summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt29
-rw-r--r--drivers/pinctrl/qcom/pinctrl-spmi-mpp.c157
2 files changed, 99 insertions, 87 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
index 0e4d4e62e220..b096d8351b8f 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
@@ -77,12 +77,9 @@ to specify in a pin configuration subnode:
Value type: <string>
Definition: Specify the alternative function to be configured for the
specified pins. Valid values are:
- "normal",
- "paired",
- "dtest1",
- "dtest2",
- "dtest3",
- "dtest4"
+ "digital",
+ "analog",
+ "sink"
- bias-disable:
Usage: optional
@@ -134,17 +131,11 @@ to specify in a pin configuration subnode:
defined in <dt-binding/pinctrl/qcom,pmic-mpp.h>
PMIC_MPP_AOUT_LVL_*
-- qcom,analog-mode:
+- qcom,dtest:
Usage: optional
- Value type: <none>
- Definition: Selects Analog mode of operation: combined with input-enable
- and/or output-high, output-low MPP could operate as
- Bidirectional Logic, Analog Input, Analog Output.
-
-- qcom,sink-mode:
- Usage: optional
- Value type: <u32> or <none>
- Definition: Selects sink mode of operation
+ Value type: <u32>
+ Definition: Selects which dtest rail to be routed in the various functions.
+ Valid values are 1-4
- qcom,amux-route:
Usage: optional
@@ -152,6 +143,10 @@ to specify in a pin configuration subnode:
Definition: Selects the source for analog input. Valid values are
defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6...
+- qcom,paired:
+ Usage: optional
+ Value type: <none>
+ Definition: Indicates that the pin should be operating in paired mode.
Example:
@@ -168,7 +163,7 @@ Example:
pm8841_default: default {
gpio {
pins = "mpp1", "mpp2", "mpp3", "mpp4";
- function = "normal";
+ function = "digital";
input-enable;
power-source = <PM8841_MPP_S3>;
};
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index e52a72348a67..e3be3ce2cada 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -95,13 +95,17 @@
#define PMIC_MPP_MODE_ANALOG_OUTPUT 5
#define PMIC_MPP_MODE_CURRENT_SINK 6
+#define PMIC_MPP_SELECTOR_NORMAL 0
+#define PMIC_MPP_SELECTOR_PAIRED 1
+#define PMIC_MPP_SELECTOR_DTEST_FIRST 4
+
#define PMIC_MPP_PHYSICAL_OFFSET 1
/* Qualcomm specific pin configurations */
#define PMIC_MPP_CONF_AMUX_ROUTE (PIN_CONFIG_END + 1)
-#define PMIC_MPP_CONF_ANALOG_MODE (PIN_CONFIG_END + 2)
-#define PMIC_MPP_CONF_SINK_MODE (PIN_CONFIG_END + 3)
-#define PMIC_MPP_CONF_ANALOG_LEVEL (PIN_CONFIG_END + 4)
+#define PMIC_MPP_CONF_ANALOG_LEVEL (PIN_CONFIG_END + 2)
+#define PMIC_MPP_CONF_DTEST_SELECTOR (PIN_CONFIG_END + 3)
+#define PMIC_MPP_CONF_PAIRED (PIN_CONFIG_END + 4)
/**
* struct pmic_mpp_pad - keep current MPP settings
@@ -111,9 +115,7 @@
* @out_value: Cached pin output value.
* @output_enabled: Set to true if MPP output logic is enabled.
* @input_enabled: Set to true if MPP input buffer logic is enabled.
- * @analog_mode: Set to true when MPP should operate in Analog Input, Analog
- * Output or Bidirectional Analog mode.
- * @sink_mode: Boolean indicating if ink mode is slected
+ * @paired: Pin operates in paired mode
* @num_sources: Number of power-sources supported by this MPP.
* @power_source: Current power-source used.
* @amux_input: Set the source for analog input.
@@ -121,6 +123,7 @@
* @pullup: Pullup resistor value. Valid in Bidirectional mode only.
* @function: See pmic_mpp_functions[].
* @drive_strength: Amount of current in sink mode
+ * @dtest: DTEST route selector
*/
struct pmic_mpp_pad {
u16 base;
@@ -129,8 +132,7 @@ struct pmic_mpp_pad {
bool out_value;
bool output_enabled;
bool input_enabled;
- bool analog_mode;
- bool sink_mode;
+ bool paired;
unsigned int num_sources;
unsigned int power_source;
unsigned int amux_input;
@@ -138,6 +140,7 @@ struct pmic_mpp_pad {
unsigned int pullup;
unsigned int function;
unsigned int drive_strength;
+ unsigned int dtest;
};
struct pmic_mpp_state {
@@ -150,16 +153,16 @@ struct pmic_mpp_state {
static const struct pinconf_generic_params pmic_mpp_bindings[] = {
{"qcom,amux-route", PMIC_MPP_CONF_AMUX_ROUTE, 0},
{"qcom,analog-level", PMIC_MPP_CONF_ANALOG_LEVEL, 0},
- {"qcom,analog-mode", PMIC_MPP_CONF_ANALOG_MODE, 0},
- {"qcom,sink-mode", PMIC_MPP_CONF_SINK_MODE, 0},
+ {"qcom,dtest", PMIC_MPP_CONF_DTEST_SELECTOR, 0},
+ {"qcom,paired", PMIC_MPP_CONF_PAIRED, 0},
};
#ifdef CONFIG_DEBUG_FS
static const struct pin_config_item pmic_conf_items[] = {
PCONFDUMP(PMIC_MPP_CONF_AMUX_ROUTE, "analog mux", NULL, true),
PCONFDUMP(PMIC_MPP_CONF_ANALOG_LEVEL, "analog level", NULL, true),
- PCONFDUMP(PMIC_MPP_CONF_ANALOG_MODE, "analog output", NULL, false),
- PCONFDUMP(PMIC_MPP_CONF_SINK_MODE, "sink mode", NULL, false),
+ PCONFDUMP(PMIC_MPP_CONF_DTEST_SELECTOR, "dtest", NULL, true),
+ PCONFDUMP(PMIC_MPP_CONF_PAIRED, "paired", NULL, false),
};
#endif
@@ -167,11 +170,12 @@ static const char *const pmic_mpp_groups[] = {
"mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", "mpp8",
};
+#define PMIC_MPP_DIGITAL 0
+#define PMIC_MPP_ANALOG 1
+#define PMIC_MPP_SINK 2
+
static const char *const pmic_mpp_functions[] = {
- PMIC_MPP_FUNC_NORMAL, PMIC_MPP_FUNC_PAIRED,
- "reserved1", "reserved2",
- PMIC_MPP_FUNC_DTEST1, PMIC_MPP_FUNC_DTEST2,
- PMIC_MPP_FUNC_DTEST3, PMIC_MPP_FUNC_DTEST4,
+ "digital", "analog", "sink"
};
static inline struct pmic_mpp_state *to_mpp_state(struct gpio_chip *chip)
@@ -260,31 +264,46 @@ static int pmic_mpp_get_function_groups(struct pinctrl_dev *pctldev,
static int pmic_mpp_write_mode_ctl(struct pmic_mpp_state *state,
struct pmic_mpp_pad *pad)
{
+ unsigned int mode;
+ unsigned int sel;
unsigned int val;
-
- if (pad->analog_mode) {
- val = PMIC_MPP_MODE_ANALOG_INPUT;
- if (pad->output_enabled) {
- if (pad->input_enabled)
- val = PMIC_MPP_MODE_ANALOG_BIDIR;
- else
- val = PMIC_MPP_MODE_ANALOG_OUTPUT;
- }
- } else if (pad->sink_mode) {
- val = PMIC_MPP_MODE_CURRENT_SINK;
- } else {
- val = PMIC_MPP_MODE_DIGITAL_INPUT;
- if (pad->output_enabled) {
- if (pad->input_enabled)
- val = PMIC_MPP_MODE_DIGITAL_BIDIR;
- else
- val = PMIC_MPP_MODE_DIGITAL_OUTPUT;
- }
+ unsigned int en;
+
+ switch (pad->function) {
+ case PMIC_MPP_ANALOG:
+ if (pad->input_enabled && pad->output_enabled)
+ mode = PMIC_MPP_MODE_ANALOG_BIDIR;
+ else if (pad->input_enabled)
+ mode = PMIC_MPP_MODE_ANALOG_INPUT;
+ else
+ mode = PMIC_MPP_MODE_ANALOG_OUTPUT;
+ break;
+ case PMIC_MPP_DIGITAL:
+ if (pad->input_enabled && pad->output_enabled)
+ mode = PMIC_MPP_MODE_DIGITAL_BIDIR;
+ else if (pad->input_enabled)
+ mode = PMIC_MPP_MODE_DIGITAL_INPUT;
+ else
+ mode = PMIC_MPP_MODE_DIGITAL_OUTPUT;
+ break;
+ case PMIC_MPP_SINK:
+ default:
+ mode = PMIC_MPP_MODE_CURRENT_SINK;
+ break;
}
- val = val << PMIC_MPP_REG_MODE_DIR_SHIFT;
- val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
- val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK;
+ if (pad->dtest)
+ sel = PMIC_MPP_SELECTOR_DTEST_FIRST + pad->dtest - 1;
+ else if (pad->paired)
+ sel = PMIC_MPP_SELECTOR_PAIRED;
+ else
+ sel = PMIC_MPP_SELECTOR_NORMAL;
+
+ en = !!pad->out_value;
+
+ val = mode << PMIC_MPP_REG_MODE_DIR_SHIFT |
+ sel << PMIC_MPP_REG_MODE_FUNCTION_SHIFT |
+ en;
return pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
}
@@ -358,21 +377,21 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
case PIN_CONFIG_OUTPUT:
arg = pad->out_value;
break;
+ case PMIC_MPP_CONF_DTEST_SELECTOR:
+ arg = pad->dtest;
+ break;
case PMIC_MPP_CONF_AMUX_ROUTE:
arg = pad->amux_input;
break;
+ case PMIC_MPP_CONF_PAIRED:
+ arg = pad->paired;
+ break;
case PIN_CONFIG_DRIVE_STRENGTH:
arg = pad->drive_strength;
break;
case PMIC_MPP_CONF_ANALOG_LEVEL:
arg = pad->aout_level;
break;
- case PMIC_MPP_CONF_ANALOG_MODE:
- arg = pad->analog_mode;
- break;
- case PMIC_MPP_CONF_SINK_MODE:
- arg = pad->sink_mode;
- break;
default:
return -EINVAL;
}
@@ -434,6 +453,9 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
pad->output_enabled = true;
pad->out_value = arg;
break;
+ case PMIC_MPP_CONF_DTEST_SELECTOR:
+ pad->dtest = arg;
+ break;
case PIN_CONFIG_DRIVE_STRENGTH:
arg = pad->drive_strength;
break;
@@ -445,11 +467,8 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
case PMIC_MPP_CONF_ANALOG_LEVEL:
pad->aout_level = arg;
break;
- case PMIC_MPP_CONF_ANALOG_MODE:
- pad->analog_mode = !!arg;
- break;
- case PMIC_MPP_CONF_SINK_MODE:
- pad->sink_mode = !!arg;
+ case PMIC_MPP_CONF_PAIRED:
+ pad->paired = !!arg;
break;
default:
return -EINVAL;
@@ -498,10 +517,6 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
"0.6kOhm", "10kOhm", "30kOhm", "Disabled"
};
- static const char *const modes[] = {
- "digital", "analog", "sink"
- };
-
pad = pctldev->desc->pins[pin].drv_data;
seq_printf(s, " mpp%-2d:", pin + PMIC_MPP_PHYSICAL_OFFSET);
@@ -520,12 +535,15 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
}
seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
- seq_printf(s, " %-7s", modes[pad->analog_mode ? 1 : (pad->sink_mode ? 2 : 0)]);
seq_printf(s, " %-7s", pmic_mpp_functions[pad->function]);
seq_printf(s, " vin-%d", pad->power_source);
seq_printf(s, " %d", pad->aout_level);
seq_printf(s, " %-8s", biases[pad->pullup]);
seq_printf(s, " %-4s", pad->out_value ? "high" : "low");
+ if (pad->dtest)
+ seq_printf(s, " dtest%d", pad->dtest);
+ if (pad->paired)
+ seq_puts(s, " paired");
}
}
@@ -646,6 +664,7 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state,
struct pmic_mpp_pad *pad)
{
int type, subtype, val, dir;
+ unsigned int sel;
type = pmic_mpp_read(state, pad, PMIC_MPP_REG_TYPE);
if (type < 0)
@@ -691,52 +710,50 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state,
case PMIC_MPP_MODE_DIGITAL_INPUT:
pad->input_enabled = true;
pad->output_enabled = false;
- pad->analog_mode = false;
- pad->sink_mode = false;
+ pad->function = PMIC_MPP_DIGITAL;
break;
case PMIC_MPP_MODE_DIGITAL_OUTPUT:
pad->input_enabled = false;
pad->output_enabled = true;
- pad->analog_mode = false;
- pad->sink_mode = false;
+ pad->function = PMIC_MPP_DIGITAL;
break;
case PMIC_MPP_MODE_DIGITAL_BIDIR:
pad->input_enabled = true;
pad->output_enabled = true;
- pad->analog_mode = false;
- pad->sink_mode = false;
+ pad->function = PMIC_MPP_DIGITAL;
break;
case PMIC_MPP_MODE_ANALOG_BIDIR:
pad->input_enabled = true;
pad->output_enabled = true;
- pad->analog_mode = true;
- pad->sink_mode = false;
+ pad->function = PMIC_MPP_ANALOG;
break;
case PMIC_MPP_MODE_ANALOG_INPUT:
pad->input_enabled = true;
pad->output_enabled = false;
- pad->analog_mode = true;
- pad->sink_mode = false;
+ pad->function = PMIC_MPP_ANALOG;
break;
case PMIC_MPP_MODE_ANALOG_OUTPUT:
pad->input_enabled = false;
pad->output_enabled = true;
- pad->analog_mode = true;
- pad->sink_mode = false;
+ pad->function = PMIC_MPP_ANALOG;
break;
case PMIC_MPP_MODE_CURRENT_SINK:
pad->input_enabled = false;
pad->output_enabled = true;
- pad->analog_mode = false;
- pad->sink_mode = true;
+ pad->function = PMIC_MPP_SINK;
break;
default:
dev_err(state->dev, "unknown MPP direction\n");
return -ENODEV;
}
- pad->function = val >> PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
- pad->function &= PMIC_MPP_REG_MODE_FUNCTION_MASK;
+ sel = val >> PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
+ sel &= PMIC_MPP_REG_MODE_FUNCTION_MASK;
+
+ if (sel >= PMIC_MPP_SELECTOR_DTEST_FIRST)
+ pad->dtest = sel + 1;
+ else if (sel == PMIC_MPP_SELECTOR_PAIRED)
+ pad->paired = true;
val = pmic_mpp_read(state, pad, PMIC_MPP_REG_DIG_VIN_CTL);
if (val < 0)
generated by cgit (git 2.34.1) at 2024-05-30 05:05:51 +0000