summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/DMA-API-HOWTO.txt121
-rw-r--r--Documentation/DMA-API.txt29
-rw-r--r--arch/arc/Kconfig3
-rw-r--r--arch/arc/include/asm/Kbuild1
-rw-r--r--arch/arc/include/asm/dma-mapping.h13
-rw-r--r--arch/arm/Kconfig5
-rw-r--r--arch/arm/include/asm/dma-mapping.h9
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c12
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c3
-rw-r--r--arch/arm/mm/dma-mapping.c2
-rw-r--r--arch/arm64/Kconfig4
-rw-r--r--arch/arm64/include/asm/dma-mapping.h9
-rw-r--r--arch/csky/Kconfig2
-rw-r--r--arch/mips/Kconfig2
-rw-r--r--arch/mips/include/asm/dma-mapping.h10
-rw-r--r--arch/mips/mm/dma-noncoherent.c8
-rw-r--r--arch/powerpc/Kconfig1
-rw-r--r--arch/riscv/Kconfig1
-rw-r--r--arch/sh/Kconfig2
-rw-r--r--arch/sh/boards/mach-ap325rxa/setup.c5
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c6
-rw-r--r--arch/sh/boards/mach-kfr2r09/setup.c5
-rw-r--r--arch/sh/boards/mach-migor/setup.c5
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c6
-rw-r--r--arch/sh/drivers/pci/fixups-dreamcast.c3
-rw-r--r--arch/sparc/kernel/iommu.c13
-rw-r--r--arch/sparc/kernel/kernel.h6
-rw-r--r--arch/sparc/kernel/pci.c46
-rw-r--r--arch/sparc/kernel/pci_sun4v.c18
-rw-r--r--arch/unicore32/Kconfig1
-rw-r--r--arch/x86/Kconfig1
-rw-r--r--arch/xtensa/Kconfig1
-rw-r--r--drivers/base/Kconfig77
-rw-r--r--drivers/media/common/videobuf2/videobuf2-dma-contig.c41
-rw-r--r--drivers/mfd/Kconfig3
-rw-r--r--drivers/of/Kconfig6
-rw-r--r--drivers/parisc/ccio-dma.c4
-rw-r--r--drivers/usb/host/ohci-sm501.c3
-rw-r--r--drivers/usb/host/ohci-tmio.c2
-rw-r--r--include/linux/device.h2
-rw-r--r--include/linux/dma-mapping.h61
-rw-r--r--kernel/dma/Kconfig121
-rw-r--r--kernel/dma/Makefile2
-rw-r--r--kernel/dma/coherent.c50
-rw-r--r--kernel/dma/debug.c108
-rw-r--r--kernel/dma/direct.c14
-rw-r--r--lib/Kconfig.debug36
47 files changed, 341 insertions, 542 deletions
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index f0cc3f772265..1a721d0f35c8 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -146,114 +146,75 @@ What about block I/O and networking buffers? The block I/O and
networking subsystems make sure that the buffers they use are valid
for you to DMA from/to.
-DMA addressing limitations
+DMA addressing capabilities
==========================
-Does your device have any DMA addressing limitations? For example, is
-your device only capable of driving the low order 24-bits of address?
-If so, you need to inform the kernel of this fact.
+By default, the kernel assumes that your device can address 32-bits of DMA
+addressing. For a 64-bit capable device, this needs to be increased, and for
+a device with limitations, it needs to be decreased.
-By default, the kernel assumes that your device can address the full
-32-bits. For a 64-bit capable device, this needs to be increased.
-And for a device with limitations, as discussed in the previous
-paragraph, it needs to be decreased.
+Special note about PCI: PCI-X specification requires PCI-X devices to support
+64-bit addressing (DAC) for all transactions. And at least one platform (SGI
+SN2) requires 64-bit consistent allocations to operate correctly when the IO
+bus is in PCI-X mode.
-Special note about PCI: PCI-X specification requires PCI-X devices to
-support 64-bit addressing (DAC) for all transactions. And at least
-one platform (SGI SN2) requires 64-bit consistent allocations to
-operate correctly when the IO bus is in PCI-X mode.
+For correct operation, you must set the DMA mask to inform the kernel about
+your devices DMA addressing capabilities.
-For correct operation, you must interrogate the kernel in your device
-probe routine to see if the DMA controller on the machine can properly
-support the DMA addressing limitation your device has. It is good
-style to do this even if your device holds the default setting,
-because this shows that you did think about these issues wrt. your
-device.
-
-The query is performed via a call to dma_set_mask_and_coherent()::
+This is performed via a call to dma_set_mask_and_coherent()::
int dma_set_mask_and_coherent(struct device *dev, u64 mask);
-which will query the mask for both streaming and coherent APIs together.
-If you have some special requirements, then the following two separate
-queries can be used instead:
+which will set the mask for both streaming and coherent APIs together. If you
+have some special requirements, then the following two separate calls can be
+used instead:
- The query for streaming mappings is performed via a call to
+ The setup for streaming mappings is performed via a call to
dma_set_mask()::
int dma_set_mask(struct device *dev, u64 mask);
- The query for consistent allocations is performed via a call
+ The setup for consistent allocations is performed via a call
to dma_set_coherent_mask()::
int dma_set_coherent_mask(struct device *dev, u64 mask);
-Here, dev is a pointer to the device struct of your device, and mask
-is a bit mask describing which bits of an address your device
-supports. It returns zero if your card can perform DMA properly on
-the machine given the address mask you provided. In general, the
-device struct of your device is embedded in the bus-specific device
-struct of your device. For example, &pdev->dev is a pointer to the
-device struct of a PCI device (pdev is a pointer to the PCI device
-struct of your device).
+Here, dev is a pointer to the device struct of your device, and mask is a bit
+mask describing which bits of an address your device supports. Often the
+device struct of your device is embedded in the bus-specific device struct of
+your device. For example, &pdev->dev is a pointer to the device struct of a
+PCI device (pdev is a pointer to the PCI device struct of your device).
-If it returns non-zero, your device cannot perform DMA properly on
-this platform, and attempting to do so will result in undefined
-behavior. You must either use a different mask, or not use DMA.
+These calls usually return zero to indicated your device can perform DMA
+properly on the machine given the address mask you provided, but they might
+return an error if the mask is too small to be supportable on the given
+system. If it returns non-zero, your device cannot perform DMA properly on
+this platform, and attempting to do so will result in undefined behavior.
+You must not use DMA on this device unless the dma_set_mask family of
+functions has returned success.
-This means that in the failure case, you have three options:
+This means that in the failure case, you have two options:
-1) Use another DMA mask, if possible (see below).
-2) Use some non-DMA mode for data transfer, if possible.
-3) Ignore this device and do not initialize it.
+1) Use some non-DMA mode for data transfer, if possible.
+2) Ignore this device and do not initialize it.
-It is recommended that your driver print a kernel KERN_WARNING message
-when you end up performing either #2 or #3. In this manner, if a user
-of your driver reports that performance is bad or that the device is not
-even detected, you can ask them for the kernel messages to find out
-exactly why.
+It is recommended that your driver print a kernel KERN_WARNING message when
+setting the DMA mask fails. In this manner, if a user of your driver reports
+that performance is bad or that the device is not even detected, you can ask
+them for the kernel messages to find out exactly why.
-The standard 32-bit addressing device would do something like this::
+The standard 64-bit addressing device would do something like this::
- if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
+ if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) {
dev_warn(dev, "mydev: No suitable DMA available\n");
goto ignore_this_device;
}
-Another common scenario is a 64-bit capable device. The approach here
-is to try for 64-bit addressing, but back down to a 32-bit mask that
-should not fail. The kernel may fail the 64-bit mask not because the
-platform is not capable of 64-bit addressing. Rather, it may fail in
-this case simply because 32-bit addressing is done more efficiently
-than 64-bit addressing. For example, Sparc64 PCI SAC addressing is
-more efficient than DAC addressing.
-
-Here is how you would handle a 64-bit capable device which can drive
-all 64-bits when accessing streaming DMA::
-
- int using_dac;
+If the device only supports 32-bit addressing for descriptors in the
+coherent allocations, but supports full 64-bits for streaming mappings
+it would look like this:
- if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
- using_dac = 1;
- } else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
- using_dac = 0;
- } else {
- dev_warn(dev, "mydev: No suitable DMA available\n");
- goto ignore_this_device;
- }
-
-If a card is capable of using 64-bit consistent allocations as well,
-the case would look like this::
-
- int using_dac, consistent_using_dac;
-
- if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) {
- using_dac = 1;
- consistent_using_dac = 1;
- } else if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
- using_dac = 0;
- consistent_using_dac = 0;
- } else {
+ if (dma_set_mask(dev, DMA_BIT_MASK(64))) {
dev_warn(dev, "mydev: No suitable DMA available\n");
goto ignore_this_device;
}
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 607c1e75e5aa..586643642910 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -566,8 +566,7 @@ boundaries when doing this.
int
dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
- dma_addr_t device_addr, size_t size, int
- flags)
+ dma_addr_t device_addr, size_t size);
Declare region of memory to be handed out by dma_alloc_coherent() when
it's asked for coherent memory for this device.
@@ -581,12 +580,6 @@ dma_addr_t in dma_alloc_coherent()).
size is the size of the area (must be multiples of PAGE_SIZE).
-flags can be ORed together and are:
-
-- DMA_MEMORY_EXCLUSIVE - only allocate memory from the declared regions.
- Do not allow dma_alloc_coherent() to fall back to system memory when
- it's out of memory in the declared region.
-
As a simplification for the platforms, only *one* such region of
memory may be declared per device.
@@ -605,23 +598,6 @@ unconditionally having removed all the required structures. It is the
driver's job to ensure that no parts of this memory region are
currently in use.
-::
-
- void *
- dma_mark_declared_memory_occupied(struct device *dev,
- dma_addr_t device_addr, size_t size)
-
-This is used to occupy specific regions of the declared space
-(dma_alloc_coherent() will hand out the first free region it finds).
-
-device_addr is the *device* address of the region requested.
-
-size is the size (and should be a page-sized multiple).
-
-The return value will be either a pointer to the processor virtual
-address of the memory, or an error (via PTR_ERR()) if any part of the
-region is occupied.
-
Part III - Debug drivers use of the DMA-API
-------------------------------------------
@@ -696,6 +672,9 @@ dma-api/disabled This read-only file contains the character 'Y'
happen when it runs out of memory or if it was
disabled at boot time
+dma-api/dump This read-only file contains current DMA
+ mappings.
+
dma-api/error_count This file is read-only and shows the total
numbers of errors found.
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 2061b652d9c3..df55672c59e6 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -11,6 +11,7 @@ config ARC
select ARC_TIMERS
select ARCH_HAS_DMA_COHERENT_TO_PFN
select ARCH_HAS_PTE_SPECIAL
+ select ARCH_HAS_SETUP_DMA_OPS
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
@@ -31,7 +32,6 @@ config ARC
select HAVE_ARCH_TRACEHOOK
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_FUTEX_CMPXCHG if FUTEX
- select HAVE_GENERIC_DMA_COHERENT
select HAVE_IOREMAP_PROT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZMA
@@ -45,7 +45,6 @@ config ARC
select MODULES_USE_ELF_RELA
select OF
select OF_EARLY_FLATTREE
- select OF_RESERVED_MEM
select PCI_SYSCALL if PCI
select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index caa270261521..b41f8881ecc8 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -3,6 +3,7 @@ generic-y += bugs.h
generic-y += compat.h
generic-y += device.h
generic-y += div64.h
+generic-y += dma-mapping.h
generic-y += emergency-restart.h
generic-y += extable.h
generic-y += ftrace.h
diff --git a/arch/arc/include/asm/dma-mapping.h b/arch/arc/include/asm/dma-mapping.h
deleted file mode 100644
index c946c0a83e76..000000000000
--- a/arch/arc/include/asm/dma-mapping.h
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// (C) 2018 Synopsys, Inc. (www.synopsys.com)
-
-#ifndef ASM_ARC_DMA_MAPPING_H
-#define ASM_ARC_DMA_MAPPING_H
-
-#include <asm-generic/dma-mapping.h>
-
-void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
- const struct iommu_ops *iommu, bool coherent);
-#define arch_setup_dma_ops arch_setup_dma_ops
-
-#endif
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e8a4d3ffb6eb..5085a1eab9fc 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -13,9 +13,11 @@ config ARM
select ARCH_HAS_MEMBARRIER_SYNC_CORE
select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
select ARCH_HAS_PHYS_TO_DMA
+ select ARCH_HAS_SETUP_DMA_OPS
select ARCH_HAS_SET_MEMORY
select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
select ARCH_HAS_STRICT_MODULE_RWX if MMU
+ select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_HAS_GCOV_PROFILE_ALL
@@ -31,6 +33,7 @@ config ARM
select CLONE_BACKWARDS
select CPU_PM if SUSPEND || CPU_IDLE
select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select DMA_DECLARE_COHERENT
select DMA_REMAP if MMU
select EDAC_SUPPORT
select EDAC_ATOMIC_SCRUB
@@ -73,7 +76,6 @@ config ARM
select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL
select HAVE_FUNCTION_TRACER if !XIP_KERNEL
select HAVE_GCC_PLUGINS
- select HAVE_GENERIC_DMA_COHERENT
select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
select HAVE_IDE if PCI || ISA || PCMCIA
select HAVE_IRQ_TIME_ACCOUNTING
@@ -102,7 +104,6 @@ config ARM
select MODULES_USE_ELF_REL
select NEED_DMA_MAP_STATE
select OF_EARLY_FLATTREE if OF
- select OF_RESERVED_MEM if OF
select OLD_SIGACTION
select OLD_SIGSUSPEND3
select PCI_SYSCALL if PCI
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 31d3b96f0f4b..03ba90ffc0f8 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -96,15 +96,6 @@ static inline unsigned long dma_max_pfn(struct device *dev)
}
#define dma_max_pfn(dev) dma_max_pfn(dev)
-#define arch_setup_dma_ops arch_setup_dma_ops
-extern void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
- const struct iommu_ops *iommu, bool coherent);
-
-#ifdef CONFIG_MMU
-#define arch_teardown_dma_ops arch_teardown_dma_ops
-extern void arch_teardown_dma_ops(struct device *dev);
-#endif
-
/* do not use this function in a driver */
static inline bool is_device_dma_coherent(struct device *dev)
{
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 5169dfba9718..07d4fcfe5c2e 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -258,8 +258,7 @@ static void __init visstrim_analog_camera_init(void)
return;
dma_declare_coherent_memory(&pdev->dev, mx2_camera_base,
- mx2_camera_base, MX2_CAMERA_BUF_SIZE,
- DMA_MEMORY_EXCLUSIVE);
+ mx2_camera_base, MX2_CAMERA_BUF_SIZE);
}
static void __init visstrim_reserve(void)
@@ -445,8 +444,7 @@ static void __init visstrim_coda_init(void)
dma_declare_coherent_memory(&pdev->dev,
mx2_camera_base + MX2_CAMERA_BUF_SIZE,
mx2_camera_base + MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE,
- DMA_MEMORY_EXCLUSIVE);
+ MX2_CAMERA_BUF_SIZE);
}
/* DMA deinterlace */
@@ -465,8 +463,7 @@ static void __init visstrim_deinterlace_init(void)
dma_declare_coherent_memory(&pdev->dev,
mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE,
- DMA_MEMORY_EXCLUSIVE);
+ MX2_CAMERA_BUF_SIZE);
}
/* Emma-PrP for format conversion */
@@ -485,8 +482,7 @@ static void __init visstrim_emmaprp_init(void)
*/
ret = dma_declare_coherent_memory(&pdev->dev,
mx2_camera_base, mx2_camera_base,
- MX2_CAMERA_BUF_SIZE,
- DMA_MEMORY_EXCLUSIVE);
+ MX2_CAMERA_BUF_SIZE);
if (ret)
pr_err("Failed to declare memory for emmaprp\n");
}
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 643a3d749703..fe50f4cf00a7 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -475,8 +475,7 @@ static int __init mx31moboard_init_cam(void)
ret = dma_declare_coherent_memory(&pdev->dev,
mx3_camera_base, mx3_camera_base,
- MX3_CAMERA_BUF_SIZE,
- DMA_MEMORY_EXCLUSIVE);
+ MX3_CAMERA_BUF_SIZE);
if (ret)
goto err;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 1e3e08a1c456..c6aab9c36ff1 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -188,6 +188,7 @@ const struct dma_map_ops arm_dma_ops = {
.unmap_page = arm_dma_unmap_page,
.map_sg = arm_dma_map_sg,
.unmap_sg = arm_dma_unmap_sg,
+ .map_resource = dma_direct_map_resource,
.sync_single_for_cpu = arm_dma_sync_single_for_cpu,
.sync_single_for_device = arm_dma_sync_single_for_device,
.sync_sg_for_cpu = arm_dma_sync_sg_for_cpu,
@@ -211,6 +212,7 @@ const struct dma_map_ops arm_coherent_dma_ops = {
.get_sgtable = arm_dma_get_sgtable,
.map_page = arm_coherent_dma_map_page,
.map_sg = arm_dma_map_sg,
+ .map_resource = dma_direct_map_resource,
.dma_supported = arm_dma_supported,
};
EXPORT_SYMBOL(arm_coherent_dma_ops);
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 4fab69620719..117b2541ef3d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -22,12 +22,14 @@ config ARM64
select ARCH_HAS_KCOV
select ARCH_HAS_MEMBARRIER_SYNC_CORE
select ARCH_HAS_PTE_SPECIAL
+ select ARCH_HAS_SETUP_DMA_OPS
select ARCH_HAS_SET_MEMORY
select ARCH_HAS_STRICT_KERNEL_RWX
select ARCH_HAS_STRICT_MODULE_RWX
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYSCALL_WRAPPER
+ select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select ARCH_INLINE_READ_LOCK if !PREEMPT
@@ -137,7 +139,6 @@ config ARM64
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_GCC_PLUGINS
- select HAVE_GENERIC_DMA_COHERENT
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_MEMBLOCK_NODE_MAP if NUMA
@@ -163,7 +164,6 @@ config ARM64
select NEED_SG_DMA_LENGTH
select OF
select OF_EARLY_FLATTREE
- select OF_RESERVED_MEM
select PCI_DOMAINS_GENERIC if PCI
select PCI_ECAM if (ACPI && PCI)
select PCI_SYSCALL if PCI
diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h
index 95dbf3ef735a..de98191e4c7d 100644
--- a/arch/arm64/include/asm/dma-mapping.h
+++ b/arch/arm64/include/asm/dma-mapping.h
@@ -29,15 +29,6 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
return NULL;
}
-void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
- const struct iommu_ops *iommu, bool coherent);
-#define arch_setup_dma_ops arch_setup_dma_ops
-
-#ifdef CONFIG_IOMMU_DMA
-void arch_teardown_dma_ops(struct device *dev);
-#define arch_teardown_dma_ops arch_teardown_dma_ops
-#endif
-
/*
* Do not use this function in a driver, it is only provided for
* arch/arm/mm/xen.c, which is used by arm64 as well.
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 6959e0b1e956..725a115759c9 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -31,7 +31,6 @@ config CSKY
select HAVE_ARCH_TRACEHOOK
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_TRACER
- select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
@@ -43,7 +42,6 @@ config CSKY
select MODULES_USE_ELF_RELA if MODULES
select OF
select OF_EARLY_FLATTREE
- select OF_RESERVED_MEM
select PERF_USE_VMALLOC if CPU_CK610
select RTC_LIB
select TIMER_OF
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3d7f1153155f..4a5f5b0ee9a9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -57,7 +57,6 @@ config MIPS
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
- select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_IRQ_EXIT_ON_IRQ_STACK
@@ -1119,6 +1118,7 @@ config DMA_MAYBE_COHERENT
config DMA_PERDEV_COHERENT
bool
+ select ARCH_HAS_SETUP_DMA_OPS
select DMA_NONCOHERENT
config DMA_NONCOHERENT
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 20dfaad3a55d..34de7b17b41b 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -15,14 +15,4 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
#endif
}
-#define arch_setup_dma_ops arch_setup_dma_ops
-static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
- u64 size, const struct iommu_ops *iommu,
- bool coherent)
-{
-#ifdef CONFIG_DMA_PERDEV_COHERENT
- dev->dma_coherent = coherent;
-#endif
-}
-
#endif /* _ASM_DMA_MAPPING_H */
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index b57465733e87..f9549d2fbea3 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -156,3 +156,11 @@ void arch_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
dma_sync_virt(vaddr, size, direction);
}
+
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ const struct iommu_ops *iommu, bool coherent)
+{
+ dev->dma_coherent = coherent;
+}
+#endif
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b5dce13a6132..2d0be82c3061 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -232,7 +232,6 @@ config PPC
select NEED_SG_DMA_LENGTH
select OF
select OF_EARLY_FLATTREE
- select OF_RESERVED_MEM
select OLD_SIGACTION if PPC32
select OLD_SIGSUSPEND
select PCI_DOMAINS if PCI
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index b41311f6a94f..eb56c82d8aa1 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -32,7 +32,6 @@ config RISCV
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_DMA_CONTIGUOUS
select HAVE_FUTEX_CMPXCHG if FUTEX
- select HAVE_GENERIC_DMA_COHERENT
select HAVE_PERF_EVENTS
select HAVE_SYSCALL_TRACEPOINTS
select IRQ_DOMAIN
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index d9a9144dec35..b1c91ea9a958 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -7,11 +7,11 @@ config SUPERH
select ARCH_NO_COHERENT_DMA_MMAP if !MMU
select HAVE_PATA_PLATFORM
select CLKDEV_LOOKUP
+ select DMA_DECLARE_COHERENT
select HAVE_IDE if HAS_IOPORT_MAP
select HAVE_MEMBLOCK_NODE_MAP
select ARCH_DISCARD_MEMBLOCK
select HAVE_OPROFILE
- select HAVE_GENERIC_DMA_COHERENT
select HAVE_ARCH_TRACEHOOK
select HAVE_PERF_EVENTS
select HAVE_DEBUG_BUGVERBOSE
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 8f234d0435aa..7899b4f51fdd 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -529,9 +529,8 @@ static int __init ap325rxa_devices_setup(void)
device_initialize(&ap325rxa_ceu_device.dev);
arch_setup_pdev_archdata(&ap325rxa_ceu_device);
dma_declare_coherent_memory(&ap325rxa_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,
- DMA_MEMORY_EXCLUSIVE);
+ ceu_dma_membase, ceu_dma_membase,
+ ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
platform_device_add(&ap325rxa_ceu_device);
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 5495efa07335..3c59019c4695 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -1438,8 +1438,7 @@ static int __init arch_setup(void)
dma_declare_coherent_memory(&ecovec_ceu_devices[0]->dev,
ceu0_dma_membase, ceu0_dma_membase,
ceu0_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1,
- DMA_MEMORY_EXCLUSIVE);
+ CEU_BUFFER_MEMORY_SIZE - 1);
platform_device_add(ecovec_ceu_devices[0]);
device_initialize(&ecovec_ceu_devices[1]->dev);
@@ -1447,8 +1446,7 @@ static int __init arch_setup(void)
dma_declare_coherent_memory(&ecovec_ceu_devices[1]->dev,
ceu1_dma_membase, ceu1_dma_membase,
ceu1_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1,
- DMA_MEMORY_EXCLUSIVE);
+ CEU_BUFFER_MEMORY_SIZE - 1);
platform_device_add(ecovec_ceu_devices[1]);
gpiod_add_lookup_table(&cn12_power_gpiod_table);
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 203d249a0a2b..b8bf67c86eab 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -603,9 +603,8 @@ static int __init kfr2r09_devices_setup(void)
device_initialize(&kfr2r09_ceu_device.dev);
arch_setup_pdev_archdata(&kfr2r09_ceu_device);
dma_declare_coherent_memory(&kfr2r09_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,
- DMA_MEMORY_EXCLUSIVE);
+ ceu_dma_membase, ceu_dma_membase,
+ ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
platform_device_add(&kfr2r09_ceu_device);
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 1d2993bdd231..03579faa4ce3 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -604,9 +604,8 @@ static int __init migor_devices_setup(void)
device_initialize(&migor_ceu_device.dev);
arch_setup_pdev_archdata(&migor_ceu_device);
dma_declare_coherent_memory(&migor_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,
- DMA_MEMORY_EXCLUSIVE);
+ ceu_dma_membase, ceu_dma_membase,
+ ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
platform_device_add(&migor_ceu_device);
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index fdbec22ae687..13c2d3ce78f4 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -941,8 +941,7 @@ static int __init devices_setup(void)
dma_declare_coherent_memory(&ms7724se_ceu_devices[0]->dev,
ceu0_dma_membase, ceu0_dma_membase,
ceu0_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1,
- DMA_MEMORY_EXCLUSIVE);
+ CEU_BUFFER_MEMORY_SIZE - 1);
platform_device_add(ms7724se_ceu_devices[0]);
device_initialize(&ms7724se_ceu_devices[1]->dev);
@@ -950,8 +949,7 @@ static int __init devices_setup(void)
dma_declare_coherent_memory(&ms7724se_ceu_devices[1]->dev,
ceu1_dma_membase, ceu1_dma_membase,
ceu1_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1,
- DMA_MEMORY_EXCLUSIVE);
+ CEU_BUFFER_MEMORY_SIZE - 1);
platform_device_add(ms7724se_ceu_devices[1]);
return platform_add_devices(ms7724se_devices,
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index dfdbd05b6eb1..7be8694c0d13 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -63,8 +63,7 @@ static void gapspci_fixup_resources(struct pci_dev *dev)
BUG_ON(dma_declare_coherent_memory(&dev->dev,
res.start,
region.start,
- resource_size(&res),
- DMA_MEMORY_EXCLUSIVE));
+ resource_size(&res)));
break;
default:
printk("PCI: Failed resource fixup\n");
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index b1a09080e8da..4ae7388b1bff 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -745,15 +745,12 @@ static int dma_4u_supported(struct device *dev, u64 device_mask)
{
struct iommu *iommu = dev->archdata.iommu;
- if (device_mask > DMA_BIT_MASK(32))
- return 0;
- if ((device_mask & iommu->dma_addr_mask) == iommu->dma_addr_mask)
+ if (ali_sound_dma_hack(dev, device_mask))
return 1;
-#ifdef CONFIG_PCI
- if (dev_is_pci(dev))
- return pci64_dma_supported(to_pci_dev(dev), device_mask);
-#endif
- return 0;
+
+ if (device_mask < iommu->dma_addr_mask)
+ return 0;
+ return 1;
}
static const struct dma_map_ops sun4u_dma_ops = {
diff --git a/arch/sparc/kernel/kernel.h b/arch/sparc/kernel/kernel.h
index ddffd368e057..f6f498ba3198 100644
--- a/arch/sparc/kernel/kernel.h
+++ b/arch/sparc/kernel/kernel.h
@@ -45,7 +45,11 @@ void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs);
void __irq_entry smp_kgdb_capture_client(int irq, struct pt_regs *regs);
/* pci.c */
-int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask);
+#ifdef CONFIG_PCI
+int ali_sound_dma_hack(struct device *dev, u64 device_mask);
+#else
+#define ali_sound_dma_hack(dev, mask) (0)
+#endif
/* signal32.c */
void do_sigreturn32(struct pt_regs *regs);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index bcfec6a85d23..5ed43828e078 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -956,51 +956,35 @@ void arch_teardown_msi_irq(unsigned int irq)
}
#endif /* !(CONFIG_PCI_MSI) */
-static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
+/* ALI sound chips generate 31-bits of DMA, a special register
+ * determines what bit 31 is emitted as.
+ */
+int ali_sound_dma_hack(struct device *dev, u64 device_mask)
{
+ struct iommu *iommu = dev->archdata.iommu;
struct pci_dev *ali_isa_bridge;
u8 val;
- /* ALI sound chips generate 31-bits of DMA, a special register
- * determines what bit 31 is emitted as.
- */
+ if (!dev_is_pci(dev))
+ return 0;
+
+ if (to_pci_dev(dev)->vendor != PCI_VENDOR_ID_AL ||
+ to_pci_dev(dev)->device != PCI_DEVICE_ID_AL_M5451 ||
+ device_mask != 0x7fffffff)
+ return 0;
+
ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL,
PCI_DEVICE_ID_AL_M1533,
NULL);
pci_read_config_byte(ali_isa_bridge, 0x7e, &val);
- if (set_bit)
+ if (iommu->dma_addr_mask & 0x80000000)
val |= 0x01;
else
val &= ~0x01;
pci_write_config_byte(ali_isa_bridge, 0x7e, val);
pci_dev_put(ali_isa_bridge);
-}
-
-int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask)
-{
- u64 dma_addr_mask;
-
- if (pdev == NULL) {
- dma_addr_mask = 0xffffffff;
- } else {
- struct iommu *iommu = pdev->dev.archdata.iommu;
-
- dma_addr_mask = iommu->dma_addr_mask;
-
- if (pdev->vendor == PCI_VENDOR_ID_AL &&
- pdev->device == PCI_DEVICE_ID_AL_M5451 &&
- device_mask == 0x7fffffff) {
- ali_sound_dma_hack(pdev,
- (dma_addr_mask & 0x80000000) != 0);
- return 1;
- }
- }
-
- if (device_mask >= (1UL << 32UL))
- return 0;
-
- return (device_mask & dma_addr_mask) == dma_addr_mask;
+ return 1;
}
void pci_resource_to_user(const struct pci_dev *pdev, int bar,
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index fa0e42b4cbfb..a8af6023c126 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -92,7 +92,7 @@ static long iommu_batch_flush(struct iommu_batch *p, u64 mask)
prot &= (HV_PCI_MAP_ATTR_READ | HV_PCI_MAP_ATTR_WRITE);
while (npages != 0) {
- if (mask <= DMA_BIT_MASK(32)) {
+ if (mask <= DMA_BIT_MASK(32) || !pbm->iommu->atu) {
num = pci_sun4v_iommu_map(devhandle,
HV_PCI_TSBID(0, entry),
npages,
@@ -208,7 +208,7 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size,
atu = iommu->atu;
mask = dev->coherent_dma_mask;
- if (mask <= DMA_BIT_MASK(32))
+ if (mask <= DMA_BIT_MASK(32) || !atu)
tbl = &iommu->tbl;
else
tbl = &atu->tbl;
@@ -674,18 +674,12 @@ static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist,
static int dma_4v_supported(struct device *dev, u64 device_mask)
{
struct iommu *iommu = dev->archdata.iommu;
- u64 dma_addr_mask = iommu->dma_addr_mask;
-
- if (device_mask > DMA_BIT_MASK(32)) {
- if (iommu->atu)
- dma_addr_mask = iommu->atu->dma_addr_mask;
- else
- return 0;
- }
- if ((device_mask & dma_addr_mask) == dma_addr_mask)
+ if (ali_sound_dma_hack(dev, device_mask))
return 1;
- return pci64_dma_supported(to_pci_dev(dev), device_mask);
+ if (device_mask < iommu->dma_addr_mask)
+ return 0;
+ return 1;
}
static const struct dma_map_ops sun4v_dma_ops = {
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index a7f1ae58d211..817d82608712 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -5,7 +5,6 @@ config UNICORE32
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
- select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select GENERIC_ATOMIC64
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 90b562a34d65..c1f9b3cf437c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -14,7 +14,6 @@ config X86_32
select ARCH_WANT_IPC_PARSE_VERSION
select CLKSRC_I8253
select CLONE_BACKWARDS
- select HAVE_GENERIC_DMA_COHERENT
select MODULES_USE_ELF_REL
select OLD_SIGACTION
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index bacf87ee7975..4b9aafe766c5 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -450,7 +450,6 @@ config USE_OF
bool "Flattened Device Tree support"
select OF
select OF_EARLY_FLATTREE
- select OF_RESERVED_MEM
help
Include support for flattened device tree machine descriptions.
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 3e63a900b330..059700ea3521 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -191,83 +191,6 @@ config DMA_FENCE_TRACE
lockup related problems for dma-buffers shared across multiple
devices.
-config DMA_CMA
- bool "DMA Contiguous Memory Allocator"
- depends on HAVE_DMA_CONTIGUOUS && CMA
- help
- This enables the Contiguous Memory Allocator which allows drivers
- to allocate big physically-contiguous blocks of memory for use with
- hardware components that do not support I/O map nor scatter-gather.
-
- You can disable CMA by specifying "cma=0" on the kernel's command
- line.
-
- For more information see <include/linux/dma-contiguous.h>.
- If unsure, say "n".
-
-if DMA_CMA
-comment "Default contiguous memory area size:"
-
-config CMA_SIZE_MBYTES
- int "Size in Mega Bytes"
- depends on !CMA_SIZE_SEL_PERCENTAGE
- default 0 if X86
- default 16
- help
- Defines the size (in MiB) of the default memory area for Contiguous
- Memory Allocator. If the size of 0 is selected, CMA is disabled by
- default, but it can be enabled by passing cma=size[MG] to the kernel.
-
-
-config CMA_SIZE_PERCENTAGE
- int "Percentage of total memory"
- depends on !CMA_SIZE_SEL_MBYTES
- default 0 if X86
- default 10
- help
- Defines the size of the default memory area for Contiguous Memory
- Allocator as a percentage of the total memory in the system.
- If 0 percent is selected, CMA is disabled by default, but it can be
- enabled by passing cma=size[MG] to the kernel.
-
-choice
- prompt "Selected region size"
- default CMA_SIZE_SEL_MBYTES
-
-config CMA_SIZE_SEL_MBYTES
- bool "Use mega bytes value only"
-
-config CMA_SIZE_SEL_PERCENTAGE
- bool "Use percentage value only"
-
-config CMA_SIZE_SEL_MIN
- bool "Use lower value (minimum)"
-
-config CMA_SIZE_SEL_MAX
- bool "Use higher value (maximum)"
-
-endchoice
-
-config CMA_ALIGNMENT
- int "Maximum PAGE_SIZE order of alignment for contiguous buffers"
- range 4 12
- default 8
- help
- DMA mapping framework by default aligns all buffers to the smallest
- PAGE_SIZE order which is greater than or equal to the requested buffer
- size. This works well for buffers up to a few hundreds kilobytes, but
- for larger buffers it just a memory waste. With this parameter you can
- specify the maximum PAGE_SIZE order for contiguous buffers. Larger
- buffers will be aligned only to this specified order. The order is
- expressed as a power of two multiplied by the PAGE_SIZE.
-
- For example, if your system defaults to 4KiB pages, the order value
- of 8 means that the buffers will be aligned up to 1MiB only.
-
- If unsure, leave the default value "8".
-
-endif
-
config GENERIC_ARCH_TOPOLOGY
bool
help
diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
index aff0ab7bf83d..82389aead6ed 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
@@ -439,42 +439,14 @@ static void vb2_dc_put_userptr(void *buf_priv)
set_page_dirty_lock(pages[i]);
sg_free_table(sgt);
kfree(sgt);
+ } else {
+ dma_unmap_resource(buf->dev, buf->dma_addr, buf->size,
+ buf->dma_dir, 0);
}
vb2_destroy_framevec(buf->vec);
kfree(buf);
}
-/*
- * For some kind of reserved memory there might be no struct page available,
- * so all that can be done to support such 'pages' is to try to convert
- * pfn to dma address or at the last resort just assume that
- * dma address == physical address (like it has been assumed in earlier version
- * of videobuf2-dma-contig
- */
-
-#ifdef __arch_pfn_to_dma
-static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn)
-{
- return (dma_addr_t)__arch_pfn_to_dma(dev, pfn);
-}
-#elif defined(__pfn_to_bus)
-static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn)
-{
- return (dma_addr_t)__pfn_to_bus(pfn);
-}
-#elif defined(__pfn_to_phys)
-static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn)
-{
- return (dma_addr_t)__pfn_to_phys(pfn);
-}
-#else
-static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn)
-{
- /* really, we cannot do anything better at this point */
- return (dma_addr_t)(pfn) << PAGE_SHIFT;
-}
-#endif
-
static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
unsigned long size, enum dma_data_direction dma_dir)
{
@@ -528,7 +500,12 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
for (i = 1; i < n_pages; i++)
if (nums[i-1] + 1 != nums[i])
goto fail_pfnvec;
- buf->dma_addr = vb2_dc_pfn_to_dma(buf->dev, nums[0]);
+ buf->dma_addr = dma_map_resource(buf->dev,
+ __pfn_to_phys(nums[0]), size, buf->dma_dir, 0);
+ if (dma_mapping_error(buf->dev, buf->dma_addr)) {
+ ret = -ENOMEM;
+ goto fail_pfnvec;
+ }
goto out;
}
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ad8b1f400919..0ce2d8dfc5f1 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1065,6 +1065,8 @@ config MFD_SI476X_CORE
config MFD_SM501
tristate "Silicon Motion SM501"
+ depends on HAS_DMA
+ select DMA_DECLARE_COHERENT
---help---
This is the core driver for the Silicon Motion SM501 multimedia
companion chip. This device is a multifunction device which may
@@ -1674,6 +1676,7 @@ config MFD_TC6393XB
select GPIOLIB
select MFD_CORE
select MFD_TMIO
+ select DMA_DECLARE_COHERENT
help
Support for Toshiba Mobile IO Controller TC6393XB
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index ad3fcad4d75b..37c2ccbefecd 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -43,6 +43,7 @@ config OF_FLATTREE
config OF_EARLY_FLATTREE
bool
+ select DMA_DECLARE_COHERENT if HAS_DMA
select OF_FLATTREE
config OF_PROMTREE
@@ -81,10 +82,9 @@ config OF_MDIO
OpenFirmware MDIO bus (Ethernet PHY) accessors
config OF_RESERVED_MEM
- depends on OF_EARLY_FLATTREE
bool
- help
- Helpers to allow for reservation of memory regions
+ depends on OF_EARLY_FLATTREE
+ default y if DMA_DECLARE_COHERENT || DMA_CMA
config OF_RESOLVE
bool
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 097b0d43d13c..8937ba70d817 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -712,8 +712,8 @@ ccio_dma_supported(struct device *dev, u64 mask)
return 0;
}
- /* only support 32-bit devices (ie PCI/GSC) */
- return (int)(mask == 0xffffffffUL);
+ /* only support 32-bit or better devices (ie PCI/GSC) */
+ return (int)(mask >= 0xffffffffUL);
}
/**
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index c9233cddf9a2..c26228c25f99 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -126,8 +126,7 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev)
retval = dma_declare_coherent_memory(dev, mem->start,
mem->start - mem->parent->start,
- resource_size(mem),
- DMA_MEMORY_EXCLUSIVE);
+ resource_size(mem));
if (retval) {
dev_err(dev, "cannot declare coherent memory\n");
goto err1;
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index a631dbb369d7..f88a0370659f 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -225,7 +225,7 @@ static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
}
ret = dma_declare_coherent_memory(&dev->dev, sram->start, sram->start,
- resource_size(sram), DMA_MEMORY_EXCLUSIVE);
+ resource_size(sram));
if (ret)
goto err_dma_declare;
diff --git a/include/linux/device.h b/include/linux/device.h
index f40f6064ba05..b425a7ee04ce 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -1028,8 +1028,10 @@ struct device {
struct list_head dma_pools; /* dma pools (if dma'ble) */
+#ifdef CONFIG_DMA_DECLARE_COHERENT
struct dma_coherent_mem *dma_mem; /* internal for coherent mem
override */
+#endif
#ifdef CONFIG_DMA_CMA
struct cma *cma_area; /* contiguous memory area for dma
allocations */
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index f6ded992c183..70ad15758a70 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -153,7 +153,7 @@ static inline int is_device_dma_capable(struct device *dev)
return dev->dma_mask != NULL && *dev->dma_mask != DMA_MASK_NONE;
}
-#ifdef CONFIG_HAVE_GENERIC_DMA_COHERENT
+#ifdef CONFIG_DMA_DECLARE_COHERENT
/*
* These three functions are only for dma allocator.
* Don't use them in device drivers.
@@ -192,7 +192,7 @@ static inline int dma_mmap_from_global_coherent(struct vm_area_struct *vma,
{
return 0;
}
-#endif /* CONFIG_HAVE_GENERIC_DMA_COHERENT */
+#endif /* CONFIG_DMA_DECLARE_COHERENT */
static inline bool dma_is_direct(const struct dma_map_ops *ops)
{
@@ -208,6 +208,8 @@ dma_addr_t dma_direct_map_page(struct device *dev, struct page *page,
unsigned long attrs);
int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
enum dma_data_direction dir, unsigned long attrs);
+dma_addr_t dma_direct_map_resource(struct device *dev, phys_addr_t paddr,
+ size_t size, enum dma_data_direction dir, unsigned long attrs);
#if defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE) || \
defined(CONFIG_SWIOTLB)
@@ -346,19 +348,20 @@ static inline dma_addr_t dma_map_resource(struct device *dev,
unsigned long attrs)
{
const struct dma_map_ops *ops = get_dma_ops(dev);
- dma_addr_t addr;
+ dma_addr_t addr = DMA_MAPPING_ERROR;
BUG_ON(!valid_dma_direction(dir));
/* Don't allow RAM to be mapped */
- BUG_ON(pfn_valid(PHYS_PFN(phys_addr)));
+ if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
+ return DMA_MAPPING_ERROR;
- addr = phys_addr;
- if (ops && ops->map_resource)
+ if (dma_is_direct(ops))
+ addr = dma_direct_map_resource(dev, phys_addr, size, dir, attrs);
+ else if (ops->map_resource)
addr = ops->map_resource(dev, phys_addr, size, dir, attrs);
debug_dma_map_resource(dev, phys_addr, size, dir, addr);
-
return addr;
}
@@ -369,7 +372,7 @@ static inline void dma_unmap_resource(struct device *dev, dma_addr_t addr,
const struct dma_map_ops *ops = get_dma_ops(dev);
BUG_ON(!valid_dma_direction(dir));
- if (ops && ops->unmap_resource)
+ if (!dma_is_direct(ops) && ops->unmap_resource)
ops->unmap_resource(dev, addr, size, dir, attrs);
debug_dma_unmap_resource(dev, addr, size, dir);
}
@@ -668,15 +671,23 @@ static inline int dma_coerce_mask_and_coherent(struct device *dev, u64 mask)
return dma_set_mask_and_coherent(dev, mask);
}
-#ifndef arch_setup_dma_ops
+#ifdef CONFIG_ARCH_HAS_SETUP_DMA_OPS
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ const struct iommu_ops *iommu, bool coherent);
+#else
static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
- u64 size, const struct iommu_ops *iommu,
- bool coherent) { }
-#endif
+ u64 size, const struct iommu_ops *iommu, bool coherent)
+{
+}
+#endif /* CONFIG_ARCH_HAS_SETUP_DMA_OPS */
-#ifndef arch_teardown_dma_ops
-static inline void arch_teardown_dma_ops(struct device *dev) { }
-#endif
+#ifdef CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS
+void arch_teardown_dma_ops(struct device *dev);
+#else
+static inline void arch_teardown_dma_ops(struct device *dev)
+{
+}
+#endif /* CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS */
static inline unsigned int dma_get_max_seg_size(struct device *dev)
{
@@ -725,19 +736,14 @@ static inline int dma_get_cache_alignment(void)
return 1;
}
-/* flags for the coherent memory api */
-#define DMA_MEMORY_EXCLUSIVE 0x01
-
-#ifdef CONFIG_HAVE_GENERIC_DMA_COHERENT
+#ifdef CONFIG_DMA_DECLARE_COHERENT
int dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
- dma_addr_t device_addr, size_t size, int flags);
+ dma_addr_t device_addr, size_t size);
void dma_release_declared_memory(struct device *dev);
-void *dma_mark_declared_memory_occupied(struct device *dev,
- dma_addr_t device_addr, size_t size);
#else
static inline int
dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
- dma_addr_t device_addr, size_t size, int flags)
+ dma_addr_t device_addr, size_t size)
{
return -ENOSYS;
}
@@ -746,14 +752,7 @@ static inline void
dma_release_declared_memory(struct device *dev)
{
}
-
-static inline void *
-dma_mark_declared_memory_occupied(struct device *dev,
- dma_addr_t device_addr, size_t size)
-{
- return ERR_PTR(-EBUSY);
-}
-#endif /* CONFIG_HAVE_GENERIC_DMA_COHERENT */
+#endif /* CONFIG_DMA_DECLARE_COHERENT */
static inline void *dmam_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig
index 0711d18645de..a06ba3013b3b 100644
--- a/kernel/dma/Kconfig
+++ b/kernel/dma/Kconfig
@@ -19,7 +19,13 @@ config ARCH_HAS_DMA_COHERENCE_H
config ARCH_HAS_DMA_SET_MASK
bool
-config HAVE_GENERIC_DMA_COHERENT
+config DMA_DECLARE_COHERENT
+ bool
+
+config ARCH_HAS_SETUP_DMA_OPS
+ bool
+
+config ARCH_HAS_TEARDOWN_DMA_OPS
bool
config ARCH_HAS_SYNC_DMA_FOR_DEVICE
@@ -56,3 +62,116 @@ config DMA_REMAP
config DMA_DIRECT_REMAP
bool
select DMA_REMAP
+
+config DMA_CMA
+ bool "DMA Contiguous Memory Allocator"
+ depends on HAVE_DMA_CONTIGUOUS && CMA
+ help
+ This enables the Contiguous Memory Allocator which allows drivers
+ to allocate big physically-contiguous blocks of memory for use with
+ hardware components that do not support I/O map nor scatter-gather.
+
+ You can disable CMA by specifying "cma=0" on the kernel's command
+ line.
+
+ For more information see <include/linux/dma-contiguous.h>.
+ If unsure, say "n".
+
+if DMA_CMA
+comment "Default contiguous memory area size:"
+
+config CMA_SIZE_MBYTES
+ int "Size in Mega Bytes"
+ depends on !CMA_SIZE_SEL_PERCENTAGE
+ default 0 if X86
+ default 16
+ help
+ Defines the size (in MiB) of the default memory area for Contiguous
+ Memory Allocator. If the size of 0 is selected, CMA is disabled by
+ default, but it can be enabled by passing cma=size[MG] to the kernel.
+
+
+config CMA_SIZE_PERCENTAGE
+ int "Percentage of total memory"
+ depends on !CMA_SIZE_SEL_MBYTES
+ default 0 if X86
+ default 10
+ help
+ Defines the size of the default memory area for Contiguous Memory
+ Allocator as a percentage of the total memory in the system.
+ If 0 percent is selected, CMA is disabled by default, but it can be
+ enabled by passing cma=size[MG] to the kernel.
+
+choice
+ prompt "Selected region size"
+ default CMA_SIZE_SEL_MBYTES
+
+config CMA_SIZE_SEL_MBYTES
+ bool "Use mega bytes value only"
+
+config CMA_SIZE_SEL_PERCENTAGE
+ bool "Use percentage value only"
+
+config CMA_SIZE_SEL_MIN
+ bool "Use lower value (minimum)"
+
+config CMA_SIZE_SEL_MAX
+ bool "Use higher value (maximum)"
+
+endchoice
+
+config CMA_ALIGNMENT
+ int "Maximum PAGE_SIZE order of alignment for contiguous buffers"
+ range 4 12
+ default 8
+ help
+ DMA mapping framework by default aligns all buffers to the smallest
+ PAGE_SIZE order which is greater than or equal to the requested buffer
+ size. This works well for buffers up to a few hundreds kilobytes, but
+ for larger buffers it just a memory waste. With this parameter you can
+ specify the maximum PAGE_SIZE order for contiguous buffers. Larger
+ buffers will be aligned only to this specified order. The order is
+ expressed as a power of two multiplied by the PAGE_SIZE.
+
+ For example, if your system defaults to 4KiB pages, the order value
+ of 8 means that the buffers will be aligned up to 1MiB only.
+
+ If unsure, leave the default value "8".
+
+endif
+
+config DMA_API_DEBUG
+ bool "Enable debugging of DMA-API usage"
+ select NEED_DMA_MAP_STATE
+ help
+ Enable this option to debug the use of the DMA API by device drivers.
+ With this option you will be able to detect common bugs in device
+ drivers like double-freeing of DMA mappings or freeing mappings that
+ were never allocated.
+
+ This also attempts to catch cases where a page owned by DMA is
+ accessed by the cpu in a way that could cause data corruption. For
+ example, this enables cow_user_page() to check that the source page is
+ not undergoing DMA.
+
+ This option causes a performance degradation. Use only if you want to
+ debug device drivers and dma interactions.
+
+ If unsure, say N.
+
+config DMA_API_DEBUG_SG
+ bool "Debug DMA scatter-gather usage"
+ default y
+ depends on DMA_API_DEBUG
+ help
+ Perform extra checking that callers of dma_map_sg() have respected the
+ appropriate segment length/boundary limits for the given device when
+ preparing DMA scatterlists.
+
+ This is particularly likely to have been overlooked in cases where the
+ dma_map_sg() API is used for general bulk mapping of pages rather than
+ preparing literal scatter-gather descriptors, where there is a risk of
+ unexpected behaviour from DMA API implementations if the scatterlist
+ is technically out-of-spec.
+
+ If unsure, say N.
diff --git a/kernel/dma/Makefile b/kernel/dma/Makefile
index 72ff6e46aa86..d237cf3dc181 100644
--- a/kernel/dma/Makefile
+++ b/kernel/dma/Makefile
@@ -2,7 +2,7 @@
obj-$(CONFIG_HAS_DMA) += mapping.o direct.o dummy.o
obj-$(CONFIG_DMA_CMA) += contiguous.o
-obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += coherent.o
+obj-$(CONFIG_DMA_DECLARE_COHERENT) += coherent.o
obj-$(CONFIG_DMA_VIRT_OPS) += virt.o
obj-$(CONFIG_DMA_API_DEBUG) += debug.o
obj-$(CONFIG_SWIOTLB) += swiotlb.o
diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c
index 66f0fb7e9a3a..29fd6590dc1e 100644
--- a/kernel/dma/coherent.c
+++ b/kernel/dma/coherent.c
@@ -14,7 +14,6 @@ struct dma_coherent_mem {
dma_addr_t device_base;
unsigned long pfn_base;
int size;
- int flags;
unsigned long *bitmap;
spinlock_t spinlock;
bool use_dev_dma_pfn_offset;
@@ -38,12 +37,12 @@ static inline dma_addr_t dma_get_device_base(struct device *dev,
return mem->device_base;
}
-static int dma_init_coherent_memory(
- phys_addr_t phys_addr, dma_addr_t device_addr, size_t size, int flags,
- struct dma_coherent_mem **mem)
+static int dma_init_coherent_memory(phys_addr_t phys_addr,
+ dma_addr_t device_addr, size_t size,
+ struct dma_coherent_mem **mem)
{
struct dma_coherent_mem *dma_mem = NULL;
- void __iomem *mem_base = NULL;
+ void *mem_base = NULL;
int pages = size >> PAGE_SHIFT;
int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
int ret;
@@ -73,7 +72,6 @@ static int dma_init_coherent_memory(
dma_mem->device_base = device_addr;
dma_mem->pfn_base = PFN_DOWN(phys_addr);
dma_mem->size = pages;
- dma_mem->flags = flags;
spin_lock_init(&dma_mem->spinlock);
*mem = dma_mem;
@@ -110,12 +108,12 @@ static int dma_assign_coherent_memory(struct device *dev,
}
int dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
- dma_addr_t device_addr, size_t size, int flags)
+ dma_addr_t device_addr, size_t size)
{
struct dma_coherent_mem *mem;
int ret;
- ret = dma_init_coherent_memory(phys_addr, device_addr, size, flags, &mem);
+ ret = dma_init_coherent_memory(phys_addr, device_addr, size, &mem);
if (ret)
return ret;
@@ -137,29 +135,6 @@ void dma_release_declared_memory(struct device *dev)
}
EXPORT_SYMBOL(dma_release_declared_memory);
-void *dma_mark_declared_memory_occupied(struct device *dev,
- dma_addr_t device_addr, size_t size)
-{
- struct dma_coherent_mem *mem = dev->dma_mem;
- unsigned long flags;
- int pos, err;
-
- size += device_addr & ~PAGE_MASK;
-
- if (!mem)
- return ERR_PTR(-EINVAL);
-
- spin_lock_irqsave(&mem->spinlock, flags);
- pos = PFN_DOWN(device_addr - dma_get_device_base(dev, mem));
- err = bitmap_allocate_region(mem->bitmap, pos, get_order(size));
- spin_unlock_irqrestore(&mem->spinlock, flags);
-
- if (err != 0)
- return ERR_PTR(err);
- return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
static void *__dma_alloc_from_coherent(struct dma_coherent_mem *mem,
ssize_t size, dma_addr_t *dma_handle)
{
@@ -213,15 +188,7 @@ int dma_alloc_from_dev_coherent(struct device *dev, ssize_t size,
return 0;
*ret = __dma_alloc_from_coherent(mem, size, dma_handle);
- if (*ret)
- return 1;
-
- /*
- * In the case where the allocation can not be satisfied from the
- * per-device area, try to fall back to generic memory if the
- * constraints allow it.
- */
- return mem->flags & DMA_MEMORY_EXCLUSIVE;
+ return 1;
}
void *dma_alloc_from_global_coherent(ssize_t size, dma_addr_t *dma_handle)
@@ -350,8 +317,7 @@ static int rmem_dma_device_init(struct reserved_mem *rmem, struct device *dev)
if (!mem) {
ret = dma_init_coherent_memory(rmem->base, rmem->base,
- rmem->size,
- DMA_MEMORY_EXCLUSIVE, &mem);
+ rmem->size, &mem);
if (ret) {
pr_err("Reserved memory: failed to init DMA memory pool at %pa, size %ld MiB\n",
&rmem->base, (unsigned long)rmem->size / SZ_1M);
diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index 23cf5361bcf1..45d51e8e26f6 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -134,17 +134,6 @@ static u32 nr_total_entries;
/* number of preallocated entries requested by kernel cmdline */
static u32 nr_prealloc_entries = PREALLOC_DMA_DEBUG_ENTRIES;
-/* debugfs dentry's for the stuff above */
-static struct dentry *dma_debug_dent __read_mostly;
-static struct dentry *global_disable_dent __read_mostly;
-static struct dentry *error_count_dent __read_mostly;
-static struct dentry *show_all_errors_dent __read_mostly;
-static struct dentry *show_num_errors_dent __read_mostly;
-static struct dentry *num_free_entries_dent __read_mostly;
-static struct dentry *min_free_entries_dent __read_mostly;
-static struct dentry *nr_total_entries_dent __read_mostly;
-static struct dentry *filter_dent __read_mostly;
-
/* per-driver filter related state */
#define NAME_MAX_LEN 64
@@ -840,66 +829,46 @@ static const struct file_operations filter_fops = {
.llseek = default_llseek,
};
-static int dma_debug_fs_init(void)
+static int dump_show(struct seq_file *seq, void *v)
{
- dma_debug_dent = debugfs_create_dir("dma-api", NULL);
- if (!dma_debug_dent) {
- pr_err("can not create debugfs directory\n");
- return -ENOMEM;
- }
+ int idx;
- global_disable_dent = debugfs_create_bool("disabled", 0444,
- dma_debug_dent,
- &global_disable);
- if (!global_disable_dent)
- goto out_err;
-
- error_count_dent = debugfs_create_u32("error_count", 0444,
- dma_debug_dent, &error_count);
- if (!error_count_dent)
- goto out_err;
-
- show_all_errors_dent = debugfs_create_u32("all_errors", 0644,
- dma_debug_dent,
- &show_all_errors);
- if (!show_all_errors_dent)
- goto out_err;
-
- show_num_errors_dent = debugfs_create_u32("num_errors", 0644,
- dma_debug_dent,
- &show_num_errors);
- if (!show_num_errors_dent)
- goto out_err;
-
- num_free_entries_dent = debugfs_create_u32("num_free_entries", 0444,
- dma_debug_dent,
- &num_free_entries);
- if (!num_free_entries_dent)
- goto out_err;
-
- min_free_entries_dent = debugfs_create_u32("min_free_entries", 0444,
- dma_debug_dent,
- &min_free_entries);
- if (!min_free_entries_dent)
- goto out_err;
-
- nr_total_entries_dent = debugfs_create_u32("nr_total_entries", 0444,
- dma_debug_dent,
- &nr_total_entries);
- if (!nr_total_entries_dent)
- goto out_err;
-
- filter_dent = debugfs_create_file("driver_filter", 0644,
- dma_debug_dent, NULL, &filter_fops);
- if (!filter_dent)
- goto out_err;
+ for (idx = 0; idx < HASH_SIZE; idx++) {
+ struct hash_bucket *bucket = &dma_entry_hash[idx];
+ struct dma_debug_entry *entry;
+ unsigned long flags;
+ spin_lock_irqsave(&bucket->lock, flags);
+ list_for_each_entry(entry, &bucket->list, list) {
+ seq_printf(seq,
+ "%s %s %s idx %d P=%llx N=%lx D=%llx L=%llx %s %s\n",
+ dev_name(entry->dev),
+ dev_driver_string(entry->dev),
+ type2name[entry->type], idx,
+ phys_addr(entry), entry->pfn,
+ entry->dev_addr, entry->size,
+ dir2name[entry->direction],
+ maperr2str[entry->map_err_type]);
+ }
+ spin_unlock_irqrestore(&bucket->lock, flags);
+ }
return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(dump);
-out_err:
- debugfs_remove_recursive(dma_debug_dent);
-
- return -ENOMEM;
+static void dma_debug_fs_init(void)
+{
+ struct dentry *dentry = debugfs_create_dir("dma-api", NULL);
+
+ debugfs_create_bool("disabled", 0444, dentry, &global_disable);
+ debugfs_create_u32("error_count", 0444, dentry, &error_count);
+ debugfs_create_u32("all_errors", 0644, dentry, &show_all_errors);
+ debugfs_create_u32("num_errors", 0644, dentry, &show_num_errors);
+ debugfs_create_u32("num_free_entries", 0444, dentry, &num_free_entries);
+ debugfs_create_u32("min_free_entries", 0444, dentry, &min_free_entries);
+ debugfs_create_u32("nr_total_entries", 0444, dentry, &nr_total_entries);
+ debugfs_create_file("driver_filter", 0644, dentry, NULL, &filter_fops);
+ debugfs_create_file("dump", 0444, dentry, NULL, &dump_fops);
}
static int device_dma_allocations(struct device *dev, struct dma_debug_entry **out_entry)
@@ -985,12 +954,7 @@ static int dma_debug_init(void)
spin_lock_init(&dma_entry_hash[i].lock);
}
- if (dma_debug_fs_init() != 0) {
- pr_err("error creating debugfs entries - disabling\n");
- global_disable = true;
-
- return 0;
- }
+ dma_debug_fs_init();
nr_pages = DIV_ROUND_UP(nr_prealloc_entries, DMA_DEBUG_DYNAMIC_ENTRIES);
for (i = 0; i < nr_pages; ++i)
diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index d5bb51cf27c6..7ff807f2121c 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -355,6 +355,20 @@ out_unmap:
}
EXPORT_SYMBOL(dma_direct_map_sg);
+dma_addr_t dma_direct_map_resource(struct device *dev, phys_addr_t paddr,
+ size_t size, enum dma_data_direction dir, unsigned long attrs)
+{
+ dma_addr_t dma_addr = paddr;
+
+ if (unlikely(!dma_direct_possible(dev, dma_addr, size))) {
+ report_addr(dev, dma_addr, size);
+ return DMA_MAPPING_ERROR;
+ }
+
+ return dma_addr;
+}
+EXPORT_SYMBOL(dma_direct_map_resource);
+
/*
* Because 32-bit DMA masks are so common we expect every architecture to be
* able to satisfy them - either by not supporting more physical memory, or by
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 91ed81250fb3..bd62be80228e 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1654,42 +1654,6 @@ config PROVIDE_OHCI1394_DMA_INIT
See Documentation/debugging-via-ohci1394.txt for more information.
-config DMA_API_DEBUG
- bool "Enable debugging of DMA-API usage"
- select NEED_DMA_MAP_STATE
- help
- Enable this option to debug the use of the DMA API by device drivers.
- With this option you will be able to detect common bugs in device
- drivers like double-freeing of DMA mappings or freeing mappings that
- were never allocated.
-
- This also attempts to catch cases where a page owned by DMA is
- accessed by the cpu in a way that could cause data corruption. For
- example, this enables cow_user_page() to check that the source page is
- not undergoing DMA.
-
- This option causes a performance degradation. Use only if you want to
- debug device drivers and dma interactions.
-
- If unsure, say N.
-
-config DMA_API_DEBUG_SG
- bool "Debug DMA scatter-gather usage"
- default y
- depends on DMA_API_DEBUG
- help
- Perform extra checking that callers of dma_map_sg() have respected the
- appropriate segment length/boundary limits for the given device when
- preparing DMA scatterlists.
-
- This is particularly likely to have been overlooked in cases where the
- dma_map_sg() API is used for general bulk mapping of pages rather than
- preparing literal scatter-gather descriptors, where there is a risk of
- unexpected behaviour from DMA API implementations if the scatterlist
- is technically out-of-spec.
-
- If unsure, say N.
-
menuconfig RUNTIME_TESTING_MENU
bool "Runtime Testing"
def_bool y