summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-omap2/Kconfig6
-rw-r--r--arch/arm/mach-omap2/Makefile1
-rw-r--r--arch/arm/mach-omap2/board-overo.c571
3 files changed, 0 insertions, 578 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 8b3aa4ca59a2..1b8a45a4642a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -203,12 +203,6 @@ config MACH_OMAP3_TORPEDO
for full description please see the products webpage at
http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
-config MACH_OVERO
- bool "Gumstix Overo board"
- depends on ARCH_OMAP3
- default y
- select OMAP_PACKAGE_CBB
-
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ff634a1c26f5..a60e98689713 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
-obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
deleted file mode 100644
index 2dae6ccd39bb..000000000000
--- a/arch/arm/mach-omap2/board-overo.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * board-overo.c (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "common.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "gpmc.h"
-#include "hsmmc.h"
-#include "board-flash.h"
-#include "common-board-devices.h"
-
-#define NAND_CS 0
-
-#define OVERO_GPIO_BT_XGATE 15
-#define OVERO_GPIO_W2W_NRESET 16
-#define OVERO_GPIO_PENDOWN 114
-#define OVERO_GPIO_BT_NRESET 164
-#define OVERO_GPIO_USBH_CPEN 168
-#define OVERO_GPIO_USBH_NRESET 183
-
-#define OVERO_SMSC911X_CS 5
-#define OVERO_SMSC911X_GPIO 176
-#define OVERO_SMSC911X_NRESET 64
-#define OVERO_SMSC911X2_CS 4
-#define OVERO_SMSC911X2_GPIO 65
-
-/* whether to register LCD35 instead of LCD43 */
-static bool overo_use_lcd35;
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
- defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-/* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply[] = {
- REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_init_data vads7846_regulator = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ads7846_supply),
- .consumer_supplies = ads7846_supply,
-};
-
-static struct fixed_voltage_config vads7846 = {
- .supply_name = "vads7846",
- .microvolts = 3300000, /* 3.3V */
- .gpio = -EINVAL,
- .startup_delay = 0,
- .init_data = &vads7846_regulator,
-};
-
-static struct platform_device vads7846_device = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &vads7846,
- },
-};
-
-static void __init overo_ads7846_init(void)
-{
- omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
- platform_device_register(&vads7846_device);
-}
-
-#else
-static inline void __init overo_ads7846_init(void) { return; }
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
- .id = 0,
- .cs = OVERO_SMSC911X_CS,
- .gpio_irq = OVERO_SMSC911X_GPIO,
- .gpio_reset = OVERO_SMSC911X_NRESET,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct omap_smsc911x_platform_data smsc911x2_cfg = {
- .id = 1,
- .cs = OVERO_SMSC911X2_CS,
- .gpio_irq = OVERO_SMSC911X2_GPIO,
- .gpio_reset = -EINVAL,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static void __init overo_init_smsc911x(void)
-{
- gpmc_smsc911x_init(&smsc911x_cfg);
- gpmc_smsc911x_init(&smsc911x2_cfg);
-}
-
-#else
-static inline void __init overo_init_smsc911x(void) { return; }
-#endif
-
-/* DSS */
-#define OVERO_GPIO_LCD_EN 144
-#define OVERO_GPIO_LCD_BL 145
-
-static struct connector_atv_platform_data overo_tv_pdata = {
- .name = "tv",
- .source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .invert_polarity = false,
-};
-
-static struct platform_device overo_tv_connector_device = {
- .name = "connector-analog-tv",
- .id = 0,
- .dev.platform_data = &overo_tv_pdata,
-};
-
-static const struct display_timing overo_lcd43_videomode = {
- .pixelclock = { 0, 9200000, 0 },
-
- .hactive = { 0, 480, 0 },
- .hfront_porch = { 0, 8, 0 },
- .hback_porch = { 0, 4, 0 },
- .hsync_len = { 0, 41, 0 },
-
- .vactive = { 0, 272, 0 },
- .vfront_porch = { 0, 4, 0 },
- .vback_porch = { 0, 2, 0 },
- .vsync_len = { 0, 10, 0 },
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
- DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data overo_lcd43_pdata = {
- .name = "lcd43",
- .source = "dpi.0",
-
- .data_lines = 24,
-
- .display_timing = &overo_lcd43_videomode,
-
- .enable_gpio = OVERO_GPIO_LCD_EN,
- .backlight_gpio = OVERO_GPIO_LCD_BL,
-};
-
-static struct platform_device overo_lcd43_device = {
- .name = "panel-dpi",
- .id = 0,
- .dev.platform_data = &overo_lcd43_pdata,
-};
-
-static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 3,
-};
-
-static struct platform_device overo_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &overo_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = -1,
-};
-
-static struct platform_device overo_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &overo_tfp410_pdata,
-};
-
-static struct omap_dss_board_info overo_dss_data = {
- .default_display_name = "lcd43",
-};
-
-static void __init overo_display_init(void)
-{
- omap_display_init(&overo_dss_data);
-
- if (!overo_use_lcd35)
- platform_device_register(&overo_lcd43_device);
- platform_device_register(&overo_tfp410_device);
- platform_device_register(&overo_dvi_connector_device);
- platform_device_register(&overo_tv_connector_device);
-}
-
-static struct mtd_partition overo_nand_partitions[] = {
- {
- .name = "xloader",
- .offset = 0, /* Offset = 0x00000 */
- .size = 4 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE
- },
- {
- .name = "uboot",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 14 * NAND_BLOCK_SIZE,
- },
- {
- .name = "uboot environment",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */
- .size = 2 * NAND_BLOCK_SIZE,
- },
- {
- .name = "linux",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 32 * NAND_BLOCK_SIZE,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- },
- {
- .mmc = 2,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .transceiver = true,
- .ocr_mask = 0x00100000, /* 3.3V */
- },
- {} /* Terminator */
-};
-
-static struct regulator_consumer_supply overo_vmmc1_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led gpio_leds[] = {
- {
- .name = "overo:red:gpio21",
- .default_trigger = "heartbeat",
- .gpio = 21,
- .active_low = true,
- },
- {
- .name = "overo:blue:gpio22",
- .default_trigger = "none",
- .gpio = 22,
- .active_low = true,
- },
- {
- .name = "overo:blue:COM",
- .default_trigger = "mmc0",
- .gpio = -EINVAL, /* gets replaced */
- .active_low = true,
- },
-};
-
-static struct gpio_led_platform_data gpio_leds_pdata = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_leds_pdata,
- },
-};
-
-static void __init overo_init_led(void)
-{
- platform_device_register(&gpio_leds_device);
-}
-
-#else
-static inline void __init overo_init_led(void) { return; }
-#endif
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button gpio_buttons[] = {
- {
- .code = BTN_0,
- .gpio = 23,
- .desc = "button0",
- .wakeup = 1,
- },
- {
- .code = BTN_1,
- .gpio = 14,
- .desc = "button1",
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data gpio_keys_pdata = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &gpio_keys_pdata,
- },
-};
-
-static void __init overo_init_keys(void)
-{
- platform_device_register(&gpio_keys_device);
-}
-
-#else
-static inline void __init overo_init_keys(void) { return; }
-#endif
-
-static int overo_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
- return 0;
-}
-
-static struct twl4030_gpio_platform_data overo_gpio_data = {
- .use_leds = true,
- .setup = overo_twl_gpio_setup,
-};
-
-static struct regulator_init_data overo_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply),
- .consumer_supplies = overo_vmmc1_supply,
-};
-
-static struct twl4030_platform_data overo_twldata = {
- .gpio = &overo_gpio_data,
- .vmmc1 = &overo_vmmc1,
-};
-
-static int __init overo_i2c_init(void)
-{
- omap3_pmic_get_config(&overo_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
- TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
- overo_twldata.vpll2->constraints.name = "VDVI";
-
- omap3_pmic_init("tps65950", &overo_twldata);
- /* i2c2 pins are used for gpio */
- omap_register_i2c_bus(3, 400, NULL, 0);
- return 0;
-}
-
-static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
- .name = "lcd35",
- .source = "dpi.0",
-
- .data_lines = 24,
-
- .enable_gpio = OVERO_GPIO_LCD_EN,
- .backlight_gpio = OVERO_GPIO_LCD_BL,
-};
-
-/*
- * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
- * selection is done based on the overo_use_lcd35 field. If new SPI
- * devices are added here, extra work is needed to make only the lgphilips panel
- * affected by the overo_use_lcd35 field.
- */
-static struct spi_board_info overo_spi_board_info[] __initdata = {
- {
- .modalias = "panel_lgphilips_lb035q02",
- .bus_num = 1,
- .chip_select = 1,
- .max_speed_hz = 500000,
- .mode = SPI_MODE_3,
- .platform_data = &overo_lcd35_pdata,
- },
-};
-
-static int __init overo_spi_init(void)
-{
- overo_ads7846_init();
-
- if (overo_use_lcd35) {
- spi_register_board_info(overo_spi_board_info,
- ARRAY_SIZE(overo_spi_board_info));
- }
- return 0;
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 2,
- .reset_gpio = OVERO_GPIO_USBH_NRESET,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct gpio overo_bt_gpios[] __initdata = {
- { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" },
- { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
- REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init overo_init(void)
-{
- int ret;
-
- if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
- overo_use_lcd35 = true;
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- overo_i2c_init();
- omap_hsmmc_init(mmc);
- omap_serial_init();
- omap_sdrc_init(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- board_nand_init(overo_nand_partitions,
- ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
- overo_spi_init();
- overo_init_smsc911x();
- overo_init_led();
- overo_init_keys();
- omap_twl4030_audio_init("overo", NULL);
-
- overo_display_init();
-
- /* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
- "OVERO_GPIO_W2W_NRESET");
- if (ret == 0) {
- gpio_export(OVERO_GPIO_W2W_NRESET, 0);
- gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
- udelay(10);
- gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
- } else {
- pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
- }
-
- ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
- if (ret) {
- pr_err("%s: could not obtain BT gpios\n", __func__);
- } else {
- gpio_export(OVERO_GPIO_BT_XGATE, 0);
- gpio_export(OVERO_GPIO_BT_NRESET, 0);
- gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
- mdelay(6);
- gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
- }
-
- ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
- "OVERO_GPIO_USBH_CPEN");
- if (ret == 0)
- gpio_export(OVERO_GPIO_USBH_CPEN, 0);
- else
- pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
-}
-
-MACHINE_START(OVERO, "Gumstix Overo")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap35xx_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = overo_init,
- .init_late = omap35xx_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END