diff options
| -rw-r--r-- | drivers/spi/spi.c | 92 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 21 | ||||
| -rw-r--r-- | include/trace/events/spi.h | 42 |
3 files changed, 153 insertions, 2 deletions
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 8a30c6b66a64..85c18d8a86b3 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -526,6 +526,95 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n) /*-------------------------------------------------------------------------*/ +static void spi_set_cs(struct spi_device *spi, bool enable) +{ + if (spi->mode & SPI_CS_HIGH) + enable = !enable; + + if (spi->cs_gpio >= 0) + gpio_set_value(spi->cs_gpio, !enable); + else if (spi->master->set_cs) + spi->master->set_cs(spi, !enable); +} + +/* + * spi_transfer_one_message - Default implementation of transfer_one_message() + * + * This is a standard implementation of transfer_one_message() for + * drivers which impelment a transfer_one() operation. It provides + * standard handling of delays and chip select management. + */ +static int spi_transfer_one_message(struct spi_master *master, + struct spi_message *msg) +{ + struct spi_transfer *xfer; + bool cur_cs = true; + bool keep_cs = false; + int ret = 0; + + spi_set_cs(msg->spi, true); + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + trace_spi_transfer_start(msg, xfer); + + INIT_COMPLETION(master->xfer_completion); + + ret = master->transfer_one(master, msg->spi, xfer); + if (ret < 0) { + dev_err(&msg->spi->dev, + "SPI transfer failed: %d\n", ret); + goto out; + } + + if (ret > 0) + wait_for_completion(&master->xfer_completion); + + trace_spi_transfer_stop(msg, xfer); + + if (msg->status != -EINPROGRESS) + goto out; + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + if (xfer->cs_change) { + if (list_is_last(&xfer->transfer_list, + &msg->transfers)) { + keep_cs = true; + } else { + cur_cs = !cur_cs; + spi_set_cs(msg->spi, cur_cs); + } + } + + msg->actual_length += xfer->len; + } + +out: + if (ret != 0 || !keep_cs) + spi_set_cs(msg->spi, false); + + if (msg->status == -EINPROGRESS) + msg->status = ret; + + spi_finalize_current_message(master); + + return ret; +} + +/** + * spi_finalize_current_transfer - report completion of a transfer + * + * Called by SPI drivers using the core transfer_one_message() + * implementation to notify it that the current interrupt driven + * transfer has finised and the next one may be scheduled. + */ +void spi_finalize_current_transfer(struct spi_master *master) +{ + complete(&master->xfer_completion); +} +EXPORT_SYMBOL_GPL(spi_finalize_current_transfer); + /** * spi_pump_messages - kthread work function which processes spi message queue * @work: pointer to kthread work struct contained in the master struct @@ -836,6 +925,8 @@ static int spi_master_initialize_queue(struct spi_master *master) master->queued = true; master->transfer = spi_queued_transfer; + if (!master->transfer_one_message) + master->transfer_one_message = spi_transfer_one_message; /* Initialize and start queue */ ret = spi_init_queue(master); @@ -1242,6 +1333,7 @@ int spi_register_master(struct spi_master *master) spin_lock_init(&master->bus_lock_spinlock); mutex_init(&master->bus_lock_mutex); master->bus_lock_flag = 0; + init_completion(&master->xfer_completion); /* register the device, then userspace will see it. * registration fails if the bus ID is in use. diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 000b50bee6c0..da371ab5ebeb 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -23,6 +23,7 @@ #include <linux/mod_devicetable.h> #include <linux/slab.h> #include <linux/kthread.h> +#include <linux/completion.h> /* * INTERFACES between SPI master-side drivers and SPI infrastructure. @@ -150,8 +151,7 @@ static inline void *spi_get_drvdata(struct spi_device *spi) } struct spi_message; - - +struct spi_transfer; /** * struct spi_driver - Host side "protocol" driver @@ -259,6 +259,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cur_msg: the currently in-flight message * @cur_msg_prepared: spi_prepare_message was called for the currently * in-flight message + * @xfer_completion: used by core tranfer_one_message() * @busy: message pump is busy * @running: message pump is running * @rt: whether this queue is set to run as a realtime task @@ -276,9 +277,15 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @unprepare_transfer_hardware: there are currently no more messages on the * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call + * @set_cs: assert or deassert chip select, true to assert. May be called + * from interrupt context. * @prepare_message: set up the controller to transfer a single message, * for example doing DMA mapping. Called from threaded * context. + * @transfer_one: transfer a single spi_transfer. When the + * driver is finished with this transfer it must call + * spi_finalize_current_transfer() so the subsystem can issue + * the next transfer * @unprepare_message: undo any work done by prepare_message(). * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that @@ -395,6 +402,7 @@ struct spi_master { bool rt; bool auto_runtime_pm; bool cur_msg_prepared; + struct completion xfer_completion; int (*prepare_transfer_hardware)(struct spi_master *master); int (*transfer_one_message)(struct spi_master *master, @@ -405,6 +413,14 @@ struct spi_master { int (*unprepare_message)(struct spi_master *master, struct spi_message *message); + /* + * These hooks are for drivers that use a generic implementation + * of transfer_one_message() provied by the core. + */ + void (*set_cs)(struct spi_device *spi, bool enable); + int (*transfer_one)(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *transfer); + /* gpio chip select */ int *cs_gpios; }; @@ -439,6 +455,7 @@ extern int spi_master_resume(struct spi_master *master); /* Calls the driver make to interact with the message queue */ extern struct spi_message *spi_get_next_queued_message(struct spi_master *master); extern void spi_finalize_current_message(struct spi_master *master); +extern void spi_finalize_current_transfer(struct spi_master *master); /* the spi driver core manages memory for the spi_master classdev */ extern struct spi_master * diff --git a/include/trace/events/spi.h b/include/trace/events/spi.h index 5e77e21f885a..7e02c983bbe2 100644 --- a/include/trace/events/spi.h +++ b/include/trace/events/spi.h @@ -108,6 +108,48 @@ TRACE_EVENT(spi_message_done, (unsigned)__entry->actual, (unsigned)__entry->frame) ); +DECLARE_EVENT_CLASS(spi_transfer, + + TP_PROTO(struct spi_message *msg, struct spi_transfer *xfer), + + TP_ARGS(msg, xfer), + + TP_STRUCT__entry( + __field( int, bus_num ) + __field( int, chip_select ) + __field( struct spi_transfer *, xfer ) + __field( int, len ) + ), + + TP_fast_assign( + __entry->bus_num = msg->spi->master->bus_num; + __entry->chip_select = msg->spi->chip_select; + __entry->xfer = xfer; + __entry->len = xfer->len; + ), + + TP_printk("spi%d.%d %p len=%d", (int)__entry->bus_num, + (int)__entry->chip_select, + (struct spi_message *)__entry->xfer, + (int)__entry->len) +); + +DEFINE_EVENT(spi_transfer, spi_transfer_start, + + TP_PROTO(struct spi_message *msg, struct spi_transfer *xfer), + + TP_ARGS(msg, xfer) + +); + +DEFINE_EVENT(spi_transfer, spi_transfer_stop, + + TP_PROTO(struct spi_message *msg, struct spi_transfer *xfer), + + TP_ARGS(msg, xfer) + +); + #endif /* _TRACE_POWER_H */ /* This part must be outside protection */ |