_controller(&pdev->dev, ctlr);
if (ret)
goto err_destroy_mutex;
diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c
index b955ca8796d2..5c704ba6d8ea 100644
--- a/drivers/spi/spi-omap-100k.c
+++ b/drivers/spi/spi-omap-100k.c
@@ -128,7 +128,7 @@ static void spi100k_write_data(struct spi_master *master, int len, int data)
static int spi100k_read_data(struct spi_master *master, int len)
{
- int dataH, dataL;
+ int dataL;
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
/* Always do at least 16 bits */
@@ -146,7 +146,7 @@ static int spi100k_read_data(struct spi_master *master, int len)
udelay(1000);
dataL = readw(spi100k->base + SPI_RX_LSB);
- dataH = readw(spi100k->base + SPI_RX_MSB);
+ readw(spi100k->base + SPI_RX_MSB);
spi100k_disable_clock(master);
return dataL;
@@ -321,8 +321,7 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master,
}
}
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ spi_transfer_delay_exec(t);
/* ignore the "leave it on after last xfer" hint */
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 848e03e5f42d..7e2292c11d12 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -397,30 +397,26 @@ static void omap2_mcspi_tx_dma(struct spi_device *spi,
{
struct omap2_mcspi *mcspi;
struct omap2_mcspi_dma *mcspi_dma;
+ struct dma_async_tx_descriptor *tx;
mcspi = spi_master_get_devdata(spi->master);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
- if (mcspi_dma->dma_tx) {
- struct dma_async_tx_descriptor *tx;
+ dmaengine_slave_config(mcspi_dma->dma_tx, &cfg);
- dmaengine_slave_config(mcspi_dma->dma_tx, &cfg);
-
- tx = dmaengine_prep_slave_sg(mcspi_dma->dma_tx, xfer->tx_sg.sgl,
- xfer->tx_sg.nents,
- DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (tx) {
- tx->callback = omap2_mcspi_tx_callback;
- tx->callback_param = spi;
- dmaengine_submit(tx);
- } else {
- /* FIXME: fall back to PIO? */
- }
+ tx = dmaengine_prep_slave_sg(mcspi_dma->dma_tx, xfer->tx_sg.sgl,
+ xfer->tx_sg.nents,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (tx) {
+ tx->callback = omap2_mcspi_tx_callback;
+ tx->callback_param = spi;
+ dmaengine_submit(tx);
+ } else {
+ /* FIXME: fall back to PIO? */
}
dma_async_issue_pending(mcspi_dma->dma_tx);
omap2_mcspi_set_dma_req(spi, 0, 1);
-
}
static unsigned
@@ -439,6 +435,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
int word_len, element_count;
struct omap2_mcspi_cs *cs = spi->controller_state;
void __iomem *chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
+ struct dma_async_tx_descriptor *tx;
mcspi = spi_master_get_devdata(spi->master);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
@@ -462,55 +459,47 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
else /* word_len <= 32 */
element_count = count >> 2;
- if (mcspi_dma->dma_rx) {
- struct dma_async_tx_descriptor *tx;
- dmaengine_slave_config(mcspi_dma->dma_rx, &cfg);
+ dmaengine_slave_config(mcspi_dma->dma_rx, &cfg);
+ /*
+ * Reduce DMA transfer length by one more if McSPI is
+ * configured in turbo mode.
+ */
+ if ((l & OMAP2_MCSPI_CHCONF_TURBO) && mcspi->fifo_depth == 0)
+ transfer_reduction += es;
+
+ if (transfer_reduction) {
+ /* Split sgl into two. The second sgl won't be used. */
+ sizes[0] = count - transfer_reduction;
+ sizes[1] = transfer_reduction;
+ nb_sizes = 2;
+ } else {
/*
- * Reduce DMA transfer length by one more if McSPI is
- * configured in turbo mode.
+ * Don't bother splitting the sgl. This essentially
+ * clones the original sgl.
*/
- if ((l & OMAP2_MCSPI_CHCONF_TURBO) && mcspi->fifo_depth == 0)
- transfer_reduction += es;
-
- if (transfer_reduction) {
- /* Split sgl into two. The second sgl won't be used. */
- sizes[0] = count - transfer_reduction;
- sizes[1] = transfer_reduction;
- nb_sizes = 2;
- } else {
- /*
- * Don't bother splitting the sgl. This essentially
- * clones the original sgl.
- */
- sizes[0] = count;
- nb_sizes = 1;
- }
+ sizes[0] = count;
+ nb_sizes = 1;
+ }
- ret = sg_split(xfer->rx_sg.sgl, xfer->rx_sg.nents,
- 0, nb_sizes,
- sizes,
- sg_out, out_mapped_nents,
- GFP_KERNEL);
+ ret = sg_split(xfer->rx_sg.sgl, xfer->rx_sg.nents, 0, nb_sizes,
+ sizes, sg_out, out_mapped_nents, GFP_KERNEL);
- if (ret < 0) {
- dev_err(&spi->dev, "sg_split failed\n");
- return 0;
- }
+ if (ret < 0) {
+ dev_err(&spi->dev, "sg_split failed\n");
+ return 0;
+ }
- tx = dmaengine_prep_slave_sg(mcspi_dma->dma_rx,
- sg_out[0],
- out_mapped_nents[0],
- DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (tx) {
- tx->callback = omap2_mcspi_rx_callback;
- tx->callback_param = spi;
- dmaengine_submit(tx);
- } else {
- /* FIXME: fall back to PIO? */
- }
+ tx = dmaengine_prep_slave_sg(mcspi_dma->dma_rx, sg_out[0],
+ out_mapped_nents[0], DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (tx) {
+ tx->callback = omap2_mcspi_rx_callback;
+ tx->callback_param = spi;
+ dmaengine_submit(tx);
+ } else {
+ /* FIXME: fall back to PIO? */
}
dma_async_issue_pending(mcspi_dma->dma_rx);
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 6643ccdc2508..c7266ef295fd 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -467,8 +467,7 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0)
goto out;
count--;
- if (xfer->word_delay_usecs)
- udelay(xfer->word_delay_usecs);
+ spi_delay_exec(&xfer->word_delay, xfer);
} while (count);
} else if (word_len == 16) {
const u16 *tx = xfer->tx_buf;
@@ -478,8 +477,7 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0)
goto out;
count -= 2;
- if (xfer->word_delay_usecs)
- udelay(xfer->word_delay_usecs);
+ spi_delay_exec(&xfer->word_delay, xfer);
} while (count);
}
@@ -772,9 +770,6 @@ static int orion_spi_probe(struct platform_device *pdev)
if (status < 0)
goto out_rel_pm;
- pm_runtime_mark_last_busy(&pdev->dev);
- pm_runtime_put_autosuspend(&pdev->dev);
-
master->dev.of_node = pdev->dev.of_node;
status = spi_register_master(master);
if (status < 0)
diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c
index 69f517ec59c6..156961b4ca86 100644
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -606,25 +606,30 @@ static void pic32_spi_cleanup(struct spi_device *spi)
gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
}
-static void pic32_spi_dma_prep(struct pic32_spi *pic32s, struct device *dev)
+static int pic32_spi_dma_prep(struct pic32_spi *pic32s, struct device *dev)
{
struct spi_master *master = pic32s->master;
- dma_cap_mask_t mask;
+ int ret = 0;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
+ master->dma_rx = dma_request_chan(dev, "spi-rx");
+ if (IS_ERR(master->dma_rx)) {
+ if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER)
+ ret = -EPROBE_DEFER;
+ else
+ dev_warn(dev, "RX channel not found.\n");
- master->dma_rx = dma_request_slave_channel_compat(mask, NULL, NULL,
- dev, "spi-rx");
- if (!master->dma_rx) {
- dev_warn(dev, "RX channel not found.\n");
+ master->dma_rx = NULL;
goto out_err;
}
- master->dma_tx = dma_request_slave_channel_compat(mask, NULL, NULL,
- dev, "spi-tx");
- if (!master->dma_tx) {
- dev_warn(dev, "TX channel not found.\n");
+ master->dma_tx = dma_request_chan(dev, "spi-tx");
+ if (IS_ERR(master->dma_tx)) {
+ if (PTR_ERR(master->dma_tx) == -EPROBE_DEFER)
+ ret = -EPROBE_DEFER;
+ else
+ dev_warn(dev, "TX channel not found.\n");
+
+ master->dma_tx = NULL;
goto out_err;
}
@@ -634,14 +639,20 @@ static void pic32_spi_dma_prep(struct pic32_spi *pic32s, struct device *dev)
/* DMA chnls allocated and prepared */
set_bit(PIC32F_DMA_PREP, &pic32s->flags);
- return;
+ return 0;
out_err:
- if (master->dma_rx)
+ if (master->dma_rx) {
dma_release_channel(master->dma_rx);
+ master->dma_rx = NULL;
+ }
- if (master->dma_tx)
+ if (master->dma_tx) {
dma_release_channel(master->dma_tx);
+ master->dma_tx = NULL;
+ }
+
+ return ret;
}
static void pic32_spi_dma_unprep(struct pic32_spi *pic32s)
@@ -776,7 +787,10 @@ static int pic32_spi_probe(struct platform_device *pdev)
master->unprepare_transfer_hardware = pic32_spi_unprepare_hardware;
/* optional DMA support */
- pic32_spi_dma_prep(pic32s, &pdev->dev);
+ ret = pic32_spi_dma_prep(pic32s, &pdev->dev);
+ if (ret)
+ goto err_bailout;
+
if (test_bit(PIC32F_DMA_PREP, &pic32s->flags))
master->can_dma = pic32_spi_can_dma;
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 7fedea67159c..66028ebbc336 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -485,12 +485,11 @@ static void giveback(struct pl022 *pl022)
struct spi_transfer, transfer_list);
/* Delay if requested before any change in chip select */
- if (last_transfer->delay_usecs)
- /*
- * FIXME: This runs in interrupt context.
- * Is this really smart?
- */
- udelay(last_transfer->delay_usecs);
+ /*
+ * FIXME: This runs in interrupt context.
+ * Is this really smart?
+ */
+ spi_transfer_delay_exec(last_transfer);
if (!last_transfer->cs_change) {
struct spi_message *next_msg;
@@ -1159,7 +1158,7 @@ static int pl022_dma_autoprobe(struct pl022 *pl022)
int err;
/* automatically configure DMA channels from platform, normally using DT */
- chan = dma_request_slave_channel_reason(dev, "rx");
+ chan = dma_request_chan(dev, "rx");
if (IS_ERR(chan)) {
err = PTR_ERR(chan);
goto err_no_rxchan;
@@ -1167,7 +1166,7 @@ static int pl022_dma_autoprobe(struct pl022 *pl022)
pl022->dma_rx_channel = chan;
- chan = dma_request_slave_channel_reason(dev, "tx");
+ chan = dma_request_chan(dev, "tx");
if (IS_ERR(chan)) {
err = PTR_ERR(chan);
goto err_no_txchan;
@@ -1401,12 +1400,11 @@ static void pump_transfers(unsigned long data)
previous = list_entry(transfer->transfer_list.prev,
struct spi_transfer,
transfer_list);
- if (previous->delay_usecs)
- /*
- * FIXME: This runs in interrupt context.
- * Is this really smart?
- */
- udelay(previous->delay_usecs);
+ /*
+ * FIXME: This runs in interrupt context.
+ * Is this really smart?
+ */
+ spi_transfer_delay_exec(previous);
/* Reselect chip select only if cs_change was requested */
if (previous->cs_change)
@@ -1520,8 +1518,7 @@ static void do_polling_transfer(struct pl022 *pl022)
previous =
list_entry(transfer->transfer_list.prev,
struct spi_transfer, transfer_list);
- if (previous->delay_usecs)
- udelay(previous->delay_usecs);
+ spi_transfer_delay_exec(previous);
if (previous->cs_change)
pl022_cs_control(pl022, SSP_CHIP_SELECT);
} else {
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index bb6a14d1ab0f..16b6b2ad4e7c 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -4,27 +4,29 @@
* Copyright (C) 2013, Intel Corporation
*/
+#include <linux/acpi.h>
#include <linux/bitops.h>
-#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/slab.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/spi/spi.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio/consumer.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/pm_runtime.h>
-#include <linux/acpi.h>
-#include <linux/of_device.h>
#include "spi-pxa2xx.h"
@@ -1457,6 +1459,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
{ PCI_VDEVICE(INTEL, 0x02aa), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0x02ab), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0x02fb), LPSS_CNL_SSP },
+ /* CML-H */
+ { PCI_VDEVICE(INTEL, 0x06aa), LPSS_CNL_SSP },
+ { PCI_VDEVICE(INTEL, 0x06ab), LPSS_CNL_SSP },
+ { PCI_VDEVICE(INTEL, 0x06fb), LPSS_CNL_SSP },
/* TGL-LP */
{ PCI_VDEVICE(INTEL, 0xa0aa), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0xa0ab), LPSS_CNL_SSP },
@@ -1476,11 +1482,13 @@ MODULE_DEVICE_TABLE(of, pxa2xx_spi_of_match);
#ifdef CONFIG_ACPI
-static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
+static int pxa2xx_spi_get_port_id(struct device *dev)
{
+ struct acpi_device *adev;
unsigned int devid;
int port_id = -1;
+ adev = ACPI_COMPANION(dev);
if (adev && adev->pnp.unique_id &&
!kstrtouint(adev->pnp.unique_id, 0, &devid))
port_id = devid;
@@ -1489,7 +1497,7 @@ static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
#else /* !CONFIG_ACPI */
-static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
+static int pxa2xx_spi_get_port_id(struct device *dev)
{
return -1;
}
@@ -1510,34 +1518,22 @@ static struct pxa2xx_spi_controller *
pxa2xx_spi_init_pdata(struct platform_device *pdev)
{
struct pxa2xx_spi_controller *pdata;
- struct acpi_device *adev;
struct ssp_device *ssp;
struct resource *res;
- const struct acpi_device_id *adev_id = NULL;
+ struct device *parent = pdev->dev.parent;
+ struct pci_dev *pcidev = dev_is_pci(parent) ? to_pci_dev(parent) : NULL;
const struct pci_device_id *pcidev_id = NULL;
- const struct of_device_id *of_id = NULL;
enum pxa_ssp_type type;
+ const void *match;
- adev = ACPI_COMPANION(&pdev->dev);
-
- if (pdev->dev.of_node)
- of_id = of_match_device(pdev->dev.driver->of_match_table,
- &pdev->dev);
- else if (dev_is_pci(pdev->dev.parent))
- pcidev_id = pci_match_id(pxa2xx_spi_pci_compound_match,
- to_pci_dev(pdev->dev.parent));
- else if (adev)
- adev_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
- &pdev->dev);
- else
- return NULL;
+ if (pcidev)
+ pcidev_id = pci_match_id(pxa2xx_spi_pci_compound_match, pcidev);
- if (adev_id)
- type = (enum pxa_ssp_type)adev_id->driver_data;
+ match = device_get_match_data(&pdev->dev);
+ if (match)
+ type = (enum pxa_ssp_type)match;
else if (pcidev_id)
type = (enum pxa_ssp_type)pcidev_id->driver_data;
- else if (of_id)
- type = (enum pxa_ssp_type)of_id->data;
else
return NULL;
@@ -1545,32 +1541,36 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
if (!pdata)
return NULL;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return NULL;
-
ssp = &pdata->ssp;
- ssp->phys_base = res->start;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ssp->mmio_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(ssp->mmio_base))
return NULL;
+ ssp->phys_base = res->start;
+
#ifdef CONFIG_PCI
if (pcidev_id) {
- pdata->tx_param = pdev->dev.parent;
- pdata->rx_param = pdev->dev.parent;
+ pdata->tx_param = parent;
+ pdata->rx_param = parent;
pdata->dma_filter = pxa2xx_spi_idma_filter;
}
#endif
ssp->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ssp->clk))
+ return NULL;
+
ssp->irq = platform_get_irq(pdev, 0);
+ if (ssp->irq < 0)
+ return NULL;
+
ssp->type = type;
- ssp->pdev = pdev;
- ssp->port_id = pxa2xx_spi_get_port_id(adev);
+ ssp->dev = &pdev->dev;
+ ssp->port_id = pxa2xx_spi_get_port_id(&pdev->dev);
- pdata->is_slave = of_property_read_bool(pdev->dev.of_node, "spi-slave");
+ pdata->is_slave = device_property_read_bool(&pdev->dev, "spi-slave");
pdata->num_chipselect = 1;
pdata->enable_dma = true;
pdata->dma_burst_size = 1;
@@ -1602,6 +1602,11 @@ static int pxa2xx_spi_fw_translate_cs(struct spi_controller *controller,
return cs;
}
+static size_t pxa2xx_spi_max_dma_transfer_size(struct spi_device *spi)
+{
+ return MAX_DMA_LEN;
+}
+
static int pxa2xx_spi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1707,6 +1712,8 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
} else {
controller->can_dma = pxa2xx_spi_can_dma;
controller->max_dma_len = MAX_DMA_LEN;
+ controller->max_transfer_size =
+ pxa2xx_spi_max_dma_transfer_size;
}
}
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 2f559e531100..dd3434a407ea 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -932,11 +932,11 @@ static int spi_qup_init_dma(struct spi_master *master, resource_size_t base)
int ret;
/* allocate dma resources, if available */
- master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ master->dma_rx = dma_request_chan(dev, "rx");
if (IS_ERR(master->dma_rx))
return PTR_ERR(master->dma_rx);
- master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ master->dma_tx = dma_request_chan(dev, "tx");
if (IS_ERR(master->dma_tx)) {
ret = PTR_ERR(master->dma_tx);
goto err_tx;
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 15f5723d9f95..7222c7689c3c 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -1257,9 +1257,9 @@ static int rspi_probe(struct platform_device *pdev)
ctlr->flags = ops->flags;
ctlr->dev.of_node = pdev->dev.of_node;
- ret = platform_get_irq_byname(pdev, "rx");
+ ret = platform_get_irq_byname_optional(pdev, "rx");
if (ret < 0) {
- ret = platform_get_irq_byname(pdev, "mux");
+ ret = platform_get_irq_byname_optional(pdev, "mux");
if (ret < 0)
ret = platform_get_irq(pdev, 0);
if (ret >= 0)
@@ -1270,10 +1270,6 @@ static int rspi_probe(struct platform_device *pdev)
if (ret >= 0)
rspi->tx_irq = ret;
}
- if (ret < 0) {
- dev_err(&pdev->dev, "platform_get_irq error\n");
- goto error2;
- }
if (rspi->rx_irq == rspi->tx_irq) {
/* Single multiplexed interrupt */
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 7b7151ec14c8..cf67ea60dc0e 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1154,15 +1154,13 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
if (!is_polling(sdd)) {
/* Acquire DMA channels */
- sdd->rx_dma.ch = dma_request_slave_channel_reason(&pdev->dev,
- "rx");
+ sdd->rx_dma.ch = dma_request_chan(&pdev->dev, "rx");
if (IS_ERR(sdd->rx_dma.ch)) {
dev_err(&pdev->dev, "Failed to get RX DMA channel\n");
ret = PTR_ERR(sdd->rx_dma.ch);
goto err_disable_io_clk;
}
- sdd->tx_dma.ch = dma_request_slave_channel_reason(&pdev->dev,
- "tx");
+ sdd->tx_dma.ch = dma_request_chan(&pdev->dev, "tx");
if (IS_ERR(sdd->tx_dma.ch)) {
dev_err(&pdev->dev, "Failed to get TX DMA channel\n");
ret = PTR_ERR(sdd->tx_dma.ch);
diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c
index 11acddc83304..5497eeb3bf3e 100644
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -211,8 +211,7 @@ static int sc18is602_transfer_one(struct spi_master *master,
}
status = 0;
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ spi_transfer_delay_exec(t);
}
m->status = status;
spi_finalize_current_message(master);
diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c
index 7f73f91d412a..a62034e2a7cb 100644
--- a/drivers/spi/spi-sh-hspi.c
+++ b/drivers/spi/spi-sh-hspi.c
@@ -190,8 +190,7 @@ static int hspi_transfer_one_message(struct spi_controller *ctlr,
msg->actual_length += t->len;
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ spi_transfer_delay_exec(t);
if (cs_change) {
ndelay(nsecs);
diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
index 35254bdc42c4..f7c1e20432e0 100644
--- a/drivers/spi/spi-sifive.c
+++ b/drivers/spi/spi-sifive.c
@@ -357,14 +357,14 @@ static int sifive_spi_probe(struct platform_device *pdev)
if (!cs_bits) {
dev_err(&pdev->dev, "Could not auto probe CS lines\n");
ret = -EINVAL;
- goto put_master;
+ goto disable_clk;
}
num_cs = ilog2(cs_bits) + 1;
if (num_cs > SIFIVE_SPI_MAX_CS) {
dev_err(&pdev->dev, "Invalid number of spi slaves\n");
ret = -EINVAL;
- goto put_master;
+ goto disable_clk;
}
/* Define our master */
@@ -393,7 +393,7 @@ static int sifive_spi_probe(struct platform_device *pdev)
dev_name(&pdev->dev), spi);
if (ret) {
dev_err(&pdev->dev, "Unable to bind to interrupt\n");
- goto put_master;
+ goto disable_clk;
}
dev_info(&pdev->dev, "mapped; irq=%d, cs=%d\n",
@@ -402,11 +402,13 @@ static int sifive_spi_probe(struct platform_device *pdev)
ret = devm_spi_register_master(&pdev->dev, master);
if (ret < 0) {
dev_err(&pdev->dev, "spi_register_master failed\n");
- goto put_master;
+ goto disable_clk;
}
return 0;
+disable_clk:
+ clk_disable_unprepare(spi->clk);
put_master:
spi_master_put(master);
@@ -420,6 +422,7 @@ static int sifive_spi_remove(struct platform_device *pdev)
/* Disable all the interrupts just in case */
sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0);
+ clk_disable_unprepare(spi->clk);
return 0;
}
diff --git a/drivers/spi/spi-slave-mt27xx.c b/drivers/spi/spi-slave-mt27xx.c
index 61bc43b0fe57..44edaa360405 100644
--- a/drivers/spi/spi-slave-mt27xx.c
+++ b/drivers/spi/spi-slave-mt27xx.c
@@ -368,7 +368,6 @@ static int mtk_spi_slave_probe(struct platform_device *pdev)
{
struct spi_controller *ctlr;
struct mtk_spi_slave *mdata;
- struct resource *res;
int irq, ret;
ctlr = spi_alloc_slave(&pdev->dev, sizeof(*mdata));
@@ -392,17 +391,8 @@ static int mtk_spi_slave_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ctlr);
init_completion(&mdata->xfer_done);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENODEV;
- dev_err(&pdev->dev, "failed to determine base address\n");
- goto err_put_ctlr;
- }
-
mdata->dev = &pdev->dev;
-
- mdata->base = devm_ioremap_resource(&pdev->dev, res);
+ mdata->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mdata->base)) {
ret = PTR_ERR(mdata->base);
goto err_put_ctlr;
diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c
index 9a051286f120..87dadb6b8ebf 100644
--- a/drivers/spi/spi-sprd-adi.c
+++ b/drivers/spi/spi-sprd-adi.c
@@ -77,6 +77,7 @@
/* Bits definitions for register REG_WDG_CTRL */
#define BIT_WDG_RUN BIT(1)
+#define BIT_WDG_NEW BIT(2)
#define BIT_WDG_RST BIT(3)
/* Registers definitions for PMIC */
@@ -383,6 +384,10 @@ static int sprd_adi_restart_handler(struct notifier_block *this,
/* Unlock the watchdog */
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOCK, WDG_UNLOCK_KEY);
+ sprd_adi_read(sadi, sadi->slave_pbase + REG_WDG_CTRL, &val);
+ val |= BIT_WDG_NEW;
+ sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val);
+
/* Load the watchdog timeout value, 50ms is always enough. */
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_LOW,
WDG_LOAD_VAL & WDG_LOAD_MASK);
@@ -393,6 +398,9 @@ static int sprd_adi_restart_handler(struct notifier_block *this,
val |= BIT_WDG_RUN | BIT_WDG_RST;
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val);
+ /* Lock the watchdog */
+ sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOCK, ~WDG_UNLOCK_KEY);
+
mdelay(1000);
dev_emerg(sadi->dev, "Unable to restart system\n");
diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c
index 8c9021b7f7a9..2ee1feb41681 100644
--- a/drivers/spi/spi-sprd.c
+++ b/drivers/spi/spi-sprd.c
@@ -669,11 +669,15 @@ static void sprd_spi_set_speed(struct sprd_spi *ss, u32 speed_hz)
writel_relaxed(clk_div, ss->base + SPRD_SPI_CLKD);
}
-static void sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
+static int sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
{
+ struct spi_delay *d = &t->word_delay;
u16 word_delay, interval;
u32 val;
+ if (d->unit != SPI_DELAY_UNIT_SCK)
+ return -EINVAL;
+
val = readl_relaxed(ss->base + SPRD_SPI_CTL7);
val &= ~(SPRD_SPI_SCK_REV | SPRD_SPI_NG_TX | SPRD_SPI_NG_RX);
/* Set default chip selection, clock phase and clock polarity */
@@ -686,7 +690,7 @@ static void sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
* formula as below per datasheet:
* interval time (source clock cycles) = interval * 4 + 10.
*/
- word_delay = clamp_t(u16, t->word_delay, SPRD_SPI_MIN_DELAY_CYCLE,
+ word_delay = clamp_t(u16, d->value, SPRD_SPI_MIN_DELAY_CYCLE,
SPRD_SPI_MAX_DELAY_CYCLE);
interval = DIV_ROUND_UP(word_delay - 10, 4);
ss->word_delay = interval * 4 + 10;
@@ -711,6 +715,8 @@ static void sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
val &= ~SPRD_SPI_DATA_LINE2_EN;
writel_relaxed(val, ss->base + SPRD_SPI_CTL7);
+
+ return 0;
}
static int sprd_spi_setup_transfer(struct spi_device *sdev,
@@ -719,13 +725,16 @@ static int sprd_spi_setup_transfer(struct spi_device *sdev,
struct sprd_spi *ss = spi_controller_get_devdata(sdev->controller);
u8 bits_per_word = t->bits_per_word;
u32 val, mode = 0;
+ int ret;
ss->len = t->len;
ss->tx_buf = t->tx_buf;
ss->rx_buf = t->rx_buf;
ss->hw_mode = sdev->mode;
- sprd_spi_init_hw(ss, t);
+ ret = sprd_spi_init_hw(ss, t);
+ if (ret)
+ return ret;
/* Set tansfer speed and valid bits */
sprd_spi_set_speed(ss, t->speed_hz);
diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c
index 0c24c494f386..77d26d64541a 100644
--- a/drivers/spi/spi-st-ssc4.c
+++ b/drivers/spi/spi-st-ssc4.c
@@ -381,6 +381,7 @@ static int spi_st_probe(struct platform_device *pdev)
return 0;
clk_disable:
+ pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(spi_st->clk);
put_master:
spi_master_put(master);
@@ -392,6 +393,8 @@ static int spi_st_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct spi_st *spi_st = spi_master_get_devdata(master);
+ pm_runtime_disable(&pdev->dev);
+
clk_disable_unprepare(spi_st->clk);
pinctrl_pm_select_sleep_state(&pdev->dev);
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 9ac6f9fe13cf..4e726929bb4f 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -528,7 +528,6 @@ static void stm32_qspi_release(struct stm32_qspi *qspi)
stm32_qspi_dma_free(qspi);
mutex_destroy(&qspi->lock);
clk_disable_unprepare(qspi->clk);
- spi_master_put(qspi->ctrl);
}
static int stm32_qspi_probe(struct platform_device *pdev)
@@ -626,6 +625,8 @@ static int stm32_qspi_probe(struct platform_device *pdev)
err:
stm32_qspi_release(qspi);
+ spi_master_put(qspi->ctrl);
+
return ret;
}
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index 39374c2edcf3..fc40ab146c86 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -666,8 +666,7 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data *tspi,
dma_addr_t dma_phys;
int ret;
- dma_chan = dma_request_slave_channel_reason(tspi->dev,
- dma_to_memory ? "rx" : "tx");
+ dma_chan = dma_request_chan(tspi->dev, dma_to_memory ? "rx" : "tx");
if (IS_ERR(dma_chan)) {
ret = PTR_ERR(dma_chan);
if (ret != -EPROBE_DEFER)
@@ -723,15 +722,31 @@ static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi,
dma_release_channel(dma_chan);
}
-static void tegra_spi_set_hw_cs_timing(struct spi_device *spi, u8 setup_dly,
- u8 hold_dly, u8 inactive_dly)
+static int tegra_spi_set_hw_cs_timing(struct spi_device *spi,
+ struct spi_delay *setup,
+ struct spi_delay *hold,
+ struct spi_delay *inactive)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
+ u8 setup_dly, hold_dly, inactive_dly;
u32 setup_hold;
u32 spi_cs_timing;
u32 inactive_cycles;
u8 cs_state;
+ if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) ||
+ (hold && hold->unit != SPI_DELAY_UNIT_SCK) ||
+ (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) {
+ dev_err(&spi->dev,
+ "Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n",
+ SPI_DELAY_UNIT_SCK);
+ return -EINVAL;
+ }
+
+ setup_dly = setup ? setup->value : 0;
+ hold_dly = hold ? hold->value : 0;
+ inactive_dly = inactive ? inactive->value : 0;
+
setup_dly = min_t(u8, setup_dly, MAX_SETUP_HOLD_CYCLES);
hold_dly = min_t(u8, hold_dly, MAX_SETUP_HOLD_CYCLES);
if (setup_dly && hold_dly) {
@@ -758,6 +773,8 @@ static void tegra_spi_set_hw_cs_timing(struct spi_device *spi, u8 setup_dly,
tspi->spi_cs_timing2 = spi_cs_timing;
tegra_spi_writel(tspi, spi_cs_timing, SPI_CS_TIMING2);
}
+
+ return 0;
}
static u32 tegra_spi_setup_transfer_one(struct spi_device *spi,
@@ -984,17 +1001,6 @@ static int tegra_spi_setup(struct spi_device *spi)
return 0;
}
-static void tegra_spi_transfer_delay(int delay)
-{
- if (!delay)
- return;
-
- if (delay >= 1000)
- mdelay(delay / 1000);
-
- udelay(delay % 1000);
-}
-
static void tegra_spi_transfer_end(struct spi_device *spi)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
@@ -1098,7 +1104,7 @@ static int tegra_spi_transfer_one_message(struct spi_master *master,
complete_xfer:
if (ret < 0 || skip) {
tegra_spi_transfer_end(spi);
- tegra_spi_transfer_delay(xfer->delay_usecs);
+ spi_transfer_delay_exec(xfer);
goto exit;
} else if (list_is_last(&xfer->transfer_list,
&msg->transfers)) {
@@ -1106,11 +1112,11 @@ complete_xfer:
tspi->cs_control = spi;
else {
tegra_spi_transfer_end(spi);
- tegra_spi_transfer_delay(xfer->delay_usecs);
+ spi_transfer_delay_exec(xfer);
}
} else if (xfer->cs_change) {
tegra_spi_transfer_end(spi);
- tegra_spi_transfer_delay(xfer->delay_usecs);
+ spi_transfer_delay_exec(xfer);
}
}
diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c
index a841a7250d14..514429379206 100644
--- a/drivers/spi/spi-tegra20-sflash.c
+++ b/drivers/spi/spi-tegra20-sflash.c
@@ -341,10 +341,11 @@ static int tegra_sflash_transfer_one_message(struct spi_master *master,
goto exit;
}
msg->actual_length += xfer->len;
- if (xfer->cs_change && xfer->delay_usecs) {
+ if (xfer->cs_change &&
+ (xfer->delay_usecs || xfer->delay.value)) {
tegra_sflash_writel(tsd, tsd->def_command_reg,
SPI_COMMAND);
- udelay(xfer->delay_usecs);
+ spi_transfer_delay_exec(xfer);
}
}
ret = 0;
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 111fffc91435..7f4d932dade7 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -599,8 +599,7 @@ static int tegra_slink_init_dma_param(struct tegra_slink_data *tspi,
int ret;
struct dma_slave_config dma_sconfig;
- dma_chan = dma_request_slave_channel_reason(tspi->dev,
- dma_to_memory ? "rx" : "tx");
+ dma_chan = dma_request_chan(tspi->dev, dma_to_memory ? "rx" : "tx");
if (IS_ERR(dma_chan)) {
ret = PTR_ERR(dma_chan);
if (ret != -EPROBE_DEFER)
@@ -1073,7 +1072,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
ret = clk_enable(tspi->clk);
if (ret < 0) {
dev_err(&pdev->dev, "Clock enable failed %d\n", ret);
- goto exit_free_master;
+ goto exit_clk_unprepare;
}
spi_irq = platform_get_irq(pdev, 0);
@@ -1146,6 +1145,8 @@ exit_free_irq:
free_irq(spi_irq, tspi);
exit_clk_disable:
clk_disable(tspi->clk);
+exit_clk_unprepare:
+ clk_unprepare(tspi->clk);
exit_free_master:
spi_master_put(master);
return ret;
@@ -1159,6 +1160,7 @@ static int tegra_slink_remove(struct platform_device *pdev)
free_irq(tspi->irq, tspi);
clk_disable(tspi->clk);
+ clk_unprepare(tspi->clk);
if (tspi->tx_dma_chan)
tegra_slink_deinit_dma_param(tspi, false);
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index f88cbb94ce12..223353fa2d8a 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -1229,12 +1229,7 @@ static void pch_spi_process_messages(struct work_struct *pwork)
"%s:data->current_msg->actual_length=%d\n",
__func__, data->current_msg->actual_length);
- /* check for delay */
- if (data->cur_trans->delay_usecs) {
- dev_dbg(&data->master->dev, "%s:delay in usec=%d\n",
- __func__, data->cur_trans->delay_usecs);
- udelay(data->cur_trans->delay_usecs);
- }
+ spi_transfer_delay_exec(data->cur_trans);
spin_lock(&data->lock);
diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c
index 51759d3fd45f..3606232f190f 100644
--- a/drivers/spi/spi-txx9.c
+++ b/drivers/spi/spi-txx9.c
@@ -26,7 +26,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
#define SPI_FIFO_SIZE 4
@@ -79,7 +80,7 @@ struct txx9spi {
void __iomem *membase;
int baseclk;
struct clk *clk;
- int last_chipselect;
+ struct gpio_desc *last_chipselect;
int last_chipselect_val;
};
@@ -95,20 +96,22 @@ static void txx9spi_wr(struct txx9spi *c, u32 val, int reg)
static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c,
int on, unsigned int cs_delay)
{
- int val = (spi->mode & SPI_CS_HIGH) ? on : !on;
-
+ /*
+ * The GPIO descriptor will track polarity inversion inside
+ * gpiolib.
+ */
if (on) {
/* deselect the chip with cs_change hint in last transfer */
- if (c->last_chipselect >= 0)
- gpio_set_value(c->last_chipselect,
+ if (c->last_chipselect)
+ gpiod_set_value(c->last_chipselect,
!c->last_chipselect_val);
- c->last_chipselect = spi->chip_select;
- c->last_chipselect_val = val;
+ c->last_chipselect = spi->cs_gpiod;
+ c->last_chipselect_val = on;
} else {
- c->last_chipselect = -1;
+ c->last_chipselect = NULL;
ndelay(cs_delay); /* CS Hold Time */
}
- gpio_set_value(spi->chip_select, val);
+ gpiod_set_value(spi->cs_gpiod, on);
ndelay(cs_delay); /* CS Setup Time / CS Recovery Time */
}
@@ -119,12 +122,6 @@ static int txx9spi_setup(struct spi_device *spi)
if (!spi->max_speed_hz)
return -EINVAL;
- if (gpio_direction_output(spi->chip_select,
- !(spi->mode & SPI_CS_HIGH))) {
- dev_err(&spi->dev, "Cannot setup GPIO for chipselect.\n");
- return -EINVAL;
- }
-
/* deselect chip */
spin_lock(&c->lock);
txx9spi_cs_func(spi, c, 0, (NSEC_PER_SEC / 2) / spi->max_speed_hz);
@@ -248,8 +245,7 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m)
len -= count * wsize;
}
m->actual_length += t->len;
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ spi_transfer_delay_exec(t);
if (!cs_change)
continue;
@@ -320,6 +316,47 @@ static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
return 0;
}
+/*
+ * Chip select uses GPIO only, further the driver is using the chip select
+ * numer (from the device tree "reg" property, and this can only come from
+ * device tree since this i MIPS and there is no way to pass platform data) as
+ * the GPIO number. As the platform has only one GPIO controller (the txx9 GPIO
+ * chip) it is thus using the chip select number as an offset into that chip.
+ * This chip has a maximum of 16 GPIOs 0..15 and this is what all platforms
+ * register.
+ *
+ * We modernized this behaviour by explicitly converting that offset to an
+ * offset on the GPIO chip using a GPIO descriptor machine table of the same
+ * size as the txx9 GPIO chip with a 1-to-1 mapping of chip select to GPIO
+ * offset.
+ *
+ * This is admittedly a hack, but it is countering the hack of using "reg" to
+ * contain a GPIO offset when it should be using "cs-gpios" as the SPI bindings
+ * state.
+ */
+static struct gpiod_lookup_table txx9spi_cs_gpio_table = {
+ .dev_id = "spi0",
+ .table = {
+ GPIO_LOOKUP_IDX("TXx9", 0, "cs", 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 1, "cs", 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 2, "cs", 2, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 3, "cs", 3, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 4, "cs", 4, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 5, "cs", 5, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 6, "cs", 6, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 7, "cs", 7, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 8, "cs", 8, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 9, "cs", 9, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 10, "cs", 10, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 11, "cs", 11, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 12, "cs", 12, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 13, "cs", 13, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 14, "cs", 14, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("TXx9", 15, "cs", 15, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static int txx9spi_probe(struct platform_device *dev)
{
struct spi_master *master;
@@ -373,12 +410,14 @@ static int txx9spi_probe(struct platform_device *dev)
if (ret)
goto exit;
- c->last_chipselect = -1;
+ c->last_chipselect = NULL;
dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n",
(unsigned long long)res->start, irq,
(c->baseclk + 500000) / 1000000);
+ gpiod_add_lookup_table(&txx9spi_cs_gpio_table);
+
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA;
@@ -387,6 +426,7 @@ static int txx9spi_probe(struct platform_device *dev)
master->transfer = txx9spi_transfer;
master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+ master->use_gpio_descriptors = true;
ret = devm_spi_register_master(&dev->dev, master);
if (ret)
diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c
index a3496c46cc1b..1d9b3f03d986 100644
--- a/drivers/spi/spi-xcomm.c
+++ b/drivers/spi/spi-xcomm.c
@@ -188,8 +188,7 @@ static int spi_xcomm_transfer_one(struct spi_master *master,
}
status = 0;
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ spi_transfer_delay_exec(t);
is_first = false;
}
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index d5f9d5fbb3e8..8dd2bb99cb4d 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -391,7 +391,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
struct xilinx_spi *xspi;
struct xspi_platform_data *pdata;
struct resource *res;
- int ret, num_cs = 0, bits_per_word = 8;
+ int ret, num_cs = 0, bits_per_word;
struct spi_master *master;
u32 tmp;
u8 i;
@@ -403,6 +403,11 @@ static int xilinx_spi_probe(struct platform_device *pdev)
} else {
of_property_read_u32(pdev->dev.of_node, "xlnx,num-ss-bits",
&num_cs);
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "xlnx,num-transfer-bits",
+ &bits_per_word);
+ if (ret)
+ bits_per_word = 8;
}
if (!num_cs) {
diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c
index 86516eb1e143..fc2b5eb7d614 100644
--- a/drivers/spi/spi-xtensa-xtfpga.c
+++ b/drivers/spi/spi-xtensa-xtfpga.c
@@ -80,7 +80,6 @@ static void xtfpga_spi_chipselect(struct spi_device *spi, int is_on)
static int xtfpga_spi_probe(struct platform_device *pdev)
{
struct xtfpga_spi *xspi;
- struct resource *mem;
int ret;
struct spi_master *master;
@@ -97,14 +96,7 @@ static int xtfpga_spi_probe(struct platform_device *pdev)
xspi->bitbang.master = master;
xspi->bitbang.chipselect = xtfpga_spi_chipselect;
xspi->bitbang.txrx_word[SPI_MODE_0] = xtfpga_spi_txrx_word;
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "No memory resource\n");
- ret = -ENODEV;
- goto err;
- }
- xspi->regs = devm_ioremap_resource(&pdev->dev, mem);
+ xspi->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(xspi->regs)) {
ret = PTR_ERR(xspi->regs);
goto err;
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 5cf6993ddce5..17641157354d 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -7,7 +7,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -51,7 +50,6 @@
#define ZYNQ_QSPI_CONFIG_BDRATE_MASK GENMASK(5, 3) /* Baud Rate Mask */
#define ZYNQ_QSPI_CONFIG_CPHA_MASK BIT(2) /* Clock Phase Control */
#define ZYNQ_QSPI_CONFIG_CPOL_MASK BIT(1) /* Clock Polarity Control */
-#define ZYNQ_QSPI_CONFIG_SSCTRL_MASK BIT(10) /* Slave Select Mask */
#define ZYNQ_QSPI_CONFIG_FWIDTH_MASK GENMASK(7, 6) /* FIFO width */
#define ZYNQ_QSPI_CONFIG_MSTREN_MASK BIT(0) /* Master Mode */
@@ -61,9 +59,9 @@
* These are the values used in the calculation of baud rate divisor and
* setting the slave select.
*/
-#define ZYNQ_QSPI_BAUD_DIV_MAX GENMASK(2, 0) /* Baud rate maximum */
-#define ZYNQ_QSPI_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift in CR */
-#define ZYNQ_QSPI_SS_SHIFT 10 /* Slave Select field shift in CR */
+#define ZYNQ_QSPI_CONFIG_BAUD_DIV_MAX GENMASK(2, 0) /* Baud rate maximum */
+#define ZYNQ_QSPI_CONFIG_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift */
+#define ZYNQ_QSPI_CONFIG_PCS BIT(10) /* Peripheral Chip Select */
/*
* QSPI Interrupt Registers bit Masks
@@ -99,9 +97,9 @@
* It is named Linear Configuration but it controls other modes when not in
* linear mode also.
*/
-#define ZYNQ_QSPI_LCFG_TWO_MEM_MASK BIT(30) /* LQSPI Two memories Mask */
-#define ZYNQ_QSPI_LCFG_SEP_BUS_MASK BIT(29) /* LQSPI Separate bus Mask */
-#define ZYNQ_QSPI_LCFG_U_PAGE_MASK BIT(28) /* LQSPI Upper Page Mask */
+#define ZYNQ_QSPI_LCFG_TWO_MEM BIT(30) /* LQSPI Two memories */
+#define ZYNQ_QSPI_LCFG_SEP_BUS BIT(29) /* LQSPI Separate bus */
+#define ZYNQ_QSPI_LCFG_U_PAGE BIT(28) /* LQSPI Upper Page */
#define ZYNQ_QSPI_LCFG_DUMMY_SHIFT 8
@@ -116,8 +114,8 @@
*/
#define ZYNQ_QSPI_MODEBITS (SPI_CPOL | SPI_CPHA)
-/* Default number of chip selects */
-#define ZYNQ_QSPI_DEFAULT_NUM_CS 1
+/* Maximum number of chip selects */
+#define ZYNQ_QSPI_MAX_NUM_CS 2
/**
* struct zynq_qspi - Defines qspi driver instance
@@ -161,6 +159,7 @@ static inline void zynq_qspi_write(struct zynq_qspi *xqspi, u32 offset,
/**
* zynq_qspi_init_hw - Initialize the hardware
* @xqspi: Pointer to the zynq_qspi structure
+ * @num_cs: Number of connected CS (to enable dual memories if needed)
*
* The default settings of the QSPI controller's configurable parameters on
* reset are
@@ -178,7 +177,7 @@ static inline void zynq_qspi_write(struct zynq_qspi *xqspi, u32 offset,
* - Set the little endian mode of TX FIFO and
* - Enable the QSPI controller
*/
-static void zynq_qspi_init_hw(struct zynq_qspi *xqspi)
+static void zynq_qspi_init_hw(struct zynq_qspi *xqspi, unsigned int num_cs)
{
u32 config_reg;
@@ -186,7 +185,12 @@ static void zynq_qspi_init_hw(struct zynq_qspi *xqspi)
zynq_qspi_write(xqspi, ZYNQ_QSPI_IDIS_OFFSET, ZYNQ_QSPI_IXR_ALL_MASK);
/* Disable linear mode as the boot loader may have used it */
- zynq_qspi_write(xqspi, ZYNQ_QSPI_LINEAR_CFG_OFFSET, 0);
+ config_reg = 0;
+ /* At the same time, enable dual mode if more than 1 CS is available */
+ if (num_cs > 1)
+ config_reg |= ZYNQ_QSPI_LCFG_TWO_MEM;
+
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_LINEAR_CFG_OFFSET, config_reg);
/* Clear the RX FIFO */
while (zynq_qspi_read(xqspi, ZYNQ_QSPI_STATUS_OFFSET) &
@@ -284,21 +288,28 @@ static void zynq_qspi_txfifo_op(struct zynq_qspi *xqspi, unsigned int size)
*/
static void zynq_qspi_chipselect(struct spi_device *spi, bool assert)
{
- struct spi_controller *ctrl = spi->master;
- struct zynq_qspi *xqspi = spi_controller_get_devdata(ctrl);
+ struct spi_controller *ctlr = spi->master;
+ struct zynq_qspi *xqspi = spi_controller_get_devdata(ctlr);
u32 config_reg;
- config_reg = zynq_qspi_read(xqspi, ZYNQ_QSPI_CONFIG_OFFSET);
- if (assert) {
- /* Select the slave */
- config_reg &= ~ZYNQ_QSPI_CONFIG_SSCTRL_MASK;
- config_reg |= (((~(BIT(spi->chip_select))) <<
- ZYNQ_QSPI_SS_SHIFT) &
- ZYNQ_QSPI_CONFIG_SSCTRL_MASK);
- } else {
- config_reg |= ZYNQ_QSPI_CONFIG_SSCTRL_MASK;
+ /* Select the lower (CS0) or upper (CS1) memory */
+ if (ctlr->num_chipselect > 1) {
+ config_reg = zynq_qspi_read(xqspi, ZYNQ_QSPI_LINEAR_CFG_OFFSET);
+ if (!spi->chip_select)
+ config_reg &= ~ZYNQ_QSPI_LCFG_U_PAGE;
+ else
+ config_reg |= ZYNQ_QSPI_LCFG_U_PAGE;
+
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_LINEAR_CFG_OFFSET, config_reg);
}
+ /* Ground the line to assert the CS */
+ config_reg = zynq_qspi_read(xqspi, ZYNQ_QSPI_CONFIG_OFFSET);
+ if (assert)
+ config_reg &= ~ZYNQ_QSPI_CONFIG_PCS;
+ else
+ config_reg |= ZYNQ_QSPI_CONFIG_PCS;
+
zynq_qspi_write(xqspi, ZYNQ_QSPI_CONFIG_OFFSET, config_reg);
}
@@ -332,7 +343,7 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi)
* ----------------
* 111 - divide by 256
*/
- while ((baud_rate_val < ZYNQ_QSPI_BAUD_DIV_MAX) &&
+ while ((baud_rate_val < ZYNQ_QSPI_CONFIG_BAUD_DIV_MAX) &&
(clk_get_rate(xqspi->refclk) / (2 << baud_rate_val)) >
spi->max_speed_hz)
baud_rate_val++;
@@ -348,7 +359,7 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi)
config_reg |= ZYNQ_QSPI_CONFIG_CPOL_MASK;
config_reg &= ~ZYNQ_QSPI_CONFIG_BDRATE_MASK;
- config_reg |= (baud_rate_val << ZYNQ_QSPI_BAUD_DIV_SHIFT);
+ config_reg |= (baud_rate_val << ZYNQ_QSPI_CONFIG_BAUD_DIV_SHIFT);
zynq_qspi_write(xqspi, ZYNQ_QSPI_CONFIG_OFFSET, config_reg);
return 0;
@@ -365,10 +376,10 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi)
*/
static int zynq_qspi_setup_op(struct spi_device *spi)
{
- struct spi_controller *ctrl = spi->master;
- struct zynq_qspi *qspi = spi_controller_get_devdata(ctrl);
+ struct spi_controller *ctlr = spi->master;
+ struct zynq_qspi *qspi = spi_controller_get_devdata(ctlr);
- if (ctrl->busy)
+ if (ctlr->busy)
return -EBUSY;
clk_enable(qspi->refclk);
@@ -663,9 +674,6 @@ static int zynq_qspi_probe(struct platform_device *pdev)
goto clk_dis_pclk;
}
- /* QSPI controller initializations */
- zynq_qspi_init_hw(xqspi);
-
xqspi->irq = platform_get_irq(pdev, 0);
if (xqspi->irq <= 0) {
ret = -ENXIO;
@@ -681,10 +689,14 @@ static int zynq_qspi_probe(struct platform_device *pdev)
ret = of_property_read_u32(np, "num-cs",
&num_cs);
- if (ret < 0)
- ctlr->num_chipselect = ZYNQ_QSPI_DEFAULT_NUM_CS;
- else
+ if (ret < 0) {
+ ctlr->num_chipselect = 1;
+ } else if (num_cs > ZYNQ_QSPI_MAX_NUM_CS) {
+ dev_err(&pdev->dev, "only 2 chip selects are available\n");
+ goto remove_master;
+ } else {
ctlr->num_chipselect = num_cs;
+ }
ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD |
SPI_TX_DUAL | SPI_TX_QUAD;
@@ -692,6 +704,10 @@ static int zynq_qspi_probe(struct platform_device *pdev)
ctlr->setup = zynq_qspi_setup_op;
ctlr->max_speed_hz = clk_get_rate(xqspi->refclk) / 2;
ctlr->dev.of_node = np;
+
+ /* QSPI controller initializations */
+ zynq_qspi_init_hw(xqspi, ctlr->num_chipselect);
+
ret = devm_spi_register_controller(&pdev->dev, ctlr);
if (ret) {
dev_err(&pdev->dev, "spi_register_master failed\n");
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 9bb36c32cbf9..5e4c4532f7f3 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -92,7 +92,7 @@ static ssize_t driver_override_store(struct device *dev,
if (len) {
spi->driver_override = driver_override;
} else {
- /* Emptry string, disable driver override */
+ /* Empty string, disable driver override */
spi->driver_override = NULL;
kfree(driver_override);
}
@@ -469,7 +469,7 @@ static LIST_HEAD(board_list);
static LIST_HEAD(spi_controller_list);
/*
- * Used to protect add/del opertion for board_info list and
+ * Used to protect add/del operation for board_info list and
* spi_controller list, and their matching process
* also used to protect object of type struct idr
*/
@@ -775,6 +775,15 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n)
static void spi_set_cs(struct spi_device *spi, bool enable)
{
+ bool enable1 = enable;
+
+ if (!spi->controller->set_cs_timing) {
+ if (enable1)
+ spi_delay_exec(&spi->controller->cs_setup, NULL);
+ else
+ spi_delay_exec(&spi->controller->cs_hold, NULL);
+ }
+
if (spi->mode & SPI_CS_HIGH)
enable = !enable;
@@ -800,6 +809,11 @@ static void spi_set_cs(struct spi_device *spi, bool enable)
} else if (spi->controller->set_cs) {
spi->controller->set_cs(spi, !enable);
}
+
+ if (!spi->controller->set_cs_timing) {
+ if (!enable1)
+ spi_delay_exec(&spi->controller->cs_inactive, NULL);
+ }
}
#ifdef CONFIG_HAS_DMA
@@ -1106,42 +1120,79 @@ static void _spi_transfer_delay_ns(u32 ns)
}
}
-static void _spi_transfer_cs_change_delay(struct spi_message *msg,
- struct spi_transfer *xfer)
+int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer)
{
- u32 delay = xfer->cs_change_delay;
- u32 unit = xfer->cs_change_delay_unit;
+ u32 delay = _delay->value;
+ u32 unit = _delay->unit;
u32 hz;
- /* return early on "fast" mode - for everything but USECS */
- if (!delay && unit != SPI_DELAY_UNIT_USECS)
- return;
+ if (!delay)
+ return 0;
switch (unit) {
case SPI_DELAY_UNIT_USECS:
- /* for compatibility use default of 10us */
- if (!delay)
- delay = 10000;
- else
- delay *= 1000;
+ delay *= 1000;
break;
case SPI_DELAY_UNIT_NSECS: /* nothing to do here */
break;
case SPI_DELAY_UNIT_SCK:
+ /* clock cycles need to be obtained from spi_transfer */
+ if (!xfer)
+ return -EINVAL;
/* if there is no effective speed know, then approximate
* by underestimating with half the requested hz
*/
hz = xfer->effective_speed_hz ?: xfer->speed_hz / 2;
+ if (!hz)
+ return -EINVAL;
delay *= DIV_ROUND_UP(1000000000, hz);
break;
default:
+ return -EINVAL;
+ }
+
+ return delay;
+}
+EXPORT_SYMBOL_GPL(spi_delay_to_ns);
+
+int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer)
+{
+ int delay;
+
+ if (!_delay)
+ return -EINVAL;
+
+ delay = spi_delay_to_ns(_delay, xfer);
+ if (delay < 0)
+ return delay;
+
+ _spi_transfer_delay_ns(delay);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_delay_exec);
+
+static void _spi_transfer_cs_change_delay(struct spi_message *msg,
+ struct spi_transfer *xfer)
+{
+ u32 delay = xfer->cs_change_delay.value;
+ u32 unit = xfer->cs_change_delay.unit;
+ int ret;
+
+ /* return early on "fast" mode - for everything but USECS */
+ if (!delay) {
+ if (unit == SPI_DELAY_UNIT_USECS)
+ _spi_transfer_delay_ns(10000);
+ return;
+ }
+
+ ret = spi_delay_exec(&xfer->cs_change_delay, xfer);
+ if (ret) {
dev_err_once(&msg->spi->dev,
"Use of unsupported delay unit %i, using default of 10us\n",
- xfer->cs_change_delay_unit);
- delay = 10000;
+ unit);
+ _spi_transfer_delay_ns(10000);
}
- /* now sleep for the requested amount of time */
- _spi_transfer_delay_ns(delay);
}
/*
@@ -1212,8 +1263,7 @@ static int spi_transfer_one_message(struct spi_controller *ctlr,
if (msg->status != -EINPROGRESS)
goto out;
- if (xfer->delay_usecs)
- _spi_transfer_delay_ns(xfer->delay_usecs * 1000);
+ spi_transfer_delay_exec(xfer);
if (xfer->cs_change) {
if (list_is_last(&xfer->transfer_list,
@@ -1830,15 +1880,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
spi->mode |= SPI_3WIRE;
if (of_property_read_bool(nc, "spi-lsb-first"))
spi->mode |= SPI_LSB_FIRST;
-
- /*
- * For descriptors associated with the device, polarity inversion is
- * handled in the gpiolib, so all chip selects are "active high" in
- * the logical sense, the gpiolib will invert the line if need be.
- */
- if (ctlr->use_gpio_descriptors)
- spi->mode |= SPI_CS_HIGH;
- else if (of_property_read_bool(nc, "spi-cs-high"))
+ if (of_property_read_bool(nc, "spi-cs-high"))
spi->mode |= SPI_CS_HIGH;
/* Device DUAL/QUAD mode */
@@ -1902,6 +1944,15 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
}
spi->chip_select = value;
+ /*
+ * For descriptors associated with the device, polarity inversion is
+ * handled in the gpiolib, so all gpio chip selects are "active high"
+ * in the logical sense, the gpiolib will invert the line if need be.
+ */
+ if ((ctlr->use_gpio_descriptors) && ctlr->cs_gpiods &&
+ ctlr->cs_gpiods[spi->chip_select])
+ spi->mode |= SPI_CS_HIGH;
+
/* Device speed */
rc = of_property_read_u32(nc, "spi-max-frequency", &value);
if (rc) {
@@ -2990,10 +3041,11 @@ struct spi_replaced_transfers *spi_replace_transfers(
/* add to list */
list_add(&xfer->transfer_list, rxfer->replaced_after);
- /* clear cs_change and delay_usecs for all but the last */
+ /* clear cs_change and delay for all but the last */
if (i) {
xfer->cs_change = false;
xfer->delay_usecs = 0;
+ xfer->delay.value = 0;
}
}
@@ -3210,7 +3262,29 @@ int spi_setup(struct spi_device *spi)
if (spi->controller->setup)
status = spi->controller->setup(spi);
- spi_set_cs(spi, false);
+ if (spi->controller->auto_runtime_pm && spi->controller->set_cs) {
+ status = pm_runtime_get_sync(spi->controller->dev.parent);
+ if (status < 0) {
+ pm_runtime_put_noidle(spi->controller->dev.parent);
+ dev_err(&spi->controller->dev, "Failed to power device: %d\n",
+ status);
+ return status;
+ }
+
+ /*
+ * We do not want to return positive value from pm_runtime_get,
+ * there are many instances of devices calling spi_setup() and
+ * checking for a non-zero return value instead of a negative
+ * return value.
+ */
+ status = 0;
+
+ spi_set_cs(spi, false);
+ pm_runtime_mark_last_busy(spi->controller->dev.parent);
+ pm_runtime_put_autosuspend(spi->controller->dev.parent);
+ } else {
+ spi_set_cs(spi, false);
+ }
if (spi->rt && !spi->controller->rt) {
spi->controller->rt = true;
@@ -3233,18 +3307,71 @@ EXPORT_SYMBOL_GPL(spi_setup);
/**
* spi_set_cs_timing - configure CS setup, hold, and inactive delays
* @spi: the device that requires specific CS timing configuration
- * @setup: CS setup time in terms of clock count
- * @hold: CS hold time in terms of clock count
- * @inactive_dly: CS inactive delay between transfers in terms of clock count
+ * @setup: CS setup time specified via @spi_delay
+ * @hold: CS hold time specified via @spi_delay
+ * @inactive: CS inactive delay between transfers specified via @spi_delay
+ *
+ * Return: zero on success, else a negative error code.
*/
-void spi_set_cs_timing(struct spi_device *spi, u8 setup, u8 hold,
- u8 inactive_dly)
+int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup,
+ struct spi_delay *hold, struct spi_delay *inactive)
{
+ size_t len;
+
if (spi->controller->set_cs_timing)
- spi->controller->set_cs_timing(spi, setup, hold, inactive_dly);
+ return spi->controller->set_cs_timing(spi, setup, hold,
+ inactive);
+
+ if ((setup && setup->unit == SPI_DELAY_UNIT_SCK) ||
+ (hold && hold->unit == SPI_DELAY_UNIT_SCK) ||
+ (inactive && inactive->unit == SPI_DELAY_UNIT_SCK)) {
+ dev_err(&spi->dev,
+ "Clock-cycle delays for CS not supported in SW mode\n");
+ return -ENOTSUPP;
+ }
+
+ len = sizeof(struct spi_delay);
+
+ /* copy delays to controller */
+ if (setup)
+ memcpy(&spi->controller->cs_setup, setup, len);
+ else
+ memset(&spi->controller->cs_setup, 0, len);
+
+ if (hold)
+ memcpy(&spi->controller->cs_hold, hold, len);
+ else
+ memset(&spi->controller->cs_hold, 0, len);
+
+ if (inactive)
+ memcpy(&spi->controller->cs_inactive, inactive, len);
+ else
+ memset(&spi->controller->cs_inactive, 0, len);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(spi_set_cs_timing);
+static int _spi_xfer_word_delay_update(struct spi_transfer *xfer,
+ struct spi_device *spi)
+{
+ int delay1, delay2;
+
+ delay1 = spi_delay_to_ns(&xfer->word_delay, xfer);
+ if (delay1 < 0)
+ return delay1;
+
+ delay2 = spi_delay_to_ns(&spi->word_delay, xfer);
+ if (delay2 < 0)
+ return delay2;
+
+ if (delay1 < delay2)
+ memcpy(&xfer->word_delay, &spi->word_delay,
+ sizeof(xfer->word_delay));
+
+ return 0;
+}
+
static int __spi_validate(struct spi_device *spi, struct spi_message *message)
{
struct spi_controller *ctlr = spi->controller;
@@ -3380,8 +3507,8 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
return -EINVAL;
}
- if (xfer->word_delay_usecs < spi->word_delay_usecs)
- xfer->word_delay_usecs = spi->word_delay_usecs;
+ if (_spi_xfer_word_delay_update(xfer, spi))
+ return -EINVAL;
}
message->status = -EINPROGRESS;
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 255786f2e844..1e217e3e9486 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -265,9 +265,11 @@ static int spidev_message(struct spidev_data *spidev,
k_tmp->tx_nbits = u_tmp->tx_nbits;
k_tmp->rx_nbits = u_tmp->rx_nbits;
k_tmp->bits_per_word = u_tmp->bits_per_word;
- k_tmp->delay_usecs = u_tmp->delay_usecs;
+ k_tmp->delay.value = u_tmp->delay_usecs;
+ k_tmp->delay.unit = SPI_DELAY_UNIT_USECS;
k_tmp->speed_hz = u_tmp->speed_hz;
- k_tmp->word_delay_usecs = u_tmp->word_delay_usecs;
+ k_tmp->word_delay.value = u_tmp->word_delay_usecs;
+ k_tmp->word_delay.unit = SPI_DELAY_UNIT_USECS;
if (!k_tmp->speed_hz)
k_tmp->speed_hz = spidev->speed_hz;
#ifdef VERBOSE
@@ -627,6 +629,9 @@ static int spidev_release(struct inode *inode, struct file *filp)
if (dofree)
kfree(spidev);
}
+#ifdef CONFIG_SPI_SLAVE
+ spi_slave_abort(spidev->spi);
+#endif
mutex_unlock(&device_list_lock);
return 0;
diff --git a/include/linux/platform_data/spi-mt65xx.h b/include/linux/platform_data/spi-mt65xx.h
index f0e6d6483e62..65fd5ffd257c 100644
--- a/include/linux/platform_data/spi-mt65xx.h
+++ b/include/linux/platform_data/spi-mt65xx.h
@@ -11,7 +11,6 @@
/* Board specific platform_data */
struct mtk_chip_config {
- u32 cs_pol;
u32 sample_sel;
};
#endif
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index a5d1837e4f35..6facf27865f9 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -206,7 +206,7 @@ enum pxa_ssp_type {
};
struct ssp_device {
- struct platform_device *pdev;
+ struct device *dev;
struct list_head node;
struct clk *clk;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 27f6b046cf92..98fe8663033a 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -91,6 +91,22 @@ void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
SPI_STATISTICS_ADD_TO_FIELD(stats, field, 1)
/**
+ * struct spi_delay - SPI delay information
+ * @value: Value for the delay
+ * @unit: Unit for the delay
+ */
+struct spi_delay {
+#define SPI_DELAY_UNIT_USECS 0
+#define SPI_DELAY_UNIT_NSECS 1
+#define SPI_DELAY_UNIT_SCK 2
+ u16 value;
+ u8 unit;
+};
+
+extern int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer);
+extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer);
+
+/**
* struct spi_device - Controller side proxy for an SPI slave device
* @dev: Driver model representation of the device.
* @controller: SPI controller used with the device.
@@ -124,7 +140,7 @@ void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
* the spi_master.
* @cs_gpiod: gpio descriptor of the chipselect line (optional, NULL when
* not using a GPIO line)
- * @word_delay_usecs: microsecond delay to be inserted between consecutive
+ * @word_delay: delay to be inserted between consecutive
* words of a transfer
*
* @statistics: statistics for the spi_device
@@ -174,7 +190,7 @@ struct spi_device {
const char *driver_override;
int cs_gpio; /* LEGACY: chip select gpio */
struct gpio_desc *cs_gpiod; /* chip select gpio desc */
- uint8_t word_delay_usecs; /* inter-word delay */
+ struct spi_delay word_delay; /* inter-word delay */
/* the statistics */
struct spi_statistics statistics;
@@ -391,6 +407,11 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* controller has native support for memory like operations.
* @unprepare_message: undo any work done by prepare_message().
* @slave_abort: abort the ongoing transfer request on an SPI slave controller
+ * @cs_setup: delay to be introduced by the controller after CS is asserted
+ * @cs_hold: delay to be introduced by the controller before CS is deasserted
+ * @cs_inactive: delay to be introduced by the controller after CS is
+ * deasserted. If @cs_change_delay is used from @spi_transfer, then the
+ * two delays will be added up.
* @cs_gpios: LEGACY: array of GPIO descs to use as chip select lines; one per
* CS number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself). Use the cs_gpiods
@@ -509,8 +530,8 @@ struct spi_controller {
* to configure specific CS timing through spi_set_cs_timing() after
* spi_setup().
*/
- void (*set_cs_timing)(struct spi_device *spi, u8 setup_clk_cycles,
- u8 hold_clk_cycles, u8 inactive_clk_cycles);
+ int (*set_cs_timing)(struct spi_device *spi, struct spi_delay *setup,
+ struct spi_delay *hold, struct spi_delay *inactive);
/* bidirectional bulk transfers
*
@@ -594,6 +615,11 @@ struct spi_controller {
/* Optimized handlers for SPI memory-like operations. */
const struct spi_controller_mem_ops *mem_ops;
+ /* CS delays */
+ struct spi_delay cs_setup;
+ struct spi_delay cs_hold;
+ struct spi_delay cs_inactive;
+
/* gpio chip select */
int *cs_gpios;
struct gpio_desc **cs_gpiods;
@@ -763,13 +789,13 @@ extern void spi_res_release(struct spi_controller *ctlr,
* @cs_change: affects chipselect after this transfer completes
* @cs_change_delay: delay between cs deassert and assert when
* @cs_change is set and @spi_transfer is not the last in @spi_message
- * @cs_change_delay_unit: unit of cs_change_delay
+ * @delay: delay to be introduced after this transfer before
+ * (optionally) changing the chipselect status, then starting
+ * the next transfer or completing this @spi_message.
* @delay_usecs: microseconds to delay after this transfer before
* (optionally) changing the chipselect status, then starting
* the next transfer or completing this @spi_message.
- * @word_delay_usecs: microseconds to inter word delay after each word size
- * (set by bits_per_word) transmission.
- * @word_delay: clock cycles to inter word delay after each word size
+ * @word_delay: inter word delay to be introduced after each word size
* (set by bits_per_word) transmission.
* @effective_speed_hz: the effective SCK-speed that was used to
* transfer this transfer. Set to 0 if the spi bus driver does
@@ -883,15 +909,11 @@ struct spi_transfer {
#define SPI_NBITS_DUAL 0x02 /* 2bits transfer */
#define SPI_NBITS_QUAD 0x04 /* 4bits transfer */
u8 bits_per_word;
- u8 word_delay_usecs;
u16 delay_usecs;
- u16 cs_change_delay;
- u8 cs_change_delay_unit;
-#define SPI_DELAY_UNIT_USECS 0
-#define SPI_DELAY_UNIT_NSECS 1
-#define SPI_DELAY_UNIT_SCK 2
+ struct spi_delay delay;
+ struct spi_delay cs_change_delay;
+ struct spi_delay word_delay;
u32 speed_hz;
- u16 word_delay;
u32 effective_speed_hz;
@@ -996,6 +1018,20 @@ spi_transfer_del(struct spi_transfer *t)
list_del(&t->transfer_list);
}
+static inline int
+spi_transfer_delay_exec(struct spi_transfer *t)
+{
+ struct spi_delay d;
+
+ if (t->delay_usecs) {
+ d.value = t->delay_usecs;
+ d.unit = SPI_DELAY_UNIT_USECS;
+ return spi_delay_exec(&d, NULL);
+ }
+
+ return spi_delay_exec(&t->delay, t);
+}
+
/**
* spi_message_init_with_transfers - Initialize spi_message and append transfers
* @m: spi_message to be initialized
@@ -1043,7 +1079,10 @@ static inline void spi_message_free(struct spi_message *m)
kfree(m);
}
-extern void spi_set_cs_timing(struct spi_device *spi, u8 setup, u8 hold, u8 inactive_dly);
+extern int spi_set_cs_timing(struct spi_device *spi,
+ struct spi_delay *setup,
+ struct spi_delay *hold,
+ struct spi_delay *inactive);
extern int spi_setup(struct spi_device *spi);
extern int spi_async(struct spi_device *spi, struct spi_message *message);
diff --git a/sound/soc/pxa/mmp-sspa.c b/sound/soc/pxa/mmp-sspa.c
index e3e5425b5c62..e701637a9ae9 100644
--- a/sound/soc/pxa/mmp-sspa.c
+++ b/sound/soc/pxa/mmp-sspa.c
@@ -177,7 +177,7 @@ static int mmp_sspa_set_dai_fmt(struct snd_soc_dai *cpu_dai,
/* we can only change the settings if the port is not in use */
if ((mmp_sspa_read_reg(sspa, SSPA_TXSP) & SSPA_SP_S_EN) ||
(mmp_sspa_read_reg(sspa, SSPA_RXSP) & SSPA_SP_S_EN)) {
- dev_err(&sspa->pdev->dev,
+ dev_err(sspa->dev,
"can't change hardware dai format: stream is in use\n");
return -EINVAL;
}
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 5fdd1a24c232..6c5201431f6e 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -52,11 +52,11 @@ struct ssp_priv {
static void dump_registers(struct ssp_device *ssp)
{
- dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
+ dev_dbg(ssp->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1),
pxa_ssp_read_reg(ssp, SSTO));
- dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
+ dev_dbg(ssp->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR),
pxa_ssp_read_reg(ssp, SSACD));
}
@@ -223,7 +223,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
clk_id = PXA_SSP_CLK_EXT;
}
- dev_dbg(&ssp->pdev->dev,
+ dev_dbg(ssp->dev,
"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
cpu_dai->id, clk_id, freq);
@@ -316,7 +316,7 @@ static int pxa_ssp_set_pll(struct ssp_priv *priv, unsigned int freq)
ssacd |= (0x6 << 4);
- dev_dbg(&ssp->pdev->dev,
+ dev_dbg(ssp->dev,
"Using SSACDD %x to supply %uHz\n",
val, freq);
break;
@@ -687,7 +687,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
* - complain loudly and fail if they've not been set up yet.
*/
if ((sscr0 & SSCR0_MOD) && !ttsa) {
- dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n");
+ dev_err(ssp->dev, "No TDM timeslot configured\n");
return -EINVAL;
}