summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/spi/pxa2xx6
-rw-r--r--arch/arm/mach-pxa/cm-x300.c9
-rw-r--r--arch/arm/mach-pxa/colibri-pxa270-income.c9
-rw-r--r--arch/arm/mach-pxa/devices.c20
-rw-r--r--arch/arm/mach-pxa/ezx.c9
-rw-r--r--arch/arm/mach-pxa/hx4700.c3
-rw-r--r--arch/arm/mach-pxa/icontrol.c2
-rw-r--r--arch/arm/mach-pxa/include/mach/magician.h70
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa27x.h2
-rw-r--r--arch/arm/mach-pxa/lpd270.c9
-rw-r--r--arch/arm/mach-pxa/magician.c680
-rw-r--r--arch/arm/mach-pxa/mainstone.c19
-rw-r--r--arch/arm/mach-pxa/mioa701.c11
-rw-r--r--arch/arm/mach-pxa/palm27x.c9
-rw-r--r--arch/arm/mach-pxa/palmtc.c9
-rw-r--r--arch/arm/mach-pxa/palmte2.c9
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c9
-rw-r--r--arch/arm/mach-pxa/pxa27x.c2
-rw-r--r--arch/arm/mach-pxa/raumfeld.c21
-rw-r--r--arch/arm/mach-pxa/tavorevb.c13
-rw-r--r--arch/arm/mach-pxa/viper.c9
-rw-r--r--arch/arm/mach-pxa/z2.c15
-rw-r--r--arch/arm/mach-pxa/zylonite.c9
-rw-r--r--include/linux/spi/pxa2xx_spi.h1
24 files changed, 608 insertions, 347 deletions
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index 3352f97430e4..13a0b7fb192f 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -22,15 +22,10 @@ Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
found in include/linux/spi/pxa2xx_spi.h:
struct pxa2xx_spi_master {
- u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;
};
-The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the
-corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See
-the "PXA2xx Developer Manual" section "Clocks and Power Management".
-
The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
slave device (chips) attached to this SPI master.
@@ -57,7 +52,6 @@ static struct resource pxa_spi_nssp_resources[] = {
};
static struct pxa2xx_spi_master pxa_nssp_master_info = {
- .clock_enable = CKEN_NSSP, /* NSSP Peripheral clock */
.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
.enable_dma = 1, /* Enables NSSP DMA */
};
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 5851f4c254c1..a7dae60810e8 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -26,6 +26,7 @@
#include <linux/dm9000.h>
#include <linux/leds.h>
#include <linux/rtc-v3020.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
@@ -305,11 +306,14 @@ static inline void cm_x300_init_lcd(void) {}
#endif
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup cm_x300_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data cm_x300_backlight_data = {
- .pwm_id = 2,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 10000,
.enable_gpio = -1,
};
@@ -323,6 +327,7 @@ static struct platform_device cm_x300_backlight_device = {
static void cm_x300_init_bl(void)
{
+ pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
platform_device_register(&cm_x300_backlight_device);
}
#else
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 3aa264640c9d..db20d25daaab 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -20,6 +20,7 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c/pxa-i2c.h>
@@ -184,11 +185,14 @@ static inline void income_lcd_init(void) {}
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup income_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data income_backlight_data = {
- .pwm_id = 0,
.max_brightness = 0x3ff,
.dft_brightness = 0x1ff,
- .pwm_period_ns = 1000000,
.enable_gpio = -1,
};
@@ -202,6 +206,7 @@ static struct platform_device income_backlight = {
static void __init income_pwm_init(void)
{
+ pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
platform_device_register(&income_backlight);
}
#else
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index c62473235a13..2a6e0ae2b920 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -395,6 +395,26 @@ static struct resource pxa_ir_resources[] = {
.end = IRQ_ICP,
.flags = IORESOURCE_IRQ,
},
+ [3] = {
+ .start = 0x40800000,
+ .end = 0x4080001b,
+ .flags = IORESOURCE_MEM,
+ },
+ [4] = {
+ .start = 0x40700000,
+ .end = 0x40700023,
+ .flags = IORESOURCE_MEM,
+ },
+ [5] = {
+ .start = 17,
+ .end = 17,
+ .flags = IORESOURCE_DMA,
+ },
+ [6] = {
+ .start = 18,
+ .end = 18,
+ .flags = IORESOURCE_DMA,
+ },
};
struct platform_device pxa_device_ficp = {
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index ab93441e596e..9a9c15bfcd34 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/input.h>
#include <linux/gpio.h>
@@ -49,11 +50,14 @@
#define GPIO19_GEN1_CAM_RST 19
#define GPIO28_GEN2_CAM_RST 28
+static struct pwm_lookup ezx_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data ezx_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
};
@@ -817,6 +821,7 @@ static void __init a780_init(void)
platform_device_register(&a780_camera);
}
+ pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a780_devices));
}
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 5fb41ad6e3bc..b076a835eb21 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -557,10 +557,8 @@ static struct platform_device hx4700_lcd = {
*/
static struct platform_pwm_backlight_data backlight_data = {
- .pwm_id = -1, /* Superseded by pwm_lookup */
.max_brightness = 200,
.dft_brightness = 100,
- .pwm_period_ns = 30923,
.enable_gpio = -1,
};
@@ -630,7 +628,6 @@ static struct spi_board_info tsc2046_board_info[] __initdata = {
static struct pxa2xx_spi_master pxa_ssp2_master_info = {
.num_chipselect = 1,
- .clock_enable = CKEN_SSP2,
.enable_dma = 1,
};
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 9b0eb0252af6..a1869f9b6219 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -116,13 +116,11 @@ static struct spi_board_info mcp251x_board_info[] = {
};
static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
- .clock_enable = CKEN_SSP3,
.num_chipselect = 2,
.enable_dma = 1
};
static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
- .clock_enable = CKEN_SSP4,
.num_chipselect = 2,
.enable_dma = 1
};
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index ba6a6e1d29e9..5f6b850ebe33 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -52,9 +52,9 @@
#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101
#define GPIO102_MAGICIAN_KEY_PHONE 102
#define GPIO103_MAGICIAN_LED_KP 103
-#define GPIO104_MAGICIAN_LCD_POWER_1 104
-#define GPIO105_MAGICIAN_LCD_POWER_2 105
-#define GPIO106_MAGICIAN_LCD_POWER_3 106
+#define GPIO104_MAGICIAN_LCD_VOFF_EN 104
+#define GPIO105_MAGICIAN_LCD_VON_EN 105
+#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106
#define GPIO107_MAGICIAN_DS1WM_IRQ 107
#define GPIO108_MAGICIAN_GSM_READY 108
#define GPIO114_MAGICIAN_UNKNOWN 114
@@ -78,43 +78,51 @@
* CPLD EGPIOs
*/
-#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
+#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
#define MAGICIAN_EGPIO(reg,bit) \
(MAGICIAN_EGPIO_BASE + 8*reg + bit)
/* output */
-#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
+#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6)
+#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
/* input */
-#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1)
+/* USB or AC charger type */
+#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0)
+/*
+ * Vbus is detected
+ * FIXME behaves like (6,3), may differ for host/device
+ */
+#define EGPIO_MAGICIAN_CABLE_VBUS MAGICIAN_EGPIO(4, 1)
-#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
+#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
-#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
+#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
+/* FIXME behaves like (4,1), may differ for host/device */
+#define EGPIO_MAGICIAN_CABLE_INSERTED MAGICIAN_EGPIO(6, 3)
#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 599b925a657c..1a4291936c58 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -19,7 +19,7 @@
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-extern int __init pxa27x_set_pwrmode(unsigned int mode);
+extern int pxa27x_set_pwrmode(unsigned int mode);
extern void pxa27x_cpu_pm_enter(suspend_state_t state);
#endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 4823d972e647..5fcd4f094900 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -23,6 +23,7 @@
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
@@ -271,11 +272,14 @@ static struct platform_device lpd270_flash_device[2] = {
},
};
+static struct pwm_lookup lpd270_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data lpd270_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1,
.dft_brightness = 1,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
};
@@ -474,6 +478,7 @@ static void __init lpd270_init(void)
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
+ pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index a9761c293028..896b268c3ab7 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -24,8 +24,10 @@
#include <linux/mfd/htc-pasic3.h>
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
@@ -43,6 +45,12 @@
#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/regulator/max1586.h>
+
+#include <linux/platform_data/pxa2xx_udc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
#include "devices.h"
#include "generic.h"
@@ -52,36 +60,36 @@ static unsigned long magician_pin_config[] __initdata = {
GPIO20_nSDCS_2,
GPIO21_nSDCS_3,
GPIO15_nCS_1,
- GPIO78_nCS_2, /* PASIC3 */
- GPIO79_nCS_3, /* EGPIO CPLD */
+ GPIO78_nCS_2, /* PASIC3 */
+ GPIO79_nCS_3, /* EGPIO CPLD */
GPIO80_nCS_4,
GPIO33_nCS_5,
- /* I2C */
+ /* I2C UDA1380 + OV9640 */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
- /* PWM 0 */
+ /* PWM 0 - LCD backlight */
GPIO16_PWM0_OUT,
- /* I2S */
+ /* I2S UDA1380 capture */
GPIO28_I2S_BITCLK_OUT,
GPIO29_I2S_SDATA_IN,
GPIO31_I2S_SYNC,
GPIO113_I2S_SYSCLK,
- /* SSP 1 */
+ /* SSP 1 UDA1380 playback */
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO25_SSP1_TXD,
- /* SSP 2 */
+ /* SSP 2 TSC2046 touchscreen */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
- /* MMC */
+ /* MMC/SD/SDHC slot */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
@@ -92,7 +100,7 @@ static unsigned long magician_pin_config[] __initdata = {
/* LCD */
GPIOxx_LCD_TFT_16BPP,
- /* QCI */
+ /* QCI camera interface */
GPIO12_CIF_DD_7,
GPIO17_CIF_DD_6,
GPIO50_CIF_DD_3,
@@ -120,12 +128,13 @@ static unsigned long magician_pin_config[] __initdata = {
};
/*
- * IRDA
+ * IrDA
*/
static struct pxaficp_platform_data magician_ficp_info = {
.gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
.transceiver_cap = IR_SIRMODE | IR_OFF,
+ .gpio_pwdown_inverted = 0,
};
/*
@@ -134,11 +143,11 @@ static struct pxaficp_platform_data magician_ficp_info = {
#define INIT_KEY(_code, _gpio, _desc) \
{ \
- .code = KEY_##_code, \
- .gpio = _gpio, \
- .desc = _desc, \
- .type = EV_KEY, \
- .wakeup = 1, \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
}
static struct gpio_keys_button magician_button_table[] = {
@@ -160,164 +169,162 @@ static struct gpio_keys_button magician_button_table[] = {
};
static struct gpio_keys_platform_data gpio_keys_data = {
- .buttons = magician_button_table,
- .nbuttons = ARRAY_SIZE(magician_button_table),
+ .buttons = magician_button_table,
+ .nbuttons = ARRAY_SIZE(magician_button_table),
};
static struct platform_device gpio_keys = {
- .name = "gpio-keys",
- .dev = {
+ .name = "gpio-keys",
+ .dev = {
.platform_data = &gpio_keys_data,
},
- .id = -1,
+ .id = -1,
};
-
/*
* EGPIO (Xilinx CPLD)
*
- * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
+ * 32-bit aligned 8-bit registers
+ * 16 possible registers (reg windows size), only 7 used:
+ * 3x output, 1x irq, 3x input
*/
static struct resource egpio_resources[] = {
[0] = {
- .start = PXA_CS3_PHYS,
- .end = PXA_CS3_PHYS + 0x20 - 1,
- .flags = IORESOURCE_MEM,
+ .start = PXA_CS3_PHYS,
+ .end = PXA_CS3_PHYS + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
},
[1] = {
- .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
- .flags = IORESOURCE_IRQ,
+ .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+ .flags = IORESOURCE_IRQ,
},
};
static struct htc_egpio_chip egpio_chips[] = {
[0] = {
- .reg_start = 0,
- .gpio_base = MAGICIAN_EGPIO(0, 0),
- .num_gpios = 24,
- .direction = HTC_EGPIO_OUTPUT,
- .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
+ .reg_start = 0,
+ .gpio_base = MAGICIAN_EGPIO(0, 0),
+ .num_gpios = 24,
+ .direction = HTC_EGPIO_OUTPUT,
+ /*
+ * Depends on modules configuration
+ */
+ .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
},
[1] = {
- .reg_start = 4,
- .gpio_base = MAGICIAN_EGPIO(4, 0),
- .num_gpios = 24,
- .direction = HTC_EGPIO_INPUT,
+ .reg_start = 4,
+ .gpio_base = MAGICIAN_EGPIO(4, 0),
+ .num_gpios = 24,
+ .direction = HTC_EGPIO_INPUT,
},
};
static struct htc_egpio_platform_data egpio_info = {
- .reg_width = 8,
- .bus_width = 32,
- .irq_base = IRQ_BOARD_START,
- .num_irqs = 4,
- .ack_register = 3,
- .chip = egpio_chips,
- .num_chips = ARRAY_SIZE(egpio_chips),
+ .reg_width = 8,
+ .bus_width = 32,
+ .irq_base = IRQ_BOARD_START,
+ .num_irqs = 4,
+ .ack_register = 3,
+ .chip = egpio_chips,
+ .num_chips = ARRAY_SIZE(egpio_chips),
};
static struct platform_device egpio = {
- .name = "htc-egpio",
- .id = -1,
- .resource = egpio_resources,
- .num_resources = ARRAY_SIZE(egpio_resources),
+ .name = "htc-egpio",
+ .id = -1,
+ .resource = egpio_resources,
+ .num_resources = ARRAY_SIZE(egpio_resources),
.dev = {
.platform_data = &egpio_info,
},
};
/*
- * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
+ * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
*/
static struct pxafb_mode_info toppoly_modes[] = {
{
- .pixclock = 96153,
- .bpp = 16,
- .xres = 240,
- .yres = 320,
- .hsync_len = 11,
- .vsync_len = 3,
- .left_margin = 19,
- .upper_margin = 2,
- .right_margin = 10,
- .lower_margin = 2,
- .sync = 0,
+ .pixclock = 96153,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 11,
+ .vsync_len = 3,
+ .left_margin = 19,
+ .upper_margin = 2,
+ .right_margin = 10,
+ .lower_margin = 2,
+ .sync = 0,
},
};
static struct pxafb_mode_info samsung_modes[] = {
{
- .pixclock = 96153,
- .bpp = 16,
- .xres = 240,
- .yres = 320,
- .hsync_len = 8,
- .vsync_len = 4,
- .left_margin = 9,
- .upper_margin = 4,
- .right_margin = 9,
- .lower_margin = 4,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .pixclock = 226469,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 4,
+ .left_margin = 9,
+ .upper_margin = 4,
+ .right_margin = 9,
+ .lower_margin = 4,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
{
- pr_debug("Toppoly LCD power\n");
+ pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
if (on) {
- pr_debug("on\n");
gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
udelay(2000);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
udelay(2000);
/* FIXME: enable LCDC here */
udelay(2000);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
udelay(2000);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
} else {
- pr_debug("off\n");
msleep(15);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
udelay(500);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
udelay(1000);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
}
}
static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
{
- pr_debug("Samsung LCD power\n");
+ pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
if (on) {
- pr_debug("on\n");
if (system_rev < 3)
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
else
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
- mdelay(10);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
- mdelay(10);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
- mdelay(30);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
- mdelay(10);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
+ mdelay(6); /* Avdd -> Voff >5ms */
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
+ mdelay(16); /* Voff -> Von >(5+10)ms */
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
} else {
- pr_debug("off\n");
- mdelay(10);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
- mdelay(30);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
- mdelay(10);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
- mdelay(10);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
+ mdelay(16);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
+ mdelay(6);
if (system_rev < 3)
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
else
@@ -326,29 +333,43 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
}
static struct pxafb_mach_info toppoly_info = {
- .modes = toppoly_modes,
- .num_modes = 1,
- .fixed_modes = 1,
- .lcd_conn = LCD_COLOR_TFT_16BPP,
- .pxafb_lcd_power = toppoly_lcd_power,
+ .modes = toppoly_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+ .pxafb_lcd_power = toppoly_lcd_power,
};
static struct pxafb_mach_info samsung_info = {
- .modes = samsung_modes,
- .num_modes = 1,
- .fixed_modes = 1,
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
- LCD_ALTERNATE_MAPPING,
- .pxafb_lcd_power = samsung_lcd_power,
+ .modes = samsung_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
+ .pxafb_lcd_power = samsung_lcd_power,
};
/*
* Backlight
*/
+static struct pwm_lookup magician_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923,
+ PWM_POLARITY_NORMAL),
+};
+
+ /*
+ * fixed regulator for pwm_backlight
+ */
+
+static struct regulator_consumer_supply pwm_backlight_supply[] = {
+ REGULATOR_SUPPLY("power", "pwm_backlight"),
+};
+
+
static struct gpio magician_bl_gpios[] = {
- { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" },
- { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
+ { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" },
+ { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
};
static int magician_backlight_init(struct device *dev)
@@ -358,6 +379,7 @@ static int magician_backlight_init(struct device *dev)
static int magician_backlight_notify(struct device *dev, int brightness)
{
+ pr_debug("Brightness = %i\n", brightness);
gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
if (brightness >= 200) {
gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
@@ -373,28 +395,33 @@ static void magician_backlight_exit(struct device *dev)
gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
}
+/*
+ * LCD PWM backlight (main)
+ *
+ * MP1521 frequency should be:
+ * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
+ */
+
static struct platform_pwm_backlight_data backlight_data = {
- .pwm_id = 0,
- .max_brightness = 272,
- .dft_brightness = 100,
- .pwm_period_ns = 30923,
- .enable_gpio = -1,
- .init = magician_backlight_init,
- .notify = magician_backlight_notify,
- .exit = magician_backlight_exit,
+ .max_brightness = 272,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+ .init = magician_backlight_init,
+ .notify = magician_backlight_notify,
+ .exit = magician_backlight_exit,
};
static struct platform_device backlight = {
- .name = "pwm-backlight",
- .id = -1,
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &backlight_data,
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &backlight_data,
},
};
/*
- * LEDs
+ * GPIO LEDs, Phone keys backlight, vibra
*/
static struct gpio_led gpio_leds[] = {
@@ -416,69 +443,32 @@ static struct gpio_led_platform_data gpio_led_info = {
};
static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
.platform_data = &gpio_led_info,
},
};
-static struct pasic3_led pasic3_leds[] = {
- {
- .led = {
- .name = "magician:red",
- .default_trigger = "ds2760-battery.0-charging",
- },
- .hw_num = 0,
- .bit2 = PASIC3_BIT2_LED0,
- .mask = PASIC3_MASK_LED0,
- },
- {
- .led = {
- .name = "magician:green",
- .default_trigger = "ds2760-battery.0-charging-or-full",
- },
- .hw_num = 1,
- .bit2 = PASIC3_BIT2_LED1,
- .mask = PASIC3_MASK_LED1,
- },
- {
- .led = {
- .name = "magician:blue",
- .default_trigger = "bluetooth",
- },
- .hw_num = 2,
- .bit2 = PASIC3_BIT2_LED2,
- .mask = PASIC3_MASK_LED2,
- },
-};
-
-static struct pasic3_leds_machinfo pasic3_leds_info = {
- .num_leds = ARRAY_SIZE(pasic3_leds),
- .power_gpio = EGPIO_MAGICIAN_LED_POWER,
- .leds = pasic3_leds,
-};
-
/*
* PASIC3 with DS1WM
*/
static struct resource pasic3_resources[] = {
[0] = {
- .start = PXA_CS2_PHYS,
+ .start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 0x1b,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_MEM,
},
/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
[1] = {
- .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct pasic3_platform_data pasic3_platform_data = {
- .led_pdata = &pasic3_leds_info,
.clock_rate = 4000000,
};
@@ -493,25 +483,42 @@ static struct platform_device pasic3 = {
};
/*
- * USB "Transceiver"
+ * PXA UDC
+ */
+
+static void magician_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
+}
+
+static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
+ .udc_command = magician_udc_command,
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+};
+
+/*
+ * USB device VBus detection
*/
static struct resource gpio_vbus_resource = {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_MAGICIAN_VBUS,
- .end = IRQ_MAGICIAN_VBUS,
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
};
static struct gpio_vbus_mach_info gpio_vbus_info = {
- .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
- .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB,
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+ .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS,
};
static struct platform_device gpio_vbus = {
- .name = "gpio-vbus",
- .id = -1,
- .num_resources = 1,
- .resource = &gpio_vbus_resource,
+ .name = "gpio-vbus",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &gpio_vbus_resource,
.dev = {
.platform_data = &gpio_vbus_info,
},
@@ -521,19 +528,60 @@ static struct platform_device gpio_vbus = {
* External power
*/
-static int power_supply_init(struct device *dev)
+static int magician_supply_init(struct device *dev)
+{
+ int ret = -1;
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
+ if (ret) {
+ pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
+ goto err_ac;
+ }
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
+ if (ret) {
+ pr_err("Cannot request cable detection GPIO (%i)\n", ret);
+ goto err_usb;
+ }
+
+ return 0;
+
+err_usb:
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
+err_ac:
+ return ret;
+}
+
+static void magician_set_charge(int flags)
{
- return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+ if (flags & PDA_POWER_CHARGE_AC) {
+ pr_debug("Charging from AC\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else if (flags & PDA_POWER_CHARGE_USB) {
+ pr_debug("Charging from USB\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else {
+ pr_debug("Charging disabled\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
+ }
}
static int magician_is_ac_online(void)
{
- return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
+ return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+ gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
}
-static void power_supply_exit(struct device *dev)
+static int magician_is_usb_online(void)
{
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+ return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+ (!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
+}
+
+static void magician_supply_exit(struct device *dev)
+{
+ gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
}
static char *magician_supplicants[] = {
@@ -541,38 +589,40 @@ static char *magician_supplicants[] = {
};
static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = magician_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = magician_supplicants,
- .num_supplicants = ARRAY_SIZE(magician_supplicants),
+ .init = magician_supply_init,
+ .exit = magician_supply_exit,
+ .is_ac_online = magician_is_ac_online,
+ .is_usb_online = magician_is_usb_online,
+ .set_charge = magician_set_charge,
+ .supplied_to = magician_supplicants,
+ .num_supplicants = ARRAY_SIZE(magician_supplicants),
};
static struct resource power_supply_resources[] = {
[0] = {
- .name = "ac",
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
- IORESOURCE_IRQ_LOWEDGE,
- .start = IRQ_MAGICIAN_VBUS,
- .end = IRQ_MAGICIAN_VBUS,
+ .name = "ac",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
[1] = {
- .name = "usb",
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
- IORESOURCE_IRQ_LOWEDGE,
- .start = IRQ_MAGICIAN_VBUS,
- .end = IRQ_MAGICIAN_VBUS,
+ .name = "usb",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
};
static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
.platform_data = &power_supply_info,
},
- .resource = power_supply_resources,
- .num_resources = ARRAY_SIZE(power_supply_resources),
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
};
/*
@@ -586,11 +636,12 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
static struct regulator_init_data bq24022_init_data = {
.constraints = {
- .max_uA = 500000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+ .max_uA = 500000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT |
+ REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
- .consumer_supplies = bq24022_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
+ .consumer_supplies = bq24022_consumers,
};
static struct gpio bq24022_gpios[] = {
@@ -603,39 +654,85 @@ static struct gpio_regulator_state bq24022_states[] = {
};
static struct gpio_regulator_config bq24022_info = {
- .supply_name = "bq24022",
+ .supply_name = "bq24022",
- .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
- .enable_high = 0,
- .enabled_at_boot = 0,
+ .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+ .enable_high = 0,
+ .enabled_at_boot = 1,
- .gpios = bq24022_gpios,
- .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+ .gpios = bq24022_gpios,
+ .nr_gpios = ARRAY_SIZE(bq24022_gpios),
- .states = bq24022_states,
- .nr_states = ARRAY_SIZE(bq24022_states),
+ .states = bq24022_states,
+ .nr_states = ARRAY_SIZE(bq24022_states),
- .type = REGULATOR_CURRENT,
- .init_data = &bq24022_init_data,
+ .type = REGULATOR_CURRENT,
+ .init_data = &bq24022_init_data,
};
static struct platform_device bq24022 = {
- .name = "gpio-regulator",
- .id = -1,
- .dev = {
+ .name = "gpio-regulator",
+ .id = -1,
+ .dev = {
.platform_data = &bq24022_info,
},
};
/*
+ * Vcore regulator MAX1587A
+ */
+
+static struct regulator_consumer_supply magician_max1587a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data magician_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 700000,
+ .max_uV = 1475000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = magician_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers),
+};
+
+static struct max1586_subdev_data magician_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &magician_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data magician_max1587a_info = {
+ .subdevs = magician_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
+ /*
+ * NOTICE measured directly on the PCB (board_id == 0x3a), but
+ * if R24 is present, it will boost the voltage
+ * (write 1.475V, get 1.645V and smoke)
+ */
+ .v3_gain = MAX1586_GAIN_NO_R24,
+};
+
+static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &magician_max1587a_info,
+ },
+};
+
+/*
* MMC/SD
*/
static int magician_mci_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
+ irq_handler_t detect_irq, void *data)
{
return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
- "mmc card detect", data);
+ "mmc card detect", data);
}
static void magician_mci_exit(struct device *dev, void *data)
@@ -644,9 +741,9 @@ static void magician_mci_exit(struct device *dev, void *data)
}
static struct pxamci_platform_data magician_mci_info = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = magician_mci_init,
- .exit = magician_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = magician_mci_init,
+ .exit = magician_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY,
.gpio_card_ro_invert = 1,
@@ -660,47 +757,102 @@ static struct pxamci_platform_data magician_mci_info = {
static struct pxaohci_platform_data magician_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+ /* port1: CSR Bluetooth, port2: OTG with UDC */
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.power_budget = 0,
+ .power_on_delay = 100,
};
-
/*
* StrataFlash
*/
+static int magician_flash_init(struct platform_device *pdev)
+{
+ int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
+
+ if (ret) {
+ pr_err("Cannot request flash enable GPIO (%i)\n", ret);
+ return ret;
+ }
+
+ ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
+ if (ret) {
+ pr_err("Cannot set direction for flash enable (%i)\n", ret);
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+ }
+
+ return ret;
+}
+
static void magician_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
+static void magician_flash_exit(struct platform_device *pdev)
+{
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+}
+
static struct resource strataflash_resource = {
- .start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
};
+static struct mtd_partition magician_flash_parts[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x0,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE, /* EXPERIMENTAL */
+ },
+ {
+ .name = "Linux Kernel",
+ .offset = 0x40000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/*
+ * physmap-flash driver
+ */
+
static struct physmap_flash_data strataflash_data = {
- .width = 4,
- .set_vpp = magician_set_vpp,
+ .width = 4,
+ .init = magician_flash_init,
+ .set_vpp = magician_set_vpp,
+ .exit = magician_flash_exit,
+ .parts = magician_flash_parts,
+ .nr_parts = ARRAY_SIZE(magician_flash_parts),
};
static struct platform_device strataflash = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &strataflash_resource,
- .num_resources = 1,
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &strataflash_resource,
+ .num_resources = 1,
.dev = {
.platform_data = &strataflash_data,
},
};
/*
- * I2C
+ * PXA I2C main controller
*/
static struct i2c_pxa_platform_data i2c_info = {
- .fast_mode = 1,
+ /* OV9640 I2C device doesn't support fast mode */
+ .fast_mode = 0,
+};
+
+/*
+ * PXA I2C power controller
+ */
+
+static struct i2c_pxa_platform_data magician_i2c_power_info = {
+ .fast_mode = 1,
};
/*
@@ -720,12 +872,13 @@ static struct platform_device *devices[] __initdata = {
};
static struct gpio magician_global_gpios[] = {
- { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
+ { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
- { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
- { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
- { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
- { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
+
+ /* NOTICE valid LCD init sequence */
+ { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
+ { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
+ { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
};
static void __init magician_init(void)
@@ -737,44 +890,55 @@ static void __init magician_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
if (err)
- pr_err("magician: Failed to request GPIOs: %d\n", err);
+ pr_err("magician: Failed to request global GPIOs: %d\n", err);
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- platform_add_devices(ARRAY_AND_SIZE(devices));
+ pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
pxa_set_ficp_info(&magician_ficp_info);
- pxa27x_set_i2c_power_info(NULL);
+ pxa27x_set_i2c_power_info(&magician_i2c_power_info);
pxa_set_i2c_info(&i2c_info);
+
+ i2c_register_board_info(1,
+ ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
+ pxa_set_udc_info(&magician_udc_info);
/* Check LCD type we have */
cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
if (cpld) {
- u8 board_id = __raw_readb(cpld+0x14);
+ u8 board_id = __raw_readb(cpld + 0x14);
+
iounmap(cpld);
system_rev = board_id & 0x7;
lcd_select = board_id & 0x8;
pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
if (lcd_select && (system_rev < 3))
+ /* NOTICE valid LCD init sequence */
gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
- GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
- pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
+ GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
+ pxa_set_fb_info(NULL,
+ lcd_select ? &samsung_info : &toppoly_info);
} else
pr_err("LCD detection: CPLD mapping failed\n");
-}
+ regulator_register_always_on(0, "power", pwm_backlight_supply,
+ ARRAY_SIZE(pwm_backlight_supply), 5000000);
+
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+}
MACHINE_START(MAGICIAN, "HTC Magician")
- .atag_offset = 0x100,
- .map_io = pxa27x_map_io,
- .nr_irqs = MAGICIAN_NR_IRQS,
- .init_irq = pxa27x_init_irq,
- .handle_irq = pxa27x_handle_irq,
- .init_machine = magician_init,
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = MAGICIAN_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_machine = magician_init,
.init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 2c0658cf6be2..c3a87c176d72 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,6 +26,7 @@
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <linux/i2c/pxa-i2c.h>
@@ -248,11 +249,14 @@ static struct platform_device mst_flash_device[2] = {
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup mainstone_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data mainstone_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
};
@@ -266,9 +270,16 @@ static struct platform_device mainstone_backlight_device = {
static void __init mainstone_backlight_register(void)
{
- int ret = platform_device_register(&mainstone_backlight_device);
- if (ret)
+ int ret;
+
+ pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
+
+ ret = platform_device_register(&mainstone_backlight_device);
+ if (ret) {
printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
+ pwm_remove_table(mainstone_pwm_lookup,
+ ARRAY_SIZE(mainstone_pwm_lookup));
+ }
}
#else
#define mainstone_backlight_register() do { } while (0)
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 29997bde277d..3b52b1aa0659 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -26,6 +26,7 @@
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/rtc.h>
#include <linux/leds.h>
@@ -181,12 +182,15 @@ static unsigned long mioa701_pin_config[] = {
MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
};
+static struct pwm_lookup mioa701_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
+ PWM_POLARITY_NORMAL),
+};
+
/* LCD Screen and Backlight */
static struct platform_pwm_backlight_data mioa701_backlight_data = {
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 50,
- .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */
.enable_gpio = -1,
};
@@ -678,6 +682,7 @@ MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
+MIO_SIMPLE_DEV(wm9713_acodec, "wm9713-codec", NULL);
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink);
@@ -685,6 +690,7 @@ static struct platform_device *devices[] __initdata = {
&mioa701_gpio_keys,
&mioa701_backlight,
&mioa701_led,
+ &wm9713_acodec,
&pxa2xx_pcm,
&mioa701_sound,
&power_dev,
@@ -751,6 +757,7 @@ static void __init mioa701_machine_init(void)
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
+ pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index e54a296fb81f..13eba2b26e0a 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -15,6 +15,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx.h>
@@ -270,6 +271,11 @@ void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palm27x_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
+ PWM_POLARITY_NORMAL),
+};
+
static int palm_bl_power;
static int palm_lcd_power;
@@ -318,10 +324,8 @@ static void palm27x_backlight_exit(struct device *dev)
}
static struct platform_pwm_backlight_data palm27x_backlight_data = {
- .pwm_id = 0,
.max_brightness = 0xfe,
.dft_brightness = 0x7e,
- .pwm_period_ns = 3500 * 1024,
.enable_gpio = -1,
.init = palm27x_backlight_init,
.notify = palm27x_backlight_notify,
@@ -340,6 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd)
{
palm_bl_power = bl;
palm_lcd_power = lcd;
+ pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
platform_device_register(&palm27x_backlight);
}
#endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 7691c974ca4b..aebf6de62468 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/input.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
@@ -166,11 +167,14 @@ static inline void palmtc_keys_init(void) {}
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palmtc_pwm_lookup[] = {
+ PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
+ PWM_PERIOD_NORMAL),
+};
+
static struct platform_pwm_backlight_data palmtc_backlight_data = {
- .pwm_id = 1,
.max_brightness = PALMTC_MAX_INTENSITY,
.dft_brightness = PALMTC_MAX_INTENSITY,
- .pwm_period_ns = PALMTC_PERIOD_NS,
.enable_gpio = GPIO_NR_PALMTC_BL_POWER,
};
@@ -184,6 +188,7 @@ static struct platform_device palmtc_backlight = {
static void __init palmtc_pwm_init(void)
{
+ pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
platform_device_register(&palmtc_backlight);
}
#else
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 956fd24ee6fd..e64bb4326e69 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -21,6 +21,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx.h>
@@ -138,6 +139,11 @@ static struct platform_device palmte2_pxa_keys = {
/******************************************************************************
* Backlight
******************************************************************************/
+static struct pwm_lookup palmte2_pwm_lookup[] = {
+ PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
+ PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
+};
+
static struct gpio palmte_bl_gpios[] = {
{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
@@ -161,10 +167,8 @@ static void palmte2_backlight_exit(struct device *dev)
}
static struct platform_pwm_backlight_data palmte2_backlight_data = {
- .pwm_id = 0,
.max_brightness = PALMTE2_MAX_INTENSITY,
.dft_brightness = PALMTE2_MAX_INTENSITY,
- .pwm_period_ns = PALMTE2_PERIOD_NS,
.enable_gpio = -1,
.init = palmte2_backlight_init,
.notify = palmte2_backlight_notify,
@@ -355,6 +359,7 @@ static void __init palmte2_init(void)
pxa_set_ac97_info(&palmte2_ac97_pdata);
pxa_set_ficp_info(&palmte2_ficp_platform_data);
+ pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index d8319b54299a..b71c96f614f9 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <media/mt9v022.h>
@@ -148,11 +149,14 @@ static struct pxafb_mach_info pcm990_fbinfo __initdata = {
};
#endif
+static struct pwm_lookup pcm990_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data pcm990_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
};
@@ -542,6 +546,7 @@ void __init pcm990_baseboard_init(void)
#ifndef CONFIG_PCM990_DISPLAY_NONE
pxa_set_fb_info(NULL, &pcm990_fbinfo);
#endif
+ pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
platform_device_register(&pcm990_backlight_device);
/* MMC */
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 221260d5d109..ffc424028557 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
*/
static unsigned int pwrmode = PWRMODE_SLEEP;
-int __init pxa27x_set_pwrmode(unsigned int mode)
+int pxa27x_set_pwrmode(unsigned int mode)
{
switch (mode) {
case PWRMODE_SLEEP:
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 88f70c37ad0d..36571a9a44fe 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -29,6 +29,7 @@
#include <linux/leds.h>
#include <linux/w1-gpio.h>
#include <linux/sched.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
@@ -507,7 +508,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
.ext_pullup_enable_pin = -EINVAL,
};
-struct platform_device raumfeld_w1_gpio_device = {
+static struct platform_device raumfeld_w1_gpio_device = {
.name = "w1-gpio",
.dev = {
.platform_data = &w1_gpio_platform_data
@@ -531,13 +532,15 @@ static void __init raumfeld_w1_init(void)
* Framebuffer device
*/
+static struct pwm_lookup raumfeld_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
+ PWM_POLARITY_NORMAL),
+};
+
/* PWM controlled backlight */
static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
- /* 10000 ns = 10 ms ^= 100 kHz */
- .pwm_period_ns = 10000,
.enable_gpio = -1,
};
@@ -618,6 +621,8 @@ static void __init raumfeld_lcd_init(void)
} else {
mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+ pwm_add_table(raumfeld_pwm_lookup,
+ ARRAY_SIZE(raumfeld_pwm_lookup));
platform_device_register(&raumfeld_pwm_backlight_device);
}
@@ -629,7 +634,7 @@ static void __init raumfeld_lcd_init(void)
* SPI devices
*/
-struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
.sck = GPIO_SPI_CLK,
.mosi = GPIO_SPI_MOSI,
.miso = GPIO_SPI_MISO,
@@ -848,7 +853,7 @@ static void __init raumfeld_power_init(void)
static struct regulator_consumer_supply audio_va_consumer_supply =
REGULATOR_SUPPLY("va", "0-0048");
-struct regulator_init_data audio_va_initdata = {
+static struct regulator_init_data audio_va_initdata = {
.consumer_supplies = &audio_va_consumer_supply,
.num_consumer_supplies = 1,
.constraints = {
@@ -880,7 +885,7 @@ static struct regulator_consumer_supply audio_dummy_supplies[] = {
REGULATOR_SUPPLY("vlc", "0-0048"),
};
-struct regulator_init_data audio_dummy_initdata = {
+static struct regulator_init_data audio_dummy_initdata = {
.consumer_supplies = audio_dummy_supplies,
.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
.constraints = {
@@ -928,7 +933,7 @@ static struct regulator_init_data vcc_mmc_init_data = {
.num_consumer_supplies = 1,
};
-struct max8660_subdev_data max8660_v6_subdev_data = {
+static struct max8660_subdev_data max8660_v6_subdev_data = {
.id = MAX8660_V6,
.name = "vmmc",
.platform_data = &vcc_mmc_init_data,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index a71da84e784b..349a13a76215 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -18,6 +18,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/smc91x.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <asm/mach-types.h>
@@ -168,21 +169,24 @@ static inline void tavorevb_init_keypad(void) {}
#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup tavorevb_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000,
+ PWM_POLARITY_NORMAL),
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
[0] = {
/* primary backlight */
- .pwm_id = 2,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 100000,
.enable_gpio = -1,
},
[1] = {
/* secondary backlight */
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 100000,
.enable_gpio = -1,
},
};
@@ -470,6 +474,7 @@ static struct pxafb_mach_info tavorevb_lcd_info = {
static void __init tavorevb_init_lcd(void)
{
+ pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup));
platform_device_register(&tavorevb_backlight_devices[0]);
platform_device_register(&tavorevb_backlight_devices[1]);
pxa_set_fb_info(NULL, &tavorevb_lcd_info);
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 8ab26370107e..7ecc61ad2bed 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -39,6 +39,7 @@
#include <linux/i2c/pxa-i2c.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/usb/isp116x.h>
#include <linux/mtd/mtd.h>
@@ -350,6 +351,11 @@ static struct pxafb_mach_info fb_info = {
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
+static struct pwm_lookup viper_pwm_lookup[] = {
+ PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+ PWM_POLARITY_NORMAL),
+};
+
static int viper_backlight_init(struct device *dev)
{
int ret;
@@ -398,10 +404,8 @@ static void viper_backlight_exit(struct device *dev)
}
static struct platform_pwm_backlight_data viper_backlight_data = {
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 1000000,
.enable_gpio = -1,
.init = viper_backlight_init,
.notify = viper_backlight_notify,
@@ -939,6 +943,7 @@ static void __init viper_init(void)
smc91x_device.num_resources--;
pxa_set_i2c_info(NULL);
+ pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
viper_init_vcore_gpios();
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index e1a121b36cfa..d9899d73e46b 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/z2_battery.h>
#include <linux/dma-mapping.h>
@@ -199,21 +200,24 @@ static inline void z2_nor_init(void) {}
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup z2_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
+ PWM_POLARITY_NORMAL),
+ PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data z2_backlight_data[] = {
[0] = {
/* Keypad Backlight */
- .pwm_id = 1,
.max_brightness = 1023,
.dft_brightness = 0,
- .pwm_period_ns = 1260320,
.enable_gpio = -1,
},
[1] = {
/* LCD Backlight */
- .pwm_id = 2,
.max_brightness = 1023,
.dft_brightness = 512,
- .pwm_period_ns = 1260320,
.enable_gpio = -1,
},
};
@@ -236,6 +240,7 @@ static struct platform_device z2_backlight_devices[2] = {
};
static void __init z2_pwm_init(void)
{
+ pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
platform_device_register(&z2_backlight_devices[0]);
platform_device_register(&z2_backlight_devices[1]);
}
@@ -595,13 +600,11 @@ static struct spi_board_info spi_board_info[] __initdata = {
};
static struct pxa2xx_spi_master pxa_ssp1_master_info = {
- .clock_enable = CKEN_SSP,
.num_chipselect = 1,
.enable_dma = 1,
};
static struct pxa2xx_spi_master pxa_ssp2_master_info = {
- .clock_enable = CKEN_SSP2,
.num_chipselect = 1,
};
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 77daea478e88..e20359a7433c 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
@@ -120,11 +121,14 @@ static inline void zylonite_init_leds(void) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup zylonite_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data zylonite_backlight_data = {
- .pwm_id = 3,
.max_brightness = 100,
.dft_brightness = 100,
- .pwm_period_ns = 10000,
.enable_gpio = -1,
};
@@ -206,6 +210,7 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = {
static void __init zylonite_init_lcd(void)
{
+ pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
platform_device_register(&zylonite_backlight_device);
if (lcd_id & 0x20) {
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index 6d36dacec4ba..9ec4c147abbc 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -23,7 +23,6 @@ struct dma_chan;
/* device.platform_data for SSP controller devices */
struct pxa2xx_spi_master {
- u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;