diff options
| -rw-r--r-- | drivers/char/tpm/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/char/tpm/Makefile | 4 | ||||
| -rw-r--r-- | drivers/char/tpm/tpm_tis_spi.c | 78 | ||||
| -rw-r--r-- | drivers/char/tpm/tpm_tis_spi.h | 53 | ||||
| -rw-r--r-- | drivers/char/tpm/tpm_tis_spi_cr50.c | 322 |
5 files changed, 432 insertions, 32 deletions
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 9c37047f4b56..aacdeed93320 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -67,6 +67,13 @@ config TCG_TIS_SPI within Linux. To compile this driver as a module, choose M here; the module will be called tpm_tis_spi. +config TCG_TIS_SPI_CR50 + bool "Cr50 SPI Interface" + depends on TCG_TIS_SPI + help + If you have a H1 secure module running Cr50 firmware on SPI bus, + say Yes and it will be accessible from within Linux. + config TCG_TIS_I2C_ATMEL tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)" depends on I2C diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile index c354cdff9c62..5a0d99d4fec0 100644 --- a/drivers/char/tpm/Makefile +++ b/drivers/char/tpm/Makefile @@ -21,7 +21,9 @@ tpm-$(CONFIG_EFI) += eventlog/efi.o tpm-$(CONFIG_OF) += eventlog/of.o obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o obj-$(CONFIG_TCG_TIS) += tpm_tis.o -obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o +obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi_mod.o +tpm_tis_spi_mod-y := tpm_tis_spi.o +tpm_tis_spi_mod-$(CONFIG_TCG_TIS_SPI_CR50) += tpm_tis_spi_cr50.o obj-$(CONFIG_TCG_TIS_I2C_ATMEL) += tpm_i2c_atmel.o obj-$(CONFIG_TCG_TIS_I2C_INFINEON) += tpm_i2c_infineon.o obj-$(CONFIG_TCG_TIS_I2C_NUVOTON) += tpm_i2c_nuvoton.o diff --git a/drivers/char/tpm/tpm_tis_spi.c b/drivers/char/tpm/tpm_tis_spi.c index b3ed85671dd8..5e4253e7c080 100644 --- a/drivers/char/tpm/tpm_tis_spi.c +++ b/drivers/char/tpm/tpm_tis_spi.c @@ -20,6 +20,7 @@ * Dorn and Kyleen Hall and Jarko Sakkinnen. */ +#include <linux/completion.h> #include <linux/init.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -31,27 +32,16 @@ #include <linux/spi/spi.h> #include <linux/gpio.h> +#include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> #include <linux/tpm.h> #include "tpm.h" #include "tpm_tis_core.h" +#include "tpm_tis_spi.h" #define MAX_SPI_FRAMESIZE 64 -struct tpm_tis_spi_phy { - struct tpm_tis_data priv; - struct spi_device *spi_device; - int (*flow_control)(struct tpm_tis_spi_phy *phy, - struct spi_transfer *xfer); - u8 *iobuf; -}; - -static inline struct tpm_tis_spi_phy *to_tpm_tis_spi_phy(struct tpm_tis_data *data) -{ - return container_of(data, struct tpm_tis_spi_phy, priv); -} - /* * TCG SPI flow control is documented in section 6.4 of the spec[1]. In short, * keep trying to read from the device until MISO goes high indicating the @@ -87,8 +77,8 @@ static int tpm_tis_spi_flow_control(struct tpm_tis_spi_phy *phy, return 0; } -static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len, - u8 *in, const u8 *out) +int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len, + u8 *in, const u8 *out) { struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data); int ret = 0; @@ -136,6 +126,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len, spi_message_init(&m); spi_message_add_tail(&spi_xfer, &m); + reinit_completion(&phy->ready); ret = spi_sync_locked(phy->spi_device, &m); if (ret < 0) goto exit; @@ -165,7 +156,7 @@ static int tpm_tis_spi_write_bytes(struct tpm_tis_data *data, u32 addr, return tpm_tis_spi_transfer(data, addr, len, NULL, value); } -static int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result) +int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result) { __le16 result_le; int rc; @@ -178,7 +169,7 @@ static int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result) return rc; } -static int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result) +int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result) { __le32 result_le; int rc; @@ -191,7 +182,7 @@ static int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result) return rc; } -static int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value) +int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value) { __le32 value_le; int rc; @@ -203,6 +194,18 @@ static int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value) return rc; } +int tpm_tis_spi_init(struct spi_device *spi, struct tpm_tis_spi_phy *phy, + int irq, const struct tpm_tis_phy_ops *phy_ops) +{ + phy->iobuf = devm_kmalloc(&spi->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL); + if (!phy->iobuf) + return -ENOMEM; + + phy->spi_device = spi; + + return tpm_tis_core_init(&spi->dev, &phy->priv, irq, phy_ops, NULL); +} + static const struct tpm_tis_phy_ops tpm_spi_phy_ops = { .read_bytes = tpm_tis_spi_read_bytes, .write_bytes = tpm_tis_spi_write_bytes, @@ -221,11 +224,6 @@ static int tpm_tis_spi_probe(struct spi_device *dev) if (!phy) return -ENOMEM; - phy->spi_device = dev; - - phy->iobuf = devm_kmalloc(&dev->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL); - if (!phy->iobuf) - return -ENOMEM; phy->flow_control = tpm_tis_spi_flow_control; /* If the SPI device has an IRQ then use that */ @@ -234,11 +232,27 @@ static int tpm_tis_spi_probe(struct spi_device *dev) else irq = -1; - return tpm_tis_core_init(&dev->dev, &phy->priv, irq, &tpm_spi_phy_ops, - NULL); + init_completion(&phy->ready); + return tpm_tis_spi_init(dev, phy, irq, &tpm_spi_phy_ops); +} + +typedef int (*tpm_tis_spi_probe_func)(struct spi_device *); + +static int tpm_tis_spi_driver_probe(struct spi_device *spi) +{ + const struct spi_device_id *spi_dev_id = spi_get_device_id(spi); + tpm_tis_spi_probe_func probe_func; + + probe_func = of_device_get_match_data(&spi->dev); + if (!probe_func && spi_dev_id) + probe_func = (tpm_tis_spi_probe_func)spi_dev_id->driver_data; + if (!probe_func) + return -ENODEV; + + return probe_func(spi); } -static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume); +static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_spi_resume); static int tpm_tis_spi_remove(struct spi_device *dev) { @@ -250,15 +264,17 @@ static int tpm_tis_spi_remove(struct spi_device *dev) } static const struct spi_device_id tpm_tis_spi_id[] = { - {"tpm_tis_spi", 0}, + { "tpm_tis_spi", (unsigned long)tpm_tis_spi_probe }, + { "cr50", (unsigned long)cr50_spi_probe }, {} }; MODULE_DEVICE_TABLE(spi, tpm_tis_spi_id); static const struct of_device_id of_tis_spi_match[] = { - { .compatible = "st,st33htpm-spi", }, - { .compatible = "infineon,slb9670", }, - { .compatible = "tcg,tpm_tis-spi", }, + { .compatible = "st,st33htpm-spi", .data = tpm_tis_spi_probe }, + { .compatible = "infineon,slb9670", .data = tpm_tis_spi_probe }, + { .compatible = "tcg,tpm_tis-spi", .data = tpm_tis_spi_probe }, + { .compatible = "google,cr50", .data = cr50_spi_probe }, {} }; MODULE_DEVICE_TABLE(of, of_tis_spi_match); @@ -277,7 +293,7 @@ static struct spi_driver tpm_tis_spi_driver = { .of_match_table = of_match_ptr(of_tis_spi_match), .acpi_match_table = ACPI_PTR(acpi_tis_spi_match), }, - .probe = tpm_tis_spi_probe, + .probe = tpm_tis_spi_driver_probe, .remove = tpm_tis_spi_remove, .id_table = tpm_tis_spi_id, }; diff --git a/drivers/char/tpm/tpm_tis_spi.h b/drivers/char/tpm/tpm_tis_spi.h new file mode 100644 index 000000000000..bba73979c368 --- /dev/null +++ b/drivers/char/tpm/tpm_tis_spi.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2015 Infineon Technologies AG + * Copyright (C) 2016 STMicroelectronics SAS + */ + +#ifndef TPM_TIS_SPI_H +#define TPM_TIS_SPI_H + +#include "tpm_tis_core.h" + +struct tpm_tis_spi_phy { + struct tpm_tis_data priv; + struct spi_device *spi_device; + int (*flow_control)(struct tpm_tis_spi_phy *phy, + struct spi_transfer *xfer); + struct completion ready; + unsigned long wake_after; + + u8 *iobuf; +}; + +static inline struct tpm_tis_spi_phy *to_tpm_tis_spi_phy(struct tpm_tis_data *data) +{ + return container_of(data, struct tpm_tis_spi_phy, priv); +} + +extern int tpm_tis_spi_init(struct spi_device *spi, struct tpm_tis_spi_phy *phy, + int irq, const struct tpm_tis_phy_ops *phy_ops); + +extern int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len, + u8 *in, const u8 *out); + +extern int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result); +extern int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result); +extern int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value); + +#ifdef CONFIG_TCG_TIS_SPI_CR50 +extern int cr50_spi_probe(struct spi_device *spi); +#else +static inline int cr50_spi_probe(struct spi_device *spi) +{ + return -ENODEV; +} +#endif + +#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_TCG_TIS_SPI_CR50) +extern int tpm_tis_spi_resume(struct device *dev); +#else +#define tpm_tis_spi_resume NULL +#endif + +#endif diff --git a/drivers/char/tpm/tpm_tis_spi_cr50.c b/drivers/char/tpm/tpm_tis_spi_cr50.c new file mode 100644 index 000000000000..37d72e818335 --- /dev/null +++ b/drivers/char/tpm/tpm_tis_spi_cr50.c @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 Google, Inc + * + * This device driver implements a TCG PTP FIFO interface over SPI for chips + * with Cr50 firmware. + * It is based on tpm_tis_spi driver by Peter Huewe and Christophe Ricard. + */ + +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/spi/spi.h> +#include <linux/wait.h> + +#include "tpm_tis_core.h" +#include "tpm_tis_spi.h" + +/* + * Cr50 timing constants: + * - can go to sleep not earlier than after CR50_SLEEP_DELAY_MSEC. + * - needs up to CR50_WAKE_START_DELAY_USEC to wake after sleep. + * - requires waiting for "ready" IRQ, if supported; or waiting for at least + * CR50_NOIRQ_ACCESS_DELAY_MSEC between transactions, if IRQ is not supported. + * - waits for up to CR50_FLOW_CONTROL for flow control 'ready' indication. + */ +#define CR50_SLEEP_DELAY_MSEC 1000 +#define CR50_WAKE_START_DELAY_USEC 1000 +#define CR50_NOIRQ_ACCESS_DELAY msecs_to_jiffies(2) +#define CR50_READY_IRQ_TIMEOUT msecs_to_jiffies(TPM2_TIMEOUT_A) +#define CR50_FLOW_CONTROL msecs_to_jiffies(TPM2_TIMEOUT_A) +#define MAX_IRQ_CONFIRMATION_ATTEMPTS 3 + +#define TPM_CR50_FW_VER(l) (0x0f90 | ((l) << 12)) +#define TPM_CR50_MAX_FW_VER_LEN 64 + +struct cr50_spi_phy { + struct tpm_tis_spi_phy spi_phy; + + struct mutex time_track_mutex; + unsigned long last_access; + + unsigned long access_delay; + + unsigned int irq_confirmation_attempt; + bool irq_needs_confirmation; + bool irq_confirmed; +}; + +static inline struct cr50_spi_phy *to_cr50_spi_phy(struct tpm_tis_spi_phy *phy) +{ + return container_of(phy, struct cr50_spi_phy, spi_phy); +} + +/* + * The cr50 interrupt handler just signals waiting threads that the + * interrupt was asserted. It does not do any processing triggered + * by interrupts but is instead used to avoid fixed delays. + */ +static irqreturn_t cr50_spi_irq_handler(int dummy, void *dev_id) +{ + struct cr50_spi_phy *cr50_phy = dev_id; + + cr50_phy->irq_confirmed = true; + complete(&cr50_phy->spi_phy.ready); + + return IRQ_HANDLED; +} + +/* + * Cr50 needs to have at least some delay between consecutive + * transactions. Make sure we wait. + */ +static void cr50_ensure_access_delay(struct cr50_spi_phy *phy) +{ + unsigned long allowed_access = phy->last_access + phy->access_delay; + unsigned long time_now = jiffies; + struct device *dev = &phy->spi_phy.spi_device->dev; + + /* + * Note: There is a small chance, if Cr50 is not accessed in a few days, + * that time_in_range will not provide the correct result after the wrap + * around for jiffies. In this case, we'll have an unneeded short delay, + * which is fine. + */ + if (time_in_range_open(time_now, phy->last_access, allowed_access)) { + unsigned long remaining, timeout = allowed_access - time_now; + + remaining = wait_for_completion_timeout(&phy->spi_phy.ready, + timeout); + if (!remaining && phy->irq_confirmed) + dev_warn(dev, "Timeout waiting for TPM ready IRQ\n"); + } + + if (phy->irq_needs_confirmation) { + unsigned int attempt = ++phy->irq_confirmation_attempt; + + if (phy->irq_confirmed) { + phy->irq_needs_confirmation = false; + phy->access_delay = CR50_READY_IRQ_TIMEOUT; + dev_info(dev, "TPM ready IRQ confirmed on attempt %u\n", + attempt); + } else if (attempt > MAX_IRQ_CONFIRMATION_ATTEMPTS) { + phy->irq_needs_confirmation = false; + dev_warn(dev, "IRQ not confirmed - will use delays\n"); + } + } +} + +/* + * Cr50 might go to sleep if there is no SPI activity for some time and + * miss the first few bits/bytes on the bus. In such case, wake it up + * by asserting CS and give it time to start up. + */ +static bool cr50_needs_waking(struct cr50_spi_phy *phy) +{ + /* + * Note: There is a small chance, if Cr50 is not accessed in a few days, + * that time_in_range will not provide the correct result after the wrap + * around for jiffies. In this case, we'll probably timeout or read + * incorrect value from TPM_STS and just retry the operation. + */ + return !time_in_range_open(jiffies, phy->last_access, + phy->spi_phy.wake_after); +} + +static void cr50_wake_if_needed(struct cr50_spi_phy *cr50_phy) +{ + struct tpm_tis_spi_phy *phy = &cr50_phy->spi_phy; + + if (cr50_needs_waking(cr50_phy)) { + /* Assert CS, wait 1 msec, deassert CS */ + struct spi_transfer spi_cs_wake = { .delay_usecs = 1000 }; + + spi_sync_transfer(phy->spi_device, &spi_cs_wake, 1); + /* Wait for it to fully wake */ + usleep_range(CR50_WAKE_START_DELAY_USEC, + CR50_WAKE_START_DELAY_USEC * 2); + } + + /* Reset the time when we need to wake Cr50 again */ + phy->wake_after = jiffies + msecs_to_jiffies(CR50_SLEEP_DELAY_MSEC); +} + +/* + * Flow control: clock the bus and wait for cr50 to set LSB before + * sending/receiving data. TCG PTP spec allows it to happen during + * the last byte of header, but cr50 never does that in practice, + * and earlier versions had a bug when it was set too early, so don't + * check for it during header transfer. + */ +static int cr50_spi_flow_control(struct tpm_tis_spi_phy *phy, + struct spi_transfer *spi_xfer) +{ + struct device *dev = &phy->spi_device->dev; + unsigned long timeout = jiffies + CR50_FLOW_CONTROL; + struct spi_message m; + int ret; + + spi_xfer->len = 1; + + do { + spi_message_init(&m); + spi_message_add_tail(spi_xfer, &m); + ret = spi_sync_locked(phy->spi_device, &m); + if (ret < 0) + return ret; + + if (time_after(jiffies, timeout)) { + dev_warn(dev, "Timeout during flow control\n"); + return -EBUSY; + } + } while (!(phy->iobuf[0] & 0x01)); + + return 0; +} + +static int tpm_tis_spi_cr50_transfer(struct tpm_tis_data *data, u32 addr, u16 len, + u8 *in, const u8 *out) +{ + struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data); + struct cr50_spi_phy *cr50_phy = to_cr50_spi_phy(phy); + int ret; + + mutex_lock(&cr50_phy->time_track_mutex); + /* + * Do this outside of spi_bus_lock in case cr50 is not the + * only device on that spi bus. + */ + cr50_ensure_access_delay(cr50_phy); + cr50_wake_if_needed(cr50_phy); + + ret = tpm_tis_spi_transfer(data, addr, len, in, out); + + cr50_phy->last_access = jiffies; + mutex_unlock(&cr50_phy->time_track_mutex); + + return ret; +} + +static int tpm_tis_spi_cr50_read_bytes(struct tpm_tis_data *data, u32 addr, + u16 len, u8 *result) +{ + return tpm_tis_spi_cr50_transfer(data, addr, len, result, NULL); +} + +static int tpm_tis_spi_cr50_write_bytes(struct tpm_tis_data *data, u32 addr, + u16 len, const u8 *value) +{ + return tpm_tis_spi_cr50_transfer(data, addr, len, NULL, value); +} + +static const struct tpm_tis_phy_ops tpm_spi_cr50_phy_ops = { + .read_bytes = tpm_tis_spi_cr50_read_bytes, + .write_bytes = tpm_tis_spi_cr50_write_bytes, + .read16 = tpm_tis_spi_read16, + .read32 = tpm_tis_spi_read32, + .write32 = tpm_tis_spi_write32, +}; + +static void cr50_print_fw_version(struct tpm_tis_data *data) +{ + struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data); + int i, len = 0; + char fw_ver[TPM_CR50_MAX_FW_VER_LEN + 1]; + char fw_ver_block[4]; + + /* + * Write anything to TPM_CR50_FW_VER to start from the beginning + * of the version string + */ + tpm_tis_write8(data, TPM_CR50_FW_VER(data->locality), 0); + + /* Read the string, 4 bytes at a time, until we get '\0' */ + do { + tpm_tis_read_bytes(data, TPM_CR50_FW_VER(data->locality), 4, + fw_ver_block); + for (i = 0; i < 4 && fw_ver_block[i]; ++len, ++i) + fw_ver[len] = fw_ver_block[i]; + } while (i == 4 && len < TPM_CR50_MAX_FW_VER_LEN); + fw_ver[len] = '\0'; + + dev_info(&phy->spi_device->dev, "Cr50 firmware version: %s\n", fw_ver); +} + +int cr50_spi_probe(struct spi_device *spi) +{ + struct tpm_tis_spi_phy *phy; + struct cr50_spi_phy *cr50_phy; + int ret; + struct tpm_chip *chip; + + cr50_phy = devm_kzalloc(&spi->dev, sizeof(*cr50_phy), GFP_KERNEL); + if (!cr50_phy) + return -ENOMEM; + + phy = &cr50_phy->spi_phy; + phy->flow_control = cr50_spi_flow_control; + phy->wake_after = jiffies; + init_completion(&phy->ready); + + cr50_phy->access_delay = CR50_NOIRQ_ACCESS_DELAY; + cr50_phy->last_access = jiffies; + mutex_init(&cr50_phy->time_track_mutex); + + if (spi->irq > 0) { + ret = devm_request_irq(&spi->dev, spi->irq, + cr50_spi_irq_handler, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "cr50_spi", cr50_phy); + if (ret < 0) { + if (ret == -EPROBE_DEFER) + return ret; + dev_warn(&spi->dev, "Requesting IRQ %d failed: %d\n", + spi->irq, ret); + /* + * This is not fatal, the driver will fall back to + * delays automatically, since ready will never + * be completed without a registered irq handler. + * So, just fall through. + */ + } else { + /* + * IRQ requested, let's verify that it is actually + * triggered, before relying on it. + */ + cr50_phy->irq_needs_confirmation = true; + } + } else { + dev_warn(&spi->dev, + "No IRQ - will use delays between transactions.\n"); + } + + ret = tpm_tis_spi_init(spi, phy, -1, &tpm_spi_cr50_phy_ops); + if (ret) + return ret; + + cr50_print_fw_version(&phy->priv); + + chip = dev_get_drvdata(&spi->dev); + chip->flags |= TPM_CHIP_FLAG_FIRMWARE_POWER_MANAGED; + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +int tpm_tis_spi_resume(struct device *dev) +{ + struct tpm_chip *chip = dev_get_drvdata(dev); + struct tpm_tis_data *data = dev_get_drvdata(&chip->dev); + struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data); + /* + * Jiffies not increased during suspend, so we need to reset + * the time to wake Cr50 after resume. + */ + phy->wake_after = jiffies; + + return tpm_tis_resume(dev); +} +#endif |