diff options
3 files changed, 401 insertions, 274 deletions
diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml index 6097e8ac46c1..1b03810d4b4d 100644 --- a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml +++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml @@ -55,7 +55,7 @@ examples: #size-cells = <0>; axp221: pmic@68 { - compatible = "x-powers,axp221"; + /* compatible = "x-powers,axp221"; */ reg = <0x68>; }; }; diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt deleted file mode 100644 index 2b53dcc0ea61..000000000000 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ /dev/null @@ -1,273 +0,0 @@ -AXP family PMIC device tree bindings - -The axp20x family current members : -axp152 (X-Powers) -axp202 (X-Powers) -axp209 (X-Powers) -axp221 (X-Powers) -axp223 (X-Powers) -axp803 (X-Powers) -axp806 (X-Powers) -axp809 (X-Powers) -axp813 (X-Powers) - -The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything -other than the packaging. Pins are routed separately. As such they should -be treated as separate entities. The other half is an AC100 RTC/codec -combo chip. Please see ./ac100.txt for its bindings. - -Required properties: -- compatible: should be one of: - * "x-powers,axp152" - * "x-powers,axp202" - * "x-powers,axp209" - * "x-powers,axp221" - * "x-powers,axp223" - * "x-powers,axp803" - * "x-powers,axp806" - * "x-powers,axp805", "x-powers,axp806" - * "x-powers,axp305", "x-powers,axp805", "x-powers,axp806" - * "x-powers,axp809" - * "x-powers,axp813" -- reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupt-controller: The PMIC has its own internal IRQs -- #interrupt-cells: Should be set to 1 - -Supported common regulator properties, see ../regulator/regulator.txt for -more information: -- regulator-ramp-delay: sets the ramp up delay in uV/us - AXP20x/DCDC2: 1600, 800 - AXP20x/LDO3: 1600, 800 -- regulator-soft-start: enable the output at the lowest possible voltage and - only then set the desired voltage - AXP20x/LDO3: software-based implementation - -Optional properties: -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin -- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz - AXP152/20X: range: 750-1875, Default: 1.5 MHz - AXP22X/8XX: range: 1800-4050, Default: 3 MHz - -- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is - used as an output pin to control an external - regulator to drive the OTG VBus, rather then - as an input pin which signals whether the - board is driving OTG VBus or not. - (axp221 / axp223 / axp803/ axp813 only) - -- x-powers,self-working-mode and - x-powers,master-mode: Boolean (axp806 only). Set either of these when the - PMIC is wired for self-working mode or master mode. - If neither is set then slave mode is assumed. - This corresponds to how the MODESET pin is wired. - -- <input>-supply: a phandle to the regulator supply node. May be omitted if - inputs are unregulated, such as using the IPSOUT output - from the PMIC. - -- regulators: A node that houses a sub-node for each regulator. Regulators - not used but preferred to be managed by the OS should be - listed as well. - See Documentation/devicetree/bindings/regulator/regulator.txt - for more information on standard regulator bindings. - -Optional properties for DCDC regulators: -- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode - Default: Current hardware setting - The DCDC regulators work in a mixed PWM/PFM mode, - using PFM under light loads and switching to PWM - for heavier loads. Forcing PWM mode trades efficiency - under light loads for lower output noise. This - probably makes sense for HiFi audio related - applications that aren't battery constrained. - -AXP202/AXP209 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -LDO1 : LDO : acin-supply : always on -LDO2 : LDO : ldo24in-supply : shared supply -LDO3 : LDO : ldo3in-supply -LDO4 : LDO : ldo24in-supply : shared supply -LDO5 : LDO : ldo5in-supply - -AXP221/AXP223 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : : DCDC1 secondary output -DC5LDO : LDO : : input from DCDC5 -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -AXP803 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply : poly-phase capable -DCDC3 : DC-DC buck : vin3-supply : poly-phase capable -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply : poly-phase capable -DCDC6 : DC-DC buck : vin6-supply : poly-phase capable -DC1SW : On/Off Switch : : DCDC1 secondary output -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -FLDO1 : LDO : fldoin-supply : shared supply -FLDO2 : LDO : fldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -AXP806 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDCA : DC-DC buck : vina-supply : poly-phase capable -DCDCB : DC-DC buck : vinb-supply : poly-phase capable -DCDCC : DC-DC buck : vinc-supply : poly-phase capable -DCDCD : DC-DC buck : vind-supply : poly-phase capable -DCDCE : DC-DC buck : vine-supply : poly-phase capable -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -BLDO1 : LDO : bldoin-supply : shared supply -BLDO2 : LDO : bldoin-supply : shared supply -BLDO3 : LDO : bldoin-supply : shared supply -BLDO4 : LDO : bldoin-supply : shared supply -CLDO1 : LDO : cldoin-supply : shared supply -CLDO2 : LDO : cldoin-supply : shared supply -CLDO3 : LDO : cldoin-supply : shared supply -SW : On/Off Switch : swin-supply - -Additionally, the AXP806 DC-DC regulators support poly-phase arrangements -for higher output current. The possible groupings are: A+B, A+B+C, D+E. - -AXP809 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : : DCDC1 secondary output -DC5LDO : LDO : : input from DCDC5 -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -SW : On/Off Switch : swin-supply - -AXP813 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply : poly-phase capable -DCDC3 : DC-DC buck : vin3-supply : poly-phase capable -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply : poly-phase capable -DCDC6 : DC-DC buck : vin6-supply : poly-phase capable -DCDC7 : DC-DC buck : vin7-supply -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -FLDO1 : LDO : fldoin-supply : shared supply -FLDO2 : LDO : fldoin-supply : shared supply -FLDO3 : LDO : fldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -SW : On/Off Switch : swin-supply -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -Example: - -axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - x-powers,dcdc-freq = <1500>; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; - }; - - vdd_int_dll: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; - }; - - vdd_rtc: ldo1 { - regulator-always-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-rtc"; - }; - - avcc: ldo2 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; - }; - - ldo3 { - /* unused but preferred to be managed by OS */ - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml new file mode 100644 index 000000000000..3a53bae611bc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -0,0 +1,400 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: X-Powers AXP PMIC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + +allOf: + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 750 + maximum: 1875 + default: 1500 + + else: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 1800 + maximum: 4050 + default: 3000 + + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + not: + required: + - x-powers,drive-vbus-en + + - if: + not: + properties: + compatible: + contains: + const: x-powers,axp806 + + then: + allOf: + - not: + required: + - x-powers,self-working-mode + + - not: + required: + - x-powers,master-mode + + - if: + not: + properties: + compatible: + contains: + const: x-powers,axp305 + + then: + required: + - interrupts + +properties: + compatible: + oneOf: + - enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + - x-powers,axp221 + - x-powers,axp223 + - x-powers,axp803 + - x-powers,axp806 + - x-powers,axp809 + - x-powers,axp813 + - items: + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp305 + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp818 + - const: x-powers,axp813 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + x-powers,drive-vbus-en: + type: boolean + description: > + Set this when the N_VBUSEN pin is used as an output pin to control an + external regulator to drive the OTG VBus, rather then as an input pin + which signals whether the board is driving OTG VBus or not. + + x-powers,self-working-mode: + type: boolean + description: > + Set this when the PMIC is wired for self-working mode through the MODESET + pin. + + x-powers,master-mode: + type: boolean + description: > + Set this when the PMIC is wired for master mode through the MODESET pin. + + vin1-supply: + description: > + DCDC1 power supply node, if present. + + vin2-supply: + description: > + DCDC2 power supply node, if present. + + vin3-supply: + description: > + DCDC3 power supply node, if present. + + vin4-supply: + description: > + DCDC4 power supply node, if present. + + vin5-supply: + description: > + DCDC5 power supply node, if present. + + vin6-supply: + description: > + DCDC6 power supply node, if present. + + vin7-supply: + description: > + DCDC7 power supply node, if present. + + vina-supply: + description: > + DCDCA power supply node, if present. + + vinb-supply: + description: > + DCDCB power supply node, if present. + + vinc-supply: + description: > + DCDCC power supply node, if present. + + vind-supply: + description: > + DCDCD power supply node, if present. + + vine-supply: + description: > + DCDCE power supply node, if present. + + acin-supply: + description: > + LDO1 power supply node, if present. + + ldo24in-supply: + description: > + LDO2 and LDO4 power supply node, if present. + + ldo3in-supply: + description: > + LDO3 power supply node, if present. + + ldo5in-supply: + description: > + LDO5 power supply node, if present. + + aldoin-supply: + description: > + ALDO* power supply node, if present. + + bldoin-supply: + description: > + BLDO* power supply node, if present. + + cldoin-supply: + description: > + CLDO* power supply node, if present. + + dldoin-supply: + description: > + DLDO* power supply node, if present. + + eldoin-supply: + description: > + ELDO* power supply node, if present. + + fldoin-supply: + description: > + FLDO* power supply node, if present. + + ips-supply: + description: > + LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present. + + drivevbus-supply: + description: > + DRIVEVBUS power supply node, if present. + + swin-supply: + description: > + SW power supply node, if present. + + adc: + $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml# + + gpio: + $ref: /schemas/gpio/x-powers,axp209-gpio.yaml# + + ac-power: + $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml# + + battery-power: + $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml# + + usb-power: + $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml# + + regulators: + type: object + + properties: + x-powers,dcdc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Defines the work frequency of DC-DC in kHz. + + patternProperties: + "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + + properties: + regulator-ramp-delay: + description: > + Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on + the AXP209. + + regulator-soft-start: + description: > + Only valid for the LDO3 regulator. + + x-powers,dcdc-workmode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: > + Only valid for DCDC regulators. Setup 1 for PWM mode, 0 + for AUTO (PWM/PFM) mode. The DCDC regulators work in a + mixed PWM/PFM mode, using PFM under light loads and + switching to PWM for heavier loads. Forcing PWM mode + trades efficiency under light loads for lower output + noise. This probably makes sense for HiFi audio related + applications that aren't battery constrained. + + additionalProperties: false + +required: + - compatible + - reg + - "#interrupt-cells" + - interrupt-controller + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + ac_power_supply: ac-power { + compatible = "x-powers,axp202-ac-power-supply"; + }; + + axp_adc: adc { + compatible = "x-powers,axp209-adc"; + #io-channel-cells = <1>; + }; + + axp_gpio: gpio { + compatible = "x-powers,axp209-gpio"; + gpio-controller; + #gpio-cells = <2>; + + gpio0-adc-pin { + pins = "GPIO0"; + function = "adc"; + }; + }; + + battery_power_supply: battery-power { + compatible = "x-powers,axp209-battery-power-supply"; + }; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; + }; + + reg_ldo2: ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; + + usb_power_supply: usb-power { + compatible = "x-powers,axp202-usb-power-supply"; + }; + }; + }; |