summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/eeprom/at24.yaml9
-rw-r--r--Documentation/devicetree/bindings/eeprom/at25.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-at91.txt14
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-jz4780.txt4
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,i2c.txt3
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,iic.txt1
-rw-r--r--Documentation/devicetree/bindings/nvmem/nvmem.yaml11
-rw-r--r--Documentation/i2c/busses/i2c-parport-light.rst24
-rw-r--r--Documentation/i2c/busses/index.rst1
-rw-r--r--Documentation/i2c/dev-interface.rst24
-rw-r--r--Documentation/i2c/dma-considerations.rst2
-rw-r--r--Documentation/i2c/i2c-protocol.rst45
-rw-r--r--Documentation/i2c/i2c-topology.rst72
-rw-r--r--Documentation/i2c/i2c.svg1341
-rw-r--r--Documentation/i2c/index.rst58
-rw-r--r--Documentation/i2c/instantiating-devices.rst123
-rw-r--r--Documentation/i2c/old-module-parameters.rst31
-rw-r--r--Documentation/i2c/slave-interface.rst4
-rw-r--r--Documentation/i2c/smbus-protocol.rst107
-rw-r--r--Documentation/i2c/summary.rst62
-rw-r--r--Documentation/i2c/writing-clients.rst36
-rw-r--r--MAINTAINERS2
-rw-r--r--drivers/i2c/busses/Kconfig107
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-at91-core.c39
-rw-r--r--drivers/i2c/busses/i2c-cadence.c32
-rw-r--r--drivers/i2c/busses/i2c-cht-wc.c6
-rw-r--r--drivers/i2c/busses/i2c-cros-ec-tunnel.c3
-rw-r--r--drivers/i2c/busses/i2c-highlander.c2
-rw-r--r--drivers/i2c/busses/i2c-i801.c10
-rw-r--r--drivers/i2c/busses/i2c-jz4780.c156
-rw-r--r--drivers/i2c/busses/i2c-meson.c97
-rw-r--r--drivers/i2c/busses/i2c-nvidia-gpu.c6
-rw-r--r--drivers/i2c/busses/i2c-ocores.c2
-rw-r--r--drivers/i2c/busses/i2c-parport-light.c267
-rw-r--r--drivers/i2c/busses/i2c-parport.c113
-rw-r--r--drivers/i2c/busses/i2c-parport.h106
-rw-r--r--drivers/i2c/busses/i2c-pmcmsp.c6
-rw-r--r--drivers/i2c/busses/i2c-pnx.c4
-rw-r--r--drivers/i2c/busses/i2c-powermac.c8
-rw-r--r--drivers/i2c/busses/i2c-stm32f7.c117
-rw-r--r--drivers/i2c/busses/i2c-stu300.c2
-rw-r--r--drivers/i2c/busses/i2c-taos-evm.c4
-rw-r--r--drivers/i2c/busses/i2c-tegra.c178
-rw-r--r--drivers/i2c/busses/i2c-tiny-usb.c8
-rw-r--r--drivers/i2c/busses/i2c-xiic.c69
-rw-r--r--drivers/i2c/i2c-core-acpi.c12
-rw-r--r--drivers/i2c/i2c-core-base.c33
-rw-r--r--drivers/i2c/i2c-core-of.c7
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca9541.c29
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c69
-rw-r--r--drivers/misc/eeprom/at24.c72
-rw-r--r--drivers/nvmem/core.c19
-rw-r--r--drivers/nvmem/nvmem.h2
-rw-r--r--include/linux/i2c.h115
-rw-r--r--include/linux/nvmem-provider.h3
57 files changed, 2576 insertions, 1106 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index e8778560d966..0f6d8db18d6c 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -145,10 +145,7 @@ properties:
over reads to the next slave address. Please consult the manual of
your device.
- wp-gpios:
- description:
- GPIO to which the write-protect pin of the chip is connected.
- maxItems: 1
+ wp-gpios: true
address-width:
allOf:
@@ -167,6 +164,10 @@ properties:
minimum: 1
maximum: 8
+ vcc-supply:
+ description:
+ phandle of the regulator that provides the supply voltage.
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt
index 42577dd113dd..fcacd97abd0a 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.txt
+++ b/Documentation/devicetree/bindings/eeprom/at25.txt
@@ -20,6 +20,7 @@ Optional properties:
- spi-cpha : SPI shifted clock phase, as per spi-bus bindings.
- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
- read-only : this parameter-less property disables writes to the eeprom
+- wp-gpios : GPIO to which the write-protect pin of the chip is connected
Obsolete legacy properties can be used in place of "size", "pagesize",
"address-width", and "read-only":
@@ -36,6 +37,7 @@ Example:
spi-max-frequency = <5000000>;
spi-cpha;
spi-cpol;
+ wp-gpios = <&gpio1 3 0>;
pagesize = <64>;
size = <32768>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index 8347b1e7c080..d4bad86107b8 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -1,10 +1,16 @@
I2C for Atmel platforms
Required properties :
-- compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c",
- "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c",
- "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c", "atmel,sama5d2-i2c" or
- "microchip,sam9x60-i2c"
+- compatible : Must be one of:
+ "atmel,at91rm9200-i2c",
+ "atmel,at91sam9261-i2c",
+ "atmel,at91sam9260-i2c",
+ "atmel,at91sam9g20-i2c",
+ "atmel,at91sam9g10-i2c",
+ "atmel,at91sam9x5-i2c",
+ "atmel,sama5d4-i2c",
+ "atmel,sama5d2-i2c",
+ "microchip,sam9x60-i2c".
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
index 3738cfbf863f..d229eff5ca1b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
@@ -1,7 +1,9 @@
* Ingenic JZ4780 I2C Bus controller
Required properties:
-- compatible: should be "ingenic,jz4780-i2c"
+- compatible: should be one of the following:
+ - "ingenic,jz4780-i2c" for the JZ4780
+ - "ingenic,x1000-i2c" for the X1000
- reg: Should contain the address & size of the I2C controller registers.
- interrupts: Should specify the interrupt provided by parent.
- clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index 30ac6a60f041..7abda506b828 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -25,6 +25,8 @@ Required Properties:
Optional Properties:
- reset-gpios: Reference to the GPIO connected to the reset input.
+ - idle-state: if present, overrides i2c-mux-idle-disconnect,
+ Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
- i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
children in idle state. This is necessary for example, if there are several
multiplexers on the bus and the devices behind them use same I2C addresses.
diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
index 0660a3eb2547..c359965d0724 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
@@ -17,7 +17,8 @@ Required properties:
"renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC.
"renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
- "renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
+ "renesas,i2c-r8a7796" if the device is a part of a R8A77960 SoC.
+ "renesas,i2c-r8a77961" if the device is a part of a R8A77961 SoC.
"renesas,i2c-r8a77965" if the device is a part of a R8A77965 SoC.
"renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
"renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC.
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
index 64d11ffb07c4..ffe085c9947e 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,iic.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
@@ -17,6 +17,7 @@ Required properties:
- "renesas,iic-r8a7794" (R-Car E2)
- "renesas,iic-r8a7795" (R-Car H3)
- "renesas,iic-r8a7796" (R-Car M3-W)
+ - "renesas,iic-r8a77961" (R-Car M3-W+)
- "renesas,iic-r8a77965" (R-Car M3-N)
- "renesas,iic-r8a77990" (R-Car E3)
- "renesas,iic-sh73a0" (SH-Mobile AG5)
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 1c75a059206c..b43c6c65294e 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -34,6 +34,14 @@ properties:
description:
Mark the provider as read only.
+ wp-gpios:
+ description:
+ GPIO to which the write-protect pin of the chip is connected.
+ The write-protect GPIO is asserted, when it's driven high
+ (logical '1') to block the write operation. It's deasserted,
+ when it's driven low (logical '0') to allow writing.
+ maxItems: 1
+
patternProperties:
"^.*@[0-9a-f]+$":
type: object
@@ -63,9 +71,12 @@ patternProperties:
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
+
qfprom: eeprom@700000 {
#address-cells = <1>;
#size-cells = <1>;
+ wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
/* ... */
diff --git a/Documentation/i2c/busses/i2c-parport-light.rst b/Documentation/i2c/busses/i2c-parport-light.rst
deleted file mode 100644
index e73af975d2c8..000000000000
--- a/Documentation/i2c/busses/i2c-parport-light.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-===============================
-Kernel driver i2c-parport-light
-===============================
-
-Author: Jean Delvare <jdelvare@suse.de>
-
-This driver is a light version of i2c-parport. It doesn't depend
-on the parport driver, and uses direct I/O access instead. This might be
-preferred on embedded systems where wasting memory for the clean but heavy
-parport handling is not an option. The drawback is a reduced portability
-and the impossibility to daisy-chain other parallel port devices.
-
-Please see i2c-parport for documentation.
-
-Module parameters:
-
-* type: type of adapter (see i2c-parport or modinfo)
-
-* base: base I/O address
- Default is 0x378 which is fairly common for parallel ports, at least on PC.
-
-* irq: optional IRQ
- This must be passed if you want SMBus alert support, assuming your adapter
- actually supports this.
diff --git a/Documentation/i2c/busses/index.rst b/Documentation/i2c/busses/index.rst
index 2a26e251a335..5e4077b08d86 100644
--- a/Documentation/i2c/busses/index.rst
+++ b/Documentation/i2c/busses/index.rst
@@ -20,7 +20,6 @@ I2C Bus Drivers
i2c-nforce2
i2c-nvidia-gpu
i2c-ocores
- i2c-parport-light
i2c-parport
i2c-pca-isa
i2c-piix4
diff --git a/Documentation/i2c/dev-interface.rst b/Documentation/i2c/dev-interface.rst
index 69c23a3c2b1b..bdb247f2f11a 100644
--- a/Documentation/i2c/dev-interface.rst
+++ b/Documentation/i2c/dev-interface.rst
@@ -1,27 +1,27 @@
-====================
-I2C Device Interface
-====================
+============================================
+Implementing I2C device drivers in userspace
+============================================
-Usually, i2c devices are controlled by a kernel driver. But it is also
+Usually, I2C devices are controlled by a kernel driver. But it is also
possible to access all devices on an adapter from userspace, through
the /dev interface. You need to load module i2c-dev for this.
-Each registered i2c adapter gets a number, counting from 0. You can
+Each registered I2C adapter gets a number, counting from 0. You can
examine /sys/class/i2c-dev/ to see what number corresponds to which adapter.
Alternatively, you can run "i2cdetect -l" to obtain a formatted list of all
-i2c adapters present on your system at a given time. i2cdetect is part of
+I2C adapters present on your system at a given time. i2cdetect is part of
the i2c-tools package.
I2C device files are character device files with major device number 89
and a minor device number corresponding to the number assigned as
explained above. They should be called "i2c-%d" (i2c-0, i2c-1, ...,
-i2c-10, ...). All 256 minor device numbers are reserved for i2c.
+i2c-10, ...). All 256 minor device numbers are reserved for I2C.
C example
=========
-So let's say you want to access an i2c adapter from a C program.
+So let's say you want to access an I2C adapter from a C program.
First, you need to include these two headers::
#include <linux/i2c-dev.h>
@@ -66,7 +66,7 @@ the device supports them. Both are illustrated below::
/* Using SMBus commands */
res = i2c_smbus_read_word_data(file, reg);
if (res < 0) {
- /* ERROR HANDLING: i2c transaction failed */
+ /* ERROR HANDLING: I2C transaction failed */
} else {
/* res contains the read word */
}
@@ -79,12 +79,12 @@ the device supports them. Both are illustrated below::
buf[1] = 0x43;
buf[2] = 0x65;
if (write(file, buf, 3) != 3) {
- /* ERROR HANDLING: i2c transaction failed */
+ /* ERROR HANDLING: I2C transaction failed */
}
/* Using I2C Read, equivalent of i2c_smbus_read_byte(file) */
if (read(file, buf, 1) != 1) {
- /* ERROR HANDLING: i2c transaction failed */
+ /* ERROR HANDLING: I2C transaction failed */
} else {
/* buf[0] contains the read byte */
}
@@ -144,7 +144,7 @@ The following IOCTLs are defined:
If possible, use the provided ``i2c_smbus_*`` methods described below instead
of issuing direct ioctls.
-You can do plain i2c transactions by using read(2) and write(2) calls.
+You can do plain I2C transactions by using read(2) and write(2) calls.
You do not need to pass the address byte; instead, set it through
ioctl I2C_SLAVE before you try to access the device.
diff --git a/Documentation/i2c/dma-considerations.rst b/Documentation/i2c/dma-considerations.rst
index 203002054120..142d52ce9ebb 100644
--- a/Documentation/i2c/dma-considerations.rst
+++ b/Documentation/i2c/dma-considerations.rst
@@ -2,7 +2,7 @@
Linux I2C and DMA
=================
-Given that i2c is a low-speed bus, over which the majority of messages
+Given that I2C is a low-speed bus, over which the majority of messages
transferred are small, it is not considered a prime user of DMA access. At this
time of writing, only 10% of I2C bus master drivers have DMA support
implemented. And the vast majority of transactions are so small that setting up
diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst
index 2f8fcf671b2e..b2092f8f815d 100644
--- a/Documentation/i2c/i2c-protocol.rst
+++ b/Documentation/i2c/i2c-protocol.rst
@@ -1,26 +1,26 @@
-============
-I2C Protocol
-============
+================
+The I2C Protocol
+================
-This document describes the i2c protocol. Or will, when it is finished :-)
+This document describes the I2C protocol. Or will, when it is finished :-)
Key to symbols
==============
=============== =============================================================
-S (1 bit) : Start bit
-P (1 bit) : Stop bit
-Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
-A, NA (1 bit) : Accept and reverse accept bit.
-Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
+S Start condition
+P Stop condition
+Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0.
+A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit
+Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to
get a 10 bit I2C address.
-Comm (8 bits): Command byte, a data byte which often selects a register on
+Comm (8 bits) Command byte, a data byte which often selects a register on
the device.
-Data (8 bits): A plain data byte. Sometimes, I write DataLow, DataHigh
+Data (8 bits) A plain data byte. Sometimes, I write DataLow, DataHigh
for 16 bit data.
-Count (8 bits): A data byte containing the length of a block operation.
+Count (8 bits) A data byte containing the length of a block operation.
-[..]: Data sent by I2C device, as opposed to data sent by the
+[..] Data sent by I2C device, as opposed to data sent by the
host adapter.
=============== =============================================================
@@ -28,7 +28,7 @@ Count (8 bits): A data byte containing the length of a block operation.
Simple send transaction
=======================
-This corresponds to i2c_master_send::
+Implemented by i2c_master_send()::
S Addr Wr [A] Data [A] Data [A] ... [A] Data [A] P
@@ -36,7 +36,7 @@ This corresponds to i2c_master_send::
Simple receive transaction
==========================
-This corresponds to i2c_master_recv::
+Implemented by i2c_master_recv()::
S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
@@ -44,11 +44,11 @@ This corresponds to i2c_master_recv::
Combined transactions
=====================
-This corresponds to i2c_transfer
+Implemented by i2c_transfer().
-They are just like the above transactions, but instead of a stop bit P
-a start bit S is sent and the transaction continues. An example of
-a byte read, followed by a byte write::
+They are just like the above transactions, but instead of a stop
+condition P a start condition S is sent and the transaction continues.
+An example of a byte read, followed by a byte write::
S Addr Rd [A] [Data] NA S Addr Wr [A] Data [A] P
@@ -57,7 +57,7 @@ Modified transactions
=====================
The following modifications to the I2C protocol can also be generated by
-setting these flags for i2c messages. With the exception of I2C_M_NOSTART, they
+setting these flags for I2C messages. With the exception of I2C_M_NOSTART, they
are usually only needed to work around device issues:
I2C_M_IGNORE_NAK:
@@ -77,8 +77,9 @@ I2C_M_NOSTART:
S Addr Rd [A] [Data] NA Data [A] P
If you set the I2C_M_NOSTART variable for the first partial message,
- we do not generate Addr, but we do generate the startbit S. This will
- probably confuse all other clients on your bus, so don't try this.
+ we do not generate Addr, but we do generate the start condition S.
+ This will probably confuse all other clients on your bus, so don't
+ try this.
This is often used to gather transmits from multiple data buffers in
system memory into something that appears as a single transfer to the
diff --git a/Documentation/i2c/i2c-topology.rst b/Documentation/i2c/i2c-topology.rst
index 0c1ae95f6a97..7cb53819778e 100644
--- a/Documentation/i2c/i2c-topology.rst
+++ b/Documentation/i2c/i2c-topology.rst
@@ -1,9 +1,9 @@
-============
-I2C topology
-============
+================================
+I2C muxes and complex topologies
+================================
-There are a couple of reasons for building more complex i2c topologies
-than a straight-forward i2c bus with one adapter and one or more devices.
+There are a couple of reasons for building more complex I2C topologies
+than a straight-forward I2C bus with one adapter and one or more devices.
1. A mux may be needed on the bus to prevent address collisions.
@@ -11,20 +11,20 @@ than a straight-forward i2c bus with one adapter and one or more devices.
may be needed to determine if it is ok to access the bus.
3. A device (particularly RF tuners) may want to avoid the digital noise
- from the i2c bus, at least most of the time, and sits behind a gate
+ from the I2C bus, at least most of the time, and sits behind a gate
that has to be operated before the device can be accessed.
Etc
===
-These constructs are represented as i2c adapter trees by Linux, where
+These constructs are represented as I2C adapter trees by Linux, where
each adapter has a parent adapter (except the root adapter) and zero or
more child adapters. The root adapter is the actual adapter that issues
-i2c transfers, and all adapters with a parent are part of an "i2c-mux"
+I2C transfers, and all adapters with a parent are part of an "i2c-mux"
object (quoted, since it can also be an arbitrator or a gate).
Depending of the particular mux driver, something happens when there is
-an i2c transfer on one of its child adapters. The mux driver can
+an I2C transfer on one of its child adapters. The mux driver can
obviously operate a mux, but it can also do arbitration with an external
bus master or open a gate. The mux driver has two operations for this,
select and deselect. select is called before the transfer and (the
@@ -34,7 +34,7 @@ optional) deselect is called after the transfer.
Locking
=======
-There are two variants of locking available to i2c muxes, they can be
+There are two variants of locking available to I2C muxes, they can be
mux-locked or parent-locked muxes. As is evident from below, it can be
useful to know if a mux is mux-locked or if it is parent-locked. The
following list was correct at the time of writing:
@@ -45,7 +45,7 @@ In drivers/i2c/muxes/:
i2c-arb-gpio-challenge Parent-locked
i2c-mux-gpio Normally parent-locked, mux-locked iff
all involved gpio pins are controlled by the
- same i2c root adapter that they mux.
+ same I2C root adapter that they mux.
i2c-mux-gpmux Normally parent-locked, mux-locked iff
specified in device-tree.
i2c-mux-ltc4306 Mux-locked
@@ -54,7 +54,7 @@ i2c-mux-pca9541 Parent-locked
i2c-mux-pca954x Parent-locked
i2c-mux-pinctrl Normally parent-locked, mux-locked iff
all involved pinctrl devices are controlled
- by the same i2c root adapter that they mux.
+ by the same I2C root adapter that they mux.
i2c-mux-reg Parent-locked
====================== =============================================
@@ -83,9 +83,9 @@ Mux-locked muxes
Mux-locked muxes does not lock the entire parent adapter during the
full select-transfer-deselect transaction, only the muxes on the parent
adapter are locked. Mux-locked muxes are mostly interesting if the
-select and/or deselect operations must use i2c transfers to complete
+select and/or deselect operations must use I2C transfers to complete
their tasks. Since the parent adapter is not fully locked during the
-full transaction, unrelated i2c transfers may interleave the different
+full transaction, unrelated I2C transfers may interleave the different
stages of the transaction. This has the benefit that the mux driver
may be easier and cleaner to implement, but it has some caveats.
@@ -109,14 +109,14 @@ ML2. It is not safe to build arbitrary topologies with two (or more)
ML3. A mux-locked mux cannot be used by a driver for auto-closing
gates/muxes, i.e. something that closes automatically after a given
- number (one, in most cases) of i2c transfers. Unrelated i2c transfers
+ number (one, in most cases) of I2C transfers. Unrelated I2C transfers
may creep in and close prematurely.
-ML4. If any non-i2c operation in the mux driver changes the i2c mux state,
+ML4. If any non-I2C operation in the mux driver changes the I2C mux state,
the driver has to lock the root adapter during that operation.
Otherwise garbage may appear on the bus as seen from devices
- behind the mux, when an unrelated i2c transfer is in flight during
- the non-i2c mux-changing operation.
+ behind the mux, when an unrelated I2C transfer is in flight during
+ the non-I2C mux-changing operation.
==== =====================================================================
@@ -137,14 +137,14 @@ Mux-locked Example
When there is an access to D1, this happens:
- 1. Someone issues an i2c-transfer to D1.
+ 1. Someone issues an I2C transfer to D1.
2. M1 locks muxes on its parent (the root adapter in this case).
3. M1 calls ->select to ready the mux.
- 4. M1 (presumably) does some i2c-transfers as part of its select.
- These transfers are normal i2c-transfers that locks the parent
+ 4. M1 (presumably) does some I2C transfers as part of its select.
+ These transfers are normal I2C transfers that locks the parent
adapter.
- 5. M1 feeds the i2c-transfer from step 1 to its parent adapter as a
- normal i2c-transfer that locks the parent adapter.
+ 5. M1 feeds the I2C transfer from step 1 to its parent adapter as a
+ normal I2C transfer that locks the parent adapter.
6. M1 calls ->deselect, if it has one.
7. Same rules as in step 4, but for ->deselect.
8. M1 unlocks muxes on its parent.
@@ -159,8 +159,8 @@ Parent-locked muxes
Parent-locked muxes lock the parent adapter during the full select-
transfer-deselect transaction. The implication is that the mux driver
-has to ensure that any and all i2c transfers through that parent
-adapter during the transaction are unlocked i2c transfers (using e.g.
+has to ensure that any and all I2C transfers through that parent
+adapter during the transaction are unlocked I2C transfers (using e.g.
__i2c_transfer), or a deadlock will follow. There are a couple of
caveats.
@@ -169,12 +169,12 @@ PL1. If you build a topology with a parent-locked mux being the child
of another mux, this might break a possible assumption from the
child mux that the root adapter is unused between its select op
and the actual transfer (e.g. if the child mux is auto-closing
- and the parent mux issus i2c-transfers as part of its select).
+ and the parent mux issues I2C transfers as part of its select).
This is especially the case if the parent mux is mux-locked, but
it may also happen if the parent mux is parent-locked.
PL2. If select/deselect calls out to other subsystems such as gpio,
- pinctrl, regmap or iio, it is essential that any i2c transfers
+ pinctrl, regmap or iio, it is essential that any I2C transfers
caused by these subsystems are unlocked. This can be convoluted to
accomplish, maybe even impossible if an acceptably clean solution
is sought.
@@ -197,15 +197,15 @@ Parent-locked Example
When there is an access to D1, this happens:
- 1. Someone issues an i2c-transfer to D1.
+ 1. Someone issues an I2C transfer to D1.
2. M1 locks muxes on its parent (the root adapter in this case).
3. M1 locks its parent adapter.
4. M1 calls ->select to ready the mux.
- 5. If M1 does any i2c-transfers (on this root adapter) as part of
- its select, those transfers must be unlocked i2c-transfers so
+ 5. If M1 does any I2C transfers (on this root adapter) as part of
+ its select, those transfers must be unlocked I2C transfers so
that they do not deadlock the root adapter.
- 6. M1 feeds the i2c-transfer from step 1 to the root adapter as an
- unlocked i2c-transfer, so that it does not deadlock the parent
+ 6. M1 feeds the I2C transfer from step 1 to the root adapter as an
+ unlocked I2C transfer, so that it does not deadlock the parent
adapter.
7. M1 calls ->deselect, if it has one.
8. Same rules as in step 5, but for ->deselect.
@@ -240,7 +240,7 @@ and specifically when M2 requests its parent to lock, M1 passes
the buck to the root adapter).
This topology is bad if M2 is an auto-closing mux and M1->select
-issues any unlocked i2c transfers on the root adapter that may leak
+issues any unlocked I2C transfers on the root adapter that may leak
through and be seen by the M2 adapter, thus closing M2 prematurely.
@@ -286,14 +286,14 @@ point.
This kind of topology is generally not suitable and should probably
be avoided. The reason is that M2 probably assumes that there will
-be no i2c transfers during its calls to ->select and ->deselect, and
+be no I2C transfers during its calls to ->select and ->deselect, and
if there are, any such transfers might appear on the slave side of M2
-as partial i2c transfers, i.e. garbage or worse. This might cause
+as partial I2C transfers, i.e. garbage or worse. This might cause
device lockups and/or other problems.
The topology is especially troublesome if M2 is an auto-closing
mux. In that case, any interleaved accesses to D4 might close M2
-prematurely, as might any i2c-transfers part of M1->select.
+prematurely, as might any I2C transfers part of M1->select.
But if M2 is not making the above stated assumption, and if M2 is not
auto-closing, the topology is fine.
diff --git a/Documentation/i2c/i2c.svg b/Documentation/i2c/i2c.svg
new file mode 100644
index 000000000000..5979405ad1c3
--- /dev/null
+++ b/Documentation/i2c/i2c.svg
@@ -0,0 +1,1341 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+ xmlns:dc="http://purl.org/dc/elements/1.1/"
+ xmlns:cc="http://creativecommons.org/ns#"
+ xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ sodipodi:docname="i2c.svg"
+ inkscape:version="0.92.3 (2405546, 2018-03-11)"
+ version="1.1"
+ id="svg2"
+ viewBox="0 0 813.34215 261.01596"
+ height="73.664505mm"
+ width="229.54323mm">
+ <defs
+ id="defs4">
+ <marker
+ inkscape:stockid="DotM"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker8861"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path8859"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+ </marker>
+ <marker
+ inkscape:isstock="true"
+ style="overflow:visible"
+ id="marker6165"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="DotM"
+ inkscape:collect="always">
+ <path
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ id="path6163"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:isstock="true"
+ style="overflow:visible"
+ id="marker2713"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="DotM">
+ <path
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ id="path2711"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="DotM"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="DotM"
+ style="overflow:visible"
+ inkscape:isstock="true"
+ inkscape:collect="always">
+ <path
+ id="path1795"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:isstock="true"
+ style="overflow:visible"
+ id="marker6389"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path6387"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="TriangleOutM"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="TriangleOutM"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path4107"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="scale(0.4)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="TriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker5333"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path5335"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="scale(0.8)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="TriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="TriangleOutL"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path5049"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="scale(0.8)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="DotS"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="DotS"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path9326"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ style="fill:#404040;fill-opacity:1;fill-rule:evenodd;stroke:#404040;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.2,0,0,0.2,1.48,0.2)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mstart"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mstart"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path9283"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(0.6)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path9097"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker8935"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path8937"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker8781"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path8783"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Lend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Lend"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path4700"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="matrix(-1.1,0,0,-1.1,-1.1,0)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="EmptyTriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="EmptyTriangleOutL"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ id="path4502"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.8,0,0,0.8,-4.8,0)"
+ inkscape:connector-curvature="0" />
+ </marker>
+ <marker
+ inkscape:stockid="EmptyTriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="EmptyTriangleOutL-4"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4502-7"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+ </marker>
+ <marker
+ inkscape:stockid="EmptyTriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="EmptyTriangleOutL-4-4"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4502-7-5"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+ </marker>
+ <marker
+ inkscape:stockid="EmptyTriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="EmptyTriangleOutL-7"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4502-5"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+ </marker>
+ <marker
+ inkscape:stockid="EmptyTriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="EmptyTriangleOutL-6"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4502-2"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+ </marker>
+ <marker
+ inkscape:stockid="EmptyTriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="EmptyTriangleOutL-78"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4502-57"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+ </marker>
+ <marker
+ inkscape:stockid="EmptyTriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="EmptyTriangleOutL-1"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4502-8"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+ </marker>
+ <marker
+ inkscape:stockid="EmptyTriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="EmptyTriangleOutL-9"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4502-75"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+ </marker>
+ <marker
+ inkscape:stockid="EmptyTriangleOutL"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="EmptyTriangleOutL-78-2"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4502-57-6"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.8,0,0,0.8,-4.8,0)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-3"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-6"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-3-5"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-6-3"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-3-5-6"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-6-3-2"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-3-5-6-1"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-6-3-2-2"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-3-5-7"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-6-3-0"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-3-9"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-6-36"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-31"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-9"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-3-5-7-5"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-6-3-0-4"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-3-9-6"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-6-36-5"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mend-3-5-7-3"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4369-6-3-0-5"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-3"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-1"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-3-7"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-1-8"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6-6"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1-3"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-2"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-0"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6-5"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1-5"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-4"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-7"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6-5-9"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1-5-3"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6-5-4"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1-5-5"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6-5-4-4"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1-5-5-3"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6-5-4-4-9"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1-5-5-3-2"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6-5-4-4-6"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1-5-5-3-8"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6-5-4-4-2"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1-5-5-3-7"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-3"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-6"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-6-5-4-4-6-5"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-1-5-5-3-8-3"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-27"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-09"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-27-6"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-09-2"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-27-0"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-09-23"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-9"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-7"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-4-6"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-7-7"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-4-6-3"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-7-7-5"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-4-6-2"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-7-7-9"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="TriangleOutM"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="TriangleOutM-2"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path4107-7"
+ d="M 5.77,0 -2.88,5 V -5 Z"
+ style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="scale(0.4)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mstart"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="Arrow2Mstart-9"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9283-3"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="Arrow2Mend"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="marker9095-1-5-4-6-6"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path9097-2-0-7-7-0"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ transform="scale(-0.6)" />
+ </marker>
+ <marker
+ inkscape:stockid="DotM"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="DotM-3"
+ style="overflow:visible"
+ inkscape:isstock="true">
+ <path
+ inkscape:connector-curvature="0"
+ id="path1795-7"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+ </marker>
+ <marker
+ inkscape:isstock="true"
+ style="overflow:visible"
+ id="marker2713-9"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="DotM">
+ <path
+ inkscape:connector-curvature="0"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ id="path2711-2" />
+ </marker>
+ <marker
+ inkscape:stockid="DotM"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="DotM-2"
+ style="overflow:visible"
+ inkscape:isstock="true"
+ inkscape:collect="always">
+ <path
+ inkscape:connector-curvature="0"
+ id="path1795-8"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+ </marker>
+ <marker
+ inkscape:isstock="true"
+ style="overflow:visible"
+ id="marker2713-3"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="DotM">
+ <path
+ inkscape:connector-curvature="0"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ id="path2711-6" />
+ </marker>
+ <marker
+ inkscape:stockid="DotM"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="DotM-1"
+ style="overflow:visible"
+ inkscape:isstock="true"
+ inkscape:collect="always">
+ <path
+ inkscape:connector-curvature="0"
+ id="path1795-2"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+ </marker>
+ <marker
+ inkscape:isstock="true"
+ style="overflow:visible"
+ id="marker2713-94"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="DotM">
+ <path
+ inkscape:connector-curvature="0"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ id="path2711-7" />
+ </marker>
+ <marker
+ inkscape:stockid="DotM"
+ orient="auto"
+ refY="0"
+ refX="0"
+ id="DotM-8"
+ style="overflow:visible"
+ inkscape:isstock="true"
+ inkscape:collect="always">
+ <path
+ inkscape:connector-curvature="0"
+ id="path1795-4"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)" />
+ </marker>
+ <marker
+ inkscape:isstock="true"
+ style="overflow:visible"
+ id="marker2713-36"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="DotM">
+ <path
+ inkscape:connector-curvature="0"
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ id="path2711-1" />
+ </marker>
+ <marker
+ inkscape:isstock="true"
+ style="overflow:visible"
+ id="marker6165-5"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="DotM">
+ <path
+ transform="matrix(0.4,0,0,0.4,2.96,0.4)"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1"
+ d="m -2.5,-1 c 0,2.76 -2.24,5 -5,5 -2.76,0 -5,-2.24 -5,-5 0,-2.76 2.24,-5 5,-5 2.76,0 5,2.24 5,5 z"
+ id="path6163-5"
+ inkscape:connector-curvature="0" />
+ </marker>
+ </defs>
+ <sodipodi:namedview
+ showguides="true"
+ inkscape:window-maximized="1"
+ inkscape:window-y="0"
+ inkscape:window-x="0"
+ inkscape:window-height="1015"
+ inkscape:window-width="1920"
+ showgrid="true"
+ inkscape:current-layer="layer1"
+ inkscape:document-units="px"
+ inkscape:cy="214.66765"
+ inkscape:cx="-167.56857"
+ inkscape:zoom="0.70710678"
+ inkscape:pageshadow="2"
+ inkscape:pageopacity="0.0"
+ borderopacity="1.0"
+ bordercolor="#666666"
+ pagecolor="#ffffff"
+ id="base"
+ inkscape:snap-to-guides="true"
+ inkscape:snap-grids="true"
+ inkscape:snap-bbox="false"
+ inkscape:object-nodes="true"
+ fit-margin-top="5"
+ fit-margin-left="5"
+ fit-margin-right="5"
+ fit-margin-bottom="5">
+ <inkscape:grid
+ type="xygrid"
+ id="grid4451"
+ originx="-93.377219"
+ originy="-347.2523" />
+ </sodipodi:namedview>
+ <metadata
+ id="metadata7">
+ <rdf:RDF>
+ <cc:Work
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ <dc:title></dc:title>
+ <dc:creator>
+ <cc:Agent>
+ <dc:title>Luca Ceresoli</dc:title>
+ </cc:Agent>
+ </dc:creator>
+ <dc:date>2020</dc:date>
+ <cc:license
+ rdf:resource="http://creativecommons.org/licenses/by-sa/4.0/" />
+ </cc:Work>
+ <cc:License
+ rdf:about="http://creativecommons.org/licenses/by-sa/4.0/">
+ <cc:permits
+ rdf:resource="http://creativecommons.org/ns#Reproduction" />
+ <cc:permits
+ rdf:resource="http://creativecommons.org/ns#Distribution" />
+ <cc:requires
+ rdf:resource="http://creativecommons.org/ns#Notice" />
+ <cc:requires
+ rdf:resource="http://creativecommons.org/ns#Attribution" />
+ <cc:permits
+ rdf:resource="http://creativecommons.org/ns#DerivativeWorks" />
+ <cc:requires
+ rdf:resource="http://creativecommons.org/ns#ShareAlike" />
+ </cc:License>
+ </rdf:RDF>
+ </metadata>
+ <g
+ inkscape:label="Livello 1"
+ inkscape:groupmode="layer"
+ id="layer1"
+ transform="translate(-93.377215,-444.09395)">
+ <rect
+ style="opacity:1;fill:#ffb9b9;fill-opacity:1;stroke:#f00000;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+ id="rect4424-3-2-9-7"
+ width="112.5"
+ height="113.75008"
+ x="112.5"
+ y="471.11221"
+ rx="0"
+ ry="0" />
+ <text
+ xml:space="preserve"
+ style="font-style:normal;font-weight:normal;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="167.5354"
+ y="521.46259"
+ id="text4349"><tspan
+ sodipodi:role="line"
+ x="167.5354"
+ y="521.46259"
+ style="font-size:25px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle"
+ id="tspan1273">I2C</tspan><tspan
+ sodipodi:role="line"
+ x="167.5354"
+ y="552.71259"
+ style="font-size:25px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle"
+ id="tspan1285">Master</tspan></text>
+ <rect
+ style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
+ id="rect4424-3-2-9-7-3-3-5-3"
+ width="112.49998"
+ height="112.50001"
+ x="262.5"
+ y="471.11218"
+ rx="0"
+ ry="0" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968767;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+ d="m 112.50002,639.86223 c 712.50002,0 712.50002,0 712.50002,0"
+ id="path4655-9-3-65-5-6"
+ inkscape:connector-curvature="0" />
+ <text
+ xml:space="preserve"
+ style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="318.59131"
+ y="520.83752"
+ id="text4349-26"><tspan
+ sodipodi:role="line"
+ x="318.59131"
+ y="520.83752"
+ style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+ id="tspan1273-8">I2C</tspan><tspan
+ sodipodi:role="line"
+ x="318.59131"
+ y="552.08752"
+ style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+ id="tspan1287">Slave</tspan></text>
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968767;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+ d="m 112.49995,677.36223 c 712.50005,0 712.50005,0 712.50005,0"
+ id="path4655-9-3-65-5-6-2"
+ inkscape:connector-curvature="0" />
+ <text
+ xml:space="preserve"
+ style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="861.07312"
+ y="687.03937"
+ id="text4349-7"><tspan
+ sodipodi:role="line"
+ x="861.07312"
+ y="687.03937"
+ style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;writing-mode:lr-tb;direction:ltr;text-anchor:middle;stroke-width:1px"
+ id="tspan1285-9">SCL</tspan></text>
+ <flowRoot
+ xml:space="preserve"
+ id="flowRoot1627"
+ style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:Sans;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"><flowRegion
+ id="flowRegion1629"><rect
+ id="rect1631"
+ width="220"
+ height="120"
+ x="140"
+ y="-126.29921" /></flowRegion><flowPara
+ id="flowPara1633" /></flowRoot> <text
+ xml:space="preserve"
+ style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="863.31921"
+ y="648.96735"
+ id="text4349-7-3"><tspan
+ sodipodi:role="line"
+ x="863.31921"
+ y="648.96735"
+ style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+ id="tspan1285-9-6">SDA</tspan></text>
+ <rect
+ style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
+ id="rect4424-3-2-9-7-3-3-5-3-0"
+ width="112.49998"
+ height="112.50002"
+ x="412.5"
+ y="471.11215"
+ rx="0"
+ ry="0" />
+ <text
+ xml:space="preserve"
+ style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="468.59131"
+ y="520.83746"
+ id="text4349-26-6"><tspan
+ sodipodi:role="line"
+ x="468.59131"
+ y="520.83746"
+ style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+ id="tspan1273-8-2">I2C</tspan><tspan
+ sodipodi:role="line"
+ x="468.59131"
+ y="552.08746"
+ style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+ id="tspan1287-6">Slave</tspan></text>
+ <rect
+ style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
+ id="rect4424-3-2-9-7-3-3-5-3-1"
+ width="112.49998"
+ height="112.50002"
+ x="562.5"
+ y="471.11215"
+ rx="0"
+ ry="0" />
+ <text
+ xml:space="preserve"
+ style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="618.59131"
+ y="520.83746"
+ id="text4349-26-8"><tspan
+ sodipodi:role="line"
+ x="618.59131"
+ y="520.83746"
+ style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+ id="tspan1273-8-7">I2C</tspan><tspan
+ sodipodi:role="line"
+ x="618.59131"
+ y="552.08746"
+ style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+ id="tspan1287-9">Slave</tspan></text>
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM)"
+ d="m 150,583.61221 v 93.75"
+ id="path4655-9-3-65-5-6-20"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cc" />
+ <path
+ style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713)"
+ d="m 187.5,583.61221 v 56.25"
+ id="path4655-9-3-65-5-6-20-2"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM-2)"
+ d="m 300,583.61221 v 93.75"
+ id="path4655-9-3-65-5-6-20-9"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cc" />
+ <path
+ style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713-9)"
+ d="m 337.5,583.61221 v 56.25"
+ id="path4655-9-3-65-5-6-20-2-7"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM-1)"
+ d="m 450,583.61221 v 93.75"
+ id="path4655-9-3-65-5-6-20-93"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cc" />
+ <path
+ style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713-3)"
+ d="m 487.5,583.61221 v 56.25"
+ id="path4655-9-3-65-5-6-20-2-1"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM-8)"
+ d="m 600,583.61221 v 93.75"
+ id="path4655-9-3-65-5-6-20-5"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cc" />
+ <path
+ style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#marker2713-94)"
+ d="m 637.5,583.61221 v 56.25"
+ id="path4655-9-3-65-5-6-20-2-0"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cc" />
+ <path
+ style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-start:url(#marker6165);marker-end:url(#marker6165)"
+ d="m 750,471.11221 v 28.125 l 9.375,9.375 -18.74999,18.75 18.74999,18.75 -18.74999,18.75 18.74999,18.75 -9.375,9.375 v 28.125 0 0 56.25"
+ id="path6135"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cccccccccccc" />
+ <path
+ style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-start:url(#marker8861);marker-end:url(#marker6165-5)"
+ d="m 787.49999,471.11221 v 28.125 l 9.375,9.375 -18.74999,18.75 18.74999,18.75 -18.74999,18.75 18.74999,18.75 -9.375,9.375 v 28.125 0 0 18.75001"
+ id="path6135-4"
+ inkscape:connector-curvature="0"
+ sodipodi:nodetypes="cccccccccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968719;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+ d="m 712.5,471.11221 c 112.49999,0 112.49999,0 112.49999,0"
+ id="path4655-9-3-65-5-6-7"
+ inkscape:connector-curvature="0" />
+ <text
+ xml:space="preserve"
+ style="font-style:normal;font-weight:normal;font-size:12px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="859.94275"
+ y="480.03558"
+ id="text4349-7-3-6"><tspan
+ sodipodi:role="line"
+ x="859.94275"
+ y="480.03558"
+ style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
+ id="tspan1285-9-6-5">V<tspan
+ style="font-size:64.99999762%;baseline-shift:sub"
+ id="tspan9307">DD</tspan></tspan></text>
+ </g>
+</svg>
diff --git a/Documentation/i2c/index.rst b/Documentation/i2c/index.rst
index a0fbaf6d0675..fee4744475df 100644
--- a/Documentation/i2c/index.rst
+++ b/Documentation/i2c/index.rst
@@ -4,30 +4,66 @@
I2C/SMBus Subsystem
===================
+Introduction
+============
+
.. toctree::
:maxdepth: 1
+ summary
+ i2c-protocol
+ smbus-protocol
+ instantiating-devices
+ busses/index
+ i2c-topology
+ muxes/i2c-mux-gpio
+
+Writing device drivers
+======================
+
+.. toctree::
+ :maxdepth: 1
+
+ writing-clients
dev-interface
dma-considerations
fault-codes
functionality
+
+Debugging
+=========
+
+.. toctree::
+ :maxdepth: 1
+
gpio-fault-injection
- i2c-protocol
i2c-stub
- i2c-topology
- instantiating-devices
- old-module-parameters
- slave-eeprom-backend
+
+Slave I2C
+=========
+
+.. toctree::
+ :maxdepth: 1
+
slave-interface
- smbus-protocol
- summary
+ slave-eeprom-backend
+
+Advanced topics
+===============
+
+.. toctree::
+ :maxdepth: 1
+
ten-bit-addresses
- upgrading-clients
- writing-clients
- muxes/i2c-mux-gpio
+Legacy documentation
+====================
- busses/index
+.. toctree::
+ :maxdepth: 1
+
+ upgrading-clients
+ old-module-parameters
.. only:: subproject and html
diff --git a/Documentation/i2c/instantiating-devices.rst b/Documentation/i2c/instantiating-devices.rst
index 875ebe9e78e3..e558e0a77e0c 100644
--- a/Documentation/i2c/instantiating-devices.rst
+++ b/Documentation/i2c/instantiating-devices.rst
@@ -9,54 +9,27 @@ reason, the kernel code must instantiate I2C devices explicitly. There are
several ways to achieve this, depending on the context and requirements.
-Method 1a: Declare the I2C devices by bus number
-------------------------------------------------
+Method 1: Declare the I2C devices statically
+--------------------------------------------
This method is appropriate when the I2C bus is a system bus as is the case
-for many embedded systems. On such systems, each I2C bus has a number
-which is known in advance. It is thus possible to pre-declare the I2C
-devices which live on this bus. This is done with an array of struct
-i2c_board_info which is registered by calling i2c_register_board_info().
+for many embedded systems. On such systems, each I2C bus has a number which
+is known in advance. It is thus possible to pre-declare the I2C devices
+which live on this bus.
-Example (from omap2 h4)::
+This information is provided to the kernel in a different way on different
+architectures: device tree, ACPI or board files.
- static struct i2c_board_info h4_i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("isp1301_omap", 0x2d),
- .irq = OMAP_GPIO_IRQ(125),
- },
- { /* EEPROM on mainboard */
- I2C_BOARD_INFO("24c01", 0x52),
- .platform_data = &m24c01,
- },
- { /* EEPROM on cpu card */
- I2C_BOARD_INFO("24c01", 0x57),
- .platform_data = &m24c01,
- },
- };
-
- static void __init omap_h4_init(void)
- {
- (...)
- i2c_register_board_info(1, h4_i2c_board_info,
- ARRAY_SIZE(h4_i2c_board_info));
- (...)
- }
-
-The above code declares 3 devices on I2C bus 1, including their respective
-addresses and custom data needed by their drivers. When the I2C bus in
-question is registered, the I2C devices will be instantiated automatically
-by i2c-core.
+When the I2C bus in question is registered, the I2C devices will be
+instantiated automatically by i2c-core. The devices will be automatically
+unbound and destroyed when the I2C bus they sit on goes away (if ever).
-The devices will be automatically unbound and destroyed when the I2C bus
-they sit on goes away (if ever.)
+Declare the I2C devices via devicetree
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Method 1b: Declare the I2C devices via devicetree
--------------------------------------------------
-
-This method has the same implications as method 1a. The declaration of I2C
-devices is here done via devicetree as subnodes of the master controller.
+On platforms using devicetree, the declaration of I2C devices is done in
+subnodes of the master controller.
Example::
@@ -82,11 +55,49 @@ additional properties which might be needed to set up the device, please refer
to its devicetree documentation in Documentation/devicetree/bindings/.
-Method 1c: Declare the I2C devices via ACPI
--------------------------------------------
+Declare the I2C devices via ACPI
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ACPI can also describe I2C devices. There is special documentation for this
-which is currently located at Documentation/firmware-guide/acpi/enumeration.rst.
+which is currently located at :doc:`../firmware-guide/acpi/enumeration`.
+
+
+Declare the I2C devices in board files
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In many embedded architectures, devicetree has replaced the old hardware
+description based on board files, but the latter are still used in old
+code. Instantiating I2C devices via board files is done with an array of
+struct i2c_board_info which is registered by calling
+i2c_register_board_info().
+
+Example (from omap2 h4)::
+
+ static struct i2c_board_info h4_i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("isp1301_omap", 0x2d),
+ .irq = OMAP_GPIO_IRQ(125),
+ },
+ { /* EEPROM on mainboard */
+ I2C_BOARD_INFO("24c01", 0x52),
+ .platform_data = &m24c01,
+ },
+ { /* EEPROM on cpu card */
+ I2C_BOARD_INFO("24c01", 0x57),
+ .platform_data = &m24c01,
+ },
+ };
+
+ static void __init omap_h4_init(void)
+ {
+ (...)
+ i2c_register_board_info(1, h4_i2c_board_info,
+ ARRAY_SIZE(h4_i2c_board_info));
+ (...)
+ }
+
+The above code declares 3 devices on I2C bus 1, including their respective
+addresses and custom data needed by their drivers.
Method 2: Instantiate the devices explicitly
@@ -98,7 +109,7 @@ tuner, a video decoder, an audio decoder, etc. usually connected to the
main chip by the means of an I2C bus. You won't know the number of the I2C
bus in advance, so the method 1 described above can't be used. Instead,
you can instantiate your I2C devices explicitly. This is done by filling
-a struct i2c_board_info and calling i2c_new_device().
+a struct i2c_board_info and calling i2c_new_client_device().
Example (from the sfe4001 network driver)::
@@ -110,7 +121,7 @@ Example (from the sfe4001 network driver)::
{
(...)
efx->board_info.hwmon_client =
- i2c_new_device(&efx->i2c_adap, &sfe4001_hwmon_info);
+ i2c_new_client_device(&efx->i2c_adap, &sfe4001_hwmon_info);
(...)
}
@@ -123,7 +134,7 @@ present or not (for example for an optional feature which is not present
on cheap variants of a board but you have no way to tell them apart), or
it may have different addresses from one board to the next (manufacturer
changing its design without notice). In this case, you can call
-i2c_new_scanned_device() instead of i2c_new_device().
+i2c_new_scanned_device() instead of i2c_new_client_device().
Example (from the nxp OHCI driver)::
@@ -152,7 +163,7 @@ simply gives up.
The driver which instantiated the I2C device is responsible for destroying
it on cleanup. This is done by calling i2c_unregister_device() on the
-pointer that was earlier returned by i2c_new_device() or
+pointer that was earlier returned by i2c_new_client_device() or
i2c_new_scanned_device().
@@ -188,7 +199,7 @@ destroyed automatically when the driver which detected them is removed,
or when the underlying I2C bus is itself destroyed, whichever happens
first.
-Those of you familiar with the i2c subsystem of 2.4 kernels and early 2.6
+Those of you familiar with the I2C subsystem of 2.4 kernels and early 2.6
kernels will find out that this method 3 is essentially similar to what
was done there. Two significant differences are:
@@ -214,15 +225,15 @@ In general, the kernel should know which I2C devices are connected and
what addresses they live at. However, in certain cases, it does not, so a
sysfs interface was added to let the user provide the information. This
interface is made of 2 attribute files which are created in every I2C bus
-directory: new_device and delete_device. Both files are write only and you
-must write the right parameters to them in order to properly instantiate,
-respectively delete, an I2C device.
+directory: ``new_device`` and ``delete_device``. Both files are write
+only and you must write the right parameters to them in order to properly
+instantiate, respectively delete, an I2C device.
-File new_device takes 2 parameters: the name of the I2C device (a string)
-and the address of the I2C device (a number, typically expressed in
-hexadecimal starting with 0x, but can also be expressed in decimal.)
+File ``new_device`` takes 2 parameters: the name of the I2C device (a
+string) and the address of the I2C device (a number, typically expressed
+in hexadecimal starting with 0x, but can also be expressed in decimal.)
-File delete_device takes a single parameter: the address of the I2C
+File ``delete_device`` takes a single parameter: the address of the I2C
device. As no two devices can live at the same address on a given I2C
segment, the address is sufficient to uniquely identify the device to be
deleted.
diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst
index a1939512ad66..38e55829dee8 100644
--- a/Documentation/i2c/old-module-parameters.rst
+++ b/Documentation/i2c/old-module-parameters.rst
@@ -1,19 +1,24 @@
-=================================================
-I2C device driver binding control from user-space
-=================================================
+================================================================
+I2C device driver binding control from user-space in old kernels
+================================================================
-Up to kernel 2.6.32, many i2c drivers used helper macros provided by
+.. NOTE::
+ Note: this section is only relevant if you are handling some old code
+ found in kernel 2.6. If you work with more recent kernels, you can
+ safely skip this section.
+
+Up to kernel 2.6.32, many I2C drivers used helper macros provided by
<linux/i2c.h> which created standard module parameters to let the user
-control how the driver would probe i2c buses and attach to devices. These
-parameters were known as "probe" (to let the driver probe for an extra
-address), "force" (to forcibly attach the driver to a given device) and
-"ignore" (to prevent a driver from probing a given address).
+control how the driver would probe I2C buses and attach to devices. These
+parameters were known as ``probe`` (to let the driver probe for an extra
+address), ``force`` (to forcibly attach the driver to a given device) and
+``ignore`` (to prevent a driver from probing a given address).
-With the conversion of the i2c subsystem to the standard device driver
+With the conversion of the I2C subsystem to the standard device driver
binding model, it became clear that these per-module parameters were no
longer needed, and that a centralized implementation was possible. The new,
-sysfs-based interface is described in the documentation file
-"instantiating-devices", section "Method 4: Instantiate from user-space".
+sysfs-based interface is described in :doc:`instantiating-devices`, section
+"Method 4: Instantiate from user-space".
Below is a mapping from the old module parameters to the new interface.
@@ -42,8 +47,8 @@ New method (sysfs interface)::
# echo dummy 0x2f > /sys/bus/i2c/devices/i2c-1/new_device
# modprobe <driver>
-Of course, it is important to instantiate the "dummy" device before loading
+Of course, it is important to instantiate the ``dummy`` device before loading
the driver. The dummy device will be handled by i2c-core itself, preventing
other drivers from binding to it later on. If there is a real device at the
problematic address, and you want another driver to bind to it, then simply
-pass the name of the device in question instead of "dummy".
+pass the name of the device in question instead of ``dummy``.
diff --git a/Documentation/i2c/slave-interface.rst b/Documentation/i2c/slave-interface.rst
index c769bd6a15bf..82ea3e1d6fe4 100644
--- a/Documentation/i2c/slave-interface.rst
+++ b/Documentation/i2c/slave-interface.rst
@@ -59,7 +59,7 @@ The bus driver sends an event to the backend using the following function::
ret = i2c_slave_event(client, event, &val)
-'client' describes the i2c slave device. 'event' is one of the special event
+'client' describes the I2C slave device. 'event' is one of the special event
types described hereafter. 'val' holds an u8 value for the data byte to be
read/written and is thus bidirectional. The pointer to val must always be
provided even if val is not used for an event, i.e. don't use NULL here. 'ret'
@@ -143,7 +143,7 @@ Bus driver support
If you want to add slave support to the bus driver:
* implement calls to register/unregister the slave and add those to the
- struct i2c_algorithm. When registering, you probably need to set the i2c
+ struct i2c_algorithm. When registering, you probably need to set the I2C
slave address and enable slave specific interrupts. If you use runtime pm, you
should use pm_runtime_get_sync() because your device usually needs to be
powered on always to be able to detect its slave address. When unregistering,
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index e30eb1d274c6..c122ed239f7f 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -1,6 +1,6 @@
-======================
-SMBus Protocol Summary
-======================
+==================
+The SMBus Protocol
+==================
The following is a summary of the SMBus protocol. It applies to
all revisions of the protocol (1.0, 1.1, and 2.0).
@@ -27,27 +27,27 @@ a different protocol operation entirely.
Each transaction type corresponds to a functionality flag. Before calling a
transaction function, a device driver should always check (just once) for
the corresponding functionality flag to ensure that the underlying I2C
-adapter supports the transaction in question. See
-<file:Documentation/i2c/functionality.rst> for the details.
+adapter supports the transaction in question. See :doc:`functionality` for
+the details.
Key to symbols
==============
=============== =============================================================
-S (1 bit) : Start bit
-P (1 bit) : Stop bit
-Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
-A, NA (1 bit) : Accept and reverse accept bit.
-Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
+S Start condition
+P Stop condition
+Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0.
+A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit
+Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to
get a 10 bit I2C address.
-Comm (8 bits): Command byte, a data byte which often selects a register on
+Comm (8 bits) Command byte, a data byte which often selects a register on
the device.
-Data (8 bits): A plain data byte. Sometimes, I write DataLow, DataHigh
+Data (8 bits) A plain data byte. Sometimes, I write DataLow, DataHigh
for 16 bit data.
-Count (8 bits): A data byte containing the length of a block operation.
+Count (8 bits) A data byte containing the length of a block operation.
-[..]: Data sent by I2C device, as opposed to data sent by the host
+[..] Data sent by I2C device, as opposed to data sent by the host
adapter.
=============== =============================================================
@@ -62,8 +62,10 @@ This sends a single bit to the device, at the place of the Rd/Wr bit::
Functionality flag: I2C_FUNC_SMBUS_QUICK
-SMBus Receive Byte: i2c_smbus_read_byte()
-==========================================
+SMBus Receive Byte
+==================
+
+Implemented by i2c_smbus_read_byte()
This reads a single byte from a device, without specifying a device
register. Some devices are so simple that this interface is enough; for
@@ -75,8 +77,10 @@ the previous SMBus command::
Functionality flag: I2C_FUNC_SMBUS_READ_BYTE
-SMBus Send Byte: i2c_smbus_write_byte()
-========================================
+SMBus Send Byte
+===============
+
+Implemented by i2c_smbus_write_byte()
This operation is the reverse of Receive Byte: it sends a single byte
to a device. See Receive Byte for more information.
@@ -88,8 +92,10 @@ to a device. See Receive Byte for more information.
Functionality flag: I2C_FUNC_SMBUS_WRITE_BYTE
-SMBus Read Byte: i2c_smbus_read_byte_data()
-============================================
+SMBus Read Byte
+===============
+
+Implemented by i2c_smbus_read_byte_data()
This reads a single byte from a device, from a designated register.
The register is specified through the Comm byte::
@@ -99,8 +105,10 @@ The register is specified through the Comm byte::
Functionality flag: I2C_FUNC_SMBUS_READ_BYTE_DATA
-SMBus Read Word: i2c_smbus_read_word_data()
-============================================
+SMBus Read Word
+===============
+
+Implemented by i2c_smbus_read_word_data()
This operation is very like Read Byte; again, data is read from a
device, from a designated register that is specified through the Comm
@@ -110,13 +118,15 @@ byte. But this time, the data is a complete word (16 bits)::
Functionality flag: I2C_FUNC_SMBUS_READ_WORD_DATA
-Note the convenience function i2c_smbus_read_word_swapped is
+Note the convenience function i2c_smbus_read_word_swapped() is
available for reads where the two data bytes are the other way
around (not SMBus compliant, but very popular.)
-SMBus Write Byte: i2c_smbus_write_byte_data()
-==============================================
+SMBus Write Byte
+================
+
+Implemented by i2c_smbus_write_byte_data()
This writes a single byte to a device, to a designated register. The
register is specified through the Comm byte. This is the opposite of
@@ -129,24 +139,26 @@ the Read Byte operation.
Functionality flag: I2C_FUNC_SMBUS_WRITE_BYTE_DATA
-SMBus Write Word: i2c_smbus_write_word_data()
-==============================================
+SMBus Write Word
+================
+
+Implemented by i2c_smbus_write_word_data()
This is the opposite of the Read Word operation. 16 bits
-of data is written to a device, to the designated register that is
-specified through the Comm byte.::
+of data are written to a device, to the designated register that is
+specified through the Comm byte::
S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A] P
Functionality flag: I2C_FUNC_SMBUS_WRITE_WORD_DATA
-Note the convenience function i2c_smbus_write_word_swapped is
+Note the convenience function i2c_smbus_write_word_swapped() is
available for writes where the two data bytes are the other way
around (not SMBus compliant, but very popular.)
-SMBus Process Call:
-===================
+SMBus Process Call
+==================
This command selects a device register (through the Comm byte), sends
16 bits of data to it, and reads 16 bits of data in return::
@@ -157,8 +169,10 @@ This command selects a device register (through the Comm byte), sends
Functionality flag: I2C_FUNC_SMBUS_PROC_CALL
-SMBus Block Read: i2c_smbus_read_block_data()
-==============================================
+SMBus Block Read
+================
+
+Implemented by i2c_smbus_read_block_data()
This command reads a block of up to 32 bytes from a device, from a
designated register that is specified through the Comm byte. The amount
@@ -172,8 +186,10 @@ of data is specified by the device in the Count byte.
Functionality flag: I2C_FUNC_SMBUS_READ_BLOCK_DATA
-SMBus Block Write: i2c_smbus_write_block_data()
-================================================
+SMBus Block Write
+=================
+
+Implemented by i2c_smbus_write_block_data()
The opposite of the Block Read command, this writes up to 32 bytes to
a device, to a designated register that is specified through the
@@ -266,16 +282,19 @@ This is implemented the following way in the Linux kernel:
I2C Block Transactions
======================
-The following I2C block transactions are supported by the
-SMBus layer and are described here for completeness.
-They are *NOT* defined by the SMBus specification.
+The following I2C block transactions are similar to the SMBus Block Read
+and Write operations, except these do not have a Count byte. They are
+supported by the SMBus layer and are described here for completeness, but
+they are *NOT* defined by the SMBus specification.
I2C block transactions do not limit the number of bytes transferred
but the SMBus layer places a limit of 32 bytes.
-I2C Block Read: i2c_smbus_read_i2c_block_data()
-================================================
+I2C Block Read
+==============
+
+Implemented by i2c_smbus_read_i2c_block_data()
This command reads a block of bytes from a device, from a
designated register that is specified through the Comm byte::
@@ -286,8 +305,10 @@ designated register that is specified through the Comm byte::
Functionality flag: I2C_FUNC_SMBUS_READ_I2C_BLOCK
-I2C Block Write: i2c_smbus_write_i2c_block_data()
-==================================================
+I2C Block Write
+===============
+
+Implemented by i2c_smbus_write_i2c_block_data()
The opposite of the Block Read command, this writes bytes to
a device, to a designated register that is specified through the
diff --git a/Documentation/i2c/summary.rst b/Documentation/i2c/summary.rst
index 3a24eac17375..ce7230025b33 100644
--- a/Documentation/i2c/summary.rst
+++ b/Documentation/i2c/summary.rst
@@ -1,13 +1,19 @@
-=============
-I2C and SMBus
-=============
-
-I2C (pronounce: I squared C) is a protocol developed by Philips. It is a
-slow two-wire protocol (variable speed, up to 400 kHz), with a high speed
-extension (3.4 MHz). It provides an inexpensive bus for connecting many
-types of devices with infrequent or low bandwidth communications needs.
-I2C is widely used with embedded systems. Some systems use variants that
-don't meet branding requirements, and so are not advertised as being I2C.
+=============================
+Introduction to I2C and SMBus
+=============================
+
+I²C (pronounce: I squared C and written I2C in the kernel documentation) is
+a protocol developed by Philips. It is a slow two-wire protocol (variable
+speed, up to 400 kHz), with a high speed extension (3.4 MHz). It provides
+an inexpensive bus for connecting many types of devices with infrequent or
+low bandwidth communications needs. I2C is widely used with embedded
+systems. Some systems use variants that don't meet branding requirements,
+and so are not advertised as being I2C but come under different names,
+e.g. TWI (Two Wire Interface), IIC.
+
+The official I2C specification is the `"I2C-bus specification and user
+manual" (UM10204) <https://www.nxp.com/docs/en/user-guide/UM10204.pdf>`_
+published by NXP Semiconductors.
SMBus (System Management Bus) is based on the I2C protocol, and is mostly
a subset of I2C protocols and signaling. Many I2C devices will work on an
@@ -25,21 +31,29 @@ implement all the common SMBus protocol semantics or messages.
Terminology
===========
-When we talk about I2C, we use the following terms::
+Using the terminology from the official documentation, the I2C bus connects
+one or more *master* chips and one or more *slave* chips.
+
+.. kernel-figure:: i2c.svg
+ :alt: Simple I2C bus with one master and 3 slaves
+
+ Simple I2C bus
- Bus -> Algorithm
- Adapter
- Device -> Driver
- Client
+A **master** chip is a node that starts communications with slaves. In the
+Linux kernel implementation it is called an **adapter** or bus. Adapter
+drivers are in the ``drivers/i2c/busses/`` subdirectory.
-An Algorithm driver contains general code that can be used for a whole class
-of I2C adapters. Each specific adapter driver either depends on one algorithm
-driver, or includes its own implementation.
+An **algorithm** contains general code that can be used to implement a
+whole class of I2C adapters. Each specific adapter driver either depends on
+an algorithm driver in the ``drivers/i2c/algos/`` subdirectory, or includes
+its own implementation.
-A Driver driver (yes, this sounds ridiculous, sorry) contains the general
-code to access some type of device. Each detected device gets its own
-data in the Client structure. Usually, Driver and Client are more closely
-integrated than Algorithm and Adapter.
+A **slave** chip is a node that responds to communications when addressed
+by the master. In Linux it is called a **client**. Client drivers are kept
+in a directory specific to the feature they provide, for example
+``drivers/media/gpio/`` for GPIO expanders and ``drivers/media/i2c/`` for
+video-related chips.
-For a given configuration, you will need a driver for your I2C bus, and
-drivers for your I2C devices (usually one driver for each device).
+For the example configuration in figure, you will need a driver for your
+I2C adapter, and drivers for your I2C devices (usually one driver for each
+device).
diff --git a/Documentation/i2c/writing-clients.rst b/Documentation/i2c/writing-clients.rst
index ced309b5e0cc..978cc8210bf3 100644
--- a/Documentation/i2c/writing-clients.rst
+++ b/Documentation/i2c/writing-clients.rst
@@ -1,6 +1,6 @@
-===================
-Writing I2C Clients
-===================
+===============================
+Implementing I2C device drivers
+===============================
This is a small guide for those who want to write kernel drivers for I2C
or SMBus devices, using Linux as the protocol host/master (not slave).
@@ -95,7 +95,7 @@ to gather information from the client, or write new information to the
client.
I have found it useful to define foo_read and foo_write functions for this.
-For some cases, it will be easier to call the i2c functions directly,
+For some cases, it will be easier to call the I2C functions directly,
but many chips have some kind of register-value idea that can easily
be encapsulated.
@@ -175,8 +175,8 @@ Device Creation
If you know for a fact that an I2C device is connected to a given I2C bus,
you can instantiate that device by simply filling an i2c_board_info
structure with the device address and driver name, and calling
-i2c_new_device(). This will create the device, then the driver core will
-take care of finding the right driver and will call its probe() method.
+i2c_new_client_device(). This will create the device, then the driver core
+will take care of finding the right driver and will call its probe() method.
If a driver supports different device types, you can specify the type you
want using the type field. You can also specify an IRQ and platform data
if needed.
@@ -186,14 +186,14 @@ don't know the exact address it uses. This happens on TV adapters for
example, where the same driver supports dozens of slightly different
models, and I2C device addresses change from one model to the next. In
that case, you can use the i2c_new_scanned_device() variant, which is
-similar to i2c_new_device(), except that it takes an additional list of
-possible I2C addresses to probe. A device is created for the first
+similar to i2c_new_client_device(), except that it takes an additional list
+of possible I2C addresses to probe. A device is created for the first
responsive address in the list. If you expect more than one device to be
present in the address range, simply call i2c_new_scanned_device() that
many times.
-The call to i2c_new_device() or i2c_new_scanned_device() typically happens
-in the I2C bus driver. You may want to save the returned i2c_client
+The call to i2c_new_client_device() or i2c_new_scanned_device() typically
+happens in the I2C bus driver. You may want to save the returned i2c_client
reference for later use.
@@ -236,11 +236,11 @@ possible.
Device Deletion
---------------
-Each I2C device which has been created using i2c_new_device() or
-i2c_new_scanned_device() can be unregistered by calling
+Each I2C device which has been created using i2c_new_client_device()
+or i2c_new_scanned_device() can be unregistered by calling
i2c_unregister_device(). If you don't call it explicitly, it will be
-called automatically before the underlying I2C bus itself is removed, as a
-device can't survive its parent in the device driver model.
+called automatically before the underlying I2C bus itself is removed,
+as a device can't survive its parent in the device driver model.
Initializing the driver
@@ -344,7 +344,7 @@ Plain I2C communication
int i2c_master_recv(struct i2c_client *client, char *buf, int count);
These routines read and write some bytes from/to a client. The client
-contains the i2c address, so you do not have to include it. The second
+contains the I2C address, so you do not have to include it. The second
parameter contains the bytes to read/write, the third the number of bytes
to read/write (must be less than the length of the buffer, also should be
less than 64k since msg.len is u16.) Returned is the actual number of bytes
@@ -357,9 +357,9 @@ read/written.
This sends a series of messages. Each message can be a read or write,
and they can be mixed in any way. The transactions are combined: no
-stop bit is sent between transaction. The i2c_msg structure contains
-for each message the client address, the number of bytes of the message
-and the message data itself.
+stop condition is issued between transaction. The i2c_msg structure
+contains for each message the client address, the number of bytes of the
+message and the message data itself.
You can read the file ``i2c-protocol`` for more information about the
actual I2C protocol.
diff --git a/MAINTAINERS b/MAINTAINERS
index f1d8800f4994..bf05f37f6b19 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7814,9 +7814,7 @@ M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-parport.rst
-F: Documentation/i2c/busses/i2c-parport-light.rst
F: drivers/i2c/busses/i2c-parport.c
-F: drivers/i2c/busses/i2c-parport-light.c
I2C SUBSYSTEM
M: Wolfram Sang <wsa@the-dreams.de>
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6a0aa76859f3..2ddca08f8a76 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -367,7 +367,8 @@ comment "I2C system bus drivers (mostly embedded / system-on-chip)"
config I2C_ALTERA
tristate "Altera Soft IP I2C"
- depends on (ARCH_SOCFPGA || NIOS2) && OF
+ depends on ARCH_SOCFPGA || NIOS2 || COMPILE_TEST
+ depends on OF
help
If you say yes to this option, support will be included for the
Altera Soft IP I2C interfaces on SoCFPGA and Nios2 architectures.
@@ -387,7 +388,7 @@ config I2C_ASPEED
config I2C_AT91
tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
- depends on ARCH_AT91
+ depends on ARCH_AT91 || COMPILE_TEST
help
This supports the use of the I2C interface on Atmel AT91
processors.
@@ -440,7 +441,8 @@ config I2C_AXXIA
config I2C_BCM2835
tristate "Broadcom BCM2835 I2C controller"
- depends on ARCH_BCM2835 || ARCH_BRCMSTB
+ depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
+ depends on COMMON_CLK
help
If you say yes to this option, support will be included for the
BCM2835 I2C controller.
@@ -463,8 +465,8 @@ config I2C_BCM_IPROC
config I2C_BCM_KONA
tristate "BCM Kona I2C adapter"
- depends on ARCH_BCM_MOBILE
- default y
+ depends on ARCH_BCM_MOBILE || COMPILE_TEST
+ default y if ARCH_BCM_MOBILE
help
If you say yes to this option, support will be included for the
I2C interface on the Broadcom Kona family of processors.
@@ -511,7 +513,7 @@ config I2C_CPM
config I2C_DAVINCI
tristate "DaVinci I2C driver"
- depends on ARCH_DAVINCI || ARCH_KEYSTONE
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST
help
Support for TI DaVinci I2C controller driver.
@@ -572,7 +574,7 @@ config I2C_DESIGNWARE_BAYTRAIL
config I2C_DIGICOLOR
tristate "Conexant Digicolor I2C driver"
- depends on ARCH_DIGICOLOR
+ depends on ARCH_DIGICOLOR || COMPILE_TEST
help
Support for Conexant Digicolor SoCs (CX92755) I2C controller driver.
@@ -610,11 +612,12 @@ config I2C_EMEV2
I2C interface on the Renesas Electronics EM/EV family of processors.
config I2C_EXYNOS5
- tristate "Exynos5 high-speed I2C driver"
- depends on ARCH_EXYNOS && OF
- default y
+ tristate "Exynos high-speed I2C driver"
+ depends on OF
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default y if ARCH_EXYNOS
help
- High-speed I2C controller on Exynos5 based Samsung SoCs.
+ High-speed I2C controller on Exynos5 and newer Samsung SoCs.
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
@@ -634,7 +637,7 @@ config I2C_GPIO_FAULT_INJECTOR
config I2C_HIGHLANDER
tristate "Highlander FPGA SMBus interface"
- depends on SH_HIGHLANDER
+ depends on SH_HIGHLANDER || COMPILE_TEST
help
If you say yes to this option, support will be included for
the SMBus interface located in the FPGA on various Highlander
@@ -686,7 +689,7 @@ config I2C_IMX_LPI2C
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
- depends on ARCH_IOP32X || ARCH_IXP4XX
+ depends on ARCH_IOP32X || ARCH_IXP4XX || COMPILE_TEST
help
Say Y here if you want to use the IIC bus controller on
the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
@@ -726,6 +729,7 @@ config I2C_LPC2K
config I2C_MESON
tristate "Amlogic Meson I2C controller"
depends on ARCH_MESON || COMPILE_TEST
+ depends on COMMON_CLK
help
If you say yes to this option, support will be included for the
I2C interface on the Amlogic Meson family of SoCs.
@@ -759,7 +763,7 @@ config I2C_MT7621
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU
+ depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU || COMPILE_TEST
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
@@ -770,7 +774,7 @@ config I2C_MV64XXX
config I2C_MXS
tristate "Freescale i.MX28 I2C interface"
- depends on SOC_IMX28
+ depends on SOC_IMX28 || COMPILE_TEST
select STMP_DEVICE
help
Say Y here if you want to use the I2C bus controller on
@@ -799,7 +803,7 @@ config I2C_OCORES
config I2C_OMAP
tristate "OMAP I2C adapter"
- depends on ARCH_OMAP || ARCH_K3
+ depends on ARCH_OMAP || ARCH_K3 || COMPILE_TEST
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes to this option, support will be included for the
@@ -833,7 +837,7 @@ config I2C_PCA_PLATFORM
config I2C_PMCMSP
tristate "PMC MSP I2C TWI Controller"
- depends on PMC_MSP
+ depends on PMC_MSP || COMPILE_TEST
help
This driver supports the PMC TWI controller on MSP devices.
@@ -842,7 +846,7 @@ config I2C_PMCMSP
config I2C_PNX
tristate "I2C bus support for Philips PNX and NXP LPC targets"
- depends on ARCH_LPC32XX
+ depends on ARCH_LPC32XX || COMPILE_TEST
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
@@ -863,7 +867,7 @@ config I2C_PUV3
config I2C_PXA
tristate "Intel PXA2XX I2C adapter"
- depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF)
+ depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF) || COMPILE_TEST
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
@@ -932,11 +936,11 @@ config HAVE_S3C2410_I2C
respective Kconfig file.
config I2C_S3C2410
- tristate "S3C2410 I2C Driver"
- depends on HAVE_S3C2410_I2C
+ tristate "S3C/Exynos I2C Driver"
+ depends on HAVE_S3C2410_I2C || COMPILE_TEST
help
Say Y here to include support for I2C controller in the
- Samsung SoCs.
+ Samsung SoCs (S3C, S5Pv210, Exynos).
config I2C_SH7760
tristate "Renesas SH7760 I2C Controller"
@@ -971,7 +975,7 @@ config I2C_SIMTEC
config I2C_SIRF
tristate "CSR SiRFprimaII I2C interface"
- depends on ARCH_SIRF
+ depends on ARCH_SIRF || COMPILE_TEST
help
If you say yes to this option, support will be included for the
CSR SiRFprimaII I2C interface.
@@ -981,14 +985,14 @@ config I2C_SIRF
config I2C_SPRD
tristate "Spreadtrum I2C interface"
- depends on I2C=y && ARCH_SPRD
+ depends on I2C=y && (ARCH_SPRD || COMPILE_TEST)
help
If you say yes to this option, support will be included for the
Spreadtrum I2C interface.
config I2C_ST
tristate "STMicroelectronics SSC I2C support"
- depends on ARCH_STI
+ depends on ARCH_STI || COMPILE_TEST
help
Enable this option to add support for STMicroelectronics SoCs
hardware SSC (Synchronous Serial Controller) as an I2C controller.
@@ -1019,7 +1023,7 @@ config I2C_STM32F7
config I2C_STU300
tristate "ST Microelectronics DDC I2C interface"
- depends on MACH_U300
+ depends on MACH_U300 || COMPILE_TEST
default y if MACH_U300
help
If you say yes to this option, support will be included for the
@@ -1055,15 +1059,16 @@ config I2C_SYNQUACER
config I2C_TEGRA
tristate "NVIDIA Tegra internal I2C controller"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SUPERH || SPARC))
+ # COMPILE_TEST needs architectures with readsX()/writesX() primitives
help
If you say yes to this option, support will be included for the
I2C controller embedded in NVIDIA Tegra SOCs
config I2C_TEGRA_BPMP
tristate "NVIDIA Tegra BPMP I2C controller"
- depends on TEGRA_BPMP
- default y
+ depends on TEGRA_BPMP || COMPILE_TEST
+ default y if TEGRA_BPMP
help
If you say yes to this option, support will be included for the I2C
controller embedded in NVIDIA Tegra SoCs accessed via the BPMP.
@@ -1101,7 +1106,7 @@ config I2C_VERSATILE
config I2C_WMT
tristate "Wondermedia WM8xxx SoC I2C bus support"
- depends on ARCH_VT8500
+ depends on ARCH_VT8500 || COMPILE_TEST
help
Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
SoCs.
@@ -1142,7 +1147,7 @@ config I2C_XILINX
config I2C_XLR
tristate "Netlogic XLR and Sigma Designs I2C support"
- depends on CPU_XLR || ARCH_TANGO
+ depends on CPU_XLR || ARCH_TANGO || COMPILE_TEST
help
This driver enables support for the on-chip I2C interface of
the Netlogic XLR/XLS MIPS processors and Sigma Designs SOCs.
@@ -1202,46 +1207,12 @@ config I2C_PARPORT
This supports parallel port I2C adapters such as the ones made by
Philips or Velleman, Analog Devices evaluation boards, and more.
Basically any adapter using the parallel port as an I2C bus with
- no extra chipset is supported by this driver, or could be.
-
- This driver is a replacement for (and was inspired by) an older
- driver named i2c-philips-par. The new driver supports more devices,
- and makes it easier to add support for new devices.
-
- An adapter type parameter is now mandatory. Please read the file
- Documentation/i2c/busses/i2c-parport.rst for details.
-
- Another driver exists, named i2c-parport-light, which doesn't depend
- on the parport driver. This is meant for embedded systems. Don't say
- Y here if you intend to say Y or M there.
+ no extra chipset is supported by this driver, or could be. Please
+ read the file Documentation/i2c/busses/i2c-parport.rst for details.
This support is also available as a module. If so, the module
will be called i2c-parport.
-config I2C_PARPORT_LIGHT
- tristate "Parallel port adapter (light)"
- select I2C_ALGOBIT
- select I2C_SMBUS
- help
- This supports parallel port I2C adapters such as the ones made by
- Philips or Velleman, Analog Devices evaluation boards, and more.
- Basically any adapter using the parallel port as an I2C bus with
- no extra chipset is supported by this driver, or could be.
-
- This driver is a light version of i2c-parport. It doesn't depend
- on the parport driver, and uses direct I/O access instead. This
- might be preferred on embedded systems where wasting memory for
- the clean but heavy parport handling is not an option. The
- drawback is a reduced portability and the impossibility to
- daisy-chain other parallel port devices.
-
- Don't say Y here if you said Y or M to i2c-parport. Saying M to
- both is possible but both modules should not be loaded at the same
- time.
-
- This support is also available as a module. If so, the module
- will be called i2c-parport-light.
-
config I2C_ROBOTFUZZ_OSIF
tristate "RobotFuzz Open Source InterFace USB adapter"
depends on USB
@@ -1328,7 +1299,7 @@ config I2C_ICY
config I2C_MLXCPLD
tristate "Mellanox I2C driver"
- depends on X86_64
+ depends on X86_64 || COMPILE_TEST
help
This exposes the Mellanox platform I2C busses to the linux I2C layer
for X86 based systems.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 3ab8aebc39c9..25d60889713c 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -128,7 +128,6 @@ obj-$(CONFIG_I2C_ZX2967) += i2c-zx2967.o
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
-obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
index 5137e6297022..3da1a8acecb5 100644
--- a/drivers/i2c/busses/i2c-at91-core.c
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -66,55 +66,26 @@ static struct at91_twi_pdata at91rm9200_config = {
.clk_max_div = 5,
.clk_offset = 3,
.has_unre_flag = true,
- .has_alt_cmd = false,
- .has_hold_field = false,
- .has_dig_filtr = false,
- .has_adv_dig_filtr = false,
- .has_ana_filtr = false,
};
static struct at91_twi_pdata at91sam9261_config = {
.clk_max_div = 5,
.clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
- .has_dig_filtr = false,
- .has_adv_dig_filtr = false,
- .has_ana_filtr = false,
};
static struct at91_twi_pdata at91sam9260_config = {
.clk_max_div = 7,
.clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
- .has_dig_filtr = false,
- .has_adv_dig_filtr = false,
- .has_ana_filtr = false,
};
static struct at91_twi_pdata at91sam9g20_config = {
.clk_max_div = 7,
.clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
- .has_dig_filtr = false,
- .has_adv_dig_filtr = false,
- .has_ana_filtr = false,
};
static struct at91_twi_pdata at91sam9g10_config = {
.clk_max_div = 7,
.clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
- .has_dig_filtr = false,
- .has_adv_dig_filtr = false,
- .has_ana_filtr = false,
};
static const struct platform_device_id at91_twi_devtypes[] = {
@@ -142,23 +113,13 @@ static const struct platform_device_id at91_twi_devtypes[] = {
static struct at91_twi_pdata at91sam9x5_config = {
.clk_max_div = 7,
.clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
- .has_dig_filtr = false,
- .has_adv_dig_filtr = false,
- .has_ana_filtr = false,
};
static struct at91_twi_pdata sama5d4_config = {
.clk_max_div = 7,
.clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
.has_hold_field = true,
.has_dig_filtr = true,
- .has_adv_dig_filtr = false,
- .has_ana_filtr = false,
};
static struct at91_twi_pdata sama5d2_config = {
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 9d71ce15db05..1105aee6634a 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -208,6 +208,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+ id->err_status = 0;
/* Handling nack and arbitration lost interrupt */
if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_ARB_LOST)) {
@@ -241,10 +242,17 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
!id->bus_hold_flag)
cdns_i2c_clear_bus_hold(id);
- *(id->p_recv_buf)++ =
- cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
- id->recv_count--;
- id->curr_recv_count--;
+ if (id->recv_count > 0) {
+ *(id->p_recv_buf)++ =
+ cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+ id->recv_count--;
+ id->curr_recv_count--;
+ } else {
+ dev_err(id->adap.dev.parent,
+ "xfer_size reg rollover. xfer aborted!\n");
+ id->err_status |= CDNS_I2C_IXR_TO;
+ break;
+ }
if (cdns_is_holdquirk(id, hold_quirk))
break;
@@ -342,7 +350,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
}
/* Update the status for errors */
- id->err_status = isr_status & CDNS_I2C_IXR_ERR_INTR_MASK;
+ id->err_status |= isr_status & CDNS_I2C_IXR_ERR_INTR_MASK;
if (id->err_status)
status = IRQ_HANDLED;
@@ -500,7 +508,7 @@ static void cdns_i2c_master_reset(struct i2c_adapter *adap)
cdns_i2c_writereg(regval, CDNS_I2C_CR_OFFSET);
/* Update the transfercount register to zero */
cdns_i2c_writereg(0, CDNS_I2C_XFER_SIZE_OFFSET);
- /* Clear the interupt status register */
+ /* Clear the interrupt status register */
regval = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
cdns_i2c_writereg(regval, CDNS_I2C_ISR_OFFSET);
/* Clear the status register */
@@ -921,17 +929,18 @@ static int cdns_i2c_probe(struct platform_device *pdev)
id->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(id->clk)) {
- dev_err(&pdev->dev, "input clock not found.\n");
+ if (PTR_ERR(id->clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "input clock not found.\n");
return PTR_ERR(id->clk);
}
ret = clk_prepare_enable(id->clk);
if (ret)
dev_err(&pdev->dev, "Unable to enable clock.\n");
- pm_runtime_enable(id->dev);
pm_runtime_set_autosuspend_delay(id->dev, CNDS_I2C_PM_TIMEOUT);
pm_runtime_use_autosuspend(id->dev);
pm_runtime_set_active(id->dev);
+ pm_runtime_enable(id->dev);
id->clk_rate_change_nb.notifier_call = cdns_i2c_clk_notifier_cb;
if (clk_notifier_register(id->clk, &id->clk_rate_change_nb))
@@ -980,8 +989,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
err_clk_dis:
clk_disable_unprepare(id->clk);
- pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
return ret;
}
@@ -997,10 +1006,13 @@ static int cdns_i2c_remove(struct platform_device *pdev)
{
struct cdns_i2c *id = platform_get_drvdata(pdev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+
i2c_del_adapter(&id->adap);
clk_notifier_unregister(id->clk, &id->clk_rate_change_nb);
clk_disable_unprepare(id->clk);
- pm_runtime_disable(&pdev->dev);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index b8fde61bb5d8..35e55feda763 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -388,9 +388,9 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
*/
if (acpi_dev_present("INT33FE", NULL, -1)) {
board_info.irq = adap->client_irq;
- adap->client = i2c_new_device(&adap->adapter, &board_info);
- if (!adap->client) {
- ret = -ENOMEM;
+ adap->client = i2c_new_client_device(&adap->adapter, &board_info);
+ if (IS_ERR(adap->client)) {
+ ret = PTR_ERR(adap->client);
goto del_adapter;
}
}
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index 958161c71985..790ea3fda693 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -273,6 +273,7 @@ static int ec_i2c_probe(struct platform_device *pdev)
bus->adap.dev.parent = &pdev->dev;
bus->adap.dev.of_node = pdev->dev.of_node;
bus->adap.retries = I2C_MAX_RETRIES;
+ ACPI_COMPANION_SET(&bus->adap.dev, ACPI_COMPANION(&pdev->dev));
err = i2c_add_adapter(&bus->adap);
if (err)
@@ -298,7 +299,7 @@ static const struct of_device_id cros_ec_i2c_of_match[] = {
MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match);
static const struct acpi_device_id cros_ec_i2c_tunnel_acpi_id[] = {
- { "GOOG001A", 0 },
+ { "GOOG0012", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, cros_ec_i2c_tunnel_acpi_id);
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index abfe3094c047..803dad70e2a7 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -322,7 +322,7 @@ static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
tmp |= (SMMR_MODE0 | SMMR_MODE1);
break;
default:
- dev_err(dev->dev, "unsupported xfer size %d\n", dev->buf_len);
+ dev_err(dev->dev, "unsupported xfer size %zu\n", dev->buf_len);
return -EINVAL;
}
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index f5e69fe56532..ca4f096fef74 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -68,6 +68,7 @@
* Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes
* Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes
* Jasper Lake (SOC) 0x4da3 32 hard yes yes yes
+ * Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -244,6 +245,7 @@
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3
#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS 0xa3a3
struct i801_mux_config {
char *gpio_chip;
@@ -1074,6 +1076,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
@@ -1142,7 +1145,7 @@ static void dmi_check_onboard_device(u8 type, const char *name,
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = dmi_devices[i].i2c_addr;
strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
- i2c_new_device(adap, &info);
+ i2c_new_client_device(adap, &info);
break;
}
}
@@ -1296,7 +1299,7 @@ static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = dell_lis3lv02d_devices[i].i2c_addr;
strlcpy(info.type, "lis3lv02d", I2C_NAME_SIZE);
- i2c_new_device(&priv->adapter, &info);
+ i2c_new_client_device(&priv->adapter, &info);
}
/* Register optional slaves */
@@ -1312,7 +1315,7 @@ static void i801_probe_optional_slaves(struct i801_priv *priv)
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = apanel_addr;
strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
- i2c_new_device(&priv->adapter, &info);
+ i2c_new_client_device(&priv->adapter, &info);
}
if (dmi_name_in_vendors("FUJITSU"))
@@ -1742,6 +1745,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
+ case PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS:
priv->features |= FEATURE_BLOCK_PROC;
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index 25dcd73acd63..16a67a64284a 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -4,6 +4,7 @@
*
* Copyright (C) 2006 - 2009 Ingenic Semiconductor Inc.
* Copyright (C) 2015 Imagination Technologies
+ * Copyright (C) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
*/
#include <linux/bitops.h>
@@ -17,6 +18,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -55,6 +57,7 @@
#define JZ4780_I2C_ACKGC 0x98
#define JZ4780_I2C_ENSTA 0x9C
#define JZ4780_I2C_SDAHD 0xD0
+#define X1000_I2C_SDAHD 0x7C
#define JZ4780_I2C_CTRL_STPHLD BIT(7)
#define JZ4780_I2C_CTRL_SLVDIS BIT(6)
@@ -73,6 +76,8 @@
#define JZ4780_I2C_STA_TFNF BIT(1)
#define JZ4780_I2C_STA_ACT BIT(0)
+#define X1000_I2C_DC_STOP BIT(9)
+
static const char * const jz4780_i2c_abrt_src[] = {
"ABRT_7B_ADDR_NOACK",
"ABRT_10ADDR1_NOACK",
@@ -130,18 +135,33 @@ static const char * const jz4780_i2c_abrt_src[] = {
#define JZ4780_I2CFLCNT_ADJUST(n) (((n) - 1) < 8 ? 8 : ((n) - 1))
#define JZ4780_I2C_FIFO_LEN 16
-#define TX_LEVEL 3
-#define RX_LEVEL (JZ4780_I2C_FIFO_LEN - TX_LEVEL - 1)
+
+#define X1000_I2C_FIFO_LEN 64
#define JZ4780_I2C_TIMEOUT 300
#define BUFSIZE 200
+enum ingenic_i2c_version {
+ ID_JZ4780,
+ ID_X1000,
+};
+
+/* ingenic_i2c_config: SoC specific config data. */
+struct ingenic_i2c_config {
+ enum ingenic_i2c_version version;
+
+ int fifosize;
+ int tx_level;
+ int rx_level;
+};
+
struct jz4780_i2c {
void __iomem *iomem;
int irq;
struct clk *clk;
struct i2c_adapter adap;
+ const struct ingenic_i2c_config *cdata;
/* lock to protect rbuf and wbuf between xfer_rd/wr and irq handler */
spinlock_t lock;
@@ -340,11 +360,18 @@ static int jz4780_i2c_set_speed(struct jz4780_i2c *i2c)
if (hold_time >= 0) {
/*i2c hold time enable */
- hold_time |= JZ4780_I2C_SDAHD_HDENB;
- jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
+ if (i2c->cdata->version >= ID_X1000) {
+ jz4780_i2c_writew(i2c, X1000_I2C_SDAHD, hold_time);
+ } else {
+ hold_time |= JZ4780_I2C_SDAHD_HDENB;
+ jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
+ }
} else {
/* disable hold time */
- jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
+ if (i2c->cdata->version >= ID_X1000)
+ jz4780_i2c_writew(i2c, X1000_I2C_SDAHD, 0);
+ else
+ jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
}
return 0;
@@ -359,9 +386,11 @@ static int jz4780_i2c_cleanup(struct jz4780_i2c *i2c)
spin_lock_irqsave(&i2c->lock, flags);
/* can send stop now if need */
- tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
- tmp &= ~JZ4780_I2C_CTRL_STPHLD;
- jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+ if (i2c->cdata->version < ID_X1000) {
+ tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+ tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+ jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+ }
/* disable all interrupts first */
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
@@ -399,11 +428,19 @@ static int jz4780_i2c_prepare(struct jz4780_i2c *i2c)
return jz4780_i2c_enable(i2c);
}
-static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c, int cmd_count)
+static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c,
+ int cmd_count,
+ int cmd_left)
{
int i;
- for (i = 0; i < cmd_count; i++)
+ for (i = 0; i < cmd_count - 1; i++)
+ jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
+
+ if ((cmd_left == 0) && (i2c->cdata->version >= ID_X1000))
+ jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
+ JZ4780_I2C_DC_READ | X1000_I2C_DC_STOP);
+ else
jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
}
@@ -458,37 +495,44 @@ static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id)
rd_left = i2c->rd_total_len - i2c->rd_data_xfered;
- if (rd_left <= JZ4780_I2C_FIFO_LEN)
+ if (rd_left <= i2c->cdata->fifosize)
jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, rd_left - 1);
}
if (intst & JZ4780_I2C_INTST_TXEMP) {
if (i2c->is_write == 0) {
int cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
- int max_send = (JZ4780_I2C_FIFO_LEN - 1)
+ int max_send = (i2c->cdata->fifosize - 1)
- (i2c->rd_cmd_xfered
- i2c->rd_data_xfered);
int cmd_to_send = min(cmd_left, max_send);
if (i2c->rd_cmd_xfered != 0)
cmd_to_send = min(cmd_to_send,
- JZ4780_I2C_FIFO_LEN
- - TX_LEVEL - 1);
+ i2c->cdata->fifosize
+ - i2c->cdata->tx_level - 1);
if (cmd_to_send) {
- jz4780_i2c_send_rcmd(i2c, cmd_to_send);
i2c->rd_cmd_xfered += cmd_to_send;
+ cmd_left = i2c->rd_total_len -
+ i2c->rd_cmd_xfered;
+ jz4780_i2c_send_rcmd(i2c,
+ cmd_to_send, cmd_left);
+
}
- cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
if (cmd_left == 0) {
intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
intmsk &= ~JZ4780_I2C_INTM_MTXEMP;
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, intmsk);
- tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
- tmp &= ~JZ4780_I2C_CTRL_STPHLD;
- jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+ if (i2c->cdata->version < ID_X1000) {
+ tmp = jz4780_i2c_readw(i2c,
+ JZ4780_I2C_CTRL);
+ tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+ jz4780_i2c_writew(i2c,
+ JZ4780_I2C_CTRL, tmp);
+ }
}
} else {
unsigned short data;
@@ -497,23 +541,26 @@ static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id)
i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
while ((i2c_sta & JZ4780_I2C_STA_TFNF) &&
- (i2c->wt_len > 0)) {
+ (i2c->wt_len > 0)) {
i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
data = *i2c->wbuf;
data &= ~JZ4780_I2C_DC_READ;
- jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
- data);
+ if ((!i2c->stop_hold) && (i2c->cdata->version >=
+ ID_X1000))
+ data |= X1000_I2C_DC_STOP;
+ jz4780_i2c_writew(i2c, JZ4780_I2C_DC, data);
i2c->wbuf++;
i2c->wt_len--;
}
if (i2c->wt_len == 0) {
- if (!i2c->stop_hold) {
+ if ((!i2c->stop_hold) && (i2c->cdata->version <
+ ID_X1000)) {
tmp = jz4780_i2c_readw(i2c,
- JZ4780_I2C_CTRL);
+ JZ4780_I2C_CTRL);
tmp &= ~JZ4780_I2C_CTRL_STPHLD;
- jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL,
- tmp);
+ jz4780_i2c_writew(i2c,
+ JZ4780_I2C_CTRL, tmp);
}
jz4780_i2c_trans_done(i2c);
@@ -567,20 +614,22 @@ static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,
i2c->rd_data_xfered = 0;
i2c->rd_cmd_xfered = 0;
- if (len <= JZ4780_I2C_FIFO_LEN)
+ if (len <= i2c->cdata->fifosize)
jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, len - 1);
else
- jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, RX_LEVEL);
+ jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, i2c->cdata->rx_level);
- jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
+ jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, i2c->cdata->tx_level);
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM,
JZ4780_I2C_INTM_MRXFL | JZ4780_I2C_INTM_MTXEMP
| JZ4780_I2C_INTM_MTXABT | JZ4780_I2C_INTM_MRXOF);
- tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
- tmp |= JZ4780_I2C_CTRL_STPHLD;
- jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+ if (i2c->cdata->version < ID_X1000) {
+ tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+ tmp |= JZ4780_I2C_CTRL_STPHLD;
+ jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+ }
spin_unlock_irqrestore(&i2c->lock, flags);
@@ -626,14 +675,16 @@ static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c,
i2c->wbuf = buf;
i2c->wt_len = len;
- jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
+ jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, i2c->cdata->tx_level);
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, JZ4780_I2C_INTM_MTXEMP
| JZ4780_I2C_INTM_MTXABT);
- tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
- tmp |= JZ4780_I2C_CTRL_STPHLD;
- jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+ if (i2c->cdata->version < ID_X1000) {
+ tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+ tmp |= JZ4780_I2C_CTRL_STPHLD;
+ jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+ }
spin_unlock_irqrestore(&i2c->lock, flags);
@@ -716,8 +767,25 @@ static const struct i2c_algorithm jz4780_i2c_algorithm = {
.functionality = jz4780_i2c_functionality,
};
+static const struct ingenic_i2c_config jz4780_i2c_config = {
+ .version = ID_JZ4780,
+
+ .fifosize = JZ4780_I2C_FIFO_LEN,
+ .tx_level = JZ4780_I2C_FIFO_LEN / 2,
+ .rx_level = JZ4780_I2C_FIFO_LEN / 2 - 1,
+};
+
+static const struct ingenic_i2c_config x1000_i2c_config = {
+ .version = ID_X1000,
+
+ .fifosize = X1000_I2C_FIFO_LEN,
+ .tx_level = X1000_I2C_FIFO_LEN / 2,
+ .rx_level = X1000_I2C_FIFO_LEN / 2 - 1,
+};
+
static const struct of_device_id jz4780_i2c_of_matches[] = {
- { .compatible = "ingenic,jz4780-i2c", },
+ { .compatible = "ingenic,jz4780-i2c", .data = &jz4780_i2c_config },
+ { .compatible = "ingenic,x1000-i2c", .data = &x1000_i2c_config },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, jz4780_i2c_of_matches);
@@ -734,6 +802,12 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
if (!i2c)
return -ENOMEM;
+ i2c->cdata = device_get_match_data(&pdev->dev);
+ if (!i2c->cdata) {
+ dev_err(&pdev->dev, "Error: No device match found\n");
+ return -ENODEV;
+ }
+
i2c->adap.owner = THIS_MODULE;
i2c->adap.algo = &jz4780_i2c_algorithm;
i2c->adap.algo_data = i2c;
@@ -777,9 +851,11 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed);
- tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
- tmp &= ~JZ4780_I2C_CTRL_STPHLD;
- jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+ if (i2c->cdata->version < ID_X1000) {
+ tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+ tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+ jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+ }
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 1e2647f9a2a7..06b3bed78421 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -10,6 +10,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -213,6 +214,30 @@ static void meson_i2c_prepare_xfer(struct meson_i2c *i2c)
writel(i2c->tokens[1], i2c->regs + REG_TOK_LIST1);
}
+static void meson_i2c_transfer_complete(struct meson_i2c *i2c, u32 ctrl)
+{
+ if (ctrl & REG_CTRL_ERROR) {
+ /*
+ * The bit is set when the IGNORE_NAK bit is cleared
+ * and the device didn't respond. In this case, the
+ * I2C controller automatically generates a STOP
+ * condition.
+ */
+ dev_dbg(i2c->dev, "error bit set\n");
+ i2c->error = -ENXIO;
+ i2c->state = STATE_IDLE;
+ } else {
+ if (i2c->state == STATE_READ && i2c->count)
+ meson_i2c_get_data(i2c, i2c->msg->buf + i2c->pos,
+ i2c->count);
+
+ i2c->pos += i2c->count;
+
+ if (i2c->pos >= i2c->msg->len)
+ i2c->state = STATE_IDLE;
+ }
+}
+
static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
{
struct meson_i2c *i2c = dev_id;
@@ -232,27 +257,9 @@ static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
return IRQ_NONE;
}
- if (ctrl & REG_CTRL_ERROR) {
- /*
- * The bit is set when the IGNORE_NAK bit is cleared
- * and the device didn't respond. In this case, the
- * I2C controller automatically generates a STOP
- * condition.
- */
- dev_dbg(i2c->dev, "error bit set\n");
- i2c->error = -ENXIO;
- i2c->state = STATE_IDLE;
- complete(&i2c->done);
- goto out;
- }
-
- if (i2c->state == STATE_READ && i2c->count)
- meson_i2c_get_data(i2c, i2c->msg->buf + i2c->pos, i2c->count);
+ meson_i2c_transfer_complete(i2c, ctrl);
- i2c->pos += i2c->count;
-
- if (i2c->pos >= i2c->msg->len) {
- i2c->state = STATE_IDLE;
+ if (i2c->state == STATE_IDLE) {
complete(&i2c->done);
goto out;
}
@@ -279,10 +286,11 @@ static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
}
static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
- int last)
+ int last, bool atomic)
{
unsigned long time_left, flags;
int ret = 0;
+ u32 ctrl;
i2c->msg = msg;
i2c->last = last;
@@ -300,13 +308,24 @@ static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
meson_i2c_prepare_xfer(i2c);
- reinit_completion(&i2c->done);
+
+ if (!atomic)
+ reinit_completion(&i2c->done);
/* Start the transfer */
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START);
- time_left = msecs_to_jiffies(I2C_TIMEOUT_MS);
- time_left = wait_for_completion_timeout(&i2c->done, time_left);
+ if (atomic) {
+ ret = readl_poll_timeout_atomic(i2c->regs + REG_CTRL, ctrl,
+ !(ctrl & REG_CTRL_STATUS),
+ 10, I2C_TIMEOUT_MS * 1000);
+ } else {
+ time_left = msecs_to_jiffies(I2C_TIMEOUT_MS);
+ time_left = wait_for_completion_timeout(&i2c->done, time_left);
+
+ if (!time_left)
+ ret = -ETIMEDOUT;
+ }
/*
* Protect access to i2c struct and registers from interrupt
@@ -315,13 +334,14 @@ static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
*/
spin_lock_irqsave(&i2c->lock, flags);
+ if (atomic && !ret)
+ meson_i2c_transfer_complete(i2c, ctrl);
+
/* Abort any active operation */
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
- if (!time_left) {
+ if (ret)
i2c->state = STATE_IDLE;
- ret = -ETIMEDOUT;
- }
if (i2c->error)
ret = i2c->error;
@@ -331,8 +351,8 @@ static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
return ret;
}
-static int meson_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
- int num)
+static int meson_i2c_xfer_messages(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num, bool atomic)
{
struct meson_i2c *i2c = adap->algo_data;
int i, ret = 0;
@@ -340,7 +360,7 @@ static int meson_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
clk_enable(i2c->clk);
for (i = 0; i < num; i++) {
- ret = meson_i2c_xfer_msg(i2c, msgs + i, i == num - 1);
+ ret = meson_i2c_xfer_msg(i2c, msgs + i, i == num - 1, atomic);
if (ret)
break;
}
@@ -350,14 +370,27 @@ static int meson_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
return ret ?: i;
}
+static int meson_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ return meson_i2c_xfer_messages(adap, msgs, num, false);
+}
+
+static int meson_i2c_xfer_atomic(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ return meson_i2c_xfer_messages(adap, msgs, num, true);
+}
+
static u32 meson_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static const struct i2c_algorithm meson_i2c_algorithm = {
- .master_xfer = meson_i2c_xfer,
- .functionality = meson_i2c_func,
+ .master_xfer = meson_i2c_xfer,
+ .master_xfer_atomic = meson_i2c_xfer_atomic,
+ .functionality = meson_i2c_func,
};
static int meson_i2c_probe(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 5a1235fd86bb..62e18b4db0ed 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -280,9 +280,9 @@ static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
i2cd->gpu_ccgx_ucsi->addr = 0x8;
i2cd->gpu_ccgx_ucsi->irq = irq;
i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
- i2cd->ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
- if (!i2cd->ccgx_client)
- return -ENODEV;
+ i2cd->ccgx_client = i2c_new_client_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
+ if (IS_ERR(i2cd->ccgx_client))
+ return PTR_ERR(i2cd->ccgx_client);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index ca8b3ecfa93d..f5fc75b65a19 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -731,7 +731,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
/* add in known devices to the bus */
if (pdata) {
for (i = 0; i < pdata->num_devices; i++)
- i2c_new_device(&i2c->adap, pdata->devices + i);
+ i2c_new_client_device(&i2c->adap, pdata->devices + i);
}
return 0;
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
deleted file mode 100644
index 00f6aaf22cfc..000000000000
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* ------------------------------------------------------------------------ *
- * i2c-parport-light.c I2C bus over parallel port *
- * ------------------------------------------------------------------------ *
- Copyright (C) 2003-2010 Jean Delvare <jdelvare@suse.de>
-
- Based on older i2c-velleman.c driver
- Copyright (C) 1995-2000 Simon G. Vogl
- With some changes from:
- Frodo Looijaard <frodol@dds.nl>
- Kyösti Mälkki <kmalkki@cc.hut.fi>
-
- * ------------------------------------------------------------------------ */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-smbus.h>
-#include <linux/io.h>
-#include "i2c-parport.h"
-
-#define DEFAULT_BASE 0x378
-#define DRVNAME "i2c-parport-light"
-
-static struct platform_device *pdev;
-
-static u16 base;
-module_param_hw(base, ushort, ioport, 0);
-MODULE_PARM_DESC(base, "Base I/O address");
-
-static int irq;
-module_param_hw(irq, int, irq, 0);
-MODULE_PARM_DESC(irq, "IRQ (optional)");
-
-/* ----- Low-level parallel port access ----------------------------------- */
-
-static inline void port_write(unsigned char p, unsigned char d)
-{
- outb(d, base+p);
-}
-
-static inline unsigned char port_read(unsigned char p)
-{
- return inb(base+p);
-}
-
-/* ----- Unified line operation functions --------------------------------- */
-
-static inline void line_set(int state, const struct lineop *op)
-{
- u8 oldval = port_read(op->port);
-
- /* Touch only the bit(s) needed */
- if ((op->inverted && !state) || (!op->inverted && state))
- port_write(op->port, oldval | op->val);
- else
- port_write(op->port, oldval & ~op->val);
-}
-
-static inline int line_get(const struct lineop *op)
-{
- u8 oldval = port_read(op->port);
-
- return ((op->inverted && (oldval & op->val) != op->val)
- || (!op->inverted && (oldval & op->val) == op->val));
-}
-
-/* ----- I2C algorithm call-back functions and structures ----------------- */
-
-static void parport_setscl(void *data, int state)
-{
- line_set(state, &adapter_parm[type].setscl);
-}
-
-static void parport_setsda(void *data, int state)
-{
- line_set(state, &adapter_parm[type].setsda);
-}
-
-static int parport_getscl(void *data)
-{
- return line_get(&adapter_parm[type].getscl);
-}
-
-static int parport_getsda(void *data)
-{
- return line_get(&adapter_parm[type].getsda);
-}
-
-/* Encapsulate the functions above in the correct structure
- Note that getscl will be set to NULL by the attaching code for adapters
- that cannot read SCL back */
-static struct i2c_algo_bit_data parport_algo_data = {
- .setsda = parport_setsda,
- .setscl = parport_setscl,
- .getsda = parport_getsda,
- .getscl = parport_getscl,
- .udelay = 50,
- .timeout = HZ,
-};
-
-/* ----- Driver registration ---------------------------------------------- */
-
-static struct i2c_adapter parport_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON,
- .algo_data = &parport_algo_data,
- .name = "Parallel port adapter (light)",
-};
-
-/* SMBus alert support */
-static struct i2c_smbus_alert_setup alert_data = {
-};
-static struct i2c_client *ara;
-static struct lineop parport_ctrl_irq = {
- .val = (1 << 4),
- .port = PORT_CTRL,
-};
-
-static int i2c_parport_probe(struct platform_device *pdev)
-{
- int err;
-
- /* Reset hardware to a sane state (SCL and SDA high) */
- parport_setsda(NULL, 1);
- parport_setscl(NULL, 1);
- /* Other init if needed (power on...) */
- if (adapter_parm[type].init.val) {
- line_set(1, &adapter_parm[type].init);
- /* Give powered devices some time to settle */
- msleep(100);
- }
-
- parport_adapter.dev.parent = &pdev->dev;
- err = i2c_bit_add_bus(&parport_adapter);
- if (err) {
- dev_err(&pdev->dev, "Unable to register with I2C\n");
- return err;
- }
-
- /* Setup SMBus alert if supported */
- if (adapter_parm[type].smbus_alert && irq) {
- alert_data.irq = irq;
- ara = i2c_setup_smbus_alert(&parport_adapter, &alert_data);
- if (ara)
- line_set(1, &parport_ctrl_irq);
- else
- dev_warn(&pdev->dev, "Failed to register ARA client\n");
- }
-
- return 0;
-}
-
-static int i2c_parport_remove(struct platform_device *pdev)
-{
- if (ara) {
- line_set(0, &parport_ctrl_irq);
- i2c_unregister_device(ara);
- ara = NULL;
- }
- i2c_del_adapter(&parport_adapter);
-
- /* Un-init if needed (power off...) */
- if (adapter_parm[type].init.val)
- line_set(0, &adapter_parm[type].init);
-
- return 0;
-}
-
-static struct platform_driver i2c_parport_driver = {
- .driver = {
- .name = DRVNAME,
- },
- .probe = i2c_parport_probe,
- .remove = i2c_parport_remove,
-};
-
-static int __init i2c_parport_device_add(u16 address)
-{
- int err;
-
- pdev = platform_device_alloc(DRVNAME, -1);
- if (!pdev) {
- err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
- goto exit;
- }
-
- err = platform_device_add(pdev);
- if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
- goto exit_device_put;
- }
-
- return 0;
-
-exit_device_put:
- platform_device_put(pdev);
-exit:
- return err;
-}
-
-static int __init i2c_parport_init(void)
-{
- int err;
-
- if (type < 0) {
- printk(KERN_ERR DRVNAME ": adapter type unspecified\n");
- return -ENODEV;
- }
-
- if (type >= ARRAY_SIZE(adapter_parm)) {
- printk(KERN_ERR DRVNAME ": invalid type (%d)\n", type);
- return -ENODEV;
- }
-
- if (base == 0) {
- pr_info(DRVNAME ": using default base 0x%x\n", DEFAULT_BASE);
- base = DEFAULT_BASE;
- }
-
- if (!request_region(base, 3, DRVNAME))
- return -EBUSY;
-
- if (irq != 0)
- pr_info(DRVNAME ": using irq %d\n", irq);
-
- if (!adapter_parm[type].getscl.val)
- parport_algo_data.getscl = NULL;
-
- /* Sets global pdev as a side effect */
- err = i2c_parport_device_add(base);
- if (err)
- goto exit_release;
-
- err = platform_driver_register(&i2c_parport_driver);
- if (err)
- goto exit_device;
-
- return 0;
-
-exit_device:
- platform_device_unregister(pdev);
-exit_release:
- release_region(base, 3);
- return err;
-}
-
-static void __exit i2c_parport_exit(void)
-{
- platform_driver_unregister(&i2c_parport_driver);
- platform_device_unregister(pdev);
- release_region(base, 3);
-}
-
-MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
-MODULE_DESCRIPTION("I2C bus over parallel port (light)");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_parport_init);
-module_exit(i2c_parport_exit);
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index e8ed882de402..81eb441b2387 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -25,7 +25,90 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/mutex.h>
-#include "i2c-parport.h"
+
+#define PORT_DATA 0
+#define PORT_STAT 1
+#define PORT_CTRL 2
+
+struct lineop {
+ u8 val;
+ u8 port;
+ u8 inverted;
+};
+
+struct adapter_parm {
+ struct lineop setsda;
+ struct lineop setscl;
+ struct lineop getsda;
+ struct lineop getscl;
+ struct lineop init;
+ unsigned int smbus_alert:1;
+};
+
+static const struct adapter_parm adapter_parm[] = {
+ /* type 0: Philips adapter */
+ {
+ .setsda = { 0x80, PORT_DATA, 1 },
+ .setscl = { 0x08, PORT_CTRL, 0 },
+ .getsda = { 0x80, PORT_STAT, 0 },
+ .getscl = { 0x08, PORT_STAT, 0 },
+ },
+ /* type 1: home brew teletext adapter */
+ {
+ .setsda = { 0x02, PORT_DATA, 0 },
+ .setscl = { 0x01, PORT_DATA, 0 },
+ .getsda = { 0x80, PORT_STAT, 1 },
+ },
+ /* type 2: Velleman K8000 adapter */
+ {
+ .setsda = { 0x02, PORT_CTRL, 1 },
+ .setscl = { 0x08, PORT_CTRL, 1 },
+ .getsda = { 0x10, PORT_STAT, 0 },
+ },
+ /* type 3: ELV adapter */
+ {
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x40, PORT_STAT, 1 },
+ .getscl = { 0x08, PORT_STAT, 1 },
+ },
+ /* type 4: ADM1032 evaluation board */
+ {
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x10, PORT_STAT, 1 },
+ .init = { 0xf0, PORT_DATA, 0 },
+ .smbus_alert = 1,
+ },
+ /* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
+ {
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x10, PORT_STAT, 1 },
+ },
+ /* type 6: Barco LPT->DVI (K5800236) adapter */
+ {
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x20, PORT_STAT, 0 },
+ .getscl = { 0x40, PORT_STAT, 0 },
+ .init = { 0xfc, PORT_DATA, 0 },
+ },
+ /* type 7: One For All JP1 parallel port adapter */
+ {
+ .setsda = { 0x01, PORT_DATA, 0 },
+ .setscl = { 0x02, PORT_DATA, 0 },
+ .getsda = { 0x80, PORT_STAT, 1 },
+ .init = { 0x04, PORT_DATA, 1 },
+ },
+ /* type 8: VCT-jig */
+ {
+ .setsda = { 0x04, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x40, PORT_STAT, 0 },
+ .getscl = { 0x80, PORT_STAT, 1 },
+ },
+};
/* ----- Device list ------------------------------------------------------ */
@@ -40,9 +123,30 @@ struct i2c_par {
static LIST_HEAD(adapter_list);
static DEFINE_MUTEX(adapter_list_lock);
+
#define MAX_DEVICE 4
static int parport[MAX_DEVICE] = {0, -1, -1, -1};
+module_param_array(parport, int, NULL, 0);
+MODULE_PARM_DESC(parport,
+ "List of parallel ports to bind to, by index.\n"
+ " At most " __stringify(MAX_DEVICE) " devices are supported.\n"
+ " Default is one device connected to parport0.\n"
+);
+static int type = -1;
+module_param(type, int, 0);
+MODULE_PARM_DESC(type,
+ "Type of adapter:\n"
+ " 0 = Philips adapter\n"
+ " 1 = home brew teletext adapter\n"
+ " 2 = Velleman K8000 adapter\n"
+ " 3 = ELV adapter\n"
+ " 4 = ADM1032 evaluation board\n"
+ " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"
+ " 6 = Barco LPT->DVI (K5800236) adapter\n"
+ " 7 = One For All JP1 parallel port adapter\n"
+ " 8 = VCT-jig\n"
+);
/* ----- Low-level parallel port access ----------------------------------- */
@@ -311,12 +415,5 @@ MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("I2C bus over parallel port");
MODULE_LICENSE("GPL");
-module_param_array(parport, int, NULL, 0);
-MODULE_PARM_DESC(parport,
- "List of parallel ports to bind to, by index.\n"
- " Atmost " __stringify(MAX_DEVICE) " devices are supported.\n"
- " Default is one device connected to parport0.\n"
-);
-
module_init(i2c_parport_init);
module_exit(i2c_parport_exit);
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
deleted file mode 100644
index 3b32d92b1264..000000000000
--- a/drivers/i2c/busses/i2c-parport.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* ------------------------------------------------------------------------ *
- * i2c-parport.h I2C bus over parallel port *
- * ------------------------------------------------------------------------ *
- Copyright (C) 2003-2010 Jean Delvare <jdelvare@suse.de>
-
- * ------------------------------------------------------------------------ */
-
-#define PORT_DATA 0
-#define PORT_STAT 1
-#define PORT_CTRL 2
-
-struct lineop {
- u8 val;
- u8 port;
- u8 inverted;
-};
-
-struct adapter_parm {
- struct lineop setsda;
- struct lineop setscl;
- struct lineop getsda;
- struct lineop getscl;
- struct lineop init;
- unsigned int smbus_alert:1;
-};
-
-static const struct adapter_parm adapter_parm[] = {
- /* type 0: Philips adapter */
- {
- .setsda = { 0x80, PORT_DATA, 1 },
- .setscl = { 0x08, PORT_CTRL, 0 },
- .getsda = { 0x80, PORT_STAT, 0 },
- .getscl = { 0x08, PORT_STAT, 0 },
- },
- /* type 1: home brew teletext adapter */
- {
- .setsda = { 0x02, PORT_DATA, 0 },
- .setscl = { 0x01, PORT_DATA, 0 },
- .getsda = { 0x80, PORT_STAT, 1 },
- },
- /* type 2: Velleman K8000 adapter */
- {
- .setsda = { 0x02, PORT_CTRL, 1 },
- .setscl = { 0x08, PORT_CTRL, 1 },
- .getsda = { 0x10, PORT_STAT, 0 },
- },
- /* type 3: ELV adapter */
- {
- .setsda = { 0x02, PORT_DATA, 1 },
- .setscl = { 0x01, PORT_DATA, 1 },
- .getsda = { 0x40, PORT_STAT, 1 },
- .getscl = { 0x08, PORT_STAT, 1 },
- },
- /* type 4: ADM1032 evaluation board */
- {
- .setsda = { 0x02, PORT_DATA, 1 },
- .setscl = { 0x01, PORT_DATA, 1 },
- .getsda = { 0x10, PORT_STAT, 1 },
- .init = { 0xf0, PORT_DATA, 0 },
- .smbus_alert = 1,
- },
- /* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
- {
- .setsda = { 0x02, PORT_DATA, 1 },
- .setscl = { 0x01, PORT_DATA, 1 },
- .getsda = { 0x10, PORT_STAT, 1 },
- },
- /* type 6: Barco LPT->DVI (K5800236) adapter */
- {
- .setsda = { 0x02, PORT_DATA, 1 },
- .setscl = { 0x01, PORT_DATA, 1 },
- .getsda = { 0x20, PORT_STAT, 0 },
- .getscl = { 0x40, PORT_STAT, 0 },
- .init = { 0xfc, PORT_DATA, 0 },
- },
- /* type 7: One For All JP1 parallel port adapter */
- {
- .setsda = { 0x01, PORT_DATA, 0 },
- .setscl = { 0x02, PORT_DATA, 0 },
- .getsda = { 0x80, PORT_STAT, 1 },
- .init = { 0x04, PORT_DATA, 1 },
- },
- /* type 8: VCT-jig */
- {
- .setsda = { 0x04, PORT_DATA, 1 },
- .setscl = { 0x01, PORT_DATA, 1 },
- .getsda = { 0x40, PORT_STAT, 0 },
- .getscl = { 0x80, PORT_STAT, 1 },
- },
-};
-
-static int type = -1;
-module_param(type, int, 0);
-MODULE_PARM_DESC(type,
- "Type of adapter:\n"
- " 0 = Philips adapter\n"
- " 1 = home brew teletext adapter\n"
- " 2 = Velleman K8000 adapter\n"
- " 3 = ELV adapter\n"
- " 4 = ADM1032 evaluation board\n"
- " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"
- " 6 = Barco LPT->DVI (K5800236) adapter\n"
- " 7 = One For All JP1 parallel port adapter\n"
- " 8 = VCT-jig\n"
-);
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 4fde74eb34a7..5d89c7c1b3a8 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -274,8 +274,8 @@ static int pmcmsptwi_probe(struct platform_device *pldev)
if (!request_mem_region(res->start, resource_size(res),
pldev->name)) {
dev_err(&pldev->dev,
- "Unable to get memory/io address region 0x%08x\n",
- res->start);
+ "Unable to get memory/io address region %pap\n",
+ &res->start);
rc = -EBUSY;
goto ret_err;
}
@@ -285,7 +285,7 @@ static int pmcmsptwi_probe(struct platform_device *pldev)
resource_size(res));
if (!pmcmsptwi_data.iobase) {
dev_err(&pldev->dev,
- "Unable to ioremap address 0x%08x\n", res->start);
+ "Unable to ioremap address %pap\n", &res->start);
rc = -EIO;
goto ret_unreserve;
}
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 6e0e546ef83f..686c06f31625 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -734,8 +734,8 @@ static int i2c_pnx_probe(struct platform_device *pdev)
if (ret < 0)
goto out_clock;
- dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
- alg_data->adapter.name, res->start, alg_data->irq);
+ dev_dbg(&pdev->dev, "%s: Master at %pap, irq %d.\n",
+ alg_data->adapter.name, &res->start, alg_data->irq);
return 0;
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 504f5bf0e625..973e5339033c 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -240,8 +240,8 @@ static void i2c_powermac_create_one(struct i2c_adapter *adap,
strncpy(info.type, type, sizeof(info.type));
info.addr = addr;
- newdev = i2c_new_device(adap, &info);
- if (!newdev)
+ newdev = i2c_new_client_device(adap, &info);
+ if (IS_ERR(newdev))
dev_err(&adap->dev,
"i2c-powermac: Failure to register missing %s\n",
type);
@@ -359,8 +359,8 @@ static void i2c_powermac_register_devices(struct i2c_adapter *adap,
info.irq = irq_of_parse_and_map(node, 0);
info.of_node = of_node_get(node);
- newdev = i2c_new_device(adap, &info);
- if (!newdev) {
+ newdev = i2c_new_client_device(adap, &info);
+ if (IS_ERR(newdev)) {
dev_err(&adap->dev, "i2c-powermac: Failure to register"
" %pOF\n", node);
of_node_put(node);
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index b2634afe066d..5c3e8ac6ad92 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -169,6 +169,24 @@
#define STM32F7_AUTOSUSPEND_DELAY (HZ / 100)
/**
+ * struct stm32f7_i2c_regs - i2c f7 registers backup
+ * @cr1: Control register 1
+ * @cr2: Control register 2
+ * @oar1: Own address 1 register
+ * @oar2: Own address 2 register
+ * @pecr: PEC register
+ * @tmgr: Timing register
+ */
+struct stm32f7_i2c_regs {
+ u32 cr1;
+ u32 cr2;
+ u32 oar1;
+ u32 oar2;
+ u32 pecr;
+ u32 tmgr;
+};
+
+/**
* struct stm32f7_i2c_spec - private i2c specification timing
* @rate: I2C bus speed (Hz)
* @rate_min: 80% of I2C bus speed (Hz)
@@ -276,6 +294,7 @@ struct stm32f7_i2c_msg {
* @timing: I2C computed timings
* @slave: list of slave devices registered on the I2C bus
* @slave_running: slave device currently used
+ * @backup_regs: backup of i2c controller registers (for suspend/resume)
* @slave_dir: transfer direction for the current slave device
* @master_mode: boolean to know in which mode the I2C is running (master or
* slave)
@@ -298,6 +317,7 @@ struct stm32f7_i2c_dev {
struct stm32f7_i2c_timings timing;
struct i2c_client *slave[STM32F7_I2C_MAX_SLAVE];
struct i2c_client *slave_running;
+ struct stm32f7_i2c_regs backup_regs;
u32 slave_dir;
bool master_mode;
struct stm32_i2c_dma *dma;
@@ -2027,8 +2047,7 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-static int stm32f7_i2c_runtime_suspend(struct device *dev)
+static int __maybe_unused stm32f7_i2c_runtime_suspend(struct device *dev)
{
struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
@@ -2038,7 +2057,7 @@ static int stm32f7_i2c_runtime_suspend(struct device *dev)
return 0;
}
-static int stm32f7_i2c_runtime_resume(struct device *dev)
+static int __maybe_unused stm32f7_i2c_runtime_resume(struct device *dev)
{
struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
int ret;
@@ -2053,11 +2072,101 @@ static int stm32f7_i2c_runtime_resume(struct device *dev)
return 0;
}
-#endif
+
+static int __maybe_unused
+stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev)
+{
+ int ret;
+ struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs;
+
+ ret = pm_runtime_get_sync(i2c_dev->dev);
+ if (ret < 0)
+ return ret;
+
+ backup_regs->cr1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR1);
+ backup_regs->cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+ backup_regs->oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
+ backup_regs->oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
+ backup_regs->pecr = readl_relaxed(i2c_dev->base + STM32F7_I2C_PECR);
+ backup_regs->tmgr = readl_relaxed(i2c_dev->base + STM32F7_I2C_TIMINGR);
+
+ pm_runtime_put_sync(i2c_dev->dev);
+
+ return ret;
+}
+
+static int __maybe_unused
+stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev)
+{
+ u32 cr1;
+ int ret;
+ struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs;
+
+ ret = pm_runtime_get_sync(i2c_dev->dev);
+ if (ret < 0)
+ return ret;
+
+ cr1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR1);
+ if (cr1 & STM32F7_I2C_CR1_PE)
+ stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_PE);
+
+ writel_relaxed(backup_regs->tmgr, i2c_dev->base + STM32F7_I2C_TIMINGR);
+ writel_relaxed(backup_regs->cr1 & ~STM32F7_I2C_CR1_PE,
+ i2c_dev->base + STM32F7_I2C_CR1);
+ if (backup_regs->cr1 & STM32F7_I2C_CR1_PE)
+ stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_PE);
+ writel_relaxed(backup_regs->cr2, i2c_dev->base + STM32F7_I2C_CR2);
+ writel_relaxed(backup_regs->oar1, i2c_dev->base + STM32F7_I2C_OAR1);
+ writel_relaxed(backup_regs->oar2, i2c_dev->base + STM32F7_I2C_OAR2);
+ writel_relaxed(backup_regs->pecr, i2c_dev->base + STM32F7_I2C_PECR);
+
+ pm_runtime_put_sync(i2c_dev->dev);
+
+ return ret;
+}
+
+static int __maybe_unused stm32f7_i2c_suspend(struct device *dev)
+{
+ struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+ int ret;
+
+ i2c_mark_adapter_suspended(&i2c_dev->adap);
+ ret = stm32f7_i2c_regs_backup(i2c_dev);
+ if (ret < 0) {
+ i2c_mark_adapter_resumed(&i2c_dev->adap);
+ return ret;
+ }
+
+ pinctrl_pm_select_sleep_state(dev);
+ pm_runtime_force_suspend(dev);
+
+ return 0;
+}
+
+static int __maybe_unused stm32f7_i2c_resume(struct device *dev)
+{
+ struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret < 0)
+ return ret;
+ pinctrl_pm_select_default_state(dev);
+
+ ret = stm32f7_i2c_regs_restore(i2c_dev);
+ if (ret < 0)
+ return ret;
+ i2c_mark_adapter_resumed(&i2c_dev->adap);
+
+ return 0;
+}
static const struct dev_pm_ops stm32f7_i2c_pm_ops = {
SET_RUNTIME_PM_OPS(stm32f7_i2c_runtime_suspend,
stm32f7_i2c_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(stm32f7_i2c_suspend, stm32f7_i2c_resume)
};
static const struct of_device_id stm32f7_i2c_match[] = {
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 8c3e2d409d63..42e0a53e7fa4 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -444,7 +444,7 @@ static int stu300_wait_while_busy(struct stu300_dev *dev)
"Attempt: %d\n", i+1);
dev_err(&dev->pdev->dev, "base address = "
- "0x%08x, reinit hardware\n", (u32) dev->virtbase);
+ "0x%p, reinit hardware\n", dev->virtbase);
(void) stu300_init_hw(dev);
}
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index 0bff3f3a8779..b4050f5b6746 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -49,10 +49,10 @@ static struct i2c_client *taos_instantiate_device(struct i2c_adapter *adapter)
if (!strncmp(adapter->name, "TAOS TSL2550 EVM", 16)) {
dev_info(&adapter->dev, "Instantiating device %s at 0x%02x\n",
tsl2550_info.type, tsl2550_info.addr);
- return i2c_new_device(adapter, &tsl2550_info);
+ return i2c_new_client_device(adapter, &tsl2550_info);
}
- return NULL;
+ return ERR_PTR(-ENODEV);
}
static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 61339c665ebd..cbc2ad49043e 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -16,7 +16,9 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
+#include <linux/irq.h>
#include <linux/kernel.h>
+#include <linux/ktime.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
@@ -129,11 +131,12 @@
#define I2C_PACKET_HEADER_SIZE 12
/*
- * Upto I2C_PIO_MODE_MAX_LEN bytes, controller will use PIO mode,
- * above this, controller will use DMA to fill FIFO.
- * MAX PIO len is 20 bytes excluding packet header.
+ * I2C Controller will use PIO mode for transfers up to 32 bytes in order to
+ * avoid DMA overhead, otherwise external APB DMA controller will be used.
+ * Note that the actual MAX PIO length is 20 bytes because 32 bytes include
+ * I2C_PACKET_HEADER_SIZE.
*/
-#define I2C_PIO_MODE_MAX_LEN 32
+#define I2C_PIO_MODE_PREFERRED_LEN 32
/*
* msg_end_type: The bus control which need to be send at end of transfer.
@@ -230,7 +233,6 @@ struct tegra_i2c_hw_feature {
* @base_phys: physical base address of the I2C controller
* @cont_id: I2C controller ID, used for packet header
* @irq: IRQ number of transfer complete interrupt
- * @irq_disabled: used to track whether or not the interrupt is enabled
* @is_dvc: identifies the DVC I2C controller, has a different register layout
* @msg_complete: transfer completion notifier
* @msg_err: error code for completed message
@@ -240,7 +242,6 @@ struct tegra_i2c_hw_feature {
* @bus_clk_rate: current I2C bus clock rate
* @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
* @is_multimaster_mode: track if I2C controller is in multi-master mode
- * @xfer_lock: lock to serialize transfer submission and processing
* @tx_dma_chan: DMA transmit channel
* @rx_dma_chan: DMA receive channel
* @dma_phys: handle to DMA resources
@@ -248,6 +249,7 @@ struct tegra_i2c_hw_feature {
* @dma_buf_size: DMA buffer size
* @is_curr_dma_xfer: indicates active DMA transfer
* @dma_complete: DMA completion notifier
+ * @is_curr_atomic_xfer: indicates active atomic transfer
*/
struct tegra_i2c_dev {
struct device *dev;
@@ -260,7 +262,6 @@ struct tegra_i2c_dev {
phys_addr_t base_phys;
int cont_id;
int irq;
- bool irq_disabled;
int is_dvc;
struct completion msg_complete;
int msg_err;
@@ -270,8 +271,6 @@ struct tegra_i2c_dev {
u32 bus_clk_rate;
u16 clk_divisor_non_hs_mode;
bool is_multimaster_mode;
- /* xfer_lock: lock to serialize transfer submission and processing */
- spinlock_t xfer_lock;
struct dma_chan *tx_dma_chan;
struct dma_chan *rx_dma_chan;
dma_addr_t dma_phys;
@@ -279,17 +278,18 @@ struct tegra_i2c_dev {
unsigned int dma_buf_size;
bool is_curr_dma_xfer;
struct completion dma_complete;
+ bool is_curr_atomic_xfer;
};
static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
unsigned long reg)
{
- writel(val, i2c_dev->base + reg);
+ writel_relaxed(val, i2c_dev->base + reg);
}
static u32 dvc_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
{
- return readl(i2c_dev->base + reg);
+ return readl_relaxed(i2c_dev->base + reg);
}
/*
@@ -307,16 +307,16 @@ static unsigned long tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev,
static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
unsigned long reg)
{
- writel(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+ writel_relaxed(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
/* Read back register to make sure that register writes completed */
if (reg != I2C_TX_FIFO)
- readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+ readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
}
static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
{
- return readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+ return readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
}
static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
@@ -687,13 +687,15 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD);
addr = i2c_dev->base + reg_offset;
i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
- if (in_interrupt())
- err = readl_poll_timeout_atomic(addr, val, val == 0,
- 1000,
- I2C_CONFIG_LOAD_TIMEOUT);
+
+ if (i2c_dev->is_curr_atomic_xfer)
+ err = readl_relaxed_poll_timeout_atomic(
+ addr, val, val == 0, 1000,
+ I2C_CONFIG_LOAD_TIMEOUT);
else
- err = readl_poll_timeout(addr, val, val == 0, 1000,
- I2C_CONFIG_LOAD_TIMEOUT);
+ err = readl_relaxed_poll_timeout(
+ addr, val, val == 0, 1000,
+ I2C_CONFIG_LOAD_TIMEOUT);
if (err) {
dev_warn(i2c_dev->dev,
@@ -790,11 +792,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
if (err)
return err;
- if (i2c_dev->irq_disabled) {
- i2c_dev->irq_disabled = false;
- enable_irq(i2c_dev->irq);
- }
-
return 0;
}
@@ -825,18 +822,12 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
status = i2c_readl(i2c_dev, I2C_INT_STATUS);
- spin_lock(&i2c_dev->xfer_lock);
if (status == 0) {
dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
i2c_readl(i2c_dev, I2C_STATUS),
i2c_readl(i2c_dev, I2C_CNFG));
i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT;
-
- if (!i2c_dev->irq_disabled) {
- disable_irq_nosync(i2c_dev->irq);
- i2c_dev->irq_disabled = true;
- }
goto err;
}
@@ -925,7 +916,6 @@ err:
complete(&i2c_dev->msg_complete);
done:
- spin_unlock(&i2c_dev->xfer_lock);
return IRQ_HANDLED;
}
@@ -999,6 +989,64 @@ out:
i2c_writel(i2c_dev, val, reg);
}
+static unsigned long
+tegra_i2c_poll_completion_timeout(struct tegra_i2c_dev *i2c_dev,
+ struct completion *complete,
+ unsigned int timeout_ms)
+{
+ ktime_t ktime = ktime_get();
+ ktime_t ktimeout = ktime_add_ms(ktime, timeout_ms);
+
+ do {
+ u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS);
+
+ if (status) {
+ tegra_i2c_isr(i2c_dev->irq, i2c_dev);
+
+ if (completion_done(complete)) {
+ s64 delta = ktime_ms_delta(ktimeout, ktime);
+
+ return msecs_to_jiffies(delta) ?: 1;
+ }
+ }
+
+ ktime = ktime_get();
+
+ } while (ktime_before(ktime, ktimeout));
+
+ return 0;
+}
+
+static unsigned long
+tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
+ struct completion *complete,
+ unsigned int timeout_ms)
+{
+ unsigned long ret;
+
+ if (i2c_dev->is_curr_atomic_xfer) {
+ ret = tegra_i2c_poll_completion_timeout(i2c_dev, complete,
+ timeout_ms);
+ } else {
+ enable_irq(i2c_dev->irq);
+ ret = wait_for_completion_timeout(complete,
+ msecs_to_jiffies(timeout_ms));
+ disable_irq(i2c_dev->irq);
+
+ /*
+ * There is a chance that completion may happen after IRQ
+ * synchronization, which is done by disable_irq().
+ */
+ if (ret == 0 && completion_done(complete)) {
+ dev_warn(i2c_dev->dev,
+ "completion done after timeout\n");
+ ret = 1;
+ }
+ }
+
+ return ret;
+}
+
static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
{
struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
@@ -1020,8 +1068,8 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
- time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
- msecs_to_jiffies(50));
+ time_left = tegra_i2c_wait_completion_timeout(
+ i2c_dev, &i2c_dev->msg_complete, 50);
if (time_left == 0) {
dev_err(i2c_dev->dev, "timed out for bus clear\n");
return -ETIMEDOUT;
@@ -1044,7 +1092,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
u32 packet_header;
u32 int_mask;
unsigned long time_left;
- unsigned long flags;
size_t xfer_size;
u32 *buffer = NULL;
int err = 0;
@@ -1065,8 +1112,9 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
xfer_size = msg->len + I2C_PACKET_HEADER_SIZE;
xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
- i2c_dev->is_curr_dma_xfer = (xfer_size > I2C_PIO_MODE_MAX_LEN) &&
- i2c_dev->dma_buf;
+ i2c_dev->is_curr_dma_xfer = (xfer_size > I2C_PIO_MODE_PREFERRED_LEN) &&
+ i2c_dev->dma_buf &&
+ !i2c_dev->is_curr_atomic_xfer;
tegra_i2c_config_fifo_trig(i2c_dev, xfer_size);
dma = i2c_dev->is_curr_dma_xfer;
/*
@@ -1075,7 +1123,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
*/
xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC,
i2c_dev->bus_clk_rate);
- spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
tegra_i2c_unmask_irq(i2c_dev, int_mask);
@@ -1090,7 +1137,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
dev_err(i2c_dev->dev,
"starting RX DMA failed, err %d\n",
err);
- goto unlock;
+ return err;
}
} else {
@@ -1149,7 +1196,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
dev_err(i2c_dev->dev,
"starting TX DMA failed, err %d\n",
err);
- goto unlock;
+ return err;
}
} else {
tegra_i2c_fill_tx_fifo(i2c_dev);
@@ -1169,20 +1216,16 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
i2c_readl(i2c_dev, I2C_INT_MASK));
-unlock:
- spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
-
if (dma) {
- if (err)
- return err;
+ time_left = tegra_i2c_wait_completion_timeout(
+ i2c_dev, &i2c_dev->dma_complete, xfer_time);
+
+ dmaengine_terminate_sync(i2c_dev->msg_read ?
+ i2c_dev->rx_dma_chan :
+ i2c_dev->tx_dma_chan);
- time_left = wait_for_completion_timeout(&i2c_dev->dma_complete,
- msecs_to_jiffies(xfer_time));
- if (time_left == 0) {
+ if (!time_left && !completion_done(&i2c_dev->dma_complete)) {
dev_err(i2c_dev->dev, "DMA transfer timeout\n");
- dmaengine_terminate_sync(i2c_dev->msg_read ?
- i2c_dev->rx_dma_chan :
- i2c_dev->tx_dma_chan);
tegra_i2c_init(i2c_dev, true);
return -ETIMEDOUT;
}
@@ -1195,20 +1238,15 @@ unlock:
memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf,
msg->len);
}
-
- if (i2c_dev->msg_err != I2C_ERR_NONE)
- dmaengine_synchronize(i2c_dev->msg_read ?
- i2c_dev->rx_dma_chan :
- i2c_dev->tx_dma_chan);
}
- time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
- msecs_to_jiffies(xfer_time));
+ time_left = tegra_i2c_wait_completion_timeout(
+ i2c_dev, &i2c_dev->msg_complete, xfer_time);
+
tegra_i2c_mask_irq(i2c_dev, int_mask);
if (time_left == 0) {
dev_err(i2c_dev->dev, "i2c transfer timed out\n");
-
tegra_i2c_init(i2c_dev, true);
return -ETIMEDOUT;
}
@@ -1270,6 +1308,19 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
return ret ?: i;
}
+static int tegra_i2c_xfer_atomic(struct i2c_adapter *adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+ int ret;
+
+ i2c_dev->is_curr_atomic_xfer = true;
+ ret = tegra_i2c_xfer(adap, msgs, num);
+ i2c_dev->is_curr_atomic_xfer = false;
+
+ return ret;
+}
+
static u32 tegra_i2c_func(struct i2c_adapter *adap)
{
struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
@@ -1297,8 +1348,9 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
}
static const struct i2c_algorithm tegra_i2c_algo = {
- .master_xfer = tegra_i2c_xfer,
- .functionality = tegra_i2c_func,
+ .master_xfer = tegra_i2c_xfer,
+ .master_xfer_atomic = tegra_i2c_xfer_atomic,
+ .functionality = tegra_i2c_func,
};
/* payload size is only 12 bit */
@@ -1568,7 +1620,6 @@ static int tegra_i2c_probe(struct platform_device *pdev)
I2C_PACKET_HEADER_SIZE;
init_completion(&i2c_dev->msg_complete);
init_completion(&i2c_dev->dma_complete);
- spin_lock_init(&i2c_dev->xfer_lock);
if (!i2c_dev->hw->has_single_clk_source) {
fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
@@ -1607,6 +1658,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
goto unprepare_fast_clk;
}
+ pm_runtime_irq_safe(&pdev->dev);
pm_runtime_enable(&pdev->dev);
if (!pm_runtime_enabled(&pdev->dev)) {
ret = tegra_i2c_runtime_resume(&pdev->dev);
@@ -1644,6 +1696,8 @@ static int tegra_i2c_probe(struct platform_device *pdev)
goto release_dma;
}
+ irq_set_status_flags(i2c_dev->irq, IRQ_NOAUTOEN);
+
ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index 43e3603489ee..7279ca0eaa2d 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -84,7 +84,7 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
pmsg->buf, pmsg->len) != pmsg->len) {
dev_err(&adapter->dev,
"failure reading data\n");
- ret = -EREMOTEIO;
+ ret = -EIO;
goto out;
}
} else {
@@ -94,7 +94,7 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
pmsg->buf, pmsg->len) != pmsg->len) {
dev_err(&adapter->dev,
"failure writing data\n");
- ret = -EREMOTEIO;
+ ret = -EIO;
goto out;
}
}
@@ -102,13 +102,13 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
/* read status */
if (usb_read(adapter, CMD_GET_STATUS, 0, 0, pstatus, 1) != 1) {
dev_err(&adapter->dev, "failure reading status\n");
- ret = -EREMOTEIO;
+ ret = -EIO;
goto out;
}
dev_dbg(&adapter->dev, " status = %d\n", *pstatus);
if (*pstatus == STATUS_ADDRESS_NAK) {
- ret = -EREMOTEIO;
+ ret = -ENXIO;
goto out;
}
}
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index d8d49f1814c7..90c1c362394d 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -156,6 +156,8 @@ struct xiic_i2c {
#define XIIC_RESET_MASK 0xAUL
#define XIIC_PM_TIMEOUT 1000 /* ms */
+/* timeout waiting for the controller to respond */
+#define XIIC_I2C_TIMEOUT (msecs_to_jiffies(1000))
/*
* The following constant is used for the device global interrupt enable
* register, to enable all interrupts for the device, this is the only bit
@@ -166,7 +168,7 @@ struct xiic_i2c {
#define xiic_tx_space(i2c) ((i2c)->tx_msg->len - (i2c)->tx_pos)
#define xiic_rx_space(i2c) ((i2c)->rx_msg->len - (i2c)->rx_pos)
-static void xiic_start_xfer(struct xiic_i2c *i2c);
+static int xiic_start_xfer(struct xiic_i2c *i2c);
static void __xiic_start_xfer(struct xiic_i2c *i2c);
/*
@@ -247,17 +249,29 @@ static inline void xiic_irq_clr_en(struct xiic_i2c *i2c, u32 mask)
xiic_irq_en(i2c, mask);
}
-static void xiic_clear_rx_fifo(struct xiic_i2c *i2c)
+static int xiic_clear_rx_fifo(struct xiic_i2c *i2c)
{
u8 sr;
+ unsigned long timeout;
+
+ timeout = jiffies + XIIC_I2C_TIMEOUT;
for (sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
!(sr & XIIC_SR_RX_FIFO_EMPTY_MASK);
- sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET))
+ sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET)) {
xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
+ if (time_after(jiffies, timeout)) {
+ dev_err(i2c->dev, "Failed to clear rx fifo\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
}
-static void xiic_reinit(struct xiic_i2c *i2c)
+static int xiic_reinit(struct xiic_i2c *i2c)
{
+ int ret;
+
xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
/* Set receive Fifo depth to maximum (zero based). */
@@ -270,12 +284,16 @@ static void xiic_reinit(struct xiic_i2c *i2c)
xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_ENABLE_DEVICE_MASK);
/* make sure RX fifo is empty */
- xiic_clear_rx_fifo(i2c);
+ ret = xiic_clear_rx_fifo(i2c);
+ if (ret)
+ return ret;
/* Enable interrupts */
xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
xiic_irq_clr_en(i2c, XIIC_INTR_ARB_LOST_MASK);
+
+ return 0;
}
static void xiic_deinit(struct xiic_i2c *i2c)
@@ -655,12 +673,18 @@ static void __xiic_start_xfer(struct xiic_i2c *i2c)
}
-static void xiic_start_xfer(struct xiic_i2c *i2c)
+static int xiic_start_xfer(struct xiic_i2c *i2c)
{
+ int ret;
mutex_lock(&i2c->lock);
- xiic_reinit(i2c);
- __xiic_start_xfer(i2c);
+
+ ret = xiic_reinit(i2c);
+ if (!ret)
+ __xiic_start_xfer(i2c);
+
mutex_unlock(&i2c->lock);
+
+ return ret;
}
static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
@@ -682,7 +706,11 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
i2c->tx_msg = msgs;
i2c->nmsgs = num;
- xiic_start_xfer(i2c);
+ err = xiic_start_xfer(i2c);
+ if (err < 0) {
+ dev_err(adap->dev.parent, "Error xiic_start_xfer\n");
+ goto out;
+ }
if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
(i2c->state == STATE_DONE), HZ)) {
@@ -760,7 +788,8 @@ static int xiic_i2c_probe(struct platform_device *pdev)
i2c->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c->clk)) {
- dev_err(&pdev->dev, "input clock not found.\n");
+ if (PTR_ERR(i2c->clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "input clock not found.\n");
return PTR_ERR(i2c->clk);
}
ret = clk_prepare_enable(i2c->clk);
@@ -769,10 +798,10 @@ static int xiic_i2c_probe(struct platform_device *pdev)
return ret;
}
i2c->dev = &pdev->dev;
- pm_runtime_enable(i2c->dev);
pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
pm_runtime_use_autosuspend(i2c->dev);
pm_runtime_set_active(i2c->dev);
+ pm_runtime_enable(i2c->dev);
ret = devm_request_threaded_irq(&pdev->dev, irq, xiic_isr,
xiic_process, IRQF_ONESHOT,
pdev->name, i2c);
@@ -794,7 +823,11 @@ static int xiic_i2c_probe(struct platform_device *pdev)
if (!(sr & XIIC_SR_TX_FIFO_EMPTY_MASK))
i2c->endianness = BIG;
- xiic_reinit(i2c);
+ ret = xiic_reinit(i2c);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot xiic_reinit\n");
+ goto err_clk_dis;
+ }
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
@@ -806,7 +839,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
if (pdata) {
/* add in known devices to the bus */
for (i = 0; i < pdata->num_devices; i++)
- i2c_new_device(&i2c->adap, pdata->devices + i);
+ i2c_new_client_device(&i2c->adap, pdata->devices + i);
}
return 0;
@@ -826,14 +859,16 @@ static int xiic_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);
- ret = clk_prepare_enable(i2c->clk);
- if (ret) {
- dev_err(&pdev->dev, "Unable to enable clock.\n");
+ ret = pm_runtime_get_sync(i2c->dev);
+ if (ret < 0)
return ret;
- }
+
xiic_deinit(i2c);
+ pm_runtime_put_sync(i2c->dev);
clk_disable_unprepare(i2c->clk);
pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
return 0;
}
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index 62a1c92ab803..8f3dbc97a057 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -225,7 +225,7 @@ static void i2c_acpi_register_device(struct i2c_adapter *adapter,
adev->power.flags.ignore_parent = true;
acpi_device_set_enumerated(adev);
- if (!i2c_new_device(adapter, info)) {
+ if (IS_ERR(i2c_new_client_device(adapter, info))) {
adev->power.flags.ignore_parent = false;
dev_err(&adapter->dev,
"failed to add I2C device %s from ACPI\n",
@@ -451,7 +451,8 @@ struct notifier_block i2c_acpi_notifier = {
* resources, in that case this function can be used to create an i2c-client
* for other I2cSerialBus resources in the Current Resource Settings table.
*
- * Also see i2c_new_device, which this function calls to create the i2c-client.
+ * Also see i2c_new_client_device, which this function calls to create the
+ * i2c-client.
*
* Returns a pointer to the new i2c-client, or error pointer in case of failure.
* Specifically, -EPROBE_DEFER is returned if the adapter is not found.
@@ -461,7 +462,6 @@ struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
{
struct i2c_acpi_lookup lookup;
struct i2c_adapter *adapter;
- struct i2c_client *client;
struct acpi_device *adev;
LIST_HEAD(resource_list);
int ret;
@@ -489,11 +489,7 @@ struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
if (!adapter)
return ERR_PTR(-EPROBE_DEFER);
- client = i2c_new_device(adapter, info);
- if (!client)
- return ERR_PTR(-ENODEV);
-
- return client;
+ return i2c_new_client_device(adapter, info);
}
EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 35b209797d7b..cefad0881942 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -456,15 +456,15 @@ static void i2c_client_dev_release(struct device *dev)
}
static ssize_t
-show_name(struct device *dev, struct device_attribute *attr, char *buf)
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
}
-static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static DEVICE_ATTR_RO(name);
static ssize_t
-show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
int len;
@@ -479,7 +479,7 @@ show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
}
-static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
+static DEVICE_ATTR_RO(modalias);
static struct attribute *i2c_dev_attrs[] = {
&dev_attr_name.attr,
@@ -831,8 +831,8 @@ EXPORT_SYMBOL_GPL(i2c_new_device);
/**
- * i2c_unregister_device - reverse effect of i2c_new_device()
- * @client: value returned from i2c_new_device()
+ * i2c_unregister_device - reverse effect of i2c_new_*_device()
+ * @client: value returned from i2c_new_*_device()
* Context: can sleep
*/
void i2c_unregister_device(struct i2c_client *client)
@@ -1023,8 +1023,8 @@ EXPORT_SYMBOL_GPL(i2c_adapter_depth);
* the user to provide incorrect parameters.
*/
static ssize_t
-i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+new_device_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_adapter *adap = to_i2c_adapter(dev);
struct i2c_board_info info;
@@ -1079,7 +1079,7 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
return count;
}
-static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
+static DEVICE_ATTR_WO(new_device);
/*
* And of course let the users delete the devices they instantiated, if
@@ -1091,8 +1091,8 @@ static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
* the user to delete the wrong device.
*/
static ssize_t
-i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+delete_device_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_adapter *adap = to_i2c_adapter(dev);
struct i2c_client *client, *next;
@@ -1135,7 +1135,7 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
return res;
}
static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
- i2c_sysfs_delete_device);
+ delete_device_store);
static struct attribute *i2c_adapter_attrs[] = {
&dev_attr_name.attr,
@@ -1178,9 +1178,8 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
down_read(&__i2c_board_lock);
list_for_each_entry(devinfo, &__i2c_board_list, list) {
- if (devinfo->busnum == adapter->nr
- && !i2c_new_device(adapter,
- &devinfo->board_info))
+ if (devinfo->busnum == adapter->nr &&
+ IS_ERR(i2c_new_client_device(adapter, &devinfo->board_info)))
dev_err(&adapter->dev,
"Can't create device at 0x%02x\n",
devinfo->board_info.addr);
@@ -2167,8 +2166,8 @@ static int i2c_detect_address(struct i2c_client *temp_client,
dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
info.type, info.addr);
- client = i2c_new_device(adapter, &info);
- if (client)
+ client = i2c_new_client_device(adapter, &info);
+ if (!IS_ERR(client))
list_add_tail(&client->detected, &driver->clients);
else
dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n",
diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c
index e4d296b40baa..6787c1f71483 100644
--- a/drivers/i2c/i2c-core-of.c
+++ b/drivers/i2c/i2c-core-of.c
@@ -75,11 +75,10 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
if (ret)
return ERR_PTR(ret);
- client = i2c_new_device(adap, &info);
- if (!client) {
+ client = i2c_new_client_device(adap, &info);
+ if (IS_ERR(client))
dev_err(&adap->dev, "of_i2c: Failure registering %pOF\n", node);
- return ERR_PTR(-EINVAL);
- }
+
return client;
}
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index 50e1fb4aedf5..6daec8d3d331 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -16,6 +16,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/i2c.h>
@@ -42,20 +43,20 @@
#define PCA9541_CONTROL 0x01
#define PCA9541_ISTAT 0x02
-#define PCA9541_CTL_MYBUS (1 << 0)
-#define PCA9541_CTL_NMYBUS (1 << 1)
-#define PCA9541_CTL_BUSON (1 << 2)
-#define PCA9541_CTL_NBUSON (1 << 3)
-#define PCA9541_CTL_BUSINIT (1 << 4)
-#define PCA9541_CTL_TESTON (1 << 6)
-#define PCA9541_CTL_NTESTON (1 << 7)
-
-#define PCA9541_ISTAT_INTIN (1 << 0)
-#define PCA9541_ISTAT_BUSINIT (1 << 1)
-#define PCA9541_ISTAT_BUSOK (1 << 2)
-#define PCA9541_ISTAT_BUSLOST (1 << 3)
-#define PCA9541_ISTAT_MYTEST (1 << 6)
-#define PCA9541_ISTAT_NMYTEST (1 << 7)
+#define PCA9541_CTL_MYBUS BIT(0)
+#define PCA9541_CTL_NMYBUS BIT(1)
+#define PCA9541_CTL_BUSON BIT(2)
+#define PCA9541_CTL_NBUSON BIT(3)
+#define PCA9541_CTL_BUSINIT BIT(4)
+#define PCA9541_CTL_TESTON BIT(6)
+#define PCA9541_CTL_NTESTON BIT(7)
+
+#define PCA9541_ISTAT_INTIN BIT(0)
+#define PCA9541_ISTAT_BUSINIT BIT(1)
+#define PCA9541_ISTAT_BUSOK BIT(2)
+#define PCA9541_ISTAT_BUSLOST BIT(3)
+#define PCA9541_ISTAT_MYTEST BIT(6)
+#define PCA9541_ISTAT_NMYTEST BIT(7)
#define BUSON (PCA9541_CTL_BUSON | PCA9541_CTL_NBUSON)
#define MYBUS (PCA9541_CTL_MYBUS | PCA9541_CTL_NMYBUS)
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 923aa3a5a3dc..a0d926ae3f86 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -86,7 +86,7 @@ struct pca954x {
u8 last_chan; /* last register value */
/* MUX_IDLE_AS_IS, MUX_IDLE_DISCONNECT or >= 0 for channel */
- s8 idle_state;
+ s32 idle_state;
struct i2c_client *client;
@@ -229,20 +229,23 @@ static int pca954x_reg_write(struct i2c_adapter *adap,
I2C_SMBUS_BYTE, &dummy);
}
+static u8 pca954x_regval(struct pca954x *data, u8 chan)
+{
+ /* We make switches look like muxes, not sure how to be smarter. */
+ if (data->chip->muxtype == pca954x_ismux)
+ return chan | data->chip->enable;
+ else
+ return 1 << chan;
+}
+
static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
{
struct pca954x *data = i2c_mux_priv(muxc);
struct i2c_client *client = data->client;
- const struct chip_desc *chip = data->chip;
u8 regval;
int ret = 0;
- /* we make switches look like muxes, not sure how to be smarter */
- if (chip->muxtype == pca954x_ismux)
- regval = chan | chip->enable;
- else
- regval = 1 << chan;
-
+ regval = pca954x_regval(data, chan);
/* Only select the channel if its different from the last channel */
if (data->last_chan != regval) {
ret = pca954x_reg_write(muxc->parent, client, regval);
@@ -256,7 +259,7 @@ static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
{
struct pca954x *data = i2c_mux_priv(muxc);
struct i2c_client *client = data->client;
- s8 idle_state;
+ s32 idle_state;
idle_state = READ_ONCE(data->idle_state);
if (idle_state >= 0)
@@ -402,6 +405,22 @@ static void pca954x_cleanup(struct i2c_mux_core *muxc)
i2c_mux_del_adapters(muxc);
}
+static int pca954x_init(struct i2c_client *client, struct pca954x *data)
+{
+ int ret;
+
+ if (data->idle_state >= 0)
+ data->last_chan = pca954x_regval(data, data->idle_state);
+ else
+ data->last_chan = 0; /* Disconnect multiplexer */
+
+ ret = i2c_smbus_write_byte(client, data->last_chan);
+ if (ret < 0)
+ data->last_chan = 0;
+
+ return ret;
+}
+
/*
* I2C init/probing/exit functions
*/
@@ -411,7 +430,6 @@ static int pca954x_probe(struct i2c_client *client,
struct i2c_adapter *adap = client->adapter;
struct device *dev = &client->dev;
struct device_node *np = dev->of_node;
- bool idle_disconnect_dt;
struct gpio_desc *gpio;
struct i2c_mux_core *muxc;
struct pca954x *data;
@@ -462,23 +480,24 @@ static int pca954x_probe(struct i2c_client *client,
}
}
- /* Write the mux register at addr to verify
+ data->idle_state = MUX_IDLE_AS_IS;
+ if (of_property_read_u32(np, "idle-state", &data->idle_state)) {
+ if (np && of_property_read_bool(np, "i2c-mux-idle-disconnect"))
+ data->idle_state = MUX_IDLE_DISCONNECT;
+ }
+
+ /*
+ * Write the mux register at addr to verify
* that the mux is in fact present. This also
- * initializes the mux to disconnected state.
+ * initializes the mux to a channel
+ * or disconnected state.
*/
- if (i2c_smbus_write_byte(client, 0) < 0) {
+ ret = pca954x_init(client, data);
+ if (ret < 0) {
dev_warn(dev, "probe failed\n");
return -ENODEV;
}
- data->last_chan = 0; /* force the first selection */
- data->idle_state = MUX_IDLE_AS_IS;
-
- idle_disconnect_dt = np &&
- of_property_read_bool(np, "i2c-mux-idle-disconnect");
- if (idle_disconnect_dt)
- data->idle_state = MUX_IDLE_DISCONNECT;
-
ret = pca954x_irq_setup(muxc);
if (ret)
goto fail_cleanup;
@@ -530,9 +549,13 @@ static int pca954x_resume(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct i2c_mux_core *muxc = i2c_get_clientdata(client);
struct pca954x *data = i2c_mux_priv(muxc);
+ int ret;
- data->last_chan = 0;
- return i2c_smbus_write_byte(client, 0);
+ ret = pca954x_init(client, data);
+ if (ret < 0)
+ dev_err(&client->dev, "failed to verify mux presence\n");
+
+ return ret;
}
#endif
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 0681d5fdd538..031eb64549af 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at24.c - handle most I2C EEPROMs
*
@@ -6,23 +6,23 @@
* Copyright (C) 2008 Wolfram Sang, Pengutronix
*/
-#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
#include <linux/mutex.h>
-#include <linux/mod_devicetable.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-#include <linux/property.h>
-#include <linux/acpi.h>
-#include <linux/i2c.h>
#include <linux/nvmem-provider.h>
-#include <linux/regmap.h>
+#include <linux/of_device.h>
#include <linux/pm_runtime.h>
-#include <linux/gpio/consumer.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
/* Address pointer is 16 bit. */
#define AT24_FLAG_ADDR16 BIT(7)
@@ -88,8 +88,7 @@ struct at24_data {
u8 flags;
struct nvmem_device *nvmem;
-
- struct gpio_desc *wp_gpio;
+ struct regulator *vcc_reg;
/*
* Some chips tie up multiple I2C addresses; dummy devices reserve
@@ -457,12 +456,10 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
* from this host, but not from other I2C masters.
*/
mutex_lock(&at24->lock);
- gpiod_set_value_cansleep(at24->wp_gpio, 0);
while (count) {
ret = at24_regmap_write(at24, buf, off, count);
if (ret < 0) {
- gpiod_set_value_cansleep(at24->wp_gpio, 1);
mutex_unlock(&at24->lock);
pm_runtime_put(dev);
return ret;
@@ -472,7 +469,6 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
count -= ret;
}
- gpiod_set_value_cansleep(at24->wp_gpio, 1);
mutex_unlock(&at24->lock);
pm_runtime_put(dev);
@@ -662,9 +658,9 @@ static int at24_probe(struct i2c_client *client)
at24->client[0].client = client;
at24->client[0].regmap = regmap;
- at24->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_HIGH);
- if (IS_ERR(at24->wp_gpio))
- return PTR_ERR(at24->wp_gpio);
+ at24->vcc_reg = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(at24->vcc_reg))
+ return PTR_ERR(at24->vcc_reg);
writable = !(flags & AT24_FLAG_READONLY);
if (writable) {
@@ -701,6 +697,12 @@ static int at24_probe(struct i2c_client *client)
i2c_set_clientdata(client, at24);
+ err = regulator_enable(at24->vcc_reg);
+ if (err) {
+ dev_err(dev, "Failed to enable vcc regulator\n");
+ return err;
+ }
+
/* enable runtime pm */
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
@@ -713,6 +715,7 @@ static int at24_probe(struct i2c_client *client)
pm_runtime_idle(dev);
if (err) {
pm_runtime_disable(dev);
+ regulator_disable(at24->vcc_reg);
return -ENODEV;
}
@@ -728,15 +731,42 @@ static int at24_probe(struct i2c_client *client)
static int at24_remove(struct i2c_client *client)
{
+ struct at24_data *at24 = i2c_get_clientdata(client);
+
pm_runtime_disable(&client->dev);
+ if (!pm_runtime_status_suspended(&client->dev))
+ regulator_disable(at24->vcc_reg);
pm_runtime_set_suspended(&client->dev);
return 0;
}
+static int __maybe_unused at24_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct at24_data *at24 = i2c_get_clientdata(client);
+
+ return regulator_disable(at24->vcc_reg);
+}
+
+static int __maybe_unused at24_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct at24_data *at24 = i2c_get_clientdata(client);
+
+ return regulator_enable(at24->vcc_reg);
+}
+
+static const struct dev_pm_ops at24_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(at24_suspend, at24_resume, NULL)
+};
+
static struct i2c_driver at24_driver = {
.driver = {
.name = "at24",
+ .pm = &at24_pm_ops,
.of_match_table = at24_of_match,
.acpi_match_table = ACPI_PTR(at24_acpi_ids),
},
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 1e4a798dce6e..ef326f243f36 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/nvmem-provider.h>
+#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/slab.h>
#include "nvmem.h"
@@ -54,8 +55,14 @@ static int nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
static int nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
void *val, size_t bytes)
{
- if (nvmem->reg_write)
- return nvmem->reg_write(nvmem->priv, offset, val, bytes);
+ int ret;
+
+ if (nvmem->reg_write) {
+ gpiod_set_value_cansleep(nvmem->wp_gpio, 0);
+ ret = nvmem->reg_write(nvmem->priv, offset, val, bytes);
+ gpiod_set_value_cansleep(nvmem->wp_gpio, 1);
+ return ret;
+ }
return -EINVAL;
}
@@ -340,6 +347,14 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
kfree(nvmem);
return ERR_PTR(rval);
}
+ if (config->wp_gpio)
+ nvmem->wp_gpio = config->wp_gpio;
+ else
+ nvmem->wp_gpio = gpiod_get_optional(config->dev, "wp",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(nvmem->wp_gpio))
+ return ERR_CAST(nvmem->wp_gpio);
+
kref_init(&nvmem->refcnt);
INIT_LIST_HEAD(&nvmem->cells);
diff --git a/drivers/nvmem/nvmem.h b/drivers/nvmem/nvmem.h
index eb8ed7121fa3..be0d66d75c8a 100644
--- a/drivers/nvmem/nvmem.h
+++ b/drivers/nvmem/nvmem.h
@@ -9,6 +9,7 @@
#include <linux/list.h>
#include <linux/nvmem-consumer.h>
#include <linux/nvmem-provider.h>
+#include <linux/gpio/consumer.h>
struct nvmem_device {
struct module *owner;
@@ -26,6 +27,7 @@ struct nvmem_device {
struct list_head cells;
nvmem_reg_read_t reg_read;
nvmem_reg_write_t reg_write;
+ struct gpio_desc *wp_gpio;
void *priv;
};
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 582ef05ec07e..f834687989f7 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -50,8 +50,8 @@ struct property_entry;
* transmit an arbitrary number of messages without interruption.
* @count must be be less than 64k since msg.len is u16.
*/
-extern int i2c_transfer_buffer_flags(const struct i2c_client *client,
- char *buf, int count, u16 flags);
+int i2c_transfer_buffer_flags(const struct i2c_client *client,
+ char *buf, int count, u16 flags);
/**
* i2c_master_recv - issue a single I2C message in master receive mode
@@ -115,11 +115,9 @@ static inline int i2c_master_send_dmasafe(const struct i2c_client *client,
/* Transfer num messages.
*/
-extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
- int num);
+int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
/* Unlocked flavor */
-extern int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
- int num);
+int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
/* This is the very generalized SMBus access routine. You probably do not
want to use this, though; one of the functions below may be much easier,
@@ -138,16 +136,14 @@ s32 __i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
/* Now follow the 'nice' access routines. These also document the calling
conventions of i2c_smbus_xfer. */
-extern s32 i2c_smbus_read_byte(const struct i2c_client *client);
-extern s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value);
-extern s32 i2c_smbus_read_byte_data(const struct i2c_client *client,
- u8 command);
-extern s32 i2c_smbus_write_byte_data(const struct i2c_client *client,
- u8 command, u8 value);
-extern s32 i2c_smbus_read_word_data(const struct i2c_client *client,
- u8 command);
-extern s32 i2c_smbus_write_word_data(const struct i2c_client *client,
- u8 command, u16 value);
+s32 i2c_smbus_read_byte(const struct i2c_client *client);
+s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value);
+s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command);
+s32 i2c_smbus_write_byte_data(const struct i2c_client *client,
+ u8 command, u8 value);
+s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command);
+s32 i2c_smbus_write_word_data(const struct i2c_client *client,
+ u8 command, u16 value);
static inline s32
i2c_smbus_read_word_swapped(const struct i2c_client *client, u8 command)
@@ -165,19 +161,18 @@ i2c_smbus_write_word_swapped(const struct i2c_client *client,
}
/* Returns the number of read bytes */
-extern s32 i2c_smbus_read_block_data(const struct i2c_client *client,
- u8 command, u8 *values);
-extern s32 i2c_smbus_write_block_data(const struct i2c_client *client,
- u8 command, u8 length, const u8 *values);
+s32 i2c_smbus_read_block_data(const struct i2c_client *client,
+ u8 command, u8 *values);
+s32 i2c_smbus_write_block_data(const struct i2c_client *client,
+ u8 command, u8 length, const u8 *values);
/* Returns the number of read bytes */
-extern s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client,
- u8 command, u8 length, u8 *values);
-extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
- u8 command, u8 length,
- const u8 *values);
-extern s32
-i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
- u8 command, u8 length, u8 *values);
+s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client,
+ u8 command, u8 length, u8 *values);
+s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
+ u8 command, u8 length, const u8 *values);
+s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
+ u8 command, u8 length,
+ u8 *values);
int i2c_get_device_id(const struct i2c_client *client,
struct i2c_device_identity *id);
#endif /* I2C */
@@ -337,10 +332,10 @@ struct i2c_client {
};
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
-extern struct i2c_client *i2c_verify_client(struct device *dev);
-extern struct i2c_adapter *i2c_verify_adapter(struct device *dev);
-extern const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
- const struct i2c_client *client);
+struct i2c_client *i2c_verify_client(struct device *dev);
+struct i2c_adapter *i2c_verify_adapter(struct device *dev);
+const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
+ const struct i2c_client *client);
static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
{
@@ -369,9 +364,9 @@ enum i2c_slave_event {
I2C_SLAVE_STOP,
};
-extern int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb);
-extern int i2c_slave_unregister(struct i2c_client *client);
-extern bool i2c_detect_slave_mode(struct device *dev);
+int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb);
+int i2c_slave_unregister(struct i2c_client *client);
+bool i2c_detect_slave_mode(struct device *dev);
static inline int i2c_slave_event(struct i2c_client *client,
enum i2c_slave_event event, u8 *val)
@@ -440,10 +435,10 @@ struct i2c_board_info {
* with integrated I2C, a config eeprom, sensors, and a codec that's
* used in conjunction with the primary hardware.
*/
-extern struct i2c_client *
+struct i2c_client *
i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info);
-extern struct i2c_client *
+struct i2c_client *
i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info);
/* If you don't know the exact address of an I2C device, use this variant
@@ -452,33 +447,33 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
* it must return 1 on successful probe, 0 otherwise. If it is not provided,
* a default probing method is used.
*/
-extern struct i2c_client *
+struct i2c_client *
i2c_new_scanned_device(struct i2c_adapter *adap,
struct i2c_board_info *info,
unsigned short const *addr_list,
int (*probe)(struct i2c_adapter *adap, unsigned short addr));
-extern struct i2c_client *
+struct i2c_client *
i2c_new_probed_device(struct i2c_adapter *adap,
struct i2c_board_info *info,
unsigned short const *addr_list,
int (*probe)(struct i2c_adapter *adap, unsigned short addr));
/* Common custom probe functions */
-extern int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr);
+int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr);
-extern struct i2c_client *
+struct i2c_client *
i2c_new_dummy_device(struct i2c_adapter *adapter, u16 address);
-extern struct i2c_client *
+struct i2c_client *
devm_i2c_new_dummy_device(struct device *dev, struct i2c_adapter *adap, u16 address);
-extern struct i2c_client *
+struct i2c_client *
i2c_new_ancillary_device(struct i2c_client *client,
- const char *name,
- u16 default_addr);
+ const char *name,
+ u16 default_addr);
-extern void i2c_unregister_device(struct i2c_client *client);
+void i2c_unregister_device(struct i2c_client *client);
#endif /* I2C */
/* Mainboard arch_initcall() code should register all its I2C devices.
@@ -486,7 +481,7 @@ extern void i2c_unregister_device(struct i2c_client *client);
* Modules for add-on boards must use other calls.
*/
#ifdef CONFIG_I2C_BOARDINFO
-extern int
+int
i2c_register_board_info(int busnum, struct i2c_board_info const *info,
unsigned n);
#else
@@ -840,12 +835,12 @@ static inline void i2c_mark_adapter_resumed(struct i2c_adapter *adap)
/* administration...
*/
#if IS_ENABLED(CONFIG_I2C)
-extern int i2c_add_adapter(struct i2c_adapter *adap);
-extern void i2c_del_adapter(struct i2c_adapter *adap);
-extern int i2c_add_numbered_adapter(struct i2c_adapter *adap);
+int i2c_add_adapter(struct i2c_adapter *adap);
+void i2c_del_adapter(struct i2c_adapter *adap);
+int i2c_add_numbered_adapter(struct i2c_adapter *adap);
-extern int i2c_register_driver(struct module *owner, struct i2c_driver *driver);
-extern void i2c_del_driver(struct i2c_driver *driver);
+int i2c_register_driver(struct module *owner, struct i2c_driver *driver);
+void i2c_del_driver(struct i2c_driver *driver);
/* use a define to avoid include chaining to get THIS_MODULE */
#define i2c_add_driver(driver) \
@@ -858,12 +853,12 @@ static inline bool i2c_client_has_driver(struct i2c_client *client)
/* call the i2c_client->command() of all attached clients with
* the given arguments */
-extern void i2c_clients_command(struct i2c_adapter *adap,
- unsigned int cmd, void *arg);
+void i2c_clients_command(struct i2c_adapter *adap,
+ unsigned int cmd, void *arg);
-extern struct i2c_adapter *i2c_get_adapter(int nr);
-extern void i2c_put_adapter(struct i2c_adapter *adap);
-extern unsigned int i2c_adapter_depth(struct i2c_adapter *adapter);
+struct i2c_adapter *i2c_get_adapter(int nr);
+void i2c_put_adapter(struct i2c_adapter *adap);
+unsigned int i2c_adapter_depth(struct i2c_adapter *adapter);
void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults);
@@ -935,15 +930,15 @@ int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr);
#if IS_ENABLED(CONFIG_OF)
/* must call put_device() when done with returned i2c_client device */
-extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
/* must call put_device() when done with returned i2c_adapter device */
-extern struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node);
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node);
/* must call i2c_put_adapter() when done with returned i2c_adapter device */
struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node);
-extern const struct of_device_id
+const struct of_device_id
*i2c_of_match_device(const struct of_device_id *matches,
struct i2c_client *client);
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index fe051323be0a..6d6f8e5d24c9 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -11,6 +11,7 @@
#include <linux/err.h>
#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
struct nvmem_device;
struct nvmem_cell_info;
@@ -45,6 +46,7 @@ enum nvmem_type {
* @word_size: Minimum read/write access granularity.
* @stride: Minimum read/write access stride.
* @priv: User context passed to read/write callbacks.
+ * @wp-gpio: Write protect pin
*
* Note: A default "nvmem<id>" name will be assigned to the device if
* no name is specified in its configuration. In such case "<id>" is
@@ -58,6 +60,7 @@ struct nvmem_config {
const char *name;
int id;
struct module *owner;
+ struct gpio_desc *wp_gpio;
const struct nvmem_cell_info *cells;
int ncells;
enum nvmem_type type;