diff options
59 files changed, 410 insertions, 108 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5ca86e7ab66d..1005367d0f9d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -394,7 +394,7 @@ config ARCH_EP93XX select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_USES_GETTIMEOFFSET - select NEED_MEMORY_H + select NEED_MACH_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -2044,6 +2044,7 @@ config CPU_FREQ_PXA bool depends on CPU_FREQ && ARCH_PXA && PXA25x default y + select CPU_FREQ_TABLE select CPU_FREQ_DEFAULT_GOV_USERSPACE config CPU_FREQ_S3C diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index e5818668d091..0e225b86b652 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -66,5 +66,6 @@ cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + support-8bit; }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 64cedca6fc79..a72299b8e668 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -25,4 +25,8 @@ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; + + sdhci@c8000600 { + support-8bit; + }; }; diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig new file mode 100644 index 000000000000..c5876d244f4b --- /dev/null +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -0,0 +1,214 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9G45=y +CONFIG_MACH_AT91SAM9M10G45EK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_UACCESS_WITH_MEMCPY=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_IPV6_SIT_6RD=y +CONFIG_CFG80211=y +CONFIG_LIB80211=y +CONFIG_MAC80211=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_DAVICOM_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_AT76C50X_USB=m +CONFIG_USB_ZD1201=m +CONFIG_RTL8187=m +CONFIG_ATH_COMMON=m +CONFIG_ATH9K=m +CONFIG_CARL9170=m +CONFIG_B43=m +CONFIG_B43_PHY_N=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RTL8192CU=m +CONFIG_WL1251=m +CONFIG_WL1251_SDIO=m +CONFIG_WL12XX_MENU=m +CONFIG_WL12XX=m +CONFIG_WL12XX_SDIO=m +CONFIG_ZD1211RW=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272 +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_QT1070=m +CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y +# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_FB=y +CONFIG_FB_ATMEL=y +CONFIG_FB_UDL=m +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_ATMEL_AC97C=y +# CONFIG_SND_SPI is not set +CONFIG_SND_USB_AUDIO=m +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ATMEL_USBA=m +CONFIG_USB_ZERO=m +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_EEM=y +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_USB_G_MULTI=m +CONFIG_USB_G_MULTI_CDC=y +CONFIG_MMC=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_SDIO_UART=m +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_ATMELMCI_DMA=y +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_DMADEVICES=y +CONFIG_AT_HDMAC=y +CONFIG_DMATEST=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index b3fea38d55c6..43cab498bc27 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -9,7 +9,7 @@ #ifndef __ASM_HARDWARE_IT8152_H #define __ASM_HARDWARE_IT8152_H -extern unsigned long it8152_base_address; +extern void __iomem *it8152_base_address; #define IT8152_IO_BASE (it8152_base_address + 0x03e00000) #define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0519dd7f034b..e9c2968005dc 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -449,6 +449,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 6484db525bd7..0de4d1835ea4 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -540,7 +540,7 @@ static const struct mxc_nand_platform_data mx31_3ds_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, -#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT +#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT .flash_bbt = 1, #endif }; diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 56ef5f6c8116..323d4c9e9f44 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -77,7 +77,7 @@ config MACH_TETON_BGA Say 'Y' here if you want to support the Marvell PXA168-based Teton BGA Development Board. -config MACH_SHEEVAD +config MACH_GPLUGD bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" select CPU_PXA168 help diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index b0ac942327aa..8f948f981646 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -19,4 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o -obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o +obj-$(CONFIG_MACH_GPLUGD) += gplugd.o diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index 3143e994e672..149b30cd1469 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -30,7 +30,7 @@ extern struct clkops apmu_clk_ops; #define APBC_CLK(_name, _reg, _fnclksel, _rate) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APBC_##_reg, \ + .clk_rst = APBC_##_reg, \ .fnclksel = _fnclksel, \ .rate = _rate, \ .ops = &apbc_clk_ops, \ @@ -38,7 +38,7 @@ struct clk clk_##_name = { \ #define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APBC_##_reg, \ + .clk_rst = APBC_##_reg, \ .fnclksel = _fnclksel, \ .rate = _rate, \ .ops = _ops, \ @@ -46,7 +46,7 @@ struct clk clk_##_name = { \ #define APMU_CLK(_name, _reg, _eval, _rate) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APMU_##_reg, \ + .clk_rst = APMU_##_reg, \ .enable_val = _eval, \ .rate = _rate, \ .ops = &apmu_clk_ops, \ @@ -54,7 +54,7 @@ struct clk clk_##_name = { \ #define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APMU_##_reg, \ + .clk_rst = APMU_##_reg, \ .enable_val = _eval, \ .rate = _rate, \ .ops = _ops, \ diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 0ec0ca80bb3e..5720674739f0 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -27,12 +27,12 @@ EXPORT_SYMBOL(mmp_chip_id); static struct map_desc standard_io_desc[] __initdata = { { .pfn = __phys_to_pfn(APB_PHYS_BASE), - .virtual = APB_VIRT_BASE, + .virtual = (unsigned long)APB_VIRT_BASE, .length = APB_PHYS_SIZE, .type = MT_DEVICE, }, { .pfn = __phys_to_pfn(AXI_PHYS_BASE), - .virtual = AXI_VIRT_BASE, + .virtual = (unsigned long)AXI_VIRT_BASE, .length = AXI_PHYS_SIZE, .type = MT_DEVICE, }, diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 32776f3739f1..69156568bc41 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -188,7 +188,7 @@ static void __init gplugd_init(void) pxa168_add_eth(&gplugd_eth_platform_data); } -MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform") +MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform") .map_io = mmp_map_io, .nr_irqs = IRQ_BOARD_START, .init_irq = pxa168_init_irq, diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h index 3254089a644d..3e404acd6ff4 100644 --- a/arch/arm/mach-mmp/include/mach/addr-map.h +++ b/arch/arm/mach-mmp/include/mach/addr-map.h @@ -11,6 +11,12 @@ #ifndef __ASM_MACH_ADDR_MAP_H #define __ASM_MACH_ADDR_MAP_H +#ifndef __ASSEMBLER__ +#define IOMEM(x) ((void __iomem *)(x)) +#else +#define IOMEM(x) (x) +#endif + /* APB - Application Subsystem Peripheral Bus * * NOTE: the DMA controller registers are actually on the AXI fabric #1 @@ -18,11 +24,11 @@ * peripherals on APB, let's count it into the ABP mapping area. */ #define APB_PHYS_BASE 0xd4000000 -#define APB_VIRT_BASE 0xfe000000 +#define APB_VIRT_BASE IOMEM(0xfe000000) #define APB_PHYS_SIZE 0x00200000 #define AXI_PHYS_BASE 0xd4200000 -#define AXI_VIRT_BASE 0xfe200000 +#define AXI_VIRT_BASE IOMEM(0xfe200000) #define AXI_PHYS_SIZE 0x00200000 /* Static Memory Controller - Chip Select 0 and 1 */ diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h index c017a983eced..d14eeaf16322 100644 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -7,7 +7,7 @@ #define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) +#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) #define NR_BUILTIN_GPIO IRQ_GPIO_NUM diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 65d8689e40c9..7a7e8e4dde41 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -86,7 +86,8 @@ static struct mfp_addr_map mmp2_addr_map[] __initdata = { void mmp2_clear_pmic_int(void) { - unsigned long mfpr_pmic, data; + void __iomem *mfpr_pmic; + unsigned long data; mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4; data = __raw_readl(mfpr_pmic); diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c index e4529af0da72..be19e9ce839a 100644 --- a/arch/arm/mach-mx5/pm-imx5.c +++ b/arch/arm/mach-mx5/pm-imx5.c @@ -19,9 +19,13 @@ static struct clk *gpc_dvfs_clk; +static int mx5_suspend_prepare(void) +{ + return clk_enable(gpc_dvfs_clk); +} + static int mx5_suspend_enter(suspend_state_t state) { - clk_enable(gpc_dvfs_clk); switch (state) { case PM_SUSPEND_MEM: mx5_cpu_lp_set(STOP_POWER_OFF); @@ -42,11 +46,14 @@ static int mx5_suspend_enter(suspend_state_t state) __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); } cpu_do_idle(); - clk_disable(gpc_dvfs_clk); - return 0; } +static void mx5_suspend_finish(void) +{ + clk_disable(gpc_dvfs_clk); +} + static int mx5_pm_valid(suspend_state_t state) { return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); @@ -54,7 +61,9 @@ static int mx5_pm_valid(suspend_state_t state) static const struct platform_suspend_ops mx5_suspend_ops = { .valid = mx5_pm_valid, + .prepare = mx5_suspend_prepare, .enter = mx5_suspend_enter, + .finish = mx5_suspend_finish, }; static int __init mx5_pm_init(void) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 5dcc59d5b9ec..ba532279d1a1 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -349,7 +349,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \ - reg |= frac; \ + reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC; \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ } \ \ diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 484cec54882a..a3e37ff3ad18 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -133,7 +133,7 @@ static const int sdp4430_keymap[] = { KEY(7, 6, KEY_OK), KEY(7, 7, KEY_DOWN), }; -static struct omap_device_pad keypad_pads[] __initdata = { +static struct omap_device_pad keypad_pads[] = { { .name = "kpd_col1.kpd_col1", .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, }, diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 3a12f7586a4c..65f1be6a182c 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -165,8 +165,8 @@ static void __init omap_init_irq(u32 base, int nr_irqs) omap_irq_bank_init_one(bank); - for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20) - omap_alloc_gc(bank->base_reg + j, i, 32); + for (j = 0; j < bank->nr_irqs; j += 32) + omap_alloc_gc(bank->base_reg + j, j, 32); nr_of_irqs += bank->nr_irqs; nr_banks++; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index cd19309fd3b8..61d3c72ded84 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -2,6 +2,27 @@ if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" +config ARCH_PXA_V7 + bool "ARMv7 (PXA95x) based systems" + +if ARCH_PXA_V7 +comment "Marvell Dev Platforms (sorted by hardware release time)" +config MACH_TAVOREVB3 + bool "PXA95x Development Platform (aka TavorEVB III)" + select CPU_PXA955 + +config MACH_SAARB + bool "PXA955 Handheld Platform (aka SAARB)" + select CPU_PXA955 +endif + +config PXA_V7_MACH_AUTO + def_bool y + depends on ARCH_PXA_V7 + depends on !MACH_SAARB + select MACH_TAVOREVB3 + +if !ARCH_PXA_V7 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config ARCH_LUBBOCK @@ -41,19 +62,11 @@ config MACH_TAVOREVB select PXA3xx select CPU_PXA930 -config MACH_TAVOREVB3 - bool "PXA95x Development Platform (aka TavorEVB III)" - select CPU_PXA950 - config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx select CPU_PXA930 -config MACH_SAARB - bool "PXA955 Handheld Platform (aka SAARB)" - select CPU_PXA955 - comment "Third Party Dev Platforms (sorted by vendor name)" config ARCH_PXA_IDP @@ -414,6 +427,7 @@ config MACH_CENTRO bool "Palm Centro 685 (GSM)" default y depends on ARCH_PXA_PALM + select MACH_PALM27X select PXA27x select IWMMXT select PALM_TREO @@ -425,6 +439,7 @@ config MACH_TREO680 bool "Palm Treo 680" default y depends on ARCH_PXA_PALM + select MACH_PALM27X select PXA27x select IWMMXT select PALM_TREO @@ -436,15 +451,18 @@ config MACH_RAUMFELD_RC bool "Raumfeld Controller" select PXA3xx select CPU_PXA300 + select POWER_SUPPLY select HAVE_PWM config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" + select POWER_SUPPLY select PXA3xx select CPU_PXA300 config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" + select POWER_SUPPLY select PXA3xx select CPU_PXA300 @@ -598,7 +616,7 @@ config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select PXA27x select HAVE_PWM - +endif endmenu config PXA25x @@ -688,6 +706,8 @@ config SHARPSL_PM config SHARPSL_PM_MAX1111 bool select HWMON + select SPI + select SPI_MASTER select SENSORS_MAX1111 config PXA_HAVE_ISA_IRQS diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index cc39d17b2e07..be0f7df8685c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -19,7 +19,7 @@ endif obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o -obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o +obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 7765d677adbb..fc0b8544e174 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -591,7 +591,7 @@ static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ct BALLOON3_NAND_CONTROL_REG); if (balloon3_ctl_set) __raw_writel(balloon3_ctl_set, - BALLOON3_NAND_CONTROL_REG | + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); } @@ -608,7 +608,7 @@ static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) __raw_writew( BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3, - BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); /* Deassert correct nCE line */ __raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip, @@ -626,7 +626,7 @@ static int balloon3_nand_probe(struct platform_device *pdev) int ret; __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, - BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR); ver = __raw_readw(BALLOON3_FPGA_VER); if (ver < 0x4f08) @@ -649,7 +649,7 @@ static int balloon3_nand_probe(struct platform_device *pdev) BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 | BALLOON3_NAND_CONTROL_FLWP, - BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); return 0; err2: @@ -807,7 +807,7 @@ static void __init balloon3_init(void) static struct map_desc balloon3_io_desc[] __initdata = { { /* CPLD/FPGA */ - .virtual = BALLOON3_FPGA_VIRT, + .virtual = (unsigned long)BALLOON3_FPGA_VIRT, .pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS), .length = BALLOON3_FPGA_LENGTH, .type = MT_DEVICE, diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 6bf479d9b5ac..ebd9259f5ac9 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -26,7 +26,7 @@ #include <asm/hardware/it8152.h> -unsigned long it8152_base_address; +void __iomem *it8152_base_address; static int cmx2xx_it8152_irq_gpio; static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 349896c53abd..f2e4190080cb 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -39,7 +39,7 @@ extern void cmx270_init(void); #define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40) /* virtual addresses for statically mapped regions */ -#define CMX2XX_VIRT_BASE (0xe8000000) +#define CMX2XX_VIRT_BASE (void __iomem *)(0xe8000000) #define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE) /* physical address if local-bus attached devices */ @@ -482,7 +482,7 @@ static void __init cmx2xx_init_irq(void) /* Map PCI companion statically */ static struct map_desc cmx2xx_io_desc[] __initdata = { [0] = { /* PCI bridge */ - .virtual = CMX2XX_IT8152_VIRT, + .virtual = (unsigned long)CMX2XX_IT8152_VIRT, .pfn = __phys_to_pfn(PXA_CS4_PHYS), .length = SZ_64M, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index d2da301619f0..3a7387f93c38 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -775,7 +775,6 @@ static struct gpio cm_x300_wi2wi_gpios[] __initdata = { static void __init cm_x300_init_wi2wi(void) { - int bt_reset, wlan_en; int err; if (system_rev < 130) { @@ -791,12 +790,11 @@ static void __init cm_x300_init_wi2wi(void) } udelay(10); - gpio_set_value(bt_reset, 0); + gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0); udelay(10); - gpio_set_value(bt_reset, 1); + gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1); - gpio_free(wlan_en); - gpio_free(bt_reset); + gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios)); } /* MFP */ diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h index f4c03659168c..bbf9df37ad4b 100644 --- a/arch/arm/mach-pxa/include/mach/addr-map.h +++ b/arch/arm/mach-pxa/include/mach/addr-map.h @@ -20,7 +20,7 @@ * Peripheral Bus */ #define PERIPH_PHYS 0x40000000 -#define PERIPH_VIRT 0xf2000000 +#define PERIPH_VIRT IOMEM(0xf2000000) #define PERIPH_SIZE 0x02000000 /* @@ -28,21 +28,21 @@ */ #define PXA2XX_SMEMC_PHYS 0x48000000 #define PXA3XX_SMEMC_PHYS 0x4a000000 -#define SMEMC_VIRT 0xf6000000 +#define SMEMC_VIRT IOMEM(0xf6000000) #define SMEMC_SIZE 0x00100000 /* * Dynamic Memory Controller (only on PXA3xx) */ #define DMEMC_PHYS 0x48100000 -#define DMEMC_VIRT 0xf6100000 +#define DMEMC_VIRT IOMEM(0xf6100000) #define DMEMC_SIZE 0x00100000 /* * Internal Memory Controller (PXA27x and later) */ #define IMEMC_PHYS 0x58000000 -#define IMEMC_VIRT 0xfe000000 +#define IMEMC_VIRT IOMEM(0xfe000000) #define IMEMC_SIZE 0x00100000 #endif /* __ASM_MACH_ADDR_MAP_H */ diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 7074e76146c9..6d7eab3d0867 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -23,7 +23,7 @@ enum balloon3_features { }; #define BALLOON3_FPGA_PHYS PXA_CS4_PHYS -#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */ +#define BALLOON3_FPGA_VIRT IOMEM(0xf1000000) /* as per balloon2 */ #define BALLOON3_FPGA_LENGTH 0x01000000 #define BALLOON3_FPGA_SETnCLR (0x1000) diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h index 41b4c93a96c2..576868f8b8c5 100644 --- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h +++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h @@ -25,7 +25,7 @@ #define GPIO_REGS_VIRT io_p2v(0x40E00000) #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) +#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) /* GPIO Pin Level Registers */ #define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index de63ca3016b4..8184669dde28 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -36,22 +36,23 @@ * Note that not all PXA2xx chips implement all those addresses, and the * kernel only maps the minimum needed range of this mapping. */ -#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) #define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) +#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) #ifndef __ASSEMBLY__ - -# define __REG(x) (*((volatile u32 *)io_p2v(x))) +# define IOMEM(x) ((void __iomem *)(x)) +# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) /* With indexed regs we don't want to feed the index through io_p2v() especially if it is a variable, otherwise horrible code will result. */ # define __REG2(x,y) \ - (*(volatile u32 *)((u32)&__REG(x) + (y))) + (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) # define __PREG(x) (io_v2p((u32)&(x))) #else +# define IOMEM(x) x # define __REG(x) io_p2v(x) # define __PREG(x) io_v2p(x) diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h index cd070092b6eb..4edc712a2de8 100644 --- a/arch/arm/mach-pxa/include/mach/lpd270.h +++ b/arch/arm/mach-pxa/include/mach/lpd270.h @@ -13,13 +13,13 @@ #define __ASM_ARCH_LPD270_H #define LPD270_CPLD_PHYS PXA_CS2_PHYS -#define LPD270_CPLD_VIRT 0xf0000000 +#define LPD270_CPLD_VIRT IOMEM(0xf0000000) #define LPD270_CPLD_SIZE 0x00100000 #define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000) /* CPLD registers */ -#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x))) +#define LPD270_CPLD_REG(x) (LPD270_CPLD_VIRT + (x)) #define LPD270_CONTROL LPD270_CPLD_REG(0x00) #define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04) #define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08) diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index 297387ec3618..990d2bf2fb45 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -16,7 +16,6 @@ #define __ARCH_PXA_MTD_XIP_H__ #include <mach/regs-ost.h> -#include <mach/regs-intc.h> #define xip_irqpending() (ICIP & ICMR) diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h index 0a5e5eadebf5..f80bbe246afe 100644 --- a/arch/arm/mach-pxa/include/mach/palm27x.h +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -34,7 +34,7 @@ extern struct pxafb_mode_info palm_320x320_new_lcd_mode; extern void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode); #else -static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {} +#define palm27x_lcd_init(power, mode) do {} while (0) #endif #if defined(CONFIG_USB_GADGET_PXA27X) || \ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 10abc4f2e8e4..7074a6ed46c6 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -71,7 +71,7 @@ /* Various addresses */ #define PALMTX_PCMCIA_PHYS 0x28000000 -#define PALMTX_PCMCIA_VIRT 0xf0000000 +#define PALMTX_PCMCIA_VIRT IOMEM(0xf0000000) #define PALMTX_PCMCIA_SIZE 0x100000 #define PALMTX_PHYS_RAM_START 0xa0000000 @@ -84,8 +84,8 @@ #define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24)) #define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25)) -#define PALMTX_NAND_ALE_VIRT 0xff100000 -#define PALMTX_NAND_CLE_VIRT 0xff200000 +#define PALMTX_NAND_ALE_VIRT IOMEM(0xff100000) +#define PALMTX_NAND_CLE_VIRT IOMEM(0xff200000) /* TOUCHSCREEN */ #define AC97_LINK_FRAME 21 diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index b9b1bdc4bacc..7cff640582b8 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -1,6 +1,7 @@ #ifndef __MACH_PXA27x_H #define __MACH_PXA27x_H +#include <linux/suspend.h> #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa27x.h> @@ -21,6 +22,7 @@ extern void __init pxa27x_map_io(void); extern void __init pxa27x_init_irq(void); extern int __init pxa27x_set_pwrmode(unsigned int mode); +extern void pxa27x_cpu_pm_enter(suspend_state_t state); #define pxa27x_handle_irq ichp_handle_irq diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h new file mode 100644 index 000000000000..cbb097c4cb1f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa95x.h @@ -0,0 +1,7 @@ +#ifndef __MACH_PXA95X_H +#define __MACH_PXA95X_H + +#include <mach/pxa3xx.h> +#include <mach/mfp-pxa930.h> + +#endif /* __MACH_PXA95X_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 01a45ac48114..486b4c519ae2 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -158,5 +158,18 @@ struct pxafb_mach_info { void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); unsigned long pxafb_get_hsync_time(struct device *dev); +#ifdef CONFIG_FB_PXA_SMARTPANEL extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); extern int pxafb_smart_flush(struct fb_info *info); +#else +static inline int pxafb_smart_queue(struct fb_info *info, + uint16_t *cmds, int n) +{ + return 0; +} + +static inline int pxafb_smart_flush(struct fb_info *info) +{ + return 0; +} +#endif diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h index 654adc90c9a0..b7de471b273a 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/include/mach/smemc.h @@ -13,7 +13,7 @@ #define PXA2XX_SMEMC_BASE 0x48000000 #define PXA3XX_SMEMC_BASE 0x4a000000 -#define SMEMC_VIRT 0xf6000000 +#define SMEMC_VIRT IOMEM(0xf6000000) #define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */ #define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */ diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index 0641f31a56b7..56024f81d57e 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -68,7 +68,7 @@ * Be gentle, and remap that over 32kB... */ -#define ZEUS_CPLD (0xf0000000) +#define ZEUS_CPLD IOMEM(0xf0000000) #define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000) #define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000) #define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000) @@ -76,7 +76,7 @@ /* CPLD register bits */ #define ZEUS_CPLD_CONTROL_CF_RST 0x01 -#define ZEUS_PC104IO (0xf1000000) +#define ZEUS_PC104IO IOMEM(0xf1000000) #define ZEUS_SRAM_SIZE (256 * 1024) diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h index ea24998b923c..ecca976f03d2 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -19,7 +19,7 @@ extern int wm9713_irq; extern int lcd_id; extern int lcd_orientation; -#ifdef CONFIG_CPU_PXA300 +#ifdef CONFIG_MACH_ZYLONITE300 extern void zylonite_pxa300_init(void); #else static inline void zylonite_pxa300_init(void) @@ -29,7 +29,7 @@ static inline void zylonite_pxa300_init(void) } #endif -#ifdef CONFIG_CPU_PXA320 +#ifdef CONFIG_MACH_ZYLONITE320 extern void zylonite_pxa320_init(void); #else static inline void zylonite_pxa320_init(void) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 8d9200f92268..532c5d3a97d2 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -26,7 +26,7 @@ #include "generic.h" -#define IRQ_BASE (void __iomem *)io_p2v(0x40d00000) +#define IRQ_BASE io_p2v(0x40d00000) #define ICIP (0x000) #define ICMR (0x004) @@ -64,7 +64,7 @@ static inline void __iomem *irq_base(int i) 0x40d00130, }; - return (void __iomem *)io_p2v(phys_base[i]); + return io_p2v(phys_base[i]); } void pxa_mask_irq(struct irq_data *d) diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 64540d908958..1dd530279e0b 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -479,7 +479,7 @@ static void __init lpd270_init(void) static struct map_desc lpd270_io_desc[] __initdata = { { - .virtual = LPD270_CPLD_VIRT, + .virtual = (unsigned long)LPD270_CPLD_VIRT, .pfn = __phys_to_pfn(LPD270_CPLD_PHYS), .length = LPD270_CPLD_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 7346fbfa8101..94e9708b349d 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -423,6 +423,7 @@ static void __init palmphone_common_init(void) palmtreo_leds_init(); } +#ifdef CONFIG_MACH_TREO680 static void __init treo680_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); @@ -430,7 +431,9 @@ static void __init treo680_init(void) palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY, GPIO_NR_TREO680_SD_POWER, 0); } +#endif +#ifdef CONFIG_MACH_CENTRO static void __init centro_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config)); @@ -438,7 +441,9 @@ static void __init centro_init(void) palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1, GPIO_NR_CENTRO_SD_POWER, 1); } +#endif +#ifdef CONFIG_MACH_TREO680 MACHINE_START(TREO680, "Palm Treo 680") .atag_offset = 0x100, .map_io = pxa27x_map_io, @@ -448,7 +453,9 @@ MACHINE_START(TREO680, "Palm Treo 680") .timer = &pxa_timer, .init_machine = treo680_init, MACHINE_END +#endif +#ifdef CONFIG_MACH_CENTRO MACHINE_START(CENTRO, "Palm Centro 685") .atag_offset = 0x100, .map_io = pxa27x_map_io, @@ -458,3 +465,4 @@ MACHINE_START(CENTRO, "Palm Centro 685") .timer = &pxa_timer, .init_machine = centro_init, MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 2b9e76fc2c90..4e3e45927e95 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -247,7 +247,7 @@ static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; + char __iomem *nandaddr = this->IO_ADDR_W; if (cmd == NAND_CMD_NONE) return; @@ -315,17 +315,17 @@ static inline void palmtx_nand_init(void) {} ******************************************************************************/ static struct map_desc palmtx_io_desc[] __initdata = { { - .virtual = PALMTX_PCMCIA_VIRT, + .virtual = (unsigned long)PALMTX_PCMCIA_VIRT, .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS), .length = PALMTX_PCMCIA_SIZE, .type = MT_DEVICE, }, { - .virtual = PALMTX_NAND_ALE_VIRT, + .virtual = (unsigned long)PALMTX_NAND_ALE_VIRT, .pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS), .length = SZ_1M, .type = MT_DEVICE, }, { - .virtual = PALMTX_NAND_CLE_VIRT, + .virtual = (unsigned long)PALMTX_NAND_CLE_VIRT, .pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS), .length = SZ_1M, .type = MT_DEVICE, diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 8746e1090b6e..f05f9486b0cb 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -325,7 +325,7 @@ void __init pxa26x_init_irq(void) static struct map_desc pxa25x_io_desc[] __initdata = { { /* Mem Ctl */ - .virtual = SMEMC_VIRT, + .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE), .length = 0x00200000, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 2bb5cf8ba6ec..bc5a98ebaa72 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -391,7 +391,7 @@ void __init pxa27x_init_irq(void) static struct map_desc pxa27x_io_desc[] __initdata = { { /* Mem Ctl */ - .virtual = SMEMC_VIRT, + .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE), .length = 0x00200000, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index ce7168b233e2..e28dfb88827f 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -265,6 +265,7 @@ int pxa3xx_u2d_start_hc(struct usb_bus *host) return err; } +EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc); void pxa3xx_u2d_stop_hc(struct usb_bus *host) { @@ -277,6 +278,7 @@ void pxa3xx_u2d_stop_hc(struct usb_bus *host) clk_disable(u2d->clk); } +EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc); static int pxa3xx_u2d_probe(struct platform_device *pdev) { diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index f940a1345531..0737c59b88ae 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -393,7 +393,7 @@ void __init pxa3xx_init_irq(void) static struct map_desc pxa3xx_io_desc[] __initdata = { { /* Mem Ctl */ - .virtual = SMEMC_VIRT, + .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE), .length = 0x00200000, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index 3c988b6f718f..3e999e308a2d 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -24,6 +24,7 @@ #include <mach/hardware.h> #include <mach/mfp.h> #include <mach/mfp-pxa930.h> +#include <mach/pxa95x.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 84ed72de53b5..ead32c90fec1 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -686,7 +686,8 @@ static void z2_power_off(void) */ PSPR = 0x0; local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET); + pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); + pxa27x_cpu_pm_enter(PM_SUSPEND_MEM); } #else #define z2_power_off NULL diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index c424e7d85ce3..498b83b089f3 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -860,25 +860,25 @@ static void __init zeus_init(void) static struct map_desc zeus_io_desc[] __initdata = { { - .virtual = ZEUS_CPLD_VERSION, + .virtual = (unsigned long)ZEUS_CPLD_VERSION, .pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS), .length = 0x1000, .type = MT_DEVICE, }, { - .virtual = ZEUS_CPLD_ISA_IRQ, + .virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ, .pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS), .length = 0x1000, .type = MT_DEVICE, }, { - .virtual = ZEUS_CPLD_CONTROL, + .virtual = (unsigned long)ZEUS_CPLD_CONTROL, .pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS), .length = 0x1000, .type = MT_DEVICE, }, { - .virtual = ZEUS_PC104IO, + .virtual = (unsigned long)ZEUS_PC104IO, .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS), .length = 0x00800000, .type = MT_DEVICE, diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 1da23bb87c16..8aa104a4711a 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -99,7 +99,27 @@ static void ux500_l2x0_inv_all(void) ux500_cache_sync(); } -static int ux500_l2x0_init(void) +static int __init ux500_l2x0_unlock(void) +{ + int i; + + /* + * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions + * apparently locks both caches before jumping to the kernel. The + * l2x0 core will not touch the unlock registers if the l2x0 is + * already enabled, so we do it right here instead. The PL310 has + * 8 sets of registers, one per possible CPU. + */ + for (i = 0; i < 8; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } + return 0; +} + +static int __init ux500_l2x0_init(void) { if (cpu_is_u5500()) l2x0_base = __io_address(U5500_L2CC_BASE); @@ -108,6 +128,9 @@ static int ux500_l2x0_init(void) else ux500_unknown_soc(); + /* Unlock before init */ + ux500_l2x0_unlock(); + /* 64KB way size, 8 way associativity, force WA */ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index ebbce33097a7..45099566fecc 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -89,11 +89,11 @@ typedef u64 iomux_v3_cfg_t; #define PAD_CTL_HYS (1 << 8) #define PAD_CTL_PKE (1 << 7) -#define PAD_CTL_PUE (1 << 6) -#define PAD_CTL_PUS_100K_DOWN (0 << 4) -#define PAD_CTL_PUS_47K_UP (1 << 4) -#define PAD_CTL_PUS_100K_UP (2 << 4) -#define PAD_CTL_PUS_22K_UP (3 << 4) +#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) +#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) #define PAD_CTL_ODE (1 << 3) diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 89e68e07b0a8..5c79c29f2833 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -456,7 +456,7 @@ struct mfp_addr_map { #define MFP_ADDR_END { MFP_PIN_INVALID, 0 } -void __init mfp_init_base(unsigned long mfpr_base); +void __init mfp_init_base(void __iomem *mfpr_base); void __init mfp_init_addr(struct mfp_addr_map *map); /* diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index be12eadcce20..2c4dbb1f4236 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -229,7 +229,7 @@ void mfp_write(int mfp, unsigned long val) spin_unlock_irqrestore(&mfp_spin_lock, flags); } -void __init mfp_init_base(unsigned long mfpr_base) +void __init mfp_init_base(void __iomem *mfpr_base) { int i; @@ -237,7 +237,7 @@ void __init mfp_init_base(unsigned long mfpr_base) for (i = 0; i < ARRAY_SIZE(mfp_table); i++) mfp_table[i].config = -1; - mfpr_mmio_base = (void __iomem *)mfpr_base; + mfpr_mmio_base = mfpr_base; } void __init mfp_init_addr(struct mfp_addr_map *map) diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 9052925c6fa2..ee137712f9db 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -122,7 +122,7 @@ static int __init pxa_init_gpio_chip(int gpio_end) struct gpio_chip *c = &chips[i].chip; sprintf(chips[i].label, "gpio-%d", i); - chips[i].regbase = (void __iomem *)GPIO_BANK(i); + chips[i].regbase = GPIO_BANK(i); c->base = gpio; c->label = chips[i].label; diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 50d5f27f09d0..d593878d66d0 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -63,7 +63,7 @@ config AD525X_DPOT_SPI config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" - depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 + depends on HAVE_CLK help This option enables device driver support for the PWM channels on certain Atmel processors. Pulse Width Modulation is used for diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c index f56d7de7c751..22a75e610f12 100644 --- a/drivers/pcmcia/pxa2xx_balloon3.c +++ b/drivers/pcmcia/pxa2xx_balloon3.c @@ -97,7 +97,7 @@ static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt, static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) { - __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG | + __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG + ((state->flags & SS_RESET) ? BALLOON3_FPGA_SETnCLR : 0)); return 0; diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c index afea9abbd678..6ce34160da78 100644 --- a/drivers/video/mbx/mbxfb.c +++ b/drivers/video/mbx/mbxfb.c @@ -34,7 +34,7 @@ #include "regs.h" #include "reg_bits.h" -static unsigned long virt_base_2700; +static void __iomem *virt_base_2700; #define write_reg(val, reg) do { writel((val), (reg)); } while(0) @@ -850,7 +850,7 @@ static int mbxfb_suspend(struct platform_device *dev, pm_message_t state) { /* make frame buffer memory enter self-refresh mode */ write_reg_dly(LMPWR_MC_PWR_SRM, LMPWR); - while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM) + while (readl(LMPWRSTAT) != LMPWRSTAT_MC_PWR_SRM) ; /* empty statement */ /* reset the device, since it's initial state is 'mostly sleeping' */ @@ -946,7 +946,7 @@ static int __devinit mbxfb_probe(struct platform_device *dev) ret = -EINVAL; goto err3; } - virt_base_2700 = (unsigned long)mfbi->reg_virt_addr; + virt_base_2700 = mfbi->reg_virt_addr; mfbi->fb_virt_addr = ioremap_nocache(mfbi->fb_phys_addr, res_size(mfbi->fb_req)); diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index e89778f4081f..1d1e4f175e78 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1309,16 +1309,6 @@ static int pxafb_smart_init(struct pxafb_info *fbi) return 0; } #else -int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int n_cmds) -{ - return 0; -} - -int pxafb_smart_flush(struct fb_info *info) -{ - return 0; -} - static inline int pxafb_smart_init(struct pxafb_info *fbi) { return 0; } #endif /* CONFIG_FB_PXA_SMARTPANEL */ |