summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio7
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-frequency-adf437144
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml63
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adxl372.txt33
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt75
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml155
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt48
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml87
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt12
-rw-r--r--Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml39
-rw-r--r--Documentation/devicetree/bindings/iio/frequency/adf4371.yaml63
-rw-r--r--Documentation/iio/ep93xx_adc.rst (renamed from Documentation/iio/ep93xx_adc.txt)15
-rw-r--r--Documentation/iio/iio_configfs.rst (renamed from Documentation/iio/iio_configfs.txt)52
-rw-r--r--Documentation/iio/index.rst12
-rw-r--r--MAINTAINERS38
-rw-r--r--drivers/counter/ftm-quaddec.c4
-rw-r--r--drivers/iio/Kconfig2
-rw-r--r--drivers/iio/accel/adis16201.c4
-rw-r--r--drivers/iio/accel/adis16209.c4
-rw-r--r--drivers/iio/accel/adxl372.c27
-rw-r--r--drivers/iio/accel/kxcjk-1013.c1
-rw-r--r--drivers/iio/accel/sca3000.c7
-rw-r--r--drivers/iio/accel/st_accel_buffer.c22
-rw-r--r--drivers/iio/adc/Kconfig1
-rw-r--r--drivers/iio/adc/ad7124.c33
-rw-r--r--drivers/iio/adc/ad7606.c97
-rw-r--r--drivers/iio/adc/ad7606.h17
-rw-r--r--drivers/iio/adc/ad_sigma_delta.c3
-rw-r--r--drivers/iio/adc/imx7d_adc.c24
-rw-r--r--drivers/iio/adc/meson_saradc.c2
-rw-r--r--drivers/iio/adc/stm32-adc-core.c21
-rw-r--r--drivers/iio/adc/stm32-dfsdm-adc.c233
-rw-r--r--drivers/iio/adc/stm32-dfsdm.h24
-rw-r--r--drivers/iio/amplifiers/Kconfig13
-rw-r--r--drivers/iio/amplifiers/ad8366.c146
-rw-r--r--drivers/iio/frequency/Kconfig10
-rw-r--r--drivers/iio/frequency/Makefile1
-rw-r--r--drivers/iio/frequency/adf4371.c632
-rw-r--r--drivers/iio/humidity/dht11.c28
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h9
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c53
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c3
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c3
-rw-r--r--drivers/iio/industrialio-core.c37
-rw-r--r--drivers/iio/light/bh1780.c2
-rw-r--r--drivers/iio/light/stk3310.c6
-rw-r--r--drivers/iio/pressure/Kconfig11
-rw-r--r--drivers/iio/pressure/Makefile1
-rw-r--r--drivers/iio/pressure/dps310.c827
-rw-r--r--drivers/staging/iio/accel/adis16203.c12
-rw-r--r--drivers/staging/iio/accel/adis16240.c9
-rw-r--r--drivers/staging/iio/addac/adt7316-spi.c13
-rw-r--r--drivers/staging/iio/cdc/ad7150.c58
-rw-r--r--drivers/staging/iio/cdc/ad7746.c10
-rw-r--r--drivers/staging/iio/frequency/ad9834.c11
-rw-r--r--drivers/staging/iio/resolver/ad2s1210.c3
-rw-r--r--tools/iio/iio_utils.c4
58 files changed, 2705 insertions, 467 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 6aef7dbbde44..680451695422 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -61,8 +61,11 @@ What: /sys/bus/iio/devices/triggerX/sampling_frequency_available
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
- When the internal sampling clock can only take a small
- discrete set of values, this file lists those available.
+ When the internal sampling clock can only take a specific set of
+ frequencies, we can specify the available values with:
+ - a small discrete set of values like "0 2 4 6 8"
+ - a range with minimum, step and maximum frequencies like
+ "[min step max]"
What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio
KernelVersion: 2.6.38
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
new file mode 100644
index 000000000000..302de64cb424
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
@@ -0,0 +1,44 @@
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ Stores the PLL frequency in Hz for channel Y.
+ Reading returns the actual frequency in Hz.
+ The ADF4371 has an integrated VCO with fundamendal output
+ frequency ranging from 4000000000 Hz 8000000000 Hz.
+
+ out_altvoltage0_frequency:
+ A divide by 1, 2, 4, 8, 16, 32 or circuit generates
+ frequencies from 62500000 Hz to 8000000000 Hz.
+ out_altvoltage1_frequency:
+ This channel duplicates the channel 0 frequency
+ out_altvoltage2_frequency:
+ A frequency doubler generates frequencies from
+ 8000000000 Hz to 16000000000 Hz.
+ out_altvoltage3_frequency:
+ A frequency quadrupler generates frequencies from
+ 16000000000 Hz to 32000000000 Hz.
+
+ Note: writes to one of the channels will affect the frequency of
+ all the other channels, since it involves changing the VCO
+ fundamental output frequency.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reading returns the datasheet name for channel Y:
+
+ out_altvoltage0_name: RF8x
+ out_altvoltage1_name: RFAUX8x
+ out_altvoltage2_name: RF16x
+ out_altvoltage3_name: RF32x
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute allows the user to power down the PLL and it's
+ RFOut buffers.
+ Writing 1 causes the specified channel to power down.
+ Clearing returns to normal operation.
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
new file mode 100644
index 000000000000..a7fafb9bf5c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
+
+maintainers:
+ - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+ Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
+ both I2C & SPI interfaces
+ https://www.analog.com/en/products/adxl372.html
+
+properties:
+ compatible:
+ enum:
+ - adi,adxl372
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Example for a I2C device node */
+ accelerometer@53 {
+ compatible = "adi,adxl372";
+ reg = <0x53>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ accelerometer@0 {
+ compatible = "adi,adxl372";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
deleted file mode 100644
index a289964756a7..000000000000
--- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
-
-http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
-
-Required properties:
- - compatible : should be "adi,adxl372"
- - reg: the I2C address or SPI chip select number for the device
-
-Required properties for SPI bus usage:
- - spi-max-frequency: Max SPI frequency to use
-
-Optional properties:
- - interrupts: interrupt mapping for IRQ as documented in
- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example for a I2C device node:
-
- accelerometer@53 {
- compatible = "adi,adxl372";
- reg = <0x53>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- };
-
-Example for a SPI device node:
-
- accelerometer@0 {
- compatible = "adi,adxl372";
- reg = <0>;
- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
deleted file mode 100644
index 416273dce569..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Analog Devices AD7124 ADC device driver
-
-Required properties for the AD7124:
- - compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8"
- - reg: SPI chip select number for the device
- - spi-max-frequency: Max SPI frequency to use
- see: Documentation/devicetree/bindings/spi/spi-bus.txt
- - clocks: phandle to the master clock (mclk)
- see: Documentation/devicetree/bindings/clock/clock-bindings.txt
- - clock-names: Must be "mclk".
- - interrupts: IRQ line for the ADC
- see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
- Required properties:
- * #address-cells: Must be 1.
- * #size-cells: Must be 0.
-
- Subnode(s) represent the external channels which are connected to the ADC.
- Each subnode represents one channel and has the following properties:
- Required properties:
- * reg: The channel number. It can have up to 4 channels on ad7124-4
- and 8 channels on ad7124-8, numbered from 0 to 15.
- * diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt
-
- Optional properties:
- * bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt
- * adi,reference-select: Select the reference source to use when
- converting on the the specific channel. Valid values are:
- 0: REFIN1(+)/REFIN1(−).
- 1: REFIN2(+)/REFIN2(−).
- 3: AVDD
- If this field is left empty, internal reference is selected.
-
-Optional properties:
- - refin1-supply: refin1 supply can be used as reference for conversion.
- - refin2-supply: refin2 supply can be used as reference for conversion.
- - avdd-supply: avdd supply can be used as reference for conversion.
-
-Example:
- adc@0 {
- compatible = "adi,ad7124-4";
- reg = <0>;
- spi-max-frequency = <5000000>;
- interrupts = <25 2>;
- interrupt-parent = <&gpio>;
- refin1-supply = <&adc_vref>;
- clocks = <&ad7124_mclk>;
- clock-names = "mclk";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- channel@0 {
- reg = <0>;
- diff-channels = <0 1>;
- adi,reference-select = <0>;
- };
-
- channel@1 {
- reg = <1>;
- bipolar;
- diff-channels = <2 3>;
- adi,reference-select = <0>;
- };
-
- channel@2 {
- reg = <2>;
- diff-channels = <4 5>;
- };
-
- channel@3 {
- reg = <3>;
- diff-channels = <6 7>;
- };
- };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
new file mode 100644
index 000000000000..cf494a08b837
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7124 ADC device driver
+
+maintainers:
+ - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+ Bindings for the Analog Devices AD7124 ADC device. Datasheet can be
+ found here:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad7124-4
+ - adi,ad7124-8
+
+ reg:
+ description: SPI chip select number for the device
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: phandle to the master clock (mclk)
+
+ clock-names:
+ items:
+ - const: mclk
+
+ interrupts:
+ description: IRQ line for the ADC
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ refin1-supply:
+ description: refin1 supply can be used as reference for conversion.
+ maxItems: 1
+
+ refin2-supply:
+ description: refin2 supply can be used as reference for conversion.
+ maxItems: 1
+
+ avdd-supply:
+ description: avdd supply can be used as reference for conversion.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+patternProperties:
+ "^channel@([0-9]|1[0-5])$":
+ type: object
+ description: |
+ Represents the external channels which are connected to the ADC.
+ See Documentation/devicetree/bindings/iio/adc/adc.txt.
+
+ properties:
+ reg:
+ description: |
+ The channel number. It can have up to 8 channels on ad7124-4
+ and 16 channels on ad7124-8, numbered from 0 to 15.
+ items:
+ minimum: 0
+ maximum: 15
+
+ adi,reference-select:
+ description: |
+ Select the reference source to use when converting on
+ the specific channel. Valid values are:
+ 0: REFIN1(+)/REFIN1(−).
+ 1: REFIN2(+)/REFIN2(−).
+ 3: AVDD
+ If this field is left empty, internal reference is selected.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [0, 1, 3]
+
+ diff-channels:
+ description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+ items:
+ minimum: 0
+ maximum: 15
+
+ bipolar:
+ description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+ type: boolean
+
+ adi,buffered-positive:
+ description: Enable buffered mode for positive input.
+ type: boolean
+
+ adi,buffered-negative:
+ description: Enable buffered mode for negative input.
+ type: boolean
+
+ required:
+ - reg
+ - diff-channels
+
+examples:
+ - |
+ adc@0 {
+ compatible = "adi,ad7124-4";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ interrupts = <25 2>;
+ interrupt-parent = <&gpio>;
+ refin1-supply = <&adc_vref>;
+ clocks = <&ad7124_mclk>;
+ clock-names = "mclk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ diff-channels = <0 1>;
+ adi,reference-select = <0>;
+ adi,buffered-positive;
+ };
+
+ channel@1 {
+ reg = <1>;
+ bipolar;
+ diff-channels = <2 3>;
+ adi,reference-select = <0>;
+ adi,buffered-positive;
+ adi,buffered-negative;
+ };
+
+ channel@2 {
+ reg = <2>;
+ diff-channels = <4 5>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ diff-channels = <6 7>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
deleted file mode 100644
index 440e52555349..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Analog Devices AD7170/AD7171/AD7780/AD7781
-
-Data sheets:
-
-- AD7170:
- * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
-- AD7171:
- * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
-- AD7780:
- * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
-- AD7781:
- * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
-
-Required properties:
-
-- compatible: should be one of
- * "adi,ad7170"
- * "adi,ad7171"
- * "adi,ad7780"
- * "adi,ad7781"
-- reg: spi chip select number for the device
-- vref-supply: the regulator supply for the ADC reference voltage
-
-Optional properties:
-
-- powerdown-gpios: must be the device tree identifier of the PDRST pin. If
- specified, it will be asserted during driver probe. As the
- line is active high, it should be marked GPIO_ACTIVE_HIGH.
-- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for
- the ad778x chips. If specified, it will be asserted during
- driver probe. As the line is active low, it should be marked
- GPIO_ACTIVE_LOW.
-- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only
- for the ad778x chips. If specified, it will be asserted
- during driver probe. As the line is active low, it should be
- marked GPIO_ACTIVE_LOW.
-
-Example:
-
-adc@0 {
- compatible = "adi,ad7780";
- reg = <0>;
- vref-supply = <&vdd_supply>
-
- powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
- adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
new file mode 100644
index 000000000000..d1109416963c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+ The ad7780 is a sigma-delta analog to digital converter. This driver provides
+ reading voltage values and status bits from both the ad778x and ad717x series.
+ Its interface also allows writing on the FILTER and GAIN GPIO pins on the
+ ad778x.
+
+ Specifications on the converters can be found at:
+ AD7170:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
+ AD7171:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
+ AD7780:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
+ AD7781:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad7170
+ - adi,ad7171
+ - adi,ad7780
+ - adi,ad7781
+
+ reg:
+ maxItems: 1
+
+ avdd-supply:
+ description:
+ The regulator supply for the ADC reference voltage.
+ maxItems: 1
+
+ powerdown-gpios:
+ description:
+ Must be the device tree identifier of the PDRST pin. If
+ specified, it will be asserted during driver probe. As the
+ line is active high, it should be marked GPIO_ACTIVE_HIGH.
+ maxItems: 1
+
+ adi,gain-gpios:
+ description:
+ Must be the device tree identifier of the GAIN pin. Only for
+ the ad778x chips. If specified, it will be asserted during
+ driver probe. As the line is active low, it should be marked
+ GPIO_ACTIVE_LOW.
+ maxItems: 1
+
+ adi,filter-gpios:
+ description:
+ Must be the device tree identifier of the FILTER pin. Only
+ for the ad778x chips. If specified, it will be asserted
+ during driver probe. As the line is active low, it should be
+ marked GPIO_ACTIVE_LOW.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad7780";
+ reg = <0>;
+
+ avdd-supply = <&vdd_supply>;
+ powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 8346bcb04ad7..93a0bd2efc05 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -38,6 +38,7 @@ Required properties:
It's required on stm32h7.
- clock-names: Must be "adc" and/or "bus" depending on part used.
- interrupt-controller: Identifies the controller node as interrupt-parent
+- vdda-supply: Phandle to the vdda input analog voltage.
- vref-supply: Phandle to the vref input analog reference voltage.
- #interrupt-cells = <1>;
- #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt
deleted file mode 100644
index 6eee2709b5b6..000000000000
--- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* Sensirion SPS30 particulate matter sensor
-
-Required properties:
-- compatible: must be "sensirion,sps30"
-- reg: the I2C address of the sensor
-
-Example:
-
-sps30@69 {
- compatible = "sensirion,sps30";
- reg = <0x69>;
-};
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
new file mode 100644
index 000000000000..50a50a0d7070
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,sps30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SPS30 particulate matter sensor
+
+maintainers:
+ - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+ Air pollution sensor capable of measuring mass concentration of dust
+ particles.
+
+properties:
+ compatible:
+ enum:
+ - sensirion,sps30
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ air-pollution-sensor@69 {
+ compatible = "sensirion,sps30";
+ reg = <0x69>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
new file mode 100644
index 000000000000..7ec3ec94356b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adf4371.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADF4371/ADF4372 Wideband Synthesizers
+
+maintainers:
+ - Popa Stefan <stefan.popa@analog.com>
+
+description: |
+ Analog Devices ADF4371/ADF4372 SPI Wideband Synthesizers
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adf4371.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,adf4371
+ - adi,adf4372
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description:
+ Definition of the external clock (see clock/clock-bindings.txt)
+ maxItems: 1
+
+ clock-names:
+ description:
+ Must be "clkin"
+ maxItems: 1
+
+ adi,mute-till-lock-en:
+ type: boolean
+ description:
+ If this property is present, then the supply current to RF8P and RF8N
+ output stage will shut down until the ADF4371/ADF4372 achieves lock as
+ measured by the digital lock detect circuitry.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ frequency@0 {
+ compatible = "adi,adf4371";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ clocks = <&adf4371_clkin>;
+ clock-names = "clkin";
+ };
+ };
+...
diff --git a/Documentation/iio/ep93xx_adc.txt b/Documentation/iio/ep93xx_adc.rst
index 23053e7817bd..4fd8dea3f6b8 100644
--- a/Documentation/iio/ep93xx_adc.txt
+++ b/Documentation/iio/ep93xx_adc.rst
@@ -1,12 +1,16 @@
-Cirrus Logic EP93xx ADC driver.
+==============================
+Cirrus Logic EP93xx ADC driver
+==============================
1. Overview
+===========
The driver is intended to work on both low-end (EP9301, EP9302) devices with
5-channel ADC and high-end (EP9307, EP9312, EP9315) devices with 10-channel
touchscreen/ADC module.
2. Channel numbering
+====================
Numbering scheme for channels 0..4 is defined in EP9301 and EP9302 datasheets.
EP9307, EP9312 and EP9312 have 3 channels more (total 8), but the numbering is
@@ -17,13 +21,20 @@ Assuming ep93xx_adc is IIO device0, you'd find the following entries under
+-----------------+---------------+
| sysfs entry | ball/pin name |
- +-----------------+---------------+
+ +=================+===============+
| in_voltage0_raw | YM |
+ +-----------------+---------------+
| in_voltage1_raw | SXP |
+ +-----------------+---------------+
| in_voltage2_raw | SXM |
+ +-----------------+---------------+
| in_voltage3_raw | SYP |
+ +-----------------+---------------+
| in_voltage4_raw | SYM |
+ +-----------------+---------------+
| in_voltage5_raw | XP |
+ +-----------------+---------------+
| in_voltage6_raw | XM |
+ +-----------------+---------------+
| in_voltage7_raw | YP |
+-----------------+---------------+
diff --git a/Documentation/iio/iio_configfs.txt b/Documentation/iio/iio_configfs.rst
index 4e5f101837a8..ecbfdb3afef7 100644
--- a/Documentation/iio/iio_configfs.txt
+++ b/Documentation/iio/iio_configfs.rst
@@ -1,6 +1,9 @@
+===============================
Industrial IIO configfs support
+===============================
1. Overview
+===========
Configfs is a filesystem-based manager of kernel objects. IIO uses some
objects that could be easily configured using configfs (e.g.: devices,
@@ -10,20 +13,22 @@ See Documentation/filesystems/configfs/configfs.txt for more information
about how configfs works.
2. Usage
+========
In order to use configfs support in IIO we need to select it at compile
time via CONFIG_IIO_CONFIGFS config option.
-Then, mount the configfs filesystem (usually under /config directory):
+Then, mount the configfs filesystem (usually under /config directory)::
-$ mkdir /config
-$ mount -t configfs none /config
+ $ mkdir /config
+ $ mount -t configfs none /config
At this point, all default IIO groups will be created and can be accessed
under /config/iio. Next chapters will describe available IIO configuration
objects.
3. Software triggers
+====================
One of the IIO default configfs groups is the "triggers" group. It is
automagically accessible when the configfs is mounted and can be found
@@ -31,40 +36,40 @@ under /config/iio/triggers.
IIO software triggers implementation offers support for creating multiple
trigger types. A new trigger type is usually implemented as a separate
-kernel module following the interface in include/linux/iio/sw_trigger.h:
+kernel module following the interface in include/linux/iio/sw_trigger.h::
-/*
- * drivers/iio/trigger/iio-trig-sample.c
- * sample kernel module implementing a new trigger type
- */
-#include <linux/iio/sw_trigger.h>
+ /*
+ * drivers/iio/trigger/iio-trig-sample.c
+ * sample kernel module implementing a new trigger type
+ */
+ #include <linux/iio/sw_trigger.h>
-static struct iio_sw_trigger *iio_trig_sample_probe(const char *name)
-{
+ static struct iio_sw_trigger *iio_trig_sample_probe(const char *name)
+ {
/*
* This allocates and registers an IIO trigger plus other
* trigger type specific initialization.
*/
-}
+ }
-static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
-{
+ static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
+ {
/*
* This undoes the actions in iio_trig_sample_probe
*/
-}
+ }
-static const struct iio_sw_trigger_ops iio_trig_sample_ops = {
+ static const struct iio_sw_trigger_ops iio_trig_sample_ops = {
.probe = iio_trig_sample_probe,
.remove = iio_trig_sample_remove,
-};
+ };
-static struct iio_sw_trigger_type iio_trig_sample = {
+ static struct iio_sw_trigger_type iio_trig_sample = {
.name = "trig-sample",
.owner = THIS_MODULE,
.ops = &iio_trig_sample_ops,
-};
+ };
module_iio_sw_trigger_driver(iio_trig_sample);
@@ -73,21 +78,24 @@ iio-trig-sample module will create 'trig-sample' trigger type directory
/config/iio/triggers/trig-sample.
We support the following interrupt sources (trigger types):
+
* hrtimer, uses high resolution timers as interrupt source
3.1 Hrtimer triggers creation and destruction
+---------------------------------------------
Loading iio-trig-hrtimer module will register hrtimer trigger types allowing
users to create hrtimer triggers under /config/iio/triggers/hrtimer.
-e.g:
+e.g::
-$ mkdir /config/iio/triggers/hrtimer/instance1
-$ rmdir /config/iio/triggers/hrtimer/instance1
+ $ mkdir /config/iio/triggers/hrtimer/instance1
+ $ rmdir /config/iio/triggers/hrtimer/instance1
Each trigger can have one or more attributes specific to the trigger type.
3.2 "hrtimer" trigger types attributes
+--------------------------------------
"hrtimer" trigger type doesn't have any configurable attribute from /config dir.
It does introduce the sampling_frequency attribute to trigger directory.
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
new file mode 100644
index 000000000000..0593dca89a94
--- /dev/null
+++ b/Documentation/iio/index.rst
@@ -0,0 +1,12 @@
+:orphan:
+
+==============
+Industrial I/O
+==============
+
+.. toctree::
+ :maxdepth: 1
+
+ iio_configfs
+
+ ep93xx_adc
diff --git a/MAINTAINERS b/MAINTAINERS
index aab4f97b5b2f..c0a02dccc869 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -560,7 +560,7 @@ S: Supported
F: drivers/iio/accel/adxl372.c
F: drivers/iio/accel/adxl372_spi.c
F: drivers/iio/accel/adxl372_i2c.c
-F: Documentation/devicetree/bindings/iio/accel/adxl372.txt
+F: Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
AF9013 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
@@ -910,6 +910,15 @@ S: Supported
F: drivers/iio/adc/ad7768-1.c
F: Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
+ANALOG DEVICES INC AD7780 DRIVER
+M: Michael Hennerich <Michael.Hennerich@analog.com>
+M: Renato Lui Geh <renatogeh@gmail.com>
+L: linux-iio@vger.kernel.org
+W: http://ez.analog.com/community/linux-device-drivers
+S: Supported
+F: drivers/iio/adc/ad7780.c
+F: Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+
ANALOG DEVICES INC AD9389B DRIVER
M: Hans Verkuil <hans.verkuil@cisco.com>
L: linux-media@vger.kernel.org
@@ -922,6 +931,13 @@ S: Supported
F: drivers/mux/adgs1408.c
F: Documentation/devicetree/bindings/mux/adi,adgs1408.txt
+ANALOG DEVICES INC ADIS DRIVER LIBRARY
+M: Alexandru Ardelean <alexandru.ardelean@analog.com>
+S: Supported
+L: linux-iio@vger.kernel.org
+F: include/linux/iio/imu/adis.h
+F: drivers/iio/imu/adis.c
+
ANALOG DEVICES INC ADP5061 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
L: linux-pm@vger.kernel.org
@@ -6219,6 +6235,14 @@ M: Philip Kelleher <pjk1939@linux.ibm.com>
S: Maintained
F: drivers/block/rsxx/
+FLEXTIMER FTM-QUADDEC DRIVER
+M: Patrick Havelange <patrick.havelange@essensium.com>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: Documentation/ABI/testing/sysfs-bus-counter-ftm-quadddec
+F: Documentation/devicetree/bindings/counter/ftm-quaddec.txt
+F: drivers/counter/ftm-quaddec.c
+
FLOPPY DRIVER
M: Jiri Kosina <jikos@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
@@ -7773,6 +7797,12 @@ W: http://industrypack.sourceforge.net
S: Maintained
F: drivers/ipack/
+INFINEON DPS310 Driver
+M: Eddie James <eajames@linux.ibm.com>
+L: linux-iio@vger.kernel.org
+F: drivers/iio/pressure/dps310.c
+S: Maintained
+
INFINIBAND SUBSYSTEM
M: Doug Ledford <dledford@redhat.com>
M: Jason Gunthorpe <jgg@mellanox.com>
@@ -14161,6 +14191,12 @@ S: Maintained
F: drivers/misc/phantom.c
F: include/uapi/linux/phantom.h
+SENSIRION SPS30 AIR POLLUTION SENSOR DRIVER
+M: Tomasz Duszynski <tduszyns@gmail.com>
+S: Maintained
+F: drivers/iio/chemical/sps30.c
+F: Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
+
SERIAL DEVICE BUS
M: Rob Herring <robh@kernel.org>
L: linux-serial@vger.kernel.org
diff --git a/drivers/counter/ftm-quaddec.c b/drivers/counter/ftm-quaddec.c
index c83c8875bf82..68a9b7393457 100644
--- a/drivers/counter/ftm-quaddec.c
+++ b/drivers/counter/ftm-quaddec.c
@@ -352,5 +352,5 @@ static struct platform_driver ftm_quaddec_driver = {
module_platform_driver(ftm_quaddec_driver);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kjeld Flarup <kfa@deif.com");
-MODULE_AUTHOR("Patrick Havelange <patrick.havelange@essensium.com");
+MODULE_AUTHOR("Kjeld Flarup <kfa@deif.com>");
+MODULE_AUTHOR("Patrick Havelange <patrick.havelange@essensium.com>");
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 1d736a4952ab..5bd51853b15e 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -28,7 +28,7 @@ config IIO_CONFIGFS
help
This allows configuring various IIO bits through configfs
(e.g. software triggers). For more info see
- Documentation/iio/iio_configfs.txt.
+ Documentation/iio/iio_configfs.rst.
config IIO_TRIGGER
bool "Enable triggered sampling support"
diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c
index 0af4b289fc63..c4810c73b2a2 100644
--- a/drivers/iio/accel/adis16201.c
+++ b/drivers/iio/accel/adis16201.c
@@ -70,7 +70,7 @@
#define ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT 2
/* Power supply above 3.625 V */
#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
-/* Power supply below 3.15 V */
+/* Power supply below 2.975 V */
#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
/* System Command Register Definition */
@@ -230,7 +230,7 @@ static const char * const adis16201_status_error_msgs[] = {
[ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
[ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
- [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+ [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
};
static const struct adis_data adis16201_data = {
diff --git a/drivers/iio/accel/adis16209.c b/drivers/iio/accel/adis16209.c
index 40be7adfa1f2..98d77af8a2b0 100644
--- a/drivers/iio/accel/adis16209.c
+++ b/drivers/iio/accel/adis16209.c
@@ -72,7 +72,7 @@
#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
/* Power supply above 3.625 V */
#define ADIS16209_STAT_POWER_HIGH_BIT 1
-/* Power supply below 3.15 V */
+/* Power supply below 2.975 V */
#define ADIS16209_STAT_POWER_LOW_BIT 0
#define ADIS16209_CMD_REG 0x3E
@@ -240,7 +240,7 @@ static const char * const adis16209_status_error_msgs[] = {
[ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
[ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
- [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+ [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
};
static const struct adis_data adis16209_data = {
diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index 3b84cb243a87..055227cb3d43 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -782,10 +782,14 @@ static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
unsigned int mask;
int i, ret;
- ret = adxl372_set_interrupts(st, ADXL372_INT1_MAP_FIFO_FULL_MSK, 0);
+ ret = iio_triggered_buffer_postenable(indio_dev);
if (ret < 0)
return ret;
+ ret = adxl372_set_interrupts(st, ADXL372_INT1_MAP_FIFO_FULL_MSK, 0);
+ if (ret < 0)
+ goto err;
+
mask = *indio_dev->active_scan_mask;
for (i = 0; i < ARRAY_SIZE(adxl372_axis_lookup_table); i++) {
@@ -793,8 +797,10 @@ static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
break;
}
- if (i == ARRAY_SIZE(adxl372_axis_lookup_table))
- return -EINVAL;
+ if (i == ARRAY_SIZE(adxl372_axis_lookup_table)) {
+ ret = -EINVAL;
+ goto err;
+ }
st->fifo_format = adxl372_axis_lookup_table[i].fifo_format;
st->fifo_set_size = bitmap_weight(indio_dev->active_scan_mask,
@@ -814,26 +820,25 @@ static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
if (ret < 0) {
st->fifo_mode = ADXL372_FIFO_BYPASSED;
adxl372_set_interrupts(st, 0, 0);
- return ret;
+ goto err;
}
- return iio_triggered_buffer_postenable(indio_dev);
+ return 0;
+
+err:
+ iio_triggered_buffer_predisable(indio_dev);
+ return ret;
}
static int adxl372_buffer_predisable(struct iio_dev *indio_dev)
{
struct adxl372_state *st = iio_priv(indio_dev);
- int ret;
-
- ret = iio_triggered_buffer_predisable(indio_dev);
- if (ret < 0)
- return ret;
adxl372_set_interrupts(st, 0, 0);
st->fifo_mode = ADXL372_FIFO_BYPASSED;
adxl372_configure_fifo(st);
- return 0;
+ return iio_triggered_buffer_predisable(indio_dev);
}
static const struct iio_buffer_setup_ops adxl372_buffer_ops = {
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index e589f64eab9d..6645771aa349 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1487,6 +1487,7 @@ static const struct acpi_device_id kx_acpi_match[] = {
{"KIOX0009", KXTJ21009},
{"KIOX000A", KXCJ91008},
{"KIOX010A", KXCJ91008}, /* KXCJ91008 inside the display of a 2-in-1 */
+ {"KIOX020A", KXCJ91008},
{"KXTJ1009", KXTJ21009},
{"KXJ2109", KXTJ21009},
{"SMO8500", KXCJ91008},
diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
index 274ce2f8bddf..a923f90f6e80 100644
--- a/drivers/iio/accel/sca3000.c
+++ b/drivers/iio/accel/sca3000.c
@@ -869,8 +869,9 @@ static int sca3000_read_event_value(struct iio_dev *indio_dev,
enum iio_event_info info,
int *val, int *val2)
{
- int ret, i;
struct sca3000_state *st = iio_priv(indio_dev);
+ long ret;
+ int i;
switch (info) {
case IIO_EV_INFO_VALUE:
@@ -882,11 +883,11 @@ static int sca3000_read_event_value(struct iio_dev *indio_dev,
return ret;
*val = 0;
if (chan->channel2 == IIO_MOD_Y)
- for_each_set_bit(i, (unsigned long *)&ret,
+ for_each_set_bit(i, &ret,
ARRAY_SIZE(st->info->mot_det_mult_y))
*val += st->info->mot_det_mult_y[i];
else
- for_each_set_bit(i, (unsigned long *)&ret,
+ for_each_set_bit(i, &ret,
ARRAY_SIZE(st->info->mot_det_mult_xz))
*val += st->info->mot_det_mult_xz[i];
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index 54f2ae91f614..0205c0167cdd 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -45,17 +45,19 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
goto allocate_memory_error;
}
- err = st_sensors_set_axis_enable(indio_dev,
- (u8)indio_dev->active_scan_mask[0]);
+ err = iio_triggered_buffer_postenable(indio_dev);
if (err < 0)
goto st_accel_buffer_postenable_error;
- err = iio_triggered_buffer_postenable(indio_dev);
+ err = st_sensors_set_axis_enable(indio_dev,
+ (u8)indio_dev->active_scan_mask[0]);
if (err < 0)
- goto st_accel_buffer_postenable_error;
+ goto st_sensors_set_axis_enable_error;
return err;
+st_sensors_set_axis_enable_error:
+ iio_triggered_buffer_predisable(indio_dev);
st_accel_buffer_postenable_error:
kfree(adata->buffer_data);
allocate_memory_error:
@@ -64,20 +66,22 @@ allocate_memory_error:
static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
{
- int err;
+ int err, err2;
struct st_sensor_data *adata = iio_priv(indio_dev);
- err = iio_triggered_buffer_predisable(indio_dev);
- if (err < 0)
- goto st_accel_buffer_predisable_error;
-
err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
if (err < 0)
goto st_accel_buffer_predisable_error;
err = st_sensors_set_enable(indio_dev, false);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
st_accel_buffer_predisable_error:
+ err2 = iio_triggered_buffer_predisable(indio_dev);
+ if (!err)
+ err = err2;
+
kfree(adata->buffer_data);
return err;
}
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index f96a7702b020..7e3286265a38 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1085,7 +1085,6 @@ config VIPERBOARD_ADC
config XILINX_XADC
tristate "Xilinx XADC driver"
- depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
depends on HAS_IOMEM
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 659ef37d5fe8..edc6f1cc90b2 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -61,6 +61,8 @@
#define AD7124_CONFIG_REF_SEL(x) FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x)
#define AD7124_CONFIG_PGA_MSK GENMASK(2, 0)
#define AD7124_CONFIG_PGA(x) FIELD_PREP(AD7124_CONFIG_PGA_MSK, x)
+#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(7, 6)
+#define AD7124_CONFIG_IN_BUFF(x) FIELD_PREP(AD7124_CONFIG_IN_BUFF_MSK, x)
/* AD7124_FILTER_X */
#define AD7124_FILTER_FS_MSK GENMASK(10, 0)
@@ -108,6 +110,8 @@ struct ad7124_chip_info {
struct ad7124_channel_config {
enum ad7124_ref_sel refsel;
bool bipolar;
+ bool buf_positive;
+ bool buf_negative;
unsigned int ain;
unsigned int vref_mv;
unsigned int pga_bits;
@@ -117,7 +121,7 @@ struct ad7124_channel_config {
struct ad7124_state {
const struct ad7124_chip_info *chip_info;
struct ad_sigma_delta sd;
- struct ad7124_channel_config channel_config[4];
+ struct ad7124_channel_config *channel_config;
struct regulator *vref[4];
struct clk *mclk;
unsigned int adc_control;
@@ -435,6 +439,7 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
struct ad7124_state *st = iio_priv(indio_dev);
struct device_node *child;
struct iio_chan_spec *chan;
+ struct ad7124_channel_config *chan_config;
unsigned int ain[2], channel = 0, tmp;
int ret;
@@ -449,8 +454,14 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
if (!chan)
return -ENOMEM;
+ chan_config = devm_kcalloc(indio_dev->dev.parent, st->num_channels,
+ sizeof(*chan_config), GFP_KERNEL);
+ if (!chan_config)
+ return -ENOMEM;
+
indio_dev->channels = chan;
indio_dev->num_channels = st->num_channels;
+ st->channel_config = chan_config;
for_each_available_child_of_node(np, child) {
ret = of_property_read_u32(child, "reg", &channel);
@@ -462,13 +473,6 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
if (ret)
goto err;
- if (ain[0] >= st->chip_info->num_inputs ||
- ain[1] >= st->chip_info->num_inputs) {
- dev_err(indio_dev->dev.parent,
- "Input pin number out of range.\n");
- ret = -EINVAL;
- goto err;
- }
st->channel_config[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
AD7124_CHANNEL_AINM(ain[1]);
st->channel_config[channel].bipolar =
@@ -480,6 +484,11 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
else
st->channel_config[channel].refsel = tmp;
+ st->channel_config[channel].buf_positive =
+ of_property_read_bool(child, "adi,buffered-positive");
+ st->channel_config[channel].buf_negative =
+ of_property_read_bool(child, "adi,buffered-negative");
+
*chan = ad7124_channel_template;
chan->address = channel;
chan->scan_index = channel;
@@ -499,7 +508,7 @@ err:
static int ad7124_setup(struct ad7124_state *st)
{
unsigned int val, fclk, power_mode;
- int i, ret;
+ int i, ret, tmp;
fclk = clk_get_rate(st->mclk);
if (!fclk)
@@ -532,8 +541,12 @@ static int ad7124_setup(struct ad7124_state *st)
if (ret < 0)
return ret;
+ tmp = (st->channel_config[i].buf_positive << 1) +
+ st->channel_config[i].buf_negative;
+
val = AD7124_CONFIG_BIPOLAR(st->channel_config[i].bipolar) |
- AD7124_CONFIG_REF_SEL(st->channel_config[i].refsel);
+ AD7124_CONFIG_REF_SEL(st->channel_config[i].refsel) |
+ AD7124_CONFIG_IN_BUFF(tmp);
ret = ad_sd_write_reg(&st->sd, AD7124_CONFIG(i), 2, val);
if (ret < 0)
return ret;
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index 24c70c3cefb4..aba0fd123a51 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -140,7 +140,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
int *val2,
long m)
{
- int ret;
+ int ret, ch = 0;
struct ad7606_state *st = iio_priv(indio_dev);
switch (m) {
@@ -157,8 +157,10 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
*val = (short)ret;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
+ if (st->sw_mode_en)
+ ch = chan->address;
*val = 0;
- *val2 = st->scale_avail[st->range];
+ *val2 = st->scale_avail[st->range[ch]];
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
*val = st->oversampling;
@@ -194,6 +196,32 @@ static ssize_t in_voltage_scale_available_show(struct device *dev,
static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
+static int ad7606_write_scale_hw(struct iio_dev *indio_dev, int ch, int val)
+{
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ gpiod_set_value(st->gpio_range, val);
+
+ return 0;
+}
+
+static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val)
+{
+ struct ad7606_state *st = iio_priv(indio_dev);
+ DECLARE_BITMAP(values, 3);
+
+ values[0] = val;
+
+ gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
+ st->gpio_os->info, values);
+
+ /* AD7616 requires a reset to update value */
+ if (st->chip_info->os_req_reset)
+ ad7606_reset(st);
+
+ return 0;
+}
+
static int ad7606_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
@@ -201,15 +229,20 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
long mask)
{
struct ad7606_state *st = iio_priv(indio_dev);
- DECLARE_BITMAP(values, 3);
- int i;
+ int i, ret, ch = 0;
switch (mask) {
case IIO_CHAN_INFO_SCALE:
mutex_lock(&st->lock);
i = find_closest(val2, st->scale_avail, st->num_scales);
- gpiod_set_value(st->gpio_range, i);
- st->range = i;
+ if (st->sw_mode_en)
+ ch = chan->address;
+ ret = st->write_scale(indio_dev, ch, i);
+ if (ret < 0) {
+ mutex_unlock(&st->lock);
+ return ret;
+ }
+ st->range[ch] = i;
mutex_unlock(&st->lock);
return 0;
@@ -218,17 +251,12 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
return -EINVAL;
i = find_closest(val, st->oversampling_avail,
st->num_os_ratios);
-
- values[0] = i;
-
mutex_lock(&st->lock);
- gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
- st->gpio_os->info, values);
-
- /* AD7616 requires a reset to update value */
- if (st->chip_info->os_req_reset)
- ad7606_reset(st);
-
+ ret = st->write_os(indio_dev, i);
+ if (ret < 0) {
+ mutex_unlock(&st->lock);
+ return ret;
+ }
st->oversampling = st->oversampling_avail[i];
mutex_unlock(&st->lock);
@@ -536,7 +564,7 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
st->bops = bops;
st->base_address = base_address;
/* tied to logic low, analog input range is +/- 5V */
- st->range = 0;
+ st->range[0] = 0;
st->oversampling = 1;
st->scale_avail = ad7606_scale_avail;
st->num_scales = ARRAY_SIZE(ad7606_scale_avail);
@@ -589,6 +617,39 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
if (ret)
dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
+ st->write_scale = ad7606_write_scale_hw;
+ st->write_os = ad7606_write_os_hw;
+
+ if (st->chip_info->sw_mode_config)
+ st->sw_mode_en = device_property_present(st->dev,
+ "adi,sw-mode");
+
+ if (st->sw_mode_en) {
+ /* After reset, in software mode, ±10 V is set by default */
+ memset32(st->range, 2, ARRAY_SIZE(st->range));
+ indio_dev->info = &ad7606_info_os_and_range;
+
+ /*
+ * In software mode, the range gpio has no longer its function.
+ * Instead, the scale can be configured individually for each
+ * channel from the range registers.
+ */
+ if (st->chip_info->write_scale_sw)
+ st->write_scale = st->chip_info->write_scale_sw;
+
+ /*
+ * In software mode, the oversampling is no longer configured
+ * with GPIO pins. Instead, the oversampling can be configured
+ * in configuratiion register.
+ */
+ if (st->chip_info->write_os_sw)
+ st->write_os = st->chip_info->write_os_sw;
+
+ ret = st->chip_info->sw_mode_config(indio_dev);
+ if (ret < 0)
+ return ret;
+ }
+
st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
indio_dev->name, indio_dev->id);
if (!st->trig)
@@ -643,7 +704,7 @@ static int ad7606_resume(struct device *dev)
struct ad7606_state *st = iio_priv(indio_dev);
if (st->gpio_standby) {
- gpiod_set_value(st->gpio_range, st->range);
+ gpiod_set_value(st->gpio_range, st->range[0]);
gpiod_set_value(st->gpio_standby, 1);
ad7606_reset(st);
}
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index f9ef52131e74..d8a509c2c428 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -16,6 +16,12 @@
* oversampling ratios.
* @oversampling_num number of elements stored in oversampling_avail array
* @os_req_reset some devices require a reset to update oversampling
+ * @write_scale_sw pointer to the function which writes the scale via spi
+ in software mode
+ * @write_os_sw pointer to the function which writes the os via spi
+ in software mode
+ * @sw_mode_config: pointer to a function which configured the device
+ * for software mode
*/
struct ad7606_chip_info {
const struct iio_chan_spec *channels;
@@ -23,6 +29,9 @@ struct ad7606_chip_info {
const unsigned int *oversampling_avail;
unsigned int oversampling_num;
bool os_req_reset;
+ int (*write_scale_sw)(struct iio_dev *indio_dev, int ch, int val);
+ int (*write_os_sw)(struct iio_dev *indio_dev, int val);
+ int (*sw_mode_config)(struct iio_dev *indio_dev);
};
/**
@@ -34,11 +43,14 @@ struct ad7606_chip_info {
* @range voltage range selection, selects which scale to apply
* @oversampling oversampling selection
* @base_address address from where to read data in parallel operation
+ * @sw_mode_en software mode enabled
* @scale_avail pointer to the array which stores the available scales
* @num_scales number of elements stored in the scale_avail array
* @oversampling_avail pointer to the array which stores the available
* oversampling ratios.
* @num_os_ratios number of elements stored in oversampling_avail array
+ * @write_scale pointer to the function which writes the scale
+ * @write_os pointer to the function which writes the os
* @lock protect sensor state from concurrent accesses to GPIOs
* @gpio_convst GPIO descriptor for conversion start signal (CONVST)
* @gpio_reset GPIO descriptor for device hard-reset
@@ -57,13 +69,16 @@ struct ad7606_state {
const struct ad7606_chip_info *chip_info;
struct regulator *reg;
const struct ad7606_bus_ops *bops;
- unsigned int range;
+ unsigned int range[16];
unsigned int oversampling;
void __iomem *base_address;
+ bool sw_mode_en;
const unsigned int *scale_avail;
unsigned int num_scales;
const unsigned int *oversampling_avail;
unsigned int num_os_ratios;
+ int (*write_scale)(struct iio_dev *indio_dev, int ch, int val);
+ int (*write_os)(struct iio_dev *indio_dev, int val);
struct mutex lock; /* protect sensor state */
struct gpio_desc *gpio_convst;
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index 1423221c6e06..2640b75fb774 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -357,7 +357,7 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
ret = ad_sigma_delta_set_channel(sigma_delta,
indio_dev->channels[channel].address);
if (ret)
- goto err_predisable;
+ return ret;
spi_bus_lock(sigma_delta->spi->master);
sigma_delta->bus_locked = true;
@@ -374,7 +374,6 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
err_unlock:
spi_bus_unlock(sigma_delta->spi->master);
-err_predisable:
return ret;
}
diff --git a/drivers/iio/adc/imx7d_adc.c b/drivers/iio/adc/imx7d_adc.c
index 4fe97c2a0f43..26a7bbe4d534 100644
--- a/drivers/iio/adc/imx7d_adc.c
+++ b/drivers/iio/adc/imx7d_adc.c
@@ -78,6 +78,7 @@
#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT 0xf0000
#define IMX7D_ADC_TIMEOUT msecs_to_jiffies(100)
+#define IMX7D_ADC_INPUT_CLK 24000000
enum imx7d_adc_clk_pre_div {
IMX7D_ADC_ANALOG_CLK_PRE_DIV_4,
@@ -100,8 +101,6 @@ struct imx7d_adc_feature {
enum imx7d_adc_average_num avg_num;
u32 core_time_unit; /* impact the sample rate */
-
- bool average_en;
};
struct imx7d_adc {
@@ -179,7 +178,6 @@ static void imx7d_adc_feature_config(struct imx7d_adc *info)
info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4;
info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32;
info->adc_feature.core_time_unit = 1;
- info->adc_feature.average_en = true;
}
static void imx7d_adc_sample_rate_set(struct imx7d_adc *info)
@@ -240,9 +238,8 @@ static void imx7d_adc_channel_set(struct imx7d_adc *info)
/* the channel choose single conversion, and enable average mode */
cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN |
- IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE);
- if (info->adc_feature.average_en)
- cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN;
+ IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE |
+ IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN);
/*
* physical channel 0 chose logical channel A
@@ -272,13 +269,11 @@ static void imx7d_adc_channel_set(struct imx7d_adc *info)
static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info)
{
- /* input clock is always 24MHz */
- u32 input_clk = 24000000;
u32 analogue_core_clk;
u32 core_time_unit = info->adc_feature.core_time_unit;
u32 tmp;
- analogue_core_clk = input_clk / info->pre_div_num;
+ analogue_core_clk = IMX7D_ADC_INPUT_CLK / info->pre_div_num;
tmp = (core_time_unit + 1) * 6;
return analogue_core_clk / tmp;
@@ -493,11 +488,8 @@ static int imx7d_adc_probe(struct platform_device *pdev)
info->dev = dev;
info->regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(info->regs)) {
- ret = PTR_ERR(info->regs);
- dev_err(dev, "Failed to remap adc memory, err = %d\n", ret);
- return ret;
- }
+ if (IS_ERR(info->regs))
+ return PTR_ERR(info->regs);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -531,9 +523,7 @@ static int imx7d_adc_probe(struct platform_device *pdev)
indio_dev->channels = imx7d_adc_iio_channels;
indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels);
- ret = devm_request_irq(dev, irq,
- imx7d_adc_isr, 0,
- dev_name(dev), info);
+ ret = devm_request_irq(dev, irq, imx7d_adc_isr, 0, dev_name(dev), info);
if (ret < 0) {
dev_err(dev, "Failed requesting irq, irq = %d\n", irq);
return ret;
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 70bbcf253cb6..7b28d045d271 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-License-Identifier: GPL-2.0
/*
* Amlogic Meson Successive Approximation Register (SAR) A/D Converter
*
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 2327ec18b40c..1f7ce5186dfc 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -87,6 +87,7 @@ struct stm32_adc_priv_cfg {
* @domain: irq domain reference
* @aclk: clock reference for the analog circuitry
* @bclk: bus clock common for all ADCs, depends on part used
+ * @vdda: vdda analog supply reference
* @vref: regulator reference
* @cfg: compatible configuration data
* @common: common data for all ADC instances
@@ -97,6 +98,7 @@ struct stm32_adc_priv {
struct irq_domain *domain;
struct clk *aclk;
struct clk *bclk;
+ struct regulator *vdda;
struct regulator *vref;
const struct stm32_adc_priv_cfg *cfg;
struct stm32_adc_common common;
@@ -394,10 +396,16 @@ static int stm32_adc_core_hw_start(struct device *dev)
struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
int ret;
+ ret = regulator_enable(priv->vdda);
+ if (ret < 0) {
+ dev_err(dev, "vdda enable failed %d\n", ret);
+ return ret;
+ }
+
ret = regulator_enable(priv->vref);
if (ret < 0) {
dev_err(dev, "vref enable failed\n");
- return ret;
+ goto err_vdda_disable;
}
if (priv->bclk) {
@@ -425,6 +433,8 @@ err_bclk_disable:
clk_disable_unprepare(priv->bclk);
err_regulator_disable:
regulator_disable(priv->vref);
+err_vdda_disable:
+ regulator_disable(priv->vdda);
return ret;
}
@@ -441,6 +451,7 @@ static void stm32_adc_core_hw_stop(struct device *dev)
if (priv->bclk)
clk_disable_unprepare(priv->bclk);
regulator_disable(priv->vref);
+ regulator_disable(priv->vdda);
}
static int stm32_adc_probe(struct platform_device *pdev)
@@ -468,6 +479,14 @@ static int stm32_adc_probe(struct platform_device *pdev)
return PTR_ERR(priv->common.base);
priv->common.phys_base = res->start;
+ priv->vdda = devm_regulator_get(&pdev->dev, "vdda");
+ if (IS_ERR(priv->vdda)) {
+ ret = PTR_ERR(priv->vdda);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "vdda get failed, %d\n", ret);
+ return ret;
+ }
+
priv->vref = devm_regulator_get(&pdev->dev, "vref");
if (IS_ERR(priv->vref)) {
ret = PTR_ERR(priv->vref);
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 588907cc3b6b..ee1e0569d0e1 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -39,9 +39,16 @@
#define DFSDM_MAX_INT_OVERSAMPLING 256
#define DFSDM_MAX_FL_OVERSAMPLING 1024
-/* Max sample resolutions */
-#define DFSDM_MAX_RES BIT(31)
-#define DFSDM_DATA_RES BIT(23)
+/* Limit filter output resolution to 31 bits. (i.e. sample range is +/-2^30) */
+#define DFSDM_DATA_MAX BIT(30)
+/*
+ * Data are output as two's complement data in a 24 bit field.
+ * Data from filters are in the range +/-2^(n-1)
+ * 2^(n-1) maximum positive value cannot be coded in 2's complement n bits
+ * An extra bit is required to avoid wrap-around of the binary code for 2^(n-1)
+ * So, the resolution of samples from filter is actually limited to 23 bits
+ */
+#define DFSDM_DATA_RES 24
/* Filter configuration */
#define DFSDM_CR1_CFG_MASK (DFSDM_CR1_RCH_MASK | DFSDM_CR1_RCONT_MASK | \
@@ -181,14 +188,15 @@ static int stm32_dfsdm_get_jextsel(struct iio_dev *indio_dev,
return -EINVAL;
}
-static int stm32_dfsdm_set_osrs(struct stm32_dfsdm_filter *fl,
- unsigned int fast, unsigned int oversamp)
+static int stm32_dfsdm_compute_osrs(struct stm32_dfsdm_filter *fl,
+ unsigned int fast, unsigned int oversamp)
{
unsigned int i, d, fosr, iosr;
- u64 res;
- s64 delta;
+ u64 res, max;
+ int bits, shift;
unsigned int m = 1; /* multiplication factor */
unsigned int p = fl->ford; /* filter order (ford) */
+ struct stm32_dfsdm_filter_osr *flo = &fl->flo[fast];
pr_debug("%s: Requested oversampling: %d\n", __func__, oversamp);
/*
@@ -207,11 +215,8 @@ static int stm32_dfsdm_set_osrs(struct stm32_dfsdm_filter *fl,
/*
* Look for filter and integrator oversampling ratios which allows
- * to reach 24 bits data output resolution.
- * Leave as soon as if exact resolution if reached.
- * Otherwise the higher resolution below 32 bits is kept.
+ * to maximize data output resolution.
*/
- fl->res = 0;
for (fosr = 1; fosr <= DFSDM_MAX_FL_OVERSAMPLING; fosr++) {
for (iosr = 1; iosr <= DFSDM_MAX_INT_OVERSAMPLING; iosr++) {
if (fast)
@@ -236,33 +241,91 @@ static int stm32_dfsdm_set_osrs(struct stm32_dfsdm_filter *fl,
res = fosr;
for (i = p - 1; i > 0; i--) {
res = res * (u64)fosr;
- if (res > DFSDM_MAX_RES)
+ if (res > DFSDM_DATA_MAX)
break;
}
- if (res > DFSDM_MAX_RES)
+ if (res > DFSDM_DATA_MAX)
continue;
+
res = res * (u64)m * (u64)iosr;
- if (res > DFSDM_MAX_RES)
+ if (res > DFSDM_DATA_MAX)
continue;
- delta = res - DFSDM_DATA_RES;
-
- if (res >= fl->res) {
- fl->res = res;
- fl->fosr = fosr;
- fl->iosr = iosr;
- fl->fast = fast;
- pr_debug("%s: fosr = %d, iosr = %d\n",
- __func__, fl->fosr, fl->iosr);
+ if (res >= flo->res) {
+ flo->res = res;
+ flo->fosr = fosr;
+ flo->iosr = iosr;
+
+ bits = fls(flo->res);
+ /* 8 LBSs in data register contain chan info */
+ max = flo->res << 8;
+
+ /* if resolution is not a power of two */
+ if (flo->res > BIT(bits - 1))
+ bits++;
+ else
+ max--;
+
+ shift = DFSDM_DATA_RES - bits;
+ /*
+ * Compute right/left shift
+ * Right shift is performed by hardware
+ * when transferring samples to data register.
+ * Left shift is done by software on buffer
+ */
+ if (shift > 0) {
+ /* Resolution is lower than 24 bits */
+ flo->rshift = 0;
+ flo->lshift = shift;
+ } else {
+ /*
+ * If resolution is 24 bits or more,
+ * max positive value may be ambiguous
+ * (equal to max negative value as sign
+ * bit is dropped).
+ * Reduce resolution to 23 bits (rshift)
+ * to keep the sign on bit 23 and treat
+ * saturation before rescaling on 24
+ * bits (lshift).
+ */
+ flo->rshift = 1 - shift;
+ flo->lshift = 1;
+ max >>= flo->rshift;
+ }
+ flo->max = (s32)max;
+
+ pr_debug("%s: fast %d, fosr %d, iosr %d, res 0x%llx/%d bits, rshift %d, lshift %d\n",
+ __func__, fast, flo->fosr, flo->iosr,
+ flo->res, bits, flo->rshift,
+ flo->lshift);
}
-
- if (!delta)
- return 0;
}
}
- if (!fl->res)
+ if (!flo->res)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int stm32_dfsdm_compute_all_osrs(struct iio_dev *indio_dev,
+ unsigned int oversamp)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
+ int ret0, ret1;
+
+ memset(&fl->flo[0], 0, sizeof(fl->flo[0]));
+ memset(&fl->flo[1], 0, sizeof(fl->flo[1]));
+
+ ret0 = stm32_dfsdm_compute_osrs(fl, 0, oversamp);
+ ret1 = stm32_dfsdm_compute_osrs(fl, 1, oversamp);
+ if (ret0 < 0 && ret1 < 0) {
+ dev_err(&indio_dev->dev,
+ "Filter parameters not found: errors %d/%d\n",
+ ret0, ret1);
return -EINVAL;
+ }
return 0;
}
@@ -384,6 +447,50 @@ static int stm32_dfsdm_filter_set_trig(struct stm32_dfsdm_adc *adc,
return 0;
}
+static int stm32_dfsdm_channels_configure(struct stm32_dfsdm_adc *adc,
+ unsigned int fl_id,
+ struct iio_trigger *trig)
+{
+ struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+ struct regmap *regmap = adc->dfsdm->regmap;
+ struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[fl_id];
+ struct stm32_dfsdm_filter_osr *flo = &fl->flo[0];
+ const struct iio_chan_spec *chan;
+ unsigned int bit;
+ int ret;
+
+ fl->fast = 0;
+
+ /*
+ * In continuous mode, use fast mode configuration,
+ * if it provides a better resolution.
+ */
+ if (adc->nconv == 1 && !trig &&
+ (indio_dev->currentmode & INDIO_BUFFER_SOFTWARE)) {
+ if (fl->flo[1].res >= fl->flo[0].res) {
+ fl->fast = 1;
+ flo = &fl->flo[1];
+ }
+ }
+
+ if (!flo->res)
+ return -EINVAL;
+
+ for_each_set_bit(bit, &adc->smask,
+ sizeof(adc->smask) * BITS_PER_BYTE) {
+ chan = indio_dev->channels + bit;
+
+ ret = regmap_update_bits(regmap,
+ DFSDM_CHCFGR2(chan->channel),
+ DFSDM_CHCFGR2_DTRBS_MASK,
+ DFSDM_CHCFGR2_DTRBS(flo->rshift));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static int stm32_dfsdm_filter_configure(struct stm32_dfsdm_adc *adc,
unsigned int fl_id,
struct iio_trigger *trig)
@@ -391,6 +498,7 @@ static int stm32_dfsdm_filter_configure(struct stm32_dfsdm_adc *adc,
struct iio_dev *indio_dev = iio_priv_to_dev(adc);
struct regmap *regmap = adc->dfsdm->regmap;
struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[fl_id];
+ struct stm32_dfsdm_filter_osr *flo = &fl->flo[fl->fast];
u32 cr1;
const struct iio_chan_spec *chan;
unsigned int bit, jchg = 0;
@@ -398,13 +506,13 @@ static int stm32_dfsdm_filter_configure(struct stm32_dfsdm_adc *adc,
/* Average integrator oversampling */
ret = regmap_update_bits(regmap, DFSDM_FCR(fl_id), DFSDM_FCR_IOSR_MASK,
- DFSDM_FCR_IOSR(fl->iosr - 1));
+ DFSDM_FCR_IOSR(flo->iosr - 1));
if (ret)
return ret;
/* Filter order and Oversampling */
ret = regmap_update_bits(regmap, DFSDM_FCR(fl_id), DFSDM_FCR_FOSR_MASK,
- DFSDM_FCR_FOSR(fl->fosr - 1));
+ DFSDM_FCR_FOSR(flo->fosr - 1));
if (ret)
return ret;
@@ -417,6 +525,12 @@ static int stm32_dfsdm_filter_configure(struct stm32_dfsdm_adc *adc,
if (ret)
return ret;
+ ret = regmap_update_bits(regmap, DFSDM_CR1(fl_id),
+ DFSDM_CR1_FAST_MASK,
+ DFSDM_CR1_FAST(fl->fast));
+ if (ret)
+ return ret;
+
/*
* DFSDM modes configuration W.R.T audio/iio type modes
* ----------------------------------------------------------------
@@ -563,7 +677,6 @@ static int dfsdm_adc_set_samp_freq(struct iio_dev *indio_dev,
unsigned int spi_freq)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
- struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
unsigned int oversamp;
int ret;
@@ -573,11 +686,10 @@ static int dfsdm_adc_set_samp_freq(struct iio_dev *indio_dev,
"Rate not accurate. requested (%u), actual (%u)\n",
sample_freq, spi_freq / oversamp);
- ret = stm32_dfsdm_set_osrs(fl, 0, oversamp);
- if (ret < 0) {
- dev_err(&indio_dev->dev, "No filter parameters that match!\n");
+ ret = stm32_dfsdm_compute_all_osrs(indio_dev, oversamp);
+ if (ret < 0)
return ret;
- }
+
adc->sample_freq = spi_freq / oversamp;
adc->oversamp = oversamp;
@@ -623,6 +735,10 @@ static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc,
struct regmap *regmap = adc->dfsdm->regmap;
int ret;
+ ret = stm32_dfsdm_channels_configure(adc, adc->fl_id, trig);
+ if (ret < 0)
+ return ret;
+
ret = stm32_dfsdm_start_channel(adc);
if (ret < 0)
return ret;
@@ -702,6 +818,30 @@ static unsigned int stm32_dfsdm_adc_dma_residue(struct stm32_dfsdm_adc *adc)
return 0;
}
+static inline void stm32_dfsdm_process_data(struct stm32_dfsdm_adc *adc,
+ s32 *buffer)
+{
+ struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
+ struct stm32_dfsdm_filter_osr *flo = &fl->flo[fl->fast];
+ unsigned int i = adc->nconv;
+ s32 *ptr = buffer;
+
+ while (i--) {
+ /* Mask 8 LSB that contains the channel ID */
+ *ptr &= 0xFFFFFF00;
+ /* Convert 2^(n-1) sample to 2^(n-1)-1 to avoid wrap-around */
+ if (*ptr > flo->max)
+ *ptr -= 1;
+ /*
+ * Samples from filter are retrieved with 23 bits resolution
+ * or less. Shift left to align MSB on 24 bits.
+ */
+ *ptr <<= flo->lshift;
+
+ ptr++;
+ }
+}
+
static irqreturn_t stm32_dfsdm_adc_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
@@ -710,7 +850,9 @@ static irqreturn_t stm32_dfsdm_adc_trigger_handler(int irq, void *p)
int available = stm32_dfsdm_adc_dma_residue(adc);
while (available >= indio_dev->scan_bytes) {
- u32 *buffer = (u32 *)&adc->rx_buf[adc->bufi];
+ s32 *buffer = (s32 *)&adc->rx_buf[adc->bufi];
+
+ stm32_dfsdm_process_data(adc, buffer);
iio_push_to_buffers_with_timestamp(indio_dev, buffer,
pf->timestamp);
@@ -751,10 +893,10 @@ static void stm32_dfsdm_dma_buffer_done(void *data)
old_pos = adc->bufi;
while (available >= indio_dev->scan_bytes) {
- u32 *buffer = (u32 *)&adc->rx_buf[adc->bufi];
+ s32 *buffer = (s32 *)&adc->rx_buf[adc->bufi];
+
+ stm32_dfsdm_process_data(adc, buffer);
- /* Mask 8 LSB that contains the channel ID */
- *buffer = (*buffer & 0xFFFFFF00) << 8;
available -= indio_dev->scan_bytes;
adc->bufi += indio_dev->scan_bytes;
if (adc->bufi >= adc->buf_sz) {
@@ -776,6 +918,11 @@ static void stm32_dfsdm_dma_buffer_done(void *data)
static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ /*
+ * The DFSDM supports half-word transfers. However, for 16 bits record,
+ * 4 bytes buswidth is kept, to avoid losing samples LSBs when left
+ * shift is required.
+ */
struct dma_slave_config config = {
.src_addr = (dma_addr_t)adc->dfsdm->phys_base,
.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
@@ -1068,7 +1215,6 @@ static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev,
int val, int val2, long mask)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
- struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[chan->channel];
unsigned int spi_freq;
int ret = -EINVAL;
@@ -1078,7 +1224,7 @@ static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev,
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
- ret = stm32_dfsdm_set_osrs(fl, 0, val);
+ ret = stm32_dfsdm_compute_all_osrs(indio_dev, val);
if (!ret)
adc->oversamp = val;
iio_device_release_direct_mode(indio_dev);
@@ -1277,11 +1423,11 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
BIT(IIO_CHAN_INFO_SAMP_FREQ);
if (adc->dev_data->type == DFSDM_AUDIO) {
- ch->scan_type.sign = 's';
ch->ext_info = dfsdm_adc_audio_ext_info;
} else {
- ch->scan_type.sign = 'u';
+ ch->scan_type.shift = 8;
}
+ ch->scan_type.sign = 's';
ch->scan_type.realbits = 24;
ch->scan_type.storagebits = 32;
@@ -1327,8 +1473,7 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
int ret, chan_idx;
adc->oversamp = DFSDM_DEFAULT_OVERSAMPLING;
- ret = stm32_dfsdm_set_osrs(&adc->dfsdm->fl_list[adc->fl_id], 0,
- adc->oversamp);
+ ret = stm32_dfsdm_compute_all_osrs(indio_dev, adc->oversamp);
if (ret < 0)
return ret;
diff --git a/drivers/iio/adc/stm32-dfsdm.h b/drivers/iio/adc/stm32-dfsdm.h
index 8708394b0725..5dbdae4ed881 100644
--- a/drivers/iio/adc/stm32-dfsdm.h
+++ b/drivers/iio/adc/stm32-dfsdm.h
@@ -243,19 +243,33 @@ enum stm32_dfsdm_sinc_order {
};
/**
- * struct stm32_dfsdm_filter - structure relative to stm32 FDSDM filter
+ * struct stm32_dfsdm_filter_osr - DFSDM filter settings linked to oversampling
* @iosr: integrator oversampling
* @fosr: filter oversampling
- * @ford: filter order
+ * @rshift: output sample right shift (hardware shift)
+ * @lshift: output sample left shift (software shift)
* @res: output sample resolution
+ * @max: output sample maximum positive value
+ */
+struct stm32_dfsdm_filter_osr {
+ unsigned int iosr;
+ unsigned int fosr;
+ unsigned int rshift;
+ unsigned int lshift;
+ u64 res;
+ s32 max;
+};
+
+/**
+ * struct stm32_dfsdm_filter - structure relative to stm32 FDSDM filter
+ * @ford: filter order
+ * @flo: filter oversampling data table indexed by fast mode flag
* @sync_mode: filter synchronized with filter 0
* @fast: filter fast mode
*/
struct stm32_dfsdm_filter {
- unsigned int iosr;
- unsigned int fosr;
enum stm32_dfsdm_sinc_order ford;
- u64 res;
+ struct stm32_dfsdm_filter_osr flo[2];
unsigned int sync_mode;
unsigned int fast;
};
diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig
index 863d73519c0d..da7f126d197b 100644
--- a/drivers/iio/amplifiers/Kconfig
+++ b/drivers/iio/amplifiers/Kconfig
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only
+# SPDX-License-Identifier: GPL-2.0
#
# Gain Amplifiers, etc.
#
@@ -7,12 +7,17 @@
menu "Amplifiers"
config AD8366
- tristate "Analog Devices AD8366 VGA"
+ tristate "Analog Devices AD8366 and similar Gain Amplifiers"
depends on SPI
+ depends on GPIOLIB
select BITREVERSE
help
- Say yes here to build support for Analog Devices AD8366
- SPI Dual-Digital Variable Gain Amplifier (VGA).
+ Say yes here to build support for Analog Devices AD8366 and similar
+ gain amplifiers. This driver supports the following gain amplifiers
+ from Analog Devices:
+ AD8366 Dual-Digital Variable Gain Amplifier (VGA)
+ ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
+ ADL5240 Digitally controlled variable gain amplifier (VGA)
To compile this driver as a module, choose M here: the
module will be called ad8366.
diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c
index 3d6246f86429..0176d3d8cc9c 100644
--- a/drivers/iio/amplifiers/ad8366.c
+++ b/drivers/iio/amplifiers/ad8366.c
@@ -1,8 +1,12 @@
-// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-License-Identifier: GPL-2.0
/*
- * AD8366 SPI Dual-Digital Variable Gain Amplifier (VGA)
+ * AD8366 and similar Gain Amplifiers
+ * This driver supports the following gain amplifiers:
+ * AD8366 Dual-Digital Variable Gain Amplifier (VGA)
+ * ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
+ * ADL5240 Digitally controlled variable gain amplifier (VGA)
*
- * Copyright 2012 Analog Devices Inc.
+ * Copyright 2012-2019 Analog Devices Inc.
*/
#include <linux/device.h>
@@ -11,6 +15,7 @@
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/bitrev.h>
@@ -18,10 +23,25 @@
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
+enum ad8366_type {
+ ID_AD8366,
+ ID_ADA4961,
+ ID_ADL5240,
+};
+
+struct ad8366_info {
+ int gain_min;
+ int gain_max;
+};
+
struct ad8366_state {
struct spi_device *spi;
struct regulator *reg;
+ struct mutex lock; /* protect sensor state */
+ struct gpio_desc *reset_gpio;
unsigned char ch[2];
+ enum ad8366_type type;
+ struct ad8366_info *info;
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
@@ -29,19 +49,44 @@ struct ad8366_state {
unsigned char data[2] ____cacheline_aligned;
};
+static struct ad8366_info ad8366_infos[] = {
+ [ID_AD8366] = {
+ .gain_min = 4500,
+ .gain_max = 20500,
+ },
+ [ID_ADA4961] = {
+ .gain_min = -6000,
+ .gain_max = 15000,
+ },
+ [ID_ADL5240] = {
+ .gain_min = -11500,
+ .gain_max = 20000,
+ },
+};
+
static int ad8366_write(struct iio_dev *indio_dev,
unsigned char ch_a, unsigned char ch_b)
{
struct ad8366_state *st = iio_priv(indio_dev);
int ret;
- ch_a = bitrev8(ch_a & 0x3F);
- ch_b = bitrev8(ch_b & 0x3F);
+ switch (st->type) {
+ case ID_AD8366:
+ ch_a = bitrev8(ch_a & 0x3F);
+ ch_b = bitrev8(ch_b & 0x3F);
- st->data[0] = ch_b >> 4;
- st->data[1] = (ch_b << 4) | (ch_a >> 2);
+ st->data[0] = ch_b >> 4;
+ st->data[1] = (ch_b << 4) | (ch_a >> 2);
+ break;
+ case ID_ADA4961:
+ st->data[0] = ch_a & 0x1F;
+ break;
+ case ID_ADL5240:
+ st->data[0] = (ch_a & 0x3F);
+ break;
+ }
- ret = spi_write(st->spi, st->data, ARRAY_SIZE(st->data));
+ ret = spi_write(st->spi, st->data, indio_dev->num_channels);
if (ret < 0)
dev_err(&indio_dev->dev, "write failed (%d)", ret);
@@ -56,24 +101,35 @@ static int ad8366_read_raw(struct iio_dev *indio_dev,
{
struct ad8366_state *st = iio_priv(indio_dev);
int ret;
- unsigned code;
+ int code, gain = 0;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
switch (m) {
case IIO_CHAN_INFO_HARDWAREGAIN:
code = st->ch[chan->channel];
+ switch (st->type) {
+ case ID_AD8366:
+ gain = code * 253 + 4500;
+ break;
+ case ID_ADA4961:
+ gain = 15000 - code * 1000;
+ break;
+ case ID_ADL5240:
+ gain = 20000 - 31500 + code * 500;
+ break;
+ }
+
/* Values in dB */
- code = code * 253 + 4500;
- *val = code / 1000;
- *val2 = (code % 1000) * 1000;
+ *val = gain / 1000;
+ *val2 = (gain % 1000) * 1000;
ret = IIO_VAL_INT_PLUS_MICRO_DB;
break;
default:
ret = -EINVAL;
}
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return ret;
};
@@ -85,21 +141,32 @@ static int ad8366_write_raw(struct iio_dev *indio_dev,
long mask)
{
struct ad8366_state *st = iio_priv(indio_dev);
- unsigned code;
+ struct ad8366_info *inf = st->info;
+ int code = 0, gain;
int ret;
- if (val < 0 || val2 < 0)
- return -EINVAL;
-
/* Values in dB */
- code = (((u8)val * 1000) + ((u32)val2 / 1000));
+ if (val < 0)
+ gain = (val * 1000) - (val2 / 1000);
+ else
+ gain = (val * 1000) + (val2 / 1000);
- if (code > 20500 || code < 4500)
+ if (gain > inf->gain_max || gain < inf->gain_min)
return -EINVAL;
- code = (code - 4500) / 253;
+ switch (st->type) {
+ case ID_AD8366:
+ code = (gain - 4500) / 253;
+ break;
+ case ID_ADA4961:
+ code = (15000 - gain) / 1000;
+ break;
+ case ID_ADL5240:
+ code = ((gain - 500 - 20000) / 500) & 0x3F;
+ break;
+ }
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
st->ch[chan->channel] = code;
@@ -108,7 +175,7 @@ static int ad8366_write_raw(struct iio_dev *indio_dev,
default:
ret = -EINVAL;
}
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return ret;
}
@@ -131,6 +198,10 @@ static const struct iio_chan_spec ad8366_channels[] = {
AD8366_CHAN(1),
};
+static const struct iio_chan_spec ada4961_channels[] = {
+ AD8366_CHAN(0),
+};
+
static int ad8366_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
@@ -151,14 +222,33 @@ static int ad8366_probe(struct spi_device *spi)
}
spi_set_drvdata(spi, indio_dev);
+ mutex_init(&st->lock);
st->spi = spi;
+ st->type = spi_get_device_id(spi)->driver_data;
+
+ switch (st->type) {
+ case ID_AD8366:
+ indio_dev->channels = ad8366_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
+ break;
+ case ID_ADA4961:
+ case ID_ADL5240:
+ st->reset_gpio = devm_gpiod_get(&spi->dev, "reset",
+ GPIOD_OUT_HIGH);
+ indio_dev->channels = ada4961_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ada4961_channels);
+ break;
+ default:
+ dev_err(&spi->dev, "Invalid device ID\n");
+ ret = -EINVAL;
+ goto error_disable_reg;
+ }
+ st->info = &ad8366_infos[st->type];
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->info = &ad8366_info;
indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = ad8366_channels;
- indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
ret = ad8366_write(indio_dev, 0 , 0);
if (ret < 0)
@@ -192,7 +282,9 @@ static int ad8366_remove(struct spi_device *spi)
}
static const struct spi_device_id ad8366_id[] = {
- {"ad8366", 0},
+ {"ad8366", ID_AD8366},
+ {"ada4961", ID_ADA4961},
+ {"adl5240", ID_ADL5240},
{}
};
MODULE_DEVICE_TABLE(spi, ad8366_id);
@@ -209,5 +301,5 @@ static struct spi_driver ad8366_driver = {
module_spi_driver(ad8366_driver);
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
-MODULE_DESCRIPTION("Analog Devices AD8366 VGA");
+MODULE_DESCRIPTION("Analog Devices AD8366 and similar Gain Amplifiers");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig
index c86db8b42380..240b81502512 100644
--- a/drivers/iio/frequency/Kconfig
+++ b/drivers/iio/frequency/Kconfig
@@ -39,5 +39,15 @@ config ADF4350
To compile this driver as a module, choose M here: the
module will be called adf4350.
+config ADF4371
+ tristate "Analog Devices ADF4371/ADF4372 Wideband Synthesizers"
+ depends on SPI
+ select REGMAP_SPI
+ help
+ Say yes here to build support for Analog Devices ADF4371 and ADF4372
+ Wideband Synthesizers. The driver provides direct access via sysfs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adf4371.
endmenu
endmenu
diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile
index f2e396d40ddd..518b1e50caef 100644
--- a/drivers/iio/frequency/Makefile
+++ b/drivers/iio/frequency/Makefile
@@ -6,3 +6,4 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AD9523) += ad9523.o
obj-$(CONFIG_ADF4350) += adf4350.o
+obj-$(CONFIG_ADF4371) += adf4371.o
diff --git a/drivers/iio/frequency/adf4371.c b/drivers/iio/frequency/adf4371.c
new file mode 100644
index 000000000000..e48f15cc9ab5
--- /dev/null
+++ b/drivers/iio/frequency/adf4371.c
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices ADF4371 SPI Wideband Synthesizer driver
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gcd.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+
+/* Registers address macro */
+#define ADF4371_REG(x) (x)
+
+/* ADF4371_REG0 */
+#define ADF4371_ADDR_ASC_MSK BIT(2)
+#define ADF4371_ADDR_ASC(x) FIELD_PREP(ADF4371_ADDR_ASC_MSK, x)
+#define ADF4371_ADDR_ASC_R_MSK BIT(5)
+#define ADF4371_ADDR_ASC_R(x) FIELD_PREP(ADF4371_ADDR_ASC_R_MSK, x)
+#define ADF4371_RESET_CMD 0x81
+
+/* ADF4371_REG17 */
+#define ADF4371_FRAC2WORD_L_MSK GENMASK(7, 1)
+#define ADF4371_FRAC2WORD_L(x) FIELD_PREP(ADF4371_FRAC2WORD_L_MSK, x)
+#define ADF4371_FRAC1WORD_MSK BIT(0)
+#define ADF4371_FRAC1WORD(x) FIELD_PREP(ADF4371_FRAC1WORD_MSK, x)
+
+/* ADF4371_REG18 */
+#define ADF4371_FRAC2WORD_H_MSK GENMASK(6, 0)
+#define ADF4371_FRAC2WORD_H(x) FIELD_PREP(ADF4371_FRAC2WORD_H_MSK, x)
+
+/* ADF4371_REG1A */
+#define ADF4371_MOD2WORD_MSK GENMASK(5, 0)
+#define ADF4371_MOD2WORD(x) FIELD_PREP(ADF4371_MOD2WORD_MSK, x)
+
+/* ADF4371_REG24 */
+#define ADF4371_RF_DIV_SEL_MSK GENMASK(6, 4)
+#define ADF4371_RF_DIV_SEL(x) FIELD_PREP(ADF4371_RF_DIV_SEL_MSK, x)
+
+/* ADF4371_REG25 */
+#define ADF4371_MUTE_LD_MSK BIT(7)
+#define ADF4371_MUTE_LD(x) FIELD_PREP(ADF4371_MUTE_LD_MSK, x)
+
+/* ADF4371_REG32 */
+#define ADF4371_TIMEOUT_MSK GENMASK(1, 0)
+#define ADF4371_TIMEOUT(x) FIELD_PREP(ADF4371_TIMEOUT_MSK, x)
+
+/* ADF4371_REG34 */
+#define ADF4371_VCO_ALC_TOUT_MSK GENMASK(4, 0)
+#define ADF4371_VCO_ALC_TOUT(x) FIELD_PREP(ADF4371_VCO_ALC_TOUT_MSK, x)
+
+/* Specifications */
+#define ADF4371_MIN_VCO_FREQ 4000000000ULL /* 4000 MHz */
+#define ADF4371_MAX_VCO_FREQ 8000000000ULL /* 8000 MHz */
+#define ADF4371_MAX_OUT_RF8_FREQ ADF4371_MAX_VCO_FREQ /* Hz */
+#define ADF4371_MIN_OUT_RF8_FREQ (ADF4371_MIN_VCO_FREQ / 64) /* Hz */
+#define ADF4371_MAX_OUT_RF16_FREQ (ADF4371_MAX_VCO_FREQ * 2) /* Hz */
+#define ADF4371_MIN_OUT_RF16_FREQ (ADF4371_MIN_VCO_FREQ * 2) /* Hz */
+#define ADF4371_MAX_OUT_RF32_FREQ (ADF4371_MAX_VCO_FREQ * 4) /* Hz */
+#define ADF4371_MIN_OUT_RF32_FREQ (ADF4371_MIN_VCO_FREQ * 4) /* Hz */
+
+#define ADF4371_MAX_FREQ_PFD 250000000UL /* Hz */
+#define ADF4371_MAX_FREQ_REFIN 600000000UL /* Hz */
+
+/* MOD1 is a 24-bit primary modulus with fixed value of 2^25 */
+#define ADF4371_MODULUS1 33554432ULL
+/* MOD2 is the programmable, 14-bit auxiliary fractional modulus */
+#define ADF4371_MAX_MODULUS2 BIT(14)
+
+#define ADF4371_CHECK_RANGE(freq, range) \
+ ((freq > ADF4371_MAX_ ## range) || (freq < ADF4371_MIN_ ## range))
+
+enum {
+ ADF4371_FREQ,
+ ADF4371_POWER_DOWN,
+ ADF4371_CHANNEL_NAME
+};
+
+enum {
+ ADF4371_CH_RF8,
+ ADF4371_CH_RFAUX8,
+ ADF4371_CH_RF16,
+ ADF4371_CH_RF32
+};
+
+enum adf4371_variant {
+ ADF4371,
+ ADF4372
+};
+
+struct adf4371_pwrdown {
+ unsigned int reg;
+ unsigned int bit;
+};
+
+static const char * const adf4371_ch_names[] = {
+ "RF8x", "RFAUX8x", "RF16x", "RF32x"
+};
+
+static const struct adf4371_pwrdown adf4371_pwrdown_ch[4] = {
+ [ADF4371_CH_RF8] = { ADF4371_REG(0x25), 2 },
+ [ADF4371_CH_RFAUX8] = { ADF4371_REG(0x72), 3 },
+ [ADF4371_CH_RF16] = { ADF4371_REG(0x25), 3 },
+ [ADF4371_CH_RF32] = { ADF4371_REG(0x25), 4 },
+};
+
+static const struct reg_sequence adf4371_reg_defaults[] = {
+ { ADF4371_REG(0x0), 0x18 },
+ { ADF4371_REG(0x12), 0x40 },
+ { ADF4371_REG(0x1E), 0x48 },
+ { ADF4371_REG(0x20), 0x14 },
+ { ADF4371_REG(0x22), 0x00 },
+ { ADF4371_REG(0x23), 0x00 },
+ { ADF4371_REG(0x24), 0x80 },
+ { ADF4371_REG(0x25), 0x07 },
+ { ADF4371_REG(0x27), 0xC5 },
+ { ADF4371_REG(0x28), 0x83 },
+ { ADF4371_REG(0x2C), 0x44 },
+ { ADF4371_REG(0x2D), 0x11 },
+ { ADF4371_REG(0x2E), 0x12 },
+ { ADF4371_REG(0x2F), 0x94 },
+ { ADF4371_REG(0x32), 0x04 },
+ { ADF4371_REG(0x35), 0xFA },
+ { ADF4371_REG(0x36), 0x30 },
+ { ADF4371_REG(0x39), 0x07 },
+ { ADF4371_REG(0x3A), 0x55 },
+ { ADF4371_REG(0x3E), 0x0C },
+ { ADF4371_REG(0x3F), 0x80 },
+ { ADF4371_REG(0x40), 0x50 },
+ { ADF4371_REG(0x41), 0x28 },
+ { ADF4371_REG(0x47), 0xC0 },
+ { ADF4371_REG(0x52), 0xF4 },
+ { ADF4371_REG(0x70), 0x03 },
+ { ADF4371_REG(0x71), 0x60 },
+ { ADF4371_REG(0x72), 0x32 },
+};
+
+static const struct regmap_config adf4371_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .read_flag_mask = BIT(7),
+};
+
+struct adf4371_chip_info {
+ unsigned int num_channels;
+ const struct iio_chan_spec *channels;
+};
+
+struct adf4371_state {
+ struct spi_device *spi;
+ struct regmap *regmap;
+ struct clk *clkin;
+ /*
+ * Lock for accessing device registers. Some operations require
+ * multiple consecutive R/W operations, during which the device
+ * shouldn't be interrupted. The buffers are also shared across
+ * all operations so need to be protected on stand alone reads and
+ * writes.
+ */
+ struct mutex lock;
+ const struct adf4371_chip_info *chip_info;
+ unsigned long clkin_freq;
+ unsigned long fpfd;
+ unsigned int integer;
+ unsigned int fract1;
+ unsigned int fract2;
+ unsigned int mod2;
+ unsigned int rf_div_sel;
+ unsigned int ref_div_factor;
+ u8 buf[10] ____cacheline_aligned;
+};
+
+static unsigned long long adf4371_pll_fract_n_get_rate(struct adf4371_state *st,
+ u32 channel)
+{
+ unsigned long long val, tmp;
+ unsigned int ref_div_sel;
+
+ val = (((u64)st->integer * ADF4371_MODULUS1) + st->fract1) * st->fpfd;
+ tmp = (u64)st->fract2 * st->fpfd;
+ do_div(tmp, st->mod2);
+ val += tmp + ADF4371_MODULUS1 / 2;
+
+ if (channel == ADF4371_CH_RF8 || channel == ADF4371_CH_RFAUX8)
+ ref_div_sel = st->rf_div_sel;
+ else
+ ref_div_sel = 0;
+
+ do_div(val, ADF4371_MODULUS1 * (1 << ref_div_sel));
+
+ if (channel == ADF4371_CH_RF16)
+ val <<= 1;
+ else if (channel == ADF4371_CH_RF32)
+ val <<= 2;
+
+ return val;
+}
+
+static void adf4371_pll_fract_n_compute(unsigned long long vco,
+ unsigned long long pfd,
+ unsigned int *integer,
+ unsigned int *fract1,
+ unsigned int *fract2,
+ unsigned int *mod2)
+{
+ unsigned long long tmp;
+ u32 gcd_div;
+
+ tmp = do_div(vco, pfd);
+ tmp = tmp * ADF4371_MODULUS1;
+ *fract2 = do_div(tmp, pfd);
+
+ *integer = vco;
+ *fract1 = tmp;
+
+ *mod2 = pfd;
+
+ while (*mod2 > ADF4371_MAX_MODULUS2) {
+ *mod2 >>= 1;
+ *fract2 >>= 1;
+ }
+
+ gcd_div = gcd(*fract2, *mod2);
+ *mod2 /= gcd_div;
+ *fract2 /= gcd_div;
+}
+
+static int adf4371_set_freq(struct adf4371_state *st, unsigned long long freq,
+ unsigned int channel)
+{
+ u32 cp_bleed;
+ u8 int_mode = 0;
+ int ret;
+
+ switch (channel) {
+ case ADF4371_CH_RF8:
+ case ADF4371_CH_RFAUX8:
+ if (ADF4371_CHECK_RANGE(freq, OUT_RF8_FREQ))
+ return -EINVAL;
+
+ st->rf_div_sel = 0;
+
+ while (freq < ADF4371_MIN_VCO_FREQ) {
+ freq <<= 1;
+ st->rf_div_sel++;
+ }
+ break;
+ case ADF4371_CH_RF16:
+ /* ADF4371 RF16 8000...16000 MHz */
+ if (ADF4371_CHECK_RANGE(freq, OUT_RF16_FREQ))
+ return -EINVAL;
+
+ freq >>= 1;
+ break;
+ case ADF4371_CH_RF32:
+ /* ADF4371 RF32 16000...32000 MHz */
+ if (ADF4371_CHECK_RANGE(freq, OUT_RF32_FREQ))
+ return -EINVAL;
+
+ freq >>= 2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ adf4371_pll_fract_n_compute(freq, st->fpfd, &st->integer, &st->fract1,
+ &st->fract2, &st->mod2);
+ st->buf[0] = st->integer >> 8;
+ st->buf[1] = 0x40; /* REG12 default */
+ st->buf[2] = 0x00;
+ st->buf[3] = st->fract2 & 0xFF;
+ st->buf[4] = st->fract2 >> 7;
+ st->buf[5] = st->fract2 >> 15;
+ st->buf[6] = ADF4371_FRAC2WORD_L(st->fract2 & 0x7F) |
+ ADF4371_FRAC1WORD(st->fract1 >> 23);
+ st->buf[7] = ADF4371_FRAC2WORD_H(st->fract2 >> 7);
+ st->buf[8] = st->mod2 & 0xFF;
+ st->buf[9] = ADF4371_MOD2WORD(st->mod2 >> 8);
+
+ ret = regmap_bulk_write(st->regmap, ADF4371_REG(0x11), st->buf, 10);
+ if (ret < 0)
+ return ret;
+ /*
+ * The R counter allows the input reference frequency to be
+ * divided down to produce the reference clock to the PFD
+ */
+ ret = regmap_write(st->regmap, ADF4371_REG(0x1F), st->ref_div_factor);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(st->regmap, ADF4371_REG(0x24),
+ ADF4371_RF_DIV_SEL_MSK,
+ ADF4371_RF_DIV_SEL(st->rf_div_sel));
+ if (ret < 0)
+ return ret;
+
+ cp_bleed = DIV_ROUND_UP(400 * 1750, st->integer * 375);
+ cp_bleed = clamp(cp_bleed, 1U, 255U);
+ ret = regmap_write(st->regmap, ADF4371_REG(0x26), cp_bleed);
+ if (ret < 0)
+ return ret;
+ /*
+ * Set to 1 when in INT mode (when FRAC1 = FRAC2 = 0),
+ * and set to 0 when in FRAC mode.
+ */
+ if (st->fract1 == 0 && st->fract2 == 0)
+ int_mode = 0x01;
+
+ ret = regmap_write(st->regmap, ADF4371_REG(0x2B), int_mode);
+ if (ret < 0)
+ return ret;
+
+ return regmap_write(st->regmap, ADF4371_REG(0x10), st->integer & 0xFF);
+}
+
+static ssize_t adf4371_read(struct iio_dev *indio_dev,
+ uintptr_t private,
+ const struct iio_chan_spec *chan,
+ char *buf)
+{
+ struct adf4371_state *st = iio_priv(indio_dev);
+ unsigned long long val = 0;
+ unsigned int readval, reg, bit;
+ int ret;
+
+ switch ((u32)private) {
+ case ADF4371_FREQ:
+ val = adf4371_pll_fract_n_get_rate(st, chan->channel);
+ ret = regmap_read(st->regmap, ADF4371_REG(0x7C), &readval);
+ if (ret < 0)
+ break;
+
+ if (readval == 0x00) {
+ dev_dbg(&st->spi->dev, "PLL un-locked\n");
+ ret = -EBUSY;
+ }
+ break;
+ case ADF4371_POWER_DOWN:
+ reg = adf4371_pwrdown_ch[chan->channel].reg;
+ bit = adf4371_pwrdown_ch[chan->channel].bit;
+
+ ret = regmap_read(st->regmap, reg, &readval);
+ if (ret < 0)
+ break;
+
+ val = !(readval & BIT(bit));
+ break;
+ case ADF4371_CHANNEL_NAME:
+ return sprintf(buf, "%s\n", adf4371_ch_names[chan->channel]);
+ default:
+ ret = -EINVAL;
+ val = 0;
+ break;
+ }
+
+ return ret < 0 ? ret : sprintf(buf, "%llu\n", val);
+}
+
+static ssize_t adf4371_write(struct iio_dev *indio_dev,
+ uintptr_t private,
+ const struct iio_chan_spec *chan,
+ const char *buf, size_t len)
+{
+ struct adf4371_state *st = iio_priv(indio_dev);
+ unsigned long long freq;
+ bool power_down;
+ unsigned int bit, readval, reg;
+ int ret;
+
+ mutex_lock(&st->lock);
+ switch ((u32)private) {
+ case ADF4371_FREQ:
+ ret = kstrtoull(buf, 10, &freq);
+ if (ret)
+ break;
+
+ ret = adf4371_set_freq(st, freq, chan->channel);
+ break;
+ case ADF4371_POWER_DOWN:
+ ret = kstrtobool(buf, &power_down);
+ if (ret)
+ break;
+
+ reg = adf4371_pwrdown_ch[chan->channel].reg;
+ bit = adf4371_pwrdown_ch[chan->channel].bit;
+ ret = regmap_read(st->regmap, reg, &readval);
+ if (ret < 0)
+ break;
+
+ readval &= ~BIT(bit);
+ readval |= (!power_down << bit);
+
+ ret = regmap_write(st->regmap, reg, readval);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ mutex_unlock(&st->lock);
+
+ return ret ? ret : len;
+}
+
+#define _ADF4371_EXT_INFO(_name, _ident) { \
+ .name = _name, \
+ .read = adf4371_read, \
+ .write = adf4371_write, \
+ .private = _ident, \
+ .shared = IIO_SEPARATE, \
+}
+
+static const struct iio_chan_spec_ext_info adf4371_ext_info[] = {
+ /*
+ * Ideally we use IIO_CHAN_INFO_FREQUENCY, but there are
+ * values > 2^32 in order to support the entire frequency range
+ * in Hz. Using scale is a bit ugly.
+ */
+ _ADF4371_EXT_INFO("frequency", ADF4371_FREQ),
+ _ADF4371_EXT_INFO("powerdown", ADF4371_POWER_DOWN),
+ _ADF4371_EXT_INFO("name", ADF4371_CHANNEL_NAME),
+ { },
+};
+
+#define ADF4371_CHANNEL(index) { \
+ .type = IIO_ALTVOLTAGE, \
+ .output = 1, \
+ .channel = index, \
+ .ext_info = adf4371_ext_info, \
+ .indexed = 1, \
+ }
+
+static const struct iio_chan_spec adf4371_chan[] = {
+ ADF4371_CHANNEL(ADF4371_CH_RF8),
+ ADF4371_CHANNEL(ADF4371_CH_RFAUX8),
+ ADF4371_CHANNEL(ADF4371_CH_RF16),
+ ADF4371_CHANNEL(ADF4371_CH_RF32),
+};
+
+static const struct adf4371_chip_info adf4371_chip_info[] = {
+ [ADF4371] = {
+ .channels = adf4371_chan,
+ .num_channels = 4,
+ },
+ [ADF4372] = {
+ .channels = adf4371_chan,
+ .num_channels = 3,
+ }
+};
+
+static int adf4371_reg_access(struct iio_dev *indio_dev,
+ unsigned int reg,
+ unsigned int writeval,
+ unsigned int *readval)
+{
+ struct adf4371_state *st = iio_priv(indio_dev);
+
+ if (readval)
+ return regmap_read(st->regmap, reg, readval);
+ else
+ return regmap_write(st->regmap, reg, writeval);
+}
+
+static const struct iio_info adf4371_info = {
+ .debugfs_reg_access = &adf4371_reg_access,
+};
+
+static int adf4371_setup(struct adf4371_state *st)
+{
+ unsigned int synth_timeout = 2, timeout = 1, vco_alc_timeout = 1;
+ unsigned int vco_band_div, tmp;
+ int ret;
+
+ /* Perform a software reset */
+ ret = regmap_write(st->regmap, ADF4371_REG(0x0), ADF4371_RESET_CMD);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_multi_reg_write(st->regmap, adf4371_reg_defaults,
+ ARRAY_SIZE(adf4371_reg_defaults));
+ if (ret < 0)
+ return ret;
+
+ /* Mute to Lock Detect */
+ if (device_property_read_bool(&st->spi->dev, "adi,mute-till-lock-en")) {
+ ret = regmap_update_bits(st->regmap, ADF4371_REG(0x25),
+ ADF4371_MUTE_LD_MSK,
+ ADF4371_MUTE_LD(1));
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Set address in ascending order, so the bulk_write() will work */
+ ret = regmap_update_bits(st->regmap, ADF4371_REG(0x0),
+ ADF4371_ADDR_ASC_MSK | ADF4371_ADDR_ASC_R_MSK,
+ ADF4371_ADDR_ASC(1) | ADF4371_ADDR_ASC_R(1));
+ if (ret < 0)
+ return ret;
+ /*
+ * Calculate and maximize PFD frequency
+ * fPFD = REFIN × ((1 + D)/(R × (1 + T)))
+ * Where D is the REFIN doubler bit, T is the reference divide by 2,
+ * R is the reference division factor
+ * TODO: it is assumed D and T equal 0.
+ */
+ do {
+ st->ref_div_factor++;
+ st->fpfd = st->clkin_freq / st->ref_div_factor;
+ } while (st->fpfd > ADF4371_MAX_FREQ_PFD);
+
+ /* Calculate Timeouts */
+ vco_band_div = DIV_ROUND_UP(st->fpfd, 2400000U);
+
+ tmp = DIV_ROUND_CLOSEST(st->fpfd, 1000000U);
+ do {
+ timeout++;
+ if (timeout > 1023) {
+ timeout = 2;
+ synth_timeout++;
+ }
+ } while (synth_timeout * 1024 + timeout <= 20 * tmp);
+
+ do {
+ vco_alc_timeout++;
+ } while (vco_alc_timeout * 1024 - timeout <= 50 * tmp);
+
+ st->buf[0] = vco_band_div;
+ st->buf[1] = timeout & 0xFF;
+ st->buf[2] = ADF4371_TIMEOUT(timeout >> 8) | 0x04;
+ st->buf[3] = synth_timeout;
+ st->buf[4] = ADF4371_VCO_ALC_TOUT(vco_alc_timeout);
+
+ return regmap_bulk_write(st->regmap, ADF4371_REG(0x30), st->buf, 5);
+}
+
+static void adf4371_clk_disable(void *data)
+{
+ struct adf4371_state *st = data;
+
+ clk_disable_unprepare(st->clkin);
+}
+
+static int adf4371_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct iio_dev *indio_dev;
+ struct adf4371_state *st;
+ struct regmap *regmap;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ regmap = devm_regmap_init_spi(spi, &adf4371_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
+ PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ st = iio_priv(indio_dev);
+ spi_set_drvdata(spi, indio_dev);
+ st->spi = spi;
+ st->regmap = regmap;
+ mutex_init(&st->lock);
+
+ st->chip_info = &adf4371_chip_info[id->driver_data];
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = id->name;
+ indio_dev->info = &adf4371_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = st->chip_info->channels;
+ indio_dev->num_channels = st->chip_info->num_channels;
+
+ st->clkin = devm_clk_get(&spi->dev, "clkin");
+ if (IS_ERR(st->clkin))
+ return PTR_ERR(st->clkin);
+
+ ret = clk_prepare_enable(st->clkin);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, adf4371_clk_disable, st);
+ if (ret)
+ return ret;
+
+ st->clkin_freq = clk_get_rate(st->clkin);
+
+ ret = adf4371_setup(st);
+ if (ret < 0) {
+ dev_err(&spi->dev, "ADF4371 setup failed\n");
+ return ret;
+ }
+
+ return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id adf4371_id_table[] = {
+ { "adf4371", ADF4371 },
+ { "adf4372", ADF4372 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, adf4371_id_table);
+
+static const struct of_device_id adf4371_of_match[] = {
+ { .compatible = "adi,adf4371" },
+ { .compatible = "adi,adf4372" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, adf4371_of_match);
+
+static struct spi_driver adf4371_driver = {
+ .driver = {
+ .name = "adf4371",
+ .of_match_table = adf4371_of_match,
+ },
+ .probe = adf4371_probe,
+ .id_table = adf4371_id_table,
+};
+module_spi_driver(adf4371_driver);
+
+MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADF4371 SPI PLL");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
index c8159205c77d..f5128d8f777a 100644
--- a/drivers/iio/humidity/dht11.c
+++ b/drivers/iio/humidity/dht11.c
@@ -22,8 +22,7 @@
#include <linux/completion.h>
#include <linux/mutex.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/timekeeping.h>
#include <linux/iio/iio.h>
@@ -72,7 +71,7 @@
struct dht11 {
struct device *dev;
- int gpio;
+ struct gpio_desc *gpiod;
int irq;
struct completion completion;
@@ -179,7 +178,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data)
if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns();
dht11->edges[dht11->num_edges++].value =
- gpio_get_value(dht11->gpio);
+ gpiod_get_value(dht11->gpiod);
if (dht11->num_edges >= DHT11_EDGES_PER_READ)
complete(&dht11->completion);
@@ -217,12 +216,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
reinit_completion(&dht11->completion);
dht11->num_edges = 0;
- ret = gpio_direction_output(dht11->gpio, 0);
+ ret = gpiod_direction_output(dht11->gpiod, 0);
if (ret)
goto err;
usleep_range(DHT11_START_TRANSMISSION_MIN,
DHT11_START_TRANSMISSION_MAX);
- ret = gpio_direction_input(dht11->gpio);
+ ret = gpiod_direction_input(dht11->gpiod);
if (ret)
goto err;
@@ -294,10 +293,8 @@ MODULE_DEVICE_TABLE(of, dht11_dt_ids);
static int dht11_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *node = dev->of_node;
struct dht11 *dht11;
struct iio_dev *iio;
- int ret;
iio = devm_iio_device_alloc(dev, sizeof(*dht11));
if (!iio) {
@@ -307,18 +304,13 @@ static int dht11_probe(struct platform_device *pdev)
dht11 = iio_priv(iio);
dht11->dev = dev;
+ dht11->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
+ if (IS_ERR(dht11->gpiod))
+ return PTR_ERR(dht11->gpiod);
- ret = of_get_gpio(node, 0);
- if (ret < 0)
- return ret;
- dht11->gpio = ret;
- ret = devm_gpio_request_one(dev, dht11->gpio, GPIOF_IN, pdev->name);
- if (ret)
- return ret;
-
- dht11->irq = gpio_to_irq(dht11->gpio);
+ dht11->irq = gpiod_to_irq(dht11->gpiod);
if (dht11->irq < 0) {
- dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
+ dev_err(dev, "GPIO %d has no interrupt\n", desc_to_gpio(dht11->gpiod));
return -EINVAL;
}
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 5e461f0e759c..c14bf533b66b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -197,7 +197,7 @@ struct st_lsm6dsx_ext_dev_settings {
* struct st_lsm6dsx_settings - ST IMU sensor settings
* @wai: Sensor WhoAmI default value.
* @max_fifo_size: Sensor max fifo length in FIFO words.
- * @id: List of hw id supported by the driver configuration.
+ * @id: List of hw id/device name supported by the driver configuration.
* @decimator: List of decimator register info (addr + mask).
* @batch: List of FIFO batching register info (addr + mask).
* @fifo_ops: Sensor hw FIFO parameters.
@@ -207,7 +207,10 @@ struct st_lsm6dsx_ext_dev_settings {
struct st_lsm6dsx_settings {
u8 wai;
u16 max_fifo_size;
- enum st_lsm6dsx_hw_id id[ST_LSM6DSX_MAX_ID];
+ struct {
+ enum st_lsm6dsx_hw_id hw_id;
+ const char *name;
+ } id[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_fifo_ops fifo_ops;
@@ -303,7 +306,7 @@ struct st_lsm6dsx_hw {
static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
-int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
+int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
struct regmap *regmap);
int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
bool enable);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index fd95d924a996..a6702a74570e 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -124,7 +124,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.wai = 0x69,
.max_fifo_size = 1365,
.id = {
- [0] = ST_LSM6DS3_ID,
+ {
+ .hw_id = ST_LSM6DS3_ID,
+ .name = ST_LSM6DS3_DEV_NAME,
+ },
},
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
@@ -171,7 +174,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.wai = 0x69,
.max_fifo_size = 682,
.id = {
- [0] = ST_LSM6DS3H_ID,
+ {
+ .hw_id = ST_LSM6DS3H_ID,
+ .name = ST_LSM6DS3H_DEV_NAME,
+ },
},
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
@@ -218,9 +224,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.wai = 0x6a,
.max_fifo_size = 682,
.id = {
- [0] = ST_LSM6DSL_ID,
- [1] = ST_LSM6DSM_ID,
- [2] = ST_ISM330DLC_ID,
+ {
+ .hw_id = ST_LSM6DSL_ID,
+ .name = ST_LSM6DSL_DEV_NAME,
+ }, {
+ .hw_id = ST_LSM6DSM_ID,
+ .name = ST_LSM6DSM_DEV_NAME,
+ }, {
+ .hw_id = ST_ISM330DLC_ID,
+ .name = ST_ISM330DLC_DEV_NAME,
+ },
},
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
@@ -267,8 +280,13 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.wai = 0x6c,
.max_fifo_size = 512,
.id = {
- [0] = ST_LSM6DSO_ID,
- [1] = ST_LSM6DSOX_ID,
+ {
+ .hw_id = ST_LSM6DSO_ID,
+ .name = ST_LSM6DSO_DEV_NAME,
+ }, {
+ .hw_id = ST_LSM6DSOX_ID,
+ .name = ST_LSM6DSOX_DEV_NAME,
+ },
},
.batch = {
[ST_LSM6DSX_ID_ACC] = {
@@ -333,7 +351,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.wai = 0x6b,
.max_fifo_size = 512,
.id = {
- [0] = ST_ASM330LHH_ID,
+ {
+ .hw_id = ST_ASM330LHH_ID,
+ .name = ST_ASM330LHH_DEV_NAME,
+ },
},
.batch = {
[ST_LSM6DSX_ID_ACC] = {
@@ -372,7 +393,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.wai = 0x6b,
.max_fifo_size = 512,
.id = {
- [0] = ST_LSM6DSR_ID,
+ {
+ .hw_id = ST_LSM6DSR_ID,
+ .name = ST_LSM6DSR_DEV_NAME,
+ },
},
.batch = {
[ST_LSM6DSX_ID_ACC] = {
@@ -470,13 +494,14 @@ int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
return err;
}
-static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id)
+static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id,
+ const char **name)
{
int err, i, j, data;
for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_sensor_settings); i++) {
for (j = 0; j < ST_LSM6DSX_MAX_ID; j++) {
- if (id == st_lsm6dsx_sensor_settings[i].id[j])
+ if (id == st_lsm6dsx_sensor_settings[i].id[j].hw_id)
break;
}
if (j < ST_LSM6DSX_MAX_ID)
@@ -499,6 +524,7 @@ static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id)
return -ENODEV;
}
+ *name = st_lsm6dsx_sensor_settings[i].id[j].name;
hw->settings = &st_lsm6dsx_sensor_settings[i];
return 0;
@@ -1040,11 +1066,12 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
return iio_dev;
}
-int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
+int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
struct regmap *regmap)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
struct st_lsm6dsx_hw *hw;
+ const char *name = NULL;
int i, err;
hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
@@ -1065,7 +1092,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
hw->irq = irq;
hw->regmap = regmap;
- err = st_lsm6dsx_check_whoami(hw, hw_id);
+ err = st_lsm6dsx_check_whoami(hw, hw_id, &name);
if (err < 0)
return err;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 966d52a4bf1d..b3211e0ac07b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -35,8 +35,7 @@ static int st_lsm6dsx_i2c_probe(struct i2c_client *client,
return PTR_ERR(regmap);
}
- return st_lsm6dsx_probe(&client->dev, client->irq,
- hw_id, id->name, regmap);
+ return st_lsm6dsx_probe(&client->dev, client->irq, hw_id, regmap);
}
static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index 24e4e50414e6..c9d3c4711018 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -35,8 +35,7 @@ static int st_lsm6dsx_spi_probe(struct spi_device *spi)
return PTR_ERR(regmap);
}
- return st_lsm6dsx_probe(&spi->dev, spi->irq,
- hw_id, id->name, regmap);
+ return st_lsm6dsx_probe(&spi->dev, spi->irq, hw_id, regmap);
}
static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 245b5844028d..65de9980b82c 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -366,39 +366,25 @@ static void iio_device_unregister_debugfs(struct iio_dev *indio_dev)
debugfs_remove_recursive(indio_dev->debugfs_dentry);
}
-static int iio_device_register_debugfs(struct iio_dev *indio_dev)
+static void iio_device_register_debugfs(struct iio_dev *indio_dev)
{
- struct dentry *d;
-
if (indio_dev->info->debugfs_reg_access == NULL)
- return 0;
+ return;
if (!iio_debugfs_dentry)
- return 0;
+ return;
indio_dev->debugfs_dentry =
debugfs_create_dir(dev_name(&indio_dev->dev),
iio_debugfs_dentry);
- if (indio_dev->debugfs_dentry == NULL) {
- dev_warn(indio_dev->dev.parent,
- "Failed to create debugfs directory\n");
- return -EFAULT;
- }
-
- d = debugfs_create_file("direct_reg_access", 0644,
- indio_dev->debugfs_dentry,
- indio_dev, &iio_debugfs_reg_fops);
- if (!d) {
- iio_device_unregister_debugfs(indio_dev);
- return -ENOMEM;
- }
- return 0;
+ debugfs_create_file("direct_reg_access", 0644,
+ indio_dev->debugfs_dentry, indio_dev,
+ &iio_debugfs_reg_fops);
}
#else
-static int iio_device_register_debugfs(struct iio_dev *indio_dev)
+static void iio_device_register_debugfs(struct iio_dev *indio_dev)
{
- return 0;
}
static void iio_device_unregister_debugfs(struct iio_dev *indio_dev)
@@ -1104,6 +1090,8 @@ static int iio_device_add_info_mask_type_avail(struct iio_dev *indio_dev,
char *avail_postfix;
for_each_set_bit(i, infomask, sizeof(*infomask) * 8) {
+ if (i >= ARRAY_SIZE(iio_chan_info_postfix))
+ return -EINVAL;
avail_postfix = kasprintf(GFP_KERNEL,
"%s_available",
iio_chan_info_postfix[i]);
@@ -1669,12 +1657,7 @@ int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod)
/* configure elements for the chrdev */
indio_dev->dev.devt = MKDEV(MAJOR(iio_devt), indio_dev->id);
- ret = iio_device_register_debugfs(indio_dev);
- if (ret) {
- dev_err(indio_dev->dev.parent,
- "Failed to register debugfs interfaces\n");
- return ret;
- }
+ iio_device_register_debugfs(indio_dev);
ret = iio_buffer_alloc_sysfs_and_mask(indio_dev);
if (ret) {
diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c
index 340d64d0ac59..a8361006dcd9 100644
--- a/drivers/iio/light/bh1780.c
+++ b/drivers/iio/light/bh1780.c
@@ -146,7 +146,7 @@ static int bh1780_probe(struct i2c_client *client,
{
int ret;
struct bh1780_data *bh1780;
- struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct i2c_adapter *adapter = client->adapter;
struct iio_dev *indio_dev;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
index eff7ac9ae669..b955183edfe8 100644
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -37,6 +37,7 @@
#define STK3310_CHIP_ID_VAL 0x13
#define STK3311_CHIP_ID_VAL 0x1D
+#define STK3335_CHIP_ID_VAL 0x51
#define STK3310_PSINT_EN 0x01
#define STK3310_PS_MAX_VAL 0xFFFF
@@ -451,7 +452,8 @@ static int stk3310_init(struct iio_dev *indio_dev)
return ret;
if (chipid != STK3310_CHIP_ID_VAL &&
- chipid != STK3311_CHIP_ID_VAL) {
+ chipid != STK3311_CHIP_ID_VAL &&
+ chipid != STK3335_CHIP_ID_VAL) {
dev_err(&client->dev, "invalid chip id: 0x%x\n", chipid);
return -ENODEV;
}
@@ -663,6 +665,7 @@ static SIMPLE_DEV_PM_OPS(stk3310_pm_ops, stk3310_suspend, stk3310_resume);
static const struct i2c_device_id stk3310_i2c_id[] = {
{"STK3310", 0},
{"STK3311", 0},
+ {"STK3335", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, stk3310_i2c_id);
@@ -670,6 +673,7 @@ MODULE_DEVICE_TABLE(i2c, stk3310_i2c_id);
static const struct acpi_device_id stk3310_acpi_id[] = {
{"STK3310", 0},
{"STK3311", 0},
+ {"STK3335", 0},
{}
};
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index b191811fd749..ba420e484787 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -53,6 +53,17 @@ config IIO_CROS_EC_BARO
To compile this driver as a module, choose M here: the module
will be called cros_ec_baro.
+config DPS310
+ tristate "Infineon DPS310 pressure and temperature sensor"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Support for the Infineon DPS310 digital barometric pressure sensor.
+ It can be accessed over I2C bus.
+
+ This driver can also be built as a module. If so, the module will be
+ called dps310.
+
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
select IIO_BUFFER
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index c2058d7b2f93..d8f5ace1f25d 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_BMP280) += bmp280.o
bmp280-objs := bmp280-core.o bmp280-regmap.o
obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o
obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o
+obj-$(CONFIG_DPS310) += dps310.o
obj-$(CONFIG_IIO_CROS_EC_BARO) += cros_ec_baro.o
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
obj-$(CONFIG_HP03) += hp03.o
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
new file mode 100644
index 000000000000..2c1943bbc433
--- /dev/null
+++ b/drivers/iio/pressure/dps310.c
@@ -0,0 +1,827 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright IBM Corp 2019
+/*
+ * The DPS310 is a barometric pressure and temperature sensor.
+ * Currently only reading a single temperature is supported by
+ * this driver.
+ *
+ * https://www.infineon.com/dgdl/?fileId=5546d462576f34750157750826c42242
+ *
+ * Temperature calculation:
+ * c0 * 0.5 + c1 * T_raw / kT °C
+ *
+ * TODO:
+ * - Optionally support the FIFO
+ */
+
+#include <linux/i2c.h>
+#include <linux/limits.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define DPS310_DEV_NAME "dps310"
+
+#define DPS310_PRS_B0 0x00
+#define DPS310_PRS_B1 0x01
+#define DPS310_PRS_B2 0x02
+#define DPS310_TMP_B0 0x03
+#define DPS310_TMP_B1 0x04
+#define DPS310_TMP_B2 0x05
+#define DPS310_PRS_CFG 0x06
+#define DPS310_PRS_RATE_BITS GENMASK(6, 4)
+#define DPS310_PRS_PRC_BITS GENMASK(3, 0)
+#define DPS310_TMP_CFG 0x07
+#define DPS310_TMP_RATE_BITS GENMASK(6, 4)
+#define DPS310_TMP_PRC_BITS GENMASK(3, 0)
+#define DPS310_TMP_EXT BIT(7)
+#define DPS310_MEAS_CFG 0x08
+#define DPS310_MEAS_CTRL_BITS GENMASK(2, 0)
+#define DPS310_PRS_EN BIT(0)
+#define DPS310_TEMP_EN BIT(1)
+#define DPS310_BACKGROUND BIT(2)
+#define DPS310_PRS_RDY BIT(4)
+#define DPS310_TMP_RDY BIT(5)
+#define DPS310_SENSOR_RDY BIT(6)
+#define DPS310_COEF_RDY BIT(7)
+#define DPS310_CFG_REG 0x09
+#define DPS310_INT_HL BIT(7)
+#define DPS310_TMP_SHIFT_EN BIT(3)
+#define DPS310_PRS_SHIFT_EN BIT(4)
+#define DPS310_FIFO_EN BIT(5)
+#define DPS310_SPI_EN BIT(6)
+#define DPS310_RESET 0x0c
+#define DPS310_RESET_MAGIC 0x09
+#define DPS310_COEF_BASE 0x10
+
+/* Make sure sleep time is <= 20ms for usleep_range */
+#define DPS310_POLL_SLEEP_US(t) min(20000, (t) / 8)
+/* Silently handle error in rate value here */
+#define DPS310_POLL_TIMEOUT_US(rc) ((rc) <= 0 ? 1000000 : 1000000 / (rc))
+
+#define DPS310_PRS_BASE DPS310_PRS_B0
+#define DPS310_TMP_BASE DPS310_TMP_B0
+
+/*
+ * These values (defined in the spec) indicate how to scale the raw register
+ * values for each level of precision available.
+ */
+static const int scale_factors[] = {
+ 524288,
+ 1572864,
+ 3670016,
+ 7864320,
+ 253952,
+ 516096,
+ 1040384,
+ 2088960,
+};
+
+struct dps310_data {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct mutex lock; /* Lock for sequential HW access functions */
+
+ s32 c0, c1;
+ s32 c00, c10, c20, c30, c01, c11, c21;
+ s32 pressure_raw;
+ s32 temp_raw;
+};
+
+static const struct iio_chan_spec dps310_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+ {
+ .type = IIO_PRESSURE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+};
+
+/* To be called after checking the COEF_RDY bit in MEAS_CFG */
+static int dps310_get_coefs(struct dps310_data *data)
+{
+ int rc;
+ u8 coef[18];
+ u32 c0, c1;
+ u32 c00, c10, c20, c30, c01, c11, c21;
+
+ /* Read all sensor calibration coefficients from the COEF registers. */
+ rc = regmap_bulk_read(data->regmap, DPS310_COEF_BASE, coef,
+ sizeof(coef));
+ if (rc < 0)
+ return rc;
+
+ /*
+ * Calculate temperature calibration coefficients c0 and c1. The
+ * numbers are 12-bit 2's complement numbers.
+ */
+ c0 = (coef[0] << 4) | (coef[1] >> 4);
+ data->c0 = sign_extend32(c0, 11);
+
+ c1 = ((coef[1] & GENMASK(3, 0)) << 8) | coef[2];
+ data->c1 = sign_extend32(c1, 11);
+
+ /*
+ * Calculate pressure calibration coefficients. c00 and c10 are 20 bit
+ * 2's complement numbers, while the rest are 16 bit 2's complement
+ * numbers.
+ */
+ c00 = (coef[3] << 12) | (coef[4] << 4) | (coef[5] >> 4);
+ data->c00 = sign_extend32(c00, 19);
+
+ c10 = ((coef[5] & GENMASK(3, 0)) << 16) | (coef[6] << 8) | coef[7];
+ data->c10 = sign_extend32(c10, 19);
+
+ c01 = (coef[8] << 8) | coef[9];
+ data->c01 = sign_extend32(c01, 15);
+
+ c11 = (coef[10] << 8) | coef[11];
+ data->c11 = sign_extend32(c11, 15);
+
+ c20 = (coef[12] << 8) | coef[13];
+ data->c20 = sign_extend32(c20, 15);
+
+ c21 = (coef[14] << 8) | coef[15];
+ data->c21 = sign_extend32(c21, 15);
+
+ c30 = (coef[16] << 8) | coef[17];
+ data->c30 = sign_extend32(c30, 15);
+
+ return 0;
+}
+
+static int dps310_get_pres_precision(struct dps310_data *data)
+{
+ int rc;
+ int val;
+
+ rc = regmap_read(data->regmap, DPS310_PRS_CFG, &val);
+ if (rc < 0)
+ return rc;
+
+ return BIT(val & GENMASK(2, 0));
+}
+
+static int dps310_get_temp_precision(struct dps310_data *data)
+{
+ int rc;
+ int val;
+
+ rc = regmap_read(data->regmap, DPS310_TMP_CFG, &val);
+ if (rc < 0)
+ return rc;
+
+ /*
+ * Scale factor is bottom 4 bits of the register, but 1111 is
+ * reserved so just grab bottom three
+ */
+ return BIT(val & GENMASK(2, 0));
+}
+
+/* Called with lock held */
+static int dps310_set_pres_precision(struct dps310_data *data, int val)
+{
+ int rc;
+ u8 shift_en;
+
+ if (val < 0 || val > 128)
+ return -EINVAL;
+
+ shift_en = val >= 16 ? DPS310_PRS_SHIFT_EN : 0;
+ rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
+ DPS310_PRS_SHIFT_EN, shift_en);
+ if (rc)
+ return rc;
+
+ return regmap_update_bits(data->regmap, DPS310_PRS_CFG,
+ DPS310_PRS_PRC_BITS, ilog2(val));
+}
+
+/* Called with lock held */
+static int dps310_set_temp_precision(struct dps310_data *data, int val)
+{
+ int rc;
+ u8 shift_en;
+
+ if (val < 0 || val > 128)
+ return -EINVAL;
+
+ shift_en = val >= 16 ? DPS310_TMP_SHIFT_EN : 0;
+ rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
+ DPS310_TMP_SHIFT_EN, shift_en);
+ if (rc)
+ return rc;
+
+ return regmap_update_bits(data->regmap, DPS310_TMP_CFG,
+ DPS310_TMP_PRC_BITS, ilog2(val));
+}
+
+/* Called with lock held */
+static int dps310_set_pres_samp_freq(struct dps310_data *data, int freq)
+{
+ u8 val;
+
+ if (freq < 0 || freq > 128)
+ return -EINVAL;
+
+ val = ilog2(freq) << 4;
+
+ return regmap_update_bits(data->regmap, DPS310_PRS_CFG,
+ DPS310_PRS_RATE_BITS, val);
+}
+
+/* Called with lock held */
+static int dps310_set_temp_samp_freq(struct dps310_data *data, int freq)
+{
+ u8 val;
+
+ if (freq < 0 || freq > 128)
+ return -EINVAL;
+
+ val = ilog2(freq) << 4;
+
+ return regmap_update_bits(data->regmap, DPS310_TMP_CFG,
+ DPS310_TMP_RATE_BITS, val);
+}
+
+static int dps310_get_pres_samp_freq(struct dps310_data *data)
+{
+ int rc;
+ int val;
+
+ rc = regmap_read(data->regmap, DPS310_PRS_CFG, &val);
+ if (rc < 0)
+ return rc;
+
+ return BIT((val & DPS310_PRS_RATE_BITS) >> 4);
+}
+
+static int dps310_get_temp_samp_freq(struct dps310_data *data)
+{
+ int rc;
+ int val;
+
+ rc = regmap_read(data->regmap, DPS310_TMP_CFG, &val);
+ if (rc < 0)
+ return rc;
+
+ return BIT((val & DPS310_TMP_RATE_BITS) >> 4);
+}
+
+static int dps310_get_pres_k(struct dps310_data *data)
+{
+ int rc = dps310_get_pres_precision(data);
+
+ if (rc < 0)
+ return rc;
+
+ return scale_factors[ilog2(rc)];
+}
+
+static int dps310_get_temp_k(struct dps310_data *data)
+{
+ int rc = dps310_get_temp_precision(data);
+
+ if (rc < 0)
+ return rc;
+
+ return scale_factors[ilog2(rc)];
+}
+
+static int dps310_read_pres_raw(struct dps310_data *data)
+{
+ int rc;
+ int rate;
+ int ready;
+ int timeout;
+ s32 raw;
+ u8 val[3];
+
+ if (mutex_lock_interruptible(&data->lock))
+ return -EINTR;
+
+ rate = dps310_get_pres_samp_freq(data);
+ timeout = DPS310_POLL_TIMEOUT_US(rate);
+
+ /* Poll for sensor readiness; base the timeout upon the sample rate. */
+ rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
+ ready & DPS310_PRS_RDY,
+ DPS310_POLL_SLEEP_US(timeout), timeout);
+ if (rc)
+ goto done;
+
+ rc = regmap_bulk_read(data->regmap, DPS310_PRS_BASE, val, sizeof(val));
+ if (rc < 0)
+ goto done;
+
+ raw = (val[0] << 16) | (val[1] << 8) | val[2];
+ data->pressure_raw = sign_extend32(raw, 23);
+
+done:
+ mutex_unlock(&data->lock);
+ return rc;
+}
+
+/* Called with lock held */
+static int dps310_read_temp_ready(struct dps310_data *data)
+{
+ int rc;
+ u8 val[3];
+ s32 raw;
+
+ rc = regmap_bulk_read(data->regmap, DPS310_TMP_BASE, val, sizeof(val));
+ if (rc < 0)
+ return rc;
+
+ raw = (val[0] << 16) | (val[1] << 8) | val[2];
+ data->temp_raw = sign_extend32(raw, 23);
+
+ return 0;
+}
+
+static int dps310_read_temp_raw(struct dps310_data *data)
+{
+ int rc;
+ int rate;
+ int ready;
+ int timeout;
+
+ if (mutex_lock_interruptible(&data->lock))
+ return -EINTR;
+
+ rate = dps310_get_temp_samp_freq(data);
+ timeout = DPS310_POLL_TIMEOUT_US(rate);
+
+ /* Poll for sensor readiness; base the timeout upon the sample rate. */
+ rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
+ ready & DPS310_TMP_RDY,
+ DPS310_POLL_SLEEP_US(timeout), timeout);
+ if (rc < 0)
+ goto done;
+
+ rc = dps310_read_temp_ready(data);
+
+done:
+ mutex_unlock(&data->lock);
+ return rc;
+}
+
+static bool dps310_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case DPS310_PRS_CFG:
+ case DPS310_TMP_CFG:
+ case DPS310_MEAS_CFG:
+ case DPS310_CFG_REG:
+ case DPS310_RESET:
+ /* No documentation available on the registers below */
+ case 0x0e:
+ case 0x0f:
+ case 0x62:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool dps310_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case DPS310_PRS_B0:
+ case DPS310_PRS_B1:
+ case DPS310_PRS_B2:
+ case DPS310_TMP_B0:
+ case DPS310_TMP_B1:
+ case DPS310_TMP_B2:
+ case DPS310_MEAS_CFG:
+ case 0x32: /* No documentation available on this register */
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int dps310_write_raw(struct iio_dev *iio,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ int rc;
+ struct dps310_data *data = iio_priv(iio);
+
+ if (mutex_lock_interruptible(&data->lock))
+ return -EINTR;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ rc = dps310_set_pres_samp_freq(data, val);
+ break;
+
+ case IIO_TEMP:
+ rc = dps310_set_temp_samp_freq(data, val);
+ break;
+
+ default:
+ rc = -EINVAL;
+ break;
+ }
+ break;
+
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ rc = dps310_set_pres_precision(data, val);
+ break;
+
+ case IIO_TEMP:
+ rc = dps310_set_temp_precision(data, val);
+ break;
+
+ default:
+ rc = -EINVAL;
+ break;
+ }
+ break;
+
+ default:
+ rc = -EINVAL;
+ break;
+ }
+
+ mutex_unlock(&data->lock);
+ return rc;
+}
+
+static int dps310_calculate_pressure(struct dps310_data *data)
+{
+ int i;
+ int rc;
+ int t_ready;
+ int kpi = dps310_get_pres_k(data);
+ int kti = dps310_get_temp_k(data);
+ s64 rem = 0ULL;
+ s64 pressure = 0ULL;
+ s64 p;
+ s64 t;
+ s64 denoms[7];
+ s64 nums[7];
+ s64 rems[7];
+ s64 kp;
+ s64 kt;
+
+ if (kpi < 0)
+ return kpi;
+
+ if (kti < 0)
+ return kti;
+
+ kp = (s64)kpi;
+ kt = (s64)kti;
+
+ /* Refresh temp if it's ready, otherwise just use the latest value */
+ if (mutex_trylock(&data->lock)) {
+ rc = regmap_read(data->regmap, DPS310_MEAS_CFG, &t_ready);
+ if (rc >= 0 && t_ready & DPS310_TMP_RDY)
+ dps310_read_temp_ready(data);
+
+ mutex_unlock(&data->lock);
+ }
+
+ p = (s64)data->pressure_raw;
+ t = (s64)data->temp_raw;
+
+ /* Section 4.9.1 of the DPS310 spec; algebra'd to avoid underflow */
+ nums[0] = (s64)data->c00;
+ denoms[0] = 1LL;
+ nums[1] = p * (s64)data->c10;
+ denoms[1] = kp;
+ nums[2] = p * p * (s64)data->c20;
+ denoms[2] = kp * kp;
+ nums[3] = p * p * p * (s64)data->c30;
+ denoms[3] = kp * kp * kp;
+ nums[4] = t * (s64)data->c01;
+ denoms[4] = kt;
+ nums[5] = t * p * (s64)data->c11;
+ denoms[5] = kp * kt;
+ nums[6] = t * p * p * (s64)data->c21;
+ denoms[6] = kp * kp * kt;
+
+ /* Kernel lacks a div64_s64_rem function; denoms are all positive */
+ for (i = 0; i < 7; ++i) {
+ u64 irem;
+
+ if (nums[i] < 0LL) {
+ pressure -= div64_u64_rem(-nums[i], denoms[i], &irem);
+ rems[i] = -irem;
+ } else {
+ pressure += div64_u64_rem(nums[i], denoms[i], &irem);
+ rems[i] = (s64)irem;
+ }
+ }
+
+ /* Increase precision and calculate the remainder sum */
+ for (i = 0; i < 7; ++i)
+ rem += div64_s64((s64)rems[i] * 1000000000LL, denoms[i]);
+
+ pressure += div_s64(rem, 1000000000LL);
+ if (pressure < 0LL)
+ return -ERANGE;
+
+ return (int)min_t(s64, pressure, INT_MAX);
+}
+
+static int dps310_read_pressure(struct dps310_data *data, int *val, int *val2,
+ long mask)
+{
+ int rc;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ rc = dps310_get_pres_samp_freq(data);
+ if (rc < 0)
+ return rc;
+
+ *val = rc;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_PROCESSED:
+ rc = dps310_read_pres_raw(data);
+ if (rc)
+ return rc;
+
+ rc = dps310_calculate_pressure(data);
+ if (rc < 0)
+ return rc;
+
+ *val = rc;
+ *val2 = 1000; /* Convert Pa to KPa per IIO ABI */
+ return IIO_VAL_FRACTIONAL;
+
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ rc = dps310_get_pres_precision(data);
+ if (rc < 0)
+ return rc;
+
+ *val = rc;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int dps310_calculate_temp(struct dps310_data *data)
+{
+ s64 c0;
+ s64 t;
+ int kt = dps310_get_temp_k(data);
+
+ if (kt < 0)
+ return kt;
+
+ /* Obtain inverse-scaled offset */
+ c0 = div_s64((s64)kt * (s64)data->c0, 2);
+
+ /* Add the offset to the unscaled temperature */
+ t = c0 + ((s64)data->temp_raw * (s64)data->c1);
+
+ /* Convert to milliCelsius and scale the temperature */
+ return (int)div_s64(t * 1000LL, kt);
+}
+
+static int dps310_read_temp(struct dps310_data *data, int *val, int *val2,
+ long mask)
+{
+ int rc;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ rc = dps310_get_temp_samp_freq(data);
+ if (rc < 0)
+ return rc;
+
+ *val = rc;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_PROCESSED:
+ rc = dps310_read_temp_raw(data);
+ if (rc)
+ return rc;
+
+ rc = dps310_calculate_temp(data);
+ if (rc < 0)
+ return rc;
+
+ *val = rc;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ rc = dps310_get_temp_precision(data);
+ if (rc < 0)
+ return rc;
+
+ *val = rc;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int dps310_read_raw(struct iio_dev *iio,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct dps310_data *data = iio_priv(iio);
+
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ return dps310_read_pressure(data, val, val2, mask);
+
+ case IIO_TEMP:
+ return dps310_read_temp(data, val, val2, mask);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static void dps310_reset(void *action_data)
+{
+ struct dps310_data *data = action_data;
+
+ regmap_write(data->regmap, DPS310_RESET, DPS310_RESET_MAGIC);
+}
+
+static const struct regmap_config dps310_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .writeable_reg = dps310_is_writeable_reg,
+ .volatile_reg = dps310_is_volatile_reg,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = 0x62, /* No documentation available on this register */
+};
+
+static const struct iio_info dps310_info = {
+ .read_raw = dps310_read_raw,
+ .write_raw = dps310_write_raw,
+};
+
+/*
+ * Some verions of chip will read temperatures in the ~60C range when
+ * its actually ~20C. This is the manufacturer recommended workaround
+ * to correct the issue. The registers used below are undocumented.
+ */
+static int dps310_temp_workaround(struct dps310_data *data)
+{
+ int rc;
+ int reg;
+
+ rc = regmap_read(data->regmap, 0x32, &reg);
+ if (rc < 0)
+ return rc;
+
+ /*
+ * If bit 1 is set then the device is okay, and the workaround does not
+ * need to be applied
+ */
+ if (reg & BIT(1))
+ return 0;
+
+ rc = regmap_write(data->regmap, 0x0e, 0xA5);
+ if (rc < 0)
+ return rc;
+
+ rc = regmap_write(data->regmap, 0x0f, 0x96);
+ if (rc < 0)
+ return rc;
+
+ rc = regmap_write(data->regmap, 0x62, 0x02);
+ if (rc < 0)
+ return rc;
+
+ rc = regmap_write(data->regmap, 0x0e, 0x00);
+ if (rc < 0)
+ return rc;
+
+ return regmap_write(data->regmap, 0x0f, 0x00);
+}
+
+static int dps310_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct dps310_data *data;
+ struct iio_dev *iio;
+ int rc, ready;
+
+ iio = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!iio)
+ return -ENOMEM;
+
+ data = iio_priv(iio);
+ data->client = client;
+ mutex_init(&data->lock);
+
+ iio->dev.parent = &client->dev;
+ iio->name = id->name;
+ iio->channels = dps310_channels;
+ iio->num_channels = ARRAY_SIZE(dps310_channels);
+ iio->info = &dps310_info;
+ iio->modes = INDIO_DIRECT_MODE;
+
+ data->regmap = devm_regmap_init_i2c(client, &dps310_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ /* Register to run the device reset when the device is removed */
+ rc = devm_add_action_or_reset(&client->dev, dps310_reset, data);
+ if (rc)
+ return rc;
+
+ /*
+ * Set up pressure sensor in single sample, one measurement per second
+ * mode
+ */
+ rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0);
+
+ /*
+ * Set up external (MEMS) temperature sensor in single sample, one
+ * measurement per second mode
+ */
+ rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT);
+ if (rc < 0)
+ return rc;
+
+ /* Temp and pressure shifts are disabled when PRC <= 8 */
+ rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
+ DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0);
+ if (rc < 0)
+ return rc;
+
+ /* MEAS_CFG doesn't update correctly unless first written with 0 */
+ rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
+ DPS310_MEAS_CTRL_BITS, 0);
+ if (rc < 0)
+ return rc;
+
+ /* Turn on temperature and pressure measurement in the background */
+ rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
+ DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN |
+ DPS310_TEMP_EN | DPS310_BACKGROUND);
+ if (rc < 0)
+ return rc;
+
+ /*
+ * Calibration coefficients required for reporting temperature.
+ * They are available 40ms after the device has started
+ */
+ rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
+ ready & DPS310_COEF_RDY, 10000, 40000);
+ if (rc < 0)
+ return rc;
+
+ rc = dps310_get_coefs(data);
+ if (rc < 0)
+ return rc;
+
+ rc = dps310_temp_workaround(data);
+ if (rc < 0)
+ return rc;
+
+ rc = devm_iio_device_register(&client->dev, iio);
+ if (rc)
+ return rc;
+
+ i2c_set_clientdata(client, iio);
+
+ return 0;
+}
+
+static const struct i2c_device_id dps310_id[] = {
+ { DPS310_DEV_NAME, 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, dps310_id);
+
+static struct i2c_driver dps310_driver = {
+ .driver = {
+ .name = DPS310_DEV_NAME,
+ },
+ .probe = dps310_probe,
+ .id_table = dps310_id,
+};
+module_i2c_driver(dps310_driver);
+
+MODULE_AUTHOR("Joel Stanley <joel@jms.id.au>");
+MODULE_DESCRIPTION("Infineon DPS310 pressure and temperature sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/accel/adis16203.c b/drivers/staging/iio/accel/adis16203.c
index 70381756a64a..39687139a7d3 100644
--- a/drivers/staging/iio/accel/adis16203.c
+++ b/drivers/staging/iio/accel/adis16203.c
@@ -122,7 +122,7 @@
/* Power supply above 3.625 V */
#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1
-/* Power supply below 3.15 V */
+/* Power supply below 2.975 V */
#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0
/* GLOB_CMD */
@@ -234,7 +234,7 @@ static const char * const adis16203_status_error_msgs[] = {
[ADIS16203_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16203_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
[ADIS16203_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
- [ADIS16203_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+ [ADIS16203_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
};
static const struct adis_data adis16203_data = {
@@ -311,9 +311,17 @@ static int adis16203_remove(struct spi_device *spi)
return 0;
}
+static const struct of_device_id adis16203_of_match[] = {
+ { .compatible = "adi,adis16203" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, adis16203_of_match);
+
static struct spi_driver adis16203_driver = {
.driver = {
.name = "adis16203",
+ .of_match_table = adis16203_of_match,
},
.probe = adis16203_probe,
.remove = adis16203_remove,
diff --git a/drivers/staging/iio/accel/adis16240.c b/drivers/staging/iio/accel/adis16240.c
index b80e0d248b0f..62f4b3b1b457 100644
--- a/drivers/staging/iio/accel/adis16240.c
+++ b/drivers/staging/iio/accel/adis16240.c
@@ -175,7 +175,7 @@
/* Power supply above 3.625 V */
#define ADIS16240_DIAG_STAT_POWER_HIGH_BIT 1
- /* Power supply below 3.15 V */
+ /* Power supply below 2.225 V */
#define ADIS16240_DIAG_STAT_POWER_LOW_BIT 0
/* GLOB_CMD */
@@ -435,9 +435,16 @@ static int adis16240_remove(struct spi_device *spi)
return 0;
}
+static const struct of_device_id adis16240_of_match[] = {
+ { .compatible = "adi,adis16240" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, adis16240_of_match);
+
static struct spi_driver adis16240_driver = {
.driver = {
.name = "adis16240",
+ .of_match_table = adis16240_of_match,
},
.probe = adis16240_probe,
.remove = adis16240_remove,
diff --git a/drivers/staging/iio/addac/adt7316-spi.c b/drivers/staging/iio/addac/adt7316-spi.c
index 2066241b15b1..af513e003da7 100644
--- a/drivers/staging/iio/addac/adt7316-spi.c
+++ b/drivers/staging/iio/addac/adt7316-spi.c
@@ -126,9 +126,22 @@ static const struct spi_device_id adt7316_spi_id[] = {
MODULE_DEVICE_TABLE(spi, adt7316_spi_id);
+static const struct of_device_id adt7316_of_spi_match[] = {
+ { .compatible = "adi,adt7316" },
+ { .compatible = "adi,adt7317" },
+ { .compatible = "adi,adt7318" },
+ { .compatible = "adi,adt7516" },
+ { .compatible = "adi,adt7517" },
+ { .compatible = "adi,adt7519" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, adt7316_of_spi_match);
+
static struct spi_driver adt7316_driver = {
.driver = {
.name = "adt7316",
+ .of_match_table = adt7316_of_spi_match,
.pm = ADT7316_PM_OPS,
},
.probe = adt7316_spi_probe,
diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c
index e075244c602b..f4954d85553e 100644
--- a/drivers/staging/iio/cdc/ad7150.c
+++ b/drivers/staging/iio/cdc/ad7150.c
@@ -46,6 +46,9 @@
#define AD7150_SN0 22
#define AD7150_ID 23
+/* AD7150 masks */
+#define AD7150_THRESHTYPE_MSK GENMASK(6, 5)
+
/**
* struct ad7150_chip_info - instance specific chip data
* @client: i2c client for this device
@@ -138,7 +141,7 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
if (ret < 0)
return ret;
- threshtype = (ret >> 5) & 0x03;
+ threshtype = FIELD_GET(AD7150_THRESHTYPE_MSK, ret);
/*check if threshold mode is fixed or adaptive*/
thrfixed = FIELD_GET(AD7150_CFG_FIX, ret);
@@ -162,7 +165,8 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
return -EINVAL;
}
-/* lock should be held */
+/* state_lock should be held to ensure consistent state*/
+
static int ad7150_write_event_params(struct iio_dev *indio_dev,
unsigned int chan,
enum iio_event_type type,
@@ -201,16 +205,11 @@ static int ad7150_write_event_params(struct iio_dev *indio_dev,
ret = i2c_smbus_write_byte_data(chip->client,
ad7150_addresses[chan][4],
sens);
- if (ret < 0)
+ if (ret)
return ret;
-
- ret = i2c_smbus_write_byte_data(chip->client,
+ return i2c_smbus_write_byte_data(chip->client,
ad7150_addresses[chan][5],
timeout);
- if (ret < 0)
- return ret;
-
- return 0;
}
static int ad7150_write_event_config(struct iio_dev *indio_dev,
@@ -353,8 +352,8 @@ static ssize_t ad7150_show_timeout(struct device *dev,
/* use the event code for consistency reasons */
int chan = IIO_EVENT_CODE_EXTRACT_CHAN(this_attr->address);
- int rising = !!(IIO_EVENT_CODE_EXTRACT_DIR(this_attr->address)
- == IIO_EV_DIR_RISING);
+ int rising = (IIO_EVENT_CODE_EXTRACT_DIR(this_attr->address)
+ == IIO_EV_DIR_RISING) ? 1 : 0;
switch (IIO_EVENT_CODE_EXTRACT_TYPE(this_attr->address)) {
case IIO_EV_TYPE_MAG_ADAPTIVE:
@@ -468,30 +467,21 @@ static const struct iio_event_spec ad7150_events[] = {
},
};
+#define AD7150_CAPACITANCE_CHAN(_chan) { \
+ .type = IIO_CAPACITANCE, \
+ .indexed = 1, \
+ .channel = _chan, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_AVERAGE_RAW), \
+ .event_spec = ad7150_events, \
+ .num_event_specs = ARRAY_SIZE(ad7150_events), \
+ }
+
static const struct iio_chan_spec ad7150_channels[] = {
- {
- .type = IIO_CAPACITANCE,
- .indexed = 1,
- .channel = 0,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_AVERAGE_RAW),
- .event_spec = ad7150_events,
- .num_event_specs = ARRAY_SIZE(ad7150_events),
- }, {
- .type = IIO_CAPACITANCE,
- .indexed = 1,
- .channel = 1,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_AVERAGE_RAW),
- .event_spec = ad7150_events,
- .num_event_specs = ARRAY_SIZE(ad7150_events),
- },
+ AD7150_CAPACITANCE_CHAN(0),
+ AD7150_CAPACITANCE_CHAN(1)
};
-/*
- * threshold events
- */
-
static irqreturn_t ad7150_event_handler(int irq, void *private)
{
struct iio_dev *indio_dev = private;
@@ -580,10 +570,6 @@ static const struct iio_info ad7150_info = {
.write_event_value = &ad7150_write_event_value,
};
-/*
- * device probe and remove
- */
-
static int ad7150_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 47610d863908..21527d84f940 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -748,9 +748,19 @@ static const struct i2c_device_id ad7746_id[] = {
MODULE_DEVICE_TABLE(i2c, ad7746_id);
+static const struct of_device_id ad7746_of_match[] = {
+ { .compatible = "adi,ad7745" },
+ { .compatible = "adi,ad7746" },
+ { .compatible = "adi,ad7747" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, ad7746_of_match);
+
static struct i2c_driver ad7746_driver = {
.driver = {
.name = KBUILD_MODNAME,
+ .of_match_table = ad7746_of_match,
},
.probe = ad7746_probe,
.id_table = ad7746_id,
diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 6de3cd7363d7..038d6732c3fd 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -521,9 +521,20 @@ static const struct spi_device_id ad9834_id[] = {
};
MODULE_DEVICE_TABLE(spi, ad9834_id);
+static const struct of_device_id ad9834_of_match[] = {
+ {.compatible = "adi,ad9833"},
+ {.compatible = "adi,ad9834"},
+ {.compatible = "adi,ad9837"},
+ {.compatible = "adi,ad9838"},
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, ad9834_of_match);
+
static struct spi_driver ad9834_driver = {
.driver = {
.name = "ad9834",
+ .of_match_table = ad9834_of_match
},
.probe = ad9834_probe,
.remove = ad9834_remove,
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index b6be0bc202f5..0c1bd108c386 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -647,9 +647,6 @@ static int ad2s1210_probe(struct spi_device *spi)
struct ad2s1210_state *st;
int ret;
- if (!spi->dev.platform_data)
- return -EINVAL;
-
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
diff --git a/tools/iio/iio_utils.c b/tools/iio/iio_utils.c
index a22b6e8fad46..7399eb7f1378 100644
--- a/tools/iio/iio_utils.c
+++ b/tools/iio/iio_utils.c
@@ -156,9 +156,9 @@ int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
*be = (endianchar == 'b');
*bytes = padint / 8;
if (*bits_used == 64)
- *mask = ~0;
+ *mask = ~(0ULL);
else
- *mask = (1ULL << *bits_used) - 1;
+ *mask = (1ULL << *bits_used) - 1ULL;
*is_signed = (signchar == 's');
if (fclose(sysfsfp)) {