diff options
26 files changed, 213 insertions, 144 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index 0c065f77658f..3957d4edaa74 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -7,18 +7,18 @@ Required properties : - compatible : Should be "microchip,usb251xb" or one of the specific types: "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi" - - hub-reset-gpios : Should specify the gpio for hub reset + - reset-gpios : Should specify the gpio for hub reset + - reg : I2C address on the selected bus (default is <0x2C>) Optional properties : - - reg : I2C address on the selected bus (default is <0x2C>) - skip-config : Skip Hub configuration, but only send the USB-Attach command - - vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424) - - product-id : USB Product ID of the hub (16 bit, default depends on type) - - device-id : USB Device ID of the hub (16 bit, default is 0x0bb3) - - language-id : USB Language ID (16 bit, default is 0x0000) - - manufacturer : USB Manufacturer string (max 31 characters long) - - product : USB Product string (max 31 characters long) - - serial : USB Serial string (max 31 characters long) + - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) + - product-id : Set USB Product ID of the hub (16 bit, default depends on type) + - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3) + - language-id : Set USB Language ID (16 bit, default is 0x0000) + - manufacturer : Set USB Manufacturer string (max 31 characters long) + - product : Set USB Product string (max 31 characters long) + - serial : Set USB Serial string (max 31 characters long) - {bus,self}-powered : selects between self- and bus-powered operation (default is self-powered) - disable-hi-speed : disable USB Hi-Speed support @@ -31,8 +31,10 @@ Optional properties : (default is individual) - dynamic-power-switching : enable auto-switching from self- to bus-powered operation if the local power source is removed or unavailable - - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms) - - compound-device : indicated the hub is part of a compound device + - oc-delay-us : Delay time (in microseconds) for filtering the over-current + sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If + an invalid value is given, the default is used instead. + - compound-device : indicate the hub is part of a compound device - port-mapping-mode : enable port mapping mode - string-support : enable string descriptor support (required for manufacturer, product and serial string configuration) @@ -40,34 +42,15 @@ Optional properties : device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - max-sp-power : Specifies the maximum current the hub consumes from an - upstream port when operating as self-powered hub including the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 2). - - max-bp-power : Specifies the maximum current the hub consumes from an - upstream port when operating as bus-powered hub including the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 100). - - max-sp-current : Specifies the maximum current the hub consumes from an - upstream port when operating as self-powered hub EXCLUDING the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 2). - - max-bp-current : Specifies the maximum current the hub consumes from an - upstream port when operating as bus-powered hub EXCLUDING the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 100). - - power-on-time : Specifies the time it takes from the time the host initiates - the power-on sequence to a port until the port has adequate power. The - value is given in ms in a 0 - 510 range (default is 100ms). + - power-on-time-ms : Specifies the time it takes from the time the host + initiates the power-on sequence to a port until the port has adequate + power. The value is given in ms in a 0 - 510 range (default is 100ms). Examples: usb2512b@2c { compatible = "microchip,usb2512b"; - hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + reg = <0x2c>; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; usb2514b@2c { diff --git a/MAINTAINERS b/MAINTAINERS index c265a5fe4848..c776906f67a9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8307,7 +8307,6 @@ M: Richard Leitner <richard.leitner@skidata.com> L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/misc/usb251xb.c -F: include/linux/platform_data/usb251xb.h F: Documentation/devicetree/bindings/usb/usb251xb.txt MICROSOFT SURFACE PRO 3 BUTTON DRIVER diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 2092e46b1380..f8d0747810e7 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -250,6 +250,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, val = dwc3_omap_read_utmi_ctrl(omap); val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG; dwc3_omap_write_utmi_ctrl(omap, val); + break; case OMAP_DWC3_VBUS_OFF: val = dwc3_omap_read_utmi_ctrl(omap); @@ -392,7 +393,7 @@ static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap) { u32 reg; struct device_node *node = omap->dev->of_node; - int utmi_mode = 0; + u32 utmi_mode = 0; reg = dwc3_omap_read_utmi_ctrl(omap); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4db97ecae885..0d75158e43fe 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1342,6 +1342,68 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, if (r == req) { /* wait until it is processed */ dwc3_stop_active_transfer(dwc, dep->number, true); + + /* + * If request was already started, this means we had to + * stop the transfer. With that we also need to ignore + * all TRBs used by the request, however TRBs can only + * be modified after completion of END_TRANSFER + * command. So what we do here is that we wait for + * END_TRANSFER completion and only after that, we jump + * over TRBs by clearing HWO and incrementing dequeue + * pointer. + * + * Note that we have 2 possible types of transfers here: + * + * i) Linear buffer request + * ii) SG-list based request + * + * SG-list based requests will have r->num_pending_sgs + * set to a valid number (> 0). Linear requests, + * normally use a single TRB. + * + * For each of these two cases, if r->unaligned flag is + * set, one extra TRB has been used to align transfer + * size to wMaxPacketSize. + * + * All of these cases need to be taken into + * consideration so we don't mess up our TRB ring + * pointers. + */ + wait_event_lock_irq(dep->wait_end_transfer, + !(dep->flags & DWC3_EP_END_TRANSFER_PENDING), + dwc->lock); + + if (!r->trb) + goto out1; + + if (r->num_pending_sgs) { + struct dwc3_trb *trb; + int i = 0; + + for (i = 0; i < r->num_pending_sgs; i++) { + trb = r->trb + i; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } + + if (r->unaligned) { + trb = r->trb + r->num_pending_sgs + 1; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } + } else { + struct dwc3_trb *trb = r->trb; + + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + + if (r->unaligned) { + trb = r->trb + 1; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } + } goto out1; } dev_err(dwc->dev, "request %p was not queued to %s\n", @@ -1352,6 +1414,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, out1: /* giveback the request */ + dep->queued_requests--; dwc3_gadget_giveback(dep, req, -ECONNRESET); out0: @@ -2126,12 +2189,12 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, return 1; } - if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) - return 1; - count = trb->size & DWC3_TRB_SIZE_MASK; req->remaining += count; + if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) + return 1; + if (dep->direction) { if (count) { trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size); @@ -3228,15 +3291,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc) int dwc3_gadget_suspend(struct dwc3 *dwc) { - int ret; - if (!dwc->gadget_driver) return 0; - ret = dwc3_gadget_run_stop(dwc, false, false); - if (ret < 0) - return ret; - + dwc3_gadget_run_stop(dwc, false, false); dwc3_disconnect_gadget(dwc); __dwc3_gadget_stop(dwc); diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 3129bcf74d7d..265e223ab645 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -28,23 +28,23 @@ struct dwc3; #define gadget_to_dwc(g) (container_of(g, struct dwc3, gadget)) /* DEPCFG parameter 1 */ -#define DWC3_DEPCFG_INT_NUM(n) ((n) << 0) +#define DWC3_DEPCFG_INT_NUM(n) (((n) & 0x1f) << 0) #define DWC3_DEPCFG_XFER_COMPLETE_EN (1 << 8) #define DWC3_DEPCFG_XFER_IN_PROGRESS_EN (1 << 9) #define DWC3_DEPCFG_XFER_NOT_READY_EN (1 << 10) #define DWC3_DEPCFG_FIFO_ERROR_EN (1 << 11) #define DWC3_DEPCFG_STREAM_EVENT_EN (1 << 13) -#define DWC3_DEPCFG_BINTERVAL_M1(n) ((n) << 16) +#define DWC3_DEPCFG_BINTERVAL_M1(n) (((n) & 0xff) << 16) #define DWC3_DEPCFG_STREAM_CAPABLE (1 << 24) -#define DWC3_DEPCFG_EP_NUMBER(n) ((n) << 25) +#define DWC3_DEPCFG_EP_NUMBER(n) (((n) & 0x1f) << 25) #define DWC3_DEPCFG_BULK_BASED (1 << 30) #define DWC3_DEPCFG_FIFO_BASED (1 << 31) /* DEPCFG parameter 0 */ -#define DWC3_DEPCFG_EP_TYPE(n) ((n) << 1) -#define DWC3_DEPCFG_MAX_PACKET_SIZE(n) ((n) << 3) -#define DWC3_DEPCFG_FIFO_NUMBER(n) ((n) << 17) -#define DWC3_DEPCFG_BURST_SIZE(n) ((n) << 22) +#define DWC3_DEPCFG_EP_TYPE(n) (((n) & 0x3) << 1) +#define DWC3_DEPCFG_MAX_PACKET_SIZE(n) (((n) & 0x7ff) << 3) +#define DWC3_DEPCFG_FIFO_NUMBER(n) (((n) & 0x1f) << 17) +#define DWC3_DEPCFG_BURST_SIZE(n) (((n) & 0xf) << 22) #define DWC3_DEPCFG_DATA_SEQ_NUM(n) ((n) << 26) /* This applies for core versions earlier than 1.94a */ #define DWC3_DEPCFG_IGN_SEQ_NUM (1 << 31) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 78c44979dde3..cbff3b02840d 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -269,6 +269,7 @@ static ssize_t gadget_dev_desc_UDC_store(struct config_item *item, ret = unregister_gadget(gi); if (ret) goto err; + kfree(name); } else { if (gi->composite.gadget_driver.udc_name) { ret = -EBUSY; diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index a5b7cd615698..a0085571824d 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1834,11 +1834,14 @@ static int ffs_func_eps_enable(struct ffs_function *func) spin_lock_irqsave(&func->ffs->eps_lock, flags); while(count--) { struct usb_endpoint_descriptor *ds; + struct usb_ss_ep_comp_descriptor *comp_desc = NULL; + int needs_comp_desc = false; int desc_idx; - if (ffs->gadget->speed == USB_SPEED_SUPER) + if (ffs->gadget->speed == USB_SPEED_SUPER) { desc_idx = 2; - else if (ffs->gadget->speed == USB_SPEED_HIGH) + needs_comp_desc = true; + } else if (ffs->gadget->speed == USB_SPEED_HIGH) desc_idx = 1; else desc_idx = 0; @@ -1855,6 +1858,14 @@ static int ffs_func_eps_enable(struct ffs_function *func) ep->ep->driver_data = ep; ep->ep->desc = ds; + + comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + + USB_DT_ENDPOINT_SIZE); + ep->ep->maxburst = comp_desc->bMaxBurst + 1; + + if (needs_comp_desc) + ep->ep->comp_desc = comp_desc; + ret = usb_ep_enable(ep->ep); if (likely(!ret)) { epfile->ep = ep; @@ -2253,7 +2264,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, if (len < sizeof(*d) || d->bFirstInterfaceNumber >= ffs->interfaces_count || - d->Reserved1) + !d->Reserved1) return -EINVAL; for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i) if (d->Reserved2[i]) diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index 27ed51b5082f..29b41b5dee04 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -258,13 +258,6 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req)); v4l2_event_queue(&uvc->vdev, &v4l2_event); - /* Pass additional setup data to userspace */ - if (uvc->event_setup_out && uvc->event_length) { - uvc->control_req->length = uvc->event_length; - return usb_ep_queue(uvc->func.config->cdev->gadget->ep0, - uvc->control_req, GFP_ATOMIC); - } - return 0; } diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 79a2d8fba6b6..a2c916869293 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -1781,8 +1781,10 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) spin_lock_irq (&dev->lock); value = -EINVAL; - if (dev->buf) + if (dev->buf) { + kfree(kbuf); goto fail; + } dev->buf = kbuf; /* full or low speed config */ diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 11bbce28bc23..2035906b8ced 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -610,7 +610,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { struct usba_ep *ep = to_usba_ep(_ep); struct usba_udc *udc = ep->udc; - unsigned long flags, ept_cfg, maxpacket; + unsigned long flags, maxpacket; unsigned int nr_trans; DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc); @@ -630,7 +630,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) ep->is_in = 0; DBG(DBG_ERR, "%s: EPT_CFG = 0x%lx (maxpacket = %lu)\n", - ep->ep.name, ept_cfg, maxpacket); + ep->ep.name, ep->ept_cfg, maxpacket); if (usb_endpoint_dir_in(desc)) { ep->is_in = 1; diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index c60abe3a68f9..8cabc5944d5f 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -1031,6 +1031,8 @@ static int dummy_udc_probe(struct platform_device *pdev) int rc; dum = *((void **)dev_get_platdata(&pdev->dev)); + /* Clear usb_gadget region for new registration to udc-core */ + memzero_explicit(&dum->gadget, sizeof(struct usb_gadget)); dum->gadget.name = gadget_name; dum->gadget.ops = &dummy_ops; dum->gadget.max_speed = USB_SPEED_SUPER; diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index 85504419ab31..3828c2ec8623 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -1146,15 +1146,15 @@ static int scan_dma_completions(struct net2280_ep *ep) */ while (!list_empty(&ep->queue)) { struct net2280_request *req; - u32 tmp; + u32 req_dma_count; req = list_entry(ep->queue.next, struct net2280_request, queue); if (!req->valid) break; rmb(); - tmp = le32_to_cpup(&req->td->dmacount); - if ((tmp & BIT(VALID_BIT)) != 0) + req_dma_count = le32_to_cpup(&req->td->dmacount); + if ((req_dma_count & BIT(VALID_BIT)) != 0) break; /* SHORT_PACKET_TRANSFERRED_INTERRUPT handles "usb-short" @@ -1163,40 +1163,41 @@ static int scan_dma_completions(struct net2280_ep *ep) */ if (unlikely(req->td->dmadesc == 0)) { /* paranoia */ - tmp = readl(&ep->dma->dmacount); - if (tmp & DMA_BYTE_COUNT_MASK) + u32 const ep_dmacount = readl(&ep->dma->dmacount); + + if (ep_dmacount & DMA_BYTE_COUNT_MASK) break; /* single transfer mode */ - dma_done(ep, req, tmp, 0); + dma_done(ep, req, req_dma_count, 0); num_completed++; break; } else if (!ep->is_in && (req->req.length % ep->ep.maxpacket) && !(ep->dev->quirks & PLX_PCIE)) { - tmp = readl(&ep->regs->ep_stat); + u32 const ep_stat = readl(&ep->regs->ep_stat); /* AVOID TROUBLE HERE by not issuing short reads from * your gadget driver. That helps avoids errata 0121, * 0122, and 0124; not all cases trigger the warning. */ - if ((tmp & BIT(NAK_OUT_PACKETS)) == 0) { + if ((ep_stat & BIT(NAK_OUT_PACKETS)) == 0) { ep_warn(ep->dev, "%s lost packet sync!\n", ep->ep.name); req->req.status = -EOVERFLOW; } else { - tmp = readl(&ep->regs->ep_avail); - if (tmp) { + u32 const ep_avail = readl(&ep->regs->ep_avail); + if (ep_avail) { /* fifo gets flushed later */ ep->out_overflow = 1; ep_dbg(ep->dev, "%s dma, discard %d len %d\n", - ep->ep.name, tmp, + ep->ep.name, ep_avail, req->req.length); req->req.status = -EOVERFLOW; } } } - dma_done(ep, req, tmp, 0); + dma_done(ep, req, req_dma_count, 0); num_completed++; } diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index e1335ad5bce9..832c4fdbe985 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -2534,9 +2534,10 @@ static int pxa_udc_remove(struct platform_device *_dev) usb_del_gadget_udc(&udc->gadget); pxa_cleanup_debugfs(udc); - if (!IS_ERR_OR_NULL(udc->transceiver)) + if (!IS_ERR_OR_NULL(udc->transceiver)) { usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy); - usb_put_phy(udc->transceiver); + usb_put_phy(udc->transceiver); + } udc->transceiver = NULL; the_controller = NULL; diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 414e3c376dbb..5302f988e7e6 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -350,7 +350,7 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_SUSPEND: dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n"); - if (valid_port(wIndex)) { + if (valid_port(wIndex) && ohci_at91->sfr_regmap) { ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); return 0; @@ -393,7 +393,7 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_SUSPEND: dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n"); - if (valid_port(wIndex)) { + if (valid_port(wIndex) && ohci_at91->sfr_regmap) { ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); return 0; diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 363d125300ea..2b4a00fa735d 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -109,7 +109,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci) xhci_dbg(xhci, "RTSOFF 0x%x:\n", temp & RTSOFF_MASK); /* xhci 1.1 controllers have the HCCPARAMS2 register */ - if (hci_version > 100) { + if (hci_version > 0x100) { temp = readl(&xhci->cap_regs->hcc_params2); xhci_dbg(xhci, "HCC PARAMS2 0x%x:\n", (unsigned int) temp); xhci_dbg(xhci, " HC %s Force save context capability", diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 9066ec9e0c2e..67d5dc79b6b5 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -382,7 +382,6 @@ static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk, static int xhci_mtk_setup(struct usb_hcd *hcd); static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = { - .extra_priv_size = sizeof(struct xhci_hcd), .reset = xhci_mtk_setup, }; @@ -678,13 +677,13 @@ static int xhci_mtk_probe(struct platform_device *pdev) goto power_off_phys; } - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) - xhci->shared_hcd->can_do_streams = 1; - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) goto put_usb3_hcd; + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); if (ret) goto dealloc_usb2_hcd; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 6d33b42ffcf5..bd02a6cd8e2c 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -286,6 +286,8 @@ static int xhci_plat_remove(struct platform_device *dev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct clk *clk = xhci->clk; + xhci->xhc_state |= XHCI_STATE_REMOVING; + usb_remove_hcd(xhci->shared_hcd); usb_phy_shutdown(hcd->usb_phy); diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index a59fafb4b329..74436f8ca538 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1308,7 +1308,6 @@ static int tegra_xhci_setup(struct usb_hcd *hcd) } static const struct xhci_driver_overrides tegra_xhci_overrides __initconst = { - .extra_priv_size = sizeof(struct xhci_hcd), .reset = tegra_xhci_setup, }; diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 095778ff984d..37c63cb39714 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -781,12 +781,6 @@ static int iowarrior_probe(struct usb_interface *interface, iface_desc = interface->cur_altsetting; dev->product_id = le16_to_cpu(udev->descriptor.idProduct); - if (iface_desc->desc.bNumEndpoints < 1) { - dev_err(&interface->dev, "Invalid number of endpoints\n"); - retval = -EINVAL; - goto error; - } - /* set up the endpoint information */ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; @@ -797,6 +791,21 @@ static int iowarrior_probe(struct usb_interface *interface, /* this one will match for the IOWarrior56 only */ dev->int_out_endpoint = endpoint; } + + if (!dev->int_in_endpoint) { + dev_err(&interface->dev, "no interrupt-in endpoint found\n"); + retval = -ENODEV; + goto error; + } + + if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) { + if (!dev->int_out_endpoint) { + dev_err(&interface->dev, "no interrupt-out endpoint found\n"); + retval = -ENODEV; + goto error; + } + } + /* we have to check the report_size often, so remember it in the endianness suitable for our machine */ dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint); if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) && diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 4e18600dc9b4..91f66d68bcb7 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c @@ -375,18 +375,24 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, if (of_get_property(np, "dynamic-power-switching", NULL)) hub->conf_data2 |= BIT(7); - if (of_get_property(np, "oc-delay-100us", NULL)) { - hub->conf_data2 &= ~BIT(5); - hub->conf_data2 &= ~BIT(4); - } else if (of_get_property(np, "oc-delay-4ms", NULL)) { - hub->conf_data2 &= ~BIT(5); - hub->conf_data2 |= BIT(4); - } else if (of_get_property(np, "oc-delay-8ms", NULL)) { - hub->conf_data2 |= BIT(5); - hub->conf_data2 &= ~BIT(4); - } else if (of_get_property(np, "oc-delay-16ms", NULL)) { - hub->conf_data2 |= BIT(5); - hub->conf_data2 |= BIT(4); + if (!of_property_read_u32(np, "oc-delay-us", property_u32)) { + if (*property_u32 == 100) { + /* 100 us*/ + hub->conf_data2 &= ~BIT(5); + hub->conf_data2 &= ~BIT(4); + } else if (*property_u32 == 4000) { + /* 4 ms */ + hub->conf_data2 &= ~BIT(5); + hub->conf_data2 |= BIT(4); + } else if (*property_u32 == 16000) { + /* 16 ms */ + hub->conf_data2 |= BIT(5); + hub->conf_data2 |= BIT(4); + } else { + /* 8 ms (DEFAULT) */ + hub->conf_data2 |= BIT(5); + hub->conf_data2 &= ~BIT(4); + } } if (of_get_property(np, "compound-device", NULL)) @@ -432,30 +438,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, } } - hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF; - if (!of_property_read_u32(np, "max-sp-power", property_u32)) - hub->max_power_sp = min_t(u8, be32_to_cpu(*property_u32) / 2, - 250); - - hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS; - if (!of_property_read_u32(np, "max-bp-power", property_u32)) - hub->max_power_bp = min_t(u8, be32_to_cpu(*property_u32) / 2, - 250); - - hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF; - if (!of_property_read_u32(np, "max-sp-current", property_u32)) - hub->max_current_sp = min_t(u8, be32_to_cpu(*property_u32) / 2, - 250); - - hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS; - if (!of_property_read_u32(np, "max-bp-current", property_u32)) - hub->max_current_bp = min_t(u8, be32_to_cpu(*property_u32) / 2, - 250); - hub->power_on_time = USB251XB_DEF_POWER_ON_TIME; - if (!of_property_read_u32(np, "power-on-time", property_u32)) - hub->power_on_time = min_t(u8, be32_to_cpu(*property_u32) / 2, - 255); + if (!of_property_read_u32(np, "power-on-time-ms", property_u32)) + hub->power_on_time = min_t(u8, *property_u32 / 2, 255); if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1)) hub->lang_id = USB251XB_DEF_LANGUAGE_ID; @@ -492,6 +477,10 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, /* The following parameters are currently not exposed to devicetree, but * may be as soon as needed. */ + hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF; + hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS; + hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF; + hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS; hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE; hub->boost_up = USB251XB_DEF_BOOST_UP; hub->boost_x = USB251XB_DEF_BOOST_X; diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c index db68156568e6..b3b33cf7ddf6 100644 --- a/drivers/usb/phy/phy-isp1301.c +++ b/drivers/usb/phy/phy-isp1301.c @@ -33,6 +33,12 @@ static const struct i2c_device_id isp1301_id[] = { }; MODULE_DEVICE_TABLE(i2c, isp1301_id); +static const struct of_device_id isp1301_of_match[] = { + {.compatible = "nxp,isp1301" }, + { }, +}; +MODULE_DEVICE_TABLE(of, isp1301_of_match); + static struct i2c_client *isp1301_i2c_client; static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear) @@ -130,6 +136,7 @@ static int isp1301_remove(struct i2c_client *client) static struct i2c_driver isp1301_driver = { .driver = { .name = DRV_NAME, + .of_match_table = of_match_ptr(isp1301_of_match), }, .probe = isp1301_probe, .remove = isp1301_remove, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index ab78111e0968..6537d3ca2797 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -1500,7 +1500,7 @@ static int digi_read_oob_callback(struct urb *urb) return -1; /* handle each oob command */ - for (i = 0; i < urb->actual_length - 4; i += 4) { + for (i = 0; i < urb->actual_length - 3; i += 4) { opcode = buf[i]; line = buf[i + 1]; status = buf[i + 2]; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index ceaeebaa6f90..a76b95d32157 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1674,6 +1674,12 @@ static void edge_interrupt_callback(struct urb *urb) function = TIUMP_GET_FUNC_FROM_CODE(data[0]); dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__, port_number, function, data[1]); + + if (port_number >= edge_serial->serial->num_ports) { + dev_err(dev, "bad port number %d\n", port_number); + goto exit; + } + port = edge_serial->serial->port[port_number]; edge_port = usb_get_serial_port_data(port); if (!edge_port) { @@ -1755,7 +1761,7 @@ static void edge_bulk_in_callback(struct urb *urb) port_number = edge_port->port->port_number; - if (edge_port->lsr_event) { + if (urb->actual_length > 0 && edge_port->lsr_event) { edge_port->lsr_event = 0; dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n", __func__, port_number, edge_port->lsr_mask, *data); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index a180b17d2432..dd706953b466 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -31,7 +31,6 @@ #define BT_IGNITIONPRO_ID 0x2000 /* function prototypes */ -static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port); static void omninet_process_read_urb(struct urb *urb); static void omninet_write_bulk_callback(struct urb *urb); static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -60,7 +59,6 @@ static struct usb_serial_driver zyxel_omninet_device = { .attach = omninet_attach, .port_probe = omninet_port_probe, .port_remove = omninet_port_remove, - .open = omninet_open, .write = omninet_write, .write_room = omninet_write_room, .write_bulk_callback = omninet_write_bulk_callback, @@ -140,17 +138,6 @@ static int omninet_port_remove(struct usb_serial_port *port) return 0; } -static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port) -{ - struct usb_serial *serial = port->serial; - struct usb_serial_port *wport; - - wport = serial->port[1]; - tty_port_tty_set(&wport->port, tty); - - return usb_serial_generic_open(tty, port); -} - #define OMNINET_HEADERLEN 4 #define OMNINET_BULKOUTSIZE 64 #define OMNINET_PAYLOADSIZE (OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN) diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 93c6c9b08daa..8a069aa154ed 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -200,6 +200,11 @@ static void safe_process_read_urb(struct urb *urb) if (!safe) goto out; + if (length < 2) { + dev_err(&port->dev, "malformed packet\n"); + return; + } + fcs = fcs_compute10(data, length, CRC10_INITFCS); if (fcs) { dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 16cc18369111..9129f6cb8230 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2071,6 +2071,20 @@ UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* + * Reported by Tobias Jakobi <tjakobi@math.uni-bielefeld.de> + * The INIC-3619 bridge is used in the StarTech SLSODDU33B + * SATA-USB enclosure for slimline optical drives. + * + * The quirk enables MakeMKV to properly exchange keys with + * an installed BD drive. + */ +UNUSUAL_DEV( 0x13fd, 0x3609, 0x0209, 0x0209, + "Initio Corporation", + "INIC-3619", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Qinglin Ye <yestyle@gmail.com> */ UNUSUAL_DEV( 0x13fe, 0x3600, 0x0100, 0x0100, "Kingston", |