summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt29
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.yaml36
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.yaml25
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi.txt23
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi.yaml807
-rw-r--r--Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt63
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt1
-rw-r--r--Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt54
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt14
-rw-r--r--Documentation/devicetree/bindings/hwmon/pwm-fan.txt2
-rw-r--r--Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt2
-rw-r--r--Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt1
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt7
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt35
-rw-r--r--Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt2
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt4
-rw-r--r--Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt7
-rw-r--r--Documentation/devicetree/bindings/serial/mtk-uart.txt4
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/scpsys.txt5
-rw-r--r--Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt1
-rw-r--r--Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt1
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt7
-rw-r--r--arch/arm/boot/dts/Makefile13
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir2110.dts16
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir3220.dts38
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir5221.dts42
-rw-r--r--arch/arm/boot/dts/am335x-baltos-leds.dtsi6
-rw-r--r--arch/arm/boot/dts/am335x-baltos.dtsi140
-rw-r--r--arch/arm/boot/dts/am335x-base0033.dts48
-rw-r--r--arch/arm/boot/dts/am335x-bone-common.dtsi116
-rw-r--r--arch/arm/boot/dts/am335x-boneblack-common.dtsi54
-rw-r--r--arch/arm/boot/dts/am335x-boneblack-wireless.dts28
-rw-r--r--arch/arm/boot/dts/am335x-boneblue.dts104
-rw-r--r--arch/arm/boot/dts/am335x-bonegreen-common.dtsi4
-rw-r--r--arch/arm/boot/dts/am335x-bonegreen-wireless.dts28
-rw-r--r--arch/arm/boot/dts/am335x-chiliboard.dts66
-rw-r--r--arch/arm/boot/dts/am335x-chilisom.dtsi34
-rw-r--r--arch/arm/boot/dts/am335x-cm-t335.dts190
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts234
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts292
-rw-r--r--arch/arm/boot/dts/am335x-icev2.dts116
-rw-r--r--arch/arm/boot/dts/am335x-igep0033.dtsi40
-rw-r--r--arch/arm/boot/dts/am335x-lxm.dts120
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi42
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-2101.dts24
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts116
-rw-r--r--arch/arm/boot/dts/am335x-nano.dts140
-rw-r--r--arch/arm/boot/dts/am335x-osd3358-sm-red.dts168
-rw-r--r--arch/arm/boot/dts/am335x-osd335x-common.dtsi4
-rw-r--r--arch/arm/boot/dts/am335x-pcm-953.dtsi74
-rw-r--r--arch/arm/boot/dts/am335x-pdu001.dts170
-rw-r--r--arch/arm/boot/dts/am335x-pepper.dts200
-rw-r--r--arch/arm/boot/dts/am335x-phycore-som.dtsi60
-rw-r--r--arch/arm/boot/dts/am335x-pocketbeagle.dts56
-rw-r--r--arch/arm/boot/dts/am335x-sancloud-bbe.dts62
-rw-r--r--arch/arm/boot/dts/am335x-sbc-t335.dts152
-rw-r--r--arch/arm/boot/dts/am335x-shc.dts226
-rw-r--r--arch/arm/boot/dts/am335x-sl50.dts208
-rw-r--r--arch/arm/boot/dts/am335x-wega.dtsi68
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts11
-rw-r--r--arch/arm/boot/dts/am5718.dtsi32
-rw-r--r--arch/arm/boot/dts/am571x-idk.dts2
-rw-r--r--arch/arm/boot/dts/am5728.dtsi33
-rw-r--r--arch/arm/boot/dts/am572x-idk.dts5
-rw-r--r--arch/arm/boot/dts/am5748.dtsi33
-rw-r--r--arch/arm/boot/dts/am574x-idk.dts4
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi2
-rw-r--r--arch/arm/boot/dts/am57xx-cl-som-am57x.dts2
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi2
-rw-r--r--arch/arm/boot/dts/aspeed-ast2500-evb.dts21
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts6
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts5
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts4
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts8
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts52
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi6
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi20
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1.dtsi39
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1_ek.dts39
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts93
-rw-r--r--arch/arm/boot/dts/at91-sama5d4_xplained.dts39
-rw-r--r--arch/arm/boot/dts/at91-sama5d4ek.dts39
-rw-r--r--arch/arm/boot/dts/at91-vinco.dts39
-rw-r--r--arch/arm/boot/dts/at91sam9260ek.dts39
-rw-r--r--arch/arm/boot/dts/at91sam9xe.dtsi39
-rw-r--r--arch/arm/boot/dts/axp81x.dtsi4
-rw-r--r--arch/arm/boot/dts/dra7-l4.dtsi6
-rw-r--r--arch/arm/boot/dts/dra7.dtsi2
-rw-r--r--arch/arm/boot/dts/emev2-kzm9d.dts2
-rw-r--r--arch/arm/boot/dts/exynos3250.dtsi72
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi14
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts4
-rw-r--r--arch/arm/boot/dts/exynos4210-smdkv310.dts4
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts4
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts21
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidu3.dts7
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts3
-rw-r--r--arch/arm/boot/dts/exynos4412-smdk4412.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412-trats2.dts3
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts3
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi40
-rw-r--r--arch/arm/boot/dts/exynos5260-pinctrl.dtsi16
-rw-r--r--arch/arm/boot/dts/exynos5260-xyref5260.dts2
-rw-r--r--arch/arm/boot/dts/exynos5260.dtsi82
-rw-r--r--arch/arm/boot/dts/exynos5410-odroidxu.dts2
-rw-r--r--arch/arm/boot/dts/exynos5410-smdk5410.dts2
-rw-r--r--arch/arm/boot/dts/exynos5420-arndale-octa.dts364
-rw-r--r--arch/arm/boot/dts/exynos5420-smdk5420.dts3
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi5
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos54xx.dtsi38
-rw-r--r--arch/arm/boot/dts/gemini-dlink-dir-685.dts82
-rw-r--r--arch/arm/boot/dts/imx35.dtsi6
-rw-r--r--arch/arm/boot/dts/imx50-kobo-aura.dts258
-rw-r--r--arch/arm/boot/dts/imx50.dtsi23
-rw-r--r--arch/arm/boot/dts/imx51-zii-rdu1.dts38
-rw-r--r--arch/arm/boot/dts/imx51.dtsi2
-rw-r--r--arch/arm/boot/dts/imx53-m53.dtsi2
-rw-r--r--arch/arm/boot/dts/imx53-m53menlo.dts311
-rw-r--r--arch/arm/boot/dts/imx53.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts381
-rw-r--r--arch/arm/boot/dts/imx6dl-sabreauto.dts15
-rw-r--r--arch/arm/boot/dts/imx6q-gw54xx.dts105
-rw-r--r--arch/arm/boot/dts/imx6q-logicpd.dts4
-rw-r--r--arch/arm/boot/dts/imx6q-zii-rdu2.dts38
-rw-r--r--arch/arm/boot/dts/imx6qdl-emcon.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw54xx.dtsi29
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw551x.dtsi138
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw5903.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-var-dart.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi50
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi18
-rw-r--r--arch/arm/boot/dts/imx6qp-zii-rdu2.dts38
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi11
-rw-r--r--arch/arm/boot/dts/imx6sll.dtsi3
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6ul.dtsi4
-rw-r--r--arch/arm/boot/dts/imx7-mba7.dtsi550
-rw-r--r--arch/arm/boot/dts/imx7-tqma7.dtsi249
-rw-r--r--arch/arm/boot/dts/imx7d-mba7.dts119
-rw-r--r--arch/arm/boot/dts/imx7d-tqma7.dtsi11
-rw-r--r--arch/arm/boot/dts/imx7d-zii-rpu2.dts941
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi1
-rw-r--r--arch/arm/boot/dts/imx7s-mba7.dts18
-rw-r--r--arch/arm/boot/dts/imx7s-tqma7.dtsi11
-rw-r--r--arch/arm/boot/dts/imx7s-warp.dts61
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi98
-rw-r--r--arch/arm/boot/dts/imx7ulp.dtsi12
-rw-r--r--arch/arm/boot/dts/lpc3250-ea3250.dts1
-rw-r--r--arch/arm/boot/dts/lpc3250-phy3250.dts3
-rw-r--r--arch/arm/boot/dts/lpc32xx.dtsi38
-rw-r--r--arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts1
-rw-r--r--arch/arm/boot/dts/ls1021a-qds.dts4
-rw-r--r--arch/arm/boot/dts/ls1021a.dtsi1
-rw-r--r--arch/arm/boot/dts/meson.dtsi9
-rw-r--r--arch/arm/boot/dts/meson8.dtsi10
-rw-r--r--arch/arm/boot/dts/meson8b-ec100.dts14
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts66
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi10
-rw-r--r--arch/arm/boot/dts/omap2420-n810.dts2
-rw-r--r--arch/arm/boot/dts/omap4-duovero.dtsi21
-rw-r--r--arch/arm/boot/dts/omap4-l4-abe.dtsi501
-rw-r--r--arch/arm/boot/dts/omap4-mcpdm.dtsi44
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi21
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts21
-rw-r--r--arch/arm/boot/dts/omap4-var-som-om44.dtsi21
-rw-r--r--arch/arm/boot/dts/omap4.dtsi192
-rw-r--r--arch/arm/boot/dts/omap5-board-common.dtsi8
-rw-r--r--arch/arm/boot/dts/omap5-l4-abe.dtsi447
-rw-r--r--arch/arm/boot/dts/omap5.dtsi115
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi6
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom-mdm9615.dtsi1
-rw-r--r--arch/arm/boot/dts/qcom-msm8660.dtsi1
-rw-r--r--arch/arm/boot/dts/qcom-pma8084.dtsi1
-rw-r--r--arch/arm/boot/dts/r7s72100-rskrza1.dts46
-rw-r--r--arch/arm/boot/dts/r8a73a4-ape6evm.dts29
-rw-r--r--arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts123
-rw-r--r--arch/arm/boot/dts/r8a77470.dtsi313
-rw-r--r--arch/arm/boot/dts/r8a7778-bockw.dts2
-rw-r--r--arch/arm/boot/dts/r8a7779-marzen.dts2
-rw-r--r--arch/arm/boot/dts/r8a7792-blanche.dts20
-rw-r--r--arch/arm/boot/dts/r8a7792.dtsi18
-rw-r--r--arch/arm/boot/dts/r8a7794-alt.dts47
-rw-r--r--arch/arm/boot/dts/rk3036-kylin.dts10
-rw-r--r--arch/arm/boot/dts/rk3036.dtsi136
-rw-r--r--arch/arm/boot/dts/rk3066a-marsboard.dts2
-rw-r--r--arch/arm/boot/dts/rk3066a-mk808.dts37
-rw-r--r--arch/arm/boot/dts/rk3066a-rayeager.dts26
-rw-r--r--arch/arm/boot/dts/rk3066a.dtsi239
-rw-r--r--arch/arm/boot/dts/rk3188-px3-evb.dts4
-rw-r--r--arch/arm/boot/dts/rk3188-radxarock.dts14
-rw-r--r--arch/arm/boot/dts/rk3188.dtsi210
-rw-r--r--arch/arm/boot/dts/rk322x.dtsi170
-rw-r--r--arch/arm/boot/dts/rk3288-evb-act8846.dts4
-rw-r--r--arch/arm/boot/dts/rk3288-evb.dtsi26
-rw-r--r--arch/arm/boot/dts/rk3288-fennec.dts10
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-beta.dts4
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi10
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-reload.dts36
-rw-r--r--arch/arm/boot/dts/rk3288-firefly.dts4
-rw-r--r--arch/arm/boot/dts/rk3288-firefly.dtsi38
-rw-r--r--arch/arm/boot/dts/rk3288-miqi.dts28
-rw-r--r--arch/arm/boot/dts/rk3288-phycore-rdk.dts28
-rw-r--r--arch/arm/boot/dts/rk3288-phycore-som.dtsi30
-rw-r--r--arch/arm/boot/dts/rk3288-r89.dts14
-rw-r--r--arch/arm/boot/dts/rk3288-rock2-som.dtsi4
-rw-r--r--arch/arm/boot/dts/rk3288-rock2-square.dts18
-rw-r--r--arch/arm/boot/dts/rk3288-tinker-s.dts5
-rw-r--r--arch/arm/boot/dts/rk3288-tinker.dtsi67
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi8
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-brain.dts8
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi25
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-jaq.dts14
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-jerry.dts23
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-mickey.dts6
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-mighty.dts34
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-minnie.dts24
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-pinky.dts6
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi16
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-speedy.dts14
-rw-r--r--arch/arm/boot/dts/rk3288-veyron.dtsi91
-rw-r--r--arch/arm/boot/dts/rk3288-vyasa.dts6
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi317
-rw-r--r--arch/arm/boot/dts/rv1108-elgin-r1.dts1
-rw-r--r--arch/arm/boot/dts/rv1108.dtsi138
-rw-r--r--arch/arm/boot/dts/s5pv210-goni.dts2
-rw-r--r--arch/arm/boot/dts/s5pv210.dtsi6
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi45
-rw-r--r--arch/arm/boot/dts/sama5d36ek_cmp.dts39
-rw-r--r--arch/arm/boot/dts/sama5d3xcm_cmp.dtsi39
-rw-r--r--arch/arm/boot/dts/sama5d3xmb_cmp.dtsi39
-rw-r--r--arch/arm/boot/dts/sama5d4.dtsi39
-rw-r--r--arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts1
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi74
-rw-r--r--arch/arm/boot/dts/ste-href-stuib.dtsi13
-rw-r--r--arch/arm/boot/dts/ste-href-tvk1281618.dtsi13
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi13
-rw-r--r--arch/arm/boot/dts/stm32f769-disco.dts4
-rw-r--r--arch/arm/boot/dts/stm32h743-pinctrl.dtsi68
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi14
-rw-r--r--arch/arm/boot/dts/stm32h743i-disco.dts20
-rw-r--r--arch/arm/boot/dts/stm32h743i-eval.dts23
-rw-r--r--arch/arm/boot/dts/stm32mp157-pinctrl.dtsi269
-rw-r--r--arch/arm/boot/dts/stm32mp157a-dk1.dts250
-rw-r--r--arch/arm/boot/dts/stm32mp157c-dk2.dts76
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ed1.dts175
-rw-r--r--arch/arm/boot/dts/stm32mp157c.dtsi56
-rw-r--r--arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts20
-rw-r--r--arch/arm/boot/dts/sun4i-a10-cubieboard.dts10
-rw-r--r--arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts20
-rw-r--r--arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts20
-rw-r--r--arch/arm/boot/dts/sun4i-a10-inet1.dts20
-rw-r--r--arch/arm/boot/dts/sun4i-a10-inet97fv2.dts20
-rw-r--r--arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts72
-rw-r--r--arch/arm/boot/dts/sun4i-a10-marsboard.dts12
-rw-r--r--arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts18
-rw-r--r--arch/arm/boot/dts/sun4i-a10-pcduino.dts12
-rw-r--r--arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts20
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi11
-rw-r--r--arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts10
-rw-r--r--arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts10
-rw-r--r--arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts20
-rw-r--r--arch/arm/boot/dts/sun5i-a13-hsg-h702.dts12
-rw-r--r--arch/arm/boot/dts/sun5i-a13-licheepi-one.dts5
-rw-r--r--arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts18
-rw-r--r--arch/arm/boot/dts/sun5i-a13-olinuxino.dts20
-rw-r--r--arch/arm/boot/dts/sun5i-a13-q8-tablet.dts11
-rw-r--r--arch/arm/boot/dts/sun5i-a13-utoo-p66.dts16
-rw-r--r--arch/arm/boot/dts/sun5i-gr8-chip-pro.dts4
-rw-r--r--arch/arm/boot/dts/sun5i-gr8-evb.dts4
-rw-r--r--arch/arm/boot/dts/sun5i-r8-chip.dts14
-rw-r--r--arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi20
-rw-r--r--arch/arm/boot/dts/sun5i.dtsi66
-rw-r--r--arch/arm/boot/dts/sun6i-a31-colombus.dts14
-rw-r--r--arch/arm/boot/dts/sun6i-a31-hummingbird.dts16
-rw-r--r--arch/arm/boot/dts/sun6i-a31-i7.dts1
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi22
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-primo81.dts2
-rw-r--r--arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi12
-rw-r--r--arch/arm/boot/dts/sun7i-a20-bananapi.dts10
-rw-r--r--arch/arm/boot/dts/sun7i-a20-cubieboard2.dts12
-rw-r--r--arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts12
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts4
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts18
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts24
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts18
-rw-r--r--arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts12
-rw-r--r--arch/arm/boot/dts/sun7i-a20-orangepi.dts12
-rw-r--r--arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts12
-rw-r--r--arch/arm/boot/dts/sun7i-a20-pcduino3.dts12
-rw-r--r--arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts12
-rw-r--r--arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts12
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi125
-rw-r--r--arch/arm/boot/dts/sun8i-a23-a33.dtsi74
-rw-r--r--arch/arm/boot/dts/sun8i-a23-q8-tablet.dts6
-rw-r--r--arch/arm/boot/dts/sun8i-a33-q8-tablet.dts7
-rw-r--r--arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts11
-rw-r--r--arch/arm/boot/dts/sun8i-a33.dtsi20
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts12
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts12
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts73
-rw-r--r--arch/arm/boot/dts/sun8i-a83t.dtsi111
-rw-r--r--arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts20
-rw-r--r--arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts2
-rw-r--r--arch/arm/boot/dts/sun8i-h3-beelink-x2.dts6
-rw-r--r--arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts7
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts3
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts2
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts2
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi.dtsi25
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-2.dts34
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts27
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-one.dts25
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts27
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts9
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts3
-rw-r--r--arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts114
-rw-r--r--arch/arm/boot/dts/sun8i-h3.dtsi4
-rw-r--r--arch/arm/boot/dts/sun8i-q8-common.dtsi18
-rw-r--r--arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts2
-rw-r--r--arch/arm/boot/dts/sun8i-r16-parrot.dts12
-rw-r--r--arch/arm/boot/dts/sun8i-r40.dtsi13
-rw-r--r--arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi12
-rw-r--r--arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts2
-rw-r--r--arch/arm/boot/dts/sun8i-v3s.dtsi13
-rw-r--r--arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts36
-rw-r--r--arch/arm/boot/dts/sun9i-a80-cubieboard4.dts15
-rw-r--r--arch/arm/boot/dts/sun9i-a80-optimus.dts4
-rw-r--r--arch/arm/boot/dts/sun9i-a80.dtsi84
-rw-r--r--arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi7
-rw-r--r--arch/arm/boot/dts/sunxi-h3-h5.dtsi50
-rw-r--r--arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi4
-rw-r--r--arch/arm/boot/dts/tegra124-apalis-emc.dtsi39
-rw-r--r--arch/arm/boot/dts/tegra124-apalis-eval.dts40
-rw-r--r--arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts2
-rw-r--r--arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi9
-rw-r--r--arch/arm/boot/dts/tegra124-apalis.dtsi45
-rw-r--r--arch/arm/boot/dts/tegra124-jetson-tk1.dts5
-rw-r--r--arch/arm/boot/dts/tegra124-nyan.dtsi5
-rw-r--r--arch/arm/boot/dts/tegra124-venice2.dts5
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi11
-rw-r--r--arch/arm/boot/dts/vf610-zii-cfu1.dts26
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev-rev-b.dts57
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev-rev-c.dts49
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev.dtsi6
-rw-r--r--arch/arm/boot/dts/vf610-zii-scu4-aib.dts14
-rw-r--r--arch/arm/boot/dts/vf610-zii-spb4.dts359
-rw-r--r--arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts5
-rw-r--r--arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts17
-rw-r--r--arch/arm64/Kconfig.platforms5
-rw-r--r--arch/arm64/boot/dts/Makefile1
-rw-r--r--arch/arm64/boot/dts/allwinner/Makefile3
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts65
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts68
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts13
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi75
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts3
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi1
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts5
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts3
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts260
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts215
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi41
-rw-r--r--arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts3
-rw-r--r--arch/arm64/boot/dts/amlogic/Makefile1
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts185
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts147
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts140
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a.dtsi465
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts10
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts4
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm.dtsi27
-rw-r--r--arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts143
-rw-r--r--arch/arm64/boot/dts/bitmain/bm1880.dtsi68
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi6
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2.dts6
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433.dtsi83
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7.dtsi57
-rw-r--r--arch/arm64/boot/dts/freescale/Makefile3
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts4
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts62
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts63
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi64
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts1
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts16
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts16
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi69
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-evk.dts235
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm.dtsi733
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-evk.dts129
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts95
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts24
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi725
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq.dtsi309
-rw-r--r--arch/arm64/boot/dts/freescale/imx8qxp-mek.dts95
-rw-r--r--arch/arm64/boot/dts/freescale/imx8qxp.dtsi89
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3660.dtsi20
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts75
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3670.dtsi62
-rw-r--r--arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi115
-rw-r--r--arch/arm64/boot/dts/intel/Makefile1
-rw-r--r--arch/arm64/boot/dts/intel/socfpga_agilex.dtsi444
-rw-r--r--arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts75
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts13
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8173.dtsi35
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h1120
-rw-r--r--arch/arm64/boot/dts/nvidia/Makefile1
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts115
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi42
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186.dtsi140
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi1
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts2
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi6
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts12
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi5
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi6
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts650
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-smaug.dts12
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210.dtsi41
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi52
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi8
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi121
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi46
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996-pins.dtsi43
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi558
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi60
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998.dtsi315
-rw-r--r--arch/arm64/boot/dts/qcom/pm8005.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/pm8998.dtsi3
-rw-r--r--arch/arm64/boot/dts/qcom/pmi8994.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/pmi8998.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/pms405.dtsi11
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts3
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts85
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404-evb.dtsi95
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404.dtsi23
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-mtp.dts8
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845.dtsi427
-rw-r--r--arch/arm64/boot/dts/renesas/cat875.dtsi22
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774a1.dtsi12
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts62
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0.dtsi44
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795.dtsi72
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts1
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts1
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796.dtsi13
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965.dtsi324
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77980.dtsi16
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts53
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990.dtsi74
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995-draak.dts32
-rw-r--r--arch/arm64/boot/dts/renesas/salvator-common.dtsi73
-rw-r--r--arch/arm64/boot/dts/rockchip/Makefile2
-rw-r--r--arch/arm64/boot/dts/rockchip/px30-evb.dts4
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-evb.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts53
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-rock64.dts33
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328.dtsi7
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi34
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts8
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts14
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi10
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts46
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts6
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-r88.dts36
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368.dtsi240
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-evb.dts6
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-ficus.dts18
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi14
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts8
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi68
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi56
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts69
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts50
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi27
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts790
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts12
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi21
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts5
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi77
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts6
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi4
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399.dtsi314
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts1
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts1
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts1
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts1
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts1
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts1
-rw-r--r--include/dt-bindings/clock/xlnx-zynqmp-clk.h (renamed from include/dt-bindings/clock/xlnx,zynqmp-clk.h)26
-rw-r--r--include/dt-bindings/firmware/imx/rsrc.h25
-rw-r--r--include/dt-bindings/pinctrl/am33xx.h130
-rw-r--r--include/dt-bindings/pinctrl/omap.h1
-rw-r--r--include/dt-bindings/power/r8a77965-sysc.h1
513 files changed, 23982 insertions, 6172 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 7f40cb5f490b..061f7b98a07f 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -110,6 +110,7 @@ Board compatible values (alphabetically, grouped by SoC):
- "amlogic,u200" (Meson g12a s905d2)
- "amediatech,x96-max" (Meson g12a s905x2)
+ - "seirobotics,sei510" (Meson g12a s905x2)
Amlogic Meson Firmware registers Interface
------------------------------------------
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 72d481c8dd48..5d7dbabbb784 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -22,9 +22,11 @@ Required properties:
-------------------
- compatible: should be "fsl,imx-scu".
- mbox-names: should include "tx0", "tx1", "tx2", "tx3",
- "rx0", "rx1", "rx2", "rx3".
-- mboxes: List of phandle of 4 MU channels for tx and 4 MU channels
- for rx. All 8 MU channels must be in the same MU instance.
+ "rx0", "rx1", "rx2", "rx3";
+ include "gip3" if want to support general MU interrupt.
+- mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for
+ rx, and 1 optional MU channel for general interrupt.
+ All MU channels must be in the same MU instance.
Cross instances are not allowed. The MU instance can only
be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
to make sure use the one which is not conflict with other
@@ -34,6 +36,7 @@ Required properties:
Channel 1 must be "tx1" or "rx1".
Channel 2 must be "tx2" or "rx2".
Channel 3 must be "tx3" or "rx3".
+ General interrupt rx channel must be "gip3".
e.g.
mboxes = <&lsio_mu1 0 0
&lsio_mu1 0 1
@@ -42,10 +45,18 @@ Required properties:
&lsio_mu1 1 0
&lsio_mu1 1 1
&lsio_mu1 1 2
- &lsio_mu1 1 3>;
+ &lsio_mu1 1 3
+ &lsio_mu1 3 3>;
See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
for detailed mailbox binding.
+Note: Each mu which supports general interrupt should have an alias correctly
+numbered in "aliases" node.
+e.g.
+aliases {
+ mu1 = &lsio_mu1;
+};
+
i.MX SCU Client Device Node:
============================================================
@@ -124,6 +135,10 @@ Required properties:
Example (imx8qxp):
-------------
+aliases {
+ mu1 = &lsio_mu1;
+};
+
lsio_mu1: mailbox@5d1c0000 {
...
#mbox-cells = <2>;
@@ -133,7 +148,8 @@ firmware {
scu {
compatible = "fsl,imx-scu";
mbox-names = "tx0", "tx1", "tx2", "tx3",
- "rx0", "rx1", "rx2", "rx3";
+ "rx0", "rx1", "rx2", "rx3",
+ "gip3";
mboxes = <&lsio_mu1 0 0
&lsio_mu1 0 1
&lsio_mu1 0 2
@@ -141,7 +157,8 @@ firmware {
&lsio_mu1 1 0
&lsio_mu1 1 1
&lsio_mu1 1 2
- &lsio_mu1 1 3>;
+ &lsio_mu1 1 3
+ &lsio_mu1 3 3>;
clk: clk {
compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 7e2cd6ad26bd..407138ebc0d0 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -51,6 +51,13 @@ properties:
- const: i2se,duckbill-2
- const: fsl,imx28
+ - description: i.MX50 based Boards
+ items:
+ - enum:
+ - fsl,imx50-evk
+ - kobo,aura
+ - const: fsl,imx50
+
- description: i.MX51 Babbage Board
items:
- enum:
@@ -67,6 +74,7 @@ properties:
- fsl,imx53-evk
- fsl,imx53-qsb
- fsl,imx53-smd
+ - menlo,m53menlo
- const: fsl,imx53
- description: i.MX6Q based Boards
@@ -90,6 +98,7 @@ properties:
- description: i.MX6DL based Boards
items:
- enum:
+ - eckelmann,imx6dl-ci4x10
- fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board
- fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board
- technologic,imx6dl-ts4900
@@ -137,10 +146,18 @@ properties:
- const: fsl,imx6ull # This seems odd. Should be last?
- const: fsl,imx6ulz
+ - description: i.MX7S based Boards
+ items:
+ - enum:
+ - tq,imx7s-mba7 # i.MX7S TQ MBa7 with TQMa7S SoM
+ - const: fsl,imx7s
+
- description: i.MX7D based Boards
items:
- enum:
- fsl,imx7d-sdb # i.MX7 SabreSD Board
+ - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM
+ - zii,imx7d-rpu2 # ZII RPU2 Board
- const: fsl,imx7d
- description:
@@ -154,6 +171,12 @@ properties:
- const: compulab,cl-som-imx7
- const: fsl,imx7d
+ - description: i.MX8MM based Boards
+ items:
+ - enum:
+ - fsl,imx8mm-evk # i.MX8MM EVK Board
+ - const: fsl,imx8mm
+
- description: i.MX8QXP based Boards
items:
- enum:
@@ -176,6 +199,19 @@ properties:
- fsl,vf610
- fsl,vf610m4
+ - description: ZII's VF610 based Boards
+ items:
+ - enum:
+ - zii,vf610cfu1 # ZII VF610 CFU1 Board
+ - zii,vf610dev-c # ZII VF610 Development Board, Rev C
+ - zii,vf610dev-b # ZII VF610 Development Board, Rev B
+ - zii,vf610scu4-aib # ZII VF610 SCU4 AIB
+ - zii,vf610dtu # ZII VF610 SSMB DTU Board
+ - zii,vf610spu3 # ZII VF610 SSMB SPU3 Board
+ - zii,vf610spb4 # ZII VF610 SPB4 Board
+ - const: zii,vf610dev
+ - const: fsl,vf610
+
- description: LS1012A based Boards
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 2ecc712bf707..1c1e48fd94b5 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -92,6 +92,9 @@ SoCs:
- DRA718
compatible = "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"
+- AM5748
+ compatible = "ti,am5748", "ti,dra762", "ti,dra7"
+
- AM5728
compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
@@ -184,6 +187,9 @@ Boards:
- AM57XX SBC-AM57x
compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+- AM5748 IDK
+ compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7";
+
- AM5728 IDK
compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 061a03edf9c8..5c6bbf10abc9 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -97,6 +97,7 @@ properties:
- enum:
- friendlyarm,nanopc-t4
- friendlyarm,nanopi-m4
+ - friendlyarm,nanopi-neo4
- const: rockchip,rk3399
- description: GeekBuying GeekBox
@@ -146,7 +147,7 @@ properties:
- const: google,gru
- const: rockchip,rk3399
- - description: Google Jaq (Haier Chromebook 11 and more)
+ - description: Google Jaq (Haier Chromebook 11 and more w/ uSD)
items:
- const: google,veyron-jaq-rev5
- const: google,veyron-jaq-rev4
@@ -159,6 +160,12 @@ properties:
- description: Google Jerry (Hisense Chromebook C11 and more)
items:
+ - const: google,veyron-jerry-rev15
+ - const: google,veyron-jerry-rev14
+ - const: google,veyron-jerry-rev13
+ - const: google,veyron-jerry-rev12
+ - const: google,veyron-jerry-rev11
+ - const: google,veyron-jerry-rev10
- const: google,veyron-jerry-rev7
- const: google,veyron-jerry-rev6
- const: google,veyron-jerry-rev5
@@ -199,6 +206,17 @@ properties:
- const: google,veyron
- const: rockchip,rk3288
+ - description: Google Mighty (Haier Chromebook 11 and more w/ SD)
+ items:
+ - const: google,veyron-mighty-rev5
+ - const: google,veyron-mighty-rev4
+ - const: google,veyron-mighty-rev3
+ - const: google,veyron-mighty-rev2
+ - const: google,veyron-mighty-rev1
+ - const: google,veyron-mighty
+ - const: google,veyron
+ - const: rockchip,rk3288
+
- description: Google Minnie (Asus Chromebook Flip C100P)
items:
- const: google,veyron-minnie-rev4
@@ -308,6 +326,11 @@ properties:
- const: netxeon,r89
- const: rockchip,rk3288
+ - description: Orange Pi RK3399 board
+ items:
+ - const: rockchip,rk3399-orangepi
+ - const: rockchip,rk3399
+
- description: Phytec phyCORE-RK3288 Rapid Development Kit
items:
- const: phytec,rk3288-pcm-947
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
deleted file mode 100644
index 9254cbe7d516..000000000000
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Allwinner sunXi Platforms Device Tree Bindings
-
-Each device tree must specify which Allwinner SoC it uses,
-using one of the following compatible strings:
-
- allwinner,sun4i-a10
- allwinner,sun5i-a10s
- allwinner,sun5i-a13
- allwinner,sun5i-r8
- allwinner,sun6i-a31
- allwinner,sun7i-a20
- allwinner,sun8i-a23
- allwinner,sun8i-a33
- allwinner,sun8i-a83t
- allwinner,sun8i-h2-plus
- allwinner,sun8i-h3
- allwinner,sun8i-r40
- allwinner,sun8i-t3
- allwinner,sun8i-v3s
- allwinner,sun9i-a80
- allwinner,sun50i-a64
- allwinner,suniv-f1c100s
- nextthing,gr8
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
new file mode 100644
index 000000000000..285f4fc8519d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -0,0 +1,807 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner platforms device tree bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+
+ - description: Allwinner A23 Evaluation Board
+ items:
+ - const: allwinner,sun8i-a23-evb
+ - const: allwinner,sun8i-a23
+
+ - description: Allwinner A31 APP4 Evaluation Board
+ items:
+ - const: allwinner,app4-evb1
+ - const: allwinner,sun6i-a31
+
+ - description: Allwinner A83t Homlet Evaluation Board v2
+ items:
+ - const: allwinner,h8homlet-v2
+ - const: allwinner,sun8i-a83t
+
+ - description: Allwinner GA10H Quad Core Tablet v1.1
+ items:
+ - const: allwinner,ga10h-v1.1
+ - const: allwinner,sun8i-a33
+
+ - description: Allwinner GT90H Tablet v4
+ items:
+ - const: allwinner,gt90h-v4
+ - const: allwinner,sun8i-a23
+
+ - description: Allwinner R16 EVB (Parrot)
+ items:
+ - const: allwinner,parrot
+ - const: allwinner,sun8i-a33
+
+ - description: Amarula A64 Relic
+ items:
+ - const: amarula,a64-relic
+ - const: allwinner,sun50i-a64
+
+ - description: Auxtek T003 A10s HDMI TV Stick
+ items:
+ - const: allwinner,auxtek-t003
+ - const: allwinner,sun5i-a10s
+
+ - description: Auxtek T004 A10s HDMI TV Stick
+ items:
+ - const: allwinner,auxtek-t004
+ - const: allwinner,sun5i-a10s
+
+ - description: BA10 TV Box
+ items:
+ - const: allwinner,ba10-tvbox
+ - const: allwinner,sun4i-a10
+
+ - description: BananaPi
+ items:
+ - const: lemaker,bananapi
+ - const: allwinner,sun7i-a20
+
+ - description: BananaPi M1 Plus
+ items:
+ - const: sinovoip,bpi-m1-plus
+ - const: allwinner,sun7i-a20
+
+ - description: BananaPi M2
+ items:
+ - const: sinovoip,bpi-m2
+ - const: allwinner,sun6i-a31s
+
+ - description: BananaPi M2 Berry
+ items:
+ - const: sinovoip,bpi-m2-berry
+ - const: allwinner,sun8i-r40
+
+ - description: BananaPi M2 Plus
+ items:
+ - const: sinovoip,bpi-m2-plus
+ - const: allwinner,sun8i-h3
+
+ - description: BananaPi M2 Plus
+ items:
+ - const: sinovoip,bpi-m2-plus
+ - const: allwinner,sun50i-h5
+
+ - description: BananaPi M2 Plus v1.2
+ items:
+ - const: bananapi,bpi-m2-plus-v1.2
+ - const: allwinner,sun8i-h3
+
+ - description: BananaPi M2 Plus v1.2
+ items:
+ - const: bananapi,bpi-m2-plus-v1.2
+ - const: allwinner,sun50i-h5
+
+ - description: BananaPi M2 Magic
+ items:
+ - const: sinovoip,bananapi-m2m
+ - const: allwinner,sun8i-a33
+
+ - description: BananaPi M2 Ultra
+ items:
+ - const: sinovoip,bpi-m2-ultra
+ - const: allwinner,sun8i-r40
+
+ - description: BananaPi M2 Zero
+ items:
+ - const: sinovoip,bpi-m2-zero
+ - const: allwinner,sun8i-h2-plus
+
+ - description: BananaPi M3
+ items:
+ - const: sinovoip,bpi-m3
+ - const: allwinner,sun8i-a83t
+
+ - description: BananaPi M64
+ items:
+ - const: sinovoip,bananapi-m64
+ - const: allwinner,sun50i-a64
+
+ - description: BananaPro
+ items:
+ - const: lemaker,bananapro
+ - const: allwinner,sun7i-a20
+
+ - description: Beelink GS1
+ items:
+ - const: azw,beelink-gs1
+ - const: allwinner,sun50i-h6
+
+ - description: Beelink X2
+ items:
+ - const: roofull,beelink-x2
+ - const: allwinner,sun8i-h3
+
+ - description: Chuwi V7 CW0825
+ items:
+ - const: chuwi,v7-cw0825
+ - const: allwinner,sun4i-a10
+
+ - description: Colorfly E708 Q1 Tablet
+ items:
+ - const: colorfly,e708-q1
+ - const: allwinner,sun6i-a31s
+
+ - description: CSQ CS908 Set Top Box
+ items:
+ - const: csq,cs908
+ - const: allwinner,sun6i-a31s
+
+ - description: Cubietech Cubieboard
+ items:
+ - const: cubietech,a10-cubieboard
+ - const: allwinner,sun4i-a10
+
+ - description: Cubietech Cubieboard2
+ items:
+ - const: cubietech,cubieboard2
+ - const: allwinner,sun7i-a20
+
+ - description: Cubietech Cubieboard4
+ items:
+ - const: cubietech,a80-cubieboard4
+ - const: allwinner,sun9i-a80
+
+ - description: Cubietech Cubietruck
+ items:
+ - const: cubietech,cubietruck
+ - const: allwinner,sun7i-a20
+
+ - description: Cubietech Cubietruck Plus
+ items:
+ - const: cubietech,cubietruck-plus
+ - const: allwinner,sun8i-a83t
+
+ - description: Difrnce DIT4350
+ items:
+ - const: difrnce,dit4350
+ - const: allwinner,sun5i-a13
+
+ - description: Dserve DSRV9703C
+ items:
+ - const: dserve,dsrv9703c
+ - const: allwinner,sun4i-a10
+
+ - description: Empire Electronix D709 Tablet
+ items:
+ - const: empire-electronix,d709
+ - const: allwinner,sun5i-a13
+
+ - description: Empire Electronix M712 Tablet
+ items:
+ - const: empire-electronix,m712
+ - const: allwinner,sun5i-a13
+
+ - description: FriendlyARM NanoPi A64
+ items:
+ - const: friendlyarm,nanopi-a64
+ - const: allwinner,sun50i-a64
+
+ - description: FriendlyARM NanoPi M1
+ items:
+ - const: friendlyarm,nanopi-m1
+ - const: allwinner,sun8i-h3
+
+ - description: FriendlyARM NanoPi M1 Plus
+ items:
+ - const: friendlyarm,nanopi-m1-plus
+ - const: allwinner,sun8i-h3
+
+ - description: FriendlyARM NanoPi Neo
+ items:
+ - const: friendlyarm,nanopi-neo
+ - const: allwinner,sun8i-h3
+
+ - description: FriendlyARM NanoPi Neo 2
+ items:
+ - const: friendlyarm,nanopi-neo2
+ - const: allwinner,sun50i-h5
+
+ - description: FriendlyARM NanoPi Neo Air
+ items:
+ - const: friendlyarm,nanopi-neo-air
+ - const: allwinner,sun8i-h3
+
+ - description: FriendlyARM NanoPi Neo Plus2
+ items:
+ - const: friendlyarm,nanopi-neo-plus2
+ - const: allwinner,sun50i-h5
+
+ - description: Gemei G9 Tablet
+ items:
+ - const: gemei,g9
+ - const: allwinner,sun4i-a10
+
+ - description: Hyundai A7HD
+ items:
+ - const: hyundai,a7hd
+ - const: allwinner,sun4i-a10
+
+ - description: HSG H702
+ items:
+ - const: hsg,h702
+ - const: allwinner,sun5i-a13
+
+ - description: I12 TV Box
+ items:
+ - const: allwinner,i12-tvbox
+ - const: allwinner,sun7i-a20
+
+ - description: ICNova A20 SWAC
+ items:
+ - const: swac,icnova-a20-swac
+ - const: incircuit,icnova-a20
+ - const: allwinner,sun7i-a20
+
+ - description: INet-1
+ items:
+ - const: inet-tek,inet1
+ - const: allwinner,sun4i-a10
+
+ - description: iNet-86DZ Rev 01
+ items:
+ - const: primux,inet86dz
+ - const: allwinner,sun8i-a23
+
+ - description: iNet-9F Rev 03
+ items:
+ - const: inet-tek,inet9f-rev03
+ - const: allwinner,sun4i-a10
+
+ - description: iNet-97F Rev 02
+ items:
+ - const: primux,inet97fv2
+ - const: allwinner,sun4i-a10
+
+ - description: iNet-98V Rev 02
+ items:
+ - const: primux,inet98v-rev2
+ - const: allwinner,sun5i-a13
+
+ - description: iNet D978 Rev 02 Tablet
+ items:
+ - const: primux,inet-d978-rev2
+ - const: allwinner,sun8i-a33
+
+ - description: iNet Q972 Tablet
+ items:
+ - const: inet-tek,inet-q972
+ - const: allwinner,sun6i-a31s
+
+ - description: Itead Ibox A20
+ items:
+ - const: itead,itead-ibox-a20
+ - const: allwinner,sun7i-a20
+
+ - description: Itead Iteaduino Plus A10
+ items:
+ - const: itead,iteaduino-plus-a10
+ - const: allwinner,sun4i-a10
+
+ - description: Jesurun Q5
+ items:
+ - const: jesurun,q5
+ - const: allwinner,sun4i-a10
+
+ - description: Lamobo R1
+ items:
+ - const: lamobo,lamobo-r1
+ - const: allwinner,sun7i-a20
+
+ - description: Libre Computer Board ALL-H3-CC H2+
+ items:
+ - const: libretech,all-h3-cc-h2-plus
+ - const: allwinner,sun8i-h2-plus
+
+ - description: Libre Computer Board ALL-H3-CC H3
+ items:
+ - const: libretech,all-h3-cc-h3
+ - const: allwinner,sun8i-h3
+
+ - description: Libre Computer Board ALL-H3-CC H5
+ items:
+ - const: libretech,all-h3-cc-h5
+ - const: allwinner,sun50i-h5
+
+ - description: Lichee Pi One
+ items:
+ - const: licheepi,licheepi-one
+ - const: allwinner,sun5i-a13
+
+ - description: Lichee Pi Zero
+ items:
+ - const: licheepi,licheepi-zero
+ - const: allwinner,sun8i-v3s
+
+ - description: Lichee Pi Zero (with Dock)
+ items:
+ - const: licheepi,licheepi-zero-dock
+ - const: licheepi,licheepi-zero
+ - const: allwinner,sun8i-v3s
+
+ - description: Linksprite PCDuino
+ items:
+ - const: linksprite,a10-pcduino
+ - const: allwinner,sun4i-a10
+
+ - description: Linksprite PCDuino2
+ items:
+ - const: linksprite,a10-pcduino2
+ - const: allwinner,sun4i-a10
+
+ - description: Linksprite PCDuino3
+ items:
+ - const: linksprite,pcduino3
+ - const: allwinner,sun7i-a20
+
+ - description: Linksprite PCDuino3 Nano
+ items:
+ - const: linksprite,pcduino3-nano
+ - const: allwinner,sun7i-a20
+
+ - description: HAOYU Electronics Marsboard A10
+ items:
+ - const: haoyu,a10-marsboard
+ - const: allwinner,sun4i-a10
+
+ - description: MapleBoard MP130
+ items:
+ - const: mapleboard,mp130
+ - const: allwinner,sun8i-h3
+
+ - description: Mele A1000
+ items:
+ - const: mele,a1000
+ - const: allwinner,sun4i-a10
+
+ - description: Mele A1000G Quad Set Top Box
+ items:
+ - const: mele,a1000g-quad
+ - const: allwinner,sun6i-a31
+
+ - description: Mele I7 Quad Set Top Box
+ items:
+ - const: mele,i7
+ - const: allwinner,sun6i-a31
+
+ - description: Mele M3
+ items:
+ - const: mele,m3
+ - const: allwinner,sun7i-a20
+
+ - description: Mele M9 Set Top Box
+ items:
+ - const: mele,m9
+ - const: allwinner,sun6i-a31
+
+ - description: Merrii A20 Hummingboard
+ items:
+ - const: merrii,a20-hummingbird
+ - const: allwinner,sun7i-a20
+
+ - description: Merrii A31 Hummingboard
+ items:
+ - const: merrii,a31-hummingbird
+ - const: allwinner,sun6i-a31
+
+ - description: Merrii A80 Optimus
+ items:
+ - const: merrii,a80-optimus
+ - const: allwinner,sun9i-a80
+
+ - description: Miniand Hackberry
+ items:
+ - const: miniand,hackberry
+ - const: allwinner,sun4i-a10
+
+ - description: MK802
+ items:
+ - const: allwinner,mk802
+ - const: allwinner,sun4i-a10
+
+ - description: MK802-A10s
+ items:
+ - const: allwinner,a10s-mk802
+ - const: allwinner,sun5i-a10s
+
+ - description: MK802-II
+ items:
+ - const: allwinner,mk802ii
+ - const: allwinner,sun4i-a10
+
+ - description: MK808c
+ items:
+ - const: allwinner,mk808c
+ - const: allwinner,sun7i-a20
+
+ - description: MSI Primo81 Tablet
+ items:
+ - const: msi,primo81
+ - const: allwinner,sun6i-a31s
+
+ - description: Emlid Neutis N5 Developper Board
+ items:
+ - const: emlid,neutis-n5-devboard
+ - const: emlid,neutis-n5
+ - const: allwinner,sun50i-h5
+
+ - description: NextThing Co. CHIP
+ items:
+ - const: nextthing,chip
+ - const: allwinner,sun5i-r8
+ - const: allwinner,sun5i-a13
+
+ - description: NextThing Co. CHIP Pro
+ items:
+ - const: nextthing,chip-pro
+ - const: nextthing,gr8
+
+ - description: NextThing Co. GR8 Evaluation Board
+ items:
+ - const: nextthing,gr8-evb
+ - const: nextthing,gr8
+
+ - description: Nintendo NES Classic
+ items:
+ - const: nintendo,nes-classic
+ - const: allwinner,sun8i-r16
+ - const: allwinner,sun8i-a33
+
+ - description: Nintendo Super NES Classic
+ items:
+ - const: nintendo,super-nes-classic
+ - const: nintendo,nes-classic
+ - const: allwinner,sun8i-r16
+ - const: allwinner,sun8i-a33
+
+ - description: Oceanic 5inMFD (5205)
+ items:
+ - const: oceanic,5205-5inmfd
+ - const: allwinner,sun50i-a64
+
+ - description: Olimex A10-OlinuXino LIME
+ items:
+ - const: olimex,a10-olinuxino-lime
+ - const: allwinner,sun4i-a10
+
+ - description: Olimex A10s-OlinuXino Micro
+ items:
+ - const: olimex,a10s-olinuxino-micro
+ - const: allwinner,sun5i-a10s
+
+ - description: Olimex A13-OlinuXino
+ items:
+ - const: olimex,a13-olinuxino
+ - const: allwinner,sun5i-a13
+
+ - description: Olimex A13-OlinuXino Micro
+ items:
+ - const: olimex,a13-olinuxino-micro
+ - const: allwinner,sun5i-a13
+
+ - description: Olimex A20-Olimex SOM Evaluation Board
+ items:
+ - const: olimex,a20-olimex-som-evb
+ - const: allwinner,sun7i-a20
+
+ - description: Olimex A20-Olimex SOM Evaluation Board (with eMMC)
+ items:
+ - const: olimex,a20-olimex-som-evb-emmc
+ - const: allwinner,sun7i-a20
+
+ - description: Olimex A20-OlinuXino LIME
+ items:
+ - const: olimex,a20-olinuxino-lime
+ - const: allwinner,sun7i-a20
+
+ - description: Olimex A20-OlinuXino LIME2
+ items:
+ - const: olimex,a20-olinuxino-lime2
+ - const: allwinner,sun7i-a20
+
+ - description: Olimex A20-OlinuXino LIME2 (with eMMC)
+ items:
+ - const: olimex,a20-olinuxino-lime2-emmc
+ - const: allwinner,sun7i-a20
+
+ - description: Olimex A20-OlinuXino Micro
+ items:
+ - const: olimex,a20-olinuxino-micro
+ - const: allwinner,sun7i-a20
+
+ - description: Olimex A20-OlinuXino Micro (with eMMC)
+ items:
+ - const: olimex,a20-olinuxino-micro-emmc
+ - const: allwinner,sun7i-a20
+
+ - description: Olimex A20-SOM204 Evaluation Board
+ items:
+ - const: olimex,a20-olimex-som204-evb
+ - const: allwinner,sun7i-a20
+
+ - description: Olimex A20-SOM204 Evaluation Board (with eMMC)
+ items:
+ - const: olimex,a20-olimex-som204-evb-emmc
+ - const: allwinner,sun7i-a20
+
+ - description: Olimex A33-OlinuXino
+ items:
+ - const: olimex,a33-olinuxino
+ - const: allwinner,sun8i-a33
+
+ - description: Olimex A64-OlinuXino
+ items:
+ - const: olimex,a64-olinuxino
+ - const: allwinner,sun50i-a64
+
+ - description: Olimex A64 Teres-I
+ items:
+ - const: olimex,a64-teres-i
+ - const: allwinner,sun50i-a64
+
+ - description: Pine64
+ items:
+ - const: pine64,pine64
+ - const: allwinner,sun50i-a64
+
+ - description: Pine64+
+ items:
+ - const: pine64,pine64-plus
+ - const: allwinner,sun50i-a64
+
+ - description: Pine64 PineH64
+ items:
+ - const: pine64,pine-h64
+ - const: allwinner,sun50i-h6
+
+ - description: Pine64 LTS
+ items:
+ - const: pine64,pine64-lts
+ - const: allwinner,sun50i-r18
+ - const: allwinner,sun50i-a64
+
+ - description: Pine64 Pinebook
+ items:
+ - const: pine64,pinebook
+ - const: allwinner,sun50i-a64
+
+ - description: Pine64 SoPine Baseboard
+ items:
+ - const: pine64,sopine-baseboard
+ - const: pine64,sopine
+ - const: allwinner,sun50i-a64
+
+ - description: PineRiver Mini X-Plus
+ items:
+ - const: pineriver,mini-xplus
+ - const: allwinner,sun4i-a10
+
+ - description: Point of View Protab2-IPS9
+ items:
+ - const: pov,protab2-ips9
+ - const: allwinner,sun4i-a10
+
+ - description: Polaroid MID2407PXE03 Tablet
+ items:
+ - const: polaroid,mid2407pxe03
+ - const: allwinner,sun8i-a23
+
+ - description: Polaroid MID2809PXE04 Tablet
+ items:
+ - const: polaroid,mid2809pxe04
+ - const: allwinner,sun8i-a23
+
+ - description: Q8 A13 Tablet
+ items:
+ - const: allwinner,q8-a13
+ - const: allwinner,sun5i-a13
+
+ - description: Q8 A23 Tablet
+ items:
+ - const: allwinner,q8-a23
+ - const: allwinner,sun8i-a23
+
+ - description: Q8 A33 Tablet
+ items:
+ - const: allwinner,q8-a33
+ - const: allwinner,sun8i-a33
+
+ - description: Qihua CQA3T BV3
+ items:
+ - const: qihua,t3-cqa3t-bv3
+ - const: allwinner,sun8i-t3
+ - const: allwinner,sun8i-r40
+
+ - description: R7 A10s HDMI TV Stick
+ items:
+ - const: allwinner,r7-tv-dongle
+ - const: allwinner,sun5i-a10s
+
+ - description: RerVision H3-DVK
+ items:
+ - const: rervision,h3-dvk
+ - const: allwinner,sun8i-h3
+
+ - description: Sinlinx SinA31s Core Board
+ items:
+ - const: sinlinx,sina31s
+ - const: allwinner,sun6i-a31s
+
+ - description: Sinlinx SinA31s Development Board
+ items:
+ - const: sinlinx,sina31s-sdk
+ - const: allwinner,sun6i-a31s
+
+ - description: Sinlinx SinA33
+ items:
+ - const: sinlinx,sina33
+ - const: allwinner,sun8i-a33
+
+ - description: TBS A711 Tablet
+ items:
+ - const: tbs-biometrics,a711
+ - const: allwinner,sun8i-a83t
+
+ - description: Utoo P66
+ items:
+ - const: utoo,p66
+ - const: allwinner,sun5i-a13
+
+ - description: Wexler TAB7200
+ items:
+ - const: wexler,tab7200
+ - const: allwinner,sun7i-a20
+
+ - description: WITS A31 Colombus Evaluation Board
+ items:
+ - const: wits,colombus
+ - const: allwinner,sun6i-a31
+
+ - description: WITS Pro A20 DKT
+ items:
+ - const: wits,pro-a20-dkt
+ - const: allwinner,sun7i-a20
+
+ - description: Wobo i5
+ items:
+ - const: wobo,a10s-wobo-i5
+ - const: allwinner,sun5i-a10s
+
+ - description: Yones TopTech BS1078 v2 Tablet
+ items:
+ - const: yones-toptech,bs1078-v2
+ - const: allwinner,sun6i-a31s
+
+ - description: Xunlong OrangePi
+ items:
+ - const: xunlong,orangepi
+ - const: allwinner,sun7i-a20
+
+ - description: Xunlong OrangePi 2
+ items:
+ - const: xunlong,orangepi-2
+ - const: allwinner,sun8i-h3
+
+ - description: Xunlong OrangePi 3
+ items:
+ - const: xunlong,orangepi-3
+ - const: allwinner,sun50i-h6
+
+ - description: Xunlong OrangePi Lite
+ items:
+ - const: xunlong,orangepi-lite
+ - const: allwinner,sun8i-h3
+
+ - description: Xunlong OrangePi Lite2
+ items:
+ - const: xunlong,orangepi-lite2
+ - const: allwinner,sun50i-h6
+
+ - description: Xunlong OrangePi Mini
+ items:
+ - const: xunlong,orangepi-mini
+ - const: allwinner,sun7i-a20
+
+ - description: Xunlong OrangePi One
+ items:
+ - const: xunlong,orangepi-one
+ - const: allwinner,sun8i-h3
+
+ - description: Xunlong OrangePi One Plus
+ items:
+ - const: xunlong,orangepi-one-plus
+ - const: allwinner,sun50i-h6
+
+ - description: Xunlong OrangePi PC
+ items:
+ - const: xunlong,orangepi-pc
+ - const: allwinner,sun8i-h3
+
+ - description: Xunlong OrangePi PC 2
+ items:
+ - const: xunlong,orangepi-pc2
+ - const: allwinner,sun50i-h5
+
+ - description: Xunlong OrangePi PC Plus
+ items:
+ - const: xunlong,orangepi-pc-plus
+ - const: allwinner,sun8i-h3
+
+ - description: Xunlong OrangePi Plus
+ items:
+ - const: xunlong,orangepi-plus
+ - const: allwinner,sun8i-h3
+
+ - description: Xunlong OrangePi Plus 2E
+ items:
+ - const: xunlong,orangepi-plus2e
+ - const: allwinner,sun8i-h3
+
+ - description: Xunlong OrangePi Prime
+ items:
+ - const: xunlong,orangepi-prime
+ - const: allwinner,sun50i-h5
+
+ - description: Xunlong OrangePi R1
+ items:
+ - const: xunlong,orangepi-r1
+ - const: allwinner,sun8i-h2-plus
+
+ - description: Xunlong OrangePi Win
+ items:
+ - const: xunlong,orangepi-win
+ - const: allwinner,sun50i-a64
+
+ - description: Xunlong OrangePi Zero
+ items:
+ - const: xunlong,orangepi-zero
+ - const: allwinner,sun8i-h2-plus
+
+ - description: Xunlong OrangePi Zero Plus
+ items:
+ - const: xunlong,orangepi-zero-plus
+ - const: allwinner,sun50i-h5
+
+ - description: Xunlong OrangePi Zero Plus2
+ items:
+ - const: xunlong,orangepi-zero-plus2
+ - const: allwinner,sun50i-h5
+
+ - description: Xunlong OrangePi Zero Plus2
+ items:
+ - const: xunlong,orangepi-zero-plus2-h3
+ - const: allwinner,sun8i-h3
diff --git a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
new file mode 100644
index 000000000000..391ee1a60bed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
@@ -0,0 +1,63 @@
+--------------------------------------------------------------------------
+Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
+Zynq MPSoC firmware interface
+--------------------------------------------------------------------------
+The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
+tree. It reads required input clock frequencies from the devicetree and acts
+as clock provider for all clock consumers of PS clocks.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+
+Required properties:
+ - #clock-cells: Must be 1
+ - compatible: Must contain: "xlnx,zynqmp-clk"
+ - clocks: List of clock specifiers which are external input
+ clocks to the given clock controller. Please refer
+ the next section to find the input clocks for a
+ given controller.
+ - clock-names: List of clock names which are exteral input clocks
+ to the given clock controller. Please refer to the
+ clock bindings for more details.
+
+Input clocks for zynqmp Ultrascale+ clock controller:
+
+The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
+inputs. These required clock inputs are:
+ - pss_ref_clk (PS reference clock)
+ - video_clk (reference clock for video system )
+ - pss_alt_ref_clk (alternative PS reference clock)
+ - aux_ref_clk
+ - gt_crx_ref_clk (transceiver reference clock)
+
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source:
+ - swdt0_ext_clk
+ - swdt1_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - gem2_emio_clk
+ - gem3_emio_clk
+ - mio_clk_XX # with XX = 00..77
+ - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
+
+
+Output clocks are registered based on clock information received
+from firmware. Output clocks indexes are mentioned in
+include/dt-bindings/clock/xlnx-zynqmp-clk.h.
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ zynqmp_clk: clock-controller {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
+ clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 3c9a57a8443b..9d8bbac27d8b 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,7 @@ Required properties:
"fsl,imx53-sdma"
"fsl,imx6q-sdma"
"fsl,imx7d-sdma"
+ "fsl,imx8mq-sdma"
The -to variants should be preferred since they allow to determine the
correct ROM script addresses needed for the driver to work without additional
firmware.
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
index 614bac55df86..a4fe136be2ba 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -17,53 +17,6 @@ Required properties:
- "smc" : SMC #0, following the SMCCC
- "hvc" : HVC #0, following the SMCCC
---------------------------------------------------------------------------
-Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
-Zynq MPSoC firmware interface
---------------------------------------------------------------------------
-The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
-tree. It reads required input clock frequencies from the devicetree and acts
-as clock provider for all clock consumers of PS clocks.
-
-See clock_bindings.txt for more information on the generic clock bindings.
-
-Required properties:
- - #clock-cells: Must be 1
- - compatible: Must contain: "xlnx,zynqmp-clk"
- - clocks: List of clock specifiers which are external input
- clocks to the given clock controller. Please refer
- the next section to find the input clocks for a
- given controller.
- - clock-names: List of clock names which are exteral input clocks
- to the given clock controller. Please refer to the
- clock bindings for more details.
-
-Input clocks for zynqmp Ultrascale+ clock controller:
-
-The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
-inputs. These required clock inputs are:
- - pss_ref_clk (PS reference clock)
- - video_clk (reference clock for video system )
- - pss_alt_ref_clk (alternative PS reference clock)
- - aux_ref_clk
- - gt_crx_ref_clk (transceiver reference clock)
-
-The following strings are optional parameters to the 'clock-names' property in
-order to provide an optional (E)MIO clock source:
- - swdt0_ext_clk
- - swdt1_ext_clk
- - gem0_emio_clk
- - gem1_emio_clk
- - gem2_emio_clk
- - gem3_emio_clk
- - mio_clk_XX # with XX = 00..77
- - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
-
-
-Output clocks are registered based on clock information received
-from firmware. Output clocks indexes are mentioned in
-include/dt-bindings/clock/xlnx,zynqmp-clk.h.
-
-------
Example
-------
@@ -72,11 +25,6 @@ firmware {
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
method = "smc";
- zynqmp_clk: clock-controller {
- #clock-cells = <1>;
- compatible = "xlnx,zynqmp-clk";
- clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
- clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
- };
+ ...
};
};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
index 18a2cde2e5f3..1b1a74129141 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
@@ -37,6 +37,20 @@ Optional properties:
- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
for details.
+- resets : Phandle of the GPU reset line.
+
+Vendor-specific bindings
+------------------------
+
+The Mali GPU is integrated very differently from one SoC to
+another. In order to accomodate those differences, you have the option
+to specify one more vendor-specific compatible, among:
+
+- "amlogic,meson-gxm-mali"
+ Required properties:
+ - resets : Should contain phandles of :
+ + GPU reset line
+ + GPU APB glue reset line
Example for a Mali-T760:
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 6ced829b0e58..41b76762953a 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -21,8 +21,6 @@ Optional properties:
Example:
fan0: pwm-fan {
compatible = "pwm-fan";
- cooling-min-state = <0>;
- cooling-max-state = <3>;
#cooling-cells = <2>;
pwms = <&pwm 0 10000 0>;
cooling-levels = <0 102 170 230>;
diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
index 5c184b940669..f1f3a552459b 100644
--- a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
@@ -10,6 +10,7 @@ Required properties:
- clocks: The root clock of the ADC controller
- clock-names: Must contain "adc", matching entry in the clocks property
- vref-supply: The regulator supply ADC reference voltage
+- #io-channel-cells: Must be 1 as per ../iio-bindings.txt
Example:
adc1: adc@30610000 {
@@ -19,4 +20,5 @@ adc1: adc@30610000 {
clocks = <&clks IMX7D_ADC_ROOT_CLK>;
clock-names = "adc";
vref-supply = <&reg_vcc_3v3_mcu>;
+ #io-channel-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
index c81993f8d8c3..c8787688122a 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
@@ -13,6 +13,7 @@ VADC node:
Definition: Should contain "qcom,spmi-vadc".
Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
+ Should contain "qcom,pms405-adc" for PMS405 PMIC
- reg:
Usage: required
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index c5d589108a94..0e312fea2a5d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -1,15 +1,18 @@
-+Mediatek MT65xx/MT67xx/MT81xx sysirq
+MediaTek sysirq
-Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
+MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
interrupt.
Required properties:
- compatible: should be
+ "mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516
+ "mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183
"mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
"mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
+ "mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt
new file mode 100644
index 000000000000..bcc36c5b543c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt
@@ -0,0 +1,35 @@
+Freescale Multi Mode DDR controller (MMDC)
+
+Required properties :
+- compatible : should be one of following:
+ for i.MX6Q/i.MX6DL:
+ - "fsl,imx6q-mmdc";
+ for i.MX6QP:
+ - "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
+ for i.MX6SL:
+ - "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
+ for i.MX6SLL:
+ - "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+ for i.MX6SX:
+ - "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
+ for i.MX6UL/i.MX6ULL/i.MX6ULZ:
+ - "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+ for i.MX7ULP:
+ - "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
+- reg : address and size of MMDC DDR controller registers
+
+Optional properties :
+- clocks : the clock provided by the SoC to access the MMDC registers
+
+Example :
+ mmdc0: memory-controller@21b0000 { /* MMDC0 */
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
+ };
+
+ mmdc1: memory-controller@21b4000 { /* MMDC1 */
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b4000 0x4000>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index 07242d141773..36c4bea675d5 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -13,6 +13,8 @@ Required Properties:
* compatible: should be one of the following.
- "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions.
+ - "hisilicon,hi3670-dw-mshc", "hisilicon,hi3660-dw-mshc": for controllers
+ with hi3670 specific extensions.
- "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
- "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
index 1cd050b4054c..0fdc3dd1125e 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -16,7 +16,9 @@ Device Tree Bindings:
---------------------
Required properties:
-- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+- compatible: should be one of the following :
+ - "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+ - "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
- #power-domain-cells: should be 0
- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
- resets: phandles to the reset lines needed for this power demain sequence
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
index 2bf3344b2a02..2df4bddeb688 100644
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
@@ -5,11 +5,12 @@ Please also refer to reset.txt in this directory for common reset
controller binding usage.
The reset controller registers are part of the system-ctl block on
-hi3660 SoC.
+hi3660 and hi3670 SoCs.
Required properties:
-- compatible: should be
- "hisilicon,hi3660-reset"
+- compatible: should be one of the following:
+ "hisilicon,hi3660-reset" for HI3660
+ "hisilicon,hi3670-reset", "hisilicon,hi3660-reset" for HI3670
- hisi,rst-syscon: phandle of the reset's syscon.
- #reset-cells : Specifies the number of cells needed to encode a
reset source. The type shall be a <u32> and the value shall be 2.
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index bcfb13194f16..c6b5262eb352 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -1,4 +1,4 @@
-* Mediatek Universal Asynchronous Receiver/Transmitter (UART)
+* MediaTek Universal Asynchronous Receiver/Transmitter (UART)
Required properties:
- compatible should contain:
@@ -13,10 +13,12 @@ Required properties:
* "mediatek,mt6797-uart" for MT6797 compatible UARTS
* "mediatek,mt7622-uart" for MT7622 compatible UARTS
* "mediatek,mt7623-uart" for MT7623 compatible UARTS
+ * "mediatek,mt7629-uart" for MT7629 compatible UARTS
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
* "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
+ * "mediatek,mt8516-uart" for MT8516 compatible UARTS
* "mediatek,mt6577-uart" for MT6577 and all of the above
- reg: The base address of the UART register bank.
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index d6fe16f094af..876693a7ada5 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -23,6 +23,7 @@ Required properties:
- "mediatek,mt7622-scpsys"
- "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC
- "mediatek,mt7623a-scpsys": For MT7623A SoC
+ - "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC
- "mediatek,mt8173-scpsys"
- #power-domain-cells: Must be 1
- reg: Address range of the SCPSYS unit
@@ -33,8 +34,8 @@ Required properties:
Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
Required clocks for MT6797: "mm", "mfg", "vdec"
- Required clocks for MT7622: "hif_sel"
- Required clocks for MT7622A: "ethif"
+ Required clocks for MT7622 or MT7629: "hif_sel"
+ Required clocks for MT7623A: "ethif"
Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
Optional properties:
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index ff7c567a7972..74c3eadad844 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -17,6 +17,7 @@ Required properties:
* "mediatek,mt8127-timer" for MT8127 compatible timers (GPT)
* "mediatek,mt8135-timer" for MT8135 compatible timers (GPT)
* "mediatek,mt8173-timer" for MT8173 compatible timers (GPT)
+ * "mediatek,mt8516-timer" for MT8516 compatible timers (GPT)
* "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT)
For those SoCs that use SYST
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 56bccde9953a..a74720486ee2 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -11,6 +11,7 @@ Required properties:
the appropriate jedec string:
"qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
"qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
+ "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
"qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
- interrupts : <interrupt mapping for UFS host controller IRQ>
- reg : <registers mapping>
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index e0e216002efd..e9034a6c003a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -56,6 +56,7 @@ avnet Avnet, Inc.
axentia Axentia Technologies AB
axis Axis Communications AB
azoteq Azoteq (Pty) Ltd
+azw Shenzhen AZW Technology Co., Ltd.
bananapi BIPAI KEJI LIMITED
bhf Beckhoff Automation GmbH & Co. KG
bitmain Bitmain Technologies
@@ -213,6 +214,7 @@ kinetic Kinetic Technologies
kingdisplay King & Display Technology Co., Ltd.
kingnovel Kingnovel Technology Co., Ltd.
kionix Kionix, Inc.
+kobo Rakuten Kobo Inc.
koe Kaohsiung Opto-Electronics Inc.
kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
@@ -248,6 +250,7 @@ melexis Melexis N.V.
melfas MELFAS Inc.
mellanox Mellanox Technologies
memsic MEMSIC Inc.
+menlo Menlo Systems GmbH
merrii Merrii Technology Co., Ltd.
micrel Micrel Inc.
microchip Microchip Technology Inc.
@@ -291,6 +294,7 @@ nuvoton Nuvoton Technology Corporation
nvd New Vision Display
nvidia NVIDIA
nxp NXP Semiconductors
+oceanic Oceanic Systems (UK) Ltd.
okaya Okaya Electric America, Inc.
oki Oki Electric Industry Co., Ltd.
olimex OLIMEX Ltd.
@@ -360,6 +364,7 @@ sandisk Sandisk Corporation
sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
+seirobotics Shenzhen SEI Robotics Co., Ltd
semtech Semtech Corporation
sensirion Sensirion AG
sff Small Form Factor Committee
@@ -368,6 +373,7 @@ sgx SGX Sensortech
sharp Sharp Corporation
shimafuji Shimafuji Electric, Inc.
si-en Si-En Technology Ltd.
+si-linux Silicon Linux Corporation
sifive SiFive, Inc.
sigma Sigma Designs, Inc.
sii Seiko Instruments, Inc.
@@ -422,6 +428,7 @@ toumaz Toumaz
tpk TPK U.S.A. LLC
tplink TP-LINK Technologies Co., Ltd.
tpo TPO
+tq TQ Systems GmbH
tronfy Tronfy
tronsmart Tronsmart
truly Truly Semiconductors Limited
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7af4e3289a89..dab2914fa293 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -366,7 +366,8 @@ dtb-$(CONFIG_SOC_IMX35) += \
imx35-eukrea-mbimxsd35-baseboard.dtb \
imx35-pdk.dtb
dtb-$(CONFIG_SOC_IMX50) += \
- imx50-evk.dtb
+ imx50-evk.dtb \
+ imx50-kobo-aura.dtb
dtb-$(CONFIG_SOC_IMX51) += \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
@@ -383,6 +384,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
imx53-kp-ddc.dtb \
imx53-kp-hsc.dtb \
imx53-m53evk.dtb \
+ imx53-m53menlo.dtb \
imx53-mba53.dtb \
imx53-ppd.dtb \
imx53-qsb.dtb \
@@ -403,6 +405,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-cubox-i-emmc-som-v15.dtb \
imx6dl-cubox-i-som-v15.dtb \
imx6dl-dfi-fs700-m60.dtb \
+ imx6dl-eckelmann-ci4x10.dtb \
imx6dl-emcon-avari.dtb \
imx6dl-gw51xx.dtb \
imx6dl-gw52xx.dtb \
@@ -582,6 +585,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-colibri-emmc-eval-v3.dtb \
imx7d-colibri-eval-v3.dtb \
+ imx7d-mba7.dtb \
imx7d-nitrogen7.dtb \
imx7d-pico-hobbit.dtb \
imx7d-pico-pi.dtb \
@@ -589,7 +593,9 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-sdb.dtb \
imx7d-sdb-reva.dtb \
imx7d-sdb-sht11.dtb \
+ imx7d-zii-rpu2.dtb \
imx7s-colibri-eval-v3.dtb \
+ imx7s-mba7.dtb \
imx7s-warp.dtb
dtb-$(CONFIG_SOC_IMX7ULP) += \
imx7ulp-evk.dtb
@@ -609,6 +615,7 @@ dtb-$(CONFIG_SOC_VF610) += \
vf610-zii-dev-rev-b.dtb \
vf610-zii-dev-rev-c.dtb \
vf610-zii-scu4-aib.dtb \
+ vf610-zii-spb4.dtb \
vf610-zii-ssmb-dtu.dtb \
vf610-zii-ssmb-spu3.dtb
dtb-$(CONFIG_ARCH_MXS) += \
@@ -912,6 +919,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-mickey.dtb \
+ rk3288-veyron-mighty.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-pinky.dtb \
rk3288-veyron-speedy.dtb \
@@ -967,6 +975,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb \
+ stm32mp157a-dk1.dtb \
+ stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
@@ -1094,6 +1104,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-orangepi-zero-plus2.dtb \
+ sun8i-h3-rervision-dvk.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-nintendo-nes-classic.dtb \
sun8i-r16-nintendo-super-nes-classic.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 50dcf1290ac6..2f650a736b44 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -23,14 +23,14 @@
&am33xx_pinmux {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */
- AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
- AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
- AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
- AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index f3f1abd26470..1ba66d5e21e8 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -23,35 +23,35 @@
&am33xx_pinmux {
tca6416_pins: pinmux_tca6416_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */
- AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
- AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
- AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
- AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
- AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
- AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
- AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
- AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
- AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
- AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
-
- AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 42f473f0ed77..eed65fc0e8e6 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -23,43 +23,43 @@
&am33xx_pinmux {
tca6416_pins: pinmux_tca6416_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
>;
};
dcan1_pins: pinmux_dcan1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */
- AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */
- AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
- AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
- AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
- AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
- AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
- AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
- AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
- AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
- AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
- AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
-
- AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
>;
};
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
index 3ab1767d5c13..fe75050c016f 100644
--- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
@@ -42,9 +42,9 @@
&am33xx_pinmux {
user_leds: pinmux_user_leds {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 8c6fc4161ad7..b572ad1f1377 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -53,130 +53,130 @@
&am33xx_pinmux {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
- AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
- AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
- AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
- AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLUP, MUX_MODE7) /* emu0.gpio3[7] */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* emu1.gpio3[8] */
>;
};
tps65910_pins: pinmux_tps65910_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ben1.gpio1[28] */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */
- AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_tx_en.rmii1_txen */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
/* Slave 2 */
- AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
- AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* Slave 2 reset value*/
- AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index 29782be07605..cbd5bd8c57de 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -46,39 +46,39 @@
&am33xx_pinmux {
nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
>;
};
nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */
>;
};
leds_base_pins: pinmux_leds_base_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn3.gpio2_0 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 456eef57ef89..42cfc3b37c32 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -71,118 +71,118 @@
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
- AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
- AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spio0_cs1.gpio0_6 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index e543c2bee8c2..283e288b6e42 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -30,43 +30,43 @@
&am33xx_pinmux {
nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
>;
};
mcasp0_pins: mcasp0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
- AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
- AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
- AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
- AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 83f49f616b19..5b275c96fccf 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -32,35 +32,35 @@
&am33xx_pinmux {
bt_pins: pinmux_bt_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */
>;
};
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
- AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */
- AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */
- AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* mdio_data.uart3_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* mdio_clk.uart3_rtsn */
>;
};
wl18xx_pins: pinmux_wl18xx_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */
- AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index ccb147e70d17..8d241c856c8d 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -130,135 +130,135 @@
&am33xx_pinmux {
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
- AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
- AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
- AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */
- AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */
- AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */
- AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */
- AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
- AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */
>;
};
/* UT0 */
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
/* UT1 */
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* (D16) uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (D15) uart1_txd.uart1_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
/* GPS */
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */
- AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (B17) spi0_d0.uart2_txd */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (B17) spi0_d0.uart2_txd */
>;
};
/* DSM2 */
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */
>;
};
/* UT5 */
uart5_pins: pinmux_uart5_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8C4, PIN_INPUT_PULLUP | MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */
- AM33XX_IOPAD(0x8C0, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* (U1) lcd_data8.uart5_txd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* (U1) lcd_data8.uart5_txd */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */
>;
};
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */
- AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */
>;
};
bt_pins: pinmux_bt_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
- AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
- AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */
>;
};
wl18xx_pins: pinmux_wl18xx_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
- AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
>;
};
/* DCAN */
dcan1_pins: pinmux_dcan1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */
- AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */
- AM33XX_IOPAD(0x940, PIN_OUTPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
index 853e6d3a028d..71317e372ec7 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
@@ -27,8 +27,8 @@
&am33xx_pinmux {
uart2_pins: uart2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
- AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 57731f0daf10..7db86a9c836a 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -32,35 +32,35 @@
&am33xx_pinmux {
bt_pins: pinmux_bt_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */
>;
};
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
- AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
- AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
- AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
- AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
- AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */
- AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */
- AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* mdio_data.uart3_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* mdio_clk.uart3_rtsn */
>;
};
wl18xx_pins: pinmux_wl18xx_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x828, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */
- AM33XX_IOPAD(0x82C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */
- AM33XX_IOPAD(0x87C, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index bffa5dce54ec..31da68355e57 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -41,79 +41,79 @@
&am33xx_pinmux {
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* mdio_data.mdio_data */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
/* mdio_clk.mdio_clk */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
usb1_drvvbus: usb1_drvvbus {
pinctrl-single,pins = <
- AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+ AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
sd_pins: pinmux_sd_card {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
led_gpio_pins: led_gpio_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
- AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+ AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_OUTPUT, MUX_MODE7) /* emu0.gpio3_7 */
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT, MUX_MODE7) /* emu1.gpio3_8 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 1b43ebd08b38..8b88bf6dafc4 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -30,28 +30,28 @@
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
nandflash_pins: nandflash_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
-
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 2c724bb60417..3b0bb88dfc12 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -94,108 +94,85 @@
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
- /* i2c0_scl.i2c0_scl */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
/* uart0_ctsn.i2c1_sda */
- AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE2)
/* uart0_rtsn.i2c1_scl */
- AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)
>;
};
gpio_led_pins: pinmux_gpio_led_pins {
pinctrl-single,pins = <
/* gpmc_csn3.gpio2_0 */
- AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE7)
>;
};
nandflash_pins: pinmux_nandflash_pins {
pinctrl-single,pins = <
- /* gpmc_ad0.gpmc_ad0 */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
- /* gpmc_ad1.gpmc_ad1 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
- /* gpmc_ad2.gpmc_ad2 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
- /* gpmc_ad3.gpmc_ad3 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
- /* gpmc_ad4.gpmc_ad4 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
- /* gpmc_ad5.gpmc_ad5 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
- /* gpmc_ad6.gpmc_ad6 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
- /* gpmc_ad7.gpmc_ad7 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
- /* gpmc_wait0.gpmc_wait0 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
/* gpmc_wpn.gpio0_30 */
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
- /* gpmc_csn0.gpmc_csn0 */
- AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
- /* gpmc_advn_ale.gpmc_advn_ale */
- AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
- /* gpmc_oen_ren.gpmc_oen_ren */
- AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
- /* gpmc_wen.gpmc_wen */
- AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
- /* gpmc_ben0_cle.gpmc_ben0_cle */
- AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
- /* uart0_txd.uart0_txd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- /* uart1_ctsn.uart1_ctsn */
- AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
- /* uart1_rtsn.uart1_rtsn */
- AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
- /* uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
- /* uart1_txd.uart1_txd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
dcan0_pins: pinmux_dcan0_pins {
pinctrl-single,pins = <
/* uart1_ctsn.dcan0_tx */
- AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)
/* uart1_rtsn.dcan0_rx */
- AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2)
>;
};
dcan1_pins: pinmux_dcan1_pins {
pinctrl-single,pins = <
/* uart1_rxd.dcan1_tx */
- AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT, MUX_MODE2)
/* uart1_txd.dcan1_rx */
- AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE2)
>;
};
ecap0_pins: pinmux_ecap0_pins {
pinctrl-single,pins = <
- /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
- AM33XX_IOPAD(0x964, 0x0)
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
>;
};
@@ -203,96 +180,83 @@
pinctrl-single,pins = <
/* Slave 1 */
/* mii1_tx_en.rgmii1_tctl */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
/* mii1_rxdv.rgmii1_rctl */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
/* mii1_txd3.rgmii1_td3 */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
/* mii1_txd2.rgmii1_td2 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
/* mii1_txd1.rgmii1_td1 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
/* mii1_txd0.rgmii1_td0 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
/* mii1_txclk.rgmii1_tclk */
- AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
/* mii1_rxclk.rgmii1_rclk */
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
/* mii1_rxd3.rgmii1_rd3 */
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
/* mii1_rxd2.rgmii1_rd2 */
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
/* mii1_rxd1.rgmii1_rd1 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
/* mii1_rxd0.rgmii1_rd0 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
- /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
- /* mdio_clk.mdio_clk */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
- /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
- /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
- /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
- /* mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
- /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
- /* spi0_sclk.spi0_sclk */
- AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0)
- /* spi0_d0.spi0_d0 */
- AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
- /* spi0_d1.spi0_d1 */
- AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0)
- /* spi0_cs0.spi0_cs0 */
- AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0)
- /* spi0_cs1.spi0_cs1 */
- AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_OUTPUT, MUX_MODE0)
>;
};
@@ -300,7 +264,7 @@
bluetooth_pins: pinmux_bluetooth_pins {
pinctrl-single,pins = <
/* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7)
>;
};
@@ -308,13 +272,13 @@
mcasp1_pins: pinmux_mcasp1_pins {
pinctrl-single,pins = <
/* MII1_CRS.mcasp1_aclkx */
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4)
/* MII1_RX_ER.mcasp1_fsx */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4)
/* MII1_COL.mcasp1_axr2 */
- AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4)
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE4)
/* RMII1_REF_CLK.mcasp1_axr3 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4)
>;
};
@@ -322,9 +286,9 @@
wifi_pins: pinmux_wifi_pins {
pinctrl-single,pins = <
/* EMU1.gpio3_8 - WiFi IRQ */
- AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7)
/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
- AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7)
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index edcff79879e7..55d4392bb7a1 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -190,222 +190,222 @@
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.gpio1_27 */
>;
};
volume_keys_s0: volume_keys_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */
- AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_sclk.gpio0_2 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_d0.gpio0_3 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
- AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
>;
};
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
- AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
- AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
- AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
- AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
- AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
>;
};
wlan_pins: pinmux_wlan_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */
- AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
- AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
>;
};
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
- AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
- AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
- AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
- AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
- AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
- AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
- AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
- AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 2c2d8b5b8cf5..8fc8056db94f 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -227,241 +227,241 @@
lcd_pins_default: lcd_pins_default {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
- AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
- AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
- AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
- AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
- AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
- AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
- AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
>;
};
lcd_pins_sleep: lcd_pins_sleep {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */
- AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */
- AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */
- AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */
- AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */
- AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */
- AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */
- AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */
- AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad8.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad9.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
- AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
- AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
- AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad7.gpio1_7 */
>;
};
gpio_keys_s0: gpio_keys_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */
- AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
- AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
ecap2_pins: backlight_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x99c, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, 0x0, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
/* Slave 2 */
- AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
- AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* Slave 2 reset value*/
- AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 9ac775c71072..4365684fa66f 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -157,111 +157,111 @@
&am33xx_pinmux {
user_leds: user_leds {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
- AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
- AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
- AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
- AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
>;
};
mmc0_pins_default: mmc0_pins_default {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
i2c0_pins_default: i2c0_pins_default {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
- AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
>;
};
spi0_pins_default: spi0_pins_default {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
- AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
- AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
- AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
- AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */
- AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
>;
};
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
- AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1, RMII mode */
- AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_crs.rmii1_crs_dv */
- AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0)) /* rmii1_refclk.rmii1_refclk */
- AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd0.rmii1_rxd0 */
- AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd1.rmii1_rxd1 */
- AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxerr.rmii1_rxerr */
- AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd0.rmii1_txd0 */
- AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd1.rmii1_txd1 */
- AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txen.rmii1_txen */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */
/* Slave 2, RMII mode */
- AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wait0.rmii2_crs_dv */
- AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_col.rmii2_refclk */
- AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a11.rmii2_rxd0 */
- AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a10.rmii2_rxd1 */
- AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wpn.rmii2_rxerr */
- AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a5.rmii2_txd0 */
- AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a4.rmii2_txd1 */
- AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a0.rmii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wait0.rmii2_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_col.rmii2_refclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a11.rmii2_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a10.rmii2_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wpn.rmii2_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a5.rmii2_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a4.rmii2_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a0.rmii2_txen */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* Slave 2 reset value */
- AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0)) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7))
- AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index cbd22f25de95..312deb6cf6a2 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -57,41 +57,41 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
nandflash_pins: pinmux_nandflash_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index d0e8e720a4d6..aa4cd2b8d4b6 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -46,109 +46,109 @@
&am33xx_pinmux {
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rxer */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_txen */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
/* Slave 2 */
- AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
- AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
- AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
- AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_int */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rxer */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_txen */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_refclk */
/* Slave 2 reset value*/
- AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */
- AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */
- AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */
- AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
- AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rxer */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_int */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_refclk */
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index cb5913a69837..671d4a5da9c4 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -33,54 +33,54 @@
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
push_button_pins: pinmux_push_button {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2_23 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_23 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
mmc1_pins_default: pinmux_mmc1_pins {
pinctrl-single,pins = <
/* eMMC */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
>;
};
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
- AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
- AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
- AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
index 48aee6de4cdb..5923b6e7e1cb 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
@@ -31,23 +31,23 @@
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
>;
};
spi1_pins: pinmux_spi1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */
- AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */
- AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart1_ctsn.spi1_cs0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_ctsn.spi1_d0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_rtsn.spi1_d1 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
index e562ce40f290..5a2fb4bd4e02 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -104,79 +104,79 @@
minipcie_pins: pinmux_minipcie {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2_24 */
- AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */
- AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/
>;
};
push_button_pins: pinmux_push_button {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_ctsn.i2c1_sda */
- AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_rtsn.i2c1_scl */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE6) /* lcd_data14.uart5_ctsn */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data15.uart5_rtsn */
- AM33XX_IOPAD(0x8c4, PIN_INPUT_PULLUP | MUX_MODE4) /* lcd_data9.uart5_rxd */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE4) /* lcd_data8.uart5_txd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
/* Slave 2 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
- AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
- AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
- AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */
>;
};
@@ -184,46 +184,46 @@
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
mmc0_pins_default: pinmux_mmc0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
- AM33XX_IOPAD(0x990, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */
- AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */
>;
};
mmc2_pins_default: pinmux_mmc2_pins {
pinctrl-single,pins = <
/* eMMC */
- AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
- AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
- AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
- AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
- AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */
- AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */
- AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */
- AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */
- AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
- AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */
>;
};
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
- AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
- AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
- AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 9c9143ed4003..0052657331ee 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -41,121 +41,121 @@
misc_pins: misc_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7) /* spi0_cs0.gpio0_5 */
>;
};
gpmc_pins: gpmc_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */
- AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */
- AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */
- AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */
- AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */
- AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */
- AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */
- AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */
-
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */
- AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */
- AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */
-
- AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */
-
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */
-
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE0)
+
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE0)
+
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE1) /* lcd_data1.gpmc_a1 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE1) /* lcd_data2.gpmc_a2 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE1) /* lcd_data3.gpmc_a3 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE1) /* lcd_data4.gpmc_a4 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE1) /* lcd_data5.gpmc_a5 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE1) /* lcd_data6.gpmc_a6 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE1) /* lcd_data7.gpmc_a7 */
+
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE1) /* lcd_vsync.gpmc_a8 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE1) /* lcd_hsync.gpmc_a9 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE1) /* lcd_pclk.gpmc_a10 */
>;
};
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE0)
>;
};
uart0_pins: uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
>;
};
uart1_pins: uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
- AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
>;
};
uart2_pins: uart2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */
- AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
- AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data8.gpio2[14] */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7) /* lcd_data9.gpio2[15] */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd */
>;
};
uart3_pins: uart3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */
- AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE6) /* lcd_data10.uart3_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE6) /* lcd_data11.uart3_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1) /* spi0_cs1.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
>;
};
uart4_pins: uart4_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */
- AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */
- AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE6) /* lcd_data12.uart4_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE6) /* lcd_data13.uart4_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1) /* uart0_ctsn.uart4_rxd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1) /* uart0_rtsn.uart4_txd */
>;
};
uart5_pins: uart5_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */
- AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE4) /* lcd_data14.uart5_rxd */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT, MUX_MODE3) /* rmiii1_refclk.uart5_txd */
>;
};
mmc1_pins: mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
- AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7) /* emu1.gpio3[8] */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 95d54cf3849e..f47cc9fea253 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -40,61 +40,61 @@
&am33xx_pinmux {
nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
>;
};
mcasp0_pins: mcasp0-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
- AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
- AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
- AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
- AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
>;
};
flash_enable: flash-enable {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */
>;
};
imu_interrupt: imu-interrupt {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_rx_er.gpio3_2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_rx_er.gpio3_2 */
>;
};
ethernet_interrupt: ethernet-interrupt{
pinctrl-single,pins = <
- AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 */
>;
};
};
@@ -269,109 +269,109 @@
user_leds_s0: user-leds-s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
- AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */
>;
};
i2c2_pins: pinmux-i2c2-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
- AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */
>;
};
uart0_pins: pinmux-uart0-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
clkout2_pin: pinmux-clkout2-pin {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
cpsw_default: cpsw-default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_txd3 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_txd2 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
- AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_txclk */
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rxclk */
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
>;
};
cpsw_sleep: cpsw-sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci-mdio-default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci-mdio-sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
mmc1_pins: pinmux-mmc1-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
emmc_pins: pinmux-emmc-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
index f8ff473f94f0..a8b6842489f7 100644
--- a/arch/arm/boot/dts/am335x-osd335x-common.dtsi
+++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
@@ -36,8 +36,8 @@
&am33xx_pinmux {
i2c0_pins: pinmux-i2c0-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 1ec8e0d80191..baceaa7bb33b 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -79,15 +79,15 @@
&am33xx_pinmux {
user_buttons_pins: pinmux_user_buttons {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu0.gpio3_7 */
- AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu1.gpio3_8 */
+ AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */
>;
};
user_leds_pins: pinmux_user_leds {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x880, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
- AM33XX_IOPAD(0x884, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */
>;
};
};
@@ -96,8 +96,8 @@
&am33xx_pinmux {
dcan1_pins: pinmux_dcan1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */
- AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */
>;
};
};
@@ -112,18 +112,18 @@
&am33xx_pinmux {
ethernet1_pins: pinmux_ethernet1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
- AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
};
@@ -171,8 +171,8 @@
cb_gpio_pins: pinmux_cb_gpio {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_ctsn.gpio1_8 */
- AM33XX_IOPAD(0x96c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_rtsn.gpio1_9 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */
>;
};
};
@@ -181,13 +181,13 @@
&am33xx_pinmux {
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
>;
};
};
@@ -205,31 +205,31 @@
&am33xx_pinmux {
uart0_pins: pinmux_uart0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
- AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart2_pins: pinmux_uart2 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_tx_clk.uart2_rxd */
- AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rx_clk.uart2_txd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */
>;
};
uart3_pins: pinmux_uart3 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd3.uart3_rxd */
- AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd2.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index ae43d61f4e8b..3141255f72c2 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -92,162 +92,162 @@
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
- AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_clk.i2c2_sda */
- AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d0.i2c2_scl */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_clk.i2c2_sda */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d0.i2c2_scl */
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
- AM33XX_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
- AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
- AM33XX_IOPAD(0x99C, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x96C, PIN_OUTPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE1) /* spi0_cs1.uart3_rxd */
- AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1) /* spi0_cs1.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Port 1 (emac0) */
- AM33XX_IOPAD(0x908, PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */
- AM33XX_IOPAD(0x90C, PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */
- AM33XX_IOPAD(0x910, PIN_INPUT | MUX_MODE0) /* mii1_rxer.mii1_rxer */
- AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE0) /* mii1_txen.mii1_txen */
- AM33XX_IOPAD(0x918, PIN_INPUT | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
- AM33XX_IOPAD(0x92c, PIN_INPUT | MUX_MODE0) /* mii1_txclk.mii1_txclk */
- AM33XX_IOPAD(0x930, PIN_INPUT | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
- AM33XX_IOPAD(0x934, PIN_INPUT | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
- AM33XX_IOPAD(0x938, PIN_INPUT | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
- AM33XX_IOPAD(0x93c, PIN_INPUT | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT, MUX_MODE0)
/* Port 2 (emac1) */
- AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* mii2_txen.gpmc_a0 */
- AM33XX_IOPAD(0x844, PIN_INPUT | MUX_MODE1) /* mii2_rxdv.gpmc_a1 */
- AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* mii2_txd3.gpmc_a2 */
- AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* mii2_txd2.gpmc_a3 */
- AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* mii2_txd1.gpmc_a4 */
- AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* mii2_txd0.gpmc_a5 */
- AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE1) /* mii2_txclk.gpmc_a6 */
- AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE1) /* mii2_rxclk.gpmc_a7 */
- AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE1) /* mii2_rxd3.gpmc_a8 */
- AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE1) /* mii2_rxd2.gpmc_a9 */
- AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE1) /* mii2_rxd1.gpmc_a10 */
- AM33XX_IOPAD(0x86C, PIN_INPUT | MUX_MODE1) /* mii2_rxd0.gpmc_a11 */
- AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE1) /* mii2_crs.gpmc_wait0 */
- AM33XX_IOPAD(0x874, PIN_INPUT | MUX_MODE1) /* mii2_rxer.gpmc_wpn */
- AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE1) /* mii2_col.gpmc_ben1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* mii2_txen.gpmc_a0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT, MUX_MODE1) /* mii2_rxdv.gpmc_a1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* mii2_txd3.gpmc_a2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* mii2_txd2.gpmc_a3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* mii2_txd1.gpmc_a4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* mii2_txd0.gpmc_a5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT, MUX_MODE1) /* mii2_txclk.gpmc_a6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT, MUX_MODE1) /* mii2_rxclk.gpmc_a7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE1) /* mii2_rxd3.gpmc_a8 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE1) /* mii2_rxd2.gpmc_a9 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE1) /* mii2_rxd1.gpmc_a10 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE1) /* mii2_rxd0.gpmc_a11 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT, MUX_MODE1) /* mii2_crs.gpmc_wait0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT, MUX_MODE1) /* mii2_rxer.gpmc_wpn */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT, MUX_MODE1) /* mii2_col.gpmc_ben1 */
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
mmc1_pins: pinmux_mmc1_pins {
/* eMMC */
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
mmc2_pins: pinmux_mmc2_pins {
/* SD cardcage */
pinctrl-single,pins = <
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
/* card change signal for frontpanel SD cardcage */
- AM33XX_IOPAD(0x890, PIN_INPUT | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT, MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
>;
};
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
>;
};
dcan0_pins: pinmux_dcan0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
- AM33XX_IOPAD(0x97c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart1_ctsn.d_can0_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart1_rtsn.d_can0_rx */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 6be79b8349ac..5c3e49f93ac4 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -93,14 +93,14 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
i2c1_pins: pinmux_i2c1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_crs,i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_rxerr,i2c1_scl */
>;
};
};
@@ -130,7 +130,7 @@
&am33xx_pinmux {
accel_pins: pinmux_accel {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */
>;
};
};
@@ -177,12 +177,12 @@
&am33xx_pinmux {
audio_pins: pinmux_audio {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
- AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
- AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
- AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
- AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
- AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7) /* gpmc_a0.gpio1_16 */
>;
};
};
@@ -228,36 +228,36 @@
&am33xx_pinmux {
lcd_pins: pinmux_lcd {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */
- AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */
- AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */
- AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */
- AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */
- AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */
- AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */
- AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
/* Display Enable */
- AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a11.gpio1_27 */
>;
};
};
@@ -299,29 +299,29 @@
&am33xx_pinmux {
ethernet_pins: pinmux_ethernet {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE2)
/* ethernet interrupt */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE7) /* rmii2_refclk.gpio0_29 */
/* ethernet PHY nReset */
- AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLUP, MUX_MODE7) /* mii1_col.gpio3_0 */
>;
};
mdio_pins: pinmux_mdio {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
};
@@ -364,45 +364,45 @@
&am33xx_pinmux {
sd_pins: pinmux_sd_card {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
emmc_pins: pinmux_emmc {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
/* EMMC nReset */
- AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
>;
};
wireless_pins: pinmux_wireless {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
- AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
- AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
- AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */
- AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
- AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc1_clk */
/* WLAN nReset */
- AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */
/* WLAN nPower down */
- AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_wait0.gpio0_30 */
/* 32kHz Clock */
- AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
};
@@ -498,10 +498,10 @@
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
- AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
- AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
- AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
};
@@ -539,16 +539,16 @@
&am33xx_pinmux {
uart0_pins: pinmux_uart0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
};
@@ -591,9 +591,9 @@
usb_pins: pinmux_usb {
pinctrl-single,pins = <
/* USB0 Over-Current (active low) */
- AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7) /* gpmc_a9.gpio1_25 */
/* USB1 Over-Current (active low) */
- AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_26 */
>;
};
};
@@ -649,16 +649,16 @@
&am33xx_pinmux {
user_leds_pins: pinmux_user_leds {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */
- AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7) /* gpmc_a4.gpio1_20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */
>;
};
user_buttons_pins: pinmux_user_buttons {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */
- AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a7.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio0_7 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 015adb626b03..23c3039c567e 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -57,22 +57,22 @@
&am33xx_pinmux {
ethernet0_pins: pinmux_ethernet0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */
- AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
>;
};
mdio_pins: pinmux_mdio {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
};
@@ -104,8 +104,8 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
>;
};
};
@@ -144,20 +144,20 @@
&am33xx_pinmux {
nandflash_pins: pinmux_nandflash {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
>;
};
};
@@ -296,10 +296,10 @@
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */
- AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */
- AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
- AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
index 62fe5cab9fae..ff4f919d22f6 100644
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -62,74 +62,74 @@
&am33xx_pinmux {
i2c2_pins: pinmux-i2c2-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
>;
};
ehrpwm0_pins: pinmux-ehrpwm0-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */
>;
};
ehrpwm1_pins: pinmux-ehrpwm1-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */
>;
};
mmc0_pins: pinmux-mmc0-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */
>;
};
spi0_pins: pinmux-spi0-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
- AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
- AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
- AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
spi1_pins: pinmux-spi1-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */
- AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */
- AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */
- AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */
>;
};
usr_leds_pins: pinmux-usr-leds-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
- AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
- AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
>;
};
uart0_pins: pinmux-uart0-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart4_pins: pinmux-uart4-pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */
- AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 35527fdf56cc..7ed27b5c4756 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -23,70 +23,70 @@
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
usb_hub_ctrl: usb_hub_ctrl {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLUP | MUX_MODE7) /* rmii1_refclk.gpio0_29 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* rmii1_refclk.gpio0_29 */
>;
};
mpu6050_pins: pinmux_mpu6050_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE7) /* uart0_ctsn.gpio1_8 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7) /* uart0_ctsn.gpio1_8 */
>;
};
lps3331ap_pins: pinmux_lps3331ap_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_26 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
index 917d7ccc9109..07c46a59f1d2 100644
--- a/arch/arm/boot/dts/am335x-sbc-t335.dts
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -70,122 +70,82 @@
lcd_pins_default: lcd_pins_default {
pinctrl-single,pins = <
/* gpmc_ad8.lcd_data23 */
- AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)
/* gpmc_ad9.lcd_data22 */
- AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)
/* gpmc_ad10.lcd_data21 */
- AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)
/* gpmc_ad11.lcd_data20 */
- AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)
/* gpmc_ad12.lcd_data19 */
- AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)
/* gpmc_ad13.lcd_data18 */
- AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)
/* gpmc_ad14.lcd_data17 */
- AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)
/* gpmc_ad15.lcd_data16 */
- AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)
- /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
- /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)
- /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)
- /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)
- /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)
- /* lcd_ac_bias_en.lcd_ac_bias_en */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
>;
};
lcd_pins_sleep: lcd_pins_sleep {
pinctrl-single,pins = <
/* gpmc_ad8.lcd_data23 */
- AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* gpmc_ad9.lcd_data22 */
- AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* gpmc_ad10.lcd_data21 */
- AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* gpmc_ad11.lcd_data20 */
- AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* gpmc_ad12.lcd_data19 */
- AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* gpmc_ad13.lcd_data18 */
- AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* gpmc_ad14.lcd_data17 */
- AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
/* gpmc_ad15.lcd_data16 */
- AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)
- /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)
- /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)
- /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)
- /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)
- /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)
- /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)
- /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)
- /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)
- /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)
- /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)
- /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)
- /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)
- /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)
- /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)
- /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)
- /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)
- /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)
- /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
- /* lcd_ac_bias_en.lcd_ac_bias_en */
- AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index bfbe27a80006..5b0368504015 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -382,193 +382,191 @@
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
/* xdma_event_intr1.clkout2 */
- AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT, MUX_MODE6)
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
- /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
- /* mdio_clk.mdio_clk */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
ehrpwm1_pins: pinmux_ehrpwm1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.gpio1_19 */
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
- AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE5)
>;
};
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
- AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
- AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
- AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
- AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
- AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT, MUX_MODE3)
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
- AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
- AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
- AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
- AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)
>;
};
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
- AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE6)
>;
};
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
- AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
- AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
- AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
- AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
- AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
- AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
- AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
- AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
- AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLUP, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLUP, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7)
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 38d57b89f7d3..1ac0c8aa98c5 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -218,227 +218,227 @@
audio_pins: pinmux_audio_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
- AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
- AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
- AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
- AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
>;
};
audio_pa_pins: pinmux_audio_pa_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */
>;
};
audio_mclk_pins: pinmux_audio_mclk_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.gpio1_27 */
>;
};
backlight0_pins: pinmux_backlight0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */
>;
};
backlight1_pins: pinmux_backlight1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* gpmc_ad10.gpio0_26 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */
>;
};
lcd_pins: pinmux_lcd_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
led_pins: pinmux_led_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* gpmc_a7.gpio1_23 */
- AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* gpmc_a8.gpio1_24 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */
- AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* gpmc_wait0.uart4_rxd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* gpmc_wpn.uart4_txd */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
- AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
/* Ethernet */
- AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7) /* uart0_rtsn.gpio1_9 */
>;
};
emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a4.gpio1_20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a4.gpio1_20 */
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
ehrpwm1_pins: pinmux_ehrpwm1a_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */
- AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6) /* gpmc_a2.ehrpwm1a */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.ehrpwm1b */
>;
};
rtc0_irq_pins: pinmux_rtc0_irq_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad9.gpio0_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ad9.gpio0_23 */
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MOSI - spi0_d0.spi0_d0 */
- AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MISO - spi0_d1.spi0_d1 */
- AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CLK - spi0_clk.spi0_clk */
- AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */
- AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MOSI */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MISO */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_CS0 (NBATTSS) */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) */
>;
};
lwb_pins: pinmux_lwb_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */
- AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */
/* PDI Bus - Battery system */
- AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */
- AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */
/* FPGA */
- AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */
- AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 8ce541739b24..b7d28a20341f 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -32,11 +32,11 @@
&am33xx_pinmux {
mcasp0_pins: pinmux_mcasp0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
- AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
- AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
- AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
- AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
};
@@ -84,8 +84,8 @@
&am33xx_pinmux {
dcan1_pins: pinmux_dcan1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
- AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
>;
};
};
@@ -100,20 +100,20 @@
&am33xx_pinmux {
ethernet1_pins: pinmux_ethernet1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */
- AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */
- AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */
- AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */
- AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */
- AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */
- AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */
- AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */
- AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
- AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
- AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
- AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
- AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */
>;
};
};
@@ -141,13 +141,13 @@
&am33xx_pinmux {
mmc1_pins: pinmux_mmc1 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
>;
};
};
@@ -171,17 +171,17 @@
&am33xx_pinmux {
uart0_pins: pinmux_uart0 {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
- AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 9dfd80e3b76e..9b8b132b04e1 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -80,6 +80,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&matrix_keypad_default>;
pinctrl-1 = <&matrix_keypad_sleep>;
+ wakeup-source;
row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
&gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
@@ -620,6 +621,12 @@
regulator-name = "vdcdc3";
regulator-boot-on;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
};
dcdc4: regulator-dcdc4 {
@@ -634,12 +641,16 @@
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
};
dcdc6: regulator-dcdc6 {
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
};
ldo1: regulator-ldo1 {
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
new file mode 100644
index 000000000000..d51007c3e8c4
--- /dev/null
+++ b/arch/arm/boot/dts/am5718.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "dra72x.dtsi"
+
+/ {
+ compatible = "ti,am5718", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5718
+ *
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3, USB4
+ */
+
+&usb3_tm {
+ status = "disabled";
+};
+
+&usb4_tm {
+ status = "disabled";
+};
+
+&atl_tm {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 6432309b39e3..66116ad3f9f4 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -7,7 +7,7 @@
*/
/dts-v1/;
-#include "dra72x.dtsi"
+#include "am5718.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "dra7-mmc-iodelay.dtsi"
diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi
new file mode 100644
index 000000000000..82e5427ef6a9
--- /dev/null
+++ b/arch/arm/boot/dts/am5728.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+ compatible = "ti,am5728", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5728
+ *
+ * EVE1, EVE2
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3, USB4
+ */
+
+&usb3_tm {
+ status = "disabled";
+};
+
+&usb4_tm {
+ status = "disabled";
+};
+
+&atl_tm {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index b2fb6e097be7..4f835222c266 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -8,15 +8,14 @@
/dts-v1/;
-#include "dra74x.dtsi"
+#include "am5728.dtsi"
#include "dra7-mmc-iodelay.dtsi"
#include "dra74x-mmc-iodelay.dtsi"
#include "am572x-idk-common.dtsi"
/ {
model = "TI AM5728 IDK";
- compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
- "ti,dra7";
+ compatible = "ti,am5728-idk", "ti,am5728", "ti,dra7";
};
&mmc1 {
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
new file mode 100644
index 000000000000..5e129759d04a
--- /dev/null
+++ b/arch/arm/boot/dts/am5748.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "dra76x.dtsi"
+
+/ {
+ compatible = "ti,am5748", "ti,dra762", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5748
+ *
+ * EVE1, EVE2
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3, USB4
+ */
+
+&usb3_tm {
+ status = "disabled";
+};
+
+&usb4_tm {
+ status = "disabled";
+};
+
+&atl_tm {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 378dfa780ac1..dc5141c35610 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -6,14 +6,14 @@
/dts-v1/;
-#include "dra76x.dtsi"
+#include "am5748.dtsi"
#include "dra7-mmc-iodelay.dtsi"
#include "dra76x-mmc-iodelay.dtsi"
#include "am572x-idk-common.dtsi"
/ {
model = "TI AM5748 IDK";
- compatible = "ti,am5728-idk", "ti,dra762", "ti,dra7";
+ compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7";
};
&qspi {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 1e6620f139dd..2341a56ebab9 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -7,7 +7,7 @@
*/
/dts-v1/;
-#include "dra74x.dtsi"
+#include "am5728.dtsi"
#include "am57xx-commercial-grade.dtsi"
#include "dra74x-mmc-iodelay.dtsi"
#include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 4748ce8747ad..0460de0da2bf 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -13,7 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include "dra74x.dtsi"
+#include "am5728.dtsi"
/ {
model = "CompuLab CL-SOM-AM57x";
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 96c18703e471..3f4bb44d85f0 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -415,6 +415,8 @@
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
clocks = <&coreclk 2>, <&refclk>;
clock-names = "nbclk", "fixed";
+ interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
cpurst: cpurst@20800 {
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 2375449c02d0..556ed469830c 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -13,12 +13,25 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
};
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
};
&fmc {
@@ -27,6 +40,7 @@
status = "okay";
m25p,fast-read;
label = "bmc";
+#include "openbmc-flash-layout.dtsi"
};
};
@@ -97,3 +111,8 @@
&uhci {
status = "okay";
};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
index 9f194b5eeba4..43aba4071a5c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -56,6 +56,12 @@
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
+
+ ast-adc-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+ };
};
&pinctrl {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index 4c2dcac738e8..c4521eda787c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -64,6 +64,11 @@
status = "okay";
};
+&vuart {
+ // VUART Host Console
+ status = "okay";
+};
+
&uart1 {
// Host Console
status = "okay";
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index b854ac0bae9a..b249da80fb83 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -32,9 +32,9 @@
no-map;
};
- flash_memory: region@98000000 {
+ flash_memory: region@5c000000 {
no-map;
- reg = <0x98000000 0x01000000>; /* 16MB */
+ reg = <0x5C000000 0x02000000>; /* 32MB */
};
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 76fe994f2ba4..418a1988b262 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -35,6 +35,13 @@
reg = <0x9ef00000 0x00100000>;
no-map;
};
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
};
leds {
@@ -238,6 +245,7 @@
&gfx {
status = "okay";
+ memory-region = <&gfx_memory>;
};
&pinctrl {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index ad54117c075e..f1356ca794d8 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -26,6 +26,13 @@
no-map;
reg = <0x98000000 0x04000000>; /* 64M */
};
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
};
gpio-keys {
@@ -186,13 +193,49 @@
status = "okay";
label = "bmc";
m25p,fast-read;
-#include "openbmc-flash-layout.dtsi"
+
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "obmc-ubi";
+ };
+ };
};
flash@1 {
status = "okay";
- label = "alt";
+ label = "alt-bmc";
m25p,fast-read;
+
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "alt-u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "alt-u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "alt-obmc-ubi";
+ };
+ };
+
};
};
@@ -565,6 +608,7 @@
&gfx {
status = "okay";
+ memory-region = <&gfx_memory>;
};
&pinctrl {
@@ -592,3 +636,7 @@
&adc {
status = "okay";
};
+
+&vhub {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9549f867aa1e..5d7050d00874 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -209,6 +209,12 @@
clock-names = "PCLK";
};
+ rtc: rtc@1e781000 {
+ compatible = "aspeed,ast2400-rtc";
+ reg = <0x1e781000 0x18>;
+ status = "disabled";
+ };
+
uart1: serial@1e783000 {
compatible = "ns16550a";
reg = <0x1e783000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 85ed9dbec196..4345c3153ca7 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -232,6 +232,10 @@
compatible = "aspeed,ast2500-gfx", "syscon";
reg = <0x1e6e6000 0x1000>;
reg-io-width = <4>;
+ clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+ resets = <&syscon ASPEED_RESET_CRT1>;
+ status = "disabled";
+ interrupts = <0x19>;
};
adc: adc@1e6e9000 {
@@ -243,6 +247,16 @@
status = "disabled";
};
+ video: video@1e700000 {
+ compatible = "aspeed,ast2500-video-engine";
+ reg = <0x1e700000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+ <&syscon ASPEED_CLK_GATE_ECLK>;
+ clock-names = "vclk", "eclk";
+ interrupts = <7>;
+ status = "disabled";
+ };
+
sram: sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x9000>; // 36K
@@ -260,6 +274,12 @@
#interrupt-cells = <2>;
};
+ rtc: rtc@1e781000 {
+ compatible = "aspeed,ast2500-rtc";
+ reg = <0x1e781000 0x18>;
+ status = "disabled";
+ };
+
timer: timer@1e782000 {
/* This timer is a Faraday FTTMR010 derivative */
compatible = "aspeed,ast2400-timer";
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 33a159c0163f..7788d5db65c2 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
*
* Copyright (c) 2017, Microchip Technology Inc.
* 2017 Cristian Birsan <cristian.birsan@microchip.com>
* 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index a48180555ef5..89f0c9979b89 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
*
@@ -5,44 +6,6 @@
* 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
* 2017 Cristian Birsan <cristian.birsan@microchip.com>
* 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "at91-sama5d27_som1.dtsi"
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index fa54e8866f1e..808e399fd39a 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -1,52 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
*
* Copyright (C) 2015 Atmel,
* 2015 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
/ {
model = "Atmel SAMA5D2 Xplained";
@@ -181,49 +145,102 @@
regulator-name = "VDD_1V35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-min-microvolt=<1400000>;
+ regulator-suspend-max-microvolt=<1400000>;
+ regulator-changeable-in-suspend;
+ regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ };
};
vdd_1v2_reg: REG_DCDC2 {
regulator-name = "VDD_1V2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_3v3_reg: REG_DCDC3 {
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_fuse_reg: REG_LDO1 {
regulator-name = "VDD_FUSE";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_3v3_lp_reg: REG_LDO2 {
regulator-name = "VDD_3V3_LP";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_led_reg: REG_LDO3 {
regulator-name = "VDD_LED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_sdhc_1v8_reg: REG_LDO4 {
regulator-name = "VDD_SDHC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 43aef56ac74a..fdfc37d716e0 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
*
* Copyright (C) 2015 Atmel,
* 2015 Josh Wu <josh.wu@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sama5d4.dtsi"
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 12d5af938aa3..0cc1cff13e46 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
*
* Copyright (C) 2014 Atmel,
* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sama5d4.dtsi"
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index 430277291e02..15050fdd479d 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for VInCo platform
*
* Copyright (C) 2014 Atmel,
* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
* 2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sama5d4.dtsi"
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index 07d1b571e601..81f808a10931 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Atmel at91sam9260 Evaluation Kit
*
* Copyright (C) 2016 Atmel,
* 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "at91sam9260.dtsi"
diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi
index 1304452f0fae..3f9d8caf8b0a 100644
--- a/arch/arm/boot/dts/at91sam9xe.dtsi
+++ b/arch/arm/boot/dts/at91sam9xe.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
*
* Copyright (C) 2015 Atmel,
* 2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "at91sam9260.dtsi"
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
index bd83962d3627..1dfeeceabf4c 100644
--- a/arch/arm/boot/dts/axp81x.dtsi
+++ b/arch/arm/boot/dts/axp81x.dtsi
@@ -171,4 +171,8 @@
status = "disabled";
};
};
+
+ usb_power_supply: usb-power-supply {
+ compatible = "x-powers,axp813-usb-power-supply";
+ };
};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 414f1cd68733..fe9f0bc29fec 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -2499,7 +2499,7 @@
ranges = <0x0 0x3a000 0x1000>;
};
- target-module@3c000 { /* 0x4843c000, ap 23 08.0 */
+ atl_tm: target-module@3c000 { /* 0x4843c000, ap 23 08.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x3c000 0x4>;
reg-names = "rev";
@@ -4099,7 +4099,7 @@
};
};
- target-module@100000 { /* 0x48900000, ap 85 04.0 */
+ usb3_tm: target-module@100000 { /* 0x48900000, ap 85 04.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "usb_otg_ss3";
reg = <0x100000 0x4>,
@@ -4148,7 +4148,7 @@
};
};
- target-module@140000 { /* 0x48940000, ap 75 3c.0 */
+ usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "usb_otg_ss4";
reg = <0x140000 0x4>,
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 2bc9add8b7a5..d87e932f45bd 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -193,6 +193,7 @@
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
+ ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie1_intc 1>,
<0 0 0 2 &pcie1_intc 2>,
@@ -218,6 +219,7 @@
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
+ ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 1bb8e5c9d029..abfff54d6de5 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -25,7 +25,7 @@
};
chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial1:115200n8";
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 5892a9f7622f..8ce3a7786b19 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -97,42 +97,46 @@
};
};
- soc: soc {
- compatible = "simple-bus";
+ fixed-rate-clocks {
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- fixed-rate-clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <0>;
- xusbxti: clock@0 {
- compatible = "fixed-clock";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- clock-frequency = <0>;
- #clock-cells = <0>;
- clock-output-names = "xusbxti";
- };
+ xusbxti: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xusbxti";
+ };
- xxti: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-frequency = <0>;
- #clock-cells = <0>;
- clock-output-names = "xxti";
- };
+ xxti: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xxti";
+ };
- xtcxo: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- clock-frequency = <0>;
- #clock-cells = <0>;
- clock-output-names = "xtcxo";
- };
+ xtcxo: clock@2 {
+ compatible = "fixed-clock";
+ reg = <2>;
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xtcxo";
};
+ };
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
sysram@2020000 {
compatible = "mmio-sram";
@@ -673,12 +677,6 @@
status = "disabled";
};
- pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- };
-
ppmu_dmc0: ppmu_dmc0@106a0000 {
compatible = "samsung,exynos-ppmu";
reg = <0x106a0000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 6085e92ac2d7..36ccf227434d 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -51,6 +51,12 @@
serial3 = &serial_3;
};
+ pmu: pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <2 2>, <3 2>;
+ };
+
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -169,12 +175,6 @@
reg = <0x10440000 0x1000>;
};
- pmu: pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupt-parent = <&combiner>;
- interrupts = <2 2>, <3 2>;
- };
-
sys_reg: syscon@10010000 {
compatible = "samsung,exynos4-sysreg", "syscon";
reg = <0x10010000 0x400>;
@@ -675,7 +675,7 @@
status = "disabled";
};
- amba {
+ amba: amba {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index dd9ec05eb0f7..36b1edea254a 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -30,8 +30,8 @@
};
chosen {
- bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
- stdout-path = &serial_2;
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+ stdout-path = "serial2:115200n8";
};
mmc_reg: voltage-regulator {
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 7a3e621edede..77fc11e593ad 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -26,8 +26,8 @@
};
chosen {
- bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
- stdout-path = &serial_1;
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+ stdout-path = "serial1:115200n8";
};
fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 8dbc47d627a5..6882480dbaf7 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -26,8 +26,8 @@
};
chosen {
- bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
- stdout-path = &serial_2;
+ bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+ stdout-path = "serial2:115200n8";
};
regulators {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 5c3d98654f13..bf092e97e14f 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -24,8 +24,8 @@
};
chosen {
- bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
- stdout-path = &serial_2;
+ bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
+ stdout-path = "serial2:115200n8";
};
@@ -177,6 +177,20 @@
};
};
+&amba {
+ mdma0: mdma@12840000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12840000 0x1000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MDMA>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ power-domains = <&pd_lcd0>;
+ };
+};
+
&camera {
status = "okay";
@@ -491,7 +505,8 @@
};
&mdma1 {
- reg = <0x12840000 0x1000>;
+ /* Use the secure mdma0 */
+ status = "disabled";
};
&mixer {
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 2bdf899df436..96d99887bceb 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -34,8 +34,6 @@
fan0: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 0 10000 0>;
- cooling-min-state = <0>;
- cooling-max-state = <3>;
#cooling-cells = <2>;
cooling-levels = <0 102 170 230>;
};
@@ -66,6 +64,11 @@
};
};
+&adc {
+ vdd-supply = <&ldo10_reg>;
+ /* Nothing connected to ADC inputs, keep it disabled */
+};
+
/* Supply for LAN9730/SMSC95xx */
&buck8_reg {
regulator-name = "BUCK8_P3V3";
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 346f71932457..698de4345d16 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -25,8 +25,7 @@
};
chosen {
- bootargs ="console=ttySAC2,115200";
- stdout-path = &serial_2;
+ stdout-path = "serial2:115200n8";
};
firmware@203f000 {
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index 5c5c2887c14f..e70fb6e601f0 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -23,8 +23,8 @@
};
chosen {
- bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
- stdout-path = &serial_1;
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+ stdout-path = "serial1:115200n8";
};
fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 327ee980d3a5..aac533933c61 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -22,6 +22,7 @@
};
chosen {
- bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+ bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+ stdout-path = "serial2:115200n8";
};
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 26ad6ab3c6af..e5c041ec0756 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -274,7 +274,7 @@
};
adc: adc@126c0000 {
- compatible = "samsung,exynos-adc-v1";
+ compatible = "samsung,exynos4212-adc";
reg = <0x126C0000 0x100>;
interrupt-parent = <&combiner>;
interrupts = <10 3>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index d5e66189ed2a..6dc96948a9cc 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -24,7 +24,8 @@
};
chosen {
- bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+ stdout-path = "serial2:115200n8";
};
vdd: fixed-regulator-vdd {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 80986b97dfe5..d5e0392b409e 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -157,6 +157,12 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <1 2>, <22 4>;
+ };
+
soc: soc {
sysram@2020000 {
compatible = "mmio-sram";
@@ -227,20 +233,6 @@
power-domains = <&pd_mau>;
};
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- /*
- * Unfortunately we need this since some versions
- * of U-Boot on Exynos don't set the CNTFRQ register,
- * so we need the value from DT.
- */
- clock-frequency = <24000000>;
- };
-
mct@101c0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
@@ -265,12 +257,6 @@
};
};
- pmu {
- compatible = "arm,cortex-a15-pmu";
- interrupt-parent = <&combiner>;
- interrupts = <1 2>, <22 4>;
- };
-
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
@@ -1097,6 +1083,20 @@
};
};
};
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ /*
+ * Unfortunately we need this since some versions
+ * of U-Boot on Exynos don't set the CNTFRQ register,
+ * so we need the value from DT.
+ */
+ clock-frequency = <24000000>;
+ };
};
&dp {
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index b1edb20b789e..17e2f3e0d71e 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -153,6 +153,14 @@
#gpio-cells = <2>;
interrupt-controller;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -161,6 +169,14 @@
#gpio-cells = <2>;
interrupt-controller;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index fa19c59b2fb6..36a2b77eeb9d 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "console=ttySAC2,115200";
+ stdout-path = "serial2:115200n8";
};
fin_pll: xxti {
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 55167850619c..3581b57fbbf7 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -17,6 +17,10 @@
#size-cells = <1>;
aliases {
+ i2c0 = &hsi2c_0;
+ i2c1 = &hsi2c_1;
+ i2c2 = &hsi2c_2;
+ i2c3 = &hsi2c_3;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
@@ -223,7 +227,7 @@
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -288,6 +292,14 @@
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
clock-names = "biu", "ciu";
+ assigned-clocks =
+ <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>,
+ <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>,
+ <&clock_top TOP_SCLK_MMC0>;
+ assigned-clock-parents =
+ <&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+ <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>;
+ assigned-clock-rates = <0>, <0>, <800000000>;
fifo-depth = <64>;
status = "disabled";
};
@@ -300,6 +312,14 @@
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
clock-names = "biu", "ciu";
+ assigned-clocks =
+ <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>,
+ <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>,
+ <&clock_top TOP_SCLK_MMC1>;
+ assigned-clock-parents =
+ <&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+ <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>;
+ assigned-clock-rates = <0>, <0>, <800000000>;
fifo-depth = <64>;
status = "disabled";
};
@@ -312,9 +332,69 @@
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
clock-names = "biu", "ciu";
+ assigned-clocks =
+ <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>,
+ <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>,
+ <&clock_top TOP_SCLK_MMC2>;
+ assigned-clock-parents =
+ <&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+ <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>;
+ assigned-clock-rates = <0>, <0>, <800000000>;
fifo-depth = <64>;
status = "disabled";
};
+
+ hsi2c_0: hsi2c@12da0000 {
+ compatible = "samsung,exynos5260-hsi2c";
+ reg = <0x12DA0000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_hs_bus>;
+ clocks = <&clock_peri PERI_CLK_HSIC0>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_1: hsi2c@12db0000 {
+ compatible = "samsung,exynos5260-hsi2c";
+ reg = <0x12DB0000 0x1000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_hs_bus>;
+ clocks = <&clock_peri PERI_CLK_HSIC1>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_2: hsi2c@12dc0000 {
+ compatible = "samsung,exynos5260-hsi2c";
+ reg = <0x12DC0000 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_hs_bus>;
+ clocks = <&clock_peri PERI_CLK_HSIC2>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_3: hsi2c@12dd0000 {
+ compatible = "samsung,exynos5260-hsi2c";
+ reg = <0x12DD0000 0x1000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_hs_bus>;
+ clocks = <&clock_peri PERI_CLK_HSIC3>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 434a7591ff63..8f9e08f940ab 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -38,8 +38,6 @@
fan0: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 0 20972 0>;
- cooling-min-state = <0>;
- cooling-max-state = <3>;
#cooling-cells = <2>;
cooling-levels = <0 130 170 230>;
};
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 8fc8c841d34b..dffa5e3ed90c 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "console=ttySAC2,115200";
+ stdout-path = "serial2:115200n8";
};
fin_pll: xxti {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 3447160e1fbf..dbf0306896f6 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -24,7 +24,7 @@
};
chosen {
- bootargs = "console=ttySAC3,115200";
+ stdout-path = "serial3:115200n8";
};
firmware@2073000 {
@@ -51,6 +51,15 @@
};
};
+&adc {
+ vdd-supply = <&ldo4_reg>;
+ status = "okay";
+};
+
+&cci {
+ status = "disabled";
+};
+
&cpu0 {
cpu-supply = <&buck2_reg>;
};
@@ -59,12 +68,268 @@
cpu-supply = <&buck6_reg>;
};
-&usbdrd_dwc3_1 {
- dr_mode = "host";
+&cpu0_thermal {
+ trips {
+ cpu0_alert0: cpu-alert-0 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu0_alert1: cpu-alert-1 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu0_alert2: cpu-alert-2 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu0_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * Reduce the CPU speed by 2 steps, down to: 1600 MHz
+ * and 1100 MHz.
+ */
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
+ };
+
+ /*
+ * Reduce the CPU speed down to 1200 MHz big (6 steps)
+ * and 800 MHz LITTLE (5 steps).
+ */
+ map1 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&cpu0 3 6>,
+ <&cpu1 3 6>,
+ <&cpu2 3 6>,
+ <&cpu3 3 6>,
+ <&cpu4 3 5>,
+ <&cpu5 3 5>,
+ <&cpu6 3 5>,
+ <&cpu7 3 5>;
+ };
+
+ /*
+ * Reduce the CPU speed as much as possible, down to 700 MHz
+ * big (11 steps) and 600 MHz LITTLE (7 steps).
+ */
+ map2 {
+ trip = <&cpu0_alert2>;
+ cooling-device = <&cpu0 6 11>,
+ <&cpu1 6 11>,
+ <&cpu2 6 11>,
+ <&cpu3 6 11>,
+ <&cpu4 5 7>,
+ <&cpu5 5 7>,
+ <&cpu6 5 7>,
+ <&cpu7 5 7>;
+ };
+ };
};
-&cci {
- status = "disabled";
+&cpu1_thermal {
+ trips {
+ cpu1_alert0: cpu-alert-0 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu1_alert1: cpu-alert-1 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu1_alert2: cpu-alert-2 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu1_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
+ };
+
+ map1 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&cpu0 3 6>,
+ <&cpu1 3 6>,
+ <&cpu2 3 6>,
+ <&cpu3 3 6>,
+ <&cpu4 3 5>,
+ <&cpu5 3 5>,
+ <&cpu6 3 5>,
+ <&cpu7 3 5>;
+ };
+
+ map2 {
+ trip = <&cpu1_alert2>;
+ cooling-device = <&cpu0 6 11>,
+ <&cpu1 6 11>,
+ <&cpu2 6 11>,
+ <&cpu3 6 11>,
+ <&cpu4 5 7>,
+ <&cpu5 5 7>,
+ <&cpu6 5 7>,
+ <&cpu7 5 7>;
+ };
+ };
+};
+
+&cpu2_thermal {
+ trips {
+ cpu2_alert0: cpu-alert-0 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu2_alert1: cpu-alert-1 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu2_alert2: cpu-alert-2 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu2_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
+ };
+
+ map1 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&cpu0 3 6>,
+ <&cpu1 3 6>,
+ <&cpu2 3 6>,
+ <&cpu3 3 6>,
+ <&cpu4 3 5>,
+ <&cpu5 3 5>,
+ <&cpu6 3 5>,
+ <&cpu7 3 5>;
+ };
+
+ map2 {
+ trip = <&cpu2_alert2>;
+ cooling-device = <&cpu0 6 11>,
+ <&cpu1 6 11>,
+ <&cpu2 6 11>,
+ <&cpu3 6 11>,
+ <&cpu4 6 7>,
+ <&cpu5 6 7>,
+ <&cpu6 6 7>,
+ <&cpu7 6 7>;
+ };
+ };
+};
+
+&cpu3_thermal {
+ trips {
+ cpu3_alert0: cpu-alert-0 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu3_alert1: cpu-alert-1 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu3_alert2: cpu-alert-2 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu3_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
+ };
+
+ map1 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&cpu0 3 6>,
+ <&cpu1 3 6>,
+ <&cpu2 3 6>,
+ <&cpu3 3 6>,
+ <&cpu4 3 5>,
+ <&cpu5 3 5>,
+ <&cpu6 3 5>,
+ <&cpu7 3 5>;
+ };
+
+ map2 {
+ trip = <&cpu3_alert2>;
+ cooling-device = <&cpu0 6 11>,
+ <&cpu1 6 11>,
+ <&cpu2 6 11>,
+ <&cpu3 6 11>,
+ <&cpu4 5 7>,
+ <&cpu5 5 7>,
+ <&cpu6 5 7>,
+ <&cpu7 5 7>;
+ };
+ };
};
&hdmi {
@@ -107,12 +372,19 @@
regulator-name = "PVDD_APIO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "PVDD_APIO_MMCON_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ /*
+ * Must be always on, even though there is
+ * a consumer (mmc_0). Otherwise the board
+ * does not reboot with vendor U-Boot
+ * (Linaro for Arndale Octa, v2012.07).
+ */
regulator-always-on;
};
@@ -145,6 +417,7 @@
regulator-name = "PVDD_ABB_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo9_reg: LDO9 {
@@ -176,10 +449,17 @@
ldo13_reg: LDO13 {
regulator-name = "PVDD_APIO_MMCOFF_2V8";
- regulator-min-microvolt = <2800000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
};
+ ldo14_reg: LDO14 {
+ /* Unused */
+ regulator-name = "PVDD_LDO14";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo15_reg: LDO15 {
regulator-name = "PVDD_PERI_2V8";
regulator-min-microvolt = <3300000>;
@@ -192,6 +472,13 @@
regulator-max-microvolt = <2200000>;
};
+ ldo17_reg: LDO17 {
+ /* Unused */
+ regulator-name = "PVDD_LDO17";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo18_reg: LDO18 {
regulator-name = "PVDD_EMMC_1V8";
regulator-min-microvolt = <1800000>;
@@ -216,10 +503,17 @@
regulator-max-microvolt = <1800000>;
};
+ ldo22_reg: LDO22 {
+ /* Unused */
+ regulator-name = "PVDD_LDO22";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
+ };
+
ldo23_reg: LDO23 {
regulator-name = "PVDD_MIFS_1V1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
regulator-always-on;
};
@@ -229,6 +523,13 @@
regulator-max-microvolt = <2800000>;
};
+ ldo25_reg: LDO25 {
+ /* Unused */
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo26_reg: LDO26 {
regulator-name = "PVDD_CAM0_AF_2V8";
regulator-min-microvolt = <3000000>;
@@ -237,8 +538,8 @@
ldo27_reg: LDO27 {
regulator-name = "PVDD_G3DS_1V0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
};
ldo28_reg: LDO28 {
@@ -253,6 +554,13 @@
regulator-max-microvolt = <1800000>;
};
+ ldo30_reg: LDO30 {
+ /* Unused */
+ regulator-name = "PVDD_LDO30";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo31_reg: LDO31 {
regulator-name = "PVDD_PERI_1V8";
regulator-min-microvolt = <1800000>;
@@ -271,12 +579,33 @@
regulator-max-microvolt = <1800000>;
};
+ ldo34_reg: LDO34 {
+ /* Unused */
+ regulator-name = "PVDD_LDO34";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo35_reg: LDO35 {
regulator-name = "PVDD_CAM0_DVDD_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+ ldo36_reg: LDO36 {
+ /* Unused */
+ regulator-name = "PVDD_LDO36";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo37_reg: LDO37 {
+ /* Unused */
+ regulator-name = "PVDD_LDO37";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo38_reg: LDO38 {
regulator-name = "PVDD_CAM0_AVDD_2V8";
regulator-min-microvolt = <2800000>;
@@ -364,7 +693,7 @@
&mmc_0 {
status = "okay";
- broken-cd;
+ non-removable;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
@@ -372,22 +701,27 @@
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
vmmc-supply = <&ldo10_reg>;
+ vqmmc-supply = <&ldo3_reg>;
bus-width = <8>;
cap-mmc-highspeed;
+ mmc-hs200-1_8v;
};
&mmc_2 {
status = "okay";
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
vmmc-supply = <&ldo19_reg>;
vqmmc-supply = <&ldo13_reg>;
bus-width = <4>;
cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
};
&pinctrl_0 {
@@ -404,3 +738,7 @@
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 3cf905047893..8240e5186972 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -21,7 +21,8 @@
};
chosen {
- bootargs = "console=ttySAC2,115200 init=/linuxrc";
+ bootargs = "init=/linuxrc";
+ stdout-path = "serial2:115200n8";
};
fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index aaff15880761..5fb2326875dc 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -5,7 +5,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
+ * SAMSUNG EXYNOS5420 SoC device nodes are listed in this file.
* EXYNOS5420 based board files can include this file and provide
* values for board specfic bindings.
*/
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
index 51a843bd65ed..c3c2d85267da 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -22,11 +22,12 @@
"Headphone Jack", "HPL",
"Headphone Jack", "HPR",
"Headphone Jack", "MICBIAS",
- "IN1", "Headphone Jack",
+ "IN12", "Headphone Jack",
"Speakers", "SPKL",
"Speakers", "SPKR",
"I2S Playback", "Mixer DAI TX",
- "HiFi Playback", "Mixer DAI TX";
+ "HiFi Playback", "Mixer DAI TX",
+ "Mixer DAI RX", "HiFi Capture";
assigned-clocks = <&clock CLK_MOUT_EPLL>,
<&clock CLK_MOUT_MAU_EPLL>,
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 5f195ad7e467..93a48f2dda49 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -44,8 +44,6 @@
fan0: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 0 20972 0>;
- cooling-min-state = <0>;
- cooling-max-state = <3>;
#cooling-cells = <2>;
cooling-levels = <0 130 170 230>;
};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index de26e5ee0d2d..ae866bcc30c4 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -25,27 +25,27 @@
usbdrdphy1 = &usbdrd_phy1;
};
- soc: soc {
- arm_a7_pmu: arm-a7-pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
+ arm_a7_pmu: arm-a7-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
- arm_a15_pmu: arm-a15-pmu {
- compatible = "arm,cortex-a15-pmu";
- interrupt-parent = <&combiner>;
- interrupts = <1 2>,
- <7 0>,
- <16 6>,
- <19 2>;
- status = "disabled";
- };
+ arm_a15_pmu: arm-a15-pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <1 2>,
+ <7 0>,
+ <16 6>,
+ <19 2>;
+ status = "disabled";
+ };
+ soc: soc {
sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x54000>;
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index 592111c8d6fd..cfbfbc91a1e1 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -267,44 +267,50 @@
/* 32MB of flash */
reg = <0x30000000 0x02000000>;
- /*
- * This "RedBoot" is the Storlink derivative.
- */
- partition@0 {
- label = "RedBoot";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- /*
- * This firmware image contains the kernel catenated
- * with the squashfs root filesystem. For some reason
- * this is called "upgrade" on the vendor system.
- */
- partition@40000 {
- label = "upgrade";
- reg = <0x00040000 0x01f40000>;
- read-only;
- };
- /* RGDB, Residental Gateway Database? */
- partition@1f80000 {
- label = "rgdb";
- reg = <0x01f80000 0x00040000>;
- read-only;
- };
- /*
- * This partition contains MAC addresses for WAN,
- * WLAN and LAN, and the country code (for wireless
- * I guess).
- */
- partition@1fc0000 {
- label = "nvram";
- reg = <0x01fc0000 0x00020000>;
- read-only;
- };
- partition@1fe0000 {
- label = "LangPack";
- reg = <0x01fe0000 0x00020000>;
- read-only;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * This "RedBoot" is the Storlink derivative.
+ */
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ /*
+ * This firmware image contains the kernel catenated
+ * with the squashfs root filesystem. For some reason
+ * this is called "upgrade" on the vendor system.
+ */
+ partition@40000 {
+ label = "upgrade";
+ reg = <0x00040000 0x01f40000>;
+ read-only;
+ };
+ /* RGDB, Residental Gateway Database? */
+ partition@1f80000 {
+ label = "rgdb";
+ reg = <0x01f80000 0x00040000>;
+ read-only;
+ };
+ /*
+ * This partition contains MAC addresses for WAN,
+ * WLAN and LAN, and the country code (for wireless
+ * I guess).
+ */
+ partition@1fc0000 {
+ label = "nvram";
+ reg = <0x01fc0000 0x00020000>;
+ read-only;
+ };
+ partition@1fe0000 {
+ label = "LangPack";
+ reg = <0x01fe0000 0x00020000>;
+ read-only;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 59cadeee23ed..9cbdc1a15cda 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -21,6 +21,12 @@
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ mmc0 = &esdhc1;
+ mmc1 = &esdhc2;
+ mmc2 = &esdhc3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
new file mode 100644
index 000000000000..a0eaf869b913
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 Jonathan Neuschäfer
+//
+// The Kobo Aura e-book reader, model N514. The mainboard is marked as E606F0B.
+
+/dts-v1/;
+#include "imx50.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Kobo Aura (N514)";
+ compatible = "kobo,aura", "fsl,imx50";
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory@70000000 {
+ device_type = "memory";
+ reg = <0x70000000 0x10000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ on {
+ label = "kobo_aura:orange:on";
+ gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ hallsensor {
+ label = "Hallsensor";
+ gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESERVED>;
+ linux,input-type = <EV_SW>;
+ };
+
+ frontlight {
+ label = "Frontlight";
+ gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DISPLAYTOGGLE>;
+ };
+ };
+
+ sd2_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd2_reset>;
+ reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+ };
+
+ sd2_vmmc: gpio-regulator {
+ compatible = "regulator-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd2_vmmc>;
+ regulator-name = "vmmc";
+ states = <3300000 0>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <100000>;
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ status = "okay";
+
+ /* External µSD card */
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd2>;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ disable-wp;
+ mmc-pwrseq = <&sd2_pwrseq>;
+ vmmc-supply = <&sd2_vmmc>;
+ status = "okay";
+
+ /* CyberTan WC121 SDIO WiFi (BCM43362) */
+};
+
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd3>;
+ bus-width = <8>;
+ non-removable;
+ max-frequency = <50000000>;
+ disable-wp;
+ status = "okay";
+
+ /* Internal eMMC */
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ /* TODO: ektf2132 touch controller at 0x15 */
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ /* TODO: TPS65185 PMIC for E Ink at 0x68 */
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ /* TODO: embedded controller at 0x43 */
+};
+
+&iomuxc {
+ pinctrl_gpiokeys: gpiokeys {
+ fsl,pins = <
+ MX50_PAD_CSPI_MISO__GPIO4_10 0x0
+ MX50_PAD_SD2_D7__GPIO5_15 0x0
+ MX50_PAD_KEY_ROW0__GPIO4_1 0x0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1 {
+ fsl,pins = <
+ MX50_PAD_I2C1_SCL__I2C1_SCL 0x400001fd
+ MX50_PAD_I2C1_SDA__I2C1_SDA 0x400001fd
+ >;
+ };
+
+ pinctrl_i2c2: i2c2 {
+ fsl,pins = <
+ MX50_PAD_I2C2_SCL__I2C2_SCL 0x400001fd
+ MX50_PAD_I2C2_SDA__I2C2_SDA 0x400001fd
+ >;
+ };
+
+ pinctrl_i2c3: i2c3 {
+ fsl,pins = <
+ MX50_PAD_I2C3_SCL__I2C3_SCL 0x400001fd
+ MX50_PAD_I2C3_SDA__I2C3_SDA 0x400001fd
+ >;
+ };
+
+ pinctrl_leds: leds {
+ fsl,pins = <
+ MX50_PAD_PWM1__GPIO6_24 0x0
+ >;
+ };
+
+ pinctrl_sd1: sd1 {
+ fsl,pins = <
+ MX50_PAD_SD1_CMD__ESDHC1_CMD 0x1e4
+ MX50_PAD_SD1_CLK__ESDHC1_CLK 0xd4
+ MX50_PAD_SD1_D0__ESDHC1_DAT0 0x1d4
+ MX50_PAD_SD1_D1__ESDHC1_DAT1 0x1d4
+ MX50_PAD_SD1_D2__ESDHC1_DAT2 0x1d4
+ MX50_PAD_SD1_D3__ESDHC1_DAT3 0x1d4
+
+ MX50_PAD_SD2_CD__GPIO5_17 0x0
+ >;
+ };
+
+ pinctrl_sd2: sd2 {
+ fsl,pins = <
+ MX50_PAD_SD2_CMD__ESDHC2_CMD 0x1e4
+ MX50_PAD_SD2_CLK__ESDHC2_CLK 0xd4
+ MX50_PAD_SD2_D0__ESDHC2_DAT0 0x1d4
+ MX50_PAD_SD2_D1__ESDHC2_DAT1 0x1d4
+ MX50_PAD_SD2_D2__ESDHC2_DAT2 0x1d4
+ MX50_PAD_SD2_D3__ESDHC2_DAT3 0x1d4
+ >;
+ };
+
+ pinctrl_sd2_reset: sd2-reset {
+ fsl,pins = <
+ MX50_PAD_ECSPI2_MOSI__GPIO4_17 0x0
+ >;
+ };
+
+ pinctrl_sd2_vmmc: sd2-vmmc {
+ fsl,pins = <
+ MX50_PAD_ECSPI1_SCLK__GPIO4_12 0x0
+ >;
+ };
+
+ pinctrl_sd3: sd3 {
+ fsl,pins = <
+ MX50_PAD_SD3_CMD__ESDHC3_CMD 0x1e4
+ MX50_PAD_SD3_CLK__ESDHC3_CLK 0xd4
+ MX50_PAD_SD3_D0__ESDHC3_DAT0 0x1d4
+ MX50_PAD_SD3_D1__ESDHC3_DAT1 0x1d4
+ MX50_PAD_SD3_D2__ESDHC3_DAT2 0x1d4
+ MX50_PAD_SD3_D3__ESDHC3_DAT3 0x1d4
+ MX50_PAD_SD3_D4__ESDHC3_DAT4 0x1d4
+ MX50_PAD_SD3_D5__ESDHC3_DAT5 0x1d4
+ MX50_PAD_SD3_D6__ESDHC3_DAT6 0x1d4
+ MX50_PAD_SD3_D7__ESDHC3_DAT7 0x1d4
+ >;
+ };
+
+ pinctrl_uart2: uart2 {
+ fsl,pins = <
+ MX50_PAD_UART2_TXD__UART2_TXD_MUX 0x1e4
+ MX50_PAD_UART2_RXD__UART2_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_usbphy: usbphy {
+ fsl,pins = <
+ MX50_PAD_ECSPI2_SS0__GPIO4_19 0x0
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg {
+ phy_type = "utmi_wide";
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbphy>;
+ vbus-detect-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index ee1e3e8bf4ec..0bfe7c91d0eb 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -26,11 +26,21 @@
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ mmc0 = &esdhc1;
+ mmc1 = &esdhc2;
+ mmc2 = &esdhc3;
+ mmc3 = &esdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &cspi;
};
cpus {
@@ -76,6 +86,14 @@
};
};
+ usbphy0: usbphy-0 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ status = "okay";
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -187,7 +205,8 @@
compatible = "fsl,imx50-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
- clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ fsl,usbphy = <&usbphy0>;
status = "disabled";
};
@@ -411,7 +430,7 @@
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>,
- <&clks IMX5_CLK_SDMA_GATE>;
+ <&clks IMX5_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index a8220f08dcbf..3596060f52e7 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2017 Zodiac Inflight Innovations
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index a5ee25cedc10..0a4b9a5d9a9c 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -489,7 +489,7 @@
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>,
- <&clks IMX5_CLK_SDMA_GATE>;
+ <&clks IMX5_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
index db2e5bce9b6a..d1770e1d5e50 100644
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@@ -52,7 +52,7 @@
clock-frequency = <400000>;
status = "okay";
- stmpe610@41 {
+ touchscreen@41 {
compatible = "st,stmpe610";
reg = <0x41>;
id = <0>;
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
new file mode 100644
index 000000000000..f0a3fde0739c
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+ model = "MENLO M53 EMBEDDED DEVICE";
+ compatible = "menlo,m53menlo", "fsl,imx53";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user1 {
+ label = "TestLed601";
+ gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user2 {
+ label = "TestLed602";
+ gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ eth {
+ label = "EthLedYe";
+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+ };
+
+ panel {
+ compatible = "edt,etm070080dh6";
+ enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ reg_usbh1_vbus: regulator-usbh1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+ <&clks IMX5_CLK_CKO1_PODF>,
+ <&clks IMX5_CLK_CKO1>;
+ assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+ assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_edt_ft5x06>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ dac@60 {
+ compatible = "microchip,mcp4725";
+ reg = <0x60>;
+ };
+};
+
+&i2c2 {
+ touchscreen@41 {
+ status = "disabled";
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-m53evk {
+ hoggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
+ MX53_PAD_EIM_EB3__GPIO2_31 0x1d5
+ MX53_PAD_PATA_DA_0__GPIO7_6 0x1d5
+ MX53_PAD_GPIO_19__CCM_CLKO 0x1d5
+ MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x1d5
+ MX53_PAD_CSI0_DAT4__GPIO5_22 0x1d5
+ MX53_PAD_CSI0_DAT5__GPIO5_23 0x1d5
+ MX53_PAD_CSI0_DAT6__GPIO5_24 0x1d5
+ MX53_PAD_CSI0_DAT7__GPIO5_25 0x1d5
+ MX53_PAD_CSI0_DAT8__GPIO5_26 0x1d5
+ MX53_PAD_CSI0_DAT9__GPIO5_27 0x1d5
+ MX53_PAD_CSI0_DAT10__GPIO5_28 0x1d5
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x1d5
+ MX53_PAD_CSI0_DAT14__GPIO6_0 0x1d5
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT15__GPIO6_1 0x1d5
+ MX53_PAD_CSI0_DAT16__GPIO6_2 0x1d5
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_7__CAN1_TXCAN 0x1c4
+ MX53_PAD_GPIO_8__CAN1_RXCAN 0x1c4
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1c4
+ MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4
+ >;
+ };
+
+ pinctrl_display_gpio: display-gpiogrp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT12__GPIO5_30 0x1d5 /* Reset */
+ MX53_PAD_CSI0_DAT13__GPIO5_31 0x1d5 /* Interrupt */
+ >;
+ };
+
+ pinctrl_edt_ft5x06: edt-ft5x06grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA9__GPIO2_9 0x1d5 /* Reset */
+ MX53_PAD_CSI0_DAT19__GPIO6_5 0x1d5 /* Interrupt */
+ MX53_PAD_PATA_DATA10__GPIO2_10 0x1d5 /* Wake */
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x4
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4
+ MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4
+ MX53_PAD_GPIO_5__I2C3_SCL 0x400001e4
+ >;
+ };
+
+ pinctrl_lvds0: lvds0grp {
+ /* LVDS pins only have pin mux configuration */
+ fsl,pins = <
+ MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+ MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+ MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+ MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+ MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_usb: usbgrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_2__GPIO1_2 0x1d5
+ MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5
+ >;
+ };
+ };
+};
+
+&ldb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds0>;
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ reg = <0>;
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@2 {
+ reg = <2>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb>;
+ vbus-supply = <&reg_usbh1_vbus>;
+ phy_type = "utmi";
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index b3300300aabe..9b672ed2486d 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -702,7 +702,7 @@
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>,
- <&clks IMX5_CLK_SDMA_GATE>;
+ <&clks IMX5_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index c40a7af6ebee..2a6ce87071f9 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -249,9 +249,9 @@
gpio-cfg = <
0x0000 /* 0:Default */
0x0000 /* 1:Default */
- 0x0013 /* 2:FN_DMICCLK */
+ 0x0000 /* 2:FN_DMICCLK */
0x0000 /* 3:Default */
- 0x8014 /* 4:FN_DMICCDAT */
+ 0x0000 /* 4:FN_DMICCDAT */
0x0000 /* 5:Default */
>;
};
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
new file mode 100644
index 000000000000..9eb2b73951b2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Eckelmann AG.
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx6dl.dtsi"
+
+/ {
+ model = "Eckelmann CI 4X10 Board";
+ compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+
+ rmii_clk: clock-rmii {
+ /* This clock is provided by the phy (KSZ8091RNB) */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ siox {
+ compatible = "eckelmann,siox-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_siox>;
+ din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+ dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+ dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "everspin,mr25h256";
+ reg = <0>;
+ spi-max-frequency = <15000000>;
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&gpio2 {
+ gpio-line-names = "buzzer", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "", "", "", "", "in2",
+ "prio2", "prio1", "aux", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "in1",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ temperature-sensor@49 {
+ compatible = "ad,ad7414";
+ reg = <0x49>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf2127";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hog {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x00000018 /* OUT_2 */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x00000018 /* OUT_3 */
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x00000000 /* In1 */
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x00000000 /* In2 */
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x00000018 /* unused watchdog pin */
+ MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x00000018 /* unused watchdog pin */
+
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x000100a0
+ MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x000100a0
+ MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x000100a0
+ MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000100a0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x000100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x000100b1
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x000100b1
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x0001b098
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x0001b098
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x0001b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x0001b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x0001b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x0001b0b0
+ MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x00000018
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x0001b020
+ MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x0001b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x0001b020
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x0001b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ /* without SION i2c doesn't detect bus busy */
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b820
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b820
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x00000018
+ >;
+ };
+
+ pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0
+ >;
+ };
+
+ pinctrl_siox: sioxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x0001b010 /* DIN */
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */
+ MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0001b010 /* DCLK */
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x0001b010 /* DLD */
+ >;
+ };
+
+ pinctrl_uart1_dte: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x0001b010
+ MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x0001b010
+ MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x0001b010
+ MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0001b010
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0001b010 /* DTR */
+ MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */
+ >;
+ };
+
+ pinctrl_uart2_dte: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0001b010
+ MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0001b010
+ MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0001b010
+ MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0001b010
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b010 /* DTR */
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */
+ >;
+ };
+
+ pinctrl_uart3_dce: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x0001b010
+ MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x0001b010
+ >;
+ };
+
+ pinctrl_uart4_dce: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x0001b010
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x0001b010
+ MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x0001b010
+ >;
+ };
+
+ pinctrl_uart5_dce: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x0001b010
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x0001b010
+ MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x0001b010 /* RTS */
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0001b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x00017059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x00010059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x00017059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x00017059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x00017059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x00017059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x00017059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x00017059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x00017059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x00017059
+ >;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+ phy-handle = <&phy>;
+ clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_dte>;
+ uart-has-rtscts;
+ fsl,dte-mode;
+ dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_dte>;
+ uart-has-rtscts;
+ fsl,dte-mode;
+ dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_dce>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_dce>;
+ rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5_dce>;
+ rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ vbus-supply = <&reg_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
index 660d52a245ba..ff3283c83a39 100644
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts
@@ -11,3 +11,18 @@
model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
};
+
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 996000 1275000
+ 792000 1175000
+ 396000 1150000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1200000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
index 56e5b5050fcf..cb0a5f7d5a19 100644
--- a/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -12,10 +12,30 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-gw54xx.dtsi"
+#include <dt-bindings/media/tda1997x.h>
/ {
model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
+
+ sound-digital {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tda1997x-audio";
+
+ simple-audio-card,dai-link@0 {
+ format = "i2s";
+
+ cpu {
+ sound-dai = <&ssi2>;
+ };
+
+ codec {
+ bitclock-master;
+ frame-master;
+ sound-dai = <&hdmi_receiver>;
+ };
+ };
+ };
};
&i2c3 {
@@ -35,6 +55,61 @@
};
};
};
+
+ hdmi_receiver: hdmi-receiver@48 {
+ compatible = "nxp,tda19971";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tda1997x>;
+ reg = <0x48>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ DOVDD-supply = <&reg_3p3v>;
+ AVDD-supply = <&sw4_reg>;
+ DVDD-supply = <&sw4_reg>;
+ #sound-dai-cells = <0>;
+ nxp,audout-format = "i2s";
+ nxp,audout-layout = <0>;
+ nxp,audout-width = <16>;
+ nxp,audout-mclk-fs = <128>;
+ /*
+ * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+ * and Y[11:4] across 16bits in the same cycle
+ * which we map to VP[15:08]<->CSI_DATA[19:12]
+ */
+ nxp,vidout-portcfg =
+ /*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+ < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+ /*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+ < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+ /*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+ < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+ /*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+ < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+ port {
+ tda1997x_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ bus-width = <16>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ data-active = <1>;
+ };
+ };
+ };
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+ bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+ bus-width = <16>;
+};
+
+&ipu1_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
};
&ipu2_csi1_from_ipu2_csi1_mux {
@@ -63,6 +138,30 @@
>;
};
+ pinctrl_ipu1_csi0: ipu1_csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
+ >;
+ };
+
pinctrl_ipu2_csi1: ipu2_csi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0
@@ -78,4 +177,10 @@
MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0
>;
};
+
+ pinctrl_tda1997x: tda1997xgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
+ >;
+ };
};
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
index 45eb0b7f75f8..d96ae54be338 100644
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -21,6 +21,8 @@
panel-lvds0 {
compatible = "okaya,rs800480t-7x0gp";
+ power-supply = <&reg_lcd_reset>;
+ backlight = <&backlight>;
port {
panel_in_lvds0: endpoint {
@@ -38,7 +40,6 @@
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-always-on;
vin-supply = <&reg_3v3>;
startup-delay-us = <500000>;
};
@@ -52,7 +53,6 @@
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-always-on;
vin-supply = <&reg_lcd>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
index 0f0743db2779..a1c5e69d81ba 100644
--- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts
+++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2016-2017 Zodiac Inflight Innovations
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
index 397e205551c4..70d26616d771 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -77,8 +77,6 @@
pwm_fan: pwm-fan {
compatible = "pwm-fan";
- cooling-min-state = <0>;
- cooling-max-state = <4>;
#cooling-cells = <2>;
pwms = <&pwm4 0 50000>;
cooling-levels = <0 64 127 191 255>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 81b2fcf6eedf..e4d1c5250d1e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -115,12 +116,12 @@
};
};
- sound {
+ sound-analog {
compatible = "fsl,imx6q-ventana-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "sgtl5000-audio";
ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
+ audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
@@ -134,6 +135,25 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
status = "okay";
+
+ ssi2 {
+ fsl,audmux-port = <1>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+ IMX_AUDMUX_V2_PTCR_SYN)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+ >;
+ };
+
+ aud5 {
+ fsl,audmux-port = <4>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
+ };
};
&can1 {
@@ -332,7 +352,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- codec: sgtl5000@a {
+ sgtl5000: audio-codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
@@ -476,6 +496,9 @@
MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
+ MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+ MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x130b0
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 8e46a80f57a4..c23ba229fd05 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -46,6 +46,8 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -99,6 +101,50 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ sound-digital {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tda1997x-audio";
+
+ simple-audio-card,dai-link@0 {
+ format = "i2s";
+
+ cpu {
+ sound-dai = <&ssi2>;
+ };
+
+ codec {
+ bitclock-master;
+ frame-master;
+ sound-dai = <&hdmi_receiver>;
+ };
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
+ status = "okay";
+
+ ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+ IMX_AUDMUX_V2_PTCR_SYN)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+ >;
+ };
+
+ aud5 {
+ fsl,audmux-port = <4>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(0)>;
+ };
};
&can1 {
@@ -264,6 +310,60 @@
#gpio-cells = <2>;
};
+ hdmi_receiver: hdmi-receiver@48 {
+ compatible = "nxp,tda19971";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tda1997x>;
+ reg = <0x48>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ DOVDD-supply = <&reg_3p3>;
+ AVDD-supply = <&reg_1p8b>;
+ DVDD-supply = <&reg_1p8a>;
+ #sound-dai-cells = <0>;
+ nxp,audout-format = "i2s";
+ nxp,audout-layout = <0>;
+ nxp,audout-width = <16>;
+ nxp,audout-mclk-fs = <128>;
+ /*
+ * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+ * and Y[11:4] across 16bits in the same cycle
+ * which we map to VP[15:08]<->CSI_DATA[19:12]
+ */
+ nxp,vidout-portcfg =
+ /*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+ < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+ /*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+ < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+ /*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+ < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+ /*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+ < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+ port {
+ tda1997x_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ bus-width = <16>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ data-active = <1>;
+ };
+ };
+ };
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+ bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+ bus-width = <16>;
+};
+
+&ipu1_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
};
&pcie {
@@ -321,6 +421,14 @@
};
&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+ MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x130b0
+ >;
+ };
+
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
@@ -376,6 +484,30 @@
>;
};
+ pinctrl_ipu1_csi0: ipu1_csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
+ >;
+ };
+
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
@@ -400,6 +532,12 @@
>;
};
+ pinctrl_tda1997x: tda1997xgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index 9cb9a7439121..aee9221f0f29 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -311,7 +311,7 @@
tlv320aic3105: codec@18 {
compatible = "ti,tlv320aic3x";
reg = <0x18>;
- gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
clocks = <&clks IMX6QDL_CLK_CKO>;
ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
/* Regulators */
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 027df06c5dc7..7e53ac6cfa8a 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -79,7 +79,7 @@
status = "okay";
cs-gpios = <&gpio4 24 0>;
- flash@0 {
+ som_flash: flash@0 {
compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
@@ -121,7 +121,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- eeprom@50 {
+ som_eeprom: eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
index 8752a4961c47..c41cac502bac 100644
--- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
@@ -183,7 +183,7 @@
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&reg_3p3v>;
ai3x-ocmv = <0>;
- gpio-reset = <&gpio5 5 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 69942c7ff89d..93be00a60c88 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2016-2017 Zodiac Inflight Innovations
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
@@ -210,6 +174,7 @@
panel {
power-supply = <&reg_3p3v_display>;
+ backlight = <&sp_backlight>;
status = "disabled";
port {
@@ -327,7 +292,7 @@
compatible = "zii,rave-sp-watchdog";
};
- backlight {
+ sp_backlight: backlight {
compatible = "zii,rave-sp-backlight";
};
@@ -384,7 +349,7 @@
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
accel@1c {
@@ -528,6 +493,11 @@
};
};
+ watchdog@38 {
+ compatible = "zii,rave-wdt";
+ reg = <0x38>;
+ };
+
temp-sense@48 {
compatible = "national,lm75";
reg = <0x48>;
@@ -572,7 +542,7 @@
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
touchscreen@20 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index fe17a3405edc..b3a77bcf00d5 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -4,6 +4,7 @@
// Copyright 2011 Linaro Ltd.
#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
@@ -279,6 +280,7 @@
ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
+ num-viewport = <4>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
@@ -833,6 +835,14 @@
status = "disabled";
};
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ };
+
snvs_lpgpr: snvs-lpgpr {
compatible = "fsl,imx6q-snvs-lpgpr";
};
@@ -918,7 +928,7 @@
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_SDMA>,
+ clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
@@ -1129,14 +1139,16 @@
reg = <0x021ac000 0x4000>;
};
- mmdc0: mmdc@21b0000 { /* MMDC0 */
+ mmdc0: memory-controller@21b0000 { /* MMDC0 */
compatible = "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
};
- mmdc1: mmdc@21b4000 { /* MMDC1 */
+ mmdc1: memory-controller@21b4000 { /* MMDC1 */
+ compatible = "fsl,imx6q-mmdc";
reg = <0x021b4000 0x4000>;
+ status = "disabled";
};
weim: weim@21b8000 {
diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
index 98bf7a6b2850..57de447c4609 100644
--- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
+++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2016-2017 Zodiac Inflight Innovations
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 4b4813f176cd..9ddbeea64b72 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -23,6 +23,13 @@
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ mmc3 = &usdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -741,7 +748,7 @@
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SDMA>,
- <&clks IMX6SL_CLK_SDMA>;
+ <&clks IMX6SL_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
/* imx6sl reuses imx6q sdma firmware */
@@ -922,7 +929,7 @@
status = "disabled";
};
- mmdc: mmdc@21b0000 {
+ memory-controller@21b0000 {
compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>;
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 62847c68330b..1b4899f0fcde 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -64,6 +64,7 @@
198000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6SLL_CLK_ARM>,
<&clks IMX6SLL_CLK_PLL2_PFD2>,
<&clks IMX6SLL_CLK_STEP>,
@@ -621,7 +622,7 @@
compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_SDMA>,
+ clocks = <&clks IMX6SLL_CLK_IPG>,
<&clks IMX6SLL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 5b16e65f7696..b16a123990a2 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -820,7 +820,7 @@
compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_SDMA>,
+ clocks = <&clks IMX6SX_CLK_IPG>,
<&clks IMX6SX_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
@@ -1017,7 +1017,7 @@
status = "disabled";
};
- mmdc: mmdc@21b0000 {
+ memory-controller@21b0000 {
compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 62ed30c781ed..bbf010c73336 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -708,7 +708,7 @@
"fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SDMA>,
+ clocks = <&clks IMX6UL_CLK_IPG>,
<&clks IMX6UL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
@@ -914,7 +914,7 @@
status = "disabled";
};
- mmdc: mmdc@21b0000 {
+ memory-controller@21b0000 {
compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
new file mode 100644
index 000000000000..50abf18ad30b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ Systems MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ *
+ * Note: This file does not include nodes for all peripheral devices.
+ * As device driver coverage increases additional nodes can be added.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ chosen {
+ stdout-path = &uart6;
+ };
+
+ gpio_buttons: gpio-keys {
+ compatible = "gpio-keys";
+
+ button-0 {
+ /* #SWITCH_A */
+ label = "S11";
+ linux,code = <KEY_1>;
+ gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
+ };
+
+ button-1 {
+ /* #SWITCH_B */
+ label = "S12";
+ linux,code = <KEY_2>;
+ gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
+ };
+
+ button-2 {
+ /* #SWITCH_C */
+ label = "S13";
+ linux,code = <KEY_3>;
+ gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_SD1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_fec1_pwdn: regulator-fec1-pwdn {
+ compatible = "regulator-fixed";
+ regulator-name = "PWDN_FEC1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_fec2_pwdn: regulator-fec2-pwdn {
+ compatible = "regulator-fixed";
+ regulator-name = "PWDN_FEC2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VBUS_USBOTG1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VBUS_USBOTG2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_mpcie_1v5: regulator-mpcie-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V5_MPCIE";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_mpcie_3v3: regulator-mpcie-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_MPCIE";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_mba_12v0: regulator-mba-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC12V0_MBA7";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lvds_transmitter: regulator-lvds-transmitter {
+ compatible = "regulator-fixed";
+ regulator-name = "#SHTDN_LVDS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vref_1v8: regulator-vref-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8_REF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&sw2_reg>;
+ };
+
+ reg_audio_3v3: regulator-audio-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_AUDIO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&adc1 {
+ vref-supply = <&reg_vref_1v8>;
+ status = "okay";
+};
+
+&adc2 {
+ vref-supply = <&reg_vref_1v8>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ num-chipselects = <3>;
+ cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
+ <&gpio4 2 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ num-chipselects = <1>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii-id";
+ phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
+ phy-reset-delay = <1>;
+ phy-supply = <&reg_fec1_pwdn>;
+ phy-handle = <&ethphy1_0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1_0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ /* LED1: Link/Activity, LED2: Error */
+ ti,led-function = <0x0db0>;
+ /* Active low, LED1 and LED2 driven by phy */
+ ti,led-ctrl = <0x1001>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&i2c1 {
+ lm75: temperature-sensor@49 {
+ compatible = "national,lm75";
+ reg = <0x49>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ tlv320aic32x4: audio-codec@18 {
+ compatible = "ti,tlv320aic32x4";
+ reg = <0x18>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clock-names = "mclk";
+ ldoin-supply = <&reg_audio_3v3>;
+ iov-supply = <&reg_audio_3v3>;
+ };
+
+ pca9555: gpio-expander@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9555>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_mba7_1>;
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x7c
+ MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x74
+ MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x74
+ MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x74
+ MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x74
+ MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x74
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c
+ MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74
+ MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74
+ MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x74
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x02
+ MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x00
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x79
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x79
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x79
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79
+ /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+ MX7D_PAD_ENET1_COL__GPIO7_IO15 0x40000070
+ /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+ MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x40000078
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x5a
+ MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x52
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x5a
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x52
+ >;
+ };
+
+ pinctrl_hog_mba7_1: hogmba71grp {
+ fsl,pins = <
+ /* Limitation: WDOG2_B / WDOG2_RESET not usable */
+ MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x4000007c
+ MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x40000074
+ /* #BOOT_EN */
+ MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x40000010
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000078
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000078
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x40000078
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x40000078
+ >;
+ };
+
+
+ pinctrl_pca9555: pca95550grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x78
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x7e
+ MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x76
+ MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x76
+ MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x7e
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e
+ MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76
+ MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x76
+ MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x7e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x7e
+ MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x76
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d
+ MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75
+ MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x75
+ MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x7d
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x7e
+ MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x76
+ MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x76
+ /* Limitation: RTS is not connected */
+ MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x7e
+ >;
+ };
+
+ pinctrl_usdhc1_gpio: usdhc1grp_gpio {
+ fsl,pins = <
+ /* WP */
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x7c
+ /* CD */
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x7c
+ /* VSELECT */
+ MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5e
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x57
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5e
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x57
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x57
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ /* LCD_CONTRAST */
+ MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x50
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x5c
+ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59
+ >;
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh {
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&reg_sd1_vmmc>;
+ bus-width = <4>;
+ no-1-8-v;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
new file mode 100644
index 000000000000..9aaed85138cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-tqma7.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ /* 512 MB - default configuration */
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ pfuze3000: pmic@8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic1>;
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ se97b: temperature-sensor-eeprom@1e {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x1e>;
+ status = "okay";
+ };
+
+ /* ST M24C64 */
+ m24c64: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ status = "okay";
+ };
+
+ at24c02: eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+ pagesize = <16>;
+ status = "okay";
+ };
+
+ ds1339: rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&iomuxc {
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x40000078
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x40000078
+ >;
+ };
+
+ pinctrl_pmic1: pmic1grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x4000005C
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x56
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x51
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x51
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30
+ >;
+ };
+};
+
+&sdma {
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <&vgen4_reg>;
+ vqmmc-supply = <&sw2_reg>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ /*
+ * Errata e10574:
+ * WDOG reset needs to run with WDOG_RESET_B signal enabled.
+ * X1-51 (WDOG1#) signal needs carrier board handling to reset
+ * TQMa7 on X1-22 (RESET_IN#).
+ */
+ fsl,ext-reset-output;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts
new file mode 100644
index 000000000000..221274c73dbd
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-mba7.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7d-tqma7.dtsi"
+#include "imx7-mba7.dtsi"
+
+/ {
+ model = "TQ Systems TQMa7D board on MBa7 carrier board";
+ compatible = "tq,imx7d-mba7", "fsl,imx7d";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii-id";
+ phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
+ phy-reset-delay = <1>;
+ phy-supply = <&reg_fec2_pwdn>;
+ phy-handle = <&ethphy2_0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy2_0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ /* LED1: Link/Activity, LED2: error */
+ ti,led-function = <0x0db0>;
+ /* active low, LED1/2 driven by phy */
+ ti,led-ctrl = <0x1001>;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_mba7_1>;
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x02
+ MX7D_PAD_SD2_WP__ENET2_MDC 0x00
+ MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x71
+ MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x71
+ MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x71
+ MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x71
+ MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x71
+ MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x71
+ MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x79
+ MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x79
+ MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x79
+ MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x79
+ MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x79
+ MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x79
+ /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x40000070
+ /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+ MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x40000078
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ /* #pcie_wake */
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x70
+ /* #pcie_rst */
+ MX7D_PAD_SD2_CLK__GPIO5_IO12 0x70
+ /* #pcie_dis */
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x70
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c
+ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59
+ >;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ /* 1.5V logically from 3.3V */
+ /* probe deferral not supported */
+ /* pcie-bus-supply = <&reg_mpcie_1v5>; */
+ reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ disable-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+ power-on-gpio = <&gpio2 30 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ vbus-supply = <&reg_usb_otg2_vbus>;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ dr_mode = "host";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi
new file mode 100644
index 000000000000..8ad3048dac0d
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-tqma7.dtsi"
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
new file mode 100644
index 000000000000..3e467a94e8a6
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
@@ -0,0 +1,941 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device tree file for ZII's RPU2 board
+ *
+ * RPU - Remote Peripheral Unit
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include <dt-bindings/thermal/thermal.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "ZII RPU2 Board";
+ compatible = "zii,imx7d-rpu2", "fsl,imx7d";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ cs2000_ref: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ cs2000_in_dummy: dummy-oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+ <&adc2 1>;
+ };
+
+ reg_can1_stby: regulator-can1-stby {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1_stby>;
+ regulator-name = "can1-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can2_stby: regulator-can2-stby {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2_stby>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vref_1v8: regulator-vref-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "GEN_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v_main: regulator-5p0v-main {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ sound1 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Audio Output 1";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound1_codec>;
+ simple-audio-card,frame-master = <&sound1_codec>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLEFT",
+ "Headphone Jack", "HPRIGHT",
+ "LEFTIN", "HPL",
+ "RIGHTIN", "HPR";
+ simple-audio-card,aux-devs = <&hpa1>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ };
+
+ sound1_codec: simple-audio-card,codec {
+ sound-dai = <&codec1>;
+ clocks = <&cs2000>;
+ };
+ };
+
+ sound2 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Audio Output 2";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound2_codec>;
+ simple-audio-card,frame-master = <&sound2_codec>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLEFT",
+ "Headphone Jack", "HPRIGHT",
+ "LEFTIN", "HPL",
+ "RIGHTIN", "HPR";
+ simple-audio-card,aux-devs = <&hpa2>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ sound2_codec: simple-audio-card,codec {
+ sound-dai = <&codec2>;
+ clocks = <&cs2000>;
+ };
+ };
+
+ sound3 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Audio Output 3";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound3_codec>;
+ simple-audio-card,frame-master = <&sound3_codec>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLEFT",
+ "Headphone Jack", "HPRIGHT",
+ "LEFTIN", "HPL",
+ "RIGHTIN", "HPR";
+ simple-audio-card,aux-devs = <&hpa3>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+
+ sound3_codec: simple-audio-card,codec {
+ sound-dai = <&codec3>;
+ clocks = <&cs2000>;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <&reg_vref_1v8>;
+ status = "okay";
+};
+
+&adc2 {
+ vref-supply = <&reg_vref_1v8>;
+ status = "okay";
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&clks {
+ assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <884736000>;
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ switch: switch@0 {
+ compatible = "marvell,mv88e6085";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_switch>;
+ reg = <0>;
+ eeprom-length = <512>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "eth_cu_1000_1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_1000_2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "pic";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&fec1>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "gigabit_proc";
+ ethernet = <&fec2>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ fsl,magic-packet;
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <&reg_can1_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <&reg_can2_stby>;
+ status = "okay";
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1>;
+
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "",
+ "usb_1_en_b",
+ "usb_2_en_b",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio2>;
+
+ gpio-line-names = "12v_out_en_1",
+ "12v_out_en_2",
+ "12v_out_en_3",
+ "28v_out_en_5",
+ "28v_out_en_1",
+ "28v_out_en_2",
+ "28v_out_en_3",
+ "28v_out_en_4",
+ "", "",
+ "usb_3_en_b",
+ "usb_4_en_b",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pmic@8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ cs2000: clkgen@4e {
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4e>;
+ #clock-cells = <0>;
+ clock-names = "clk_in", "ref_clk";
+ clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24000000>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ codec2: codec@18 {
+ compatible = "ti,tlv320dac3100";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec2>;
+ reg = <0x18>;
+ #sound-dai-cells = <0>;
+ HPVDD-supply = <&reg_3p3v>;
+ SPRVDD-supply = <&reg_3p3v>;
+ SPLVDD-supply = <&reg_3p3v>;
+ AVDD-supply = <&reg_3p3v>;
+ IOVDD-supply = <&reg_3p3v>;
+ DVDD-supply = <&vgen4_reg>;
+ gpio-reset = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ hpa2: amp@60 {
+ compatible = "ti,tpa6130a2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpa2>;
+ reg = <0x60>;
+ power-gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ Vdd-supply = <&reg_5p0v_main>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ codec3: codec@18 {
+ compatible = "ti,tlv320dac3100";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec3>;
+ reg = <0x18>;
+ #sound-dai-cells = <0>;
+ HPVDD-supply = <&reg_3p3v>;
+ SPRVDD-supply = <&reg_3p3v>;
+ SPLVDD-supply = <&reg_3p3v>;
+ AVDD-supply = <&reg_3p3v>;
+ IOVDD-supply = <&reg_3p3v>;
+ DVDD-supply = <&vgen4_reg>;
+ gpio-reset = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ hpa3: amp@60 {
+ compatible = "ti,tpa6130a2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpa3>;
+ reg = <0x60>;
+ power-gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ Vdd-supply = <&reg_5p0v_main>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec1: codec@18 {
+ compatible = "ti,tlv320dac3100";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec1>;
+ reg = <0x18>;
+ #sound-dai-cells = <0>;
+ HPVDD-supply = <&reg_3p3v>;
+ SPRVDD-supply = <&reg_3p3v>;
+ SPLVDD-supply = <&reg_3p3v>;
+ AVDD-supply = <&reg_3p3v>;
+ IOVDD-supply = <&reg_3p3v>;
+ DVDD-supply = <&vgen4_reg>;
+ gpio-reset = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ hpa1: amp@60 {
+ compatible = "ti,tpa6130a2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpa1>;
+ reg = <0x60>;
+ power-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+ Vdd-supply = <&reg_5p0v_main>;
+ };
+};
+
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+ <&clks IMX7D_SAI1_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <36864000>;
+ status = "okay";
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clks IMX7D_SAI2_ROOT_SRC>,
+ <&clks IMX7D_SAI2_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <36864000>;
+ status = "okay";
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+ <&clks IMX7D_SAI3_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <36864000>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+
+ rave-sp {
+ compatible = "zii,rave-sp-rdu2";
+ current-speed = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ watchdog {
+ compatible = "zii,rave-sp-watchdog";
+ };
+
+ eeprom@a3 {
+ compatible = "zii,rave-sp-eeprom";
+ reg = <0xa3 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ zii,eeprom-name = "main-eeprom";
+ };
+ };
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ no-1-8-v;
+ no-sdio;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ no-sdio;
+ no-sd;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&wdog1 {
+ status = "disabled";
+};
+
+&snvs_rtc {
+ status = "disabled";
+};
+
+&snvs_pwrkey {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x2
+ MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x2
+ MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x2
+ MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x59
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
+ MX7D_PAD_SD2_WP__ENET1_MDC 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
+ MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
+ MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
+ MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
+ MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
+ MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
+ MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
+ MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
+ MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
+ MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
+ MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
+ MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
+ MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x1
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x59
+ MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x59
+ >;
+ };
+
+ pinctrl_flexcan1_stby: flexcan1stbygrp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x59
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
+ >;
+ };
+
+ pinctrl_flexcan2_stby: flexcan2stbygrp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
+ >;
+ };
+
+ pinctrl_gpio1: gpio1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x00
+ MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x00
+ >;
+ };
+
+ pinctrl_gpio2: gpio2grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x00
+ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x00
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x00
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x03
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x03
+ MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x03
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x03
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x03
+ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x00
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x00
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x4000007f
+ MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x4000007f
+ MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x4000007f
+ MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4gpiogrp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x4000007f
+ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x4000007f
+ >;
+ };
+
+ pinctrl_leds_debug: debuggrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x59
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x30
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f
+ MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f
+ MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f
+ MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f
+ MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30
+ >;
+ };
+
+ pinctrl_tpa1: tpa6130-1grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x40000038
+ >;
+ };
+
+ pinctrl_tpa2: tpa6130-2grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x40000038
+ >;
+ };
+
+ pinctrl_tpa3: tpa6130-3grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x40000038
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79
+ MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x79
+ MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x79
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x59
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl_codec1: dac1grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x40000038
+ >;
+ };
+
+ pinctrl_codec2: dac2grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x40000038
+ >;
+ };
+
+ pinctrl_codec3: dac3grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x40000038
+ >;
+ };
+
+ pinctrl_switch: switchgrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 6eb98e7c568d..f33b560821b8 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -154,6 +154,7 @@
ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
num-lanes = <1>;
+ num-viewport = <4>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts
new file mode 100644
index 000000000000..a143d566a38b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-mba7.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7s-tqma7.dtsi"
+#include "imx7-mba7.dtsi"
+
+/ {
+ model = "TQ Systems TQMa7S board on MBa7 carrier board";
+ compatible = "tq,imx7s-mba7", "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi
new file mode 100644
index 000000000000..5f5433eb7dd7
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-tqma7.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-tqma7.dtsi"
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 23431faecaf4..d6b4888fa686 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -55,6 +55,14 @@
regulator-always-on;
};
+ reg_peri_3p15v: regulator-peri-3p15v {
+ compatible = "regulator-fixed";
+ regulator-name = "peri_3p15v_reg";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "imx7-sgtl5000";
@@ -77,6 +85,10 @@
assigned-clock-rates = <884736000>;
};
+&csi {
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@@ -121,6 +133,8 @@
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ regulator-always-on;
};
snvs_reg: vsnvs {
@@ -178,6 +192,27 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ ov2680: camera@36 {
+ compatible = "ovti,ov2680";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov2680>;
+ reg = <0x36>;
+ clocks = <&osc>;
+ clock-names = "xvclk";
+ reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ DOVDD-supply = <&sw2_reg>;
+ DVDD-supply = <&sw2_reg>;
+ AVDD-supply = <&reg_peri_3p15v>;
+
+ port {
+ ov2680_to_mipi: endpoint {
+ remote-endpoint = <&mipi_from_sensor>;
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ };
+ };
+ };
};
&i2c3 {
@@ -211,6 +246,22 @@
};
};
+&mipi_csi {
+ clock-frequency = <166000000>;
+ fsl,csis-hs-settle = <3>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_from_sensor: endpoint {
+ remote-endpoint = <&ov2680_to_mipi>;
+ data-lanes = <1>;
+ };
+
+ };
+};
+
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
@@ -277,6 +328,10 @@
status = "okay";
};
+&video_mux {
+ status = "okay";
+};
+
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@@ -331,6 +386,12 @@
>;
};
+ pinctrl_ov2680: ov2660grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14
+ >;
+ };
+
pinctrl_sai1: sai1grp {
fsl,pins = <
MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index e88f53a4c7f4..106711d2c01b 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/imx7-reset.h>
#include "imx7d-pinfunc.h"
/ {
@@ -497,8 +498,43 @@
gpr: iomuxc-gpr@30340000 {
compatible = "fsl,imx7d-iomuxc-gpr",
- "fsl,imx6q-iomuxc-gpr", "syscon";
+ "fsl,imx6q-iomuxc-gpr", "syscon",
+ "simple-mfd";
reg = <0x30340000 0x10000>;
+
+ mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <0>;
+ mux-reg-masks = <0x14 0x00000010>;
+ };
+
+ video_mux: csi-mux {
+ compatible = "video-mux";
+ mux-controls = <&mux 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_csi_mux>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ csi_mux_to_csi: endpoint {
+ remote-endpoint = <&csi_from_csi_mux>;
+ };
+ };
+ };
};
ocotp: ocotp-ctrl@30350000 {
@@ -606,7 +642,13 @@
#address-cells = <1>;
#size-cells = <0>;
- pgc_pcie_phy: pgc-power-domain@1 {
+ pgc_mipi_phy: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <0>;
+ power-supply = <&reg_1p0d>;
+ };
+
+ pgc_pcie_phy: power-domain@1 {
#power-domain-cells = <0>;
reg = <1>;
power-supply = <&reg_1p0d>;
@@ -628,6 +670,7 @@
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ADC_ROOT_CLK>;
clock-names = "adc";
+ #io-channel-cells = <1>;
status = "disabled";
};
@@ -637,6 +680,7 @@
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ADC_ROOT_CLK>;
clock-names = "adc";
+ #io-channel-cells = <1>;
status = "disabled";
};
@@ -696,6 +740,23 @@
status = "disabled";
};
+ csi: csi@30710000 {
+ compatible = "fsl,imx7-csi";
+ reg = <0x30710000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "axi", "mclk", "dcic";
+ status = "disabled";
+
+ port {
+ csi_from_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_to_csi>;
+ };
+ };
+ };
+
lcdif: lcdif@30730000 {
compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
reg = <0x30730000 0x10000>;
@@ -705,6 +766,35 @@
clock-names = "pix", "axi";
status = "disabled";
};
+
+ mipi_csi: mipi-csi@30750000 {
+ compatible = "fsl,imx7-mipi-csi2";
+ reg = <0x30750000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+ <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+ clock-names = "pclk", "wrap", "phy";
+ power-domains = <&pgc_mipi_phy>;
+ phy-supply = <&reg_1p0d>;
+ resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+ reset-names = "mrst";
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_vc0_to_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_from_mipi_vc0>;
+ };
+ };
+ };
};
aips3: aips-bus@30800000 {
@@ -1067,8 +1157,8 @@
compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_SDMA_CORE_CLK>,
- <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_SDMA_CORE_CLK>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index fca6e50f37c8..d6b711011cba 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -286,6 +286,12 @@
status = "disabled";
};
+ memory-controller@40ab0000 {
+ compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
+ reg = <0x40ab0000 0x1000>;
+ clocks = <&pcc3 IMX7ULP_CLK_MMDC>;
+ };
+
iomuxc1: pinctrl@40ac0000 {
compatible = "fsl,imx7ulp-iomuxc1";
reg = <0x40ac0000 0x1000>;
@@ -359,5 +365,11 @@
compatible = "fsl,imx7ulp-sim", "syscon";
reg = <0x410a3000 0x1000>;
};
+
+ ocotp: ocotp-ctrl@410a6000 {
+ compatible = "fsl,imx7ulp-ocotp", "syscon";
+ reg = <0x410a6000 0x4000>;
+ clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
+ };
};
};
diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts
index f46a11827ef6..4adf4c96f798 100644
--- a/arch/arm/boot/dts/lpc3250-ea3250.dts
+++ b/arch/arm/boot/dts/lpc3250-ea3250.dts
@@ -201,6 +201,7 @@
&mac {
phy-mode = "rmii";
use-iram;
+ status = "okay";
};
/* Here, choose exactly one from: ohci, usbd */
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
index ebd19258e22b..1b15f798794b 100644
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -134,6 +134,7 @@
&mac {
phy-mode = "rmii";
use-iram;
+ status = "okay";
};
/* Here, choose exactly one from: ohci, usbd */
@@ -201,8 +202,6 @@
};
&ssp0 {
- #address-cells = <1>;
- #size-cells = <0>;
num-cs = <1>;
cs-gpios = <&gpio 3 5 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 20b38f4ade37..7b7ec7b1217b 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -1,14 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* NXP LPC32xx SoC
*
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
* Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/clock/lpc32xx-clock.h>
@@ -152,6 +147,7 @@
reg = <0x31060000 0x1000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_MAC>;
+ status = "disabled";
};
emc: memory-controller@31080000 {
@@ -185,6 +181,8 @@
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_SSP0>;
clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -192,6 +190,8 @@
compatible = "nxp,lpc3220-spi";
reg = <0x20088000 0x1000>;
clocks = <&clk LPC32XX_CLK_SPI1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -205,6 +205,8 @@
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_SSP1>;
clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -212,12 +214,15 @@
compatible = "nxp,lpc3220-spi";
reg = <0x20090000 0x1000>;
clocks = <&clk LPC32XX_CLK_SPI2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
i2s0: i2s@20094000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x20094000 0x1000>;
+ status = "disabled";
};
sd: sd@20098000 {
@@ -232,7 +237,8 @@
i2s1: i2s@2009c000 {
compatible = "nxp,lpc3220-i2s";
- reg = <0x2009C000 0x1000>;
+ reg = <0x2009c000 0x1000>;
+ status = "disabled";
};
/* UART5 first since it is the default console, ttyS0 */
@@ -275,7 +281,7 @@
i2c1: i2c@400a0000 {
compatible = "nxp,pnx-i2c";
- reg = <0x400A0000 0x100>;
+ reg = <0x400a0000 0x100>;
interrupt-parent = <&sic1>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
@@ -286,7 +292,7 @@
i2c2: i2c@400a8000 {
compatible = "nxp,pnx-i2c";
- reg = <0x400A8000 0x100>;
+ reg = <0x400a8000 0x100>;
interrupt-parent = <&sic1>;
interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
@@ -297,7 +303,7 @@
mpwm: mpwm@400e8000 {
compatible = "nxp,lpc3220-motor-pwm";
- reg = <0x400E8000 0x78>;
+ reg = <0x400e8000 0x78>;
status = "disabled";
#pwm-cells = <2>;
};
@@ -396,7 +402,7 @@
timer4: timer@4002c000 {
compatible = "nxp,lpc3220-timer";
- reg = <0x4002C000 0x1000>;
+ reg = <0x4002c000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
clocks = <&clk LPC32XX_CLK_TIMER4>;
clock-names = "timerclk";
@@ -414,7 +420,7 @@
watchdog: watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
- reg = <0x4003C000 0x1000>;
+ reg = <0x4003c000 0x1000>;
clocks = <&clk LPC32XX_CLK_WDOG>;
};
@@ -453,7 +459,7 @@
timer1: timer@4004c000 {
compatible = "nxp,lpc3220-timer";
- reg = <0x4004C000 0x1000>;
+ reg = <0x4004c000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
clocks = <&clk LPC32XX_CLK_TIMER1>;
clock-names = "timerclk";
@@ -479,7 +485,7 @@
pwm1: pwm@4005c000 {
compatible = "nxp,lpc3220-pwm";
- reg = <0x4005C000 0x4>;
+ reg = <0x4005c000 0x4>;
clocks = <&clk LPC32XX_CLK_PWM1>;
assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
@@ -488,7 +494,7 @@
pwm2: pwm@4005c004 {
compatible = "nxp,lpc3220-pwm";
- reg = <0x4005C004 0x4>;
+ reg = <0x4005c004 0x4>;
clocks = <&clk LPC32XX_CLK_PWM2>;
assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
index ba1ddd93b8f8..dcb1d9bd0922 100644
--- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
+++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
@@ -204,7 +204,6 @@
};
&qspi {
- fsl,qspi-has-second-chip;
status = "okay";
flash: flash@0 {
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index ca60730dda40..74a67604876c 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -146,6 +146,10 @@
status = "okay";
};
+&esdhc {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index fe6eecf01da1..464df4290ffc 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -186,7 +186,6 @@
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
- big-endian;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 6f54a8897574..8841783aceec 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -252,6 +252,15 @@
#size-cells = <0>;
status = "disabled";
};
+
+ rtc: rtc@740 {
+ compatible = "amlogic,meson6-rtc";
+ reg = <0x740 0x14>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
};
usb0: usb@c9040000 {
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index a9781243453e..7ef442462ea4 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -345,6 +345,11 @@
status = "disabled";
};
+ clock-measure@8758 {
+ compatible = "amlogic,meson8-clk-measure";
+ reg = <0x8758 0x1c>;
+ };
+
pinctrl_cbus: pinctrl@9880 {
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0x9880 0x10>;
@@ -536,6 +541,11 @@
compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
};
+&rtc {
+ compatible = "amlogic,meson8-rtc";
+ resets = <&reset RESET_RTC>;
+};
+
&saradc {
compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
clocks = <&clkc CLKID_XTAL>,
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 3ca9638fad09..9bf4249cb60d 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -88,6 +88,14 @@
};
};
+ rtc32k_xtal: rtc32k-xtal-clk {
+ /* X2 in the schematics */
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "RTC32K";
+ #clock-cells = <0>;
+ };
+
usb_vbus: regulator-usb-vbus {
/*
* Silergy SY6288CCAC-GP 2A Power Distribution Switch.
@@ -347,6 +355,12 @@
clock-names = "clkin0";
};
+&rtc {
+ status = "okay";
+ clocks = <&rtc32k_xtal>;
+ vdd-supply = <&vcc_rtc>;
+};
+
/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
&uart_AO {
status = "okay";
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 3b0e0f8fbc23..f3ad9397f670 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -124,6 +124,14 @@
io-channels = <&saradc 8>;
};
+ rtc32k_xtal: rtc32k-xtal-clk {
+ /* X3 in the schematics */
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "RTC32K";
+ #clock-cells = <0>;
+ };
+
vcc_1v8: regulator-vcc-1v8 {
/*
* RICHTEK RT9179 configured for a fixed output voltage of
@@ -234,7 +242,59 @@
};
};
+&gpio {
+ gpio-line-names = /* Bank GPIOX */
+ "J2 Header Pin 35", "J2 Header Pin 36",
+ "J2 Header Pin 32", "J2 Header Pin 31",
+ "J2 Header Pin 29", "J2 Header Pin 18",
+ "J2 Header Pin 22", "J2 Header Pin 16",
+ "J2 Header Pin 23", "J2 Header Pin 21",
+ "J2 Header Pin 19", "J2 Header Pin 33",
+ "J2 Header Pin 8", "J2 Header Pin 10",
+ "J2 Header Pin 15", "J2 Header Pin 13",
+ "J2 Header Pin 24", "J2 Header Pin 26",
+ /* Bank GPIOY */
+ "Revision (upper)", "Revision (lower)",
+ "J2 Header Pin 7", "", "J2 Header Pin 12",
+ "J2 Header Pin 11", "", "", "",
+ "TFLASH_VDD_EN", "", "",
+ /* Bank GPIODV */
+ "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL",
+ "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)",
+ "",
+ /* Bank GPIOH */
+ "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+ "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1",
+ "ETH_TXD0", "ETH_TXD3", "ETH_TXD2",
+ "ETH_RGMII_TX_CLK",
+ /* Bank CARD */
+ "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)",
+ "SD_CLK", "SD_CMD", "SD_DATA3 (SDB_D3)",
+ "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)",
+ /* Bank BOOT */
+ "SDC_D0 (EMMC)", "SDC_D1 (EMMC)",
+ "SDC_D2 (EMMC)", "SDC_D3 (EMMC)",
+ "SDC_D4 (EMMC)", "SDC_D5 (EMMC)",
+ "SDC_D6 (EMMC)", "SDC_D7 (EMMC)",
+ "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)",
+ "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "",
+ "", "", "", "",
+ /* Bank DIF */
+ "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV",
+ "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2",
+ "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT",
+ "ETH_MDC", "ETH_MDIO";
+};
+
&gpio_ao {
+ gpio-line-names = "UART TX", "UART RX", "",
+ "TF_3V3N_1V8_EN", "USB_HUB_RST_N",
+ "USB_OTG_PWREN", "J7 Header Pin 2",
+ "IR_IN", "J7 Header Pin 4",
+ "J7 Header Pin 6", "J7 Header Pin 5",
+ "J7 Header Pin 7", "HDMI_CEC",
+ "SYS_LED", "", "";
+
/*
* WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
* to be turned high in order to be detected by the USB Controller.
@@ -293,6 +353,12 @@
clock-names = "clkin0";
};
+&rtc {
+ /* needs to be enabled manually when a battery is connected */
+ clocks = <&rtc32k_xtal>;
+ vdd-supply = <&vdd_rtc>;
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index fe84a8c3ce81..800cd65fc50a 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -294,6 +294,11 @@
status = "disabled";
};
+ clock-measure@8758 {
+ compatible = "amlogic,meson8b-clk-measure";
+ reg = <0x8758 0x1c>;
+ };
+
pinctrl_cbus: pinctrl@9880 {
compatible = "amlogic,meson8b-cbus-pinctrl";
reg = <0x9880 0x10>;
@@ -505,6 +510,11 @@
compatible = "amlogic,meson8b-pwm";
};
+&rtc {
+ compatible = "amlogic,meson8b-rtc";
+ resets = <&reset RESET_RTC>;
+};
+
&saradc {
compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
clocks = <&clkc CLKID_XTAL>,
diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts
index 96b9913ecc1f..09c1dbc0bb69 100644
--- a/arch/arm/boot/dts/omap2420-n810.dts
+++ b/arch/arm/boot/dts/omap2420-n810.dts
@@ -48,7 +48,7 @@
pinctrl-names = "default";
pinctrl-0 = <&aic33_pins>;
- gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
ai3x-gpio-func = <
10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
index 5e8169153414..a1dacb8a6987 100644
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -7,6 +7,7 @@
*/
#include "omap443x.dtsi"
+#include "omap4-mcpdm.dtsi"
/ {
model = "Gumstix Duovero";
@@ -82,16 +83,6 @@
>;
};
- mcpdm_pins: pinmux_mcpdm_pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
- OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
- OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
- OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
- OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
- >;
- };
-
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
@@ -210,16 +201,6 @@
status = "okay";
};
-&mcpdm {
- pinctrl-names = "default";
- pinctrl-0 = <&mcpdm_pins>;
-
- clocks = <&twl6040>;
- clock-names = "pdmclk";
-
- status = "okay";
-};
-
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi
new file mode 100644
index 000000000000..67072df39bc7
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi
@@ -0,0 +1,501 @@
+&l4_abe { /* 0x40100000 */
+ compatible = "ti,omap4-l4-abe", "simple-bus";
+ reg = <0x40100000 0x400>,
+ <0x40100400 0x400>;
+ reg-names = "la", "ap";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */
+ <0x49000000 0x49000000 0x100000>;
+ segment@0 { /* 0x40100000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges =
+ /* CPU to L4 ABE mapping */
+ <0x00000000 0x00000000 0x000400>, /* ap 0 */
+ <0x00000400 0x00000400 0x000400>, /* ap 1 */
+ <0x00022000 0x00022000 0x001000>, /* ap 2 */
+ <0x00023000 0x00023000 0x001000>, /* ap 3 */
+ <0x00024000 0x00024000 0x001000>, /* ap 4 */
+ <0x00025000 0x00025000 0x001000>, /* ap 5 */
+ <0x00026000 0x00026000 0x001000>, /* ap 6 */
+ <0x00027000 0x00027000 0x001000>, /* ap 7 */
+ <0x00028000 0x00028000 0x001000>, /* ap 8 */
+ <0x00029000 0x00029000 0x001000>, /* ap 9 */
+ <0x0002a000 0x0002a000 0x001000>, /* ap 10 */
+ <0x0002b000 0x0002b000 0x001000>, /* ap 11 */
+ <0x0002e000 0x0002e000 0x001000>, /* ap 12 */
+ <0x0002f000 0x0002f000 0x001000>, /* ap 13 */
+ <0x00030000 0x00030000 0x001000>, /* ap 14 */
+ <0x00031000 0x00031000 0x001000>, /* ap 15 */
+ <0x00032000 0x00032000 0x001000>, /* ap 16 */
+ <0x00033000 0x00033000 0x001000>, /* ap 17 */
+ <0x00038000 0x00038000 0x001000>, /* ap 18 */
+ <0x00039000 0x00039000 0x001000>, /* ap 19 */
+ <0x0003a000 0x0003a000 0x001000>, /* ap 20 */
+ <0x0003b000 0x0003b000 0x001000>, /* ap 21 */
+ <0x0003c000 0x0003c000 0x001000>, /* ap 22 */
+ <0x0003d000 0x0003d000 0x001000>, /* ap 23 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 24 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 25 */
+ <0x00080000 0x00080000 0x010000>, /* ap 26 */
+ <0x00080000 0x00080000 0x001000>, /* ap 27 */
+ <0x000a0000 0x000a0000 0x010000>, /* ap 28 */
+ <0x000a0000 0x000a0000 0x001000>, /* ap 29 */
+ <0x000c0000 0x000c0000 0x010000>, /* ap 30 */
+ <0x000c0000 0x000c0000 0x001000>, /* ap 31 */
+ <0x000f1000 0x000f1000 0x001000>, /* ap 32 */
+ <0x000f2000 0x000f2000 0x001000>, /* ap 33 */
+
+ /* L3 to L4 ABE mapping */
+ <0x49000000 0x49000000 0x000400>, /* ap 0 */
+ <0x49000400 0x49000400 0x000400>, /* ap 1 */
+ <0x49022000 0x49022000 0x001000>, /* ap 2 */
+ <0x49023000 0x49023000 0x001000>, /* ap 3 */
+ <0x49024000 0x49024000 0x001000>, /* ap 4 */
+ <0x49025000 0x49025000 0x001000>, /* ap 5 */
+ <0x49026000 0x49026000 0x001000>, /* ap 6 */
+ <0x49027000 0x49027000 0x001000>, /* ap 7 */
+ <0x49028000 0x49028000 0x001000>, /* ap 8 */
+ <0x49029000 0x49029000 0x001000>, /* ap 9 */
+ <0x4902a000 0x4902a000 0x001000>, /* ap 10 */
+ <0x4902b000 0x4902b000 0x001000>, /* ap 11 */
+ <0x4902e000 0x4902e000 0x001000>, /* ap 12 */
+ <0x4902f000 0x4902f000 0x001000>, /* ap 13 */
+ <0x49030000 0x49030000 0x001000>, /* ap 14 */
+ <0x49031000 0x49031000 0x001000>, /* ap 15 */
+ <0x49032000 0x49032000 0x001000>, /* ap 16 */
+ <0x49033000 0x49033000 0x001000>, /* ap 17 */
+ <0x49038000 0x49038000 0x001000>, /* ap 18 */
+ <0x49039000 0x49039000 0x001000>, /* ap 19 */
+ <0x4903a000 0x4903a000 0x001000>, /* ap 20 */
+ <0x4903b000 0x4903b000 0x001000>, /* ap 21 */
+ <0x4903c000 0x4903c000 0x001000>, /* ap 22 */
+ <0x4903d000 0x4903d000 0x001000>, /* ap 23 */
+ <0x4903e000 0x4903e000 0x001000>, /* ap 24 */
+ <0x4903f000 0x4903f000 0x001000>, /* ap 25 */
+ <0x49080000 0x49080000 0x010000>, /* ap 26 */
+ <0x49080000 0x49080000 0x001000>, /* ap 27 */
+ <0x490a0000 0x490a0000 0x010000>, /* ap 28 */
+ <0x490a0000 0x490a0000 0x001000>, /* ap 29 */
+ <0x490c0000 0x490c0000 0x010000>, /* ap 30 */
+ <0x490c0000 0x490c0000 0x001000>, /* ap 31 */
+ <0x490f1000 0x490f1000 0x001000>, /* ap 32 */
+ <0x490f2000 0x490f2000 0x001000>; /* ap 33 */
+
+ target-module@22000 { /* 0x40122000, ap 2 02.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "mcbsp1";
+ reg = <0x2208c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>,
+ <0x49022000 0x49022000 0x1000>;
+
+ mcbsp1: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@24000 { /* 0x40124000, ap 4 04.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "mcbsp2";
+ reg = <0x2408c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>,
+ <0x49024000 0x49024000 0x1000>;
+
+ mcbsp2: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@26000 { /* 0x40126000, ap 6 06.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "mcbsp3";
+ reg = <0x2608c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>,
+ <0x49026000 0x49026000 0x1000>;
+
+ mcbsp3: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@28000 { /* 0x40128000, ap 8 08.0 */
+ compatible = "ti,sysc-mcasp", "ti,sysc";
+ ti,hwmods = "mcasp";
+ reg = <0x28000 0x4>,
+ <0x28004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>,
+ <0x49028000 0x49028000 0x1000>;
+
+ /*
+ * Child device unsupported by davinci-mcasp. At least
+ * RX path is disabled for omap4, and only DIT mode
+ * works with no I2S. See also old Android kernel
+ * omap-mcasp driver for more information.
+ */
+ };
+
+ target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>,
+ <0x4902a000 0x4902a000 0x1000>;
+ };
+
+ target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "dmic";
+ reg = <0x2e000 0x4>,
+ <0x2e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_DMIC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2e000 0x1000>,
+ <0x4902e000 0x4902e000 0x1000>;
+
+ dmic: dmic@0 {
+ compatible = "ti,omap4-dmic";
+ reg = <0x0 0x7f>, /* MPU private access */
+ <0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 67>;
+ dma-names = "up_link";
+ status = "disabled";
+ };
+ };
+
+ target-module@30000 { /* 0x40130000, ap 14 0e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "wd_timer3";
+ reg = <0x30000 0x4>,
+ <0x30010 0x4>,
+ <0x30014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x30000 0x1000>,
+ <0x49030000 0x49030000 0x1000>;
+
+ wdt3: wdt@0 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mcpdm";
+ reg = <0x32000 0x4>,
+ <0x32010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCPDM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>,
+ <0x49032000 0x49032000 0x1000>;
+
+ /* Must be only enabled for boards with pdmclk wired */
+ status = "disabled";
+
+ mcpdm: mcpdm@0 {
+ compatible = "ti,omap4-mcpdm";
+ reg = <0x0 0x7f>, /* MPU private access */
+ <0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 65>,
+ <&sdma 66>;
+ dma-names = "up_link", "dn_link";
+ };
+ };
+
+ target-module@38000 { /* 0x40138000, ap 18 12.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer5";
+ reg = <0x38000 0x4>,
+ <0x38010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x38000 0x1000>,
+ <0x49038000 0x49038000 0x1000>;
+
+ timer5: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x00000000 0x80>,
+ <0x49038000 0x80>;
+ clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@3a000 { /* 0x4013a000, ap 20 14.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer6";
+ reg = <0x3a000 0x4>,
+ <0x3a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3a000 0x1000>,
+ <0x4903a000 0x4903a000 0x1000>;
+
+ timer6: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x00000000 0x80>,
+ <0x4903a000 0x80>;
+ clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@3c000 { /* 0x4013c000, ap 22 16.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer7";
+ reg = <0x3c000 0x4>,
+ <0x3c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3c000 0x1000>,
+ <0x4903c000 0x4903c000 0x1000>;
+
+ timer7: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x00000000 0x80>,
+ <0x4903c000 0x80>;
+ clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@3e000 { /* 0x4013e000, ap 24 18.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer8";
+ reg = <0x3e000 0x4>,
+ <0x3e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>,
+ <0x4903e000 0x4903e000 0x1000>;
+
+ timer8: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x00000000 0x80>,
+ <0x4903e000 0x80>;
+ clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@80000 { /* 0x40180000, ap 26 1a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>,
+ <0x49080000 0x49080000 0x10000>;
+ };
+
+ target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa0000 0x10000>,
+ <0x490a0000 0x490a0000 0x10000>;
+ };
+
+ target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc0000 0x10000>,
+ <0x490c0000 0x490c0000 0x10000>;
+ };
+
+ target-module@f1000 { /* 0x401f1000, ap 32 20.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "aess";
+ reg = <0xf1000 0x4>,
+ <0xf1010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf1000 0x1000>,
+ <0x490f1000 0x490f1000 0x1000>;
+
+ /*
+ * No child device binding or driver in mainline.
+ * See Android tree and related upstreaming efforts
+ * for the old driver.
+ */
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap4-mcpdm.dtsi b/arch/arm/boot/dts/omap4-mcpdm.dtsi
new file mode 100644
index 000000000000..915a9b31a33b
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-mcpdm.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common omap4 mcpdm configuration
+ *
+ * Only include this file if your board has pdmclk wired from the
+ * pmic to ABE as mcpdm uses an external clock for the module.
+ */
+
+&omap4_pmx_core {
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ /* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */
+ OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+ /* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */
+ OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+ /* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */
+ OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)
+
+ /* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */
+ OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+ /* 0x4a10010e abe_clks.abe_clks ah26 */
+ OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+};
+
+&mcpdm_module {
+ /*
+ * McPDM pads must be muxed at the interconnect target module
+ * level as the module on the SoC needs external clock from
+ * the PMIC
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
+};
+
+&mcpdm {
+ clocks = <&twl6040>;
+ clock-names = "pdmclk";
+};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 926f018823a4..68e1894df713 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/input/input.h>
#include "elpida_ecb240abacn.dtsi"
+#include "omap4-mcpdm.dtsi"
/ {
memory@80000000 {
@@ -226,16 +227,6 @@
>;
};
- mcpdm_pins: pinmux_mcpdm_pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
- OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
- OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
- OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
- OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
- >;
- };
-
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
@@ -509,16 +500,6 @@
status = "okay";
};
-&mcpdm {
- pinctrl-names = "default";
- pinctrl-0 = <&mcpdm_pins>;
-
- clocks = <&twl6040>;
- clock-names = "pdmclk";
-
- status = "okay";
-};
-
&twl_usb_comparator {
usb-supply = <&vusb>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index c88817bdcc56..fb51a4bffd35 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -9,6 +9,7 @@
#include "omap443x.dtsi"
#include "elpida_ecb240abacn.dtsi"
+#include "omap4-mcpdm.dtsi"
/ {
model = "TI OMAP4 SDP board";
@@ -246,16 +247,6 @@
>;
};
- mcpdm_pins: pinmux_mcpdm_pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
- OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
- OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
- OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
- OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
- >;
- };
-
dmic_pins: pinmux_dmic_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
@@ -649,16 +640,6 @@
status = "okay";
};
-&mcpdm {
- pinctrl-names = "default";
- pinctrl-0 = <&mcpdm_pins>;
-
- clocks = <&twl6040>;
- clock-names = "pdmclk";
-
- status = "okay";
-};
-
&twl_usb_comparator {
usb-supply = <&vusb>;
};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index 10fce28ceb5b..9562d372077c 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -7,6 +7,7 @@
* published by the Free Software Foundation.
*/
#include "omap4460.dtsi"
+#include "omap4-mcpdm.dtsi"
/ {
model = "Variscite VAR-SOM-OM44";
@@ -74,16 +75,6 @@
>;
};
- mcpdm_pins: pinmux_mcpdm_pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
- OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
- OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
- OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
- OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
- >;
- };
-
tsc2004_pins: pinmux_tsc2004_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */
@@ -251,16 +242,6 @@
status = "disabled";
};
-&mcpdm {
- pinctrl-names = "default";
- pinctrl-0 = <&mcpdm_pins>;
-
- clocks = <&twl6040>;
- clock-names = "pdmclk";
-
- status = "okay";
-};
-
&gpmc {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 1a96d4317c97..442a737f35fe 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -148,6 +148,9 @@
l4_per: interconnect@48000000 {
};
+ l4_abe: interconnect@40100000 {
+ };
+
ocmcram: ocmcram@40304000 {
compatible = "mmio-sram";
reg = <0x40304000 0xa000>; /* 40k */
@@ -214,130 +217,6 @@
#iommu-cells = <0>;
ti,iommu-bus-err-back;
};
- target-module@40130000 {
- compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "wd_timer3";
- reg = <0x40130000 0x4>,
- <0x40130010 0x4>,
- <0x40130014 0x4>;
- reg-names = "rev", "sysc", "syss";
- ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
- SYSC_OMAP2_SOFTRESET)>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- ti,syss-mask = <1>;
- /* Domains (V, P, C): abe, abe_pwrdm, abe_clkdm */
- clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00000000 0x40130000 0x1000>, /* MPU private access */
- <0x49030000 0x49030000 0x0080>; /* L3 Interconnect */
-
- wdt3: wdt@0 {
- compatible = "ti,omap4-wdt", "ti,omap3-wdt";
- reg = <0x0 0x80>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- mcpdm: mcpdm@40132000 {
- compatible = "ti,omap4-mcpdm";
- reg = <0x40132000 0x7f>, /* MPU private access */
- <0x49032000 0x7f>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mcpdm";
- dmas = <&sdma 65>,
- <&sdma 66>;
- dma-names = "up_link", "dn_link";
- status = "disabled";
- };
-
- dmic: dmic@4012e000 {
- compatible = "ti,omap4-dmic";
- reg = <0x4012e000 0x7f>, /* MPU private access */
- <0x4902e000 0x7f>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "dmic";
- dmas = <&sdma 67>;
- dma-names = "up_link";
- status = "disabled";
- };
-
- mcbsp1: mcbsp@40122000 {
- compatible = "ti,omap4-mcbsp";
- reg = <0x40122000 0xff>, /* MPU private access */
- <0x49022000 0xff>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "common";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp1";
- dmas = <&sdma 33>,
- <&sdma 34>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mcbsp2: mcbsp@40124000 {
- compatible = "ti,omap4-mcbsp";
- reg = <0x40124000 0xff>, /* MPU private access */
- <0x49024000 0xff>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "common";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp2";
- dmas = <&sdma 17>,
- <&sdma 18>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mcbsp3: mcbsp@40126000 {
- compatible = "ti,omap4-mcbsp";
- reg = <0x40126000 0xff>, /* MPU private access */
- <0x49026000 0xff>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "common";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp3";
- dmas = <&sdma 19>,
- <&sdma 20>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- target-module@40128000 {
- compatible = "ti,sysc-mcasp", "ti,sysc";
- ti,hwmods = "mcasp";
- reg = <0x40128000 0x4>,
- <0x40128004 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00000000 0x40128000 0x1000>, /* MPU */
- <0x49028000 0x49028000 0x1000>; /* L3 */
-
- /*
- * Child device unsupported by davinci-mcasp. At least
- * RX path is disabled for omap4, and only DIT mode
- * works with no I2S. See also old Android kernel
- * omap-mcasp driver for more information.
- */
- };
-
target-module@4012c000 {
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "slimbus1";
@@ -359,33 +238,6 @@
/* No child device binding or driver in mainline */
};
- target-module@401f1000 {
- compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "aess";
- reg = <0x401f1000 0x4>,
- <0x401f1010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-midle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
- clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */
- <0x490f1000 0x490f1000 0x1000>; /* L3 */
-
- /*
- * No child device binding or driver in mainline.
- * See Android tree and related upstreaming efforts
- * for the old driver.
- */
- };
-
dmm@4e000000 {
compatible = "ti,omap4-dmm";
reg = <0x4e000000 0x800>;
@@ -417,43 +269,6 @@
hw-caps-temp-alert;
};
- timer5: timer@40138000 {
- compatible = "ti,omap4430-timer";
- reg = <0x40138000 0x80>,
- <0x49038000 0x80>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer5";
- ti,timer-dsp;
- };
-
- timer6: timer@4013a000 {
- compatible = "ti,omap4430-timer";
- reg = <0x4013a000 0x80>,
- <0x4903a000 0x80>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer6";
- ti,timer-dsp;
- };
-
- timer7: timer@4013c000 {
- compatible = "ti,omap4430-timer";
- reg = <0x4013c000 0x80>,
- <0x4903c000 0x80>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer7";
- ti,timer-dsp;
- };
-
- timer8: timer@4013e000 {
- compatible = "ti,omap4430-timer";
- reg = <0x4013e000 0x80>,
- <0x4903e000 0x80>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer8";
- ti,timer-pwm;
- ti,timer-dsp;
- };
-
aes1: aes@4b501000 {
compatible = "ti,omap4-aes";
ti,hwmods = "aes1";
@@ -629,4 +444,5 @@
};
#include "omap4-l4.dtsi"
+#include "omap4-l4-abe.dtsi"
#include "omap44xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 61a06f6add3c..2dc3e1950c96 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -667,14 +667,16 @@
};
};
-&mcpdm {
+&mcpdm_module {
+ /* Module on the SoC needs external clock from the PMIC */
pinctrl-names = "default";
pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
+};
+&mcpdm {
clocks = <&twl6040>;
clock-names = "pdmclk";
-
- status = "okay";
};
&mcbsp1 {
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi
new file mode 100644
index 000000000000..dc9d0532f4cf
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi
@@ -0,0 +1,447 @@
+&l4_abe { /* 0x40100000 */
+ compatible = "ti,omap5-l4-abe", "simple-bus";
+ reg = <0x40100000 0x400>,
+ <0x40100400 0x400>;
+ reg-names = "la", "ap";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */
+ <0x49000000 0x49000000 0x100000>;
+ segment@0 { /* 0x40100000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges =
+ /* CPU to L4 ABE mapping */
+ <0x00000000 0x00000000 0x000400>, /* ap 0 */
+ <0x00000400 0x00000400 0x000400>, /* ap 1 */
+ <0x00022000 0x00022000 0x001000>, /* ap 2 */
+ <0x00023000 0x00023000 0x001000>, /* ap 3 */
+ <0x00024000 0x00024000 0x001000>, /* ap 4 */
+ <0x00025000 0x00025000 0x001000>, /* ap 5 */
+ <0x00026000 0x00026000 0x001000>, /* ap 6 */
+ <0x00027000 0x00027000 0x001000>, /* ap 7 */
+ <0x00028000 0x00028000 0x001000>, /* ap 8 */
+ <0x00029000 0x00029000 0x001000>, /* ap 9 */
+ <0x0002a000 0x0002a000 0x001000>, /* ap 10 */
+ <0x0002b000 0x0002b000 0x001000>, /* ap 11 */
+ <0x0002e000 0x0002e000 0x001000>, /* ap 12 */
+ <0x0002f000 0x0002f000 0x001000>, /* ap 13 */
+ <0x00030000 0x00030000 0x001000>, /* ap 14 */
+ <0x00031000 0x00031000 0x001000>, /* ap 15 */
+ <0x00032000 0x00032000 0x001000>, /* ap 16 */
+ <0x00033000 0x00033000 0x001000>, /* ap 17 */
+ <0x00038000 0x00038000 0x001000>, /* ap 18 */
+ <0x00039000 0x00039000 0x001000>, /* ap 19 */
+ <0x0003a000 0x0003a000 0x001000>, /* ap 20 */
+ <0x0003b000 0x0003b000 0x001000>, /* ap 21 */
+ <0x0003c000 0x0003c000 0x001000>, /* ap 22 */
+ <0x0003d000 0x0003d000 0x001000>, /* ap 23 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 24 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 25 */
+ <0x00080000 0x00080000 0x010000>, /* ap 26 */
+ <0x00080000 0x00080000 0x001000>, /* ap 27 */
+ <0x000a0000 0x000a0000 0x010000>, /* ap 28 */
+ <0x000a0000 0x000a0000 0x001000>, /* ap 29 */
+ <0x000c0000 0x000c0000 0x010000>, /* ap 30 */
+ <0x000c0000 0x000c0000 0x001000>, /* ap 31 */
+ <0x000f1000 0x000f1000 0x001000>, /* ap 32 */
+ <0x000f2000 0x000f2000 0x001000>, /* ap 33 */
+
+ /* L3 to L4 ABE mapping */
+ <0x49000000 0x49000000 0x000400>, /* ap 0 */
+ <0x49000400 0x49000400 0x000400>, /* ap 1 */
+ <0x49022000 0x49022000 0x001000>, /* ap 2 */
+ <0x49023000 0x49023000 0x001000>, /* ap 3 */
+ <0x49024000 0x49024000 0x001000>, /* ap 4 */
+ <0x49025000 0x49025000 0x001000>, /* ap 5 */
+ <0x49026000 0x49026000 0x001000>, /* ap 6 */
+ <0x49027000 0x49027000 0x001000>, /* ap 7 */
+ <0x49028000 0x49028000 0x001000>, /* ap 8 */
+ <0x49029000 0x49029000 0x001000>, /* ap 9 */
+ <0x4902a000 0x4902a000 0x001000>, /* ap 10 */
+ <0x4902b000 0x4902b000 0x001000>, /* ap 11 */
+ <0x4902e000 0x4902e000 0x001000>, /* ap 12 */
+ <0x4902f000 0x4902f000 0x001000>, /* ap 13 */
+ <0x49030000 0x49030000 0x001000>, /* ap 14 */
+ <0x49031000 0x49031000 0x001000>, /* ap 15 */
+ <0x49032000 0x49032000 0x001000>, /* ap 16 */
+ <0x49033000 0x49033000 0x001000>, /* ap 17 */
+ <0x49038000 0x49038000 0x001000>, /* ap 18 */
+ <0x49039000 0x49039000 0x001000>, /* ap 19 */
+ <0x4903a000 0x4903a000 0x001000>, /* ap 20 */
+ <0x4903b000 0x4903b000 0x001000>, /* ap 21 */
+ <0x4903c000 0x4903c000 0x001000>, /* ap 22 */
+ <0x4903d000 0x4903d000 0x001000>, /* ap 23 */
+ <0x4903e000 0x4903e000 0x001000>, /* ap 24 */
+ <0x4903f000 0x4903f000 0x001000>, /* ap 25 */
+ <0x49080000 0x49080000 0x010000>, /* ap 26 */
+ <0x49080000 0x49080000 0x001000>, /* ap 27 */
+ <0x490a0000 0x490a0000 0x010000>, /* ap 28 */
+ <0x490a0000 0x490a0000 0x001000>, /* ap 29 */
+ <0x490c0000 0x490c0000 0x010000>, /* ap 30 */
+ <0x490c0000 0x490c0000 0x001000>, /* ap 31 */
+ <0x490f1000 0x490f1000 0x001000>, /* ap 32 */
+ <0x490f2000 0x490f2000 0x001000>; /* ap 33 */
+
+ target-module@22000 { /* 0x40122000, ap 2 02.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "mcbsp1";
+ reg = <0x2208c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>,
+ <0x49022000 0x49022000 0x1000>;
+
+ mcbsp1: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@24000 { /* 0x40124000, ap 4 04.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "mcbsp2";
+ reg = <0x2408c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>,
+ <0x49024000 0x49024000 0x1000>;
+
+ mcbsp2: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@26000 { /* 0x40126000, ap 6 06.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "mcbsp3";
+ reg = <0x2608c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>,
+ <0x49026000 0x49026000 0x1000>;
+
+ mcbsp3: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@28000 { /* 0x40128000, ap 8 08.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>,
+ <0x49028000 0x49028000 0x1000>;
+ };
+
+ target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>,
+ <0x4902a000 0x4902a000 0x1000>;
+ };
+
+ target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "dmic";
+ reg = <0x2e000 0x4>,
+ <0x2e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_DMIC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2e000 0x1000>,
+ <0x4902e000 0x4902e000 0x1000>;
+
+ dmic: dmic@0 {
+ compatible = "ti,omap4-dmic";
+ reg = <0x0 0x7f>, /* MPU private access */
+ <0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 67>;
+ dma-names = "up_link";
+ status = "disabled";
+ };
+ };
+
+ target-module@30000 { /* 0x40130000, ap 14 0e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x30000 0x1000>,
+ <0x49030000 0x49030000 0x1000>;
+ };
+
+ mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mcpdm";
+ reg = <0x32000 0x4>,
+ <0x32010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_MCPDM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>,
+ <0x49032000 0x49032000 0x1000>;
+
+ /* Must be only enabled for boards with pdmclk wired */
+ status = "disabled";
+
+ mcpdm: mcpdm@0 {
+ compatible = "ti,omap4-mcpdm";
+ reg = <0x0 0x7f>, /* MPU private access */
+ <0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 65>,
+ <&sdma 66>;
+ dma-names = "up_link", "dn_link";
+ };
+ };
+
+ target-module@38000 { /* 0x40138000, ap 18 12.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer5";
+ reg = <0x38000 0x4>,
+ <0x38010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x38000 0x1000>,
+ <0x49038000 0x49038000 0x1000>;
+
+ timer5: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>,
+ <0x49038000 0x80>;
+ clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@3a000 { /* 0x4013a000, ap 20 14.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer6";
+ reg = <0x3a000 0x4>,
+ <0x3a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3a000 0x1000>,
+ <0x4903a000 0x4903a000 0x1000>;
+
+ timer6: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>,
+ <0x4903a000 0x80>;
+ clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@3c000 { /* 0x4013c000, ap 22 16.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer7";
+ reg = <0x3c000 0x4>,
+ <0x3c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3c000 0x1000>,
+ <0x4903c000 0x4903c000 0x1000>;
+
+ timer7: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>,
+ <0x4903c000 0x80>;
+ clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@3e000 { /* 0x4013e000, ap 24 18.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer8";
+ reg = <0x3e000 0x4>,
+ <0x3e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>,
+ <0x4903e000 0x4903e000 0x1000>;
+
+ timer8: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>,
+ <0x4903e000 0x80>;
+ clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@80000 { /* 0x40180000, ap 26 1a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>,
+ <0x49080000 0x49080000 0x10000>;
+ };
+
+ target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa0000 0x10000>,
+ <0x490a0000 0x490a0000 0x10000>;
+ };
+
+ target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc0000 0x10000>,
+ <0x490c0000 0x490c0000 0x10000>;
+ };
+
+ target-module@f1000 { /* 0x401f1000, ap 32 20.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf1000 0x1000>,
+ <0x490f1000 0x490f1000 0x1000>;
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 2fefaafdf901..4b40e4748649 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -161,6 +161,9 @@
l4_per: interconnect@48000000 {
};
+ l4_abe: interconnect@40100000 {
+ };
+
ocmcram: ocmcram@40300000 {
compatible = "mmio-sram";
reg = <0x40300000 0x20000>; /* 128k */
@@ -202,115 +205,6 @@
ti,iommu-bus-err-back;
};
- mcpdm: mcpdm@40132000 {
- compatible = "ti,omap4-mcpdm";
- reg = <0x40132000 0x7f>, /* MPU private access */
- <0x49032000 0x7f>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mcpdm";
- dmas = <&sdma 65>,
- <&sdma 66>;
- dma-names = "up_link", "dn_link";
- status = "disabled";
- };
-
- dmic: dmic@4012e000 {
- compatible = "ti,omap4-dmic";
- reg = <0x4012e000 0x7f>, /* MPU private access */
- <0x4902e000 0x7f>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "dmic";
- dmas = <&sdma 67>;
- dma-names = "up_link";
- status = "disabled";
- };
-
- mcbsp1: mcbsp@40122000 {
- compatible = "ti,omap4-mcbsp";
- reg = <0x40122000 0xff>, /* MPU private access */
- <0x49022000 0xff>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "common";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp1";
- dmas = <&sdma 33>,
- <&sdma 34>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mcbsp2: mcbsp@40124000 {
- compatible = "ti,omap4-mcbsp";
- reg = <0x40124000 0xff>, /* MPU private access */
- <0x49024000 0xff>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "common";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp2";
- dmas = <&sdma 17>,
- <&sdma 18>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mcbsp3: mcbsp@40126000 {
- compatible = "ti,omap4-mcbsp";
- reg = <0x40126000 0xff>, /* MPU private access */
- <0x49026000 0xff>; /* L3 Interconnect */
- reg-names = "mpu", "dma";
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "common";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp3";
- dmas = <&sdma 19>,
- <&sdma 20>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- timer5: timer@40138000 {
- compatible = "ti,omap5430-timer";
- reg = <0x40138000 0x80>,
- <0x49038000 0x80>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer5";
- ti,timer-dsp;
- ti,timer-pwm;
- };
-
- timer6: timer@4013a000 {
- compatible = "ti,omap5430-timer";
- reg = <0x4013a000 0x80>,
- <0x4903a000 0x80>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer6";
- ti,timer-dsp;
- ti,timer-pwm;
- };
-
- timer7: timer@4013c000 {
- compatible = "ti,omap5430-timer";
- reg = <0x4013c000 0x80>,
- <0x4903c000 0x80>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer7";
- ti,timer-dsp;
- };
-
- timer8: timer@4013e000 {
- compatible = "ti,omap5430-timer";
- reg = <0x4013e000 0x80>,
- <0x4903e000 0x80>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer8";
- ti,timer-dsp;
- ti,timer-pwm;
- };
-
dmm@4e000000 {
compatible = "ti,omap5-dmm";
reg = <0x4e000000 0x800>;
@@ -517,3 +411,6 @@
&core_thermal {
coefficients = <0 2000>;
};
+
+#include "omap5-l4-abe.dtsi"
+#include "omap54xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index bd6907db615b..65975df6a8c3 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -714,6 +714,7 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pm8921_gpio 0 0 44>;
#gpio-cells = <2>;
};
@@ -1302,8 +1303,9 @@
<0x04700300 0x200>,
<0x04700500 0x5c>;
reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
- clock-names = "iface_clk";
- clocks = <&mmcc DSI_M_AHB_CLK>;
+ clock-names = "iface_clk", "ref";
+ clocks = <&mmcc DSI_M_AHB_CLK>,
+ <&cxo_board>;
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 9e75f97770ce..1008dfbcb972 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -400,8 +400,8 @@
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
- 0x82000000 0 0x40300000 0x40300000 0 0x400000>;
+ ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
+ <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 02afc6a42005..356e9535f7a6 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -326,6 +326,7 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pmicgpio 0 0 6>;
#gpio-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 65a994f0e09b..ec5cbc468bd3 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -295,6 +295,7 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pm8058_gpio 0 0 44>;
#gpio-cells = <2>;
};
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 8f5ea7add20f..ea1ca166165c 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -31,6 +31,7 @@
compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pma8084_gpios 0 0 22>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 8ee44a100e9a..ff24301dc1be 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -34,12 +34,23 @@
};
leds {
- status = "okay";
compatible = "gpio-leds";
led0 {
gpios = <&port7 1 GPIO_ACTIVE_LOW>;
};
+
+ led1 {
+ gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led3 {
+ gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>;
+ };
};
};
@@ -47,6 +58,34 @@
clock-frequency = <13330000>;
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ io_expander1: gpio@20 {
+ compatible = "onnn,cat9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ io_expander2: gpio@21 {
+ compatible = "onnn,cat9554";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "renesas,r1ex24016", "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
&usb_x1_clk {
clock-frequency = <48000000>;
};
@@ -56,6 +95,11 @@
};
&pinctrl {
+ /* RIIC ch3 (Port Expander, EEPROM (MAC Addr), Audio Codec) */
+ i2c3_pins: i2c3 {
+ pinmux = <RZA1_PINMUX(1, 6, 1)>, /* RIIC3SCL */
+ <RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */
+ };
/* Serial Console */
scif2_pins: serial2 {
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index d530f451467e..f70f4a3e5c43 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -166,6 +166,33 @@
};
&bsc {
+ flash@0 {
+ compatible = "cfi-flash", "mtd-rom";
+ reg = <0x0 0x08000000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "uboot-env";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "flash";
+ reg = <0x00080000 0x07f80000>;
+ };
+ };
+ };
+
ethernet@8000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x08000000 0x1000>;
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 77d18242ef59..2840eb0d6fd4 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -22,6 +22,17 @@
stdout-path = "serial1:115200n8";
};
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x20000000>;
@@ -80,10 +91,42 @@
status = "okay";
};
+&du {
+ pinctrl-0 = <&du0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <20000000>;
};
+&gpio2 {
+ interrupt-fixup {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ line-name = "hdmi-hpd-int";
+ input;
+ };
+};
+
+&hsusb0 {
+ status = "okay";
+};
+
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
@@ -97,12 +140,60 @@
};
};
+&i2c4 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ hdmi@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ bridge_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_gmii_tx_rx";
function = "avb";
};
+ du0_pins: du0 {
+ groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+ function = "du0";
+ };
+
+ i2c4_pins: i2c4 {
+ groups = "i2c4_e";
+ function = "i2c4";
+ };
+
i2c3_pins: i2c3 {
groups = "i2c3_c";
function = "i2c3";
@@ -135,6 +226,16 @@
function = "sdhi2";
power-source = <1800>;
};
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
};
&qspi0 {
@@ -195,3 +296,25 @@
sd-uhs-sdr50;
status = "okay";
};
+
+&usb2_phy0 {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usbphy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index f4e232bf9d03..56cb10b42ed9 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -325,6 +325,77 @@
status = "disabled";
};
+ hsusb0: hsusb@e6590000 {
+ compatible = "renesas,usbhs-r8a77470",
+ "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac00 0>, <&usb_dmac00 1>,
+ <&usb_dmac10 0>, <&usb_dmac10 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+ };
+
+ usbphy0: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a77470",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 704>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ };
+
+ hsusb1: hsusb@e6598000 {
+ compatible = "renesas,usbhs-r8a77470",
+ "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6598000 0 0x100>;
+ interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 706>;
+ dmas = <&usb_dmac01 0>, <&usb_dmac01 1>,
+ <&usb_dmac11 0>, <&usb_dmac11 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <4>;
+ /* We need to turn on usbphy0 to make usbphy1 to work */
+ phys = <&usb1 1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 706>;
+ status = "disabled";
+ };
+
+ usbphy1: usb-phy@e6598100 {
+ compatible = "renesas,usb-phy-r8a77470",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6598100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 706>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 706>;
+ status = "disabled";
+
+ usb1: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ };
+
usb_dmac00: dma-controller@e65a0000 {
compatible = "renesas,r8a77470-usb-dmac",
"renesas,usb-dmac";
@@ -588,6 +659,216 @@
status = "disabled";
};
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a77470",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a77470",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a77470",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62d0000 0 0x60>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 713>,
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a77470",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a77470",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
+ status = "disabled";
+ };
+
+ ohci0: usb@ee080000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb0 0>, <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ehci0: usb@ee080100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb0 0>, <&usb2_phy0>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a77470";
+ reg = <0 0xee080200 0 0x700>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ ohci1: usb@ee0c0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0c0000 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>;
+ phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ status = "disabled";
+ };
+
+ ehci1: usb@ee0c0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0c0100 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>;
+ phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@ee0c0200 {
+ compatible = "renesas,usb2-phy-r8a77470";
+ reg = <0 0xee0c0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 705>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
@@ -643,6 +924,38 @@
resets = <&cpg 408>;
};
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a77470";
+ reg = <0 0xfeb00000 0 0x40000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb0: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_rgb1: endpoint {
+ };
+ };
+ port@2 {
+ reg = <2>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@ff000044 {
compatible = "renesas,prr";
reg = <0 0xff000044 0 4>;
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index cecb22924ec4..0b49956069fc 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -25,7 +25,7 @@
};
chosen {
- bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index abc14e7a4c93..d4bee1ec9044 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=on";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index f92301290b02..b6fa80c3b07e 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -308,6 +308,26 @@
};
};
+&iic3 {
+ status = "okay";
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&irqc>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&du {
pinctrl-0 = <&du0_pins &du1_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 8e9eb4b704d3..38fb43d11b27 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -22,6 +22,7 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ i2c6 = &iic3;
spi0 = &qspi;
spi1 = &msiof0;
spi2 = &msiof1;
@@ -444,6 +445,23 @@
status = "disabled";
};
+ iic3: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7792",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7792",
"renesas,rcar-dmac";
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index ef7e2a837df6..0ab3d8d57f6d 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -199,6 +199,22 @@
};
};
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&usbphy {
+ status = "okay";
+};
+
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
@@ -293,6 +309,16 @@
function = "sdhi1";
power-source = <1800>;
};
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
};
&cmt0 {
@@ -377,6 +403,27 @@
pinctrl-names = "i2c-exio4";
};
+&i2c7 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&vin0 {
status = "okay";
pinctrl-0 = <&vin0_pins>;
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 0173eb11ec28..fb3cf005cc90 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -368,31 +368,31 @@
&pinctrl {
leds {
led_ctl: led-ctl {
- rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic-int {
- rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
sdio {
bt_wake_h: bt-wake-h {
- rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
sdmmc {
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sleep {
global_pwroff: global-pwroff {
- rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 59c90863b0e7..0290ea4edd32 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -551,71 +551,71 @@
pwm0 {
pwm0_pin: pwm0-pin {
- rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
- rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
- rockchip,pins = <0 1 2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
- rockchip,pins = <0 27 1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
};
sdmmc_cd: sdmmc-cd {
- rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
};
sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>;
};
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>,
- <1 19 RK_FUNC_1 &pcfg_pull_default>,
- <1 20 RK_FUNC_1 &pcfg_pull_default>,
- <1 21 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>,
+ <1 RK_PC3 1 &pcfg_pull_default>,
+ <1 RK_PC4 1 &pcfg_pull_default>,
+ <1 RK_PC5 1 &pcfg_pull_default>;
};
};
sdio {
sdio_bus1: sdio-bus1 {
- rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>;
};
sdio_bus4: sdio-bus4 {
- rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>,
- <0 12 RK_FUNC_1 &pcfg_pull_default>,
- <0 13 RK_FUNC_1 &pcfg_pull_default>,
- <0 14 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>,
+ <0 RK_PB4 1 &pcfg_pull_default>,
+ <0 RK_PB5 1 &pcfg_pull_default>,
+ <0 RK_PB6 1 &pcfg_pull_default>;
};
sdio_cmd: sdio-cmd {
- rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>;
};
sdio_clk: sdio-clk {
- rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>;
};
};
@@ -625,135 +625,135 @@
* We also have external pulls, so disable the internal ones.
*/
emmc_clk: emmc-clk {
- rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>;
};
emmc_bus8: emmc-bus8 {
- rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
- <1 25 RK_FUNC_2 &pcfg_pull_default>,
- <1 26 RK_FUNC_2 &pcfg_pull_default>,
- <1 27 RK_FUNC_2 &pcfg_pull_default>,
- <1 28 RK_FUNC_2 &pcfg_pull_default>,
- <1 29 RK_FUNC_2 &pcfg_pull_default>,
- <1 30 RK_FUNC_2 &pcfg_pull_default>,
- <1 31 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
+ <1 RK_PD1 2 &pcfg_pull_default>,
+ <1 RK_PD2 2 &pcfg_pull_default>,
+ <1 RK_PD3 2 &pcfg_pull_default>,
+ <1 RK_PD4 2 &pcfg_pull_default>,
+ <1 RK_PD5 2 &pcfg_pull_default>,
+ <1 RK_PD6 2 &pcfg_pull_default>,
+ <1 RK_PD7 2 &pcfg_pull_default>;
};
};
emac {
emac_xfer: emac-xfer {
- rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
- <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
- <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
- <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
- <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
- <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
- <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
- <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
+ rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */
+ <2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */
+ <2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */
+ <2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */
+ <2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */
+ <2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */
+ <2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */
+ <2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */
};
emac_mdio: emac-mdio {
- rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
- <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
+ rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */
+ <2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
- <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
+ <0 RK_PA1 1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
- <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
+ <0 RK_PA3 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
- rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
- <2 21 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>,
+ <2 RK_PC5 1 &pcfg_pull_none>;
};
};
i2s {
i2s_bus: i2s-bus {
- rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
- <1 1 RK_FUNC_1 &pcfg_pull_default>,
- <1 2 RK_FUNC_1 &pcfg_pull_default>,
- <1 3 RK_FUNC_1 &pcfg_pull_default>,
- <1 4 RK_FUNC_1 &pcfg_pull_default>,
- <1 5 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>,
+ <1 RK_PA1 1 &pcfg_pull_default>,
+ <1 RK_PA2 1 &pcfg_pull_default>,
+ <1 RK_PA3 1 &pcfg_pull_default>,
+ <1 RK_PA4 1 &pcfg_pull_default>,
+ <1 RK_PA5 1 &pcfg_pull_default>;
};
};
hdmi {
hdmi_ctl: hdmi-ctl {
- rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>,
- <1 9 RK_FUNC_1 &pcfg_pull_none>,
- <1 10 RK_FUNC_1 &pcfg_pull_none>,
- <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
+ <1 RK_PB1 1 &pcfg_pull_none>,
+ <1 RK_PB2 1 &pcfg_pull_none>,
+ <1 RK_PB3 1 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
- <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>,
+ <0 RK_PC1 1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
- rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>;
};
uart0_rts: uart0-rts {
- rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
- <2 23 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>,
+ <2 RK_PC7 1 &pcfg_pull_none>;
};
/* no rts / cts for uart1 */
};
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
- <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>,
+ <1 RK_PC3 2 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
};
spi-pins {
spi_txd:spi-txd {
- rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>;
};
spi_rxd:spi-rxd {
- rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>;
};
spi_clk:spi-clk {
- rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>;
};
spi_cs0:spi-cs0 {
- rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>;
};
spi_cs1:spi-cs1 {
- rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>;
};
};
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index ce525b956ae5..7e01f6406a86 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -168,7 +168,7 @@
&pinctrl {
lan8720a {
phy_int: phy-int {
- rockchip,pins = <RK_GPIO1 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index 9d2216d71f70..365eff621113 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -30,6 +30,17 @@
};
};
+ hdmi_con {
+ compatible = "hdmi-connector";
+ type = "c";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
vcc_io: vcc-io {
compatible = "regulator-fixed";
regulator-name = "vcc_io";
@@ -91,6 +102,20 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_in_vop1 {
+ status = "disabled";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mmc0 {
bus-width = <4>;
cap-mmc-highspeed;
@@ -111,25 +136,25 @@
&pinctrl {
usb-host {
host_drv: host-drv {
- rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
usb-otg {
otg_drv: otg-drv {
- rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
sdmmc {
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
sdio {
wifi_pwr: wifi-pwr {
- rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
@@ -150,6 +175,10 @@
status = "okay";
};
+&vop0 {
+ status = "okay";
+};
+
&wdt {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 949fa800582d..f9db6bb9fa11 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -322,71 +322,71 @@
ak8963 {
comp_int: comp-int {
- rockchip,pins = <4 17 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
emac {
rmii_rst: rmii-rst {
- rockchip,pins = <1 30 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>;
};
};
ir {
ir_int: ir-int {
- rockchip,pins = <6 1 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <6 RK_PA1 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
keys {
pwr_key: pwr-key {
- rockchip,pins = <6 2 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <6 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
mma8452 {
gsensor_int: gsensor-int {
- rockchip,pins = <4 16 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
mmc {
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <3 7 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
usb_host {
host_drv: host-drv {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
};
hub_rst: hub-rst {
- rockchip,pins = <1 31 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>;
};
sata_pwr: sata-pwr {
- rockchip,pins = <4 22 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_default>;
};
sata_reset: sata-reset {
- rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>;
};
};
usb_otg {
otg_drv: otg-drv {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
tps {
pmic_int: pmic-int {
- rockchip,pins = <6 4 RK_FUNC_GPIO &pcfg_pull_default>;
+ rockchip,pins = <6 RK_PA4 RK_FUNC_GPIO &pcfg_pull_default>;
};
pwr_hold: pwr-hold {
- rockchip,pins = <6 8 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <6 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 653127a377fa..3d1b02f45ffd 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -80,6 +80,11 @@
vop0_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
+ vop0_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vop0>;
+ };
};
};
@@ -101,6 +106,49 @@
vop1_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
+ vop1_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vop1>;
+ };
+ };
+ };
+
+ hdmi: hdmi@10116000 {
+ compatible = "rockchip,rk3066-hdmi";
+ reg = <0x10116000 0x2000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HDMI>;
+ clock-names = "hclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+ power-domains = <&power RK3066_PD_VIO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in_vop0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vop0_out_hdmi>;
+ };
+
+ hdmi_in_vop1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vop1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
@@ -343,33 +391,33 @@
emac {
emac_xfer: emac-xfer {
- rockchip,pins = <RK_GPIO1 16 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */
- <RK_GPIO1 17 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */
- <RK_GPIO1 18 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */
- <RK_GPIO1 19 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */
- <RK_GPIO1 20 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */
- <RK_GPIO1 21 RK_FUNC_2 &pcfg_pull_none>, /* crs_dvalid */
- <RK_GPIO1 22 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */
- <RK_GPIO1 23 RK_FUNC_2 &pcfg_pull_none>; /* rxd0 */
+ rockchip,pins = <1 RK_PC0 2 &pcfg_pull_none>, /* mac_clk */
+ <1 RK_PC1 2 &pcfg_pull_none>, /* tx_en */
+ <1 RK_PC2 2 &pcfg_pull_none>, /* txd1 */
+ <1 RK_PC3 2 &pcfg_pull_none>, /* txd0 */
+ <1 RK_PC4 2 &pcfg_pull_none>, /* rx_err */
+ <1 RK_PC5 2 &pcfg_pull_none>, /* crs_dvalid */
+ <1 RK_PC6 2 &pcfg_pull_none>, /* rxd1 */
+ <1 RK_PC7 2 &pcfg_pull_none>; /* rxd0 */
};
emac_mdio: emac-mdio {
- rockchip,pins = <RK_GPIO1 24 RK_FUNC_2 &pcfg_pull_none>, /* mac_md */
- <RK_GPIO1 25 RK_FUNC_2 &pcfg_pull_none>; /* mac_mdclk */
+ rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>, /* mac_md */
+ <1 RK_PD1 2 &pcfg_pull_none>; /* mac_mdclk */
};
};
emmc {
emmc_clk: emmc-clk {
- rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PD7 2 &pcfg_pull_default>;
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <4 RK_PB1 2 &pcfg_pull_default>;
};
emmc_rst: emmc-rst {
- rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <4 RK_PB2 2 &pcfg_pull_default>;
};
/*
@@ -380,245 +428,256 @@
*/
};
+ hdmi {
+ hdmi_hpd: hdmi-hpd {
+ rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+ };
+
+ hdmii2c_xfer: hdmii2c-xfer {
+ rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+ <0 RK_PA2 1 &pcfg_pull_none>;
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD4 1 &pcfg_pull_none>,
+ <2 RK_PD5 1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD6 1 &pcfg_pull_none>,
+ <2 RK_PD7 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
- rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none>,
+ <3 RK_PA1 1 &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
- rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>,
- <RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA2 2 &pcfg_pull_none>,
+ <3 RK_PA3 2 &pcfg_pull_none>;
};
};
i2c4 {
i2c4_xfer: i2c4-xfer {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>,
+ <3 RK_PA5 1 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_out: pwm0-out {
- rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_out: pwm1-out {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_out: pwm2-out {
- rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_out: pwm3-out {
- rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>;
};
};
spi0 {
spi0_clk: spi0-clk {
- rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA5 2 &pcfg_pull_default>;
};
spi0_cs0: spi0-cs0 {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA4 2 &pcfg_pull_default>;
};
spi0_tx: spi0-tx {
- rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA7 2 &pcfg_pull_default>;
};
spi0_rx: spi0-rx {
- rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA6 2 &pcfg_pull_default>;
};
spi0_cs1: spi0-cs1 {
- rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <4 RK_PB7 1 &pcfg_pull_default>;
};
};
spi1 {
spi1_clk: spi1-clk {
- rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <2 RK_PC3 2 &pcfg_pull_default>;
};
spi1_cs0: spi1-cs0 {
- rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <2 RK_PC4 2 &pcfg_pull_default>;
};
spi1_rx: spi1-rx {
- rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <2 RK_PC6 2 &pcfg_pull_default>;
};
spi1_tx: spi1-tx {
- rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <2 RK_PC5 2 &pcfg_pull_default>;
};
spi1_cs1: spi1-cs1 {
- rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>;
+ rockchip,pins = <2 RK_PC7 2 &pcfg_pull_default>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>,
+ <1 RK_PA1 1 &pcfg_pull_default>;
};
uart0_cts: uart0-cts {
- rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA2 1 &pcfg_pull_default>;
};
uart0_rts: uart0-rts {
- rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA3 1 &pcfg_pull_default>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA4 1 &pcfg_pull_default>,
+ <1 RK_PA5 1 &pcfg_pull_default>;
};
uart1_cts: uart1-cts {
- rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA6 1 &pcfg_pull_default>;
};
uart1_rts: uart1-rts {
- rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
+ <1 RK_PB1 1 &pcfg_pull_default>;
};
/* no rts / cts for uart2 */
};
uart3 {
uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PD3 1 &pcfg_pull_default>,
+ <3 RK_PD4 1 &pcfg_pull_default>;
};
uart3_cts: uart3-cts {
- rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PD5 1 &pcfg_pull_default>;
};
uart3_rts: uart3-rts {
- rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PD6 1 &pcfg_pull_default>;
};
};
sd0 {
sd0_clk: sd0-clk {
- rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PB0 1 &pcfg_pull_default>;
};
sd0_cmd: sd0-cmd {
- rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PB1 1 &pcfg_pull_default>;
};
sd0_cd: sd0-cd {
- rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PB6 1 &pcfg_pull_default>;
};
sd0_wp: sd0-wp {
- rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PB7 1 &pcfg_pull_default>;
};
sd0_bus1: sd0-bus-width1 {
- rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>;
};
sd0_bus4: sd0-bus-width4 {
- rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>,
+ <3 RK_PB3 1 &pcfg_pull_default>,
+ <3 RK_PB4 1 &pcfg_pull_default>,
+ <3 RK_PB5 1 &pcfg_pull_default>;
};
};
sd1 {
sd1_clk: sd1-clk {
- rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PC5 1 &pcfg_pull_default>;
};
sd1_cmd: sd1-cmd {
- rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PC0 1 &pcfg_pull_default>;
};
sd1_cd: sd1-cd {
- rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PC6 1 &pcfg_pull_default>;
};
sd1_wp: sd1-wp {
- rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PC7 1 &pcfg_pull_default>;
};
sd1_bus1: sd1-bus-width1 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>;
};
sd1_bus4: sd1-bus-width4 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>,
+ <3 RK_PC2 1 &pcfg_pull_default>,
+ <3 RK_PC3 1 &pcfg_pull_default>,
+ <3 RK_PC4 1 &pcfg_pull_default>;
};
};
i2s0 {
i2s0_bus: i2s0-bus {
- rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PA7 1 &pcfg_pull_default>,
+ <0 RK_PB0 1 &pcfg_pull_default>,
+ <0 RK_PB1 1 &pcfg_pull_default>,
+ <0 RK_PB2 1 &pcfg_pull_default>,
+ <0 RK_PB3 1 &pcfg_pull_default>,
+ <0 RK_PB4 1 &pcfg_pull_default>,
+ <0 RK_PB5 1 &pcfg_pull_default>,
+ <0 RK_PB6 1 &pcfg_pull_default>,
+ <0 RK_PB7 1 &pcfg_pull_default>;
};
};
i2s1 {
i2s1_bus: i2s1-bus {
- rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>,
+ <0 RK_PC1 1 &pcfg_pull_default>,
+ <0 RK_PC2 1 &pcfg_pull_default>,
+ <0 RK_PC3 1 &pcfg_pull_default>,
+ <0 RK_PC4 1 &pcfg_pull_default>,
+ <0 RK_PC5 1 &pcfg_pull_default>;
};
};
i2s2 {
i2s2_bus: i2s2-bus {
- rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
+ rockchip,pins = <0 RK_PD0 1 &pcfg_pull_default>,
+ <0 RK_PD1 1 &pcfg_pull_default>,
+ <0 RK_PD2 1 &pcfg_pull_default>,
+ <0 RK_PD3 1 &pcfg_pull_default>,
+ <0 RK_PD4 1 &pcfg_pull_default>,
+ <0 RK_PD5 1 &pcfg_pull_default>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index c0eaa9c5490b..c32e1d441cf7 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -247,10 +247,10 @@
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 94bc81c24049..c9a7f5409960 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -307,40 +307,40 @@
act8846 {
act8846_dvs0_ctl: act8846-dvs0-ctl {
- rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
+ rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
};
};
hym8563 {
rtc_int: rtc-int {
- rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
lan8720a {
phy_int: phy-int {
- rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
ir-receiver {
ir_recv_pin: ir-recv-pin {
- rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sd0 {
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 3ed49898f4b2..10ede65d90f3 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -315,15 +315,15 @@
emmc {
emmc_clk: emmc-clk {
- rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD0 2 &pcfg_pull_none>;
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PD2 2 &pcfg_pull_up>;
};
emmc_rst: emmc-rst {
- rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD3 2 &pcfg_pull_none>;
};
/*
@@ -336,291 +336,291 @@
emac {
emac_xfer: emac-xfer {
- rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */
- <RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */
- <RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */
- <RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, /* rxd0 */
- <RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */
- <RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */
- <RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */
- <RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; /* crs_dvalid */
+ rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>, /* tx_en */
+ <3 RK_PC1 2 &pcfg_pull_none>, /* txd1 */
+ <3 RK_PC2 2 &pcfg_pull_none>, /* txd0 */
+ <3 RK_PC3 2 &pcfg_pull_none>, /* rxd0 */
+ <3 RK_PC4 2 &pcfg_pull_none>, /* rxd1 */
+ <3 RK_PC5 2 &pcfg_pull_none>, /* mac_clk */
+ <3 RK_PC6 2 &pcfg_pull_none>, /* rx_err */
+ <3 RK_PC7 2 &pcfg_pull_none>; /* crs_dvalid */
};
emac_mdio: emac-mdio {
- rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>,
- <RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>,
+ <3 RK_PD1 2 &pcfg_pull_none>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
+ <1 RK_PD1 1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>,
+ <1 RK_PD3 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
- rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>,
+ <1 RK_PD5 1 &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
- rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>,
- <RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PB6 2 &pcfg_pull_none>,
+ <3 RK_PB7 2 &pcfg_pull_none>;
};
};
i2c4 {
i2c4_xfer: i2c4-xfer {
- rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD6 1 &pcfg_pull_none>,
+ <1 RK_PD7 1 &pcfg_pull_none>;
};
};
lcdc1 {
lcdc1_dclk: lcdc1-dclk {
- rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>;
};
lcdc1_den: lcdc1-den {
- rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none>;
};
lcdc1_hsync: lcdc1-hsync {
- rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>;
};
lcdc1_vsync: lcdc1-vsync {
- rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
};
lcdc1_rgb24: ldcd1-rgb24 {
- rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>,
- <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
+ <2 RK_PA1 1 &pcfg_pull_none>,
+ <2 RK_PA2 1 &pcfg_pull_none>,
+ <2 RK_PA3 1 &pcfg_pull_none>,
+ <2 RK_PA4 1 &pcfg_pull_none>,
+ <2 RK_PA5 1 &pcfg_pull_none>,
+ <2 RK_PA6 1 &pcfg_pull_none>,
+ <2 RK_PA7 1 &pcfg_pull_none>,
+ <2 RK_PB0 1 &pcfg_pull_none>,
+ <2 RK_PB1 1 &pcfg_pull_none>,
+ <2 RK_PB2 1 &pcfg_pull_none>,
+ <2 RK_PB3 1 &pcfg_pull_none>,
+ <2 RK_PB4 1 &pcfg_pull_none>,
+ <2 RK_PB5 1 &pcfg_pull_none>,
+ <2 RK_PB6 1 &pcfg_pull_none>,
+ <2 RK_PB7 1 &pcfg_pull_none>,
+ <2 RK_PC0 1 &pcfg_pull_none>,
+ <2 RK_PC1 1 &pcfg_pull_none>,
+ <2 RK_PC2 1 &pcfg_pull_none>,
+ <2 RK_PC3 1 &pcfg_pull_none>,
+ <2 RK_PC4 1 &pcfg_pull_none>,
+ <2 RK_PC5 1 &pcfg_pull_none>,
+ <2 RK_PC6 1 &pcfg_pull_none>,
+ <2 RK_PC7 1 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_out: pwm0-out {
- rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_out: pwm1-out {
- rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD4 1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_out: pwm2-out {
- rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD5 1 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_out: pwm3-out {
- rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD6 1 &pcfg_pull_none>;
};
};
spi0 {
spi0_clk: spi0-clk {
- rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PA6 2 &pcfg_pull_up>;
};
spi0_cs0: spi0-cs0 {
- rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PA7 2 &pcfg_pull_up>;
};
spi0_tx: spi0-tx {
- rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PA5 2 &pcfg_pull_up>;
};
spi0_rx: spi0-rx {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PA4 2 &pcfg_pull_up>;
};
spi0_cs1: spi0-cs1 {
- rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PB7 1 &pcfg_pull_up>;
};
};
spi1 {
spi1_clk: spi1-clk {
- rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PD6 1 &pcfg_pull_up>;
};
spi1_cs0: spi1-cs0 {
- rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PD7 1 &pcfg_pull_up>;
};
spi1_rx: spi1-rx {
- rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PD4 1 &pcfg_pull_up>;
};
spi1_tx: spi1-tx {
- rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PD5 1 &pcfg_pull_up>;
};
spi1_cs1: spi1-cs1 {
- rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up>,
+ <1 RK_PA1 1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
- rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA2 1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
- rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA3 1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up>,
+ <1 RK_PA5 1 &pcfg_pull_none>;
};
uart1_cts: uart1-cts {
- rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
};
uart1_rts: uart1-rts {
- rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA7 1 &pcfg_pull_none>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB0 1 &pcfg_pull_up>,
+ <1 RK_PB1 1 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
};
uart3 {
uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB2 1 &pcfg_pull_up>,
+ <1 RK_PB3 1 &pcfg_pull_none>;
};
uart3_cts: uart3-cts {
- rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none>;
};
uart3_rts: uart3-rts {
- rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB5 1 &pcfg_pull_none>;
};
};
sd0 {
sd0_clk: sd0-clk {
- rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none>;
};
sd0_cmd: sd0-cmd {
- rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>;
};
sd0_cd: sd0-cd {
- rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PB0 1 &pcfg_pull_none>;
};
sd0_wp: sd0-wp {
- rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PB1 1 &pcfg_pull_none>;
};
sd0_pwr: sd0-pwr {
- rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>;
};
sd0_bus1: sd0-bus-width1 {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>;
};
sd0_bus4: sd0-bus-width4 {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>,
+ <3 RK_PA5 1 &pcfg_pull_none>,
+ <3 RK_PA6 1 &pcfg_pull_none>,
+ <3 RK_PA7 1 &pcfg_pull_none>;
};
};
sd1 {
sd1_clk: sd1-clk {
- rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC5 1 &pcfg_pull_none>;
};
sd1_cmd: sd1-cmd {
- rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC0 1 &pcfg_pull_none>;
};
sd1_cd: sd1-cd {
- rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>;
};
sd1_wp: sd1-wp {
- rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC7 1 &pcfg_pull_none>;
};
sd1_bus1: sd1-bus-width1 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC1 1 &pcfg_pull_none>;
};
sd1_bus4: sd1-bus-width4 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC1 1 &pcfg_pull_none>,
+ <3 RK_PC2 1 &pcfg_pull_none>,
+ <3 RK_PC3 1 &pcfg_pull_none>,
+ <3 RK_PC4 1 &pcfg_pull_none>;
};
};
i2s0 {
i2s0_bus: i2s0-bus {
- rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>,
+ <1 RK_PC1 1 &pcfg_pull_none>,
+ <1 RK_PC2 1 &pcfg_pull_none>,
+ <1 RK_PC3 1 &pcfg_pull_none>,
+ <1 RK_PC4 1 &pcfg_pull_none>,
+ <1 RK_PC5 1 &pcfg_pull_none>;
};
};
spdif {
spdif_tx: spdif-tx {
- rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB6 1 &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 29f19076dceb..da102fff96a2 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -865,228 +865,228 @@
emmc {
emmc_clk: emmc-clk {
- rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>;
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC6 2 &pcfg_pull_none>;
};
emmc_bus8: emmc-bus8 {
- rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
- <1 25 RK_FUNC_2 &pcfg_pull_none>,
- <1 26 RK_FUNC_2 &pcfg_pull_none>,
- <1 27 RK_FUNC_2 &pcfg_pull_none>,
- <1 28 RK_FUNC_2 &pcfg_pull_none>,
- <1 29 RK_FUNC_2 &pcfg_pull_none>,
- <1 30 RK_FUNC_2 &pcfg_pull_none>,
- <1 31 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>,
+ <1 RK_PD1 2 &pcfg_pull_none>,
+ <1 RK_PD2 2 &pcfg_pull_none>,
+ <1 RK_PD3 2 &pcfg_pull_none>,
+ <1 RK_PD4 2 &pcfg_pull_none>,
+ <1 RK_PD5 2 &pcfg_pull_none>,
+ <1 RK_PD6 2 &pcfg_pull_none>,
+ <1 RK_PD7 2 &pcfg_pull_none>;
};
};
gmac {
rgmii_pins: rgmii-pins {
- rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
- <2 12 RK_FUNC_1 &pcfg_pull_none>,
- <2 25 RK_FUNC_1 &pcfg_pull_none>,
- <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
- <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
- <2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
- <2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
- <2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
- <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
- <2 17 RK_FUNC_1 &pcfg_pull_none>,
- <2 16 RK_FUNC_1 &pcfg_pull_none>,
- <2 21 RK_FUNC_2 &pcfg_pull_none>,
- <2 20 RK_FUNC_2 &pcfg_pull_none>,
- <2 11 RK_FUNC_1 &pcfg_pull_none>,
- <2 8 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none>,
+ <2 RK_PB4 1 &pcfg_pull_none>,
+ <2 RK_PD1 1 &pcfg_pull_none>,
+ <2 RK_PC3 1 &pcfg_pull_none_drv_12ma>,
+ <2 RK_PC2 1 &pcfg_pull_none_drv_12ma>,
+ <2 RK_PC6 1 &pcfg_pull_none_drv_12ma>,
+ <2 RK_PC7 1 &pcfg_pull_none_drv_12ma>,
+ <2 RK_PB1 1 &pcfg_pull_none_drv_12ma>,
+ <2 RK_PB5 1 &pcfg_pull_none_drv_12ma>,
+ <2 RK_PC1 1 &pcfg_pull_none>,
+ <2 RK_PC0 1 &pcfg_pull_none>,
+ <2 RK_PC5 2 &pcfg_pull_none>,
+ <2 RK_PC4 2 &pcfg_pull_none>,
+ <2 RK_PB3 1 &pcfg_pull_none>,
+ <2 RK_PB0 1 &pcfg_pull_none>;
};
rmii_pins: rmii-pins {
- rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
- <2 12 RK_FUNC_1 &pcfg_pull_none>,
- <2 25 RK_FUNC_1 &pcfg_pull_none>,
- <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
- <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
- <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
- <2 17 RK_FUNC_1 &pcfg_pull_none>,
- <2 16 RK_FUNC_1 &pcfg_pull_none>,
- <2 8 RK_FUNC_1 &pcfg_pull_none>,
- <2 15 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none>,
+ <2 RK_PB4 1 &pcfg_pull_none>,
+ <2 RK_PD1 1 &pcfg_pull_none>,
+ <2 RK_PC3 1 &pcfg_pull_none_drv_12ma>,
+ <2 RK_PC2 1 &pcfg_pull_none_drv_12ma>,
+ <2 RK_PB5 1 &pcfg_pull_none_drv_12ma>,
+ <2 RK_PC1 1 &pcfg_pull_none>,
+ <2 RK_PC0 1 &pcfg_pull_none>,
+ <2 RK_PB0 1 &pcfg_pull_none>,
+ <2 RK_PB7 1 &pcfg_pull_none>;
};
phy_pins: phy-pins {
- rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>,
- <2 8 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB6 2 &pcfg_pull_none>,
+ <2 RK_PB0 2 &pcfg_pull_none>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
- <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
+ <0 RK_PA1 1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
- <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
+ <0 RK_PA3 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
- rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
- <2 21 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>,
+ <2 RK_PC5 1 &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
- rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
- <0 7 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
+ <0 RK_PA7 1 &pcfg_pull_none>;
};
};
spi-0 {
spi0_clk: spi0-clk {
- rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
};
spi0_cs0: spi0-cs0 {
- rockchip,pins = <0 14 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB6 2 &pcfg_pull_up>;
};
spi0_tx: spi0-tx {
- rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>;
};
spi0_rx: spi0-rx {
- rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>;
};
spi0_cs1: spi0-cs1 {
- rockchip,pins = <1 12 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PB4 1 &pcfg_pull_up>;
};
};
spi-1 {
spi1_clk: spi1-clk {
- rockchip,pins = <0 23 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
};
spi1_cs0: spi1-cs0 {
- rockchip,pins = <2 2 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PA2 2 &pcfg_pull_up>;
};
spi1_rx: spi1-rx {
- rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up>;
};
spi1_tx: spi1-tx {
- rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PA1 2 &pcfg_pull_up>;
};
spi1_cs1: spi1-cs1 {
- rockchip,pins = <2 3 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PA3 2 &pcfg_pull_up>;
};
};
i2s1 {
i2s1_bus: i2s1-bus {
- rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>,
- <0 9 RK_FUNC_1 &pcfg_pull_none>,
- <0 11 RK_FUNC_1 &pcfg_pull_none>,
- <0 12 RK_FUNC_1 &pcfg_pull_none>,
- <0 13 RK_FUNC_1 &pcfg_pull_none>,
- <0 14 RK_FUNC_1 &pcfg_pull_none>,
- <1 2 RK_FUNC_2 &pcfg_pull_none>,
- <1 4 RK_FUNC_2 &pcfg_pull_none>,
- <1 5 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB0 1 &pcfg_pull_none>,
+ <0 RK_PB1 1 &pcfg_pull_none>,
+ <0 RK_PB3 1 &pcfg_pull_none>,
+ <0 RK_PB4 1 &pcfg_pull_none>,
+ <0 RK_PB5 1 &pcfg_pull_none>,
+ <0 RK_PB6 1 &pcfg_pull_none>,
+ <1 RK_PA2 2 &pcfg_pull_none>,
+ <1 RK_PA4 2 &pcfg_pull_none>,
+ <1 RK_PA5 2 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_pin: pwm0-pin {
- rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC5 1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
- rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
- rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB4 2 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
- rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>;
};
};
spdif {
spdif_tx: spdif-tx {
- rockchip,pins = <3 31 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD7 2 &pcfg_pull_none>;
};
};
tsadc {
otp_gpio: otp-gpio {
- rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
otp_out: otp-out {
- rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD0 2 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
- <2 27 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>,
+ <2 RK_PD3 1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
- rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD5 1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
- rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC1 1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
- <1 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>,
+ <1 RK_PB2 1 &pcfg_pull_none>;
};
uart1_cts: uart1-cts {
- rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>;
};
uart1_rts: uart1-rts {
- rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>,
- <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+ <1 RK_PC3 2 &pcfg_pull_none>;
};
uart21_xfer: uart21-xfer {
- rockchip,pins = <1 10 RK_FUNC_2 &pcfg_pull_up>,
- <1 9 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB2 2 &pcfg_pull_up>,
+ <1 RK_PB1 2 &pcfg_pull_none>;
};
uart2_cts: uart2-cts {
- rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD1 1 &pcfg_pull_none>;
};
uart2_rts: uart2-rts {
- rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD0 1 &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 6592c809e2a5..80080767c365 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -175,13 +175,13 @@
&pinctrl {
lcd {
lcd_en: lcd-en {
- rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wifi {
wifi_pwr: wifi-pwr {
- rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 97e4d552ff0f..820440715302 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -314,25 +314,25 @@
backlight {
bl_en: bl-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buttons {
pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
lcd {
lcd_cs: lcd-cs {
- rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
@@ -342,34 +342,34 @@
* high-speed mode on EVB board so bump up to 8ma.
*/
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
+ <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
+ <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
+ <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
};
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
};
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
eth_phy {
eth_phy_pwr: eth-phy-pwr {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts
index 29af26e6d442..4847cf902a15 100644
--- a/arch/arm/boot/dts/rk3288-fennec.dts
+++ b/arch/arm/boot/dts/rk3288-fennec.dts
@@ -278,27 +278,27 @@
gmac {
phy_int: phy-int {
- rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_pmeb: phy-pmeb {
- rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
- rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
pmic {
pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usbphy {
host_drv: host-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts
index 0f3c29d7fbab..135e8832141f 100644
--- a/arch/arm/boot/dts/rk3288-firefly-beta.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts
@@ -18,13 +18,13 @@
&pinctrl {
act8846 {
pmic_vsel: pmic-vsel {
- rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+ rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>;
};
};
ir {
ir_int: ir-int {
- rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
index f57f286a93c3..61435d8ee37b 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -224,25 +224,25 @@
act8846 {
pwr_hold: pwr-hold {
- rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
};
pmic_vsel: pmic-vsel {
- rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
+ rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_output_low>;
};
};
gmac {
phy_int: phy-int {
- rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_pmeb: phy-pmeb {
- rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
- rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 3a646c5f4fcf..1574383fd2dc 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -306,39 +306,39 @@
&pinctrl {
ir {
ir_int: ir-int {
- rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
dvp {
dvp_pwr: dvp-pwr {
- rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
cif_pwr: cif-pwr {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hym8563 {
rtc_int: rtc-int {
- rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
keys {
pwr_key: pwr-key {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
power_led: power-led {
- rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
work_led: work-led {
- rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -348,44 +348,44 @@
* high-speed mode on firefly board so bump up to 12ma.
*/
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+ rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio {
wifi_enable: wifi-enable {
- rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_host {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
usbhub_rst: usbhub-rst {
- rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
};
};
usb_otg {
otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts
index 556ab42dd81c..313459dab2e4 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dts
+++ b/arch/arm/boot/dts/rk3288-firefly.dts
@@ -18,13 +18,13 @@
&pinctrl {
act8846 {
pmic_vsel: pmic-vsel {
- rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
+ rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_output_low>;
};
};
ir {
ir_int: ir-int {
- rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index a6ff7eac4aa8..5e0a19004e46 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -392,49 +392,49 @@
act8846 {
pwr_hold: pwr-hold {
- rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
};
};
dvp {
dvp_pwr: dvp-pwr {
- rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gmac {
phy_int: phy-int {
- rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_pmeb: phy-pmeb {
- rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
- rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
hym8563 {
rtc_int: rtc-int {
- rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
keys {
pwr_key: pwr-key {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
power_led: power-led {
- rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
work_led: work-led {
- rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -444,38 +444,38 @@
* high-speed mode on firefly board so bump up to 12ma.
*/
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+ rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_host {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
usbhub_rst: usbhub-rst {
- rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
};
};
usb_otg {
otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index fb7365b604bb..c41d012c8850 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -296,29 +296,29 @@
act8846 {
pmic_int: pmic-int {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
pmic_sleep: pmic-sleep {
- rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>;
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_output_low>;
};
pmic_vsel: pmic-vsel {
- rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+ rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>;
};
};
gmac {
phy_int: phy-int {
- rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_pmeb: phy-pmeb {
- rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
- rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
@@ -328,28 +328,28 @@
* high-speed mode on firefly board so bump up to 12ma.
*/
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+ rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_host {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
index 7077c3403483..1e33859de484 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -160,15 +160,15 @@
buttons {
user_button_pins: user-button-pins {
/* button 1 */
- rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>,
+ rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
/* button 2 */
- <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
rv4162 {
i2c_rtc_int: i2c-rtc-int {
- rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
@@ -178,44 +178,44 @@
* high-speed mode on pcm-947 board so bump up to 12 mA.
*/
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
+ <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+ rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
touchscreen {
ts_irq_pin: ts-irq-pin {
- rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_host {
host0_vbus_drv: host0-vbus-drv {
- rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
host1_vbus_drv: host1-vbus-drv {
- rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_otg {
otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
index c218dd54c9b5..77a47b9b756d 100644
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -342,49 +342,49 @@
* We also have external pulls, so disable the internal ones.
*/
emmc_clk: emmc-clk {
- rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_12ma>;
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_12ma>;
};
emmc_bus8: emmc-bus8 {
- rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 2 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 3 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 4 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 5 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 6 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 7 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_12ma>,
+ <3 RK_PA1 2 &pcfg_pull_none_12ma>,
+ <3 RK_PA2 2 &pcfg_pull_none_12ma>,
+ <3 RK_PA3 2 &pcfg_pull_none_12ma>,
+ <3 RK_PA4 2 &pcfg_pull_none_12ma>,
+ <3 RK_PA5 2 &pcfg_pull_none_12ma>,
+ <3 RK_PA6 2 &pcfg_pull_none_12ma>,
+ <3 RK_PA7 2 &pcfg_pull_none_12ma>;
};
};
gmac {
phy_int: phy-int {
- rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
- rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
leds {
user_led: user-led {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
};
};
pmic {
pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
/* Pin for switching state between sleep and non-sleep state */
pmic_sleep: pmic-sleep {
- rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 28972fb4e221..a6ffc381abaa 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -265,39 +265,39 @@
act8846 {
pmic_vsel: pmic-vsel {
- rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+ rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>;
};
pwr_hold: pwr-hold {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_output_high>;
};
};
buttons {
pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
ir {
ir_int: ir-int {
- rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 32e1ab336662..9f9e2bfd1295 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -231,13 +231,13 @@
emmc {
emmc_reset: emmc-reset {
- rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gmac {
phy_rst: phy-rst {
- rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 5b7e1c9e92e1..cdcdc921ee09 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -204,53 +204,53 @@
&pinctrl {
ir {
ir_int: ir-int {
- rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
keys {
pwr_key: pwr-key {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
pmic_int: pmic-int {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
headphone {
hp_det: hp-det {
- rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
};
phone_ctl: phone-ctl {
- rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sata {
sata_pwr_en: sata-pwr-en {
- rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio {
wifi_enable: wifi-enable {
- rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts
index d97da89bcd51..970e13859198 100644
--- a/arch/arm/boot/dts/rk3288-tinker-s.dts
+++ b/arch/arm/boot/dts/rk3288-tinker-s.dts
@@ -23,3 +23,8 @@
mmc-ddr-1_8v;
status = "okay";
};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec_c0>;
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index ef653c3209bc..293576869546 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -5,6 +5,7 @@
#include "rk3288.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/rockchip,rk808.h>
/ {
chosen {
@@ -61,6 +62,16 @@
};
};
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 RK808_CLKOUT1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable>;
+ reset-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_LOW>,
+ <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -338,6 +349,7 @@
status = "okay";
sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vcc_18>;
};
&pinctrl {
@@ -352,68 +364,75 @@
backlight {
bl_en: bl-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buttons {
pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
eth_phy {
eth_phy_pwr: eth-phy-pwr {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO \
&pcfg_pull_up>;
};
dvs_1: dvs-1 {
- rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO \
&pcfg_pull_down>;
};
dvs_2: dvs-2 {
- rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO \
&pcfg_pull_down>;
};
};
sdmmc {
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
+ <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
+ <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
+ <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
};
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 \
+ rockchip,pins = <6 RK_PC4 1 \
&pcfg_pull_none_drv_8ma>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
};
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
pwr_3g: pwr-3g {
- rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio {
+ wifi_enable: wifi-enable {
+ rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
@@ -440,6 +459,24 @@
vqmmc-supply = <&vccio_sd>;
};
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <50000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_18>;
+ status = "okay";
+};
+
&tsadc {
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
index eaf921694e68..445270aa136e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
@@ -73,7 +73,7 @@
&pinctrl {
codec {
hp_det: hp-det {
- rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <6 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
/*
@@ -82,17 +82,17 @@
* we've got a ts3a227e chip but the driver requires it.
*/
int_codec: int-codec {
- rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <6 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
};
mic_det: mic-det {
- rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <6 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
headset {
ts3a227e_int_l: ts3a227e-int-l {
- rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
index 5c94a33d695d..406146cbff29 100644
--- a/arch/arm/boot/dts/rk3288-veyron-brain.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -42,23 +42,23 @@
&pinctrl {
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
usb-host {
usb2_pwr_en: usb2-pwr-en {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index b54746df3661..fbef34578100 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -176,8 +176,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
+ regulator-off-in-suspend;
};
};
};
@@ -229,6 +228,8 @@
&pinctrl {
pinctrl-0 = <
/* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
&global_pwroff
/* Wake only */
@@ -236,6 +237,8 @@
>;
pinctrl-1 = <
/* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
&global_pwroff
/* Sleep only */
@@ -244,51 +247,51 @@
backlight {
bl_en: bl-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buttons {
ap_lid_int_l: ap-lid-int-l {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
charger {
ac_present_ap: ac-present-ap {
- rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
cros-ec {
ec_int: ec-int {
- rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
suspend {
suspend_l_wake: suspend-l-wake {
- rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>;
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
};
suspend_l_sleep: suspend-l-sleep {
- rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_high>;
};
};
trackpad {
trackpad_int: trackpad-int {
- rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb-host {
host1_pwr_en: host1-pwr-en {
- rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
usbotg_pwren_h: usbotg-pwren-h {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index 9d6814c7f285..e248f55ee8d2 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -138,39 +138,39 @@
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buck-5v {
drv_5v: drv-5v {
- rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
lcd {
lcd_enable_h: lcd-en {
- rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index 2ba89895c33a..b1613af83d5d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -11,7 +11,10 @@
/ {
model = "Google Jerry";
- compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+ compatible = "google,veyron-jerry-rev15", "google,veyron-jerry-rev14",
+ "google,veyron-jerry-rev13", "google,veyron-jerry-rev12",
+ "google,veyron-jerry-rev11", "google,veyron-jerry-rev10",
+ "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
"google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
@@ -61,7 +64,9 @@
&rk808 {
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+ <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
regulators {
mic_vcc: LDO_REG2 {
@@ -101,39 +106,39 @@
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buck-5v {
drv_5v: drv-5v {
- rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
lcd {
lcd_enable_h: lcd-en {
- rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index d889ab3c8235..e852594417b5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -186,17 +186,17 @@
&pinctrl {
hdmi {
power_hdmi_on: power-hdmi-on {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-mighty.dts b/arch/arm/boot/dts/rk3288-veyron-mighty.dts
new file mode 100644
index 000000000000..27fbc07476d2
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-mighty.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Mighty Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "rk3288-veyron-jaq.dts"
+
+/ {
+ model = "Google Mighty";
+ compatible = "google,veyron-mighty-rev5", "google,veyron-mighty-rev4",
+ "google,veyron-mighty-rev3", "google,veyron-mighty-rev2",
+ "google,veyron-mighty-rev1", "google,veyron-mighty",
+ "google,veyron", "rockchip,rk3288";
+};
+
+&sdmmc {
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ &sdmmc_wp_gpio &sdmmc_bus4>;
+ wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+
+ /delete-property/ disable-wp;
+};
+
+&pinctrl {
+ sdmmc {
+ sdmmc_wp_gpio: sdmmc-wp-gpio {
+ rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index f95d0c5fcf71..468a1818545d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -191,65 +191,65 @@
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buck-5v {
drv_5v: drv-5v {
- rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buttons {
volum_down_l: volum-down-l {
- rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
};
volum_up_l: volum-up-l {
- rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
lcd {
lcd_enable_h: lcd-en {
- rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
prochot {
gpio_prochot: gpio-prochot {
- rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
touchscreen {
touch_int: touch-int {
- rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
touch_rst: touch-rst {
- rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 2950aadf49f0..9645be7b3d8c 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -55,19 +55,19 @@
&pinctrl {
buttons {
pwr_key_h: pwr-key-h {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
emmc {
emmc_reset: emmc-reset {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdmmc {
sdmmc_wp_gpio: sdmmc-wp-gpio {
- rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
index a4570444cc79..fe950f9863e8 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -16,18 +16,18 @@
* We also have external pulls, so disable the internal ones.
*/
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <6 RK_PC0 1 &pcfg_pull_none_drv_8ma>,
+ <6 RK_PC1 1 &pcfg_pull_none_drv_8ma>,
+ <6 RK_PC2 1 &pcfg_pull_none_drv_8ma>,
+ <6 RK_PC3 1 &pcfg_pull_none_drv_8ma>;
};
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <6 RK_PC5 1 &pcfg_pull_none_drv_8ma>;
};
/*
@@ -37,12 +37,12 @@
* think there's a card inserted
*/
sdmmc_cd_disabled: sdmmc-cd-disabled {
- rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <6 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
/* This is where we actually hook up CD */
sdmmc_cd_gpio: sdmmc-cd-gpio {
- rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index e16421d80d22..2ac8748a3a0c 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -104,39 +104,39 @@
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buck-5v {
drv_5v: drv-5v {
- rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
lcd {
lcd_enable_h: lcd-en {
- rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 192dbc089ade..1252522392c7 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -60,12 +60,19 @@
pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
/*
- * On the module itself this is one of these (depending
- * on the actual card populated):
+ * Depending on the actual card populated GPIO4 D4 and D5
+ * correspond to one of these signals on the module:
+ *
+ * D4:
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
+ *
+ * D5:
+ * - BT_I2S_WS_BT_RFDISABLE_L
+ * - No connect
*/
- reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>,
+ <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>;
};
vcc_5v: vcc-5v {
@@ -93,6 +100,23 @@
regulator-boot-on;
vin-supply = <&vcc_5v>;
};
+
+ vdd_logic: vdd-logic {
+ compatible = "pwm-regulator";
+ regulator-name = "vdd_logic";
+
+ pwms = <&pwm1 0 1994 0>;
+ pwm-supply = <&vcc33_sys>;
+
+ pwm-dutycycle-range = <0x7b 0>;
+ pwm-dutycycle-unit = <0x94>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <4000>;
+ };
};
&cpu0 {
@@ -193,8 +217,7 @@
regulator-max-microvolt = <1250000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
+ regulator-off-in-suspend;
};
};
@@ -376,10 +399,6 @@
&uart0 {
status = "okay";
- /* We need to go faster than 24MHz, so adjust clock parents / rates */
- assigned-clocks = <&cru SCLK_UART0>;
- assigned-clock-rates = <48000000>;
-
/* Pins don't include flow control by default; add that in */
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
@@ -431,10 +450,14 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <
/* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
&global_pwroff
>;
pinctrl-1 = <
/* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
&global_pwroff
>;
@@ -458,13 +481,13 @@
buttons {
pwr_key_l: pwr-key-l {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
emmc {
emmc_reset: emmc-reset {
- rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
/*
@@ -472,51 +495,51 @@
* We also have external pulls, so disable the internal ones.
*/
emmc_clk: emmc-clk {
- rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_drv_8ma>;
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_drv_8ma>;
};
emmc_bus8: emmc-bus8 {
- rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_drv_8ma>,
+ <3 RK_PA1 2 &pcfg_pull_none_drv_8ma>,
+ <3 RK_PA2 2 &pcfg_pull_none_drv_8ma>,
+ <3 RK_PA3 2 &pcfg_pull_none_drv_8ma>,
+ <3 RK_PA4 2 &pcfg_pull_none_drv_8ma>,
+ <3 RK_PA5 2 &pcfg_pull_none_drv_8ma>,
+ <3 RK_PA6 2 &pcfg_pull_none_drv_8ma>,
+ <3 RK_PA7 2 &pcfg_pull_none_drv_8ma>;
};
};
pmic {
pmic_int_l: pmic-int-l {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
reboot {
ap_warm_reset_h: ap-warm-reset-h {
- rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
recovery-switch {
rec_mode_l: rec-mode-l {
- rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdio0 {
wifi_enable_h: wifienable-h {
- rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
/* NOTE: mislabelled on schematic; should be bt_enable_h */
bt_enable_l: bt-enable-l {
- rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
/*
@@ -524,30 +547,30 @@
* We also have external pulls, so disable the internal ones.
*/
sdio0_bus4: sdio0-bus4 {
- rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <4 RK_PC4 1 &pcfg_pull_none_drv_8ma>,
+ <4 RK_PC5 1 &pcfg_pull_none_drv_8ma>,
+ <4 RK_PC6 1 &pcfg_pull_none_drv_8ma>,
+ <4 RK_PC7 1 &pcfg_pull_none_drv_8ma>;
};
sdio0_cmd: sdio0-cmd {
- rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <4 RK_PD0 1 &pcfg_pull_none_drv_8ma>;
};
sdio0_clk: sdio0-clk {
- rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>;
};
};
tpm {
tpm_int_h: tpm-int-h {
- rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
write-protect {
fw_wp_ap: fw-wp-ap {
- rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 40b232eb5011..ba06e9f97ddc 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -448,13 +448,13 @@
pmic {
pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb_host {
phy_pwr_en: phy-pwr-en {
- rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
};
usb2_pwr_en: usb2-pwr-en {
@@ -464,7 +464,7 @@
usb_otg {
otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 8ce3dd2264b1..aa017abf4f42 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -64,6 +64,7 @@
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <370>;
};
cpu1: cpu@501 {
device_type = "cpu";
@@ -74,6 +75,7 @@
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <370>;
};
cpu2: cpu@502 {
device_type = "cpu";
@@ -84,6 +86,7 @@
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <370>;
};
cpu3: cpu@503 {
device_type = "cpu";
@@ -94,6 +97,7 @@
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <370>;
};
};
@@ -569,6 +573,7 @@
pinctrl-1 = <&otp_out>;
pinctrl-2 = <&otp_gpio>;
#thermal-sensor-cells = <1>;
+ rockchip,grf = <&grf>;
rockchip,hw-tshut-temp = <95000>;
status = "disabled";
};
@@ -1383,19 +1388,6 @@
reg = <0x0 0xffaf0080 0x0 0x20>;
};
- gic: interrupt-controller@ffc01000 {
- compatible = "arm,gic-400";
- interrupt-controller;
- #interrupt-cells = <3>;
- #address-cells = <0>;
-
- reg = <0x0 0xffc01000 0x0 0x1000>,
- <0x0 0xffc02000 0x0 0x2000>,
- <0x0 0xffc04000 0x0 0x2000>,
- <0x0 0xffc06000 0x0 0x2000>;
- interrupts = <GIC_PPI 9 0xf04>;
- };
-
efuse: efuse@ffb40000 {
compatible = "rockchip,rk3288-efuse";
reg = <0x0 0xffb40000 0x0 0x20>;
@@ -1409,6 +1401,19 @@
};
};
+ gic: interrupt-controller@ffc01000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x0 0xffc01000 0x0 0x1000>,
+ <0x0 0xffc02000 0x0 0x2000>,
+ <0x0 0xffc04000 0x0 0x2000>,
+ <0x0 0xffc06000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3288-pinctrl";
rockchip,grf = <&grf>;
@@ -1536,16 +1541,16 @@
hdmi {
hdmi_cec_c0: hdmi-cec-c0 {
- rockchip,pins = <7 RK_PC0 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>;
};
hdmi_cec_c7: hdmi-cec-c7 {
- rockchip,pins = <7 RK_PC7 RK_FUNC_4 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC7 4 &pcfg_pull_none>;
};
hdmi_ddc: hdmi-ddc {
- rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
- <7 20 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>,
+ <7 RK_PC4 2 &pcfg_pull_none>;
};
};
@@ -1568,421 +1573,421 @@
sleep {
global_pwroff: global-pwroff {
- rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
};
ddrio_pwroff: ddrio-pwroff {
- rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
};
ddr0_retention: ddr0-retention {
- rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>;
};
ddr1_retention: ddr1-retention {
- rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>;
};
};
edp {
edp_hpd: edp-hpd {
- rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
+ rockchip,pins = <7 RK_PB3 2 &pcfg_pull_down>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
- <0 16 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>,
+ <0 RK_PC0 1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>,
- <8 5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <8 RK_PA4 1 &pcfg_pull_none>,
+ <8 RK_PA5 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
- rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>,
- <6 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <6 RK_PB1 1 &pcfg_pull_none>,
+ <6 RK_PB2 1 &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
- rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>,
- <2 17 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>,
+ <2 RK_PC1 1 &pcfg_pull_none>;
};
};
i2c4 {
i2c4_xfer: i2c4-xfer {
- rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>,
- <7 18 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC1 1 &pcfg_pull_none>,
+ <7 RK_PC2 1 &pcfg_pull_none>;
};
};
i2c5 {
i2c5_xfer: i2c5-xfer {
- rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>,
- <7 20 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC3 1 &pcfg_pull_none>,
+ <7 RK_PC4 1 &pcfg_pull_none>;
};
};
i2s0 {
i2s0_bus: i2s0-bus {
- rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>,
- <6 1 RK_FUNC_1 &pcfg_pull_none>,
- <6 2 RK_FUNC_1 &pcfg_pull_none>,
- <6 3 RK_FUNC_1 &pcfg_pull_none>,
- <6 4 RK_FUNC_1 &pcfg_pull_none>,
- <6 8 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <6 RK_PA0 1 &pcfg_pull_none>,
+ <6 RK_PA1 1 &pcfg_pull_none>,
+ <6 RK_PA2 1 &pcfg_pull_none>,
+ <6 RK_PA3 1 &pcfg_pull_none>,
+ <6 RK_PA4 1 &pcfg_pull_none>,
+ <6 RK_PB0 1 &pcfg_pull_none>;
};
};
lcdc {
lcdc_ctl: lcdc-ctl {
- rockchip,pins = <1 24 RK_FUNC_1 &pcfg_pull_none>,
- <1 25 RK_FUNC_1 &pcfg_pull_none>,
- <1 26 RK_FUNC_1 &pcfg_pull_none>,
- <1 27 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
+ <1 RK_PD1 1 &pcfg_pull_none>,
+ <1 RK_PD2 1 &pcfg_pull_none>,
+ <1 RK_PD3 1 &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up>;
};
sdmmc_cd: sdmmc-cd {
- rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <6 RK_PC6 1 &pcfg_pull_up>;
};
sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>;
};
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>,
- <6 17 RK_FUNC_1 &pcfg_pull_up>,
- <6 18 RK_FUNC_1 &pcfg_pull_up>,
- <6 19 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>,
+ <6 RK_PC1 1 &pcfg_pull_up>,
+ <6 RK_PC2 1 &pcfg_pull_up>,
+ <6 RK_PC3 1 &pcfg_pull_up>;
};
};
sdio0 {
sdio0_bus1: sdio0-bus1 {
- rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>;
};
sdio0_bus4: sdio0-bus4 {
- rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>,
- <4 21 RK_FUNC_1 &pcfg_pull_up>,
- <4 22 RK_FUNC_1 &pcfg_pull_up>,
- <4 23 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>,
+ <4 RK_PC5 1 &pcfg_pull_up>,
+ <4 RK_PC6 1 &pcfg_pull_up>,
+ <4 RK_PC7 1 &pcfg_pull_up>;
};
sdio0_cmd: sdio0-cmd {
- rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PD0 1 &pcfg_pull_up>;
};
sdio0_clk: sdio0-clk {
- rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none>;
};
sdio0_cd: sdio0-cd {
- rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PD2 1 &pcfg_pull_up>;
};
sdio0_wp: sdio0-wp {
- rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PD3 1 &pcfg_pull_up>;
};
sdio0_pwr: sdio0-pwr {
- rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PD4 1 &pcfg_pull_up>;
};
sdio0_bkpwr: sdio0-bkpwr {
- rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PD5 1 &pcfg_pull_up>;
};
sdio0_int: sdio0-int {
- rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PD6 1 &pcfg_pull_up>;
};
};
sdio1 {
sdio1_bus1: sdio1-bus1 {
- rockchip,pins = <3 24 4 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>;
};
sdio1_bus4: sdio1-bus4 {
- rockchip,pins = <3 24 4 &pcfg_pull_up>,
- <3 25 4 &pcfg_pull_up>,
- <3 26 4 &pcfg_pull_up>,
- <3 27 4 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>,
+ <3 RK_PD1 4 &pcfg_pull_up>,
+ <3 RK_PD2 4 &pcfg_pull_up>,
+ <3 RK_PD3 4 &pcfg_pull_up>;
};
sdio1_cd: sdio1-cd {
- rockchip,pins = <3 28 4 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD4 4 &pcfg_pull_up>;
};
sdio1_wp: sdio1-wp {
- rockchip,pins = <3 29 4 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD5 4 &pcfg_pull_up>;
};
sdio1_bkpwr: sdio1-bkpwr {
- rockchip,pins = <3 30 4 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD6 4 &pcfg_pull_up>;
};
sdio1_int: sdio1-int {
- rockchip,pins = <3 31 4 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD7 4 &pcfg_pull_up>;
};
sdio1_cmd: sdio1-cmd {
- rockchip,pins = <4 6 4 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PA6 4 &pcfg_pull_up>;
};
sdio1_clk: sdio1-clk {
- rockchip,pins = <4 7 4 &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PA7 4 &pcfg_pull_none>;
};
sdio1_pwr: sdio1-pwr {
- rockchip,pins = <4 9 4 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PB1 4 &pcfg_pull_up>;
};
};
emmc {
emmc_clk: emmc-clk {
- rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none>;
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PC0 2 &pcfg_pull_up>;
};
emmc_pwr: emmc-pwr {
- rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PB1 2 &pcfg_pull_up>;
};
emmc_bus1: emmc-bus1 {
- rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>;
};
emmc_bus4: emmc-bus4 {
- rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
- <3 1 RK_FUNC_2 &pcfg_pull_up>,
- <3 2 RK_FUNC_2 &pcfg_pull_up>,
- <3 3 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>,
+ <3 RK_PA1 2 &pcfg_pull_up>,
+ <3 RK_PA2 2 &pcfg_pull_up>,
+ <3 RK_PA3 2 &pcfg_pull_up>;
};
emmc_bus8: emmc-bus8 {
- rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
- <3 1 RK_FUNC_2 &pcfg_pull_up>,
- <3 2 RK_FUNC_2 &pcfg_pull_up>,
- <3 3 RK_FUNC_2 &pcfg_pull_up>,
- <3 4 RK_FUNC_2 &pcfg_pull_up>,
- <3 5 RK_FUNC_2 &pcfg_pull_up>,
- <3 6 RK_FUNC_2 &pcfg_pull_up>,
- <3 7 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>,
+ <3 RK_PA1 2 &pcfg_pull_up>,
+ <3 RK_PA2 2 &pcfg_pull_up>,
+ <3 RK_PA3 2 &pcfg_pull_up>,
+ <3 RK_PA4 2 &pcfg_pull_up>,
+ <3 RK_PA5 2 &pcfg_pull_up>,
+ <3 RK_PA6 2 &pcfg_pull_up>,
+ <3 RK_PA7 2 &pcfg_pull_up>;
};
};
spi0 {
spi0_clk: spi0-clk {
- rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PB4 1 &pcfg_pull_up>;
};
spi0_cs0: spi0-cs0 {
- rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PB5 1 &pcfg_pull_up>;
};
spi0_tx: spi0-tx {
- rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PB6 1 &pcfg_pull_up>;
};
spi0_rx: spi0-rx {
- rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PB7 1 &pcfg_pull_up>;
};
spi0_cs1: spi0-cs1 {
- rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PC0 1 &pcfg_pull_up>;
};
};
spi1 {
spi1_clk: spi1-clk {
- rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PB4 2 &pcfg_pull_up>;
};
spi1_cs0: spi1-cs0 {
- rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PB5 2 &pcfg_pull_up>;
};
spi1_rx: spi1-rx {
- rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PB6 2 &pcfg_pull_up>;
};
spi1_tx: spi1-tx {
- rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PB7 2 &pcfg_pull_up>;
};
};
spi2 {
spi2_cs1: spi2-cs1 {
- rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <8 RK_PA3 1 &pcfg_pull_up>;
};
spi2_clk: spi2-clk {
- rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <8 RK_PA6 1 &pcfg_pull_up>;
};
spi2_cs0: spi2-cs0 {
- rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <8 RK_PA7 1 &pcfg_pull_up>;
};
spi2_rx: spi2-rx {
- rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <8 RK_PB0 1 &pcfg_pull_up>;
};
spi2_tx: spi2-tx {
- rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <8 RK_PB1 1 &pcfg_pull_up>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,
- <4 17 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PC0 1 &pcfg_pull_up>,
+ <4 RK_PC1 1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PC2 1 &pcfg_pull_up>;
};
uart0_rts: uart0-rts {
- rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PC3 1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>,
- <5 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB0 1 &pcfg_pull_up>,
+ <5 RK_PB1 1 &pcfg_pull_none>;
};
uart1_cts: uart1-cts {
- rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PB2 1 &pcfg_pull_up>;
};
uart1_rts: uart1-rts {
- rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB3 1 &pcfg_pull_none>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>,
- <7 23 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC6 1 &pcfg_pull_up>,
+ <7 RK_PC7 1 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
};
uart3 {
uart3_xfer: uart3-xfer {
- rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>,
- <7 8 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA7 1 &pcfg_pull_up>,
+ <7 RK_PB0 1 &pcfg_pull_none>;
};
uart3_cts: uart3-cts {
- rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <7 RK_PB1 1 &pcfg_pull_up>;
};
uart3_rts: uart3-rts {
- rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB2 1 &pcfg_pull_none>;
};
};
uart4 {
uart4_xfer: uart4-xfer {
- rockchip,pins = <5 15 3 &pcfg_pull_up>,
- <5 14 3 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB7 3 &pcfg_pull_up>,
+ <5 RK_PB6 3 &pcfg_pull_none>;
};
uart4_cts: uart4-cts {
- rockchip,pins = <5 12 3 &pcfg_pull_up>;
+ rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
- rockchip,pins = <5 13 3 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB5 3 &pcfg_pull_none>;
};
};
tsadc {
otp_gpio: otp-gpio {
- rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
otp_out: otp-out {
- rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB2 1 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_pin: pwm0-pin {
- rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA0 1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
- rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PA1 1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
- rockchip,pins = <7 22 3 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC6 3 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
- rockchip,pins = <7 23 3 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PC7 3 &pcfg_pull_none>;
};
};
gmac {
rgmii_pins: rgmii-pins {
- rockchip,pins = <3 30 3 &pcfg_pull_none>,
- <3 31 3 &pcfg_pull_none>,
- <3 26 3 &pcfg_pull_none>,
- <3 27 3 &pcfg_pull_none>,
- <3 28 3 &pcfg_pull_none_12ma>,
- <3 29 3 &pcfg_pull_none_12ma>,
- <3 24 3 &pcfg_pull_none_12ma>,
- <3 25 3 &pcfg_pull_none_12ma>,
- <4 0 3 &pcfg_pull_none>,
- <4 5 3 &pcfg_pull_none>,
- <4 6 3 &pcfg_pull_none>,
- <4 9 3 &pcfg_pull_none_12ma>,
- <4 4 3 &pcfg_pull_none_12ma>,
- <4 1 3 &pcfg_pull_none>,
- <4 3 3 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>,
+ <3 RK_PD7 3 &pcfg_pull_none>,
+ <3 RK_PD2 3 &pcfg_pull_none>,
+ <3 RK_PD3 3 &pcfg_pull_none>,
+ <3 RK_PD4 3 &pcfg_pull_none_12ma>,
+ <3 RK_PD5 3 &pcfg_pull_none_12ma>,
+ <3 RK_PD0 3 &pcfg_pull_none_12ma>,
+ <3 RK_PD1 3 &pcfg_pull_none_12ma>,
+ <4 RK_PA0 3 &pcfg_pull_none>,
+ <4 RK_PA5 3 &pcfg_pull_none>,
+ <4 RK_PA6 3 &pcfg_pull_none>,
+ <4 RK_PB1 3 &pcfg_pull_none_12ma>,
+ <4 RK_PA4 3 &pcfg_pull_none_12ma>,
+ <4 RK_PA1 3 &pcfg_pull_none>,
+ <4 RK_PA3 3 &pcfg_pull_none>;
};
rmii_pins: rmii-pins {
- rockchip,pins = <3 30 3 &pcfg_pull_none>,
- <3 31 3 &pcfg_pull_none>,
- <3 28 3 &pcfg_pull_none>,
- <3 29 3 &pcfg_pull_none>,
- <4 0 3 &pcfg_pull_none>,
- <4 5 3 &pcfg_pull_none>,
- <4 4 3 &pcfg_pull_none>,
- <4 1 3 &pcfg_pull_none>,
- <4 2 3 &pcfg_pull_none>,
- <4 3 3 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>,
+ <3 RK_PD7 3 &pcfg_pull_none>,
+ <3 RK_PD4 3 &pcfg_pull_none>,
+ <3 RK_PD5 3 &pcfg_pull_none>,
+ <4 RK_PA0 3 &pcfg_pull_none>,
+ <4 RK_PA5 3 &pcfg_pull_none>,
+ <4 RK_PA4 3 &pcfg_pull_none>,
+ <4 RK_PA1 3 &pcfg_pull_none>,
+ <4 RK_PA2 3 &pcfg_pull_none>,
+ <4 RK_PA3 3 &pcfg_pull_none>;
};
};
spdif {
spdif_tx: spdif-tx {
- rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <6 RK_PB3 1 &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index 1c4507b66fdd..b1db924710c8 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -37,7 +37,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
no-sd;
no-sdio;
non-removable;
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index f47ac86d2852..5876690ee09e 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -682,58 +682,58 @@
emmc {
emmc_bus8: emmc-bus8 {
- rockchip,pins = <2 RK_PA0 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <2 RK_PA1 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <2 RK_PA2 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <2 RK_PA3 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <2 RK_PA4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <2 RK_PA5 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <2 RK_PA6 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <2 RK_PA7 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PA1 2 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PA2 2 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PA3 2 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PA4 2 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PA5 2 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PA6 2 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PA7 2 &pcfg_pull_up_drv_8ma>;
};
emmc_clk: emmc-clk {
- rockchip,pins = <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none_drv_8ma>;
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <2 RK_PB4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <2 RK_PB4 2 &pcfg_pull_up_drv_8ma>;
};
};
gmac {
rmii_pins: rmii-pins {
- rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>,
- <1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>,
- <1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>,
- <1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
- <1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
- <1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
- <1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>,
- <1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>,
- <1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>,
- <1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>,
+ <1 RK_PC3 2 &pcfg_pull_none>,
+ <1 RK_PC4 2 &pcfg_pull_none>,
+ <1 RK_PB2 3 &pcfg_pull_none_drv_12ma>,
+ <1 RK_PB3 3 &pcfg_pull_none_drv_12ma>,
+ <1 RK_PB4 3 &pcfg_pull_none_drv_12ma>,
+ <1 RK_PB5 3 &pcfg_pull_none>,
+ <1 RK_PB6 3 &pcfg_pull_none>,
+ <1 RK_PB7 3 &pcfg_pull_none>,
+ <1 RK_PC2 3 &pcfg_pull_none>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <0 RK_PB1 RK_FUNC_1 &pcfg_pull_none_smt>,
- <0 RK_PB2 RK_FUNC_1 &pcfg_pull_none_smt>;
+ rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none_smt>,
+ <0 RK_PB2 1 &pcfg_pull_none_smt>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
- <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PD3 1 &pcfg_pull_up>,
+ <2 RK_PD4 1 &pcfg_pull_up>;
};
};
i2c2m1 {
i2c2m1_xfer: i2c2m1-xfer {
- rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
- <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC2 2 &pcfg_pull_none>,
+ <0 RK_PC6 3 &pcfg_pull_none>;
};
i2c2m1_gpio: i2c2m1-gpio {
@@ -744,8 +744,8 @@
i2c2m05v {
i2c2m05v_xfer: i2c2m05v-xfer {
- rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
- <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD5 2 &pcfg_pull_none>,
+ <1 RK_PD4 2 &pcfg_pull_none>;
};
i2c2m05v_gpio: i2c2m05v-gpio {
@@ -756,123 +756,123 @@
i2c3 {
i2c3_xfer: i2c3-xfer {
- rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
- <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB6 1 &pcfg_pull_none>,
+ <0 RK_PC4 2 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_pin: pwm0-pin {
- rockchip,pins = <0 RK_PC5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC5 1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
- rockchip,pins = <0 RK_PC4 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
- rockchip,pins = <0 RK_PC6 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC6 1 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
- rockchip,pins = <0 RK_PC0 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC0 1 &pcfg_pull_none>;
};
};
pwm4 {
pwm4_pin: pwm4-pin {
- rockchip,pins = <1 RK_PC1 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC1 3 &pcfg_pull_none>;
};
};
pwm5 {
pwm5_pin: pwm5-pin {
- rockchip,pins = <1 RK_PA7 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA7 2 &pcfg_pull_none>;
};
};
pwm6 {
pwm6_pin: pwm6-pin {
- rockchip,pins = <1 RK_PB0 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>;
};
};
pwm7 {
pwm7_pin: pwm7-pin {
- rockchip,pins = <1 RK_PB1 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB1 2 &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
+ rockchip,pins = <3 RK_PC4 1 &pcfg_pull_none_drv_4ma>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ rockchip,pins = <3 RK_PC5 1 &pcfg_pull_up_drv_4ma>;
};
sdmmc_cd: sdmmc-cd {
- rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ rockchip,pins = <0 RK_PA1 1 &pcfg_pull_up_drv_4ma>;
};
sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>;
};
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
- <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
- <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
- <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>,
+ <3 RK_PC2 1 &pcfg_pull_up_drv_4ma>,
+ <3 RK_PC1 1 &pcfg_pull_up_drv_4ma>,
+ <3 RK_PC0 1 &pcfg_pull_up_drv_4ma>;
};
};
spim0 {
spim0_clk: spim0-clk {
- rockchip,pins = <1 RK_PD0 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PD0 2 &pcfg_pull_up>;
};
spim0_cs0: spim0-cs0 {
- rockchip,pins = <1 RK_PD1 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PD1 2 &pcfg_pull_up>;
};
spim0_tx: spim0-tx {
- rockchip,pins = <1 RK_PD3 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>;
};
spim0_rx: spim0-rx {
- rockchip,pins = <1 RK_PD2 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>;
};
};
spim1 {
spim1_clk: spim1-clk {
- rockchip,pins = <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>;
};
spim1_cs0: spim1-cs0 {
- rockchip,pins = <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA4 1 &pcfg_pull_up>;
};
spim1_rx: spim1-rx {
- rockchip,pins = <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB0 1 &pcfg_pull_up>;
};
spim1_tx: spim1-tx {
- rockchip,pins = <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA7 1 &pcfg_pull_up>;
};
};
tsadc {
otp_out: otp-out {
- rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
};
otp_gpio: otp-gpio {
@@ -882,16 +882,16 @@
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
- <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>,
+ <3 RK_PA5 1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
- rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
- rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>;
};
uart0_rts_gpio: uart0-rts-gpio {
@@ -901,40 +901,40 @@
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
- <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD3 1 &pcfg_pull_up>,
+ <1 RK_PD2 1 &pcfg_pull_none>;
};
uart1_cts: uart1-cts {
- rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>;
};
uart1_rts: uart1-rts {
- rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>;
};
};
uart2m0 {
uart2m0_xfer: uart2m0-xfer {
- rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
- <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD2 1 &pcfg_pull_up>,
+ <2 RK_PD1 1 &pcfg_pull_none>;
};
};
uart2m1 {
uart2m1_xfer: uart2m1-xfer {
- rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
- <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up>,
+ <3 RK_PC2 2 &pcfg_pull_none>;
};
};
uart2_5v {
uart2_5v_cts: uart2_5v-cts {
- rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
};
uart2_5v_rts: uart2_5v-rts {
- rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD5 1 &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index eb6d1926c0d6..fbbd93707404 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -376,7 +376,7 @@
vdd_core-supply = <&ldo14_reg>;
clock-frequency = <16000000>;
- clocks = <&clock_cam 0>;
+ clocks = <&camera 0>;
clock-names = "mclk";
nreset-gpios = <&gpb 2 0>;
nstby-gpios = <&gpb 0 0>;
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index a44d5eb56bed..2ad642f51fd9 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -585,12 +585,10 @@
clock-names = "sclk_cam0", "sclk_cam1";
#address-cells = <1>;
#size-cells = <1>;
+ #clock-cells = <1>;
+ clock-output-names = "cam_a_clkout", "cam_b_clkout";
ranges;
- clock_cam: clock-controller {
- #clock-cells = <1>;
- };
-
csis0: csis@fa600000 {
compatible = "samsung,s5pv210-csis";
reg = <0xfa600000 0x4000>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index d159ee42ef29..2e2c1a7b1d1d 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
*
* Copyright (C) 2015 Atmel,
* 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/dma/at91.h>
@@ -688,13 +651,13 @@
ranges = <0 0xf8044000 0x1420>;
};
- rstc@f8048000 {
+ reset_controller: rstc@f8048000 {
compatible = "atmel,sama5d3-rstc";
reg = <0xf8048000 0x10>;
clocks = <&clk32k>;
};
- shdwc@f8048010 {
+ shutdown_controller: shdwc@f8048010 {
compatible = "atmel,sama5d2-shdwc";
reg = <0xf8048010 0x10>;
clocks = <&clk32k>;
@@ -710,7 +673,7 @@
clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
};
- watchdog@f8048040 {
+ watchdog: watchdog@f8048040 {
compatible = "atmel,sama5d4-wdt";
reg = <0xf8048040 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/sama5d36ek_cmp.dts b/arch/arm/boot/dts/sama5d36ek_cmp.dts
index b632143844e5..66695b9a3e77 100644
--- a/arch/arm/boot/dts/sama5d36ek_cmp.dts
+++ b/arch/arm/boot/dts/sama5d36ek_cmp.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
*
* Copyright (C) 2016 Atmel,
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sama5d36.dtsi"
diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
index a02f59021364..9d2563602cbe 100644
--- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
*
* Copyright (C) 2016 Atmel,
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
index 97e171db5970..8a6916a69da4 100644
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
*
* Copyright (C) 2016 Atmel,
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sama5d3xcm_cmp.dtsi"
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 6c1e41f94549..6ab27a7b388d 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
*
* Copyright (C) 2014 Atmel,
* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/clock/at91.h>
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
index df2bab1624d4..64dc0799f3d7 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -9,6 +9,7 @@
&mmc {
status = "okay";
cap-sd-highspeed;
+ cap-mmc-highspeed;
broken-cd;
bus-width = <4>;
};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index e6ed7c0354a2..81fabf031eff 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1196,21 +1196,73 @@
status = "disabled";
};
+ gpu@a0300000 {
+ /*
+ * This block is referred to as "Smart Graphics Adapter SGA500"
+ * in documentation but is in practice a pretty straight-forward
+ * MALI-400 GPU block.
+ */
+ compatible = "stericsson,db8500-mali", "arm,mali-400";
+ reg = <0xa0300000 0x10000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "combined";
+ clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>;
+ clock-names = "bus", "core";
+ mali-supply = <&db8500_sga_reg>;
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ };
+
mcde@a0350000 {
- compatible = "stericsson,mcde";
- reg = <0xa0350000 0x1000>, /* MCDE */
- <0xa0351000 0x1000>, /* DSI link 1 */
- <0xa0352000 0x1000>, /* DSI link 2 */
- <0xa0353000 0x1000>; /* DSI link 3 */
+ compatible = "ste,mcde";
+ reg = <0xa0350000 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ epod-supply = <&db8500_b2r2_mcde_reg>;
+ vana-supply = <&ab8500_ldo_ana_reg>;
clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
<&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
- <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */
- <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */
- <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */
- <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */
- <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */
- <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */
+ <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */
+ clock-names = "mcde", "lcd", "hdmi";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ dsi0: dsi@a0351000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0351000 0x1000>;
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
+ clock-names = "hs", "lp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ dsi1: dsi@a0352000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0352000 0x1000>;
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
+ clock-names = "hs", "lp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ dsi2: dsi@a0353000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0353000 0x1000>;
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ /* This DSI port only has the Low Power / Energy Save clock */
+ clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
+ clock-names = "lp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
cryp@a03cb000 {
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 35e944d8b5c4..eeaea21f5eca 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -190,5 +190,18 @@
};
};
};
+
+ mcde@a0350000 {
+ status = "okay";
+
+ dsi@a0351000 {
+ panel {
+ compatible = "samsung,s6d16d0";
+ reg = <0>;
+ vdd1-supply = <&ab8500_ldo_aux1_reg>;
+ reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 0e7d77d719d7..76868444caa4 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -274,5 +274,18 @@
};
};
};
+
+ mcde@a0350000 {
+ status = "okay";
+
+ dsi@a0351000 {
+ panel {
+ compatible = "samsung,s6d16d0";
+ reg = <0>;
+ vdd1-supply = <&ab8500_ldo_aux1_reg>;
+ reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 588b6ef94e93..4a4954492ed1 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -80,6 +80,19 @@
};
soc {
+ romem: nvmem@1fff7800 {
+ compatible = "st,stm32f4-otp";
+ reg = <0x1fff7800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_cal1: calib@22c {
+ reg = <0x22c 0x2>;
+ };
+ ts_cal2: calib@22e {
+ reg = <0x22e 0x2>;
+ };
+ };
+
timer2: timer@40000000 {
compatible = "st,stm32-timer";
reg = <0x40000000 0x400>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 3c7216844a9b..6f1d0ac8c31c 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -102,6 +102,10 @@
};
};
+&rcc {
+ compatible = "st,stm32f769-rcc", "st,stm32f746-rcc", "st,stm32-rcc";
+};
+
&cec {
pinctrl-0 = <&cec_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index 980b2769caf9..e44e7baa3f17 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -188,6 +188,74 @@
};
};
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+ <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
+ };
+ };
+
usart1_pins: usart1@0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 5cac79ebebb1..c065266ee377 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -339,6 +339,20 @@
dma-requests = <32>;
};
+ sdmmc1: sdmmc@52007000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x52007000 0x1000>;
+ interrupts = <49>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC1_CK>;
+ clock-names = "apb_pclk";
+ resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ };
+
exti: interrupt-controller@58000000 {
compatible = "st,stm32h7-exti";
interrupt-controller;
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index dd06c8f3d09a..3acd2e9c434e 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -61,6 +61,14 @@
aliases {
serial0 = &usart2;
};
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
&clk_hse {
@@ -84,6 +92,18 @@
};
};
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
&usart2 {
pinctrl-0 = <&usart2_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index ebc3f0933f5c..ab78ad532375 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -70,13 +70,20 @@
regulator-always-on;
};
+ v2v9_sd: regulator-v2v9_sd {
+ compatible = "regulator-fixed";
+ regulator-name = "v2v9_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+
usbotg_hs_phy: usb-phy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
clocks = <&rcc USB1ULPI_CK>;
clock-names = "main_clk";
};
-
};
&adc_12 {
@@ -122,6 +129,20 @@
};
};
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+ broken-cd;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&v2v9_sd>;
+ status = "okay";
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 9ec4694e93a7..85c417d9983b 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -157,6 +157,27 @@
};
};
+ cec_pins_sleep_a: cec-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
+ cec_pins_b: cec-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, AF5)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ cec_pins_sleep_b: cec-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
@@ -213,6 +234,13 @@
};
};
+ i2c1_pins_sleep_a: i2c1-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+ };
+ };
+
i2c2_pins_a: i2c2-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
@@ -223,6 +251,13 @@
};
};
+ i2c2_pins_sleep_a: i2c2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+ };
+ };
+
i2c5_pins_a: i2c5-0 {
pins {
pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
@@ -233,6 +268,152 @@
};
};
+ i2c5_pins_sleep_a: i2c5-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+ <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+ };
+ };
+
+ ltdc_pins_a: ltdc-a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
+ <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ ltdc_pins_sleep_a: ltdc-a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */
+ <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
+ ltdc_pins_b: ltdc-b-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */
+ <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ ltdc_pins_sleep_b: ltdc-b-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
+ <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */
+ <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */
+ <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */
+ <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
+ <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
+ <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
m_can1_pins_a: m-can1-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
@@ -325,6 +506,87 @@
};
};
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+ <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+ };
+ };
+
+ spdifrx_pins_a: spdifrx-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
+ bias-disable;
+ };
+ };
+
+ spdifrx_sleep_pins_a: spdifrx-1 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
+ };
+ };
+
uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
@@ -371,6 +633,13 @@
};
};
+ i2c4_pins_sleep_a: i2c4-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+ };
+ };
+
spi1_pins_a: spi1-0 {
pins1 {
pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
new file mode 100644
index 000000000000..098dbfb06b61
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
+ compatible = "st,stm32mp157a-dk1", "st,stm32mp157";
+
+ aliases {
+ ethernet0 = &ethernet0;
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ led {
+ compatible = "gpio-leds";
+ blue {
+ label = "heartbeat";
+ gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+};
+
+&cec {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cec_pins_b>;
+ pinctrl-1 = <&cec_pins_sleep_b>;
+ status = "okay";
+};
+
+&ethernet0 {
+ status = "okay";
+ pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+ pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
new file mode 100644
index 000000000000..20ea601a546d
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157a-dk1.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
+ compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+ reg18: reg18 {
+ compatible = "regulator-fixed";
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ phy-dsi-supply = <&reg18>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ltdc_ep1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>;
+ reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+ power-supply = <&v3v3>;
+ status = "okay";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&ltdc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep1_out: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index d66edb0c66cd..62a8c78e7e2e 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -7,6 +7,8 @@
#include "stm32mp157c.dtsi"
#include "stm32mp157-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter";
@@ -41,12 +43,17 @@
regulator-always-on;
};
- vdd_usb: vdd-usb {
- compatible = "regulator-fixed";
- regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ sd_switch: regulator-sd_switch {
+ compatible = "regulator-gpio";
+ regulator-name = "sd_switch";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-type = "voltage";
regulator-always-on;
+
+ gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1 2900000 0x0>;
};
};
@@ -60,6 +67,149 @@
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&ipcc {
+ status = "okay";
};
&iwdg2 {
@@ -75,6 +225,21 @@
status = "okay";
};
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+ broken-cd;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ vqmmc-supply = <&sd_switch>;
+ status = "okay";
+};
+
&timers6 {
status = "okay";
/* spare dmas for other usage */
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index f8bbfff5950b..2afeee65c3ea 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -379,6 +379,19 @@
status = "disabled";
};
+ spdifrx: audio-controller@4000d000 {
+ compatible = "st,stm32h7-spdifrx";
+ #sound-dai-cells = <0>;
+ reg = <0x4000d000 0x400>;
+ clocks = <&rcc SPDIF_K>;
+ clock-names = "kclk";
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 93 0x400 0x01>,
+ <&dmamux1 94 0x400 0x01>;
+ dma-names = "rx", "rx-ctrl";
+ status = "disabled";
+ };
+
usart2: serial@4000e000 {
compatible = "st,stm32h7-uart";
reg = <0x4000e000 0x400>;
@@ -886,6 +899,21 @@
status = "disabled";
};
+ ipcc: mailbox@4c001000 {
+ compatible = "st,stm32mp1-ipcc";
+ #mbox-cells = <1>;
+ reg = <0x4c001000 0x400>;
+ st,proc-id = <0>;
+ interrupts-extended =
+ <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 61 1>;
+ interrupt-names = "rx", "tx", "wakeup";
+ clocks = <&rcc IPCC>;
+ wakeup-source;
+ status = "disabled";
+ };
+
rcc: rcc@50000000 {
compatible = "st,stm32mp1-rcc", "syscon";
reg = <0x50000000 0x1000>;
@@ -903,6 +931,7 @@
syscfg: syscon@50020000 {
compatible = "st,stm32mp157-syscfg", "syscon";
reg = <0x50020000 0x400>;
+ clocks = <&rcc SYSCFG>;
};
lptimer2: timer@50021000 {
@@ -1050,6 +1079,20 @@
status = "disabled";
};
+ sdmmc1: sdmmc@58005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x58005000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ };
+
crc1: crc@58009000 {
compatible = "st,stm32f7-crc";
reg = <0x58009000 0x400>;
@@ -1199,6 +1242,19 @@
status = "disabled";
};
+ bsec: nvmem@5c005000 {
+ compatible = "st,stm32mp15-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
+ };
+
i2c6: i2c@5c009000 {
compatible = "st,stm32f7-i2c";
reg = <0x5c009000 0x400>;
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index cf7b392dff31..74262988881c 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -131,20 +131,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
-};
-
&reg_usb0_vbus {
status = "okay";
};
@@ -165,10 +151,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 197a1f2b75ff..7306c65df88a 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -184,12 +184,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
};
&reg_ahci_5v {
@@ -254,9 +248,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
index 896e27a08727..8ee3ff42bd55 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -158,20 +158,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
@@ -223,10 +209,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index f63767cddd8e..bf2044bac42f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -86,20 +86,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
-};
-
&reg_usb0_vbus {
status = "okay";
};
@@ -121,10 +107,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
index 26d0c1d6a02b..ca878384e902 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -164,20 +164,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
@@ -233,10 +219,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index 71c27ea0b53e..76016f2ca29d 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -150,20 +150,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -209,10 +195,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 2f0d966f39ad..0a562b2cc5bc 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -61,8 +61,6 @@
gpio-keys {
compatible = "gpio-keys-polled";
- pinctrl-names = "default";
- pinctrl-0 = <&key_pins_inet9f>;
poll-interval = <20>;
left-joystick-left {
@@ -70,7 +68,7 @@
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+ gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
};
left-joystick-right {
@@ -78,7 +76,7 @@
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
- gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+ gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
};
left-joystick-up {
@@ -86,7 +84,7 @@
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+ gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
};
left-joystick-down {
@@ -94,7 +92,7 @@
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
- gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+ gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
};
right-joystick-left {
@@ -102,7 +100,7 @@
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+ gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
};
right-joystick-right {
@@ -110,7 +108,7 @@
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
- gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+ gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
};
right-joystick-up {
@@ -118,7 +116,7 @@
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+ gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
};
right-joystick-down {
@@ -126,7 +124,7 @@
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
- gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+ gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
};
dpad-left {
@@ -134,7 +132,7 @@
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
+ gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
};
dpad-right {
@@ -142,7 +140,7 @@
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
- gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+ gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
};
dpad-up {
@@ -150,7 +148,7 @@
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+ gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
};
dpad-down {
@@ -158,55 +156,55 @@
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
- gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+ gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
};
x {
label = "Button X";
linux,code = <BTN_X>;
- gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
+ gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
};
y {
label = "Button Y";
linux,code = <BTN_Y>;
- gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
+ gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
};
a {
label = "Button A";
linux,code = <BTN_A>;
- gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
};
b {
label = "Button B";
linux,code = <BTN_B>;
- gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
+ gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
};
select {
label = "Select Button";
linux,code = <BTN_SELECT>;
- gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+ gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
};
start {
label = "Start Button";
linux,code = <BTN_START>;
- gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+ gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
};
top-left {
label = "Top Left Button";
linux,code = <BTN_TL>;
- gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+ gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
};
top-right {
label = "Top Right Button";
linux,code = <BTN_TR>;
- gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
+ gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
};
};
};
@@ -306,30 +304,6 @@
status = "okay";
};
-&pio {
- key_pins_inet9f: key-pins {
- pins = "PA0", "PA1", "PA3", "PA4",
- "PA5", "PA6", "PA8", "PA9",
- "PA11", "PA12", "PA13",
- "PA14", "PA15", "PA16", "PA17",
- "PH22", "PH23", "PH24", "PH25", "PH26";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -375,10 +349,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 0dbf69576512..58ad2ad9041f 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -148,14 +148,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_usb1_vbus {
status = "okay";
};
@@ -183,9 +175,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index b74a61496537..a8e537fd4bd6 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -186,18 +186,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
&reg_ahci_5v {
@@ -229,10 +217,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index d82a604f3d9c..0f1e781069e9 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -154,14 +154,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
#include "axp209.dtsi"
&reg_dcdc2 {
@@ -201,9 +193,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
index 84b25be1ac94..24a3d23e1952 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -146,20 +146,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
@@ -211,10 +197,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 73c3ac42095f..e88daa4ef1af 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -267,7 +267,7 @@
#dma-cells = <2>;
};
- nfc: nand@1c03000 {
+ nfc: nand-controller@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
@@ -342,6 +342,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon0-pixel-clock";
+ #clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
ports {
@@ -391,6 +392,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon1-pixel-clock";
+ #clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 15>;
ports {
@@ -494,13 +496,14 @@
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
+ dr_mode = "otg";
status = "disabled";
};
usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+ reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
@@ -517,7 +520,6 @@
interrupts = <39>;
clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -527,7 +529,6 @@
interrupts = <64>;
clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -607,7 +608,6 @@
interrupts = <40>;
clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -617,7 +617,6 @@
interrupts = <65>;
clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index c88f08984483..8af0eae2ddc1 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -119,12 +119,6 @@
};
&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PG12";
- function = "gpio_in";
- bias-pull-up;
- };
-
led_pins_t004: led-pin {
pins = "PB2";
function = "gpio_out";
@@ -149,9 +143,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 262c2ffbdcfa..5340b4164df2 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -218,12 +218,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PG12";
- function = "gpio_in";
- bias-pull-up;
- };
};
&reg_usb0_vbus {
@@ -271,9 +265,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
index f3cede9beb63..a23bf24792ec 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -127,20 +127,6 @@
status = "okay";
};
-&pio {
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PG1";
- function = "gpio_in";
- bias-pull-down;
- };
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PG2";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
@@ -195,10 +181,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+ usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 9369f7453beb..9b9f2a574851 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -124,14 +124,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PG2";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
#include "axp209.dtsi"
&reg_dcdc2 {
@@ -182,9 +174,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
index ca8f3fd1ddfe..ba8d75b3c716 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
@@ -206,9 +206,8 @@
};
&usbphy {
- pinctrl-names = "default";
- usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_vcc5v0>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index 943868e495bc..5df398d77238 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -109,18 +109,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PG2";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PG1";
- function = "gpio_in";
- bias-pull-down;
- };
};
&reg_usb0_vbus {
@@ -145,10 +133,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+ usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 9409c232d48a..39101228a755 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -74,8 +74,6 @@
bridge {
compatible = "dumb-vga-dac";
- #address-cells = <1>;
- #size-cells = <0>;
ports {
#address-cells = <1>;
@@ -204,18 +202,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PG2";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PG1";
- function = "gpio_in";
- bias-pull-down;
- };
};
&reg_usb0_vbus {
@@ -253,10 +239,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+ usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
index 7257f39b31ce..fde559a8b61e 100644
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
@@ -53,16 +53,9 @@
power-supply = <&reg_vcc3v3>;
enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
backlight = <&backlight>;
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- panel_input: endpoint@0 {
- reg = <0>;
+ port {
+ panel_input: endpoint {
remote-endpoint = <&tcon0_out_lcd>;
};
};
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index 732873cbeedc..be486d28d04f 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -58,13 +58,11 @@
/delete-property/stdout-path;
};
- i2c_lcd: i2c-gpio {
+ i2c_lcd: i2c {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_lcd_pins>;
- gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
- <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+ sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+ scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */
i2c-gpio,delay-us = <5>;
};
};
@@ -94,14 +92,6 @@
};
};
-&pio {
- i2c_lcd_pins: i2c-lcd-pin {
- pins = "PG10", "PG12";
- function = "gpio_out";
- bias-pull-up;
- };
-};
-
&reg_usb0_vbus {
gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
};
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
index 3f70b8c53132..a32cde3e32eb 100644
--- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
@@ -133,8 +133,6 @@
status = "okay";
nand@0 {
- #address-cells = <2>;
- #size-cells = <2>;
reg = <0>;
allwinner,rb = <0>;
nand-ecc-mode = "hw";
@@ -233,7 +231,7 @@
};
&usbphy {
- usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb1_vbus-supply = <&reg_vcc5v0>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
index 86e46aa59134..d003b895a696 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -325,8 +325,8 @@
};
&usbphy {
- usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
index f4298facf9dc..4bf4943d4eb7 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -84,9 +84,7 @@
onewire {
compatible = "w1-gpio";
- gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
- pinctrl-names = "default";
- pinctrl-0 = <&chip_w1_pin>;
+ gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */
};
};
@@ -173,14 +171,6 @@
status = "okay";
};
-&pio {
- chip_w1_pin: chip-w1-pin {
- pins = "PD2";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_dcdc2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
@@ -279,7 +269,7 @@
&usbphy {
status = "okay";
- usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_vcc5v0>;
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index 5b1f0e198eb6..1a9926d71410 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -132,20 +132,6 @@
status = "okay";
};
-&pio {
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PG1";
- function = "gpio_in";
- bias-pull-down;
- };
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PG2";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -198,10 +184,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+ usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 5497d985c54a..2fb438c4fe9d 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -127,6 +127,7 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
+ dma-ranges;
ranges;
system-control@1c00000 {
@@ -181,6 +182,14 @@
};
};
+ mbus: dram-controller@1c01000 {
+ compatible = "allwinner,sun5i-a13-mbus";
+ reg = <0x01c01000 0x1000>;
+ clocks = <&ccu 99>;
+ dma-ranges = <0x00000000 0x40000000 0x20000000>;
+ #interconnect-cells = <1>;
+ };
+
dma: dma-controller@1c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
@@ -189,7 +198,7 @@
#dma-cells = <2>;
};
- nfc: nand@1c03000 {
+ nfc: nand-controller@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
@@ -238,11 +247,8 @@
status = "disabled";
port {
- #address-cells = <1>;
- #size-cells = <0>;
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
+ tve0_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_tve0>;
};
};
@@ -278,6 +284,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon-pixel-clock";
+ #clock-cells = <0>;
status = "disabled";
ports {
@@ -285,12 +292,9 @@
#size-cells = <0>;
tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- tcon0_in_be0: endpoint@0 {
- reg = <0>;
+ tcon0_in_be0: endpoint {
remote-endpoint = <&be0_out_tcon0>;
};
};
@@ -365,13 +369,14 @@
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
+ dr_mode = "otg";
status = "disabled";
};
usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4>;
+ reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
reg-names = "phy_ctrl", "pmu1";
clocks = <&ccu CLK_USB_PHY0>;
clock-names = "usb_phy";
@@ -386,7 +391,6 @@
interrupts = <39>;
clocks = <&ccu CLK_AHB_EHCI>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -396,7 +400,6 @@
interrupts = <40>;
clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -501,18 +504,18 @@
bias-pull-up;
};
- mmc2_8bit_pins: mmc2-8bit-pins {
+ mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
pins = "PC6", "PC7", "PC8", "PC9",
- "PC10", "PC11", "PC12", "PC13",
- "PC14", "PC15";
+ "PC10", "PC11";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
- mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
+ mmc2_8bit_pins: mmc2-8bit-pins {
pins = "PC6", "PC7", "PC8", "PC9",
- "PC10", "PC11";
+ "PC10", "PC11", "PC12", "PC13",
+ "PC14", "PC15";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
@@ -536,6 +539,11 @@
function = "nand0";
};
+ pwm0_pin: pwm0-pin {
+ pins = "PB2";
+ function = "pwm";
+ };
+
spi2_pe_pins: spi2-pe-pins {
pins = "PE1", "PE2", "PE3";
function = "spi2";
@@ -575,11 +583,6 @@
pins = "PG11", "PG12";
function = "uart3";
};
-
- pwm0_pin: pwm0-pin {
- pins = "PB2";
- function = "pwm";
- };
};
timer@1c20c00 {
@@ -727,6 +730,8 @@
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_FE>;
+ interconnects = <&mbus 19>;
+ interconnect-names = "dma-mem";
status = "disabled";
ports {
@@ -734,12 +739,9 @@
#size-cells = <0>;
fe0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- fe0_out_be0: endpoint@0 {
- reg = <0>;
+ fe0_out_be0: endpoint {
remote-endpoint = <&be0_in_fe0>;
};
};
@@ -755,6 +757,8 @@
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_BE>;
+ interconnects = <&mbus 18>;
+ interconnect-names = "dma-mem";
status = "disabled";
assigned-clocks = <&ccu CLK_DE_BE>;
@@ -765,23 +769,17 @@
#size-cells = <0>;
be0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- be0_in_fe0: endpoint@0 {
- reg = <0>;
+ be0_in_fe0: endpoint {
remote-endpoint = <&fe0_out_be0>;
};
};
be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- be0_out_tcon0: endpoint@0 {
- reg = <0>;
+ be0_out_tcon0: endpoint {
remote-endpoint = <&tcon0_in_be0>;
};
};
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 0b7bedf85fb9..c3d56dc93513 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -63,10 +63,8 @@
i2c_lcd: i2c {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_lcd_pins>;
- gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
- <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
+ sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */
+ scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */
i2c-gpio,delay-us = <5>;
};
};
@@ -113,14 +111,6 @@
status = "okay";
};
-&pio {
- i2c_lcd_pins: i2c-lcd-pins {
- pins = "PA23", "PA24";
- function = "gpio_out";
- bias-pull-up;
- };
-};
-
&reg_usb2_vbus {
gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index e17a65b3561e..09832b4e8fc8 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -86,31 +86,23 @@
vga-dac {
compatible = "dumb-vga-dac";
vdd-supply = <&reg_vga_3v3>;
- #address-cells = <1>;
- #size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- vga_dac_in: endpoint@0 {
- reg = <0>;
+ vga_dac_in: endpoint {
remote-endpoint = <&tcon0_out_vga>;
};
};
port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- vga_dac_out: endpoint@0 {
- reg = <0>;
+ vga_dac_out: endpoint {
remote-endpoint = <&vga_con_in>;
};
};
@@ -335,8 +327,8 @@
};
&usbphy {
- usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
- usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+ usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+ usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index 0832ac5ae3ec..091eb2ac53b3 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -157,7 +157,6 @@
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pin>;
- spdif-out = "okay";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 13304b8c5139..c04efad81bbc 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -292,6 +292,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon0-pixel-clock";
+ #clock-cells = <0>;
ports {
#address-cells = <1>;
@@ -340,6 +341,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon1-pixel-clock";
+ #clock-cells = <0>;
ports {
#address-cells = <1>;
@@ -491,8 +493,6 @@
};
hdmi_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
};
};
@@ -508,6 +508,7 @@
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
+ dr_mode = "otg";
status = "disabled";
};
@@ -542,7 +543,6 @@
clocks = <&ccu CLK_AHB1_EHCI0>;
resets = <&ccu RST_AHB1_EHCI0>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -553,7 +553,6 @@
clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_AHB1_OHCI0>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -564,7 +563,6 @@
clocks = <&ccu CLK_AHB1_EHCI1>;
resets = <&ccu RST_AHB1_EHCI1>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -575,7 +573,6 @@
clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_AHB1_OHCI1>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -1029,7 +1026,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
@@ -1229,12 +1226,9 @@
};
be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- be0_out_drc0: endpoint@0 {
- reg = <0>;
+ be0_out_drc0: endpoint {
remote-endpoint = <&drc0_in_be0>;
};
};
@@ -1259,12 +1253,9 @@
#size-cells = <0>;
drc0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- drc0_in_be0: endpoint@0 {
- reg = <0>;
+ drc0_in_be0: endpoint {
remote-endpoint = <&be0_out_drc0>;
};
};
@@ -1380,7 +1371,6 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
- #size-cells = <0>;
#gpio-cells = <3>;
s_ir_rx_pin: s-ir-rx-pin {
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index 60b355f7184c..bc3170a0b8b5 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -260,7 +260,7 @@
};
&usbphy {
- usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+ usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_dldo1>;
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
index 86143de21c22..7de2abd541c1 100644
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -73,14 +73,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PA15";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&p2wi {
status = "okay";
@@ -173,9 +165,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+ usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_dldo1>;
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 81bc85d398c1..4df921632f7a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -246,12 +246,6 @@
"SPI-MISO", "SPI-CE1", "",
"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
"", "", "", "", "", "", "", "";
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
};
#include "axp209.dtsi"
@@ -329,9 +323,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 200685b0b1cb..08e5a5abf8cc 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -173,14 +173,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_ahci_5v {
status = "okay";
};
@@ -236,9 +228,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index f91e1bee44e8..3e170cfac86a 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -229,14 +229,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
#include "axp209.dtsi"
&ac_power_supply {
@@ -322,9 +314,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index 823aabce0462..c34a83f666c7 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -314,8 +314,8 @@
};
&usbphy {
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 5e411194bf62..e40dd47df8ce 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -174,18 +174,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
&reg_ahci_5v {
@@ -217,10 +205,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 4e1c590eb098..95c6f8949076 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -174,23 +174,17 @@
};
&pio {
+ vcc-pa-supply = <&reg_vcc3v3>;
+ vcc-pc-supply = <&reg_vcc3v3>;
+ vcc-pe-supply = <&reg_ldo3>;
+ vcc-pf-supply = <&reg_vcc3v3>;
+ vcc-pg-supply = <&reg_ldo4>;
+
led_pins_olinuxinolime: led-pins {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
&reg_ahci_5v {
@@ -267,10 +261,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 840ae1194a66..0dcba070444a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -252,18 +252,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
#include "axp209.dtsi"
@@ -355,10 +343,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index 15881081cac4..9628041bb3a3 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -176,14 +176,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -239,9 +231,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index d64de2e73a9f..7b3532665c28 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -135,14 +135,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -198,9 +190,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index 538ea15fa32f..173b676436e9 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -168,14 +168,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_ahci_5v {
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
@@ -226,9 +218,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index a72ed4318d04..14a88aa16a97 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -168,14 +168,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_ahci_5v {
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
status = "okay";
@@ -226,9 +218,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index ffade253d129..6a66b0432dfa 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -156,14 +156,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
@@ -223,9 +215,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
index c27e56091fb1..f8475a39777b 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -145,14 +145,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -206,9 +198,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 641a8fa6d428..9ad8e445b240 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -333,7 +333,7 @@
#dma-cells = <2>;
};
- nfc: nand@1c03000 {
+ nfc: nand-controller@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -406,6 +406,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon0-pixel-clock";
+ #clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
ports {
@@ -455,6 +456,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon1-pixel-clock";
+ #clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 15>;
ports {
@@ -586,13 +588,14 @@
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
+ dr_mode = "otg";
status = "disabled";
};
usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+ reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
@@ -609,7 +612,6 @@
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -619,7 +621,6 @@
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -702,7 +703,6 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -712,7 +712,6 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -751,21 +750,31 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ /omit-if-no-ref/
+ can_pa_pins: can-pa-pins {
+ pins = "PA16", "PA17";
+ function = "can";
+ };
+
+ /omit-if-no-ref/
can_ph_pins: can-ph-pins {
pins = "PH20", "PH21";
function = "can";
};
+ /omit-if-no-ref/
clk_out_a_pin: clk-out-a-pin {
pins = "PI12";
function = "clk_out_a";
};
+ /omit-if-no-ref/
clk_out_b_pin: clk-out-b-pin {
pins = "PI13";
function = "clk_out_b";
};
+ /omit-if-no-ref/
emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -775,6 +784,17 @@
function = "emac";
};
+ /omit-if-no-ref/
+ emac_ph_pins: emac-ph-pins {
+ pins = "PH8", "PH9", "PH10", "PH11",
+ "PH14", "PH15", "PH16", "PH17",
+ "PH18", "PH19", "PH20", "PH21",
+ "PH22", "PH23", "PH24", "PH25",
+ "PH26";
+ function = "emac";
+ };
+
+ /omit-if-no-ref/
gmac_mii_pins: gmac-mii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -784,6 +804,7 @@
function = "gmac";
};
+ /omit-if-no-ref/
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -798,46 +819,55 @@
drive-strength = <40>;
};
+ /omit-if-no-ref/
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
+ /omit-if-no-ref/
i2c1_pins: i2c1-pins {
pins = "PB18", "PB19";
function = "i2c1";
};
+ /omit-if-no-ref/
i2c2_pins: i2c2-pins {
pins = "PB20", "PB21";
function = "i2c2";
};
+ /omit-if-no-ref/
i2c3_pins: i2c3-pins {
pins = "PI0", "PI1";
function = "i2c3";
};
+ /omit-if-no-ref/
ir0_rx_pin: ir0-rx-pin {
pins = "PB4";
function = "ir0";
};
+ /omit-if-no-ref/
ir0_tx_pin: ir0-tx-pin {
pins = "PB3";
function = "ir0";
};
+ /omit-if-no-ref/
ir1_rx_pin: ir1-rx-pin {
pins = "PB23";
function = "ir1";
};
+ /omit-if-no-ref/
ir1_tx_pin: ir1-tx-pin {
pins = "PB22";
function = "ir1";
};
+ /omit-if-no-ref/
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -846,6 +876,7 @@
bias-pull-up;
};
+ /omit-if-no-ref/
mmc2_pins: mmc2-pins {
pins = "PC6", "PC7", "PC8",
"PC9", "PC10", "PC11";
@@ -854,6 +885,7 @@
bias-pull-up;
};
+ /omit-if-no-ref/
mmc3_pins: mmc3-pins {
pins = "PI4", "PI5", "PI6",
"PI7", "PI8", "PI9";
@@ -862,127 +894,206 @@
bias-pull-up;
};
+ /omit-if-no-ref/
ps2_0_pins: ps2-0-pins {
pins = "PI20", "PI21";
function = "ps2";
};
+ /omit-if-no-ref/
ps2_1_ph_pins: ps2-1-ph-pins {
pins = "PH12", "PH13";
function = "ps2";
};
+ /omit-if-no-ref/
pwm0_pin: pwm0-pin {
pins = "PB2";
function = "pwm";
};
+ /omit-if-no-ref/
pwm1_pin: pwm1-pin {
pins = "PI3";
function = "pwm";
};
+ /omit-if-no-ref/
spdif_tx_pin: spdif-tx-pin {
pins = "PB13";
function = "spdif";
bias-pull-up;
};
+ /omit-if-no-ref/
spi0_pi_pins: spi0-pi-pins {
pins = "PI11", "PI12", "PI13";
function = "spi0";
};
+ /omit-if-no-ref/
spi0_cs0_pi_pin: spi0-cs0-pi-pin {
pins = "PI10";
function = "spi0";
};
+ /omit-if-no-ref/
spi0_cs1_pi_pin: spi0-cs1-pi-pin {
pins = "PI14";
function = "spi0";
};
+ /omit-if-no-ref/
spi1_pi_pins: spi1-pi-pins {
pins = "PI17", "PI18", "PI19";
function = "spi1";
};
+ /omit-if-no-ref/
spi1_cs0_pi_pin: spi1-cs0-pi-pin {
pins = "PI16";
function = "spi1";
};
+ /omit-if-no-ref/
spi2_pb_pins: spi2-pb-pins {
pins = "PB15", "PB16", "PB17";
function = "spi2";
};
+ /omit-if-no-ref/
spi2_cs0_pb_pin: spi2-cs0-pb-pin {
pins = "PB14";
function = "spi2";
};
+ /omit-if-no-ref/
spi2_pc_pins: spi2-pc-pins {
pins = "PC20", "PC21", "PC22";
function = "spi2";
};
+ /omit-if-no-ref/
spi2_cs0_pc_pin: spi2-cs0-pc-pin {
pins = "PC19";
function = "spi2";
};
+ /omit-if-no-ref/
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
+ /omit-if-no-ref/
+ uart0_pf_pins: uart0-pf-pins {
+ pins = "PF2", "PF4";
+ function = "uart0";
+ };
+
+ /omit-if-no-ref/
+ uart1_pa_pins: uart1-pa-pins {
+ pins = "PA10", "PA11";
+ function = "uart1";
+ };
+
+ /omit-if-no-ref/
+ uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
+ pins = "PA12", "PA13";
+ function = "uart1";
+ };
+
+ /omit-if-no-ref/
+ uart2_pa_pins: uart2-pa-pins {
+ pins = "PA2", "PA3";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
+ uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
+ pins = "PA0", "PA1";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
uart2_pi_pins: uart2-pi-pins {
pins = "PI18", "PI19";
function = "uart2";
};
+ /omit-if-no-ref/
uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
pins = "PI16", "PI17";
function = "uart2";
};
+ /omit-if-no-ref/
uart3_pg_pins: uart3-pg-pins {
pins = "PG6", "PG7";
function = "uart3";
};
+ /omit-if-no-ref/
uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
pins = "PG8", "PG9";
function = "uart3";
};
+ /omit-if-no-ref/
uart3_ph_pins: uart3-ph-pins {
pins = "PH0", "PH1";
function = "uart3";
};
+ /omit-if-no-ref/
+ uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
+ pins = "PH2", "PH3";
+ function = "uart3";
+ };
+
+ /omit-if-no-ref/
uart4_pg_pins: uart4-pg-pins {
pins = "PG10", "PG11";
function = "uart4";
};
+ /omit-if-no-ref/
uart4_ph_pins: uart4-ph-pins {
pins = "PH4", "PH5";
function = "uart4";
};
+ /omit-if-no-ref/
+ uart5_ph_pins: uart5-ph-pins {
+ pins = "PH6", "PH7";
+ function = "uart5";
+ };
+
+ /omit-if-no-ref/
uart5_pi_pins: uart5-pi-pins {
pins = "PI10", "PI11";
function = "uart5";
};
+ /omit-if-no-ref/
+ uart6_pa_pins: uart6-pa-pins {
+ pins = "PA12", "PA13";
+ function = "uart6";
+ };
+
+ /omit-if-no-ref/
uart6_pi_pins: uart6-pi-pins {
pins = "PI12", "PI13";
function = "uart6";
};
+ /omit-if-no-ref/
+ uart7_pa_pins: uart7-pa-pins {
+ pins = "PA14", "PA15";
+ function = "uart7";
+ };
+
+ /omit-if-no-ref/
uart7_pi_pins: uart7-pi-pins {
pins = "PI20", "PI21";
function = "uart7";
@@ -1341,7 +1452,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 14a7d0288b45..af2fa694a467 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -161,16 +161,18 @@
#dma-cells = <1>;
};
- nfc: nand@1c03000 {
- compatible = "allwinner,sun4i-a10-nand";
+ nfc: nand-controller@1c03000 {
+ compatible = "allwinner,sun8i-a23-nand-controller";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
resets = <&ccu RST_BUS_NAND>;
reset-names = "ahb";
+ dmas = <&dma 5>;
+ dma-names = "rxtx";
pinctrl-names = "default";
- pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
+ pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -185,6 +187,7 @@
clock-names = "ahb",
"tcon-ch0";
clock-output-names = "tcon-pixel-clock";
+ #clock-cells = <0>;
resets = <&ccu RST_BUS_LCD>;
reset-names = "lcd";
status = "disabled";
@@ -194,19 +197,14 @@
#size-cells = <0>;
tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- tcon0_in_drc0: endpoint@0 {
- reg = <0>;
+ tcon0_in_drc0: endpoint {
remote-endpoint = <&drc0_out_tcon0>;
};
};
tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
};
};
@@ -281,6 +279,7 @@
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
+ dr_mode = "otg";
status = "disabled";
};
@@ -308,7 +307,6 @@
clocks = <&ccu CLK_BUS_EHCI>;
resets = <&ccu RST_BUS_EHCI>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -319,7 +317,6 @@
clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
resets = <&ccu RST_BUS_OHCI>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -398,25 +395,25 @@
function = "nand0";
};
- nand_pins_cs0: nand-pins-cs0 {
+ nand_cs0_pin: nand-cs0-pin {
pins = "PC4";
function = "nand0";
bias-pull-up;
};
- nand_pins_cs1: nand-pins-cs1 {
+ nand_cs1_pin: nand-cs1-pin {
pins = "PC3";
function = "nand0";
bias-pull-up;
};
- nand_pins_rb0: nand-pins-rb0 {
+ nand_rb0_pin: nand-rb0-pin {
pins = "PC6";
function = "nand0";
bias-pull-up;
};
- nand_pins_rb1: nand-pins-rb1 {
+ nand_rb1_pin: nand-rb1-pin {
pins = "PC7";
function = "nand0";
bias-pull-up;
@@ -604,7 +601,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
@@ -629,12 +626,9 @@
#size-cells = <0>;
fe0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- fe0_out_be0: endpoint@0 {
- reg = <0>;
+ fe0_out_be0: endpoint {
remote-endpoint = <&be0_in_fe0>;
};
};
@@ -656,23 +650,17 @@
#size-cells = <0>;
be0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- be0_in_fe0: endpoint@0 {
- reg = <0>;
+ be0_in_fe0: endpoint {
remote-endpoint = <&fe0_out_be0>;
};
};
be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- be0_out_drc0: endpoint@0 {
- reg = <0>;
+ be0_out_drc0: endpoint {
remote-endpoint = <&drc0_in_be0>;
};
};
@@ -696,23 +684,17 @@
#size-cells = <0>;
drc0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- drc0_in_be0: endpoint@0 {
- reg = <0>;
+ drc0_in_be0: endpoint {
remote-endpoint = <&be0_out_drc0>;
};
};
drc0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- drc0_out_tcon0: endpoint@0 {
- reg = <0>;
+ drc0_out_tcon0: endpoint {
remote-endpoint = <&tcon0_in_drc0>;
};
};
@@ -801,6 +783,20 @@
status = "disabled";
};
+ r_i2c: i2c@1f02400 {
+ compatible = "allwinner,sun8i-a23-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x01f02400 0x400>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pins>;
+ clocks = <&apb0_gates 6>;
+ resets = <&apb0_rst 6>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a23-r-pinctrl";
reg = <0x01f02c00 0x400>;
@@ -813,6 +809,12 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ r_i2c_pins: r-i2c-pins {
+ pins = "PL0", "PL1";
+ function = "s_i2c";
+ bias-pull-up;
+ };
+
r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
index d4dab7c28398..5659c63d7d77 100644
--- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
@@ -65,3 +65,9 @@
&panel {
compatible = "bananapi,s070wv20-ct16", "simple-panel";
};
+
+&tcon0_out {
+ tcon0_out_lcd: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
index b0bc2360f8c4..9c5750c25613 100644
--- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
@@ -48,3 +48,10 @@
model = "Q8 A33 Tablet";
compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
};
+
+&tcon0_out {
+ tcon0_out_lcd: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index f3667268adde..785798e3a104 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -63,16 +63,9 @@
panel {
compatible = "netron-dy,e231732";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- panel_input: endpoint@0 {
- reg = <0>;
+ port {
+ panel_input: endpoint {
remote-endpoint = <&tcon0_out_panel>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 1111a6498102..1532a0e59af4 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -265,19 +265,12 @@
phys = <&dphy>;
phy-names = "dphy";
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- dsi_in_tcon0: endpoint {
- remote-endpoint = <&tcon0_out_dsi>;
- };
+ port {
+ dsi_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_dsi>;
};
};
};
@@ -420,6 +413,9 @@
};
&tcon0_out {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
tcon0_out_dsi: endpoint@1 {
reg = <1>;
remote-endpoint = <&dsi_in_tcon0>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 838be7b3715f..9d34eabba121 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -389,7 +389,19 @@
};
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
+ usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index fcbec3d7ccd7..ea299d3d84d0 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -420,7 +420,19 @@
};
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
+ usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 98e8cea26dbe..66d078053d5f 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -46,6 +46,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
/ {
model = "TBS A711 Tablet";
@@ -98,6 +99,13 @@
};
};
+ reg_gps: reg-gps {
+ compatible = "regulator-fixed";
+ regulator-name = "gps";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
reg_vbat: reg-vbat {
compatible = "regulator-fixed";
regulator-name = "vbat";
@@ -156,6 +164,18 @@
status = "okay";
};
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ accelerometer@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_dcdc1>;
pinctrl-names = "default";
@@ -200,6 +220,25 @@
status = "okay";
};
+&r_lradc {
+ vref-supply = <&reg_aldo2>;
+ status = "okay";
+
+ button@210 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <210000>;
+ };
+
+ button@410 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <410000>;
+ };
+};
+
&r_rsb {
status = "okay";
@@ -391,8 +430,7 @@
};
&tcon0_out {
- tcon0_out_lcd: endpoint@0 {
- reg = <0>;
+ tcon0_out_lcd: endpoint {
remote-endpoint = <&panel_input>;
};
};
@@ -407,7 +445,34 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm20702a1";
+ clocks = <&ac100_rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_vbat>;
+ vddio-supply = <&reg_dldo1>;
+ device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pb_pins>;
status = "okay";
+
+ gnss {
+ compatible = "u-blox,neo-6m";
+
+ v-bckp-supply = <&reg_rtc_ldo>;
+ vcc-supply = <&reg_gps>;
+ current-speed = <9600>;
+ };
};
&usb_otg {
@@ -418,7 +483,7 @@
&usbphy {
usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
usb0_vbus-supply = <&reg_drivevbus>;
- usb1_vbus_supply = <&reg_vmain>;
- usb2_vbus_supply = <&reg_vmain>;
+ usb1_vbus-supply = <&reg_vmain>;
+ usb2_vbus-supply = <&reg_vmain>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index b099d2fbb5cd..392b0cabbf0d 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -61,79 +61,91 @@
#size-cells = <0>;
cpu0: cpu@0 {
- clocks = <&ccu CLK_C0CPUX>;
- clock-names = "cpu";
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C0CPUX>;
operating-points-v2 = <&cpu0_opp_table>;
cci-control-port = <&cci_control0>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0>;
+ #cooling-cells = <2>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C0CPUX>;
operating-points-v2 = <&cpu0_opp_table>;
cci-control-port = <&cci_control0>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <1>;
+ #cooling-cells = <2>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C0CPUX>;
operating-points-v2 = <&cpu0_opp_table>;
cci-control-port = <&cci_control0>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <2>;
+ #cooling-cells = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C0CPUX>;
operating-points-v2 = <&cpu0_opp_table>;
cci-control-port = <&cci_control0>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <3>;
+ #cooling-cells = <2>;
};
cpu100: cpu@100 {
- clocks = <&ccu CLK_C1CPUX>;
- clock-names = "cpu";
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C1CPUX>;
operating-points-v2 = <&cpu1_opp_table>;
cci-control-port = <&cci_control1>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x100>;
+ #cooling-cells = <2>;
};
cpu@101 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C1CPUX>;
operating-points-v2 = <&cpu1_opp_table>;
cci-control-port = <&cci_control1>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x101>;
+ #cooling-cells = <2>;
};
cpu@102 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C1CPUX>;
operating-points-v2 = <&cpu1_opp_table>;
cci-control-port = <&cci_control1>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x102>;
+ #cooling-cells = <2>;
};
cpu@103 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ clocks = <&ccu CLK_C1CPUX>;
operating-points-v2 = <&cpu1_opp_table>;
cci-control-port = <&cci_control1>;
enable-method = "allwinner,sun8i-a83t-smp";
reg = <0x103>;
+ #cooling-cells = <2>;
};
};
@@ -333,6 +345,11 @@
reg = <0>;
remote-endpoint = <&tcon0_in_mixer0>;
};
+
+ mixer0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_mixer0>;
+ };
};
};
};
@@ -351,9 +368,17 @@
#size-cells = <0>;
mixer1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
- mixer1_out_tcon1: endpoint {
+ mixer1_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_mixer1>;
+ };
+
+ mixer1_out_tcon1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&tcon1_in_mixer1>;
};
};
@@ -420,6 +445,7 @@
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-pixel-clock";
+ #clock-cells = <0>;
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
@@ -436,11 +462,14 @@
reg = <0>;
remote-endpoint = <&mixer0_out_tcon0>;
};
+
+ tcon0_in_mixer1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mixer1_out_tcon0>;
+ };
};
tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
};
};
@@ -460,9 +489,17 @@
#size-cells = <0>;
tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
- tcon1_in_mixer1: endpoint {
+ tcon1_in_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer0_out_tcon1>;
+ };
+
+ tcon1_in_mixer1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&mixer1_out_tcon1>;
};
};
@@ -557,6 +594,7 @@
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
+ dr_mode = "otg";
status = "disabled";
};
@@ -594,7 +632,6 @@
clocks = <&ccu CLK_BUS_EHCI0>;
resets = <&ccu RST_BUS_EHCI0>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -606,7 +643,6 @@
clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -618,7 +654,6 @@
clocks = <&ccu CLK_BUS_EHCI1>;
resets = <&ccu RST_BUS_EHCI1>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -671,6 +706,12 @@
function = "i2c1";
};
+ /omit-if-no-ref/
+ i2c2_pe_pins: i2c2-pe-pins {
+ pins = "PE14", "PE15";
+ function = "i2c2";
+ };
+
i2c2_ph_pins: i2c2-ph-pins {
pins = "PH4", "PH5";
function = "i2c2";
@@ -742,6 +783,12 @@
pins = "PG8", "PG9";
function = "uart1";
};
+
+ /omit-if-no-ref/
+ uart2_pb_pins: uart2-pb-pins {
+ pins = "PB0", "PB1";
+ function = "uart2";
+ };
};
timer@1c20c00 {
@@ -847,6 +894,39 @@
status = "disabled";
};
+ uart2: serial@1c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@1c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@1c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun8i-a83t-i2c",
"allwinner,sun6i-a31-i2c";
@@ -907,7 +987,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
@@ -998,6 +1078,13 @@
status = "disabled";
};
+ r_lradc: lradc@1f03c00 {
+ compatible = "allwinner,sun8i-a83t-r-lradc";
+ reg = <0x01f03c00 0x100>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index 1db2541135a7..78a37a47185a 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -28,7 +28,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
pwr_led {
label = "bananapi-m2-zero:red:pwr";
@@ -39,7 +38,6 @@
gpio_keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
sw4 {
label = "power";
@@ -67,8 +65,9 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
};
};
@@ -115,14 +114,27 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_vcc3v3>;
+ vddio-supply = <&reg_vcc3v3>;
+ device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ };
+
};
&usb_otg {
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index 84cd9c061227..4970eda2877e 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -178,7 +178,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 25540b7694d5..6277f13f3eb3 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -142,7 +142,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
@@ -193,13 +193,13 @@
&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&spdif_tx_pins_a>;
+ pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
index 2c952eacfef5..ff0a7a952e0c 100644
--- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
+++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
@@ -84,15 +84,14 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
- cd-inverted;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
@@ -120,7 +119,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index 4ec94d72f021..4ba533b0340f 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -64,7 +64,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
@@ -121,7 +120,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
index 9412668bb888..69243dcb30a6 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -93,7 +93,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
index 6246d3eff39d..07867a0d569b 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -105,7 +105,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index f110ee382239..4df29a65316d 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -59,8 +59,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
status {
label = "nanopi:blue:status";
@@ -78,8 +76,6 @@
r_gpio_keys {
compatible = "gpio-keys";
input-name = "k1";
- pinctrl-names = "default";
- pinctrl-0 = <&sw_r_npi>;
k1 {
label = "k1";
@@ -104,28 +100,9 @@
status = "okay";
};
-&pio {
- leds_npi: led_pins {
- pins = "PA10";
- function = "gpio_out";
- };
-};
-
-&r_pio {
- leds_r_npi: led_pins {
- pins = "PL10";
- function = "gpio_out";
- };
-
- sw_r_npi: key_pins {
- pins = "PL3";
- function = "gpio_in";
- };
-};
-
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index f1fc6bdca8be..597c425d08ec 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -75,8 +75,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
status_led {
label = "orangepi:red:status";
@@ -92,8 +90,6 @@
r_gpio_keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&sw_r_opc>;
sw2 {
label = "sw2";
@@ -110,8 +106,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_pwrseq_pin_orangepi>;
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
};
};
@@ -152,7 +146,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
@@ -179,30 +173,6 @@
};
};
-&pio {
- leds_opc: led_pins {
- pins = "PA15";
- function = "gpio_out";
- };
-};
-
-&r_pio {
- leds_r_opc: led_pins {
- pins = "PL10";
- function = "gpio_out";
- };
-
- sw_r_opc: key_pins {
- pins = "PL3", "PL4";
- function = "gpio_in";
- };
-
- wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin {
- pins = "PL7";
- function = "gpio_out";
- };
-};
-
&reg_usb1_vbus {
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
@@ -210,7 +180,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 476ae8e387ca..6f9c97add54e 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -74,8 +74,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
pwr_led {
label = "orangepi:green:pwr";
@@ -91,8 +89,6 @@
r_gpio_keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&sw_r_opc>;
sw4 {
label = "sw4";
@@ -126,7 +122,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
@@ -160,28 +156,9 @@
status = "okay";
};
-&pio {
- leds_opc: led_pins {
- pins = "PA15";
- function = "gpio_out";
- };
-};
-
-&r_pio {
- leds_r_opc: led_pins {
- pins = "PL10";
- function = "gpio_out";
- };
-
- sw_r_opc: key_pins {
- pins = "PL3";
- function = "gpio_in";
- };
-};
-
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 245fd658defb..840849169bed 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -73,8 +73,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
pwr_led {
label = "orangepi:green:pwr";
@@ -90,8 +88,6 @@
r_gpio_keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&sw_r_opc>;
sw4 {
label = "sw4";
@@ -166,25 +162,6 @@
status = "okay";
};
-&pio {
- leds_opc: led_pins {
- pins = "PA15";
- function = "gpio_out";
- };
-};
-
-&r_pio {
- leds_r_opc: led_pins {
- pins = "PL10";
- function = "gpio_out";
- };
-
- sw_r_opc: key_pins {
- pins = "PL3";
- function = "gpio_in";
- };
-};
-
&reg_usb0_vbus {
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
@@ -192,7 +169,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 46240334128f..5aff8ecc66cb 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -73,8 +73,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
pwr_led {
label = "orangepi:green:pwr";
@@ -90,8 +88,6 @@
r_gpio_keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&sw_r_opc>;
sw4 {
label = "sw4";
@@ -152,7 +148,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
@@ -179,13 +175,6 @@
status = "okay";
};
-&pio {
- leds_opc: led_pins {
- pins = "PA15";
- function = "gpio_out";
- };
-};
-
&r_i2c {
status = "okay";
@@ -210,18 +199,6 @@
};
};
-&r_pio {
- leds_r_opc: led_pins {
- pins = "PL10";
- function = "gpio_out";
- };
-
- sw_r_opc: key_pins {
- pins = "PL3";
- function = "gpio_in";
- };
-};
-
&reg_usb0_vbus {
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
@@ -229,7 +206,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index ac8438c2cff1..97f497854e05 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -63,8 +63,6 @@
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_pin_a>;
regulator-name = "usb3-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -116,13 +114,6 @@
bias-pull-up;
};
-&pio {
- usb3_vbus_pin_a: usb3_vbus_pin {
- pins = "PG11";
- function = "gpio_out";
- };
-};
-
&r_i2c {
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
index c834048c325e..b8f46e2802fd 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -79,7 +79,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
post-power-on-delay-ms = <200>;
};
@@ -135,6 +134,6 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts
new file mode 100644
index 000000000000..4738f3a9efe4
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Bootlin
+ * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "RerVision H3-DVK";
+ compatible = "rervision,h3-dvk", "allwinner,sun8i-h3";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+ vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+ dr_mode = "peripheral";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 959d265e7254..e37c30e811d3 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -231,3 +231,7 @@
&rtc {
compatible = "allwinner,sun8i-h3-rtc";
};
+
+&sid {
+ compatible = "allwinner,sun8i-h3-sid";
+};
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index 53104f4ccacc..3d9a1524e17e 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -54,16 +54,9 @@
backlight = <&backlight>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
power-supply = <&reg_dc1sw>;
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- panel_input: endpoint@0 {
- reg = <0>;
+ port {
+ panel_input: endpoint {
remote-endpoint = <&tcon0_out_lcd>;
};
};
@@ -120,13 +113,6 @@
status = "okay";
};
-&tcon0_out {
- tcon0_out_lcd: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
-};
-
&usbphy {
usb1_vbus-supply = <&reg_dldo1>;
};
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
index 32cf1ab33aab..246dec5846a4 100644
--- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
+++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
@@ -34,8 +34,6 @@
/* 2Gb Macronix MX30LF2G18AC (3V) */
nand@0 {
- #address-cells = <1>;
- #size-cells = <1>;
reg = <0>;
allwinner,rb = <0>;
nand-ecc-mode = "hw";
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts
index 316998e9ec5d..4f48eec6b2ef 100644
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts
@@ -158,14 +158,6 @@
status = "okay";
};
-&pio {
- usb0_id_det: usb0-id-detect-pin {
- pins = "PD10";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&r_rsb {
status = "okay";
@@ -314,10 +306,8 @@
&usbphy {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_det>;
usb0_vbus-supply = <&reg_drivevbus>;
- usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
+ usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb1_vbus-supply = <&reg_usb1_vbus>;
};
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 06b685869f52..bb856e53b806 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -273,7 +273,6 @@
clocks = <&ccu CLK_BUS_EHCI1>;
resets = <&ccu RST_BUS_EHCI1>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -285,7 +284,6 @@
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -296,7 +294,6 @@
clocks = <&ccu CLK_BUS_EHCI2>;
resets = <&ccu RST_BUS_EHCI2>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -308,7 +305,6 @@
<&ccu CLK_USB_OHCI2>;
resets = <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -562,9 +558,7 @@
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
resets = <&ccu RST_BUS_SATA>;
- resets-name = "ahci";
- #address-cells = <1>;
- #size-cells = <0>;
+ reset-names = "ahci";
status = "disabled";
};
@@ -614,12 +608,9 @@
#size-cells = <0>;
tcon_top_mixer0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- tcon_top_mixer0_in_mixer0: endpoint@0 {
- reg = <0>;
+ tcon_top_mixer0_in_mixer0: endpoint {
remote-endpoint = <&mixer0_out_tcon_top>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 189e479eb95a..b3d8b8f056cd 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -86,14 +86,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH8";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&r_rsb {
status = "okay";
@@ -224,9 +216,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+ usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
index 99c8cf7bb86c..2e4587d26ce5 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
@@ -96,6 +96,6 @@
};
&usbphy {
- usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 21e1806ca509..df72b1719c34 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -129,12 +129,9 @@
#size-cells = <0>;
mixer0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- mixer0_out_tcon0: endpoint@0 {
- reg = <0>;
+ mixer0_out_tcon0: endpoint {
remote-endpoint = <&tcon0_in_mixer0>;
};
};
@@ -150,6 +147,7 @@
clock-names = "ahb",
"tcon-ch0";
clock-output-names = "tcon-pixel-clock";
+ #clock-cells = <0>;
resets = <&ccu RST_BUS_TCON0>;
reset-names = "lcd";
status = "disabled";
@@ -159,12 +157,9 @@
#size-cells = <0>;
tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- tcon0_in_mixer0: endpoint@0 {
- reg = <0>;
+ tcon0_in_mixer0: endpoint {
remote-endpoint = <&mixer0_out_tcon0>;
};
};
@@ -419,7 +414,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index bf97f6244c23..f05cabd34b8e 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -105,6 +105,24 @@
#include "axp22x.dtsi"
+&mmc0 {
+ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pg_pins>;
+ vmmc-supply = <&reg_dldo2>;
+ vqmmc-supply = <&reg_dldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
@@ -152,24 +170,6 @@
regulator-name = "vcc-wifi";
};
-&mmc0 {
- vmmc-supply = <&reg_dcdc1>;
- bus-width = <4>;
- cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
- status = "okay";
-};
-
-&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pg_pins>;
- vmmc-supply = <&reg_dldo2>;
- vqmmc-supply = <&reg_dldo1>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-};
-
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 28c034928d67..18156ffa3ce9 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -89,31 +89,23 @@
vga-dac {
compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
vdd-supply = <&reg_dcdc1>;
- #address-cells = <1>;
- #size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- vga_dac_in: endpoint@0 {
- reg = <0>;
+ vga_dac_in: endpoint {
remote-endpoint = <&tcon0_out_vga>;
};
};
port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- vga_dac_out: endpoint@0 {
- reg = <0>;
+ vga_dac_out: endpoint {
remote-endpoint = <&vga_con_in>;
};
};
@@ -502,8 +494,7 @@
};
&tcon0_out {
- tcon0_out_vga: endpoint@0 {
- reg = <0>;
+ tcon0_out_vga: endpoint {
remote-endpoint = <&vga_dac_in>;
};
};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 864715ec3cb0..2ed28d9e2787 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -82,7 +82,7 @@
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
+ regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
@@ -91,7 +91,7 @@
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
+ regulator-name = "usb3-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 6fb292e0b662..0c1eec9000e3 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -289,7 +289,7 @@
status = "disabled";
};
- soc {
+ soc@20000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -342,7 +342,6 @@
clocks = <&usb_clocks CLK_BUS_HCI0>;
resets = <&usb_clocks RST_USB0_HCI>;
phys = <&usbphy1>;
- phy-names = "usb";
status = "disabled";
};
@@ -354,7 +353,6 @@
<&usb_clocks CLK_USB_OHCI0>;
resets = <&usb_clocks RST_USB0_HCI>;
phys = <&usbphy1>;
- phy-names = "usb";
status = "disabled";
};
@@ -376,7 +374,6 @@
clocks = <&usb_clocks CLK_BUS_HCI1>;
resets = <&usb_clocks RST_USB1_HCI>;
phys = <&usbphy2>;
- phy-names = "usb";
status = "disabled";
};
@@ -406,7 +403,6 @@
clocks = <&usb_clocks CLK_BUS_HCI2>;
resets = <&usb_clocks RST_USB2_HCI>;
phys = <&usbphy3>;
- phy-names = "usb";
status = "disabled";
};
@@ -418,7 +414,6 @@
<&usb_clocks CLK_USB_OHCI2>;
resets = <&usb_clocks RST_USB2_HCI>;
phys = <&usbphy3>;
- phy-names = "usb";
status = "disabled";
};
@@ -527,7 +522,7 @@
};
gic: interrupt-controller@1c41000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c41000 0x1000>,
<0x01c42000 0x2000>,
<0x01c44000 0x2000>,
@@ -596,12 +591,9 @@
#size-cells = <0>;
fe0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- fe0_out_deu0: endpoint@0 {
- reg = <0>;
+ fe0_out_deu0: endpoint {
remote-endpoint = <&deu0_in_fe0>;
};
};
@@ -623,12 +615,9 @@
#size-cells = <0>;
fe1_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- fe1_out_deu1: endpoint@0 {
- reg = <0>;
+ fe1_out_deu1: endpoint {
remote-endpoint = <&deu1_in_fe1>;
};
};
@@ -666,12 +655,9 @@
};
be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- be0_out_drc0: endpoint@0 {
- reg = <0>;
+ be0_out_drc0: endpoint {
remote-endpoint = <&drc0_in_be0>;
};
};
@@ -709,12 +695,9 @@
};
be1_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- be1_out_drc1: endpoint@0 {
- reg = <0>;
+ be1_out_drc1: endpoint {
remote-endpoint = <&drc1_in_be1>;
};
};
@@ -738,12 +721,9 @@
#size-cells = <0>;
deu0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- deu0_in_fe0: endpoint@0 {
- reg = <0>;
+ deu0_in_fe0: endpoint {
remote-endpoint = <&fe0_out_deu0>;
};
};
@@ -783,12 +763,9 @@
#size-cells = <0>;
deu1_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- deu1_in_fe1: endpoint@0 {
- reg = <0>;
+ deu1_in_fe1: endpoint {
remote-endpoint = <&fe1_out_deu1>;
};
};
@@ -828,23 +805,17 @@
#size-cells = <0>;
drc0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- drc0_in_be0: endpoint@0 {
- reg = <0>;
+ drc0_in_be0: endpoint {
remote-endpoint = <&be0_out_drc0>;
};
};
drc0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- drc0_out_tcon0: endpoint@0 {
- reg = <0>;
+ drc0_out_tcon0: endpoint {
remote-endpoint = <&tcon0_in_drc0>;
};
};
@@ -868,23 +839,17 @@
#size-cells = <0>;
drc1_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- drc1_in_be1: endpoint@0 {
- reg = <0>;
+ drc1_in_be1: endpoint {
remote-endpoint = <&be1_out_drc1>;
};
};
drc1_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- drc1_out_tcon1: endpoint@0 {
- reg = <0>;
+ drc1_out_tcon1: endpoint {
remote-endpoint = <&tcon1_in_drc1>;
};
};
@@ -900,25 +865,21 @@
resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>;
reset-names = "lcd", "edp";
clock-output-names = "tcon0-pixel-clock";
+ #clock-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- tcon0_in_drc0: endpoint@0 {
- reg = <0>;
+ tcon0_in_drc0: endpoint {
remote-endpoint = <&drc0_out_tcon0>;
};
};
tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
};
};
@@ -938,19 +899,14 @@
#size-cells = <0>;
tcon1_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- tcon1_in_drc1: endpoint@0 {
- reg = <0>;
+ tcon1_in_drc1: endpoint {
remote-endpoint = <&drc1_out_tcon1>;
};
};
tcon1_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
};
};
@@ -997,15 +953,13 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
- #size-cells = <0>;
#gpio-cells = <3>;
gmac_rgmii_pins: gmac-rgmii-pins {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- "PA4", "PA5", "PA7", "PA8",
- "PA9", "PA10", "PA12", "PA13",
- "PA15", "PA16", "PA17";
- allwinner,function = "gmac";
+ pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5",
+ "PA7", "PA8", "PA9", "PA10", "PA12",
+ "PA13", "PA15", "PA16", "PA17";
+ function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index 3bed375b9c03..39263e74fbb5 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -69,7 +69,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
pwr_led {
label = "bananapi-m2-plus:red:pwr";
@@ -80,7 +79,6 @@
gpio_keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
sw4 {
label = "power";
@@ -101,7 +99,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc 1>;
clock-names = "ext_clock";
@@ -153,7 +150,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
@@ -210,7 +207,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index d74a6cbbfdf4..84977d4eb97a 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -227,6 +227,11 @@
#size-cells = <0>;
};
+ sid: eeprom@1c14000 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x1c14000 0x400>;
+ };
+
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-h3-musb";
reg = <0x01c19000 0x400>;
@@ -237,6 +242,7 @@
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
+ dr_mode = "otg";
status = "disabled";
};
@@ -298,7 +304,6 @@
clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -310,7 +315,6 @@
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -321,7 +325,6 @@
clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -333,7 +336,6 @@
<&ccu CLK_USB_OHCI2>;
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
- phy-names = "usb";
status = "disabled";
};
@@ -344,7 +346,6 @@
clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
phys = <&usbphy 3>;
- phy-names = "usb";
status = "disabled";
};
@@ -356,7 +357,6 @@
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
phys = <&usbphy 3>;
- phy-names = "usb";
status = "disabled";
};
@@ -381,14 +381,14 @@
interrupt-controller;
#interrupt-cells = <3>;
- csi_pins: csi {
+ csi_pins: csi-pins {
pins = "PE0", "PE2", "PE3", "PE4", "PE5",
"PE6", "PE7", "PE8", "PE9", "PE10",
"PE11";
function = "csi";
};
- emac_rgmii_pins: emac0 {
+ emac_rgmii_pins: emac-rgmii-pins {
pins = "PD0", "PD1", "PD2", "PD3", "PD4",
"PD5", "PD7", "PD8", "PD9", "PD10",
"PD12", "PD13", "PD15", "PD16", "PD17";
@@ -396,22 +396,22 @@
drive-strength = <40>;
};
- i2c0_pins: i2c0 {
+ i2c0_pins: i2c0-pins {
pins = "PA11", "PA12";
function = "i2c0";
};
- i2c1_pins: i2c1 {
+ i2c1_pins: i2c1-pins {
pins = "PA18", "PA19";
function = "i2c1";
};
- i2c2_pins: i2c2 {
+ i2c2_pins: i2c2-pins {
pins = "PE12", "PE13";
function = "i2c2";
};
- mmc0_pins: mmc0 {
+ mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
@@ -419,7 +419,7 @@
bias-pull-up;
};
- mmc1_pins: mmc1 {
+ mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
@@ -427,7 +427,7 @@
bias-pull-up;
};
- mmc2_8bit_pins: mmc2_8bit {
+ mmc2_8bit_pins: mmc2-8bit-pins {
pins = "PC5", "PC6", "PC8",
"PC9", "PC10", "PC11",
"PC12", "PC13", "PC14",
@@ -437,47 +437,47 @@
bias-pull-up;
};
- spdif_tx_pins_a: spdif {
+ spdif_tx_pin: spdif-tx-pin {
pins = "PA17";
function = "spdif";
};
- spi0_pins: spi0 {
+ spi0_pins: spi0-pins {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
};
- spi1_pins: spi1 {
+ spi1_pins: spi1-pins {
pins = "PA15", "PA16", "PA14", "PA13";
function = "spi1";
};
- uart0_pins_a: uart0 {
+ uart0_pa_pins: uart0-pa-pins {
pins = "PA4", "PA5";
function = "uart0";
};
- uart1_pins: uart1 {
+ uart1_pins: uart1-pins {
pins = "PG6", "PG7";
function = "uart1";
};
- uart1_rts_cts_pins: uart1_rts_cts {
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
pins = "PG8", "PG9";
function = "uart1";
};
- uart2_pins: uart2 {
+ uart2_pins: uart2-pins {
pins = "PA0", "PA1";
function = "uart2";
};
- uart3_pins: uart3 {
+ uart3_pins: uart3-pins {
pins = "PA13", "PA14";
function = "uart3";
};
- uart3_rts_cts_pins: uart3_rts_cts {
+ uart3_rts_cts_pins: uart3-rts-cts-pins {
pins = "PA15", "PA16";
function = "uart3";
};
@@ -855,12 +855,12 @@
interrupt-controller;
#interrupt-cells = <3>;
- ir_pins_a: ir {
+ r_ir_rx_pin: r-ir-rx-pin {
pins = "PL11";
function = "s_cir_rx";
};
- r_i2c_pins: r-i2c {
+ r_i2c_pins: r-i2c-pins {
pins = "PL0", "PL1";
function = "s_i2c";
};
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
index 1eadc132390c..19b3b23cfaa8 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -167,7 +167,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
@@ -205,7 +205,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
index ca2c3a557895..d18eaf4a4a3a 100644
--- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
@@ -1,42 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
- * Copyright 2016 Toradex AG
+ * Copyright 2016-2019 Toradex AG
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index eaee10ef6512..ceb3f6388c7d 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
- * Copyright 2016-2018 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2019 Toradex AG
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index 7961eb4bd803..826b776fbe6f 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2016-2018 Toradex AG
*/
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 367eb8c86098..0462ed2dd8b8 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2016-2018 Toradex AG
*/
@@ -17,6 +17,7 @@
pcie@1003000 {
status = "okay";
+
avddio-pex-supply = <&reg_1v05_vdd>;
avdd-pex-pll-supply = <&reg_1v05_vdd>;
avdd-pll-erefe-supply = <&reg_1v05_avdd>;
@@ -1796,6 +1797,7 @@
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
+
avddio-pex-supply = <&reg_1v05_vdd>;
avdd-pll-erefe-supply = <&reg_1v05_avdd>;
avdd-pll-utmip-supply = <&reg_1v8_vddio>;
@@ -1807,6 +1809,11 @@
};
padctl@7009f000 {
+ avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+ avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+ avdd-pex-pll-supply = <&reg_1v05_vdd>;
+ hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+
pads {
usb2 {
status = "okay";
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 13c93cd507d8..d1e8593ef0d9 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
- * Copyright 2016-2018 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2019 Toradex AG
*/
#include "tegra124.dtsi"
@@ -1837,6 +1801,11 @@
};
padctl@7009f000 {
+ avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+ avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+ avdd-pex-pll-supply = <&reg_1v05_vdd>;
+ hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+
pads {
usb2 {
status = "okay";
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 33bbb1c5285d..d5fd642f8b77 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1721,6 +1721,11 @@
padctl@7009f000 {
status = "okay";
+ avdd-pll-utmip-supply = <&vddio_1v8>;
+ avdd-pll-erefe-supply = <&avdd_1v05_run>;
+ avdd-pex-pll-supply = <&vdd_1v05_run>;
+ hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
pads {
usb2 {
status = "okay";
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index a1acd872bcf2..3b10f475037f 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -414,6 +414,11 @@
padctl@7009f000 {
status = "okay";
+ avdd-pll-utmip-supply = <&vddio_1v8>;
+ avdd-pll-erefe-supply = <&avdd_1v05_run>;
+ avdd-pex-pll-supply = <&vdd_1v05_run>;
+ hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
pads {
usb2 {
status = "okay";
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 4882b61fb680..5d5e6e18bc7b 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -921,6 +921,11 @@
};
padctl@7009f000 {
+ avdd-pll-utmip-supply = <&vddio_1v8>;
+ avdd-pll-erefe-supply = <&avdd_1v05_run>;
+ avdd-pex-pll-supply = <&vdd_1v05_run>;
+ hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
pads {
usb2 {
status = "okay";
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index d2b553f76719..e074258d4518 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -370,6 +370,17 @@
reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
};
+ actmon@6000c800 {
+ compatible = "nvidia,tegra30-actmon";
+ reg = <0x6000c800 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_ACTMON>,
+ <&tegra_car TEGRA30_CLK_EMC>;
+ clock-names = "actmon", "emc";
+ resets = <&tegra_car TEGRA30_CLK_ACTMON>;
+ reset-names = "actmon";
+ };
+
gpio: gpio@6000d000 {
compatible = "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index 445c7dc306b2..9466913693ac 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -29,35 +29,30 @@
label = "zii:green:debug1";
gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
- max-brightness = <1>;
};
led-fail {
label = "zii:red:fail";
gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
default-state = "off";
- max-brightness = <1>;
};
led-status {
label = "zii:green:status";
gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
default-state = "off";
- max-brightness = <1>;
};
led-debug-a {
label = "zii:green:debug_a";
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
default-state = "off";
- max-brightness = <1>;
};
led-debug-b {
label = "zii:green:debug_b";
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
default-state = "off";
- max-brightness = <1>;
};
};
@@ -92,9 +87,14 @@
bus-num = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dspi1>;
- status = "okay";
-
- m25p128@0 {
+ /*
+ * Some CFU1s come with SPI-NOR chip DNPed, so we leave this
+ * node disabled by default and rely on bootloader to enable
+ * it when appropriate.
+ */
+ status = "disabled";
+
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p128", "jedec,spi-nor";
@@ -212,7 +212,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
- pca9554@22 {
+ io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
@@ -223,19 +223,23 @@
reg = <0x48>;
};
- at24c04@52 {
+ eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
label = "nvm";
};
- at24c04@54 {
+ eeprom@54 {
compatible = "atmel,24c04";
reg = <0x54>;
label = "nameplate";
};
};
+&snvsrtc {
+ status = "disabled";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index bd79e00bf615..48086c5e8549 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -1,45 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2015, 2016 Zodiac Inflight Innovations
- *
- * Based on an original 'vf610-twr.dts' which is Copyright 2015,
- * Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -334,11 +295,11 @@
gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH
+ cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
&gpio1 8 GPIO_ACTIVE_HIGH>;
num-chipselects = <2>;
- m25p128@0 {
+ flash@0 {
compatible = "m25p128", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -367,7 +328,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
- gpio5: pca9554@20 {
+ gpio5: io-expander@20 {
compatible = "nxp,pca9554";
reg = <0x20>;
gpio-controller;
@@ -375,7 +336,7 @@
};
- gpio6: pca9554@22 {
+ gpio6: io-expander@22 {
compatible = "nxp,pca9554";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pca9554_22>;
@@ -408,7 +369,7 @@
#size-cells = <0>;
reg = <0>;
- sfp1: at24c04@50 {
+ sfp1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
@@ -419,7 +380,7 @@
#size-cells = <0>;
reg = <1>;
- sfp2: at24c04@50 {
+ sfp2: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
@@ -430,7 +391,7 @@
#size-cells = <0>;
reg = <2>;
- sfp3: at24c04@50 {
+ sfp3: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
@@ -441,7 +402,7 @@
#size-cells = <0>;
reg = <3>;
- sfp4: at24c04@50 {
+ sfp4: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 6f4a5602cefd..778e02c000d1 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -1,45 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2015, 2016 Zodiac Inflight Innovations
- *
- * Based on an original 'vf610-twr.dts' which is Copyright 2015,
- * Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -277,7 +238,7 @@
status = "okay";
spi-num-chipselects = <2>;
- m25p128@0 {
+ flash@0 {
compatible = "m25p128", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -313,7 +274,7 @@
* P1 - WE2_CMD
* P2 - WE2_CLK
*/
- gpio5: pca9557@18 {
+ gpio5: io-expander@18 {
compatible = "nxp,pca9557";
reg = <0x18>;
gpio-controller;
@@ -361,7 +322,7 @@
* IO0 - WE1_CLK
* IO1 - WE1_CMD
*/
- gpio7: pca9554@22 {
+ gpio7: io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
@@ -371,7 +332,7 @@
};
&i2c1 {
- at24mac602@50 {
+ eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
read-only;
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index 19eb4a849efb..0507e6dcbb21 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -138,7 +138,7 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
@@ -147,12 +147,12 @@
reg = <0x48>;
};
- at24c04@50 {
+ eeprom@50 {
compatible = "atmel,24c04";
reg = <0x50>;
};
- at24c04@52 {
+ eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index de6dfa57bec5..d7019e89f588 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -505,14 +505,14 @@
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
- gpio5: pca9554@20 {
+ gpio5: io-expander@20 {
compatible = "nxp,pca9554";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
- gpio6: pca9554@22 {
+ gpio6: io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
@@ -524,12 +524,12 @@
reg = <0x48>;
};
- at24c04@50 {
+ eeprom@50 {
compatible = "atmel,24c04";
reg = <0x50>;
};
- at24c04@52 {
+ eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};
@@ -577,7 +577,7 @@
reg = <0x4f>;
};
- gpio7: pca9555@23 {
+ gpio7: io-expander@23 {
compatible = "nxp,pca9555";
gpio-controller;
#gpio-cells = <2>;
@@ -671,6 +671,10 @@
};
};
+&snvsrtc {
+ status = "disabled";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
new file mode 100644
index 000000000000..9dde83ccb9d1
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SPB4 board
+ *
+ * SPB - Seat Power Box
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 SPB4 Board";
+ compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&adc0 {
+ vref-supply = <&reg_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <&reg_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ no-sdio;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
+ reg = <0>;
+ eeprom-length = <65536>;
+ reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_1000_1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_cu_1000_2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_cu_1000_3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_cu_1000_4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_cu_1000_5";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_cu_1000_6";
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ io-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ label = "nameplate";
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+};
+
+&snvsrtc {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+
+ rave-sp {
+ compatible = "zii,rave-sp-rdu2";
+ current-speed = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ watchdog {
+ compatible = "zii,rave-sp-watchdog";
+ };
+
+ eeprom@a3 {
+ compatible = "zii,rave-sp-eeprom";
+ reg = <0xa3 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ zii,eeprom-name = "main-eeprom";
+ };
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&wdoga5 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTD4__DSPI1_CS1 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ fsl,pins = <
+ VF610_PAD_PTE2__GPIO_107 0x31c2
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD3__GPIO_82 0x31c2
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA30__UART3_TX 0x21a2
+ VF610_PAD_PTA31__UART3_RX 0x21a1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index 2b10672fadbd..847c5858fea1 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -37,7 +37,6 @@
label = "zii:green:debug1";
gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
- max-brightness = <1>;
};
};
@@ -211,6 +210,10 @@
};
};
+&snvsrtc {
+ status = "disabled";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index 0d9fe5ac83a3..453fce80f858 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -37,7 +37,6 @@
label = "zii:green:debug1";
gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
- max-brightness = <1>;
};
};
@@ -70,7 +69,7 @@
*/
status = "disabled";
- m25p128@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p128", "jedec,spi-nor";
@@ -195,7 +194,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
- gpio6: pca9505@22 {
+ gpio6: io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
@@ -207,18 +206,22 @@
reg = <0x48>;
};
- at24c04@50 {
+ eeprom@50 {
compatible = "atmel,24c04";
reg = <0x50>;
label = "nameplate";
};
- at24c04@52 {
+ eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};
};
+&snvsrtc {
+ status = "disabled";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
@@ -250,6 +253,10 @@
};
};
+&wdoga5 {
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_dspi1: dspi1grp {
fsl,pins = <
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index b5ca9c50876d..0f4d91824e4b 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -7,6 +7,11 @@ config ARCH_ACTIONS
help
This enables support for the Actions Semiconductor S900 SoC family.
+config ARCH_AGILEX
+ bool "Intel's Agilex SoCFPGA Family"
+ help
+ This enables support for Intel's Agilex SoCFPGA Family.
+
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
select ARCH_HAS_RESET_CONTROLLER
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 5bc7533a12c7..f19b762c008d 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -13,6 +13,7 @@ subdir-y += cavium
subdir-y += exynos
subdir-y += freescale
subdir-y += hisilicon
+subdir-y += intel
subdir-y += lg
subdir-y += marvell
subdir-y += mediatek
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 0b0917111099..f6db0611cb85 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -2,6 +2,7 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5205-5inmfd.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
@@ -19,6 +20,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-beelink-gs1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
index 6cb2b7f0c817..019ae09ea0fd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -22,6 +22,41 @@
stdout-path = "serial0:115200n8";
};
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi_mclk_pin>;
+ clocks = <&ccu CLK_CSI_MCLK>;
+ clock-names = "xclk";
+
+ AVDD-supply = <&reg_aldo1>;
+ DOVDD-supply = <&reg_dldo3>;
+ DVDD-supply = <&reg_eldo3>;
+ reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */
+ powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */
+
+ port {
+ ov5640_ep: endpoint {
+ remote-endpoint = <&csi_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+ };
+
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc 1>;
@@ -30,10 +65,40 @@
};
};
+&csi {
+ status = "okay";
+
+ port {
+ csi_ep: endpoint {
+ remote-endpoint = <&ov5640_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
&ehci0 {
status = "okay";
};
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ sensor@48 {
+ compatible = "st,stlm75";
+ reg = <0x48>;
+ };
+};
+
+&i2c0_pins {
+ bias-pull-up;
+};
+
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
new file mode 100644
index 000000000000..6a2154525d1e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Oceanic Systems (UK) Ltd.
+ * Copyright (C) 2019 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+ model = "Oceanic 5205 5inMFD";
+ compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <&reg_dc1sw>;
+ allwinner,tx-delay-ps = <600>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&reg_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 78c82a665c84..2b6345db7dc0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -104,7 +104,6 @@
&ehci0 {
phys = <&usbphy 0>;
- phy-names = "usb";
status = "okay";
};
@@ -151,7 +150,6 @@
&ohci0 {
phys = <&usbphy 0>;
- phy-names = "usb";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 7b7b14ba58e6..0ec46b969a75 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -21,6 +21,15 @@
serial0 = &uart0;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 0>;
+ power-supply = <&reg_dcdc1>;
+ brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>;
+ default-brightness-level = <5>;
+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+ };
+
chosen {
stdout-path = "serial0:115200n8";
@@ -131,6 +140,10 @@
status = "okay";
};
+&pwm {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index e628d063931b..8c5b521e6389 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -217,7 +217,7 @@
#size-cells = <1>;
ranges;
- de2@1000000 {
+ bus@1000000 {
compatible = "allwinner,sun50i-a64-de2";
reg = <0x1000000 0x400000>;
allwinner,sram = <&de2_sram 1>;
@@ -251,11 +251,19 @@
#size-cells = <0>;
mixer0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
- mixer0_out_tcon0: endpoint {
+ mixer0_out_tcon0: endpoint@0 {
+ reg = <0>;
remote-endpoint = <&tcon0_in_mixer0>;
};
+
+ mixer0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_mixer0>;
+ };
};
};
};
@@ -274,9 +282,17 @@
#size-cells = <0>;
mixer1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
- mixer1_out_tcon1: endpoint {
+ mixer1_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_mixer1>;
+ };
+
+ mixer1_out_tcon1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&tcon1_in_mixer1>;
};
};
@@ -338,6 +354,7 @@
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-pixel-clock";
+ #clock-cells = <0>;
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
@@ -354,6 +371,11 @@
reg = <0>;
remote-endpoint = <&mixer0_out_tcon0>;
};
+
+ tcon0_in_mixer1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mixer1_out_tcon0>;
+ };
};
tcon0_out: port@1 {
@@ -379,9 +401,17 @@
#size-cells = <0>;
tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
- tcon1_in_mixer1: endpoint {
+ tcon1_in_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer0_out_tcon1>;
+ };
+
+ tcon1_in_mixer1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&mixer1_out_tcon1>;
};
};
@@ -467,6 +497,7 @@
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
+ dr_mode = "otg";
status = "disabled";
};
@@ -522,7 +553,6 @@
resets = <&ccu RST_BUS_OHCI1>,
<&ccu RST_BUS_EHCI1>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -534,7 +564,6 @@
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
- phy-names = "usb";
status = "disabled";
};
@@ -553,7 +582,8 @@
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 58>;
+ clocks = <&ccu 58>, <&osc24M>, <&rtc 0>;
+ clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
@@ -565,12 +595,18 @@
function = "csi";
};
- i2c0_pins: i2c0_pins {
+ /omit-if-no-ref/
+ csi_mclk_pin: csi-mclk-pin {
+ pins = "PE1";
+ function = "csi";
+ };
+
+ i2c0_pins: i2c0-pins {
pins = "PH0", "PH1";
function = "i2c0";
};
- i2c1_pins: i2c1_pins {
+ i2c1_pins: i2c1-pins {
pins = "PH2", "PH3";
function = "i2c1";
};
@@ -607,19 +643,19 @@
bias-pull-up;
};
- pwm_pin: pwm_pin {
+ pwm_pin: pwm-pin {
pins = "PD22";
function = "pwm";
};
- rmii_pins: rmii_pins {
+ rmii_pins: rmii-pins {
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
"PD18", "PD19", "PD20", "PD22", "PD23";
function = "emac";
drive-strength = <40>;
};
- rgmii_pins: rgmii_pins {
+ rgmii_pins: rgmii-pins {
pins = "PD8", "PD9", "PD10", "PD11", "PD12",
"PD13", "PD15", "PD16", "PD17", "PD18",
"PD19", "PD20", "PD21", "PD22", "PD23";
@@ -627,17 +663,17 @@
drive-strength = <40>;
};
- spdif_tx_pin: spdif {
+ spdif_tx_pin: spdif-tx-pin {
pins = "PH8";
function = "spdif";
};
- spi0_pins: spi0 {
+ spi0_pins: spi0-pins {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
};
- spi1_pins: spi1 {
+ spi1_pins: spi1-pins {
pins = "PD0", "PD1", "PD2", "PD3";
function = "spi1";
};
@@ -647,12 +683,12 @@
function = "uart0";
};
- uart1_pins: uart1_pins {
+ uart1_pins: uart1-pins {
pins = "PG6", "PG7";
function = "uart1";
};
- uart1_rts_cts_pins: uart1_rts_cts_pins {
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
pins = "PG8", "PG9";
function = "uart1";
};
@@ -730,7 +766,6 @@
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
clock-names = "apb", "mod";
resets = <&ccu RST_BUS_CODEC>;
- reset-names = "rst";
dmas = <&dma 15>, <&dma 15>;
dma-names = "rx", "tx";
status = "disabled";
@@ -1064,12 +1099,12 @@
function = "s_i2c";
};
- r_pwm_pin: pwm {
+ r_pwm_pin: r-pwm-pin {
pins = "PL10";
function = "s_pwm";
};
- r_rsb_pins: rsb {
+ r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
index 85e7993a74e7..62409afbaf06 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -46,7 +46,6 @@
vdd_cpux: gpio-regulator {
compatible = "regulator-gpio";
- pinctrl-names = "default";
regulator-name = "vdd-cpux";
regulator-type = "voltage";
regulator-boot-on;
@@ -133,7 +132,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
index e4d50373c8ef..82f4b44d525f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
@@ -21,7 +21,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
post-power-on-delay-ms = <200>;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 506e25ba028a..9887948d5c86 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -78,7 +78,6 @@
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -96,7 +95,6 @@
vdd_cpux: gpio-regulator {
compatible = "regulator-gpio";
- pinctrl-names = "default";
regulator-name = "vdd-cpux";
regulator-type = "voltage";
regulator-boot-on;
@@ -112,7 +110,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
post-power-on-delay-ms = <200>;
};
@@ -191,7 +188,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index cc268a69786c..57a6f45036c1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -142,7 +142,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 3e0d5a9c096d..e126c1c9f05c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -180,7 +180,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
@@ -221,7 +221,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index b75ca4d7d001..d9b3ed257088 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -187,7 +187,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
@@ -224,7 +224,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index 1238de25a969..db6ea7b58999 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -127,7 +127,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index 53c8c11620e0..dacf61399527 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -78,7 +78,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
post-power-on-delay-ms = <200>;
};
@@ -134,7 +133,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 96acafd3a852..f002a496d7cb 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -209,3 +209,7 @@
&rtc {
compatible = "allwinner,sun50i-h5-rtc";
};
+
+&sid {
+ compatible = "allwinner,sun50i-h5-sid";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
new file mode 100644
index 000000000000..0dc33c90dd60
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Beelink GS1";
+ compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "beelink:white:power";
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ default-state = "on";
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC jack */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ext_rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <&reg_aldo2>;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <&reg_cldo1>;
+ vqmmc-supply = <&reg_bldo2>;
+ non-removable;
+ cap-mmc-hw-reset;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pd-supply = <&reg_cldo1>;
+ vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp805: pmic@36 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x36>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+ vina-supply = <&reg_vcc5v>;
+ vinb-supply = <&reg_vcc5v>;
+ vinc-supply = <&reg_vcc5v>;
+ vind-supply = <&reg_vcc5v>;
+ vine-supply = <&reg_vcc5v>;
+ aldoin-supply = <&reg_vcc5v>;
+ bldoin-supply = <&reg_vcc5v>;
+ cldoin-supply = <&reg_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-ac200";
+ regulator-enable-ramp-delay = <100000>;
+ };
+
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc25-dram";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-io";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dcxoio";
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+ };
+
+ reg_cldo2: cldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <960000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&r_pio {
+ /*
+ * PL0 and PL1 are used for PMIC I2C
+ * don't enable the pl-supply else
+ * it will fail at boot
+ *
+ * vcc-pl-supply = <&reg_aldo1>;
+ */
+ vcc-pm-supply = <&reg_aldo1>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usb2otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy {
+ usb0_vbus-supply = <&reg_vcc5v>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
new file mode 100644
index 000000000000..17d496990108
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi 3";
+ compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "orangepi:red:power";
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ default-state = "on";
+ };
+
+ status {
+ label = "orangepi:green:status";
+ gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC jack */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <&reg_bldo2>;
+ vcc-pd-supply = <&reg_cldo1>;
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp805: pmic@36 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x36>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+ vina-supply = <&reg_vcc5v>;
+ vinb-supply = <&reg_vcc5v>;
+ vinc-supply = <&reg_vcc5v>;
+ vind-supply = <&reg_vcc5v>;
+ vine-supply = <&reg_vcc5v>;
+ aldoin-supply = <&reg_vcc5v>;
+ bldoin-supply = <&reg_vcc5v>;
+ cldoin-supply = <&reg_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl-led-ir";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-audio-tv-ephy-mac";
+ };
+
+ /* ALDO3 is shorted to CLDO1 */
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18-dram-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-pc";
+ };
+
+ bldo3 {
+ /* unused */
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+ };
+
+ cldo2 {
+ /* unused */
+ };
+
+ cldo3 {
+ /* unused */
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <960000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usb2otg {
+ /*
+ * This board doesn't have a controllable VBUS even though it
+ * does have an ID pin. Using it as anything but a USB host is
+ * unsafe.
+ */
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy {
+ usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+ usb0_vbus-supply = <&reg_vcc5v>;
+ usb3_vbus-supply = <&reg_vcc5v>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index b2526dac2fcf..62e27948a3fa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -56,8 +56,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
bus-width = <4>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index bdb8470fc8dc..4802902e128f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -104,8 +104,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
bus-width = <4>;
@@ -113,8 +111,6 @@
};
&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_cldo1>;
vqmmc-supply = <&reg_bldo2>;
non-removable;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index c9e861a50a63..16c5c3d0fd81 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -101,7 +101,7 @@
#size-cells = <1>;
ranges;
- display-engine@1000000 {
+ bus@1000000 {
compatible = "allwinner,sun50i-h6-de3",
"allwinner,sun50i-a64-de2";
reg = <0x1000000 0x400000>;
@@ -146,6 +146,17 @@
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun50i-h6-video-engine";
+ reg = <0x01c0e000 0x2000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_MBUS_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
syscon: syscon@3000000 {
compatible = "allwinner,sun50i-h6-system-control",
"allwinner,sun50i-a64-system-control";
@@ -192,6 +203,11 @@
#reset-cells = <1>;
};
+ sid: sid@3006000 {
+ compatible = "allwinner,sun50i-h6-sid";
+ reg = <0x03006000 0x400>;
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
@@ -206,7 +222,7 @@
interrupt-controller;
#interrupt-cells = <3>;
- ext_rgmii_pins: rgmii_pins {
+ ext_rgmii_pins: rgmii-pins {
pins = "PD0", "PD1", "PD2", "PD3", "PD4",
"PD5", "PD7", "PD8", "PD9", "PD10",
"PD11", "PD12", "PD13", "PD19", "PD20";
@@ -227,6 +243,15 @@
bias-pull-up;
};
+ /omit-if-no-ref/
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
mmc2_pins: mmc2-pins {
pins = "PC1", "PC4", "PC5", "PC6",
"PC7", "PC8", "PC9", "PC10",
@@ -236,7 +261,7 @@
bias-pull-up;
};
- uart0_ph_pins: uart0-ph {
+ uart0_ph_pins: uart0-ph-pins {
pins = "PH0", "PH1";
function = "uart0";
};
@@ -262,6 +287,8 @@
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -276,6 +303,8 @@
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -290,6 +319,8 @@
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -425,7 +456,6 @@
resets = <&ccu RST_BUS_OHCI3>,
<&ccu RST_BUS_EHCI3>;
phys = <&usb2phy 3>;
- phy-names = "usb";
status = "disabled";
};
@@ -437,7 +467,6 @@
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_OHCI3>;
phys = <&usb2phy 3>;
- phy-names = "usb";
status = "disabled";
};
@@ -614,7 +643,7 @@
interrupt-controller;
#interrupt-cells = <3>;
- r_i2c_pins: r-i2c {
+ r_i2c_pins: r-i2c-pins {
pins = "PL0", "PL1";
function = "s_i2c";
};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 2e3863ee12b3..d037563ad21c 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -107,6 +107,7 @@
&mmc {
status = "okay";
cap-sd-highspeed;
+ cap-mmc-highspeed;
broken-cd;
bus-width = <4>;
};
@@ -159,7 +160,7 @@
#size-cells = <1>;
compatible = "n25q00a";
reg = <0>;
- spi-max-frequency = <50000000>;
+ spi-max-frequency = <100000000>;
m25p,fast-read;
cdns,page-size = <256>;
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0821fed4c074..e129c03ced14 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
new file mode 100644
index 000000000000..34b40587e5ef
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+ compatible = "seirobotics,sei510", "amlogic,g12a";
+ model = "SEI Robotics SEI510";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ adc_keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+
+ button-onoff {
+ label = "On/Off";
+ linux,code = <KEY_POWER>;
+ press-threshold-microvolt = <1700000>;
+ };
+ };
+
+ ao_5v: regulator-ao_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "AO_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ emmc_1v8: regulator-emmc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ reserved-memory {
+ /* TEE Reserved Memory */
+ bl32_reserved: bl32@5000000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ vddao_3v3_t: regultor-vddao_3v3_t {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3_T";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ };
+
+ vddio_ao1v8: regulator-vddio_ao1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+};
+
+&cec_AO {
+ pinctrl-0 = <&cec_ao_a_h_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao1v8>;
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index c44dbdddf2cf..0e8045b8a915 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -6,6 +6,8 @@
/dts-v1/;
#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
/ {
compatible = "amlogic,u200", "amlogic,g12a";
@@ -21,9 +23,154 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ flash_1v8: regulator-flash_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "FLASH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ main_12v: regulator-main_12v {
+ compatible = "regulator-fixed";
+ regulator-name = "12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ /* FIXME: actually controlled by VDDCPU_B_EN */
+ };
+
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ };
+
+ usb_pwr_en: regulator-usb_pwr_en {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR_EN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vddao_1v8: regulator-vddao_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&main_12v>;
+ regulator-always-on;
+ };
+
+};
+
+&cec_AO {
+ pinctrl-0 = <&cec_ao_a_h_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
};
&uart_AO {
status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
};
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+ phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+ phy-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index c62d3d5706ff..b3d913f28f12 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -6,6 +6,8 @@
/dts-v1/;
#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
/ {
compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a";
@@ -21,8 +23,146 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ flash_1v8: regulator-flash_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "FLASH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ /* FIXME: actually controlled by VDDCPU_B_EN */
+ };
+
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-low;
+ };
+
+ vddao_1v8: regulator-vddao_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+};
+
+&cec_AO {
+ pinctrl-0 = <&cec_ao_a_h_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ };
};
&uart_AO {
status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 17c6217f8a84..9f72396ba710 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -3,9 +3,13 @@
* Copyright (c) 2018 Amlogic, Inc. All rights reserved.
*/
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/clock/g12a-aoclkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
/ {
compatible = "amlogic,g12a";
@@ -55,6 +59,14 @@
};
};
+ efuse: efuse {
+ compatible = "amlogic,meson-gxbb-efuse";
+ clocks = <&clkc CLKID_EFUSE>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ read-only;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -70,6 +82,18 @@
reg = <0x0 0x05000000 0x0 0x300000>;
no-map;
};
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x10000000>;
+ alignment = <0x0 0x400000>;
+ linux,cma-default;
+ };
+ };
+
+ sm: secure-monitor {
+ compatible = "amlogic,meson-gxbb-sm";
};
soc {
@@ -85,12 +109,177 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+ hdmi_tx: hdmi-tx@0 {
+ compatible = "amlogic,meson-g12a-dw-hdmi";
+ reg = <0x0 0x0 0x0 0x10000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMITX_PHY>,
+ <&reset RESET_HDMITX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI>,
+ <&clkc CLKID_HTX_PCLK>,
+ <&clkc CLKID_VPU_INTR>;
+ clock-names = "isfr", "iahb", "venci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ /* VPU VENC Input */
+ hdmi_tx_venc_port: port@0 {
+ reg = <0>;
+
+ hdmi_tx_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+
+ /* TMDS Output */
+ hdmi_tx_tmds_port: port@1 {
+ reg = <1>;
+ };
+ };
+
periphs: bus@34400 {
compatible = "simple-bus";
reg = <0x0 0x34400 0x0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+
+ periphs_pinctrl: pinctrl@40 {
+ compatible = "amlogic,meson-g12a-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio: bank@40 {
+ reg = <0x0 0x40 0x0 0x4c>,
+ <0x0 0xe8 0x0 0x18>,
+ <0x0 0x120 0x0 0x18>,
+ <0x0 0x2c0 0x0 0x40>,
+ <0x0 0x340 0x0 0x1c>;
+ reg-names = "gpio",
+ "pull",
+ "pull-enable",
+ "mux",
+ "ds";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 86>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+
+ cec_ao_b_h_pins: cec_ao_b_h {
+ mux {
+ groups = "cec_ao_b_h";
+ function = "cec_ao_b_h";
+ bias-disable;
+ };
+ };
+
+ hdmitx_ddc_pins: hdmitx_ddc {
+ mux {
+ groups = "hdmitx_sda",
+ "hdmitx_sck";
+ function = "hdmitx";
+ bias-disable;
+ };
+ };
+
+ hdmitx_hpd_pins: hdmitx_hpd {
+ mux {
+ groups = "hdmitx_hpd_in";
+ function = "hdmitx";
+ bias-disable;
+ };
+ };
+
+ uart_a_pins: uart-a {
+ mux {
+ groups = "uart_a_tx",
+ "uart_a_rx";
+ function = "uart_a";
+ bias-disable;
+ };
+ };
+
+ uart_a_cts_rts_pins: uart-a-cts-rts {
+ mux {
+ groups = "uart_a_cts",
+ "uart_a_rts";
+ function = "uart_a";
+ bias-disable;
+ };
+ };
+
+ uart_b_pins: uart-b {
+ mux {
+ groups = "uart_b_tx",
+ "uart_b_rx";
+ function = "uart_b";
+ bias-disable;
+ };
+ };
+
+ uart_c_pins: uart-c {
+ mux {
+ groups = "uart_c_tx",
+ "uart_c_rx";
+ function = "uart_c";
+ bias-disable;
+ };
+ };
+
+ uart_c_cts_rts_pins: uart-c-cts-rts {
+ mux {
+ groups = "uart_c_cts",
+ "uart_c_rts";
+ function = "uart_c";
+ bias-disable;
+ };
+ };
+ };
+ };
+
+ usb2_phy0: phy@36000 {
+ compatible = "amlogic,g12a-usb2-phy";
+ reg = <0x0 0x36000 0x0 0x2000>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ resets = <&reset RESET_USB_PHY20>;
+ reset-names = "phy";
+ #phy-cells = <0>;
+ };
+
+ dmc: bus@38000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x38000 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+
+ canvas: video-lut@48 {
+ compatible = "amlogic,canvas";
+ reg = <0x0 0x48 0x0 0x14>;
+ };
+ };
+
+ usb2_phy1: phy@3a000 {
+ compatible = "amlogic,g12a-usb2-phy";
+ reg = <0x0 0x3a000 0x0 0x2000>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ resets = <&reset RESET_USB_PHY21>;
+ reset-names = "phy";
+ #phy-cells = <0>;
};
hiu: bus@3c000 {
@@ -113,6 +302,18 @@
};
};
};
+
+ usb3_pcie_phy: phy@46000 {
+ compatible = "amlogic,g12a-usb3-pcie-phy";
+ reg = <0x0 0x46000 0x0 0x2000>;
+ clocks = <&clkc CLKID_PCIE_PLL>;
+ clock-names = "ref_clk";
+ resets = <&reset RESET_PCIE_PHY>;
+ reset-names = "phy";
+ assigned-clocks = <&clkc CLKID_PCIE_PLL>;
+ assigned-clock-rates = <100000000>;
+ #phy-cells = <1>;
+ };
};
aobus: bus@ff800000 {
@@ -122,6 +323,128 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+ rti: sys-ctrl@0 {
+ compatible = "amlogic,meson-gx-ao-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0x0 0x0 0x0 0x100>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
+
+ clkc_AO: clock-controller {
+ compatible = "amlogic,meson-g12a-aoclkc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clocks = <&xtal>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "mpeg-clk";
+ };
+
+ pwrc_vpu: power-controller-vpu {
+ compatible = "amlogic,meson-g12a-pwrc-vpu";
+ #power-domain-cells = <0>;
+ amlogic,hhi-sysctrl = <&hhi>;
+ resets = <&reset RESET_VIU>,
+ <&reset RESET_VENC>,
+ <&reset RESET_VCBUS>,
+ <&reset RESET_BT656>,
+ <&reset RESET_RDMA>,
+ <&reset RESET_VENCI>,
+ <&reset RESET_VENCP>,
+ <&reset RESET_VDAC>,
+ <&reset RESET_VDI6>,
+ <&reset RESET_VENCL>,
+ <&reset RESET_VID_LOCK>;
+ clocks = <&clkc CLKID_VPU>,
+ <&clkc CLKID_VAPB>;
+ clock-names = "vpu", "vapb";
+ /*
+ * VPU clocking is provided by two identical clock paths
+ * VPU_0 and VPU_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ * Same for VAPB but with a final gate after the glitch free mux.
+ */
+ assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+ <&clkc CLKID_VPU_0>,
+ <&clkc CLKID_VPU>, /* Glitch free mux */
+ <&clkc CLKID_VAPB_0_SEL>,
+ <&clkc CLKID_VAPB_0>,
+ <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_VPU_0>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_VAPB_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>, /* Do Nothing */
+ <0>, /* Do Nothing */
+ <250000000>,
+ <0>; /* Do Nothing */
+ };
+
+ ao_pinctrl: pinctrl@14 {
+ compatible = "amlogic,meson-g12a-aobus-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio_ao: bank@14 {
+ reg = <0x0 0x14 0x0 0x8>,
+ <0x0 0x1c 0x0 0x8>,
+ <0x0 0x24 0x0 0x14>;
+ reg-names = "mux",
+ "ds",
+ "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ao_pinctrl 0 0 15>;
+ };
+
+ uart_ao_a_pins: uart-a-ao {
+ mux {
+ groups = "uart_ao_a_tx",
+ "uart_ao_a_rx";
+ function = "uart_ao_a";
+ bias-disable;
+ };
+ };
+
+ uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
+ mux {
+ groups = "uart_ao_a_cts",
+ "uart_ao_a_rts";
+ function = "uart_ao_a";
+ bias-disable;
+ };
+ };
+ };
+ };
+
+ cec_AO: cec@100 {
+ compatible = "amlogic,meson-gx-ao-cec";
+ reg = <0x0 0x00100 0x0 0x14>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_AO CLKID_AO_CEC>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ sec_AO: ao-secure@140 {
+ compatible = "amlogic,meson-gx-ao-secure", "syscon";
+ reg = <0x0 0x140 0x0 0x140>;
+ amlogic,has-chip-id;
+ };
+
+ cecb_AO: cec@280 {
+ compatible = "amlogic,meson-g12a-ao-cec";
+ reg = <0x0 0x00280 0x0 0x1c>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>;
+ clock-names = "oscin";
+ status = "disabled";
+ };
+
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
@@ -141,6 +464,46 @@
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
+
+ saradc: adc@9000 {
+ compatible = "amlogic,meson-g12a-saradc",
+ "amlogic,meson-saradc";
+ reg = <0x0 0x9000 0x0 0x48>;
+ #io-channel-cells = <1>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>,
+ <&clkc_AO CLKID_AO_SAR_ADC>,
+ <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+ <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+ clock-names = "clkin", "core", "adc_clk", "adc_sel";
+ status = "disabled";
+ };
+ };
+
+ vpu: vpu@ff900000 {
+ compatible = "amlogic,meson-g12a-vpu";
+ reg = <0x0 0xff900000 0x0 0x100000>,
+ <0x0 0xff63c000 0x0 0x1000>;
+ reg-names = "vpu", "hhi";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ amlogic,canvas = <&canvas>;
+ power-domains = <&pwrc_vpu>;
+
+ /* CVBS VDAC output port */
+ cvbs_vdac_port: port@0 {
+ reg = <0>;
+ };
+
+ /* HDMI-TX output port */
+ hdmi_tx_port: port@1 {
+ reg = <1>;
+
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_tx_in>;
+ };
+ };
};
gic: interrupt-controller@ffc01000 {
@@ -163,10 +526,112 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
+ reset: reset-controller@1004 {
+ compatible = "amlogic,meson-g12a-reset",
+ "amlogic,meson-axg-reset";
+ reg = <0x0 0x1004 0x0 0x9c>;
+ #reset-cells = <1>;
+ };
+
clk_msr: clock-measure@18000 {
compatible = "amlogic,meson-g12a-clk-measure";
reg = <0x0 0x18000 0x0 0x10>;
};
+
+ uart_C: serial@22000 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x22000 0x0 0x18>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+
+ uart_B: serial@23000 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x23000 0x0 0x18>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+
+ uart_A: serial@24000 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x24000 0x0 0x18>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+ };
+
+ usb: usb@ffe09000 {
+ status = "disabled";
+ compatible = "amlogic,meson-g12a-usb-ctrl";
+ reg = <0x0 0xffe09000 0x0 0xa0>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&clkc CLKID_USB>;
+ resets = <&reset RESET_USB>;
+
+ dr_mode = "otg";
+
+ phys = <&usb2_phy0>, <&usb2_phy1>,
+ <&usb3_pcie_phy PHY_TYPE_USB3>;
+ phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
+
+ dwc2: usb@ff400000 {
+ compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+ reg = <0x0 0xff400000 0x0 0x40000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+ clock-names = "ddr";
+ phys = <&usb2_phy1>;
+ dr_mode = "peripheral";
+ g-rx-fifo-size = <192>;
+ g-np-tx-fifo-size = <128>;
+ g-tx-fifo-size = <128 128 16 16 16>;
+ };
+
+ dwc3: usb@ff500000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff500000 0x0 0x100000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_u2_susphy_quirk;
+ snps,quirk-frame-length-adjustment;
+ };
+ };
+
+ mali: gpu@ffe40000 {
+ compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+ reg = <0x0 0xffe40000 0x0 0x40000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpu", "mmu", "job";
+ clocks = <&clkc CLKID_MALI>;
+ resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <800000000>,
+ <0>; /* Do Nothing */
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
index 9a8a8a7e4b53..b5667f1fb2c8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -14,6 +14,16 @@
cvbs-connector {
status = "disabled";
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "n1:white:status";
+ gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
};
&cvbs_vdac_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 8acfd40090d2..25f3b6b14043 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -178,3 +178,7 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index ed3a3d5adf31..7a85a82bf65d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -91,6 +91,33 @@
reset-names = "phy";
status = "okay";
};
+
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson-gxm-mali", "arm,mali-t820";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpu", "mmu", "job";
+ clocks = <&clkc CLKID_MALI>;
+ resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>; /* Do Nothing */
+ };
};
&clkc_AO {
diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
index 6a3255597138..3e8c70778e24 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -8,6 +8,28 @@
#include "bm1880.dtsi"
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "sophon-edge-schematics"
+ * version, 1.0210.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
/ {
compatible = "bitmain,sophon-edge", "bitmain,bm1880";
model = "Sophon Edge";
@@ -32,19 +54,140 @@
clock-frequency = <500000000>;
#clock-cells = <0>;
};
+
+ soc {
+ gpio0: gpio@50027000 {
+ porta: gpio-controller@0 {
+ gpio-line-names =
+ "GPIO-A", /* GPIO0, LSEC pin 23 */
+ "GPIO-C", /* GPIO1, LSEC pin 25 */
+ "[GPIO2_PHY0_RST]", /* GPIO2 */
+ "GPIO-E", /* GPIO3, LSEC pin 27 */
+ "[USB_DET]", /* GPIO4 */
+ "[EN_P5V]", /* GPIO5 */
+ "[VDDIO_MS1_SEL]", /* GPIO6 */
+ "GPIO-G", /* GPIO7, LSEC pin 29 */
+ "[BM_TUSB_RST_L]", /* GPIO8 */
+ "[EN_P5V_USBHUB]", /* GPIO9 */
+ "NC",
+ "LED_WIFI", /* GPIO11 */
+ "LED_BT", /* GPIO12 */
+ "[BM_BLM8221_EN_L]", /* GPIO13 */
+ "NC", /* GPIO14 */
+ "NC", /* GPIO15 */
+ "NC", /* GPIO16 */
+ "NC", /* GPIO17 */
+ "NC", /* GPIO18 */
+ "NC", /* GPIO19 */
+ "NC", /* GPIO20 */
+ "NC", /* GPIO21 */
+ "NC", /* GPIO22 */
+ "NC", /* GPIO23 */
+ "NC", /* GPIO24 */
+ "NC", /* GPIO25 */
+ "NC", /* GPIO26 */
+ "NC", /* GPIO27 */
+ "NC", /* GPIO28 */
+ "NC", /* GPIO29 */
+ "NC", /* GPIO30 */
+ "NC"; /* GPIO31 */
+ };
+ };
+
+ gpio1: gpio@50027400 {
+ portb: gpio-controller@0 {
+ gpio-line-names =
+ "NC", /* GPIO32 */
+ "NC", /* GPIO33 */
+ "[I2C0_SDA]", /* GPIO34, LSEC pin 17 */
+ "[I2C0_SCL]", /* GPIO35, LSEC pin 15 */
+ "[JTAG0_TDO]", /* GPIO36 */
+ "[JTAG0_TCK]", /* GPIO37 */
+ "[JTAG0_TDI]", /* GPIO38 */
+ "[JTAG0_TMS]", /* GPIO39 */
+ "[JTAG0_TRST_X]", /* GPIO40 */
+ "[JTAG1_TDO]", /* GPIO41 */
+ "[JTAG1_TCK]", /* GPIO42 */
+ "[JTAG1_TDI]", /* GPIO43 */
+ "[CPU_TX]", /* GPIO44 */
+ "[CPU_RX]", /* GPIO45 */
+ "[UART1_TXD]", /* GPIO46 */
+ "[UART1_RXD]", /* GPIO47 */
+ "[UART0_TXD]", /* GPIO48 */
+ "[UART0_RXD]", /* GPIO49 */
+ "GPIO-I", /* GPIO50, LSEC pin 31 */
+ "GPIO-K", /* GPIO51, LSEC pin 33 */
+ "USER_LED2", /* GPIO52 */
+ "USER_LED1", /* GPIO53 */
+ "[UART0_RTS]", /* GPIO54 */
+ "[UART0_CTS]", /* GPIO55 */
+ "USER_LED4", /* GPIO56, JTAG1_TRST_X */
+ "USER_LED3", /* GPIO57, JTAG1_TMS */
+ "[I2S0_SCLK]", /* GPIO58 */
+ "[I2S0_FS]", /* GPIO59 */
+ "[I2S0_SDI]", /* GPIO60 */
+ "[I2S0_SDO]", /* GPIO61 */
+ "GPIO-B", /* GPIO62, LSEC pin 24 */
+ "GPIO-F"; /* GPIO63, I2S1_SCLK, LSEC pin 28 */
+ };
+ };
+
+ gpio2: gpio@50027800 {
+ portc: gpio-controller@0 {
+ gpio-line-names =
+ "GPIO-D", /* GPIO64, I2S1_FS, LSEC pin 26 */
+ "GPIO-J", /* GPIO65, I2S1_SDI, LSEC pin 32 */
+ "GPIO-H", /* GPIO66, I2S1_SDO, LSEC pin 30 */
+ "GPIO-L", /* GPIO67, LSEC pin 34 */
+ "[SPI0_CS]", /* GPIO68, SPI1_CS, LSEC pin 12 */
+ "[SPI0_DIN]", /* GPIO69, SPI1_SDI, LSEC pin 10 */
+ "[SPI0_DOUT]", /* GPIO70, SPI1_SDO, LSEC pin 14 */
+ "[SPI0_SCLK]"; /* GPIO71, SPI1_SCK, LSEC pin 8 */
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl_uart0_default: pinctrl-uart0-default {
+ pinmux {
+ groups = "uart0_grp";
+ function = "uart0";
+ };
+ };
+
+ pinctrl_uart1_default: pinctrl-uart1-default {
+ pinmux {
+ groups = "uart1_grp";
+ function = "uart1";
+ };
+ };
+
+ pinctrl_uart2_default: pinctrl-uart2-default {
+ pinmux {
+ groups = "uart2_grp";
+ function = "uart2";
+ };
+ };
};
&uart0 {
status = "okay";
clocks = <&uart_clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
};
&uart1 {
status = "okay";
clocks = <&uart_clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
};
&uart2 {
status = "okay";
clocks = <&uart_clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_default>;
};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 55a4769e0de2..7726fd4c6be6 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -80,6 +80,74 @@
#interrupt-cells = <3>;
};
+ sctrl: system-controller@50010000 {
+ compatible = "bitmain,bm1880-sctrl", "syscon",
+ "simple-mfd";
+ reg = <0x0 0x50010000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x50010000 0x1000>;
+
+ pinctrl: pinctrl@50 {
+ compatible = "bitmain,bm1880-pinctrl";
+ reg = <0x50 0x4B0>;
+ };
+ };
+
+ gpio0: gpio@50027000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0x50027000 0x0 0x400>;
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@50027400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0x50027400 0x0 0x400>;
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio2: gpio@50027800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0x50027800 0x0 0x400>;
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
uart0: serial@58018000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x58018000 0x0 0x2000>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index d88e2f0e179a..d2de16645e10 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -289,6 +289,12 @@
assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
};
+&cmu_mif {
+ assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
+ assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
+ assigned-clock-rates = <0>, <333000000>;
+};
+
&cmu_mscl {
assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
<&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 3d7e0a782243..dda5d2746a74 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -33,7 +33,8 @@
<&cmu_disp CLK_MOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
- <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>,
+ <&cmu_disp CLK_MOUT_SCLK_DSD_USER>;
assigned-clock-parents = <0>, <0>,
<&cmu_mif CLK_ACLK_DISP_333>,
<&cmu_mif CLK_SCLK_DSIM0_DISP>,
@@ -45,7 +46,8 @@
<&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
- <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+ <&cmu_mif CLK_SCLK_DSD_DISP>;
assigned-clock-rates = <250000000>, <400000000>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index a04e80327b6e..d29d13f4694f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -23,6 +23,31 @@
interrupt-parent = <&gic>;
+ arm_a53_pmu {
+ compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ arm_a57_pmu {
+ compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+ };
+
+ xxti: clock {
+ /* XXTI */
+ compatible = "fixed-clock";
+ clock-output-names = "oscclk";
+ #clock-cells = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -237,35 +262,11 @@
#size-cells = <1>;
ranges;
- arm_a53_pmu {
- compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- arm_a57_pmu {
- compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
- };
-
chipid@10000000 {
compatible = "samsung,exynos4210-chipid";
reg = <0x10000000 0x100>;
};
- xxti: xxti {
- compatible = "fixed-clock";
- clock-output-names = "oscclk";
- #clock-cells = <0>;
- };
-
cmu_top: clock-controller@10030000 {
compatible = "samsung,exynos5433-cmu-top";
reg = <0x10030000 0x1000>;
@@ -559,6 +560,15 @@
<&cmu_top CLK_DIV_ACLK_IMEM_200>;
};
+ slim_sss: slim-sss@11140000 {
+ compatible = "samsung,exynos5433-slim-sss";
+ reg = <0x11140000 0x1000>;
+ interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "aclk", "pclk";
+ clocks = <&cmu_imem CLK_ACLK_SLIMSSS>,
+ <&cmu_imem CLK_PCLK_SLIMSSS>;
+ };
+
pd_gscl: power-domain@105c4000 {
compatible = "samsung,exynos5433-pd";
reg = <0x105c4000 0x20>;
@@ -848,12 +858,13 @@
<&cmu_disp CLK_ACLK_XIU_DECON1X>,
<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
<&cmu_disp CLK_SCLK_DECON_VCLK>,
- <&cmu_disp CLK_SCLK_DECON_ECLK>;
+ <&cmu_disp CLK_SCLK_DECON_ECLK>,
+ <&cmu_disp CLK_SCLK_DSD>;
clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
"aclk_xiu_decon0x", "pclk_smmu_decon0x",
"aclk_smmu_decon1x", "aclk_xiu_decon1x",
"pclk_smmu_decon1x", "sclk_decon_vclk",
- "sclk_decon_eclk";
+ "sclk_decon_eclk", "dsd";
power-domains = <&pd_disp>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
@@ -890,12 +901,13 @@
<&cmu_disp CLK_ACLK_XIU_TV1X>,
<&cmu_disp CLK_PCLK_SMMU_TV1X>,
<&cmu_disp CLK_SCLK_DECON_TV_VCLK>,
- <&cmu_disp CLK_SCLK_DECON_TV_ECLK>;
+ <&cmu_disp CLK_SCLK_DECON_TV_ECLK>,
+ <&cmu_disp CLK_SCLK_DSD>;
clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
"aclk_xiu_decon0x", "pclk_smmu_decon0x",
"aclk_smmu_decon1x", "aclk_xiu_decon1x",
"pclk_smmu_decon1x", "sclk_decon_vclk",
- "sclk_decon_eclk";
+ "sclk_decon_eclk", "dsd";
samsung,disp-sysreg = <&syscon_disp>;
power-domains = <&pd_disp>;
interrupt-names = "fifo", "vsync", "lcd_sys";
@@ -1022,11 +1034,12 @@
reg = <0x13c00000 0x1000>;
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "pclk", "aclk", "aclk_xiu",
- "aclk_gsclbend";
+ "aclk_gsclbend", "gsd";
clocks = <&cmu_gscl CLK_PCLK_GSCL0>,
<&cmu_gscl CLK_ACLK_GSCL0>,
<&cmu_gscl CLK_ACLK_XIU_GSCLX>,
- <&cmu_gscl CLK_ACLK_GSCLBEND_333>;
+ <&cmu_gscl CLK_ACLK_GSCLBEND_333>,
+ <&cmu_gscl CLK_ACLK_GSD>;
iommus = <&sysmmu_gscl0>;
power-domains = <&pd_gscl>;
};
@@ -1036,11 +1049,12 @@
reg = <0x13c10000 0x1000>;
interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "pclk", "aclk", "aclk_xiu",
- "aclk_gsclbend";
+ "aclk_gsclbend", "gsd";
clocks = <&cmu_gscl CLK_PCLK_GSCL1>,
<&cmu_gscl CLK_ACLK_GSCL1>,
<&cmu_gscl CLK_ACLK_XIU_GSCLX>,
- <&cmu_gscl CLK_ACLK_GSCLBEND_333>;
+ <&cmu_gscl CLK_ACLK_GSCLBEND_333>,
+ <&cmu_gscl CLK_ACLK_GSD>;
iommus = <&sysmmu_gscl1>;
power-domains = <&pd_gscl>;
};
@@ -1050,11 +1064,12 @@
reg = <0x13c20000 0x1000>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "pclk", "aclk", "aclk_xiu",
- "aclk_gsclbend";
+ "aclk_gsclbend", "gsd";
clocks = <&cmu_gscl CLK_PCLK_GSCL2>,
<&cmu_gscl CLK_ACLK_GSCL2>,
<&cmu_gscl CLK_ACLK_XIU_GSCLX>,
- <&cmu_gscl CLK_ACLK_GSCLBEND_333>;
+ <&cmu_gscl CLK_ACLK_GSCLBEND_333>,
+ <&cmu_gscl CLK_ACLK_GSD>;
iommus = <&sysmmu_gscl2>;
power-domains = <&pd_gscl>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 967558a93d82..077d23478901 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -28,6 +28,23 @@
tmuctrl0 = &tmuctrl_0;
};
+ arm-pmu {
+ compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>,
+ <&cpu_atlas2>, <&cpu_atlas3>;
+ };
+
+ fin_pll: clock {
+ /* XXTI */
+ compatible = "fixed-clock";
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -77,12 +94,6 @@
reg = <0x10000000 0x100>;
};
- fin_pll: xxti {
- compatible = "fixed-clock";
- clock-output-names = "fin_pll";
- #clock-cells = <0>;
- };
-
gic: interrupt-controller@11001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -469,28 +480,6 @@
status = "disabled";
};
- arm-pmu {
- compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>,
- <&cpu_atlas2>, <&cpu_atlas3>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
pmu_system_controller: system-controller@105c0000 {
compatible = "samsung,exynos7-pmu", "syscon";
reg = <0x105c0000 0x5000>;
@@ -635,6 +624,18 @@
};
};
};
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
};
#include "exynos7-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 13604e558dc1..0bd122f60549 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -20,5 +20,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
index 7c726267ec8f..9927b096d343 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
@@ -87,6 +87,10 @@
status = "okay";
};
+&pcie {
+ status = "okay";
+};
+
&sai2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 1ce0042b2a14..ec6257a5b251 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -475,7 +475,7 @@
interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
};
- pcie@3400000 {
+ pcie: pcie@3400000 {
compatible = "fsl,ls1012a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 14c79f4691ea..b359068d9605 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -32,6 +32,49 @@
device_type = "memory";
reg = <0x0 0x80000000 0x1 0x00000000>;
};
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ frame-master;
+ bitclock-master;
+ system-clock-frequency = <25000000>;
+ };
+ };
};
&duart0 {
@@ -89,5 +132,24 @@
reg = <0x57>;
};
};
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ sgtl5000: audio-codec@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ VDDA-supply = <&reg_1p8v>;
+ VDDIO-supply = <&reg_1p8v>;
+ clocks = <&sys_mclk>;
+ };
+ };
};
};
+
+&sai1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f86b054a74ae..f9c272fb0738 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -28,6 +28,49 @@
device_type = "memory";
reg = <0x0 0x80000000 0x1 0x0000000>;
};
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai4>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ frame-master;
+ bitclock-master;
+ system-clock-frequency = <25000000>;
+ };
+ };
};
&i2c0 {
@@ -39,6 +82,22 @@
#address-cells = <1>;
#size-cells = <0>;
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+
+ sgtl5000: audio-codec@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ VDDA-supply = <&reg_1p8v>;
+ VDDIO-supply = <&reg_1p8v>;
+ clocks = <&sys_mclk>;
+ sclk-strength = <3>;
+ };
+ };
+
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
@@ -88,3 +147,7 @@
&enetc_port1 {
status = "disabled";
};
+
+&sai4 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 2896bbcfa3bb..b04581249f0b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -89,6 +89,11 @@
IRQ_TYPE_LEVEL_LOW)>;
};
+ pmu {
+ compatible = "arm,cortex-a72-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
gic: interrupt-controller@6000000 {
compatible= "arm,gic-v3";
#address-cells = <2>;
@@ -235,6 +240,21 @@
status = "disabled";
};
+ edma0: dma-controller@22c0000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x0 0x22c0000 0x0 0x10000>,
+ <0x0 0x22d0000 0x0 0x10000>,
+ <0x0 0x22e0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clockgen 4 1>,
+ <&clockgen 4 1>;
+ };
+
gpio1: gpio@2300000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
@@ -277,7 +297,7 @@
sata: sata@3200000 {
compatible = "fsl,ls1028a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
- <0x0 0x20140520 0x0 0x4>;
+ <0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
@@ -336,6 +356,48 @@
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
};
+ sai1: audio-controller@f100000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 4>,
+ <&edma0 1 3>;
+ status = "disabled";
+ };
+
+ sai2: audio-controller@f110000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 6>,
+ <&edma0 1 5>;
+ status = "disabled";
+ };
+
+ sai4: audio-controller@f130000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf130000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 10>,
+ <&edma0 1 9>;
+ status = "disabled";
+ };
+
pcie@1f0000000 { /* Integrated Endpoint Root Complex */
compatible = "pci-host-ecam-generic";
reg = <0x01 0xf0000000 0x0 0x100000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 17ca357e854f..4223a2352d45 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -15,7 +15,6 @@
model = "LS1043A RDB Board";
aliases {
- crypto = &crypto;
serial0 = &duart0;
serial1 = &duart1;
serial2 = &duart2;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 6fd6116509cc..71d9ed9ff985 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -18,6 +18,7 @@
#size-cells = <2>;
aliases {
+ crypto = &crypto;
fman0 = &fman0;
ethernet0 = &enet0;
ethernet1 = &enet1;
@@ -296,7 +297,6 @@
interrupts = <0 99 0x4>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 0>, <&clockgen 4 0>;
- big-endian;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index cb7185014d3a..b0ef08b090dd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -215,8 +215,6 @@
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
- big-endian;
- fsl,qspi-has-second-chip;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 99a22abbe725..1a5acf62f23c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -95,6 +95,22 @@
};
};
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sata3 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 9df37b159415..c2817b784232 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -128,6 +128,22 @@
};
};
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sata3 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index fe87204850b5..125a8cc2c5b3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -33,6 +33,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster0_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@1 {
@@ -48,6 +49,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster0_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@100 {
@@ -63,6 +65,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster1_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@101 {
@@ -78,6 +81,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster1_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@200 {
@@ -93,6 +97,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster2_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@201 {
@@ -108,6 +113,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster2_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@300 {
@@ -123,6 +129,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster3_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@301 {
@@ -138,6 +145,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster3_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@400 {
@@ -153,6 +161,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster4_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@401 {
@@ -168,6 +177,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster4_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@500 {
@@ -183,6 +193,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster5_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@501 {
@@ -198,6 +209,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster5_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@600 {
@@ -213,6 +225,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster6_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@601 {
@@ -228,6 +241,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster6_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@700 {
@@ -243,6 +257,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster7_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cpu@701 {
@@ -258,6 +273,7 @@
i-cache-line-size = <64>;
i-cache-sets = <192>;
next-level-cache = <&cluster7_l2>;
+ cpu-idle-states = <&cpu_pw20>;
};
cluster0_l2: l2-cache0 {
@@ -323,6 +339,15 @@
cache-sets = <1024>;
cache-level = <2>;
};
+
+ cpu_pw20: cpu-pw20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PW20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <2000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <6000>;
+ };
};
gic: interrupt-controller@6000000 {
@@ -687,6 +712,50 @@
status = "disabled";
};
+ sata0: sata@3200000 {
+ compatible = "fsl,lx2160a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ sata1: sata@3210000 {
+ compatible = "fsl,lx2160a-ahci";
+ reg = <0x0 0x3210000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ sata2: sata@3220000 {
+ compatible = "fsl,lx2160a-ahci";
+ reg = <0x0 0x3220000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ sata3: sata@3230000 {
+ compatible = "fsl,lx2160a-ahci";
+ reg = <0x0 0x3230000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ status = "disabled";
+ };
+
smmu: iommu@5000000 {
compatible = "arm,mmu-500";
reg = <0 0x5000000 0 0x800000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
new file mode 100644
index 000000000000..2d5d89475b76
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+
+/ {
+ model = "FSL i.MX8MM EVK board";
+ compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led>;
+
+ status {
+ label = "status";
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ at803x,led-act-blind-workaround;
+ at803x,eee-okay;
+ at803x,vddio-1p8v;
+ };
+ };
+};
+
+&uart2 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
+ >;
+ };
+
+ pinctrl_gpio_led: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
new file mode 100644
index 000000000000..6b407a94c06e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mm-pinfunc.h"
+
+/ {
+ compatible = "fsl,imx8mm";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &fec1;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ A53_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MM_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ };
+
+ A53_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MM_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ };
+
+ A53_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MM_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ };
+
+ A53_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MM_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ };
+
+ A53_L2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ a53_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <850000>;
+ clock-latency-ns = <150000>;
+ };
+
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ osc_32k: clock-osc-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc_32k";
+ };
+
+ osc_24m: clock-osc-24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc_24m";
+ };
+
+ clk_ext1: clock-ext1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext1";
+ };
+
+ clk_ext2: clock-ext2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext2";
+ };
+
+ clk_ext3: clock-ext3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext3";
+ };
+
+ clk_ext4: clock-ext4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency= <133000000>;
+ clock-output-names = "clk_ext4";
+ };
+
+ gic: interrupt-controller@38800000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
+ <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+ clock-frequency = <8000000>;
+ arm,no-tick-in-suspend;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x3e000000>;
+
+ aips1: bus@30000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio1: gpio@30200000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30200000 0x10000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@30210000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30210000 0x10000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@30220000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30220000 0x10000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@30230000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30230000 0x10000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@30240000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30240000 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wdog1: watchdog@30280000 {
+ compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+ reg = <0x30280000 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
+ status = "disabled";
+ };
+
+ wdog2: watchdog@30290000 {
+ compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+ reg = <0x30290000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
+ status = "disabled";
+ };
+
+ wdog3: watchdog@302a0000 {
+ compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+ reg = <0x302a0000 0x10000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
+ status = "disabled";
+ };
+
+ sdma2: dma-controller@302c0000 {
+ compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ reg = <0x302c0000 0x10000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
+ <&clk IMX8MM_CLK_SDMA2_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
+ sdma3: dma-controller@302b0000 {
+ compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ reg = <0x302b0000 0x10000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
+ <&clk IMX8MM_CLK_SDMA3_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
+ iomuxc: pinctrl@30330000 {
+ compatible = "fsl,imx8mm-iomuxc";
+ reg = <0x30330000 0x10000>;
+ };
+
+ gpr: iomuxc-gpr@30340000 {
+ compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
+ reg = <0x30340000 0x10000>;
+ };
+
+ ocotp: ocotp-ctrl@30350000 {
+ compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon";
+ reg = <0x30350000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
+ /* For nvmem subnodes */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ anatop: anatop@30360000 {
+ compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus";
+ reg = <0x30360000 0x10000>;
+ };
+
+ snvs: snvs@30370000 {
+ compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+ reg = <0x30370000 0x10000>;
+
+ snvs_rtc: snvs-rtc-lp {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap = <&snvs>;
+ offset = <0x34>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ clk: clock-controller@30380000 {
+ compatible = "fsl,imx8mm-ccm";
+ reg = <0x30380000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+ <&clk_ext3>, <&clk_ext4>;
+ clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+ "clk_ext3", "clk_ext4";
+ };
+
+ src: reset-controller@30390000 {
+ compatible = "fsl,imx8mm-src", "syscon";
+ reg = <0x30390000 0x10000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+ };
+
+ aips2: bus@30400000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pwm1: pwm@30660000 {
+ compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+ reg = <0x30660000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
+ <&clk IMX8MM_CLK_PWM1_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@30670000 {
+ compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+ reg = <0x30670000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
+ <&clk IMX8MM_CLK_PWM2_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@30680000 {
+ compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+ reg = <0x30680000 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
+ <&clk IMX8MM_CLK_PWM3_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@30690000 {
+ compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+ reg = <0x30690000 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
+ <&clk IMX8MM_CLK_PWM4_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ aips3: bus@30800000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ecspi1: spi@30820000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ecspi2: spi@30830000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ecspi3: spi@30840000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart1: serial@30860000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+ <&clk IMX8MM_CLK_UART1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial@30880000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+ <&clk IMX8MM_CLK_UART3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@30890000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+ <&clk IMX8MM_CLK_UART2_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c1: i2c@30a20000 {
+ compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30a20000 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@30a30000 {
+ compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30a30000 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@30a40000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+ reg = <0x30a40000 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@30a50000 {
+ compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30a50000 0x10000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
+ status = "disabled";
+ };
+
+ uart4: serial@30a60000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30a60000 0x10000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
+ <&clk IMX8MM_CLK_UART4_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usdhc1: mmc@30b40000 {
+ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+ reg = <0x30b40000 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+ <&clk IMX8MM_CLK_USDHC1_ROOT>;
+ clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
+ assigned-clock-rates = <400000000>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: mmc@30b50000 {
+ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+ reg = <0x30b50000 0x10000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+ <&clk IMX8MM_CLK_USDHC2_ROOT>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: mmc@30b60000 {
+ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+ reg = <0x30b60000 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+ <&clk IMX8MM_CLK_USDHC3_ROOT>;
+ clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ sdma1: dma-controller@30bd0000 {
+ compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ reg = <0x30bd0000 0x10000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
+ <&clk IMX8MM_CLK_SDMA1_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
+ fec1: ethernet@30be0000 {
+ compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec";
+ reg = <0x30be0000 0x10000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
+ <&clk IMX8MM_CLK_ENET1_ROOT>,
+ <&clk IMX8MM_CLK_ENET_TIMER>,
+ <&clk IMX8MM_CLK_ENET_REF>,
+ <&clk IMX8MM_CLK_ENET_PHY_REF>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
+ <&clk IMX8MM_CLK_ENET_TIMER>,
+ <&clk IMX8MM_CLK_ENET_REF>,
+ <&clk IMX8MM_CLK_ENET_TIMER>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+ <&clk IMX8MM_SYS_PLL2_100M>,
+ <&clk IMX8MM_SYS_PLL2_125M>;
+ assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
+ status = "disabled";
+ };
+
+ };
+
+ aips4: bus@32c00000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbotg1: usb@32e40000 {
+ compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+ reg = <0x32e40000 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+ clock-names = "usb1_ctrl_root_clk";
+ assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
+ <&clk IMX8MM_CLK_USB_CORE_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
+ <&clk IMX8MM_SYS_PLL1_100M>;
+ fsl,usbphy = <&usbphynop1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ status = "disabled";
+ };
+
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+ clock-names = "main_clk";
+ };
+
+ usbmisc1: usbmisc@32e40200 {
+ compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+ #index-cells = <1>;
+ reg = <0x32e40200 0x200>;
+ };
+
+ usbotg2: usb@32e50000 {
+ compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+ reg = <0x32e50000 0x200>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+ clock-names = "usb1_ctrl_root_clk";
+ assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
+ <&clk IMX8MM_CLK_USB_CORE_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
+ <&clk IMX8MM_SYS_PLL1_100M>;
+ fsl,usbphy = <&usbphynop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ status = "disabled";
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+ clock-names = "main_clk";
+ };
+
+ usbmisc2: usbmisc@32e50200 {
+ compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+ #index-cells = <1>;
+ reg = <0x32e50200 0x200>;
+ };
+
+ };
+
+ dma_apbh: dma-controller@33000000 {
+ compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x33000000 0x2000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+ };
+
+ gpmi: nand-controller@33002000{
+ compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bch";
+ clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
+ <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+ clock-names = "gpmi_io", "gpmi_bch_apb";
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 54737bf1772f..b2038be8bbd7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -21,6 +21,12 @@
reg = <0x00000000 0x40000000 0 0xc0000000>;
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
reg_usdhc2_vmmc: regulator-vsd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2>;
@@ -31,6 +37,63 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ buck2_reg: regulator-buck2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_buck2>;
+ compatible = "regulator-gpio";
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1000000>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ states = <1000000 0x0
+ 900000 0x1>;
+ };
+
+ wm8524: audio-codec {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8524";
+ wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ sound-wm8524 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "wm8524-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,widgets =
+ "Line", "Left Line Out Jack",
+ "Line", "Right Line Out Jack";
+ simple-audio-card,routing =
+ "Left Line Out Jack", "LINEVOUTL",
+ "Right Line Out Jack", "LINEVOUTR";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ link_codec: simple-audio-card,codec {
+ sound-dai = <&wm8524>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ };
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
};
&fec1 {
@@ -52,6 +115,26 @@
};
};
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_reset>;
+
+ wl-reg-on {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -143,6 +226,22 @@
};
};
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE1_AUX>,
+ <&clk IMX8MQ_CLK_PCIE1_PHY>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ status = "okay";
+};
+
+&pgc_gpu {
+ power-supply = <&sw1a_reg>;
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -203,6 +302,13 @@
};
&iomuxc {
+ pinctrl_buck2: vddarmgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19
+ >;
+
+ };
+
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
@@ -230,6 +336,13 @@
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76
+ MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28 0x16
+ >;
+ };
+
pinctrl_qspi: qspigrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
@@ -248,6 +361,16 @@
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
@@ -347,4 +470,10 @@
MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
>;
};
+
+ pinctrl_wifi_reset: wifiresetgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16
+ >;
+ };
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
new file mode 100644
index 000000000000..d2a6da479980
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx8mq-zii-ultra.dtsi"
+
+/ {
+ model = "ZII i.MX8MQ Ultra RMB3 Board";
+ compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nor_flash: flash@0 {
+ compatible = "st,n25q128a13", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c2 {
+ temp-sense@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+};
+
+&i2c4 {
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <2>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ syna,sensor-type = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ syna,sensor-type = <1>;
+ };
+ };
+
+ touchscreen@2a {
+ compatible = "eeti,exc3000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ reg = <0x2a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ status = "disabled";
+ };
+};
+
+&usbhub {
+ swap-dx-lanes = <0>;
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19
+ MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
+ MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
+ MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
new file mode 100644
index 000000000000..1084d9330403
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx8mq-zii-ultra.dtsi"
+
+/ {
+ model = "ZII i.MX8MQ Ultra Zest Board";
+ compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq";
+};
+
+&i2c4 {
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ reg = <0x4a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
new file mode 100644
index 000000000000..7a1706f969f0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -0,0 +1,725 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+ aliases {
+ mdio-gpio0 = &mdio0;
+ rtc0 = &ds1341;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ mdio0: bitbang-mdio {
+ compatible = "virtual,mdio-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio1 14 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ pcie0_refclk: clock-pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ pcie1_refclk: clock-pcie1-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ reg_12p0_main: regulator-12p0-main {
+ compatible = "regulator-fixed";
+ regulator-name = "12V_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_5p0_main: regulator-5p0-main {
+ compatible = "regulator-fixed";
+ vin-supply = <&reg_12p0_main>;
+ regulator-name = "5V_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_3p3_main: regulator-3p3-main {
+ compatible = "regulator-fixed";
+ vin-supply = <&reg_12p0_main>;
+ regulator-name = "3V3V_MAIN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0_user_usb: regulator-5p0-user-usb {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_user_usb>;
+ vin-supply = <&reg_5p0_main>;
+ regulator-name = "5V_USER_USB";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <1000>;
+ };
+
+ reg_usdhc2_vmmc: regulator-vsd-3v3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2>;
+ compatible = "regulator-fixed";
+ vin-supply = <&reg_3p3_main>;
+ regulator-name = "3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_arm: regulator-arm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_arm>;
+ compatible = "regulator-gpio";
+ vin-supply = <&reg_12p0_main>;
+ regulator-name = "0V9_ARM";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1000000>;
+ gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ states = <1000000 0x0
+ 900000 0x1>;
+ regulator-always-on;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <&reg_arm>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+
+ phy-handle = <&phy0>;
+ phy-mode = "rmii";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ switch: switch@0 {
+ compatible = "marvell,mv88e6085";
+ pinctrl-0 = <&pinctrl_switch_irq>;
+ pinctrl-names = "default";
+ reg = <0>;
+ dsa,member = <0 0>;
+ eeprom-length = <512>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "gigabit_proc";
+ phy-handle = <&switchphy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "netaux";
+ phy-handle = <&switchphy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "cpu";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "netright";
+ phy-handle = <&switchphy3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "netleft";
+ phy-handle = <&switchphy4>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switchphy0: switchphy@0 {
+ reg = <0>;
+ interrupt-parent = <&switch>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switchphy1: switchphy@1 {
+ reg = <1>;
+ interrupt-parent = <&switch>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switchphy2: switchphy@2 {
+ reg = <2>;
+ interrupt-parent = <&switch>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switchphy3: switchphy@3 {
+ reg = <3>;
+ interrupt-parent = <&switch>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switchphy4: switchphy@4 {
+ reg = <4>;
+ interrupt-parent = <&switch>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+};
+
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+ usb-emulation {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "usb-emulation";
+ };
+
+ usb-mode1 {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-mode1";
+ };
+
+ usb-mode2 {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-mode2";
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x8>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3ab {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <975000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1675000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1625000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3625000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+
+ ds1341: rtc@68 {
+ compatible = "dallas,ds1341";
+ reg = <0x68>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ usbhub: usbhub@2c {
+ compatible ="microchip,usb2513b";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbhub>;
+ reg = <0x2c>;
+ reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+
+ rave-sp {
+ compatible = "zii,rave-sp-rdu2";
+ current-speed = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ watchdog {
+ compatible = "zii,rave-sp-watchdog";
+ };
+
+ backlight {
+ compatible = "zii,rave-sp-backlight";
+ };
+
+ pwrbutton {
+ compatible = "zii,rave-sp-pwrbutton";
+ };
+
+ eeprom@a3 {
+ compatible = "zii,rave-sp-eeprom";
+ reg = <0xa3 0x4000>;
+ zii,eeprom-name = "dds-eeprom";
+ };
+
+ eeprom@a4 {
+ compatible = "zii,rave-sp-eeprom";
+ reg = <0xa4 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ zii,eeprom-name = "main-eeprom";
+ };
+ };
+};
+
+&usb3_phy0 {
+ vbus-supply = <&reg_5p0_user_usb>;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <&reg_5p0_main>;
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE1_AUX>,
+ <&clk IMX8MQ_CLK_PCIE1_PHY>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ status = "okay";
+};
+
+&pcie1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie1>;
+ reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE2_AUX>,
+ <&clk IMX8MQ_CLK_PCIE2_PHY>,
+ <&pcie1_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ status = "okay";
+};
+
+&pgc_gpu {
+ power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+ power-supply = <&sw1c_reg>;
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vqmmc-supply = <&sw4_reg>;
+ bus-width = <8>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&snvs_rtc {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
+ MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x1f
+ MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER 0x91
+ MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ >;
+ };
+
+ pinctrl_fec1_phy_reset: fec1phyresetgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x11
+ >;
+ };
+
+ pinctrl_gpio3_hog: gpio3hoggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x6
+ MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x6
+ MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13 0x6
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_mdio_bitbang: bitbangmdiogrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x44
+ MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x64
+ >;
+ };
+
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B 0x66
+ MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x6
+ >;
+ };
+
+ pinctrl_pcie1: pcie1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B 0x66
+ MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x6
+ >;
+ };
+
+ pinctrl_reg_arm: regarmgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
+ >;
+ };
+
+ pinctrl_reg_usdhc2: regusdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_reg_user_usb: reguserusbgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x6
+ >;
+ };
+
+ pinctrl_switch_irq: switchgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
+ >;
+ };
+
+ pinctrl_ts: tsgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x96
+ MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x96
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_usbhub: usbhubgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x41
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9155bd4784eb..6d635ba0904c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -6,8 +6,10 @@
#include <dt-bindings/clock/imx8mq-clock.h>
#include <dt-bindings/power/imx8mq-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
#include "imx8mq-pinfunc.h"
/ {
@@ -87,32 +89,48 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ #cooling-cells = <2>;
};
A53_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ #cooling-cells = <2>;
};
A53_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ #cooling-cells = <2>;
};
A53_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ #cooling-cells = <2>;
};
A53_L2: l2-cache0 {
@@ -120,6 +138,24 @@
};
};
+ a53_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <150000>;
+ };
+
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -132,6 +168,67 @@
method = "smc";
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu 1>;
+
+ trips {
+ gpu-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ vpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu 2>;
+
+ trips {
+ vpu-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
@@ -160,6 +257,7 @@
reg = <0x30200000 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -171,6 +269,7 @@
reg = <0x30210000 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -182,6 +281,7 @@
reg = <0x30220000 0x10000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -193,6 +293,7 @@
reg = <0x30230000 0x10000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -204,12 +305,65 @@
reg = <0x30240000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
+ tmu: tmu@30260000 {
+ compatible = "fsl,imx8mq-tmu";
+ reg = <0x30260000 0x10000>;
+ interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+ fsl,tmu-calibration = <0x00000000 0x00000023
+ 0x00000001 0x00000029
+ 0x00000002 0x0000002f
+ 0x00000003 0x00000035
+ 0x00000004 0x0000003d
+ 0x00000005 0x00000043
+ 0x00000006 0x0000004b
+ 0x00000007 0x00000051
+ 0x00000008 0x00000057
+ 0x00000009 0x0000005f
+ 0x0000000a 0x00000067
+ 0x0000000b 0x0000006f
+
+ 0x00010000 0x0000001b
+ 0x00010001 0x00000023
+ 0x00010002 0x0000002b
+ 0x00010003 0x00000033
+ 0x00010004 0x0000003b
+ 0x00010005 0x00000043
+ 0x00010006 0x0000004b
+ 0x00010007 0x00000055
+ 0x00010008 0x0000005d
+ 0x00010009 0x00000067
+ 0x0001000a 0x00000070
+
+ 0x00020000 0x00000017
+ 0x00020001 0x00000023
+ 0x00020002 0x0000002d
+ 0x00020003 0x00000037
+ 0x00020004 0x00000041
+ 0x00020005 0x0000004b
+ 0x00020006 0x00000057
+ 0x00020007 0x00000063
+ 0x00020008 0x0000006f
+
+ 0x00030000 0x00000015
+ 0x00030001 0x00000021
+ 0x00030002 0x0000002d
+ 0x00030003 0x00000039
+ 0x00030004 0x00000045
+ 0x00030005 0x00000053
+ 0x00030006 0x0000005f
+ 0x00030007 0x00000071>;
+ #thermal-sensor-cells = <1>;
+ };
+
wdog1: watchdog@30280000 {
compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
@@ -234,16 +388,35 @@
status = "disabled";
};
+ sdma2: sdma@302c0000 {
+ compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+ reg = <0x302c0000 0x10000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+ <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
iomuxc: iomuxc@30330000 {
compatible = "fsl,imx8mq-iomuxc";
reg = <0x30330000 0x10000>;
};
iomuxc_gpr: syscon@30340000 {
- compatible = "fsl,imx8mq-iomuxc-gpr", "syscon";
+ compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x30340000 0x10000>;
};
+ ocotp: ocotp-ctrl@30350000 {
+ compatible = "fsl,imx8mq-ocotp", "syscon";
+ reg = <0x30350000 0x10000>;
+ clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
anatop: syscon@30360000 {
compatible = "fsl,imx8mq-anatop", "syscon";
reg = <0x30360000 0x10000>;
@@ -278,6 +451,12 @@
"clk_ext3", "clk_ext4";
};
+ src: reset-controller@30390000 {
+ compatible = "fsl,imx8mq-src", "syscon";
+ reg = <0x30390000 0x10000>;
+ #reset-cells = <1>;
+ };
+
gpc: gpc@303a0000 {
compatible = "fsl,imx8mq-gpc";
reg = <0x303a0000 0x10000>;
@@ -294,9 +473,25 @@
reg = <IMX8M_POWER_DOMAIN_MIPI>;
};
- pgc_pcie1: power-domain@1 {
+ /*
+ * As per comment in ATF source code:
+ *
+ * PCIE1 and PCIE2 share the
+ * same reset signal, if we
+ * power down PCIE2, PCIE1
+ * will be held in reset too.
+ *
+ * So instead of creating two
+ * separate power domains for
+ * PCIE1 and PCIE2 we create a
+ * link between both and use
+ * it as a shared PCIE power
+ * domain.
+ */
+ pgc_pcie: power-domain@1 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_PCIE1>;
+ power-domains = <&pgc_pcie2>;
};
pgc_otg1: power-domain@2 {
@@ -478,6 +673,21 @@
status = "disabled";
};
+ sai2: sai@308b0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mq-sai",
+ "fsl,imx6sx-sai";
+ reg = <0x308b0000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+ <&clk IMX8MQ_CLK_SAI2_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
reg = <0x30a20000 0x10000>;
@@ -575,6 +785,17 @@
status = "disabled";
};
+ sdma1: sdma@30bd0000 {
+ compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+ reg = <0x30bd0000 0x10000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+ <&clk IMX8MQ_CLK_AHB>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
fec1: ethernet@30be0000 {
compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
@@ -594,6 +815,30 @@
};
};
+ gpu: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x40000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+ <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+ <&clk IMX8MQ_CLK_GPU_AXI>,
+ <&clk IMX8MQ_CLK_GPU_AHB>;
+ clock-names = "core", "shader", "bus", "reg";
+ assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
+ <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
+ <&clk IMX8MQ_CLK_GPU_AXI>,
+ <&clk IMX8MQ_CLK_GPU_AHB>,
+ <&clk IMX8MQ_GPU_PLL_BYPASS>;
+ assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
+ <&clk IMX8MQ_GPU_PLL_OUT>,
+ <&clk IMX8MQ_GPU_PLL_OUT>,
+ <&clk IMX8MQ_GPU_PLL_OUT>,
+ <&clk IMX8MQ_GPU_PLL>;
+ assigned-clock-rates = <800000000>, <800000000>,
+ <800000000>, <800000000>, <0>;
+ power-domains = <&pgc_gpu>;
+ };
+
usb_dwc3_0: usb@38100000 {
compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
reg = <0x38100000 0x10000>;
@@ -658,6 +903,66 @@
status = "disabled";
};
+
+ pcie0: pcie@33800000 {
+ compatible = "fsl,imx8mq-pcie";
+ reg = <0x33800000 0x400000>,
+ <0x1ff00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
+ 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ num-viewport = <4>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,max-link-speed = <2>;
+ power-domains = <&pgc_pcie>;
+ resets = <&src IMX8MQ_RESET_PCIEPHY>,
+ <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+ <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+ reset-names = "pciephy", "apps", "turnoff";
+ status = "disabled";
+ };
+
+ pcie1: pcie@33c00000 {
+ compatible = "fsl,imx8mq-pcie";
+ reg = <0x33c00000 0x400000>,
+ <0x27f00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */
+ 0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ num-viewport = <4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,max-link-speed = <2>;
+ power-domains = <&pgc_pcie>;
+ resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+ <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+ <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+ reset-names = "pciephy", "apps", "turnoff";
+ status = "disabled";
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 03aad66545c5..bfdada2db176 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -60,6 +60,82 @@
};
};
+&adma_i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9646", "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ max7322: gpio@68 {
+ compatible = "maxim,max7322";
+ reg = <0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ pressure-sensor@60 {
+ compatible = "fsl,mpl3115";
+ reg = <0x60>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ pca9557_a: gpio@1a {
+ compatible = "nxp,pca9557";
+ reg = <0x1a>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9557_b: gpio@1d {
+ compatible = "nxp,pca9557";
+ reg = <0x1d>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ light-sensor@44 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isl29023>;
+ compatible = "isil,isl29023";
+ reg = <0x44>;
+ interrupt-parent = <&lsio_gpio1>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+ };
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -100,6 +176,25 @@
>;
};
+ pinctrl_ioexp_rst: ioexp_rst_grp {
+ fsl,pins = <
+ IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021
+ >;
+ };
+
+ pinctrl_isl29023: isl29023grp {
+ fsl,pins = <
+ IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02 0x00000021
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL 0x06000021
+ IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA 0x06000021
+ >;
+ };
+
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 4c3dd95ed488..0683ee2a48ae 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -21,6 +21,7 @@
mmc1 = &usdhc2;
mmc2 = &usdhc3;
serial0 = &adma_lpuart0;
+ mu1 = &lsio_mu1;
};
cpus {
@@ -34,6 +35,9 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
+ clocks = <&clk IMX_A35_CLK>;
+ operating-points-v2 = <&a35_opp_table>;
+ #cooling-cells = <2>;
};
A35_1: cpu@1 {
@@ -42,6 +46,9 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
+ clocks = <&clk IMX_A35_CLK>;
+ operating-points-v2 = <&a35_opp_table>;
+ #cooling-cells = <2>;
};
A35_2: cpu@2 {
@@ -50,6 +57,9 @@
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
+ clocks = <&clk IMX_A35_CLK>;
+ operating-points-v2 = <&a35_opp_table>;
+ #cooling-cells = <2>;
};
A35_3: cpu@3 {
@@ -58,6 +68,9 @@
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
+ clocks = <&clk IMX_A35_CLK>;
+ operating-points-v2 = <&a35_opp_table>;
+ #cooling-cells = <2>;
};
A35_L2: l2-cache0 {
@@ -65,6 +78,24 @@
};
};
+ a35_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <150000>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+ };
+
gic: interrupt-controller@51a00000 {
compatible = "arm,gic-v3";
reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
@@ -87,7 +118,8 @@
scu {
compatible = "fsl,imx-scu";
mbox-names = "tx0", "tx1", "tx2", "tx3",
- "rx0", "rx1", "rx2", "rx3";
+ "rx0", "rx1", "rx2", "rx3",
+ "gip3";
mboxes = <&lsio_mu1 0 0
&lsio_mu1 0 1
&lsio_mu1 0 2
@@ -95,7 +127,8 @@
&lsio_mu1 1 0
&lsio_mu1 1 1
&lsio_mu1 1 2
- &lsio_mu1 1 3>;
+ &lsio_mu1 1 3
+ &lsio_mu1 3 3>;
clk: clock-controller {
compatible = "fsl,imx8qxp-clk";
@@ -163,6 +196,39 @@
status = "disabled";
};
+ adma_lpuart1: serial@5a070000 {
+ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x5a070000 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_UART_1>;
+ status = "disabled";
+ };
+
+ adma_lpuart2: serial@5a080000 {
+ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x5a080000 0x1000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_UART_2>;
+ status = "disabled";
+ };
+
+ adma_lpuart3: serial@5a090000 {
+ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x5a090000 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_UART_3>;
+ status = "disabled";
+ };
+
adma_i2c0: i2c@5a800000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a800000 0x4000>;
@@ -328,7 +394,7 @@
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1b0000 0x10000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <0>;
+ #mbox-cells = <2>;
status = "disabled";
};
@@ -339,11 +405,19 @@
#mbox-cells = <2>;
};
+ lsio_mu2: mailbox@5d1d0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1d0000 0x10000>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
lsio_mu3: mailbox@5d1e0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1e0000 0x10000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <0>;
+ #mbox-cells = <2>;
status = "disabled";
};
@@ -351,7 +425,7 @@
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1f0000 0x10000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <0>;
+ #mbox-cells = <2>;
status = "disabled";
};
@@ -443,4 +517,9 @@
power-domains = <&pd IMX_SC_R_GPIO_7>;
};
};
+
+ watchdog {
+ compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 2f19e0e5b7cf..aa6a8ad31be2 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -478,6 +478,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf00000 0x0 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 2 &dma0 3>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
<&crg_ctrl HI3660_CLK_GATE_UART1>;
clock-names = "uartclk", "apb_pclk";
@@ -490,6 +492,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf03000 0x0 0x1000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 4 &dma0 5>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
@@ -514,6 +518,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf01000 0x0 0x1000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 6 &dma0 7>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
<&crg_ctrl HI3660_CLK_GATE_UART4>;
clock-names = "uartclk", "apb_pclk";
@@ -526,6 +532,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 8 &dma0 9>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
<&crg_ctrl HI3660_CLK_GATE_UART5>;
clock-names = "uartclk", "apb_pclk";
@@ -552,13 +560,23 @@
#dma-cells = <1>;
dma-channels = <16>;
dma-requests = <32>;
- dma-min-chan = <1>;
+ dma-channel-mask = <0xfffe>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>;
dma-no-cci;
dma-type = "hi3660_dma";
};
+ asp_dmac: dma-controller@e804b000 {
+ compatible = "hisilicon,hisi-pcm-asp-dma-1.0";
+ reg = <0x0 0xe804b000 0x0 0x1000>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "asp_dma_irq";
+ };
+
rtc0: rtc@fff04000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x0 0Xfff04000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index c9775b66629f..7dac33d4fd5c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -8,6 +8,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "hi3670.dtsi"
#include "hikey970-pinctrl.dtsi"
@@ -17,6 +18,8 @@
compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
aliases {
+ mshc1 = &dwmmc1;
+ mshc2 = &dwmmc2;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -35,6 +38,37 @@
/* expect bootloader to fill in this region */
reg = <0x0 0x0 0x0 0x0>;
};
+
+ sd_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sd_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ wlan_en: wlan-en-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* GPIO_051_WIFI_EN */
+ gpio = <&gpio6 3 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
/*
@@ -354,6 +388,47 @@
"GPIO_231_HDMI_INT";
};
+&dwmmc1 {
+ bus-width = <0x4>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ cap-sd-highspeed;
+ disable-wp;
+ cd-inverted;
+ cd-gpios = <&gpio25 5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pmx_func
+ &sd_clk_cfg_func
+ &sd_cfg_func>;
+ vmmc-supply = <&sd_3v3>;
+ vqmmc-supply = <&sd_1v8>;
+ status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+ bus-width = <0x4>;
+ non-removable;
+ broken-cd;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pmx_func
+ &sdio_clk_cfg_func
+ &sdio_cfg_func>;
+ /* WL_EN */
+ vmmc-supply = <&wlan_en>;
+ status = "ok";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>; /* sdio func num */
+ /* WL_IRQ, GPIO_177_WL_WAKEUP_AP */
+ interrupt-parent = <&gpio22>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
&uart0 {
/* On High speed expansion header */
label = "HS-UART0";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 2ed06e4588b8..2dcffa3ed218 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -151,6 +151,13 @@
#clock-cells = <1>;
};
+ crg_rst: crg_rst_controller {
+ compatible = "hisilicon,hi3670-reset",
+ "hisilicon,hi3660-reset";
+ #reset-cells = <2>;
+ hisi,rst-syscon = <&crg_ctrl>;
+ };
+
pctrl: pctrl@e8a09000 {
compatible = "hisilicon,hi3670-pctrl", "syscon";
reg = <0x0 0xe8a09000 0x0 0x1000>;
@@ -647,5 +654,60 @@
clocks = <&sctrl HI3670_PCLK_AO_GPIO6>;
clock-names = "apb_pclk";
};
+
+ /* UFS */
+ ufs: ufs@ff3c0000 {
+ compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
+ /* 0: HCI standard */
+ /* 1: UFS SYS CTRL */
+ reg = <0x0 0xff3c0000 0x0 0x1000>,
+ <0x0 0xff3e0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
+ <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+ clock-names = "ref_clk", "phy_clk";
+ freq-table-hz = <0 0>, <0 0>;
+ /* offset: 0x84; bit: 12 */
+ resets = <&crg_rst 0x84 12>;
+ reset-names = "rst";
+ };
+
+ /* SD */
+ dwmmc1: dwmmc1@ff37f000 {
+ compatible = "hisilicon,hi3670-dw-mshc",
+ "hisilicon,hi3660-dw-mshc";
+ reg = <0x0 0xff37f000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_SD>,
+ <&crg_ctrl HI3670_HCLK_GATE_SD>;
+ clock-names = "ciu", "biu";
+ clock-frequency = <3200000>;
+ resets = <&crg_rst 0x94 18>;
+ reset-names = "reset";
+ hisilicon,peripheral-syscon = <&sctrl>;
+ card-detect-delay = <200>;
+ status = "disabled";
+ };
+
+ /* SDIO */
+ dwmmc2: dwmmc2@fc183000 {
+ compatible = "hisilicon,hi3670-dw-mshc",
+ "hisilicon,hi3660-dw-mshc";
+ reg = <0x0 0xfc183000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_SDIO>,
+ <&crg_ctrl HI3670_HCLK_GATE_SDIO>;
+ clock-names = "ciu", "biu";
+ clock-frequency = <3200000>;
+ resets = <&crg_rst 0x94 20>;
+ reset-names = "reset";
+ card-detect-delay = <200>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
index 67bb52d43619..d456b0aa6f58 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
@@ -196,6 +196,16 @@
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 10 0>;
+ sdio_pmx_func: sdio_pmx_func {
+ pinctrl-single,pins = <
+ 0x000 MUX_M1 /* SDIO_CLK */
+ 0x004 MUX_M1 /* SDIO_CMD */
+ 0x008 MUX_M1 /* SDIO_DATA0 */
+ 0x00c MUX_M1 /* SDIO_DATA1 */
+ 0x010 MUX_M1 /* SDIO_DATA2 */
+ 0x014 MUX_M1 /* SDIO_DATA3 */
+ >;
+ };
};
pmx6: pinmux@fc182800 {
@@ -203,6 +213,52 @@
reg = <0x0 0xfc182800 0x0 0x028>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <0x20>;
+
+ sdio_clk_cfg_func: sdio_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* SDIO_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_32MA DRIVE6_MASK
+ >;
+ };
+
+ sdio_cfg_func: sdio_cfg_func {
+ pinctrl-single,pins = <
+ 0x004 0x0 /* SDIO_CMD */
+ 0x008 0x0 /* SDIO_DATA0 */
+ 0x00c 0x0 /* SDIO_DATA1 */
+ 0x010 0x0 /* SDIO_DATA2 */
+ 0x014 0x0 /* SDIO_DATA3 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_19MA DRIVE6_MASK
+ >;
+ };
};
pmx7: pinmux@ff37e000 {
@@ -214,6 +270,17 @@
pinctrl-single,function-mask = <7>;
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 12 0>;
+
+ sd_pmx_func: sd_pmx_func {
+ pinctrl-single,pins = <
+ 0x000 MUX_M1 /* SD_CLK */
+ 0x004 MUX_M1 /* SD_CMD */
+ 0x008 MUX_M1 /* SD_DATA0 */
+ 0x00c MUX_M1 /* SD_DATA1 */
+ 0x010 MUX_M1 /* SD_DATA2 */
+ 0x014 MUX_M1 /* SD_DATA3 */
+ >;
+ };
};
pmx8: pinmux@ff37e800 {
@@ -221,6 +288,54 @@
reg = <0x0 0xff37e800 0x0 0x030>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <0x20>;
+
+ sd_clk_cfg_func: sd_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* SD_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_32MA
+ DRIVE6_MASK
+ >;
+ };
+
+ sd_cfg_func: sd_cfg_func {
+ pinctrl-single,pins = <
+ 0x004 0x0 /* SD_CMD */
+ 0x008 0x0 /* SD_DATA0 */
+ 0x00c 0x0 /* SD_DATA1 */
+ 0x010 0x0 /* SD_DATA2 */
+ 0x014 0x0 /* SD_DATA3 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_19MA
+ DRIVE6_MASK
+ >;
+ };
};
pmx1: pinmux@fff11000 {
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
new file mode 100644
index 000000000000..9606ac85ac70
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -0,0 +1 @@
+dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
new file mode 100644
index 000000000000..e4ceb3a73c81
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "intel,socfpga-agilex";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x1>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x2>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x3>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 120 8>,
+ <0 121 8>,
+ <0 122 8>,
+ <0 123 8>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ interrupt-parent = <&intc>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ intc: intc@fffc1000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0xfffc1000 0x0 0x1000>,
+ <0x0 0xfffc2000 0x0 0x2000>,
+ <0x0 0xfffc4000 0x0 0x2000>,
+ <0x0 0xfffc6000 0x0 0x2000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges = <0 0 0 0xffffffff>;
+
+ gmac0: ethernet@ff800000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff800000 0x2000>;
+ interrupts = <0 90 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+ reset-names = "stmmaceth", "stmmaceth-ocp";
+ tx-fifo-depth = <16384>;
+ rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <256>;
+ iommus = <&smmu 1>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff802000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff802000 0x2000>;
+ interrupts = <0 91 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+ reset-names = "stmmaceth", "stmmaceth-ocp";
+ tx-fifo-depth = <16384>;
+ rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <256>;
+ iommus = <&smmu 2>;
+ status = "disabled";
+ };
+
+ gmac2: ethernet@ff804000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff804000 0x2000>;
+ interrupts = <0 92 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+ reset-names = "stmmaceth", "stmmaceth-ocp";
+ tx-fifo-depth = <16384>;
+ rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <256>;
+ iommus = <&smmu 3>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@ffc03200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc03200 0x100>;
+ resets = <&rst GPIO0_RESET>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 110 4>;
+ };
+ };
+
+ gpio1: gpio@ffc03300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc03300 0x100>;
+ resets = <&rst GPIO1_RESET>;
+ status = "disabled";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 111 4>;
+ };
+ };
+
+ i2c0: i2c@ffc02800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02800 0x100>;
+ interrupts = <0 103 4>;
+ resets = <&rst I2C0_RESET>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc02900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02900 0x100>;
+ interrupts = <0 104 4>;
+ resets = <&rst I2C1_RESET>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc02a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02a00 0x100>;
+ interrupts = <0 105 4>;
+ resets = <&rst I2C2_RESET>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc02b00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02b00 0x100>;
+ interrupts = <0 106 4>;
+ resets = <&rst I2C3_RESET>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ffc02c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02c00 0x100>;
+ interrupts = <0 107 4>;
+ resets = <&rst I2C4_RESET>;
+ status = "disabled";
+ };
+
+ mmc: dwmmc0@ff808000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff808000 0x1000>;
+ interrupts = <0 96 4>;
+ fifo-depth = <0x400>;
+ resets = <&rst SDMMC_RESET>;
+ reset-names = "reset";
+ iommus = <&smmu 5>;
+ status = "disabled";
+ };
+
+ ocram: sram@ffe00000 {
+ compatible = "mmio-sram";
+ reg = <0xffe00000 0x40000>;
+ };
+
+ pdma: pdma@ffda0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xffda0000 0x1000>;
+ interrupts = <0 81 4>,
+ <0 82 4>,
+ <0 83 4>,
+ <0 84 4>,
+ <0 85 4>,
+ <0 86 4>,
+ <0 87 4>,
+ <0 88 4>,
+ <0 89 4>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ rst: rstmgr@ffd11000 {
+ #reset-cells = <1>;
+ compatible = "altr,stratix10-rst-mgr";
+ reg = <0xffd11000 0x100>;
+ };
+
+ smmu: iommu@fa000000 {
+ compatible = "arm,mmu-500", "arm,smmu-v2";
+ reg = <0xfa000000 0x40000>;
+ #global-interrupts = <2>;
+ #iommu-cells = <1>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 128 4>, /* Global Secure Fault */
+ <0 129 4>, /* Global Non-secure Fault */
+ /* Non-secure Context Interrupts (32) */
+ <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+ <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+ <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+ <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+ <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+ <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+ <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+ <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+ stream-match-mask = <0x7ff0>;
+ status = "disabled";
+ };
+
+ spi0: spi@ffda4000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda4000 0x1000>;
+ interrupts = <0 99 4>;
+ resets = <&rst SPIM0_RESET>;
+ reg-io-width = <4>;
+ num-cs = <4>;
+ status = "disabled";
+ };
+
+ spi1: spi@ffda5000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda5000 0x1000>;
+ interrupts = <0 100 4>;
+ resets = <&rst SPIM1_RESET>;
+ reg-io-width = <4>;
+ num-cs = <4>;
+ status = "disabled";
+ };
+
+ sysmgr: sysmgr@ffd12000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd12000 0x500>;
+ };
+
+ /* Local timer */
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ timer0: timer0@ffc03000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 113 4>;
+ reg = <0xffc03000 0x100>;
+ };
+
+ timer1: timer1@ffc03100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 114 4>;
+ reg = <0xffc03100 0x100>;
+ };
+
+ timer2: timer2@ffd00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 115 4>;
+ reg = <0xffd00000 0x100>;
+ };
+
+ timer3: timer3@ffd00100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 116 4>;
+ reg = <0xffd00100 0x100>;
+ };
+
+ uart0: serial0@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x100>;
+ interrupts = <0 108 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ resets = <&rst UART0_RESET>;
+ status = "disabled";
+ };
+
+ uart1: serial1@ffc02100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02100 0x100>;
+ interrupts = <0 109 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ resets = <&rst UART1_RESET>;
+ status = "disabled";
+ };
+
+ usbphy0: usbphy@0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0x40000>;
+ interrupts = <0 93 4>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+ reset-names = "dwc2", "dwc2-ecc";
+ iommus = <&smmu 6>;
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0x40000>;
+ interrupts = <0 94 4>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
+ reset-names = "dwc2", "dwc2-ecc";
+ iommus = <&smmu 7>;
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@ffd00200 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00200 0x100>;
+ interrupts = <0 117 4>;
+ resets = <&rst WATCHDOG0_RESET>;
+ status = "disabled";
+ };
+
+ watchdog1: watchdog@ffd00300 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00300 0x100>;
+ interrupts = <0 118 4>;
+ resets = <&rst WATCHDOG1_RESET>;
+ status = "disabled";
+ };
+
+ watchdog2: watchdog@ffd00400 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00400 0x100>;
+ interrupts = <0 125 4>;
+ resets = <&rst WATCHDOG2_RESET>;
+ status = "disabled";
+ };
+
+ watchdog3: watchdog@ffd00500 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00500 0x100>;
+ interrupts = <0 126 4>;
+ resets = <&rst WATCHDOG3_RESET>;
+ status = "disabled";
+ };
+
+ sdr: sdr@f8011100 {
+ compatible = "altr,sdr-ctl", "syscon";
+ reg = <0xf8011100 0xc0>;
+ };
+
+ qspi: spi@ff8d2000 {
+ compatible = "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xff8d2000 0x100>,
+ <0xff900000 0x100000>;
+ interrupts = <0 3 4>;
+ cdns,fifo-depth = <128>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x00000000>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
new file mode 100644
index 000000000000..7814a9e8eb08
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+ model = "SoCFPGA Agilex SoCDK";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ max-frame-size = <9000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <4>;
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <900>; /* 0ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ };
+ };
+};
+
+&mmc {
+ status = "okay";
+ cap-sd-highspeed;
+ broken-cd;
+ bus-width = <4>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 2468762283a5..9143aa13ceb1 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -226,6 +226,11 @@
marvell,function = "gpio";
};
+ cp0_wlan_disable_pins: wlan-disable-pins {
+ marvell,pins = "mpp51";
+ marvell,function = "gpio";
+ };
+
cp0_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
@@ -235,7 +240,7 @@
&cp0_pcie0 {
pinctrl-names = "default";
- pinctrl-0 = <&cp0_pci0_reset_pins>;
+ pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>;
reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -253,6 +258,12 @@
output-low;
};
+ wlan_disable {
+ gpio-hog;
+ gpios = <19 GPIO_ACTIVE_LOW>;
+ output-low;
+ };
+
lte_disable {
gpio-hog;
gpios = <21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c3c360161c5d..15f1842f6df3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -178,12 +178,12 @@
cpu2: cpu@100 {
device_type = "cpu";
- compatible = "arm,cortex-a57";
+ compatible = "arm,cortex-a72";
reg = <0x100>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
#cooling-cells = <2>;
- clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ clocks = <&infracfg CLK_INFRA_CA72SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cluster1_opp>;
@@ -191,12 +191,12 @@
cpu3: cpu@101 {
device_type = "cpu";
- compatible = "arm,cortex-a57";
+ compatible = "arm,cortex-a72";
reg = <0x101>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
#cooling-cells = <2>;
- clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ clocks = <&infracfg CLK_INFRA_CA72SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cluster1_opp>;
@@ -216,6 +216,20 @@
};
};
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ pmu_a72 {
+ compatible = "arm,cortex-a72-pmu";
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu2>, <&cpu3>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
method = "smc";
@@ -1307,6 +1321,15 @@
"vencpll",
"venc_lt_sel",
"vdec_bus_clk_src";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+ <&topckgen CLK_TOP_CCI400_SEL>,
+ <&topckgen CLK_TOP_VDEC_SEL>,
+ <&apmixedsys CLK_APMIXED_VCODECPLL>,
+ <&apmixedsys CLK_APMIXED_VENCPLL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+ <&topckgen CLK_TOP_UNIVPLL_D2>,
+ <&topckgen CLK_TOP_VCODECPLL>;
+ assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
};
larb1: larb@16010000 {
@@ -1372,6 +1395,10 @@
"venc_sel",
"venc_lt_sel_src",
"venc_lt_sel";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
+ <&topckgen CLK_TOP_UNIVPLL1_D2>;
};
vencltsys: clock-controller@19000000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h
new file mode 100644
index 000000000000..6221cd712718
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h
@@ -0,0 +1,1120 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Zhiyong Tao <zhiyong.tao@mediatek.com>
+ *
+ */
+
+#ifndef __MT8183_PINFUNC_H
+#define __MT8183_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_MRG_SYNC (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_PCM0_SYNC (MTK_PIN_NO(0) | 2)
+#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 3)
+#define PINMUX_GPIO0__FUNC_SRCLKENAI0 (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_SCP_SPI2_CS (MTK_PIN_NO(0) | 5)
+#define PINMUX_GPIO0__FUNC_I2S3_MCK (MTK_PIN_NO(0) | 6)
+#define PINMUX_GPIO0__FUNC_SPI2_CSB (MTK_PIN_NO(0) | 7)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_MRG_CLK (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_PCM0_CLK (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_CLKM3 (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_SCP_SPI2_MO (MTK_PIN_NO(1) | 5)
+#define PINMUX_GPIO1__FUNC_I2S3_BCK (MTK_PIN_NO(1) | 6)
+#define PINMUX_GPIO1__FUNC_SPI2_MO (MTK_PIN_NO(1) | 7)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_MRG_DO (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_PCM0_DO (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 3)
+#define PINMUX_GPIO2__FUNC_SCL6 (MTK_PIN_NO(2) | 4)
+#define PINMUX_GPIO2__FUNC_SCP_SPI2_CK (MTK_PIN_NO(2) | 5)
+#define PINMUX_GPIO2__FUNC_I2S3_LRCK (MTK_PIN_NO(2) | 6)
+#define PINMUX_GPIO2__FUNC_SPI2_CLK (MTK_PIN_NO(2) | 7)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_MRG_DI (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_PCM0_DI (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 3)
+#define PINMUX_GPIO3__FUNC_SDA6 (MTK_PIN_NO(3) | 4)
+#define PINMUX_GPIO3__FUNC_TDM_MCK (MTK_PIN_NO(3) | 5)
+#define PINMUX_GPIO3__FUNC_I2S3_DO (MTK_PIN_NO(3) | 6)
+#define PINMUX_GPIO3__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(3) | 7)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_PWM_B (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_I2S0_MCK (MTK_PIN_NO(4) | 2)
+#define PINMUX_GPIO4__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(4) | 3)
+#define PINMUX_GPIO4__FUNC_MD_URXD1 (MTK_PIN_NO(4) | 4)
+#define PINMUX_GPIO4__FUNC_TDM_BCK (MTK_PIN_NO(4) | 5)
+#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 6)
+#define PINMUX_GPIO4__FUNC_DAP_MD32_SWD (MTK_PIN_NO(4) | 7)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_PWM_C (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_I2S0_BCK (MTK_PIN_NO(5) | 2)
+#define PINMUX_GPIO5__FUNC_SSPM_URXD_AO (MTK_PIN_NO(5) | 3)
+#define PINMUX_GPIO5__FUNC_MD_UTXD1 (MTK_PIN_NO(5) | 4)
+#define PINMUX_GPIO5__FUNC_TDM_LRCK (MTK_PIN_NO(5) | 5)
+#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 6)
+#define PINMUX_GPIO5__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(5) | 7)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_PWM_A (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_I2S0_LRCK (MTK_PIN_NO(6) | 2)
+#define PINMUX_GPIO6__FUNC_IDDIG (MTK_PIN_NO(6) | 3)
+#define PINMUX_GPIO6__FUNC_MD_URXD0 (MTK_PIN_NO(6) | 4)
+#define PINMUX_GPIO6__FUNC_TDM_DATA0 (MTK_PIN_NO(6) | 5)
+#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 6)
+#define PINMUX_GPIO6__FUNC_CMFLASH (MTK_PIN_NO(6) | 7)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI1_B_MI (MTK_PIN_NO(7) | 1)
+#define PINMUX_GPIO7__FUNC_I2S0_DI (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_USB_DRVVBUS (MTK_PIN_NO(7) | 3)
+#define PINMUX_GPIO7__FUNC_MD_UTXD0 (MTK_PIN_NO(7) | 4)
+#define PINMUX_GPIO7__FUNC_TDM_DATA1 (MTK_PIN_NO(7) | 5)
+#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 6)
+#define PINMUX_GPIO7__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(7) | 7)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SPI1_B_CSB (MTK_PIN_NO(8) | 1)
+#define PINMUX_GPIO8__FUNC_ANT_SEL3 (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_SCL7 (MTK_PIN_NO(8) | 3)
+#define PINMUX_GPIO8__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(8) | 4)
+#define PINMUX_GPIO8__FUNC_TDM_DATA2 (MTK_PIN_NO(8) | 5)
+#define PINMUX_GPIO8__FUNC_MD_INT0 (MTK_PIN_NO(8) | 6)
+#define PINMUX_GPIO8__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(8) | 7)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_SPI1_B_MO (MTK_PIN_NO(9) | 1)
+#define PINMUX_GPIO9__FUNC_ANT_SEL4 (MTK_PIN_NO(9) | 2)
+#define PINMUX_GPIO9__FUNC_CMMCLK2 (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(9) | 4)
+#define PINMUX_GPIO9__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(9) | 5)
+#define PINMUX_GPIO9__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(9) | 6)
+#define PINMUX_GPIO9__FUNC_DBG_MON_B10 (MTK_PIN_NO(9) | 7)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_SPI1_B_CLK (MTK_PIN_NO(10) | 1)
+#define PINMUX_GPIO10__FUNC_ANT_SEL5 (MTK_PIN_NO(10) | 2)
+#define PINMUX_GPIO10__FUNC_CMMCLK3 (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(10) | 4)
+#define PINMUX_GPIO10__FUNC_TDM_DATA3 (MTK_PIN_NO(10) | 5)
+#define PINMUX_GPIO10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 6)
+#define PINMUX_GPIO10__FUNC_DBG_MON_B11 (MTK_PIN_NO(10) | 7)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_TP_URXD1_AO (MTK_PIN_NO(11) | 1)
+#define PINMUX_GPIO11__FUNC_IDDIG (MTK_PIN_NO(11) | 2)
+#define PINMUX_GPIO11__FUNC_SCL6 (MTK_PIN_NO(11) | 3)
+#define PINMUX_GPIO11__FUNC_UCTS1 (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_UCTS0 (MTK_PIN_NO(11) | 5)
+#define PINMUX_GPIO11__FUNC_SRCLKENAI1 (MTK_PIN_NO(11) | 6)
+#define PINMUX_GPIO11__FUNC_I2S5_MCK (MTK_PIN_NO(11) | 7)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_TP_UTXD1_AO (MTK_PIN_NO(12) | 1)
+#define PINMUX_GPIO12__FUNC_USB_DRVVBUS (MTK_PIN_NO(12) | 2)
+#define PINMUX_GPIO12__FUNC_SDA6 (MTK_PIN_NO(12) | 3)
+#define PINMUX_GPIO12__FUNC_URTS1 (MTK_PIN_NO(12) | 4)
+#define PINMUX_GPIO12__FUNC_URTS0 (MTK_PIN_NO(12) | 5)
+#define PINMUX_GPIO12__FUNC_I2S2_DI2 (MTK_PIN_NO(12) | 6)
+#define PINMUX_GPIO12__FUNC_I2S5_BCK (MTK_PIN_NO(12) | 7)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_DBPI_D0 (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_SPI5_MI (MTK_PIN_NO(13) | 2)
+#define PINMUX_GPIO13__FUNC_PCM0_SYNC (MTK_PIN_NO(13) | 3)
+#define PINMUX_GPIO13__FUNC_MD_URXD0 (MTK_PIN_NO(13) | 4)
+#define PINMUX_GPIO13__FUNC_ANT_SEL3 (MTK_PIN_NO(13) | 5)
+#define PINMUX_GPIO13__FUNC_I2S0_MCK (MTK_PIN_NO(13) | 6)
+#define PINMUX_GPIO13__FUNC_DBG_MON_B15 (MTK_PIN_NO(13) | 7)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_DBPI_D1 (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_SPI5_CSB (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_PCM0_CLK (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_MD_UTXD0 (MTK_PIN_NO(14) | 4)
+#define PINMUX_GPIO14__FUNC_ANT_SEL4 (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_I2S0_BCK (MTK_PIN_NO(14) | 6)
+#define PINMUX_GPIO14__FUNC_DBG_MON_B16 (MTK_PIN_NO(14) | 7)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_DBPI_D2 (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_SPI5_MO (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_PCM0_DO (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_MD_URXD1 (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_ANT_SEL5 (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_I2S0_LRCK (MTK_PIN_NO(15) | 6)
+#define PINMUX_GPIO15__FUNC_DBG_MON_B17 (MTK_PIN_NO(15) | 7)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_DBPI_D3 (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_SPI5_CLK (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_PCM0_DI (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_MD_UTXD1 (MTK_PIN_NO(16) | 4)
+#define PINMUX_GPIO16__FUNC_ANT_SEL6 (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_I2S0_DI (MTK_PIN_NO(16) | 6)
+#define PINMUX_GPIO16__FUNC_DBG_MON_B23 (MTK_PIN_NO(16) | 7)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_DBPI_D4 (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_SPI4_MI (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_MD_INT0 (MTK_PIN_NO(17) | 4)
+#define PINMUX_GPIO17__FUNC_ANT_SEL7 (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_I2S3_MCK (MTK_PIN_NO(17) | 6)
+#define PINMUX_GPIO17__FUNC_DBG_MON_A1 (MTK_PIN_NO(17) | 7)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_DBPI_D5 (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_SPI4_CSB (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_MD_INT0 (MTK_PIN_NO(18) | 4)
+#define PINMUX_GPIO18__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(18) | 5)
+#define PINMUX_GPIO18__FUNC_I2S3_BCK (MTK_PIN_NO(18) | 6)
+#define PINMUX_GPIO18__FUNC_DBG_MON_A2 (MTK_PIN_NO(18) | 7)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_DBPI_D6 (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_SPI4_MO (MTK_PIN_NO(19) | 2)
+#define PINMUX_GPIO19__FUNC_CONN_MCU_TDO (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_URXD1 (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_I2S3_LRCK (MTK_PIN_NO(19) | 6)
+#define PINMUX_GPIO19__FUNC_DBG_MON_A3 (MTK_PIN_NO(19) | 7)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_DBPI_D7 (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_SPI4_CLK (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(20) | 3)
+#define PINMUX_GPIO20__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(20) | 4)
+#define PINMUX_GPIO20__FUNC_UTXD1 (MTK_PIN_NO(20) | 5)
+#define PINMUX_GPIO20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 6)
+#define PINMUX_GPIO20__FUNC_DBG_MON_A19 (MTK_PIN_NO(20) | 7)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_DBPI_D8 (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_SPI3_MI (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_CONN_MCU_TMS (MTK_PIN_NO(21) | 3)
+#define PINMUX_GPIO21__FUNC_DAP_MD32_SWD (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(21) | 5)
+#define PINMUX_GPIO21__FUNC_I2S2_MCK (MTK_PIN_NO(21) | 6)
+#define PINMUX_GPIO21__FUNC_DBG_MON_B5 (MTK_PIN_NO(21) | 7)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_DBPI_D9 (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_SPI3_CSB (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_CONN_MCU_TCK (MTK_PIN_NO(22) | 3)
+#define PINMUX_GPIO22__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(22) | 5)
+#define PINMUX_GPIO22__FUNC_I2S2_BCK (MTK_PIN_NO(22) | 6)
+#define PINMUX_GPIO22__FUNC_DBG_MON_B6 (MTK_PIN_NO(22) | 7)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_DBPI_D10 (MTK_PIN_NO(23) | 1)
+#define PINMUX_GPIO23__FUNC_SPI3_MO (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_CONN_MCU_TDI (MTK_PIN_NO(23) | 3)
+#define PINMUX_GPIO23__FUNC_UCTS1 (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5)
+#define PINMUX_GPIO23__FUNC_I2S2_LRCK (MTK_PIN_NO(23) | 6)
+#define PINMUX_GPIO23__FUNC_DBG_MON_B7 (MTK_PIN_NO(23) | 7)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_DBPI_D11 (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_SPI3_CLK (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_SRCLKENAI0 (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_URTS1 (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_IO_JTAG_TCK (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_I2S2_DI (MTK_PIN_NO(24) | 6)
+#define PINMUX_GPIO24__FUNC_DBG_MON_B31 (MTK_PIN_NO(24) | 7)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_DBPI_HSYNC (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_SCL6 (MTK_PIN_NO(25) | 3)
+#define PINMUX_GPIO25__FUNC_KPCOL2 (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_IO_JTAG_TMS (MTK_PIN_NO(25) | 5)
+#define PINMUX_GPIO25__FUNC_I2S1_MCK (MTK_PIN_NO(25) | 6)
+#define PINMUX_GPIO25__FUNC_DBG_MON_B0 (MTK_PIN_NO(25) | 7)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_DBPI_VSYNC (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_ANT_SEL1 (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_SDA6 (MTK_PIN_NO(26) | 3)
+#define PINMUX_GPIO26__FUNC_KPROW2 (MTK_PIN_NO(26) | 4)
+#define PINMUX_GPIO26__FUNC_IO_JTAG_TDI (MTK_PIN_NO(26) | 5)
+#define PINMUX_GPIO26__FUNC_I2S1_BCK (MTK_PIN_NO(26) | 6)
+#define PINMUX_GPIO26__FUNC_DBG_MON_B1 (MTK_PIN_NO(26) | 7)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_DBPI_DE (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_ANT_SEL2 (MTK_PIN_NO(27) | 2)
+#define PINMUX_GPIO27__FUNC_SCL7 (MTK_PIN_NO(27) | 3)
+#define PINMUX_GPIO27__FUNC_DMIC_CLK (MTK_PIN_NO(27) | 4)
+#define PINMUX_GPIO27__FUNC_IO_JTAG_TDO (MTK_PIN_NO(27) | 5)
+#define PINMUX_GPIO27__FUNC_I2S1_LRCK (MTK_PIN_NO(27) | 6)
+#define PINMUX_GPIO27__FUNC_DBG_MON_B9 (MTK_PIN_NO(27) | 7)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_DBPI_CK (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(28) | 2)
+#define PINMUX_GPIO28__FUNC_SDA7 (MTK_PIN_NO(28) | 3)
+#define PINMUX_GPIO28__FUNC_DMIC_DAT (MTK_PIN_NO(28) | 4)
+#define PINMUX_GPIO28__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(28) | 5)
+#define PINMUX_GPIO28__FUNC_I2S1_DO (MTK_PIN_NO(28) | 6)
+#define PINMUX_GPIO28__FUNC_DBG_MON_B32 (MTK_PIN_NO(28) | 7)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_MSDC1_CLK (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_IO_JTAG_TCK (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_UDI_TCK (MTK_PIN_NO(29) | 3)
+#define PINMUX_GPIO29__FUNC_CONN_DSP_JCK (MTK_PIN_NO(29) | 4)
+#define PINMUX_GPIO29__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(29) | 5)
+#define PINMUX_GPIO29__FUNC_PCM1_CLK (MTK_PIN_NO(29) | 6)
+#define PINMUX_GPIO29__FUNC_DBG_MON_A6 (MTK_PIN_NO(29) | 7)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_MSDC1_DAT3 (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_DAP_MD32_SWD (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(30) | 3)
+#define PINMUX_GPIO30__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(30) | 4)
+#define PINMUX_GPIO30__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(30) | 5)
+#define PINMUX_GPIO30__FUNC_PCM1_DI (MTK_PIN_NO(30) | 6)
+#define PINMUX_GPIO30__FUNC_DBG_MON_A7 (MTK_PIN_NO(30) | 7)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_MSDC1_CMD (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_IO_JTAG_TMS (MTK_PIN_NO(31) | 2)
+#define PINMUX_GPIO31__FUNC_UDI_TMS (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_CONN_DSP_JMS (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(31) | 5)
+#define PINMUX_GPIO31__FUNC_PCM1_SYNC (MTK_PIN_NO(31) | 6)
+#define PINMUX_GPIO31__FUNC_DBG_MON_A8 (MTK_PIN_NO(31) | 7)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_MSDC1_DAT0 (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_IO_JTAG_TDI (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_UDI_TDI (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_CONN_DSP_JDI (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(32) | 5)
+#define PINMUX_GPIO32__FUNC_PCM1_DO0 (MTK_PIN_NO(32) | 6)
+#define PINMUX_GPIO32__FUNC_DBG_MON_A9 (MTK_PIN_NO(32) | 7)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_MSDC1_DAT2 (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(33) | 2)
+#define PINMUX_GPIO33__FUNC_UDI_NTRST (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(33) | 5)
+#define PINMUX_GPIO33__FUNC_PCM1_DO2 (MTK_PIN_NO(33) | 6)
+#define PINMUX_GPIO33__FUNC_DBG_MON_A10 (MTK_PIN_NO(33) | 7)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_MSDC1_DAT1 (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_IO_JTAG_TDO (MTK_PIN_NO(34) | 2)
+#define PINMUX_GPIO34__FUNC_UDI_TDO (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_CONN_DSP_JDO (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(34) | 5)
+#define PINMUX_GPIO34__FUNC_PCM1_DO1 (MTK_PIN_NO(34) | 6)
+#define PINMUX_GPIO34__FUNC_DBG_MON_A11 (MTK_PIN_NO(34) | 7)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_CCU_JTAG_TDO (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_SCP_JTAG_TDO (MTK_PIN_NO(35) | 5)
+#define PINMUX_GPIO35__FUNC_CONN_DSP_JMS (MTK_PIN_NO(35) | 6)
+#define PINMUX_GPIO35__FUNC_DBG_MON_A28 (MTK_PIN_NO(35) | 7)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_CCU_JTAG_TMS (MTK_PIN_NO(36) | 2)
+#define PINMUX_GPIO36__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(36) | 4)
+#define PINMUX_GPIO36__FUNC_SCP_JTAG_TMS (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(36) | 6)
+#define PINMUX_GPIO36__FUNC_DBG_MON_A29 (MTK_PIN_NO(36) | 7)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_CCU_JTAG_TDI (MTK_PIN_NO(37) | 2)
+#define PINMUX_GPIO37__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_SCP_JTAG_TDI (MTK_PIN_NO(37) | 5)
+#define PINMUX_GPIO37__FUNC_CONN_DSP_JDO (MTK_PIN_NO(37) | 6)
+#define PINMUX_GPIO37__FUNC_DBG_MON_A30 (MTK_PIN_NO(37) | 7)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(38) | 1)
+#define PINMUX_GPIO38__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(38) | 4)
+#define PINMUX_GPIO38__FUNC_DBG_MON_A20 (MTK_PIN_NO(38) | 7)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_CCU_JTAG_TCK (MTK_PIN_NO(39) | 2)
+#define PINMUX_GPIO39__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_SCP_JTAG_TCK (MTK_PIN_NO(39) | 5)
+#define PINMUX_GPIO39__FUNC_CONN_DSP_JCK (MTK_PIN_NO(39) | 6)
+#define PINMUX_GPIO39__FUNC_DBG_MON_A31 (MTK_PIN_NO(39) | 7)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_CCU_JTAG_TRST (MTK_PIN_NO(40) | 2)
+#define PINMUX_GPIO40__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(40) | 3)
+#define PINMUX_GPIO40__FUNC_SCP_JTAG_TRSTN (MTK_PIN_NO(40) | 5)
+#define PINMUX_GPIO40__FUNC_CONN_DSP_JDI (MTK_PIN_NO(40) | 6)
+#define PINMUX_GPIO40__FUNC_DBG_MON_A32 (MTK_PIN_NO(40) | 7)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_IDDIG (MTK_PIN_NO(41) | 1)
+#define PINMUX_GPIO41__FUNC_URXD1 (MTK_PIN_NO(41) | 2)
+#define PINMUX_GPIO41__FUNC_UCTS0 (MTK_PIN_NO(41) | 3)
+#define PINMUX_GPIO41__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(41) | 4)
+#define PINMUX_GPIO41__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 5)
+#define PINMUX_GPIO41__FUNC_DMIC_CLK (MTK_PIN_NO(41) | 6)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_USB_DRVVBUS (MTK_PIN_NO(42) | 1)
+#define PINMUX_GPIO42__FUNC_UTXD1 (MTK_PIN_NO(42) | 2)
+#define PINMUX_GPIO42__FUNC_URTS0 (MTK_PIN_NO(42) | 3)
+#define PINMUX_GPIO42__FUNC_SSPM_URXD_AO (MTK_PIN_NO(42) | 4)
+#define PINMUX_GPIO42__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(42) | 5)
+#define PINMUX_GPIO42__FUNC_DMIC_DAT (MTK_PIN_NO(42) | 6)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_DISP_PWM (MTK_PIN_NO(43) | 1)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_DSI_TE (MTK_PIN_NO(44) | 1)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_LCM_RST (MTK_PIN_NO(45) | 1)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_URXD1 (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_UCTS1 (MTK_PIN_NO(46) | 3)
+#define PINMUX_GPIO46__FUNC_CCU_UTXD_AO (MTK_PIN_NO(46) | 4)
+#define PINMUX_GPIO46__FUNC_TP_UCTS1_AO (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_IDDIG (MTK_PIN_NO(46) | 6)
+#define PINMUX_GPIO46__FUNC_I2S5_LRCK (MTK_PIN_NO(46) | 7)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_UTXD1 (MTK_PIN_NO(47) | 2)
+#define PINMUX_GPIO47__FUNC_URTS1 (MTK_PIN_NO(47) | 3)
+#define PINMUX_GPIO47__FUNC_CCU_URXD_AO (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_TP_URTS1_AO (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_USB_DRVVBUS (MTK_PIN_NO(47) | 6)
+#define PINMUX_GPIO47__FUNC_I2S5_DO (MTK_PIN_NO(47) | 7)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_SCL5 (MTK_PIN_NO(48) | 1)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_SDA5 (MTK_PIN_NO(49) | 1)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_SCL3 (MTK_PIN_NO(50) | 1)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_SDA3 (MTK_PIN_NO(51) | 1)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_BPI_ANT2 (MTK_PIN_NO(52) | 1)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_BPI_ANT0 (MTK_PIN_NO(53) | 1)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_BPI_OLAT1 (MTK_PIN_NO(54) | 1)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_BPI_BUS8 (MTK_PIN_NO(55) | 1)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_BPI_BUS9 (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_SCL_6306 (MTK_PIN_NO(56) | 2)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_BPI_BUS10 (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_SDA_6306 (MTK_PIN_NO(57) | 2)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_RFIC0_BSI_D2 (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_SPM_BSI_D2 (MTK_PIN_NO(58) | 2)
+#define PINMUX_GPIO58__FUNC_PWM_B (MTK_PIN_NO(58) | 3)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_RFIC0_BSI_D1 (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_SPM_BSI_D1 (MTK_PIN_NO(59) | 2)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_RFIC0_BSI_D0 (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_SPM_BSI_D0 (MTK_PIN_NO(60) | 2)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_MIPI1_SDATA (MTK_PIN_NO(61) | 1)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_MIPI1_SCLK (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_MIPI0_SDATA (MTK_PIN_NO(63) | 1)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_MIPI0_SCLK (MTK_PIN_NO(64) | 1)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_MIPI3_SDATA (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_BPI_OLAT2 (MTK_PIN_NO(65) | 2)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_MIPI3_SCLK (MTK_PIN_NO(66) | 1)
+#define PINMUX_GPIO66__FUNC_BPI_OLAT3 (MTK_PIN_NO(66) | 2)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_MIPI2_SDATA (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_MIPI2_SCLK (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_BPI_BUS7 (MTK_PIN_NO(69) | 1)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_BPI_BUS6 (MTK_PIN_NO(70) | 1)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define PINMUX_GPIO71__FUNC_BPI_BUS5 (MTK_PIN_NO(71) | 1)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define PINMUX_GPIO72__FUNC_BPI_BUS4 (MTK_PIN_NO(72) | 1)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define PINMUX_GPIO73__FUNC_BPI_BUS3 (MTK_PIN_NO(73) | 1)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_BPI_BUS2 (MTK_PIN_NO(74) | 1)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_BPI_BUS1 (MTK_PIN_NO(75) | 1)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_BPI_BUS0 (MTK_PIN_NO(76) | 1)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_BPI_ANT1 (MTK_PIN_NO(77) | 1)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_BPI_OLAT0 (MTK_PIN_NO(78) | 1)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_BPI_PA_VM1 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_MIPI4_SDATA (MTK_PIN_NO(79) | 2)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_BPI_PA_VM0 (MTK_PIN_NO(80) | 1)
+#define PINMUX_GPIO80__FUNC_MIPI4_SCLK (MTK_PIN_NO(80) | 2)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_SDA1 (MTK_PIN_NO(81) | 1)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_SDA0 (MTK_PIN_NO(82) | 1)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_SCL0 (MTK_PIN_NO(83) | 1)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_SCL1 (MTK_PIN_NO(84) | 1)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_SPI0_MI (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_SCP_SPI0_MI (MTK_PIN_NO(85) | 2)
+#define PINMUX_GPIO85__FUNC_CLKM3 (MTK_PIN_NO(85) | 3)
+#define PINMUX_GPIO85__FUNC_I2S1_BCK (MTK_PIN_NO(85) | 4)
+#define PINMUX_GPIO85__FUNC_MFG_DFD_JTAG_TDO (MTK_PIN_NO(85) | 5)
+#define PINMUX_GPIO85__FUNC_DFD_TDO (MTK_PIN_NO(85) | 6)
+#define PINMUX_GPIO85__FUNC_JTDO_SEL1 (MTK_PIN_NO(85) | 7)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_SPI0_CSB (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_SCP_SPI0_CS (MTK_PIN_NO(86) | 2)
+#define PINMUX_GPIO86__FUNC_CLKM0 (MTK_PIN_NO(86) | 3)
+#define PINMUX_GPIO86__FUNC_I2S1_LRCK (MTK_PIN_NO(86) | 4)
+#define PINMUX_GPIO86__FUNC_MFG_DFD_JTAG_TMS (MTK_PIN_NO(86) | 5)
+#define PINMUX_GPIO86__FUNC_DFD_TMS (MTK_PIN_NO(86) | 6)
+#define PINMUX_GPIO86__FUNC_JTMS_SEL1 (MTK_PIN_NO(86) | 7)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_SPI0_MO (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_SCP_SPI0_MO (MTK_PIN_NO(87) | 2)
+#define PINMUX_GPIO87__FUNC_SDA1 (MTK_PIN_NO(87) | 3)
+#define PINMUX_GPIO87__FUNC_I2S1_DO (MTK_PIN_NO(87) | 4)
+#define PINMUX_GPIO87__FUNC_MFG_DFD_JTAG_TDI (MTK_PIN_NO(87) | 5)
+#define PINMUX_GPIO87__FUNC_DFD_TDI (MTK_PIN_NO(87) | 6)
+#define PINMUX_GPIO87__FUNC_JTDI_SEL1 (MTK_PIN_NO(87) | 7)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_SPI0_CLK (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_SCP_SPI0_CK (MTK_PIN_NO(88) | 2)
+#define PINMUX_GPIO88__FUNC_SCL1 (MTK_PIN_NO(88) | 3)
+#define PINMUX_GPIO88__FUNC_I2S1_MCK (MTK_PIN_NO(88) | 4)
+#define PINMUX_GPIO88__FUNC_MFG_DFD_JTAG_TCK (MTK_PIN_NO(88) | 5)
+#define PINMUX_GPIO88__FUNC_DFD_TCK_XI (MTK_PIN_NO(88) | 6)
+#define PINMUX_GPIO88__FUNC_JTCK_SEL1 (MTK_PIN_NO(88) | 7)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_SRCLKENAI0 (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_PWM_C (MTK_PIN_NO(89) | 2)
+#define PINMUX_GPIO89__FUNC_I2S5_BCK (MTK_PIN_NO(89) | 3)
+#define PINMUX_GPIO89__FUNC_ANT_SEL6 (MTK_PIN_NO(89) | 4)
+#define PINMUX_GPIO89__FUNC_SDA8 (MTK_PIN_NO(89) | 5)
+#define PINMUX_GPIO89__FUNC_CMVREF0 (MTK_PIN_NO(89) | 6)
+#define PINMUX_GPIO89__FUNC_DBG_MON_A21 (MTK_PIN_NO(89) | 7)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_PWM_A (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_CMMCLK2 (MTK_PIN_NO(90) | 2)
+#define PINMUX_GPIO90__FUNC_I2S5_LRCK (MTK_PIN_NO(90) | 3)
+#define PINMUX_GPIO90__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(90) | 4)
+#define PINMUX_GPIO90__FUNC_SCL8 (MTK_PIN_NO(90) | 5)
+#define PINMUX_GPIO90__FUNC_PTA_RXD (MTK_PIN_NO(90) | 6)
+#define PINMUX_GPIO90__FUNC_DBG_MON_A22 (MTK_PIN_NO(90) | 7)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_KPROW1 (MTK_PIN_NO(91) | 1)
+#define PINMUX_GPIO91__FUNC_PWM_B (MTK_PIN_NO(91) | 2)
+#define PINMUX_GPIO91__FUNC_I2S5_DO (MTK_PIN_NO(91) | 3)
+#define PINMUX_GPIO91__FUNC_ANT_SEL7 (MTK_PIN_NO(91) | 4)
+#define PINMUX_GPIO91__FUNC_CMMCLK3 (MTK_PIN_NO(91) | 5)
+#define PINMUX_GPIO91__FUNC_PTA_TXD (MTK_PIN_NO(91) | 6)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_KPROW0 (MTK_PIN_NO(92) | 1)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_KPCOL0 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_DBG_MON_B27 (MTK_PIN_NO(93) | 7)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_KPCOL1 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_I2S2_DI2 (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_I2S5_MCK (MTK_PIN_NO(94) | 3)
+#define PINMUX_GPIO94__FUNC_CMMCLK2 (MTK_PIN_NO(94) | 4)
+#define PINMUX_GPIO94__FUNC_SCP_SPI2_MI (MTK_PIN_NO(94) | 5)
+#define PINMUX_GPIO94__FUNC_SRCLKENAI1 (MTK_PIN_NO(94) | 6)
+#define PINMUX_GPIO94__FUNC_SPI2_MI (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_URXD0 (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_UTXD0 (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_MD_URXD0 (MTK_PIN_NO(95) | 3)
+#define PINMUX_GPIO95__FUNC_MD_URXD1 (MTK_PIN_NO(95) | 4)
+#define PINMUX_GPIO95__FUNC_SSPM_URXD_AO (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_CCU_URXD_AO (MTK_PIN_NO(95) | 6)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_UTXD0 (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_URXD0 (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_MD_UTXD0 (MTK_PIN_NO(96) | 3)
+#define PINMUX_GPIO96__FUNC_MD_UTXD1 (MTK_PIN_NO(96) | 4)
+#define PINMUX_GPIO96__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_CCU_UTXD_AO (MTK_PIN_NO(96) | 6)
+#define PINMUX_GPIO96__FUNC_DBG_MON_B2 (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_UCTS0 (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_I2S2_MCK (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_IDDIG (MTK_PIN_NO(97) | 3)
+#define PINMUX_GPIO97__FUNC_CONN_MCU_TDO (MTK_PIN_NO(97) | 4)
+#define PINMUX_GPIO97__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(97) | 5)
+#define PINMUX_GPIO97__FUNC_IO_JTAG_TDO (MTK_PIN_NO(97) | 6)
+#define PINMUX_GPIO97__FUNC_DBG_MON_B3 (MTK_PIN_NO(97) | 7)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_URTS0 (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_I2S2_BCK (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_USB_DRVVBUS (MTK_PIN_NO(98) | 3)
+#define PINMUX_GPIO98__FUNC_CONN_MCU_TMS (MTK_PIN_NO(98) | 4)
+#define PINMUX_GPIO98__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(98) | 5)
+#define PINMUX_GPIO98__FUNC_IO_JTAG_TMS (MTK_PIN_NO(98) | 6)
+#define PINMUX_GPIO98__FUNC_DBG_MON_B4 (MTK_PIN_NO(98) | 7)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_CMMCLK0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_DBG_MON_B28 (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_CMMCLK1 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_PWM_C (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(100) | 3)
+#define PINMUX_GPIO100__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_DBG_MON_B29 (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_CLKM2 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_I2S2_LRCK (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_CMVREF1 (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_CONN_MCU_TCK (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(101) | 5)
+#define PINMUX_GPIO101__FUNC_IO_JTAG_TCK (MTK_PIN_NO(101) | 6)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_CLKM1 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_I2S2_DI (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_CONN_MCU_TDI (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_IO_JTAG_TDI (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DBG_MON_B8 (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_SCL2 (MTK_PIN_NO(103) | 1)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_SDA2 (MTK_PIN_NO(104) | 1)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_SCL4 (MTK_PIN_NO(105) | 1)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_SDA4 (MTK_PIN_NO(106) | 1)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_DMIC_CLK (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_ANT_SEL0 (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_CLKM0 (MTK_PIN_NO(107) | 3)
+#define PINMUX_GPIO107__FUNC_SDA7 (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(107) | 5)
+#define PINMUX_GPIO107__FUNC_PWM_A (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_DBG_MON_B12 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_CMMCLK2 (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_ANT_SEL1 (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_CLKM1 (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_SCL8 (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_DAP_MD32_SWD (MTK_PIN_NO(108) | 5)
+#define PINMUX_GPIO108__FUNC_PWM_B (MTK_PIN_NO(108) | 6)
+#define PINMUX_GPIO108__FUNC_DBG_MON_B13 (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_DMIC_DAT (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_ANT_SEL2 (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_CLKM2 (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_SDA8 (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_PWM_C (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DBG_MON_B14 (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_SCL7 (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_ANT_SEL0 (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_TP_URXD1_AO (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_USB_DRVVBUS (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_SRCLKENAI1 (MTK_PIN_NO(110) | 5)
+#define PINMUX_GPIO110__FUNC_KPCOL2 (MTK_PIN_NO(110) | 6)
+#define PINMUX_GPIO110__FUNC_URXD1 (MTK_PIN_NO(110) | 7)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_CMMCLK3 (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_ANT_SEL1 (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_SRCLKENAI0 (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(111) | 5)
+#define PINMUX_GPIO111__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(111) | 7)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_SDA7 (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_ANT_SEL2 (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_TP_UTXD1_AO (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_IDDIG (MTK_PIN_NO(112) | 4)
+#define PINMUX_GPIO112__FUNC_AGPS_SYNC (MTK_PIN_NO(112) | 5)
+#define PINMUX_GPIO112__FUNC_KPROW2 (MTK_PIN_NO(112) | 6)
+#define PINMUX_GPIO112__FUNC_UTXD1 (MTK_PIN_NO(112) | 7)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_CONN_TOP_CLK (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_SCL6 (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_AUXIF_CLK0 (MTK_PIN_NO(113) | 4)
+#define PINMUX_GPIO113__FUNC_TP_UCTS1_AO (MTK_PIN_NO(113) | 6)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_CONN_TOP_DATA (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_SDA6 (MTK_PIN_NO(114) | 3)
+#define PINMUX_GPIO114__FUNC_AUXIF_ST0 (MTK_PIN_NO(114) | 4)
+#define PINMUX_GPIO114__FUNC_TP_URTS1_AO (MTK_PIN_NO(114) | 6)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_CONN_BT_CLK (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_UTXD1 (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_PTA_TXD (MTK_PIN_NO(115) | 3)
+#define PINMUX_GPIO115__FUNC_AUXIF_CLK1 (MTK_PIN_NO(115) | 4)
+#define PINMUX_GPIO115__FUNC_DAP_MD32_SWD (MTK_PIN_NO(115) | 5)
+#define PINMUX_GPIO115__FUNC_TP_UTXD1_AO (MTK_PIN_NO(115) | 6)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_CONN_BT_DATA (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_IPU_JTAG_TRST (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_AUXIF_ST1 (MTK_PIN_NO(116) | 4)
+#define PINMUX_GPIO116__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(116) | 5)
+#define PINMUX_GPIO116__FUNC_TP_URXD2_AO (MTK_PIN_NO(116) | 6)
+#define PINMUX_GPIO116__FUNC_DBG_MON_A0 (MTK_PIN_NO(116) | 7)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_CONN_WF_HB0 (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_IPU_JTAG_TDO (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_TP_UTXD2_AO (MTK_PIN_NO(117) | 6)
+#define PINMUX_GPIO117__FUNC_DBG_MON_A4 (MTK_PIN_NO(117) | 7)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_CONN_WF_HB1 (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_IPU_JTAG_TDI (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_SSPM_URXD_AO (MTK_PIN_NO(118) | 5)
+#define PINMUX_GPIO118__FUNC_TP_UCTS2_AO (MTK_PIN_NO(118) | 6)
+#define PINMUX_GPIO118__FUNC_DBG_MON_A5 (MTK_PIN_NO(118) | 7)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_CONN_WF_HB2 (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_IPU_JTAG_TCK (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(119) | 5)
+#define PINMUX_GPIO119__FUNC_TP_URTS2_AO (MTK_PIN_NO(119) | 6)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_CONN_WB_PTA (MTK_PIN_NO(120) | 1)
+#define PINMUX_GPIO120__FUNC_IPU_JTAG_TMS (MTK_PIN_NO(120) | 2)
+#define PINMUX_GPIO120__FUNC_CCU_URXD_AO (MTK_PIN_NO(120) | 5)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_CONN_HRST_B (MTK_PIN_NO(121) | 1)
+#define PINMUX_GPIO121__FUNC_URXD1 (MTK_PIN_NO(121) | 2)
+#define PINMUX_GPIO121__FUNC_PTA_RXD (MTK_PIN_NO(121) | 3)
+#define PINMUX_GPIO121__FUNC_CCU_UTXD_AO (MTK_PIN_NO(121) | 5)
+#define PINMUX_GPIO121__FUNC_TP_URXD1_AO (MTK_PIN_NO(121) | 6)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_MSDC0_CMD (MTK_PIN_NO(122) | 1)
+#define PINMUX_GPIO122__FUNC_SSPM_URXD2_AO (MTK_PIN_NO(122) | 2)
+#define PINMUX_GPIO122__FUNC_ANT_SEL1 (MTK_PIN_NO(122) | 3)
+#define PINMUX_GPIO122__FUNC_DBG_MON_A12 (MTK_PIN_NO(122) | 7)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_MSDC0_DAT0 (MTK_PIN_NO(123) | 1)
+#define PINMUX_GPIO123__FUNC_ANT_SEL0 (MTK_PIN_NO(123) | 3)
+#define PINMUX_GPIO123__FUNC_DBG_MON_A13 (MTK_PIN_NO(123) | 7)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_MSDC0_CLK (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_DBG_MON_A14 (MTK_PIN_NO(124) | 7)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_MSDC0_DAT2 (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_MRG_CLK (MTK_PIN_NO(125) | 3)
+#define PINMUX_GPIO125__FUNC_DBG_MON_A15 (MTK_PIN_NO(125) | 7)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_MSDC0_DAT4 (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_ANT_SEL5 (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(126) | 6)
+#define PINMUX_GPIO126__FUNC_DBG_MON_A16 (MTK_PIN_NO(126) | 7)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_MSDC0_DAT6 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_ANT_SEL4 (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(127) | 6)
+#define PINMUX_GPIO127__FUNC_DBG_MON_A17 (MTK_PIN_NO(127) | 7)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_MSDC0_DAT1 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_ANT_SEL2 (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(128) | 6)
+#define PINMUX_GPIO128__FUNC_DBG_MON_A18 (MTK_PIN_NO(128) | 7)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_MSDC0_DAT5 (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_ANT_SEL3 (MTK_PIN_NO(129) | 3)
+#define PINMUX_GPIO129__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(129) | 6)
+#define PINMUX_GPIO129__FUNC_DBG_MON_A23 (MTK_PIN_NO(129) | 7)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_MSDC0_DAT7 (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_MRG_DO (MTK_PIN_NO(130) | 3)
+#define PINMUX_GPIO130__FUNC_DBG_MON_A24 (MTK_PIN_NO(130) | 7)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_MSDC0_DSL (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_MRG_SYNC (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_DBG_MON_A25 (MTK_PIN_NO(131) | 7)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_MSDC0_DAT3 (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_MRG_DI (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_DBG_MON_A26 (MTK_PIN_NO(132) | 7)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_MSDC0_RSTB (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_AGPS_SYNC (MTK_PIN_NO(133) | 3)
+#define PINMUX_GPIO133__FUNC_DBG_MON_A27 (MTK_PIN_NO(133) | 7)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_RTC32K_CK (MTK_PIN_NO(134) | 1)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_WATCHDOG (MTK_PIN_NO(135) | 1)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(136) | 1)
+#define PINMUX_GPIO136__FUNC_AUD_CLK_MISO (MTK_PIN_NO(136) | 2)
+#define PINMUX_GPIO136__FUNC_I2S1_MCK (MTK_PIN_NO(136) | 3)
+#define PINMUX_GPIO136__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(136) | 6)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(137) | 1)
+#define PINMUX_GPIO137__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(137) | 2)
+#define PINMUX_GPIO137__FUNC_I2S1_BCK (MTK_PIN_NO(137) | 3)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_I2S1_LRCK (MTK_PIN_NO(138) | 3)
+#define PINMUX_GPIO138__FUNC_DBG_MON_B24 (MTK_PIN_NO(138) | 7)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(139) | 1)
+#define PINMUX_GPIO139__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(139) | 2)
+#define PINMUX_GPIO139__FUNC_I2S1_DO (MTK_PIN_NO(139) | 3)
+#define PINMUX_GPIO139__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(139) | 6)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_AUD_CLK_MISO (MTK_PIN_NO(140) | 1)
+#define PINMUX_GPIO140__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(140) | 2)
+#define PINMUX_GPIO140__FUNC_I2S0_MCK (MTK_PIN_NO(140) | 3)
+#define PINMUX_GPIO140__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(140) | 6)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(141) | 1)
+#define PINMUX_GPIO141__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(141) | 2)
+#define PINMUX_GPIO141__FUNC_I2S0_BCK (MTK_PIN_NO(141) | 3)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(142) | 1)
+#define PINMUX_GPIO142__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(142) | 2)
+#define PINMUX_GPIO142__FUNC_I2S0_LRCK (MTK_PIN_NO(142) | 3)
+#define PINMUX_GPIO142__FUNC_VOW_DAT_MISO (MTK_PIN_NO(142) | 4)
+#define PINMUX_GPIO142__FUNC_DBG_MON_B25 (MTK_PIN_NO(142) | 7)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_I2S0_DI (MTK_PIN_NO(143) | 3)
+#define PINMUX_GPIO143__FUNC_VOW_CLK_MISO (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(143) | 6)
+#define PINMUX_GPIO143__FUNC_DBG_MON_B26 (MTK_PIN_NO(143) | 7)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(144) | 2)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(145) | 1)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(146) | 2)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(147) | 1)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_SRCLKENA0 (MTK_PIN_NO(148) | 1)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_SRCLKENA1 (MTK_PIN_NO(149) | 1)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_PWM_A (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_CMFLASH (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_CLKM0 (MTK_PIN_NO(150) | 3)
+#define PINMUX_GPIO150__FUNC_DBG_MON_B30 (MTK_PIN_NO(150) | 7)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_PWM_B (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_CMVREF0 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_CLKM1 (MTK_PIN_NO(151) | 3)
+#define PINMUX_GPIO151__FUNC_DBG_MON_B20 (MTK_PIN_NO(151) | 7)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_PWM_C (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_CMFLASH (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_CLKM2 (MTK_PIN_NO(152) | 3)
+#define PINMUX_GPIO152__FUNC_DBG_MON_B21 (MTK_PIN_NO(152) | 7)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_PWM_A (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_CMVREF0 (MTK_PIN_NO(153) | 2)
+#define PINMUX_GPIO153__FUNC_CLKM3 (MTK_PIN_NO(153) | 3)
+#define PINMUX_GPIO153__FUNC_DBG_MON_B22 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(154) | 2)
+#define PINMUX_GPIO154__FUNC_DBG_MON_B18 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_ANT_SEL0 (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(155) | 2)
+#define PINMUX_GPIO155__FUNC_CMVREF1 (MTK_PIN_NO(155) | 3)
+#define PINMUX_GPIO155__FUNC_SCP_JTAG_TDI (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_ANT_SEL1 (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_SRCLKENAI0 (MTK_PIN_NO(156) | 2)
+#define PINMUX_GPIO156__FUNC_SCL6 (MTK_PIN_NO(156) | 3)
+#define PINMUX_GPIO156__FUNC_KPCOL2 (MTK_PIN_NO(156) | 4)
+#define PINMUX_GPIO156__FUNC_IDDIG (MTK_PIN_NO(156) | 5)
+#define PINMUX_GPIO156__FUNC_SCP_JTAG_TCK (MTK_PIN_NO(156) | 7)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_ANT_SEL2 (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_SRCLKENAI1 (MTK_PIN_NO(157) | 2)
+#define PINMUX_GPIO157__FUNC_SDA6 (MTK_PIN_NO(157) | 3)
+#define PINMUX_GPIO157__FUNC_KPROW2 (MTK_PIN_NO(157) | 4)
+#define PINMUX_GPIO157__FUNC_USB_DRVVBUS (MTK_PIN_NO(157) | 5)
+#define PINMUX_GPIO157__FUNC_SCP_JTAG_TRSTN (MTK_PIN_NO(157) | 7)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_ANT_SEL3 (MTK_PIN_NO(158) | 1)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_ANT_SEL4 (MTK_PIN_NO(159) | 1)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_ANT_SEL5 (MTK_PIN_NO(160) | 1)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_SPI1_A_MI (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_SCP_SPI1_MI (MTK_PIN_NO(161) | 2)
+#define PINMUX_GPIO161__FUNC_IDDIG (MTK_PIN_NO(161) | 3)
+#define PINMUX_GPIO161__FUNC_ANT_SEL6 (MTK_PIN_NO(161) | 4)
+#define PINMUX_GPIO161__FUNC_KPCOL2 (MTK_PIN_NO(161) | 5)
+#define PINMUX_GPIO161__FUNC_PTA_RXD (MTK_PIN_NO(161) | 6)
+#define PINMUX_GPIO161__FUNC_DBG_MON_B19 (MTK_PIN_NO(161) | 7)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_SPI1_A_CSB (MTK_PIN_NO(162) | 1)
+#define PINMUX_GPIO162__FUNC_SCP_SPI1_CS (MTK_PIN_NO(162) | 2)
+#define PINMUX_GPIO162__FUNC_USB_DRVVBUS (MTK_PIN_NO(162) | 3)
+#define PINMUX_GPIO162__FUNC_ANT_SEL5 (MTK_PIN_NO(162) | 4)
+#define PINMUX_GPIO162__FUNC_KPROW2 (MTK_PIN_NO(162) | 5)
+#define PINMUX_GPIO162__FUNC_PTA_TXD (MTK_PIN_NO(162) | 6)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_SPI1_A_MO (MTK_PIN_NO(163) | 1)
+#define PINMUX_GPIO163__FUNC_SCP_SPI1_MO (MTK_PIN_NO(163) | 2)
+#define PINMUX_GPIO163__FUNC_SDA1 (MTK_PIN_NO(163) | 3)
+#define PINMUX_GPIO163__FUNC_ANT_SEL4 (MTK_PIN_NO(163) | 4)
+#define PINMUX_GPIO163__FUNC_CMMCLK2 (MTK_PIN_NO(163) | 5)
+#define PINMUX_GPIO163__FUNC_DMIC_CLK (MTK_PIN_NO(163) | 6)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_SPI1_A_CLK (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_SCP_SPI1_CK (MTK_PIN_NO(164) | 2)
+#define PINMUX_GPIO164__FUNC_SCL1 (MTK_PIN_NO(164) | 3)
+#define PINMUX_GPIO164__FUNC_ANT_SEL3 (MTK_PIN_NO(164) | 4)
+#define PINMUX_GPIO164__FUNC_CMMCLK3 (MTK_PIN_NO(164) | 5)
+#define PINMUX_GPIO164__FUNC_DMIC_DAT (MTK_PIN_NO(164) | 6)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_PWM_B (MTK_PIN_NO(165) | 1)
+#define PINMUX_GPIO165__FUNC_CMMCLK2 (MTK_PIN_NO(165) | 2)
+#define PINMUX_GPIO165__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(165) | 3)
+#define PINMUX_GPIO165__FUNC_TDM_MCK_2ND (MTK_PIN_NO(165) | 6)
+#define PINMUX_GPIO165__FUNC_SCP_JTAG_TDO (MTK_PIN_NO(165) | 7)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_ANT_SEL6 (MTK_PIN_NO(166) | 1)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_RFIC0_BSI_EN (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_SPM_BSI_EN (MTK_PIN_NO(167) | 2)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_RFIC0_BSI_CK (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_SPM_BSI_CK (MTK_PIN_NO(168) | 2)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_PWM_C (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_CMMCLK3 (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_CMVREF1 (MTK_PIN_NO(169) | 3)
+#define PINMUX_GPIO169__FUNC_ANT_SEL7 (MTK_PIN_NO(169) | 4)
+#define PINMUX_GPIO169__FUNC_AGPS_SYNC (MTK_PIN_NO(169) | 5)
+#define PINMUX_GPIO169__FUNC_TDM_BCK_2ND (MTK_PIN_NO(169) | 6)
+#define PINMUX_GPIO169__FUNC_SCP_JTAG_TMS (MTK_PIN_NO(169) | 7)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_I2S1_BCK (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_I2S3_BCK (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_SCL7 (MTK_PIN_NO(170) | 3)
+#define PINMUX_GPIO170__FUNC_I2S5_BCK (MTK_PIN_NO(170) | 4)
+#define PINMUX_GPIO170__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(170) | 5)
+#define PINMUX_GPIO170__FUNC_TDM_LRCK_2ND (MTK_PIN_NO(170) | 6)
+#define PINMUX_GPIO170__FUNC_ANT_SEL3 (MTK_PIN_NO(170) | 7)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_I2S1_LRCK (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_I2S3_LRCK (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_SDA7 (MTK_PIN_NO(171) | 3)
+#define PINMUX_GPIO171__FUNC_I2S5_LRCK (MTK_PIN_NO(171) | 4)
+#define PINMUX_GPIO171__FUNC_URXD1 (MTK_PIN_NO(171) | 5)
+#define PINMUX_GPIO171__FUNC_TDM_DATA0_2ND (MTK_PIN_NO(171) | 6)
+#define PINMUX_GPIO171__FUNC_ANT_SEL4 (MTK_PIN_NO(171) | 7)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_I2S1_DO (MTK_PIN_NO(172) | 1)
+#define PINMUX_GPIO172__FUNC_I2S3_DO (MTK_PIN_NO(172) | 2)
+#define PINMUX_GPIO172__FUNC_SCL8 (MTK_PIN_NO(172) | 3)
+#define PINMUX_GPIO172__FUNC_I2S5_DO (MTK_PIN_NO(172) | 4)
+#define PINMUX_GPIO172__FUNC_UTXD1 (MTK_PIN_NO(172) | 5)
+#define PINMUX_GPIO172__FUNC_TDM_DATA1_2ND (MTK_PIN_NO(172) | 6)
+#define PINMUX_GPIO172__FUNC_ANT_SEL5 (MTK_PIN_NO(172) | 7)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_I2S1_MCK (MTK_PIN_NO(173) | 1)
+#define PINMUX_GPIO173__FUNC_I2S3_MCK (MTK_PIN_NO(173) | 2)
+#define PINMUX_GPIO173__FUNC_SDA8 (MTK_PIN_NO(173) | 3)
+#define PINMUX_GPIO173__FUNC_I2S5_MCK (MTK_PIN_NO(173) | 4)
+#define PINMUX_GPIO173__FUNC_UCTS0 (MTK_PIN_NO(173) | 5)
+#define PINMUX_GPIO173__FUNC_TDM_DATA2_2ND (MTK_PIN_NO(173) | 6)
+#define PINMUX_GPIO173__FUNC_ANT_SEL6 (MTK_PIN_NO(173) | 7)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_I2S2_DI (MTK_PIN_NO(174) | 1)
+#define PINMUX_GPIO174__FUNC_I2S0_DI (MTK_PIN_NO(174) | 2)
+#define PINMUX_GPIO174__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(174) | 3)
+#define PINMUX_GPIO174__FUNC_I2S2_DI2 (MTK_PIN_NO(174) | 4)
+#define PINMUX_GPIO174__FUNC_URTS0 (MTK_PIN_NO(174) | 5)
+#define PINMUX_GPIO174__FUNC_TDM_DATA3_2ND (MTK_PIN_NO(174) | 6)
+#define PINMUX_GPIO174__FUNC_ANT_SEL7 (MTK_PIN_NO(174) | 7)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_ANT_SEL7 (MTK_PIN_NO(175) | 1)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+
+#endif /* __MT8183-PINFUNC_H */
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 6b8ab5568481..bcd018c3162b 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 31457f32e4d0..75ee6cf1e1b4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -58,6 +58,93 @@
status = "okay";
};
+ padctl@3520000 {
+ status = "okay";
+
+ avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
+ avdd-usb-supply = <&vdd_3v3_sys>;
+ dvdd-pex-supply = <&vdd_pex>;
+ dvdd-pex-pll-supply = <&vdd_pex>;
+ hvdd-pex-supply = <&vdd_1v8>;
+ hvdd-pex-pll-supply = <&vdd_1v8>;
+ vclamp-usb-supply = <&vdd_1v8>;
+ vddio-hsic-supply = <&gnd>;
+
+ pads {
+ usb2 {
+ status = "okay";
+
+ lanes {
+ usb2-0 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-1 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-2 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ status = "okay";
+
+ lanes {
+ usb3-0 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb3-1 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb3-2 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ status = "okay";
+ mode = "otg";
+
+ vbus-supply = <&vdd_usb0>;
+ };
+
+ usb2-1 {
+ status = "okay";
+ mode = "host";
+
+ vbus-supply = <&vdd_usb1>;
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3530000 {
+ status = "okay";
+
+ phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+ <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>;
+ phy-names = "usb2-0", "usb2-1", "usb3-0";
+ };
+
pcie@10003000 {
status = "okay";
@@ -182,5 +269,33 @@
vin-supply = <&vdd_5v0_sys>;
};
+
+ vdd_usb0: regulator@102 {
+ compatible = "regulator-fixed";
+ reg = <102>;
+
+ regulator-name = "VDD_USB0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio TEGRA_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_usb1: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
+
+ regulator-name = "VDD_USB1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio TEGRA_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_5v0_sys>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 89a2da46efae..64686b033c38 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -268,43 +268,30 @@
regulator-name = "AVDD_DSI_CSI_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_1v8: sd2 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_3v3_sys: sd3 {
regulator-name = "VDD_3V3_SYS";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
- ldo0 {
+ vdd_1v8_pll: ldo0 {
regulator-name = "VDD_1V8_AP_PLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
ldo2 {
regulator-name = "VDDIO_3V3_AOHV";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
regulator-always-on;
regulator-boot-on;
};
@@ -331,18 +318,12 @@
regulator-name = "VDD_HDMI_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_pex: ldo8 {
regulator-name = "VDD_PEX_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
};
};
@@ -360,10 +341,21 @@
#address-cells = <1>;
#size-cells = <0>;
- vdd_5v0_sys: regulator@0 {
+ gnd: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
+ regulator-name = "GND";
+ regulator-min-microvolt = <0>;
+ regulator-max-microvolt = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_5v0_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+
regulator-name = "VDD_5V0_SYS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -371,18 +363,14 @@
regulator-boot-on;
};
- vdd_1v8_ap: regulator@1 {
+ vdd_1v8_ap: regulator@2 {
compatible = "regulator-fixed";
- reg = <1>;
+ reg = <2>;
regulator-name = "VDD_1V8_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
-
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 97aeb946ed5e..f0bb6ced4976 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -317,10 +317,11 @@
nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
- nvidia,default-tap = <0x5>;
- nvidia,default-trim = <0x9>;
+ nvidia,default-tap = <0x9>;
+ nvidia,default-trim = <0x5>;
nvidia,dqs-trim = <63>;
mmc-hs400-1_8v;
+ supports-cqe;
status = "disabled";
};
@@ -340,6 +341,141 @@
status = "disabled";
};
+ padctl: padctl@3520000 {
+ compatible = "nvidia,tegra186-xusb-padctl";
+ reg = <0x0 0x03520000 0x0 0x1000>,
+ <0x0 0x03540000 0x0 0x1000>;
+ reg-names = "padctl", "ao";
+
+ resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>;
+ reset-names = "padctl";
+
+ status = "disabled";
+
+ pads {
+ usb2 {
+ clocks = <&bpmp TEGRA186_CLK_USB2_TRK>;
+ clock-names = "trk";
+ status = "disabled";
+
+ lanes {
+ usb2-0 {
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb2-1 {
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb2-2 {
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ hsic {
+ clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>;
+ clock-names = "trk";
+ status = "disabled";
+
+ lanes {
+ hsic-0 {
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ usb3 {
+ status = "disabled";
+
+ lanes {
+ usb3-0 {
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb3-1 {
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb3-2 {
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ status = "disabled";
+ };
+
+ usb2-1 {
+ status = "disabled";
+ };
+
+ usb2-2 {
+ status = "disabled";
+ };
+
+ hsic-0 {
+ status = "disabled";
+ };
+
+ usb3-0 {
+ status = "disabled";
+ };
+
+ usb3-1 {
+ status = "disabled";
+ };
+
+ usb3-2 {
+ status = "disabled";
+ };
+ };
+ };
+
+ usb@3530000 {
+ compatible = "nvidia,tegra186-xusb";
+ reg = <0x0 0x03530000 0x0 0x8000>,
+ <0x0 0x03538000 0x0 0x1000>;
+ reg-names = "hcd", "fpci";
+
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
+ <&bpmp TEGRA186_CLK_XUSB_FALCON>,
+ <&bpmp TEGRA186_CLK_XUSB_SS>,
+ <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+ <&bpmp TEGRA186_CLK_CLK_M>,
+ <&bpmp TEGRA186_CLK_XUSB_FS>,
+ <&bpmp TEGRA186_CLK_PLLU>,
+ <&bpmp TEGRA186_CLK_CLK_M>,
+ <&bpmp TEGRA186_CLK_PLLE>;
+ clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
+ "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
+ "pll_u_480m", "clk_m", "pll_e";
+
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
+ <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+ power-domain-names = "xusb_host", "xusb_ss";
+ nvidia,xusb-padctl = <&padctl>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
fuse@3820000 {
compatible = "nvidia,tegra186-efuse";
reg = <0x0 0x03820000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 246c1ebbd055..0fd5bd29fbf9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -256,6 +256,7 @@
interrupt-parent = <&gpio>;
interrupts = <TEGRA194_MAIN_GPIO(H, 2)
IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <&vdd_1v8ls>;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index b62e96945846..73801b48d1d8 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -57,8 +57,6 @@
pwms = <&pwm4 0 45334>;
cooling-levels = <0 64 128 255>;
- cooling-min-state = <0>;
- cooling-max-state = <3>;
#cooling-cells = <2>;
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 053458a5db55..4dcd0d36189a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -305,6 +305,12 @@
cpu@3 {
enable-method = "psci";
};
+
+ idle-states {
+ cpu-sleep {
+ status = "okay";
+ };
+ };
};
psci {
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index 9fad0d27278e..5a57396b5948 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -99,4 +99,16 @@
pinctrl-0 = <&dvfs_pwm_active_state>;
pinctrl-1 = <&dvfs_pwm_inactive_state>;
};
+
+ aconnect@702c0000 {
+ status = "okay";
+
+ dma@702e2000 {
+ status = "okay";
+ };
+
+ agic@702f9000 {
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 95e890d8a119..a7dc319214a4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1352,6 +1352,11 @@
padctl@7009f000 {
status = "okay";
+ avdd-pll-utmip-supply = <&vdd_1v8>;
+ avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
+ dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+ hvdd-pex-pll-e-supply = <&vdd_1v8>;
+
pads {
usb2 {
status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
index 3ddf173ccc18..88a4b9333d84 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -1629,6 +1629,12 @@
cpu@3 {
enable-method = "psci";
};
+
+ idle-states {
+ cpu-sleep {
+ status = "okay";
+ };
+ };
};
psci {
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
new file mode 100644
index 000000000000..5d0181908f45
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/mfd/max77620.h>
+
+#include "tegra210.dtsi"
+
+/ {
+ model = "NVIDIA Jetson Nano Developer Kit";
+ compatible = "nvidia,p3450-0000", "nvidia,tegra210";
+
+ aliases {
+ ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0";
+ rtc0 = "/i2c@7000d000/pmic@3c";
+ rtc1 = "/rtc@7000e000";
+ serial0 = &uarta;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x1 0x0>;
+ };
+
+ pcie@1003000 {
+ status = "okay";
+
+ avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+ hvddio-pex-supply = <&vdd_1v8>;
+ dvddio-pex-supply = <&vdd_pex_1v05>;
+ dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+ hvdd-pex-pll-e-supply = <&vdd_1v8>;
+ vddio-pex-ctl-supply = <&vdd_1v8>;
+
+ pci@1,0 {
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+ phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+ nvidia,num-lanes = <4>;
+ status = "okay";
+ };
+
+ pci@2,0 {
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
+ phy-names = "pcie-0";
+ status = "okay";
+
+ ethernet@0,0 {
+ reg = <0x000000 0 0 0 0>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+ };
+
+ host1x@50000000 {
+ dpaux@54040000 {
+ status = "okay";
+ };
+
+ sor@54580000 {
+ status = "okay";
+
+ avdd-io-supply = <&avdd_1v05>;
+ vdd-pll-supply = <&vdd_1v8>;
+ hdmi-supply = <&vdd_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1)
+ GPIO_ACTIVE_LOW>;
+ nvidia,xbar-cfg = <0 1 2 3 4>;
+ };
+ };
+
+ gpu@57000000 {
+ vdd-supply = <&vdd_gpu>;
+ status = "okay";
+ };
+
+ /* debug port */
+ serial@70006000 {
+ status = "okay";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: pmic@3c {
+ compatible = "maxim,max77620";
+ reg = <0x3c>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77620_default>;
+
+ max77620_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "fps-out";
+ drive-push-pull = <1>;
+ maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+ maxim,active-fps-power-up-slot = <0>;
+ maxim,active-fps-power-down-slot = <7>;
+ };
+
+ gpio2 {
+ pins = "gpio2";
+ function = "fps-out";
+ drive-open-drain = <1>;
+ maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+ maxim,active-fps-power-up-slot = <0>;
+ maxim,active-fps-power-down-slot = <7>;
+ };
+
+ gpio3 {
+ pins = "gpio3";
+ function = "fps-out";
+ drive-open-drain = <1>;
+ maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+ maxim,active-fps-power-up-slot = <4>;
+ maxim,active-fps-power-down-slot = <3>;
+ };
+
+ gpio4 {
+ pins = "gpio4";
+ function = "32k-out1";
+ };
+
+ gpio5_6_7 {
+ pins = "gpio5", "gpio6", "gpio7";
+ function = "gpio";
+ drive-push-pull = <1>;
+ };
+ };
+
+ fps {
+ fps0 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,suspend-fps-time-period-us = <5120>;
+ };
+
+ fps1 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+ maxim,suspend-fps-time-period-us = <5120>;
+ };
+
+ fps2 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ };
+ };
+
+ regulators {
+ in-ldo0-1-supply = <&vdd_pre>;
+ in-ldo2-supply = <&vdd_3v3_sys>;
+ in-ldo3-5-supply = <&vdd_1v8>;
+ in-ldo4-6-supply = <&vdd_5v0_sys>;
+ in-ldo7-8-supply = <&vdd_pre>;
+ in-sd0-supply = <&vdd_5v0_sys>;
+ in-sd1-supply = <&vdd_5v0_sys>;
+ in-sd2-supply = <&vdd_5v0_sys>;
+ in-sd3-supply = <&vdd_5v0_sys>;
+
+ vdd_soc: sd0 {
+ regulator-name = "VDD_SOC";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1170000>;
+ regulator-enable-ramp-delay = <146>;
+ regulator-disable-ramp-delay = <4080>;
+ regulator-ramp-delay = <27500>;
+ regulator-ramp-delay-scale = <300>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+ maxim,active-fps-power-up-slot = <1>;
+ maxim,active-fps-power-down-slot = <6>;
+ };
+
+ vdd_ddr: sd1 {
+ regulator-name = "VDD_DDR_1V1_PMIC";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-enable-ramp-delay = <176>;
+ regulator-disable-ramp-delay = <145800>;
+ regulator-ramp-delay = <27500>;
+ regulator-ramp-delay-scale = <300>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+ maxim,active-fps-power-up-slot = <5>;
+ maxim,active-fps-power-down-slot = <2>;
+ };
+
+ vdd_pre: sd2 {
+ regulator-name = "VDD_PRE_REG_1V35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-enable-ramp-delay = <176>;
+ regulator-disable-ramp-delay = <32000>;
+ regulator-ramp-delay = <27500>;
+ regulator-ramp-delay-scale = <350>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+ maxim,active-fps-power-up-slot = <2>;
+ maxim,active-fps-power-down-slot = <5>;
+ };
+
+ vdd_1v8: sd3 {
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <242>;
+ regulator-disable-ramp-delay = <118000>;
+ regulator-ramp-delay = <27500>;
+ regulator-ramp-delay-scale = <360>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+ maxim,active-fps-power-up-slot = <3>;
+ maxim,active-fps-power-down-slot = <4>;
+ };
+
+ vdd_sys_1v2: ldo0 {
+ regulator-name = "AVDD_SYS_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <26>;
+ regulator-disable-ramp-delay = <626>;
+ regulator-ramp-delay = <100000>;
+ regulator-ramp-delay-scale = <200>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+ maxim,active-fps-power-up-slot = <0>;
+ maxim,active-fps-power-down-slot = <7>;
+ };
+
+ vdd_pex_1v05: ldo1 {
+ regulator-name = "VDD_PEX_1V05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <22>;
+ regulator-disable-ramp-delay = <650>;
+ regulator-ramp-delay = <100000>;
+ regulator-ramp-delay-scale = <200>;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+ maxim,active-fps-power-up-slot = <0>;
+ maxim,active-fps-power-down-slot = <7>;
+ };
+
+ vddio_sdmmc: ldo2 {
+ regulator-name = "VDDIO_SDMMC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <62>;
+ regulator-disable-ramp-delay = <650>;
+ regulator-ramp-delay = <100000>;
+ regulator-ramp-delay-scale = <200>;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+ maxim,active-fps-power-up-slot = <0>;
+ maxim,active-fps-power-down-slot = <7>;
+ };
+
+ ldo3 {
+ status = "disabled";
+ };
+
+ vdd_rtc: ldo4 {
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-enable-ramp-delay = <22>;
+ regulator-disable-ramp-delay = <610>;
+ regulator-ramp-delay = <100000>;
+ regulator-ramp-delay-scale = <200>;
+ regulator-disable-active-discharge;
+ regulator-always-on;
+ regulator-boot-on;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+ maxim,active-fps-power-up-slot = <1>;
+ maxim,active-fps-power-down-slot = <6>;
+ };
+
+ ldo5 {
+ status = "disabled";
+ };
+
+ ldo6 {
+ status = "disabled";
+ };
+
+ avdd_1v05_pll: ldo7 {
+ regulator-name = "AVDD_1V05_PLL";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <24>;
+ regulator-disable-ramp-delay = <2768>;
+ regulator-ramp-delay = <100000>;
+ regulator-ramp-delay-scale = <200>;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+ maxim,active-fps-power-up-slot = <3>;
+ maxim,active-fps-power-down-slot = <4>;
+ };
+
+ avdd_1v05: ldo8 {
+ regulator-name = "AVDD_SATA_HDMI_DP_1V05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <22>;
+ regulator-disable-ramp-delay = <1160>;
+ regulator-ramp-delay = <100000>;
+ regulator-ramp-delay-scale = <200>;
+
+ maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+ maxim,active-fps-power-up-slot = <6>;
+ maxim,active-fps-power-down-slot = <1>;
+ };
+ };
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ };
+
+ hda@70030000 {
+ nvidia,model = "jetson-nano-hda";
+
+ status = "okay";
+ };
+
+ usb@70090000 {
+ phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
+
+ avdd-usb-supply = <&vdd_3v3_sys>;
+ dvddio-pex-supply = <&vdd_pex_1v05>;
+ hvddio-pex-supply = <&vdd_1v8>;
+ /* these really belong to the XUSB pad controller */
+ avdd-pll-utmip-supply = <&vdd_1v8>;
+ avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+ dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
+ hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
+
+ status = "okay";
+ };
+
+ padctl@7009f000 {
+ status = "okay";
+
+ avdd-pll-utmip-supply = <&vdd_1v8>;
+ avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+ dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+ hvdd-pex-pll-e-supply = <&vdd_1v8>;
+
+ pads {
+ usb2 {
+ status = "okay";
+
+ lanes {
+ usb2-0 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-1 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-2 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+ };
+ };
+
+ pcie {
+ status = "okay";
+
+ lanes {
+ pcie-0 {
+ nvidia,function = "pcie-x1";
+ status = "okay";
+ };
+
+ pcie-1 {
+ nvidia,function = "pcie-x4";
+ status = "okay";
+ };
+
+ pcie-2 {
+ nvidia,function = "pcie-x4";
+ status = "okay";
+ };
+
+ pcie-3 {
+ nvidia,function = "pcie-x4";
+ status = "okay";
+ };
+
+ pcie-4 {
+ nvidia,function = "pcie-x4";
+ status = "okay";
+ };
+
+ pcie-5 {
+ nvidia,function = "usb3-ss";
+ status = "okay";
+ };
+
+ pcie-6 {
+ nvidia,function = "usb3-ss";
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ status = "okay";
+ mode = "otg";
+ };
+
+ usb2-1 {
+ status = "okay";
+ mode = "host";
+ };
+
+ usb2-2 {
+ status = "okay";
+ mode = "host";
+ };
+
+ usb3-0 {
+ status = "okay";
+ nvidia,usb2-companion = <1>;
+ vbus-supply = <&vdd_hub_3v3>;
+ };
+ };
+ };
+
+ sdhci@700b0000 {
+ status = "okay";
+ bus-width = <4>;
+
+ cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+
+ vqmmc-supply = <&vddio_sdmmc>;
+ vmmc-supply = <&vdd_3v3_sd>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ cpus {
+ cpu@0 {
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ enable-method = "psci";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <30>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ force-recovery {
+ label = "Force Recovery";
+ gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_1>;
+ debounce-interval = <30>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_sys: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+
+ regulator-name = "VDD_5V0_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "VDD_3V3_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-disable-ramp-delay = <11340>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_3v3_sd: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+
+ regulator-name = "VDD_3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_hdmi: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+
+ regulator-name = "VDD_HDMI_5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_hub_3v3: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+
+ regulator-name = "VDD_HUB_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_cpu: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+
+ regulator-name = "VDD_CPU";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_gpu: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+
+ regulator-name = "VDD_GPU";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-enable-ramp-delay = <250>;
+
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_5v0_sys>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index a4b8f668a6d4..72c7a04ac1df 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1654,6 +1654,11 @@
padctl@7009f000 {
status = "okay";
+ avdd-pll-utmip-supply = <&pp1800>;
+ avdd-pll-uerefe-supply = <&pp1050_avdd>;
+ dvdd-pex-pll-supply = <&avddio_1v05>;
+ hvdd-pex-pll-e-supply = <&pp1800>;
+
pads {
usb2 {
status = "okay";
@@ -1751,6 +1756,13 @@
cpu@3 {
enable-method = "psci";
};
+
+ idle-states {
+ cpu-sleep {
+ arm,psci-suspend-param = <0x00010007>;
+ status = "okay";
+ };
+ };
};
gpio-keys {
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 6574396d2257..a550c0a4d572 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -384,14 +384,22 @@
};
timer@60005000 {
- compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer";
+ compatible = "nvidia,tegra210-timer";
reg = <0x0 0x60005000 0x0 0x400>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_TIMER>;
clock-names = "timer";
};
@@ -1363,24 +1371,51 @@
<&dfll>;
clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
clock-latency = <300000>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ next-level-cache = <&L2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <1>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ next-level-cache = <&L2>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <2>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ next-level-cache = <&L2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <3>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ next-level-cache = <&L2>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x40000007>;
+ entry-latency-us = <100>;
+ exit-latency-us = <30>;
+ min-residency-us = <1000>;
+ wakeup-latency-us = <130>;
+ idle-state-name = "cpu-sleep";
+ status = "disabled";
+ };
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
};
};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
index 6a573875d45a..1c0d06f59d00 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
@@ -62,4 +62,56 @@
bias-disable;
};
};
+
+ hdmi_hpd_active: hdmi_hpd_active {
+ mux {
+ pins = "gpio34";
+ function = "hdmi_hot";
+ };
+
+ config {
+ pins = "gpio34";
+ bias-pull-down;
+ drive-strength = <16>;
+ };
+ };
+
+ hdmi_hpd_suspend: hdmi_hpd_suspend {
+ mux {
+ pins = "gpio34";
+ function = "hdmi_hot";
+ };
+
+ config {
+ pins = "gpio34";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+ };
+
+ hdmi_ddc_active: hdmi_ddc_active {
+ mux {
+ pins = "gpio32", "gpio33";
+ function = "hdmi_ddc";
+ };
+
+ config {
+ pins = "gpio32", "gpio33";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ hdmi_ddc_suspend: hdmi_ddc_suspend {
+ mux {
+ pins = "gpio32", "gpio33";
+ function = "hdmi_ddc";
+ };
+
+ config {
+ pins = "gpio32", "gpio33";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
index a6ad3d7fe655..31a3e3311ad5 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
@@ -36,6 +36,14 @@
};
};
+ audio_mclk: clk_div1 {
+ pinconf {
+ pins = "gpio15";
+ function = "func1";
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
+
volume_up_gpio: pm8996_gpio2 {
pinconf {
pins = "gpio2";
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 6d50449fbcdf..943f69912074 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -18,6 +18,8 @@
#include "apq8096-db820c-pmic-pins.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
@@ -63,6 +65,7 @@
};
clocks {
+ compatible = "simple-bus";
divclk4: divclk4 {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -72,6 +75,15 @@
pinctrl-names = "default";
pinctrl-0 = <&divclk4_pin_a>;
};
+
+ div1_mclk: divclk1 {
+ compatible = "gpio-gate-clock";
+ pinctrl-0 = <&audio_mclk>;
+ pinctrl-names = "default";
+ clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+ #clock-cells = <0>;
+ enable-gpios = <&pm8994_gpios 15 0>;
+ };
};
soc {
@@ -452,6 +464,43 @@
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
};
};
+
+ slim_msm: slim@91c0000 {
+ ngd@1 {
+ wcd9335: codec@1{
+ clock-names = "mclk", "slimbus";
+ clocks = <&div1_mclk>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+ };
+ };
+ };
+
+ mdss@900000 {
+ status = "okay";
+
+ mdp@901000 {
+ status = "okay";
+ };
+
+ hdmi-phy@9a0600 {
+ status = "okay";
+
+ vddio-supply = <&pm8994_l12>;
+ vcca-supply = <&pm8994_l28>;
+ #phy-cells = <0>;
+ };
+
+ hdmi-tx@9a0000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+ pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+ core-vdda-supply = <&pm8994_l12>;
+ core-vcc-supply = <&pm8994_s4>;
+ };
+ };
};
@@ -639,3 +688,75 @@
};
};
};
+
+&sound {
+ compatible = "qcom,apq8096-sndcard";
+ model = "DB820c";
+ audio-routing = "RX_BIAS", "MCLK";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ hdmi-dai-link {
+ link-name = "HDMI";
+ cpu {
+ sound-dai = <&q6afedai HDMI_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&hdmi 0>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_6_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 6>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 1>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0803ca8c02da..423dda996b5d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -180,19 +180,19 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0_1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 4>;
trips {
- cpu_alert0: trip0 {
+ cpu0_1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -201,7 +201,7 @@
cooling-maps {
map0 {
- trip = <&cpu_alert0>;
+ trip = <&cpu0_1_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -210,19 +210,19 @@
};
};
- cpu-thermal1 {
+ cpu2_3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 3>;
trips {
- cpu_alert1: trip0 {
+ cpu2_3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu2_3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -231,7 +231,7 @@
cooling-maps {
map0 {
- trip = <&cpu_alert1>;
+ trip = <&cpu2_3_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -247,12 +247,12 @@
thermal-sensors = <&tsens 2>;
trips {
- gpu_alert: trip0 {
+ gpu_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- gpu_crit: trip1 {
+ gpu_crit: gpu_crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@@ -267,18 +267,27 @@
thermal-sensors = <&tsens 1>;
trips {
- cam_alert: trip0 {
+ cam_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
- type = "passive";
+ type = "hot";
};
- cam_crit: trip1 {
- temperature = <95000>;
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <85000>;
hysteresis = <2000>;
- type = "critical";
+ type = "hot";
};
};
-
};
};
@@ -1015,8 +1024,9 @@
#clock-cells = <1>;
#phy-cells = <0>;
- clocks = <&gcc GCC_MDSS_AHB_CLK>;
- clock-names = "iface";
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "ref";
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
index 131878db9852..fba2229b6236 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
@@ -13,6 +13,49 @@
&msmgpio {
+ wcd9xxx_intr {
+ wcd_intr_default: wcd_intr_default{
+ mux {
+ pins = "gpio54";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio54";
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down; /* pull down */
+ input-enable;
+ };
+ };
+ };
+
+ cdc_reset_ctrl {
+ cdc_reset_sleep: cdc_reset_sleep {
+ mux {
+ pins = "gpio64";
+ function = "gpio";
+ };
+ config {
+ pins = "gpio64";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+ };
+ cdc_reset_active:cdc_reset_active {
+ mux {
+ pins = "gpio64";
+ function = "gpio";
+ };
+ config {
+ pins = "gpio64";
+ drive-strength = <16>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+ };
+
blsp1_spi0_default: blsp1_spi0_default {
pinmux {
function = "blsp_spi1";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c761269caf80..c4e7fde9d88e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/soc/qcom,apr.h>
/ {
interrupt-parent = <&intc>;
@@ -84,6 +85,12 @@
qcom,client-id = <1>;
qcom,vmid = <15>;
};
+
+ zap_shader_region: gpu@8f200000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x90b00000 0x0 0xa00000>;
+ no-map;
+ };
};
cpus {
@@ -154,20 +161,20 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu0_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -175,20 +182,20 @@
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -196,20 +203,20 @@
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu2_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -217,26 +224,176 @@
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit3: trip1 {
+ cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ m4m-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ m4m_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ l3-or-venus-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ l3_or_venus_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster0-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cluster0_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster1-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cluster1_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ q6_dsp_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modemtx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ modemtx_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
};
timer {
@@ -796,6 +953,11 @@
reg = <0x24f 0x1>;
bits = <1 4>;
};
+
+ gpu_speed_bin: gpu_speed_bin@133 {
+ reg = <0x133 0x1>;
+ bits = <5 3>;
+ };
};
phy@34000 {
@@ -1138,6 +1300,70 @@
};
};
+ adreno_smmu: arm,smmu@b40000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0xb40000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+
+ clocks = <&mmcc GPU_AHB_CLK>,
+ <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+ clock-names = "iface", "bus";
+
+ power-domains = <&mmcc GPU_GDSC>;
+
+ status = "disabled";
+ };
+
+ mdp_smmu: arm,smmu@d00000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0xd00000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ clocks = <&mmcc SMMU_MDP_AHB_CLK>,
+ <&mmcc SMMU_MDP_AXI_CLK>;
+ clock-names = "iface", "bus";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+
+ status = "disabled";
+ };
+
+ lpass_q6_smmu: arm,smmu-lpass_q6@1600000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x1600000 0x20000>;
+ #iommu-cells = <1>;
+ power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
+ <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+ clock-names = "iface", "bus";
+ status = "disabled";
+ };
+
agnoc@0 {
power-domains = <&gcc AGGRE0_NOC_GDSC>;
compatible = "simple-pm-bus";
@@ -1303,6 +1529,265 @@
"bus_slave";
};
};
+
+ slimbam:dma@9184000
+ {
+ compatible = "qcom,bam-v1.7.0";
+ qcom,controlled-remotely;
+ reg = <0x9184000 0x32000>;
+ num-channels = <31>;
+ interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <1>;
+ qcom,num-ees = <2>;
+ };
+
+ slim_msm: slim@91c0000 {
+ compatible = "qcom,slim-ngd-v1.5.0";
+ reg = <0x91c0000 0x2C000>;
+ reg-names = "ctrl";
+ interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&slimbam 3>, <&slimbam 4>,
+ <&slimbam 5>, <&slimbam 6>;
+ dma-names = "rx", "tx", "tx2", "rx2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ngd@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tasha_ifd: tas-ifd {
+ compatible = "slim217,1a0";
+ reg = <0 0>;
+ };
+
+ wcd9335: codec@1{
+ pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+ pinctrl-names = "default";
+
+ compatible = "slim217,1a0";
+ reg = <1 0>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr1", "intr2";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reset-gpios = <&msmgpio 64 0>;
+
+ slim-ifc-dev = <&tasha_ifd>;
+
+ vdd-buck-supply = <&pm8994_s4>;
+ vdd-buck-sido-supply = <&pm8994_s4>;
+ vdd-tx-supply = <&pm8994_s4>;
+ vdd-rx-supply = <&pm8994_s4>;
+ vdd-io-supply = <&pm8994_s4>;
+
+ #sound-dai-cells = <1>;
+ };
+ };
+ };
+
+ gpu@b00000 {
+ compatible = "qcom,adreno-530.2", "qcom,adreno";
+ #stream-id-cells = <16>;
+
+ reg = <0xb00000 0x3f000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc GPU_GX_GFX3D_CLK>,
+ <&mmcc GPU_AHB_CLK>,
+ <&mmcc GPU_GX_RBBMTIMER_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+
+ clock-names = "core",
+ "iface",
+ "rbbmtimer",
+ "mem",
+ "mem_iface";
+
+ power-domains = <&mmcc GPU_GDSC>;
+ iommus = <&adreno_smmu 0>;
+
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
+ qcom,gpu-quirk-two-pass-use-wfi;
+ qcom,gpu-quirk-fault-detect-mask;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ gpu_opp_table: opp-table {
+ compatible ="operating-points-v2";
+
+ /*
+ * 624Mhz and 560Mhz are only available on speed
+ * bin (1 << 0). All the rest are available on
+ * all bins of the hardware
+ */
+ opp-624000000 {
+ opp-hz = /bits/ 64 <624000000>;
+ opp-supported-hw = <0x01>;
+ };
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000>;
+ opp-supported-hw = <0x01>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-401800000 {
+ opp-hz = /bits/ 64 <401800000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-315000000 {
+ opp-hz = /bits/ 64 <315000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-214000000 {
+ opp-hz = /bits/ 64 <214000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-133000000 {
+ opp-hz = /bits/ 64 <133000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ };
+
+ zap-shader {
+ memory-region = <&zap_shader_region>;
+ };
+ };
+
+ mdss: mdss@900000 {
+ compatible = "qcom,mdss";
+
+ reg = <0x900000 0x1000>,
+ <0x9b0000 0x1040>,
+ <0x9b8000 0x1040>;
+ reg-names = "mdss_phys",
+ "vbif_phys",
+ "vbif_nrt_phys";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>;
+ clock-names = "iface_clk";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdp: mdp@901000 {
+ compatible = "qcom,mdp5";
+ reg = <0x901000 0x90000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc SMMU_MDP_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface_clk",
+ "bus_clk",
+ "core_clk",
+ "iommu_clk",
+ "vsync_clk";
+
+ iommus = <&mdp_smmu 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf3_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
+
+ hdmi: hdmi-tx@9a0000 {
+ compatible = "qcom,hdmi-tx-8996";
+ reg = <0x009a0000 0x50c>,
+ <0x00070000 0x6158>,
+ <0x009e0000 0xfff>;
+ reg-names = "core_physical",
+ "qfprom_physical",
+ "hdcp_physical";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_HDMI_CLK>,
+ <&mmcc MDSS_HDMI_AHB_CLK>,
+ <&mmcc MDSS_EXTPCLK_CLK>;
+ clock-names =
+ "mdp_core_clk",
+ "iface_clk",
+ "core_clk",
+ "alt_iface_clk",
+ "extp_clk";
+
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi_phy";
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ hdmi_in: endpoint {
+ remote-endpoint = <&mdp5_intf3_out>;
+ };
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@9a0600 {
+ #phy-cells = <0>;
+ compatible = "qcom,hdmi-phy-8996";
+ reg = <0x9a0600 0x1c4>,
+ <0x9a0a00 0x124>,
+ <0x9a0c00 0x124>,
+ <0x9a0e00 0x124>,
+ <0x9a1000 0x124>,
+ <0x9a1200 0x0c8>;
+ reg-names = "hdmi_pll",
+ "hdmi_tx_l0",
+ "hdmi_tx_l1",
+ "hdmi_tx_l2",
+ "hdmi_tx_l3",
+ "hdmi_phy";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&gcc GCC_HDMI_CLKREF_CLK>;
+ clock-names = "iface_clk",
+ "ref_clk";
+ };
+ };
+ };
+
+ sound: sound {
};
adsp-pil {
@@ -1331,6 +1816,55 @@
mboxes = <&apcs_glb 8>;
qcom,smd-edge = <1>;
qcom,remote-pid = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ apr {
+ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
+ compatible = "qcom,apr-v2";
+ qcom,smd-channels = "apr_audio_svc";
+ reg = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6core {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ };
+
+ q6afe: q6afe {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ hdmi@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ q6asm: q6asm {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #sound-dai-cells = <1>;
+ iommus = <&lpass_q6_smmu 1>;
+ };
+ };
+
+ q6adm: q6adm {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index f0901067b043..f09f3e03f708 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -15,44 +15,6 @@
stdout-path = "serial0:115200n8";
};
- thermal-zones {
- battery-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 0>;
-
- trips {
- battery_crit: trip0 {
- temperature = <60000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- skin-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 5>;
-
- trips {
- skin_alert: trip0 {
- temperature = <44000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- skip_crit: trip1 {
- temperature = <70000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -111,6 +73,7 @@
vreg_s4a_1p8: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
};
vreg_s5a_2p04: s5 {
regulator-min-microvolt = <1904000>;
@@ -195,6 +158,7 @@
vreg_l20a_2p95: l20 {
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
+ regulator-allow-set-load;
};
vreg_l21a_2p95: l21 {
regulator-min-microvolt = <2960000>;
@@ -221,6 +185,7 @@
vreg_l26a_1p2: l26 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
};
vreg_l28_3p0: l28 {
regulator-min-microvolt = <3008000>;
@@ -267,6 +232,25 @@
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
};
+&ufshc {
+ vcc-supply = <&vreg_l20a_2p95>;
+ vccq-supply = <&vreg_l26a_1p2>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vcc-max-microamp = <750000>;
+ vccq-max-microamp = <560000>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+ vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+ vdda-phy-max-microamp = <51400>;
+ vdda-pll-max-microamp = <14600>;
+ vddp-ref-clk-max-microamp = <100>;
+ vddp-ref-clk-always-on;
+};
+
&usb3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 3fd0769fe648..574be78a936e 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -78,7 +78,6 @@
compatible = "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "arm,arch-cache";
@@ -97,7 +96,6 @@
compatible = "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_1: l1-icache {
compatible = "arm,arch-cache";
@@ -112,7 +110,6 @@
compatible = "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_2: l1-icache {
compatible = "arm,arch-cache";
@@ -127,7 +124,6 @@
compatible = "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_3: l1-icache {
compatible = "arm,arch-cache";
@@ -142,7 +138,6 @@
compatible = "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "arm,arch-cache";
@@ -161,7 +156,6 @@
compatible = "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_101: l1-icache {
compatible = "arm,arch-cache";
@@ -176,7 +170,6 @@
compatible = "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_102: l1-icache {
compatible = "arm,arch-cache";
@@ -191,7 +184,6 @@
compatible = "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_103: l1-icache {
compatible = "arm,arch-cache";
@@ -346,20 +338,20 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 6>;
+ thermal-sensors = <&tsens0 1>;
trips {
- cpu_alert0: trip0 {
+ cpu0_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -367,20 +359,20 @@
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 7>;
+ thermal-sensors = <&tsens0 2>;
trips {
- cpu_alert1: trip0 {
+ cpu1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -388,20 +380,20 @@
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 8>;
+ thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert2: trip0 {
+ cpu2_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -409,20 +401,20 @@
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 9>;
+ thermal-sensors = <&tsens0 4>;
trips {
- cpu_alert3: trip0 {
+ cpu3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit3: trip1 {
+ cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -430,20 +422,20 @@
};
};
- cpu-thermal4 {
+ cpu4-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 10>;
+ thermal-sensors = <&tsens0 7>;
trips {
- cpu_alert4: trip0 {
+ cpu4_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit4: trip1 {
+ cpu4_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -451,20 +443,20 @@
};
};
- cpu-thermal5 {
+ cpu5-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 11>;
+ thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert5: trip0 {
+ cpu5_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit5: trip1 {
+ cpu5_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -472,20 +464,20 @@
};
};
- cpu-thermal6 {
+ cpu6-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens1 0>;
+ thermal-sensors = <&tsens0 9>;
trips {
- cpu_alert6: trip0 {
+ cpu6_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit6: trip1 {
+ cpu6_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -493,20 +485,20 @@
};
};
- cpu-thermal7 {
+ cpu7-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens1 1>;
+ thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert7: trip0 {
+ cpu7_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit7: trip1 {
+ cpu7_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -514,11 +506,169 @@
};
};
- gpu-thermal {
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ clust0-mhm-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cluster0_mhm_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ clust1-mhm-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cluster1_mhm_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster1-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cluster1_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 3>;
+
+ trips {
+ wlan_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6_dsp_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ multimedia-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ multimedia_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
};
@@ -590,17 +740,19 @@
cell-index = <0>;
};
- tsens0: thermal@10aa000 {
+ tsens0: thermal@10ab000 {
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
- reg = <0x10aa000 0x2000>;
+ reg = <0x10ab000 0x1000>, /* TM */
+ <0x10aa000 0x1000>; /* SROT */
- #qcom,sensors = <12>;
+ #qcom,sensors = <14>;
#thermal-sensor-cells = <1>;
};
- tsens1: thermal@10ad000 {
+ tsens1: thermal@10ae000 {
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
- reg = <0x10ad000 0x2000>;
+ reg = <0x10ae000 0x1000>, /* TM */
+ <0x10ad000 0x1000>; /* SROT */
#qcom,sensors = <8>;
#thermal-sensor-cells = <1>;
@@ -889,7 +1041,7 @@
blsp2_i2c5: i2c@c1ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x0c175000 0x600>;
+ reg = <0x0c1ba000 0x600>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
@@ -983,6 +1135,75 @@
redistributor-stride = <0x0 0x20000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ ufshc: ufshc@1da4000 {
+ compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x01da4000 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufsphy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ power-domains = <&gcc UFS_GDSC>;
+ #reset-cells = <1>;
+
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&gcc GCC_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE1_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AHB_CLK>,
+ <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+ <&rpmcc RPM_SMD_LN_BB_CLK1>,
+ <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
+ freq-table-hz =
+ <50000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 150000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ resets = <&gcc GCC_UFS_BCR>;
+ reset-names = "rst";
+ };
+
+ ufsphy: phy@1da7000 {
+ compatible = "qcom,msm8998-qmp-ufs-phy";
+ reg = <0x01da7000 0x18c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clock-names =
+ "ref",
+ "ref_aux";
+ clocks =
+ <&gcc GCC_UFS_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_AUX_CLK>;
+
+ reset-names = "ufsphy";
+ resets = <&ufshc 0>;
+
+ ufsphy_lanes: lanes@1da7400 {
+ reg = <0x01da7400 0x128>,
+ <0x01da7600 0x1fc>,
+ <0x01da7c00 0x1dc>,
+ <0x01da7800 0x128>,
+ <0x01da7a00 0x1fc>;
+ #phy-cells = <0>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
index c0ddf128136c..3f97607d8baa 100644
--- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -15,6 +15,7 @@
compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8005_gpio 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 43cb5ea14089..d3ca35a940fb 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -58,6 +58,8 @@
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
+ io-channel-names = "thermal";
#thermal-sensor-cells = <0>;
};
@@ -93,6 +95,7 @@
compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8998_gpio 0 0 26>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index 3aee10e3f921..21e05215abe4 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -14,6 +14,7 @@
compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pmi8994_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 051f57e7d6ac..23f9146a161e 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -13,6 +13,7 @@
compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pmi8998_gpio 0 0 14>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 1bb836d1e8aa..e8e186bc1ea7 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -131,4 +131,15 @@
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
};
+
+ pms405_1: pms405@1 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pms405_spmi_regulators: regulators {
+ compatible = "qcom,pms405-regulators";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
index 2c14903d808e..937eb4555ffe 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
@@ -7,5 +7,6 @@
/ {
model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
- compatible = "qcom,qcs404-evb";
+ compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb",
+ "qcom,qcs404";
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
index 11269ad3de0d..479ad3ac6c28 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -3,9 +3,92 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "qcs404-evb.dtsi"
/ {
model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
- compatible = "qcom,qcs404-evb";
+ compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb",
+ "qcom,qcs404";
+};
+
+&ethernet {
+ status = "ok";
+
+ snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 10000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet_defaults>;
+
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii";
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ device_type = "ethernet-phy";
+ reg = <0x4>;
+ };
+ };
+};
+
+&tlmm {
+ ethernet_defaults: ethernet-defaults {
+ int {
+ pins = "gpio61";
+ function = "rgmii_int";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ mdc {
+ pins = "gpio76";
+ function = "rgmii_mdc";
+ bias-pull-up;
+ };
+ mdio {
+ pins = "gpio75";
+ function = "rgmii_mdio";
+ bias-pull-up;
+ };
+ tx {
+ pins = "gpio67", "gpio66", "gpio65", "gpio64";
+ function = "rgmii_tx";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ rx {
+ pins = "gpio73", "gpio72", "gpio71", "gpio70";
+ function = "rgmii_rx";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ tx-ctl {
+ pins = "gpio68";
+ function = "rgmii_ctl";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ rx-ctl {
+ pins = "gpio74";
+ function = "rgmii_ctl";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ tx-ck {
+ pins = "gpio63";
+ function = "rgmii_ck";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ rx-ck {
+ pins = "gpio69";
+ function = "rgmii_ck";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 50b3589c7f15..2c3127167e3c 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -7,6 +7,7 @@
/ {
aliases {
serial0 = &blsp1_uart2;
+ serial1 = &blsp1_uart3;
};
chosen {
@@ -19,6 +20,52 @@
regulator-always-on;
regulator-boot-on;
};
+
+ vdd_ch0_3p3:
+ vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "eSMPS3_3P3";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+ vddio-supply = <&vreg_l6_1p8>;
+ vddxo-supply = <&vreg_l5_1p8>;
+ vddrf-supply = <&vreg_l1_1p3>;
+ vddch0-supply = <&vdd_ch0_3p3>;
+
+ local-bd-address = [ 02 00 00 00 5a ad ];
+
+ max-speed = <3200000>;
+ };
+};
+
+&blsp1_dma {
+ qcom,controlled-remotely;
+};
+
+&blsp2_dma {
+ qcom,controlled-remotely;
+};
+
+&pms405_spmi_regulators {
+ vdd_s3-supply = <&pms405_s3>;
+
+ pms405_s3: s3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd_apc";
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1352000>;
+ };
};
&remoteproc_adsp {
@@ -37,18 +84,18 @@
pms405-regulators {
compatible = "qcom,rpm-pms405-regulators";
- vdd-s1-supply = <&vph_pwr>;
- vdd-s2-supply = <&vph_pwr>;
- vdd-s3-supply = <&vph_pwr>;
- vdd-s4-supply = <&vph_pwr>;
- vdd-s5-supply = <&vph_pwr>;
- vdd-l1-l2-supply = <&vreg_s5_1p35>;
- vdd-l3-l8-supply = <&vreg_s5_1p35>;
- vdd-l4-supply = <&vreg_s5_1p35>;
- vdd-l5-l6-supply = <&vreg_s4_1p8>;
- vdd-l7-supply = <&vph_pwr>;
- vdd-l9-supply = <&vreg_s5_1p35>;
- vdd-l10-l11-l12-l13-supply = <&vph_pwr>;
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_l1_l2-supply = <&vreg_s5_1p35>;
+ vdd_l3_l8-supply = <&vreg_s5_1p35>;
+ vdd_l4-supply = <&vreg_s5_1p35>;
+ vdd_l5_l6-supply = <&vreg_s4_1p8>;
+ vdd_l7-supply = <&vph_pwr>;
+ vdd_l9-supply = <&vreg_s5_1p35>;
+ vdd_l10_l11_l12_l13-supply = <&vph_pwr>;
vreg_s4_1p8: s4 {
regulator-min-microvolt = <1728000>;
@@ -56,8 +103,8 @@
};
vreg_s5_1p35: s5 {
- regulator-min-microvolt = <>;
- regulator-max-microvolt = <>;
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
};
vreg_l1_1p3: l1 {
@@ -71,7 +118,7 @@
};
vreg_l3_1p05: l3 {
- regulator-min-microvolt = <976000>;
+ regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1160000>;
};
@@ -205,3 +252,21 @@
bias-disable;
};
};
+
+&blsp1_uart3_default {
+ cts {
+ pins = "gpio84";
+ bias-disable;
+ };
+
+ rts-tx {
+ pins = "gpio85", "gpio82";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio83";
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index e8fd26633d57..ffedf9640af7 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -435,7 +435,6 @@
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
- qcom,controlled-remotely = <1>;
qcom,ee = <0>;
status = "okay";
};
@@ -479,6 +478,27 @@
status = "okay";
};
+ ethernet: ethernet@7a80000 {
+ compatible = "qcom,qcs404-ethqos";
+ reg = <0x07a80000 0x10000>,
+ <0x07a96000 0x100>;
+ reg-names = "stmmaceth", "rgmii";
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+ clocks = <&gcc GCC_ETH_AXI_CLK>,
+ <&gcc GCC_ETH_SLAVE_AHB_CLK>,
+ <&gcc GCC_ETH_PTP_CLK>,
+ <&gcc GCC_ETH_RGMII_CLK>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+
+ snps,tso;
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <4096>;
+
+ status = "disabled";
+ };
+
wifi: wifi@a000000 {
compatible = "qcom,wcn3990-wifi";
reg = <0xa000000 0x800000>;
@@ -659,7 +679,6 @@
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
- qcom,controlled-remotely = <1>;
qcom,ee = <0>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index af8c6a2445a2..02b8357c8ce8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -48,6 +48,10 @@
};
};
+&adsp_pas {
+ status = "okay";
+};
+
&apps_rsc {
pm8998-rpmh-regulators {
compatible = "qcom,pm8998-rpmh-regulators";
@@ -344,6 +348,10 @@
};
};
+&cdsp_pas {
+ status = "okay";
+};
+
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 5308f1671824..fcb93300ca62 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -11,8 +11,10 @@
#include <dt-bindings/clock/qcom,lpass-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -73,29 +75,78 @@
#size-cells = <2>;
ranges;
- memory@85fc0000 {
+ hyp_mem: memory@85700000 {
+ reg = <0 0x85700000 0 0x600000>;
+ no-map;
+ };
+
+ xbl_mem: memory@85e00000 {
+ reg = <0 0x85e00000 0 0x100000>;
+ no-map;
+ };
+
+ aop_mem: memory@85fc0000 {
reg = <0 0x85fc0000 0 0x20000>;
no-map;
};
- memory@85fe0000 {
+ aop_cmd_db_mem: memory@85fe0000 {
compatible = "qcom,cmd-db";
- reg = <0x0 0x85fe0000 0x0 0x20000>;
+ reg = <0x0 0x85fe0000 0 0x20000>;
no-map;
};
smem_mem: memory@86000000 {
- reg = <0x0 0x86000000 0x0 0x200000>;
+ reg = <0x0 0x86000000 0 0x200000>;
no-map;
};
- memory@86200000 {
+ tz_mem: memory@86200000 {
reg = <0 0x86200000 0 0x2d00000>;
no-map;
};
- wlan_msa_mem: memory@96700000 {
- reg = <0 0x96700000 0 0x100000>;
+ rmtfs_mem: memory@88f00000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0x88f00000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
+ qseecom_mem: memory@8ab00000 {
+ reg = <0 0x8ab00000 0 0x1400000>;
+ no-map;
+ };
+
+ camera_mem: memory@8bf00000 {
+ reg = <0 0x8bf00000 0 0x500000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@8c400000 {
+ reg = <0 0x8c400000 0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@8c410000 {
+ reg = <0 0x8c410000 0 0x5000>;
+ no-map;
+ };
+
+ gpu_mem: memory@8c415000 {
+ reg = <0 0x8c415000 0 0x2000>;
+ no-map;
+ };
+
+ adsp_mem: memory@8c500000 {
+ reg = <0 0x8c500000 0 0x1a00000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8df00000 {
+ reg = <0 0x8df00000 0 0x100000>;
no-map;
};
@@ -104,10 +155,30 @@
no-map;
};
+ venus_mem: memory@95800000 {
+ reg = <0 0x95800000 0 0x500000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@95d00000 {
+ reg = <0 0x95d00000 0 0x800000>;
+ no-map;
+ };
+
mba_region: memory@96500000 {
reg = <0 0x96500000 0 0x200000>;
no-map;
};
+
+ slpi_mem: memory@96700000 {
+ reg = <0 0x96700000 0 0x1400000>;
+ no-map;
+ };
+
+ spss_mem: memory@97b00000 {
+ reg = <0 0x97b00000 0 0x100000>;
+ no-map;
+ };
};
cpus {
@@ -119,6 +190,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x0>;
enable-method = "psci";
+ capacity-dmips-mhz = <607>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
@@ -136,6 +208,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <607>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
next-level-cache = <&L2_100>;
@@ -150,6 +223,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x200>;
enable-method = "psci";
+ capacity-dmips-mhz = <607>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
next-level-cache = <&L2_200>;
@@ -164,6 +238,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x300>;
enable-method = "psci";
+ capacity-dmips-mhz = <607>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
next-level-cache = <&L2_300>;
@@ -178,6 +253,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x400>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_400>;
@@ -192,6 +268,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x500>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_500>;
@@ -206,6 +283,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x600>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_600>;
@@ -220,6 +298,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x700>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_700>;
@@ -228,6 +307,44 @@
next-level-cache = <&L3_0>;
};
};
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
};
pmu {
@@ -264,6 +381,64 @@
};
};
+ adsp_pas: remoteproc-adsp {
+ compatible = "qcom,sdm845-adsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ mboxes = <&apss_shared 8>;
+ };
+ };
+
+ cdsp_pas: remoteproc-cdsp {
+ compatible = "qcom,sdm845-cdsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ memory-region = <&cdsp_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+ label = "turing";
+ qcom,remote-pid = <5>;
+ mboxes = <&apss_shared 4>;
+ };
+ };
+
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_regs 0 0x1000>;
@@ -1033,6 +1208,7 @@
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_PHY_GDSC>;
+ #reset-cells = <1>;
iommus = <&apps_smmu 0x100 0xf>;
@@ -1078,6 +1254,8 @@
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
status = "disabled";
ufs_mem_phy_lanes: lanes@1d87400 {
@@ -1853,8 +2031,9 @@
#clock-cells = <1>;
#phy-cells = <0>;
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
- clock-names = "iface";
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
status = "disabled";
};
@@ -1919,8 +2098,9 @@
#clock-cells = <1>;
#phy-cells = <0>;
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
- clock-names = "iface";
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
status = "disabled";
};
@@ -2098,43 +2278,43 @@
compatible = "operating-points-v2";
rpmhpd_opp_ret: opp1 {
- opp-level = <16>;
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
};
rpmhpd_opp_min_svs: opp2 {
- opp-level = <48>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
rpmhpd_opp_low_svs: opp3 {
- opp-level = <64>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
};
rpmhpd_opp_svs: opp4 {
- opp-level = <128>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
};
rpmhpd_opp_svs_l1: opp5 {
- opp-level = <192>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
rpmhpd_opp_nom: opp6 {
- opp-level = <256>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
rpmhpd_opp_nom_l1: opp7 {
- opp-level = <320>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
rpmhpd_opp_nom_l2: opp8 {
- opp-level = <336>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
};
rpmhpd_opp_turbo: opp9 {
- opp-level = <384>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
rpmhpd_opp_turbo_l1: opp10 {
- opp-level = <416>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
@@ -2611,5 +2791,210 @@
};
};
};
+
+ aoss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cluster0_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster0_crit: cluster0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cluster1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster1_crit: cluster1_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ q6_modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ wlan_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-hvx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6_hvx_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ video_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
index 14db66755a89..aaefc3ae56d5 100644
--- a/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -30,6 +30,18 @@
};
};
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&pciec0 {
status = "okay";
};
@@ -41,4 +53,14 @@
function = "avb";
};
};
+
+ can0_pins: can0 {
+ groups = "can0_data";
+ function = "can0";
+ };
+
+ can1_pins: can1 {
+ groups = "can1_data";
+ function = "can1";
+ };
};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index ef3cff2dd1b6..de282c4794ed 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -879,8 +879,10 @@
"renesas,rcar-gen3-can";
reg = <0 0xe6c30000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 916>, <&can_clk>;
- clock-names = "clkp1", "can_clk";
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 916>;
status = "disabled";
@@ -891,8 +893,10 @@
"renesas,rcar-gen3-can";
reg = <0 0xe6c38000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 915>, <&can_clk>;
- clock-names = "clkp1", "can_clk";
+ clocks = <&cpg CPG_MOD 915>,
+ <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 915>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index 96ee0d2c6357..013a48c01211 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -22,6 +22,30 @@
stdout-path = "serial0:115200n8";
};
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ label = "LED0";
+ };
+
+ led1 {
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ label = "LED1";
+ };
+
+ led2 {
+ gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ label = "LED2";
+ };
+
+ led3 {
+ gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+ label = "LED3";
+ };
+ };
+
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
@@ -52,10 +76,33 @@
};
};
+&ehci0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <48000000>;
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rtc@32 {
+ compatible = "epson,rx8571";
+ reg = <0x32>;
+ };
+};
+
+&ohci0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&pcie_bus_clk {
clock-frequency = <100000000>;
};
@@ -66,6 +113,11 @@
};
&pfc {
+ i2c1_pins: i2c1 {
+ groups = "i2c1_b";
+ function = "i2c1";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
@@ -84,6 +136,11 @@
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
@@ -104,3 +161,8 @@
sd-uhs-sdr104;
status = "okay";
};
+
+&usb2_phy0 {
+ renesas,no-otg-pins;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 1ea684af99c4..3f86db199dbf 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -76,7 +76,7 @@
power-domains = <&sysc R8A774C0_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -87,7 +87,7 @@
power-domains = <&sysc R8A774C0_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -969,8 +969,10 @@
"renesas,rcar-gen3-can";
reg = <0 0xe6c30000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 916>, <&can_clk>;
- clock-names = "clkp1", "can_clk";
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 916>;
status = "disabled";
@@ -981,13 +983,40 @@
"renesas,rcar-gen3-can";
reg = <0 0xe6c38000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 915>, <&can_clk>;
- clock-names = "clkp1", "can_clk";
+ clocks = <&cpg CPG_MOD 915>,
+ <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 915>;
status = "disabled";
};
+ canfd: can@e66c0000 {
+ compatible = "renesas,r8a774c0-canfd",
+ "renesas,rcar-gen3-canfd";
+ reg = <0 0xe66c0000 0 0x8000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 914>,
+ <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+
+ channel1 {
+ status = "disabled";
+ };
+ };
+
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 0x8>;
@@ -1740,8 +1769,7 @@
};
csi40: csi2@feaa0000 {
- compatible = "renesas,r8a774c0-csi2",
- "renesas,rcar-gen3-csi2";
+ compatible = "renesas,r8a774c0-csi2";
reg = <0 0xfeaa0000 0 0x10000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 716>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index abeac3059383..097538cc4b1f 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -462,6 +462,76 @@
reg = <0 0xe6060000 0 0x50c>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a7795-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a7795-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a7795-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a7795-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7795-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -1836,7 +1906,7 @@
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x280>, /* SSI */
- <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index b4f9567cb9f8..2aefa53cb16b 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -68,6 +68,7 @@
ports {
/* rsnd_port0 is on salvator-common */
rsnd_port1: port@1 {
+ reg = <1>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
index 31f12059355e..d58ede18108d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
@@ -68,6 +68,7 @@
ports {
/* rsnd_port0 is on salvator-common */
rsnd_port1: port@1 {
+ reg = <1>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index cdf784899cf8..d5e2f4af83a4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1775,7 +1775,7 @@
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x280>, /* SSI */
- <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
@@ -2162,17 +2162,6 @@
dma-names = "rx", "tx";
};
};
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- };
- port@1 {
- reg = <1>;
- };
- };
};
audma0: dma-controller@ec700000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 9763d108e183..2554b1742dbf 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -317,6 +317,76 @@
reg = <0 0xe6060000 0 0x50c>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77965-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77965-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77965-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77965-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77965-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -1461,7 +1531,7 @@
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x280>, /* SSI */
- <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
@@ -1585,56 +1655,267 @@
};
};
+ rcar_sound,ssiu {
+ ssiu00: ssiu-0 {
+ dmas = <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx";
+ };
+ ssiu01: ssiu-1 {
+ dmas = <&audma0 0x35>, <&audma1 0x36>;
+ dma-names = "rx", "tx";
+ };
+ ssiu02: ssiu-2 {
+ dmas = <&audma0 0x37>, <&audma1 0x38>;
+ dma-names = "rx", "tx";
+ };
+ ssiu03: ssiu-3 {
+ dmas = <&audma0 0x47>, <&audma1 0x48>;
+ dma-names = "rx", "tx";
+ };
+ ssiu04: ssiu-4 {
+ dmas = <&audma0 0x3F>, <&audma1 0x40>;
+ dma-names = "rx", "tx";
+ };
+ ssiu05: ssiu-5 {
+ dmas = <&audma0 0x43>, <&audma1 0x44>;
+ dma-names = "rx", "tx";
+ };
+ ssiu06: ssiu-6 {
+ dmas = <&audma0 0x4F>, <&audma1 0x50>;
+ dma-names = "rx", "tx";
+ };
+ ssiu07: ssiu-7 {
+ dmas = <&audma0 0x53>, <&audma1 0x54>;
+ dma-names = "rx", "tx";
+ };
+ ssiu10: ssiu-8 {
+ dmas = <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu11: ssiu-9 {
+ dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu12: ssiu-10 {
+ dmas = <&audma0 0x57>, <&audma1 0x58>;
+ dma-names = "rx", "tx";
+ };
+ ssiu13: ssiu-11 {
+ dmas = <&audma0 0x59>, <&audma1 0x5A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu14: ssiu-12 {
+ dmas = <&audma0 0x5F>, <&audma1 0x60>;
+ dma-names = "rx", "tx";
+ };
+ ssiu15: ssiu-13 {
+ dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu16: ssiu-14 {
+ dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu17: ssiu-15 {
+ dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu20: ssiu-16 {
+ dmas = <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx";
+ };
+ ssiu21: ssiu-17 {
+ dmas = <&audma0 0x67>, <&audma1 0x68>;
+ dma-names = "rx", "tx";
+ };
+ ssiu22: ssiu-18 {
+ dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu23: ssiu-19 {
+ dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu24: ssiu-20 {
+ dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu25: ssiu-21 {
+ dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu26: ssiu-22 {
+ dmas = <&audma0 0xED>, <&audma1 0xEE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu27: ssiu-23 {
+ dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+ dma-names = "rx", "tx";
+ };
+ ssiu30: ssiu-24 {
+ dmas = <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx";
+ };
+ ssiu31: ssiu-25 {
+ dmas = <&audma0 0x21>, <&audma1 0x22>;
+ dma-names = "rx", "tx";
+ };
+ ssiu32: ssiu-26 {
+ dmas = <&audma0 0x23>, <&audma1 0x24>;
+ dma-names = "rx", "tx";
+ };
+ ssiu33: ssiu-27 {
+ dmas = <&audma0 0x25>, <&audma1 0x26>;
+ dma-names = "rx", "tx";
+ };
+ ssiu34: ssiu-28 {
+ dmas = <&audma0 0x27>, <&audma1 0x28>;
+ dma-names = "rx", "tx";
+ };
+ ssiu35: ssiu-29 {
+ dmas = <&audma0 0x29>, <&audma1 0x2A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu36: ssiu-30 {
+ dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu37: ssiu-31 {
+ dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu40: ssiu-32 {
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx";
+ };
+ ssiu41: ssiu-33 {
+ dmas = <&audma0 0x17>, <&audma1 0x18>;
+ dma-names = "rx", "tx";
+ };
+ ssiu42: ssiu-34 {
+ dmas = <&audma0 0x19>, <&audma1 0x1A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu43: ssiu-35 {
+ dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu44: ssiu-36 {
+ dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu45: ssiu-37 {
+ dmas = <&audma0 0x1F>, <&audma1 0x20>;
+ dma-names = "rx", "tx";
+ };
+ ssiu46: ssiu-38 {
+ dmas = <&audma0 0x31>, <&audma1 0x32>;
+ dma-names = "rx", "tx";
+ };
+ ssiu47: ssiu-39 {
+ dmas = <&audma0 0x33>, <&audma1 0x34>;
+ dma-names = "rx", "tx";
+ };
+ ssiu50: ssiu-40 {
+ dmas = <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx";
+ };
+ ssiu60: ssiu-41 {
+ dmas = <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx";
+ };
+ ssiu70: ssiu-42 {
+ dmas = <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu80: ssiu-43 {
+ dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx";
+ };
+ ssiu90: ssiu-44 {
+ dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx";
+ };
+ ssiu91: ssiu-45 {
+ dmas = <&audma0 0x7F>, <&audma1 0x80>;
+ dma-names = "rx", "tx";
+ };
+ ssiu92: ssiu-46 {
+ dmas = <&audma0 0x81>, <&audma1 0x82>;
+ dma-names = "rx", "tx";
+ };
+ ssiu93: ssiu-47 {
+ dmas = <&audma0 0x83>, <&audma1 0x84>;
+ dma-names = "rx", "tx";
+ };
+ ssiu94: ssiu-48 {
+ dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu95: ssiu-49 {
+ dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+ dma-names = "rx", "tx";
+ };
+ ssiu96: ssiu-50 {
+ dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu97: ssiu-51 {
+ dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+ dma-names = "rx", "tx";
+ };
+ };
+
rcar_sound,ssi {
ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x01>, <&audma1 0x02>;
+ dma-names = "rx", "tx";
};
ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x03>, <&audma1 0x04>;
+ dma-names = "rx", "tx";
};
ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x05>, <&audma1 0x06>;
+ dma-names = "rx", "tx";
};
ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x07>, <&audma1 0x08>;
+ dma-names = "rx", "tx";
};
ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x09>, <&audma1 0x0a>;
+ dma-names = "rx", "tx";
};
ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+ dma-names = "rx", "tx";
};
ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+ dma-names = "rx", "tx";
};
ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x0f>, <&audma1 0x10>;
+ dma-names = "rx", "tx";
};
ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x11>, <&audma1 0x12>;
+ dma-names = "rx", "tx";
};
ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
- dma-names = "rx", "tx", "rxu", "txu";
+ dmas = <&audma0 0x13>, <&audma1 0x14>;
+ dma-names = "rx", "tx";
};
};
};
@@ -2166,7 +2447,6 @@
du: display@feb00000 {
compatible = "renesas,du-r8a77965";
reg = <0 0xfeb00000 0 0x80000>;
- reg-names = "du";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 4081622d548a..a901a341dcf7 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -865,6 +865,7 @@
clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 811>;
+ renesas,id = <0>;
status = "disabled";
ports {
@@ -892,6 +893,7 @@
clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
status = "disabled";
+ renesas,id = <1>;
resets = <&cpg 810>;
ports {
@@ -919,6 +921,7 @@
clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 809>;
+ renesas,id = <2>;
status = "disabled";
ports {
@@ -946,6 +949,7 @@
clocks = <&cpg CPG_MOD 808>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 808>;
+ renesas,id = <3>;
status = "disabled";
ports {
@@ -973,6 +977,7 @@
clocks = <&cpg CPG_MOD 807>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 807>;
+ renesas,id = <4>;
status = "disabled";
ports {
@@ -1000,6 +1005,7 @@
clocks = <&cpg CPG_MOD 806>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 806>;
+ renesas,id = <5>;
status = "disabled";
ports {
@@ -1027,6 +1033,7 @@
clocks = <&cpg CPG_MOD 805>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 805>;
+ renesas,id = <6>;
status = "disabled";
ports {
@@ -1054,6 +1061,7 @@
clocks = <&cpg CPG_MOD 804>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 804>;
+ renesas,id = <7>;
status = "disabled";
ports {
@@ -1081,6 +1089,7 @@
clocks = <&cpg CPG_MOD 628>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 628>;
+ renesas,id = <8>;
status = "disabled";
};
@@ -1091,6 +1100,7 @@
clocks = <&cpg CPG_MOD 627>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 627>;
+ renesas,id = <9>;
status = "disabled";
};
@@ -1101,6 +1111,7 @@
clocks = <&cpg CPG_MOD 625>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 625>;
+ renesas,id = <10>;
status = "disabled";
};
@@ -1111,6 +1122,7 @@
clocks = <&cpg CPG_MOD 618>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 618>;
+ renesas,id = <11>;
status = "disabled";
};
@@ -1121,6 +1133,7 @@
clocks = <&cpg CPG_MOD 612>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 612>;
+ renesas,id = <12>;
status = "disabled";
};
@@ -1131,6 +1144,7 @@
clocks = <&cpg CPG_MOD 608>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 608>;
+ renesas,id = <13>;
status = "disabled";
};
@@ -1141,6 +1155,7 @@
clocks = <&cpg CPG_MOD 605>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 605>;
+ renesas,id = <14>;
status = "disabled";
};
@@ -1151,6 +1166,7 @@
clocks = <&cpg CPG_MOD 604>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 604>;
+ renesas,id = <15>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 144c0820cf60..c72772589953 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the ebisu board
*
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -337,6 +337,15 @@
&i2c0 {
status = "okay";
+ io_expander: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+ };
+
hdmi-encoder@39 {
compatible = "adi,adv7511w";
reg = <0x39>;
@@ -398,7 +407,7 @@
};
port@a {
- reg = <0xa>;
+ reg = <10>;
adv7482_txa: endpoint {
clock-lanes = <0>;
@@ -440,6 +449,28 @@
};
};
+&i2c_dvfs {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ pmic: pmic@30 {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
+ compatible = "rohm,bd9571mwv";
+ reg = <0x30>;
+ interrupt-parent = <&intc_ex>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ rohm,ddr-backup-power = <0x1>;
+ rohm,rstbmode-level;
+ };
+};
+
&lvds0 {
status = "okay";
@@ -458,6 +489,13 @@
};
&lvds1 {
+ /*
+ * Even though the LVDS1 output is not connected, the encoder must be
+ * enabled to supply a pixel clock to the DU for the DPAD output when
+ * LVDS0 is in use.
+ */
+ status = "okay";
+
clocks = <&cpg CPG_MOD 727>,
<&x13_clk>,
<&extal_clk>;
@@ -495,6 +533,11 @@
function = "du";
};
+ irq0_pins: irq0 {
+ groups = "intc_ex_irq0";
+ function = "intc_ex";
+ };
+
pwm3_pins: pwm3 {
groups = "pwm3_b";
function = "pwm3";
@@ -650,6 +693,10 @@
status = "okay";
};
+&vin5 {
+ status = "okay";
+};
+
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index d2ad665fe2d9..56cb566ffa09 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the R-Car E3 (R8A77990) SoC
*
@@ -284,6 +284,76 @@
status = "disabled";
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77990-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77990-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77990-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77990-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77990-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -1656,7 +1726,7 @@
};
csi40: csi2@feaa0000 {
- compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2";
+ compatible = "renesas,r8a77990-csi2";
reg = <0 0xfeaa0000 0 0x10000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 716>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index db2bed1751b8..a7dc11e36fd9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -168,7 +168,6 @@
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
status = "okay";
phy0: ethernet-phy@0 {
@@ -179,6 +178,18 @@
};
};
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
@@ -356,6 +367,13 @@
};
&lvds1 {
+ /*
+ * Even though the LVDS1 output is not connected, the encoder must be
+ * enabled to supply a pixel clock to the DU for the DPAD output when
+ * LVDS0 is in use.
+ */
+ status = "okay";
+
clocks = <&cpg CPG_MOD 727>,
<&x12_clk>,
<&extal_clk>;
@@ -375,6 +393,16 @@
};
};
+ can0_pins: can0 {
+ groups = "can0_data_a";
+ function = "can0";
+ };
+
+ can1_pins: can1 {
+ groups = "can1_data_a";
+ function = "can1";
+ };
+
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index a225c2457274..2dba1328acfa 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -29,6 +29,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
aliases {
@@ -86,6 +87,63 @@
};
};
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW4-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW4-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW4-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "SW4-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-a {
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_A>;
+ label = "TSW0";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-b {
+ gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_B>;
+ label = "TSW1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-c {
+ gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_C>;
+ label = "TSW2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
@@ -572,6 +630,11 @@
function = "intc_ex";
};
+ keys_pins: keys {
+ pins = "GP_5_17", "GP_5_20", "GP_5_22";
+ bias-pull-up;
+ };
+
pwm1_pins: pwm1 {
groups = "pwm1_a";
function = "pwm1";
@@ -719,6 +782,11 @@
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif1 {
pinctrl-0 = <&scif1_pins>;
pinctrl-names = "default";
@@ -857,11 +925,6 @@
status = "okay";
};
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 1b28fa72ea0b..5f2687acbf94 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 263d7f3dbc44..6eb7407a84aa 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -145,12 +145,12 @@
soc_slppin_slp: soc_slppin_slp {
rockchip,pins =
- <0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+ <0 RK_PA4 1 &pcfg_pull_none>;
};
soc_slppin_rst: soc_slppin_rst {
rockchip,pins =
- <0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>;
+ <0 RK_PA4 2 &pcfg_pull_none>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 8302d86d35c4..49c4b96da3d4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -208,7 +208,7 @@
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins =
- <1 18 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 0e34354b2092..5d499c9086fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -81,18 +81,55 @@
regulator-always-on;
regulator-boot-on;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "firefly:blue:power";
+ linux,default-trigger = "heartbeat";
+ gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ mode = <0x23>;
+ };
+
+ user {
+ label = "firefly:yellow:user";
+ linux,default-trigger = "mmc1";
+ gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ mode = <0x05>;
+ };
+ };
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
+ max-frequency = <150000000>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_emmc>;
status = "okay";
};
@@ -113,6 +150,14 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
@@ -296,3 +341,11 @@
&usb_host0_ohci {
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 79b4d1d4b5d6..7cfd5ca6cc85 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -64,6 +64,27 @@
regulator-max-microvolt = <5000000>;
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "mmc0";
+ };
+
+ standby {
+ gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
sound {
compatible = "audio-graph-card";
label = "rockchip,rk3328";
@@ -156,6 +177,8 @@
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
@@ -217,7 +240,7 @@
};
vcc_18: LDO_REG1 {
- regulator-name = "vdd_18";
+ regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
@@ -229,7 +252,7 @@
};
vcc18_emmc: LDO_REG2 {
- regulator-name = "vcc_18emmc";
+ regulator-name = "vcc18_emmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
@@ -280,6 +303,12 @@
};
&pinctrl {
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index dabef1a21649..994468671b19 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -657,14 +657,17 @@
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>,
- <&cru SCLK_HDMI_SFC>;
+ <&cru SCLK_HDMI_SFC>,
+ <&cru SCLK_RTC32K>;
clock-names = "iahb",
- "isfr";
+ "isfr",
+ "cec";
phys = <&hdmiphy>;
phy-names = "hdmi";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
status = "disabled";
ports {
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index e96eb62f362b..1c52f47c43a6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -154,60 +154,60 @@
backlight {
bl_en: bl-en {
- rockchip,pins = <0 20 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
emmc {
emmc_bus8: emmc-bus8 {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
};
emmc-clk {
- rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
};
emmc-cmd {
- rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
};
emmc_reset: emmc-reset {
- rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
keys {
pwr_key: pwr-key {
- rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
pmic_int: pmic-int {
- rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdio {
wifi_reg_on: wifi-reg-on {
- rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_rst: bt-rst {
- rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index 8fa550cbd1a4..1d0778ff217c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -233,23 +233,23 @@
&pinctrl {
ir {
ir_int: ir-int {
- rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
keys {
pwr_key: pwr-key {
- rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_sleep: pmic-sleep {
- rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
};
pmic_int: pmic-int {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
index fca8e87d8f52..8251f3c0d0a8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -113,34 +113,34 @@
haikou_pin_hog: haikou-pin-hog {
rockchip,pins =
/* LID_BTN */
- <RK_GPIO3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
/* BATLOW# */
- <RK_GPIO0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
/* SLP_BTN# */
- <RK_GPIO3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
/* BIOS_DISABLE# */
- <RK_GPIO3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
led_sd_haikou: led-sd-gpio {
rockchip,pins =
- <RK_GPIO0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_cd_gpio: sdmmc-cd-gpio {
rockchip,pins =
- <RK_GPIO2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_otg {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins =
- <RK_GPIO0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index 1b35d612b660..e17311e09082 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -56,8 +56,6 @@
fan: fan@18 {
compatible = "ti,amc6821";
reg = <0x18>;
- cooling-min-state = <0>;
- cooling-max-state = <9>;
#cooling-cells = <2>;
};
@@ -274,17 +272,17 @@
leds {
led_pins_module: led-module-gpio {
rockchip,pins =
- <RK_GPIO2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
- <RK_GPIO3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
- rockchip,pins = <RK_GPIO0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
pmic_sleep: pmic-sleep {
- rockchip,pins = <RK_GPIO0 RK_PA0 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index f5aa3cad67c5..6cc310255da8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -226,73 +226,73 @@
emmc {
emmc_bus8: emmc-bus8 {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
};
emmc-clk {
- rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
};
emmc-cmd {
- rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
};
emmc_reset: emmc-reset {
- rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
keys {
pwr_key: pwr-key {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
leds {
stby_pwren: stby-pwren {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
led_ctl: led-ctl {
- rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none_drv_8ma>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up_drv_8ma>;
};
sdmmc_cd: sdmmc-cd {
- rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up_drv_8ma>;
};
sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>;
};
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PA6 1 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PA7 1 &pcfg_pull_up_drv_8ma>,
+ <2 RK_PB0 1 &pcfg_pull_up_drv_8ma>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 41edcfd53184..231db0305a03 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -218,17 +218,17 @@
&pinctrl {
keys {
pwr_key: pwr-key {
- rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_sleep: pmic-sleep {
- rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
};
pmic_int: pmic-int {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index d34064c65f10..006a1fb6a816 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -235,64 +235,64 @@
emmc {
emmc_bus8: emmc-bus8 {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
- <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
+ <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
};
emmc-clk {
- rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
};
emmc-cmd {
- rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
};
emmc_reset: emmc-reset {
- rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
ir {
ir_int: ir-int {
- rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
keys {
pwr_key: pwr-key {
- rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
stby_pwren: stby-pwren {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
led_ctl: led-ctl {
- rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio {
wifi_reg_on: wifi-reg-on {
- rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_rst: bt-rst {
- rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 06e7c31d7d07..fd86188010b2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -881,345 +881,345 @@
emmc {
emmc_clk: emmc-clk {
- rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>;
};
emmc_pwr: emmc-pwr {
- rockchip,pins = <1 27 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>;
};
emmc_bus1: emmc-bus1 {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>;
};
emmc_bus4: emmc-bus4 {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>,
- <1 19 RK_FUNC_2 &pcfg_pull_up>,
- <1 20 RK_FUNC_2 &pcfg_pull_up>,
- <1 21 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+ <1 RK_PC3 2 &pcfg_pull_up>,
+ <1 RK_PC4 2 &pcfg_pull_up>,
+ <1 RK_PC5 2 &pcfg_pull_up>;
};
emmc_bus8: emmc-bus8 {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>,
- <1 19 RK_FUNC_2 &pcfg_pull_up>,
- <1 20 RK_FUNC_2 &pcfg_pull_up>,
- <1 21 RK_FUNC_2 &pcfg_pull_up>,
- <1 22 RK_FUNC_2 &pcfg_pull_up>,
- <1 23 RK_FUNC_2 &pcfg_pull_up>,
- <1 24 RK_FUNC_2 &pcfg_pull_up>,
- <1 25 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+ <1 RK_PC3 2 &pcfg_pull_up>,
+ <1 RK_PC4 2 &pcfg_pull_up>,
+ <1 RK_PC5 2 &pcfg_pull_up>,
+ <1 RK_PC6 2 &pcfg_pull_up>,
+ <1 RK_PC7 2 &pcfg_pull_up>,
+ <1 RK_PD0 2 &pcfg_pull_up>,
+ <1 RK_PD1 2 &pcfg_pull_up>;
};
};
gmac {
rgmii_pins: rgmii-pins {
- rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>,
- <3 24 RK_FUNC_1 &pcfg_pull_none>,
- <3 19 RK_FUNC_1 &pcfg_pull_none>,
- <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>,
- <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>,
- <3 10 RK_FUNC_1 &pcfg_pull_none_12ma>,
- <3 14 RK_FUNC_1 &pcfg_pull_none_12ma>,
- <3 28 RK_FUNC_1 &pcfg_pull_none_12ma>,
- <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>,
- <3 15 RK_FUNC_1 &pcfg_pull_none>,
- <3 16 RK_FUNC_1 &pcfg_pull_none>,
- <3 17 RK_FUNC_1 &pcfg_pull_none>,
- <3 18 RK_FUNC_1 &pcfg_pull_none>,
- <3 25 RK_FUNC_1 &pcfg_pull_none>,
- <3 20 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PC3 1 &pcfg_pull_none>,
+ <3 RK_PB0 1 &pcfg_pull_none_12ma>,
+ <3 RK_PB1 1 &pcfg_pull_none_12ma>,
+ <3 RK_PB2 1 &pcfg_pull_none_12ma>,
+ <3 RK_PB6 1 &pcfg_pull_none_12ma>,
+ <3 RK_PD4 1 &pcfg_pull_none_12ma>,
+ <3 RK_PB5 1 &pcfg_pull_none_12ma>,
+ <3 RK_PB7 1 &pcfg_pull_none>,
+ <3 RK_PC0 1 &pcfg_pull_none>,
+ <3 RK_PC1 1 &pcfg_pull_none>,
+ <3 RK_PC2 1 &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PC4 1 &pcfg_pull_none>;
};
rmii_pins: rmii-pins {
- rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>,
- <3 24 RK_FUNC_1 &pcfg_pull_none>,
- <3 19 RK_FUNC_1 &pcfg_pull_none>,
- <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>,
- <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>,
- <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>,
- <3 15 RK_FUNC_1 &pcfg_pull_none>,
- <3 16 RK_FUNC_1 &pcfg_pull_none>,
- <3 20 RK_FUNC_1 &pcfg_pull_none>,
- <3 21 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PC3 1 &pcfg_pull_none>,
+ <3 RK_PB0 1 &pcfg_pull_none_12ma>,
+ <3 RK_PB1 1 &pcfg_pull_none_12ma>,
+ <3 RK_PB5 1 &pcfg_pull_none_12ma>,
+ <3 RK_PB7 1 &pcfg_pull_none>,
+ <3 RK_PC0 1 &pcfg_pull_none>,
+ <3 RK_PC4 1 &pcfg_pull_none>,
+ <3 RK_PC5 1 &pcfg_pull_none>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
- rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
- <0 7 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
+ <0 RK_PA7 1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
- rockchip,pins = <2 21 RK_FUNC_1 &pcfg_pull_none>,
- <2 22 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>,
+ <2 RK_PC6 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
- rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_none>,
- <3 31 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB1 2 &pcfg_pull_none>,
+ <3 RK_PD7 2 &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
- rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>,
- <1 17 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>,
+ <1 RK_PC1 1 &pcfg_pull_none>;
};
};
i2c4 {
i2c4_xfer: i2c4-xfer {
- rockchip,pins = <3 24 RK_FUNC_2 &pcfg_pull_none>,
- <3 25 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>,
+ <3 RK_PD1 2 &pcfg_pull_none>;
};
};
i2c5 {
i2c5_xfer: i2c5-xfer {
- rockchip,pins = <3 26 RK_FUNC_2 &pcfg_pull_none>,
- <3 27 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD2 2 &pcfg_pull_none>,
+ <3 RK_PD3 2 &pcfg_pull_none>;
};
};
i2s {
i2s_8ch_bus: i2s-8ch-bus {
- rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_none>,
- <2 13 RK_FUNC_1 &pcfg_pull_none>,
- <2 14 RK_FUNC_1 &pcfg_pull_none>,
- <2 15 RK_FUNC_1 &pcfg_pull_none>,
- <2 16 RK_FUNC_1 &pcfg_pull_none>,
- <2 17 RK_FUNC_1 &pcfg_pull_none>,
- <2 18 RK_FUNC_1 &pcfg_pull_none>,
- <2 19 RK_FUNC_1 &pcfg_pull_none>,
- <2 20 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>,
+ <2 RK_PB5 1 &pcfg_pull_none>,
+ <2 RK_PB6 1 &pcfg_pull_none>,
+ <2 RK_PB7 1 &pcfg_pull_none>,
+ <2 RK_PC0 1 &pcfg_pull_none>,
+ <2 RK_PC1 1 &pcfg_pull_none>,
+ <2 RK_PC2 1 &pcfg_pull_none>,
+ <2 RK_PC3 1 &pcfg_pull_none>,
+ <2 RK_PC4 1 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_pin: pwm0-pin {
- rockchip,pins = <3 8 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PB0 2 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
- rockchip,pins = <0 8 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
- rockchip,pins = <3 29 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD5 3 &pcfg_pull_none>;
};
};
sdio0 {
sdio0_bus1: sdio0-bus1 {
- rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>;
};
sdio0_bus4: sdio0-bus4 {
- rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>,
- <2 29 RK_FUNC_1 &pcfg_pull_up>,
- <2 30 RK_FUNC_1 &pcfg_pull_up>,
- <2 31 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>,
+ <2 RK_PD5 1 &pcfg_pull_up>,
+ <2 RK_PD6 1 &pcfg_pull_up>,
+ <2 RK_PD7 1 &pcfg_pull_up>;
};
sdio0_cmd: sdio0-cmd {
- rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PA0 1 &pcfg_pull_up>;
};
sdio0_clk: sdio0-clk {
- rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>;
};
sdio0_cd: sdio0-cd {
- rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PA2 1 &pcfg_pull_up>;
};
sdio0_wp: sdio0-wp {
- rockchip,pins = <3 3 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PA3 1 &pcfg_pull_up>;
};
sdio0_pwr: sdio0-pwr {
- rockchip,pins = <3 4 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PA4 1 &pcfg_pull_up>;
};
sdio0_bkpwr: sdio0-bkpwr {
- rockchip,pins = <3 5 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PA5 1 &pcfg_pull_up>;
};
sdio0_int: sdio0-int {
- rockchip,pins = <3 6 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
- rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>;
};
sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>;
};
sdmmc_cd: sdmmc-cd {
- rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>;
};
sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
};
sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>,
- <2 6 RK_FUNC_1 &pcfg_pull_up>,
- <2 7 RK_FUNC_1 &pcfg_pull_up>,
- <2 8 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>,
+ <2 RK_PA6 1 &pcfg_pull_up>,
+ <2 RK_PA7 1 &pcfg_pull_up>,
+ <2 RK_PB0 1 &pcfg_pull_up>;
};
};
spdif {
spdif_tx: spdif-tx {
- rockchip,pins = <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
};
};
spi0 {
spi0_clk: spi0-clk {
- rockchip,pins = <1 29 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PD5 2 &pcfg_pull_up>;
};
spi0_cs0: spi0-cs0 {
- rockchip,pins = <1 24 RK_FUNC_3 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PD0 3 &pcfg_pull_up>;
};
spi0_cs1: spi0-cs1 {
- rockchip,pins = <1 25 RK_FUNC_3 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PD1 3 &pcfg_pull_up>;
};
spi0_tx: spi0-tx {
- rockchip,pins = <1 23 RK_FUNC_3 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC7 3 &pcfg_pull_up>;
};
spi0_rx: spi0-rx {
- rockchip,pins = <1 22 RK_FUNC_3 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC6 3 &pcfg_pull_up>;
};
};
spi1 {
spi1_clk: spi1-clk {
- rockchip,pins = <1 14 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>;
};
spi1_cs0: spi1-cs0 {
- rockchip,pins = <1 15 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PB7 2 &pcfg_pull_up>;
};
spi1_cs1: spi1-cs1 {
- rockchip,pins = <3 28 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD4 2 &pcfg_pull_up>;
};
spi1_rx: spi1-rx {
- rockchip,pins = <1 16 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC0 2 &pcfg_pull_up>;
};
spi1_tx: spi1-tx {
- rockchip,pins = <1 17 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC1 2 &pcfg_pull_up>;
};
};
spi2 {
spi2_clk: spi2-clk {
- rockchip,pins = <0 12 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB4 2 &pcfg_pull_up>;
};
spi2_cs0: spi2-cs0 {
- rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>;
};
spi2_rx: spi2-rx {
- rockchip,pins = <0 10 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB2 2 &pcfg_pull_up>;
};
spi2_tx: spi2-tx {
- rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>;
};
};
tsadc {
otp_gpio: otp-gpio {
- rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
otp_out: otp-out {
- rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>,
- <2 25 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up>,
+ <2 RK_PD1 1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
- rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
- rockchip,pins = <2 27 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <0 20 RK_FUNC_3 &pcfg_pull_up>,
- <0 21 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC4 3 &pcfg_pull_up>,
+ <0 RK_PC5 3 &pcfg_pull_none>;
};
uart1_cts: uart1-cts {
- rockchip,pins = <0 22 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC6 3 &pcfg_pull_none>;
};
uart1_rts: uart1-rts {
- rockchip,pins = <0 23 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC7 3 &pcfg_pull_none>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <2 6 RK_FUNC_2 &pcfg_pull_up>,
- <2 5 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA6 2 &pcfg_pull_up>,
+ <2 RK_PA5 2 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
};
uart3 {
uart3_xfer: uart3-xfer {
- rockchip,pins = <3 29 RK_FUNC_2 &pcfg_pull_up>,
- <3 30 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PD5 2 &pcfg_pull_up>,
+ <3 RK_PD6 3 &pcfg_pull_none>;
};
uart3_cts: uart3-cts {
- rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>;
};
uart3_rts: uart3-rts {
- rockchip,pins = <3 17 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PC1 2 &pcfg_pull_none>;
};
};
uart4 {
uart4_xfer: uart4-xfer {
- rockchip,pins = <0 27 RK_FUNC_3 &pcfg_pull_up>,
- <0 26 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD3 3 &pcfg_pull_up>,
+ <0 RK_PD2 3 &pcfg_pull_none>;
};
uart4_cts: uart4-cts {
- rockchip,pins = <0 24 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD0 3 &pcfg_pull_none>;
};
uart4_rts: uart4-rts {
- rockchip,pins = <0 25 RK_FUNC_3 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD1 3 &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 959ddc3c7df5..77008dca45bc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -208,19 +208,19 @@
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
- <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
pmic_dvs2: pmic-dvs2 {
rockchip,pins =
- <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
- <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
index 027d428917b8..6b059bd7a04f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -95,53 +95,53 @@
gmac {
rgmii_sleep_pins: rgmii-sleep-pins {
rockchip,pins =
- <3 15 RK_FUNC_GPIO &pcfg_output_low>;
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
};
};
pcie {
pcie_drv: pcie-drv {
rockchip,pins =
- <1 24 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb2 {
host_vbus_drv: host-vbus-drv {
rockchip,pins =
- <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
user_led1: user_led1 {
rockchip,pins =
- <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led2: user_led2 {
rockchip,pins =
- <4 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led3: user_led3 {
rockchip,pins =
- <4 30 RK_FUNC_GPIO &pcfg_pull_none>;
+ <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led4: user_led4 {
rockchip,pins =
- <1 0 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
wlan_led: wlan_led {
rockchip,pins =
- <1 1 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_led: bt_led {
rockchip,pins =
- <1 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
index d1cf404b8708..a9f4d6d7d2b7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -73,7 +73,7 @@
&pinctrl {
tpm {
h1_int_od_l: h1-int-od-l {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 931640e9aed4..7cd6d470c1cb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -365,27 +365,27 @@ ap_i2c_tp: &i2c5 {
&pinctrl {
discrete-regulators {
pp1500_en: pp1500-en {
- rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
&pcfg_pull_none>;
};
pp1800_audio_en: pp1800-audio-en {
- rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
&pcfg_pull_down>;
};
pp3000_en: pp3000-en {
- rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
&pcfg_pull_none>;
};
pp3300_disp_en: pp3300-disp-en {
- rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
+ rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
&pcfg_pull_none>;
};
wlan_module_pd_l: wlan-module-pd-l {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
&pcfg_pull_down>;
};
};
@@ -393,10 +393,10 @@ ap_i2c_tp: &i2c5 {
&wifi {
wifi_perst_l: wifi-perst-l {
- rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
wlan_host_wake_l: wlan-host-wake-l {
- rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 15e254a77391..3e2272b56eb7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -290,24 +290,24 @@ ap_i2c_dig: &i2c2 {
digitizer {
/* Has external pullup */
cpu1_dig_irq_l: cpu1-dig-irq-l {
- rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
/* Has external pullup */
cpu1_dig_pdct_l: cpu1-dig-pdct-l {
- rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
discrete-regulators {
cpu3_pen_pwr_en: cpu3-pen-pwr-en {
- rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pen {
cpu1_pen_eject: cpu1-pen-eject {
- rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 62ea7d6a7d4a..50dfab51f175 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -455,58 +455,58 @@ camera: &i2c7 {
/* PINCTRL OVERRIDES */
&ec_ap_int_l {
- rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
};
&ap_fw_wp {
- rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
&bl_en {
- rockchip,pins = <4 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
&bt_host_wake_l {
- rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
&ec_ap_int_l {
- rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
};
&headset_int_l {
- rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
};
&i2s0_8ch_bus {
rockchip,pins =
- <3 24 RK_FUNC_1 &pcfg_pull_none_6ma>,
- <3 25 RK_FUNC_1 &pcfg_pull_none_6ma>,
- <3 26 RK_FUNC_1 &pcfg_pull_none_6ma>,
- <3 27 RK_FUNC_1 &pcfg_pull_none_6ma>,
- <3 31 RK_FUNC_1 &pcfg_pull_none_6ma>,
- <4 0 RK_FUNC_1 &pcfg_pull_none_6ma>;
+ <3 RK_PD0 1 &pcfg_pull_none_6ma>,
+ <3 RK_PD1 1 &pcfg_pull_none_6ma>,
+ <3 RK_PD2 1 &pcfg_pull_none_6ma>,
+ <3 RK_PD3 1 &pcfg_pull_none_6ma>,
+ <3 RK_PD7 1 &pcfg_pull_none_6ma>,
+ <4 RK_PA0 1 &pcfg_pull_none_6ma>;
};
/* there is no external pull up, so need to set this pin pull up */
&sdmmc_cd_gpio {
- rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
};
&sd_pwr_1800_sel {
- rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
};
&sdmode_en {
- rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
};
&touch_reset_l {
- rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
};
&touch_int_l {
- rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
};
&pinctrl {
@@ -523,84 +523,84 @@ camera: &i2c7 {
camera {
pp1250_cam_en: pp1250-dvdd {
- rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
pp2800_cam_en: pp2800-avdd {
- rockchip,pins = <2 24 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
ucam_rst: ucam_rst {
- rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
wcam_rst: wcam_rst {
- rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
digitizer {
pen_int_odl: pen-int-odl {
- rockchip,pins = <1 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
pen_reset_l: pen-reset-l {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
discrete-regulators {
display_rst_l: display-rst-l {
- rockchip,pins = <4 25 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
};
ppvarp_lcd_en: ppvarp-lcd-en {
- rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
ppvarn_lcd_en: ppvarn-lcd-en {
- rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
dmic {
dmic_en: dmic-en {
- rockchip,pins = <4 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pen {
pen_eject_odl: pen-eject-odl {
- rockchip,pins = <1 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
tpm {
h1_int_od_l: h1-int-od-l {
- rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&wifi {
bt_en_1v8_l: bt-en-1v8-l {
- rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
wlan_pd_1v8_l: wlan-pd-1v8-l {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
/* Default pull-up, but just to be clear */
wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
wifi_perst_l: wifi-perst-l {
- rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
wlan_host_wake_l: wlan-host-wake-l {
- rockchip,pins = <1 3 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index da03fa9c5662..dd5624975c9b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -676,29 +676,29 @@ ap_i2c_audio: &i2c8 {
backlight-enable {
bl_en: bl-en {
- rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
cros-ec {
ec_ap_int_l: ec-ap-int-l {
- rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
discrete-regulators {
sd_io_pwr_en: sd-io-pwr-en {
- rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
&pcfg_pull_none>;
};
sd_pwr_1800_sel: sd-pwr-1800-sel {
- rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
&pcfg_pull_none>;
};
sd_slot_pwr_en: sd-slot-pwr-en {
- rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO
+ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
&pcfg_pull_none>;
};
};
@@ -706,17 +706,17 @@ ap_i2c_audio: &i2c8 {
codec {
/* Has external pullup */
headset_int_l: headset-int-l {
- rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
};
mic_int: mic-int {
- rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
max98357a {
sdmode_en: sdmode-en {
- rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
@@ -727,7 +727,7 @@ ap_i2c_audio: &i2c8 {
* to hack this as gpio, so the EP could be able to
* de-assert it along and make ClockPM(CPM) work.
*/
- rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -738,20 +738,20 @@ ap_i2c_audio: &i2c8 {
*/
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>,
- <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>,
- <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>,
- <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>;
+ <4 RK_PB0 1 &pcfg_pull_none_8ma>,
+ <4 RK_PB1 1 &pcfg_pull_none_8ma>,
+ <4 RK_PB2 1 &pcfg_pull_none_8ma>,
+ <4 RK_PB3 1 &pcfg_pull_none_8ma>;
};
sdmmc_clk: sdmmc-clk {
rockchip,pins =
- <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>;
+ <4 RK_PB4 1 &pcfg_pull_none_8ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins =
- <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>;
+ <4 RK_PB5 1 &pcfg_pull_none_8ma>;
};
/*
@@ -765,12 +765,12 @@ ap_i2c_audio: &i2c8 {
*/
sdmmc_cd: sdmmc-cd {
rockchip,pins =
- <0 7 RK_FUNC_1 &pcfg_pull_none>;
+ <0 RK_PA7 1 &pcfg_pull_none>;
};
/* This is where we actually hook up CD; has external pull */
sdmmc_cd_gpio: sdmmc-cd-gpio {
- rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -780,47 +780,47 @@ ap_i2c_audio: &i2c8 {
* Pull down SPI1 CLK/CS/RX/TX during suspend, to
* prevent leakage.
*/
- rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>,
- <1 10 RK_FUNC_GPIO &pcfg_pull_down>,
- <1 7 RK_FUNC_GPIO &pcfg_pull_down>,
- <1 8 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
+ <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
+ <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
touchscreen {
touch_int_l: touch-int-l {
- rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
};
touch_reset_l: touch-reset-l {
- rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
trackpad {
ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
- rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
};
trackpad_int_l: trackpad-int-l {
- rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
wifi: wifi {
wlan_module_reset_l: wlan-module-reset-l {
- rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_host_wake_l: bt-host-wake-l {
/* Kevin has an external pull up, but Gru does not */
- rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
write-protect {
ap_fw_wp: ap-fw-wp {
- rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index 84433cf02be9..2a127985ab17 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -52,13 +52,80 @@
pinctrl-names = "default";
pinctrl-0 = <&ir_rx>;
};
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ /*
+ * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
+ * work out to 0, ~1200, ~3000, and 5000RPM respectively.
+ */
+ cooling-levels = <0 12 18 255>;
+ #cooling-cells = <2>;
+ fan-supply = <&vcc12v0_sys>;
+ pwms = <&pwm1 0 50000 0>;
+ };
+};
+
+&cpu_thermal {
+ trips {
+ cpu_warm: cpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map2 {
+ trip = <&cpu_warm>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map3 {
+ trip = <&cpu_hot>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&gpu_thermal {
+ trips {
+ gpu_warm: gpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ gpu_hot: gpu_hot {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+ cooling-maps {
+ map1 {
+ trip = <&gpu_warm>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map2 {
+ trip = <&gpu_hot>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
};
&pinctrl {
ir {
ir_rx: ir-rx {
/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
- rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts
new file mode 100644
index 000000000000..195410b089b9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyARM NanoPi NEO4";
+ compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_core: vcc5v0-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_core";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
+
+ vcc5v0_usb1: vcc5v0-usb1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb1";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+ regulator-always-on;
+ vin-supply = <&vdd_5v>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index d325e117287b..dd16c80d923e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -148,15 +148,28 @@
assigned-clocks = <&cru SCLK_RMII_SRC>;
clock_in_out = "input";
pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
+ pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
+ phy-handle = <&rtl8211e>;
phy-mode = "rgmii";
phy-supply = <&vcc3v3_s3>;
snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
+ snps,reset-delays-us = <0 10000 30000>;
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: phy@1 {
+ reg = <1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
};
&gpu {
@@ -481,6 +494,16 @@
};
};
+ phy {
+ phy_intb: phy-intb {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rstb: phy-rstb {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
cpu_b_sleep: cpu-b-sleep {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
new file mode 100644
index 000000000000..0541dfce924d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/input/input.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Orange Pi RK3399 Board";
+ compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <100000>;
+ };
+
+ button-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <300000>;
+ };
+
+ back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ press-threshold-microvolt = <985000>;
+ };
+
+ menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <1314000>;
+ };
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ linux,input-type = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_btn>;
+ wakeup-source;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-boot-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vbus_typec: vbus-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vbus_typec";
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc3v3_s3>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_3v0>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_tp: LDO_REG2 {
+ regulator-name = "vcc3v0_tp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmupll: LDO_REG3 {
+ regulator-name = "vcc1v8_pmupll";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+
+ ak09911@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+ vdd-supply = <&vcc3v3_s3>;
+ vid-supply = <&vcc3v3_s3>;
+ };
+
+ mpu6500@68 {
+ compatible = "invensense,mpu6500";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsensor_int_l>;
+ vddio-supply = <&vcc3v3_s3>;
+ };
+
+ lsm6ds3@6a {
+ compatible = "st,lsm6ds3";
+ reg = <0x6a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyr_int_l>;
+ vdd-supply = <&vcc3v3_s3>;
+ vddio-supply = <&vcc3v3_s3>;
+ };
+
+ cm32181@10 {
+ compatible = "capella,cm32181";
+ reg = <0x10>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&light_int_l>;
+ vdd-supply = <&vcc3v3_s3>;
+ };
+
+ fusb302@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&chg_cc_int_l>;
+ vbus-supply = <&vbus_typec>;
+ };
+};
+
+&io_domains {
+ status = "okay";
+ bt656-supply = <&vcc_3v0>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+ buttons {
+ pwr_btn: pwr-btn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sd {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins =
+ <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins =
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_typec_en: vcc5v0-typec-en {
+ rockchip,pins =
+ <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ bluetooth {
+ bt_reg_on_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ mpu6500 {
+ gsensor_int_l: gsensor-int-l {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lsm6ds3 {
+ gyr_int_l: gyr-int-l {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ cm32181 {
+ light_int_l: light-int-l {
+ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ fusb302 {
+ chg_cc_int_l: chg-cc-int-l {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ clock-frequency = <50000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ max-frequency = <50000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ clock-frequency = <150000000>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vbus_typec>;
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 1e6a71066c16..d80d6b726820 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -168,27 +168,27 @@
haikou_pin_hog: haikou-pin-hog {
rockchip,pins =
/* LID_BTN */
- <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
/* BATLOW# */
- <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
/* SLP_BTN# */
- <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
/* BIOS_DISABLE# */
- <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
led_sd_haikou: led-sd-gpio {
rockchip,pins =
- <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb2 {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins =
- <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 0130b9f98c9d..62ea288a1a70 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -146,6 +146,7 @@
&emmc_phy {
status = "okay";
+ drive-impedance-ohm = <33>;
};
&gmac {
@@ -369,8 +370,6 @@
fan: fan@18 {
compatible = "ti,amc6821";
reg = <0x18>;
- cooling-min-state = <0>;
- cooling-max-state = <9>;
#cooling-cells = <2>;
};
@@ -413,10 +412,10 @@
*/
&i2s0_2ch_bus {
rockchip,pins =
- <RK_GPIO3 RK_PD0 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 RK_PD2 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 RK_PD3 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 RK_PD7 RK_FUNC_1 &pcfg_pull_none>;
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>;
};
&io_domains {
@@ -440,29 +439,29 @@
i2c8 {
i2c8_xfer_a: i2c8-xfer {
rockchip,pins =
- <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>;
+ <1 RK_PC4 1 &pcfg_pull_up>,
+ <1 RK_PC5 1 &pcfg_pull_up>;
};
};
leds {
led_pin_module: led-module-gpio {
rockchip,pins =
- <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
- <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
- <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index 844eac939a97..e030627159c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -157,6 +157,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&hdmi {
ddc-i2c-bus = <&i2c3>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index 2927db4dda9d..c7d48d41e184 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -18,6 +18,15 @@
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
+ vcc12v_dcin: vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vcc1v8_s0: vcc1v8-s0 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8_s0";
@@ -26,12 +35,13 @@
regulator-always-on;
};
- vcc_sys: vcc-sys {
+ vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
+ regulator-name = "vcc5v0_sys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
+ vin-supply = <&vcc12v_dcin>;
};
vcc3v3_sys: vcc3v3-sys {
@@ -40,7 +50,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
- vin-supply = <&vcc_sys>;
+ vin-supply = <&vcc5v0_sys>;
};
vcc3v3_pcie: vcc3v3-pcie-regulator {
@@ -64,7 +74,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
- vin-supply = <&vcc_sys>;
+ vin-supply = <&vcc5v0_sys>;
};
};
@@ -96,6 +106,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&hdmi {
ddc-i2c-bus = <&i2c3>;
pinctrl-names = "default";
@@ -123,7 +138,7 @@
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
- vin-supply = <&vcc_sys>;
+ vin-supply = <&vcc5v0_sys>;
status = "okay";
regulator-state-mem {
@@ -141,7 +156,7 @@
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
- vin-supply = <&vcc_sys>;
+ vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -159,16 +174,16 @@
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc5v0_sys>;
vcc12-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc_1v8>;
@@ -396,62 +411,62 @@
sdmmc {
sdmmc_bus1: sdmmc-bus1 {
rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ <4 RK_PB0 1 &pcfg_pull_up_8ma>;
};
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ <4 RK_PB0 1 &pcfg_pull_up_8ma>,
+ <4 RK_PB1 1 &pcfg_pull_up_8ma>,
+ <4 RK_PB2 1 &pcfg_pull_up_8ma>,
+ <4 RK_PB3 1 &pcfg_pull_up_8ma>;
};
sdmmc_clk: sdmmc-clk {
rockchip,pins =
- <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
+ <4 RK_PB4 1 &pcfg_pull_none_18ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins =
- <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ <4 RK_PB5 1 &pcfg_pull_up_8ma>;
};
};
sdio0 {
sdio0_bus4: sdio0-bus4 {
rockchip,pins =
- <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>,
- <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>,
- <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>,
- <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ <2 RK_PC4 1 &pcfg_pull_up_20ma>,
+ <2 RK_PC5 1 &pcfg_pull_up_20ma>,
+ <2 RK_PC6 1 &pcfg_pull_up_20ma>,
+ <2 RK_PC7 1 &pcfg_pull_up_20ma>;
};
sdio0_cmd: sdio0-cmd {
rockchip,pins =
- <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ <2 RK_PD0 1 &pcfg_pull_up_20ma>;
};
sdio0_clk: sdio0-clk {
rockchip,pins =
- <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>;
+ <2 RK_PD1 1 &pcfg_pull_none_20ma>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
- <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
vsel1_gpio: vsel1-gpio {
rockchip,pins =
- <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
+ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
vsel2_gpio: vsel2-gpio {
rockchip,pins =
- <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 1f2394e0587d..20ec7d1c25d7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -222,6 +222,10 @@
status = "okay";
};
+&hdmi_sound {
+ status = "okay";
+};
+
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
@@ -504,7 +508,7 @@
status = "okay";
bt656-supply = <&vcc1v8_dvp>;
- audio-supply = <&vcca1v8_codec>;
+ audio-supply = <&vcc_3v0>;
sdmmc-supply = <&vcc_sdio>;
gpio1830-supply = <&vcc_3v0>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 946d3589575a..04623e52ac5d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -471,7 +471,7 @@
fan {
motor_pwr: motor-pwr {
rockchip,pins =
- <RK_GPIO1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -493,7 +493,7 @@
sd {
sdmmc0_pwr_h: sdmmc0-pwr-h {
rockchip,pins =
- <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index db9d948c0b03..196ac9b78076 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -71,6 +71,7 @@
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
+ capacity-dmips-mhz = <485>;
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
@@ -82,6 +83,7 @@
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
+ capacity-dmips-mhz = <485>;
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
@@ -93,6 +95,7 @@
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
+ capacity-dmips-mhz = <485>;
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
@@ -104,6 +107,7 @@
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
+ capacity-dmips-mhz = <485>;
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
@@ -115,6 +119,7 @@
compatible = "arm,cortex-a72";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
@@ -126,6 +131,7 @@
compatible = "arm,cortex-a72";
reg = <0x0 0x101>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
@@ -333,6 +339,7 @@
phys = <&emmc_phy>;
phy-names = "phy_arasan";
power-domains = <&power RK3399_PD_EMMC>;
+ disable-cqe-dcmd;
status = "disabled";
};
@@ -1450,6 +1457,7 @@
clock-names = "refclk";
#phy-cells = <1>;
resets = <&cru SRST_PCIEPHY>;
+ drive-impedance-ohm = <50>;
reset-names = "phy";
status = "disabled";
};
@@ -2045,14 +2053,14 @@
clock {
clk_32k: clk-32k {
- rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
};
};
edp {
edp_hpd: edp-hpd {
rockchip,pins =
- <4 23 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PC7 2 &pcfg_pull_none>;
};
};
@@ -2060,576 +2068,576 @@
rgmii_pins: rgmii-pins {
rockchip,pins =
/* mac_txclk */
- <3 17 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PC1 1 &pcfg_pull_none_13ma>,
/* mac_rxclk */
- <3 14 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB6 1 &pcfg_pull_none>,
/* mac_mdio */
- <3 13 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB5 1 &pcfg_pull_none>,
/* mac_txen */
- <3 12 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PB4 1 &pcfg_pull_none_13ma>,
/* mac_clk */
- <3 11 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB3 1 &pcfg_pull_none>,
/* mac_rxdv */
- <3 9 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB1 1 &pcfg_pull_none>,
/* mac_mdc */
- <3 8 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB0 1 &pcfg_pull_none>,
/* mac_rxd1 */
- <3 7 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA7 1 &pcfg_pull_none>,
/* mac_rxd0 */
- <3 6 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA6 1 &pcfg_pull_none>,
/* mac_txd1 */
- <3 5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PA5 1 &pcfg_pull_none_13ma>,
/* mac_txd0 */
- <3 4 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PA4 1 &pcfg_pull_none_13ma>,
/* mac_rxd3 */
- <3 3 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA3 1 &pcfg_pull_none>,
/* mac_rxd2 */
- <3 2 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA2 1 &pcfg_pull_none>,
/* mac_txd3 */
- <3 1 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PA1 1 &pcfg_pull_none_13ma>,
/* mac_txd2 */
- <3 0 RK_FUNC_1 &pcfg_pull_none_13ma>;
+ <3 RK_PA0 1 &pcfg_pull_none_13ma>;
};
rmii_pins: rmii-pins {
rockchip,pins =
/* mac_mdio */
- <3 13 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB5 1 &pcfg_pull_none>,
/* mac_txen */
- <3 12 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PB4 1 &pcfg_pull_none_13ma>,
/* mac_clk */
- <3 11 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB3 1 &pcfg_pull_none>,
/* mac_rxer */
- <3 10 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB2 1 &pcfg_pull_none>,
/* mac_rxdv */
- <3 9 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB1 1 &pcfg_pull_none>,
/* mac_mdc */
- <3 8 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB0 1 &pcfg_pull_none>,
/* mac_rxd1 */
- <3 7 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA7 1 &pcfg_pull_none>,
/* mac_rxd0 */
- <3 6 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA6 1 &pcfg_pull_none>,
/* mac_txd1 */
- <3 5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PA5 1 &pcfg_pull_none_13ma>,
/* mac_txd0 */
- <3 4 RK_FUNC_1 &pcfg_pull_none_13ma>;
+ <3 RK_PA4 1 &pcfg_pull_none_13ma>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins =
- <1 15 RK_FUNC_2 &pcfg_pull_none>,
- <1 16 RK_FUNC_2 &pcfg_pull_none>;
+ <1 RK_PB7 2 &pcfg_pull_none>,
+ <1 RK_PC0 2 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins =
- <4 2 RK_FUNC_1 &pcfg_pull_none>,
- <4 1 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PA2 1 &pcfg_pull_none>,
+ <4 RK_PA1 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
rockchip,pins =
- <2 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <2 0 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ <2 RK_PA1 2 &pcfg_pull_none_12ma>,
+ <2 RK_PA0 2 &pcfg_pull_none_12ma>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
rockchip,pins =
- <4 17 RK_FUNC_1 &pcfg_pull_none>,
- <4 16 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC1 1 &pcfg_pull_none>,
+ <4 RK_PC0 1 &pcfg_pull_none>;
};
};
i2c4 {
i2c4_xfer: i2c4-xfer {
rockchip,pins =
- <1 12 RK_FUNC_1 &pcfg_pull_none>,
- <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PB4 1 &pcfg_pull_none>,
+ <1 RK_PB3 1 &pcfg_pull_none>;
};
};
i2c5 {
i2c5_xfer: i2c5-xfer {
rockchip,pins =
- <3 11 RK_FUNC_2 &pcfg_pull_none>,
- <3 10 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PB3 2 &pcfg_pull_none>,
+ <3 RK_PB2 2 &pcfg_pull_none>;
};
};
i2c6 {
i2c6_xfer: i2c6-xfer {
rockchip,pins =
- <2 10 RK_FUNC_2 &pcfg_pull_none>,
- <2 9 RK_FUNC_2 &pcfg_pull_none>;
+ <2 RK_PB2 2 &pcfg_pull_none>,
+ <2 RK_PB1 2 &pcfg_pull_none>;
};
};
i2c7 {
i2c7_xfer: i2c7-xfer {
rockchip,pins =
- <2 8 RK_FUNC_2 &pcfg_pull_none>,
- <2 7 RK_FUNC_2 &pcfg_pull_none>;
+ <2 RK_PB0 2 &pcfg_pull_none>,
+ <2 RK_PA7 2 &pcfg_pull_none>;
};
};
i2c8 {
i2c8_xfer: i2c8-xfer {
rockchip,pins =
- <1 21 RK_FUNC_1 &pcfg_pull_none>,
- <1 20 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PC5 1 &pcfg_pull_none>,
+ <1 RK_PC4 1 &pcfg_pull_none>;
};
};
i2s0 {
i2s0_2ch_bus: i2s0-2ch-bus {
rockchip,pins =
- <3 24 RK_FUNC_1 &pcfg_pull_none>,
- <3 25 RK_FUNC_1 &pcfg_pull_none>,
- <3 26 RK_FUNC_1 &pcfg_pull_none>,
- <3 27 RK_FUNC_1 &pcfg_pull_none>,
- <3 31 RK_FUNC_1 &pcfg_pull_none>,
- <4 0 RK_FUNC_1 &pcfg_pull_none>;
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ <4 RK_PA0 1 &pcfg_pull_none>;
};
i2s0_8ch_bus: i2s0-8ch-bus {
rockchip,pins =
- <3 24 RK_FUNC_1 &pcfg_pull_none>,
- <3 25 RK_FUNC_1 &pcfg_pull_none>,
- <3 26 RK_FUNC_1 &pcfg_pull_none>,
- <3 27 RK_FUNC_1 &pcfg_pull_none>,
- <3 28 RK_FUNC_1 &pcfg_pull_none>,
- <3 29 RK_FUNC_1 &pcfg_pull_none>,
- <3 30 RK_FUNC_1 &pcfg_pull_none>,
- <3 31 RK_FUNC_1 &pcfg_pull_none>,
- <4 0 RK_FUNC_1 &pcfg_pull_none>;
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD4 1 &pcfg_pull_none>,
+ <3 RK_PD5 1 &pcfg_pull_none>,
+ <3 RK_PD6 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ <4 RK_PA0 1 &pcfg_pull_none>;
};
};
i2s1 {
i2s1_2ch_bus: i2s1-2ch-bus {
rockchip,pins =
- <4 3 RK_FUNC_1 &pcfg_pull_none>,
- <4 4 RK_FUNC_1 &pcfg_pull_none>,
- <4 5 RK_FUNC_1 &pcfg_pull_none>,
- <4 6 RK_FUNC_1 &pcfg_pull_none>,
- <4 7 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PA3 1 &pcfg_pull_none>,
+ <4 RK_PA4 1 &pcfg_pull_none>,
+ <4 RK_PA5 1 &pcfg_pull_none>,
+ <4 RK_PA6 1 &pcfg_pull_none>,
+ <4 RK_PA7 1 &pcfg_pull_none>;
};
};
sdio0 {
sdio0_bus1: sdio0-bus1 {
rockchip,pins =
- <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PC4 1 &pcfg_pull_up>;
};
sdio0_bus4: sdio0-bus4 {
rockchip,pins =
- <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>,
- <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>,
- <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>,
- <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PC4 1 &pcfg_pull_up>,
+ <2 RK_PC5 1 &pcfg_pull_up>,
+ <2 RK_PC6 1 &pcfg_pull_up>,
+ <2 RK_PC7 1 &pcfg_pull_up>;
};
sdio0_cmd: sdio0-cmd {
rockchip,pins =
- <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PD0 1 &pcfg_pull_up>;
};
sdio0_clk: sdio0-clk {
rockchip,pins =
- <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ <2 RK_PD1 1 &pcfg_pull_none>;
};
sdio0_cd: sdio0-cd {
rockchip,pins =
- <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PD2 1 &pcfg_pull_up>;
};
sdio0_pwr: sdio0-pwr {
rockchip,pins =
- <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PD3 1 &pcfg_pull_up>;
};
sdio0_bkpwr: sdio0-bkpwr {
rockchip,pins =
- <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PD4 1 &pcfg_pull_up>;
};
sdio0_wp: sdio0-wp {
rockchip,pins =
- <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>;
+ <0 RK_PA3 1 &pcfg_pull_up>;
};
sdio0_int: sdio0-int {
rockchip,pins =
- <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>;
+ <0 RK_PA4 1 &pcfg_pull_up>;
};
};
sdmmc {
sdmmc_bus1: sdmmc-bus1 {
rockchip,pins =
- <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ <4 RK_PB0 1 &pcfg_pull_up>;
};
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins =
- <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>,
- <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>,
- <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>,
- <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>;
+ <4 RK_PB0 1 &pcfg_pull_up>,
+ <4 RK_PB1 1 &pcfg_pull_up>,
+ <4 RK_PB2 1 &pcfg_pull_up>,
+ <4 RK_PB3 1 &pcfg_pull_up>;
};
sdmmc_clk: sdmmc-clk {
rockchip,pins =
- <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PB4 1 &pcfg_pull_none>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins =
- <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>;
+ <4 RK_PB5 1 &pcfg_pull_up>;
};
sdmmc_cd: sdmmc-cd {
rockchip,pins =
- <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>;
+ <0 RK_PA7 1 &pcfg_pull_up>;
};
sdmmc_wp: sdmmc-wp {
rockchip,pins =
- <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ <0 RK_PB0 1 &pcfg_pull_up>;
};
};
sleep {
ap_pwroff: ap-pwroff {
- rockchip,pins = <1 5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
};
ddrio_pwroff: ddrio-pwroff {
- rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
};
};
spdif {
spdif_bus: spdif-bus {
rockchip,pins =
- <4 21 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC5 1 &pcfg_pull_none>;
};
spdif_bus_1: spdif-bus-1 {
rockchip,pins =
- <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>;
+ <3 RK_PC0 3 &pcfg_pull_none>;
};
};
spi0 {
spi0_clk: spi0-clk {
rockchip,pins =
- <3 6 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA6 2 &pcfg_pull_up>;
};
spi0_cs0: spi0-cs0 {
rockchip,pins =
- <3 7 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA7 2 &pcfg_pull_up>;
};
spi0_cs1: spi0-cs1 {
rockchip,pins =
- <3 8 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PB0 2 &pcfg_pull_up>;
};
spi0_tx: spi0-tx {
rockchip,pins =
- <3 5 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA5 2 &pcfg_pull_up>;
};
spi0_rx: spi0-rx {
rockchip,pins =
- <3 4 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA4 2 &pcfg_pull_up>;
};
};
spi1 {
spi1_clk: spi1-clk {
rockchip,pins =
- <1 9 RK_FUNC_2 &pcfg_pull_up>;
+ <1 RK_PB1 2 &pcfg_pull_up>;
};
spi1_cs0: spi1-cs0 {
rockchip,pins =
- <1 10 RK_FUNC_2 &pcfg_pull_up>;
+ <1 RK_PB2 2 &pcfg_pull_up>;
};
spi1_rx: spi1-rx {
rockchip,pins =
- <1 7 RK_FUNC_2 &pcfg_pull_up>;
+ <1 RK_PA7 2 &pcfg_pull_up>;
};
spi1_tx: spi1-tx {
rockchip,pins =
- <1 8 RK_FUNC_2 &pcfg_pull_up>;
+ <1 RK_PB0 2 &pcfg_pull_up>;
};
};
spi2 {
spi2_clk: spi2-clk {
rockchip,pins =
- <2 11 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PB3 1 &pcfg_pull_up>;
};
spi2_cs0: spi2-cs0 {
rockchip,pins =
- <2 12 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PB4 1 &pcfg_pull_up>;
};
spi2_rx: spi2-rx {
rockchip,pins =
- <2 9 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PB1 1 &pcfg_pull_up>;
};
spi2_tx: spi2-tx {
rockchip,pins =
- <2 10 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PB2 1 &pcfg_pull_up>;
};
};
spi3 {
spi3_clk: spi3-clk {
rockchip,pins =
- <1 17 RK_FUNC_1 &pcfg_pull_up>;
+ <1 RK_PC1 1 &pcfg_pull_up>;
};
spi3_cs0: spi3-cs0 {
rockchip,pins =
- <1 18 RK_FUNC_1 &pcfg_pull_up>;
+ <1 RK_PC2 1 &pcfg_pull_up>;
};
spi3_rx: spi3-rx {
rockchip,pins =
- <1 15 RK_FUNC_1 &pcfg_pull_up>;
+ <1 RK_PB7 1 &pcfg_pull_up>;
};
spi3_tx: spi3-tx {
rockchip,pins =
- <1 16 RK_FUNC_1 &pcfg_pull_up>;
+ <1 RK_PC0 1 &pcfg_pull_up>;
};
};
spi4 {
spi4_clk: spi4-clk {
rockchip,pins =
- <3 2 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA2 2 &pcfg_pull_up>;
};
spi4_cs0: spi4-cs0 {
rockchip,pins =
- <3 3 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA3 2 &pcfg_pull_up>;
};
spi4_rx: spi4-rx {
rockchip,pins =
- <3 0 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA0 2 &pcfg_pull_up>;
};
spi4_tx: spi4-tx {
rockchip,pins =
- <3 1 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA1 2 &pcfg_pull_up>;
};
};
spi5 {
spi5_clk: spi5-clk {
rockchip,pins =
- <2 22 RK_FUNC_2 &pcfg_pull_up>;
+ <2 RK_PC6 2 &pcfg_pull_up>;
};
spi5_cs0: spi5-cs0 {
rockchip,pins =
- <2 23 RK_FUNC_2 &pcfg_pull_up>;
+ <2 RK_PC7 2 &pcfg_pull_up>;
};
spi5_rx: spi5-rx {
rockchip,pins =
- <2 20 RK_FUNC_2 &pcfg_pull_up>;
+ <2 RK_PC4 2 &pcfg_pull_up>;
};
spi5_tx: spi5-tx {
rockchip,pins =
- <2 21 RK_FUNC_2 &pcfg_pull_up>;
+ <2 RK_PC5 2 &pcfg_pull_up>;
};
};
testclk {
test_clkout0: test-clkout0 {
rockchip,pins =
- <0 0 RK_FUNC_1 &pcfg_pull_none>;
+ <0 RK_PA0 1 &pcfg_pull_none>;
};
test_clkout1: test-clkout1 {
rockchip,pins =
- <2 25 RK_FUNC_2 &pcfg_pull_none>;
+ <2 RK_PD1 2 &pcfg_pull_none>;
};
test_clkout2: test-clkout2 {
rockchip,pins =
- <0 8 RK_FUNC_3 &pcfg_pull_none>;
+ <0 RK_PB0 3 &pcfg_pull_none>;
};
};
tsadc {
otp_gpio: otp-gpio {
- rockchip,pins = <1 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
otp_out: otp-out {
- rockchip,pins = <1 6 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins =
- <2 16 RK_FUNC_1 &pcfg_pull_up>,
- <2 17 RK_FUNC_1 &pcfg_pull_none>;
+ <2 RK_PC0 1 &pcfg_pull_up>,
+ <2 RK_PC1 1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
rockchip,pins =
- <2 18 RK_FUNC_1 &pcfg_pull_none>;
+ <2 RK_PC2 1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
rockchip,pins =
- <2 19 RK_FUNC_1 &pcfg_pull_none>;
+ <2 RK_PC3 1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins =
- <3 12 RK_FUNC_2 &pcfg_pull_up>,
- <3 13 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PB4 2 &pcfg_pull_up>,
+ <3 RK_PB5 2 &pcfg_pull_none>;
};
};
uart2a {
uart2a_xfer: uart2a-xfer {
rockchip,pins =
- <4 8 RK_FUNC_2 &pcfg_pull_up>,
- <4 9 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PB0 2 &pcfg_pull_up>,
+ <4 RK_PB1 2 &pcfg_pull_none>;
};
};
uart2b {
uart2b_xfer: uart2b-xfer {
rockchip,pins =
- <4 16 RK_FUNC_2 &pcfg_pull_up>,
- <4 17 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PC0 2 &pcfg_pull_up>,
+ <4 RK_PC1 2 &pcfg_pull_none>;
};
};
uart2c {
uart2c_xfer: uart2c-xfer {
rockchip,pins =
- <4 19 RK_FUNC_1 &pcfg_pull_up>,
- <4 20 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC3 1 &pcfg_pull_up>,
+ <4 RK_PC4 1 &pcfg_pull_none>;
};
};
uart3 {
uart3_xfer: uart3-xfer {
rockchip,pins =
- <3 14 RK_FUNC_2 &pcfg_pull_up>,
- <3 15 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PB6 2 &pcfg_pull_up>,
+ <3 RK_PB7 2 &pcfg_pull_none>;
};
uart3_cts: uart3-cts {
rockchip,pins =
- <3 18 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PC0 2 &pcfg_pull_none>;
};
uart3_rts: uart3-rts {
rockchip,pins =
- <3 19 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PC1 2 &pcfg_pull_none>;
};
};
uart4 {
uart4_xfer: uart4-xfer {
rockchip,pins =
- <1 7 RK_FUNC_1 &pcfg_pull_up>,
- <1 8 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PA7 1 &pcfg_pull_up>,
+ <1 RK_PB0 1 &pcfg_pull_none>;
};
};
uarthdcp {
uarthdcp_xfer: uarthdcp-xfer {
rockchip,pins =
- <4 21 RK_FUNC_2 &pcfg_pull_up>,
- <4 22 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PC5 2 &pcfg_pull_up>,
+ <4 RK_PC6 2 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins =
- <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC2 1 &pcfg_pull_none>;
};
pwm0_pin_pull_down: pwm0-pin-pull-down {
rockchip,pins =
- <4 RK_PC2 RK_FUNC_1 &pcfg_pull_down>;
+ <4 RK_PC2 1 &pcfg_pull_down>;
};
vop0_pwm_pin: vop0-pwm-pin {
rockchip,pins =
- <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PC2 2 &pcfg_pull_none>;
};
vop1_pwm_pin: vop1-pwm-pin {
rockchip,pins =
- <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>;
+ <4 RK_PC2 3 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
rockchip,pins =
- <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC6 1 &pcfg_pull_none>;
};
pwm1_pin_pull_down: pwm1-pin-pull-down {
rockchip,pins =
- <4 RK_PC6 RK_FUNC_1 &pcfg_pull_down>;
+ <4 RK_PC6 1 &pcfg_pull_down>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
rockchip,pins =
- <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PC3 1 &pcfg_pull_none>;
};
pwm2_pin_pull_down: pwm2-pin-pull-down {
rockchip,pins =
- <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>;
+ <1 RK_PC3 1 &pcfg_pull_down>;
};
};
pwm3a {
pwm3a_pin: pwm3a-pin {
rockchip,pins =
- <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+ <0 RK_PA6 1 &pcfg_pull_none>;
};
};
pwm3b {
pwm3b_pin: pwm3b-pin {
rockchip,pins =
- <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PB6 1 &pcfg_pull_none>;
};
};
hdmi {
hdmi_i2c_xfer: hdmi-i2c-xfer {
rockchip,pins =
- <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>,
- <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>;
+ <4 RK_PC1 3 &pcfg_pull_none>,
+ <4 RK_PC0 3 &pcfg_pull_none>;
};
hdmi_cec: hdmi-cec {
rockchip,pins =
- <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC7 1 &pcfg_pull_none>;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 11cc67184fa9..2421ec71a201 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -89,6 +89,7 @@
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index cef81671f3ab..2a3b66547c6d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -110,6 +110,7 @@
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
index af4d86882a5c..1780ed237daf 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
@@ -21,6 +21,7 @@
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
};
/* Cleanup from RevA */
/delete-node/ phy@21;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index d4ad19a38c93..8f456146409f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -55,6 +55,7 @@
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 94cf5094df64..93ce7eb81498 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -111,6 +111,7 @@
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 460adc378295..8bb0001a026f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -106,6 +106,7 @@
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
};
};
diff --git a/include/dt-bindings/clock/xlnx,zynqmp-clk.h b/include/dt-bindings/clock/xlnx-zynqmp-clk.h
index 4aebe6e2049e..cdc4c0b9a374 100644
--- a/include/dt-bindings/clock/xlnx,zynqmp-clk.h
+++ b/include/dt-bindings/clock/xlnx-zynqmp-clk.h
@@ -54,14 +54,14 @@
#define IOU_SWITCH 42
#define GEM_TSU_REF 43
#define GEM_TSU 44
-#define GEM0_REF 45
-#define GEM1_REF 46
-#define GEM2_REF 47
-#define GEM3_REF 48
-#define GEM0_TX 49
-#define GEM1_TX 50
-#define GEM2_TX 51
-#define GEM3_TX 52
+#define GEM0_TX 45
+#define GEM1_TX 46
+#define GEM2_TX 47
+#define GEM3_TX 48
+#define GEM0_RX 49
+#define GEM1_RX 50
+#define GEM2_RX 51
+#define GEM3_RX 52
#define QSPI_REF 53
#define SDIO0_REF 54
#define SDIO1_REF 55
@@ -112,5 +112,15 @@
#define VPLL_POST_SRC 100
#define CAN0_MIO 101
#define CAN1_MIO 102
+#define ACPU_FULL 103
+#define GEM0_REF 104
+#define GEM1_REF 105
+#define GEM2_REF 106
+#define GEM3_REF 107
+#define GEM0_REF_UNG 108
+#define GEM1_REF_UNG 109
+#define GEM2_REF_UNG 110
+#define GEM3_REF_UNG 111
+#define LPD_WDT 112
#endif
diff --git a/include/dt-bindings/firmware/imx/rsrc.h b/include/dt-bindings/firmware/imx/rsrc.h
index 4481f2d60d65..4e61f6485097 100644
--- a/include/dt-bindings/firmware/imx/rsrc.h
+++ b/include/dt-bindings/firmware/imx/rsrc.h
@@ -36,15 +36,11 @@
#define IMX_SC_R_DC_0_BLIT1 20
#define IMX_SC_R_DC_0_BLIT2 21
#define IMX_SC_R_DC_0_BLIT_OUT 22
-#define IMX_SC_R_DC_0_CAPTURE0 23
-#define IMX_SC_R_DC_0_CAPTURE1 24
+#define IMX_SC_R_PERF 23
#define IMX_SC_R_DC_0_WARP 25
-#define IMX_SC_R_DC_0_INTEGRAL0 26
-#define IMX_SC_R_DC_0_INTEGRAL1 27
#define IMX_SC_R_DC_0_VIDEO0 28
#define IMX_SC_R_DC_0_VIDEO1 29
#define IMX_SC_R_DC_0_FRAC0 30
-#define IMX_SC_R_DC_0_FRAC1 31
#define IMX_SC_R_DC_0 32
#define IMX_SC_R_GPU_2_PID0 33
#define IMX_SC_R_DC_0_PLL_0 34
@@ -53,17 +49,11 @@
#define IMX_SC_R_DC_1_BLIT1 37
#define IMX_SC_R_DC_1_BLIT2 38
#define IMX_SC_R_DC_1_BLIT_OUT 39
-#define IMX_SC_R_DC_1_CAPTURE0 40
-#define IMX_SC_R_DC_1_CAPTURE1 41
#define IMX_SC_R_DC_1_WARP 42
-#define IMX_SC_R_DC_1_INTEGRAL0 43
-#define IMX_SC_R_DC_1_INTEGRAL1 44
#define IMX_SC_R_DC_1_VIDEO0 45
#define IMX_SC_R_DC_1_VIDEO1 46
#define IMX_SC_R_DC_1_FRAC0 47
-#define IMX_SC_R_DC_1_FRAC1 48
#define IMX_SC_R_DC_1 49
-#define IMX_SC_R_GPU_3_PID0 50
#define IMX_SC_R_DC_1_PLL_0 51
#define IMX_SC_R_DC_1_PLL_1 52
#define IMX_SC_R_SPI_0 53
@@ -303,8 +293,6 @@
#define IMX_SC_R_M4_0_UART 287
#define IMX_SC_R_M4_0_I2C 288
#define IMX_SC_R_M4_0_INTMUX 289
-#define IMX_SC_R_M4_0_SIM 290
-#define IMX_SC_R_M4_0_WDOG 291
#define IMX_SC_R_M4_0_MU_0B 292
#define IMX_SC_R_M4_0_MU_0A0 293
#define IMX_SC_R_M4_0_MU_0A1 294
@@ -323,8 +311,6 @@
#define IMX_SC_R_M4_1_UART 307
#define IMX_SC_R_M4_1_I2C 308
#define IMX_SC_R_M4_1_INTMUX 309
-#define IMX_SC_R_M4_1_SIM 310
-#define IMX_SC_R_M4_1_WDOG 311
#define IMX_SC_R_M4_1_MU_0B 312
#define IMX_SC_R_M4_1_MU_0A0 313
#define IMX_SC_R_M4_1_MU_0A1 314
@@ -337,7 +323,7 @@
#define IMX_SC_R_IRQSTR_SCU2 321
#define IMX_SC_R_IRQSTR_DSP 322
#define IMX_SC_R_ELCDIF_PLL 323
-#define IMX_SC_R_UNUSED6 324
+#define IMX_SC_R_OCRAM 324
#define IMX_SC_R_AUDIO_PLL_0 325
#define IMX_SC_R_PI_0 326
#define IMX_SC_R_PI_0_PWM_0 327
@@ -554,6 +540,11 @@
#define IMX_SC_R_VPU_MU_3 538
#define IMX_SC_R_VPU_ENC_1 539
#define IMX_SC_R_VPU 540
-#define IMX_SC_R_LAST 541
+#define IMX_SC_R_DMA_5_CH0 541
+#define IMX_SC_R_DMA_5_CH1 542
+#define IMX_SC_R_DMA_5_CH2 543
+#define IMX_SC_R_DMA_5_CH3 544
+#define IMX_SC_R_ATTESTATION 545
+#define IMX_SC_R_LAST 546
#endif /* __DT_BINDINGS_RSCRC_IMX_H */
diff --git a/include/dt-bindings/pinctrl/am33xx.h b/include/dt-bindings/pinctrl/am33xx.h
index 7d947a597220..17877e85980b 100644
--- a/include/dt-bindings/pinctrl/am33xx.h
+++ b/include/dt-bindings/pinctrl/am33xx.h
@@ -40,5 +40,133 @@
#undef PIN_OFF_INPUT_PULLDOWN
#undef PIN_OFF_WAKEUPENABLE
-#endif
+#define AM335X_PIN_OFFSET_MIN 0x0800U
+
+#define AM335X_PIN_GPMC_AD0 0x800
+#define AM335X_PIN_GPMC_AD1 0x804
+#define AM335X_PIN_GPMC_AD2 0x808
+#define AM335X_PIN_GPMC_AD3 0x80c
+#define AM335X_PIN_GPMC_AD4 0x810
+#define AM335X_PIN_GPMC_AD5 0x814
+#define AM335X_PIN_GPMC_AD6 0x818
+#define AM335X_PIN_GPMC_AD7 0x81c
+#define AM335X_PIN_GPMC_AD8 0x820
+#define AM335X_PIN_GPMC_AD9 0x824
+#define AM335X_PIN_GPMC_AD10 0x828
+#define AM335X_PIN_GPMC_AD11 0x82c
+#define AM335X_PIN_GPMC_AD12 0x830
+#define AM335X_PIN_GPMC_AD13 0x834
+#define AM335X_PIN_GPMC_AD14 0x838
+#define AM335X_PIN_GPMC_AD15 0x83c
+#define AM335X_PIN_GPMC_A0 0x840
+#define AM335X_PIN_GPMC_A1 0x844
+#define AM335X_PIN_GPMC_A2 0x848
+#define AM335X_PIN_GPMC_A3 0x84c
+#define AM335X_PIN_GPMC_A4 0x850
+#define AM335X_PIN_GPMC_A5 0x854
+#define AM335X_PIN_GPMC_A6 0x858
+#define AM335X_PIN_GPMC_A7 0x85c
+#define AM335X_PIN_GPMC_A8 0x860
+#define AM335X_PIN_GPMC_A9 0x864
+#define AM335X_PIN_GPMC_A10 0x868
+#define AM335X_PIN_GPMC_A11 0x86c
+#define AM335X_PIN_GPMC_WAIT0 0x870
+#define AM335X_PIN_GPMC_WPN 0x874
+#define AM335X_PIN_GPMC_BEN1 0x878
+#define AM335X_PIN_GPMC_CSN0 0x87c
+#define AM335X_PIN_GPMC_CSN1 0x880
+#define AM335X_PIN_GPMC_CSN2 0x884
+#define AM335X_PIN_GPMC_CSN3 0x888
+#define AM335X_PIN_GPMC_CLK 0x88c
+#define AM335X_PIN_GPMC_ADVN_ALE 0x890
+#define AM335X_PIN_GPMC_OEN_REN 0x894
+#define AM335X_PIN_GPMC_WEN 0x898
+#define AM335X_PIN_GPMC_BEN0_CLE 0x89c
+#define AM335X_PIN_LCD_DATA0 0x8a0
+#define AM335X_PIN_LCD_DATA1 0x8a4
+#define AM335X_PIN_LCD_DATA2 0x8a8
+#define AM335X_PIN_LCD_DATA3 0x8ac
+#define AM335X_PIN_LCD_DATA4 0x8b0
+#define AM335X_PIN_LCD_DATA5 0x8b4
+#define AM335X_PIN_LCD_DATA6 0x8b8
+#define AM335X_PIN_LCD_DATA7 0x8bc
+#define AM335X_PIN_LCD_DATA8 0x8c0
+#define AM335X_PIN_LCD_DATA9 0x8c4
+#define AM335X_PIN_LCD_DATA10 0x8c8
+#define AM335X_PIN_LCD_DATA11 0x8cc
+#define AM335X_PIN_LCD_DATA12 0x8d0
+#define AM335X_PIN_LCD_DATA13 0x8d4
+#define AM335X_PIN_LCD_DATA14 0x8d8
+#define AM335X_PIN_LCD_DATA15 0x8dc
+#define AM335X_PIN_LCD_VSYNC 0x8e0
+#define AM335X_PIN_LCD_HSYNC 0x8e4
+#define AM335X_PIN_LCD_PCLK 0x8e8
+#define AM335X_PIN_LCD_AC_BIAS_EN 0x8ec
+#define AM335X_PIN_MMC0_DAT3 0x8f0
+#define AM335X_PIN_MMC0_DAT2 0x8f4
+#define AM335X_PIN_MMC0_DAT1 0x8f8
+#define AM335X_PIN_MMC0_DAT0 0x8fc
+#define AM335X_PIN_MMC0_CLK 0x900
+#define AM335X_PIN_MMC0_CMD 0x904
+#define AM335X_PIN_MII1_COL 0x908
+#define AM335X_PIN_MII1_CRS 0x90c
+#define AM335X_PIN_MII1_RX_ER 0x910
+#define AM335X_PIN_MII1_TX_EN 0x914
+#define AM335X_PIN_MII1_RX_DV 0x918
+#define AM335X_PIN_MII1_TXD3 0x91c
+#define AM335X_PIN_MII1_TXD2 0x920
+#define AM335X_PIN_MII1_TXD1 0x924
+#define AM335X_PIN_MII1_TXD0 0x928
+#define AM335X_PIN_MII1_TX_CLK 0x92c
+#define AM335X_PIN_MII1_RX_CLK 0x930
+#define AM335X_PIN_MII1_RXD3 0x934
+#define AM335X_PIN_MII1_RXD2 0x938
+#define AM335X_PIN_MII1_RXD1 0x93c
+#define AM335X_PIN_MII1_RXD0 0x940
+#define AM335X_PIN_RMII1_REF_CLK 0x944
+#define AM335X_PIN_MDIO 0x948
+#define AM335X_PIN_MDC 0x94c
+#define AM335X_PIN_SPI0_SCLK 0x950
+#define AM335X_PIN_SPI0_D0 0x954
+#define AM335X_PIN_SPI0_D1 0x958
+#define AM335X_PIN_SPI0_CS0 0x95c
+#define AM335X_PIN_SPI0_CS1 0x960
+#define AM335X_PIN_ECAP0_IN_PWM0_OUT 0x964
+#define AM335X_PIN_UART0_CTSN 0x968
+#define AM335X_PIN_UART0_RTSN 0x96c
+#define AM335X_PIN_UART0_RXD 0x970
+#define AM335X_PIN_UART0_TXD 0x974
+#define AM335X_PIN_UART1_CTSN 0x978
+#define AM335X_PIN_UART1_RTSN 0x97c
+#define AM335X_PIN_UART1_RXD 0x980
+#define AM335X_PIN_UART1_TXD 0x984
+#define AM335X_PIN_I2C0_SDA 0x988
+#define AM335X_PIN_I2C0_SCL 0x98c
+#define AM335X_PIN_MCASP0_ACLKX 0x990
+#define AM335X_PIN_MCASP0_FSX 0x994
+#define AM335X_PIN_MCASP0_AXR0 0x998
+#define AM335X_PIN_MCASP0_AHCLKR 0x99c
+#define AM335X_PIN_MCASP0_ACLKR 0x9a0
+#define AM335X_PIN_MCASP0_FSR 0x9a4
+#define AM335X_PIN_MCASP0_AXR1 0x9a8
+#define AM335X_PIN_MCASP0_AHCLKX 0x9ac
+#define AM335X_PIN_XDMA_EVENT_INTR0 0x9b0
+#define AM335X_PIN_XDMA_EVENT_INTR1 0x9b4
+#define AM335X_PIN_WARMRSTN 0x9b8
+#define AM335X_PIN_NNMI 0x9c0
+#define AM335X_PIN_TMS 0x9d0
+#define AM335X_PIN_TDI 0x9d4
+#define AM335X_PIN_TDO 0x9d8
+#define AM335X_PIN_TCK 0x9dc
+#define AM335X_PIN_TRSTN 0x9e0
+#define AM335X_PIN_EMU0 0x9e4
+#define AM335X_PIN_EMU1 0x9e8
+#define AM335X_PIN_RTC_PWRONRSTN 0x9f8
+#define AM335X_PIN_PMIC_POWER_EN 0x9fc
+#define AM335X_PIN_EXT_WAKEUP 0xa00
+#define AM335X_PIN_USB0_DRVVBUS 0xa1c
+#define AM335X_PIN_USB1_DRVVBUS 0xa34
+#define AM335X_PIN_OFFSET_MAX 0x0a34U
+
+#endif
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 49b5dea2b388..625718042413 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -65,6 +65,7 @@
#define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
+#define AM33XX_PADCONF(pa, dir, mux) OMAP_IOPAD_OFFSET((pa), 0x0800) ((dir) | (mux))
/*
* Macros to allow using the offset from the padconf physical address
diff --git a/include/dt-bindings/power/r8a77965-sysc.h b/include/dt-bindings/power/r8a77965-sysc.h
index 05a4b5917314..de82d8a15ea1 100644
--- a/include/dt-bindings/power/r8a77965-sysc.h
+++ b/include/dt-bindings/power/r8a77965-sysc.h
@@ -21,7 +21,6 @@
#define R8A77965_PD_A3VC 14
#define R8A77965_PD_3DG_A 17
#define R8A77965_PD_3DG_B 18
-#define R8A77965_PD_A3IR 24
#define R8A77965_PD_A2VC1 26
/* Always-on power area */