diff options
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 16 | ||||
| -rw-r--r-- | drivers/net/phy/micrel.c | 9 | ||||
| -rw-r--r-- | include/linux/micrel_phy.h | 1 |
3 files changed, 22 insertions, 4 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 6673122266b7..42db7679c360 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2335,13 +2335,27 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port) { struct ksz_device *dev = ds->priv; - if (dev->chip_id == KSZ8830_CHIP_ID) { + switch (dev->chip_id) { + case KSZ8830_CHIP_ID: /* Silicon Errata Sheet (DS80000830A): * Port 1 does not work with LinkMD Cable-Testing. * Port 1 does not respond to received PAUSE control frames. */ if (!port) return MICREL_KSZ8_P1_ERRATA; + break; + case KSZ9477_CHIP_ID: + /* KSZ9477 Errata DS80000754C + * + * Module 4: Energy Efficient Ethernet (EEE) feature select must + * be manually disabled + * The EEE feature is enabled by default, but it is not fully + * operational. It must be manually disabled through register + * controls. If not disabled, the PHY ports can auto-negotiate + * to enable EEE, and this feature can cause link drops when + * linked to another device supporting EEE. + */ + return MICREL_NO_EEE; } return 0; diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index b6d7981b2d1e..927d3d54658e 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -1800,9 +1800,6 @@ static const struct ksz9477_errata_write ksz9477_errata_writes[] = { /* Transmit waveform amplitude can be improved (1000BASE-T, 100BASE-TX, 10BASE-Te) */ {0x1c, 0x04, 0x00d0}, - /* Energy Efficient Ethernet (EEE) feature select must be manually disabled */ - {0x07, 0x3c, 0x0000}, - /* Register settings are required to meet data sheet supply current specifications */ {0x1c, 0x13, 0x6eff}, {0x1c, 0x14, 0xe6ff}, @@ -1847,6 +1844,12 @@ static int ksz9477_config_init(struct phy_device *phydev) return err; } + /* According to KSZ9477 Errata DS80000754C (Module 4) all EEE modes + * in this switch shall be regarded as broken. + */ + if (phydev->dev_flags & MICREL_NO_EEE) + phydev->eee_broken_modes = -1; + err = genphy_restart_aneg(phydev); if (err) return err; diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 322d87255984..4e27ca7c49de 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -44,6 +44,7 @@ #define MICREL_PHY_50MHZ_CLK BIT(0) #define MICREL_PHY_FXEN BIT(1) #define MICREL_KSZ8_P1_ERRATA BIT(2) +#define MICREL_NO_EEE BIT(3) #define MICREL_KSZ9021_EXTREG_CTRL 0xB #define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC |