summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig.debug5
-rw-r--r--arch/arm/mach-netx/Kconfig22
-rw-r--r--arch/arm/mach-netx/Makefile13
-rw-r--r--arch/arm/mach-netx/Makefile.boot3
-rw-r--r--arch/arm/mach-netx/fb.c65
-rw-r--r--arch/arm/mach-netx/fb.h12
-rw-r--r--arch/arm/mach-netx/generic.c182
-rw-r--r--arch/arm/mach-netx/generic.h14
-rw-r--r--arch/arm/mach-netx/include/mach/hardware.h27
-rw-r--r--arch/arm/mach-netx/include/mach/irqs.h58
-rw-r--r--arch/arm/mach-netx/include/mach/netx-regs.h420
-rw-r--r--arch/arm/mach-netx/include/mach/pfifo.h42
-rw-r--r--arch/arm/mach-netx/include/mach/uncompress.h63
-rw-r--r--arch/arm/mach-netx/include/mach/xc.h30
-rw-r--r--arch/arm/mach-netx/nxdb500.c197
-rw-r--r--arch/arm/mach-netx/nxdkn.c90
-rw-r--r--arch/arm/mach-netx/nxeb500hmi.c174
-rw-r--r--arch/arm/mach-netx/pfifo.c56
-rw-r--r--arch/arm/mach-netx/time.c141
-rw-r--r--arch/arm/mach-netx/xc.c246
20 files changed, 0 insertions, 1860 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c929bea9a9ff..85710e078afb 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1535,7 +1535,6 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX7D_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_QCOM_UARTDM
- default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
@@ -1575,7 +1574,6 @@ config DEBUG_UART_8250
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
- default 0x00100a00 if DEBUG_NETX_UART
default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
default 0x01c28000 if DEBUG_SUNXI_UART0
default 0x01c28400 if DEBUG_SUNXI_UART1
@@ -1700,7 +1698,6 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
@@ -1717,7 +1714,6 @@ config DEBUG_UART_VIRT
default 0xc881f000 if DEBUG_RV1108_UART2
default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0
- default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
@@ -1822,7 +1818,6 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig
deleted file mode 100644
index 1e5d9c870784..000000000000
--- a/arch/arm/mach-netx/Kconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menu "NetX Implementations"
- depends on ARCH_NETX
-
-config MACH_NXDKN
- bool "Enable Hilscher nxdkn Eval Board support"
- help
- Board support for the Hilscher NetX Eval Board
-
-config MACH_NXDB500
- bool "Enable Hilscher nxdb500 Eval Board support"
- select ARM_AMBA
- help
- Board support for the Hilscher nxdb500 Eval Board
-
-config MACH_NXEB500HMI
- bool "Enable Hilscher nxeb500hmi Eval Board support"
- select ARM_AMBA
- help
- Board support for the Hilscher nxeb500hmi Eval Board
-
-endmenu
diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile
deleted file mode 100644
index 44ea83f7d9c2..000000000000
--- a/arch/arm/mach-netx/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y += time.o generic.o pfifo.o xc.o
-
-# Specific board support
-obj-$(CONFIG_MACH_NXDKN) += nxdkn.o
-obj-$(CONFIG_MACH_NXDB500) += nxdb500.o fb.o
-obj-$(CONFIG_MACH_NXEB500HMI) += nxeb500hmi.o fb.o
diff --git a/arch/arm/mach-netx/Makefile.boot b/arch/arm/mach-netx/Makefile.boot
deleted file mode 100644
index 2eb23c0cb6b0..000000000000
--- a/arch/arm/mach-netx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
- zreladdr-y += 0x80008000
-
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
deleted file mode 100644
index 2dc80db07390..000000000000
--- a/arch/arm/mach-netx/fb.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/fb.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/err.h>
-#include <linux/gfp.h>
-
-#include <asm/irq.h>
-
-#include <mach/netx-regs.h>
-#include <mach/hardware.h>
-
-static struct clcd_panel *netx_panel;
-
-void netx_clcd_enable(struct clcd_fb *fb)
-{
-}
-
-int netx_clcd_setup(struct clcd_fb *fb)
-{
- dma_addr_t dma;
-
- fb->panel = netx_panel;
-
- fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma,
- GFP_KERNEL);
- if (!fb->fb.screen_base) {
- printk(KERN_ERR "CLCD: unable to map framebuffer\n");
- return -ENOMEM;
- }
-
- fb->fb.fix.smem_start = dma;
- fb->fb.fix.smem_len = 1024*1024;
-
- return 0;
-}
-
-int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
- return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
- fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-void netx_clcd_remove(struct clcd_fb *fb)
-{
- dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
- fb->fb.fix.smem_start);
-}
-
-static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
-
-int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
-{
- netx_panel = panel;
- fb_device.dev.platform_data = board;
- return amba_device_register(&fb_device, &iomem_resource);
-}
diff --git a/arch/arm/mach-netx/fb.h b/arch/arm/mach-netx/fb.h
deleted file mode 100644
index 5cdc01fc3c86..000000000000
--- a/arch/arm/mach-netx/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/fb.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-void netx_clcd_enable(struct clcd_fb *fb);
-int netx_clcd_setup(struct clcd_fb *fb);
-int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma);
-void netx_clcd_remove(struct clcd_fb *fb);
-int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel);
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
deleted file mode 100644
index 88881fd45e9f..000000000000
--- a/arch/arm/mach-netx/generic.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/generic.c
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/reboot.h>
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <mach/netx-regs.h>
-#include <asm/mach/irq.h>
-
-static struct map_desc netx_io_desc[] __initdata = {
- {
- .virtual = NETX_IO_VIRT,
- .pfn = __phys_to_pfn(NETX_IO_PHYS),
- .length = NETX_IO_SIZE,
- .type = MT_DEVICE
- }
-};
-
-void __init netx_map_io(void)
-{
- iotable_init(netx_io_desc, ARRAY_SIZE(netx_io_desc));
-}
-
-static struct resource netx_rtc_resources[] = {
- [0] = {
- .start = 0x00101200,
- .end = 0x00101220,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device netx_rtc_device = {
- .name = "netx-rtc",
- .id = 0,
- .num_resources = ARRAY_SIZE(netx_rtc_resources),
- .resource = netx_rtc_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &netx_rtc_device,
-};
-
-#if 0
-#define DEBUG_IRQ(fmt...) printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...) while (0) {}
-#endif
-
-static void netx_hif_demux_handler(struct irq_desc *desc)
-{
- unsigned int irq = NETX_IRQ_HIF_CHAINED(0);
- unsigned int stat;
-
- stat = ((readl(NETX_DPMAS_INT_EN) &
- readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f;
-
- while (stat) {
- if (stat & 1) {
- DEBUG_IRQ("handling irq %d\n", irq);
- generic_handle_irq(irq);
- }
- irq++;
- stat >>= 1;
- }
-}
-
-static int
-netx_hif_irq_type(struct irq_data *d, unsigned int type)
-{
- unsigned int val, irq;
-
- val = readl(NETX_DPMAS_IF_CONF1);
-
- irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
-
- if (type & IRQ_TYPE_EDGE_RISING) {
- DEBUG_IRQ("rising edges\n");
- val |= (1 << 26) << irq;
- }
- if (type & IRQ_TYPE_EDGE_FALLING) {
- DEBUG_IRQ("falling edges\n");
- val &= ~((1 << 26) << irq);
- }
- if (type & IRQ_TYPE_LEVEL_LOW) {
- DEBUG_IRQ("low level\n");
- val &= ~((1 << 26) << irq);
- }
- if (type & IRQ_TYPE_LEVEL_HIGH) {
- DEBUG_IRQ("high level\n");
- val |= (1 << 26) << irq;
- }
-
- writel(val, NETX_DPMAS_IF_CONF1);
-
- return 0;
-}
-
-static void
-netx_hif_ack_irq(struct irq_data *d)
-{
- unsigned int val, irq;
-
- irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
- writel((1 << 24) << irq, NETX_DPMAS_INT_STAT);
-
- val = readl(NETX_DPMAS_INT_EN);
- val &= ~((1 << 24) << irq);
- writel(val, NETX_DPMAS_INT_EN);
-
- DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
-}
-
-static void
-netx_hif_mask_irq(struct irq_data *d)
-{
- unsigned int val, irq;
-
- irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
- val = readl(NETX_DPMAS_INT_EN);
- val &= ~((1 << 24) << irq);
- writel(val, NETX_DPMAS_INT_EN);
- DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
-}
-
-static void
-netx_hif_unmask_irq(struct irq_data *d)
-{
- unsigned int val, irq;
-
- irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
- val = readl(NETX_DPMAS_INT_EN);
- val |= (1 << 24) << irq;
- writel(val, NETX_DPMAS_INT_EN);
- DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
-}
-
-static struct irq_chip netx_hif_chip = {
- .irq_ack = netx_hif_ack_irq,
- .irq_mask = netx_hif_mask_irq,
- .irq_unmask = netx_hif_unmask_irq,
- .irq_set_type = netx_hif_irq_type,
-};
-
-void __init netx_init_irq(void)
-{
- int irq;
-
- vic_init(io_p2v(NETX_PA_VIC), NETX_IRQ_VIC_START, ~0, 0);
-
- for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
- irq_set_chip_and_handler(irq, &netx_hif_chip,
- handle_level_irq);
- irq_clear_status_flags(irq, IRQ_NOREQUEST);
- }
-
- writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN);
- irq_set_chained_handler(NETX_IRQ_HIF, netx_hif_demux_handler);
-}
-
-static int __init netx_init(void)
-{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(netx_init);
-
-void netx_restart(enum reboot_mode mode, const char *cmd)
-{
- writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
- NETX_SYSTEM_RES_CR);
-}
diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h
deleted file mode 100644
index 223e304574a5..000000000000
--- a/arch/arm/mach-netx/generic.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/generic.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/reboot.h>
-
-extern void __init netx_map_io(void);
-extern void __init netx_init_irq(void);
-extern void netx_restart(enum reboot_mode, const char *);
-
-extern void netx_timer_init(void);
diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h
deleted file mode 100644
index 84253993d1e0..000000000000
--- a/arch/arm/mach-netx/include/mach/hardware.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/hardware.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define NETX_IO_PHYS 0x00100000
-#define NETX_IO_VIRT 0xe0000000
-#define NETX_IO_SIZE 0x00100000
-
-#define SRAM_INTERNAL_PHYS_0 0x00000
-#define SRAM_INTERNAL_PHYS_1 0x08000
-#define SRAM_INTERNAL_PHYS_2 0x10000
-#define SRAM_INTERNAL_PHYS_3 0x18000
-#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
-
-#define XPEC_MEM_SIZE 0x4000
-#define XMAC_MEM_SIZE 0x1000
-#define SRAM_MEM_SIZE 0x8000
-
-#define io_p2v(x) IOMEM((x) - NETX_IO_PHYS + NETX_IO_VIRT)
-#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
-
-#endif
diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h
deleted file mode 100644
index 540c92104fe8..000000000000
--- a/arch/arm/mach-netx/include/mach/irqs.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/irqs.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#define NETX_IRQ_VIC_START 64
-#define NETX_IRQ_SOFTINT (NETX_IRQ_VIC_START + 0)
-#define NETX_IRQ_TIMER0 (NETX_IRQ_VIC_START + 1)
-#define NETX_IRQ_TIMER1 (NETX_IRQ_VIC_START + 2)
-#define NETX_IRQ_TIMER2 (NETX_IRQ_VIC_START + 3)
-#define NETX_IRQ_SYSTIME_NS (NETX_IRQ_VIC_START + 4)
-#define NETX_IRQ_SYSTIME_S (NETX_IRQ_VIC_START + 5)
-#define NETX_IRQ_GPIO_15 (NETX_IRQ_VIC_START + 6)
-#define NETX_IRQ_WATCHDOG (NETX_IRQ_VIC_START + 7)
-#define NETX_IRQ_UART0 (NETX_IRQ_VIC_START + 8)
-#define NETX_IRQ_UART1 (NETX_IRQ_VIC_START + 9)
-#define NETX_IRQ_UART2 (NETX_IRQ_VIC_START + 10)
-#define NETX_IRQ_USB (NETX_IRQ_VIC_START + 11)
-#define NETX_IRQ_SPI (NETX_IRQ_VIC_START + 12)
-#define NETX_IRQ_I2C (NETX_IRQ_VIC_START + 13)
-#define NETX_IRQ_LCD (NETX_IRQ_VIC_START + 14)
-#define NETX_IRQ_HIF (NETX_IRQ_VIC_START + 15)
-#define NETX_IRQ_GPIO_0_14 (NETX_IRQ_VIC_START + 16)
-#define NETX_IRQ_XPEC0 (NETX_IRQ_VIC_START + 17)
-#define NETX_IRQ_XPEC1 (NETX_IRQ_VIC_START + 18)
-#define NETX_IRQ_XPEC2 (NETX_IRQ_VIC_START + 19)
-#define NETX_IRQ_XPEC3 (NETX_IRQ_VIC_START + 20)
-#define NETX_IRQ_XPEC(no) (NETX_IRQ_VIC_START + 17 + (no))
-#define NETX_IRQ_MSYNC0 (NETX_IRQ_VIC_START + 21)
-#define NETX_IRQ_MSYNC1 (NETX_IRQ_VIC_START + 22)
-#define NETX_IRQ_MSYNC2 (NETX_IRQ_VIC_START + 23)
-#define NETX_IRQ_MSYNC3 (NETX_IRQ_VIC_START + 24)
-#define NETX_IRQ_IRQ_PHY (NETX_IRQ_VIC_START + 25)
-#define NETX_IRQ_ISO_AREA (NETX_IRQ_VIC_START + 26)
-/* int 27 is reserved */
-/* int 28 is reserved */
-#define NETX_IRQ_TIMER3 (NETX_IRQ_VIC_START + 29)
-#define NETX_IRQ_TIMER4 (NETX_IRQ_VIC_START + 30)
-/* int 31 is reserved */
-
-#define NETX_IRQS (NETX_IRQ_VIC_START + 32)
-
-/* for multiplexed irqs on gpio 0..14 */
-#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
-#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
-
-/* Host interface interrupts */
-#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x))
-#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0)
-#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1)
-#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2)
-#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3)
-#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4)
-#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4)
-
-#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
deleted file mode 100644
index 7c356a6ab80b..000000000000
--- a/arch/arm/mach-netx/include/mach/netx-regs.h
+++ /dev/null
@@ -1,420 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/netx-regs.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#ifndef __ASM_ARCH_NETX_REGS_H
-#define __ASM_ARCH_NETX_REGS_H
-
-/* offsets relative to the beginning of the io space */
-#define NETX_OFS_SYSTEM 0x00000
-#define NETX_OFS_MEMCR 0x00100
-#define NETX_OFS_DPMAS 0x03000
-#define NETX_OFS_GPIO 0x00800
-#define NETX_OFS_PIO 0x00900
-#define NETX_OFS_UART0 0x00a00
-#define NETX_OFS_UART1 0x00a40
-#define NETX_OFS_UART2 0x00a80
-#define NETX_OF_MIIMU 0x00b00
-#define NETX_OFS_SPI 0x00c00
-#define NETX_OFS_I2C 0x00d00
-#define NETX_OFS_SYSTIME 0x01100
-#define NETX_OFS_RTC 0x01200
-#define NETX_OFS_EXTBUS 0x03600
-#define NETX_OFS_LCD 0x04000
-#define NETX_OFS_USB 0x20000
-#define NETX_OFS_XMAC0 0x60000
-#define NETX_OFS_XMAC1 0x61000
-#define NETX_OFS_XMAC2 0x62000
-#define NETX_OFS_XMAC3 0x63000
-#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
-#define NETX_OFS_PFIFO 0x64000
-#define NETX_OFS_XPEC0 0x70000
-#define NETX_OFS_XPEC1 0x74000
-#define NETX_OFS_XPEC2 0x78000
-#define NETX_OFS_XPEC3 0x7c000
-#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
-#define NETX_OFS_VIC 0xff000
-
-/* physical addresses */
-#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM)
-#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR)
-#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS)
-#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO)
-#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO)
-#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0)
-#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1)
-#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2)
-#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU)
-#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI)
-#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C)
-#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME)
-#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC)
-#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS)
-#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD)
-#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB)
-#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0)
-#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1)
-#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2)
-#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3)
-#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
-#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO)
-#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0)
-#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1)
-#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2)
-#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3)
-#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
-#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC)
-
-/* virtual addresses */
-#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM)
-#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR)
-#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS)
-#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO)
-#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO)
-#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0)
-#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1)
-#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2)
-#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU)
-#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI)
-#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C)
-#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME)
-#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC)
-#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS)
-#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD)
-#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB)
-#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0)
-#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1)
-#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2)
-#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3)
-#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
-#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO)
-#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0)
-#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1)
-#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2)
-#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3)
-#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
-#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC)
-
-/*********************************
- * System functions *
- *********************************/
-
-/* Registers */
-#define NETX_SYSTEM_REG(ofs) IOMEM(NETX_VA_SYSTEM + (ofs))
-#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00)
-#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04)
-#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08)
-
-/* FIXME: Docs are not consistent */
-/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) */
-#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c)
-
-#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10)
-#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34)
-#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70)
-#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200)
-#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204)
-#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
-#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
-
-/* Bits */
-#define NETX_SYSTEM_RES_CR_RSTIN (1<<0)
-#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1)
-#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3)
-#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4)
-#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5)
-#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6)
-#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24)
-#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25)
-#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26)
-
-#define PHY_CONTROL_RESET (1<<31)
-#define PHY_CONTROL_SIM_BYP (1<<30)
-#define PHY_CONTROL_CLK_XLATIN (1<<29)
-#define PHY_CONTROL_PHY1_EN (1<<21)
-#define PHY_CONTROL_PHY1_NP_MSG_CODE
-#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17)
-#define PHY_CONTROL_PHY1_FIXMODE (1<<16)
-#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13)
-#define PHY_CONTROL_PHY0_EN (1<<12)
-#define PHY_CONTROL_PHY0_NP_MSG_CODE
-#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8)
-#define PHY_CONTROL_PHY0_FIXMODE (1<<7)
-#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4)
-#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
-
-#define PHY_MODE_10BASE_T_HALF 0
-#define PHY_MODE_10BASE_T_FULL 1
-#define PHY_MODE_100BASE_TX_FX_FULL 2
-#define PHY_MODE_100BASE_TX_FX_HALF 3
-#define PHY_MODE_100BASE_TX_HALF 4
-#define PHY_MODE_REPEATER 5
-#define PHY_MODE_POWER_DOWN 6
-#define PHY_MODE_ALL 7
-
-/* Bits */
-#define VECT_CNTL_ENABLE (1 << 5)
-
-/*******************************
- * GPIO and timer module *
- *******************************/
-
-/* Registers */
-#define NETX_GPIO_REG(ofs) IOMEM(NETX_VA_GPIO + (ofs))
-#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2))
-#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2))
-#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
-#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc)
-#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0)
-#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4)
-#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8)
-#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0)
-
-/* Bits */
-#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0)
-#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1)
-#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2)
-#define NETX_GPIO_CFG_INV (1<<2)
-#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5)
-#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5)
-
-#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0)
-#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1)
-#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2)
-#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3)
-#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4)
-#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5)
-#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6)
-#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
-
-#define GPIO_BIT(gpio) (1<<(gpio))
-#define COUNTER_BIT(counter) ((1<<16)<<(counter))
-
-/*******************************
- * PIO *
- *******************************/
-
-/* Registers */
-#define NETX_PIO_REG(ofs) IOMEM(NETX_VA_PIO + (ofs))
-#define NETX_PIO_INPIO NETX_PIO_REG(0x0)
-#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4)
-#define NETX_PIO_OEPIO NETX_PIO_REG(0x8)
-
-/*******************************
- * MII Unit *
- *******************************/
-
-/* Registers */
-#define NETX_MIIMU IOMEM(NETX_VA_MIIMU)
-
-/* Bits */
-#define MIIMU_SNRDY (1<<0)
-#define MIIMU_PREAMBLE (1<<1)
-#define MIIMU_OPMODE_WRITE (1<<2)
-#define MIIMU_MDC_PERIOD (1<<3)
-#define MIIMU_PHY_NRES (1<<4)
-#define MIIMU_RTA (1<<5)
-#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
-#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
-#define MIIMU_DATA(data) (((data) & 0xffff) << 16)
-
-/*******************************
- * xmac / xpec *
- *******************************/
-
-/* XPEC register offsets relative to NETX_VA_XPEC(no) */
-#define NETX_XPEC_R0_OFS 0x00
-#define NETX_XPEC_R1_OFS 0x04
-#define NETX_XPEC_R2_OFS 0x08
-#define NETX_XPEC_R3_OFS 0x0c
-#define NETX_XPEC_R4_OFS 0x10
-#define NETX_XPEC_R5_OFS 0x14
-#define NETX_XPEC_R6_OFS 0x18
-#define NETX_XPEC_R7_OFS 0x1c
-#define NETX_XPEC_RANGE01_OFS 0x20
-#define NETX_XPEC_RANGE23_OFS 0x24
-#define NETX_XPEC_RANGE45_OFS 0x28
-#define NETX_XPEC_RANGE67_OFS 0x2c
-#define NETX_XPEC_PC_OFS 0x48
-#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
-#define NETX_XPEC_IRQ_OFS 0x8c
-#define NETX_XPEC_SYSTIME_NS_OFS 0x90
-#define NETX_XPEC_FIFO_DATA_OFS 0x94
-#define NETX_XPEC_SYSTIME_S_OFS 0x98
-#define NETX_XPEC_ADC_OFS 0x9c
-#define NETX_XPEC_URX_COUNT_OFS 0x40
-#define NETX_XPEC_UTX_COUNT_OFS 0x44
-#define NETX_XPEC_PC_OFS 0x48
-#define NETX_XPEC_ZERO_OFS 0x4c
-#define NETX_XPEC_STATCFG_OFS 0x50
-#define NETX_XPEC_EC_MASKA_OFS 0x54
-#define NETX_XPEC_EC_MASKB_OFS 0x58
-#define NETX_XPEC_EC_MASK0_OFS 0x5c
-#define NETX_XPEC_EC_MASK8_OFS 0x7c
-#define NETX_XPEC_EC_MASK9_OFS 0x80
-#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100
-#define NETX_XPEC_RAM_START_OFS 0x2000
-
-/* Bits */
-#define XPU_HOLD_PC (1<<0)
-
-/* XMAC register offsets relative to NETX_VA_XMAC(no) */
-#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000
-#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff
-#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400
-#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff
-#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00
-#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04
-#define NETX_XMAC_STATUS_SHARED0_OFS 0x840
-#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844
-#define NETX_XMAC_STATUS_SHARED1_OFS 0x848
-#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c
-#define NETX_XMAC_STATUS_SHARED2_OFS 0x850
-#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854
-#define NETX_XMAC_STATUS_SHARED3_OFS 0x858
-#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c
-
-#define RPU_HOLD_PC (1<<15)
-#define TPU_HOLD_PC (1<<15)
-
-/*******************************
- * Pointer FIFO *
- *******************************/
-
-/* Registers */
-#define NETX_PFIFO_REG(ofs) IOMEM(NETX_VA_PFIFO + (ofs))
-#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
-#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
-#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100)
-#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104)
-#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108)
-#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c)
-#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110)
-#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
-#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2))
-
-
-/*******************************
- * Memory Controller *
- *******************************/
-
-/* Registers */
-#define NETX_MEMCR_REG(ofs) IOMEM(NETX_VA_MEMCR + (ofs))
-#define NETX_MEMCR_SRAM_CTRL(cs) NETX_MEMCR_REG(0x0 + 4 * (cs)) /* SRAM for CS 0..2 */
-#define NETX_MEMCR_SDRAM_CFG_CTRL NETX_MEMCR_REG(0x40)
-#define NETX_MEMCR_SDRAM_TIMING_CTRL NETX_MEMCR_REG(0x44)
-#define NETX_MEMCR_SDRAM_MODE NETX_MEMCR_REG(0x48)
-#define NETX_MEMCR_SDRAM_EXT_MODE NETX_MEMCR_REG(0x4c)
-#define NETX_MEMCR_PRIO_TIMESLOT_CTRL NETX_MEMCR_REG(0x80)
-#define NETX_MEMCR_PRIO_ACCESS_CTRL NETX_MEMCR_REG(0x84)
-
-/* Bits */
-#define NETX_MEMCR_SRAM_CTRL_WIDTHEXTMEM(x) (((x) & 0x3) << 24)
-#define NETX_MEMCR_SRAM_CTRL_WSPOSTPAUSEEXTMEM(x) (((x) & 0x3) << 16)
-#define NETX_MEMCR_SRAM_CTRL_WSPREPASEEXTMEM(x) (((x) & 0x3) << 8)
-#define NETX_MEMCR_SRAM_CTRL_WSEXTMEM(x) (((x) & 0x1f) << 0)
-
-
-/*******************************
- * Dual Port Memory *
- *******************************/
-
-/* Registers */
-#define NETX_DPMAS_REG(ofs) IOMEM(NETX_VA_DPMAS + (ofs))
-#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8)
-#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0)
-#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0)
-#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608)
-#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c)
-#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs))
-#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */
-#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624)
-#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628)
-#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */
-#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634)
-#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638)
-
-/* Bits */
-#define NETX_DPMAS_INT_EN_GLB_EN (1<<31)
-#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30)
-#define NETX_DPMAS_INT_EN_WDG (1<<29)
-#define NETX_DPMAS_INT_EN_PIO72 (1<<28)
-#define NETX_DPMAS_INT_EN_PIO47 (1<<27)
-#define NETX_DPMAS_INT_EN_PIO40 (1<<26)
-#define NETX_DPMAS_INT_EN_PIO36 (1<<25)
-#define NETX_DPMAS_INT_EN_PIO35 (1<<24)
-
-#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
-
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
-
-#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
-#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26)
-#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23)
-#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20)
-#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17)
-#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12)
-#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7)
-#define NETX_EXT_CONFIG_WAIT_POL (1<<6)
-#define NETX_EXT_CONFIG_WAIT_EN (1<<5)
-#define NETX_EXT_CONFIG_NRD_MODE (1<<4)
-#define NETX_EXT_CONFIG_DS_MODE (1<<3)
-#define NETX_EXT_CONFIG_NWR_MODE (1<<2)
-#define NETX_EXT_CONFIG_16BIT (1<<1)
-#define NETX_EXT_CONFIG_CS_ENABLE (1<<0)
-
-#define NETX_DPMAS_IO_MODE0_WRL (1<<13)
-#define NETX_DPMAS_IO_MODE0_WAIT (1<<14)
-#define NETX_DPMAS_IO_MODE0_READY (1<<15)
-#define NETX_DPMAS_IO_MODE0_CS0 (1<<19)
-#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
-
-#define NETX_DPMAS_IO_MODE1_CS2 (1<<15)
-#define NETX_DPMAS_IO_MODE1_CS1 (1<<16)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30)
-
-/*******************************
- * I2C *
- *******************************/
-#define NETX_I2C_REG(ofs) IOMEM(NETX_VA_I2C, (ofs))
-#define NETX_I2C_CTRL NETX_I2C_REG(0x0)
-#define NETX_I2C_DATA NETX_I2C_REG(0x4)
-
-#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/arch/arm/mach-netx/include/mach/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h
deleted file mode 100644
index de23180bc937..000000000000
--- a/arch/arm/mach-netx/include/mach/pfifo.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/pfifo.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-
-#ifndef ASM_ARCH_PFIFO_H
-#define ASM_ARCH_PFIFO_H
-
-static inline int pfifo_push(int no, unsigned int pointer)
-{
- writel(pointer, NETX_PFIFO_BASE(no));
- return 0;
-}
-
-static inline unsigned int pfifo_pop(int no)
-{
- return readl(NETX_PFIFO_BASE(no));
-}
-
-static inline int pfifo_fill_level(int no)
-{
-
- return readl(NETX_PFIFO_FILL_LEVEL(no));
-}
-
-static inline int pfifo_full(int no)
-{
- return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
-}
-
-static inline int pfifo_empty(int no)
-{
- return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
-}
-
-int pfifo_request(unsigned int pfifo_mask);
-void pfifo_free(unsigned int pfifo_mask);
-
-#endif /* ASM_ARCH_PFIFO_H */
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
deleted file mode 100644
index edc1ac997eab..000000000000
--- a/arch/arm/mach-netx/include/mach/uncompress.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/uncompress.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-#define REG(x) (*(volatile unsigned long *)(x))
-
-#define UART1_BASE 0x100a00
-#define UART2_BASE 0x100a80
-
-#define UART_DR 0x0
-
-#define UART_CR 0x14
-#define CR_UART_EN (1<<0)
-
-#define UART_FR 0x18
-#define FR_BUSY (1<<3)
-#define FR_TXFF (1<<5)
-
-static inline void putc(char c)
-{
- unsigned long base;
-
- if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
- base = UART1_BASE;
- else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
- base = UART2_BASE;
- else
- return;
-
- while (REG(base + UART_FR) & FR_TXFF);
- REG(base + UART_DR) = c;
-}
-
-static inline void flush(void)
-{
- unsigned long base;
-
- if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
- base = UART1_BASE;
- else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
- base = UART2_BASE;
- else
- return;
-
- while (REG(base + UART_FR) & FR_BUSY);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-netx/include/mach/xc.h b/arch/arm/mach-netx/include/mach/xc.h
deleted file mode 100644
index 465d5e250ab8..000000000000
--- a/arch/arm/mach-netx/include/mach/xc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/xc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#ifndef __ASM_ARCH_XC_H
-#define __ASM_ARCH_XC_H
-
-struct xc {
- int no;
- unsigned int type;
- unsigned int version;
- void __iomem *xpec_base;
- void __iomem *xmac_base;
- void __iomem *sram_base;
- int irq;
- struct device *dev;
-};
-
-int xc_reset(struct xc *x);
-int xc_stop(struct xc* x);
-int xc_start(struct xc *x);
-int xc_running(struct xc *x);
-int xc_request_firmware(struct xc* x);
-struct xc* request_xc(int xcno, struct device *dev);
-void free_xc(struct xc *x);
-
-#endif /* __ASM_ARCH_XC_H */
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
deleted file mode 100644
index ad5e6747b834..000000000000
--- a/arch/arm/mach-netx/nxdb500.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/nxdb500.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/netx-regs.h>
-#include <linux/platform_data/eth-netx.h>
-
-#include "generic.h"
-#include "fb.h"
-
-static struct clcd_panel qvga = {
- .mode = {
- .name = "QVGA",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 187617,
- .left_margin = 6,
- .right_margin = 26,
- .upper_margin = 0,
- .lower_margin = 6,
- .hsync_len = 6,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = 16,
- .cntl = CNTL_LCDTFT | CNTL_BGR,
- .bpp = 16,
- .grayscale = 0,
-};
-
-static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
- var->green.length = 5;
- var->green.msb_right = 0;
-
- return clcdfb_check(fb, var);
-}
-
-static int nxdb500_clcd_setup(struct clcd_fb *fb)
-{
- unsigned int val;
-
- fb->fb.var.green.length = 5;
- fb->fb.var.green.msb_right = 0;
-
- /* enable asic control */
- val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
- writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
-
- writel(3, NETX_SYSTEM_IOC_CR);
-
- val = readl(NETX_PIO_OUTPIO);
- writel(val | 1, NETX_PIO_OUTPIO);
-
- val = readl(NETX_PIO_OEPIO);
- writel(val | 1, NETX_PIO_OEPIO);
- return netx_clcd_setup(fb);
-}
-
-static struct clcd_board clcd_data = {
- .name = "netX",
- .check = nxdb500_check,
- .decode = clcdfb_decode,
- .enable = netx_clcd_enable,
- .setup = nxdb500_clcd_setup,
- .mmap = netx_clcd_mmap,
- .remove = netx_clcd_remove,
-};
-
-static struct netxeth_platform_data eth0_platform_data = {
- .xcno = 0,
-};
-
-static struct platform_device netx_eth0_device = {
- .name = "netx-eth",
- .id = 0,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth0_platform_data,
- }
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
- .xcno = 1,
-};
-
-static struct platform_device netx_eth1_device = {
- .name = "netx-eth",
- .id = 1,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth1_platform_data,
- }
-};
-
-static struct resource netx_uart0_resources[] = {
- [0] = {
- .start = 0x00100A00,
- .end = 0x00100A3F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART0),
- .end = (NETX_IRQ_UART0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart0_device = {
- .name = "netx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(netx_uart0_resources),
- .resource = netx_uart0_resources,
-};
-
-static struct resource netx_uart1_resources[] = {
- [0] = {
- .start = 0x00100A40,
- .end = 0x00100A7F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART1),
- .end = (NETX_IRQ_UART1),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart1_device = {
- .name = "netx-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(netx_uart1_resources),
- .resource = netx_uart1_resources,
-};
-
-static struct resource netx_uart2_resources[] = {
- [0] = {
- .start = 0x00100A80,
- .end = 0x00100ABF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART2),
- .end = (NETX_IRQ_UART2),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart2_device = {
- .name = "netx-uart",
- .id = 2,
- .num_resources = ARRAY_SIZE(netx_uart2_resources),
- .resource = netx_uart2_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &netx_eth0_device,
- &netx_eth1_device,
- &netx_uart0_device,
- &netx_uart1_device,
- &netx_uart2_device,
-};
-
-static void __init nxdb500_init(void)
-{
- netx_fb_init(&clcd_data, &qvga);
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXDB500, "Hilscher nxdb500")
- .atag_offset = 0x100,
- .map_io = netx_map_io,
- .init_irq = netx_init_irq,
- .init_time = netx_timer_init,
- .init_machine = nxdb500_init,
- .restart = netx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
deleted file mode 100644
index 917381559628..000000000000
--- a/arch/arm/mach-netx/nxdkn.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/nxdkn.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/netx-regs.h>
-#include <linux/platform_data/eth-netx.h>
-
-#include "generic.h"
-
-static struct netxeth_platform_data eth0_platform_data = {
- .xcno = 0,
-};
-
-static struct platform_device nxdkn_eth0_device = {
- .name = "netx-eth",
- .id = 0,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth0_platform_data,
- }
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
- .xcno = 1,
-};
-
-static struct platform_device nxdkn_eth1_device = {
- .name = "netx-eth",
- .id = 1,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth1_platform_data,
- }
-};
-
-static struct resource netx_uart0_resources[] = {
- [0] = {
- .start = 0x00100A00,
- .end = 0x00100A3F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART0),
- .end = (NETX_IRQ_UART0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart0_device = {
- .name = "netx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(netx_uart0_resources),
- .resource = netx_uart0_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &nxdkn_eth0_device,
- &nxdkn_eth1_device,
- &netx_uart0_device,
-};
-
-static void __init nxdkn_init(void)
-{
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXDKN, "Hilscher nxdkn")
- .atag_offset = 0x100,
- .map_io = netx_map_io,
- .init_irq = netx_init_irq,
- .init_time = netx_timer_init,
- .init_machine = nxdkn_init,
- .restart = netx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
deleted file mode 100644
index aa0d5b2ca712..000000000000
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/nxeb500hmi.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/netx-regs.h>
-#include <linux/platform_data/eth-netx.h>
-
-#include "generic.h"
-#include "fb.h"
-
-static struct clcd_panel qvga = {
- .mode = {
- .name = "QVGA",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 187617,
- .left_margin = 6,
- .right_margin = 26,
- .upper_margin = 0,
- .lower_margin = 6,
- .hsync_len = 6,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = 16,
- .cntl = CNTL_LCDTFT | CNTL_BGR,
- .bpp = 16,
- .grayscale = 0,
-};
-
-static inline int nxeb500hmi_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
- var->green.length = 5;
- var->green.msb_right = 0;
-
- return clcdfb_check(fb, var);
-}
-
-static int nxeb500hmi_clcd_setup(struct clcd_fb *fb)
-{
- unsigned int val;
-
- fb->fb.var.green.length = 5;
- fb->fb.var.green.msb_right = 0;
-
- /* enable asic control */
- val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
- writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
-
- writel(3, NETX_SYSTEM_IOC_CR);
-
- /* GPIO 14 is used for display enable on newer boards */
- writel(9, NETX_GPIO_CFG(14));
-
- val = readl(NETX_PIO_OUTPIO);
- writel(val | 1, NETX_PIO_OUTPIO);
-
- val = readl(NETX_PIO_OEPIO);
- writel(val | 1, NETX_PIO_OEPIO);
- return netx_clcd_setup(fb);
-}
-
-static struct clcd_board clcd_data = {
- .name = "netX",
- .check = nxeb500hmi_check,
- .decode = clcdfb_decode,
- .enable = netx_clcd_enable,
- .setup = nxeb500hmi_clcd_setup,
- .mmap = netx_clcd_mmap,
- .remove = netx_clcd_remove,
-};
-
-static struct netxeth_platform_data eth0_platform_data = {
- .xcno = 0,
-};
-
-static struct platform_device netx_eth0_device = {
- .name = "netx-eth",
- .id = 0,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth0_platform_data,
- }
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
- .xcno = 1,
-};
-
-static struct platform_device netx_eth1_device = {
- .name = "netx-eth",
- .id = 1,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth1_platform_data,
- }
-};
-
-static struct resource netx_cf_resources[] = {
- [0] = {
- .start = 0x20000000,
- .end = 0x25ffffff,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
- },
-};
-
-static struct platform_device netx_cf_device = {
- .name = "netx-cf",
- .id = 0,
- .resource = netx_cf_resources,
- .num_resources = ARRAY_SIZE(netx_cf_resources),
-};
-
-static struct resource netx_uart0_resources[] = {
- [0] = {
- .start = 0x00100A00,
- .end = 0x00100A3F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART0),
- .end = (NETX_IRQ_UART0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart0_device = {
- .name = "netx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(netx_uart0_resources),
- .resource = netx_uart0_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &netx_eth0_device,
- &netx_eth1_device,
- &netx_cf_device,
- &netx_uart0_device,
-};
-
-static void __init nxeb500hmi_init(void)
-{
- netx_fb_init(&clcd_data, &qvga);
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
- .atag_offset = 0x100,
- .map_io = netx_map_io,
- .init_irq = netx_init_irq,
- .init_time = netx_timer_init,
- .init_machine = nxeb500hmi_init,
- .restart = netx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
deleted file mode 100644
index 2e5cc777329f..000000000000
--- a/arch/arm/mach-netx/pfifo.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/pfifo.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/netx-regs.h>
-#include <mach/pfifo.h>
-
-static DEFINE_MUTEX(pfifo_lock);
-
-static unsigned int pfifo_used = 0;
-
-int pfifo_request(unsigned int pfifo_mask)
-{
- int err = 0;
- unsigned int val;
-
- mutex_lock(&pfifo_lock);
-
- if (pfifo_mask & pfifo_used) {
- err = -EBUSY;
- goto out;
- }
-
- pfifo_used |= pfifo_mask;
-
- val = readl(NETX_PFIFO_RESET);
- writel(val | pfifo_mask, NETX_PFIFO_RESET);
- writel(val, NETX_PFIFO_RESET);
-
-out:
- mutex_unlock(&pfifo_lock);
- return err;
-}
-
-void pfifo_free(unsigned int pfifo_mask)
-{
- mutex_lock(&pfifo_lock);
- pfifo_used &= ~pfifo_mask;
- mutex_unlock(&pfifo_lock);
-}
-
-EXPORT_SYMBOL(pfifo_push);
-EXPORT_SYMBOL(pfifo_pop);
-EXPORT_SYMBOL(pfifo_fill_level);
-EXPORT_SYMBOL(pfifo_empty);
-EXPORT_SYMBOL(pfifo_request);
-EXPORT_SYMBOL(pfifo_free);
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
deleted file mode 100644
index d9defa1ab605..000000000000
--- a/arch/arm/mach-netx/time.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/time.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/time.h>
-#include <mach/netx-regs.h>
-
-#define NETX_CLOCK_FREQ 100000000
-#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ)
-
-#define TIMER_CLOCKEVENT 0
-#define TIMER_CLOCKSOURCE 1
-
-static inline void timer_shutdown(struct clock_event_device *evt)
-{
- /* disable timer */
- writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
-}
-
-static int netx_shutdown(struct clock_event_device *evt)
-{
- timer_shutdown(evt);
-
- return 0;
-}
-
-static int netx_set_oneshot(struct clock_event_device *evt)
-{
- u32 tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
-
- timer_shutdown(evt);
- writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
- writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
-
- return 0;
-}
-
-static int netx_set_periodic(struct clock_event_device *evt)
-{
- u32 tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
- NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
-
- timer_shutdown(evt);
- writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
- writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
-
- return 0;
-}
-
-static int netx_set_next_event(unsigned long evt,
- struct clock_event_device *clk)
-{
- writel(0 - evt, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKEVENT));
- return 0;
-}
-
-static struct clock_event_device netx_clockevent = {
- .name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = netx_set_next_event,
- .set_state_shutdown = netx_shutdown,
- .set_state_periodic = netx_set_periodic,
- .set_state_oneshot = netx_set_oneshot,
- .tick_resume = netx_shutdown,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-netx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &netx_clockevent;
-
- /* acknowledge interrupt */
- writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction netx_timer_irq = {
- .name = "NetX Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = netx_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt
- */
-void __init netx_timer_init(void)
-{
- /* disable timer initially */
- writel(0, NETX_GPIO_COUNTER_CTRL(0));
-
- /* Reset the timer value to zero */
- writel(0, NETX_GPIO_COUNTER_CURRENT(0));
-
- writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0));
-
- /* acknowledge interrupt */
- writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
-
- /* Enable the interrupt in the specific timer
- * register and start timer
- */
- writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE);
- writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN,
- NETX_GPIO_COUNTER_CTRL(0));
-
- setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
-
- /* Setup timer one for clocksource */
- writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
- writel(0, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
- writel(0xffffffff, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKSOURCE));
-
- writel(NETX_GPIO_COUNTER_CTRL_RUN,
- NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
-
- clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
- "netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up);
-
- /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
- * Adding some safety ... */
- netx_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ,
- 0xa00, 0xfffffffe);
-}
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
deleted file mode 100644
index 885a618b2651..000000000000
--- a/arch/arm/mach-netx/xc.c
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/xc.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/netx-regs.h>
-
-#include <mach/xc.h>
-
-static DEFINE_MUTEX(xc_lock);
-
-static int xc_in_use = 0;
-
-struct fw_desc {
- unsigned int ofs;
- unsigned int size;
- unsigned int patch_ofs;
- unsigned int patch_entries;
-};
-
-struct fw_header {
- unsigned int magic;
- unsigned int type;
- unsigned int version;
- unsigned int reserved[5];
- struct fw_desc fw_desc[3];
-} __attribute__ ((packed));
-
-int xc_stop(struct xc *x)
-{
- writel(RPU_HOLD_PC, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
- writel(TPU_HOLD_PC, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
- writel(XPU_HOLD_PC, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
- return 0;
-}
-
-int xc_start(struct xc *x)
-{
- writel(0, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
- writel(0, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
- writel(0, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
- return 0;
-}
-
-int xc_running(struct xc *x)
-{
- return (readl(x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS) & RPU_HOLD_PC)
- || (readl(x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS) & TPU_HOLD_PC)
- || (readl(x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS) & XPU_HOLD_PC) ?
- 0 : 1;
-}
-
-int xc_reset(struct xc *x)
-{
- writel(0, x->xpec_base + NETX_XPEC_PC_OFS);
- return 0;
-}
-
-static int xc_check_ptr(struct xc *x, unsigned long adr, unsigned int size)
-{
- if (adr >= NETX_PA_XMAC(x->no) &&
- adr + size < NETX_PA_XMAC(x->no) + XMAC_MEM_SIZE)
- return 0;
-
- if (adr >= NETX_PA_XPEC(x->no) &&
- adr + size < NETX_PA_XPEC(x->no) + XPEC_MEM_SIZE)
- return 0;
-
- dev_err(x->dev, "Illegal pointer in firmware found. aborting\n");
-
- return -1;
-}
-
-static int xc_patch(struct xc *x, const void *patch, int count)
-{
- unsigned int val, adr;
- const unsigned int *data = patch;
-
- int i;
- for (i = 0; i < count; i++) {
- adr = *data++;
- val = *data++;
- if (xc_check_ptr(x, adr, 4) < 0)
- return -EINVAL;
-
- writel(val, (void __iomem *)io_p2v(adr));
- }
- return 0;
-}
-
-int xc_request_firmware(struct xc *x)
-{
- int ret;
- char name[16];
- const struct firmware *fw;
- struct fw_header *head;
- unsigned int size;
- int i;
- const void *src;
- unsigned long dst;
-
- sprintf(name, "xc%d.bin", x->no);
-
- ret = request_firmware(&fw, name, x->dev);
-
- if (ret < 0) {
- dev_err(x->dev, "request_firmware failed\n");
- return ret;
- }
-
- head = (struct fw_header *)fw->data;
- if (head->magic != 0x4e657458) {
- if (head->magic == 0x5874654e) {
- dev_err(x->dev,
- "firmware magic is 'XteN'. Endianness problems?\n");
- ret = -ENODEV;
- goto exit_release_firmware;
- }
- dev_err(x->dev, "unrecognized firmware magic 0x%08x\n",
- head->magic);
- ret = -ENODEV;
- goto exit_release_firmware;
- }
-
- x->type = head->type;
- x->version = head->version;
-
- ret = -EINVAL;
-
- for (i = 0; i < 3; i++) {
- src = fw->data + head->fw_desc[i].ofs;
- dst = *(unsigned int *)src;
- src += sizeof (unsigned int);
- size = head->fw_desc[i].size - sizeof (unsigned int);
-
- if (xc_check_ptr(x, dst, size))
- goto exit_release_firmware;
-
- memcpy((void *)io_p2v(dst), src, size);
-
- src = fw->data + head->fw_desc[i].patch_ofs;
- size = head->fw_desc[i].patch_entries;
- ret = xc_patch(x, src, size);
- if (ret < 0)
- goto exit_release_firmware;
- }
-
- ret = 0;
-
- exit_release_firmware:
- release_firmware(fw);
-
- return ret;
-}
-
-struct xc *request_xc(int xcno, struct device *dev)
-{
- struct xc *x = NULL;
-
- mutex_lock(&xc_lock);
-
- if (xcno > 3)
- goto exit;
- if (xc_in_use & (1 << xcno))
- goto exit;
-
- x = kmalloc(sizeof (struct xc), GFP_KERNEL);
- if (!x)
- goto exit;
-
- if (!request_mem_region
- (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(&dev->kobj)))
- goto exit_free;
-
- if (!request_mem_region
- (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(&dev->kobj)))
- goto exit_release_1;
-
- if (!request_mem_region
- (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(&dev->kobj)))
- goto exit_release_2;
-
- x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno));
- x->xmac_base = (void * __iomem)io_p2v(NETX_PA_XMAC(xcno));
- x->sram_base = ioremap(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
- if (!x->sram_base)
- goto exit_release_3;
-
- x->irq = NETX_IRQ_XPEC(xcno);
-
- x->no = xcno;
- x->dev = dev;
-
- xc_in_use |= (1 << xcno);
-
- goto exit;
-
- exit_release_3:
- release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
- exit_release_2:
- release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
- exit_release_1:
- release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
- exit_free:
- kfree(x);
- x = NULL;
- exit:
- mutex_unlock(&xc_lock);
- return x;
-}
-
-void free_xc(struct xc *x)
-{
- int xcno = x->no;
-
- mutex_lock(&xc_lock);
-
- iounmap(x->sram_base);
- release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
- release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
- release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
- xc_in_use &= ~(1 << x->no);
- kfree(x);
-
- mutex_unlock(&xc_lock);
-}
-
-EXPORT_SYMBOL(free_xc);
-EXPORT_SYMBOL(request_xc);
-EXPORT_SYMBOL(xc_request_firmware);
-EXPORT_SYMBOL(xc_reset);
-EXPORT_SYMBOL(xc_running);
-EXPORT_SYMBOL(xc_start);
-EXPORT_SYMBOL(xc_stop);