summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-class-mtd8
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmi-nand.txt5
-rw-r--r--Documentation/devicetree/bindings/mtd/mtk-nand.txt24
-rw-r--r--Documentation/devicetree/bindings/mtd/partition.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt42
-rw-r--r--Documentation/devicetree/bindings/mtd/sunxi-nand.txt2
-rw-r--r--MAINTAINERS8
-rw-r--r--drivers/mtd/bcm47xxpart.c29
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c62
-rw-r--r--drivers/mtd/chips/cfi_probe.c42
-rw-r--r--drivers/mtd/cmdlinepart.c5
-rw-r--r--drivers/mtd/devices/docg3.c3
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c2
-rw-r--r--drivers/mtd/inftlmount.c23
-rw-r--r--drivers/mtd/maps/pismo.c1
-rw-r--r--drivers/mtd/mtdcore.c24
-rw-r--r--drivers/mtd/mtdcore.h1
-rw-r--r--drivers/mtd/mtdpart.c44
-rw-r--r--drivers/mtd/nand/onenand/samsung.c6
-rw-r--r--drivers/mtd/nand/raw/Kconfig8
-rw-r--r--drivers/mtd/nand/raw/davinci_nand.c25
-rw-r--r--drivers/mtd/nand/raw/diskonchip.c4
-rw-r--r--drivers/mtd/nand/raw/fsl_elbc_nand.c13
-rw-r--r--drivers/mtd/nand/raw/fsl_ifc_nand.c29
-rw-r--r--drivers/mtd/nand/raw/fsmc_nand.c27
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c54
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c188
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h25
-rw-r--r--drivers/mtd/nand/raw/hisi504_nand.c35
-rw-r--r--drivers/mtd/nand/raw/lpc32xx_mlc.c38
-rw-r--r--drivers/mtd/nand/raw/lpc32xx_slc.c26
-rw-r--r--drivers/mtd/nand/raw/mtk_ecc.c7
-rw-r--r--drivers/mtd/nand/raw/mtk_nand.c10
-rw-r--r--drivers/mtd/nand/raw/nand_base.c89
-rw-r--r--drivers/mtd/nand/raw/sunxi_nand.c91
-rw-r--r--drivers/mtd/nftlmount.c23
-rw-r--r--drivers/mtd/spi-nor/Kconfig6
-rw-r--r--drivers/mtd/spi-nor/cadence-quadspi.c96
-rw-r--r--drivers/mtd/spi-nor/fsl-quadspi.c15
-rw-r--r--drivers/mtd/spi-nor/hisi-sfc.c12
-rw-r--r--drivers/mtd/spi-nor/intel-spi.c80
-rw-r--r--drivers/mtd/spi-nor/spi-nor.c33
-rw-r--r--drivers/mtd/spi-nor/stm32-quadspi.c2
-rw-r--r--include/linux/mtd/nand.h3
-rw-r--r--include/linux/mtd/rawnand.h35
-rw-r--r--include/linux/mtd/spi-nor.h2
46 files changed, 773 insertions, 536 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index f34e592301d1..3bc7c0a95c92 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -232,3 +232,11 @@ Description:
of the parent (another partition or a flash device) in bytes.
This attribute is absent on flash devices, so it can be used
to distinguish them from partitions.
+
+What: /sys/class/mtd/mtdX/oobavail
+Date: April 2018
+KernelVersion: 4.16
+Contact: linux-mtd@lists.infradead.org
+Description:
+ Number of bytes available for a client to place data into
+ the out of band area.
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index b289ef3c1b7e..393588385c6e 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -47,6 +47,11 @@ Optional properties:
partitions written from Linux with this feature
turned on may not be accessible by the BootROM
code.
+ - nand-ecc-strength: integer representing the number of bits to correct
+ per ECC step. Needs to be a multiple of 2.
+ - nand-ecc-step-size: integer representing the number of data bytes
+ that are covered by a single ECC step. The driver
+ supports 512 and 1024.
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
index c5ba6a4ba1f2..4d3ec5e4ff8a 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
@@ -48,14 +48,19 @@ Optional:
- nand-on-flash-bbt: Store BBT on NAND Flash.
- nand-ecc-mode: the NAND ecc mode (check driver for supported modes)
- nand-ecc-step-size: Number of data bytes covered by a single ECC step.
- valid values: 512 and 1024.
+ valid values:
+ 512 and 1024 on mt2701 and mt2712.
+ 512 only on mt7622.
1024 is recommended for large page NANDs.
- nand-ecc-strength: Number of bits to correct per ECC step.
- The valid values that the controller supports are: 4, 6,
- 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 44,
- 48, 52, 56, 60.
+ The valid values that each controller supports:
+ mt2701: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
+ 32, 36, 40, 44, 48, 52, 56, 60.
+ mt2712: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
+ 32, 36, 40, 44, 48, 52, 56, 60, 68, 72, 80.
+ mt7622: 4, 6, 8, 10, 12, 14, 16.
The strength should be calculated as follows:
- E = (S - F) * 8 / 14
+ E = (S - F) * 8 / B
S = O / (P / Q)
E : nand-ecc-strength.
S : spare size per sector.
@@ -64,6 +69,15 @@ Optional:
O : oob size.
P : page size.
Q : nand-ecc-step-size.
+ B : number of parity bits needed to correct
+ 1 bitflip.
+ According to MTK NAND controller design,
+ this number depends on max ecc step size
+ that MTK NAND controller supports.
+ If max ecc step size supported is 1024,
+ then it should be always 14. And if max
+ ecc step size is 512, then it should be
+ always 13.
If the result does not match any one of the listed
choices above, please select the smaller valid value from
the list.
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
index 36f3b769a626..a8f382642ba9 100644
--- a/Documentation/devicetree/bindings/mtd/partition.txt
+++ b/Documentation/devicetree/bindings/mtd/partition.txt
@@ -14,7 +14,7 @@ method is used for a given flash device. To describe the method there should be
a subnode of the flash device that is named 'partitions'. It must have a
'compatible' property, which is used to identify the method to use.
-We currently only document a binding for fixed layouts.
+Available bindings are listed in the "partitions" subdirectory.
Fixed Partitions
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt
new file mode 100644
index 000000000000..1d61a029395e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt
@@ -0,0 +1,42 @@
+Broadcom BCM47xx Partitions
+===========================
+
+Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in
+home routers. Their BCM947xx boards using CFE bootloader have several partitions
+without any on-flash partition table. On some devices their sizes and/or
+meanings can also vary so fixed partitioning can't be used.
+
+Discovering partitions on these devices is possible thanks to having a special
+header and/or magic signature at the beginning of each of them. They are also
+block aligned which is important for determinig a size.
+
+Most of partitions use ASCII text based magic for determining a type. More
+complex partitions (like TRX with its HDR0 magic) may include extra header
+containing some details, including a length.
+
+A list of supported partitions includes:
+1) Bootloader with Broadcom's CFE (Common Firmware Environment)
+2) NVRAM with configuration/calibration data
+3) Device manufacturer's data with some default values (e.g. SSIDs)
+4) TRX firmware container which can hold up to 4 subpartitions
+5) Backup TRX firmware used after failed upgrade
+
+As mentioned earlier, role of some partitions may depend on extra configuration.
+For example both: main firmware and backup firmware use the same TRX format with
+the same header. To distinguish currently used firmware a CFE's environment
+variable "bootpartition" is used.
+
+
+Devices using Broadcom partitions described above should should have flash node
+with a subnode named "partitions" using following properties:
+
+Required properties:
+- compatible : (required) must be "brcm,bcm947xx-cfe-partitions"
+
+Example:
+
+flash@0 {
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
index 0734f03bf3d3..dcd5a5d80dc0 100644
--- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
@@ -22,8 +22,6 @@ Optional properties:
- reset : phandle + reset specifier pair
- reset-names : must contain "ahb"
- allwinner,rb : shall contain the native Ready/Busy ids.
- or
-- rb-gpios : shall contain the gpios used as R/B pins.
- nand-ecc-mode : one of the supported ECC modes ("hw", "soft", "soft_bch" or
"none")
diff --git a/MAINTAINERS b/MAINTAINERS
index c9ac159fb023..3838c94a0d47 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9022,6 +9022,13 @@ L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/mediatek/mt7601u/
+MEDIATEK NAND CONTROLLER DRIVER
+M: Xiaolei Li <xiaolei.li@mediatek.com>
+L: linux-mtd@lists.infradead.org
+S: Maintained
+F: drivers/mtd/nand/raw/mtk_*
+F: Documentation/devicetree/bindings/mtd/mtk-nand.txt
+
MEDIATEK RANDOM NUMBER GENERATOR SUPPORT
M: Sean Wang <sean.wang@mediatek.com>
S: Maintained
@@ -9666,6 +9673,7 @@ F: drivers/net/ethernet/myricom/myri10ge/
NAND FLASH SUBSYSTEM
M: Boris Brezillon <boris.brezillon@bootlin.com>
+M: Miquel Raynal <miquel.raynal@bootlin.com>
R: Richard Weinberger <richard@nod.at>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index fe2581d9d882..0f93d2239352 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -186,6 +186,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
/* TRX */
if (buf[0x000 / 4] == TRX_MAGIC) {
struct trx_header *trx;
+ uint32_t last_subpart;
+ uint32_t trx_size;
if (trx_num >= ARRAY_SIZE(trx_parts))
pr_warn("No enough space to store another TRX found at 0x%X\n",
@@ -195,11 +197,23 @@ static int bcm47xxpart_parse(struct mtd_info *master,
bcm47xxpart_add_part(&parts[curr_part++], "firmware",
offset, 0);
- /* Jump to the end of TRX */
+ /*
+ * Try to find TRX size. The "length" field isn't fully
+ * reliable as it could be decreased to make CRC32 cover
+ * only part of TRX data. It's commonly used as checksum
+ * can't cover e.g. ever-changing rootfs partition.
+ * Use offsets as helpers for assuming min TRX size.
+ */
trx = (struct trx_header *)buf;
- offset = roundup(offset + trx->length, blocksize);
- /* Next loop iteration will increase the offset */
- offset -= blocksize;
+ last_subpart = max3(trx->offset[0], trx->offset[1],
+ trx->offset[2]);
+ trx_size = max(trx->length, last_subpart + blocksize);
+
+ /*
+ * Skip the TRX data. Decrease offset by block size as
+ * the next loop iteration will increase it.
+ */
+ offset += roundup(trx_size, blocksize) - blocksize;
continue;
}
@@ -290,9 +304,16 @@ static int bcm47xxpart_parse(struct mtd_info *master,
return curr_part;
};
+static const struct of_device_id bcm47xxpart_of_match_table[] = {
+ { .compatible = "brcm,bcm947xx-cfe-partitions" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm47xxpart_of_match_table);
+
static struct mtd_part_parser bcm47xxpart_mtd_parser = {
.parse_fn = bcm47xxpart_parse,
.name = "bcm47xxpart",
+ .of_match_table = bcm47xxpart_of_match_table,
};
module_mtd_part_parser(bcm47xxpart_mtd_parser);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 692902df2598..7c889eca9ab0 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -42,10 +42,10 @@
#define AMD_BOOTLOC_BUG
#define FORCE_WORD_WRITE 0
-#define MAX_WORD_RETRIES 3
+#define MAX_RETRIES 3
-#define SST49LF004B 0x0060
-#define SST49LF040B 0x0050
+#define SST49LF004B 0x0060
+#define SST49LF040B 0x0050
#define SST49LF008A 0x005a
#define AT49BV6416 0x00d6
@@ -207,7 +207,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd)
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
if (cfi->cfiq->BufWriteTimeoutTyp) {
- pr_debug("Using buffer write method\n" );
+ pr_debug("Using buffer write method\n");
mtd->_write = cfi_amdstd_write_buffers;
}
}
@@ -1563,7 +1563,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
* depending of the conditions. The ' + 1' is to avoid having a
* timeout of 0 jiffies if HZ is smaller than 1000.
*/
- unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
+ unsigned long uWriteTimeout = (HZ / 1000) + 1;
int ret = 0;
map_word oldd;
int retry_cnt = 0;
@@ -1578,7 +1578,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
}
pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
- __func__, adr, datum.x[0] );
+ __func__, adr, datum.x[0]);
if (mode == FL_OTP_WRITE)
otp_enter(map, chip, adr, map_bankwidth(map));
@@ -1644,10 +1644,10 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
/* Did we succeed? */
if (!chip_good(map, adr, datum)) {
/* reset on all failures. */
- map_write( map, CMD(0xF0), chip->start );
+ map_write(map, CMD(0xF0), chip->start);
/* FIXME - should have reset delay before continuing */
- if (++retry_cnt <= MAX_WORD_RETRIES)
+ if (++retry_cnt <= MAX_RETRIES)
goto retry;
ret = -EIO;
@@ -1822,7 +1822,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
datum = map_word_load(map, buf);
pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
- __func__, adr, datum.x[0] );
+ __func__, adr, datum.x[0]);
XIP_INVAL_CACHED_RANGE(map, adr, len);
ENABLE_VPP(map);
@@ -1880,7 +1880,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
if (time_after(jiffies, timeo) && !chip_ready(map, adr))
break;
- if (chip_ready(map, adr)) {
+ if (chip_good(map, adr, datum)) {
xip_enable(map, chip, adr);
goto op_done;
}
@@ -2106,7 +2106,7 @@ retry:
map_write(map, CMD(0xF0), chip->start);
/* FIXME - should have reset delay before continuing */
- if (++retry_cnt <= MAX_WORD_RETRIES)
+ if (++retry_cnt <= MAX_RETRIES)
goto retry;
ret = -EIO;
@@ -2241,6 +2241,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
unsigned long int adr;
DECLARE_WAITQUEUE(wait, current);
int ret = 0;
+ int retry_cnt = 0;
adr = cfi->addr_unlock1;
@@ -2252,12 +2253,13 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
}
pr_debug("MTD %s(): ERASE 0x%.8lx\n",
- __func__, chip->start );
+ __func__, chip->start);
XIP_INVAL_CACHED_RANGE(map, adr, map->size);
ENABLE_VPP(map);
xip_disable(map, chip, adr);
+ retry:
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
@@ -2294,12 +2296,13 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr))
+ if (chip_good(map, adr, map_word_ff(map)))
break;
if (time_after(jiffies, timeo)) {
printk(KERN_WARNING "MTD %s(): software timeout\n",
- __func__ );
+ __func__);
+ ret = -EIO;
break;
}
@@ -2307,12 +2310,15 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
UDELAY(map, chip, adr, 1000000/HZ);
}
/* Did we succeed? */
- if (!chip_good(map, adr, map_word_ff(map))) {
+ if (ret) {
/* reset on all failures. */
- map_write( map, CMD(0xF0), chip->start );
+ map_write(map, CMD(0xF0), chip->start);
/* FIXME - should have reset delay before continuing */
- ret = -EIO;
+ if (++retry_cnt <= MAX_RETRIES) {
+ ret = 0;
+ goto retry;
+ }
}
chip->state = FL_READY;
@@ -2331,6 +2337,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
unsigned long timeo = jiffies + HZ;
DECLARE_WAITQUEUE(wait, current);
int ret = 0;
+ int retry_cnt = 0;
adr += chip->start;
@@ -2342,12 +2349,13 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
}
pr_debug("MTD %s(): ERASE 0x%.8lx\n",
- __func__, adr );
+ __func__, adr);
XIP_INVAL_CACHED_RANGE(map, adr, len);
ENABLE_VPP(map);
xip_disable(map, chip, adr);
+ retry:
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
@@ -2384,15 +2392,13 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr)) {
- xip_enable(map, chip, adr);
+ if (chip_good(map, adr, map_word_ff(map)))
break;
- }
if (time_after(jiffies, timeo)) {
- xip_enable(map, chip, adr);
printk(KERN_WARNING "MTD %s(): software timeout\n",
- __func__ );
+ __func__);
+ ret = -EIO;
break;
}
@@ -2400,15 +2406,19 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
UDELAY(map, chip, adr, 1000000/HZ);
}
/* Did we succeed? */
- if (!chip_good(map, adr, map_word_ff(map))) {
+ if (ret) {
/* reset on all failures. */
- map_write( map, CMD(0xF0), chip->start );
+ map_write(map, CMD(0xF0), chip->start);
/* FIXME - should have reset delay before continuing */
- ret = -EIO;
+ if (++retry_cnt <= MAX_RETRIES) {
+ ret = 0;
+ goto retry;
+ }
}
chip->state = FL_READY;
+ xip_enable(map, chip, adr);
DISABLE_VPP(map);
put_chip(map, chip, adr);
mutex_unlock(&chip->mutex);
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index e8d0164498b0..cf426956454c 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -63,6 +63,30 @@ do { \
#endif
+/*
+ * This fixup occurs immediately after reading the CFI structure and can affect
+ * the number of chips detected, unlike cfi_fixup, which occurs after an
+ * mtd_info structure has been created for the chip.
+ */
+struct cfi_early_fixup {
+ uint16_t mfr;
+ uint16_t id;
+ void (*fixup)(struct cfi_private *cfi);
+};
+
+static void cfi_early_fixup(struct cfi_private *cfi,
+ const struct cfi_early_fixup *fixups)
+{
+ const struct cfi_early_fixup *f;
+
+ for (f = fixups; f->fixup; f++) {
+ if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
+ ((f->id == CFI_ID_ANY) || (f->id == cfi->id))) {
+ f->fixup(cfi);
+ }
+ }
+}
+
/* check for QRY.
in: interleave,type,mode
ret: table index, <0 for error
@@ -151,6 +175,22 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
return 1;
}
+static void fixup_s70gl02gs_chips(struct cfi_private *cfi)
+{
+ /*
+ * S70GL02GS flash reports a single 256 MiB chip, but is really made up
+ * of two 128 MiB chips with 1024 sectors each.
+ */
+ cfi->cfiq->DevSize = 27;
+ cfi->cfiq->EraseRegionInfo[0] = 0x20003ff;
+ pr_warn("Bad S70GL02GS CFI data; adjust to detect 2 chips\n");
+}
+
+static const struct cfi_early_fixup cfi_early_fixup_table[] = {
+ { CFI_MFR_AMD, 0x4801, fixup_s70gl02gs_chips },
+ { },
+};
+
static int __xipram cfi_chip_setup(struct map_info *map,
struct cfi_private *cfi)
{
@@ -235,6 +275,8 @@ static int __xipram cfi_chip_setup(struct map_info *map,
cfi_qry_mode_off(base, map, cfi);
xip_allowed(base, map);
+ cfi_early_fixup(cfi, cfi_early_fixup_table);
+
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n",
map->name, cfi->interleave, cfi->device_type*8, base,
map->bankwidth*8, cfi->mfr, cfi->id);
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index fbd5affc0acf..3ea44cff9b75 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -190,7 +190,10 @@ static struct mtd_partition * newpart(char *s,
extra_mem = (unsigned char *)(parts + *num_parts);
}
- /* enter this partition (offset will be calculated later if it is zero at this point) */
+ /*
+ * enter this partition (offset will be calculated later if it is
+ * OFFSET_CONTINUOUS at this point)
+ */
parts[this_part].size = size;
parts[this_part].offset = offset;
parts[this_part].mask_flags = mask_flags;
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index c594fe5eac08..802d8f159e90 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1470,8 +1470,7 @@ static struct docg3 *sysfs_dev2docg3(struct device *dev,
struct device_attribute *attr)
{
int floor;
- struct platform_device *pdev = to_platform_device(dev);
- struct mtd_info **docg3_floors = platform_get_drvdata(pdev);
+ struct mtd_info **docg3_floors = dev_get_drvdata(dev);
floor = attr->attr.name[1] - '0';
if (floor < 0 || floor >= DOC_MAX_NBFLOORS)
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index aaaeaae01e1d..3a6f450d1093 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -140,7 +140,7 @@ static int dataflash_waitready(struct spi_device *spi)
if (status & (1 << 7)) /* RDY/nBSY */
return status;
- msleep(3);
+ usleep_range(3000, 4000);
}
}
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index aab4f68bd36f..2d598412972d 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -334,28 +334,37 @@ static int memcmpb(void *a, int c, int n)
static int check_free_sectors(struct INFTLrecord *inftl, unsigned int address,
int len, int check_oob)
{
- u8 buf[SECTORSIZE + inftl->mbd.mtd->oobsize];
struct mtd_info *mtd = inftl->mbd.mtd;
size_t retlen;
- int i;
+ int i, ret;
+ u8 *buf;
+
+ buf = kmalloc(SECTORSIZE + mtd->oobsize, GFP_KERNEL);
+ if (!buf)
+ return -1;
+ ret = -1;
for (i = 0; i < len; i += SECTORSIZE) {
if (mtd_read(mtd, address, SECTORSIZE, &retlen, buf))
- return -1;
+ goto out;
if (memcmpb(buf, 0xff, SECTORSIZE) != 0)
- return -1;
+ goto out;
if (check_oob) {
if(inftl_read_oob(mtd, address, mtd->oobsize,
&retlen, &buf[SECTORSIZE]) < 0)
- return -1;
+ goto out;
if (memcmpb(buf + SECTORSIZE, 0xff, mtd->oobsize) != 0)
- return -1;
+ goto out;
}
address += SECTORSIZE;
}
- return 0;
+ ret = 0;
+
+out:
+ kfree(buf);
+ return ret;
}
/*
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index dc6df9abea0b..c065d7995c0a 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -265,7 +265,6 @@ MODULE_DEVICE_TABLE(i2c, pismo_id);
static struct i2c_driver pismo_driver = {
.driver = {
.name = "pismo",
- .owner = THIS_MODULE,
},
.probe = pismo_probe,
.remove = pismo_remove,
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 64a1fcaafd9a..42395df06be9 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -210,6 +210,15 @@ static ssize_t mtd_oobsize_show(struct device *dev,
}
static DEVICE_ATTR(oobsize, S_IRUGO, mtd_oobsize_show, NULL);
+static ssize_t mtd_oobavail_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", mtd->oobavail);
+}
+static DEVICE_ATTR(oobavail, S_IRUGO, mtd_oobavail_show, NULL);
+
static ssize_t mtd_numeraseregions_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -327,6 +336,7 @@ static struct attribute *mtd_attrs[] = {
&dev_attr_writesize.attr,
&dev_attr_subpagesize.attr,
&dev_attr_oobsize.attr,
+ &dev_attr_oobavail.attr,
&dev_attr_numeraseregions.attr,
&dev_attr_name.attr,
&dev_attr_ecc_strength.attr,
@@ -690,7 +700,6 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
const struct mtd_partition *parts,
int nr_parts)
{
- struct mtd_partitions parsed = { };
int ret;
mtd_set_dev_defaults(mtd);
@@ -702,13 +711,10 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
}
/* Prefer parsed partitions over driver-provided fallback */
- ret = parse_mtd_partitions(mtd, types, &parsed, parser_data);
- if (!ret && parsed.nr_parts) {
- parts = parsed.parts;
- nr_parts = parsed.nr_parts;
- }
-
- if (nr_parts)
+ ret = parse_mtd_partitions(mtd, types, parser_data);
+ if (ret > 0)
+ ret = 0;
+ else if (nr_parts)
ret = add_mtd_partitions(mtd, parts, nr_parts);
else if (!device_is_registered(&mtd->dev))
ret = add_mtd_device(mtd);
@@ -734,8 +740,6 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
}
out:
- /* Cleanup any parsed partitions */
- mtd_part_parser_cleanup(&parsed);
if (ret && device_is_registered(&mtd->dev))
del_mtd_device(mtd);
diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
index 37accfd0400e..9887bda317cd 100644
--- a/drivers/mtd/mtdcore.h
+++ b/drivers/mtd/mtdcore.h
@@ -15,7 +15,6 @@ int del_mtd_partitions(struct mtd_info *);
struct mtd_partitions;
int parse_mtd_partitions(struct mtd_info *master, const char * const *types,
- struct mtd_partitions *pparts,
struct mtd_part_parser_data *data);
void mtd_part_parser_cleanup(struct mtd_partitions *parts);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 023516a63276..f8d3a015cdad 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -335,20 +335,7 @@ static inline void free_partition(struct mtd_part *p)
*/
static int mtd_parse_part(struct mtd_part *slave, const char *const *types)
{
- struct mtd_partitions parsed;
- int err;
-
- err = parse_mtd_partitions(&slave->mtd, types, &parsed, NULL);
- if (err)
- return err;
- else if (!parsed.nr_parts)
- return -ENOENT;
-
- err = add_mtd_partitions(&slave->mtd, parsed.parts, parsed.nr_parts);
-
- mtd_part_parser_cleanup(&parsed);
-
- return err;
+ return parse_mtd_partitions(&slave->mtd, types, NULL);
}
static struct mtd_part *allocate_partition(struct mtd_info *parent,
@@ -933,30 +920,27 @@ static int mtd_part_of_parse(struct mtd_info *master,
}
/**
- * parse_mtd_partitions - parse MTD partitions
+ * parse_mtd_partitions - parse and register MTD partitions
+ *
* @master: the master partition (describes whole MTD device)
* @types: names of partition parsers to try or %NULL
- * @pparts: info about partitions found is returned here
* @data: MTD partition parser-specific data
*
- * This function tries to find partition on MTD device @master. It uses MTD
- * partition parsers, specified in @types. However, if @types is %NULL, then
- * the default list of parsers is used. The default list contains only the
+ * This function tries to find & register partitions on MTD device @master. It
+ * uses MTD partition parsers, specified in @types. However, if @types is %NULL,
+ * then the default list of parsers is used. The default list contains only the
* "cmdlinepart" and "ofpart" parsers ATM.
* Note: If there are more then one parser in @types, the kernel only takes the
* partitions parsed out by the first parser.
*
* This function may return:
* o a negative error code in case of failure
- * o zero otherwise, and @pparts will describe the partitions, number of
- * partitions, and the parser which parsed them. Caller must release
- * resources with mtd_part_parser_cleanup() when finished with the returned
- * data.
+ * o number of found partitions otherwise
*/
int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
- struct mtd_partitions *pparts,
struct mtd_part_parser_data *data)
{
+ struct mtd_partitions pparts = { };
struct mtd_part_parser *parser;
int ret, err = 0;
@@ -970,7 +954,7 @@ int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
* handled in a separated function.
*/
if (!strcmp(*types, "ofpart")) {
- ret = mtd_part_of_parse(master, pparts);
+ ret = mtd_part_of_parse(master, &pparts);
} else {
pr_debug("%s: parsing partitions %s\n", master->name,
*types);
@@ -981,13 +965,17 @@ int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
parser ? parser->name : NULL);
if (!parser)
continue;
- ret = mtd_part_do_parse(parser, master, pparts, data);
+ ret = mtd_part_do_parse(parser, master, &pparts, data);
if (ret <= 0)
mtd_part_parser_put(parser);
}
/* Found partitions! */
- if (ret > 0)
- return 0;
+ if (ret > 0) {
+ err = add_mtd_partitions(master, pparts.parts,
+ pparts.nr_parts);
+ mtd_part_parser_cleanup(&pparts);
+ return err ? err : pparts.nr_parts;
+ }
/*
* Stash the first error we see; only report it if no parser
* succeeds
diff --git a/drivers/mtd/nand/onenand/samsung.c b/drivers/mtd/nand/onenand/samsung.c
index 2e9d076e445a..4cce4c0311ca 100644
--- a/drivers/mtd/nand/onenand/samsung.c
+++ b/drivers/mtd/nand/onenand/samsung.c
@@ -958,8 +958,7 @@ static int s3c_onenand_remove(struct platform_device *pdev)
static int s3c_pm_ops_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = dev_get_drvdata(dev);
struct onenand_chip *this = mtd->priv;
this->wait(mtd, FL_PM_SUSPENDED);
@@ -968,8 +967,7 @@ static int s3c_pm_ops_suspend(struct device *dev)
static int s3c_pm_ops_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = dev_get_drvdata(dev);
struct onenand_chip *this = mtd->priv;
this->unlock_all(mtd);
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 19a2b283fbbe..6871ff0fd300 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -46,7 +46,7 @@ config MTD_NAND_DENALI
config MTD_NAND_DENALI_PCI
tristate "Support Denali NAND controller on Intel Moorestown"
select MTD_NAND_DENALI
- depends on HAS_DMA && PCI
+ depends on PCI
help
Enable the driver for NAND flash on Intel Moorestown, using the
Denali NAND controller core.
@@ -152,7 +152,6 @@ config MTD_NAND_S3C2410_CLKSTOP
config MTD_NAND_TANGO
tristate "NAND Flash support for Tango chips"
depends on ARCH_TANGO || COMPILE_TEST
- depends on HAS_DMA
help
Enables the NAND Flash controller on Tango chips.
@@ -285,7 +284,7 @@ config MTD_NAND_MARVELL
tristate "NAND controller support on Marvell boards"
depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
COMPILE_TEST
- depends on HAS_IOMEM && HAS_DMA
+ depends on HAS_IOMEM
help
This enables the NAND flash controller driver for Marvell boards,
including:
@@ -447,7 +446,6 @@ config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
depends on SUPERH || COMPILE_TEST
depends on HAS_IOMEM
- depends on HAS_DMA
help
Several Renesas SuperH CPU has FLCTL. This option enables support
for NAND Flash using FLCTL.
@@ -515,7 +513,6 @@ config MTD_NAND_SUNXI
config MTD_NAND_HISI504
tristate "Support for NAND controller on Hisilicon SoC Hip04"
depends on ARCH_HISI || COMPILE_TEST
- depends on HAS_DMA
help
Enables support for NAND controller on Hisilicon SoC Hip04.
@@ -529,7 +526,6 @@ config MTD_NAND_QCOM
config MTD_NAND_MTK
tristate "Support for NAND controller on MTK SoCs"
depends on ARCH_MEDIATEK || COMPILE_TEST
- depends on HAS_DMA
help
Enables support for NAND controller on MTK SoCs.
This controller is found on mt27xx, mt81xx, mt65xx SoCs.
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 0f09518d980f..7255a0d94374 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -27,7 +27,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/err.h>
-#include <linux/clk.h>
#include <linux/io.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
@@ -55,7 +54,6 @@ struct davinci_nand_info {
struct nand_chip chip;
struct device *dev;
- struct clk *clk;
bool is_readmode;
@@ -703,22 +701,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
/* Use board-specific ECC config */
info->chip.ecc.mode = pdata->ecc_mode;
- ret = -EINVAL;
-
- info->clk = devm_clk_get(&pdev->dev, "aemif");
- if (IS_ERR(info->clk)) {
- ret = PTR_ERR(info->clk);
- dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
- return ret;
- }
-
- ret = clk_prepare_enable(info->clk);
- if (ret < 0) {
- dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
- ret);
- goto err_clk_enable;
- }
-
spin_lock_irq(&davinci_nand_lock);
/* put CSxNAND into NAND mode */
@@ -732,7 +714,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL);
if (ret < 0) {
dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
- goto err;
+ return ret;
}
switch (info->chip.ecc.mode) {
@@ -838,9 +820,6 @@ err_cleanup_nand:
nand_cleanup(&info->chip);
err:
- clk_disable_unprepare(info->clk);
-
-err_clk_enable:
spin_lock_irq(&davinci_nand_lock);
if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
ecc4_busy = false;
@@ -859,8 +838,6 @@ static int nand_davinci_remove(struct platform_device *pdev)
nand_release(nand_to_mtd(&info->chip));
- clk_disable_unprepare(info->clk);
-
return 0;
}
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 2b7b2b982b77..8d10061abb4b 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1480,12 +1480,12 @@ static int __init doc_probe(unsigned long physadr)
WriteDOC(tmp, virtadr, Mplus_DOCControl);
WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
- mdelay(1);
+ usleep_range(1000, 2000);
/* Enable the Millennium Plus ASIC */
tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT;
WriteDOC(tmp, virtadr, Mplus_DOCControl);
WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
- mdelay(1);
+ usleep_range(1000, 2000);
ChipID = ReadDOC(virtadr, ChipID);
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index d28df991c73c..51f0b340bc0d 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -813,8 +813,6 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
struct mtd_info *mtd = nand_to_mtd(&priv->chip);
- nand_release(mtd);
-
kfree(mtd->name);
if (priv->vbase)
@@ -926,15 +924,20 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev)
/* First look for RedBoot table or partitions on the command
* line, these take precedence over device tree information */
- mtd_device_parse_register(mtd, part_probe_types, NULL,
- NULL, 0);
+ ret = mtd_device_parse_register(mtd, part_probe_types, NULL, NULL, 0);
+ if (ret)
+ goto cleanup_nand;
pr_info("eLBC NAND device at 0x%llx, bank %d\n",
(unsigned long long)res.start, priv->bank);
+
return 0;
+cleanup_nand:
+ nand_cleanup(&priv->chip);
err:
fsl_elbc_chip_remove(priv);
+
return ret;
}
@@ -942,7 +945,9 @@ static int fsl_elbc_nand_remove(struct platform_device *pdev)
{
struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
struct fsl_elbc_mtd *priv = dev_get_drvdata(&pdev->dev);
+ struct mtd_info *mtd = nand_to_mtd(&priv->chip);
+ nand_release(mtd);
fsl_elbc_chip_remove(priv);
mutex_lock(&fsl_elbc_nand_mutex);
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index 61aae0224078..382b67e97174 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -342,9 +342,16 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
case NAND_CMD_READID:
case NAND_CMD_PARAM: {
+ /*
+ * For READID, read 8 bytes that are currently used.
+ * For PARAM, read all 3 copies of 256-bytes pages.
+ */
+ int len = 8;
int timing = IFC_FIR_OP_RB;
- if (command == NAND_CMD_PARAM)
+ if (command == NAND_CMD_PARAM) {
timing = IFC_FIR_OP_RBCD;
+ len = 256 * 3;
+ }
ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
@@ -354,12 +361,8 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
&ifc->ifc_nand.nand_fcr0);
ifc_out32(column, &ifc->ifc_nand.row3);
- /*
- * although currently it's 8 bytes for READID, we always read
- * the maximum 256 bytes(for PARAM)
- */
- ifc_out32(256, &ifc->ifc_nand.nand_fbcr);
- ifc_nand_ctrl->read_bytes = 256;
+ ifc_out32(len, &ifc->ifc_nand.nand_fbcr);
+ ifc_nand_ctrl->read_bytes = len;
set_addr(mtd, 0, 0, 0);
fsl_ifc_run_command(mtd);
@@ -924,8 +927,6 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv)
{
struct mtd_info *mtd = nand_to_mtd(&priv->chip);
- nand_release(mtd);
-
kfree(mtd->name);
if (priv->vbase)
@@ -1059,21 +1060,29 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
/* First look for RedBoot table or partitions on the command
* line, these take precedence over device tree information */
- mtd_device_parse_register(mtd, part_probe_types, NULL, NULL, 0);
+ ret = mtd_device_parse_register(mtd, part_probe_types, NULL, NULL, 0);
+ if (ret)
+ goto cleanup_nand;
dev_info(priv->dev, "IFC NAND device at 0x%llx, bank %d\n",
(unsigned long long)res.start, priv->bank);
+
return 0;
+cleanup_nand:
+ nand_cleanup(&priv->chip);
err:
fsl_ifc_chip_remove(priv);
+
return ret;
}
static int fsl_ifc_nand_remove(struct platform_device *dev)
{
struct fsl_ifc_mtd *priv = dev_get_drvdata(&dev->dev);
+ struct mtd_info *mtd = nand_to_mtd(&priv->chip);
+ nand_release(mtd);
fsl_ifc_chip_remove(priv);
mutex_lock(&fsl_ifc_nand_mutex);
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 28c48dcc514e..f4a5a317d4ae 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -1022,12 +1022,12 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
host->read_dma_chan = dma_request_channel(mask, filter, NULL);
if (!host->read_dma_chan) {
dev_err(&pdev->dev, "Unable to get read dma channel\n");
- goto err_req_read_chnl;
+ goto disable_clk;
}
host->write_dma_chan = dma_request_channel(mask, filter, NULL);
if (!host->write_dma_chan) {
dev_err(&pdev->dev, "Unable to get write dma channel\n");
- goto err_req_write_chnl;
+ goto release_dma_read_chan;
}
}
@@ -1050,7 +1050,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
ret = nand_scan_ident(mtd, 1, NULL);
if (ret) {
dev_err(&pdev->dev, "No NAND Device found!\n");
- goto err_scan_ident;
+ goto release_dma_write_chan;
}
if (AMBA_REV_BITS(host->pid) >= 8) {
@@ -1065,7 +1065,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
mtd->oobsize);
ret = -EINVAL;
- goto err_probe;
+ goto release_dma_write_chan;
}
mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops);
@@ -1090,7 +1090,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev, "Unsupported ECC mode!\n");
- goto err_probe;
+ goto release_dma_write_chan;
}
/*
@@ -1110,7 +1110,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
"No oob scheme defined for oobsize %d\n",
mtd->oobsize);
ret = -EINVAL;
- goto err_probe;
+ goto release_dma_write_chan;
}
}
}
@@ -1118,26 +1118,29 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
/* Second stage of scan to fill MTD data-structures */
ret = nand_scan_tail(mtd);
if (ret)
- goto err_probe;
+ goto release_dma_write_chan;
mtd->name = "nand";
ret = mtd_device_register(mtd, NULL, 0);
if (ret)
- goto err_probe;
+ goto cleanup_nand;
platform_set_drvdata(pdev, host);
dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
+
return 0;
-err_probe:
-err_scan_ident:
+cleanup_nand:
+ nand_cleanup(nand);
+release_dma_write_chan:
if (host->mode == USE_DMA_ACCESS)
dma_release_channel(host->write_dma_chan);
-err_req_write_chnl:
+release_dma_read_chan:
if (host->mode == USE_DMA_ACCESS)
dma_release_channel(host->read_dma_chan);
-err_req_read_chnl:
+disable_clk:
clk_disable_unprepare(host->clk);
+
return ret;
}
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
index e94556705dc7..83697b8df871 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
@@ -258,8 +258,9 @@ int bch_set_geometry(struct gpmi_nand_data *this)
unsigned int gf_len;
int ret;
- if (common_nfc_set_geometry(this))
- return !0;
+ ret = common_nfc_set_geometry(this);
+ if (ret)
+ return ret;
block_count = bch_geo->ecc_chunk_count - 1;
block_size = bch_geo->ecc_chunk_size;
@@ -544,19 +545,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
return reg & mask;
}
-static inline void set_dma_type(struct gpmi_nand_data *this,
- enum dma_ops_type type)
-{
- this->last_dma_type = this->dma_type;
- this->dma_type = type;
-}
-
int gpmi_send_command(struct gpmi_nand_data *this)
{
struct dma_chan *channel = get_dma_chan(this);
struct dma_async_tx_descriptor *desc;
struct scatterlist *sgl;
int chip = this->current_chip;
+ int ret;
u32 pio[3];
/* [1] send out the PIO words */
@@ -586,15 +581,19 @@ int gpmi_send_command(struct gpmi_nand_data *this)
return -EINVAL;
/* [3] submit the DMA */
- set_dma_type(this, DMA_FOR_COMMAND);
- return start_dma_without_bch_irq(this, desc);
+ ret = start_dma_without_bch_irq(this, desc);
+
+ dma_unmap_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
+
+ return ret;
}
-int gpmi_send_data(struct gpmi_nand_data *this)
+int gpmi_send_data(struct gpmi_nand_data *this, const void *buf, int len)
{
struct dma_async_tx_descriptor *desc;
struct dma_chan *channel = get_dma_chan(this);
int chip = this->current_chip;
+ int ret;
uint32_t command_mode;
uint32_t address;
u32 pio[2];
@@ -608,7 +607,7 @@ int gpmi_send_data(struct gpmi_nand_data *this)
| BF_GPMI_CTRL0_CS(chip, this)
| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
| BF_GPMI_CTRL0_ADDRESS(address)
- | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ | BF_GPMI_CTRL0_XFER_COUNT(len);
pio[1] = 0;
desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
@@ -616,7 +615,7 @@ int gpmi_send_data(struct gpmi_nand_data *this)
return -EINVAL;
/* [2] send DMA request */
- prepare_data_dma(this, DMA_TO_DEVICE);
+ prepare_data_dma(this, buf, len, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
1, DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
@@ -624,16 +623,21 @@ int gpmi_send_data(struct gpmi_nand_data *this)
return -EINVAL;
/* [3] submit the DMA */
- set_dma_type(this, DMA_FOR_WRITE_DATA);
- return start_dma_without_bch_irq(this, desc);
+ ret = start_dma_without_bch_irq(this, desc);
+
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
+
+ return ret;
}
-int gpmi_read_data(struct gpmi_nand_data *this)
+int gpmi_read_data(struct gpmi_nand_data *this, void *buf, int len)
{
struct dma_async_tx_descriptor *desc;
struct dma_chan *channel = get_dma_chan(this);
int chip = this->current_chip;
+ int ret;
u32 pio[2];
+ bool direct;
/* [1] : send PIO */
pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
@@ -641,7 +645,7 @@ int gpmi_read_data(struct gpmi_nand_data *this)
| BF_GPMI_CTRL0_CS(chip, this)
| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
- | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ | BF_GPMI_CTRL0_XFER_COUNT(len);
pio[1] = 0;
desc = dmaengine_prep_slave_sg(channel,
(struct scatterlist *)pio,
@@ -650,7 +654,7 @@ int gpmi_read_data(struct gpmi_nand_data *this)
return -EINVAL;
/* [2] : send DMA request */
- prepare_data_dma(this, DMA_FROM_DEVICE);
+ direct = prepare_data_dma(this, buf, len, DMA_FROM_DEVICE);
desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
1, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
@@ -658,8 +662,14 @@ int gpmi_read_data(struct gpmi_nand_data *this)
return -EINVAL;
/* [3] : submit the DMA */
- set_dma_type(this, DMA_FOR_READ_DATA);
- return start_dma_without_bch_irq(this, desc);
+
+ ret = start_dma_without_bch_irq(this, desc);
+
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
+ if (!direct)
+ memcpy(buf, this->data_buffer_dma, len);
+
+ return ret;
}
int gpmi_send_page(struct gpmi_nand_data *this,
@@ -703,7 +713,6 @@ int gpmi_send_page(struct gpmi_nand_data *this,
if (!desc)
return -EINVAL;
- set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
return start_dma_with_bch_irq(this, desc);
}
@@ -785,7 +794,6 @@ int gpmi_read_page(struct gpmi_nand_data *this,
return -EINVAL;
/* [4] submit the DMA */
- set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
return start_dma_with_bch_irq(this, desc);
}
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index c2597c8107a0..f6aa358a3452 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -198,17 +198,16 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
*
* We may have available oob space in this case.
*/
-static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
+static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
+ unsigned int ecc_strength,
+ unsigned int ecc_step)
{
struct bch_geometry *geo = &this->bch_geometry;
struct nand_chip *chip = &this->nand;
struct mtd_info *mtd = nand_to_mtd(chip);
unsigned int block_mark_bit_offset;
- if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
- return -EINVAL;
-
- switch (chip->ecc_step_ds) {
+ switch (ecc_step) {
case SZ_512:
geo->gf_len = 13;
break;
@@ -221,8 +220,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
chip->ecc_strength_ds, chip->ecc_step_ds);
return -EINVAL;
}
- geo->ecc_chunk_size = chip->ecc_step_ds;
- geo->ecc_strength = round_up(chip->ecc_strength_ds, 2);
+ geo->ecc_chunk_size = ecc_step;
+ geo->ecc_strength = round_up(ecc_strength, 2);
if (!gpmi_check_ecc(this))
return -EINVAL;
@@ -230,7 +229,7 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
if (geo->ecc_chunk_size < mtd->oobsize) {
dev_err(this->dev,
"unsupported nand chip. ecc size: %d, oob size : %d\n",
- chip->ecc_step_ds, mtd->oobsize);
+ ecc_step, mtd->oobsize);
return -EINVAL;
}
@@ -423,9 +422,20 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
+ struct nand_chip *chip = &this->nand;
+
+ if (chip->ecc.strength > 0 && chip->ecc.size > 0)
+ return set_geometry_by_ecc_info(this, chip->ecc.strength,
+ chip->ecc.size);
+
if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
- || legacy_set_geometry(this))
- return set_geometry_by_ecc_info(this);
+ || legacy_set_geometry(this)) {
+ if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
+ return -EINVAL;
+
+ return set_geometry_by_ecc_info(this, chip->ecc_strength_ds,
+ chip->ecc_step_ds);
+ }
return 0;
}
@@ -437,33 +447,32 @@ struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
}
/* Can we use the upper's buffer directly for DMA? */
-void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
+bool prepare_data_dma(struct gpmi_nand_data *this, const void *buf, int len,
+ enum dma_data_direction dr)
{
struct scatterlist *sgl = &this->data_sgl;
int ret;
/* first try to map the upper buffer directly */
- if (virt_addr_valid(this->upper_buf) &&
- !object_is_on_stack(this->upper_buf)) {
- sg_init_one(sgl, this->upper_buf, this->upper_len);
+ if (virt_addr_valid(buf) && !object_is_on_stack(buf)) {
+ sg_init_one(sgl, buf, len);
ret = dma_map_sg(this->dev, sgl, 1, dr);
if (ret == 0)
goto map_fail;
- this->direct_dma_map_ok = true;
- return;
+ return true;
}
map_fail:
/* We have to use our own DMA buffer. */
- sg_init_one(sgl, this->data_buffer_dma, this->upper_len);
+ sg_init_one(sgl, this->data_buffer_dma, len);
if (dr == DMA_TO_DEVICE)
- memcpy(this->data_buffer_dma, this->upper_buf, this->upper_len);
+ memcpy(this->data_buffer_dma, buf, len);
dma_map_sg(this->dev, sgl, 1, dr);
- this->direct_dma_map_ok = false;
+ return false;
}
/* This will be called after the DMA operation is finished. */
@@ -472,31 +481,6 @@ static void dma_irq_callback(void *param)
struct gpmi_nand_data *this = param;
struct completion *dma_c = &this->dma_done;
- switch (this->dma_type) {
- case DMA_FOR_COMMAND:
- dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE);
- break;
-
- case DMA_FOR_READ_DATA:
- dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
- if (this->direct_dma_map_ok == false)
- memcpy(this->upper_buf, this->data_buffer_dma,
- this->upper_len);
- break;
-
- case DMA_FOR_WRITE_DATA:
- dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
- break;
-
- case DMA_FOR_READ_ECC_PAGE:
- case DMA_FOR_WRITE_ECC_PAGE:
- /* We have to wait the BCH interrupt to finish. */
- break;
-
- default:
- dev_err(this->dev, "in wrong DMA operation.\n");
- }
-
complete(dma_c);
}
@@ -516,8 +500,7 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this,
/* Wait for the interrupt from the DMA block. */
timeout = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
if (!timeout) {
- dev_err(this->dev, "DMA timeout, last DMA :%d\n",
- this->last_dma_type);
+ dev_err(this->dev, "DMA timeout, last DMA\n");
gpmi_dump_info(this);
return -ETIMEDOUT;
}
@@ -546,8 +529,7 @@ int start_dma_with_bch_irq(struct gpmi_nand_data *this,
/* Wait for the interrupt from the BCH block. */
timeout = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
if (!timeout) {
- dev_err(this->dev, "BCH timeout, last DMA :%d\n",
- this->last_dma_type);
+ dev_err(this->dev, "BCH timeout\n");
gpmi_dump_info(this);
return -ETIMEDOUT;
}
@@ -695,56 +677,6 @@ static void release_resources(struct gpmi_nand_data *this)
release_dma_channels(this);
}
-static int read_page_prepare(struct gpmi_nand_data *this,
- void *destination, unsigned length,
- void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
- void **use_virt, dma_addr_t *use_phys)
-{
- struct device *dev = this->dev;
-
- if (virt_addr_valid(destination)) {
- dma_addr_t dest_phys;
-
- dest_phys = dma_map_single(dev, destination,
- length, DMA_FROM_DEVICE);
- if (dma_mapping_error(dev, dest_phys)) {
- if (alt_size < length) {
- dev_err(dev, "Alternate buffer is too small\n");
- return -ENOMEM;
- }
- goto map_failed;
- }
- *use_virt = destination;
- *use_phys = dest_phys;
- this->direct_dma_map_ok = true;
- return 0;
- }
-
-map_failed:
- *use_virt = alt_virt;
- *use_phys = alt_phys;
- this->direct_dma_map_ok = false;
- return 0;
-}
-
-static inline void read_page_end(struct gpmi_nand_data *this,
- void *destination, unsigned length,
- void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
- void *used_virt, dma_addr_t used_phys)
-{
- if (this->direct_dma_map_ok)
- dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE);
-}
-
-static inline void read_page_swap_end(struct gpmi_nand_data *this,
- void *destination, unsigned length,
- void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
- void *used_virt, dma_addr_t used_phys)
-{
- if (!this->direct_dma_map_ok)
- memcpy(destination, alt_virt, length);
-}
-
static int send_page_prepare(struct gpmi_nand_data *this,
const void *source, unsigned length,
void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
@@ -946,10 +878,8 @@ static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
struct gpmi_nand_data *this = nand_get_controller_data(chip);
dev_dbg(this->dev, "len is %d\n", len);
- this->upper_buf = buf;
- this->upper_len = len;
- gpmi_read_data(this);
+ gpmi_read_data(this, buf, len);
}
static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
@@ -958,10 +888,8 @@ static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
struct gpmi_nand_data *this = nand_get_controller_data(chip);
dev_dbg(this->dev, "len is %d\n", len);
- this->upper_buf = (uint8_t *)buf;
- this->upper_len = len;
- gpmi_send_data(this);
+ gpmi_send_data(this, buf, len);
}
static uint8_t gpmi_read_byte(struct mtd_info *mtd)
@@ -1031,44 +959,46 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip,
struct mtd_info *mtd = nand_to_mtd(chip);
void *payload_virt;
dma_addr_t payload_phys;
- void *auxiliary_virt;
- dma_addr_t auxiliary_phys;
unsigned int i;
unsigned char *status;
unsigned int max_bitflips = 0;
int ret;
+ bool direct = false;
dev_dbg(this->dev, "page number is : %d\n", page);
- ret = read_page_prepare(this, buf, nfc_geo->payload_size,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- &payload_virt, &payload_phys);
- if (ret) {
- dev_err(this->dev, "Inadequate DMA buffer\n");
- ret = -ENOMEM;
- return ret;
+
+ payload_virt = this->payload_virt;
+ payload_phys = this->payload_phys;
+
+ if (virt_addr_valid(buf)) {
+ dma_addr_t dest_phys;
+
+ dest_phys = dma_map_single(this->dev, buf, nfc_geo->payload_size,
+ DMA_FROM_DEVICE);
+ if (!dma_mapping_error(this->dev, dest_phys)) {
+ payload_virt = buf;
+ payload_phys = dest_phys;
+ direct = true;
+ }
}
- auxiliary_virt = this->auxiliary_virt;
- auxiliary_phys = this->auxiliary_phys;
/* go! */
- ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
- read_page_end(this, buf, nfc_geo->payload_size,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
+ ret = gpmi_read_page(this, payload_phys, this->auxiliary_phys);
+
+ if (direct)
+ dma_unmap_single(this->dev, payload_phys, nfc_geo->payload_size,
+ DMA_FROM_DEVICE);
+
if (ret) {
dev_err(this->dev, "Error in ECC-based read: %d\n", ret);
return ret;
}
/* Loop over status bytes, accumulating ECC status. */
- status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
+ status = this->auxiliary_virt + nfc_geo->auxiliary_status_offset;
- read_page_swap_end(this, buf, nfc_geo->payload_size,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
+ if (!direct)
+ memcpy(buf, this->payload_virt, nfc_geo->payload_size);
for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
@@ -1123,7 +1053,7 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip,
buf + i * nfc_geo->ecc_chunk_size,
nfc_geo->ecc_chunk_size,
eccbuf, eccbytes,
- auxiliary_virt,
+ this->auxiliary_virt,
nfc_geo->metadata_size,
nfc_geo->ecc_strength);
} else {
@@ -1151,7 +1081,7 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip,
}
/* handle the block mark swapping */
- block_mark_swapping(this, buf, auxiliary_virt);
+ block_mark_swapping(this, buf, this->auxiliary_virt);
if (oob_required) {
/*
@@ -1165,7 +1095,7 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip,
* the block mark.
*/
memset(chip->oob_poi, ~0, mtd->oobsize);
- chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+ chip->oob_poi[0] = ((uint8_t *)this->auxiliary_virt)[0];
}
return max_bitflips;
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
index 62fde59b995f..6aa10d6962d6 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
@@ -77,15 +77,6 @@ struct boot_rom_geometry {
unsigned int search_area_stride_exponent;
};
-/* DMA operations types */
-enum dma_ops_type {
- DMA_FOR_COMMAND = 1,
- DMA_FOR_READ_DATA,
- DMA_FOR_WRITE_DATA,
- DMA_FOR_READ_ECC_PAGE,
- DMA_FOR_WRITE_ECC_PAGE
-};
-
enum gpmi_type {
IS_MX23,
IS_MX28,
@@ -150,13 +141,6 @@ struct gpmi_nand_data {
int current_chip;
unsigned int command_length;
- /* passed from upper layer */
- uint8_t *upper_buf;
- int upper_len;
-
- /* for DMA operations */
- bool direct_dma_map_ok;
-
struct scatterlist cmd_sgl;
char *cmd_buffer;
@@ -178,8 +162,6 @@ struct gpmi_nand_data {
/* DMA channels */
#define DMA_CHANS 8
struct dma_chan *dma_chans[DMA_CHANS];
- enum dma_ops_type last_dma_type;
- enum dma_ops_type dma_type;
struct completion dma_done;
/* private */
@@ -189,7 +171,7 @@ struct gpmi_nand_data {
/* Common Services */
int common_nfc_set_geometry(struct gpmi_nand_data *);
struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
-void prepare_data_dma(struct gpmi_nand_data *,
+bool prepare_data_dma(struct gpmi_nand_data *, const void *buf, int len,
enum dma_data_direction dr);
int start_dma_without_bch_irq(struct gpmi_nand_data *,
struct dma_async_tx_descriptor *);
@@ -208,8 +190,9 @@ int gpmi_disable_clk(struct gpmi_nand_data *this);
int gpmi_setup_data_interface(struct mtd_info *mtd, int chipnr,
const struct nand_data_interface *conf);
void gpmi_nfc_apply_timings(struct gpmi_nand_data *this);
-int gpmi_read_data(struct gpmi_nand_data *);
-int gpmi_send_data(struct gpmi_nand_data *);
+int gpmi_read_data(struct gpmi_nand_data *, void *buf, int len);
+int gpmi_send_data(struct gpmi_nand_data *, const void *buf, int len);
+
int gpmi_send_page(struct gpmi_nand_data *,
dma_addr_t payload, dma_addr_t auxiliary);
int gpmi_read_page(struct gpmi_nand_data *,
diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c
index 27558a67fa41..a1e009c8e556 100644
--- a/drivers/mtd/nand/raw/hisi504_nand.c
+++ b/drivers/mtd/nand/raw/hisi504_nand.c
@@ -731,23 +731,19 @@ static int hisi_nfc_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "no IRQ resource defined\n");
- ret = -ENXIO;
- goto err_res;
+ return -ENXIO;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->iobase = devm_ioremap_resource(dev, res);
- if (IS_ERR(host->iobase)) {
- ret = PTR_ERR(host->iobase);
- goto err_res;
- }
+ if (IS_ERR(host->iobase))
+ return PTR_ERR(host->iobase);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
host->mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(host->mmio)) {
- ret = PTR_ERR(host->mmio);
dev_err(dev, "devm_ioremap_resource[1] fail\n");
- goto err_res;
+ return PTR_ERR(host->mmio);
}
mtd->name = "hisi_nand";
@@ -770,19 +766,17 @@ static int hisi_nfc_probe(struct platform_device *pdev)
ret = devm_request_irq(dev, irq, hinfc_irq_handle, 0x0, "nandc", host);
if (ret) {
dev_err(dev, "failed to request IRQ\n");
- goto err_res;
+ return ret;
}
ret = nand_scan_ident(mtd, max_chips, NULL);
if (ret)
- goto err_res;
+ return ret;
host->buffer = dmam_alloc_coherent(dev, mtd->writesize + mtd->oobsize,
&host->dma_buffer, GFP_KERNEL);
- if (!host->buffer) {
- ret = -ENOMEM;
- goto err_res;
- }
+ if (!host->buffer)
+ return -ENOMEM;
host->dma_oob = host->dma_buffer + mtd->writesize;
memset(host->buffer, 0xff, mtd->writesize + mtd->oobsize);
@@ -798,8 +792,7 @@ static int hisi_nfc_probe(struct platform_device *pdev)
*/
default:
dev_err(dev, "NON-2KB page size nand flash\n");
- ret = -EINVAL;
- goto err_res;
+ return -EINVAL;
}
hinfc_write(host, flag, HINFC504_CON);
@@ -809,21 +802,17 @@ static int hisi_nfc_probe(struct platform_device *pdev)
ret = nand_scan_tail(mtd);
if (ret) {
dev_err(dev, "nand_scan_tail failed: %d\n", ret);
- goto err_res;
+ return ret;
}
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
dev_err(dev, "Err MTD partition=%d\n", ret);
- goto err_mtd;
+ nand_cleanup(chip);
+ return ret;
}
return 0;
-
-err_mtd:
- nand_release(mtd);
-err_res:
- return ret;
}
static int hisi_nfc_remove(struct platform_device *pdev)
diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index e357948a7505..052d123a8304 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -673,7 +673,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
host->io_base = devm_ioremap_resource(&pdev->dev, rc);
if (IS_ERR(host->io_base))
return PTR_ERR(host->io_base);
-
+
host->io_base_phy = rc->start;
nand_chip = &host->nand_chip;
@@ -706,11 +706,11 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
if (IS_ERR(host->clk)) {
dev_err(&pdev->dev, "Clock initialization failure\n");
res = -ENOENT;
- goto err_exit1;
+ goto free_gpio;
}
res = clk_prepare_enable(host->clk);
if (res)
- goto err_put_clk;
+ goto put_clk;
nand_chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl;
nand_chip->dev_ready = lpc32xx_nand_device_ready;
@@ -744,7 +744,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
res = lpc32xx_dma_setup(host);
if (res) {
res = -EIO;
- goto err_exit2;
+ goto unprepare_clk;
}
}
@@ -754,18 +754,18 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
*/
res = nand_scan_ident(mtd, 1, NULL);
if (res)
- goto err_exit3;
+ goto release_dma_chan;
host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
if (!host->dma_buf) {
res = -ENOMEM;
- goto err_exit3;
+ goto release_dma_chan;
}
host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
if (!host->dummy_buf) {
res = -ENOMEM;
- goto err_exit3;
+ goto release_dma_chan;
}
nand_chip->ecc.mode = NAND_ECC_HW;
@@ -783,14 +783,14 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
if (host->irq < 0) {
dev_err(&pdev->dev, "failed to get platform irq\n");
res = -EINVAL;
- goto err_exit3;
+ goto release_dma_chan;
}
if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq,
IRQF_TRIGGER_HIGH, DRV_NAME, host)) {
dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
res = -ENXIO;
- goto err_exit3;
+ goto release_dma_chan;
}
/*
@@ -799,27 +799,29 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
*/
res = nand_scan_tail(mtd);
if (res)
- goto err_exit4;
+ goto free_irq;
mtd->name = DRV_NAME;
res = mtd_device_register(mtd, host->ncfg->parts,
host->ncfg->num_parts);
- if (!res)
- return res;
+ if (res)
+ goto cleanup_nand;
- nand_release(mtd);
+ return 0;
-err_exit4:
+cleanup_nand:
+ nand_cleanup(nand_chip);
+free_irq:
free_irq(host->irq, host);
-err_exit3:
+release_dma_chan:
if (use_dma)
dma_release_channel(host->dma_chan);
-err_exit2:
+unprepare_clk:
clk_disable_unprepare(host->clk);
-err_put_clk:
+put_clk:
clk_put(host->clk);
-err_exit1:
+free_gpio:
lpc32xx_wp_enable(host);
gpio_free(host->ncfg->wp_gpio);
diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index 5f7cc6da0a7f..42820aa1abab 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -831,11 +831,11 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
if (IS_ERR(host->clk)) {
dev_err(&pdev->dev, "Clock failure\n");
res = -ENOENT;
- goto err_exit1;
+ goto enable_wp;
}
res = clk_prepare_enable(host->clk);
if (res)
- goto err_exit1;
+ goto enable_wp;
/* Set NAND IO addresses and command/ready functions */
chip->IO_ADDR_R = SLC_DATA(host->io_base);
@@ -874,19 +874,19 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
GFP_KERNEL);
if (host->data_buf == NULL) {
res = -ENOMEM;
- goto err_exit2;
+ goto unprepare_clk;
}
res = lpc32xx_nand_dma_setup(host);
if (res) {
res = -EIO;
- goto err_exit2;
+ goto unprepare_clk;
}
/* Find NAND device */
res = nand_scan_ident(mtd, 1, NULL);
if (res)
- goto err_exit3;
+ goto release_dma;
/* OOB and ECC CPU and DMA work areas */
host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
@@ -920,21 +920,23 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
*/
res = nand_scan_tail(mtd);
if (res)
- goto err_exit3;
+ goto release_dma;
mtd->name = "nxp_lpc3220_slc";
res = mtd_device_register(mtd, host->ncfg->parts,
host->ncfg->num_parts);
- if (!res)
- return res;
+ if (res)
+ goto cleanup_nand;
- nand_release(mtd);
+ return 0;
-err_exit3:
+cleanup_nand:
+ nand_cleanup(chip);
+release_dma:
dma_release_channel(host->dma_chan);
-err_exit2:
+unprepare_clk:
clk_disable_unprepare(host->clk);
-err_exit1:
+enable_wp:
lpc32xx_wp_enable(host);
return res;
diff --git a/drivers/mtd/nand/raw/mtk_ecc.c b/drivers/mtd/nand/raw/mtk_ecc.c
index 40d86a861a70..6432bd70c3b3 100644
--- a/drivers/mtd/nand/raw/mtk_ecc.c
+++ b/drivers/mtd/nand/raw/mtk_ecc.c
@@ -500,7 +500,6 @@ static int mtk_ecc_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct mtk_ecc *ecc;
struct resource *res;
- const struct of_device_id *of_ecc_id = NULL;
u32 max_eccdata_size;
int irq, ret;
@@ -508,11 +507,7 @@ static int mtk_ecc_probe(struct platform_device *pdev)
if (!ecc)
return -ENOMEM;
- of_ecc_id = of_match_device(mtk_ecc_dt_match, &pdev->dev);
- if (!of_ecc_id)
- return -ENODEV;
-
- ecc->caps = of_ecc_id->data;
+ ecc->caps = of_device_get_match_data(dev);
max_eccdata_size = ecc->caps->num_ecc_strength - 1;
max_eccdata_size = ecc->caps->ecc_strength[max_eccdata_size];
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index 6977da3a26aa..75c845adb050 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1434,7 +1434,6 @@ static int mtk_nfc_probe(struct platform_device *pdev)
struct device_node *np = dev->of_node;
struct mtk_nfc *nfc;
struct resource *res;
- const struct of_device_id *of_nfc_id = NULL;
int ret, irq;
nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
@@ -1452,6 +1451,7 @@ static int mtk_nfc_probe(struct platform_device *pdev)
else if (!nfc->ecc)
return -ENODEV;
+ nfc->caps = of_device_get_match_data(dev);
nfc->dev = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1498,14 +1498,6 @@ static int mtk_nfc_probe(struct platform_device *pdev)
goto clk_disable;
}
- of_nfc_id = of_match_device(mtk_nfc_id_table, &pdev->dev);
- if (!of_nfc_id) {
- ret = -ENODEV;
- goto clk_disable;
- }
-
- nfc->caps = of_nfc_id->data;
-
platform_set_drvdata(pdev, nfc);
ret = mtk_nfc_nand_chips_init(dev, nfc);
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index f28c3a555861..10c4f9919850 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -2174,7 +2174,6 @@ static int nand_set_features_op(struct nand_chip *chip, u8 feature,
struct mtd_info *mtd = nand_to_mtd(chip);
const u8 *params = data;
int i, ret;
- u8 status;
if (chip->exec_op) {
const struct nand_sdr_timings *sdr =
@@ -2188,26 +2187,18 @@ static int nand_set_features_op(struct nand_chip *chip, u8 feature,
};
struct nand_operation op = NAND_OPERATION(instrs);
- ret = nand_exec_op(chip, &op);
- if (ret)
- return ret;
-
- ret = nand_status_op(chip, &status);
- if (ret)
- return ret;
- } else {
- chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, feature, -1);
- for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
- chip->write_byte(mtd, params[i]);
+ return nand_exec_op(chip, &op);
+ }
- ret = chip->waitfunc(mtd, chip);
- if (ret < 0)
- return ret;
+ chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, feature, -1);
+ for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+ chip->write_byte(mtd, params[i]);
- status = ret;
- }
+ ret = chip->waitfunc(mtd, chip);
+ if (ret < 0)
+ return ret;
- if (status & NAND_STATUS_FAIL)
+ if (ret & NAND_STATUS_FAIL)
return -EIO;
return 0;
@@ -5092,6 +5083,37 @@ ext_out:
}
/*
+ * Recover data with bit-wise majority
+ */
+static void nand_bit_wise_majority(const void **srcbufs,
+ unsigned int nsrcbufs,
+ void *dstbuf,
+ unsigned int bufsize)
+{
+ int i, j, k;
+
+ for (i = 0; i < bufsize; i++) {
+ u8 val = 0;
+
+ for (j = 0; j < 8; j++) {
+ unsigned int cnt = 0;
+
+ for (k = 0; k < nsrcbufs; k++) {
+ const u8 *srcbuf = srcbufs[k];
+
+ if (srcbuf[i] & BIT(j))
+ cnt++;
+ }
+
+ if (cnt > nsrcbufs / 2)
+ val |= BIT(j);
+ }
+
+ ((u8 *)dstbuf)[i] = val;
+ }
+}
+
+/*
* Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
static int nand_flash_detect_onfi(struct nand_chip *chip)
@@ -5107,7 +5129,7 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
return 0;
/* ONFI chip: allocate a buffer to hold its parameter page */
- p = kzalloc(sizeof(*p), GFP_KERNEL);
+ p = kzalloc((sizeof(*p) * 3), GFP_KERNEL);
if (!p)
return -ENOMEM;
@@ -5118,21 +5140,32 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
}
for (i = 0; i < 3; i++) {
- ret = nand_read_data_op(chip, p, sizeof(*p), true);
+ ret = nand_read_data_op(chip, &p[i], sizeof(*p), true);
if (ret) {
ret = 0;
goto free_onfi_param_page;
}
- if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
+ if (onfi_crc16(ONFI_CRC_BASE, (u8 *)&p[i], 254) ==
le16_to_cpu(p->crc)) {
+ if (i)
+ memcpy(p, &p[i], sizeof(*p));
break;
}
}
if (i == 3) {
- pr_err("Could not find valid ONFI parameter page; aborting\n");
- goto free_onfi_param_page;
+ const void *srcbufs[3] = {p, p + 1, p + 2};
+
+ pr_warn("Could not find a valid ONFI parameter page, trying bit-wise majority to recover it\n");
+ nand_bit_wise_majority(srcbufs, ARRAY_SIZE(srcbufs), p,
+ sizeof(*p));
+
+ if (onfi_crc16(ONFI_CRC_BASE, (u8 *)p, 254) !=
+ le16_to_cpu(p->crc)) {
+ pr_err("ONFI parameter recovery failed, aborting\n");
+ goto free_onfi_param_page;
+ }
}
/* Check version */
@@ -6635,24 +6668,26 @@ EXPORT_SYMBOL(nand_scan_tail);
#endif
/**
- * nand_scan - [NAND Interface] Scan for the NAND device
+ * nand_scan_with_ids - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
* @maxchips: number of chips to scan for
+ * @ids: optional flash IDs table
*
* This fills out all the uninitialized function pointers with the defaults.
* The flash ID is read and the mtd/chip structures are filled with the
* appropriate values.
*/
-int nand_scan(struct mtd_info *mtd, int maxchips)
+int nand_scan_with_ids(struct mtd_info *mtd, int maxchips,
+ struct nand_flash_dev *ids)
{
int ret;
- ret = nand_scan_ident(mtd, maxchips, NULL);
+ ret = nand_scan_ident(mtd, maxchips, ids);
if (!ret)
ret = nand_scan_tail(mtd);
return ret;
}
-EXPORT_SYMBOL(nand_scan);
+EXPORT_SYMBOL(nand_scan_with_ids);
/**
* nand_cleanup - [NAND Interface] Free resources held by the NAND device
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index aad42812a353..d831a141a196 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -166,48 +166,15 @@
#define NFC_MAX_CS 7
/*
- * Ready/Busy detection type: describes the Ready/Busy detection modes
- *
- * @RB_NONE: no external detection available, rely on STATUS command
- * and software timeouts
- * @RB_NATIVE: use sunxi NAND controller Ready/Busy support. The Ready/Busy
- * pin of the NAND flash chip must be connected to one of the
- * native NAND R/B pins (those which can be muxed to the NAND
- * Controller)
- * @RB_GPIO: use a simple GPIO to handle Ready/Busy status. The Ready/Busy
- * pin of the NAND flash chip must be connected to a GPIO capable
- * pin.
- */
-enum sunxi_nand_rb_type {
- RB_NONE,
- RB_NATIVE,
- RB_GPIO,
-};
-
-/*
- * Ready/Busy structure: stores information related to Ready/Busy detection
- *
- * @type: the Ready/Busy detection mode
- * @info: information related to the R/B detection mode. Either a gpio
- * id or a native R/B id (those supported by the NAND controller).
- */
-struct sunxi_nand_rb {
- enum sunxi_nand_rb_type type;
- union {
- int gpio;
- int nativeid;
- } info;
-};
-
-/*
* Chip Select structure: stores information related to NAND Chip Select
*
* @cs: the NAND CS id used to communicate with a NAND Chip
- * @rb: the Ready/Busy description
+ * @rb: the Ready/Busy pin ID. -1 means no R/B pin connected to the
+ * NFC
*/
struct sunxi_nand_chip_sel {
u8 cs;
- struct sunxi_nand_rb rb;
+ s8 rb;
};
/*
@@ -440,30 +407,19 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
struct nand_chip *nand = mtd_to_nand(mtd);
struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
- struct sunxi_nand_rb *rb;
- int ret;
+ u32 mask;
if (sunxi_nand->selected < 0)
return 0;
- rb = &sunxi_nand->sels[sunxi_nand->selected].rb;
-
- switch (rb->type) {
- case RB_NATIVE:
- ret = !!(readl(nfc->regs + NFC_REG_ST) &
- NFC_RB_STATE(rb->info.nativeid));
- break;
- case RB_GPIO:
- ret = gpio_get_value(rb->info.gpio);
- break;
- case RB_NONE:
- default:
- ret = 0;
+ if (sunxi_nand->sels[sunxi_nand->selected].rb < 0) {
dev_err(nfc->dev, "cannot check R/B NAND status!\n");
- break;
+ return 0;
}
- return ret;
+ mask = NFC_RB_STATE(sunxi_nand->sels[sunxi_nand->selected].rb);
+
+ return !!(readl(nfc->regs + NFC_REG_ST) & mask);
}
static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip)
@@ -488,12 +444,11 @@ static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip)
ctl |= NFC_CE_SEL(sel->cs) | NFC_EN |
NFC_PAGE_SHIFT(nand->page_shift);
- if (sel->rb.type == RB_NONE) {
+ if (sel->rb < 0) {
nand->dev_ready = NULL;
} else {
nand->dev_ready = sunxi_nfc_dev_ready;
- if (sel->rb.type == RB_NATIVE)
- ctl |= NFC_RB_SEL(sel->rb.info.nativeid);
+ ctl |= NFC_RB_SEL(sel->rb);
}
writel(mtd->writesize, nfc->regs + NFC_REG_SPARE_AREA);
@@ -1946,26 +1901,10 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
chip->sels[i].cs = tmp;
if (!of_property_read_u32_index(np, "allwinner,rb", i, &tmp) &&
- tmp < 2) {
- chip->sels[i].rb.type = RB_NATIVE;
- chip->sels[i].rb.info.nativeid = tmp;
- } else {
- ret = of_get_named_gpio(np, "rb-gpios", i);
- if (ret >= 0) {
- tmp = ret;
- chip->sels[i].rb.type = RB_GPIO;
- chip->sels[i].rb.info.gpio = tmp;
- ret = devm_gpio_request(dev, tmp, "nand-rb");
- if (ret)
- return ret;
-
- ret = gpio_direction_input(tmp);
- if (ret)
- return ret;
- } else {
- chip->sels[i].rb.type = RB_NONE;
- }
- }
+ tmp < 2)
+ chip->sels[i].rb = tmp;
+ else
+ chip->sels[i].rb = -1;
}
nand = &chip->nand;
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index a6fbfa4e5799..6281da3dadac 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -272,28 +272,37 @@ static int memcmpb(void *a, int c, int n)
static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int len,
int check_oob)
{
- u8 buf[SECTORSIZE + nftl->mbd.mtd->oobsize];
struct mtd_info *mtd = nftl->mbd.mtd;
size_t retlen;
- int i;
+ int i, ret;
+ u8 *buf;
+
+ buf = kmalloc(SECTORSIZE + mtd->oobsize, GFP_KERNEL);
+ if (!buf)
+ return -1;
+ ret = -1;
for (i = 0; i < len; i += SECTORSIZE) {
if (mtd_read(mtd, address, SECTORSIZE, &retlen, buf))
- return -1;
+ goto out;
if (memcmpb(buf, 0xff, SECTORSIZE) != 0)
- return -1;
+ goto out;
if (check_oob) {
if(nftl_read_oob(mtd, address, mtd->oobsize,
&retlen, &buf[SECTORSIZE]) < 0)
- return -1;
+ goto out;
if (memcmpb(buf + SECTORSIZE, 0xff, mtd->oobsize) != 0)
- return -1;
+ goto out;
}
address += SECTORSIZE;
}
- return 0;
+ ret = 0;
+
+out:
+ kfree(buf);
+ return ret;
}
/* NFTL_format: format a Erase Unit by erasing ALL Erase Zones in the Erase Unit and
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 89da88e59121..6cc9c929ff57 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -71,7 +71,7 @@ config SPI_FSL_QUADSPI
config SPI_HISI_SFC
tristate "Hisilicon SPI-NOR Flash Controller(SFC)"
depends on ARCH_HISI || COMPILE_TEST
- depends on HAS_IOMEM && HAS_DMA
+ depends on HAS_IOMEM
help
This enables support for hisilicon SPI-NOR flash controller.
@@ -90,7 +90,7 @@ config SPI_INTEL_SPI
tristate
config SPI_INTEL_SPI_PCI
- tristate "Intel PCH/PCU SPI flash PCI driver"
+ tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
depends on X86 && PCI
select SPI_INTEL_SPI
help
@@ -106,7 +106,7 @@ config SPI_INTEL_SPI_PCI
will be called intel-spi-pci.
config SPI_INTEL_SPI_PLATFORM
- tristate "Intel PCH/PCU SPI flash platform driver"
+ tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)"
depends on X86
select SPI_INTEL_SPI
help
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index 5872f31eaa60..c3f7aaa5d18f 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -18,6 +18,8 @@
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
@@ -73,6 +75,10 @@ struct cqspi_st {
struct completion transfer_complete;
struct mutex bus_mutex;
+ struct dma_chan *rx_chan;
+ struct completion rx_dma_complete;
+ dma_addr_t mmap_phys_base;
+
int current_cs;
int current_page_size;
int current_erase_size;
@@ -930,11 +936,75 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to,
return len;
}
+static void cqspi_rx_dma_callback(void *param)
+{
+ struct cqspi_st *cqspi = param;
+
+ complete(&cqspi->rx_dma_complete);
+}
+
+static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf,
+ loff_t from, size_t len)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from;
+ int ret = 0;
+ struct dma_async_tx_descriptor *tx;
+ dma_cookie_t cookie;
+ dma_addr_t dma_dst;
+
+ if (!cqspi->rx_chan || !virt_addr_valid(buf)) {
+ memcpy_fromio(buf, cqspi->ahb_base + from, len);
+ return 0;
+ }
+
+ dma_dst = dma_map_single(nor->dev, buf, len, DMA_DEV_TO_MEM);
+ if (dma_mapping_error(nor->dev, dma_dst)) {
+ dev_err(nor->dev, "dma mapping failed\n");
+ return -ENOMEM;
+ }
+ tx = dmaengine_prep_dma_memcpy(cqspi->rx_chan, dma_dst, dma_src,
+ len, flags);
+ if (!tx) {
+ dev_err(nor->dev, "device_prep_dma_memcpy error\n");
+ ret = -EIO;
+ goto err_unmap;
+ }
+
+ tx->callback = cqspi_rx_dma_callback;
+ tx->callback_param = cqspi;
+ cookie = tx->tx_submit(tx);
+ reinit_completion(&cqspi->rx_dma_complete);
+
+ ret = dma_submit_error(cookie);
+ if (ret) {
+ dev_err(nor->dev, "dma_submit_error %d\n", cookie);
+ ret = -EIO;
+ goto err_unmap;
+ }
+
+ dma_async_issue_pending(cqspi->rx_chan);
+ ret = wait_for_completion_timeout(&cqspi->rx_dma_complete,
+ msecs_to_jiffies(len));
+ if (ret <= 0) {
+ dmaengine_terminate_sync(cqspi->rx_chan);
+ dev_err(nor->dev, "DMA wait_for_completion_timeout\n");
+ ret = -ETIMEDOUT;
+ goto err_unmap;
+ }
+
+err_unmap:
+ dma_unmap_single(nor->dev, dma_dst, len, DMA_DEV_TO_MEM);
+
+ return 0;
+}
+
static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
size_t len, u_char *buf)
{
struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
int ret;
ret = cqspi_set_protocol(nor, 1);
@@ -946,7 +1016,7 @@ static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
return ret;
if (f_pdata->use_direct_mode)
- memcpy_fromio(buf, cqspi->ahb_base + from, len);
+ ret = cqspi_direct_read_execute(nor, buf, from, len);
else
ret = cqspi_indirect_read_execute(nor, buf, from, len);
if (ret)
@@ -1115,6 +1185,21 @@ static void cqspi_controller_init(struct cqspi_st *cqspi)
cqspi_controller_enable(cqspi, 1);
}
+static void cqspi_request_mmap_dma(struct cqspi_st *cqspi)
+{
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+
+ cqspi->rx_chan = dma_request_chan_by_mask(&mask);
+ if (IS_ERR(cqspi->rx_chan)) {
+ dev_err(&cqspi->pdev->dev, "No Rx DMA available\n");
+ cqspi->rx_chan = NULL;
+ }
+ init_completion(&cqspi->rx_dma_complete);
+}
+
static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
{
const struct spi_nor_hwcaps hwcaps = {
@@ -1192,6 +1277,9 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
f_pdata->use_direct_mode = true;
dev_dbg(nor->dev, "using direct mode for %s\n",
mtd->name);
+
+ if (!cqspi->rx_chan)
+ cqspi_request_mmap_dma(cqspi);
}
}
@@ -1252,6 +1340,7 @@ static int cqspi_probe(struct platform_device *pdev)
dev_err(dev, "Cannot remap AHB address.\n");
return PTR_ERR(cqspi->ahb_base);
}
+ cqspi->mmap_phys_base = (dma_addr_t)res_ahb->start;
cqspi->ahb_size = resource_size(res_ahb);
init_completion(&cqspi->transfer_complete);
@@ -1322,6 +1411,9 @@ static int cqspi_remove(struct platform_device *pdev)
cqspi_controller_enable(cqspi, 0);
+ if (cqspi->rx_chan)
+ dma_release_channel(cqspi->rx_chan);
+
clk_disable_unprepare(cqspi->clk);
pm_runtime_put_sync(&pdev->dev);
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 3e3c0bbc45c0..7d9620c7ff6c 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -214,6 +214,7 @@ enum fsl_qspi_devtype {
FSL_QUADSPI_IMX7D,
FSL_QUADSPI_IMX6UL,
FSL_QUADSPI_LS1021A,
+ FSL_QUADSPI_LS2080A,
};
struct fsl_qspi_devtype_data {
@@ -267,6 +268,15 @@ static struct fsl_qspi_devtype_data ls1021a_data = {
.driver_data = 0,
};
+static const struct fsl_qspi_devtype_data ls2080a_data = {
+ .devtype = FSL_QUADSPI_LS2080A,
+ .rxfifo = 128,
+ .txfifo = 64,
+ .ahb_buf_size = 1024,
+ .driver_data = QUADSPI_QUIRK_TKT253890,
+};
+
+
#define FSL_QSPI_MAX_CHIP 4
struct fsl_qspi {
struct spi_nor nor[FSL_QSPI_MAX_CHIP];
@@ -661,7 +671,7 @@ static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
* causes the controller to clear the buffer, and use the sequence pointed
* by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
*/
-static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
+static void fsl_qspi_init_ahb_read(struct fsl_qspi *q)
{
void __iomem *base = q->iobase;
int seqid;
@@ -795,7 +805,7 @@ static int fsl_qspi_nor_setup_last(struct fsl_qspi *q)
fsl_qspi_init_lut(q);
/* Init for AHB read */
- fsl_qspi_init_abh_read(q);
+ fsl_qspi_init_ahb_read(q);
return 0;
}
@@ -806,6 +816,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
{ .compatible = "fsl,imx7d-qspi", .data = &imx7d_data, },
{ .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, },
{ .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, },
+ { .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c
index 04f9fb5cd9b6..dea7b0c4b339 100644
--- a/drivers/mtd/spi-nor/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/hisi-sfc.c
@@ -112,7 +112,7 @@ struct hifmc_host {
u32 num_chip;
};
-static inline int wait_op_finish(struct hifmc_host *host)
+static inline int hisi_spi_nor_wait_op_finish(struct hifmc_host *host)
{
u32 reg;
@@ -120,7 +120,7 @@ static inline int wait_op_finish(struct hifmc_host *host)
(reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT);
}
-static int get_if_type(enum spi_nor_protocol proto)
+static int hisi_spi_nor_get_if_type(enum spi_nor_protocol proto)
{
enum hifmc_iftype if_type;
@@ -208,7 +208,7 @@ static int hisi_spi_nor_op_reg(struct spi_nor *nor,
reg = FMC_OP_CMD1_EN | FMC_OP_REG_OP_START | optype;
writel(reg, host->regbase + FMC_OP);
- return wait_op_finish(host);
+ return hisi_spi_nor_wait_op_finish(host);
}
static int hisi_spi_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
@@ -259,9 +259,9 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
reg = OP_CFG_FM_CS(priv->chipselect);
if (op_type == FMC_OP_READ)
- if_type = get_if_type(nor->read_proto);
+ if_type = hisi_spi_nor_get_if_type(nor->read_proto);
else
- if_type = get_if_type(nor->write_proto);
+ if_type = hisi_spi_nor_get_if_type(nor->write_proto);
reg |= OP_CFG_MEM_IF_TYPE(if_type);
if (op_type == FMC_OP_READ)
reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3);
@@ -274,7 +274,7 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
: OP_CTRL_WR_OPCODE(nor->program_opcode);
writel(reg, host->regbase + FMC_OP_DMA);
- return wait_op_finish(host);
+ return hisi_spi_nor_wait_op_finish(host);
}
static ssize_t hisi_spi_nor_read(struct spi_nor *nor, loff_t from, size_t len,
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
index 699951523179..d2cbfc27826e 100644
--- a/drivers/mtd/spi-nor/intel-spi.c
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -136,6 +136,7 @@
* @swseq_reg: Use SW sequencer in register reads/writes
* @swseq_erase: Use SW sequencer in erase operation
* @erase_64k: 64k erase supported
+ * @atomic_preopcode: Holds preopcode when atomic sequence is requested
* @opcodes: Opcodes which are supported. This are programmed by BIOS
* before it locks down the controller.
*/
@@ -153,6 +154,7 @@ struct intel_spi {
bool swseq_reg;
bool swseq_erase;
bool erase_64k;
+ u8 atomic_preopcode;
u8 opcodes[8];
};
@@ -285,7 +287,7 @@ static int intel_spi_wait_hw_busy(struct intel_spi *ispi)
u32 val;
return readl_poll_timeout(ispi->base + HSFSTS_CTL, val,
- !(val & HSFSTS_CTL_SCIP), 0,
+ !(val & HSFSTS_CTL_SCIP), 40,
INTEL_SPI_TIMEOUT * 1000);
}
@@ -294,7 +296,7 @@ static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
u32 val;
return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val,
- !(val & SSFSTS_CTL_SCIP), 0,
+ !(val & SSFSTS_CTL_SCIP), 40,
INTEL_SPI_TIMEOUT * 1000);
}
@@ -474,7 +476,7 @@ static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len,
int optype)
{
u32 val = 0, status;
- u16 preop;
+ u8 atomic_preopcode;
int ret;
ret = intel_spi_opcode_index(ispi, opcode, optype);
@@ -484,17 +486,42 @@ static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len,
if (len > INTEL_SPI_FIFO_SZ)
return -EINVAL;
+ /*
+ * Always clear it after each SW sequencer operation regardless
+ * of whether it is successful or not.
+ */
+ atomic_preopcode = ispi->atomic_preopcode;
+ ispi->atomic_preopcode = 0;
+
/* Only mark 'Data Cycle' bit when there is data to be transferred */
if (len > 0)
val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
val |= ret << SSFSTS_CTL_COP_SHIFT;
val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE;
val |= SSFSTS_CTL_SCGO;
- preop = readw(ispi->sregs + PREOP_OPTYPE);
- if (preop) {
- val |= SSFSTS_CTL_ACS;
- if (preop >> 8)
- val |= SSFSTS_CTL_SPOP;
+ if (atomic_preopcode) {
+ u16 preop;
+
+ switch (optype) {
+ case OPTYPE_WRITE_NO_ADDR:
+ case OPTYPE_WRITE_WITH_ADDR:
+ /* Pick matching preopcode for the atomic sequence */
+ preop = readw(ispi->sregs + PREOP_OPTYPE);
+ if ((preop & 0xff) == atomic_preopcode)
+ ; /* Do nothing */
+ else if ((preop >> 8) == atomic_preopcode)
+ val |= SSFSTS_CTL_SPOP;
+ else
+ return -EINVAL;
+
+ /* Enable atomic sequence */
+ val |= SSFSTS_CTL_ACS;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
}
writel(val, ispi->sregs + SSFSTS_CTL);
@@ -538,13 +565,31 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
/*
* This is handled with atomic operation and preop code in Intel
- * controller so skip it here now. If the controller is not locked,
- * program the opcode to the PREOP register for later use.
+ * controller so we only verify that it is available. If the
+ * controller is not locked, program the opcode to the PREOP
+ * register for later use.
+ *
+ * When hardware sequencer is used there is no need to program
+ * any opcodes (it handles them automatically as part of a command).
*/
if (opcode == SPINOR_OP_WREN) {
- if (!ispi->locked)
+ u16 preop;
+
+ if (!ispi->swseq_reg)
+ return 0;
+
+ preop = readw(ispi->sregs + PREOP_OPTYPE);
+ if ((preop & 0xff) != opcode && (preop >> 8) != opcode) {
+ if (ispi->locked)
+ return -EINVAL;
writel(opcode, ispi->sregs + PREOP_OPTYPE);
+ }
+ /*
+ * This enables atomic sequence on next SW sycle. Will
+ * be cleared after next operation.
+ */
+ ispi->atomic_preopcode = opcode;
return 0;
}
@@ -569,6 +614,13 @@ static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len,
u32 val, status;
ssize_t ret;
+ /*
+ * Atomic sequence is not expected with HW sequencer reads. Make
+ * sure it is cleared regardless.
+ */
+ if (WARN_ON_ONCE(ispi->atomic_preopcode))
+ ispi->atomic_preopcode = 0;
+
switch (nor->read_opcode) {
case SPINOR_OP_READ:
case SPINOR_OP_READ_FAST:
@@ -627,6 +679,9 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
u32 val, status;
ssize_t ret;
+ /* Not needed with HW sequencer write, make sure it is cleared */
+ ispi->atomic_preopcode = 0;
+
while (len > 0) {
block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
@@ -707,6 +762,9 @@ static int intel_spi_erase(struct spi_nor *nor, loff_t offs)
return 0;
}
+ /* Not needed with HW sequencer erase, make sure it is cleared */
+ ispi->atomic_preopcode = 0;
+
while (len > 0) {
writel(offs, ispi->base + FADDR);
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 5bfa36e95f35..d9c368c44194 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -284,6 +284,20 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
if (need_wren)
write_disable(nor);
+ if (!status && !enable &&
+ JEDEC_MFR(info) == SNOR_MFR_WINBOND) {
+ /*
+ * On Winbond W25Q256FV, leaving 4byte mode causes
+ * the Extended Address Register to be set to 1, so all
+ * 3-byte-address reads come from the second 16M.
+ * We must clear the register to enable normal behavior.
+ */
+ write_enable(nor);
+ nor->cmd_buf[0] = 0;
+ nor->write_reg(nor, SPINOR_OP_WREAR, nor->cmd_buf, 1);
+ write_disable(nor);
+ }
+
return status;
default:
/* Spansion style */
@@ -980,6 +994,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
{ "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
+ { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) },
{ "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
{ "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
{ "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
@@ -1049,6 +1064,14 @@ static const struct flash_info spi_nor_ids[] = {
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
/* Macronix */
{ "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
@@ -1087,6 +1110,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
+ { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
/* PMC */
{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
@@ -1198,6 +1222,11 @@ static const struct flash_info spi_nor_ids[] = {
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
+ {
+ "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
{
@@ -1230,6 +1259,10 @@ static const struct flash_info spi_nor_ids[] = {
{ "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
{ "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
{ "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
+
+ /* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
+ { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ },
};
diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c
index b3c7f6addba7..72553506a00b 100644
--- a/drivers/mtd/spi-nor/stm32-quadspi.c
+++ b/drivers/mtd/spi-nor/stm32-quadspi.c
@@ -656,7 +656,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
return ret;
}
- rstc = devm_reset_control_get(dev, NULL);
+ rstc = devm_reset_control_get_exclusive(dev, NULL);
if (!IS_ERR(rstc)) {
reset_control_assert(rstc);
udelay(2);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 792ea5c26329..abe975c87b90 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -86,6 +86,7 @@ struct nand_pos {
* @ooboffs: the OOB offset within the page
* @ooblen: the number of OOB bytes to read from/write to this page
* @oobbuf: buffer to store OOB data in or get OOB data from
+ * @mode: one of the %MTD_OPS_XXX mode
*
* This object is used to pass per-page I/O requests to NAND sub-layers. This
* way all useful information are already formatted in a useful way and
@@ -106,6 +107,7 @@ struct nand_page_io_req {
const void *out;
void *in;
} oobbuf;
+ int mode;
};
/**
@@ -599,6 +601,7 @@ static inline void nanddev_io_iter_init(struct nand_device *nand,
{
struct mtd_info *mtd = nanddev_to_mtd(nand);
+ iter->req.mode = req->mode;
iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
iter->req.ooboffs = req->ooboffs;
iter->oobbytes_per_page = mtd_oobavail(mtd, req);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 17c919436f48..3e8ec3b8a39c 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -28,7 +28,14 @@ struct nand_flash_dev;
struct device_node;
/* Scan and identify a NAND device */
-int nand_scan(struct mtd_info *mtd, int max_chips);
+int nand_scan_with_ids(struct mtd_info *mtd, int max_chips,
+ struct nand_flash_dev *ids);
+
+static inline int nand_scan(struct mtd_info *mtd, int max_chips)
+{
+ return nand_scan_with_ids(mtd, max_chips, NULL);
+}
+
/*
* Separate phases of nand_scan(), allowing board driver to intervene
* and override command or ECC setup according to flash type.
@@ -740,8 +747,9 @@ enum nand_data_interface_type {
/**
* struct nand_data_interface - NAND interface timing
- * @type: type of the timing
- * @timings: The timing, type according to @type
+ * @type: type of the timing
+ * @timings: The timing, type according to @type
+ * @timings.sdr: Use it when @type is %NAND_SDR_IFACE.
*/
struct nand_data_interface {
enum nand_data_interface_type type;
@@ -798,8 +806,9 @@ struct nand_op_addr_instr {
/**
* struct nand_op_data_instr - Definition of a data instruction
* @len: number of data bytes to move
- * @in: buffer to fill when reading from the NAND chip
- * @out: buffer to read from when writing to the NAND chip
+ * @buf: buffer to fill
+ * @buf.in: buffer to fill when reading from the NAND chip
+ * @buf.out: buffer to read from when writing to the NAND chip
* @force_8bit: force 8-bit access
*
* Please note that "in" and "out" are inverted from the ONFI specification
@@ -842,9 +851,13 @@ enum nand_op_instr_type {
/**
* struct nand_op_instr - Instruction object
* @type: the instruction type
- * @cmd/@addr/@data/@waitrdy: extra data associated to the instruction.
- * You'll have to use the appropriate element
- * depending on @type
+ * @ctx: extra data associated to the instruction. You'll have to use the
+ * appropriate element depending on @type
+ * @ctx.cmd: use it if @type is %NAND_OP_CMD_INSTR
+ * @ctx.addr: use it if @type is %NAND_OP_ADDR_INSTR
+ * @ctx.data: use it if @type is %NAND_OP_DATA_IN_INSTR
+ * or %NAND_OP_DATA_OUT_INSTR
+ * @ctx.waitrdy: use it if @type is %NAND_OP_WAITRDY_INSTR
* @delay_ns: delay the controller should apply after the instruction has been
* issued on the bus. Most modern controllers have internal timings
* control logic, and in this case, the controller driver can ignore
@@ -1003,7 +1016,9 @@ struct nand_op_parser_data_constraints {
* struct nand_op_parser_pattern_elem - One element of a pattern
* @type: the instructuction type
* @optional: whether this element of the pattern is optional or mandatory
- * @addr/@data: address or data constraint (number of cycles or data length)
+ * @ctx: address or data constraint
+ * @ctx.addr: address constraint (number of cycles)
+ * @ctx.data: data constraint (data length)
*/
struct nand_op_parser_pattern_elem {
enum nand_op_instr_type type;
@@ -1230,6 +1245,8 @@ int nand_op_parser_exec_op(struct nand_chip *chip,
* devices.
* @priv: [OPTIONAL] pointer to private chip data
* @manufacturer: [INTERN] Contains manufacturer information
+ * @manufacturer.desc: [INTERN] Contains manufacturer's description
+ * @manufacturer.priv: [INTERN] Contains manufacturer private information
*/
struct nand_chip {
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index de36969eb359..e60da0d34cc1 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -62,6 +62,8 @@
#define SPINOR_OP_RDCR 0x35 /* Read configuration register */
#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */
#define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */
+#define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */
+#define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */
/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
#define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */