summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.gitignore1
-rw-r--r--Documentation/kbuild/makefiles.txt39
-rw-r--r--Makefile12
-rw-r--r--arch/ia64/Makefile2
-rw-r--r--lib/Kconfig.debug24
-rw-r--r--scripts/Kbuild.include14
-rw-r--r--scripts/Makefile.clean4
-rw-r--r--scripts/Makefile.extrawarn21
-rw-r--r--scripts/Makefile.host61
9 files changed, 75 insertions, 103 deletions
diff --git a/.gitignore b/.gitignore
index f4c0b091dcf4..e213b27f3921 100644
--- a/.gitignore
+++ b/.gitignore
@@ -34,6 +34,7 @@
*.gcno
modules.builtin
Module.symvers
+*.dwo
#
# Top-level generic files
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index c600e2f44a62..764f5991a3fc 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -23,11 +23,10 @@ This document describes the Linux kernel Makefiles.
=== 4 Host Program support
--- 4.1 Simple Host Program
--- 4.2 Composite Host Programs
- --- 4.3 Defining shared libraries
- --- 4.4 Using C++ for host programs
- --- 4.5 Controlling compiler options for host programs
- --- 4.6 When host programs are actually built
- --- 4.7 Using hostprogs-$(CONFIG_FOO)
+ --- 4.3 Using C++ for host programs
+ --- 4.4 Controlling compiler options for host programs
+ --- 4.5 When host programs are actually built
+ --- 4.6 Using hostprogs-$(CONFIG_FOO)
=== 5 Kbuild clean infrastructure
@@ -643,29 +642,7 @@ Both possibilities are described in the following.
Finally, the two .o files are linked to the executable, lxdialog.
Note: The syntax <executable>-y is not permitted for host-programs.
---- 4.3 Defining shared libraries
-
- Objects with extension .so are considered shared libraries, and
- will be compiled as position independent objects.
- Kbuild provides support for shared libraries, but the usage
- shall be restricted.
- In the following example the libkconfig.so shared library is used
- to link the executable conf.
-
- Example:
- #scripts/kconfig/Makefile
- hostprogs-y := conf
- conf-objs := conf.o libkconfig.so
- libkconfig-objs := expr.o type.o
-
- Shared libraries always require a corresponding -objs line, and
- in the example above the shared library libkconfig is composed by
- the two objects expr.o and type.o.
- expr.o and type.o will be built as position independent code and
- linked as a shared library libkconfig.so. C++ is not supported for
- shared libraries.
-
---- 4.4 Using C++ for host programs
+--- 4.3 Using C++ for host programs
kbuild offers support for host programs written in C++. This was
introduced solely to support kconfig, and is not recommended
@@ -688,7 +665,7 @@ Both possibilities are described in the following.
qconf-cxxobjs := qconf.o
qconf-objs := check.o
---- 4.5 Controlling compiler options for host programs
+--- 4.4 Controlling compiler options for host programs
When compiling host programs, it is possible to set specific flags.
The programs will always be compiled utilising $(HOSTCC) passed
@@ -716,7 +693,7 @@ Both possibilities are described in the following.
When linking qconf, it will be passed the extra option
"-L$(QTDIR)/lib".
---- 4.6 When host programs are actually built
+--- 4.5 When host programs are actually built
Kbuild will only build host-programs when they are referenced
as a prerequisite.
@@ -747,7 +724,7 @@ Both possibilities are described in the following.
This will tell kbuild to build lxdialog even if not referenced in
any rule.
---- 4.7 Using hostprogs-$(CONFIG_FOO)
+--- 4.6 Using hostprogs-$(CONFIG_FOO)
A typical pattern in a Kbuild file looks like this:
diff --git a/Makefile b/Makefile
index a897c50db515..ada00f0d2a11 100644
--- a/Makefile
+++ b/Makefile
@@ -372,6 +372,7 @@ GENKSYMS = scripts/genksyms/genksyms
INSTALLKERNEL := installkernel
DEPMOD = /sbin/depmod
PERL = perl
+PYTHON = python
CHECK = sparse
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
@@ -422,7 +423,7 @@ KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(S
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
export CPP AR NM STRIP OBJCOPY OBJDUMP
-export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
@@ -687,6 +688,7 @@ KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
# source of a reference will be _MergedGlobals and not on of the whitelisted names.
# See modpost pattern 2
KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
+KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
else
# This warning generated too much noise in a regular build.
@@ -710,9 +712,16 @@ endif
KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments)
ifdef CONFIG_DEBUG_INFO
+ifdef CONFIG_DEBUG_INFO_SPLIT
+KBUILD_CFLAGS += $(call cc-option, -gsplit-dwarf, -g)
+else
KBUILD_CFLAGS += -g
+endif
KBUILD_AFLAGS += -Wa,-gdwarf-2
endif
+ifdef CONFIG_DEBUG_INFO_DWARF4
+KBUILD_CFLAGS += $(call cc-option, -gdwarf-4,)
+endif
ifdef CONFIG_DEBUG_INFO_REDUCED
KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \
@@ -1398,6 +1407,7 @@ clean: $(clean-dirs)
@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '*.ko.*' \
+ -o -name '*.dwo' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index f37238f45bcd..5441b14994fc 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -76,7 +76,7 @@ vmlinux.gz: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
unwcheck: vmlinux
- -$(Q)READELF=$(READELF) python $(srctree)/arch/ia64/scripts/unwcheck.py $<
+ -$(Q)READELF=$(READELF) $(PYTHON) $(srctree)/arch/ia64/scripts/unwcheck.py $<
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index cb45f59685e6..07c28323f88f 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -143,6 +143,30 @@ config DEBUG_INFO_REDUCED
DEBUG_INFO build and compile times are reduced too.
Only works with newer gcc versions.
+config DEBUG_INFO_SPLIT
+ bool "Produce split debuginfo in .dwo files"
+ depends on DEBUG_INFO
+ help
+ Generate debug info into separate .dwo files. This significantly
+ reduces the build directory size for builds with DEBUG_INFO,
+ because it stores the information only once on disk in .dwo
+ files instead of multiple times in object files and executables.
+ In addition the debug information is also compressed.
+
+ Requires recent gcc (4.7+) and recent gdb/binutils.
+ Any tool that packages or reads debug information would need
+ to know about the .dwo files and include them.
+ Incompatible with older versions of ccache.
+
+config DEBUG_INFO_DWARF4
+ bool "Generate dwarf4 debuginfo"
+ depends on DEBUG_INFO
+ help
+ Generate dwarf4 debug info. This requires recent versions
+ of gcc and gdb. It makes the debug information larger.
+ But it significantly improves the success of resolving
+ variables in gdb on optimized code.
+
config ENABLE_WARN_DEPRECATED
bool "Enable __deprecated logic"
default y
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 122f95c95869..8a9a4e1c7eab 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -215,11 +215,13 @@ else
arg-check = $(if $(strip $(cmd_$@)),,1)
endif
-# >'< substitution is for echo to work,
-# >$< substitution to preserve $ when reloading .cmd file
-# note: when using inline perl scripts [perl -e '...$$t=1;...']
-# in $(cmd_xxx) double $$ your perl vars
-make-cmd = $(subst \\,\\\\,$(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1))))))
+# Replace >$< with >$$< to preserve $ when reloading the .cmd file
+# (needed for make)
+# Replace >#< with >\#< to avoid starting a comment in the .cmd file
+# (needed for make)
+# Replace >'< with >'\''< to be able to enclose the whole string in '...'
+# (needed for the shell)
+make-cmd = $(call escsq,$(subst \#,\\\#,$(subst $$,$$$$,$(cmd_$(1)))))
# Find any prerequisites that is newer than target or that does not exist.
# PHONY targets skipped in both cases.
@@ -230,7 +232,7 @@ any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
- echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
# Execute the command and also postprocess generated .d dependencies file.
if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \
diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean
index 686cb0d31c7c..a651cee84f2a 100644
--- a/scripts/Makefile.clean
+++ b/scripts/Makefile.clean
@@ -40,8 +40,8 @@ subdir-ymn := $(addprefix $(obj)/,$(subdir-ymn))
# build a list of files to remove, usually relative to the current
# directory
-__clean-files := $(extra-y) $(always) \
- $(targets) $(clean-files) \
+__clean-files := $(extra-y) $(extra-m) $(extra-) \
+ $(always) $(targets) $(clean-files) \
$(host-progs) \
$(hostprogs-y) $(hostprogs-m) $(hostprogs-)
diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn
index 65643506c71c..f734033af219 100644
--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -26,16 +26,6 @@ warning-1 += $(call cc-option, -Wmissing-include-dirs)
warning-1 += $(call cc-option, -Wunused-but-set-variable)
warning-1 += $(call cc-disable-warning, missing-field-initializers)
-# Clang
-warning-1 += $(call cc-disable-warning, initializer-overrides)
-warning-1 += $(call cc-disable-warning, unused-value)
-warning-1 += $(call cc-disable-warning, format)
-warning-1 += $(call cc-disable-warning, unknown-warning-option)
-warning-1 += $(call cc-disable-warning, sign-compare)
-warning-1 += $(call cc-disable-warning, format-zero-length)
-warning-1 += $(call cc-disable-warning, uninitialized)
-warning-1 += $(call cc-option, -fcatch-undefined-behavior)
-
warning-2 := -Waggregate-return
warning-2 += -Wcast-align
warning-2 += -Wdisabled-optimization
@@ -64,4 +54,15 @@ ifeq ("$(strip $(warning))","")
endif
KBUILD_CFLAGS += $(warning)
+else
+
+ifeq ($(COMPILER),clang)
+KBUILD_CFLAGS += $(call cc-disable-warning, initializer-overrides)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-value)
+KBUILD_CFLAGS += $(call cc-disable-warning, format)
+KBUILD_CFLAGS += $(call cc-disable-warning, unknown-warning-option)
+KBUILD_CFLAGS += $(call cc-disable-warning, sign-compare)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-zero-length)
+KBUILD_CFLAGS += $(call cc-disable-warning, uninitialized)
+endif
endif
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 66893643fd7d..ab5980f91714 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -20,21 +20,12 @@
# Will compile qconf as a C++ program, and menu as a C program.
# They are linked as C++ code to the executable qconf
-# hostprogs-y := conf
-# conf-objs := conf.o libkconfig.so
-# libkconfig-objs := expr.o type.o
-# Will create a shared library named libkconfig.so that consists of
-# expr.o and type.o (they are both compiled as C code and the object files
-# are made as position independent code).
-# conf.c is compiled as a C program, and conf.o is linked together with
-# libkconfig.so as the executable conf.
-# Note: Shared libraries consisting of C++ files are not supported
-
__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
# C code
# Executables compiled from a single .c file
-host-csingle := $(foreach m,$(__hostprogs),$(if $($(m)-objs),,$(m)))
+host-csingle := $(foreach m,$(__hostprogs), \
+ $(if $($(m)-objs)$($(m)-cxxobjs),,$(m)))
# C executables linked based on several .o files
host-cmulti := $(foreach m,$(__hostprogs),\
@@ -44,33 +35,17 @@ host-cmulti := $(foreach m,$(__hostprogs),\
host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
# C++ code
-# C++ executables compiled from at least on .cc file
+# C++ executables compiled from at least one .cc file
# and zero or more .c files
host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
# C++ Object (.o) files compiled from .cc files
host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
-# Shared libaries (only .c supported)
-# Shared libraries (.so) - all .so files referenced in "xxx-objs"
-host-cshlib := $(sort $(filter %.so, $(host-cobjs)))
-# Remove .so files from "xxx-objs"
-host-cobjs := $(filter-out %.so,$(host-cobjs))
-
-#Object (.o) files used by the shared libaries
-host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
-
# output directory for programs/.o files
-# hostprogs-y := tools/build may have been specified. Retrieve directory
-host-objdirs := $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f))))
-# directory of .o files from prog-objs notation
-host-objdirs += $(foreach f,$(host-cmulti), \
- $(foreach m,$($(f)-objs), \
- $(if $(dir $(m)),$(dir $(m)))))
-# directory of .o files from prog-cxxobjs notation
-host-objdirs += $(foreach f,$(host-cxxmulti), \
- $(foreach m,$($(f)-cxxobjs), \
- $(if $(dir $(m)),$(dir $(m)))))
+# hostprogs-y := tools/build may have been specified.
+# Retrieve also directory of .o files from prog-objs or prog-cxxobjs notation
+host-objdirs := $(dir $(__hostprogs) $(host-cobjs) $(host-cxxobjs))
host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs))))
@@ -81,8 +56,6 @@ host-cmulti := $(addprefix $(obj)/,$(host-cmulti))
host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti))
host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
-host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
-host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
host-objdirs := $(addprefix $(obj)/,$(host-objdirs))
obj-dirs += $(host-objdirs)
@@ -123,7 +96,7 @@ quiet_cmd_host-cmulti = HOSTLD $@
cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
$(addprefix $(obj)/,$($(@F)-objs)) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cmulti): $(obj)/%: $(host-cobjs) $(host-cshlib) FORCE
+$(host-cmulti): $(obj)/%: $(host-cobjs) FORCE
$(call if_changed,host-cmulti)
# Create .o file from a single .c file
@@ -140,7 +113,7 @@ quiet_cmd_host-cxxmulti = HOSTLD $@
$(foreach o,objs cxxobjs,\
$(addprefix $(obj)/,$($(@F)-$(o)))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE
+$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) FORCE
$(call if_changed,host-cxxmulti)
# Create .o file from a single .cc (C++) file
@@ -149,21 +122,5 @@ quiet_cmd_host-cxxobjs = HOSTCXX $@
$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
$(call if_changed_dep,host-cxxobjs)
-# Compile .c file, create position independent .o file
-# host-cshobjs -> .o
-quiet_cmd_host-cshobjs = HOSTCC -fPIC $@
- cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
-$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
- $(call if_changed_dep,host-cshobjs)
-
-# Link a shared library, based on position independent .o files
-# *.o -> .so shared library (host-cshlib)
-quiet_cmd_host-cshlib = HOSTLLD -shared $@
- cmd_host-cshlib = $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \
- $(addprefix $(obj)/,$($(@F:.so=-objs))) \
- $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE
- $(call if_changed,host-cshlib)
-
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
- $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
+ $(host-cxxmulti) $(host-cxxobjs)