summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.yaml6
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml42
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.yaml1
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.yaml23
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.yaml4
-rw-r--r--Documentation/devicetree/bindings/arm/qcom.yaml12
-rw-r--r--Documentation/devicetree/bindings/arm/renesas.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.yaml5
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi.yaml19
-rw-r--r--Documentation/devicetree/bindings/arm/tegra.yaml8
-rw-r--r--Documentation/devicetree/bindings/arm/xilinx.yaml6
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel-simple.yaml19
-rw-r--r--Documentation/devicetree/bindings/firmware/qcom,scm.txt2
-rw-r--r--Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml3
-rw-r--r--Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml12
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml3
-rw-r--r--Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml3
-rw-r--r--Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml5
-rw-r--r--Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml86
-rw-r--r--Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt25
-rw-r--r--Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml59
-rw-r--r--Documentation/devicetree/bindings/sram/sram.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,dwc3.yaml1
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml12
-rw-r--r--Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml1
-rw-r--r--MAINTAINERS3
-rw-r--r--arch/arm/boot/dts/Makefile23
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts13
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts14
-rw-r--r--arch/arm/boot/dts/am335x-icev2.dts14
-rw-r--r--arch/arm/boot/dts/am335x-myirtech-myc.dtsi267
-rw-r--r--arch/arm/boot/dts/am335x-myirtech-myd.dts536
-rw-r--r--arch/arm/boot/dts/am33xx-l4.dtsi49
-rw-r--r--arch/arm/boot/dts/am574x-idk.dts4
-rw-r--r--arch/arm/boot/dts/armada-385-linksys.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-388-helios4.dts28
-rw-r--r--arch/arm/boot/dts/aspeed-ast2600-evb.dts8
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts2
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts558
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts10
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts775
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts3
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts37
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts16
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts5
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts2
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts137
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi1
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi1
-rw-r--r--arch/arm/boot/dts/aspeed-g6.dtsi1
-rw-r--r--arch/arm/boot/dts/at91-kizbox3_common.dtsi1
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1_ek.dts1
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi22
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts1
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_icp.dts1
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts1
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts1
-rw-r--r--arch/arm/boot/dts/bcm21664.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm2711-rpi-4-b.dts17
-rw-r--r--arch/arm/boot/dts/bcm2711.dtsi31
-rw-r--r--arch/arm/boot/dts/berlin2.dtsi12
-rw-r--r--arch/arm/boot/dts/berlin2cd-google-chromecast.dts6
-rw-r--r--arch/arm/boot/dts/berlin2cd.dtsi12
-rw-r--r--arch/arm/boot/dts/berlin2q.dtsi12
-rw-r--r--arch/arm/boot/dts/dra71-evm.dts2
-rw-r--r--arch/arm/boot/dts/dra76x.dtsi36
-rw-r--r--arch/arm/boot/dts/e60k02.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos3250-artik5.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos3250-monk.dts2
-rw-r--r--arch/arm/boot/dts/exynos3250-rinato.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210-i9100.dts30
-rw-r--r--arch/arm/boot/dts/exynos5250-spring.dts2
-rw-r--r--arch/arm/boot/dts/exynos5420-arndale-octa.dts2
-rw-r--r--arch/arm/boot/dts/exynos5422-odroid-core.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos54xx.dtsi6
-rw-r--r--arch/arm/boot/dts/imx28.dtsi10
-rw-r--r--arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6dl-plybas.dts394
-rw-r--r--arch/arm/boot/dts/imx6dl-plym2m.dts446
-rw-r--r--arch/arm/boot/dts/imx6dl-prtmvt.dts852
-rw-r--r--arch/arm/boot/dts/imx6dl-victgo.dts852
-rw-r--r--arch/arm/boot/dts/imx6dl-vicut1.dts13
-rw-r--r--arch/arm/boot/dts/imx6q-vicut1.dts17
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi20
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabreauto.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-sr-som.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-vicut1.dtsi803
-rw-r--r--arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi42
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi25
-rw-r--r--arch/arm/boot/dts/imx6qp-vicutp.dts13
-rw-r--r--arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts18
-rw-r--r--arch/arm/boot/dts/imx6sl-tolino-shine3.dts15
-rw-r--r--arch/arm/boot/dts/imx6sll-kobo-clarahd.dts13
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dtsi54
-rw-r--r--arch/arm/boot/dts/imx6ul-prti6g.dts356
-rw-r--r--arch/arm/boot/dts/imx6ul.dtsi2
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi1
-rw-r--r--arch/arm/boot/dts/keystone-k2e.dtsi6
-rw-r--r--arch/arm/boot/dts/keystone.dtsi4
-rw-r--r--arch/arm/boot/dts/meson.dtsi19
-rw-r--r--arch/arm/boot/dts/meson8.dtsi75
-rw-r--r--arch/arm/boot/dts/meson8b-ec100.dts5
-rw-r--r--arch/arm/boot/dts/meson8b-mxq.dts5
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts5
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi75
-rw-r--r--arch/arm/boot/dts/meson8m2-mxiii-plus.dts5
-rw-r--r--arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts8
-rw-r--r--arch/arm/boot/dts/mmp2.dtsi5
-rw-r--r--arch/arm/boot/dts/mmp3-dell-ariel.dts33
-rw-r--r--arch/arm/boot/dts/mmp3.dtsi8
-rw-r--r--arch/arm/boot/dts/motorola-mapphone-common.dtsi23
-rw-r--r--arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi49
-rw-r--r--arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts1
-rw-r--r--arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts1
-rw-r--r--arch/arm/boot/dts/omap3-echo.dts67
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dtsi4
-rw-r--r--arch/arm/boot/dts/omap3-igep.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-igep0020-common.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-igep0020-rev-f.dts2
-rw-r--r--arch/arm/boot/dts/omap3-igep0020.dts2
-rw-r--r--arch/arm/boot/dts/omap3-igep0030-common.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-igep0030-rev-g.dts2
-rw-r--r--arch/arm/boot/dts/omap3-igep0030.dts2
-rw-r--r--arch/arm/boot/dts/omap36xx.dtsi1
-rw-r--r--arch/arm/boot/dts/omap443x.dtsi6
-rw-r--r--arch/arm/boot/dts/owl-s500-cubieboard6.dts7
-rw-r--r--arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts7
-rw-r--r--arch/arm/boot/dts/owl-s500-labrador-base-m.dts7
-rw-r--r--arch/arm/boot/dts/owl-s500-roseapplepi.dts97
-rw-r--r--arch/arm/boot/dts/owl-s500-sparky.dts7
-rw-r--r--arch/arm/boot/dts/owl-s500.dtsi140
-rw-r--r--arch/arm/boot/dts/qcom-apq8060-dragonboard.dts12
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts8
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts8
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-ifc6410.dts10
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts4
-rw-r--r--arch/arm/boot/dts/qcom-apq8074-dragonboard.dts10
-rw-r--r--arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts28
-rw-r--r--arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts27
-rw-r--r--arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi254
-rw-r--r--arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts214
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi18
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts4
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi10
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts8
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts2
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi10
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019.dtsi90
-rw-r--r--arch/arm/boot/dts/qcom-ipq8064-ap148.dts2
-rw-r--r--arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi12
-rw-r--r--arch/arm/boot/dts/qcom-ipq8064.dtsi31
-rw-r--r--arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi16
-rw-r--r--arch/arm/boot/dts/qcom-msm8660-surf.dts4
-rw-r--r--arch/arm/boot/dts/qcom-msm8960-cdp.dts8
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts14
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts32
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts115
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts14
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts18
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts16
-rw-r--r--arch/arm/boot/dts/qcom-msm8974.dtsi43
-rw-r--r--arch/arm/boot/dts/qcom-msm8974pro.dtsi5
-rw-r--r--arch/arm/boot/dts/qcom-pmx55.dtsi84
-rw-r--r--arch/arm/boot/dts/qcom-sdx55-mtp.dts251
-rw-r--r--arch/arm/boot/dts/qcom-sdx55.dtsi505
-rw-r--r--arch/arm/boot/dts/rk3036.dtsi83
-rw-r--r--arch/arm/boot/dts/rk322x.dtsi32
-rw-r--r--arch/arm/boot/dts/rk3288-miqi.dts5
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi115
-rw-r--r--arch/arm/boot/dts/rk3xxx.dtsi106
-rw-r--r--arch/arm/boot/dts/rv1108.dtsi14
-rw-r--r--arch/arm/boot/dts/socfpga_arria10.dtsi13
-rw-r--r--arch/arm/boot/dts/ste-ab8500.dtsi64
-rw-r--r--arch/arm/boot/dts/ste-ab8505.dtsi67
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi12
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi23
-rw-r--r--arch/arm/boot/dts/ste-href520-tvk.dts42
-rw-r--r--arch/arm/boot/dts/ste-hrefprev60-stuib.dts19
-rw-r--r--arch/arm/boot/dts/ste-hrefprev60-tvk.dts19
-rw-r--r--arch/arm/boot/dts/ste-hrefprev60.dtsi8
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus-stuib.dts39
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus-tvk.dts39
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus.dtsi76
-rw-r--r--arch/arm/boot/dts/ste-nomadik-nhk15.dts2
-rw-r--r--arch/arm/boot/dts/ste-nomadik-s8815.dts2
-rw-r--r--arch/arm/boot/dts/ste-nomadik-stn8815.dtsi2
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts8
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-golden.dts42
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-janice.dts930
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-skomer.dts41
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi2
-rw-r--r--arch/arm/boot/dts/stm32f746.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi2
-rw-r--r--arch/arm/boot/dts/stm32mp15-pinctrl.dtsi40
-rw-r--r--arch/arm/boot/dts/stm32mp151.dtsi9
-rw-r--r--arch/arm/boot/dts/stm32mp157a-stinger96.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ed1.dts4
-rw-r--r--arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts13
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi2
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi12
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi20
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dkx.dtsi4
-rw-r--r--arch/arm/boot/dts/sun4i-a10-a1000.dts4
-rw-r--r--arch/arm/boot/dts/sun4i-a10-cubieboard.dts4
-rw-r--r--arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts1
-rw-r--r--arch/arm/boot/dts/sun4i-a10-inet1.dts1
-rw-r--r--arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts2
-rw-r--r--arch/arm/boot/dts/sun4i-a10-marsboard.dts8
-rw-r--r--arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts2
-rw-r--r--arch/arm/boot/dts/sun4i-a10-pcduino.dts4
-rw-r--r--arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts1
-rw-r--r--arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-a10s-mk802.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts1
-rw-r--r--arch/arm/boot/dts/sun5i-a13-licheepi-one.dts6
-rw-r--r--arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-a13-olinuxino.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts3
-rw-r--r--arch/arm/boot/dts/sun5i-a13.dtsi2
-rw-r--r--arch/arm/boot/dts/sun5i-gr8-evb.dts2
-rw-r--r--arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi1
-rw-r--r--arch/arm/boot/dts/sun5i.dtsi12
-rw-r--r--arch/arm/boot/dts/sun6i-a31-hummingbird.dts2
-rw-r--r--arch/arm/boot/dts/sun6i-a31-i7.dts2
-rw-r--r--arch/arm/boot/dts/sun6i-a31-m9.dts4
-rw-r--r--arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts4
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi4
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-primo81.dts3
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi2
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts79
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts2
-rw-r--r--arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts4
-rw-r--r--arch/arm/boot/dts/sun7i-a20-bananapi.dts2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-bananapro.dts4
-rw-r--r--arch/arm/boot/dts/sun7i-a20-cubieboard2.dts4
-rw-r--r--arch/arm/boot/dts/sun7i-a20-cubietruck.dts8
-rw-r--r--arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts4
-rw-r--r--arch/arm/boot/dts/sun7i-a20-itead-ibox.dts4
-rw-r--r--arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-m3.dts2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts6
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts4
-rw-r--r--arch/arm/boot/dts/sun7i-a20-orangepi.dts2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts6
-rw-r--r--arch/arm/boot/dts/sun7i-a20-pcduino3.dts4
-rw-r--r--arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts1
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi2
-rw-r--r--arch/arm/boot/dts/sun8i-a23-a33.dtsi2
-rw-r--r--arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts2
-rw-r--r--arch/arm/boot/dts/sun8i-a33-olinuxino.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts3
-rw-r--r--arch/arm/boot/dts/sun8i-a33.dtsi2
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts8
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts2
-rw-r--r--arch/arm/boot/dts/sun8i-a83t.dtsi3
-rw-r--r--arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts30
-rw-r--r--arch/arm/boot/dts/sun8i-h3-beelink-x2.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi.dtsi4
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts8
-rw-r--r--arch/arm/boot/dts/sun8i-r16-parrot.dts10
-rw-r--r--arch/arm/boot/dts/sun8i-r40.dtsi19
-rw-r--r--arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi3
-rw-r--r--arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi2
-rw-r--r--arch/arm/boot/dts/sun8i-s3-pinecube.dts11
-rw-r--r--arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts12
-rw-r--r--arch/arm/boot/dts/sun8i-v3-sl631.dtsi138
-rw-r--r--arch/arm/boot/dts/sun8i-v3s.dtsi17
-rw-r--r--arch/arm/boot/dts/sun9i-a80-cubieboard4.dts4
-rw-r--r--arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi1
-rw-r--r--arch/arm/boot/dts/tegra30-ouya.dts4
-rw-r--r--arch/arm/boot/dts/zynq-ebaz4205.dts132
-rw-r--r--arch/arm64/Kconfig.platforms5
-rw-r--r--arch/arm64/boot/dts/allwinner/Makefile1
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts6
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts11
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts5
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi18
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts26
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts1
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi1
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi6
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi13
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi20
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts15
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts7
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi26
-rw-r--r--arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi4
-rw-r--r--arch/arm64/boot/dts/amlogic/Makefile4
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts133
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi16
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi21
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts7
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts429
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts96
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi442
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts10
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm4908/Makefile1
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts52
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi18
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts51
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi117
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi64
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi278
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi7
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi4
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7-espresso.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/Makefile8
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts21
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts5
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts50
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi60
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts4
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts62
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts5
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts8
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts16
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi182
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi98
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts3
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi98
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi122
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi17
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi17
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi4
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi118
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi3
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi12
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts10
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts24
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi147
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi1
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi4
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts393
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi495
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts19
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi186
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts20
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi311
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts19
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi362
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm.dtsi23
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi307
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts19
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi466
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi75
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn.dtsi44
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts161
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi293
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp.dtsi23
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts20
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts6
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts35
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi113
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts93
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts30
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi118
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq.dtsi72
-rw-r--r--arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi6
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3660.dtsi6
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3670.dtsi77
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi8
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi6220.dtsi8
-rw-r--r--arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi632
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip05.dtsi2
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip06.dtsi6
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip07.dtsi9
-rw-r--r--arch/arm64/boot/dts/intel/Makefile1
-rw-r--r--arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts53
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-37xx.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap807.dtsi5
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap80x.dtsi3
-rw-r--r--arch/arm64/boot/dts/marvell/armada-cp11x.dtsi10
-rw-r--r--arch/arm64/boot/dts/marvell/cn9130-db.dts2
-rw-r--r--arch/arm64/boot/dts/mediatek/Makefile1
-rw-r--r--arch/arm64/boot/dts/mediatek/mt6779.dtsi17
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622.dtsi2
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183-evb.dts12
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts23
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts5
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi46
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183.dtsi26
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8192.dtsi57
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8516.dtsi30
-rw-r--r--arch/arm64/boot/dts/nvidia/Makefile1
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts742
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186.dtsi22
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi8
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts595
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts339
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts10
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi351
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi282
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi19
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi284
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194.dtsi48
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts299
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts175
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210.dtsi261
-rw-r--r--arch/arm64/boot/dts/qcom/Makefile15
-rw-r--r--arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi4
-rw-r--r--arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts23
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts291
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts195
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts267
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-pins.dtsi16
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi10
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi20
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts41
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts15
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts67
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts92
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992.dtsi743
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts73
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts15
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi909
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts26
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts45
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts18
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts4
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts20
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi457
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994.dtsi321
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi4
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi16
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi10
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-pins.dtsi108
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998.dtsi393
-rw-r--r--arch/arm64/boot/dts/qcom/pm8150.dtsi12
-rw-r--r--arch/arm64/boot/dts/qcom/pm8150b.dtsi12
-rw-r--r--arch/arm64/boot/dts/qcom/pm8150l.dtsi12
-rw-r--r--arch/arm64/boot/dts/qcom/pm8994.dtsi4
-rw-r--r--arch/arm64/boot/dts/qcom/pm8998.dtsi2
-rw-r--r--arch/arm64/boot/dts/qcom/pmi8998.dtsi8
-rw-r--r--arch/arm64/boot/dts/qcom/pms405.dtsi2
-rw-r--r--arch/arm64/boot/dts/qcom/qrb5165-rb5.dts563
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi91
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180.dtsi49
-rw-r--r--arch/arm64/boot/dts/qcom/sdm630.dtsi12
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-db845c.dts4
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi623
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts19
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts23
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sdm850.dtsi21
-rw-r--r--arch/arm64/boot/dts/qcom/sm8150.dtsi158
-rw-r--r--arch/arm64/boot/dts/qcom/sm8250-mtp.dts269
-rw-r--r--arch/arm64/boot/dts/qcom/sm8250.dtsi940
-rw-r--r--arch/arm64/boot/dts/qcom/sm8350-mtp.dts250
-rw-r--r--arch/arm64/boot/dts/qcom/sm8350.dtsi499
-rw-r--r--arch/arm64/boot/dts/renesas/Makefile2
-rw-r--r--arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi137
-rw-r--r--arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi47
-rw-r--r--arch/arm64/boot/dts/renesas/hihope-common.dtsi2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts41
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774a1.dtsi32
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts66
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774b1.dtsi32
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0.dtsi17
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts71
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774e1.dtsi32
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77951.dtsi65
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77960.dtsi65
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77961.dtsi135
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965.dtsi65
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77980-condor.dts2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990.dtsi65
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995-draak.dts2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995.dtsi135
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi138
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts6
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779a0.dtsi837
-rw-r--r--arch/arm64/boot/dts/renesas/salvator-common.dtsi2
-rw-r--r--arch/arm64/boot/dts/renesas/ulcb.dtsi2
-rw-r--r--arch/arm64/boot/dts/rockchip/Makefile2
-rw-r--r--arch/arm64/boot/dts/rockchip/px30.dtsi83
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3308.dtsi63
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts382
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-rock64.dts56
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328.dtsi33
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368.dtsi62
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts1
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts52
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi1
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock960.dts53
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi29
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399.dtsi109
-rw-r--r--arch/arm64/boot/dts/synaptics/as370.dtsi4
-rw-r--r--arch/arm64/boot/dts/synaptics/berlin4ct.dtsi12
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65-main.dtsi4
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65.dtsi2
-rw-r--r--arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts38
-rw-r--r--arch/arm64/boot/dts/ti/k3-j7200-main.dtsi161
-rw-r--r--arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi42
-rw-r--r--arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi80
-rw-r--r--arch/arm64/boot/dts/ti/k3-j7200.dtsi2
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-main.dtsi70
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e.dtsi2
-rw-r--r--arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts9
-rw-r--r--arch/arm64/boot/dts/toshiba/tmpv7708.dtsi23
-rw-r--r--arch/arm64/boot/dts/xilinx/Makefile1
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi22
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts33
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts94
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts40
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts293
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts89
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts70
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp.dtsi128
-rw-r--r--include/dt-bindings/clock/tegra210-car.h2
569 files changed, 31065 insertions, 4410 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 3341788d1096..5f6769bf45bd 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -151,6 +151,7 @@ properties:
- description: Boards with the Amlogic Meson G12B S922X SoC
items:
- enum:
+ - azw,gsking-x
- azw,gtking
- azw,gtking-pro
- hardkernel,odroid-n2
@@ -163,9 +164,10 @@ properties:
- description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
items:
- enum:
- - seirobotics,sei610
- - khadas,vim3l
- hardkernel,odroid-c4
+ - hardkernel,odroid-hc4
+ - khadas,vim3l
+ - seirobotics,sei610
- const: amlogic,sm1
- description: Boards with the Amlogic Meson A1 A113L SoC
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
new file mode 100644
index 000000000000..eee7cda9f91b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson8/Meson8b/Meson8m2 SECBUS2 register interface
+
+maintainers:
+ - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+ The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which
+ contains registers for various IP blocks such as pin-controller bits for
+ the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits.
+ The registers can be accessed directly when not running in "secure mode".
+ When "secure mode" is enabled then these registers have to be accessed
+ through secure monitor calls.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - amlogic,meson8-secbus2
+ - amlogic,meson8b-secbus2
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ secbus2: system-controller@4000 {
+ compatible = "amlogic,meson8-secbus2", "syscon";
+ reg = <0x4000 0x2000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
index 5fec063d9a13..e55731f43c84 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
@@ -19,6 +19,8 @@ properties:
oneOf:
- description: BCM4906 based boards
items:
+ - enum:
+ - netgear,r8000p
- const: brcm,bcm4906
- const: brcm,bcm4908
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index f02fd10de604..26b886b20b27 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -169,6 +169,7 @@ properties:
- qcom,kryo385
- qcom,kryo468
- qcom,kryo485
+ - qcom,kryo685
- qcom,scorpion
enable-method:
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 34000f7fbe02..297c87f45db8 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -210,6 +210,7 @@ properties:
- kiebackpeter,imx6q-tpc # K+P i.MX6 Quad TPC Board
- kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module
- kosagi,imx6q-novena # Kosagi Novena Dual/Quad
+ - kvg,vicut1q # Kverneland UT1Q board
- logicpd,imx6q-logicpd
- lwn,display5 # Liebherr Display5 i.MX6 Quad Board
- lwn,mccmon6 # Liebherr Monitor6 i.MX6 Quad Board
@@ -331,6 +332,7 @@ properties:
- fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- karo,imx6qp-tx6qp # Ka-Ro electronics TX6QP-8037 Module
+ - kvg,vicutp # Kverneland UT1P board
- prt,prtwd3 # Protonic WD3 board
- wand,imx6qp-wandboard # Wandboard i.MX6 QuadPlus Board
- zii,imx6qp-zii-rdu2 # ZII RDU2+ Board
@@ -364,7 +366,12 @@ properties:
- fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board
- karo,imx6dl-tx6dl # Ka-Ro electronics TX6U Modules
- kontron,imx6dl-samx6i # Kontron i.MX6 Solo SMARC Module
+ - kvg,victgo # Kverneland TGO
+ - kvg,vicut1 # Kverneland UT1 board
+ - ply,plybas # Plymovent BAS board
+ - ply,plym2m # Plymovent M2M board
- poslab,imx6dl-savageboard # Poslab SavageBoard Dual
+ - prt,prtmvt # Protonic MVT board
- prt,prtrvt # Protonic RVT board
- prt,prtvt7 # Protonic VT7 board
- rex,imx6dl-rex-basic # Rex Basic i.MX6 Dual Lite Board
@@ -488,6 +495,7 @@ properties:
- karo,imx6ul-tx6ul # Ka-Ro electronics TXUL-0010 Module
- kontron,imx6ul-n6310-som # Kontron N6310 SOM
- kontron,imx6ul-n6311-som # Kontron N6311 SOM
+ - prt,prti6g # Protonic PRTI6G Board
- technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf
- technexion,imx6ul-pico-hobbit # TechNexion i.MX6UL Pico-Hobbit
- technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi
@@ -670,8 +678,12 @@ properties:
items:
- enum:
- beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
+ - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board
- fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board
- fsl,imx8mm-evk # i.MX8MM EVK Board
+ - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit
+ - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit
+ - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit
- kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM
- variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module
- const: fsl,imx8mm
@@ -691,6 +703,7 @@ properties:
- description: i.MX8MN based Boards
items:
- enum:
+ - beacon,imx8mn-beacon-kit # i.MX8MN Beacon Development Kit
- fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board
- fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board
- const: fsl,imx8mn
@@ -707,6 +720,12 @@ properties:
- fsl,imx8mp-evk # i.MX8MP EVK Board
- const: fsl,imx8mp
+ - description: PHYTEC phyCORE-i.MX8MP SoM based boards
+ items:
+ - const: phytec,imx8mp-phyboard-pollux-rdk # phyBOARD-Pollux RDK
+ - const: phytec,imx8mp-phycore-som # phyCORE-i.MX8MP SoM
+ - const: fsl,imx8mp
+
- description: i.MX8MQ based Boards
items:
- enum:
@@ -724,6 +743,7 @@ properties:
- enum:
- purism,librem5r2 # Purism Librem5 phone "Chestnut"
- purism,librem5r3 # Purism Librem5 phone "Dogwood"
+ - purism,librem5r4 # Purism Librem5 phone "Evergreen"
- const: purism,librem5
- const: fsl,imx8mq
@@ -834,10 +854,12 @@ properties:
Kontron SMARC-sAL28 board on the SMARC Eval Carrier 2.0
items:
- enum:
+ - kontron,sl28-var1-ads2
- kontron,sl28-var2-ads2
- kontron,sl28-var3-ads2
- kontron,sl28-var4-ads2
- enum:
+ - kontron,sl28-var1
- kontron,sl28-var2
- kontron,sl28-var3
- kontron,sl28-var4
@@ -848,6 +870,7 @@ properties:
Kontron SMARC-sAL28 board (on a generic/undefined carrier)
items:
- enum:
+ - kontron,sl28-var1
- kontron,sl28-var2
- kontron,sl28-var3
- kontron,sl28-var4
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 53f0d4e3ea98..93b3bdf6eaeb 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -120,7 +120,9 @@ properties:
- const: mediatek,mt8183
- description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
items:
- - const: google,krane-sku176
+ - enum:
+ - google,krane-sku0
+ - google,krane-sku176
- const: google,krane
- const: mediatek,mt8183
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index c97d4a580f47..174134f920e1 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -40,7 +40,9 @@ description: |
sdm630
sdm660
sdm845
+ sdx55
sm8250
+ sm8350
The 'board' element must be one of the following strings:
@@ -169,6 +171,11 @@ properties:
- items:
- enum:
+ - qcom,sdx55-mtp
+ - const: qcom,sdx55
+
+ - items:
+ - enum:
- qcom,ipq6018-cp01-c1
- const: qcom,ipq6018
@@ -178,6 +185,11 @@ properties:
- qcom,sm8250-mtp
- const: qcom,sm8250
+ - items:
+ - enum:
+ - qcom,sm8350-mtp
+ - const: qcom,sm8350
+
additionalProperties: true
...
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index fe11be65039a..5fd0696a9f91 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -130,6 +130,7 @@ properties:
- description: RZ/G2N (R8A774B1)
items:
- enum:
+ - beacon,beacon-rzg2n # Beacon EmbeddedWorks RZ/G2N Kit
- hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform
- const: renesas,r8a774b1
@@ -154,6 +155,7 @@ properties:
- description: RZ/G2H (R8A774E1)
items:
- enum:
+ - beacon,beacon-rzg2h # Beacon EmbeddedWorks RZ/G2H Kit
- hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform
- const: renesas,r8a774e1
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index ef4544ad6f82..8a2dd9f1cff2 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -467,6 +467,11 @@ properties:
- const: radxa,rockpi4
- const: rockchip,rk3399
+ - description: Radxa ROCK Pi E
+ items:
+ - const: radxa,rockpi-e
+ - const: rockchip,rk3328
+
- description: Radxa ROCK Pi N8
items:
- const: radxa,rockpi-n8
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 6db32fbf813f..08607c7ec1bf 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -657,7 +657,8 @@ properties:
- description: Pine64 PineCube
items:
- const: pine64,pinecube
- - const: allwinner,sun8i-s3
+ - const: sochip,s3
+ - const: allwinner,sun8i-v3
- description: Pine64 PineH64 model A
items:
@@ -683,23 +684,31 @@ properties:
- description: Pine64 PinePhone Developer Batch (1.0)
items:
- const: pine64,pinephone-1.0
+ - const: pine64,pinephone
- const: allwinner,sun50i-a64
- description: Pine64 PinePhone Braveheart (1.1)
items:
- const: pine64,pinephone-1.1
+ - const: pine64,pinephone
- const: allwinner,sun50i-a64
- description: Pine64 PinePhone (1.2)
items:
- const: pine64,pinephone-1.2
+ - const: pine64,pinephone
- const: allwinner,sun50i-a64
- - description: Pine64 PineTab
+ - description: Pine64 PineTab, Development Sample
items:
- const: pine64,pinetab
- const: allwinner,sun50i-a64
+ - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones)
+ items:
+ - const: pine64,pinetab-early-adopter
+ - const: allwinner,sun50i-a64
+
- description: Pine64 SoPine Baseboard
items:
- const: pine64,sopine-baseboard
@@ -777,6 +786,12 @@ properties:
- const: sinlinx,sina33
- const: allwinner,sun8i-a33
+ - description: SL631 Action Camera with IMX179
+ items:
+ - const: allwinner,sl631-imx179
+ - const: allwinner,sl631
+ - const: allwinner,sun8i-v3
+
- description: Tanix TX6
items:
- const: oranth,tanix-tx6
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index c5fbf869aa93..b9f75e20fef5 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -120,10 +120,18 @@ properties:
items:
- const: nvidia,p3668-0000
- const: nvidia,tegra194
+ - description: Jetson Xavier NX (eMMC)
+ items:
+ - const: nvidia,p3668-0001
+ - const: nvidia,tegra194
- description: Jetson Xavier NX Developer Kit
items:
- const: nvidia,p3509-0000+p3668-0000
- const: nvidia,tegra194
+ - description: Jetson Xavier NX Developer Kit (eMMC)
+ items:
+ - const: nvidia,p3509-0000+p3668-0001
+ - const: nvidia,tegra194
- items:
- enum:
- nvidia,tegra234-vdk
diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml
index e0c6787f6e94..f52c7e8ce654 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.yaml
+++ b/Documentation/devicetree/bindings/arm/xilinx.yaml
@@ -22,6 +22,9 @@ properties:
- adapteva,parallella
- digilent,zynq-zybo
- digilent,zynq-zybo-z7
+ - ebang,ebaz4205
+ - myir,zynq-zturn-v5
+ - myir,zynq-zturn
- xlnx,zynq-cc108
- xlnx,zynq-zc702
- xlnx,zynq-zc706
@@ -91,6 +94,7 @@ properties:
items:
- enum:
- xlnx,zynqmp-zcu104-revA
+ - xlnx,zynqmp-zcu104-revC
- xlnx,zynqmp-zcu104-rev1.0
- const: xlnx,zynqmp-zcu104
- const: xlnx,zynqmp
@@ -107,7 +111,7 @@ properties:
items:
- enum:
- xlnx,zynqmp-zcu111-revA
- - xlnx,zynqmp-zcu11-rev1.0
+ - xlnx,zynqmp-zcu111-rev1.0
- const: xlnx,zynqmp-zcu111
- const: xlnx,zynqmp
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 27fffafe5b5c..3207608d1178 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -105,26 +105,27 @@ properties:
- dlc,dlc1010gig
# Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
- edt,et035012dm6
+ # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+ - edt,et057090dhu
+ - edt,et070080dh6
# Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch
- edt,etm043080dh6gp
# Emerging Display Technology Corp. 480x272 TFT Display
- edt,etm0430g0dh6
- # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
- - edt,et057090dhu
- # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
- - edt,etm070080dh6
- # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
- - edt,etm0700g0dh6
# Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
# Same as ETM0700G0DH6 but with inverted pixel clock.
- edt,etm070080bdh6
# Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+ # Same timings as the ETM0700G0DH6, but with resistive touch.
+ - edt,etm070080dh6
+ # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
# Same display as the ETM0700G0BDH6, but with changed hardware for the
# backlight and the touch interface.
- edt,etm070080edh6
+ - edt,etm0700g0bdh6
# Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
- # Same timings as the ETM0700G0DH6, but with resistive touch.
- - edt,etm070080dh6
+ - edt,etm0700g0dh6
+ - edt,etm0700g0edh6
# Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
- evervision,vgg804821
# Foxlink Group 5" WVGA TFT LCD panel
@@ -173,6 +174,8 @@ properties:
- koe,tx26d202vm0bwa
# Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
- koe,tx31d200vm0baa
+ # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT
+ - kyo,tcg070wvlq
# Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
- kyo,tcg121xglp
# LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index 78456437df5f..a884955f861e 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -22,6 +22,8 @@ Required properties:
* "qcom,scm-sc7180"
* "qcom,scm-sdm845"
* "qcom,scm-sm8150"
+ * "qcom,scm-sm8250"
+ * "qcom,scm-sm8350"
and:
* "qcom,scm"
- clocks: Specifies clocks needed by the SCM interface, if any:
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
index 4db3b8a3332c..9cf6137dd524 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
@@ -82,8 +82,7 @@ properties:
'#gpio-cells':
const: 2
- gpio-ranges:
- maxItems: 1
+ gpio-ranges: true
interrupts: true
diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
index 5ccbb1f81960..e759a5da708d 100644
--- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -46,10 +46,14 @@ description: |
properties:
compatible:
- enum:
- - x-powers,axp209-adc
- - x-powers,axp221-adc
- - x-powers,axp813-adc
+ oneOf:
+ - const: x-powers,axp209-adc
+ - const: x-powers,axp221-adc
+ - const: x-powers,axp813-adc
+
+ - items:
+ - const: x-powers,axp803-adc
+ - const: x-powers,axp813-adc
"#io-channel-cells":
const: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index 8acca0ae3129..4fd1e2780026 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -29,6 +29,9 @@ properties:
- items:
- const: allwinner,sun8i-a83t-r-intc
- const: allwinner,sun6i-a31-r-intc
+ - items:
+ - const: allwinner,sun8i-v3s-nmi
+ - const: allwinner,sun9i-a80-nmi
- const: allwinner,sun9i-a80-nmi
- items:
- const: allwinner,sun50i-a64-r-intc
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
index 6a56214c6cfd..b80980b1908e 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
@@ -20,6 +20,9 @@ properties:
oneOf:
- const: allwinner,sun8i-h3-deinterlace
- items:
+ - const: allwinner,sun8i-r40-deinterlace
+ - const: allwinner,sun8i-h3-deinterlace
+ - items:
- const: allwinner,sun50i-a64-deinterlace
- const: allwinner,sun8i-h3-deinterlace
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
index 49bff738aca5..52eab686a177 100644
--- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
@@ -23,6 +23,9 @@ properties:
interrupts:
maxItems: 1
+ power-domains:
+ maxItems: 1
+
port:
type: object
additionalProperties: false
@@ -75,6 +78,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/clock/marvell,mmp2.h>
+ #include <dt-bindings/power/marvell,mmp2.h>
camera@d420a000 {
compatible = "marvell,mmp2-ccic";
@@ -84,6 +88,7 @@ examples:
clock-names = "axi";
#clock-cells = <0>;
clock-output-names = "mclk";
+ power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
port {
camera0_0: endpoint {
diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
index 37c2a601c3fa..b1b0ee769b71 100644
--- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
@@ -128,7 +128,6 @@ required:
- compatible
- reg
- interrupts
- - clocks
- clock-output-names
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
new file mode 100644
index 000000000000..effcc72f9425
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/imx8m-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Series SoC
+
+maintainers:
+ - Alice Guo <alice.guo@nxp.com>
+
+description: |
+ NXP i.MX8M series SoCs contain fuse entries from which SoC Unique ID can be
+ obtained.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8mm
+ - fsl,imx8mn
+ - fsl,imx8mp
+ - fsl,imx8mq
+ required:
+ - compatible
+
+patternProperties:
+ "^soc@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx8mm-soc
+ - fsl,imx8mn-soc
+ - fsl,imx8mp-soc
+ - fsl,imx8mq-soc
+ - const: simple-bus
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+ dma-ranges: true
+
+ nvmem-cells:
+ maxItems: 1
+ description: Phandle to the SOC Unique ID provided by a nvmem node
+
+ nvmem-cell-names:
+ const: soc_unique_id
+
+ required:
+ - compatible
+ - nvmem-cells
+ - nvmem-cell-names
+
+ additionalProperties:
+ type: object
+
+additionalProperties: true
+
+examples:
+ - |
+ / {
+ model = "FSL i.MX8MM EVK board";
+ compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc@0 {
+ compatible = "fsl,imx8mm-soc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x3e000000>;
+ nvmem-cells = <&imx8mm_uid>;
+ nvmem-cell-names = "soc_unique_id";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
deleted file mode 100644
index 16b734ad3102..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Xilinx Zynq QSPI controller Device Tree Bindings
--------------------------------------------------------------------
-
-Required properties:
-- compatible : Should be "xlnx,zynq-qspi-1.0".
-- reg : Physical base address and size of QSPI registers map.
-- interrupts : Property with a value describing the interrupt
- number.
-- clock-names : List of input clock names - "ref_clk", "pclk"
- (See clock bindings for details).
-- clocks : Clock phandles (see clock bindings for details).
-
-Optional properties:
-- num-cs : Number of chip selects used.
-
-Example:
- qspi: spi@e000d000 {
- compatible = "xlnx,zynq-qspi-1.0";
- reg = <0xe000d000 0x1000>;
- interrupt-parent = <&intc>;
- interrupts = <0 19 4>;
- clock-names = "ref_clk", "pclk";
- clocks = <&clkc 10>, <&clkc 43>;
- num-cs = <1>;
- };
diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
new file mode 100644
index 000000000000..1f1c40a9f320
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/xlnx,zynq-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq QSPI controller
+
+description:
+ The Xilinx Zynq QSPI controller is used to access multi-bit serial flash
+ memory devices.
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+maintainers:
+ - Michal Simek <michal.simek@xilinx.com>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ const: xlnx,zynq-qspi-1.0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: reference clock
+ - description: peripheral clock
+
+ clock-names:
+ items:
+ - const: ref_clk
+ - const: pclk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi@e000d000 {
+ compatible = "xlnx,zynq-qspi-1.0";
+ reg = <0xe000d000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 19 4>;
+ clock-names = "ref_clk", "pclk";
+ clocks = <&clkc 10>, <&clkc 43>;
+ num-cs = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
index 19d116ff9ddc..6d65771e979c 100644
--- a/Documentation/devicetree/bindings/sram/sram.yaml
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -72,6 +72,8 @@ patternProperties:
- allwinner,sun4i-a10-sram-d
- allwinner,sun9i-a80-smp-sram
- allwinner,sun50i-a64-sram-c
+ - amlogic,meson8-ao-arc-sram
+ - amlogic,meson8b-ao-arc-sram
- amlogic,meson8-smp-sram
- amlogic,meson8b-smp-sram
- amlogic,meson-gxbb-scp-shmem
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 2cf525d21e05..fd93b941f07a 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -17,6 +17,7 @@ properties:
- qcom,msm8998-dwc3
- qcom,sc7180-dwc3
- qcom,sdm845-dwc3
+ - qcom,sdx55-dwc3
- const: qcom,dwc3
reg:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 041ae90b0d8f..3b2958202258 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -59,6 +59,8 @@ patternProperties:
description: Aeroflex Gaisler AB
"^al,.*":
description: Annapurna Labs
+ "^alcatel,.*":
+ description: Alcatel
"^allegro,.*":
description: Allegro DVT
"^allo,.*":
@@ -311,6 +313,8 @@ patternProperties:
description: Dyna-Image
"^ea,.*":
description: Embedded Artists AB
+ "^ebang,.*":
+ description: Zhejiang Ebang Communication Co., Ltd
"^ebs-systart,.*":
description: EBS-SYSTART GmbH
"^ebv,.*":
@@ -467,10 +471,10 @@ patternProperties:
description: Hitex Development Tools
"^holt,.*":
description: Holt Integrated Circuits, Inc.
- "^honeywell,.*":
- description: Honeywell
"^honestar,.*":
description: Honestar Technologies Co., Ltd.
+ "^honeywell,.*":
+ description: Honeywell
"^hoperun,.*":
description: Jiangsu HopeRun Software Co., Ltd.
"^hp,.*":
@@ -581,6 +585,8 @@ patternProperties:
description: Kontron S&T AG
"^kosagi,.*":
description: Sutajio Ko-Usagi PTE Ltd.
+ "^kvg,.*":
+ description: Kverneland Group
"^kyo,.*":
description: Kyocera Corporation
"^lacie,.*":
@@ -866,6 +872,8 @@ patternProperties:
description: PLDA
"^plx,.*":
description: Broadcom Corporation (formerly PLX Technology)
+ "^ply,.*":
+ description: Plymovent Group BV
"^pni,.*":
description: PNI Sensor Corporation
"^pocketbook,.*":
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
index 8e3760a3822b..b8e4118945a0 100644
--- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -18,6 +18,7 @@ properties:
- qcom,apss-wdt-qcs404
- qcom,apss-wdt-sc7180
- qcom,apss-wdt-sdm845
+ - qcom,apss-wdt-sdx55
- qcom,apss-wdt-sm8150
- qcom,kpss-timer
- qcom,kpss-wdt
diff --git a/MAINTAINERS b/MAINTAINERS
index e6b425a5cb33..f70e9ce88368 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2607,9 +2607,11 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti.git
F: Documentation/devicetree/bindings/arm/toshiba.yaml
F: Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
F: Documentation/devicetree/bindings/pinctrl/toshiba,tmpv7700-pinctrl.yaml
+F: Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
F: arch/arm64/boot/dts/toshiba/
F: drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
F: drivers/pinctrl/visconti/
+F: drivers/watchdog/visconti_wdt.c
N: visconti
ARM/UNIPHIER ARCHITECTURE
@@ -2697,6 +2699,7 @@ W: http://wiki.xilinx.com
T: git https://github.com/Xilinx/linux-xlnx.git
F: Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
F: Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+F: Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
F: arch/arm/mach-zynq/
F: drivers/block/xsysace.c
F: drivers/clocksource/timer-cadence-ttc.c
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6d8abff55238..8e5d4ab4e75e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -459,6 +459,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-pico-hobbit.dtb \
imx6dl-pico-nymph.dtb \
imx6dl-pico-pi.dtb \
+ imx6dl-plybas.dtb \
+ imx6dl-plym2m.dtb \
+ imx6dl-prtmvt.dtb \
imx6dl-prtrvt.dtb \
imx6dl-prtvt7.dtb \
imx6dl-rex-basic.dtb \
@@ -481,6 +484,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-tx6u-811x.dtb \
imx6dl-tx6u-81xx-mb7.dtb \
imx6dl-udoo.dtb \
+ imx6dl-victgo.dtb \
+ imx6dl-vicut1.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
imx6dl-wandboard-revd1.dtb \
@@ -574,6 +579,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-udoo.dtb \
imx6q-utilite-pro.dtb \
imx6q-var-dt6customboard.dtb \
+ imx6q-vicut1.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
imx6q-wandboard-revd1.dtb \
@@ -588,6 +594,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6qp-tx6qp-8037-mb7.dtb \
imx6qp-tx6qp-8137.dtb \
imx6qp-tx6qp-8137-mb7.dtb \
+ imx6qp-vicutp.dtb \
imx6qp-wandboard-revd1.dtb \
imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
@@ -625,6 +632,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-pico-pi.dtb \
imx6ul-phytec-segin-ff-rdk-emmc.dtb \
imx6ul-phytec-segin-ff-rdk-nand.dtb \
+ imx6ul-prti6g.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
@@ -811,6 +819,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-lxm.dtb \
am335x-moxa-uc-2101.dtb \
am335x-moxa-uc-8100-me-t.dtb \
+ am335x-myirtech-myd.dtb \
am335x-nano.dtb \
am335x-netcan-plus-1xx.dtb \
am335x-netcom-plus-2xx.dtb \
@@ -901,6 +910,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
+ qcom-ipq4018-ap120c-ac.dtb \
+ qcom-ipq4018-ap120c-ac-bit.dtb \
+ qcom-ipq4018-jalapeno.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c3.dtb \
@@ -916,7 +928,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8974-sony-xperia-amami.dtb \
qcom-msm8974-sony-xperia-castor.dtb \
qcom-msm8974-sony-xperia-honami.dtb \
- qcom-mdm9615-wp8548-mangoh-green.dtb
+ qcom-mdm9615-wp8548-mangoh-green.dtb \
+ qcom-sdx55-mtp.dtb
dtb-$(CONFIG_ARCH_RDA) += \
rda8810pl-orangepi-2g-iot.dtb \
rda8810pl-orangepi-i96.dtb
@@ -1213,6 +1226,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-s3-lichee-zero-plus.dtb \
sun8i-s3-pinecube.dtb \
sun8i-t3-cqa3t-bv3.dtb \
+ sun8i-v3-sl631-imx179.dtb \
sun8i-v3s-licheepi-zero.dtb \
sun8i-v3s-licheepi-zero-dock.dtb \
sun8i-v40-bananapi-m2-berry.dtb
@@ -1263,6 +1277,7 @@ dtb-$(CONFIG_ARCH_U8500) += \
ste-hrefv60plus-tvk.dtb \
ste-href520-tvk.dtb \
ste-ux500-samsung-golden.dtb \
+ ste-ux500-samsung-janice.dtb \
ste-ux500-samsung-skomer.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ld4-ref.dtb \
@@ -1292,6 +1307,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
wm8850-w70v2.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-cc108.dtb \
+ zynq-ebaz4205.dtb \
zynq-microzed.dtb \
zynq-parallella.dtb \
zynq-zc702.dtb \
@@ -1387,6 +1403,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-ast2600-evb.dtb \
aspeed-bmc-amd-ethanolx.dtb \
+ aspeed-bmc-ampere-mtjade.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-bytedance-g220a.dtb \
@@ -1399,6 +1416,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-wedge400.dtb \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
+ aspeed-bmc-ibm-everest.dtb \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
aspeed-bmc-intel-s2600wf.dtb \
@@ -1418,4 +1436,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-witherspoon.dtb \
aspeed-bmc-opp-zaius.dtb \
aspeed-bmc-portwell-neptune.dtb \
- aspeed-bmc-quanta-q71l.dtb
+ aspeed-bmc-quanta-q71l.dtb \
+ aspeed-bmc-supermicro-x11spi.dtb
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 7c6f2c11f0e1..902e295b309e 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -684,28 +684,31 @@
};
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
- slaves = <1>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
};
&tscadc {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index b43b94122d3c..d5f8d5e2eb5d 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -596,19 +596,17 @@
};
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
- dual_emac = <1>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
@@ -619,16 +617,16 @@
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&ethphy1>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
&mmc1 {
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index b958ab56a412..e923d065304d 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -474,31 +474,29 @@
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&ethphy1>;
phy-mode = "rmii";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
- dual_emac;
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
reset-delay-us = <2>; /* PHY datasheet states 1uS min */
diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
new file mode 100644
index 000000000000..270a3d5e8f98
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
+
+/* Based on code by myc_c335x.dts, MYiRtech.com */
+/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "MYIR MYC-AM335X";
+ compatible = "myir,myc-am335x", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd_core>;
+ voltage-tolerance = <2>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ vdd_mod: vdd_mod_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-mod";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_core: vdd_core_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-core";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mod>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_mod_pins>;
+
+ led_mod: led_mod {
+ label = "module:user";
+ gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ panic-indicator;
+ };
+ };
+};
+
+&cpsw_emac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mdio_pins_default>;
+ pinctrl-1 = <&mdio_pins_sleep>;
+ status = "okay";
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&nand_pins_default>;
+ pinctrl-1 = <&nand_pins_sleep>;
+ ranges = <0 0 0x8000000 0x1000000>;
+ status = "okay";
+
+ nand0: nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>;
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE_NONE>;
+ nand-bus-width = <8>;
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ ti,elm-id = <&elm>;
+ ti,nand-ecc-opt = "bch8";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default", "gpio", "sleep";
+ pinctrl-0 = <&i2c0_pins_default>;
+ pinctrl-1 = <&i2c0_pins_gpio>;
+ pinctrl-2 = <&i2c0_pins_sleep>;
+ clock-frequency = <400000>;
+ scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ vcc-supply = <&vdd_mod>;
+ };
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&eth_slave1_pins_default>;
+ pinctrl-1 = <&eth_slave1_pins_sleep>;
+ slaves = <1>;
+ status = "okay";
+};
+
+&rtc {
+ system-power-controller;
+};
+
+&am33xx_pinmux {
+ mdio_pins_default: pinmux_mdio_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* mdio_clk */
+ >;
+ };
+
+ mdio_pins_sleep: pinmux_mdio_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ eth_slave1_pins_default: pinmux_eth_slave1_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd0 */
+ >;
+ };
+
+ eth_slave1_pins_sleep: pinmux_eth_slave1_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ i2c0_pins_default: pinmux_i2c0_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SDA */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SCL */
+ >;
+ };
+
+ i2c0_pins_gpio: pinmux_i2c0_pins_gpio {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE7) /* gpio3[5] */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE7) /* gpio3[6] */
+ >;
+ };
+
+ i2c0_pins_sleep: pinmux_i2c0_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ led_mod_pins: pinmux_led_mod_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpio3[18] */
+ >;
+ };
+
+ nand_pins_default: pinmux_nand_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpio0[31] */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) /* gpmc_wen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) /* gpmc_be0n_cle */
+ >;
+ };
+
+ nand_pins_sleep: pinmux_nand_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts
new file mode 100644
index 000000000000..c996639874e6
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts
@@ -0,0 +1,536 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
+/* Based on code by myd_c335x.dts, MYiRtech.com */
+/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+
+/dts-v1/;
+
+#include "am335x-myirtech-myc.dtsi"
+
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "MYIR MYD-AM335X";
+ compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ clk12m: clk12m {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+
+ #clock-cells = <0>;
+ };
+
+ gpio_buttons: gpio_buttons {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_buttons_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button1: button@0 {
+ reg = <0>;
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ button2: button@1 {
+ reg = <1>;
+ label = "button2";
+ linux,code = <BTN_2>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&master_codec>;
+ simple-audio-card,frame-master = <&master_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ };
+
+ master_codec: simple-audio-card,codec@1 {
+ sound-dai = <&sgtl5000>;
+ };
+
+ simple-audio-card,codec@2 {
+ sound-dai = <&tda9988>;
+ };
+ };
+
+ vdd_5v0: vdd_5v0_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3: vdd_3v3_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v0>;
+ };
+};
+
+&cpsw_emac1 {
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+ phy1: ethernet-phy@6 {
+ reg = <6>;
+ eee-broken-1000t;
+ };
+};
+
+&dcan0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcan0_pins_default>;
+ pinctrl-1 = <&dcan0_pins_sleep>;
+ status = "okay";
+};
+
+&dcan1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcan1_pins_default>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+ status = "okay";
+};
+
+&ehrpwm0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ehrpwm0_pins_default>;
+ pinctrl-1 = <&ehrpwm0_pins_sleep>;
+ status = "okay";
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "gpio", "sleep";
+ pinctrl-0 = <&i2c1_pins_default>;
+ pinctrl-1 = <&i2c1_pins_gpio>;
+ pinctrl-2 = <&i2c1_pins_sleep>;
+ clock-frequency = <400000>;
+ scl-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ sgtl5000: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ reg =<0xa>;
+ clocks = <&clk12m>;
+ micbias-resistor-k-ohms = <4>;
+ micbias-voltage-m-volts = <2250>;
+ VDDA-supply = <&vdd_3v3>;
+ VDDIO-supply = <&vdd_3v3>;
+
+ #sound-dai-cells = <0>;
+ };
+
+ tda9988: tda9988@70 {
+ compatible = "nxp,tda998x";
+ reg =<0x70>;
+ audio-ports = <TDA998x_I2S 1>;
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ port@0 {
+ hdmi_0: endpoint@0 {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
+ };
+};
+
+&lcdc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcdc_pins_default>;
+ pinctrl-1 = <&lcdc_pins_sleep>;
+ blue-and-red-wiring = "straight";
+ status = "okay";
+
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&hdmi_0>;
+ };
+ };
+};
+
+&leds {
+ pinctrl-0 = <&led_mod_pins &leds_pins>;
+
+ led1: led1 {
+ label = "base:user1";
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ };
+
+ led2: led2 {
+ label = "base:user2";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ };
+};
+
+&mac {
+ pinctrl-0 = <&eth_slave1_pins_default>, <&eth_slave2_pins_default>;
+ pinctrl-1 = <&eth_slave1_pins_sleep>, <&eth_slave2_pins_sleep>;
+ slaves = <2>;
+};
+
+&mcasp0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp0_pins_default>;
+ pinctrl-1 = <&mcasp0_pins_sleep>;
+ op-mode = <0>;
+ tdm-slots = <2>;
+ serial-dir = <0 1 2 0>;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+ status = "okay";
+
+ #sound-dai-cells = <0>;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_sleep>;
+ cd-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_3v3>;
+ status = "okay";
+};
+
+&nand0 {
+ partition@0 {
+ label = "MLO";
+ reg = <0x00000 0x20000>;
+ };
+
+ partition@20000 {
+ label = "boot";
+ reg = <0x20000 0x80000>;
+ };
+};
+
+&tscadc {
+ status = "okay";
+
+ adc: adc {
+ ti,adc-channels = <0 1 2 3 4 5 6>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart1_pins_default>;
+ pinctrl-1 = <&uart1_pins_sleep>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart2_pins_default>;
+ pinctrl-1 = <&uart2_pins_sleep>;
+ status = "okay";
+};
+
+&usb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins>;
+};
+
+&usb0 {
+ dr_mode = "otg";
+};
+
+&usb0_phy {
+ vcc-supply = <&vdd_5v0>;
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&usb1_phy {
+ vcc-supply = <&vdd_5v0>;
+};
+
+&vdd_mod {
+ vin-supply = <&vdd_3v3>;
+};
+
+&am33xx_pinmux {
+ dcan0_pins_default: pinmux_dcan0_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan0_tx_mux2 */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2) /* dcan0_rx_mux2 */
+ >;
+ };
+
+ dcan0_pins_sleep: pinmux_dcan0_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ dcan1_pins_default: pinmux_dcan1_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan1_tx_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* dcan1_rx_mux0 */
+ >;
+ };
+
+ dcan1_pins_sleep: pinmux_dcan1_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ ehrpwm0_pins_default: pinmux_ehrpwm0_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT, MUX_MODE3) /* ehrpwm0A_mux1 */
+ >;
+ };
+
+ ehrpwm0_pins_sleep: pinmux_ehrpwm0_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ eth_slave2_pins_default: pinmux_eth_slave2_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd1 */)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd0 */)
+ >;
+ };
+
+ eth_slave2_pins_sleep: pinmux_eth_slave2_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ gpio_buttons_pins: pinmux_gpio_buttons_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpio3[0] */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT, MUX_MODE7) /* gpio0[29] */
+ >;
+ };
+
+ i2c1_pins_default: pinmux_i2c1_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SDA_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SCL_mux3 */
+ >;
+ };
+
+ i2c1_pins_gpio: pinmux_i2c1_pins_gpio {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE7) /* gpio0[4] */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE7) /* gpio0[5] */
+ >;
+ };
+
+ i2c1_pins_sleep: pinmux_i2c1_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ lcdc_pins_default: pinmux_lcdc_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) /* lcd_data0 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) /* lcd_data1 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) /* lcd_data2 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) /* lcd_data3 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) /* lcd_data4 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) /* lcd_data5 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) /* lcd_data6 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) /* lcd_data7 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) /* lcd_data8 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) /* lcd_data9 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) /* lcd_data10 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) /* lcd_data11 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) /* lcd_data12 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) /* lcd_data13 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) /* lcd_data14 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) /* lcd_data15 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_vsync */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_hsync */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) /* lcd_pclk */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) /* lcd_ac_bias_en */
+ >;
+ };
+
+ lcdc_pins_sleep: pinmux_lcdc_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ leds_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* gpio0[27] */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE7) /* gpio0[3] */
+ >;
+ };
+
+ mcasp0_pins_default: pinmux_mcasp0_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_aclkx_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_fsx_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mcasp0_axr2_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_axr1_mux0 */
+ >;
+ };
+
+ mcasp0_pins_sleep: pinmux_mcasp0_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins_default: pinmux_mmc1_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_clk */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_cmd */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* gpio3[21] */
+ >;
+ };
+
+ mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart0_rxd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart0_txd */
+ >;
+ };
+
+ uart1_pins_default: pinmux_uart1_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart1_rxd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart1_txd */
+ >;
+ };
+
+ uart1_pins_sleep: pinmux_uart1_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ uart2_pins_default: pinmux_uart2_pins_default {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE6) /* uart2_rxd_mux1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_OUTPUT, MUX_MODE6) /* uart2_txd_mux1 */
+ >;
+ };
+
+ uart2_pins_sleep: pinmux_uart2_pins_sleep {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ usb_pins: pinmux_usb_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB0_DRVVBUS */
+ AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB1_DRVVBUS */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 78088506d25b..1fb22088caeb 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -765,6 +765,55 @@
phys = <&phy_gmii_sel 2 1>;
};
};
+
+ mac_sw: switch@0 {
+ compatible = "ti,am335x-cpsw-switch", "ti,cpsw-switch";
+ reg = <0x0 0x4000>;
+ ranges = <0 0 0x4000>;
+ clocks = <&cpsw_125mhz_gclk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ syscon = <&scm_conf>;
+ status = "disabled";
+
+ interrupts = <40 41 42 43>;
+ interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 1>;
+ };
+
+ cpsw_port2: port@2 {
+ reg = <2>;
+ label = "port2";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 1>;
+ };
+ };
+
+ davinci_mdio_sw: mdio@1000 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ clocks = <&cpsw_125mhz_gclk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ reg = <0x1000 0x100>;
+ };
+
+ cpts {
+ clocks = <&cpsw_cpts_rft_clk>;
+ clock-names = "cpts";
+ };
+ };
};
target-module@180000 { /* 0x4a180000, ap 5 10.0 */
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 37758761cd88..1b8f3a28af05 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -39,3 +39,7 @@
&m_can0 {
status = "disabled";
};
+
+&emif1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 827e82be2201..fb9c8a0b241c 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -148,6 +148,8 @@
reg = <0>;
label = "pxa3xx_nand-0";
nand-rb = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
marvell,nand-keep-config;
nand-on-flash-bbt;
};
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
index b3728de3bd3f..ec134e22bae3 100644
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -70,6 +70,9 @@
system-leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_system_led_pins>;
+
status-led {
label = "helios4:green:status";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
@@ -86,6 +89,9 @@
io-leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_io_led_pins>;
+
sata1-led {
label = "helios4:green:ata1";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
@@ -121,11 +127,15 @@
fan1: j10-pwm {
compatible = "pwm-fan";
pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_fan1_pins>;
};
fan2: j17-pwm {
compatible = "pwm-fan";
pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_fan2_pins>;
};
usb2_phy: usb2-phy {
@@ -286,16 +296,22 @@
"mpp39", "mpp40";
marvell,function = "sd0";
};
- helios_led_pins: helios-led-pins {
- marvell,pins = "mpp24", "mpp25",
- "mpp49", "mpp50",
+ helios_system_led_pins: helios-system-led-pins {
+ marvell,pins = "mpp24", "mpp25";
+ marvell,function = "gpio";
+ };
+ helios_io_led_pins: helios-io-led-pins {
+ marvell,pins = "mpp49", "mpp50",
"mpp52", "mpp53",
"mpp54";
marvell,function = "gpio";
};
- helios_fan_pins: helios-fan-pins {
- marvell,pins = "mpp41", "mpp43",
- "mpp48", "mpp55";
+ helios_fan1_pins: helios_fan1_pins {
+ marvell,pins = "mpp41", "mpp43";
+ marvell,function = "gpio";
+ };
+ helios_fan2_pins: helios_fan2_pins {
+ marvell,pins = "mpp48", "mpp55";
marvell,function = "gpio";
};
microsom_spi1_cs_pins: spi1-cs-pins {
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 89be13197780..2772796e215e 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -237,3 +237,11 @@
&fsim0 {
status = "okay";
};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
index 96ff0aea64e5..ac2d04cfaf2f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -218,7 +218,7 @@
&lpc_snoop {
status = "okay";
- snoop-ports = <0x80>;
+ snoop-ports = <0x80>, <0x81>;
};
&lpc_ctrl {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
new file mode 100644
index 000000000000..8f5ec22e51c2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Ampere Mt. Jade BMC";
+ compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ shutdown_ack {
+ label = "SHUTDOWN_ACK";
+ gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(G, 2)>;
+ };
+
+ reboot_ack {
+ label = "REBOOT_ACK";
+ gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 3)>;
+ };
+
+ S0_overtemp {
+ label = "S0_OVERTEMP";
+ gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(G, 3)>;
+ };
+
+ S0_hightemp {
+ label = "S0_HIGHTEMP";
+ gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 0)>;
+ };
+
+ S0_cpu_fault {
+ label = "S0_CPU_FAULT";
+ gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(J, 1)>;
+ };
+
+ S1_overtemp {
+ label = "S1_OVERTEMP";
+ gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 6)>;
+ };
+
+ S1_hightemp {
+ label = "S1_HIGHTEMP";
+ gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(AB, 0)>;
+ };
+
+ S1_cpu_fault {
+ label = "S1_CPU_FAULT";
+ gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(Z, 1)>;
+ };
+
+ id_button {
+ label = "ID_BUTTON";
+ gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Q, 5)>;
+ };
+
+ };
+
+ gpioA0mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ adc0mux: adc0mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 0>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc1mux: adc1mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 1>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc2mux: adc2mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 2>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc3mux: adc3mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 3>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc4mux: adc4mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 4>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc5mux: adc5mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 5>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc6mux: adc6mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 6>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc7mux: adc7mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 7>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc8mux: adc8mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 8>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc9mux: adc9mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 9>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc10mux: adc10mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 10>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc11mux: adc11mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 11>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc12mux: adc12mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 12>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ adc13mux: adc13mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 13>;
+ #io-channel-cells = <1>;
+ io-channel-names = "parent";
+ mux-controls = <&gpioA0mux>;
+ channels = "s0", "s1";
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0mux 0>, <&adc0mux 1>,
+ <&adc1mux 0>, <&adc1mux 1>,
+ <&adc2mux 0>, <&adc2mux 1>,
+ <&adc3mux 0>, <&adc3mux 1>,
+ <&adc4mux 0>, <&adc4mux 1>,
+ <&adc5mux 0>, <&adc5mux 1>,
+ <&adc6mux 0>, <&adc6mux 1>,
+ <&adc7mux 0>, <&adc7mux 1>,
+ <&adc8mux 0>, <&adc8mux 1>,
+ <&adc9mux 0>, <&adc9mux 1>,
+ <&adc10mux 0>, <&adc10mux 1>,
+ <&adc11mux 0>, <&adc11mux 1>,
+ <&adc12mux 0>, <&adc12mux 1>,
+ <&adc13mux 0>, <&adc13mux 1>;
+ };
+
+ iio-hwmon-adc14 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 14>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ /* spi-max-frequency = <50000000>; */
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ /* spi-max-frequency = <100000000>; */
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_ncts1_default
+ &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default
+ &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd4_default
+ &pinctrl_rxd4_default>;
+};
+
+/* The BMC's uart */
+&uart5 {
+ status = "okay";
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+ eeprom@50 {
+ compatible = "microchip,24c64", "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ inlet_mem2: tmp175@28 {
+ compatible = "ti,tmp175";
+ reg = <0x28>;
+ };
+
+ inlet_cpu: tmp175@29 {
+ compatible = "ti,tmp175";
+ reg = <0x29>;
+ };
+
+ inlet_mem1: tmp175@2a {
+ compatible = "ti,tmp175";
+ reg = <0x2a>;
+ };
+
+ outlet_cpu: tmp175@2b {
+ compatible = "ti,tmp175";
+ reg = <0x2b>;
+ };
+
+ outlet1: tmp175@2c {
+ compatible = "ti,tmp175";
+ reg = <0x2c>;
+ };
+
+ outlet2: tmp175@2d {
+ compatible = "ti,tmp175";
+ reg = <0x2d>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+ psu@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ psu@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@1 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@2 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@5 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan@6 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan@7 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+
+ fan@8 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan@9 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+ };
+
+ fan@10 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+ };
+
+ fan@11 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+ };
+
+};
+
+&vhub {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&gpio {
+ gpio-line-names =
+ /*A0-A7*/ "","","","S0_BMC_SPECIAL_BOOT","","","","",
+ /*B0-B7*/ "BMC_SELECT_EEPROM","","","",
+ "POWER_BUTTON","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
+ "S1_DDR_SAVE","","",
+ /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
+ "","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","",
+ /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
+ "","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","UID_BUTTON","","",
+ /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
+ "S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
+ /*AA0-AA7*/ "","","","","","","","",
+ /*AB0-AB7*/ "S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
+ "S1_BMC_DDR_ADR","","","","",
+ /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
+ "BMC_OCP_PG";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
index 2feb25b0e43b..5ef88c377358 100644
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -446,7 +446,11 @@
&i2c4 {
status = "okay";
-
+ ipmb0@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
};
&i2c5 {
@@ -901,14 +905,14 @@
&gpio {
pin_gpio_i3 {
gpio-hog;
- gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+ gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "NCSI_BMC_R_SEL";
};
pin_gpio_b6 {
gpio-hog;
- gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+ gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "EN_NCSI_SWITCH_N";
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
new file mode 100644
index 000000000000..6bd876657bb8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -0,0 +1,775 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Everest";
+ compatible = "ibm,everest-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c100 = &cfam0_i2c0;
+ i2c101 = &cfam0_i2c1;
+ i2c110 = &cfam0_i2c10;
+ i2c111 = &cfam0_i2c11;
+ i2c112 = &cfam0_i2c12;
+ i2c113 = &cfam0_i2c13;
+ i2c114 = &cfam0_i2c14;
+ i2c115 = &cfam0_i2c15;
+ i2c202 = &cfam1_i2c2;
+ i2c203 = &cfam1_i2c3;
+ i2c210 = &cfam1_i2c10;
+ i2c211 = &cfam1_i2c11;
+ i2c214 = &cfam1_i2c14;
+ i2c215 = &cfam1_i2c15;
+ i2c216 = &cfam1_i2c16;
+ i2c217 = &cfam1_i2c17;
+ i2c300 = &cfam2_i2c0;
+ i2c301 = &cfam2_i2c1;
+ i2c310 = &cfam2_i2c10;
+ i2c311 = &cfam2_i2c11;
+ i2c312 = &cfam2_i2c12;
+ i2c313 = &cfam2_i2c13;
+ i2c314 = &cfam2_i2c14;
+ i2c315 = &cfam2_i2c15;
+ i2c402 = &cfam3_i2c2;
+ i2c403 = &cfam3_i2c3;
+ i2c410 = &cfam3_i2c10;
+ i2c411 = &cfam3_i2c11;
+ i2c414 = &cfam3_i2c14;
+ i2c415 = &cfam3_i2c15;
+ i2c416 = &cfam3_i2c16;
+ i2c417 = &cfam3_i2c17;
+
+ serial4 = &uart5;
+
+ spi10 = &cfam0_spi0;
+ spi11 = &cfam0_spi1;
+ spi12 = &cfam0_spi2;
+ spi13 = &cfam0_spi3;
+ spi20 = &cfam1_spi0;
+ spi21 = &cfam1_spi1;
+ spi22 = &cfam1_spi2;
+ spi23 = &cfam1_spi3;
+ spi30 = &cfam2_spi0;
+ spi31 = &cfam2_spi1;
+ spi32 = &cfam2_spi2;
+ spi33 = &cfam2_spi3;
+ spi40 = &cfam3_spi0;
+ spi41 = &cfam3_spi1;
+ spi42 = &cfam3_spi2;
+ spi43 = &cfam3_spi3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b8000000 {
+ no-map;
+ reg = <0xb8000000 0x04000000>; /* 64M */
+ };
+
+ /* 48MB region from the end of flash to start of vga memory */
+ ramoops@bc000000 {
+ compatible = "ramoops";
+ reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ no-map;
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ };
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+};
+
+&fsim0 {
+ status = "okay";
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ /*
+ * CFAM Reset is supposed to be active low but pass1 hardware is wired
+ * active high.
+ */
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_i2c0: i2c-bus@0 {
+ reg = <0>; /* OMI01 */
+ };
+
+ cfam0_i2c1: i2c-bus@1 {
+ reg = <1>; /* OMI23 */
+ };
+
+ cfam0_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam0_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam0_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ };
+
+ cfam0_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ };
+
+ cfam0_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam0_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ0: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub0: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&fsi_hub0 {
+ cfam@1,0 {
+ reg = <1 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <1>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_i2c2: i2c-bus@2 {
+ reg = <2>; /* OMI45 */
+ };
+
+ cfam1_i2c3: i2c-bus@3 {
+ reg = <3>; /* OMI67 */
+ };
+
+ cfam1_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam1_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam1_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam1_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+
+ cfam1_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ };
+
+ cfam1_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ1: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub1: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
+
+ cfam@2,0 {
+ reg = <2 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <2>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ };
+
+ cfam2_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ };
+
+ cfam2_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam2_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam2_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ };
+
+ cfam2_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ };
+
+ cfam2_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam2_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam2_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam2_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam2_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ2: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub2: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
+
+ cfam@3,0 {
+ reg = <3 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <3>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ };
+
+ cfam3_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ };
+
+ cfam3_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam3_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam3_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam3_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+
+ cfam3_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ };
+
+ cfam3_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ3: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub3: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+ reg = <1>;
+};
+
+&fsi_occ1 {
+ reg = <2>;
+};
+
+&fsi_occ2 {
+ reg = <3>;
+};
+
+&fsi_occ3 {
+ reg = <4>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&kcs4 {
+ compatible = "openbmc,mctp-lpc";
+ status = "okay";
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&xdma {
+ status = "okay";
+ memory-region = <&vga_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index a4b77aec5424..6c9804d2f3b4 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -195,6 +195,7 @@
&emmc {
status = "okay";
+ clk-phase-mmc-hs200 = <180>, <180>;
};
&fsim0 {
@@ -579,7 +580,7 @@
gpio-controller;
#gpio-cells = <2>;
- smbus0 {
+ smbus0-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
index 62a3ab4c1866..07593897fc9a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -204,6 +204,39 @@
};
+&gpio {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","front-psu","checkstop","cfam-reset","","","init-ok",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "ps0-presence","ps1-presence","","","front-memory","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","front-fan","","","",
+ /*I0-I7*/ "front-syshealth","front-syshot","mux-gpios","enable-gpios","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","power","trans-gpios","","","","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","identify",
+ /*AA0-AA7*/ "clock-gpios","","data-gpios","","","","","",
+ /*AB0-AB7*/ "","","","","","","","",
+ /*AC0-AC7*/ "","","","","","","","";
+};
+
&fmc {
status = "okay";
@@ -756,12 +789,12 @@
status = "okay";
power-supply@58 {
- compatible = "pmbus";
+ compatible = "inspur,ipsps1";
reg = <0x58>;
};
power-supply@59 {
- compatible = "pmbus";
+ compatible = "inspur,ipsps1";
reg = <0x59>;
};
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index cb85168f6761..577c211c469e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -827,7 +827,7 @@
gpio-controller;
#gpio-cells = <2>;
- smbus0 {
+ smbus0-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -852,7 +852,7 @@
gpio-controller;
#gpio-cells = <2>;
- smbus1 {
+ smbus1-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -900,7 +900,7 @@
gpio-controller;
#gpio-cells = <2>;
- smbus2 {
+ smbus2-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -925,7 +925,7 @@
gpio-controller;
#gpio-cells = <2>;
- smbus3 {
+ smbus3-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -992,7 +992,7 @@
gpio-controller;
#gpio-cells = <2>;
- smbus4 {
+ smbus4-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -1017,7 +1017,7 @@
gpio-controller;
#gpio-cells = <2>;
- smbus5 {
+ smbus5-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -1065,7 +1065,7 @@
gpio-controller;
#gpio-cells = <2>;
- smbus6 {
+ smbus6-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -1090,7 +1090,7 @@
gpio-controller;
#gpio-cells = <2>;
- smbus7 {
+ smbus7-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
index b648e468e9db..8503152faaf0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -582,6 +582,11 @@
/* TMP275A */
/* TMP275A */
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
index 4a1ca8f5b6a7..03c161493ffc 100644
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
@@ -121,6 +121,8 @@
pca9555@27 {
compatible = "nxp,pca9555";
reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
new file mode 100644
index 000000000000..bc16ad2b5c80
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Super Micro Computer, Inc
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+ model = "X11SPI BMC";
+ compatible = "supermicro,x11spi-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@7f000000 {
+ no-map;
+ reg = <0x7f000000 0x01000000>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+};
+
+&gpio {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b3dafbc8caca..e7a45ba18fc9 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -375,6 +375,7 @@
compatible = "aspeed,ast2400-lpc-snoop";
reg = <0x10 0x8>;
interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5bc0de0f3365..21930521a986 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -497,6 +497,7 @@
compatible = "aspeed,ast2500-lpc-snoop";
reg = <0x10 0x8>;
interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 810b0676ab03..3ee470c2b7b5 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -524,6 +524,7 @@
compatible = "aspeed,ast2600-lpc-snoop";
reg = <0x0 0x80>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 9ce513dd514b..c4b3750495da 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -341,7 +341,6 @@
input@0 {
reg = <0>;
- atmel,wakeup-type = "low";
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 0e159f879c15..84e1180f3e89 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -142,7 +142,6 @@
input@0 {
reg = <0>;
- atmel,wakeup-type = "low";
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index a06700e53e4c..025a78310e3a 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -43,14 +43,20 @@
&i2c0 {
pinctrl-0 = <&pinctrl_i2c0_default>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ pinctrl-names = "default", "gpio";
+ sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c1 {
dmas = <0>, <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
mcp16502@5b {
@@ -258,12 +264,24 @@
bias-disable;
};
+ pinctrl_i2c0_gpio: i2c0_gpio {
+ pinmux = <PIN_PD21__GPIO>,
+ <PIN_PD22__GPIO>;
+ bias-disable;
+ };
+
pinctrl_i2c1_default: i2c1_default {
pinmux = <PIN_PD19__TWD1>,
<PIN_PD20__TWCK1>;
bias-disable;
};
+ pinctrl_i2c1_gpio: i2c1_gpio {
+ pinmux = <PIN_PD19__GPIO>,
+ <PIN_PD20__GPIO>;
+ bias-disable;
+ };
+
pinctrl_macb0_default: macb0_default {
pinmux = <PIN_PB14__GTXCK>,
<PIN_PB15__GTXEN>,
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 6b38fa3f5568..180a08765cb8 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -209,7 +209,6 @@
input@0 {
reg = <0>;
- atmel,wakeup-type = "low";
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 6783cf16ff81..46722a163184 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -697,7 +697,6 @@
input@0 {
reg = <0>;
- atmel,wakeup-type = "low";
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index c894c7c788a9..8de57d164acd 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -206,7 +206,6 @@
input@0 {
reg = <0>;
- atmel,wakeup-type = "low";
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 058fae1b4a76..4e7cf21f124c 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -351,7 +351,6 @@
input@0 {
reg = <0>;
- atmel,wakeup-type = "low";
};
};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 58ec1b2f8ef6..cc58f2b926b9 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -27,7 +27,7 @@
bootargs = "console=ttyS0,115200n8";
};
- cpus {
+ cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 403bacf986eb..3b4ab947492a 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -25,6 +25,7 @@
emmc2bus = &emmc2bus;
ethernet0 = &genet;
pcie0 = &pcie0;
+ blconfig = &blconfig;
};
leds {
@@ -218,6 +219,22 @@
status = "okay";
};
+&rmem {
+ /*
+ * RPi4's co-processor will copy the board's bootloader configuration
+ * into memory for the OS to consume. It'll also update this node with
+ * its placement information.
+ */
+ blconfig: nvram@0 {
+ compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x0 0x0>;
+ no-map;
+ status = "disabled";
+ };
+};
+
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 4847dd305317..462b1dfb0385 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -308,6 +308,22 @@
#reset-cells = <1>;
};
+ bsc_intr: interrupt-controller@7ef00040 {
+ compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+ reg = <0x7ef00040 0x30>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ aon_intr: interrupt-controller@7ef00100 {
+ compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+ reg = <0x7ef00100 0x30>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
hdmi0: hdmi@7ef00700 {
compatible = "brcm,bcm2711-hdmi0";
reg = <0x7ef00700 0x300>,
@@ -330,6 +346,11 @@
"hd";
clock-names = "hdmi", "bvb", "audio", "cec";
resets = <&dvp 0>;
+ interrupt-parent = <&aon_intr>;
+ interrupts = <0>, <1>, <2>,
+ <3>, <4>, <5>;
+ interrupt-names = "cec-tx", "cec-rx", "cec-low",
+ "wakeup", "hpd-connected", "hpd-removed";
ddc = <&ddc0>;
dmas = <&dma 10>;
dma-names = "audio-rx";
@@ -341,6 +362,8 @@
reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
reg-names = "bsc", "auto-i2c";
clock-frequency = <97500>;
+ interrupt-parent = <&bsc_intr>;
+ interrupts = <0>;
status = "disabled";
};
@@ -367,6 +390,11 @@
ddc = <&ddc1>;
clock-names = "hdmi", "bvb", "audio", "cec";
resets = <&dvp 1>;
+ interrupt-parent = <&aon_intr>;
+ interrupts = <8>, <7>, <6>,
+ <9>, <10>, <11>;
+ interrupt-names = "cec-tx", "cec-rx", "cec-low",
+ "wakeup", "hpd-connected", "hpd-removed";
dmas = <&dma 17>;
dma-names = "audio-rx";
status = "disabled";
@@ -377,6 +405,8 @@
reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
reg-names = "bsc", "auto-i2c";
clock-frequency = <97500>;
+ interrupt-parent = <&bsc_intr>;
+ interrupts = <1>;
status = "disabled";
};
};
@@ -540,6 +570,7 @@
&dsi1 {
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "brcm,bcm2711-dsi1";
};
&gpio {
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 6194857f8a02..1114c592e461 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -191,7 +191,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -209,7 +209,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -227,7 +227,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -245,7 +245,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -446,7 +446,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
};
};
@@ -461,7 +461,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 56fa951bc86f..c1d91424e658 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -34,19 +34,19 @@
linux,usable-memory = <0x00000000 0x20000000>; /* 512 MB */
};
- leds {
+ led-controller {
compatible = "pwm-leds";
pinctrl-0 = <&ledpwm_pmux>;
pinctrl-names = "default";
- white {
+ led-1 {
label = "white";
pwms = <&pwm 0 600000 0>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
- red {
+ led-2 {
label = "red";
pwms = <&pwm 1 600000 0>;
max-brightness = <255>;
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 6f30d7eb3b41..b2768f7a3185 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -181,7 +181,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -199,7 +199,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -217,7 +217,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -235,7 +235,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -473,7 +473,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
};
};
@@ -518,7 +518,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
};
};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index b6a0acac6836..598a46f96a82 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -252,7 +252,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -270,7 +270,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -288,7 +288,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -306,7 +306,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -552,7 +552,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
};
};
@@ -613,7 +613,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
};
};
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index cad58f733bd6..6d2cca6b4488 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -112,6 +112,8 @@
regulator-name = "lp8733-ldo0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
};
lp8733_ldo1_reg: ldo1 {
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index 2f326151116b..a09e7bd77fc7 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -9,6 +9,13 @@
compatible = "ti,dra762", "ti,dra7";
ocp {
+ emif1: emif@4c000000 {
+ compatible = "ti,emif-dra7xx";
+ reg = <0x4c000000 0x200>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
target-module@42c01900 {
compatible = "ti,sysc-dra7-mcan", "ti,sysc";
ranges = <0x0 0x42c00000 0x2000>;
@@ -133,3 +140,32 @@
/* dra76x is not affected by i887 */
max-frequency = <96000000>;
};
+
+&cpu0_opp_table {
+ opp_plus@1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1250000 950000 1250000>,
+ <1250000 950000 1250000>;
+ opp-supported-hw = <0xFF 0x08>;
+ };
+};
+
+&opp_supply_mpu {
+ ti,efuse-settings = <
+ /* uV offset */
+ 1060000 0x0
+ 1160000 0x4
+ 1210000 0x8
+ 1250000 0xC
+ >;
+};
+
+&abb_mpu {
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1160000 0 0x4 0 0x02000000 0x01F00000
+ 1210000 0 0x8 0 0x02000000 0x01F00000
+ 1250000 0 0xC 0 0x02000000 0x01F00000
+ >;
+};
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 3af1ab4458ef..cfb239d5186a 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -278,6 +278,12 @@
};
&uart1 {
+ /* J4, through-hole */
+ status = "okay";
+};
+
+&uart4 {
+ /* TP198, next to J4, SMD pads */
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 04290ec4583a..829c05b2c405 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -79,7 +79,7 @@
pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx3>;
- interrupts = <5 IRQ_TYPE_NONE>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps14_irq>;
reg = <0x66>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 69451566945d..fae046e08a5d 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -200,7 +200,7 @@
pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
- interrupts = <7 IRQ_TYPE_NONE>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
reg = <0x66>;
wakeup-source;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index a26e3e582a7e..d64ccf4b7d32 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -270,7 +270,7 @@
pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
- interrupts = <7 IRQ_TYPE_NONE>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
reg = <0x66>;
wakeup-source;
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index a0c3bab382ae..304a8ee2364c 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -560,27 +560,33 @@
regulator-boot-on;
};
- charger_reg: CHARGER {
- regulator-name = "CHARGER";
- regulator-min-microamp = <60000>;
- regulator-max-microamp = <2580000>;
+ EN32KHZ_AP {
+ regulator-name = "EN32KHZ_AP";
regulator-always-on;
};
- chargercv_reg: CHARGER_CV {
- regulator-name = "CHARGER_CV";
- regulator-min-microvolt = <3800000>;
- regulator-max-microvolt = <4100000>;
+ EN32KHZ_CP {
+ regulator-name = "EN32KHZ_CP";
regulator-always-on;
};
- EN32KHZ_AP {
- regulator-name = "EN32KHZ_AP";
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <950000>;
+ };
+
+ chargercv_reg: CHARGER_CV {
+ regulator-name = "CHARGER_CV";
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
regulator-always-on;
};
- EN32KHZ_CP {
- regulator-name = "EN32KHZ_CP";
+ CHARGER_TOPOFF {
+ regulator-name = "CHARGER_TOPOFF";
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 9d2baea62d0d..fba1462b19df 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -109,7 +109,7 @@
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
wakeup-source;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index bf457d0c02eb..1aad4859c5f1 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -349,7 +349,7 @@
reg = <0x66>;
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps11_irq>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index d0df560eb0db..6d690b1db099 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -509,7 +509,7 @@
samsung,s2mps11-acokb-ground;
interrupt-parent = <&gpx0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps11_irq>;
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index fe9d34c23374..2ddb7a5f12b3 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -188,7 +188,7 @@
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy 1>;
+ phys = <&usb2_phy 0>;
phy-names = "host";
};
@@ -196,12 +196,12 @@
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy 1>;
+ phys = <&usb2_phy 0>;
phy-names = "host";
};
usb2_phy: phy@12130000 {
- compatible = "samsung,exynos5250-usb2-phy";
+ compatible = "samsung,exynos5420-usb2-phy";
reg = <0x12130000 0x100>;
#phy-cells = <1>;
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index bbe52150b165..84d0176d5193 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -948,6 +948,16 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ usb1_pins_b: usb1@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__USB1_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
usb0_id_pins_a: usb0id@0 {
reg = <0>;
fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index 665d63765cdc..d9de9b4f0c52 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -238,7 +238,6 @@
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
- clock-names = "xclk";
DCVDD-supply = <&reg_audio>;
DBVDD-supply = <&reg_audio>;
AVDD-supply = <&reg_audio>;
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts
new file mode 100644
index 000000000000..333c306aa946
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-plybas.dts
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6dl.dtsi"
+
+/ {
+ model = "Plymovent BAS board";
+ compatible = "ply,plybas", "fsl,imx6dl";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@20 {
+ label = "START";
+ linux,code = <31>;
+ gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+ };
+
+ button@21 {
+ label = "CLEAN";
+ linux,code = <46>;
+ gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-0 {
+ label = "debug0";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ label = "debug1";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "light_tower1";
+ gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-3 {
+ label = "light_tower2";
+ gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-4 {
+ label = "light_tower3";
+ gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-5 {
+ label = "light_tower4";
+ gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ clk50m_phy: phy-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <&reg_5v0>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ xceiver-supply = <&reg_5v0>;
+ status = "okay";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clk50m_phy>;
+ clock-names = "ipg", "ahb", "ptp";
+ phy-handle = <&rgmii_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Microchip KSZ8081RNA PHY */
+ rgmii_phy: ethernet-phy@0 {
+ reg = <0>;
+ interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "", "SD1_CD", "", "", "", "", "", "",
+ "DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "ECSPI1_SS1", "", "USB_EXT_PWR", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "CAN1_SR", "CAN2_SR", "", "",
+ "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "IMX6_IN12", "IMX6_HMI",
+ "IMX6_IN11", "IMX6_BUZZER", "IMX6_LED1", "IMX6_LED2",
+ "IMX6_LED3", "IMX6_LED4", "ETH_RESET", "IMX6_ANA_OUT_SD",
+ "IMX6_ANA_OUT_ERR", "IMX6_ANA_OUT", "ETH_INTRP", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "", "", "IMX6_RELAY1", "IMX6_RELAY2", "",
+ "IMX6_IN1", "IMX6_IN2", "IMX6_IN3", "IMX6_IN4", "IMX6_IN5",
+ "IMX6_IN6", "IMX6_IN7", "IMX6_IN8",
+ "IMX6_IN9", "IMX6_IN10", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ /* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ temperature-sensor@70 {
+ compatible = "ti,tmp103";
+ reg = <0x70>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 20>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbphynop1 {
+ status = "disabled";
+};
+
+&usbphynop2 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
+ /* CAN1_SR */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
+ /* CAN2_SR */
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b000
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x3008
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x3008
+ /* CS */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x3008
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ /* DEBUG_0 */
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ /* DEBUG_1 */
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+
+ /* LED1 (lighttower) */
+ MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x13070
+ /* LED2 (lighttower) */
+ MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x13070
+ /* LED3 (lighttower) */
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x13070
+ /* LED4 (lighttower) */
+ MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x13070
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ /* YaCO AUX Uart */
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x130b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
new file mode 100644
index 000000000000..4d0d3d3386af
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6dl.dtsi"
+
+/ {
+ model = "Plymovent M2M board";
+ compatible = "ply,plym2m", "fsl,imx6dl";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000 0>;
+ brightness-levels = <0 1000>;
+ num-interpolated-steps = <20>;
+ default-brightness-level = <19>;
+ power-supply = <&reg_12v0>;
+ };
+
+ display {
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-0 = <&pinctrl_ipu1_disp>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-0 {
+ label = "debug0";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ panel {
+ compatible = "edt,etm0700g0bdh6";
+ backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
+ clk50m_phy: phy-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <&reg_5v0>;
+ status = "okay";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+
+ touchscreen@0 {
+ compatible = "ti,tsc2046";
+ reg = <0>;
+ pinctrl-0 = <&pinctrl_tsc2046>;
+ pinctrl-names ="default";
+ spi-max-frequency = <100000>;
+ interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
+ pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ touchscreen-max-pressure = <4095>;
+
+ ti,vref-delay-usecs = /bits/ 16 <100>;
+ ti,x-plate-ohms = /bits/ 16 <800>;
+ ti,y-plate-ohms = /bits/ 16 <300>;
+
+ wakeup-source;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clk50m_phy>;
+ clock-names = "ipg", "ahb", "ptp";
+ phy-handle = <&rgmii_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Microchip KSZ8081RNA PHY */
+ rgmii_phy: ethernet-phy@0 {
+ reg = <0>;
+ interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "CAN1_TERM", "SD1_CD", "", "", "", "", "", "",
+ "DEBUG_0", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "ECSPI2_SS0", "", "", "", "TSC_BUSY", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "ECSPI1_SS1", "TSC_PENIRQ", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "CAN1_SR", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "ETH_RESET", "ETH_INTRP",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ /* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ temperature-sensor@70 {
+ compatible = "ti,tmp103";
+ reg = <0x70>;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display_in>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbphynop1 {
+ status = "disabled";
+};
+
+&usbphynop2 {
+ status = "disabled";
+};
+
+&usbotg {
+ phy_type = "utmi";
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ disable-wp;
+ cap-sd-highspeed;
+ no-mmc;
+ no-sdio;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
+ /* CAN1_SR */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
+ /* CAN1_TERM */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b000
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x3008
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x3008
+ /* CS */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x3008
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x10000
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x3008
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x3008
+ /* CS */
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x3008
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ipu1_disp: ipudisp1grp {
+ fsl,pins = <
+ /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8
+ >;
+ };
+
+ pinctrl_tsc2046: tsc2046grp {
+ fsl,pins = <
+ /* TSC_PENIRQ */
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1
+ /* TSC_BUSY */
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts
new file mode 100644
index 000000000000..a35a1c66e770
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/tvp5150.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+#include "imx6dl.dtsi"
+
+/ {
+ model = "Protonic MVT board";
+ compatible = "prt,prtmvt", "fsl,imx6dl";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm1 0 5000000 0>;
+ brightness-levels = <0 16 64 255>;
+ num-interpolated-steps = <16>;
+ default-brightness-level = <1>;
+ power-supply = <&reg_3v3>;
+ enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ connector {
+ compatible = "composite-video-connector";
+ label = "Composite0";
+ sdtv-standards = <SDTV_STD_PAL_B>;
+
+ port {
+ comp0_out: endpoint {
+ remote-endpoint = <&tvp5150_comp0_in>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+ autorepeat;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ f1 {
+ label = "GPIO Key F1";
+ linux,code = <KEY_F1>;
+ gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+ };
+
+ f2 {
+ label = "GPIO Key F2";
+ linux,code = <KEY_F2>;
+ gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+ };
+
+ f3 {
+ label = "GPIO Key F3";
+ linux,code = <KEY_F3>;
+ gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+ };
+
+ f4 {
+ label = "GPIO Key F4";
+ linux,code = <KEY_F4>;
+ gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+ };
+
+ f5 {
+ label = "GPIO Key F5";
+ linux,code = <KEY_F5>;
+ gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+ };
+
+ cycle {
+ label = "GPIO Key CYCLE";
+ linux,code = <KEY_CYCLEWINDOWS>;
+ gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+ };
+
+ esc {
+ label = "GPIO Key ESC";
+ linux,code = <KEY_ESC>;
+ gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+ };
+
+ up {
+ label = "GPIO Key UP";
+ linux,code = <KEY_UP>;
+ gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+ };
+
+ down {
+ label = "GPIO Key DOWN";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+ };
+
+ ok {
+ label = "GPIO Key OK";
+ linux,code = <KEY_OK>;
+ gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+ };
+
+ f6 {
+ label = "GPIO Key F6";
+ linux,code = <KEY_F6>;
+ gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+ };
+
+ f7 {
+ label = "GPIO Key F7";
+ linux,code = <KEY_F7>;
+ gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+ };
+
+ f8 {
+ label = "GPIO Key F8";
+ linux,code = <KEY_F8>;
+ gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+ };
+
+ f9 {
+ label = "GPIO Key F9";
+ linux,code = <KEY_F9>;
+ gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+ };
+
+ f10 {
+ label = "GPIO Key F10";
+ linux,code = <KEY_F10>;
+ gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-0 {
+ label = "debug0";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "debug1";
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ };
+
+ led-2 {
+ label = "power_led";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ panel {
+ compatible = "kyo,tcg070wvlq", "lg,lb070wv8";
+ backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ clk50m_phy: phy-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_h1_vbus: regulator-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "h1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_otg_vbus: regulator-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "otg-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "prti6q-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Line", "Line In Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "External Speaker";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "External Speaker", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ system-clock-frequency = <0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ bitclock-master;
+ frame-master;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ mux-ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN 0
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TFSDIR 0
+ IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ mux-pins3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ 0 IMX_AUDMUX_V2_PDCR_TXRXEN
+ >;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clk50m_phy>;
+ clock-names = "ipg", "ahb", "ptp";
+ phy-handle = <&rmii_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Microchip KSZ8081RNA PHY */
+ rmii_phy: ethernet-phy@0 {
+ reg = <0>;
+ interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <3000>;
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+ "CAM2_MIRROR", "", "", "SMBALERT",
+ "DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+ "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+ "SD1_DATA3", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
+ "BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
+ "", "", "", "", "", "", "", "ON_SWITCH",
+ "POWER_LED", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
+ "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
+ "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+ "YACO_RESET";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
+ "", "", "DIP1_FB", "", "", "", "", "",
+ "CPU_LIGHT_ON", "", "ETH_RESET", "", "BL_EN",
+ "BL_PWM", "ETH_INTRP", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+ "YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks 201>;
+ VDDA-supply = <&reg_3v3>;
+ VDDIO-supply = <&reg_3v3>;
+ VDDD-supply = <&reg_1v8>;
+ };
+
+ video@5c {
+ compatible = "ti,tvp5150";
+ reg = <0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tvp5150_comp0_in: endpoint {
+ remote-endpoint = <&comp0_out>;
+ };
+ };
+
+ /* Output port 2 is video output pad */
+ port@2 {
+ reg = <2>;
+ tvp5151_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ };
+ };
+ };
+
+ gpio_pca: gpio@74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9539>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ adc@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ temperature-sensor@70 {
+ compatible = "ti,tmp103";
+ reg = <0x70>;
+ };
+};
+
+&ipu1_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
+ status = "okay";
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&ssi1 {
+ #sound-dai-cells = <0>;
+ fsl,mode = "ac97-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_h1_vbus>;
+ pinctrl-names = "default";
+ phy_type = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ disable-wp;
+ cap-sd-highspeed;
+ no-mmc;
+ no-sdio;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
+ /* CAN1_SR */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
+ /* CAN1_TERM */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
+ /* CAN2_SR */
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ /* CS */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpiokeys: gpiokeygrp {
+ fsl,pins = <
+ /* nON_SWITCH */
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* ITU656_nRESET */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ /* CAM1_MIRROR */
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0
+ /* CAM2_MIRROR */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
+ /* CAM_nDETECT */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ /* ISB_IN1 */
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
+ /* ISB_nIN2 */
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
+ /* WARN_LIGHT */
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0
+ /* ON2_FB */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0
+ /* YACO_nIRQ */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
+ /* YACO_BOOT0 */
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0
+ /* YACO_nRESET */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+ /* FORCE_ON1 */
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ /* AUDIO_nRESET */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
+ /* ITU656_nPDN */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
+
+ /* HW revision detect */
+ /* REV_ID0 */
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+ /* REV_ID1 */
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+ /* REV_ID2 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+ /* REV_ID3 */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ /* REV_ID4 */
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+
+ /* New in HW revision 1 */
+ /* ON1_FB */
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0
+ /* DIP1_FB */
+ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ipu1_csi0: ipu1csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ /* DEBUG0 */
+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
+ /* DEBUG1 */
+ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
+ /* POWER_LED */
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
+ >;
+ };
+
+ pinctrl_pca9539: pca9539 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ /* YaCO AUX Uart */
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ /* YaCO Touchscreen UART */
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
new file mode 100644
index 000000000000..d37ba4ed847d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/tvp5150.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+#include "imx6dl.dtsi"
+
+/ {
+ model = "Kverneland TGO";
+ compatible = "kvg,victgo", "fsl,imx6dl";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm1 0 5000000 0>;
+ brightness-levels = <0 16 64 255>;
+ num-interpolated-steps = <16>;
+ default-brightness-level = <1>;
+ power-supply = <&reg_3v3>;
+ enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ connector {
+ compatible = "composite-video-connector";
+ label = "Composite0";
+ sdtv-standards = <SDTV_STD_PAL_B>;
+
+ port {
+ comp0_out: endpoint {
+ remote-endpoint = <&tvp5150_comp0_in>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+ autorepeat;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ enter {
+ label = "Rotary Key";
+ gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-0 {
+ label = "debug0";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "debug1";
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ };
+
+ led-2 {
+ label = "power_led";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ panel {
+ compatible = "kyo,tcg121xglp";
+ backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ clk50m_phy: phy-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_h1_vbus: regulator-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "h1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_otg_vbus: regulator-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "otg-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ rotary-encoder {
+ compatible = "rotary-encoder";
+ pinctrl-0 = <&pinctrl_rotary_ch>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
+ <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ linux,axis = <REL_WHEEL>;
+ rotary-encoder,steps-per-period = <4>;
+ rotary-encoder,relative-axis;
+ rotary-encoder,rollover;
+ wakeup-source;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "prti6q-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Line", "Line In Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "External Speaker";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "External Speaker", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ system-clock-frequency = <0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ bitclock-master;
+ frame-master;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ mux-ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN 0
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TFSDIR 0
+ IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ mux-pins3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ 0 IMX_AUDMUX_V2_PDCR_TXRXEN
+ >;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+
+ touchscreen@0 {
+ compatible = "ti,tsc2046";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ spi-max-frequency = <200000>;
+ interrupts-extended = <&gpio5 8 IRQ_TYPE_EDGE_FALLING>;
+ pendown-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-y;
+ touchscreen-max-pressure = <4095>;
+ ti,vref-delay-usecs = /bits/ 16 <100>;
+ ti,x-plate-ohms = /bits/ 16 <800>;
+ ti,y-plate-ohms = /bits/ 16 <300>;
+ wakeup-source;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clk50m_phy>;
+ clock-names = "ipg", "ahb", "ptp";
+ phy-handle = <&rmii_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Microchip KSZ8081RNA PHY */
+ rmii_phy: ethernet-phy@0 {
+ reg = <0>;
+ interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+ "CAM2_MIRROR", "", "", "SMBALERT",
+ "DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+ "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+ "SD1_DATA3", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
+ "BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
+ "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH",
+ "POWER_LED", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
+ "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
+ "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+ "YACO_RESET";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
+ "", "", "DIP1_FB", "", "VCAM_EN", "", "", "",
+ "CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN",
+ "BL_PWM", "ETH_INTRP", "ISB_LED";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
+ "ECSPI2_SS0", "ECSPI2_SCLK", "", "",
+ "", "", "", "", "", "", "", "",
+ "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+ "YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks 201>;
+ VDDA-supply = <&reg_3v3>;
+ VDDIO-supply = <&reg_3v3>;
+ VDDD-supply = <&reg_1v8>;
+ };
+
+ video-decoder@5c {
+ compatible = "ti,tvp5150";
+ reg = <0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tvp5150_comp0_in: endpoint {
+ remote-endpoint = <&comp0_out>;
+ };
+ };
+
+ /* Output port 2 is video output pad */
+ port@2 {
+ reg = <2>;
+
+ tvp5151_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ };
+ };
+ };
+
+ keypad@70 {
+ compatible = "holtek,ht16k33";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_keypad>;
+ reg = <0x70>;
+ refresh-rate-hz = <20>;
+ debounce-delay-ms = <50>;
+ interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+ keypad,num-rows = <12>;
+ keypad,num-columns = <3>;
+ linux,keymap = <
+ MATRIX_KEY(2, 0, KEY_F6)
+ MATRIX_KEY(3, 0, KEY_F8)
+ MATRIX_KEY(4, 0, KEY_F10)
+ MATRIX_KEY(5, 0, KEY_F4)
+ MATRIX_KEY(6, 0, KEY_F2)
+ MATRIX_KEY(2, 1, KEY_F5)
+ MATRIX_KEY(3, 1, KEY_F7)
+ MATRIX_KEY(4, 1, KEY_F9)
+ MATRIX_KEY(5, 1, KEY_F3)
+ MATRIX_KEY(6, 1, KEY_F1)
+ >;
+ };
+
+ /* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ adc@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ temperature-sensor@70 {
+ compatible = "ti,tmp103";
+ reg = <0x70>;
+ };
+};
+
+&ipu1_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
+ status = "okay";
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&ssi1 {
+ #sound-dai-cells = <0>;
+ fsl,mode = "ac97-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_h1_vbus>;
+ pinctrl-names = "default";
+ phy_type = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ disable-wp;
+ cap-sd-highspeed;
+ no-mmc;
+ no-sdio;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
+ /* CAN1_SR */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
+ /* CAN1_TERM */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
+ /* CAN2_SR */
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ /* CS */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
+ MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpiokeys: gpiokeygrp {
+ fsl,pins = <
+ /* ROTARY_BTN */
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0
+ /* nON_SWITCH */
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* ITU656_nRESET */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ /* CAM1_MIRROR */
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0
+ /* CAM2_MIRROR */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
+ /* CAM_nDETECT */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ /* ISB_IN1 */
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
+ /* ISB_nIN2 */
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
+ /* WARN_LIGHT */
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0
+ /* ON2_FB */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0
+ /* YACO_nIRQ */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
+ /* YACO_BOOT0 */
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0
+ /* YACO_nRESET */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+ /* FORCE_ON1 */
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ /* AUDIO_nRESET */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
+ /* ITU656_nPDN */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
+
+ /* HW revision detect */
+ /* REV_ID0 */
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+ /* REV_ID1 is shared with PWM3 */
+ /* REV_ID2 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+ /* REV_ID3 */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ /* REV_ID4 */
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+
+ /* New in HW revision 1 */
+ /* ON1_FB */
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0
+ /* DIP1_FB */
+ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ipu1_csi0: ipu1csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ >;
+ };
+
+ pinctrl_keypad: keypadgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ /* DEBUG0 */
+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
+ /* DEBUG1 */
+ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
+ /* POWER_LED */
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_rotary_ch: rotarychgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ >;
+ };
+
+ pinctrl_touchscreen: touchscreengrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0
+ >;
+ };
+
+ /* YaCO AUX Uart */
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ /* YaCO Touchscreen UART */
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts
new file mode 100644
index 000000000000..174fd913bf96
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-vicut1.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+ model = "Kverneland UT1 Board";
+ compatible = "kvg,vicut1", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts
new file mode 100644
index 000000000000..0a4e251be162
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-vicut1.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+ model = "Kverneland UT1Q Board";
+ compatible = "kvg,vicut1q", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 5277e3903291..8d209c1b3ca7 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -406,19 +406,21 @@
&hdmi {
compatible = "fsl,imx6q-hdmi";
- port@2 {
- reg = <2>;
+ ports {
+ port@2 {
+ reg = <2>;
- hdmi_mux_2: endpoint {
- remote-endpoint = <&ipu2_di0_hdmi>;
+ hdmi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_hdmi>;
+ };
};
- };
- port@3 {
- reg = <3>;
+ port@3 {
+ reg = <3>;
- hdmi_mux_3: endpoint {
- remote-endpoint = <&ipu2_di1_hdmi>;
+ hdmi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_hdmi>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index afe477f32984..5e58740d40c5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -298,6 +298,7 @@
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
+ fsl,magic-packet;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 7e4e5fd0143a..0ad8ccde0cf8 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -69,11 +69,13 @@
ethernet-phy@0 {
reg = <0>;
qca,clk-out-frequency = <125000000>;
+ qca,smarteee-tw-us-1g = <24>;
};
ethernet-phy@4 {
reg = <4>;
qca,clk-out-frequency = <125000000>;
+ qca,smarteee-tw-us-1g = <24>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
new file mode 100644
index 000000000000..eb25d21a2ace
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -0,0 +1,803 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/tvp5150.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm1 0 5000000 0>;
+ brightness-levels = <0 16 64 255>;
+ num-interpolated-steps = <16>;
+ default-brightness-level = <1>;
+ power-supply = <&reg_3v3>;
+ enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ connector {
+ compatible = "composite-video-connector";
+ label = "Composite0";
+ sdtv-standards = <SDTV_STD_PAL_B>;
+
+ port {
+ comp0_out: endpoint {
+ remote-endpoint = <&tvp5150_comp0_in>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-0 {
+ label = "LED_DI0_DEBUG_0";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "LED_DI0_DEBUG_1";
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ };
+
+ led-2 {
+ label = "POWER_LED";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ panel {
+ compatible = "kyo,tcg121xglp";
+ backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_h1_vbus: regulator-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "h1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_otg_vbus: regulator-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "otg-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_npd>;
+ regulator-name = "wifi";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <70000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "prti6q-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Line", "Line In Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "External Speaker";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "External Speaker", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ system-clock-frequency = <0>; /* Do NOT call fsl_ssi_set_dai_sysclk! */
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ bitclock-master;
+ frame-master;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ mux-ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN 0
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TFSDIR 0
+ IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ mux-pins3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ 0 IMX_AUDMUX_V2_PDCR_TXRXEN
+ >;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&rgmii_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Microchip KSZ9031RNX PHY */
+ rgmii_phy: ethernet-phy@0 {
+ reg = <0>;
+ interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+ "CAM2_MIRROR", "", "", "SMBALERT",
+ "DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3",
+ "SDIO_D2", "SDIO_D1", "SDIO_D0",
+ "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+ "SD1_DATA3", "", "",
+ "", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "",
+ "WL_IRQ", "ETH_MDC";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
+ "BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
+ "", "", "", "", "", "", "", "ON_SWITCH",
+ "POWER_LED", "", "ECSPI2_SS0", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
+ "CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+ "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+ "CAN2_SR", "CAN2_TX", "CAN2_RX",
+ "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "",
+ "", "", "", "", "BL_EN", "BL_PWM", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS",
+ "PCIE_RESET", "", "", "", "", "", "", "",
+ "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+ "I2S_BITCLK", "I2S_DOUT",
+ "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+ "YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+ gpio-line-names =
+ "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+ "ITU656_D6", "ITU656_D7", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
+ "RGMII_TD3",
+ "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
+ "RGMII_RD2", "RGMII_RD3", "", "";
+};
+
+&gpio7 {
+ gpio-line-names =
+ "EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0",
+ "EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3",
+ "EMMC_RST", "", "", "", "CAM_DETECT", "", "", "",
+ "", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks 201>;
+ VDDA-supply = <&reg_3v3>;
+ VDDIO-supply = <&reg_3v3>;
+ VDDD-supply = <&reg_1v8>;
+ };
+
+ video-decoder@5c {
+ compatible = "ti,tvp5150";
+ reg = <0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tvp5150_comp0_in: endpoint {
+ remote-endpoint = <&comp0_out>;
+ };
+ };
+
+ /* Output port 2 is video output pad */
+ port@2 {
+ reg = <2>;
+
+ tvp5151_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ adc@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ temperature-sensor@70 {
+ compatible = "ti,tmp103";
+ reg = <0x70>;
+ };
+};
+
+&ipu1_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
+ status = "okay";
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&ssi1 {
+ #sound-dai-cells = <0>;
+ fsl,mode = "ac97-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_h1_vbus>;
+ pinctrl-names = "default";
+ phy_type = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ disable-wp;
+ cap-sd-highspeed;
+ no-mmc;
+ no-sdio;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vmmc-supply = <&reg_wifi>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ no-1-8-v;
+ no-mmc;
+ no-sd;
+ status = "okay";
+
+ wifi {
+ compatible = "ti,wl1271";
+ interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = "38400000";
+ tcxo-clock-frequency = "19200000";
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
+ /* CAN1_SR */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
+ /* CAN1_TERM */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
+ /* CAN2_SR */
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ /* CS */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
+ /* Phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* ITU656_nRESET */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ /* CAM1_MIRROR */
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0
+ /* CAM2_MIRROR */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
+ /* CAM_nDETECT */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ /* nON_SWITCH */
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
+ /* ISB_IN1 */
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
+ /* ISB_nIN2 */
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
+ /* WARN_LIGHT */
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0
+ /* ON2_FB */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0
+ /* YACO_nIRQ */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
+ /* YACO_BOOT0 */
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0
+ /* YACO_nRESET */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+ /* FORCE_ON1 */
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ /* AUDIO_nRESET */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
+ /* ITU656_nPDN */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
+
+ /* HW revision detect */
+ /* REV_ID0 */
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+ /* REV_ID1 */
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+ /* REV_ID2 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+ /* REV_ID3 */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ /* REV_ID4 */
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+
+ /* New in HW revision 1 */
+ /* ON1_FB */
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0
+ /* DIP1_FB */
+ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
+
+ /* New in UT2: FIXME: ISB PWM should start off, PD */
+ /* ISB_LED_PWM */
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x130b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ipu1_csi0: ipu1csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ /* DEBUG0 */
+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
+ /* DEBUG1 */
+ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
+ /* POWER_LED */
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ /* YaCO AUX Uart */
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
+ >;
+ };
+
+ /* YaCO Touchscreen UART */
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ /* WL12xx IRQ */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
+ >;
+ };
+
+ pinctrl_wifi_npd: wifinpdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index c0a76202e16b..525ff62b47f5 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -112,17 +112,17 @@
sound1 {
compatible = "simple-audio-card";
- simple-audio-card,name = "Front";
+ simple-audio-card,name = "front";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound1_codec>;
simple-audio-card,frame-master = <&sound1_codec>;
simple-audio-card,widgets =
"Headphone", "Headphone Jack";
simple-audio-card,routing =
- "Headphone Jack", "HPLEFT",
- "Headphone Jack", "HPRIGHT",
- "LEFTIN", "HPL",
- "RIGHTIN", "HPR";
+ "Headphone Jack", "HPA1 HPLEFT",
+ "Headphone Jack", "HPA1 HPRIGHT",
+ "HPA1 LEFTIN", "HPL",
+ "HPA1 RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&hpa1>;
sound1_cpu: simple-audio-card,cpu {
@@ -137,17 +137,17 @@
sound2 {
compatible = "simple-audio-card";
- simple-audio-card,name = "Back";
+ simple-audio-card,name = "periph";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound2_codec>;
simple-audio-card,frame-master = <&sound2_codec>;
simple-audio-card,widgets =
"Headphone", "Headphone Jack";
simple-audio-card,routing =
- "Headphone Jack", "HPLEFT",
- "Headphone Jack", "HPRIGHT",
- "LEFTIN", "HPL",
- "RIGHTIN", "HPR";
+ "Headphone Jack", "HPA1 HPLEFT",
+ "Headphone Jack", "HPA1 HPRIGHT",
+ "HPA1 LEFTIN", "HPL",
+ "HPA1 RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&hpa2>;
sound2_cpu: simple-audio-card,cpu {
@@ -399,6 +399,7 @@
reg = <0x60>;
power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
Vdd-supply = <&reg_5p0v_main>;
+ sound-name-prefix = "HPA1";
};
edp-bridge@68 {
@@ -598,6 +599,8 @@
touchscreen-inverted-x;
touchscreen-swapped-x-y;
syna,sensor-type = <1>;
+ syna,delta-x-threshold = <5>;
+ syna,delta-y-threshold = <10>;
};
rmi4-f12@12 {
@@ -626,7 +629,7 @@
pinctrl-0 = <&pinctrl_ucs1002_pins>;
reg = <0x32>;
interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
- <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+ <&gpio3 21 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "a_det", "alert";
};
@@ -637,6 +640,7 @@
reg = <0x60>;
power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
Vdd-supply = <&reg_5p0v_main>;
+ sound-name-prefix = "HPA1";
};
};
@@ -885,10 +889,6 @@
};
};
-&wdog1 {
- status = "disabled";
-};
-
&iomuxc {
pinctrl_accel: accelgrp {
fsl,pins = <
@@ -988,22 +988,22 @@
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
- MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b811
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b811
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b811
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b811
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b811
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b811
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 6f59a99cbe82..82e01ce026ea 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -182,8 +182,6 @@
};
hdmi: hdmi@120000 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x00120000 0x9000>;
interrupts = <0 115 0x04>;
gpr = <&gpr>;
@@ -192,19 +190,24 @@
clock-names = "iahb", "isfr";
status = "disabled";
- port@0 {
- reg = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
- hdmi_mux_0: endpoint {
- remote-endpoint = <&ipu1_di0_hdmi>;
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
};
- };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- hdmi_mux_1: endpoint {
- remote-endpoint = <&ipu1_di1_hdmi>;
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts
new file mode 100644
index 000000000000..7bad7ca6b12e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-vicutp.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+ model = "Kverneland UT1P Board";
+ compatible = "kvg,vicutp", "fsl,imx6qp";
+};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index caa279608803..6ea5f918d059 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -340,7 +340,6 @@
MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79
- MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79
>;
};
@@ -396,7 +395,14 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
- MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+ MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
>;
};
@@ -543,11 +549,19 @@
};
&uart1 {
+ /* J4, through-holes */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
+&uart4 {
+ /* TP198, next to J4, SMD pads */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc2>;
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
index 27143ea0f0f1..e3f1e8d79528 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
@@ -94,7 +94,6 @@
MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79
- MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79
>;
};
@@ -156,7 +155,14 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
- MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+ MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
>;
};
@@ -300,6 +306,11 @@
pinctrl-0 = <&pinctrl_uart1>;
};
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+};
+
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc2>;
diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
index 7214d1c98249..90b32f5eb529 100644
--- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
+++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
@@ -104,7 +104,6 @@
MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79
MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x79
- MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x79
>;
};
@@ -170,6 +169,13 @@
>;
};
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x1b0b1
+ MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x1b0b1
+ >;
+ };
+
pinctrl_usbotg1: usbotg1grp {
fsl,pins = <
MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
@@ -302,6 +308,11 @@
pinctrl-0 = <&pinctrl_uart1>;
};
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+};
+
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
pinctrl-0 = <&pinctrl_usdhc2>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 1351d7f70a54..c6e85e4a0883 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -206,6 +206,7 @@
phy-mode = "rgmii-id";
phy-handle = <&ethphy1>;
phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ fsl,magic-packet;
status = "okay";
mdio {
@@ -227,6 +228,7 @@
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy2>;
+ fsl,magic-packet;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 64c2d1e9f7fc..c593597b2119 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -101,7 +101,7 @@
status = "okay";
gpio-sck = <&gpio5 11 0>;
gpio-mosi = <&gpio5 10 0>;
- cs-gpios = <&gpio5 7 0>;
+ cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -113,6 +113,7 @@
reg = <0>;
registers-number = <1>;
spi-max-frequency = <100000>;
+ enable-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
};
};
@@ -145,6 +146,41 @@
reg = <0x1a>;
wlf,shared-lrclk;
};
+
+ camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_camera_clock>;
+ clocks = <&clks IMX6UL_CLK_CSI>;
+ clock-names = "xclk";
+ powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
+
+ port {
+ ov5640_to_parallel: endpoint {
+ remote-endpoint = <&parallel_from_ov5640>;
+ bus-width = <8>;
+ data-shift = <2>; /* lines 9:2 are used */
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+};
+
+&csi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_csi1>;
+ status = "okay";
+
+ port {
+ parallel_from_ov5640: endpoint {
+ remote-endpoint = <&ov5640_to_parallel>;
+ bus-type = <5>; /* Parallel bus */
+ };
+ };
};
&fec1 {
@@ -169,17 +205,26 @@
#size-cells = <0>;
ethphy0: ethernet-phy@2 {
+ compatible = "ethernet-phy-id0022.1560";
reg = <2>;
micrel,led-mode = <1>;
clocks = <&clks IMX6UL_CLK_ENET_REF>;
clock-names = "rmii-ref";
+ reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100>;
+
};
ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1560";
reg = <1>;
micrel,led-mode = <1>;
clocks = <&clks IMX6UL_CLK_ENET2_REF>;
clock-names = "rmii-ref";
+ reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100>;
};
};
};
@@ -343,9 +388,14 @@
&iomuxc {
pinctrl-names = "default";
- pinctrl_csi1: csi1grp {
+ pinctrl_camera_clock: cameraclockgrp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
+ >;
+ };
+
+ pinctrl_csi1: csi1grp {
+ fsl,pins = <
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts
new file mode 100644
index 000000000000..d62015701d0a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-prti6g.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Protonic PRTI6G Board";
+ compatible = "prt,prti6g", "fsl,imx6ul";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ clock_ksz8081_in: clock-ksz8081-in {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ clock_ksz8081_out: clock-ksz8081-out {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-0 {
+ label = "debug0";
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_3v2: regulator-3v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v2";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+
+ spi@0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eth1>;
+ phy-mode = "rmii";
+ phy-handle = <&rmii_phy>;
+ clocks = <&clks IMX6UL_CLK_ENET>,
+ <&clks IMX6UL_CLK_ENET_AHB>,
+ <&clks IMX6UL_CLK_ENET_PTP>,
+ <&clock_ksz8081_out>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Microchip KSZ8081RNA PHY */
+ rmii_phy: ethernet-phy@0 {
+ reg = <0>;
+ interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ clocks = <&clock_ksz8081_in>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ /* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ adc@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ temperature-sensor@70 {
+ compatible = "ti,tmp103";
+ reg = <0x70>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3v2>;
+ no-1-8-v;
+ disable-wp;
+ cap-sd-highspeed;
+ no-mmc;
+ no-sdio;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
+ /* SR */
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
+ /* TERM */
+ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
+ /* nSMBALERT */
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
+ /* SR */
+ MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x0b0b0
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x000b1
+ MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x0b0b0
+ MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x0b0b0
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x000b1
+ MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x0b0b0
+ MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x0b0b0
+ >;
+ };
+
+ pinctrl_eth1: eth1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x100b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x1b000
+ /* PHY ENET1_RST */
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x00880
+ /* PHY ENET1_IRQ */
+ MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x00880
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* HW revision detect */
+ /* REV_ID0 */
+ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
+ /* REV_ID1 */
+ MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0
+ /* REV_ID2 */
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
+ /* REV_ID3 */
+ MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0
+ /* BOARD_ID0 */
+ MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0
+ /* BOARD_ID1 */
+ MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0
+ /* BOARD_ID2 */
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0
+ /* BOARD_ID3 */
+ MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0
+ /* Safety controller IO */
+ /* WAKE_SC */
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0
+ /* PROGRAM_SC */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0
+ MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x4001b8b0
+ MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x4001b8b0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1
+ /* SD1 CD */
+ MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x170b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
+ MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 9d3411cc597b..afeec01f6522 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -538,6 +538,7 @@
fsl,num-tx-queues = <1>;
fsl,num-rx-queues = <1>;
fsl,stop-mode = <&gpr 0x10 4>;
+ fsl,magic-packet;
status = "disabled";
};
@@ -885,6 +886,7 @@
fsl,num-tx-queues = <1>;
fsl,num-rx-queues = <1>;
fsl,stop-mode = <&gpr 0x10 3>;
+ fsl,magic-packet;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 251007a7b836..a22d41e0cf31 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -151,6 +151,7 @@
timer {
compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
interrupt-parent = <&intc>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 2d94faf31fab..b8f152e7af7f 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -52,7 +52,7 @@
usb: usb@2680000 {
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
- dwc3@2690000 {
+ usb@2690000 {
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
};
};
@@ -78,8 +78,8 @@
dma-ranges;
status = "disabled";
- usb1: dwc3@25010000 {
- compatible = "synopsys,dwc3";
+ usb1: usb@25010000 {
+ compatible = "snps,dwc3";
reg = <0x25010000 0x70000>;
interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
usb-phy = <&usb1_phy>, <&usb1_phy>;
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index c298675a29a5..fc9fdc857ae8 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -217,8 +217,8 @@
dma-ranges;
status = "disabled";
- usb0: dwc3@2690000 {
- compatible = "synopsys,dwc3";
+ usb0: usb@2690000 {
+ compatible = "snps,dwc3";
reg = <0x2690000 0x70000>;
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
usb-phy = <&usb_phy>, <&usb_phy>;
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 7649dd1e0b9e..8bae6ed0abb2 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -11,6 +11,11 @@
#size-cells = <1>;
interrupt-parent = <&gic>;
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&saradc 8>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -195,6 +200,13 @@
#size-cells = <1>;
ranges = <0x0 0xc8100000 0x100000>;
+ ao_arc_rproc: remoteproc@1c {
+ compatible= "amlogic,meson-mx-ao-arc";
+ reg = <0x1c 0x8>, <0x38 0x8>;
+ reg-names = "remap", "cpu";
+ status = "disabled";
+ };
+
ir_receiver: ir-receiver@480 {
compatible= "amlogic,meson6-ir";
reg = <0x480 0x20>;
@@ -293,6 +305,13 @@
};
};
+ thermal_sensor: thermal-sensor {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&saradc 8>;
+ io-channel-names = "sensor-channel";
+ };
+
xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 04688e8abce2..157a950a55d3 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/power/meson8-power.h>
#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/thermal/thermal.h>
#include "meson.dtsi"
/ {
@@ -28,6 +29,7 @@
resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu1: cpu@201 {
@@ -39,6 +41,7 @@
resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu2: cpu@202 {
@@ -50,6 +53,7 @@
resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu3: cpu@203 {
@@ -61,6 +65,7 @@
resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
};
};
@@ -190,6 +195,54 @@
};
};
+ thermal-zones {
+ soc {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&thermal_sensor>;
+
+ cooling-maps {
+ map0 {
+ trip = <&soc_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&soc_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ soc_passive: soc-passive {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ soc_hot: soc-hot {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ soc_critical: soc-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+ };
+ };
+
mmcbus: bus@c8000000 {
compatible = "simple-bus";
reg = <0xc8000000 0x8000>;
@@ -254,6 +307,7 @@
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
operating-points-v2 = <&gpu_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
};
};
}; /* end of / */
@@ -315,6 +369,14 @@
};
};
+&ao_arc_rproc {
+ compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+ amlogic,secbus2 = <&secbus2>;
+ sram = <&ao_arc_sram>;
+ resets = <&reset RESET_MEDIA_CPU>;
+ clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
&cbus {
reset: reset-controller@4404 {
compatible = "amlogic,meson8b-reset";
@@ -442,6 +504,12 @@
};
&ahb_sram {
+ ao_arc_sram: ao-arc-sram@0 {
+ compatible = "amlogic,meson8-ao-arc-sram";
+ reg = <0x0 0x8000>;
+ pool;
+ };
+
smp-sram@1ff80 {
compatible = "amlogic,meson8-smp-sram";
reg = <0x1ff80 0x8>;
@@ -577,6 +645,13 @@
clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
};
+&secbus {
+ secbus2: system-controller@4000 {
+ compatible = "amlogic,meson8-secbus2", "syscon";
+ reg = <0x4000 0x2000>;
+ };
+};
+
&sdio {
compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index ed06102a4014..8e48ccc6b634 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -70,11 +70,6 @@
timeout-ms = <20000>;
};
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&saradc 8>;
- };
-
leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index 33037ef62d0a..f3937d55472d 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -27,11 +27,6 @@
reg = <0x40000000 0x40000000>;
};
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&saradc 8>;
- };
-
vcck: regulator-vcck {
compatible = "pwm-regulator";
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 5963566dbcc9..c440ef94e082 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -85,11 +85,6 @@
1800000 1>;
};
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&saradc 8>;
- };
-
rtc32k_xtal: rtc32k-xtal-clk {
/* X3 in the schematics */
compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 2401cdf5f751..c02b03cbcdf4 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/power/meson8-power.h>
#include <dt-bindings/reset/amlogic,meson8b-reset.h>
#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/thermal/thermal.h>
#include "meson.dtsi"
/ {
@@ -26,6 +27,7 @@
resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu1: cpu@201 {
@@ -37,6 +39,7 @@
resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu2: cpu@202 {
@@ -48,6 +51,7 @@
resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu3: cpu@203 {
@@ -59,6 +63,7 @@
resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
};
};
@@ -167,6 +172,54 @@
};
};
+ thermal-zones {
+ soc {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&thermal_sensor>;
+
+ cooling-maps {
+ map0 {
+ trip = <&soc_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&soc_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ soc_passive: soc-passive {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ soc_hot: soc-hot {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ soc_critical: soc-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+ };
+ };
+
mmcbus: bus@c8000000 {
compatible = "simple-bus";
reg = <0xc8000000 0x8000>;
@@ -221,6 +274,7 @@
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
operating-points-v2 = <&gpu_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
};
};
}; /* end of / */
@@ -266,6 +320,14 @@
};
};
+&ao_arc_rproc {
+ compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+ amlogic,secbus2 = <&secbus2>;
+ sram = <&ao_arc_sram>;
+ resets = <&reset RESET_MEDIA_CPU>;
+ clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
&cbus {
reset: reset-controller@4404 {
compatible = "amlogic,meson8b-reset";
@@ -410,6 +472,12 @@
};
&ahb_sram {
+ ao_arc_sram: ao-arc-sram@0 {
+ compatible = "amlogic,meson8b-ao-arc-sram";
+ reg = <0x0 0x8000>;
+ pool;
+ };
+
smp-sram@1ff80 {
compatible = "amlogic,meson8b-smp-sram";
reg = <0x1ff80 0x8>;
@@ -574,6 +642,13 @@
clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
};
+&secbus {
+ secbus2: system-controller@4000 {
+ compatible = "amlogic,meson8b-secbus2", "syscon";
+ reg = <0x4000 0x2000>;
+ };
+};
+
&sdio {
compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index 8f4eb1ed4581..fa6d55f1cfb9 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -45,11 +45,6 @@
};
};
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&saradc 8>;
- };
-
vcc_3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
index 342304f5653a..55ea87870af3 100644
--- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
+++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
@@ -2,7 +2,7 @@
/*
* OLPC XO 1.75 Laptop.
*
- * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
+ * Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk>
*/
/dts-v1/;
@@ -10,6 +10,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/marvell,mmp2-audio.h>
/ {
model = "OLPC XO-1.75";
@@ -32,8 +33,7 @@
};
};
- memory {
- linux,usable-memory = <0x0 0x1f800000>;
+ memory@0 {
available = <0xcf000 0x1ef31000 0x1000 0xbf000>;
reg = <0x0 0x20000000>;
device_type = "memory";
@@ -195,7 +195,7 @@
port {
rt5631_0: endpoint {
mclk-fs = <256>;
- clocks = <&audio_clk 0>;
+ clocks = <&audio_clk MMP2_CLK_AUDIO_SYSCLK>;
remote-endpoint = <&sspa0_0>;
};
};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 445bdcd50b9e..46984d4c5224 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/clock/marvell,mmp2.h>
#include <dt-bindings/power/marvell,mmp2.h>
+#include <dt-bindings/clock/marvell,mmp2-audio.h>
/ {
#address-cells = <1>;
@@ -243,7 +244,7 @@
interrupts = <2>;
clock-names = "audio", "bitclk";
clocks = <&soc_clocks MMP2_CLK_AUDIO>,
- <&audio_clk 1>;
+ <&audio_clk MMP2_CLK_AUDIO_SSPA0>;
power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
#sound-dai-cells = <0>;
status = "disabled";
@@ -256,7 +257,7 @@
interrupts = <3>;
clock-names = "audio", "bitclk";
clocks = <&soc_clocks MMP2_CLK_AUDIO>,
- <&audio_clk 2>;
+ <&audio_clk MMP2_CLK_AUDIO_SSPA1>;
power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
#sound-dai-cells = <0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
index fe3b1cd695ee..fe6df364a9eb 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -26,11 +26,21 @@
};
memory@0 {
- linux,usable-memory = <0x0 0x7f600000>;
available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>;
reg = <0x0 0x80000000>;
device_type = "memory";
};
+
+ ec_input_spi: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ num-chipselects = <0>;
+ sck-gpios = <&gpio 55 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+ };
};
&uart3 {
@@ -96,6 +106,15 @@
&twsi4 {
status = "okay";
+
+ embedded-controller@58 {
+ compatible = "dell,wyse-ariel-ec", "ene,kb3930";
+ reg = <0x58>;
+ system-power-controller;
+
+ off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+ <&gpio 127 GPIO_ACTIVE_HIGH>;
+ };
};
&ssp1 {
@@ -110,9 +129,17 @@
};
};
-&ssp2 {
- cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+&ec_input_spi {
status = "okay";
+ cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+
+ power-button@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <60 IRQ_TYPE_EDGE_RISING>;
+ compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input";
+ spi-max-frequency = <33000000>;
+ };
};
&gpu_2d {
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index 4ae630d37d09..a4fb9203ec1f 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -293,7 +293,8 @@
camera0: camera@d420a000 {
compatible = "marvell,mmp2-ccic";
reg = <0xd420a000 0x800>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <1>;
+ interrupt-parent = <&ci_mux>;
clocks = <&soc_clocks MMP2_CLK_CCIC0>;
clock-names = "axi";
power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
@@ -305,7 +306,8 @@
camera1: camera@d420a800 {
compatible = "marvell,mmp2-ccic";
reg = <0xd420a800 0x800>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <2>;
+ interrupt-parent = <&ci_mux>;
clocks = <&soc_clocks MMP2_CLK_CCIC1>;
clock-names = "axi";
power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
@@ -567,7 +569,7 @@
soc_clocks: clocks@d4050000 {
compatible = "marvell,mmp3-clock";
- reg = <0xd4050000 0x1000>,
+ reg = <0xd4050000 0x2000>,
<0xd4282800 0x400>,
<0xd4015000 0x1000>;
reg-names = "mpmu", "apmu", "apbc";
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index f75806d0cd47..a4423ff0df39 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -169,6 +169,29 @@
};
};
+&cpu_thermal {
+ polling-delay = <10000>; /* milliseconds */
+};
+
+&cpu_alert0 {
+ temperature = <80000>; /* millicelsius */
+};
+
+&cpu0 {
+ /*
+ * Note that the 1.2GiHz mode is enabled for all SoC variants for
+ * the Motorola Android Linux v3.0.8 based kernel.
+ */
+ operating-points = <
+ /* kHz uV */
+ 300000 1025000
+ 600000 1200000
+ 800000 1313000
+ 1008000 1375000
+ 1200000 1375000
+ >;
+};
+
&dss {
status = "okay";
};
diff --git a/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi b/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi
new file mode 100644
index 000000000000..507ff2fba837
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ vcc_core: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_core";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ };
+
+ vcc_dram: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_dram";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ vcc_io: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ red {
+ gpios = <&gpio MSC313_GPIO_SR_IO16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "activity";
+ };
+ yellow {
+ gpios = <&gpio MSC313_GPIO_SR_IO17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcc_core>;
+};
diff --git a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
index f9db2ff86f2d..db4910dcb8a7 100644
--- a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
+++ b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "mstar-infinity-msc313.dtsi"
+#include "mstar-infinity-breadbee-common.dtsi"
/ {
model = "BreadBee Crust";
diff --git a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
index f0eda80a95cc..e64ca4ce1830 100644
--- a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
+++ b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "mstar-infinity3-msc313e.dtsi"
+#include "mstar-infinity-breadbee-common.dtsi"
/ {
model = "BreadBee";
diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
index 93ffeddada1e..b9fd113979f2 100644
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -86,6 +86,38 @@
linux,axis = <REL_X>;
rotary-encoder,relative-axis;
};
+
+ speaker_amp: speaker-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* gpio_129 */
+ sound-name-prefix = "Speaker Amp";
+ VCC-supply = <&vcc1v8>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Misto Speaker";
+ simple-audio-card,widgets =
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "Speaker Amp INL", "HPL",
+ "Speaker Amp INR", "HPR",
+ "Speaker", "Speaker Amp OUTL",
+ "Speaker", "Speaker Amp OUTR";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,aux-devs = <&speaker_amp>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp2>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&codec0>;
+ system-clock-frequency = <19200000>;
+ };
+ };
};
&i2c1 {
@@ -96,6 +128,13 @@
};
};
+&mcbsp2 {
+ status = "okay";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
&i2c2 {
clock-frequency = <400000>;
@@ -277,6 +316,22 @@
};
};
+&i2c3 {
+ clock-frequency = <400000>;
+
+ codec0: codec@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic32x4";
+ reg = <0x18>;
+ clocks = <&sys_clkout1>;
+ clock-names = "mclk";
+ ldoin-supply = <&vcc1v8>;
+ iov-supply = <&vcc1v8>;
+ reset-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; /* gpio_74 */
+ };
+};
+
+
#include "tps65910.dtsi"
&omap3_pmx_core {
@@ -290,6 +345,9 @@
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */
OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* dss_data4.gpio_74 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* dss_data15.gpio_85 */
+ OMAP3_CORE1_IOPAD(0x2a1a, PIN_OUTPUT | MUX_MODE0) /* sys_clkout1.sys_clkout1 */
>;
};
@@ -318,6 +376,15 @@
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
>;
};
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
+ >;
+ };
};
&omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 7b8c18e6605e..938cc691bb2f 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -488,8 +488,8 @@
};
twl_power: power {
- compatible = "ti,twl4030-power";
- ti,use_poweroff;
+ compatible = "ti,twl4030-power-idle";
+ ti,system-power-controller;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 5de2be9bbe6f..99f5585097a1 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -2,7 +2,7 @@
/*
* Common device tree for IGEP boards based on AM/DM37x
*
- * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index af8aa5f0feb7..73d8f471b9ec 100644
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -2,7 +2,7 @@
/*
* Common Device Tree Source for IGEPv2
*
- * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
* Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
*/
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 567232584f08..9dca5bfc87ab 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -2,7 +2,7 @@
/*
* Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
*
- * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) Javier Martinez Canillas <javier@dowhile0.org>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*/
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index e341535a7162..c6f863bc03ad 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -2,7 +2,7 @@
/*
* Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
*
- * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*/
diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
index 71b0ae807ecd..742e3e147063 100644
--- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
@@ -2,7 +2,7 @@
/*
* Common Device Tree Source for IGEP COM MODULE
*
- * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
* Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
*/
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index df6ba1219830..8e9c12cf51a7 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -2,7 +2,7 @@
/*
* Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
*
- * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
* Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
*/
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 32f31035daa2..5188f96f431e 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -2,7 +2,7 @@
/*
* Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
*
- * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*/
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 05fe5ed127b0..20844dbc002e 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -72,7 +72,6 @@
<1375000 1375000 1375000>;
/* only on am/dm37x with speed-binned bit set */
opp-supported-hw = <0xffffffff 2>;
- turbo-mode;
};
};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index cb309743de5d..8466161197ae 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -33,10 +33,12 @@
};
ocp {
+ /* 4430 has only gpio_86 tshut and no talert interrupt */
bandgap: bandgap@4a002260 {
reg = <0x4a002260 0x4
0x4a00232C 0x4>;
compatible = "ti,omap4430-bandgap";
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
#thermal-sensor-cells = <0>;
};
@@ -76,11 +78,11 @@
/include/ "omap443x-clocks.dtsi"
/*
- * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ * Use dpll_per for sgx at 307.2MHz like droid4 stock v3.0.8 Android kernel
*/
&sgx_module {
assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
<&dpll_per_m7x2_ck>;
- assigned-clock-rates = <0>, <153600000>;
+ assigned-clock-rates = <0>, <307200000>;
assigned-clock-parents = <&dpll_per_m7x2_ck>;
};
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
index 7c96c59b610d..c2b02895910c 100644
--- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts
+++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
@@ -25,12 +25,6 @@
device_type = "memory";
reg = <0x0 0x80000000>;
};
-
- uart3_clk: uart3-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
- };
};
&timer {
@@ -39,5 +33,4 @@
&uart3 {
status = "okay";
- clocks = <&uart3_clk>;
};
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
index e610d49395d2..7ae34a23e320 100644
--- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
+++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
@@ -18,15 +18,8 @@
chosen {
stdout-path = "serial3:115200n8";
};
-
- uart3_clk: uart3-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
- };
};
&uart3 {
status = "okay";
- clocks = <&uart3_clk>;
};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
index c92f8bdcb331..1585e33f703b 100644
--- a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
+++ b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
@@ -21,15 +21,8 @@
chosen {
stdout-path = "serial3:115200n8";
};
-
- uart3_clk: uart3-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
- };
};
&uart3 {
status = "okay";
- clocks = <&uart3_clk>;
};
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
index a2087e617cb2..ff91561ca99c 100644
--- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
+++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
@@ -14,6 +14,7 @@
model = "Roseapple Pi";
aliases {
+ mmc0 = &mmc0;
serial2 = &uart2;
};
@@ -26,13 +27,100 @@
reg = <0x0 0x80000000>; /* 2GB */
};
- uart2_clk: uart2-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
+ /* Fixed regulator used in the absence of PMIC */
+ sd_vcc: sd-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.1V";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
};
};
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+};
+
+&pinctrl {
+ i2c0_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c0_mfp";
+ function = "i2c0";
+ };
+
+ pinconf {
+ pins = "i2c0_sclk", "i2c0_sdata";
+ bias-pull-up;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinconf {
+ pins = "i2c1_sclk", "i2c1_sdata";
+ bias-pull-up;
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinconf {
+ pins = "i2c2_sclk", "i2c2_sdata";
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins: mmc0-pins {
+ pinmux {
+ groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+ "sd0_cmd_mfp", "sd0_clk_mfp";
+ function = "sd0";
+ };
+
+ drv-pinconf {
+ groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+ drive-strength = <8>;
+ };
+
+ bias0-pinconf {
+ pins = "sd0_d0", "sd0_d1", "sd0_d2",
+ "sd0_d3", "sd0_cmd";
+ bias-pull-up;
+ };
+
+ bias1-pinconf {
+ pins = "sd0_clk";
+ bias-pull-down;
+ };
+ };
+};
+
+/* uSD */
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ no-sdio;
+ no-mmc;
+ no-1-8-v;
+ cd-gpios = <&pinctrl 117 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <&sd_vcc>;
+ vqmmc-supply = <&sd_vcc>;
+};
+
&twd_timer {
status = "okay";
};
@@ -43,5 +131,4 @@
&uart2 {
status = "okay";
- clocks = <&uart2_clk>;
};
diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/owl-s500-sparky.dts
index c665ce8b88b4..9d8f7336bec0 100644
--- a/arch/arm/boot/dts/owl-s500-sparky.dts
+++ b/arch/arm/boot/dts/owl-s500-sparky.dts
@@ -25,12 +25,6 @@
device_type = "memory";
reg = <0x0 0x40000000>; /* 1 or 2 GiB */
};
-
- uart3_clk: uart3-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
- };
};
&timer {
@@ -39,5 +33,4 @@
&uart3 {
status = "okay";
- clocks = <&uart3_clk>;
};
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 1dbe4e8b38ac..cd635f222d26 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -5,8 +5,11 @@
* Copyright (c) 2016-2017 Andreas Färber
*/
+#include <dt-bindings/clock/actions,s500-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/owl-s500-powergate.h>
+#include <dt-bindings/reset/actions,s500-reset.h>
/ {
compatible = "actions,s500";
@@ -70,6 +73,12 @@
#clock-cells = <0>;
};
+ losc: losc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -124,6 +133,7 @@
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0120000 0x2000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART0>;
status = "disabled";
};
@@ -131,6 +141,7 @@
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0122000 0x2000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART1>;
status = "disabled";
};
@@ -138,6 +149,7 @@
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0124000 0x2000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART2>;
status = "disabled";
};
@@ -145,6 +157,7 @@
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0126000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART3>;
status = "disabled";
};
@@ -152,6 +165,7 @@
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0128000 0x2000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART4>;
status = "disabled";
};
@@ -159,6 +173,7 @@
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb012a000 0x2000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART5>;
status = "disabled";
};
@@ -166,9 +181,68 @@
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb012c000 0x2000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART6>;
+ status = "disabled";
+ };
+
+ cmu: clock-controller@b0160000 {
+ compatible = "actions,s500-cmu";
+ reg = <0xb0160000 0x8000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ i2c0: i2c@b0170000 {
+ compatible = "actions,s500-i2c";
+ reg = <0xb0170000 0x4000>;
+ clocks = <&cmu CLK_I2C0>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@b0174000 {
+ compatible = "actions,s500-i2c";
+ reg = <0xb0174000 0x4000>;
+ clocks = <&cmu CLK_I2C1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@b0178000 {
+ compatible = "actions,s500-i2c";
+ reg = <0xb0178000 0x4000>;
+ clocks = <&cmu CLK_I2C2>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@b017c000 {
+ compatible = "actions,s500-i2c";
+ reg = <0xb017c000 0x4000>;
+ clocks = <&cmu CLK_I2C3>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
+ sirq: interrupt-controller@b01b0200 {
+ compatible = "actions,s500-sirq";
+ reg = <0xb01b0200 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+ };
+
timer: timer@b0168000 {
compatible = "actions,s500-timer";
reg = <0xb0168000 0x8000>;
@@ -184,5 +258,71 @@
reg = <0xb01b0100 0x100>;
#power-domain-cells = <1>;
};
+
+ pinctrl: pinctrl@b01b0000 {
+ compatible = "actions,s500-pinctrl";
+ reg = <0xb01b0000 0x40>, /* GPIO */
+ <0xb01b0040 0x10>, /* Multiplexing Control */
+ <0xb01b0060 0x18>, /* PAD Control */
+ <0xb01b0080 0xc>; /* PAD Drive Capacity */
+ clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 132>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */
+ };
+
+ dma: dma-controller@b0260000 {
+ compatible = "actions,s500-dma";
+ reg = <0xb0260000 0xd00>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <12>;
+ dma-requests = <46>;
+ clocks = <&cmu CLK_DMAC>;
+ power-domains = <&sps S500_PD_DMA>;
+ };
+
+ mmc0: mmc@b0230000 {
+ compatible = "actions,s500-mmc", "actions,owl-mmc";
+ reg = <0xb0230000 0x38>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_SD0>;
+ resets = <&cmu RESET_SD0>;
+ dmas = <&dma 2>;
+ dma-names = "mmc";
+ status = "disabled";
+ };
+
+ mmc1: mmc@b0234000 {
+ compatible = "actions,s500-mmc", "actions,owl-mmc";
+ reg = <0xb0234000 0x38>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_SD1>;
+ resets = <&cmu RESET_SD1>;
+ dmas = <&dma 3>;
+ dma-names = "mmc";
+ status = "disabled";
+ };
+
+ mmc2: mmc@b0238000 {
+ compatible = "actions,s500-mmc", "actions,owl-mmc";
+ reg = <0xb0238000 0x38>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_SD2>;
+ resets = <&cmu RESET_SD2>;
+ dmas = <&dma 4>;
+ dma-names = "mmc";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 4e6c50d45cb2..dace8ffeb991 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -461,11 +461,11 @@
};
gsbi@19800000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c@19880000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
@@ -497,17 +497,17 @@
};
gsbi@19c00000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@19c40000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dragon_gsbi12_serial_pins>;
};
i2c@19c80000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
@@ -571,7 +571,7 @@
external-bus@1a100000 {
/* The EBI2 will instantiate first, then populate its children */
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dragon_ebi2_pins>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index a701d4bac320..3bce47d16ab3 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -302,11 +302,11 @@
};
gsbi@16500000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16540000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi6_uart_4pins>;
@@ -314,10 +314,10 @@
};
gsbi@16600000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
- status = "ok";
+ status = "okay";
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 209eb21cea00..0148148a8e0a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -141,10 +141,10 @@
};
gsbi@16600000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi7_uart_2pins>;
};
@@ -152,7 +152,7 @@
/* OTG */
usb@12500000 {
- status = "ok";
+ status = "okay";
dr_mode = "otg";
ulpi {
phy {
@@ -209,7 +209,7 @@
};
pci@1b500000 {
- status = "ok";
+ status = "okay";
vdda-supply = <&pm8921_s3>;
vdda_phy-supply = <&pm8921_lvs6>;
vdda_refclk-supply = <&v3p3_fixed>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 83aaf4a74398..d0a17b5a5fa3 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -215,21 +215,21 @@
};
gsbi@16500000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_UART_W_FC>;
serial@16540000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi6_uart_4pins>;
};
};
gsbi@16600000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi7_uart_2pins>;
};
@@ -279,7 +279,7 @@
};
pci@1b500000 {
- status = "ok";
+ status = "okay";
vdda-supply = <&pm8921_s3>;
vdda_phy-supply = <&pm8921_lvs6>;
vdda_refclk-supply = <&ext_3p3v>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index 8bf488fb86ad..72e47bdc5c12 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -362,11 +362,11 @@
};
gsbi@1a200000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@1a240000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi5_uart_pin_a>;
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 244f04e19c9d..83793b835d40 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -19,13 +19,13 @@
soc {
serial@f991e000 {
- status = "ok";
+ status = "okay";
};
sdhci@f9824900 {
bus-width = <8>;
non-removable;
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -39,14 +39,14 @@
pinctrl-names = "default";
pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
bus-width = <4>;
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs2_phy>;
phy-select = <&tcsr 0xb000 1>;
extcon = <&smbb>, <&usb_id>;
@@ -56,7 +56,7 @@
adp-disable;
ulpi {
phy@b {
- status = "ok";
+ status = "okay";
v3p3-supply = <&pm8941_l24>;
v1p8-supply = <&pm8941_l6>;
extcon = <&smbb>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
new file mode 100644
index 000000000000..028ac8e24797
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4018-ap120c-ac.dtsi"
+
+/ {
+ model = "ALFA Network AP120C-AC Bit";
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "ap120c-ac:green:power";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "ap120c-ac:green:wlan";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ support {
+ label = "ap120c-ac:green:support";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
new file mode 100644
index 000000000000..b7916fc26d68
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4018-ap120c-ac.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+
+ status: status {
+ label = "ap120c-ac:blue:status";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wlan2g {
+ label = "ap120c-ac:green:wlan2g";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "ap120c-ac:red:wlan5g";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
new file mode 100644
index 000000000000..1f3b1ce82108
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ALFA Network AP120C-AC";
+ compatible = "alfa-network,ap120c-ac";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&tlmm {
+ i2c0_pins: i2c0_pinmux {
+ mux_i2c {
+ function = "blsp_i2c0";
+ pins = "gpio58", "gpio59";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ mdio_pins: mdio_pinmux {
+ mux_mdio {
+ pins = "gpio53";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_mdc {
+ pins = "gpio52";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial0_pins: serial0_pinmux {
+ mux_uart {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi0_pins: spi0_pinmux {
+ mux_spi {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ mux_cs {
+ function = "gpio";
+ pins = "gpio54", "gpio4";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ usb-power {
+ line-name = "USB-power";
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ tpm@29 {
+ compatible = "atmel,at97sc3204t";
+ reg = <0x29>;
+ };
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0x000e0000 0x00010000>;
+ };
+
+ partition@f0000 {
+ label = "u-boot";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "priv_data1";
+ reg = <0x00180000 0x00010000>;
+ read-only;
+ };
+
+ partition@190000 {
+ label = "priv_data2";
+ reg = <0x00190000 0x00010000>;
+ read-only;
+ };
+ };
+ };
+
+ nand@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi1";
+ reg = <0x00000000 0x04000000>;
+ };
+
+ partition@4000000 {
+ label = "ubi2";
+ reg = <0x04000000 0x04000000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial0_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+};
+
+&wifi0 {
+ status = "okay";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ phys = <&usb3_hs_phy>;
+ phy-names = "usb2-phy";
+ };
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
new file mode 100644
index 000000000000..394412619894
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "8devices Jalapeno";
+ compatible = "8dev,jalapeno";
+};
+
+&tlmm {
+ mdio_pins: mdio_pinmux {
+ pinmux_1 {
+ pins = "gpio53";
+ function = "mdio";
+ };
+
+ pinmux_2 {
+ pins = "gpio52";
+ function = "mdc";
+ };
+
+ pinconf {
+ pins = "gpio52", "gpio53";
+ bias-pull-up;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54", "gpio59";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ status = "okay";
+
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0x000e0000 0x00010000>;
+ };
+
+ partition@f0000 {
+ label = "u-boot";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ };
+ };
+
+ spi-nand@1 {
+ status = "okay";
+
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi1";
+ reg = <0x00000000 0x04000000>;
+ };
+
+ partition@4000000 {
+ label = "ubi2";
+ reg = <0x04000000 0x04000000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+};
+
+&wifi0 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+};
+
+&wifi1 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 418f9a022336..c93b2164db44 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -30,7 +30,7 @@
soc {
rng@22000 {
- status = "ok";
+ status = "okay";
};
pinctrl@1000000 {
@@ -66,13 +66,13 @@
};
blsp_dma: dma@7884000 {
- status = "ok";
+ status = "okay";
};
spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
cs-gpios = <&tlmm 54 0>;
mx25l25635e@0 {
@@ -87,27 +87,27 @@
serial@78af000 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
cryptobam: dma@8e04000 {
- status = "ok";
+ status = "okay";
};
crypto@8e3a000 {
- status = "ok";
+ status = "okay";
};
watchdog@b017000 {
- status = "ok";
+ status = "okay";
};
wifi@a000000 {
- status = "ok";
+ status = "okay";
};
wifi@a800000 {
- status = "ok";
+ status = "okay";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index 7a96f300bc8d..b0f476ff017f 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -9,11 +9,11 @@
soc {
dma@7984000 {
- status = "ok";
+ status = "okay";
};
qpic-nand@79b0000 {
- status = "ok";
+ status = "okay";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 7c1eb1963c67..7a337dc08741 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -70,23 +70,23 @@
serial@78af000 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
dma@7884000 {
- status = "ok";
+ status = "okay";
};
spi@78b5000 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
cs-gpios = <&tlmm 12 0>;
m25p80@0 {
@@ -99,7 +99,7 @@
};
pci@40000000 {
- status = "ok";
+ status = "okay";
perst-gpio = <&tlmm 38 0x1>;
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
index 8c7ef6537ae6..f343a2244386 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -9,12 +9,12 @@
soc {
pci@40000000 {
- status = "ok";
+ status = "okay";
perst-gpio = <&tlmm 38 0x1>;
};
spi@78b6000 {
- status = "ok";
+ status = "okay";
};
pinctrl@1000000 {
@@ -43,13 +43,13 @@
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
cs-gpios = <&tlmm 12 0>;
m25p80@0 {
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
index af7a9028d492..582acb681a98 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -19,7 +19,7 @@
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 9f1a5a668772..94872518b5a2 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -49,27 +49,27 @@
serial@78af000 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
dma@7884000 {
- status = "ok";
+ status = "okay";
};
i2c@78b7000 { /* BLSP1 QUP2 */
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
dma@7984000 {
- status = "ok";
+ status = "okay";
};
qpic-nand@79b0000 {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 74d8e2c8e4b3..7bf1da916f25 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -190,7 +190,7 @@
reg = <0x1800000 0x60000>;
};
- rng@22000 {
+ prng: rng@22000 {
compatible = "qcom,prng";
reg = <0x22000 0x140>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
@@ -209,6 +209,16 @@
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
+ vqmmc: regulator@1948000 {
+ compatible = "qcom,vqmmc-ipq4019-regulator";
+ reg = <0x01948000 0x4>;
+ regulator-name = "vqmmc";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ status = "disabled";
+ };
+
sdhci: sdhci@7824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7824900 0x11c>, <0x7824000 0x800>;
@@ -300,7 +310,7 @@
status = "disabled";
};
- crypto@8e3a000 {
+ crypto: crypto@8e3a000 {
compatible = "qcom,crypto-v5.1";
reg = <0x08e3a000 0x6000>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
@@ -386,7 +396,7 @@
dma-names = "rx", "tx";
};
- watchdog@b017000 {
+ watchdog: watchdog@b017000 {
compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
reg = <0xb017000 0x40>;
clocks = <&sleep_clk>;
@@ -605,5 +615,79 @@
reg = <4>;
};
};
+
+ usb3_ss_phy: ssphy@9a000 {
+ compatible = "qcom,usb-ss-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0x9a000 0x800>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
+ reset-names = "por_rst";
+ status = "disabled";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0xa6000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+ status = "disabled";
+ };
+
+ usb3: usb3@8af8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x8af8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB3_MASTER_CLK>,
+ <&gcc GCC_USB3_SLEEP_CLK>,
+ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x8a00000 0xf8000>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ };
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0xa8000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+ status = "disabled";
+ };
+
+ usb2: usb2@60f8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x60f8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB2_MASTER_CLK>,
+ <&gcc GCC_USB2_SLEEP_CLK>,
+ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@6000000 {
+ compatible = "snps,dwc3";
+ reg = <0x6000000 0xf8000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_hs_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "host";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 554c65e7aa0e..e5b9b9cf6097 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -24,7 +24,7 @@
gsbi@16300000 {
i2c@16380000 {
- status = "ok";
+ status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index e239a0486936..65330065390a 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -16,19 +16,19 @@
soc {
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
+ status = "okay";
serial@16340000 {
- status = "ok";
+ status = "okay";
};
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
+ status = "okay";
spi4: spi@1a280000 {
- status = "ok";
+ status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
@@ -57,12 +57,12 @@
};
sata-phy@1b400000 {
- status = "ok";
+ status = "okay";
};
sata@29000000 {
ports-implemented = <0x1>;
- status = "ok";
+ status = "okay";
};
gpio_keys {
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index c51481405e7f..98995ead4413 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -20,7 +20,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -30,7 +30,7 @@
qcom,saw = <&saw0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -67,7 +67,7 @@
no-map;
};
- smem@41000000 {
+ smem: smem@41000000 {
reg = <0x41000000 0x200000>;
no-map;
};
@@ -251,7 +251,7 @@
syscon-tcsr = <&tcsr>;
- serial@12490000 {
+ gsbi2_serial: serial@12490000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12490000 0x1000>,
<0x12480000 0x1000>;
@@ -273,7 +273,6 @@
#address-cells = <1>;
#size-cells = <0>;
};
-
};
gsbi4: gsbi@16300000 {
@@ -326,7 +325,7 @@
syscon-tcsr = <&tcsr>;
- serial@1a240000 {
+ gsbi5_serial: serial@1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x1000>,
<0x1a200000 0x1000>;
@@ -386,6 +385,13 @@
};
};
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
+ };
+
sata_phy: sata-phy@1b400000 {
compatible = "qcom,ipq806x-sata-phy";
reg = <0x1b400000 0x200>;
@@ -397,7 +403,7 @@
status = "disabled";
};
- sata@29000000 {
+ sata: sata@29000000 {
compatible = "qcom,ipq806x-ahci", "generic-ahci";
reg = <0x29000000 0x180>;
@@ -720,7 +726,7 @@
regulator-always-on;
};
- sdcc1bam:dma@12402000 {
+ sdcc1bam: dma@12402000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -730,7 +736,7 @@
qcom,ee = <0>;
};
- sdcc3bam:dma@12182000 {
+ sdcc3bam: dma@12182000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -740,13 +746,13 @@
qcom,ee = <0>;
};
- amba {
+ amba: amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sdcc@12400000 {
+ sdcc1: sdcc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
@@ -766,7 +772,7 @@
dma-names = "tx", "rx";
};
- sdcc@12180000 {
+ sdcc3: sdcc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
@@ -779,7 +785,6 @@
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
- #mmc-ddr-1_8v;
sd-uhs-sdr104;
sd-uhs-ddr50;
vqmmc-supply = <&vsdcc_fixed>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 26b034bd19d2..a725b73b5a2e 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -125,12 +125,12 @@
};
&gsbi3 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
};
&gsbi3_spi {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&gsbi3_pins>;
pinctrl-names = "default";
assigned-clocks = <&gcc GSBI3_QUP_CLK>;
@@ -138,34 +138,34 @@
};
&gsbi4 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_UART_W_FC>;
};
&gsbi4_serial {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&gsbi4_pins>;
pinctrl-names = "default";
};
&gsbi5 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi5_i2c {
- status = "ok";
+ status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&gsbi5_i2c_pins>;
pinctrl-names = "default";
};
&gsbi5_serial {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&gsbi5_uart_pins>;
pinctrl-names = "default";
};
&sdcc1 {
- status = "ok";
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index f01a11b18d6a..6a321ccb0bd0 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -17,10 +17,10 @@
soc {
gsbi@19c00000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@19c40000 {
- status = "ok";
+ status = "okay";
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 82d5d8267adf..e7d2e937ea4c 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -17,10 +17,10 @@
soc {
gsbi@16400000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16440000 {
- status = "ok";
+ status = "okay";
};
};
@@ -273,12 +273,12 @@
};
gsbi@16000000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_default>;
spi@16080000 {
- status = "ok";
+ status = "okay";
eth@0 {
compatible = "micrel,ks8851";
reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index d2d48770ec0f..ea15b645b229 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -256,11 +256,11 @@
&soc {
serial@f991e000 {
- status = "ok";
+ status = "okay";
};
remoteproc@fb21b000 {
- status = "ok";
+ status = "okay";
vddmx-supply = <&pm8841_s1>;
vddcx-supply = <&pm8841_s2>;
@@ -273,7 +273,7 @@
label = "pronto";
wcnss {
- status = "ok";
+ status = "okay";
};
};
};
@@ -335,7 +335,7 @@
};
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -348,7 +348,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
@@ -360,7 +360,7 @@
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -373,7 +373,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index e769f638f205..0cda654371ae 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -239,7 +239,7 @@
&soc {
serial@f991d000 {
- status = "ok";
+ status = "okay";
};
pinctrl@fd510000 {
@@ -410,7 +410,7 @@
};
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -423,7 +423,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
max-frequency = <100000000>;
bus-width = <4>;
@@ -471,7 +471,7 @@
};
serial@f9960000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_uart10_pin_a>;
@@ -490,7 +490,7 @@
};
i2c@f9967000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c11_pins>;
clock-frequency = <355000>;
@@ -498,7 +498,7 @@
led-controller@38 {
compatible = "ti,lm3630a";
- status = "ok";
+ status = "okay";
reg = <0x38>;
#address-cells = <1>;
@@ -514,7 +514,7 @@
};
i2c@f9968000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c12_pins>;
clock-frequency = <100000>;
@@ -551,7 +551,7 @@
};
i2c@f9923000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <100000>;
@@ -585,7 +585,7 @@
};
i2c@f9924000 {
- status = "ok";
+ status = "okay";
clock-frequency = <355000>;
qcom,src-freq = <50000000>;
@@ -620,7 +620,7 @@
};
i2c@f9925000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <100000>;
@@ -638,7 +638,7 @@
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -652,7 +652,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
@@ -663,14 +663,14 @@
};
mdss@fd900000 {
- status = "ok";
+ status = "okay";
mdp@fd900000 {
- status = "ok";
+ status = "okay";
};
dsi@fd922800 {
- status = "ok";
+ status = "okay";
vdda-supply = <&pm8941_l2>;
vdd-supply = <&pm8941_lvs3>;
@@ -704,7 +704,7 @@
};
dsi-phy@fd922a00 {
- status = "ok";
+ status = "okay";
vddio-supply = <&pm8941_l12>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index 97352de91314..a0f7f461f48c 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -12,8 +12,8 @@
aliases {
serial0 = &blsp1_uart1;
- sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
- sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
};
chosen {
@@ -30,6 +30,7 @@
pma8084_s1: s1 {
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
+ regulator-always-on;
};
pma8084_s2: s2 {
@@ -115,6 +116,7 @@
pma8084_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
pma8084_l13: l13 {
@@ -298,12 +300,26 @@
enable-active-high;
};
+ vreg_panel: panel-regulator {
+ compatible = "regulator-fixed";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_en_pin>;
+
+ regulator-name = "panel-vddr-reg";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
/delete-node/ vreg-boost;
};
&soc {
serial@f991e000 {
- status = "ok";
+ status = "okay";
};
gpio-keys {
@@ -453,10 +469,20 @@
bias-pull-down;
};
};
+
+ panel_te_pin: panel {
+ te {
+ pins = "gpio12";
+ function = "mdp_vsync";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
};
sdhc_1: sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pma8084_l20>;
vqmmc-supply = <&pma8084_s4>;
@@ -469,7 +495,7 @@
};
sdhc_2: sdhci@f9864900 {
- status = "ok";
+ status = "okay";
max-frequency = <100000000>;
@@ -518,7 +544,7 @@
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -531,7 +557,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pma8084_l6>;
v3p3-supply = <&pma8084_l24>;
@@ -697,6 +723,64 @@
pinctrl-0 = <&fuelgauge_pin>;
};
};
+
+ adreno@fdb00000 {
+ status = "ok";
+ };
+
+ mdss@fd900000 {
+ status = "ok";
+
+ mdp@fd900000 {
+ status = "ok";
+ };
+
+ dsi@fd922800 {
+ status = "ok";
+
+ vdda-supply = <&pma8084_l2>;
+ vdd-supply = <&pma8084_l22>;
+ vddio-supply = <&pma8084_l12>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+
+ panel: panel@0 {
+ reg = <0>;
+ compatible = "samsung,s6e3fa2";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+ iovdd-supply = <&pma8084_lvs4>;
+ vddr-supply = <&vreg_panel>;
+
+ reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+ te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ dsi-phy@fd922a00 {
+ status = "ok";
+
+ vddio-supply = <&pma8084_l12>;
+ };
+ };
};
&spmi_bus {
@@ -726,6 +810,14 @@
power-source = <PMA8084_GPIO_S4>;
};
+ panel_en_pin: panel-en-pin {
+ pins = "gpio14";
+ function = "normal";
+ bias-pull-up;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+
wlan_sleep_clk_pin: wlan-sleep-clk-pin {
pins = "gpio16";
function = "func2";
@@ -735,6 +827,15 @@
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
+ panel_rst_pin: panel-rst-pin {
+ pins = "gpio17";
+ function = "normal";
+ bias-disable;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+
+
fuelgauge_pin: fuelgauge-int-pin {
pins = "gpio21";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
index 5669f5f58a86..398a3eaf306b 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
@@ -261,7 +261,7 @@
&soc {
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -274,7 +274,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
bus-width = <4>;
@@ -288,7 +288,7 @@
};
serial@f991e000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_pin_a>;
@@ -366,7 +366,7 @@
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -379,7 +379,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
@@ -415,7 +415,7 @@
};
coincell@2800 {
- status = "ok";
+ status = "okay";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
@@ -423,7 +423,7 @@
pm8941@1 {
wled@d800 {
- status = "ok";
+ status = "okay";
qcom,cs-out;
qcom,current-limit = <20>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
index 701b396719c7..f4ec08f13003 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
@@ -279,7 +279,7 @@
&soc {
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -292,7 +292,7 @@
};
sdhci@f9864900 {
- status = "ok";
+ status = "okay";
max-frequency = <100000000>;
non-removable;
@@ -316,7 +316,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
bus-width = <4>;
@@ -330,14 +330,14 @@
};
serial@f991e000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_pin_a>;
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -350,7 +350,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
@@ -482,7 +482,7 @@
};
i2c@f9964000 {
- status = "ok";
+ status = "okay";
clock-frequency = <355000>;
qcom,src-freq = <50000000>;
@@ -522,7 +522,7 @@
};
i2c@f9967000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c11_pins>;
clock-frequency = <355000>;
@@ -635,7 +635,7 @@
};
coincell@2800 {
- status = "ok";
+ status = "okay";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 611bae9fe66b..9743beebd84d 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -261,7 +261,7 @@
&soc {
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -274,7 +274,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
@@ -286,7 +286,7 @@
};
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -299,7 +299,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
bus-width = <4>;
@@ -313,14 +313,14 @@
};
serial@f991e000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_pin_a>;
};
i2c@f9924000 {
- status = "ok";
+ status = "okay";
clock-frequency = <355000>;
qcom,src-freq = <50000000>;
@@ -464,7 +464,7 @@
};
coincell@2800 {
- status = "ok";
+ status = "okay";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
@@ -472,7 +472,7 @@
pm8941@1 {
wled@d800 {
- status = "ok";
+ status = "okay";
qcom,cs-out;
qcom,current-limit = <20>;
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 51f5f904f9eb..c65d33591efa 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1399,6 +1399,49 @@
<&rpmcc RPM_SMD_CNOC_A_CLK>;
};
+ gpu: adreno@fdb00000 {
+ status = "disabled";
+
+ compatible = "qcom,adreno-330.1",
+ "qcom,adreno";
+ reg = <0xfdb00000 0x10000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names = "core",
+ "iface",
+ "mem_iface";
+ clocks = <&mmcc OXILI_GFX3D_CLK>,
+ <&mmcc OXILICX_AHB_CLK>,
+ <&mmcc OXILICX_AXI_CLK>;
+ sram = <&gmu_sram>;
+ power-domains = <&mmcc OXILICX_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
+ <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
+ interconnect-names = "gfx-mem",
+ "ocmem";
+
+ // iommus = <&gpu_iommu 0>;
+
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-320000000 {
+ opp-hz = /bits/ 64 <320000000>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+
+ opp-27000000 {
+ opp-hz = /bits/ 64 <27000000>;
+ };
+ };
+ };
+
mdss: mdss@fd900000 {
status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
index 6740a4cb7da8..b64c28036dd0 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
@@ -14,5 +14,10 @@
clock-controller@fc400000 {
compatible = "qcom,gcc-msm8974pro";
};
+
+ adreno@fdb00000 {
+ compatible = "qcom,adreno-330.2",
+ "qcom,adreno";
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi
new file mode 100644
index 000000000000..6571b88d018a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-pmx55.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pmic@8 {
+ compatible = "qcom,pmx55", "qcom,spmi-pmic";
+ reg = <0x8 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-on@800 {
+ compatible = "qcom,pm8916-pon";
+ reg = <0x0800>;
+
+ status = "disabled";
+ };
+
+ pmx55_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+ io-channels = <&pmx55_adc ADC5_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmx55_adc: adc@3100 {
+ compatible = "qcom,spmi-adc5";
+ reg = <0x3100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+ ref-gnd@0 {
+ reg = <ADC5_REF_GND>;
+ qcom,pre-scaling = <1 1>;
+ label = "ref_gnd";
+ };
+
+ vref-1p25@1 {
+ reg = <ADC5_1P25VREF>;
+ qcom,pre-scaling = <1 1>;
+ label = "vref_1p25";
+ };
+
+ die-temp@6 {
+ reg = <ADC5_DIE_TEMP>;
+ qcom,pre-scaling = <1 1>;
+ label = "die_temp";
+ };
+
+ chg-temp@9 {
+ reg = <ADC5_CHG_TEMP>;
+ qcom,pre-scaling = <1 1>;
+ label = "chg_temp";
+ };
+ };
+
+ pmx55_gpios: gpio@c000 {
+ compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pmic@9 {
+ compatible = "qcom,pmx55", "qcom,spmi-pmic";
+ reg = <0x9 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
new file mode 100644
index 000000000000..9649c1e11311
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "qcom-sdx55.dtsi"
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <arm64/qcom/pm8150b.dtsi>
+#include "qcom-pmx55.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SDX55 MTP";
+ compatible = "qcom,sdx55-mtp", "qcom,sdx55";
+ qcom,board-id = <0x5010008 0x0>;
+
+ aliases {
+ serial0 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mpss_debug_mem: memory@8ef00000 {
+ no-map;
+ reg = <0x8ef00000 0x800000>;
+ };
+
+ ipa_fw_mem: memory@8fced000 {
+ no-map;
+ reg = <0x8fced000 0x10000>;
+ };
+
+ mpss_adsp_mem: memory@90c00000 {
+ no-map;
+ reg = <0x90c00000 0xd400000>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ vreg_bob_3p3: pmx55-bob {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bob_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vreg_s7e_mx_0p752: pmx55-s7e {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s7e_mx_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&apps_rsc {
+ pmx55-rpmh-regulators {
+ compatible = "qcom,pmx55-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-l1-l2-supply = <&vreg_s2e_1p224>;
+ vdd-l3-l9-supply = <&vreg_s3e_0p824>;
+ vdd-l4-l12-supply = <&vreg_s4e_1p904>;
+ vdd-l5-l6-supply = <&vreg_s4e_1p904>;
+ vdd-l7-l8-supply = <&vreg_s3e_0p824>;
+ vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
+ vdd-l14-supply = <&vreg_s7e_mx_0p752>;
+ vdd-l15-supply = <&vreg_s2e_1p224>;
+ vdd-l16-supply = <&vreg_s4e_1p904>;
+
+ vreg_s2e_1p224: smps2 {
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <1400000>;
+ };
+
+ vreg_s3e_0p824: smps3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_s4e_1p904: smps4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1960000>;
+ };
+
+ vreg_l1e_bb_1p2: ldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo2 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l4e_bb_0p875: ldo4 {
+ regulator-min-microvolt = <872000>;
+ regulator-max-microvolt = <872000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l5e_bb_1p7: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo7 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo8 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo9 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l10e_3p1: ldo10 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo11 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo13 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo14 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo15 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo16 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+ vdda33-supply = <&vreg_l10e_3p1>;
+ vdda18-supply = <&vreg_l5e_bb_1p7>;
+};
+
+&usb_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+ vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+};
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
new file mode 100644
index 000000000000..e4180bbc4655
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX55 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx55.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>;
+ interrupt-parent = <&intc>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
+
+ nand_clk_dummy: nand-clk-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ hyp_mem: memory@8fc00000 {
+ no-map;
+ reg = <0x8fc00000 0x80000>;
+ };
+
+ ac_db_mem: memory@8fc80000 {
+ no-map;
+ reg = <0x8fc80000 0x40000>;
+ };
+
+ secdata_mem: memory@8fcfd000 {
+ no-map;
+ reg = <0x8fcfd000 0x1000>;
+ };
+
+ sbl_mem: memory@8fd00000 {
+ no-map;
+ reg = <0x8fd00000 0x100000>;
+ };
+
+ aop_image: memory@8fe00000 {
+ no-map;
+ reg = <0x8fe00000 0x20000>;
+ };
+
+ aop_cmd_db: memory@8fe20000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x8fe20000 0x20000>;
+ no-map;
+ };
+
+ smem_mem: memory@8fe40000 {
+ no-map;
+ reg = <0x8fe40000 0xc0000>;
+ };
+
+ tz_mem: memory@8ff00000 {
+ no-map;
+ reg = <0x8ff00000 0x100000>;
+ };
+
+ tz_apps_mem: memory@0x90000000 {
+ no-map;
+ reg = <0x90000000 0x500000>;
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sdx55";
+ reg = <0x100000 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+ };
+
+ blsp1_uart3: serial@831000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x00831000 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&gcc 30>,
+ <&gcc 9>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ usb_hsphy: phy@ff4000 {
+ compatible = "qcom,usb-snps-hs-7nm-phy";
+ reg = <0x00ff4000 0x114>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_BCR>;
+ };
+
+ usb_qmpphy: phy@ff6000 {
+ compatible = "qcom,sdx55-qmp-usb3-uni-phy";
+ reg = <0x00ff6000 0x1c0>;
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+ <&gcc GCC_USB3_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ usb_ssphy: phy@ff6200 {
+ reg = <0x00ff6200 0x170>,
+ <0x00ff6400 0x200>,
+ <0x00ff6800 0x800>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
+ qpic_bam: dma-controller@1b04000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x01b04000 0x1c000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ status = "disabled";
+ };
+
+ qpic_nand: nand@1b30000 {
+ compatible = "qcom,sdx55-nand";
+ reg = <0x01b30000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>,
+ <&nand_clk_dummy>;
+ clock-names = "core", "aon";
+
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
+ dma-names = "tx", "rx", "cmd";
+ status = "disabled";
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01f40000 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ sdhc_1: sdhci@8804000 {
+ compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x08804000 0x1000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>;
+ clock-names = "iface", "core";
+ status = "disabled";
+ };
+
+ usb: usb@a6f8800 {
+ compatible = "qcom,sdx55-dwc3", "qcom,dwc3";
+ reg = <0x0a6f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_USB30_MSTR_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_GDSC>;
+
+ resets = <&gcc GCC_USB30_BCR>;
+
+ usb_dwc3: dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0a600000 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x1a0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_hsphy>, <&usb_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ pdc: interrupt-controller@b210000 {
+ compatible = "qcom,sdx55-pdc", "qcom,pdc";
+ reg = <0x0b210000 0x30000>;
+ qcom,pdc-ranges = <0 179 52>;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ restart@c264000 {
+ compatible = "qcom,pshold";
+ reg = <0x0c264000 0x1000>;
+ };
+
+ spmi_bus: qcom,spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0c440000 0x0000d00>,
+ <0x0c600000 0x2000000>,
+ <0x0e600000 0x0100000>,
+ <0x0e700000 0x00a0000>,
+ <0x0c40a000 0x0000700>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sdx55-pinctrl";
+ reg = <0xf100000 0x300000>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
+ reg = <0x15000000 0x20000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ intc: interrupt-controller@17800000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ #interrupt-cells = <3>;
+ reg = <0x17800000 0x1000>,
+ <0x17802000 0x1000>;
+ };
+
+ watchdog@17817000 {
+ compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt";
+ reg = <0x17817000 0x1000>;
+ clocks = <&sleep_clk>;
+ };
+
+ timer@17820000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17820000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17821000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 7 0x4>,
+ <GIC_SPI 6 0x4>;
+ reg = <0x17821000 0x1000>,
+ <0x17822000 0x1000>;
+ };
+
+ frame@17823000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 8 0x4>;
+ reg = <0x17823000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17824000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 9 0x4>;
+ reg = <0x17824000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17825000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 10 0x4>;
+ reg = <0x17825000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17826000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 11 0x4>;
+ reg = <0x17826000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17827000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 12 0x4>;
+ reg = <0x17827000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17828000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 13 0x4>;
+ reg = <0x17828000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17829000 {
+ frame-number = <7>;
+ interrupts = <GIC_SPI 14 0x4>;
+ reg = <0x17829000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17840000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
+ reg-names = "drv-0", "drv-1";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <1>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 2>,
+ <WAKE_TCS 2>, <CONTROL_TCS 1>;
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sdx55-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sdx55-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <19200000>;
+ };
+};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 093567022386..47a787a12e55 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -54,25 +54,6 @@
};
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- pdma: pdma@20078000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x20078000 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-broken-no-flushp;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC2>;
- clock-names = "apb_pclk";
- };
- };
-
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -292,6 +273,21 @@
status = "disabled";
};
+ nfc: nand-controller@10500000 {
+ compatible = "rockchip,rk3036-nfc",
+ "rockchip,rk2928-nfc";
+ reg = <0x10500000 0x4000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+ clock-names = "ahb", "nfc";
+ assigned-clocks = <&cru SCLK_NANDC>;
+ assigned-clock-rates = <150000000>;
+ pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
+ &flash_rdn &flash_rdy &flash_wrn>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
cru: clock-controller@20000000 {
compatible = "rockchip,rk3036-cru";
reg = <0x20000000 0x1000>;
@@ -494,6 +490,18 @@
status = "disabled";
};
+ pdma: pdma@20078000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20078000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3036-pinctrl";
rockchip,grf = <&grf>;
@@ -643,6 +651,43 @@
};
};
+ nfc {
+ flash_ale: flash-ale {
+ rockchip,pins = <2 RK_PA0 1 &pcfg_pull_default>;
+ };
+
+ flash_bus8: flash-bus8 {
+ rockchip,pins = <1 RK_PD0 1 &pcfg_pull_default>,
+ <1 RK_PD1 1 &pcfg_pull_default>,
+ <1 RK_PD2 1 &pcfg_pull_default>,
+ <1 RK_PD3 1 &pcfg_pull_default>,
+ <1 RK_PD4 1 &pcfg_pull_default>,
+ <1 RK_PD5 1 &pcfg_pull_default>,
+ <1 RK_PD6 1 &pcfg_pull_default>,
+ <1 RK_PD7 1 &pcfg_pull_default>;
+ };
+
+ flash_cle: flash-cle {
+ rockchip,pins = <2 RK_PA1 1 &pcfg_pull_default>;
+ };
+
+ flash_csn0: flash-csn0 {
+ rockchip,pins = <2 RK_PA6 1 &pcfg_pull_default>;
+ };
+
+ flash_rdn: flash-rdn {
+ rockchip,pins = <2 RK_PA3 1 &pcfg_pull_default>;
+ };
+
+ flash_rdy: flash-rdy {
+ rockchip,pins = <2 RK_PA4 1 &pcfg_pull_default>;
+ };
+
+ flash_wrn: flash-wrn {
+ rockchip,pins = <2 RK_PA2 1 &pcfg_pull_default>;
+ };
+ };
+
emac {
emac_xfer: emac-xfer {
rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 48e6e8d44a1a..a4dd50aaf3fc 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -14,6 +14,9 @@
interrupt-parent = <&gic>;
aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdio;
+ mmc2 = &emmc;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -95,24 +98,6 @@
};
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- pdma: pdma@110f0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x110f0000 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC>;
- clock-names = "apb_pclk";
- };
- };
-
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -464,6 +449,17 @@
<75000000>;
};
+ pdma: pdma@110f0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x110f0000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ };
+
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <100>; /* milliseconds */
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index cf54d5ffff2f..713f55e143c6 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -123,6 +123,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&hdmi {
ddc-i2c-bus = <&i2c5>;
status = "okay";
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 68d5a58cfe88..ea7416c31f9b 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -154,50 +154,6 @@
};
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dmac_peri: dma-controller@ff250000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff250000 0x0 0x4000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-broken-no-flushp;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC2>;
- clock-names = "apb_pclk";
- };
-
- dmac_bus_ns: dma-controller@ff600000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff600000 0x0 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-broken-no-flushp;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC1>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- dmac_bus_s: dma-controller@ffb20000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xffb20000 0x0 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-broken-no-flushp;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC1>;
- clock-names = "apb_pclk";
- };
- };
-
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -487,15 +443,27 @@
status = "disabled";
};
+ dmac_peri: dma-controller@ff250000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff250000 0x0 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
+
thermal-zones {
- reserve_thermal: reserve_thermal {
+ reserve_thermal: reserve-thermal {
polling-delay-passive = <1000>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&tsadc 0>;
};
- cpu_thermal: cpu_thermal {
+ cpu_thermal: cpu-thermal {
polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
@@ -539,7 +507,7 @@
};
};
- gpu_thermal: gpu_thermal {
+ gpu_thermal: gpu-thermal {
polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
@@ -665,6 +633,19 @@
status = "disabled";
};
+ dmac_bus_ns: dma-controller@ff600000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff600000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
i2c0: i2c@ff650000 {
compatible = "rockchip,rk3288-i2c";
reg = <0x0 0xff650000 0x0 0x1000>;
@@ -1329,75 +1310,87 @@
};
qos_gpu_r: qos@ffaa0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffaa0000 0x0 0x20>;
};
qos_gpu_w: qos@ffaa0080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffaa0080 0x0 0x20>;
};
qos_vio1_vop: qos@ffad0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffad0000 0x0 0x20>;
};
qos_vio1_isp_w0: qos@ffad0100 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffad0100 0x0 0x20>;
};
qos_vio1_isp_w1: qos@ffad0180 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffad0180 0x0 0x20>;
};
qos_vio0_vop: qos@ffad0400 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffad0400 0x0 0x20>;
};
qos_vio0_vip: qos@ffad0480 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffad0480 0x0 0x20>;
};
qos_vio0_iep: qos@ffad0500 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffad0500 0x0 0x20>;
};
qos_vio2_rga_r: qos@ffad0800 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffad0800 0x0 0x20>;
};
qos_vio2_rga_w: qos@ffad0880 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffad0880 0x0 0x20>;
};
qos_vio1_isp_r: qos@ffad0900 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffad0900 0x0 0x20>;
};
qos_video: qos@ffae0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffae0000 0x0 0x20>;
};
qos_hevc_r: qos@ffaf0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffaf0000 0x0 0x20>;
};
qos_hevc_w: qos@ffaf0080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3288-qos", "syscon";
reg = <0x0 0xffaf0080 0x0 0x20>;
};
+ dmac_bus_s: dma-controller@ffb20000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xffb20000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC1>;
+ clock-names = "apb_pclk";
+ };
+
efuse: efuse@ffb40000 {
compatible = "rockchip,rk3288-efuse";
reg = <0x0 0xffb40000 0x0 0x20>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 859a7477909f..755c946f11de 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -32,50 +32,6 @@
spi1 = &spi1;
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dmac1_s: dma-controller@20018000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x20018000 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-broken-no-flushp;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMA1>;
- clock-names = "apb_pclk";
- };
-
- dmac1_ns: dma-controller@2001c000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x2001c000 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-broken-no-flushp;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMA1>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- dmac2: dma-controller@20078000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x20078000 0x4000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-broken-no-flushp;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMA2>;
- clock-names = "apb_pclk";
- };
- };
-
xin24m: oscillator {
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -151,42 +107,42 @@
};
qos_gpu: qos@1012d000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3066-qos", "syscon";
reg = <0x1012d000 0x20>;
};
qos_vpu: qos@1012e000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3066-qos", "syscon";
reg = <0x1012e000 0x20>;
};
qos_lcdc0: qos@1012f000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3066-qos", "syscon";
reg = <0x1012f000 0x20>;
};
qos_cif0: qos@1012f080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3066-qos", "syscon";
reg = <0x1012f080 0x20>;
};
qos_ipp: qos@1012f100 {
- compatible = "syscon";
+ compatible = "rockchip,rk3066-qos", "syscon";
reg = <0x1012f100 0x20>;
};
qos_lcdc1: qos@1012f180 {
- compatible = "syscon";
+ compatible = "rockchip,rk3066-qos", "syscon";
reg = <0x1012f180 0x20>;
};
qos_cif1: qos@1012f200 {
- compatible = "syscon";
+ compatible = "rockchip,rk3066-qos", "syscon";
reg = <0x1012f200 0x20>;
};
qos_rga: qos@1012f280 {
- compatible = "syscon";
+ compatible = "rockchip,rk3066-qos", "syscon";
reg = <0x1012f280 0x20>;
};
@@ -276,6 +232,15 @@
status = "disabled";
};
+ nfc: nand-controller@10500000 {
+ compatible = "rockchip,rk2928-nfc";
+ reg = <0x10500000 0x4000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_NANDC0>;
+ clock-names = "ahb";
+ status = "disabled";
+ };
+
pmu: pmu@20004000 {
compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
reg = <0x20004000 0x100>;
@@ -295,6 +260,31 @@
reg = <0x20008000 0x200>;
};
+ dmac1_s: dma-controller@20018000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20018000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMA1>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac1_ns: dma-controller@2001c000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x2001c000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMA1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
i2c0: i2c@2002d000 {
compatible = "rockchip,rk3066-i2c";
reg = <0x2002d000 0x1000>;
@@ -469,4 +459,16 @@
dma-names = "tx", "rx";
status = "disabled";
};
+
+ dmac2: dma-controller@20078000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20078000 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMA2>;
+ clock-names = "apb_pclk";
+ };
};
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index e491964b1c3d..7319a2473b80 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -19,6 +19,9 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
+ mmc0 = &emmc;
+ mmc1 = &sdio;
+ mmc2 = &sdmmc;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -452,6 +455,17 @@
#reset-cells = <1>;
};
+ nfc: nand-controller@30100000 {
+ compatible = "rockchip,rv1108-nfc";
+ reg = <0x30100000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+ clock-names = "ahb", "nfc";
+ assigned-clocks = <&cru SCLK_NANDC>;
+ assigned-clock-rates = <150000000>;
+ status = "disabled";
+ };
+
emmc: mmc@30110000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30110000 0x4000>;
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 0013ec3463c4..a574ea91d9d3 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -15,13 +15,13 @@
#size-cells = <0>;
enable-method = "altr,socfpga-a10-smp";
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
@@ -29,6 +29,15 @@
};
};
+ pmu: pmu@ff111000 {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <0 124 4>, <0 125 4>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ reg = <0xff111000 0x1000>,
+ <0xff113000 0x1000>;
+ };
+
intc: intc@ffffd000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 4c16736ea789..4fd09997a2b9 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -122,9 +122,11 @@
ab8500_temp {
compatible = "stericsson,abx500-temp";
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ABX500_TEMP_WARM";
io-channels = <&gpadc 0x06>,
<&gpadc 0x07>;
- io-channel-name = "aux1", "aux2";
+ io-channel-names = "aux1", "aux2";
};
ab8500_battery: ab8500_battery {
@@ -134,29 +136,77 @@
ab8500_fg {
compatible = "stericsson,ab8500-fg";
- battery = <&ab8500_battery>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <8 IRQ_TYPE_LEVEL_HIGH>,
+ <28 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "NCONV_ACCU",
+ "BATT_OVV",
+ "LOW_BAT_F",
+ "CC_INT_CALIB",
+ "CCEOC";
+ battery = <&ab8500_battery>;
io-channels = <&gpadc 0x08>;
- io-channel-name = "main_bat_v";
+ io-channel-names = "main_bat_v";
};
ab8500_btemp {
compatible = "stericsson,ab8500-btemp";
- battery = <&ab8500_battery>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "BAT_CTRL_INDB",
+ "BTEMP_LOW",
+ "BTEMP_HIGH",
+ "BTEMP_LOW_MEDIUM",
+ "BTEMP_MEDIUM_HIGH";
+ battery = <&ab8500_battery>;
io-channels = <&gpadc 0x02>,
<&gpadc 0x01>;
- io-channel-name = "btemp_ball",
+ io-channel-names = "btemp_ball",
"bat_ctrl";
};
ab8500_charger {
- compatible = "stericsson,ab8500-charger";
+ compatible = "stericsson,ab8500-charger";
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 IRQ_TYPE_LEVEL_HIGH>,
+ <107 IRQ_TYPE_LEVEL_HIGH>,
+ <106 IRQ_TYPE_LEVEL_HIGH>,
+ <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>,
+ <105 IRQ_TYPE_LEVEL_HIGH>,
+ <104 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <22 IRQ_TYPE_LEVEL_HIGH>,
+ <21 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "MAIN_CH_UNPLUG_DET",
+ "MAIN_CHARGE_PLUG_DET",
+ "MAIN_EXT_CH_NOT_OK",
+ "MAIN_CH_TH_PROT_R",
+ "MAIN_CH_TH_PROT_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_CH_TH_PROT_R",
+ "USB_CH_TH_PROT_F",
+ "USB_CHARGER_NOT_OKR",
+ "VBUS_OVV",
+ "CH_WD_EXP",
+ "VBUS_CH_DROP_END";
battery = <&ab8500_battery>;
vddadc-supply = <&ab8500_ldo_tvout_reg>;
io-channels = <&gpadc 0x03>,
<&gpadc 0x0a>,
<&gpadc 0x09>,
<&gpadc 0x0b>;
- io-channel-name = "main_charger_v",
+ io-channel-names = "main_charger_v",
"main_charger_c",
"vbus_v",
"usb_charger_c";
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index c72aa250bf6f..cc045b2fc217 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -13,7 +13,8 @@
<&gpadc 0x08>, /* Main battery voltage */
<&gpadc 0x09>, /* VBUS */
<&gpadc 0x0b>, /* Charger current */
- <&gpadc 0x0c>; /* Backup battery voltage */
+ <&gpadc 0x0c>, /* Backup battery voltage */
+ <&gpadc 0x0d>; /* Die temperature */
};
soc {
@@ -45,9 +46,8 @@
gpadc: ab8500-gpadc {
compatible = "stericsson,ab8500-gpadc";
- interrupts = <32 IRQ_TYPE_LEVEL_HIGH
- 39 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "HW_CONV_END", "SW_CONV_END";
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "SW_CONV_END";
vddadc-supply = <&ab8500_ldo_adc_reg>;
#address-cells = <1>;
#size-cells = <0>;
@@ -84,42 +84,93 @@
bk_bat_v: channel@0c {
reg = <0x0c>;
};
+ die_temp: channel@0d {
+ reg = <0x0d>;
+ };
usb_id: channel@0e {
reg = <0x0e>;
};
};
ab8500_battery: ab8500_battery {
- status = "disabled";
+ stericsson,battery-type = "LIPO";
thermistor-on-batctrl;
};
ab8500_fg {
status = "disabled";
compatible = "stericsson,ab8500-fg";
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <8 IRQ_TYPE_LEVEL_HIGH>,
+ <28 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "NCONV_ACCU",
+ "BATT_OVV",
+ "LOW_BAT_F",
+ "CC_INT_CALIB",
+ "CCEOC";
battery = <&ab8500_battery>;
io-channels = <&gpadc 0x08>;
- io-channel-name = "main_bat_v";
+ io-channel-names = "main_bat_v";
};
ab8500_btemp {
status = "disabled";
compatible = "stericsson,ab8500-btemp";
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "BAT_CTRL_INDB",
+ "BTEMP_LOW",
+ "BTEMP_HIGH",
+ "BTEMP_LOW_MEDIUM",
+ "BTEMP_MEDIUM_HIGH";
battery = <&ab8500_battery>;
io-channels = <&gpadc 0x02>,
<&gpadc 0x01>;
- io-channel-name = "btemp_ball",
+ io-channel-names = "btemp_ball",
"bat_ctrl";
};
ab8500_charger {
status = "disabled";
compatible = "stericsson,ab8500-charger";
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 IRQ_TYPE_LEVEL_HIGH>,
+ <107 IRQ_TYPE_LEVEL_HIGH>,
+ <106 IRQ_TYPE_LEVEL_HIGH>,
+ <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>,
+ <105 IRQ_TYPE_LEVEL_HIGH>,
+ <104 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <22 IRQ_TYPE_LEVEL_HIGH>,
+ <21 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "MAIN_CH_UNPLUG_DET",
+ "MAIN_CHARGE_PLUG_DET",
+ "MAIN_EXT_CH_NOT_OK",
+ "MAIN_CH_TH_PROT_R",
+ "MAIN_CH_TH_PROT_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_CH_TH_PROT_R",
+ "USB_CH_TH_PROT_F",
+ "USB_CHARGER_NOT_OKR",
+ "VBUS_OVV",
+ "CH_WD_EXP",
+ "VBUS_CH_DROP_END";
battery = <&ab8500_battery>;
vddadc-supply = <&ab8500_ldo_adc_reg>;
io-channels = <&gpadc 0x09>,
<&gpadc 0x0b>;
- io-channel-name = "vbus_v",
+ io-channel-names = "vbus_v",
"usb_charger_c";
};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 404b9c4a5fee..68607e4ad80c 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -883,7 +883,7 @@
status = "disabled";
};
- sdi0_per1@80126000 {
+ mmc@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
@@ -899,7 +899,7 @@
status = "disabled";
};
- sdi1_per2@80118000 {
+ mmc@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -915,7 +915,7 @@
status = "disabled";
};
- sdi2_per3@80005000 {
+ mmc@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
@@ -931,7 +931,7 @@
status = "disabled";
};
- sdi3_per2@80119000 {
+ mmc@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -947,7 +947,7 @@
status = "disabled";
};
- sdi4_per2@80114000 {
+ mmc@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
@@ -963,7 +963,7 @@
status = "disabled";
};
- sdi5_per3@80008000 {
+ mmc@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80008000 0x1000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index ff47cbf6ed3b..83b179692dff 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -113,23 +113,8 @@
status = "okay";
};
- /* ST6G3244ME level translator for 1.8/2.9 V */
- vmmci: regulator-gpio {
- compatible = "regulator-gpio";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2900000>;
- regulator-name = "mmci-reg";
- regulator-type = "voltage";
-
- startup-delay-us = <100>;
-
- states = <1800000 0x1
- 2900000 0x0>;
- };
-
// External Micro SD slot
- sdi0_per1@80126000 {
+ mmc@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
@@ -152,7 +137,7 @@
};
// WLAN SDIO channel
- sdi1_per2@80118000 {
+ mmc@80118000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
@@ -165,7 +150,7 @@
};
// PoP:ed eMMC
- sdi2_per3@80005000 {
+ mmc@80005000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
@@ -180,7 +165,7 @@
};
// On-board eMMC
- sdi4_per2@80114000 {
+ mmc@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts
index f8c0c1e6aa04..a036a03f6718 100644
--- a/arch/arm/boot/dts/ste-href520-tvk.dts
+++ b/arch/arm/boot/dts/ste-href520-tvk.dts
@@ -12,11 +12,43 @@
model = "ST-Ericsson HREF520 and TVK1281618 UIB";
compatible = "st-ericsson,href520", "st-ericsson,u8500";
- soc {
- vmmci: regulator-gpio {
- gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
- enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+
+ /* ST6G3244ME level translator for 1.8/2.9 V */
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmci_default_mode>;
+ };
+};
+
+&pinctrl {
+ vmmci {
+ vmmci_default_mode: vmmc_default {
+ /* VMMCI level-shifter enable */
+ default_href520_cfg1 {
+ pins = "GPIO78_F4";
+ ste,config = <&gpio_out_hi>;
+ };
+ /* VMMCI level-shifter voltage select */
+ default_href520_cfg2 {
+ pins = "GPIO5_AG6";
+ ste,config = <&gpio_out_hi>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
index 8ce6b723abf2..dfc933214c1a 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -12,6 +12,25 @@
model = "ST-Ericsson HREF (pre-v60) and ST UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+ /* ST6G3244ME level translator for 1.8/2.9 V */
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+
+ gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
index 142f5475521f..4e6e4439dcff 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -11,4 +11,23 @@
/ {
model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+ /* ST6G3244ME level translator for 1.8/2.9 V */
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+
+ gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 115495de8612..29b67abfc461 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -61,16 +61,10 @@
};
// External Micro SD slot
- sdi0_per1@80126000 {
+ mmc@80126000 {
cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
};
- vmmci: regulator-gpio {
- gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
- enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
pinctrl {
/* Set this up using hogs */
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
index 1316886e6bcb..52c56ed17ae6 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -14,6 +14,28 @@
model = "ST-Ericsson HREF (v60+) and ST UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+ /* ST6G3244ME level translator for 1.8/2.9 V */
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmci_default_mode>;
+ };
+
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
@@ -33,3 +55,20 @@
};
};
};
+
+&pinctrl {
+ vmmci {
+ vmmci_default_mode: vmmc_default {
+ /* VMMCI level-shifter enable */
+ default_hrefv60_cfg2 {
+ pins = "GPIO169_D22";
+ ste,config = <&gpio_out_hi>;
+ };
+ /* VMMCI level-shifter voltage select */
+ default_hrefv60_cfg3 {
+ pins = "GPIO5_AG6";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
index 5d4b8245f02c..9c2d2ee6d6d8 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -13,4 +13,43 @@
/ {
model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+ /* ST6G3244ME level translator for 1.8/2.9 V */
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmci_default_mode>;
+ };
+};
+
+&pinctrl {
+ vmmci {
+ vmmci_default_mode: vmmc_default {
+ /* VMMCI level-shifter enable */
+ default_hrefv60_cfg2 {
+ pins = "GPIO169_D22";
+ ste,config = <&gpio_out_hi>;
+ };
+ /* VMMCI level-shifter voltage select */
+ default_hrefv60_cfg3 {
+ pins = "GPIO5_AG6";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 05b4fbbba57f..8f504edefd3f 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -10,6 +10,64 @@
model = "ST-Ericsson HREF (v60+) platform with Device Tree";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+ thermal-zones {
+ chassis-thermal {
+ /* Poll every 20 seconds */
+ polling-delay = <20000>;
+ /* Poll every 2nd second when cooling */
+ polling-delay-passive = <2000>;
+
+ thermal-sensors = <&therm1>, <&therm2>;
+
+ /* Tripping points made from rough guess about operating conditions */
+ trips {
+ chassis_alert: chassis-alert {
+ /* At 50 degrees take down the CPU frequency */
+ temperature = <50000>;
+ hysteresis = <3000>;
+ type = "active";
+ };
+ chassis_crit: chassis-crit {
+ /* Just shut down at 70 degrees */
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ /* Push down the operating frequency of the SoC when it gets hot */
+ cooling-maps {
+ map0 {
+ trip = <&chassis_alert>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <100>;
+ };
+ };
+ };
+ };
+
+ /*
+ * Thermistors on the board, formally to monitor battery temperatures
+ * but what they measure is the board temperature.
+ */
+ therm1: thermistor@0 {
+ compatible = "murata,ncp18wb473";
+ io-channels = <&gpadc 0x06>; /* AUX1 */
+ pullup-uv = <1800000>;
+ pullup-ohm = <220000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ therm2: thermistor@1 {
+ compatible = "murata,ncp18wb473";
+ io-channels = <&gpadc 0x07>; /* AUX2 */
+ pullup-uv = <1800000>;
+ pullup-ohm = <220000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
soc {
/* Name the GPIO muxed rails on the HREF boards */
gpio@8012e000 {
@@ -132,16 +190,10 @@
};
// External Micro SD slot
- sdi0_per1@80126000 {
+ mmc@80126000 {
cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
};
- vmmci: regulator-gpio {
- gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
- enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
pinctrl {
/*
* Set this up using hogs, as time goes by and as seems fit, these
@@ -166,16 +218,6 @@
pins = "GPIO95_E8";
ste,config = <&gpio_in_pu>;
};
- /* VMMCI level-shifter enable */
- default_hrefv60_cfg2 {
- pins = "GPIO169_D22";
- ste,config = <&gpio_out_hi>;
- };
- /* VMMCI level-shifter voltage select */
- default_hrefv60_cfg3 {
- pins = "GPIO5_AG6";
- ste,config = <&gpio_out_hi>;
- };
};
};
ipgpio {
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index 41ed21a4fdc1..8142c017882c 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -195,7 +195,7 @@
pinctrl-0 = <&uart0_nhk_mode>;
status = "okay";
};
- mmcsd: sdi@101f6000 {
+ mmcsd: mmc@101f6000 {
cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>;
wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 4445446fa828..f16314ffbf4b 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -139,7 +139,7 @@
status = "okay";
};
/* Configure card detect for the uSD slot */
- mmcsd: sdi@101f6000 {
+ mmc@101f6000 {
cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 4f38aeecadb3..c9b906432341 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -825,7 +825,7 @@
interrupts = <10>;
};
- mmcsd: sdi@101f6000 {
+ mmcsd: mmc@101f6000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x101f6000 0x1000>;
clocks = <&sdiclk>, <&pclksdi>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 27d8a07718a0..b344b3748143 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -213,7 +213,7 @@
};
// External Micro SD slot
- sdi0_per1@80126000 {
+ mmc@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
@@ -241,7 +241,7 @@
};
// WLAN SDIO channel
- sdi1_per2@80118000 {
+ mmc@80118000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
@@ -253,7 +253,7 @@
};
// Unused PoP eMMC - register and put it to sleep by default */
- sdi2_per3@80005000 {
+ mmc@80005000 {
arm,primecell-periphid = <0x10480180>;
pinctrl-names = "default";
pinctrl-0 = <&mc2_a_1_sleep>;
@@ -262,7 +262,7 @@
};
// On-board eMMC
- sdi4_per2@80114000 {
+ mmc@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 60fe6189e728..0d43ee6583cf 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -5,6 +5,7 @@
#include "ste-ab8505.dtsi"
#include "ste-dbx5x0-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -72,7 +73,7 @@
soc {
/* External Micro SD card slot */
- sdi0_per1@80126000 {
+ mmc@80126000 {
status = "okay";
arm,primecell-periphid = <0x10480180>;
@@ -100,7 +101,7 @@
};
/* WLAN SDIO */
- sdi1_per2@80118000 {
+ mmc@80118000 {
status = "okay";
arm,primecell-periphid = <0x10480180>;
@@ -134,7 +135,7 @@
};
/* eMMC */
- sdi2_per3@80005000 {
+ mmc@80005000 {
status = "okay";
arm,primecell-periphid = <0x10480180>;
@@ -374,6 +375,32 @@
};
};
+ /* Richtek RT8515GQW Flash LED Driver IC */
+ flash {
+ compatible = "richtek,rt8515";
+ /* GPIO 140 */
+ enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ /* GPIO 141 */
+ ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ /*
+ * RFS is 16 kOhm and RTS is 100 kOhm giving
+ * the flash max current 343mA and torch max
+ * current 55 mA.
+ */
+ richtek,rfs-ohms = <16000>;
+ richtek,rts-ohms = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_flash_default_mode>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <343750>;
+ led-max-microamp = <55000>;
+ };
+ };
+
vibrator {
compatible = "gpio-vibrator";
/* GPIO195 (MOT_EN) */
@@ -499,6 +526,15 @@
};
};
+ flash {
+ gpio_flash_default_mode: flash_default {
+ golden_cfg1 {
+ pins = "GPIO140_B11", "GPIO141_C12";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+
i2c-gpio-1 {
i2c_gpio_1_default: i2c_gpio_1 {
golden_cfg1 {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
new file mode 100644
index 000000000000..7411bfeda285
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -0,0 +1,930 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy S Advance GT-I9070 also known as Janice.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8500.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Samsung Galaxy S Advance (GT-I9070)";
+ compatible = "samsung,janice", "st-ericsson,u8500";
+
+ chosen {
+ stdout-path = &serial2;
+ };
+
+ /* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
+ ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VMEM_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <5000>; // FIXME
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_ldo_en_default_mode>;
+ };
+
+ /*
+ * External Ricoh "TSP" regulator for the touchscreen.
+ * One GPIO line controls two voltages of 3.3V and 1.8V
+ * this line is known as "TSP_LDO_ON1" in the schematics.
+ */
+ ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "LDO_TSP_A3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* GPIO94 controls this regulator */
+ gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ /* 70 ms power-on delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_ldo_en_default_mode>;
+ };
+ ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_TSP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO94 controls this regulator */
+ gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ /* 70 ms power-on delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_ldo_en_default_mode>;
+ };
+
+ /*
+ * External Ricoh "TSP" regulator for the touchkeys.
+ * Two GPIO lines controls two voltages of 3.3V and 1.8V
+ * TSP_LDO_ON2 controls VREG_TOUCHKEY_1V8
+ * EN_LED_LDO controls VREG_KLED_3V3 (key LED)
+ */
+ ldo_kled_3v3_reg: regulator-gpio-vreg-kled-3v3 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_KLED_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* GPIO68 controls this regulator */
+ gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ /* 70 ms power-on delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_led_ldo_default_mode>;
+ };
+ ldo_touchkey_1v8_reg: regulator-gpio-vreg-touchkey-1v8 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_TOUCHKEY_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO89 controls this regulator */
+ gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ /* 70 ms power-on delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_ldo_on2_default_mode>;
+ };
+
+
+ /*
+ * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+ * LCD_PWR_EN controls a 3.0V and 1.8V output.
+ */
+ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_LCD_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ /* GPIO219 controls this regulator */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwr_en_default_mode>;
+ };
+ lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO219 controls this regulator */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwr_en_default_mode>;
+ };
+
+ /*
+ * This regulator is a GPIO line that drives the Broadcom WLAN
+ * line BT_VREG_EN high and enables the internal regulators
+ * inside the chip.
+ *
+ * The voltage specified here is only used to determine the OCR mask,
+ * the for the SDIO connector, the chip is actually connected
+ * directly to VBAT.
+ */
+ wl_bt_reg: regulator-gpio-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "BT_VREG_EN";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ startup-delay-us = <100000>;
+ /* GPIO222 (BT_VREG_EN) */
+ gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_ldo_en_default>;
+ };
+
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default_mode>;
+
+ button-home {
+ linux,code = <KEY_HOME>;
+ label = "HOME";
+ /* GPIO91 */
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+ button-volup {
+ linux,code = <KEY_VOLUMEUP>;
+ label = "VOL+";
+ /* GPIO67 */
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+ button-voldown {
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "VOL-";
+ /* GPIO92 */
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /* Richtek RT8515GQW Flash LED Driver IC */
+ flash {
+ compatible = "richtek,rt8515";
+ /* GPIO 140 */
+ enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ /* GPIO 141 */
+ ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ /*
+ * RFS is 16 kOhm and RTS is 100 kOhm giving
+ * the flash max current 343mA and torch max
+ * current 55 mA.
+ */
+ richtek,rfs-ohms = <16000>;
+ richtek,rts-ohms = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_flash_default_mode>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <343750>;
+ led-max-microamp = <55000>;
+ };
+ };
+
+ /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+ i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Yamaha YAS530 magnetometer */
+ magnetometer@2e {
+ compatible = "yamaha,yas530";
+ reg = <0x2e>;
+ /* VDD 3V */
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ /* IOVDD 1.8V */
+ iovdd-supply = <&ab8500_ldo_aux2_reg>;
+ /* GPIO204 COMPASS_RST_N */
+ reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&yas529_default>;
+ };
+ /* TODO: this should also be used by the NCP6914 Camera power management unit */
+ };
+
+ /*
+ * These pins do have an spi controller, however the controller on
+ * these pins is not the fully featured PL022 SSP/SPI block but the
+ * ST Micro diet "PL023" version. One of the lacking features in
+ * this derivative is 3wire support, so it cannot be used to drive
+ * this panel interface. We have to use GPIO bit-banging instead.
+ */
+ spi-gpio-0 {
+ compatible = "spi-gpio";
+ /* Clock on GPIO220 */
+ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+ /* MISO/MOSI on GPIO224 (no separate MISO pin) */
+ mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ /* Chip select on GPIO223 */
+ cs-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_gpio_0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6e63m0";
+ reg = <0>;
+ vdd3-supply = <&lcd_3v0_reg>;
+ vci-supply = <&lcd_1v8_reg>;
+ /* Reset on GPIO139 */
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_default_mode>;
+ spi-3wire;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+ /*
+ * Current sense amplifier on the light sensor to convert current to
+ * voltage. We do not know if this is the actual configuration. The
+ * sense resistor value was found by calibrating in a room ambient
+ * light with a second mobile phone light sensor as reference. If you
+ * pry a Janice phone apart and inspect it you may figure this out.
+ */
+ gp2a_shunt: current-sense-shunt {
+ compatible = "current-sense-shunt";
+ io-channels = <&gpadc 0x07>;
+ shunt-resistor-micro-ohms = <15000000>; /* 15 ohms c:a */
+ #io-channel-cells = <0>;
+ io-channel-ranges;
+ };
+
+ /* Bit-banged I2C on GPIO196 and GPIO197 also called "TOUCHKEY_I2C" */
+ i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio6 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio6 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_1_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey@20 {
+ compatible = "coreriver,tc360-touchkey";
+ reg = <0x20>;
+ vdd-supply = <&ldo_kled_3v3_reg>;
+ vcc-supply = <&ldo_touchkey_1v8_reg>;
+ vddio-supply = <&ldo_touchkey_1v8_reg>;
+
+ /* Interrupt on GPIO 198 */
+ interrupt-parent = <&gpio6>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchkey_default_mode>;
+ linux,keycodes = <KEY_MENU KEY_BACK>;
+ };
+ };
+
+ /* Bit-banged I2C on GPIO201 and GPIO202 also called "MOT_I2C" */
+ i2c-gpio-2 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio6 10 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio6 9 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_2_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* TODO: add the Immersion ISA1200 I2C device here */
+ };
+
+ /* Bit-banged I2C on GPIO151 and GPIO152 also called "NFC_I2C" */
+ i2c-gpio-3 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_3_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@30 {
+ compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+ reg = <0x30>;
+ /* NFC IRQ on GPIO32 */
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ /* GPIO 31 */
+ firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ /* GPIO88 */
+ enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pn547_janice_default>;
+ };
+ };
+
+ soc {
+ /* External Micro SD slot */
+ mmc@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ st,sig-dir-cmd;
+ st,sig-dir-dat0;
+ st,sig-dir-dat2;
+ st,sig-pin-fbclk;
+ full-pwr-cycle;
+ /* MMC is powered by AUX3 1.2V .. 2.91V */
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ /* 2.9 V level translator is using AUX3 at 2.9 V as well */
+ vqmmc-supply = <&ab8500_ldo_aux3_reg>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc0_a_2_default>;
+ pinctrl-1 = <&mc0_a_2_sleep>;
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ status = "okay";
+ };
+
+ /* WLAN SDIO channel */
+ mmc@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ non-removable;
+ cap-sd-highspeed;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc1_a_2_default>;
+ pinctrl-1 = <&mc1_a_2_sleep>;
+ /*
+ * GPIO-controlled voltage enablement: this drives
+ * the BT_VREG_EN line high when we use this device.
+ * Represented as regulator to fill OCR mask and to
+ * be usable in parallel with the Bluetooth chip.
+ */
+ vmmc-supply = <&wl_bt_reg>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wifi@1 {
+ /* Actually BRCM4330 */
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ /* GPIO216 WL_HOST_WAKE */
+ interrupt-parent = <&gpio6>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+ /* GPIO215 WLAN_RST_N */
+ /* FIXME: kernel does not use this assert/deassert */
+ reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_mode>;
+ };
+ };
+
+ /* eMMC */
+ mmc@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ vmmc-supply = <&ldo_3v3_reg>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
+ status = "okay";
+ };
+
+ /* GBF (Bluetooth) UART */
+ uart@80120000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ /*
+ * We actually have shutdown-gpios, BT_VREG_EN on GPIO222,
+ * but since this GPIO is shared with the WLAN chip, we need
+ * to reference the regulator instead. The regulator
+ * framework will reference count the GPIO usage and
+ * make sure we can use the same GPIO for several supplies.
+ */
+ // shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&wl_bt_reg>;
+ /* BT_WAKE on GPIO199 */
+ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ /* BT_HOST_WAKE on GPIO97 */
+ /* FIXME: convert to interrupt */
+ host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ /* BT_RST_N on GPIO209 */
+ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_mode>;
+ };
+ };
+
+ /* GPS UART */
+ uart@80121000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ /* CTS/RTS is not used, CTS is repurposed as GPIO */
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
+ /* FIXME: add a device for the GPS here */
+ };
+
+ /* Debugging console UART connected to TSU6111RSVR (FSA880) */
+ uart@80007000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
+ };
+
+ prcmu@80157000 {
+ ab8500 {
+ ab8500_usb {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ ab8500-regulators {
+ ab8500_ldo_aux1 {
+ /* Used for VDD for sensors */
+ regulator-name = "V-SENSORS-VDD";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ab8500_ldo_aux2 {
+ /* Used for VIO for sensors */
+ regulator-name = "V-SENSORS-VIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ab8500_ldo_aux3 {
+ /* Used for voltage for external MMC/SD card */
+ regulator-name = "V-MMC-SD";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2910000>;
+ };
+ };
+ };
+ };
+
+ /* I2C0 */
+ i2c@80004000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
+
+ proximity@44 {
+ /* Janice has the GP2AP002A00F with light sensor */
+ compatible = "sharp,gp2ap002a00f";
+ clock-frequency = <400000>;
+ reg = <0x44>;
+
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vio-supply = <&ab8500_ldo_aux2_reg>;
+ /* ADC channel AUX2 to read ALSOUT ambient light sensor out */
+ io-channels = <&gp2a_shunt>;
+ io-channel-names = "alsout";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gp2ap002_janice_default>;
+ /* B1 mode (arch/arm/mach-ux500/include/mach/gp2a.h) */
+ sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
+ sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+ };
+ };
+
+ /* I2C1 on GPIO16 and GPIO17 also called "MUS I2C" */
+ i2c@80122000 {
+ status = "okay";
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c1_b_2_default>;
+ pinctrl-1 = <&i2c1_b_2_sleep>;
+
+ /* Texas Instruments TSU6111 micro USB switch */
+ usb-switch@25 {
+ compatible = "ti,tsu6111";
+ reg = <0x25>;
+ /* Interrupt JACK_INT_N on GPIO95 */
+ interrupt-parent = <&gpio2>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsu6111_janice_default>;
+ };
+ };
+
+ /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */
+ i2c@80128000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
+
+ gyroscope@68 {
+ compatible = "invensense,mpu3050";
+ reg = <0x68>;
+ /* GPIO226 interrupt */
+ interrupt-parent = <&gpio7>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ /* FIXME: no idea about this */
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ vlogic-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+ vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu3050_janice_default>;
+
+ /*
+ * The MPU-3050 acts as a hub for the
+ * accelerometer.
+ */
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Bosch BMA222 accelerometer */
+ accelerometer@08 {
+ compatible = "bosch,bma222";
+ reg = <0x08>;
+ /* FIXME: no idea about this */
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+ vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+ };
+ };
+ };
+ };
+
+ /* I2C3 */
+ i2c@80110000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+
+ /* Atmel mXT224E touchscreen */
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ /* GPIO218 (TSP_INT_1V8) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ /* VDDA is "analog supply", 2.57-3.47 V */
+ vdda-supply = <&ldo_tsp_3v3_reg>;
+ /* VDD is "digital supply" 1.71-3.47V */
+ vdd-supply = <&ldo_tsp_1v8_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_default>;
+ };
+ };
+
+ mcde@a0350000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dpi_default_mode>;
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ /*
+ * This extends the MC0_A_2 default config to include
+ * the card detect GPIO217 line.
+ */
+ sdi0 {
+ mc0_a_2_default {
+ default_cfg4 {
+ pins = "GPIO217_AH12"; /* card detect */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ mcde {
+ dpi_default_mode: dpi_default {
+ default_mux1 {
+ /* Mux in all the data lines */
+ function = "lcd";
+ groups =
+ /* Data lines D0-D7 GPIO70..GPIO77 */
+ "lcd_d0_d7_a_1",
+ /* Data lines D8-D11 GPIO78..GPIO81 */
+ "lcd_d8_d11_a_1",
+ /* Data lines D12-D15 GPIO82..GPIO85 */
+ "lcd_d12_d15_a_1",
+ /* Data lines D16-D23 GPIO161..GPIO168 */
+ "lcd_d16_d23_b_1";
+ };
+ default_mux2 {
+ function = "lcda";
+ /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+ groups = "lcdaclk_b_1", "lcda_b_1";
+ };
+ /* Input, no pull-up is the default state for pins used for an alt function */
+ default_cfg1 {
+ pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+ /* GPIO for panel reset control */
+ panel {
+ panel_default_mode: panel_default {
+ janice_cfg1 {
+ /* Reset line */
+ pins = "GPIO139_C9";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the eMMC */
+ emmc-ldo {
+ emmc_ldo_en_default_mode: emmc_ldo_default {
+ /* LDO enable on GPIO6 */
+ janice_cfg1 {
+ pins = "GPIO6_AF6";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the touchscreen */
+ tsp-ldo {
+ tsp_ldo_en_default_mode: tsp_ldo_default {
+ /* LDO enable on GPIO94 */
+ janice_cfg1 {
+ pins = "GPIO94_D7";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the key LED */
+ key-led {
+ en_led_ldo_default_mode: en_led_ldo_default {
+ /* EN_LED_LDO on GPIO68 */
+ janice_cfg1 {
+ pins = "GPIO68_E1";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the touchkeys */
+ touchkey-ldo {
+ tsp_ldo_on2_default_mode: tsp_ldo_on2_default {
+ /* TSP_LDO_ON2 on GPIO89 */
+ janice_cfg1 {
+ pins = "GPIO89_E6";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ touchkey {
+ touchkey_default_mode: touchkey_default {
+ janice_cfg1 {
+ /* Interrupt */
+ pins = "GPIO198_AG25";
+ ste,config = <&gpio_in_nopull>;
+ };
+ janice_cfg2 {
+ /* Reset, actually completely unused (not routed) */
+ pins = "GPIO205_AG23";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ /* GPIO that enabled the LDO regulator for the LCD display */
+ lcd-ldo {
+ lcd_pwr_en_default_mode: lcd_pwr_en_default {
+ /* LCD_PWR_EN on GPIO219 */
+ janice_cfg1 {
+ pins = "GPIO219_AG10";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the WLAN internal LDO regulators */
+ wlan-ldo {
+ wlan_ldo_en_default: wlan_ldo_default {
+ /* GPIO222 BT_VREG_ON */
+ janice_cfg1 {
+ pins = "GPIO222_AJ9";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* Flash and torch */
+ flash {
+ gpio_flash_default_mode: flash_default {
+ janice_cfg1 {
+ pins = "GPIO140_B11", "GPIO141_C12";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* GPIO keys */
+ gpio-keys {
+ gpio_keys_default_mode: gpio_keys_default {
+ skomer_cfg1 {
+ pins = "GPIO67_G2", /* VOL UP */
+ "GPIO91_B6", /* HOME */
+ "GPIO92_D6"; /* VOL DOWN */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ /* Interrupt line for the Atmel MXT228 touchscreen */
+ tsp {
+ tsp_default: tsp_default {
+ janice_cfg1 {
+ pins = "GPIO218_AH11"; /* TSP_INT_1V8 */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* Reset line for the Yamaha YAS529 magnetometer */
+ yas529 {
+ yas529_default: yas529_janice {
+ janice_cfg1 {
+ pins = "GPIO204_AF23";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* Interrupt line for light/proximity sensor GP2AP002 */
+ gp2ap002 {
+ gp2ap002_janice_default: gp2ap002_janice {
+ janice_cfg1 {
+ pins = "GPIO146_D13";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* Interrupt line for Invensense MPU3050 gyroscope */
+ mpu3050 {
+ mpu3050_janice_default: mpu3050_janice {
+ janice_cfg1 {
+ /* GPIO226 used for IRQ */
+ pins = "GPIO226_AF8";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for magnetometer and NCP6914 */
+ i2c-gpio-0 {
+ i2c_gpio_0_default: i2c_gpio_0 {
+ janice_cfg1 {
+ pins = "GPIO143_D12", "GPIO144_B13";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for the Cypress touchkeys */
+ i2c-gpio-1 {
+ i2c_gpio_1_default: i2c_gpio_1 {
+ janice_cfg1 {
+ pins = "GPIO196_AG26", "GPIO197_AH24";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for the Immersion ISA1200 */
+ i2c-gpio-2 {
+ i2c_gpio_2_default: i2c_gpio_2 {
+ janice_cfg1 {
+ pins = "GPIO201_AF24", "GPIO202_AF25";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for the NFC */
+ i2c-gpio-3 {
+ i2c_gpio_3_default: i2c_gpio_3 {
+ janice_cfg1 {
+ pins = "GPIO151_D17", "GPIO152_D16";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based SPI bus for the display */
+ spi-gpio-0 {
+ spi_gpio_0_default: spi_gpio_0 {
+ janice_cfg1 {
+ pins = "GPIO220_AH10", "GPIO223_AH9", "GPIO224_AG9";
+ ste,config = <&gpio_out_hi>;
+ };
+ /* This pin is unused but belongs with this SPI block */
+ janice_cfg2 {
+ pins = "GPIO225_AG8";
+ ste,config = <&in_pd>;
+ };
+ };
+ };
+ wlan {
+ wlan_default_mode: wlan_default {
+ /* GPIO215 used for RESET_N */
+ janice_cfg1 {
+ pins = "GPIO215_AH13";
+ ste,config = <&gpio_out_lo>;
+ };
+ /* GPIO216 for WL_HOST_WAKE */
+ janice_cfg2 {
+ pins = "GPIO216_AG12";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ bluetooth {
+ bluetooth_default_mode: bluetooth_default {
+ janice_cfg1 {
+ pins = "GPIO199_AH23";
+ ste,config = <&gpio_out_lo>;
+ };
+ janice_cfg2 {
+ pins = "GPIO97_D9";
+ ste,config = <&gpio_in_nopull>;
+ };
+ janice_cfg3 {
+ pins = "GPIO209_AG15";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* Interrupt line for TI TSU6111 Micro USB switch */
+ tsu6111 {
+ tsu6111_janice_default: tsu6111_janice {
+ janice_cfg1 {
+ /* GPIO95 used for IRQ */
+ pins = "GPIO95_E8";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ nfc {
+ pn547_janice_default: pn547_janice {
+ /* Interrupt line */
+ janice_cfg1 {
+ pins = "GPIO32_V2";
+ ste,config = <&gpio_in_nopull>;
+ };
+ /* Enable and firmware GPIOs */
+ janice_cfg2 {
+ pins = "GPIO31_V3", "GPIO88_C4";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index b50634c81b44..d28a00757d0b 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -8,6 +8,7 @@
#include "ste-ab8505.dtsi"
#include "ste-dbx5x0-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -118,6 +119,32 @@
pinctrl-0 = <&gpio_backlight_default_mode>;
};
+ /* Richtek RT8515GQW Flash LED Driver IC */
+ flash {
+ compatible = "richtek,rt8515";
+ /* GPIO 140 */
+ enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ /* GPIO 141 */
+ ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ /*
+ * RFS is 16 kOhm and RTS is 100 kOhm giving
+ * the flash max current 343mA and torch max
+ * current 55 mA.
+ */
+ richtek,rfs-ohms = <16000>;
+ richtek,rts-ohms = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_flash_default_mode>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <343750>;
+ led-max-microamp = <55000>;
+ };
+ };
+
i2c-gpio-0 {
compatible = "i2c-gpio";
sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -147,7 +174,7 @@
soc {
// External Micro SD slot
- sdi0_per1@80126000 {
+ mmc@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
@@ -169,7 +196,7 @@
};
// WLAN SDIO channel
- sdi1_per2@80118000 {
+ mmc@80118000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <4>;
@@ -196,7 +223,7 @@
};
// eMMC
- sdi2_per3@80005000 {
+ mmc@80005000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
@@ -487,6 +514,14 @@
};
};
};
+ flash {
+ gpio_flash_default_mode: flash_default {
+ skomer_cfg1 {
+ pins = "GPIO140_B11", "GPIO141_C12";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
/* GPIO that enables the 2.9V SD card level translator */
sd-level-translator {
sd_level_translator_default: sd_level_translator_default {
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index ad715a0e1c9a..f6530d724d00 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -566,7 +566,7 @@
};
};
- sdio: sdio@40012c00 {
+ sdio: mmc@40012c00 {
compatible = "arm,pl180", "arm,primecell";
arm,primecell-periphid = <0x00880180>;
reg = <0x40012c00 0x400>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 640ff54ed00c..e1df603fc981 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -473,7 +473,7 @@
status = "disabled";
};
- sdio2: sdio2@40011c00 {
+ sdio2: mmc@40011c00 {
compatible = "arm,pl180", "arm,primecell";
arm,primecell-periphid = <0x00880180>;
reg = <0x40011c00 0x400>;
@@ -484,7 +484,7 @@
status = "disabled";
};
- sdio1: sdio1@40012c00 {
+ sdio1: mmc@40012c00 {
compatible = "arm,pl180", "arm,primecell";
arm,primecell-periphid = <0x00880180>;
reg = <0x40012c00 0x400>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index b083afd0ebd6..4ebffb0a45a3 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -354,7 +354,7 @@
dma-requests = <32>;
};
- sdmmc1: sdmmc@52007000 {
+ sdmmc1: mmc@52007000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x10153180>;
reg = <0x52007000 0x1000>;
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 20a59e8f7a33..7b4249ed1983 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1273,6 +1273,18 @@
};
};
+ sdmmc1_b4_init_pins_a: sdmmc1-b4-init-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
@@ -1299,6 +1311,17 @@
};
};
+ sdmmc1_dir_init_pins_a: sdmmc1-dir-init-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
pins {
pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
@@ -2018,6 +2041,23 @@
};
};
+ i2c6_pins_a: i2c6-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 6, AF2)>, /* I2C6_SCL */
+ <STM32_PINMUX('Z', 7, AF2)>; /* I2C6_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c6_sleep_pins_a: i2c6-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 6, ANALOG)>, /* I2C6_SCL */
+ <STM32_PINMUX('Z', 7, ANALOG)>; /* I2C6_SDA */
+ };
+ };
+
spi1_pins_a: spi1-0 {
pins1 {
pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 3c75abacb374..4b8031782555 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1047,7 +1047,7 @@
};
};
- sdmmc3: sdmmc@48004000 {
+ sdmmc3: mmc@48004000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x48004000 0x400>;
@@ -1368,7 +1368,7 @@
status = "disabled";
};
- sdmmc1: sdmmc@58005000 {
+ sdmmc1: mmc@58005000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x58005000 0x1000>;
@@ -1383,7 +1383,7 @@
status = "disabled";
};
- sdmmc2: sdmmc@58007000 {
+ sdmmc2: mmc@58007000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x58007000 0x1000>;
@@ -1482,10 +1482,13 @@
usbphyc: usbphyc@5a006000 {
#address-cells = <1>;
#size-cells = <0>;
+ #clock-cells = <0>;
compatible = "st,stm32mp1-usbphyc";
reg = <0x5a006000 0x1000>;
clocks = <&rcc USBPHY_K>;
resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>;
status = "disabled";
usbphyc_port0: usb-phy@0 {
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index 58275bcf9e26..113c48b2ef93 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -331,12 +331,8 @@
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
&usbphyc_port1 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 81a7d5849db4..95b08876b2b3 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -393,12 +393,8 @@
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
&usbphyc_port1 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index cda8e871f999..1e9bf7eea0f1 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -36,34 +36,35 @@
stdout-path = &uart4;
};
- led-act {
+ led-controller-0 {
compatible = "gpio-leds";
- led-green {
+ led-0 {
label = "mc1:green:act";
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
- led-rgb {
+ led-controller-1 {
compatible = "pwm-leds";
- led-red {
+ /* led-1 to led-3 are part of a single RGB led */
+ led-1 {
label = "mc1:red:rgb";
pwms = <&leds_pwm 1 1000000 0>;
max-brightness = <255>;
active-low;
};
- led-green {
+ led-2 {
label = "mc1:green:rgb";
pwms = <&leds_pwm 2 1000000 0>;
max-brightness = <255>;
active-low;
};
- led-blue {
+ led-3 {
label = "mc1:blue:rgb";
pwms = <&leds_pwm 3 1000000 0>;
max-brightness = <255>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index 5088dd3a301b..fad23d6f69b8 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -158,6 +158,4 @@
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 8456f172d4b1..5523f4138fd6 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -300,12 +300,8 @@
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
&usbphyc_port1 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
index 32700cca24c8..cd3a1798ca68 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
@@ -36,6 +36,10 @@
status = "disabled";
};
+&fmc {
+ status = "disabled";
+};
+
&gpioa {
/*
* NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable
@@ -94,6 +98,10 @@
/delete-property/dma-names;
};
+&ksz8851 {
+ status = "disabled";
+};
+
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_a>;
@@ -132,12 +140,8 @@
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
&usbphyc_port1 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index daff5318f301..2617815e42a6 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -386,20 +386,38 @@
};
&sdmmc1 {
- pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-names = "default", "opendrain", "sleep", "init";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+ pinctrl-3 = <&sdmmc1_b4_init_pins_a &sdmmc1_dir_init_pins_a>;
cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
disable-wp;
st,sig-dir;
st,neg-edge;
st,use-ckin;
+ st,cmd-gpios = <&gpiod 2 0>;
+ st,ck-gpios = <&gpioc 12 0>;
+ st,ckin-gpios = <&gpioe 4 0>;
bus-width = <4>;
vmmc-supply = <&vdd_sd>;
status = "okay";
};
+&sdmmc1_b4_pins_a {
+ /*
+ * SD bus pull-up resistors:
+ * - optional on SoMs with SD voltage translator
+ * - mandatory on SoMs without SD voltage translator
+ */
+ pins1 {
+ bias-pull-up;
+ };
+ pins2 {
+ bias-pull-up;
+ };
+};
+
&sdmmc2 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index ec02cee1dd9b..b09e87fe901a 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -391,12 +391,8 @@
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
&usbphyc_port1 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 89c0e1ddc387..59f18846cf5d 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -694,14 +694,10 @@
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
&usbphyc_port1 {
phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
};
&vrefbuf {
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index af8ab736fd3c..20f9ed244851 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -74,12 +74,12 @@
leds {
compatible = "gpio-leds";
- red {
+ led-0 {
label = "a1000:red:usr";
gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
};
- blue {
+ led-1 {
label = "a1000:blue:pwr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 6ca02e824acc..0645d6064235 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -75,12 +75,12 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_cubieboard>;
- blue {
+ led-0 {
label = "cubieboard:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
};
- green {
+ led-1 {
label = "cubieboard:green:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
index 8ee3ff42bd55..63e77c05bfda 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -62,6 +62,7 @@
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ power-supply = <&reg_vcc3v3>;
};
chosen {
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
index ca878384e902..60e432a0ef1c 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -62,6 +62,7 @@
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ power-supply = <&reg_vcc3v3>;
};
chosen {
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
index 8a7b4c53d278..1aeb0bd5519e 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -63,7 +63,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "q5:green:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
};
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index a843e57530ed..81fdb217d339 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -62,22 +62,22 @@
leds {
compatible = "gpio-leds";
- red1 {
+ led-0 {
label = "marsboard:red1:usr";
gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
};
- red2 {
+ led-1 {
label = "marsboard:red2:usr";
gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
};
- red3 {
+ led-2 {
label = "marsboard:red3:usr";
gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
};
- red4 {
+ led-3 {
label = "marsboard:red4:usr";
gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 845f76824d57..ad0e25af45be 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -74,7 +74,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxinolime>;
- green {
+ led {
label = "a10-olinuxino-lime:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 83287b6c975e..1ac82376baef 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -63,12 +63,12 @@
leds {
compatible = "gpio-leds";
- tx {
+ led-0 {
label = "pcduino:green:tx";
gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
};
- rx {
+ led-1 {
label = "pcduino:green:rx";
gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
index 24a3d23e1952..c32596947647 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -62,6 +62,7 @@
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ power-supply = <&reg_vcc3v3>;
};
chosen {
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
index 64d50fcfcd3a..04b0e6d28769 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
@@ -62,7 +62,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_t003>;
- red {
+ led {
label = "t003-tv-dongle:red:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index 8af0eae2ddc1..667bc2dc1ea9 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -62,7 +62,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_t004>;
- red {
+ led {
label = "t004-tv-dongle:red:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
index 6e90ccb267aa..d0219404c231 100644
--- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
@@ -60,7 +60,7 @@
leds {
compatible = "gpio-leds";
- red {
+ led {
label = "mk802:red:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index d6bb82c295f0..5832bb31fc51 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -79,7 +79,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxino>;
- green {
+ led {
label = "a10s-olinuxino-micro:green:usr";
gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
index b2a49a216ebf..964360f0610a 100644
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -63,7 +63,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_r7>;
- green {
+ led {
label = "r7-tv-dongle:green:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
index 1f74ba1634cc..ef8baa992687 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -62,7 +62,7 @@
leds {
compatible = "gpio-leds";
- blue {
+ led {
label = "a10s-wobo-i5:blue:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
index a23bf24792ec..d059388d7252 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -61,6 +61,7 @@
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
+ power-supply = <&reg_vcc3v3>;
/* TODO: backlight uses axp gpio1 as enable pin */
};
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
index ba8d75b3c716..2ce361f8fede 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
@@ -66,18 +66,18 @@
leds {
compatible = "gpio-leds";
- red {
+ led-0 {
label ="licheepi:red:usr";
gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
};
- green {
+ led-1 {
label ="licheepi:green:usr";
gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- blue {
+ led-2 {
label ="licheepi:blue:usr";
gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index 5df398d77238..bfe1075e62cc 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -64,7 +64,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxinom>;
- power {
+ led {
label = "a13-olinuxino-micro:green:power";
gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 39101228a755..fadeae3cd8bb 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -66,7 +66,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxino>;
- power {
+ led {
gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
index e9ef97c9c893..d60407772e5d 100644
--- a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
+++ b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
@@ -28,6 +28,7 @@
enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
+ power-supply = <&reg_vcc3v3>;
};
chosen {
@@ -37,7 +38,7 @@
leds {
compatible = "gpio-leds";
- power {
+ led {
gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
default-state = "on";
};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index ae04955fd9a3..7075e10911d5 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -48,7 +48,7 @@
/ {
thermal-zones {
- cpu_thermal {
+ cpu-thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
index 4c20d731a9c6..f4fe258ef06d 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -71,7 +71,7 @@
compatible = "pwm-backlight";
pwms = <&pwm 0 10000 0>;
enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
-
+ power-supply = <&reg_vcc3v3>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
};
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index 1a9926d71410..6847f66699ac 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -55,6 +55,7 @@
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
+ power-supply = <&reg_vcc3v0>;
};
chosen {
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index c2b4fbf552a3..250d6b87ab4d 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -726,6 +726,18 @@
#size-cells = <0>;
};
+ mali: gpu@1c40000 {
+ compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+ reg = <0x01c40000 0x10000>;
+ interrupts = <69>, <70>, <71>, <72>, <73>;
+ interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu";
+ clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_GPU>;
+ assigned-clocks = <&ccu CLK_GPU>;
+ assigned-clock-rates = <320000000>;
+ };
+
timer@1c60000 {
compatible = "allwinner,sun5i-a13-hstimer";
reg = <0x01c60000 0x1000>;
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 73de34ae37fd..486cec6f71e0 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -226,7 +226,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en;
};
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index 6cc8ccf53d88..744723d956f0 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -72,7 +72,7 @@
leds {
compatible = "gpio-leds";
- blue {
+ led {
label = "i7:blue:usr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index a645c8f4257c..e4f3415e6108 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -61,7 +61,7 @@
leds {
compatible = "gpio-leds";
- blue {
+ led {
label = "m9:blue:pwr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -115,7 +115,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
index 648f24746234..7bd4bdd66a76 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -61,7 +61,7 @@
leds {
compatible = "gpio-leds";
- blue {
+ led {
label = "a1000g:blue:pwr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -115,7 +115,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index f3425a66fc0a..a75033e85fcb 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -165,7 +165,7 @@
};
thermal-zones {
- cpu_thermal {
+ cpu-thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -1305,7 +1305,7 @@
clock-output-names = "osc32k";
};
- nmi_intc: interrupt-controller@1f00c00 {
+ r_intc: interrupt-controller@1f00c00 {
compatible = "allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index bc3170a0b8b5..66bc6ca77afb 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -115,7 +115,6 @@
reg = <0x1c>;
interrupt-parent = <&pio>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
- #io-channel-cells = <1>;
};
};
@@ -159,7 +158,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en;
};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
index 3099491de8c4..7455c0db4a8a 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
@@ -78,7 +78,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index 708caee52425..efb25b949f30 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -59,17 +59,17 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "bpi-m2:blue:usr";
gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
};
- green {
+ led-1 {
label = "bpi-m2:green:usr";
gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
};
- red {
+ led-2 {
label = "bpi-m2:red:usr";
gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
};
@@ -148,7 +148,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
x-powers,drive-vbus-en;
@@ -261,3 +261,74 @@
&usbphy {
status = "okay";
};
+
+&pio {
+ gpio-line-names =
+ /* PA */
+ "ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "",
+ "", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1",
+ "ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK",
+ "ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC",
+ "EMDIO", "", "", "", "",
+
+ /* PB */
+ "CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37",
+ "CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "",
+
+ /* PC */
+ "", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK",
+ "WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3",
+ "", "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "USB-DRV", "", "", "", "",
+
+ /* PD */
+ "CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17",
+ "CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27",
+ "CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37",
+ "CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34",
+ "CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22",
+ "CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "",
+
+ /* PE */
+ "CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08",
+ "CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19",
+ "CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29",
+ "CN6-P31", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "",
+
+ /* PF */
+ "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+ "SDC0-D2", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "",
+
+ /* PG */
+ "CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07",
+ "LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15",
+ "LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23",
+ "CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "",
+ "", "", "", "", "", "", "", "", "",
+
+ /* PH */
+ "", "", "", "", "", "", "", "", "", "CN7-P07",
+ "CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16",
+ "CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03",
+ "CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32",
+ "CN6-P26", "CN6-P18", "", "", "", "";
+};
+
+&r_pio {
+ gpio-line-names =
+ /* PL */
+ "PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX",
+ "WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE",
+ "WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "", "",
+
+ /* PM */
+ "CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
index 2504e7189c54..cadc45255d7b 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -98,7 +98,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
index 7de2abd541c1..6bf3fbdd738f 100644
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -79,7 +79,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
drivevbus-supply = <&reg_vcc5v0>;
x-powers,drive-vbus-en;
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 8945dbb114a2..caa935ca4f19 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -74,12 +74,12 @@
leds {
compatible = "gpio-leds";
- green {
+ led-0 {
label = "bananapi-m1-plus:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
- pwr {
+ led-1 {
label = "bananapi-m1-plus:pwr:usr";
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 0b3d9ae75650..9d792d7a0f92 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -77,7 +77,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "bananapi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 5740f9442705..e22f0e8bb17a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -63,12 +63,12 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "bananapro:blue:usr";
gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-1 {
label = "bananapro:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index b8203e4ef21c..e35e6990c4b2 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -75,12 +75,12 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "cubieboard2:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-1 {
label = "cubieboard2:green:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 9109ca0919ad..52160e368304 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -75,22 +75,22 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "cubietruck:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
- orange {
+ led-1 {
label = "cubietruck:orange:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
- white {
+ led-2 {
label = "cubietruck:white:usr";
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-3 {
label = "cubietruck:green:usr";
gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index 358ed5f1b1c1..b21ddd0ec1c2 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -62,12 +62,12 @@
leds {
compatible = "gpio-leds";
- red {
+ led-0 {
label = "i12_tvbox:red:usr";
gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
};
- blue {
+ led-1 {
label = "i12_tvbox:blue:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
index 946c27278321..8ff83016ff5a 100644
--- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
@@ -53,13 +53,13 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_itead_core>;
- green {
+ led-0 {
label = "itead_core:green:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- blue {
+ led-1 {
label = "itead_core:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index 17fa8901fc00..97518afe4658 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -75,7 +75,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "lamobo_r1:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
index 6bff9e731fc3..f161d5238860 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -64,7 +64,7 @@
leds {
compatible = "gpio-leds";
- blue {
+ led {
label = "m3:blue:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
index 6f9c54b8e49a..f05ee32bc9cb 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -75,7 +75,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "a20-olimex-som-evb:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index 230d62a6b8f1..54af6c18075b 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -46,19 +46,19 @@
leds {
compatible = "gpio-leds";
- stat {
+ led-0 {
label = "a20-som204-evb:green:stat";
gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- led1 {
+ led-1 {
label = "a20-som204-evb:green:led1";
gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- led2 {
+ led-2 {
label = "a20-som204-evb:yellow:led2";
gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 2adbac860119..92938d022295 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -78,7 +78,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxinolime>;
- green {
+ led {
label = "a20-olinuxino-lime:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 9ba62774e89a..8077f1716fbc 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -75,7 +75,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxinolime>;
- green {
+ led {
label = "a20-olinuxino-lime2:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 359bd0d5b3b1..a1b89b2a2999 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -82,7 +82,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxino>;
- green {
+ led {
label = "a20-olinuxino-micro:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index 2e328d2cefc1..84efa01e7cba 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -75,12 +75,12 @@
leds {
compatible = "gpio-leds";
- green {
+ led-0 {
label = "orangepi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
};
- blue {
+ led-1 {
label = "orangepi:blue:usr";
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index d75b2e2bab28..5d77f1d9818f 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -64,7 +64,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "orangepi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index bf38c66c1815..e40ecb48d726 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -72,14 +72,12 @@
leds {
compatible = "gpio-leds";
- /* Marked "LED3" on the PCB. */
- usr1 {
+ led-3 {
label = "pcduino3-nano:green:usr1";
gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
};
- /* Marked "LED4" on the PCB. */
- usr2 {
+ led-4 {
label = "pcduino3-nano:green:usr2";
gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index cc8271d777b8..4f8d55d3ba79 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -64,12 +64,12 @@
leds {
compatible = "gpio-leds";
- tx {
+ led-0 {
label = "pcduino3:green:tx";
gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
};
- rx {
+ led-1 {
label = "pcduino3:green:rx";
gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index 6a66b0432dfa..fef02fcbbdf8 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -64,6 +64,7 @@
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ power-supply = <&reg_vcc3v3>;
};
chosen {
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 6d6a37940db2..5a40e0280665 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -140,7 +140,7 @@
};
thermal-zones {
- cpu_thermal {
+ cpu-thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index c1362d0f0ff8..a42fac676b31 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -716,7 +716,7 @@
#clock-cells = <1>;
};
- nmi_intc: interrupt-controller@1f00c00 {
+ r_intc: interrupt-controller@1f00c00 {
compatible = "allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
index 317763069c0a..065cb620aa99 100644
--- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
+++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
@@ -63,7 +63,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pin_d978>;
- home {
+ led {
label = "d978:blue:home";
gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
};
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
index a1953b2872d0..8538514c8588 100644
--- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
@@ -62,7 +62,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "a33-olinuxino:green:usr";
gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
};
@@ -98,7 +98,7 @@
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
x-powers,drive-vbus-en;
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index 785798e3a104..d54a067fc76e 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -63,6 +63,7 @@
panel {
compatible = "netron-dy,e231732";
+ power-supply = <&reg_vcc3v3>;
port {
panel_input: endpoint {
@@ -164,7 +165,7 @@
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index c458f5fb124f..7344c37107c6 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -288,7 +288,7 @@
};
thermal-zones {
- cpu_thermal {
+ cpu-thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 431f70234d36..b60016a4429c 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -74,12 +74,12 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "bananapi-m3:blue:usr";
gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-1 {
label = "bananapi-m3:green:usr";
gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index d8326a5c681d..e26af7cf10e0 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -74,22 +74,22 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "cubietruck-plus:blue:usr";
gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
};
- orange {
+ led-1 {
label = "cubietruck-plus:orange:usr";
gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
};
- white {
+ led-2 {
label = "cubietruck-plus:white:usr";
gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
};
- green {
+ led-3 {
label = "cubietruck-plus:green:usr";
gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index bfc9bb277a49..83b01b03e08e 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -65,7 +65,7 @@
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
-
+ power-supply = <&reg_sw>;
brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
default-brightness-level = <9>;
};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index c010b27fdb6a..bd898b250e74 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1061,9 +1061,6 @@
clock-names = "bus", "mod", "ram";
resets = <&ccu RST_BUS_CSI>;
status = "disabled";
-
- csi_in: port {
- };
};
hdmi: hdmi@1ee0000 {
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index e76d56a3df9c..f3f7a2c912ab 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -62,6 +62,35 @@
states = <1100000 0>, <1300000 1>;
};
+ reg_vcc_dram: vcc-dram {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-dram";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ vin-supply = <&reg_vcc5v0>;
+ };
+
+ reg_vcc1v2: vcc1v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ vin-supply = <&reg_vcc5v0>;
+ };
+
+ poweroff {
+ compatible = "regulator-poweroff";
+ cpu-supply = <&reg_vcc1v2>;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
@@ -125,6 +154,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
+ max-speed = <1500000>;
clocks = <&rtc 1>;
clock-names = "lpo";
vbat-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 45a24441ff18..62b5280ec093 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -75,13 +75,13 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "beelink-x2:blue:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
default-state = "on";
};
- red {
+ led-1 {
label = "beelink-x2:red:standby";
gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 6b149271ef13..8e7dfcffe1fb 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -25,13 +25,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "nanopi:red:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
default-state = "on";
};
- status {
+ led-1 {
label = "nanopi:green:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
index 07867a0d569b..be49eabbff94 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -61,13 +61,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
default-state = "on";
};
- status {
+ led-1 {
label = "nanopi:blue:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
index 204a39f93f4e..26e2e6172e0d 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
@@ -39,8 +39,8 @@
regulator-ramp-delay = <50>;
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1100000 0x0>,
+ <1300000 0x1>;
};
wifi_pwrseq: wifi_pwrseq {
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index 4df29a65316d..c7c3e7d8b3c8 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -60,13 +60,13 @@
leds {
compatible = "gpio-leds";
- status {
+ led-0 {
label = "nanopi:blue:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- pwr {
+ led-1 {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
index 251bbab7d707..561ea1d2f861 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -73,13 +73,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:red:status";
gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
index e1c75f7fa3ca..293016d081cd 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -64,17 +64,17 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "bpi-m2m:blue:usr";
gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
};
- green {
+ led-1 {
label = "bpi-m2m:green:usr";
gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
};
- red {
+ led-2 {
label = "bpi-m2m:red:power";
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
default-state = "on";
@@ -163,7 +163,7 @@
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
x-powers,drive-vbus-en;
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts
index 4f48eec6b2ef..2be1b76fe2f6 100644
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts
@@ -64,14 +64,14 @@
leds {
compatible = "gpio-leds";
- led1 {
+ led-1 {
label = "parrot:led1:usr";
- gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+ gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
};
- led2 {
+ led-2 {
label = "parrot:led2:usr";
- gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+ gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
};
};
@@ -164,7 +164,7 @@
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
drivevbus-supply = <&reg_vcc5v0>;
x-powers,drive-vbus-en;
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 7907569e7b5c..d5ad3b9efd12 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -190,6 +190,25 @@
};
};
+ deinterlace: deinterlace@1400000 {
+ compatible = "allwinner,sun8i-r40-deinterlace",
+ "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01400000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ /*
+ * NOTE: Contrary to what datasheet claims,
+ * DRAM deinterlace gate doesn't exist and
+ * it's shared with CSI1.
+ */
+ <&ccu CLK_DRAM_CSI1>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
syscon: system-control@1c00000 {
compatible = "allwinner,sun8i-r40-system-control",
"allwinner,sun4i-a10-system-control";
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index b3d8b8f056cd..797d61cff11e 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -54,6 +54,7 @@
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ power-supply = <&reg_dc1sw>;
};
chosen {
@@ -92,7 +93,7 @@
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
- interrupt-parent = <&nmi_intc>;
+ interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
drivevbus-supply = <&reg_vcc5v0>;
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
index 24d507cdbcf9..052b010a5607 100644
--- a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
+++ b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
@@ -39,6 +39,6 @@
};
&usbphy {
- usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
index 4aa0ee897a0a..20966e954eda 100644
--- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
@@ -64,9 +64,6 @@
status = "okay";
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
csi1_ep: endpoint {
remote-endpoint = <&ov5640_ep>;
bus-width = <8>;
@@ -88,13 +85,9 @@
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp203",
- "x-powers,axp209";
reg = <0x34>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts b/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts
new file mode 100644
index 000000000000..117aeece4e55
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include "sun8i-v3-sl631.dtsi"
+
+/ {
+ model = "SL631 Action Camera with IMX179";
+ compatible = "allwinner,sl631-imx179", "allwinner,sl631",
+ "allwinner,sun8i-v3";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi
new file mode 100644
index 000000000000..e0d2a31efc7f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+/dts-v1/;
+
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "SL631 Action Camera";
+ compatible = "allwinner,sl631", "allwinner,sun8i-v3";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pb_pins>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <&reg_ldo2>;
+ status = "okay";
+
+ button-174 {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ channel = <0>;
+ voltage = <174603>;
+ };
+
+ button-384 {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ channel = <0>;
+ voltage = <384126>;
+ };
+
+ button-593 {
+ label = "OK";
+ linux,code = <KEY_OK>;
+ channel = <0>;
+ voltage = <593650>;
+ };
+};
+
+&mmc0 {
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ vmmc-supply = <&reg_dcdc3>;
+ status = "okay";
+};
+
+&pio {
+ vcc-pd-supply = <&reg_dcdc3>;
+ vcc-pe-supply = <&reg_dcdc3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-sys-cpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vdd-3v3";
+};
+
+&reg_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pg_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index f8f19d8fa795..eb4cb63fef13 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -157,12 +157,21 @@
syscon: system-control@1c00000 {
compatible = "allwinner,sun8i-v3s-system-control",
"allwinner,sun8i-h3-system-control";
- reg = <0x01c00000 0x1000>;
+ reg = <0x01c00000 0xd0>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
};
+ nmi_intc: interrupt-controller@1c000d0 {
+ compatible = "allwinner,sun8i-v3s-nmi",
+ "allwinner,sun9i-a80-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01c000d0 0x0c>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-v3s-tcon";
reg = <0x01c0c000 0x1000>;
@@ -329,6 +338,12 @@
#interrupt-cells = <3>;
/omit-if-no-ref/
+ csi0_mclk_pin: csi0-mclk-pin {
+ pins = "PE20";
+ function = "csi_mipi";
+ };
+
+ /omit-if-no-ref/
csi1_8bit_pins: csi1-8bit-pins {
pins = "PE0", "PE2", "PE3", "PE8", "PE9",
"PE10", "PE11", "PE12", "PE13", "PE14",
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 484b93df20cb..1fe251ea94bc 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -63,12 +63,12 @@
leds {
compatible = "gpio-leds";
- green {
+ led-0 {
label = "cubieboard4:green:usr";
gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
};
- red {
+ led-1 {
label = "cubieboard4:red:usr";
gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index 8e5cb3b3fd68..7a6af54dd342 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -219,6 +219,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
+ max-speed = <1500000>;
clocks = <&rtc 1>;
clock-names = "lpo";
vbat-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index 74da1360d297..0368b3b816ef 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -4352,8 +4352,8 @@
nvidia,pins = "cam_mclk_pcc0";
nvidia,function = "vi_alt3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
pcc1 {
nvidia,pins = "pcc1";
diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts
new file mode 100644
index 000000000000..b0b836aedd76
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-ebaz4205.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Ebang EBAZ4205";
+ compatible = "ebang,ebaz4205", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+ fclk-enable = <8>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "mii";
+ phy-handle = <&phy>;
+
+ /* PHY clock */
+ assigned-clocks = <&clkc 18>;
+ assigned-clock-rates = <25000000>;
+
+ phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&pinctrl0 {
+ pinctrl_gpio0_default: gpio0-default {
+ mux {
+ groups = "gpio0_20_grp", "gpio0_32_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_20_grp", "gpio0_32_grp";
+ io-standard = <3>;
+ slew-rate = <0>;
+ };
+
+ conf-pull-up {
+ pins = "MIO20", "MIO32";
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_2_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_2_grp";
+ io-standard = <3>;
+ slew-rate = <0>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "gpio0_34_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "gpio0_34_grp";
+ io-standard = <3>;
+ slew-rate = <0>;
+ bias-high-impedance;
+ bias-pull-up;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_4_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_4_grp";
+ io-standard = <3>;
+ slew-rate = <0>;
+ };
+
+ conf-rx {
+ pins = "MIO25";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO24";
+ bias-disable;
+ };
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 88fdf6fc7569..17b56f3fa2df 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -13,6 +13,11 @@ config ARCH_AGILEX
help
This enables support for Intel's Agilex SoCFPGA Family.
+config ARCH_N5X
+ bool "Intel's eASIC N5X SoCFPGA Family"
+ help
+ This enables support for Intel's eASIC N5X SoCFPGA Family.
+
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
select ARCH_HAS_RESET_CONTROLLER
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 211d1e9d4701..41ce680e5f8d 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index e5e840b9fbb4..f7fe9fa50cb3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -36,18 +36,18 @@
leds {
compatible = "gpio-leds";
- pwr-led {
+ led-0 {
label = "bananapi-m64:red:pwr";
gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
default-state = "on";
};
- green {
+ led-1 {
label = "bananapi-m64:green:user";
gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */
};
- blue {
+ led-2 {
label = "bananapi-m64:blue:user";
gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index e58db8a6cab6..09b3c7fb82c0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -35,7 +35,7 @@
leds {
compatible = "gpio-leds";
- blue {
+ led {
label = "nanopi-a64:blue:status";
gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
index 302e24be0a31..437ffe3628a5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -1,10 +1,21 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (c) 2018 ARM Ltd.
+#include <dt-bindings/leds/common.h>
#include "sun50i-a64-sopine-baseboard.dts"
/ {
model = "Pine64 LTS";
compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
"allwinner,sun50i-a64";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 896f34fd9fc3..7ae16541d14f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -126,8 +126,6 @@
};
&ehci0 {
- phys = <&usbphy 0>;
- phy-names = "usb";
status = "okay";
};
@@ -169,6 +167,7 @@
pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_eldo1>;
+ max-frequency = <200000000>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
@@ -177,8 +176,6 @@
};
&ohci0 {
- phys = <&usbphy 0>;
- phy-names = "usb";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
index 3d5a2ae9aa39..fb65319a3bd3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
@@ -7,7 +7,7 @@
/ {
model = "Pine64 PinePhone Developer Batch (1.0)";
- compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
+ compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64";
};
&sgm3140 {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
index c9b9f6e9ee8c..5e59d3752178 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -7,7 +7,7 @@
/ {
model = "Pine64 PinePhone Braveheart (1.1)";
- compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+ compatible = "pine64,pinephone-1.1", "pine64,pinephone", "allwinner,sun50i-a64";
};
&backlight {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
index acc0ab53b9c1..4e7e237cb46a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
@@ -7,7 +7,7 @@
/ {
model = "Pine64 PinePhone (1.2)";
- compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64";
+ compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64";
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 2dfe9bae8c67..9f69d489a81d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -21,6 +21,7 @@
compatible = "pwm-backlight";
pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ power-supply = <&reg_ps>;
/* Backlight configuration differs per PinePhone revision. */
};
@@ -31,25 +32,33 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
};
- green {
+ led-1 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
};
- red {
+ led-2 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
};
};
+ reg_ps: ps-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ps";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
reg_vbat_wifi: vbat-wifi {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
@@ -174,8 +183,6 @@
reg = <0x48>;
interrupt-parent = <&pio>;
interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
- vdd-supply = <&reg_ldo_io0>;
- leda-supply = <&reg_dldo1>;
};
/* Accelerometer/gyroscope */
@@ -196,6 +203,7 @@
&lradc {
vref-supply = <&reg_aldo3>;
+ wakeup-source;
status = "okay";
button-200 {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
new file mode 100644
index 000000000000..6265360ce623
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Icenowy Zheng <icenowy@aosc.io>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64-pinetab.dts"
+
+/ {
+ model = "PineTab, Early Adopter's version";
+ compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64";
+};
+
+&dsi {
+ /delete-node/ panel@0;
+
+ panel@0 {
+ compatible = "feixin,k101-im2byl02", "ilitek,ili9881c";
+ reg = <0>;
+ power-supply = <&reg_dc1sw>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ backlight = <&backlight>;
+ };
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
index 0494bfaf2ffa..422a8507f674 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -14,7 +14,7 @@
#include <dt-bindings/pwm/pwm.h>
/ {
- model = "PineTab";
+ model = "PineTab, Development Sample";
compatible = "pine64,pinetab", "allwinner,sun50i-a64";
aliases {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index d4069749d721..e22b94c83647 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -111,6 +111,7 @@
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
+ mmc-hs200-1_8v;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index c48692b06e1f..3402cec87035 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -32,7 +32,6 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
- non-removable;
disable-wp;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index a1864a89fb89..f0a16f355e27 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -52,12 +52,12 @@
leds {
compatible = "gpio-leds";
- capslock {
+ led-0 {
label = "teres-i:green:capslock";
gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
};
- numlock {
+ led-1 {
label = "teres-i:green:numlock";
gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 51cc30e84e26..57786fc120c3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -514,7 +514,7 @@
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- max-frequency = <200000000>;
+ max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -593,6 +593,8 @@
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>,
<&ccu RST_BUS_EHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
status = "disabled";
};
@@ -603,6 +605,8 @@
clocks = <&ccu CLK_BUS_OHCI0>,
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 9d93fe153689..4c3921ac236c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -25,13 +25,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "nanopi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index b059e20813bd..02f8e72f0cad 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -22,13 +22,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "nanopi:blue:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 8bf2db9dcbda..1010c1b22d2e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -42,13 +42,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index 33ab44072e6d..74e0444af19b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -36,13 +36,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index ef5ca6444220..d13980ed7a79 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -33,13 +33,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:red:status";
gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index de19e68eb84e..22530ace12d5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -33,13 +33,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:red:status";
gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 10489e508695..578a63dedf46 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -121,6 +121,19 @@
resets = <&ccu RST_BUS_CE>;
};
+ deinterlace: deinterlace@1e00000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01e00000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
mali: gpu@1e80000 {
compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
reg = <0x01e80000 0x30000>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 7c9dbde645b5..4f4755152fce 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -43,7 +43,7 @@
leds {
compatible = "gpio-leds";
- power {
+ led {
label = "beelink:white:power";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
default-state = "on";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
index 1a5eddc5a40f..8c6e8536b69f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
@@ -8,7 +8,7 @@
nvmem-cells = <&cpu_speed_grade>;
opp-shared;
- opp@480000000 {
+ opp-480000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <480000000>;
@@ -17,7 +17,7 @@
opp-microvolt-speed2 = <820000 820000 1200000>;
};
- opp@720000000 {
+ opp-720000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <720000000>;
@@ -26,7 +26,7 @@
opp-microvolt-speed2 = <820000 820000 1200000>;
};
- opp@816000000 {
+ opp-816000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <816000000>;
@@ -35,7 +35,7 @@
opp-microvolt-speed2 = <820000 820000 1200000>;
};
- opp@888000000 {
+ opp-888000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <888000000>;
@@ -44,7 +44,7 @@
opp-microvolt-speed2 = <820000 820000 1200000>;
};
- opp@1080000000 {
+ opp-1080000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1080000000>;
@@ -53,7 +53,7 @@
opp-microvolt-speed2 = <880000 880000 1200000>;
};
- opp@1320000000 {
+ opp-1320000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1320000000>;
@@ -62,7 +62,7 @@
opp-microvolt-speed2 = <940000 940000 1200000>;
};
- opp@1488000000 {
+ opp-1488000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1488000000>;
@@ -71,7 +71,7 @@
opp-microvolt-speed2 = <1000000 1000000 1200000>;
};
- opp@1608000000 {
+ opp-1608000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1608000000>;
@@ -80,7 +80,7 @@
opp-microvolt-speed2 = <1030000 1030000 1200000>;
};
- opp@1704000000 {
+ opp-1704000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1704000000>;
@@ -89,7 +89,7 @@
opp-microvolt-speed2 = <1060000 1060000 1200000>;
};
- opp@1800000000 {
+ opp-1800000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1800000000>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 15c9dd8c4479..7e83f6146f8a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -43,13 +43,13 @@
leds {
compatible = "gpio-leds";
- power {
+ led-0 {
label = "orangepi:red:power";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:green:status";
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index ebc120a9232f..da0875bd38d4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -42,13 +42,13 @@
leds {
compatible = "gpio-leds";
- power {
+ led-0 {
label = "orangepi:red:power";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:green:status";
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
index 7fea1e4e2d49..686f58e77004 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -34,3 +34,18 @@
non-removable;
status = "okay";
};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723bs-bt";
+ device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+ host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+ enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+ max-speed = <1500000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 961732c52aa0..b868ad17af8f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -44,17 +44,17 @@
leds {
compatible = "gpio-leds";
- heartbeat {
+ led-0 {
label = "pine-h64:green:heartbeat";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
};
- link {
+ led-1 {
label = "pine-h64:white:link";
gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
};
- status {
+ led-2 {
label = "pine-h64:blue:status";
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
};
@@ -142,6 +142,7 @@
vqmmc-supply = <&reg_bldo2>;
non-removable;
cap-mmc-hw-reset;
+ mmc-hs200-1_8v;
bus-width = <8>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 8a62a9fbe347..49e979794094 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -436,6 +436,7 @@
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
+ max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -452,6 +453,7 @@
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
+ max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -468,6 +470,7 @@
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
+ max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -680,6 +683,8 @@
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>,
<&ccu RST_BUS_EHCI0>;
+ phys = <&usb2phy 0>;
+ phy-names = "usb";
status = "disabled";
};
@@ -690,6 +695,8 @@
clocks = <&ccu CLK_BUS_OHCI0>,
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>;
+ phys = <&usb2phy 0>;
+ phy-names = "usb";
status = "disabled";
};
@@ -949,6 +956,11 @@
pins = "PL9";
function = "s_cir_rx";
};
+
+ r_rsb_pins: r-rsb-pins {
+ pins = "PL0", "PL1";
+ function = "s_rsb";
+ };
};
r_ir: ir@7040000 {
@@ -979,6 +991,20 @@
#size-cells = <0>;
};
+ r_rsb: rsb@7083000 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x07083000 0x400>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu 13>;
+ clock-frequency = <3000000>;
+ resets = <&r_ccu 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_rsb_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ths: thermal-sensor@5070400 {
compatible = "allwinner,sun50i-h6-ths";
reg = <0x05070400 0x100>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 0f893984c256..d301ac0d406b 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -203,7 +203,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <24>;
+ ngpios = <24>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -223,7 +223,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <24>;
+ ngpios = <24>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index ced03946314f..78a569d7fa20 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
@@ -44,7 +45,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index b00d0468c753..81269ccc2496 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -181,7 +181,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12A-SEI510";
+ model = "SEI510";
audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
<&tdmin_a>, <&tdmin_b>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 463a72d6bb7c..579f3d02d613 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -150,7 +150,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12A-X96-MAX";
+ model = "X96-MAX";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
new file mode 100644
index 000000000000..211191f66344
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "azw,gsking-x", "amlogic,g12b";
+ model = "Beelink GS-King X";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ power-button {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "GSKING-X";
+ audio-aux-devs = <&tdmout_a>;
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 1",
+ "TDM_A Playback", "TDMOUT_A OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_a>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+ };
+ };
+
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
+&tdmif_a {
+ status = "okay";
+};
+
+&tdmout_a {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
index 0e5c500fb78f..0e331aa5a2d7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
@@ -44,7 +44,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12B-GTKING-PRO";
+ model = "GTKING-PRO";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
index 10b87eb97b14..a7db84a500bb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -28,7 +28,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12B-GTKING";
+ model = "GTKING";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 39a09661c5f6..58ce569b2ace 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -13,6 +13,8 @@
aliases {
serial0 = &uart_AO;
ethernet0 = &ethmac;
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
};
dioo2133: audio-amplifier-0 {
@@ -211,7 +213,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12B-ODROID-N2";
+ model = "ODROID-N2";
audio-widgets = "Line", "Lineout";
audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
<&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
@@ -478,6 +480,18 @@
linux,rc-map-name = "rc-odroid";
};
+&i2c3 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
&pwm_ab {
pinctrl-0 = <&pwm_a_e_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index b57bb0befc69..0c7892600d56 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -23,7 +23,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12B-UGOOS-AM6";
+ model = "UGOOS-AM6";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index c2480bab8d33..2d7032f41e4b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -186,7 +186,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXL-LIBRETECH-S9XX-PC";
+ model = "LIBRETECH-PC";
audio-aux-devs = <&dio2133>;
audio-widgets = "Speaker", "7J4-14 LEFT",
"Speaker", "7J4-11 RIGHT";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 6b57e15aade3..dafc841f7c16 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -121,7 +121,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GX-P230-Q200";
+ model = "P230-Q200";
audio-aux-devs = <&dio2133>;
audio-widgets = "Line", "Lineout";
audio-routing = "AU2 INL", "ACODEC LOLP",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 089e0636ba8a..7273eed5292c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -134,7 +134,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXBB-NANOPI-K2";
+ model = "NANOPI-K2";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index b5b11cb9f393..f887bfb445fd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -143,7 +143,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXBB-NEXBOX-A95X";
+ model = "NEXBOX-A95X";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index c04ef57f7b3b..bfaf7f41a2d6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -176,7 +176,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXBB-ODROID-C2";
+ model = "ODROID-C2";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
index 0c1570153842..58733017eda8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -15,7 +15,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXBB-WETEK-HUB";
+ model = "WETEK-HUB";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index f2562c7de67c..6eae692792ec 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -50,7 +50,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXBB-WETEK-PLAY2";
+ model = "WETEK-PLAY2";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
index 9e43f4dca90d..2d769203f671 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -118,7 +118,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXL-LIBRETECH-S805X-AC";
+ model = "LIBRETECH-AC";
audio-widgets = "Speaker", "9J5-3 LEFT",
"Speaker", "9J5-2 RIGHT";
audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 6fe589cd2ba2..60feac0179c0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -42,10 +42,10 @@
};
};
- pwmleds {
+ led-controller {
compatible = "pwm-leds";
- power {
+ led-1 {
label = "vim:red:power";
pwms = <&pwm_AO_ab 1 7812500 0>;
max-brightness = <255>;
@@ -66,7 +66,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXL-KHADAS-VIM1";
+ model = "KHADAS-VIM";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
index 9a3c08e6e6cc..93d8f8aff70d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -159,7 +159,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXL-LIBRETECH-S905X-CC-V2";
+ model = "LIBRETECH-CC-V2";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 5ae7bb6209cb..82bfabfbd39c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -135,7 +135,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXL-LIBRETECH-S905X-CC";
+ model = "LIBRETECH-CC";
audio-aux-devs = <&dio2133>;
audio-widgets = "Line", "Lineout";
audio-routing = "AU2 INL", "ACODEC LOLN",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index bf9877d33427..18a4b7a6c5df 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -81,10 +81,10 @@
};
};
- pwmleds {
+ led-controller {
compatible = "pwm-leds";
- power {
+ led-1 {
label = "vim:red:power";
pwms = <&pwm_AO_ab 1 7812500 0>;
max-brightness = <255>;
@@ -148,7 +148,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXM-KHADAS-VIM2";
+ model = "KHADAS-VIM2";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 8f8656262ae7..877e3b989203 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -170,7 +170,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12B-KHADAS-VIM3";
+ model = "KHADAS-VIM3";
audio-aux-devs = <&tdmout_a>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
@@ -283,12 +283,12 @@
};
&ethmac {
- pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
+ pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
};
&frddr_a {
@@ -354,9 +354,9 @@
};
&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
};
&saradc {
@@ -450,7 +450,6 @@
};
};
-
&tdmif_a {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 4b517ca72059..06de0b1ce726 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -89,13 +89,12 @@
status = "okay";
};
-&sd_emmc_a {
- sd-uhs-sdr50;
-};
-
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
};
*/
+&sd_emmc_a {
+ sd-uhs-sdr50;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index a712273c905a..b2a4e823c1d8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -5,34 +5,12 @@
/dts-v1/;
-#include "meson-sm1.dtsi"
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include "meson-sm1-odroid.dtsi"
/ {
compatible = "hardkernel,odroid-c4", "amlogic,sm1";
model = "Hardkernel ODROID-C4";
- aliases {
- serial0 = &uart_AO;
- ethernet0 = &ethmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
leds {
compatible = "gpio-leds";
@@ -45,96 +23,6 @@
};
};
- tflash_vdd: regulator-tflash_vdd {
- compatible = "regulator-fixed";
-
- regulator-name = "TFLASH_VDD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
- enable-active-high;
- regulator-always-on;
- };
-
- tf_io: gpio-regulator-tf_io {
- compatible = "regulator-gpio";
-
- regulator-name = "TF_IO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
- gpios-states = <0>;
-
- states = <3300000 0>,
- <1800000 1>;
- };
-
- flash_1v8: regulator-flash_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "FLASH_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- main_12v: regulator-main_12v {
- compatible = "regulator-fixed";
- regulator-name = "12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&main_12v>;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vddcpu: regulator-vddcpu {
- /*
- * MP8756GD Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
hub_5v: regulator-hub_5v {
compatible = "regulator-fixed";
regulator-name = "HUB_5V";
@@ -147,215 +35,12 @@
enable-active-high;
};
- usb_pwr_en: regulator-usb_pwr_en {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the microUSB port power enable */
- gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vddao_1v8: regulator-vddao_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&main_12v>;
- regulator-always-on;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
sound {
- compatible = "amlogic,axg-sound-card";
- model = "SM1-ODROID-C4";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU1_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu2 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU2_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu3 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU3_CLK>;
- clock-latency = <50000>;
-};
-
-&ext_mdio {
- external_phy: ethernet-phy@0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ model = "ODROID-C4";
};
};
-&ethmac {
- pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
&gpio {
- gpio-line-names =
- /* GPIOZ */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- /* GPIOH */
- "", "", "", "", "",
- "PIN_36", /* GPIOH_5 */
- "PIN_26", /* GPIOH_6 */
- "PIN_32", /* GPIOH_7 */
- "",
- /* BOOT */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- /* GPIOC */
- "", "", "", "", "", "", "", "",
- /* GPIOA */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "",
- "PIN_27", /* GPIOA_14 */
- "PIN_28", /* GPIOA_15 */
- /* GPIOX */
- "PIN_16", /* GPIOX_0 */
- "PIN_18", /* GPIOX_1 */
- "PIN_22", /* GPIOX_2 */
- "PIN_11", /* GPIOX_3 */
- "PIN_13", /* GPIOX_4 */
- "PIN_7", /* GPIOX_5 */
- "PIN_33", /* GPIOX_6 */
- "PIN_15", /* GPIOX_7 */
- "PIN_19", /* GPIOX_8 */
- "PIN_21", /* GPIOX_9 */
- "PIN_24", /* GPIOX_10 */
- "PIN_23", /* GPIOX_11 */
- "PIN_8", /* GPIOX_12 */
- "PIN_10", /* GPIOX_13 */
- "PIN_29", /* GPIOX_14 */
- "PIN_31", /* GPIOX_15 */
- "PIN_12", /* GPIOX_16 */
- "PIN_3", /* GPIOX_17 */
- "PIN_5", /* GPIOX_18 */
- "PIN_35"; /* GPIOX_19 */
-
/*
* WARNING: The USB Hub on the Odroid-C4 needs a reset signal
* to be turned high in order to be detected by the USB Controller
@@ -370,120 +55,10 @@
};
};
-&gpio_ao {
- gpio-line-names =
- /* GPIOAO */
- "", "", "", "",
- "PIN_47", /* GPIOAO_4 */
- "", "",
- "PIN_45", /* GPIOAO_7 */
- "PIN_46", /* GPIOAO_8 */
- "PIN_44", /* GPIOAO_9 */
- "PIN_42", /* GPIOAO_10 */
- "",
- /* GPIOE */
- "", "", "";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
linux,rc-map-name = "rc-odroid";
};
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&saradc {
- status = "okay";
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <200000000>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&tflash_vdd>;
- vqmmc-supply = <&tf_io>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&flash_1v8>;
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_pwr_en>;
-};
-
-&usb2_phy0 {
- phy-supply = <&vcc_5v>;
-};
-
&usb2_phy1 {
/* Enable the hub which is connected to this port */
phy-supply = <&hub_5v>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
new file mode 100644
index 000000000000..bf15700c4b15
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-odroid.dtsi"
+
+/ {
+ compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
+ model = "Hardkernel ODROID-HC4";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
+ };
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ cooling-levels = <0 120 170 220>;
+ pwms = <&pwm_cd 1 40000 0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ panic-indicator;
+ };
+
+ led-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ sound {
+ model = "ODROID-HC4";
+ };
+};
+
+&cpu_thermal {
+ cooling-maps {
+ map {
+ trip = <&cpu_passive>;
+ cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&ir {
+ linux,rc-map-name = "rc-odroid";
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ status = "okay";
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
+&pcie {
+ status = "okay";
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_d_x6_pins>;
+};
+
+&sd_emmc_c {
+ status = "disabled";
+};
+
+&usb {
+ phys = <&usb2_phy0>, <&usb2_phy1>;
+ phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
new file mode 100644
index 000000000000..d14716b3d0f1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = &ethmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ tflash_vdd: regulator-tflash_vdd {
+ compatible = "regulator-fixed";
+
+ regulator-name = "TFLASH_VDD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ tf_io: gpio-regulator-tf_io {
+ compatible = "regulator-gpio";
+
+ regulator-name = "TF_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0>,
+ <1800000 1>;
+ };
+
+ flash_1v8: regulator-flash_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "FLASH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ main_12v: regulator-main_12v {
+ compatible = "regulator-fixed";
+ regulator-name = "12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&main_12v>;
+ };
+
+ vcc_1v8: regulator-vcc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ /* FIXME: actually controlled by VDDCPU_B_EN */
+ };
+
+ vddcpu: regulator-vddcpu {
+ /*
+ * MP8756GD Regulator.
+ */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU";
+ regulator-min-microvolt = <721000>;
+ regulator-max-microvolt = <1022000>;
+
+ vin-supply = <&main_12v>;
+
+ pwms = <&pwm_AO_cd 1 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ usb_pwr_en: regulator-usb_pwr_en {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR_EN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ /* Connected to the microUSB port power enable */
+ gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vddao_1v8: regulator-vddao_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&main_12v>;
+ regulator-always-on;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU1_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu2 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU2_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu3 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU3_CLK>;
+ clock-latency = <50000>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&ethmac {
+ pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&gpio {
+ gpio-line-names =
+ /* GPIOZ */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* GPIOH */
+ "", "", "", "", "",
+ "PIN_36", /* GPIOH_5 */
+ "PIN_26", /* GPIOH_6 */
+ "PIN_32", /* GPIOH_7 */
+ "",
+ /* BOOT */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* GPIOC */
+ "", "", "", "", "", "", "", "",
+ /* GPIOA */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "",
+ "PIN_27", /* GPIOA_14 */
+ "PIN_28", /* GPIOA_15 */
+ /* GPIOX */
+ "PIN_16", /* GPIOX_0 */
+ "PIN_18", /* GPIOX_1 */
+ "PIN_22", /* GPIOX_2 */
+ "PIN_11", /* GPIOX_3 */
+ "PIN_13", /* GPIOX_4 */
+ "PIN_7", /* GPIOX_5 */
+ "PIN_33", /* GPIOX_6 */
+ "PIN_15", /* GPIOX_7 */
+ "PIN_19", /* GPIOX_8 */
+ "PIN_21", /* GPIOX_9 */
+ "PIN_24", /* GPIOX_10 */
+ "PIN_23", /* GPIOX_11 */
+ "PIN_8", /* GPIOX_12 */
+ "PIN_10", /* GPIOX_13 */
+ "PIN_29", /* GPIOX_14 */
+ "PIN_31", /* GPIOX_15 */
+ "PIN_12", /* GPIOX_16 */
+ "PIN_3", /* GPIOX_17 */
+ "PIN_5", /* GPIOX_18 */
+ "PIN_35"; /* GPIOX_19 */
+};
+
+&gpio_ao {
+ gpio-line-names =
+ /* GPIOAO */
+ "", "", "", "",
+ "PIN_47", /* GPIOAO_4 */
+ "", "",
+ "PIN_45", /* GPIOAO_7 */
+ "PIN_46", /* GPIOAO_8 */
+ "PIN_44", /* GPIOAO_9 */
+ "PIN_42", /* GPIOAO_10 */
+ "",
+ /* GPIOE */
+ "", "", "";
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <200000000>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&tflash_vdd>;
+ vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&flash_1v8>;
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+ phy-supply = <&vcc_5v>;
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 5ab139a34c01..2194a778973f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -101,20 +101,20 @@
};
};
- leds {
+ led-controller-1 {
compatible = "gpio-leds";
- led-bluetooth {
+ led-1 {
label = "sei610:blue:bt";
gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
default-state = "off";
};
};
- pwmleds {
+ led-controller-2 {
compatible = "pwm-leds";
- power {
+ led-2 {
label = "sei610:red:power";
pwms = <&pwm_AO_ab 0 30518 0>;
max-brightness = <255>;
@@ -220,7 +220,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "SM1-SEI610";
+ model = "SEI610";
audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
<&tdmin_a>, <&tdmin_b>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
index ef26c23603ce..ebebc0cd421f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
new file mode 100644
index 000000000000..ee3ed612274c
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4906.dtsi"
+
+/ {
+ compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908";
+ model = "Netgear R8000P";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00 0x00 0x00 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&nandcs {
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "cferom";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "firmware";
+ reg = <0x100000 0x4400000>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
new file mode 100644
index 000000000000..66023d553524
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "bcm4908.dtsi"
+
+/ {
+ cpus {
+ /delete-node/ cpu@2;
+
+ /delete-node/ cpu@3;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 13c6b86eef21..6e4ad66ff536 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -44,6 +44,57 @@
};
};
+&ports {
+ port@0 {
+ label = "lan2";
+ };
+
+ port@1 {
+ label = "lan1";
+ };
+
+ port@2 {
+ label = "lan6";
+ };
+
+ port@3 {
+ label = "lan5";
+ };
+
+ /* External BCM53134S switch */
+ port@7 {
+ label = "sw";
+ reg = <7>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+};
+
+&mdio {
+ /* lan8 */
+ ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ /* lan7 */
+ ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ /* lan4 */
+ ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ /* lan3 */
+ ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
&nandcs {
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index f873dc44ce9c..9354077f74cd 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -108,7 +108,7 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x00 0x00 0x80000000 0x10000>;
+ ranges = <0x00 0x00 0x80000000 0x281000>;
usb@c300 {
compatible = "generic-ehci";
@@ -130,6 +130,104 @@
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ ethernet-switch@80000 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0 0x80000 0x50000>;
+
+ ethernet-switch@0 {
+ compatible = "brcm,bcm4908-switch";
+ reg = <0x0 0x40000>,
+ <0x40000 0x110>,
+ <0x40340 0x30>,
+ <0x40380 0x30>,
+ <0x40600 0x34>,
+ <0x40800 0x208>;
+ reg-names = "core", "reg", "intrl2_0",
+ "intrl2_1", "fcb", "acb";
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ brcm,num-gphy = <5>;
+ brcm,num-rgmii-ports = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "internal";
+ phy-handle = <&phy8>;
+ };
+
+ port@1 {
+ reg = <1>;
+ phy-mode = "internal";
+ phy-handle = <&phy9>;
+ };
+
+ port@2 {
+ reg = <2>;
+ phy-mode = "internal";
+ phy-handle = <&phy10>;
+ };
+
+ port@3 {
+ reg = <3>;
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ };
+ };
+
+ mdio: mdio@405c0 {
+ compatible = "brcm,unimac-mdio";
+ reg = <0x405c0 0x8>;
+ reg-names = "mdio";
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ phy8: ethernet-phy@8 {
+ reg = <8>;
+ };
+
+ phy9: ethernet-phy@9 {
+ reg = <9>;
+ };
+
+ phy10: ethernet-phy@a {
+ reg = <10>;
+ };
+
+ phy11: ethernet-phy@b {
+ reg = <11>;
+ };
+
+ phy12: ethernet-phy@c {
+ reg = <12>;
+ };
+ };
+ };
+
+ procmon: syscon@280000 {
+ compatible = "simple-bus";
+ reg = <0x280000 0x1000>;
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ power-controller@2800c0 {
+ compatible = "brcm,bcm4908-pmb";
+ reg = <0x2800c0 0x40>;
+ #power-domain-cells = <1>;
+ };
+ };
};
bus@ff800000 {
@@ -164,7 +262,7 @@
nand@1800 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+ compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
reg = <0x1800 0x600>, <0x2000 0x10>;
reg-names = "nand", "nand-int-base";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -177,6 +275,21 @@
};
};
+ misc@2600 {
+ compatible = "brcm,misc", "simple-mfd";
+ reg = <0x2600 0xe4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x2600 0xe4>;
+
+ reset-controller@2644 {
+ compatible = "brcm,bcm4908-misc-pcie-reset";
+ reg = <0x44 0x04>;
+ #reset-cells = <1>;
+ };
+ };
+
reboot {
compatible = "syscon-reboot";
regmap = <&timer>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index 43aa5e9c0020..8fe7325cfbb2 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -56,70 +56,6 @@
};
};
-&sata0 {
- status = "okay";
-};
-
-&sata_phy0{
- status = "okay";
-};
-
-&sata1 {
- status = "okay";
-};
-
-&sata_phy1{
- status = "okay";
-};
-
-&sata2 {
- status = "okay";
-};
-
-&sata_phy2{
- status = "okay";
-};
-
-&sata3 {
- status = "okay";
-};
-
-&sata_phy3{
- status = "okay";
-};
-
-&sata4 {
- status = "okay";
-};
-
-&sata_phy4{
- status = "okay";
-};
-
-&sata5 {
- status = "okay";
-};
-
-&sata_phy5{
- status = "okay";
-};
-
-&sata6 {
- status = "okay";
-};
-
-&sata_phy6{
- status = "okay";
-};
-
-&sata7 {
- status = "okay";
-};
-
-&sata_phy7{
- status = "okay";
-};
-
&pwm {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
deleted file mode 100644
index 8c68e0c26f1b..000000000000
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2016-2017 Broadcom. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
- sata {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x67d00000 0x00800000>;
-
- sata0: ahci@0 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00000000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata0_port0: sata-port@0 {
- reg = <0>;
- phys = <&sata0_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy0: sata_phy@2100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00002100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata0_phy0: sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata1: ahci@10000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00010000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata1_port0: sata-port@0 {
- reg = <0>;
- phys = <&sata1_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy1: sata_phy@12100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00012100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata1_phy0: sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata2: ahci@20000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00020000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata2_port0: sata-port@0 {
- reg = <0>;
- phys = <&sata2_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy2: sata_phy@22100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00022100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata2_phy0: sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata3: ahci@30000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00030000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata3_port0: sata-port@0 {
- reg = <0>;
- phys = <&sata3_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy3: sata_phy@32100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00032100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata3_phy0: sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata4: ahci@100000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00100000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata4_port0: sata-port@0 {
- reg = <0>;
- phys = <&sata4_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy4: sata_phy@102100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00102100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata4_phy0: sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata5: ahci@110000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00110000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata5_port0: sata-port@0 {
- reg = <0>;
- phys = <&sata5_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy5: sata_phy@112100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00112100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata5_phy0: sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata6: ahci@120000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00120000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata6_port0: sata-port@0 {
- reg = <0>;
- phys = <&sata6_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy6: sata_phy@122100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00122100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata6_phy0: sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata7: ahci@130000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00130000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata7_port0: sata-port@0 {
- reg = <0>;
- phys = <&sata7_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy7: sata_phy@132100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00132100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata7_phy0: sata-phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
- };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index b425b12c3ed2..2ffb2c92182a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -285,7 +285,6 @@
};
#include "stingray-fs4.dtsi"
- #include "stingray-sata.dtsi"
#include "stingray-pcie.dtsi"
#include "stingray-usb.dtsi"
@@ -309,12 +308,6 @@
#size-cells = <0>;
};
- mdio@2 { /* SATA */
- reg = <0x2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
mdio@3 { /* USB */
reg = <0x3>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 03486a8ffc67..413cac63a1cb 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -388,7 +388,7 @@
pmic@66 {
compatible = "samsung,s2mps13-pmic";
interrupt-parent = <&gpa0>;
- interrupts = <7 IRQ_TYPE_NONE>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
reg = <0x66>;
samsung,s2mps11-wrstbi-ground;
@@ -793,7 +793,7 @@
compatible = "samsung,s3fwrn5-i2c";
reg = <0x27>;
interrupt-parent = <&gpa1>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 695d4c140646..125c03f351d9 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -90,7 +90,7 @@
pmic@66 {
compatible = "samsung,s2mps15-pmic";
reg = <0x66>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpa0>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq>;
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 6f0777ee6cd6..6438db3822f8 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
@@ -33,16 +34,23 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index 67702667ed8a..2517528f684f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -7,6 +7,7 @@
*/
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
#include "fsl-ls1012a.dtsi"
/ {
@@ -57,6 +58,26 @@
};
};
+&dspi {
+ bus-num = <0>;
+ status = "okay";
+
+ serial@0 {
+ compatible = "nxp,sc16is740";
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+ clocks = <&sc16is7xx_clk>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ sc16is7xx_clk: clock-sc16is7xx {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
&duart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 449475a97bf1..e22c5e77fecd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -13,6 +13,11 @@
model = "LS1012A QDS Board";
compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
+ aliases {
+ mmc0 = &esdhc0;
+ mmc1 = &esdhc1;
+ };
+
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index d45c17620b98..79f155dedb2d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -7,11 +7,17 @@
*/
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
#include "fsl-ls1012a.dtsi"
/ {
model = "LS1012A RDB Board";
compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+ aliases {
+ mmc0 = &esdhc0;
+ mmc1 = &esdhc1;
+ };
};
&duart0 {
@@ -33,6 +39,50 @@
&i2c0 {
status = "okay";
+
+ accelerometer@1e {
+ compatible = "nxp,fxos8700";
+ reg = <0x1e>;
+ interrupt-parent = <&gpio26>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
+ };
+
+ gyroscope@20 {
+ compatible = "nxp,fxas21002c";
+ reg = <0x20>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pcal9555a";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@25 {
+ compatible = "nxp,pcal9555a";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio26: gpio@26 {
+ compatible = "nxp,pcal9555a";
+ reg = <0x26>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ current-sensor@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
};
&qspi {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 626b709d1fb9..7de6b376d792 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -7,6 +7,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -34,7 +35,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
#cooling-cells = <2>;
cpu-idle-states = <&CPU_PH20>;
};
@@ -148,7 +149,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -156,7 +160,8 @@
compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <0 62 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -174,7 +179,8 @@
compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
reg = <0x0 0x1580000 0x0 0x10000>;
interrupts = <0 65 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -341,7 +347,8 @@
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -351,7 +358,8 @@
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -362,7 +370,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -372,7 +381,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -380,7 +390,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -409,7 +420,7 @@
"fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
big-endian;
};
@@ -418,8 +429,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b50000 0x0 0x10000>;
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>,
- <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 47>,
@@ -432,8 +449,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b60000 0x0 0x10000>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>,
- <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 45>,
@@ -453,8 +476,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 3>,
- <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
usb0: usb@2f00000 {
@@ -473,7 +498,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
dma-coherent;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index d66d8b2c3d1a..6b575efd84a7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -107,3 +107,7 @@
ethernet = <&enetc_port2>;
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
new file mode 100644
index 000000000000..6c309b97587d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 1 which has one ethernet port. It is
+ * different than the base variant, which also has one port, but here the
+ * port is connected via RGMII. This port is not TSN aware.
+ * None of the four SerDes lanes are used by the module, instead they are
+ * all led out to the carrier for customer use.
+ *
+ * Copyright (C) 2020 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+ model = "Kontron SMARC-sAL28 (4 Lanes)";
+ compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_port0 {
+ status = "disabled";
+ /*
+ * Delete both the phy-handle to the old phy0 label as well as
+ * the mdio node with the old phy node with the old phy0 label.
+ */
+ /delete-property/ phy-handle;
+ /delete-node/ mdio;
+};
+
+&enetc_port1 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@4 {
+ reg = <0x4>;
+ eee-broken-1000t;
+ eee-broken-100tx;
+ qca,clk-out-frequency = <125000000>;
+ qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+ vddio-supply = <&vddh>;
+
+ vddio: vddio-regulator {
+ regulator-name = "VDDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddh: vddh-regulator {
+ regulator-name = "VDDH";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index c45d7b40e374..ed4e69e87e30 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -8,6 +8,8 @@
*/
/dts-v1/;
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls1028a-kontron-sl28.dts"
/ {
@@ -120,7 +122,8 @@
mclk: clock-mclk@f130080 {
compatible = "fsl,vf610-sai-clock";
reg = <0x0 0xf130080 0x0 0x80>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
#clock-cells = <0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index c0786b713791..fbcba9cb8503 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -109,6 +109,14 @@
};
};
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
&dspi0 {
bus-num = <0>;
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index c1d1ba459307..41ae6e7675ba 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -85,6 +85,22 @@
};
};
+&can0 {
+ status = "okay";
+
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+};
+
&esdhc {
sd-uhs-sdr104;
sd-uhs-sdr50;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 6c8a61c2cc74..262fbad8f0ec 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -8,6 +8,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@
compatible = "arm,cortex-a72";
reg = <0x0>;
enable-method = "psci";
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -41,7 +42,7 @@
compatible = "arm,cortex-a72";
reg = <0x1>;
enable-method = "psci";
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -205,9 +206,20 @@
};
dcfg: syscon@1e00000 {
- compatible = "fsl,ls1028a-dcfg", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd";
reg = <0x0 0x1e00000 0x0 0x10000>;
+ ranges = <0x0 0x0 0x1e00000 0x10000>;
little-endian;
+
+ fspi_clk: clock-controller@900 {
+ compatible = "fsl,ls1028a-flexspi-clk";
+ reg = <0x900 0x4>;
+ #clock-cells = <0>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 0>;
+ clock-output-names = "fspi_clk";
+ };
};
rst: syscon@1e60000 {
@@ -235,7 +247,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -245,7 +258,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -255,7 +269,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -265,7 +280,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -275,7 +291,8 @@
#size-cells = <0>;
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -285,7 +302,8 @@
#size-cells = <0>;
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -295,7 +313,8 @@
#size-cells = <0>;
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -305,7 +324,8 @@
#size-cells = <0>;
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -317,7 +337,7 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 2 0>, <&clockgen 2 0>;
+ clocks = <&fspi_clk>, <&fspi_clk>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
@@ -329,7 +349,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 62>, <&edma0 0 60>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@@ -344,7 +365,8 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 58>, <&edma0 0 56>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@@ -359,7 +381,8 @@
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 54>, <&edma0 0 2>;
dma-names = "tx", "rx";
spi-num-chipselects = <3>;
@@ -372,7 +395,7 @@
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@@ -385,7 +408,7 @@
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
broken-cd;
@@ -395,19 +418,25 @@
};
can0: can@2180000 {
- compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+ compatible = "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
can1: can@2190000 {
- compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+ compatible = "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -416,7 +445,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -424,7 +454,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -433,7 +464,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2260000 0x0 0x1000>;
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 32>,
@@ -445,7 +477,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2270000 0x0 0x1000>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 30>,
@@ -457,7 +490,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2280000 0x0 0x1000>;
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 28>,
@@ -469,7 +503,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2290000 0x0 0x1000>;
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 26>,
@@ -481,7 +516,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22a0000 0x0 0x1000>;
interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 24>,
@@ -493,7 +529,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22b0000 0x0 0x1000>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 22>,
@@ -512,8 +549,10 @@
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 1>,
- <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
gpio1: gpio@2300000 {
@@ -575,7 +614,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -747,14 +787,20 @@
cluster1_core0_watchdog: watchdog@c000000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: watchdog@c010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
@@ -763,8 +809,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf100000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 4>,
@@ -778,8 +830,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf110000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 6>,
@@ -793,8 +851,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf120000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 8>,
@@ -808,8 +872,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf130000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 10>,
@@ -823,8 +893,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf140000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 12>,
@@ -838,8 +914,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf150000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 14>,
@@ -960,7 +1042,7 @@
ethernet@0,4 {
compatible = "fsl,enetc-ptp";
reg = <0x000400 0 0 0 0>;
- clocks = <&clockgen 2 3>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
little-endian;
fsl,extts-fifo;
};
@@ -1055,8 +1137,10 @@
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "DE", "SE";
- clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
- <&clockgen 2 2>;
+ clocks = <&dpclk>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
arm,malidp-arqos-value = <0xd000d000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index bbae4b353d3f..5a8a1dc4262d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -8,6 +8,7 @@
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -44,7 +45,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -54,7 +55,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -64,7 +65,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -74,7 +75,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -311,6 +312,31 @@
compatible = "fsl,ls1043a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1570000 0x10000>;
+
+ extirq: interrupt-controller@1ac {
+ compatible = "fsl,ls1043a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1ac 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
};
crypto: crypto@1700000 {
@@ -377,7 +403,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <0 99 0x4>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -476,7 +505,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 64 0x4>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -489,7 +519,8 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <0 65 0x4>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -502,7 +533,8 @@
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
@@ -516,7 +548,8 @@
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -527,7 +560,8 @@
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <0 58 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -538,7 +572,8 @@
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <0 59 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -546,28 +581,32 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart2: serial@21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart3: serial@21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
gpio1: gpio@2300000 {
@@ -679,7 +718,7 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <0 48 0x4>;
- clocks = <&clockgen 0 0>;
+ clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
clock-names = "ipg";
status = "disabled";
};
@@ -688,7 +727,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <0 49 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -697,7 +737,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <0 50 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -706,7 +747,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <0 51 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -715,7 +757,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <0 52 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -724,7 +767,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <0 53 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -733,7 +777,8 @@
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <0 83 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "wdog";
big-endian;
};
@@ -750,8 +795,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 0>,
- <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
usb0: usb@2f00000 {
@@ -793,7 +840,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
dma-coherent;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index d53ccc56bb63..60acdf0b689e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -3,6 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019-2020 NXP
*
* Mingkai Hu <mingkai.hu@nxp.com>
*/
@@ -74,6 +75,8 @@
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
+ /* IRQ_RTC_B -> IRQ05, active low */
+ interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 565934cbfa28..1d6dfd189c7f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -8,6 +8,7 @@
* Mingkai Hu <mingkai.hu@nxp.com>
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -39,7 +40,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -49,7 +50,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -59,7 +60,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x2>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -69,7 +70,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x3>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -295,7 +296,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -303,7 +307,7 @@
compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -314,6 +318,31 @@
compatible = "fsl,ls1046a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1570000 0x10000>;
+
+ extirq: interrupt-controller@1ac {
+ compatible = "fsl,ls1046a-extirq", "fsl,ls1043a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1ac 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
};
crypto: crypto@1700000 {
@@ -454,7 +483,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -466,7 +496,8 @@
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
@@ -479,7 +510,8 @@
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -489,7 +521,8 @@
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -499,7 +532,8 @@
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -507,7 +541,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -515,7 +550,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -523,7 +559,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -531,7 +568,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -579,7 +617,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -588,7 +627,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -597,7 +637,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -606,7 +647,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -615,7 +657,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -624,7 +667,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -633,7 +677,8 @@
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
big-endian;
};
@@ -649,8 +694,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 1>,
- <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
usb0: usb@2f00000 {
@@ -689,7 +736,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
msi1: msi-controller@1580000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 528ec72d0b83..bf7b43ab1293 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -2,7 +2,7 @@
/*
* Device Tree file for NXP LS1088A RDB Board.
*
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
@@ -158,8 +158,8 @@
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
- /* IRQ10_B */
- interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ /* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
+ interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
};
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 6403455ed039..8ffbc9fde041 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -7,6 +7,7 @@
* Harninder Rai <harninder.rai@nxp.com>
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -39,7 +40,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -48,7 +49,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -57,7 +58,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x100>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -75,7 +76,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x101>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -84,7 +85,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x102>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -93,7 +94,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x103>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -220,6 +221,37 @@
little-endian;
};
+ isc: syscon@1f70000 {
+ compatible = "fsl,ls1088a-isc", "syscon";
+ reg = <0x0 0x1f70000 0x0 0x10000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+ extirq: interrupt-controller@14 {
+ compatible = "fsl,ls1088a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x14 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
@@ -279,7 +311,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
spi-num-chipselects = <6>;
status = "disabled";
};
@@ -287,7 +320,8 @@
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -295,7 +329,8 @@
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -360,7 +395,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -370,7 +406,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -380,7 +417,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -390,7 +428,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -403,7 +442,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -412,7 +454,7 @@
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
clock-frequency = <0>;
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@@ -447,7 +489,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -698,7 +741,8 @@
ptp-timer@8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
little-endian;
fsl,extts-fifo;
};
@@ -787,56 +831,80 @@
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core2_watchdog: wdt@c020000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc020000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core3_watchdog: wdt@c030000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc030000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core2_watchdog: wdt@c120000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc120000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core3_watchdog: wdt@c130000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc130000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index f9c1d30cf4a7..76ab68d2de0b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -9,6 +9,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls208xa.dtsi"
&cpu {
@@ -16,7 +17,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@@ -26,7 +27,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@@ -36,7 +37,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x100>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@@ -46,7 +47,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x101>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@@ -56,7 +57,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x200>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
@@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x201>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
@@ -76,7 +77,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x300>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
next-level-cache = <&cluster3_l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -86,7 +87,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x301>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index a5f668d786b8..da24dc127698 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -9,6 +9,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls208xa.dtsi"
&cpu {
@@ -16,7 +17,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@@ -26,7 +27,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@@ -36,7 +37,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x100>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@@ -46,7 +47,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x101>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@@ -56,7 +57,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x200>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
next-level-cache = <&cluster2_l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x201>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
@@ -76,7 +77,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x300>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
@@ -86,7 +87,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x301>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index d0d670227ae2..4b71c4fcb35f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -3,7 +3,7 @@
* Device Tree file for Freescale LS2080A RDB Board.
*
* Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
@@ -56,6 +56,8 @@
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
+ /* IRQ_RTC_B -> IRQ06, active low */
+ interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index c68901f8c6f0..135ac8210871 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -3,12 +3,13 @@
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -277,6 +278,37 @@
little-endian;
};
+ isc: syscon@1f70000 {
+ compatible = "fsl,ls2080a-isc", "syscon";
+ reg = <0x0 0x1f70000 0x0 0x10000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+ extirq: interrupt-controller@14 {
+ compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x14 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
@@ -325,84 +357,112 @@
serial0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 0x4>; /* Level high type */
};
serial1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 0x4>; /* Level high type */
};
serial2: serial@21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 33 0x4>; /* Level high type */
};
serial3: serial@21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 33 0x4>; /* Level high type */
};
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster3_core0_watchdog: wdt@c200000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc200000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster3_core1_watchdog: wdt@c210000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc210000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster4_core0_watchdog: wdt@c300000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc300000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster4_core1_watchdog: wdt@c310000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc310000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
@@ -453,7 +513,8 @@
ptp-timer@8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
little-endian;
fsl,extts-fifo;
};
@@ -864,7 +925,8 @@
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 26 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <0>;
@@ -875,7 +937,8 @@
compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@@ -934,7 +997,8 @@
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
i2c1: i2c@2010000 {
@@ -945,7 +1009,8 @@
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
i2c2: i2c@2020000 {
@@ -956,7 +1021,8 @@
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
i2c3: i2c@2030000 {
@@ -967,7 +1033,8 @@
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
ifc: ifc@2240000 {
@@ -991,7 +1058,10 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
@@ -1089,7 +1159,8 @@
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
interrupts = <0 133 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
};
@@ -1098,7 +1169,8 @@
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3210000 0x0 0x10000>;
interrupts = <0 136 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index d87d16460875..459dccad8326 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -40,6 +40,7 @@
rgmii_phy1: ethernet-phy@1 {
reg = <1>;
+ qca,smarteee-tw-us-1g = <24>;
};
};
@@ -134,8 +135,6 @@
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
- // IRQ10_B
- interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index f3741a32e868..2b63235ca627 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -8,6 +8,7 @@
/dts-v1/;
#include "fsl-lx2160a-cex7.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
/ {
aliases {
@@ -18,6 +19,17 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key {
+ label = "power";
+ linux,can-disable;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&emdio2 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 2d1fe6c3797f..d858d9c8b583 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -14,6 +14,8 @@
aliases {
crypto = &crypto;
+ mmc0 = &esdhc0;
+ mmc1 = &esdhc1;
serial0 = &uart0;
};
@@ -31,6 +33,14 @@
};
};
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
&crypto {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 7723ad5efd37..5dbf27493e8b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -2,7 +2,7 @@
//
// Device Tree file for LX2160ARDB
//
-// Copyright 2018 NXP
+// Copyright 2018-2020 NXP
/dts-v1/;
@@ -14,6 +14,8 @@
aliases {
crypto = &crypto;
+ mmc0 = &esdhc0;
+ mmc1 = &esdhc1;
serial0 = &uart0;
};
@@ -87,6 +89,22 @@
};
};
+&can0 {
+ status = "okay";
+
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+};
+
&esdhc0 {
sd-uhs-sdr104;
sd-uhs-sdr50;
@@ -175,8 +193,8 @@
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
- // IRQ10_B
- interrupts = <0 150 0x4>;
+ /* IRQ_RTC_B -> IRQ08, active low */
+ interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 197397777c83..0551f6f4c313 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -4,6 +4,7 @@
//
// Copyright 2018-2020 NXP
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -47,7 +48,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -64,7 +65,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x100>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -81,7 +82,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x101>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -98,7 +99,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x200>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -115,7 +116,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x201>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -132,7 +133,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x300>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -149,7 +150,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x301>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -166,7 +167,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x400>;
- clocks = <&clockgen 1 4>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 4>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -183,7 +184,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x401>;
- clocks = <&clockgen 1 4>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 4>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -200,7 +201,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x500>;
- clocks = <&clockgen 1 5>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 5>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -217,7 +218,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x501>;
- clocks = <&clockgen 1 5>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 5>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -234,7 +235,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x600>;
- clocks = <&clockgen 1 6>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 6>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -251,7 +252,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x601>;
- clocks = <&clockgen 1 6>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 6>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -268,7 +269,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x700>;
- clocks = <&clockgen 1 7>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 7>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -285,7 +286,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x701>;
- clocks = <&clockgen 1 7>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 7>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -664,6 +665,37 @@
little-endian;
};
+ isc: syscon@1f70000 {
+ compatible = "fsl,lx2160a-isc", "syscon";
+ reg = <0x0 0x1f70000 0x0 0x10000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+ extirq: interrupt-controller@14 {
+ compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x14 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
@@ -685,7 +717,8 @@
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -697,7 +730,8 @@
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -708,7 +742,8 @@
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -719,7 +754,8 @@
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -730,7 +766,8 @@
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -742,7 +779,8 @@
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -753,7 +791,8 @@
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -764,7 +803,8 @@
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -776,7 +816,10 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
@@ -787,7 +830,8 @@
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <0>;
@@ -800,7 +844,8 @@
#size-cells = <0>;
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <1>;
@@ -813,7 +858,8 @@
#size-cells = <0>;
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <2>;
@@ -824,7 +870,8 @@
compatible = "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dma-coherent;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
@@ -837,7 +884,8 @@
compatible = "fsl,esdhc";
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <0 63 0x4>; /* Level high type */
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dma-coherent;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
@@ -847,6 +895,30 @@
status = "disabled";
};
+ can0: can@2180000 {
+ compatible = "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>,
+ <&clockgen QORIQ_CLK_SYSCLK 0>;
+ clock-names = "ipg", "per";
+ fsl,clk-source = <0>;
+ status = "disabled";
+ };
+
+ can1: can@2190000 {
+ compatible = "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>,
+ <&clockgen QORIQ_CLK_SYSCLK 0>;
+ clock-names = "ipg", "per";
+ fsl,clk-source = <0>;
+ status = "disabled";
+ };
+
uart0: serial@21c0000 {
compatible = "arm,sbsa-uart","arm,pl011";
reg = <0x0 0x21c0000 0x0 0x1000>;
@@ -973,7 +1045,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -984,7 +1057,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -995,7 +1069,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -1006,7 +1081,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -1279,7 +1355,8 @@
ptp-timer@8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
little-endian;
fsl,extts-fifo;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
index 91786848bd30..e1defee1ad27 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
@@ -14,6 +14,8 @@
aliases {
crypto = &crypto;
+ mmc0 = &esdhc0;
+ mmc1 = &esdhc1;
serial0 = &uart0;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index d6b9dedd168f..6f5e63696ec0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -102,7 +102,6 @@
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
- clock-names = "xclk";
DCVDD-supply = <&reg_audio>;
DBVDD-supply = <&reg_audio>;
AVDD-supply = <&reg_audio>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index d897913537ca..988f8ab679ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -256,8 +256,10 @@
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <4>;
non-removable;
cap-power-off-card;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
new file mode 100644
index 000000000000..c0c384d76147
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Boundary Devices i.MX8MMini Nitrogen8MM Rev2 board.
+ * Adrien Grassein <adrien.grassein@gmail.com.com>
+ */
+/dts-v1/;
+#include "imx8mm.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2";
+ compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm";
+};
+
+&A53_0 {
+ cpu-supply = <&reg_buck3>;
+};
+
+&A53_1 {
+ cpu-supply = <&reg_buck3>;
+};
+
+&A53_2 {
+ cpu-supply = <&reg_buck3>;
+};
+
+&A53_3 {
+ cpu-supply = <&reg_buck3>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ interrupts-extended = <&gpio3 16 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@8 {
+ compatible = "nxp,pf8121a";
+ reg = <0x8>;
+
+ regulators {
+ reg_ldo1: ldo1 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_ldo2: ldo2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_ldo3: ldo3 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_ldo4: ldo4 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_buck1: buck1 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_buck2: buck2 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_buck3: buck3 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_buck4: buck4 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_buck5: buck5 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_buck6: buck6 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_buck7: buck7 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vsnvs: vsnvs {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ i2cmux@70 {
+ compatible = "nxp,pca9540";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c3 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "microcrystal,rv4162";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3a_rv4162>;
+ interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+ };
+ };
+ };
+};
+
+/* console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+ bus-width = <8>;
+ sdhci-caps-mask = <0x80000000 0x0>;
+ non-removable;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ status = "okay";
+};
+
+/* sdcard */
+&usdhc2 {
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ vqmmc-supply = <&reg_ldo2>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x159
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x09
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3a_rv4162: i2c3a-rv4162grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0
+ MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0
+ MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0
+ MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0
+ MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x141
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
+ MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4
+ MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4
+ MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4
+ MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
+ MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6
+ MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6
+ MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6
+ MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x03
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x140
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
new file mode 100644
index 000000000000..c769fadbd008
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key_erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ pinctrl-0 = <&pinctrl_gsc>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@16 {
+ gw,mode = <4>;
+ reg = <0x16>;
+ label = "fan_tach";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_adc1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_adc2";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_dram";
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_1p2";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_1p0";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_0p95";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_1p8";
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+
+ fan-controller@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "gw,gsc-fan";
+ reg = <0x0a>;
+ };
+ };
+
+ gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+
+ pmic@69 {
+ compatible = "mps,mp5416";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ reg = <0x69>;
+
+ regulators {
+ buck1 {
+ regulator-name = "vdd_0p95";
+ regulator-min-microvolt = <805000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-max-microamp = <2500000>;
+ regulator-boot-on;
+ };
+
+ buck2 {
+ regulator-name = "vdd_soc";
+ regulator-min-microvolt = <805000>;
+ regulator-max-microvolt = <900000>;
+ regulator-max-microamp = <1000000>;
+ regulator-boot-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <805000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-max-microamp = <2200000>;
+ regulator-boot-on;
+ };
+
+ buck4 {
+ regulator-name = "vdd_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-max-microamp = <500000>;
+ regulator-boot-on;
+ };
+
+ ldo1 {
+ regulator-name = "nvcc_snvs_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-max-microamp = <300000>;
+ regulator-boot-on;
+ };
+
+ ldo2 {
+ regulator-name = "vdd_snvs_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ };
+
+ ldo3 {
+ regulator-name = "vdd_0p95";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ };
+
+ ldo4 {
+ regulator-name = "vdd_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ eeprom@52 {
+ compatible = "atmel,24c32";
+ reg = <0x52>;
+ pagesize = <32>;
+ };
+};
+
+/* console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x19
+ >;
+ };
+
+ pinctrl_gsc: gscgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x159
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts
new file mode 100644
index 000000000000..3f88c4ad5716
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw71xx.dtsi"
+
+/ {
+ model = "Gateworks Venice GW71xx-0x i.MX8MM Development Kit";
+ compatible = "gw,imx8mm-gw71xx-0x", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
new file mode 100644
index 000000000000..905b68a3daa5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ };
+
+ led-controller {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1_en>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+/* off-board header */
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ accelerometer@19 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ compatible = "st,lis2de12";
+ reg = <0x19>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "INT1";
+ };
+};
+
+/* off-board header */
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+/* GPS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */
+ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */
+ MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000041 /* DIO2 */
+ MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000041 /* DIO2 */
+ >;
+ };
+
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19
+ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
+ >;
+ };
+
+ pinctrl_reg_usb1_en: regusb1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41
+ MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41
+ >;
+ };
+
+ pinctrl_spi2: spi2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
new file mode 100644
index 000000000000..b1e7540f0281
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw72xx.dtsi"
+
+/ {
+ model = "Gateworks Venice GW72xx-0x i.MX8MM Development Kit";
+ compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
+
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
new file mode 100644
index 000000000000..b7c91bdc21dd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ };
+
+ led-controller {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1_en>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb2_en>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg2_vbus";
+ gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+/* off-board header */
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ accelerometer@19 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ compatible = "st,lis2de12";
+ reg = <0x19>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "INT1";
+ };
+};
+
+/* off-board header */
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+/* off-board header */
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
+/* GPS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+/* RS232 */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ vbus-supply = <&reg_usb_otg2_vbus>;
+ status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */
+ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */
+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */
+ MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */
+ >;
+ };
+
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19
+ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
+ >;
+ };
+
+ pinctrl_reg_usb1_en: regusb1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41
+ MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41
+ >;
+ };
+
+ pinctrl_reg_usb2_en: regusb2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_spi2: spi2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
+ MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts
new file mode 100644
index 000000000000..6905437ff281
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw73xx.dtsi"
+
+/ {
+ model = "Gateworks Venice GW73xx-0x i.MX8MM Development Kit";
+ compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
new file mode 100644
index 000000000000..d2ffd62a3bd4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ };
+
+ led-controller {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1_en>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb2_en>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg2_vbus";
+ gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_wifi_en: regulator-wifi-en {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wl>;
+ compatible = "regulator-fixed";
+ regulator-name = "wl";
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100>;
+ enable-active-high;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+/* off-board header */
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ accelerometer@19 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ compatible = "st,lis2de12";
+ reg = <0x19>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "INT1";
+ };
+};
+
+/* off-board header */
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+/* off-board header */
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
+/* GPS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
+ cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* RS232 */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ vbus-supply = <&reg_usb_otg2_vbus>;
+ status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <&reg_wifi_en>;
+ status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */
+ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */
+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */
+ MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */
+ >;
+ };
+
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159
+ >;
+ };
+
+ pinctrl_bten: btengrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19
+ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
+ >;
+ };
+
+ pinctrl_reg_wl: regwlgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41
+ >;
+ };
+
+ pinctrl_reg_usb1_en: regusb1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41
+ MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41
+ >;
+ };
+
+ pinctrl_reg_usb2_en: regusb2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_spi2: spi2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x140
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
+ MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index c824f2615fe8..6bf1d15ba16a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -257,10 +257,12 @@
};
soc@0 {
- compatible = "simple-bus";
+ compatible = "fsl,imx8mm-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
+ nvmem-cells = <&imx8mm_uid>;
+ nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@@ -518,9 +520,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ imx8mm_uid: unique-id@410 {
+ reg = <0x4 0x8>;
+ };
+
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
+
+ fec_mac_address: mac-address@90 {
+ reg = <0x90 6>;
+ };
};
anatop: anatop@30360000 {
@@ -909,13 +919,18 @@
assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
<&clk IMX8MM_CLK_ENET_TIMER>,
<&clk IMX8MM_CLK_ENET_REF>,
- <&clk IMX8MM_CLK_ENET_TIMER>;
+ <&clk IMX8MM_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
<&clk IMX8MM_SYS_PLL2_100M>,
- <&clk IMX8MM_SYS_PLL2_125M>;
- assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+ <&clk IMX8MM_SYS_PLL2_125M>,
+ <&clk IMX8MM_SYS_PLL2_50M>;
+ assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ nvmem-cells = <&fec_mac_address>;
+ nvmem-cell-names = "mac-address";
+ nvmem_macaddr_swap;
+ fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
new file mode 100644
index 000000000000..376ca8ff7213
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "gen_led0";
+ gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-1 {
+ label = "gen_led1";
+ gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-2 {
+ label = "gen_led2";
+ gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led3>;
+ label = "heartbeat";
+ gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_audio: regulator-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_aud";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator-usb {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_otg>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ audio-cpu = <&sai3>;
+ audio-codec = <&wm8962>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ };
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_espi2>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ eeprom@0 {
+ compatible = "microchip,at25160bn", "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpha;
+ spi-cpol;
+ pagesize = <32>;
+ size = <2048>;
+ address-width = <16>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ pca6416_0: gpio@20 {
+ compatible = "nxp,pcal6416";
+ reg = <0x20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcal6414>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pca6416_1: gpio@21 {
+ compatible = "nxp,pcal6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ wm8962: audio-codec@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+ clock-names = "xclk";
+ DCVDD-supply = <&reg_audio>;
+ DBVDD-supply = <&reg_audio>;
+ AVDD-supply = <&reg_audio>;
+ CPVDD-supply = <&reg_audio>;
+ MICVDD-supply = <&reg_audio>;
+ PLLVDD-supply = <&reg_audio>;
+ SPKVDD1-supply = <&reg_audio>;
+ SPKVDD2-supply = <&reg_audio>;
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0000 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x0000 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ };
+};
+
+&easrc {
+ fsl,asrc-rate = <48000>;
+ status = "okay";
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart2 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+ assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ disable-over-current;
+ dr_mode="otg";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_espi2: espi2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82
+ MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82
+ MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82
+ MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_led3: led3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x41
+ >;
+ };
+
+ pinctrl_pcal6414: pcal6414-gpiogrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19
+ >;
+ };
+
+ pinctrl_reg_usb_otg: reg-otggrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40
+ MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x41
+ MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
new file mode 100644
index 000000000000..1392ce02587b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-beacon-som.dtsi"
+#include "imx8mn-beacon-baseboard.dtsi"
+
+/ {
+ model = "Beacon EmbeddedWorks i.MX8M Nano Development Kit";
+ compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
new file mode 100644
index 000000000000..de2cd0e3201c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &snvs_rtc;
+ spi0 = &flexspi;
+ };
+
+ usdhc1_pwrseq: usdhc1_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1_gpio>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ clocks = <&osc_32k>;
+ clock-names = "ext_clock";
+ post-power-on-delay-ms = <80>;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
+/* DDR controller is running LPDDR at 800MHz which requires 0.95V */
+&a53_opp_table {
+ opp-1200000000 {
+ opp-microvolt = <950000>;
+ };
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-800M {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ phy-supply = <&buck6_reg>;
+ phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi>;
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ buck3_reg: BUCK3 {
+ // BUCK5 in datasheet
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ // BUCK6 in datasheet
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ // BUCK7 in datasheet
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ // BUCK8 in datasheet
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "microchip,24c64", "atmel,24c64";
+ pagesize = <32>;
+ read-only; /* Manufacturing EEPROM programmed at factory */
+ reg = <0x50>;
+ };
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ clocks = <&osc_32k>;
+ max-speed = <4000000>;
+ clock-names = "extclk";
+ };
+};
+
+&usdhc1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ pm-ignore-notify;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&usdhc1_pwrseq>;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_flexspi: flexspigrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2
+ MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
+ MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
+ MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
+ MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
+ MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
+ >;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
+ MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
+ MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19
+ MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19
+ MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19
+ MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141
+ >;
+ };
+
+ pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
+ MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
+ MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
+ MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
+ MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
+ MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
+ MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
+ MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
+ MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
+ MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
+ MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+
+ pinctrl_wlan: wlangrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 76d042a4cf09..a0dddba2e561 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -46,6 +46,40 @@
pinctrl-0 = <&pinctrl_ir>;
linux,autosuspend-period = <125>;
};
+
+ wm8524: audio-codec {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8524";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_wlf>;
+ wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+ clock-names = "mclk";
+ };
+
+ sound-wm8524 {
+ compatible = "fsl,imx-audio-wm8524";
+ model = "wm8524-audio";
+ audio-cpu = <&sai3>;
+ audio-codec = <&wm8524>;
+ audio-asrc = <&easrc>;
+ audio-routing =
+ "Line Out Jack", "LINEVOUTL",
+ "Line Out Jack", "LINEVOUTR";
+ };
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif1>;
+ spdif-out;
+ spdif-in;
+ };
+};
+
+&easrc {
+ fsl,asrc-rate = <48000>;
+ status = "okay";
};
&fec1 {
@@ -124,10 +158,29 @@
};
};
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
+&spdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif1>;
+ assigned-clocks = <&clk IMX8MN_CLK_SPDIF1>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&uart2 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -210,6 +263,12 @@
>;
};
+ pinctrl_gpio_wlf: gpiowlfgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
+ >;
+ };
+
pinctrl_ir: irgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f
@@ -249,6 +308,22 @@
>;
};
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_spdif1: spdif1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
+ MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6
+ >;
+ };
+
pinctrl_typec1: typec1grp {
fsl,pins = <
MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 2a79e89f821e..16ea50089567 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -241,10 +241,12 @@
};
soc@0 {
- compatible = "simple-bus";
+ compatible = "fsl,imx8mn-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
+ nvmem-cells = <&imx8mn_uid>;
+ nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@@ -531,9 +533,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ imx8mn_uid: unique-id@410 {
+ reg = <0x4 0x8>;
+ };
+
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
+
+ fec_mac_address: mac-address@90 {
+ reg = <0x90 6>;
+ };
};
anatop: anatop@30360000 {
@@ -581,7 +591,9 @@
<&clk IMX8MN_CLK_NOC>,
<&clk IMX8MN_CLK_AUDIO_AHB>,
<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
- <&clk IMX8MN_SYS_PLL3>;
+ <&clk IMX8MN_SYS_PLL3>,
+ <&clk IMX8MN_AUDIO_PLL1>,
+ <&clk IMX8MN_AUDIO_PLL2>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
<&clk IMX8MN_ARM_PLL_OUT>,
<&clk IMX8MN_SYS_PLL3_OUT>,
@@ -589,7 +601,9 @@
assigned-clock-rates = <0>, <0>, <0>,
<400000000>,
<400000000>,
- <600000000>;
+ <600000000>,
+ <393216000>,
+ <361267200>;
};
src: reset-controller@30390000 {
@@ -875,6 +889,19 @@
status = "disabled";
};
+ flexspi: spi@30bb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,imx8mm-fspi";
+ reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_QSPI_ROOT>,
+ <&clk IMX8MN_CLK_QSPI_ROOT>;
+ clock-names = "fspi", "fspi_en";
+ status = "disabled";
+ };
+
sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
@@ -903,13 +930,18 @@
assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
<&clk IMX8MN_CLK_ENET_TIMER>,
<&clk IMX8MN_CLK_ENET_REF>,
- <&clk IMX8MN_CLK_ENET_TIMER>;
+ <&clk IMX8MN_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
<&clk IMX8MN_SYS_PLL2_100M>,
- <&clk IMX8MN_SYS_PLL2_125M>;
- assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+ <&clk IMX8MN_SYS_PLL2_125M>,
+ <&clk IMX8MN_SYS_PLL2_50M>;
+ assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ nvmem-cells = <&fec_mac_address>;
+ nvmem-cell-names = "mac-address";
+ nvmem_macaddr_swap;
+ fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
new file mode 100644
index 000000000000..0e1a6d953389
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-phycore-som.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Pollux i.MX8MP";
+ compatible = "phytec,imx8mp-phyboard-pollux-rdk",
+ "phytec,imx8mp-phycore-som", "fsl,imx8mp";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ off-on-delay-us = <12000>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ leds@62 {
+ compatible = "nxp,pca9533";
+ reg = <0x62>;
+
+ led1 {
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led2 {
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led3 {
+ type = <PCA9532_TYPE_LED>;
+ };
+ };
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+/* debug console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_usdhc2_pins: usdhc2-gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
new file mode 100644
index 000000000000..44a8c2337cee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+ model = "PHYTEC phyCORE-i.MX8MP";
+ compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp";
+
+ aliases {
+ rtc0 = &rv3028;
+ rtc1 = &snvs_rtc;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2>;
+};
+
+/* ethernet 1 */
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy1>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ enet-phy-lane-no-swap;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pmic: pmic@25 {
+ reg = <0x25>;
+ compatible = "nxp,pca9450c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-compatible = "BUCK1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-compatible = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4 {
+ regulator-compatible = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5 {
+ regulator-compatible = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-compatible = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-compatible = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2: LDO2 {
+ regulator-compatible = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3: LDO3 {
+ regulator-compatible = "LDO3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-compatible = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-compatible = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rv3028: rtc@52 {
+ compatible = "microcrystal,rv3028";
+ reg = <0x52>;
+ trickle-resistor-ohms = <3000>;
+ };
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
+ MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
+ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e3
+ MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e3
+ >;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x141
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 23f5a5e37167..f55e3f749d38 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -218,10 +218,12 @@
};
soc@0 {
- compatible = "simple-bus";
+ compatible = "fsl,imx8mp-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
+ nvmem-cells = <&imx8mp_uid>;
+ nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@@ -328,9 +330,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ imx8mp_uid: unique-id@420 {
+ reg = <0x8 0x8>;
+ };
+
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
+
+ eth_mac1: mac-address@90 {
+ reg = <0x90 6>;
+ };
};
anatop: anatop@30360000 {
@@ -762,13 +772,18 @@
assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
<&clk IMX8MP_CLK_ENET_TIMER>,
<&clk IMX8MP_CLK_ENET_REF>,
- <&clk IMX8MP_CLK_ENET_TIMER>;
+ <&clk IMX8MP_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
<&clk IMX8MP_SYS_PLL2_100M>,
- <&clk IMX8MP_SYS_PLL2_125M>;
- assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+ <&clk IMX8MP_SYS_PLL2_125M>,
+ <&clk IMX8MP_SYS_PLL2_50M>;
+ assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ nvmem-cells = <&eth_mac1>;
+ nvmem-cell-names = "mac-address";
+ fsl,stop-mode = <&gpr 0x10 3>;
+ nvmem_macaddr_swap;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index af139b283daf..dd217a0760e9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -244,11 +244,6 @@
cpu-supply = <&buck2_reg>;
};
-&clk {
- assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
- assigned-clock-rates = <786432000>, <722534400>;
-};
-
&dphy {
status = "okay";
};
@@ -298,6 +293,7 @@
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <900000>;
rohm,dvs-idle-voltage = <850000>;
@@ -319,6 +315,7 @@
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ regulator-enable-ramp-delay = <200>;
rohm,dvs-run-voltage = <900000>;
};
@@ -334,6 +331,7 @@
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
+ regulator-always-on;
};
buck6_reg: BUCK6 {
@@ -341,6 +339,7 @@
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
+ regulator-always-on;
};
buck7_reg: BUCK7 {
@@ -348,6 +347,7 @@
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
+ regulator-always-on;
};
buck8_reg: BUCK8 {
@@ -355,6 +355,7 @@
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
+ regulator-always-on;
};
ldo1_reg: LDO1 {
@@ -380,6 +381,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
+ regulator-always-on;
};
ldo4_reg: LDO4 {
@@ -387,12 +389,14 @@
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
+ regulator-always-on;
};
ldo5_reg: LDO5 {
regulator-name = "ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
ldo6_reg: LDO6 {
@@ -400,6 +404,7 @@
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
+ regulator-always-on;
};
ldo7_reg: LDO7 {
@@ -407,6 +412,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
+ regulator-always-on;
};
};
};
@@ -886,6 +892,10 @@
status = "okay";
};
+&snvs_rtc {
+ status = "disabled";
+};
+
&sai2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
index 6704ea2c72a3..0d38327043f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -10,6 +10,12 @@
compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
};
+&a53_opp_table {
+ opp-1000000000 {
+ opp-microvolt = <1000000>;
+ };
+};
+
&accel_gyro {
mount-matrix = "1", "0", "0",
"0", "1", "0",
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
new file mode 100644
index 000000000000..cbfb49aa2563
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+ model = "Purism Librem 5r4";
+ compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq";
+};
+
+&accel_gyro {
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+};
+
+&bat {
+ maxim,rsns-microohm = <1667>;
+};
+
+&bq25895 {
+ ti,battery-regulation-voltage = <4200000>; /* uV */
+ ti,charge-current = <1500000>; /* uA */
+ ti,termination-current = <144000>; /* uA */
+};
+
+&led_backlight {
+ led-max-microamp = <25000>;
+};
+
+&proximity {
+ proximity-near-level = <10>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 64fc546b110f..06a4799b6aeb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -82,6 +82,20 @@
enable-active-high;
};
+ reg_lcd_1v8: regulator-lcd-1v8 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dsien>;
+ regulator-name = "LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&reg_vdd_1v8>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ /* Otherwise i2c3 is not functional */
+ regulator-always-on;
+ };
+
reg_lcd_3v4: regulator-lcd-3v4 {
compatible = "regulator-fixed";
regulator-name = "LCD_3V4";
@@ -99,6 +113,14 @@
regulator-max-microvolt = <3300000>;
};
+ reg_vdd_1v8: regulator-vdd-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&buck7_reg>;
+ };
+
reg_vdd_3v3: regulator-vdd-3v3 {
compatible = "regulator-fixed";
regulator-name = "VDD_3V3";
@@ -106,13 +128,6 @@
regulator-max-microvolt = <3300000>;
};
- reg_vdd_1v8: regulator-vdd-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
reg_vsys_3v4: regulator-vsys-3v4 {
compatible = "regulator-fixed";
regulator-name = "VSYS_3V4";
@@ -275,7 +290,7 @@
pinctrl_charger_in: chargeringrp {
fsl,pins = <
/* CHRG_INT */
- MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x00
+ MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80
/* CHG_STATUS_B */
MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80
>;
@@ -295,6 +310,17 @@
>;
};
+ pinctrl_dsirst: dsirstgrp {
+ fsl,pins = <
+ /* DSI_RST */
+ MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x83
+ /* DSI_TE */
+ MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28 0x83
+ /* TP_RST */
+ MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x83
+ >;
+ };
+
pinctrl_ecspi1: ecspigrp {
fsl,pins = <
MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83
@@ -458,6 +484,13 @@
>;
};
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ /* TP_INT */
+ MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27 0x80
+ >;
+ };
+
pinctrl_typec: typecgrp {
fsl,pins = <
/* TYPEC_MUX_EN */
@@ -649,6 +682,7 @@
regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <900000>;
rohm,dvs-idle-voltage = <850000>;
@@ -660,6 +694,7 @@
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-idle-voltage = <900000>;
@@ -670,8 +705,8 @@
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
rohm,dvs-run-voltage = <900000>;
- regulator-always-on;
};
buck4_reg: BUCK4 {
@@ -685,6 +720,7 @@
regulator-name = "buck5";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
regulator-always-on;
};
@@ -692,6 +728,7 @@
regulator-name = "buck6";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
regulator-always-on;
};
@@ -699,6 +736,7 @@
regulator-name = "buck7";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
regulator-always-on;
};
@@ -706,6 +744,7 @@
regulator-name = "buck8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
regulator-always-on;
};
@@ -713,6 +752,7 @@
regulator-name = "ldo1";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
/* leave on for snvs power button */
regulator-always-on;
};
@@ -721,6 +761,7 @@
regulator-name = "ldo2";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
+ regulator-boot-on;
/* leave on for snvs power button */
regulator-always-on;
};
@@ -729,6 +770,7 @@
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
regulator-always-on;
};
@@ -736,6 +778,7 @@
regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
regulator-always-on;
};
@@ -752,6 +795,7 @@
regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
regulator-always-on;
};
@@ -760,6 +804,7 @@
regulator-name = "ldo7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
regulator-always-on;
};
};
@@ -796,12 +841,12 @@
compatible = "tps65132";
reg = <0x3e>;
- outp {
+ reg_lcd_avdd: outp {
regulator-name = "LCD_AVDD";
vin-supply = <&reg_lcd_3v4>;
};
- outn {
+ reg_lcd_avee: outn {
regulator-name = "LCD_AVEE";
vin-supply = <&reg_lcd_3v4>;
};
@@ -879,10 +924,13 @@
touchscreen@38 {
compatible = "edt,edt-ft5506";
reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
interrupt-parent = <&gpio1>;
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
touchscreen-size-x = <720>;
touchscreen-size-y = <1440>;
+ vcc-supply = <&reg_lcd_1v8>;
};
};
@@ -919,6 +967,45 @@
ti,use-vinmin-threshold = <1>; /* enable VINDPM */
ti,vinmin-threshold = <3900000>; /* uV */
monitored-battery = <&bat>;
+ power-supplies = <&typec_pd>;
+ };
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&mipi_dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ lcd_panel: panel@0 {
+ compatible = "mantix,mlaf057we51-x";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dsirst>;
+ avdd-supply = <&reg_lcd_avdd>;
+ avee-supply = <&reg_lcd_avee>;
+ vddi-supply = <&reg_lcd_1v8>;
+ backlight = <&backlight_dsi>;
+ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
};
};
@@ -1072,6 +1159,8 @@
};
&usdhc1 {
+ assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+ assigned-clock-rates = <400000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@@ -1084,6 +1173,8 @@
};
&usdhc2 {
+ assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
index bfad4b885905..631e01c1b9fd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -10,6 +10,56 @@
/ {
model = "ZII Ultra RMB3 Board";
compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
+
+ sound1 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "front";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound1_codec>;
+ simple-audio-card,frame-master = <&sound1_codec>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack Front";
+ simple-audio-card,routing =
+ "Headphone Jack Front", "HPA1 HPLEFT",
+ "Headphone Jack Front", "HPA1 HPRIGHT",
+ "HPA1 LEFTIN", "HPL",
+ "HPA1 RIGHTIN", "HPR";
+ simple-audio-card,aux-devs = <&hpa1>;
+
+ sound1_cpu: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ sound1_codec: simple-audio-card,codec {
+ sound-dai = <&codec1>;
+ clocks = <&cs2000>;
+ };
+ };
+
+ sound2 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "periph";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound2_codec>;
+ simple-audio-card,frame-master = <&sound2_codec>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack Back";
+ simple-audio-card,routing =
+ "Headphone Jack Back", "HPA1 HPLEFT",
+ "Headphone Jack Back", "HPA1 HPRIGHT",
+ "HPA1 LEFTIN", "HPL",
+ "HPA1 RIGHTIN", "HPR";
+ simple-audio-card,aux-devs = <&hpa2>;
+
+ sound2_cpu: simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+
+ sound2_codec: simple-audio-card,codec {
+ sound-dai = <&codec2>;
+ clocks = <&cs2000>;
+ };
+ };
};
&ecspi1 {
@@ -27,6 +77,27 @@
};
};
+&hpa2 {
+ sound-name-prefix = "HPA1";
+};
+
+&i2c1 {
+ codec2: codec@18 {
+ compatible = "ti,tlv320dac3100";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec2>;
+ reg = <0x18>;
+ #sound-dai-cells = <0>;
+ HPVDD-supply = <&reg_3p3v>;
+ SPRVDD-supply = <&reg_3p3v>;
+ SPLVDD-supply = <&reg_3p3v>;
+ AVDD-supply = <&reg_3p3v>;
+ IOVDD-supply = <&reg_3p3v>;
+ DVDD-supply = <&vgen4_reg>;
+ reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&i2c2 {
temp-sense@48 {
compatible = "national,lm75";
@@ -56,6 +127,8 @@
touchscreen-inverted-x;
touchscreen-swapped-x-y;
syna,sensor-type = <1>;
+ syna,delta-x-threshold = <5>;
+ syna,delta-y-threshold = <10>;
};
rmi4-f12@12 {
@@ -79,11 +152,23 @@
};
};
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ status = "okay";
+};
+
&usbhub {
swap-dx-lanes = <0>;
};
&iomuxc {
+ pinctrl_codec2: dac2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x41
+ >;
+ };
+
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19
@@ -92,4 +177,12 @@
MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
>;
};
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ >;
+ };
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
index 173b9e9b2bbd..f6130167a1c7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
@@ -10,6 +10,36 @@
/ {
model = "ZII Ultra Zest Board";
compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq";
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "front";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_codec>;
+ simple-audio-card,frame-master = <&sound_codec>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack Front",
+ "Headphone", "Headphone Jack Back";
+ simple-audio-card,routing =
+ "Headphone Jack Front", "HPA1 HPLEFT",
+ "Headphone Jack Front", "HPA1 HPRIGHT",
+ "Headphone Jack Back", "HPA2 HPLEFT",
+ "Headphone Jack Back", "HPA2 HPRIGHT",
+ "HPA1 LEFTIN", "HPL",
+ "HPA1 RIGHTIN", "HPR",
+ "HPA2 LEFTIN", "HPL",
+ "HPA2 RIGHTIN", "HPR";
+ simple-audio-card,aux-devs = <&hpa1>, <&hpa2>;
+
+ sound_cpu: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ sound_codec: simple-audio-card,codec {
+ sound-dai = <&codec1>;
+ clocks = <&cs2000>;
+ };
+ };
};
&i2c4 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index fa7a041ffcfd..4dc8383478ee 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -77,6 +77,15 @@
regulator-always-on;
};
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ vin-supply = <&reg_3p3_main>;
+ regulator-name = "GEN_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
reg_usdhc2_vmmc: regulator-vsd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2>;
@@ -102,6 +111,18 @@
900000 0x0>;
regulator-always-on;
};
+
+ cs2000_ref: cs2000-ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ cs2000_in_dummy: cs2000-in-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
};
&A53_0 {
@@ -283,9 +304,19 @@
reg = <0x32>;
interrupt-parent = <&gpio3>;
interrupts = <17 IRQ_TYPE_EDGE_BOTH>,
- <18 IRQ_TYPE_EDGE_BOTH>;
+ <18 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "a_det", "alert";
};
+
+ hpa2: amp@60 {
+ compatible = "ti,tpa6130a2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpa2>;
+ reg = <0x60>;
+ power-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ Vdd-supply = <&reg_5p0_main>;
+ sound-name-prefix = "HPA2";
+ };
};
&i2c2 {
@@ -378,11 +409,36 @@
};
};
+ codec1: codec@18 {
+ compatible = "ti,tlv320dac3100";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec1>;
+ reg = <0x18>;
+ #sound-dai-cells = <0>;
+ HPVDD-supply = <&reg_3p3v>;
+ SPRVDD-supply = <&reg_3p3v>;
+ SPLVDD-supply = <&reg_3p3v>;
+ AVDD-supply = <&reg_3p3v>;
+ IOVDD-supply = <&reg_3p3v>;
+ DVDD-supply = <&vgen4_reg>;
+ reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+ };
+
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
+ hpa1: amp@60 {
+ compatible = "ti,tpa6130a2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpa1>;
+ reg = <0x60>;
+ power-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ Vdd-supply = <&reg_5p0_main>;
+ sound-name-prefix = "HPA1";
+ };
+
ds1341: rtc@68 {
compatible = "dallas,ds1341";
reg = <0x68>;
@@ -407,6 +463,16 @@
compatible = "zii,rave-wdt";
reg = <0x38>;
};
+
+ cs2000: clkgen@4e {
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4e>;
+ #clock-cells = <0>;
+ clock-names = "clk_in", "ref_clk";
+ clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24000000>;
+ };
};
&i2c4 {
@@ -416,6 +482,12 @@
status = "okay";
};
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -468,6 +540,7 @@
&usb_dwc3_0 {
dr_mode = "host";
+ maximum-speed = "high-speed";
status = "okay";
};
@@ -478,6 +551,7 @@
&usb_dwc3_1 {
dr_mode = "host";
+ maximum-speed = "high-speed";
status = "okay";
};
@@ -551,6 +625,12 @@
>;
};
+ pinctrl_codec1: dac1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x41
+ >;
+ };
+
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
@@ -583,29 +663,29 @@
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
- MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000022
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000a2
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
- MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
- MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
+ MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000022
+ MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000a2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
- MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
+ MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000022
+ MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000a2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
- MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f
- MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f
+ MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000022
+ MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x400000a2
>;
};
@@ -642,12 +722,32 @@
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ >;
+ };
+
pinctrl_switch_irq: switchgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
>;
};
+ pinctrl_tpa1: tpa6130-1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x41
+ >;
+ };
+
+ pinctrl_tpa2: tpa6130-2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41
+ >;
+ };
+
pinctrl_ts: tsgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x96
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index a841a023e8e0..17c449e12c2e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -11,6 +11,7 @@
#include "dt-bindings/input/input.h"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/imx8mq.h>
#include "imx8mq-pinfunc.h"
/ {
@@ -286,11 +287,13 @@
};
soc@0 {
- compatible = "simple-bus";
+ compatible = "fsl,imx8mq-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+ nvmem-cells = <&imx8mq_uid>;
+ nvmem-cell-names = "soc_unique_id";
bus@30000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
@@ -522,6 +525,8 @@
<&clk IMX8MQ_VIDEO_PLL1>,
<&clk IMX8MQ_VIDEO_PLL1_OUT>;
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+ interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
+ interconnect-names = "dram";
status = "disabled";
port@0 {
@@ -555,9 +560,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ imx8mq_uid: soc-uid@410 {
+ reg = <0x4 0x8>;
+ };
+
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
+
+ fec_mac_address: mac-address@90 {
+ reg = <0x90 6>;
+ };
};
anatop: syscon@30360000 {
@@ -826,6 +839,8 @@
clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
<&clk IMX8MQ_CLK_ECSPI1_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -838,6 +853,8 @@
clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
<&clk IMX8MQ_CLK_ECSPI2_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -850,6 +867,8 @@
clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
<&clk IMX8MQ_CLK_ECSPI3_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -1016,9 +1035,14 @@
reg = <0x30a00300 0x100>;
clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
clock-names = "phy_ref";
- assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
- assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
- assigned-clock-rates = <24000000>;
+ assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+ <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+ <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+ <&clk IMX8MQ_VIDEO_PLL1>;
+ assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
+ <&clk IMX8MQ_VIDEO_PLL1>,
+ <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+ assigned-clock-rates = <0>, <0>, <24000000>, <594000000>;
#phy-cells = <0>;
power-domains = <&pgc_mipi>;
status = "disabled";
@@ -1152,12 +1176,50 @@
<&clk IMX8MQ_CLK_ENET_PHY_REF>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
+ assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>,
+ <&clk IMX8MQ_CLK_ENET_TIMER>,
+ <&clk IMX8MQ_CLK_ENET_REF>,
+ <&clk IMX8MQ_CLK_ENET_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+ <&clk IMX8MQ_SYS2_PLL_100M>,
+ <&clk IMX8MQ_SYS2_PLL_125M>,
+ <&clk IMX8MQ_SYS2_PLL_50M>;
+ assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ nvmem-cells = <&fec_mac_address>;
+ nvmem-cell-names = "mac-address";
+ nvmem_macaddr_swap;
+ fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
status = "disabled";
};
};
+ noc: interconnect@32700000 {
+ compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
+ reg = <0x32700000 0x100000>;
+ clocks = <&clk IMX8MQ_CLK_NOC>;
+ fsl,ddrc = <&ddrc>;
+ #interconnect-cells = <1>;
+ operating-points-v2 = <&noc_opp_table>;
+
+ noc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-133M {
+ opp-hz = /bits/ 64 <133333333>;
+ };
+
+ opp-400M {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+
+ opp-800M {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ };
+ };
+
bus@32c00000 { /* AIPS4 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
@@ -1315,6 +1377,7 @@
<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
fsl,max-link-speed = <2>;
+ linux,pci-domain = <0>;
power-domains = <&pgc_pcie>;
resets = <&src IMX8MQ_RESET_PCIEPHY>,
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
@@ -1344,6 +1407,7 @@
<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
fsl,max-link-speed = <2>;
+ linux,pci-domain = <1>;
power-domains = <&pgc_pcie>;
resets = <&src IMX8MQ_RESET_PCIEPHY2>,
<&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index 4338db14c5da..ae1c2abaaf36 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -6,6 +6,8 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+
fman0: fman@1a00000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -15,7 +17,7 @@ fman0: fman@1a00000 {
reg = <0x0 0x1a00000 0x0 0xfe000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 3 0>;
+ clocks = <&clockgen QORIQ_CLK_FMAN 0>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
ptimer-handle = <&ptp_timer0>;
@@ -81,6 +83,6 @@ ptp_timer0: ptp-timer@1afe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x0 0x1afe000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 3 0>;
+ clocks = <&clockgen QORIQ_CLK_FMAN 0>;
fsl,extts-fifo;
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 49c19c6879f9..cab89dc6f596 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1113,7 +1113,7 @@
thermal-zones {
- cls0: cls0 {
+ cls0: cls0-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
sustainable-power = <4500>;
@@ -1122,13 +1122,13 @@
thermal-sensors = <&tsensor 1>;
trips {
- threshold: trip-point@0 {
+ threshold: trip-point0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
- target: trip-point@1 {
+ target: trip-point1 {
temperature = <75000>;
hysteresis = <1000>;
type = "passive";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 85b0dfb35d6d..8830795c8efc 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -194,6 +194,12 @@
#clock-cells = <1>;
};
+ iomcu_rst: reset {
+ compatible = "hisilicon,hi3660-reset";
+ hisi,rst-syscon = <&iomcu>;
+ #reset-cells = <2>;
+ };
+
uart0: serial@fdf02000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf02000 0x0 0x1000>;
@@ -708,5 +714,76 @@
card-detect-delay = <200>;
status = "disabled";
};
+
+ /* I2C */
+ i2c0: i2c@ffd71000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xffd71000 0x0 0x1000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&iomcu HI3670_CLK_GATE_I2C0>;
+ resets = <&iomcu_rst 0x20 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffd72000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xffd72000 0x0 0x1000>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&iomcu HI3670_CLK_GATE_I2C1>;
+ resets = <&iomcu_rst 0x20 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffd73000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xffd73000 0x0 0x1000>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&iomcu HI3670_CLK_GATE_I2C2>;
+ resets = <&iomcu_rst 0x20 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@fdf0c000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xfdf0c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_I2C3>;
+ resets = <&crg_rst 0x78 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@fdf0d000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xfdf0d000 0x0 0x1000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_I2C4>;
+ resets = <&crg_rst 0x78 27>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index 81d09434c5c6..a83b9d4f172e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -113,7 +113,7 @@
#size-cells = <1>;
ranges = <0x0 0x8a20000 0x1000>;
- usb2_phy1: usb2-phy@120 {
+ usb2_phy1: usb2_phy@120 {
compatible = "hisilicon,hi3798cv200-usb2-phy";
reg = <0x120 0x4>;
clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
@@ -134,7 +134,7 @@
};
};
- usb2_phy2: usb2-phy@124 {
+ usb2_phy2: usb2_phy@124 {
compatible = "hisilicon,hi3798cv200-usb2-phy";
reg = <0x124 0x4>;
clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
@@ -565,8 +565,8 @@
device_type = "pci";
bus-range = <0x00 0xff>;
num-lanes = <1>;
- ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
- 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
+ ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000>,
+ <0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index c6580c9f068e..d426c6c8722b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -872,7 +872,7 @@
thermal-zones {
- cls0: cls0 {
+ cls0: cls0-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
sustainable-power = <3326>;
@@ -881,13 +881,13 @@
thermal-sensors = <&tsensor 2>;
trips {
- threshold: trip-point@0 {
+ threshold: trip-point0 {
temperature = <65000>;
hysteresis = <0>;
type = "passive";
};
- target: trip-point@1 {
+ target: trip-point1 {
temperature = <75000>;
hysteresis = <0>;
type = "passive";
@@ -1053,7 +1053,7 @@
"ppmmu3";
clocks = <&media_ctrl HI6220_G3D_CLK>,
<&media_ctrl HI6220_G3D_PCLK>;
- clock-names = "core", "bus";
+ clock-names = "bus", "core";
assigned-clocks = <&media_ctrl HI6220_G3D_CLK>,
<&media_ctrl HI6220_G3D_PCLK>;
assigned-clock-rates = <500000000>, <144000000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
index d456b0aa6f58..77bd8c3a8314 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
@@ -61,6 +61,153 @@
0x060 MUX_M1 /* UART6_TXD */
>;
};
+
+ i2c3_pmx_func: i2c3_pmx_func {
+ pinctrl-single,pins = <
+ 0x010 MUX_M1 /* I2C3_SCL */
+ 0x014 MUX_M1 /* I2C3_SDA */
+ >;
+ };
+
+ i2c4_pmx_func: i2c4_pmx_func {
+ pinctrl-single,pins = <
+ 0x03c MUX_M1 /* I2C4_SCL */
+ 0x040 MUX_M1 /* I2C4_SDA */
+ >;
+ };
+
+ cam0_rst_pmx_func: cam0_rst_pmx_func {
+ pinctrl-single,pins = <
+ 0x714 MUX_M0 /* CAM0_RST */
+ >;
+ };
+
+ cam1_rst_pmx_func: cam1_rst_pmx_func {
+ pinctrl-single,pins = <
+ 0x048 MUX_M0 /* CAM1_RST */
+ >;
+ };
+
+ cam0_pwd_n_pmx_func: cam0_pwd_n_pmx_func {
+ pinctrl-single,pins = <
+ 0x098 MUX_M0 /* CAM0_PWD_N */
+ >;
+ };
+
+ cam1_pwd_n_pmx_func: cam1_pwd_n_pmx_func {
+ pinctrl-single,pins = <
+ 0x044 MUX_M0 /* CAM1_PWD_N */
+ >;
+ };
+
+ isp0_pmx_func: isp0_pmx_func {
+ pinctrl-single,pins = <
+ 0x018 MUX_M1 /* ISP_CLK0 */
+ 0x024 MUX_M1 /* ISP_SCL0 */
+ 0x028 MUX_M1 /* ISP_SDA0 */
+ >;
+ };
+
+ isp1_pmx_func: isp1_pmx_func {
+ pinctrl-single,pins = <
+ 0x01c MUX_M1 /* ISP_CLK1 */
+ 0x02c MUX_M1 /* ISP_SCL1 */
+ 0x030 MUX_M1 /* ISP_SDA1 */
+ >;
+ };
+ };
+
+ pmx1: pinmux@fff11000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xfff11000 0x0 0x73c>;
+ #gpio-range-cells = <0x3>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <0x7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 46 0>;
+
+ pwr_key_pmx_func: pwr_key_pmx_func {
+ pinctrl-single,pins = <
+ 0x064 MUX_M0 /* GPIO_203 */
+ >;
+ };
+
+ pd_pmx_func: pd_pmx_func{
+ pinctrl-single,pins = <
+ 0x080 MUX_M0 /* GPIO_221 */
+ >;
+ };
+
+ i2s2_pmx_func: i2s2_pmx_func {
+ pinctrl-single,pins = <
+ 0x050 MUX_M1 /* I2S2_DI */
+ 0x054 MUX_M1 /* I2S2_DO */
+ 0x058 MUX_M1 /* I2S2_XCLK */
+ 0x05c MUX_M1 /* I2S2_XFS */
+ >;
+ };
+
+ spi0_pmx_func: spi0_pmx_func {
+ pinctrl-single,pins = <
+ 0x094 MUX_M1 /* SPI0_CLK */
+ 0x098 MUX_M1 /* SPI0_DI */
+ 0x09c MUX_M1 /* SPI0_DO */
+ 0x0a0 MUX_M1 /* SPI0_CS0_N */
+ >;
+ };
+
+ spi2_pmx_func: spi2_pmx_func {
+ pinctrl-single,pins = <
+ 0x710 MUX_M1 /* SPI2_CLK */
+ 0x714 MUX_M1 /* SPI2_DI */
+ 0x718 MUX_M1 /* SPI2_DO */
+ 0x71c MUX_M1 /* SPI2_CS0_N */
+ >;
+ };
+
+ spi3_pmx_func: spi3_pmx_func {
+ pinctrl-single,pins = <
+ 0x72c MUX_M1 /* SPI3_CLK */
+ 0x730 MUX_M1 /* SPI3_DI */
+ 0x734 MUX_M1 /* SPI3_DO */
+ 0x738 MUX_M1 /* SPI3_CS0_N */
+ >;
+ };
+
+ i2c0_pmx_func: i2c0_pmx_func {
+ pinctrl-single,pins = <
+ 0x020 MUX_M1 /* I2C0_SCL */
+ 0x024 MUX_M1 /* I2C0_SDA */
+ >;
+ };
+
+ i2c1_pmx_func: i2c1_pmx_func {
+ pinctrl-single,pins = <
+ 0x028 MUX_M1 /* I2C1_SCL */
+ 0x02c MUX_M1 /* I2C1_SDA */
+ >;
+ };
+ i2c2_pmx_func: i2c2_pmx_func {
+ pinctrl-single,pins = <
+ 0x030 MUX_M1 /* I2C2_SCL */
+ 0x034 MUX_M1 /* I2C2_SDA */
+ >;
+ };
+
+ pcie_clkreq_pmx_func: pcie_clkreq_pmx_func {
+ pinctrl-single,pins = <
+ 0x084 MUX_M1 /* PCIE0_CLKREQ_N */
+ >;
+ };
+
+ gpio185_pmx_func: gpio185_pmx_func {
+ pinctrl-single,pins = <0x01C 0x1>;
+ };
+
+ gpio185_pmx_idle: gpio185_pmx_idle {
+ pinctrl-single,pins = <0x01C 0x0>;
+ };
};
pmx2: pinmux@e896c800 {
@@ -184,6 +331,180 @@
DRIVE7_02MA DRIVE6_MASK
>;
};
+
+ i2c3_cfg_func: i2c3_cfg_func {
+ pinctrl-single,pins = <
+ 0x014 0x0 /* I2C3_SCL */
+ 0x018 0x0 /* I2C3_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ i2c4_cfg_func: i2c4_cfg_func {
+ pinctrl-single,pins = <
+ 0x040 0x0 /* I2C4_SCL */
+ 0x044 0x0 /* I2C4_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ cam0_rst_cfg_func: cam0_rst_cfg_func {
+ pinctrl-single,pins = <
+ 0x714 0x0 /* CAM0_RST */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ cam1_rst_cfg_func: cam1_rst_cfg_func {
+ pinctrl-single,pins = <
+ 0x04C 0x0 /* CAM1_RST */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ cam0_pwd_n_cfg_func: cam0_pwd_n_cfg_func {
+ pinctrl-single,pins = <
+ 0x09C 0x0 /* CAM0_PWD_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ cam1_pwd_n_cfg_func: cam1_pwd_n_cfg_func {
+ pinctrl-single,pins = <
+ 0x048 0x0 /* CAM1_PWD_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ isp0_cfg_func: isp0_cfg_func {
+ pinctrl-single,pins = <
+ 0x01C 0x0 /* ISP_CLK0 */
+ 0x028 0x0 /* ISP_SCL0 */
+ 0x02C 0x0 /* ISP_SDA0 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ isp1_cfg_func: isp1_cfg_func {
+ pinctrl-single,pins = <
+ 0x020 0x0 /* ISP_CLK1 */
+ 0x030 0x0 /* ISP_SCL1 */
+ 0x034 0x0 /* ISP_SDA1 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
};
pmx5: pinmux@fc182000 {
@@ -338,22 +659,311 @@
};
};
- pmx1: pinmux@fff11000 {
- compatible = "pinctrl-single";
- reg = <0x0 0xfff11000 0x0 0x73c>;
- #gpio-range-cells = <0x3>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <0x20>;
- pinctrl-single,function-mask = <0x7>;
- /* pin base, nr pins & gpio function */
- pinctrl-single,gpio-range = <&range 0 46 0>;
- };
-
pmx16: pinmux@fff11800 {
compatible = "pinconf-single";
reg = <0x0 0xfff11800 0x0 0x73c>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <0x20>;
+
+ pwr_key_cfg_func: pwr_key_cfg_func {
+ pinctrl-single,pins = <
+ 0x090 0x0 /* GPIO_203 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ usb_cfg_func: usb_cfg_func {
+ pinctrl-single,pins = <
+ 0x0AC 0x0 /* GPIO_221 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ spi0_cfg_func: spi0_cfg_func {
+ pinctrl-single,pins = <
+ 0x0c8 0x0 /* SPI0_DI */
+ 0x0cc 0x0 /* SPI0_DO */
+ 0x0d0 0x0 /* SPI0_CS0_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_06MA DRIVE6_MASK
+ >;
+ };
+
+ spi2_cfg_func: spi2_cfg_func {
+ pinctrl-single,pins = <
+ 0x714 0x0 /* SPI2_DI */
+ 0x718 0x0 /* SPI2_DO */
+ 0x71c 0x0 /* SPI2_CS0_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_06MA DRIVE6_MASK
+ >;
+ };
+
+ spi3_cfg_func: spi3_cfg_func {
+ pinctrl-single,pins = <
+ 0x730 0x0 /* SPI3_DI */
+ 0x734 0x0 /* SPI3_DO */
+ 0x738 0x0 /* SPI3_CS0_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_06MA DRIVE6_MASK
+ >;
+ };
+
+ spi0_clk_cfg_func: spi0_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x0c4 0x0 /* SPI0_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_10MA DRIVE6_MASK
+ >;
+ };
+
+ spi2_clk_cfg_func: spi2_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x710 0x0 /* SPI2_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_10MA DRIVE6_MASK
+ >;
+ };
+
+ spi3_clk_cfg_func: spi3_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x72c 0x0 /* SPI3_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_10MA DRIVE6_MASK
+ >;
+ };
+
+ i2c0_cfg_func: i2c0_cfg_func {
+ pinctrl-single,pins = <
+ 0x04c 0x0 /* I2C0_SCL */
+ 0x050 0x0 /* I2C0_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ i2c1_cfg_func: i2c1_cfg_func {
+ pinctrl-single,pins = <
+ 0x054 0x0 /* I2C1_SCL */
+ 0x058 0x0 /* I2C1_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ i2c2_cfg_func: i2c2_cfg_func {
+ pinctrl-single,pins = <
+ 0x05c 0x0 /* I2C2_SCL */
+ 0x060 0x0 /* I2C2_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ pcie_clkreq_cfg_func: pcie_clkreq_cfg_func {
+ pinctrl-single,pins = <
+ 0x0b0 0x0
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_06MA DRIVE6_MASK
+ >;
+ };
+ i2s2_cfg_func: i2s2_cfg_func {
+ pinctrl-single,pins = <
+ 0x07c 0x0 /* I2S2_DI */
+ 0x080 0x0 /* I2S2_DO */
+ 0x084 0x0 /* I2S2_XCLK */
+ 0x088 0x0 /* I2S2_XFS */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ gpio185_cfg_func: gpio185_cfg_func {
+ pinctrl-single,pins = <0x048 0>;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x00 0x70>;
+ pinctrl-single,slew-rate = <0x0 0x80>;
+ };
+
+ gpio185_cfg_idle: gpio185_cfg_idle {
+ pinctrl-single,pins = <0x048 0>;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x00 0x70>;
+ pinctrl-single,slew-rate = <0x0 0x80>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index 405acaa3e9dd..4aed8d440b3a 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -318,7 +318,7 @@
status = "disabled";
};
- lbc: localbus@80380000 {
+ lbc: local-bus@80380000 {
compatible = "hisilicon,hisi-localbus", "simple-bus";
reg = <0x0 0x80380000 0x0 0x10000>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index 7980709e21ff..7deca5f763d5 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -335,7 +335,6 @@
reg = <0x0 0xa0040000 0x0 0x20000>;
#iommu-cells = <1>;
dma-coherent;
- smmu-cb-memtype = <0x0 0x1>;
hisilicon,broken-prefetch-cmd;
status = "disabled";
};
@@ -737,9 +736,8 @@
#size-cells = <2>;
device_type = "pci";
dma-coherent;
- ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0
- 0x5ff0000 0x01000000 0 0 0 0xb7ff0000
- 0 0x10000>;
+ ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000>,
+ <0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 7832d9cdec21..2172d8071181 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -1166,7 +1166,6 @@
reg = <0x0 0xa0040000 0x0 0x20000>;
#iommu-cells = <1>;
dma-coherent;
- smmu-cb-memtype = <0x0 0x1>;
hisilicon,broken-prefetch-cmd;
status = "disabled";
};
@@ -1181,7 +1180,6 @@
#iommu-cells = <1>;
dma-coherent;
hisilicon,broken-prefetch-cmd;
- /* smmu-cb-memtype = <0x0 0x1>;*/
};
p0_smmu_alg_b: iommu@8d0040000 {
compatible = "arm,smmu-v3";
@@ -1194,7 +1192,6 @@
#iommu-cells = <1>;
dma-coherent;
hisilicon,broken-prefetch-cmd;
- /* smmu-cb-memtype = <0x0 0x1>;*/
};
p1_smmu_alg_a: iommu@400d0040000 {
compatible = "arm,smmu-v3";
@@ -1207,7 +1204,6 @@
#iommu-cells = <1>;
dma-coherent;
hisilicon,broken-prefetch-cmd;
- /* smmu-cb-memtype = <0x0 0x1>;*/
};
p1_smmu_alg_b: iommu@408d0040000 {
compatible = "arm,smmu-v3";
@@ -1220,7 +1216,6 @@
#iommu-cells = <1>;
dma-coherent;
hisilicon,broken-prefetch-cmd;
- /* smmu-cb-memtype = <0x0 0x1>;*/
};
soc {
@@ -1708,8 +1703,8 @@
#size-cells = <2>;
device_type = "pci";
dma-coherent;
- ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000
- 0x01000000 0 0 0 0xaf7f0000 0 0x10000>;
+ ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000>,
+ <0x01000000 0 0 0 0xaf7f0000 0 0x10000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 296eceec4276..3a052540605b 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -2,3 +2,4 @@
dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
socfpga_agilex_socdk_nand.dtb
dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
+dtb-$(CONFIG_ARCH_N5X) += socfpga_n5x_socdk.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
new file mode 100644
index 000000000000..5f56e2697fee
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+ model = "eASIC N5X SoCDK";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ soc {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+};
+
+&clkmgr {
+ compatible = "intel,easic-n5x-clkmgr";
+};
+
+&mmc {
+ status = "okay";
+ cap-sd-highspeed;
+ broken-cd;
+ bus-width = <4>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index daffe136c523..5fc613d24151 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -67,8 +67,6 @@
/* J6 */
&sata {
status = "okay";
- phys = <&comphy2 0>;
- phy-names = "sata-phy";
};
/* U11 */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index f5ec3b644769..d239ab70ed99 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -205,7 +205,7 @@
};
partition@20000 {
- label = "u-boot";
+ label = "a53-firmware";
reg = <0x20000 0x160000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index d5b6c0a1c54a..7a2df148c6a3 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -458,6 +458,8 @@
reg = <0xe0000 0x178>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&nb_periph_clk 1>;
+ phys = <&comphy2 0>;
+ phy-names = "sata-phy";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
index 623010f3ca89..d9bbbfa4b4eb 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
@@ -27,3 +27,8 @@
#clock-cells = <1>;
};
};
+
+&ap_sdhci0 {
+ compatible = "marvell,armada-ap807-sdhci";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 12e477f1aeb9..6614472100c2 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -281,6 +281,9 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&ap_pinctrl 0 0 20>;
+ marvell,pwm-offset = <0x10c0>;
+ #pwm-cells = <2>;
+ clocks = <&ap_clk 3>;
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 7c329e173a6d..64179a372ecf 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -234,12 +234,17 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
+ marvell,pwm-offset = <0x1f0>;
+ #pwm-cells = <2>;
interrupt-controller;
interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
<85 IRQ_TYPE_LEVEL_HIGH>,
<84 IRQ_TYPE_LEVEL_HIGH>,
<83 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
@@ -250,12 +255,17 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
+ marvell,pwm-offset = <0x1f0>;
+ #pwm-cells = <2>;
interrupt-controller;
interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
<81 IRQ_TYPE_LEVEL_HIGH>,
<80 IRQ_TYPE_LEVEL_HIGH>,
<79 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
+ clock-names = "core", "axi";
+ clocks = <&CP11X_LABEL(clk) 1 21>,
+ <&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts
index ce49a70d88a0..79020e6d2792 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dts
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts
@@ -113,6 +113,8 @@
&ap_sdhci0 {
pinctrl-names = "default";
bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
vqmmc-supply = <&ap0_reg_sd_vccq>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 18f7b46c4095..deba27ab7657 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 370f309d32de..9bdf5145966c 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -189,6 +189,23 @@
#clock-cells = <1>;
};
+ pwrap: pwrap@1000d000 {
+ compatible = "mediatek,mt6779-pwrap";
+ reg = <0 0x1000d000 0 0x1000>;
+ reg-names = "pwrap";
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_PMIC_AP>;
+ clock-names = "spi", "wrap";
+ };
+
+ devapc: devapc@10207000 {
+ compatible = "mediatek,mt6779-devapc";
+ reg = <0 0x10207000 0 0x1000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>;
+ clock-names = "devapc-infra-clock";
+ };
+
uart0: serial@11002000 {
compatible = "mediatek,mt6779-uart",
"mediatek,mt6577-uart";
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 5b9ec032ce8d..7c6d871538a6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -698,6 +698,8 @@
clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
<&topckgen CLK_TOP_AXI_SEL>;
clock-names = "source", "hclk";
+ resets = <&pericfg MT7622_PERI_MSDC1_SW_RST>;
+ reset-names = "hrst";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index cba2d8933e79..3249c959f76f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -344,6 +344,12 @@
bias-disable;
};
};
+
+ pwm_pins_1: pwm1 {
+ pins_pwm {
+ pinmux = <PINMUX_GPIO90__FUNC_PWM_A>;
+ };
+ };
};
&spi0 {
@@ -392,3 +398,9 @@
&uart0 {
status = "okay";
};
+
+&pwm1 {
+ status = "okay";
+ pinctrl-0 = <&pwm_pins_1>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
new file mode 100644
index 000000000000..fb5ee91b6fe0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku0.
+ *
+ * SKU is a 8-bit value (0x00 == 0):
+ * - Bits 7..4: Panel ID: 0x0 (AUO)
+ * - Bits 3..0: SKU ID: 0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+ model = "MediaTek krane sku0 board";
+ compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
+};
+
+&panel {
+ status = "okay";
+ compatible = "auo,kd101n80-45na";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
index 47113e275cb5..721d16f9c3b4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -16,3 +16,8 @@
model = "MediaTek krane sku176 board";
compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
};
+
+&panel {
+ status = "okay";
+ compatible = "boe,tv101wum-nl6";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd3..ff56bcfa3370 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,36 @@
proc-supply = <&mt6358_vproc11_reg>;
};
+&dsi0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel: panel@0 {
+ /* compatible will be set in board dts */
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pins_default>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ port {
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@@ -290,6 +320,10 @@
clock-frequency = <100000>;
};
+&mipi_tx0 {
+ status = "okay";
+};
+
&mmc0 {
status = "okay";
pinctrl-names = "default", "state_uhs";
@@ -547,6 +581,14 @@
};
};
+ panel_pins_default: panel_pins_default {
+ panel_reset {
+ pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
+ output-low;
+ bias-pull-up;
+ };
+ };
+
pwm0_pin_default: pwm0_pin_default {
pins1 {
pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
@@ -709,6 +751,10 @@
};
};
+&mfg {
+ domain-supply = <&mt6358_vgpu_reg>;
+};
+
&soc_data {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 5b782a4769e7..80519a145f13 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -6,7 +6,7 @@
*/
#include <dt-bindings/clock/mt8183-clk.h>
-#include <dt-bindings/gce/mt8173-gce.h>
+#include <dt-bindings/gce/mt8183-gce.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/memory/mt8183-larb-port.h>
@@ -360,7 +360,7 @@
#size-cells = <0>;
#power-domain-cells = <1>;
- power-domain@MT8183_POWER_DOMAIN_MFG {
+ mfg: power-domain@MT8183_POWER_DOMAIN_MFG {
reg = <MT8183_POWER_DOMAIN_MFG>;
#address-cells = <1>;
#size-cells = <0>;
@@ -661,12 +661,27 @@
compatible = "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
#pwm-cells = <2>;
clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>,
<&infracfg CLK_INFRA_DISP_PWM>;
clock-names = "main", "mm";
};
+ pwm1: pwm@11006000 {
+ compatible = "mediatek,mt8183-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&infracfg CLK_INFRA_PWM>,
+ <&infracfg CLK_INFRA_PWM_HCLK>,
+ <&infracfg CLK_INFRA_PWM1>,
+ <&infracfg CLK_INFRA_PWM2>,
+ <&infracfg CLK_INFRA_PWM3>,
+ <&infracfg CLK_INFRA_PWM4>;
+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+ "pwm4";
+ };
+
i2c3: i2c@1100f000 {
compatible = "mediatek,mt8183-i2c";
reg = <0 0x1100f000 0 0x1000>,
@@ -1011,7 +1026,7 @@
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
mediatek,larb = <&larb0>;
- mediatek,rdma_fifo_size = <5120>;
+ mediatek,rdma-fifo-size = <5120>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
};
@@ -1023,7 +1038,7 @@
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
mediatek,larb = <&larb0>;
- mediatek,rdma_fifo_size = <2048>;
+ mediatek,rdma-fifo-size = <2048>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
};
@@ -1055,8 +1070,7 @@
};
gamma0: gamma@14011000 {
- compatible = "mediatek,mt8183-disp-gamma",
- "mediatek,mt8173-disp-gamma";
+ compatible = "mediatek,mt8183-disp-gamma";
reg = <0 0x14011000 0 0x1000>;
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index e12e024de122..9757138a8bbd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -39,6 +39,7 @@
reg = <0x000>;
enable-method = "psci";
clock-frequency = <1701000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
};
@@ -49,6 +50,7 @@
reg = <0x100>;
enable-method = "psci";
clock-frequency = <1701000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
};
@@ -59,6 +61,7 @@
reg = <0x200>;
enable-method = "psci";
clock-frequency = <1701000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
};
@@ -69,6 +72,7 @@
reg = <0x300>;
enable-method = "psci";
clock-frequency = <1701000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
};
@@ -79,6 +83,7 @@
reg = <0x400>;
enable-method = "psci";
clock-frequency = <2171000000>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
};
@@ -89,6 +94,7 @@
reg = <0x500>;
enable-method = "psci";
clock-frequency = <2171000000>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
};
@@ -99,6 +105,7 @@
reg = <0x600>;
enable-method = "psci";
clock-frequency = <2171000000>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
};
@@ -109,6 +116,7 @@
reg = <0x700>;
enable-method = "psci";
clock-frequency = <2171000000>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
};
@@ -158,6 +166,42 @@
l3_0: l3-cache {
compatible = "cache";
};
+
+ idle-states {
+ entry-method = "arm,psci";
+ cpuoff_l: cpuoff_l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <55>;
+ exit-latency-us = <140>;
+ min-residency-us = <780>;
+ };
+ cpuoff_b: cpuoff_b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <35>;
+ exit-latency-us = <145>;
+ min-residency-us = <720>;
+ };
+ clusteroff_l: clusteroff_l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <60>;
+ exit-latency-us = <155>;
+ min-residency-us = <860>;
+ };
+ clusteroff_b: clusteroff_b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <40>;
+ exit-latency-us = <155>;
+ min-residency-us = <780>;
+ };
+ };
};
pmu-a55 {
@@ -379,6 +423,19 @@
status = "disabled";
};
+ nor_flash: spi@11234000 {
+ compatible = "mediatek,mt8192-nor";
+ reg = <0 0x11234000 0 0xe0>;
+ interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>,
+ <&clk26m>,
+ <&clk26m>;
+ clock-names = "spi", "sf", "axi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
i2c3: i2c3@11cb0000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11cb0000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index e6e4d9d60094..b80e95574bef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -276,6 +276,27 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ apdma: dma-controller@11000480 {
+ compatible = "mediatek,mt8516-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000480 0 0x80>,
+ <0 0x11000500 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>,
+ <0 0x11000980 0 0x80>,
+ <0 0x11000a00 0 0x80>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_LOW>;
+ dma-requests = <6>;
+ clocks = <&topckgen CLK_TOP_APDMA>;
+ clock-names = "apdma";
+ #dma-cells = <1>;
+ };
+
uart0: serial@11005000 {
compatible = "mediatek,mt8516-uart",
"mediatek,mt6577-uart";
@@ -284,6 +305,9 @@
clocks = <&topckgen CLK_TOP_UART0_SEL>,
<&topckgen CLK_TOP_UART0>;
clock-names = "baud", "bus";
+ dmas = <&apdma 0
+ &apdma 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -295,6 +319,9 @@
clocks = <&topckgen CLK_TOP_UART1_SEL>,
<&topckgen CLK_TOP_UART1>;
clock-names = "baud", "bus";
+ dmas = <&apdma 2
+ &apdma 3>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -306,6 +333,9 @@
clocks = <&topckgen CLK_TOP_UART2_SEL>,
<&topckgen CLK_TOP_UART2>;
clock-names = "baud", "bus";
+ dmas = <&apdma 4
+ &apdma 5>;
+ dma-names = "tx", "rx";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 9296d12d11e9..e13fb1070472 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -9,4 +9,5 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 6fd2e0542c27..9f5f5e1fa82e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -10,6 +10,725 @@
model = "NVIDIA Jetson TX2 Developer Kit";
compatible = "nvidia,p2771-0000", "nvidia,tegra186";
+ aconnect {
+ status = "okay";
+
+ dma-controller@2930000 {
+ status = "okay";
+ };
+
+ interrupt-controller@2a40000 {
+ status = "okay";
+ };
+
+ ahub@2900800 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ xbar_admaif0_ep: endpoint {
+ remote-endpoint = <&admaif0_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+
+ xbar_admaif1_ep: endpoint {
+ remote-endpoint = <&admaif1_ep>;
+ };
+ };
+
+ port@2 {
+ reg = <0x2>;
+
+ xbar_admaif2_ep: endpoint {
+ remote-endpoint = <&admaif2_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <0x3>;
+
+ xbar_admaif3_ep: endpoint {
+ remote-endpoint = <&admaif3_ep>;
+ };
+ };
+
+ port@4 {
+ reg = <0x4>;
+
+ xbar_admaif4_ep: endpoint {
+ remote-endpoint = <&admaif4_ep>;
+ };
+ };
+
+ port@5 {
+ reg = <0x5>;
+
+ xbar_admaif5_ep: endpoint {
+ remote-endpoint = <&admaif5_ep>;
+ };
+ };
+
+ port@6 {
+ reg = <0x6>;
+
+ xbar_admaif6_ep: endpoint {
+ remote-endpoint = <&admaif6_ep>;
+ };
+ };
+
+ port@7 {
+ reg = <0x7>;
+
+ xbar_admaif7_ep: endpoint {
+ remote-endpoint = <&admaif7_ep>;
+ };
+ };
+
+ port@8 {
+ reg = <0x8>;
+
+ xbar_admaif8_ep: endpoint {
+ remote-endpoint = <&admaif8_ep>;
+ };
+ };
+
+ port@9 {
+ reg = <0x9>;
+
+ xbar_admaif9_ep: endpoint {
+ remote-endpoint = <&admaif9_ep>;
+ };
+ };
+
+ port@a {
+ reg = <0xa>;
+
+ xbar_admaif10_ep: endpoint {
+ remote-endpoint = <&admaif10_ep>;
+ };
+ };
+
+ port@b {
+ reg = <0xb>;
+
+ xbar_admaif11_ep: endpoint {
+ remote-endpoint = <&admaif11_ep>;
+ };
+ };
+
+ port@c {
+ reg = <0xc>;
+
+ xbar_admaif12_ep: endpoint {
+ remote-endpoint = <&admaif12_ep>;
+ };
+ };
+
+ port@d {
+ reg = <0xd>;
+
+ xbar_admaif13_ep: endpoint {
+ remote-endpoint = <&admaif13_ep>;
+ };
+ };
+
+ port@e {
+ reg = <0xe>;
+
+ xbar_admaif14_ep: endpoint {
+ remote-endpoint = <&admaif14_ep>;
+ };
+ };
+
+ port@f {
+ reg = <0xf>;
+
+ xbar_admaif15_ep: endpoint {
+ remote-endpoint = <&admaif15_ep>;
+ };
+ };
+
+ port@10 {
+ reg = <0x10>;
+
+ xbar_admaif16_ep: endpoint {
+ remote-endpoint = <&admaif16_ep>;
+ };
+ };
+
+ port@11 {
+ reg = <0x11>;
+
+ xbar_admaif17_ep: endpoint {
+ remote-endpoint = <&admaif17_ep>;
+ };
+ };
+
+ port@12 {
+ reg = <0x12>;
+
+ xbar_admaif18_ep: endpoint {
+ remote-endpoint = <&admaif18_ep>;
+ };
+ };
+
+ port@13 {
+ reg = <0x13>;
+
+ xbar_admaif19_ep: endpoint {
+ remote-endpoint = <&admaif19_ep>;
+ };
+ };
+
+ xbar_i2s1_port: port@14 {
+ reg = <0x14>;
+
+ xbar_i2s1_ep: endpoint {
+ remote-endpoint = <&i2s1_cif_ep>;
+ };
+ };
+
+ xbar_i2s2_port: port@15 {
+ reg = <0x15>;
+
+ xbar_i2s2_ep: endpoint {
+ remote-endpoint = <&i2s2_cif_ep>;
+ };
+ };
+
+ xbar_i2s3_port: port@16 {
+ reg = <0x16>;
+
+ xbar_i2s3_ep: endpoint {
+ remote-endpoint = <&i2s3_cif_ep>;
+ };
+ };
+
+ xbar_i2s4_port: port@17 {
+ reg = <0x17>;
+
+ xbar_i2s4_ep: endpoint {
+ remote-endpoint = <&i2s4_cif_ep>;
+ };
+ };
+
+ xbar_i2s5_port: port@18 {
+ reg = <0x18>;
+
+ xbar_i2s5_ep: endpoint {
+ remote-endpoint = <&i2s5_cif_ep>;
+ };
+ };
+
+ xbar_i2s6_port: port@19 {
+ reg = <0x19>;
+
+ xbar_i2s6_ep: endpoint {
+ remote-endpoint = <&i2s6_cif_ep>;
+ };
+ };
+
+ xbar_dmic1_port: port@1a {
+ reg = <0x1a>;
+
+ xbar_dmic1_ep: endpoint {
+ remote-endpoint = <&dmic1_cif_ep>;
+ };
+ };
+
+ xbar_dmic2_port: port@1b {
+ reg = <0x1b>;
+
+ xbar_dmic2_ep: endpoint {
+ remote-endpoint = <&dmic2_cif_ep>;
+ };
+ };
+
+ xbar_dmic3_port: port@1c {
+ reg = <0x1c>;
+
+ xbar_dmic3_ep: endpoint {
+ remote-endpoint = <&dmic3_cif_ep>;
+ };
+ };
+
+ xbar_dspk1_port: port@1e {
+ reg = <0x1e>;
+
+ xbar_dspk1_ep: endpoint {
+ remote-endpoint = <&dspk1_cif_ep>;
+ };
+ };
+
+ xbar_dspk2_port: port@1f {
+ reg = <0x1f>;
+
+ xbar_dspk2_ep: endpoint {
+ remote-endpoint = <&dspk2_cif_ep>;
+ };
+ };
+ };
+
+ admaif@290f000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ admaif0_port: port@0 {
+ reg = <0x0>;
+
+ admaif0_ep: endpoint {
+ remote-endpoint = <&xbar_admaif0_ep>;
+ };
+ };
+
+ admaif1_port: port@1 {
+ reg = <0x1>;
+
+ admaif1_ep: endpoint {
+ remote-endpoint = <&xbar_admaif1_ep>;
+ };
+ };
+
+ admaif2_port: port@2 {
+ reg = <0x2>;
+
+ admaif2_ep: endpoint {
+ remote-endpoint = <&xbar_admaif2_ep>;
+ };
+ };
+
+ admaif3_port: port@3 {
+ reg = <0x3>;
+
+ admaif3_ep: endpoint {
+ remote-endpoint = <&xbar_admaif3_ep>;
+ };
+ };
+
+ admaif4_port: port@4 {
+ reg = <0x4>;
+
+ admaif4_ep: endpoint {
+ remote-endpoint = <&xbar_admaif4_ep>;
+ };
+ };
+
+ admaif5_port: port@5 {
+ reg = <0x5>;
+
+ admaif5_ep: endpoint {
+ remote-endpoint = <&xbar_admaif5_ep>;
+ };
+ };
+
+ admaif6_port: port@6 {
+ reg = <0x6>;
+
+ admaif6_ep: endpoint {
+ remote-endpoint = <&xbar_admaif6_ep>;
+ };
+ };
+
+ admaif7_port: port@7 {
+ reg = <0x7>;
+
+ admaif7_ep: endpoint {
+ remote-endpoint = <&xbar_admaif7_ep>;
+ };
+ };
+
+ admaif8_port: port@8 {
+ reg = <0x8>;
+
+ admaif8_ep: endpoint {
+ remote-endpoint = <&xbar_admaif8_ep>;
+ };
+ };
+
+ admaif9_port: port@9 {
+ reg = <0x9>;
+
+ admaif9_ep: endpoint {
+ remote-endpoint = <&xbar_admaif9_ep>;
+ };
+ };
+
+ admaif10_port: port@a {
+ reg = <0xa>;
+
+ admaif10_ep: endpoint {
+ remote-endpoint = <&xbar_admaif10_ep>;
+ };
+ };
+
+ admaif11_port: port@b {
+ reg = <0xb>;
+
+ admaif11_ep: endpoint {
+ remote-endpoint = <&xbar_admaif11_ep>;
+ };
+ };
+
+ admaif12_port: port@c {
+ reg = <0xc>;
+
+ admaif12_ep: endpoint {
+ remote-endpoint = <&xbar_admaif12_ep>;
+ };
+ };
+
+ admaif13_port: port@d {
+ reg = <0xd>;
+
+ admaif13_ep: endpoint {
+ remote-endpoint = <&xbar_admaif13_ep>;
+ };
+ };
+
+ admaif14_port: port@e {
+ reg = <0xe>;
+
+ admaif14_ep: endpoint {
+ remote-endpoint = <&xbar_admaif14_ep>;
+ };
+ };
+
+ admaif15_port: port@f {
+ reg = <0xf>;
+
+ admaif15_ep: endpoint {
+ remote-endpoint = <&xbar_admaif15_ep>;
+ };
+ };
+
+ admaif16_port: port@10 {
+ reg = <0x10>;
+
+ admaif16_ep: endpoint {
+ remote-endpoint = <&xbar_admaif16_ep>;
+ };
+ };
+
+ admaif17_port: port@11 {
+ reg = <0x11>;
+
+ admaif17_ep: endpoint {
+ remote-endpoint = <&xbar_admaif17_ep>;
+ };
+ };
+
+ admaif18_port: port@12 {
+ reg = <0x12>;
+
+ admaif18_ep: endpoint {
+ remote-endpoint = <&xbar_admaif18_ep>;
+ };
+ };
+
+ admaif19_port: port@13 {
+ reg = <0x13>;
+
+ admaif19_ep: endpoint {
+ remote-endpoint = <&xbar_admaif19_ep>;
+ };
+ };
+ };
+ };
+
+ i2s@2901000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s1_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s1_ep>;
+ };
+ };
+
+ i2s1_port: port@1 {
+ reg = <1>;
+
+ i2s1_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@2901100 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s2_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s2_ep>;
+ };
+ };
+
+ i2s2_port: port@1 {
+ reg = <1>;
+
+ i2s2_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@2901200 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s3_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s3_ep>;
+ };
+ };
+
+ i2s3_port: port@1 {
+ reg = <1>;
+
+ i2s3_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@2901300 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s4_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s4_ep>;
+ };
+ };
+
+ i2s4_port: port@1 {
+ reg = <1>;
+
+ i2s4_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@2901400 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s5_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s5_ep>;
+ };
+ };
+
+ i2s5_port: port@1 {
+ reg = <1>;
+
+ i2s5_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@2901500 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s6_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s6_ep>;
+ };
+ };
+
+ i2s6_port: port@1 {
+ reg = <1>;
+
+ i2s6_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@2904000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic1_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic1_ep>;
+ };
+ };
+
+ dmic1_port: port@1 {
+ reg = <1>;
+
+ dmic1_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@2904100 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic2_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic2_ep>;
+ };
+ };
+
+ dmic2_port: port@1 {
+ reg = <1>;
+
+ dmic2_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@2904200 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic3_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic3_ep>;
+ };
+ };
+
+ dmic3_port: port@1 {
+ reg = <1>;
+
+ dmic3_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dspk@2905000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dspk1_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dspk1_ep>;
+ };
+ };
+
+ dspk1_port: port@1 {
+ reg = <1>;
+
+ dspk1_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dspk@2905100 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dspk2_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dspk2_ep>;
+ };
+ };
+
+ dspk2_port: port@1 {
+ reg = <1>;
+
+ dspk2_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+ };
+ };
+
i2c@3160000 {
power-monitor@42 {
compatible = "ti,ina3221";
@@ -369,4 +1088,27 @@
vin-supply = <&vdd_5v0_sys>;
};
+
+ sound {
+ compatible = "nvidia,tegra186-audio-graph-card";
+ status = "okay";
+
+ dais = /* FE */
+ <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+ <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+ <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+ <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+ <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+ /* Router */
+ <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>,
+ <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_i2s6_port>,
+ <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic3_port>,
+ <&xbar_dspk1_port>, <&xbar_dspk2_port>,
+ /* I/O */
+ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
+ <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>,
+ <&dmic3_port>, <&dspk1_port>, <&dspk2_port>;
+
+ label = "jetson-tx2-ape";
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 58c51965df47..02b26b39cedc 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1678,6 +1678,28 @@
interrupt-affinity = <&ca57_0 &ca57_1 &ca57_2 &ca57_3>;
};
+ sound {
+ status = "disabled";
+
+ clocks = <&bpmp TEGRA186_CLK_PLLA>,
+ <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ clock-names = "pll_a", "plla_out0";
+ assigned-clocks = <&bpmp TEGRA186_CLK_PLLA>,
+ <&bpmp TEGRA186_CLK_PLL_A_OUT0>,
+ <&bpmp TEGRA186_CLK_AUD_MCLK>;
+ assigned-clock-parents = <0>,
+ <&bpmp TEGRA186_CLK_PLLA>,
+ <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ /*
+ * PLLA supports dynamic ramp. Below initial rate is chosen
+ * for this to work and oscillate between base rates required
+ * for 8x and 11.025x sample rate streams.
+ */
+ assigned-clock-rates = <258000000>;
+
+ iommus = <&smmu TEGRA186_SID_APE>;
+ };
+
thermal-zones {
a57 {
polling-delay = <0>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index d71b7a1140fe..7e7b0eb90c80 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -93,6 +93,10 @@
vclamp-usb-supply = <&vdd_1v8ao>;
ports {
+ usb2-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
usb2-1 {
vbus-supply = <&vdd_5v0_sys>;
};
@@ -105,6 +109,10 @@
vbus-supply = <&vdd_5v0_sys>;
};
+ usb3-2 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
usb3-3 {
vbus-supply = <&vdd_5v0_sys>;
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 54d057beec59..2888efc42ba1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -21,6 +21,513 @@
interrupt-controller@2a40000 {
status = "okay";
};
+
+ ahub@2900800 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ xbar_admaif0_ep: endpoint {
+ remote-endpoint = <&admaif0_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+
+ xbar_admaif1_ep: endpoint {
+ remote-endpoint = <&admaif1_ep>;
+ };
+ };
+
+ port@2 {
+ reg = <0x2>;
+
+ xbar_admaif2_ep: endpoint {
+ remote-endpoint = <&admaif2_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <0x3>;
+
+ xbar_admaif3_ep: endpoint {
+ remote-endpoint = <&admaif3_ep>;
+ };
+ };
+
+ port@4 {
+ reg = <0x4>;
+
+ xbar_admaif4_ep: endpoint {
+ remote-endpoint = <&admaif4_ep>;
+ };
+ };
+
+ port@5 {
+ reg = <0x5>;
+
+ xbar_admaif5_ep: endpoint {
+ remote-endpoint = <&admaif5_ep>;
+ };
+ };
+
+ port@6 {
+ reg = <0x6>;
+
+ xbar_admaif6_ep: endpoint {
+ remote-endpoint = <&admaif6_ep>;
+ };
+ };
+
+ port@7 {
+ reg = <0x7>;
+
+ xbar_admaif7_ep: endpoint {
+ remote-endpoint = <&admaif7_ep>;
+ };
+ };
+
+ port@8 {
+ reg = <0x8>;
+
+ xbar_admaif8_ep: endpoint {
+ remote-endpoint = <&admaif8_ep>;
+ };
+ };
+
+ port@9 {
+ reg = <0x9>;
+
+ xbar_admaif9_ep: endpoint {
+ remote-endpoint = <&admaif9_ep>;
+ };
+ };
+
+ port@a {
+ reg = <0xa>;
+
+ xbar_admaif10_ep: endpoint {
+ remote-endpoint = <&admaif10_ep>;
+ };
+ };
+
+ port@b {
+ reg = <0xb>;
+
+ xbar_admaif11_ep: endpoint {
+ remote-endpoint = <&admaif11_ep>;
+ };
+ };
+
+ port@c {
+ reg = <0xc>;
+
+ xbar_admaif12_ep: endpoint {
+ remote-endpoint = <&admaif12_ep>;
+ };
+ };
+
+ port@d {
+ reg = <0xd>;
+
+ xbar_admaif13_ep: endpoint {
+ remote-endpoint = <&admaif13_ep>;
+ };
+ };
+
+ port@e {
+ reg = <0xe>;
+
+ xbar_admaif14_ep: endpoint {
+ remote-endpoint = <&admaif14_ep>;
+ };
+ };
+
+ port@f {
+ reg = <0xf>;
+
+ xbar_admaif15_ep: endpoint {
+ remote-endpoint = <&admaif15_ep>;
+ };
+ };
+
+ port@10 {
+ reg = <0x10>;
+
+ xbar_admaif16_ep: endpoint {
+ remote-endpoint = <&admaif16_ep>;
+ };
+ };
+
+ port@11 {
+ reg = <0x11>;
+
+ xbar_admaif17_ep: endpoint {
+ remote-endpoint = <&admaif17_ep>;
+ };
+ };
+
+ port@12 {
+ reg = <0x12>;
+
+ xbar_admaif18_ep: endpoint {
+ remote-endpoint = <&admaif18_ep>;
+ };
+ };
+
+ port@13 {
+ reg = <0x13>;
+
+ xbar_admaif19_ep: endpoint {
+ remote-endpoint = <&admaif19_ep>;
+ };
+ };
+
+ xbar_i2s1_port: port@14 {
+ reg = <0x14>;
+
+ xbar_i2s1_ep: endpoint {
+ remote-endpoint = <&i2s1_cif_ep>;
+ };
+ };
+
+ xbar_i2s2_port: port@15 {
+ reg = <0x15>;
+
+ xbar_i2s2_ep: endpoint {
+ remote-endpoint = <&i2s2_cif_ep>;
+ };
+ };
+
+ xbar_i2s4_port: port@17 {
+ reg = <0x17>;
+
+ xbar_i2s4_ep: endpoint {
+ remote-endpoint = <&i2s4_cif_ep>;
+ };
+ };
+
+ xbar_i2s6_port: port@19 {
+ reg = <0x19>;
+
+ xbar_i2s6_ep: endpoint {
+ remote-endpoint = <&i2s6_cif_ep>;
+ };
+ };
+
+ xbar_dmic3_port: port@1c {
+ reg = <0x1c>;
+
+ xbar_dmic3_ep: endpoint {
+ remote-endpoint = <&dmic3_cif_ep>;
+ };
+ };
+ };
+
+ admaif@290f000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ admaif0_port: port@0 {
+ reg = <0x0>;
+
+ admaif0_ep: endpoint {
+ remote-endpoint = <&xbar_admaif0_ep>;
+ };
+ };
+
+ admaif1_port: port@1 {
+ reg = <0x1>;
+
+ admaif1_ep: endpoint {
+ remote-endpoint = <&xbar_admaif1_ep>;
+ };
+ };
+
+ admaif2_port: port@2 {
+ reg = <0x2>;
+
+ admaif2_ep: endpoint {
+ remote-endpoint = <&xbar_admaif2_ep>;
+ };
+ };
+
+ admaif3_port: port@3 {
+ reg = <0x3>;
+
+ admaif3_ep: endpoint {
+ remote-endpoint = <&xbar_admaif3_ep>;
+ };
+ };
+
+ admaif4_port: port@4 {
+ reg = <0x4>;
+
+ admaif4_ep: endpoint {
+ remote-endpoint = <&xbar_admaif4_ep>;
+ };
+ };
+
+ admaif5_port: port@5 {
+ reg = <0x5>;
+
+ admaif5_ep: endpoint {
+ remote-endpoint = <&xbar_admaif5_ep>;
+ };
+ };
+
+ admaif6_port: port@6 {
+ reg = <0x6>;
+
+ admaif6_ep: endpoint {
+ remote-endpoint = <&xbar_admaif6_ep>;
+ };
+ };
+
+ admaif7_port: port@7 {
+ reg = <0x7>;
+
+ admaif7_ep: endpoint {
+ remote-endpoint = <&xbar_admaif7_ep>;
+ };
+ };
+
+ admaif8_port: port@8 {
+ reg = <0x8>;
+
+ admaif8_ep: endpoint {
+ remote-endpoint = <&xbar_admaif8_ep>;
+ };
+ };
+
+ admaif9_port: port@9 {
+ reg = <0x9>;
+
+ admaif9_ep: endpoint {
+ remote-endpoint = <&xbar_admaif9_ep>;
+ };
+ };
+
+ admaif10_port: port@a {
+ reg = <0xa>;
+
+ admaif10_ep: endpoint {
+ remote-endpoint = <&xbar_admaif10_ep>;
+ };
+ };
+
+ admaif11_port: port@b {
+ reg = <0xb>;
+
+ admaif11_ep: endpoint {
+ remote-endpoint = <&xbar_admaif11_ep>;
+ };
+ };
+
+ admaif12_port: port@c {
+ reg = <0xc>;
+
+ admaif12_ep: endpoint {
+ remote-endpoint = <&xbar_admaif12_ep>;
+ };
+ };
+
+ admaif13_port: port@d {
+ reg = <0xd>;
+
+ admaif13_ep: endpoint {
+ remote-endpoint = <&xbar_admaif13_ep>;
+ };
+ };
+
+ admaif14_port: port@e {
+ reg = <0xe>;
+
+ admaif14_ep: endpoint {
+ remote-endpoint = <&xbar_admaif14_ep>;
+ };
+ };
+
+ admaif15_port: port@f {
+ reg = <0xf>;
+
+ admaif15_ep: endpoint {
+ remote-endpoint = <&xbar_admaif15_ep>;
+ };
+ };
+
+ admaif16_port: port@10 {
+ reg = <0x10>;
+
+ admaif16_ep: endpoint {
+ remote-endpoint = <&xbar_admaif16_ep>;
+ };
+ };
+
+ admaif17_port: port@11 {
+ reg = <0x11>;
+
+ admaif17_ep: endpoint {
+ remote-endpoint = <&xbar_admaif17_ep>;
+ };
+ };
+
+ admaif18_port: port@12 {
+ reg = <0x12>;
+
+ admaif18_ep: endpoint {
+ remote-endpoint = <&xbar_admaif18_ep>;
+ };
+ };
+
+ admaif19_port: port@13 {
+ reg = <0x13>;
+
+ admaif19_ep: endpoint {
+ remote-endpoint = <&xbar_admaif19_ep>;
+ };
+ };
+ };
+ };
+
+ i2s@2901000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s1_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s1_ep>;
+ };
+ };
+
+ i2s1_port: port@1 {
+ reg = <1>;
+
+ i2s1_dap_ep: endpoint {
+ dai-format = "i2s";
+ remote-endpoint = <&rt5658_ep>;
+ };
+ };
+ };
+ };
+
+ i2s@2901100 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s2_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s2_ep>;
+ };
+ };
+
+ i2s2_port: port@1 {
+ reg = <1>;
+
+ i2s2_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@2901300 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s4_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s4_ep>;
+ };
+ };
+
+ i2s4_port: port@1 {
+ reg = <1>;
+
+ i2s4_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@2901500 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s6_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s6_ep>;
+ };
+ };
+
+ i2s6_port: port@1 {
+ reg = <1>;
+
+ i2s6_dap_ep: endpoint@0 {
+ dai-format = "i2s";
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@2904200 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic3_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic3_ep>;
+ };
+ };
+
+ dmic3_port: port@1 {
+ reg = <1>;
+
+ dmic3_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+ };
};
i2c@3160000 {
@@ -57,6 +564,10 @@
pads {
usb2 {
lanes {
+ usb2-0 {
+ status = "okay";
+ };
+
usb2-1 {
status = "okay";
};
@@ -73,6 +584,10 @@
status = "okay";
};
+ usb3-2 {
+ status = "okay";
+ };
+
usb3-3 {
status = "okay";
};
@@ -81,6 +596,11 @@
};
ports {
+ usb2-0 {
+ mode = "host";
+ status = "okay";
+ };
+
usb2-1 {
mode = "host";
status = "okay";
@@ -96,6 +616,11 @@
status = "okay";
};
+ usb3-2 {
+ nvidia,usb2-companion = <0>;
+ status = "okay";
+ };
+
usb3-3 {
nvidia,usb2-companion = <3>;
maximum-speed = "super-speed";
@@ -107,11 +632,36 @@
usb@3610000 {
status = "okay";
- phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>,
<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
- phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
+ phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
+ };
+
+ i2c@c250000 {
+ status = "okay";
+
+ rt5658: audio-codec@1a {
+ status = "okay";
+
+ compatible = "realtek,rt5658";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA194_MAIN_GPIO(S, 5) GPIO_ACTIVE_HIGH>;
+ realtek,jd-src = <2>;
+ sound-name-prefix = "CVB-RT";
+
+ port {
+ rt5658_ep: endpoint {
+ remote-endpoint = <&i2s1_dap_ep>;
+ mclk-fs = <256>;
+ clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>;
+ };
+ };
+ };
};
pwm@c340000 {
@@ -263,6 +813,47 @@
};
};
+ sound {
+ compatible = "nvidia,tegra186-audio-graph-card";
+ status = "okay";
+
+ dais = /* ADMAIF (FE) Ports */
+ <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+ <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+ <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+ <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+ <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+ /* XBAR Ports */
+ <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+ <&xbar_i2s6_port>, <&xbar_dmic3_port>,
+ /* BE I/O Ports */
+ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
+ <&dmic3_port>;
+
+ label = "jetson-xavier-ape";
+
+ widgets =
+ "Microphone", "CVB-RT MIC Jack",
+ "Microphone", "CVB-RT MIC",
+ "Headphone", "CVB-RT HP Jack",
+ "Speaker", "CVB-RT SPK";
+
+ routing =
+ /* I2S1 <-> RT5658 */
+ "CVB-RT AIF1 Playback", "I2S1 DAP-Playback",
+ "I2S1 DAP-Capture", "CVB-RT AIF1 Capture",
+ /* RT5658 Codec controls */
+ "CVB-RT HP Jack", "CVB-RT HPO L Playback",
+ "CVB-RT HP Jack", "CVB-RT HPO R Playback",
+ "CVB-RT IN1P", "CVB-RT MIC Jack",
+ "CVB-RT IN2P", "CVB-RT MIC Jack",
+ "CVB-RT SPK", "CVB-RT SPO Playback",
+ "CVB-RT DMIC L1", "CVB-RT MIC",
+ "CVB-RT DMIC L2", "CVB-RT MIC",
+ "CVB-RT DMIC R1", "CVB-RT MIC",
+ "CVB-RT DMIC R2", "CVB-RT MIC";
+ };
+
thermal-zones {
cpu {
polling-delay = <0>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
index 7f97b34216a0..1c3874b677c0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
@@ -1,345 +1,10 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/input/gpio-keys.h>
-
#include "tegra194-p3668-0000.dtsi"
+#include "tegra194-p3509-0000.dtsi"
/ {
- model = "NVIDIA Jetson Xavier NX Developer Kit";
+ model = "NVIDIA Jetson Xavier NX Developer Kit (SD-card)";
compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194";
-
- bus@0 {
- aconnect@2900000 {
- status = "okay";
-
- dma-controller@2930000 {
- status = "okay";
- };
-
- interrupt-controller@2a40000 {
- status = "okay";
- };
- };
-
- ddc: i2c@3190000 {
- status = "okay";
- };
-
- i2c@3160000 {
- eeprom@57 {
- compatible = "atmel,24c02";
- reg = <0x57>;
-
- label = "system";
- vcc-supply = <&vdd_1v8>;
- address-width = <8>;
- pagesize = <8>;
- size = <256>;
- read-only;
- };
- };
-
- hda@3510000 {
- nvidia,model = "jetson-xavier-nx-hda";
- status = "okay";
- };
-
- padctl@3520000 {
- status = "okay";
-
- pads {
- usb2 {
- lanes {
- usb2-1 {
- status = "okay";
- };
-
- usb2-2 {
- status = "okay";
- };
- };
- };
-
- usb3 {
- lanes {
- usb3-2 {
- status = "okay";
- };
- };
- };
- };
-
- ports {
- usb2-1 {
- mode = "host";
- status = "okay";
- };
-
- usb2-2 {
- mode = "host";
- vbus-supply = <&vdd_5v0_sys>;
- status = "okay";
- };
-
- usb3-2 {
- nvidia,usb2-companion = <1>;
- vbus-supply = <&vdd_5v0_sys>;
- status = "okay";
- };
- };
- };
-
- usb@3610000 {
- status = "okay";
-
- phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
- <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
- <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
- phy-names = "usb2-1", "usb2-2", "usb3-2";
- };
-
- pwm@32d0000 {
- status = "okay";
- };
-
- host1x@13e00000 {
- display-hub@15200000 {
- status = "okay";
- };
-
- dpaux@155c0000 {
- status = "okay";
- };
-
- dpaux@155d0000 {
- status = "okay";
- };
-
- /* DP0 */
- sor@15b00000 {
- status = "okay";
-
- avdd-io-hdmi-dp-supply = <&vdd_1v0>;
- vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
-
- nvidia,dpaux = <&dpaux0>;
- };
-
- /* HDMI */
- sor@15b40000 {
- status = "okay";
-
- avdd-io-hdmi-dp-supply = <&vdd_1v0>;
- vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
- hdmi-supply = <&vdd_hdmi>;
-
- nvidia,ddc-i2c-bus = <&ddc>;
- nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1)
- GPIO_ACTIVE_LOW>;
- };
- };
- };
-
- pcie@14160000 {
- status = "okay";
-
- vddio-pex-ctl-supply = <&vdd_1v8ao>;
-
- phys = <&p2u_hsio_11>;
- phy-names = "p2u-0";
- };
-
- pcie@141a0000 {
- status = "okay";
-
- vddio-pex-ctl-supply = <&vdd_1v8ao>;
-
- phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
- <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
- <&p2u_nvhs_6>, <&p2u_nvhs_7>;
-
- phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
- "p2u-5", "p2u-6", "p2u-7";
- };
-
- pcie_ep@141a0000 {
- status = "disabled";
-
- vddio-pex-ctl-supply = <&vdd_1v8ao>;
-
- reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
-
- nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
- GPIO_ACTIVE_HIGH>;
-
- phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
- <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
- <&p2u_nvhs_6>, <&p2u_nvhs_7>;
-
- phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
- "p2u-5", "p2u-6", "p2u-7";
- };
-
- fan: fan {
- compatible = "pwm-fan";
- pwms = <&pwm6 0 45334>;
-
- cooling-levels = <0 64 128 255>;
- #cooling-cells = <2>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- force-recovery {
- label = "Force Recovery";
- gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
- GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_KEY>;
- linux,code = <KEY_SLEEP>;
- debounce-interval = <10>;
- };
-
- power {
- label = "Power";
- gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
- GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_KEY>;
- linux,code = <KEY_POWER>;
- debounce-interval = <10>;
- wakeup-event-action = <EV_ACT_ASSERTED>;
- wakeup-source;
- };
- };
-
- vdd_5v0_sys: regulator@100 {
- compatible = "regulator-fixed";
- regulator-name = "VDD_5V_SYS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_3v3_sys: regulator@101 {
- compatible = "regulator-fixed";
- regulator-name = "VDD_3V3_SYS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_3v3_ao: regulator@102 {
- compatible = "regulator-fixed";
- regulator-name = "VDD_3V3_AO";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_1v8: regulator@103 {
- compatible = "regulator-fixed";
- regulator-name = "VDD_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_hdmi: regulator@104 {
- compatible = "regulator-fixed";
- regulator-name = "VDD_5V0_HDMI_CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- thermal-zones {
- cpu {
- polling-delay = <0>;
- polling-delay-passive = <500>;
- status = "okay";
-
- trips {
- cpu_trip_critical: critical {
- temperature = <96500>;
- hysteresis = <0>;
- type = "critical";
- };
-
- cpu_trip_hot: hot {
- temperature = <70000>;
- hysteresis = <2000>;
- type = "hot";
- };
-
- cpu_trip_active: active {
- temperature = <50000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- cpu_trip_passive: passive {
- temperature = <30000>;
- hysteresis = <2000>;
- type = "passive";
- };
- };
-
- cooling-maps {
- cpu-critical {
- cooling-device = <&fan 3 3>;
- trip = <&cpu_trip_critical>;
- };
-
- cpu-hot {
- cooling-device = <&fan 2 2>;
- trip = <&cpu_trip_hot>;
- };
-
- cpu-active {
- cooling-device = <&fan 1 1>;
- trip = <&cpu_trip_active>;
- };
-
- cpu-passive {
- cooling-device = <&fan 0 0>;
- trip = <&cpu_trip_passive>;
- };
- };
- };
-
- gpu {
- polling-delay = <0>;
- polling-delay-passive = <500>;
- status = "okay";
-
- trips {
- gpu_alert0: critical {
- temperature = <99000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
- };
-
- aux {
- polling-delay = <0>;
- polling-delay-passive = <500>;
- status = "okay";
-
- trips {
- aux_alert0: critical {
- temperature = <90000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
- };
- };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts
new file mode 100644
index 000000000000..238fd98e8e45
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p3668-0001.dtsi"
+#include "tegra194-p3509-0000.dtsi"
+
+/ {
+ model = "NVIDIA Jetson Xavier NX Developer Kit (eMMC)";
+ compatible = "nvidia,p3509-0000+p3668-0001", "nvidia,tegra194";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
new file mode 100644
index 000000000000..d1d77220154f
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+ bus@0 {
+ aconnect@2900000 {
+ status = "okay";
+
+ dma-controller@2930000 {
+ status = "okay";
+ };
+
+ interrupt-controller@2a40000 {
+ status = "okay";
+ };
+ };
+
+ ddc: i2c@3190000 {
+ status = "okay";
+ };
+
+ i2c@3160000 {
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+
+ label = "system";
+ vcc-supply = <&vdd_1v8>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
+ hda@3510000 {
+ nvidia,model = "jetson-xavier-nx-hda";
+ status = "okay";
+ };
+
+ padctl@3520000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ lanes {
+ usb2-1 {
+ status = "okay";
+ };
+
+ usb2-2 {
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-2 {
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-1 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-2 {
+ mode = "host";
+ vbus-supply = <&vdd_5v0_sys>;
+ status = "okay";
+ };
+
+ usb3-2 {
+ nvidia,usb2-companion = <1>;
+ vbus-supply = <&vdd_5v0_sys>;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3610000 {
+ status = "okay";
+
+ phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+ phy-names = "usb2-1", "usb2-2", "usb3-2";
+ };
+
+ spi@3270000 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "spi-nor";
+ reg = <0>;
+ spi-max-frequency = <102000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+ };
+
+ pwm@32d0000 {
+ status = "okay";
+ };
+
+ host1x@13e00000 {
+ display-hub@15200000 {
+ status = "okay";
+ };
+
+ dpaux@155c0000 {
+ status = "okay";
+ };
+
+ dpaux@155d0000 {
+ status = "okay";
+ };
+
+ /* DP0 */
+ sor@15b00000 {
+ status = "okay";
+
+ avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+ vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+
+ nvidia,dpaux = <&dpaux0>;
+ };
+
+ /* HDMI */
+ sor@15b40000 {
+ status = "okay";
+
+ avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+ vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+ hdmi-supply = <&vdd_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1)
+ GPIO_ACTIVE_LOW>;
+ };
+ };
+ };
+
+ pcie@14160000 {
+ status = "okay";
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+ phys = <&p2u_hsio_11>;
+ phy-names = "p2u-0";
+ };
+
+ pcie@141a0000 {
+ status = "okay";
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+ phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+ <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+ <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+ "p2u-5", "p2u-6", "p2u-7";
+ };
+
+ pcie_ep@141a0000 {
+ status = "disabled";
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+ reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+ nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+ GPIO_ACTIVE_HIGH>;
+
+ phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+ <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+ <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+ "p2u-5", "p2u-6", "p2u-7";
+ };
+
+ fan: fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm6 0 45334>;
+
+ cooling-levels = <0 64 128 255>;
+ #cooling-cells = <2>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ force-recovery {
+ label = "Force Recovery";
+ gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_SLEEP>;
+ debounce-interval = <10>;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+ };
+
+ vdd_5v0_sys: regulator@100 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3_sys: regulator@101 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3_ao: regulator@102 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_AO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8: regulator@103 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_hdmi: regulator@104 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V0_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ thermal-zones {
+ cpu {
+ polling-delay = <0>;
+ polling-delay-passive = <500>;
+ status = "okay";
+
+ trips {
+ cpu_trip_critical: critical {
+ temperature = <96500>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+
+ cpu_trip_hot: hot {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_trip_active: active {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_trip_passive: passive {
+ temperature = <30000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ cpu-critical {
+ cooling-device = <&fan 3 3>;
+ trip = <&cpu_trip_critical>;
+ };
+
+ cpu-hot {
+ cooling-device = <&fan 2 2>;
+ trip = <&cpu_trip_hot>;
+ };
+
+ cpu-active {
+ cooling-device = <&fan 1 1>;
+ trip = <&cpu_trip_active>;
+ };
+
+ cpu-passive {
+ cooling-device = <&fan 0 0>;
+ trip = <&cpu_trip_passive>;
+ };
+ };
+ };
+
+ gpu {
+ polling-delay = <0>;
+ polling-delay-passive = <500>;
+ status = "okay";
+
+ trips {
+ gpu_alert0: critical {
+ temperature = <99000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aux {
+ polling-delay = <0>;
+ polling-delay-passive = <500>;
+ status = "okay";
+
+ trips {
+ aux_alert0: critical {
+ temperature = <90000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
index 0dc8304a2edd..7da3d48cb410 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
@@ -1,79 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
-#include "tegra194.dtsi"
-
-#include <dt-bindings/mfd/max77620.h>
+#include "tegra194-p3668.dtsi"
/ {
- model = "NVIDIA Jetson Xavier NX";
+ model = "NVIDIA Jetson Xavier NX (SD-card)";
compatible = "nvidia,p3668-0000", "nvidia,tegra194";
- aliases {
- ethernet0 = "/bus@0/ethernet@2490000";
- i2c0 = "/bpmp/i2c";
- i2c1 = "/bus@0/i2c@3160000";
- i2c2 = "/bus@0/i2c@c240000";
- i2c3 = "/bus@0/i2c@3180000";
- i2c4 = "/bus@0/i2c@3190000";
- i2c5 = "/bus@0/i2c@31c0000";
- i2c6 = "/bus@0/i2c@c250000";
- i2c7 = "/bus@0/i2c@31e0000";
- mmc0 = "/bus@0/mmc@3460000";
- rtc0 = "/bpmp/i2c/pmic@3c";
- rtc1 = "/bus@0/rtc@c2a0000";
- serial0 = &tcu;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = "serial0:115200n8";
- };
-
bus@0 {
- ethernet@2490000 {
- status = "okay";
-
- phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
- phy-handle = <&phy>;
- phy-mode = "rgmii-id";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy: phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x0>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
- #phy-cells = <0>;
- };
- };
- };
-
- memory-controller@2c00000 {
- status = "okay";
- };
-
- serial@3100000 {
- status = "okay";
- };
-
- i2c@3160000 {
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
-
- label = "module";
- vcc-supply = <&vdd_1v8ls>;
- address-width = <8>;
- pagesize = <8>;
- size = <256>;
- read-only;
- };
- };
-
/* SDMMC1 (SD/MMC) */
mmc@3400000 {
status = "okay";
@@ -82,216 +14,6 @@
disable-wp;
vmmc-supply = <&vdd_3v3_sd>;
};
-
- padctl@3520000 {
- avdd-usb-supply = <&vdd_usb_3v3>;
- vclamp-usb-supply = <&vdd_1v8ao>;
-
- ports {
- usb2-1 {
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-3 {
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb3-0 {
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb3-3 {
- vbus-supply = <&vdd_5v0_sys>;
- };
- };
- };
-
- rtc@c2a0000 {
- status = "okay";
- };
-
- pmc@c360000 {
- nvidia,invert-interrupt;
- };
- };
-
- bpmp {
- i2c {
- status = "okay";
-
- pmic: pmic@3c {
- compatible = "maxim,max20024";
- reg = <0x3c>;
-
- interrupt-parent = <&pmc>;
- interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
- #interrupt-cells = <2>;
- interrupt-controller;
-
- #gpio-cells = <2>;
- gpio-controller;
-
- pinctrl-names = "default";
- pinctrl-0 = <&max20024_default>;
-
- max20024_default: pinmux {
- gpio0 {
- pins = "gpio0";
- function = "gpio";
- };
-
- gpio1 {
- pins = "gpio1";
- function = "fps-out";
- maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
- };
-
- gpio2 {
- pins = "gpio2";
- function = "fps-out";
- maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
- };
-
- gpio3 {
- pins = "gpio3";
- function = "fps-out";
- maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
- };
-
- gpio4 {
- pins = "gpio4";
- function = "32k-out1";
- drive-push-pull = <1>;
- };
-
- gpio6 {
- pins = "gpio6";
- function = "gpio";
- drive-push-pull = <1>;
- };
-
- gpio7 {
- pins = "gpio7";
- function = "gpio";
- drive-push-pull = <0>;
- };
- };
-
- fps {
- fps0 {
- maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
- maxim,shutdown-fps-time-period-us = <640>;
- };
-
- fps1 {
- maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
- maxim,shutdown-fps-time-period-us = <640>;
- maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
- };
-
- fps2 {
- maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
- maxim,shutdown-fps-time-period-us = <640>;
- };
- };
-
- regulators {
- in-sd0-supply = <&vdd_5v0_sys>;
- in-sd1-supply = <&vdd_5v0_sys>;
- in-sd2-supply = <&vdd_5v0_sys>;
- in-sd3-supply = <&vdd_5v0_sys>;
- in-sd4-supply = <&vdd_5v0_sys>;
-
- in-ldo0-1-supply = <&vdd_5v0_sys>;
- in-ldo2-supply = <&vdd_5v0_sys>;
- in-ldo3-5-supply = <&vdd_5v0_sys>;
- in-ldo4-6-supply = <&vdd_5v0_sys>;
- in-ldo7-8-supply = <&vdd_1v8ls>;
-
- vdd_1v0: sd0 {
- regulator-name = "VDDIO_SYS_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_1v8hs: sd1 {
- regulator-name = "VDDIO_SYS_1V8HS";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_1v8ls: sd2 {
- regulator-name = "VDDIO_SYS_1V8LS";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_1v8ao: sd3 {
- regulator-name = "VDDIO_AO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- sd4 {
- regulator-name = "VDD_DDR_1V1";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo0 {
- regulator-name = "VDD_RTC";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo2 {
- regulator-name = "VDDIO_AO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo3 {
- regulator-name = "VDD_EMMC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdd_usb_3v3: ldo5 {
- regulator-name = "VDD_USB_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo6 {
- regulator-name = "VDD_SDIO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo7 {
- regulator-name = "AVDD_CSI_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
- };
- };
- };
};
vdd_3v3_sd: regulator@0 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi
new file mode 100644
index 000000000000..b7808648cfe4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194-p3668.dtsi"
+
+/ {
+ model = "NVIDIA Jetson Xavier NX (eMMC)";
+ compatible = "nvidia,p3668-0001", "nvidia,tegra194";
+
+ bus@0 {
+ /* SDMMC4 (eMMC) */
+ mmc@3460000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ vqmmc-supply = <&vdd_1v8ls>;
+ vmmc-supply = <&vdd_emmc_3v3>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
new file mode 100644
index 000000000000..4f12721c332b
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+ aliases {
+ ethernet0 = "/bus@0/ethernet@2490000";
+ i2c0 = "/bpmp/i2c";
+ i2c1 = "/bus@0/i2c@3160000";
+ i2c2 = "/bus@0/i2c@c240000";
+ i2c3 = "/bus@0/i2c@3180000";
+ i2c4 = "/bus@0/i2c@3190000";
+ i2c5 = "/bus@0/i2c@31c0000";
+ i2c6 = "/bus@0/i2c@c250000";
+ i2c7 = "/bus@0/i2c@31e0000";
+ mmc0 = "/bus@0/mmc@3460000";
+ rtc0 = "/bpmp/i2c/pmic@3c";
+ rtc1 = "/bus@0/rtc@c2a0000";
+ serial0 = &tcu;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ bus@0 {
+ ethernet@2490000 {
+ status = "okay";
+
+ phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+ phy-handle = <&phy>;
+ phy-mode = "rgmii-id";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ memory-controller@2c00000 {
+ status = "okay";
+ };
+
+ serial@3100000 {
+ status = "okay";
+ };
+
+ i2c@3160000 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+
+ label = "module";
+ vcc-supply = <&vdd_1v8ls>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
+ padctl@3520000 {
+ avdd-usb-supply = <&vdd_usb_3v3>;
+ vclamp-usb-supply = <&vdd_1v8ao>;
+
+ ports {
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb3-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb3-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
+ rtc@c2a0000 {
+ status = "okay";
+ };
+
+ pmc@c360000 {
+ nvidia,invert-interrupt;
+ };
+ };
+
+ bpmp {
+ i2c {
+ status = "okay";
+
+ pmic: pmic@3c {
+ compatible = "maxim,max20024";
+ reg = <0x3c>;
+
+ interrupt-parent = <&pmc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&max20024_default>;
+
+ max20024_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+ };
+
+ gpio2 {
+ pins = "gpio2";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+ };
+
+ gpio3 {
+ pins = "gpio3";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+ };
+
+ gpio4 {
+ pins = "gpio4";
+ function = "32k-out1";
+ drive-push-pull = <1>;
+ };
+
+ gpio6 {
+ pins = "gpio6";
+ function = "gpio";
+ drive-push-pull = <1>;
+ };
+
+ gpio7 {
+ pins = "gpio7";
+ function = "gpio";
+ drive-push-pull = <0>;
+ };
+ };
+
+ fps {
+ fps0 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+
+ fps1 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+ };
+
+ fps2 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+ };
+
+ regulators {
+ in-sd0-supply = <&vdd_5v0_sys>;
+ in-sd1-supply = <&vdd_5v0_sys>;
+ in-sd2-supply = <&vdd_5v0_sys>;
+ in-sd3-supply = <&vdd_5v0_sys>;
+ in-sd4-supply = <&vdd_5v0_sys>;
+
+ in-ldo0-1-supply = <&vdd_5v0_sys>;
+ in-ldo2-supply = <&vdd_5v0_sys>;
+ in-ldo3-5-supply = <&vdd_5v0_sys>;
+ in-ldo4-6-supply = <&vdd_5v0_sys>;
+ in-ldo7-8-supply = <&vdd_1v8ls>;
+
+ vdd_1v0: sd0 {
+ regulator-name = "VDDIO_SYS_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8hs: sd1 {
+ regulator-name = "VDDIO_SYS_1V8HS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8ls: sd2 {
+ regulator-name = "VDDIO_SYS_1V8LS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8ao: sd3 {
+ regulator-name = "VDDIO_AO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd4 {
+ regulator-name = "VDD_DDR_1V1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo0 {
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2 {
+ regulator-name = "VDDIO_AO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_emmc_3v3: ldo3 {
+ regulator-name = "VDD_EMMC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_usb_3v3: ldo5 {
+ regulator-name = "VDD_USB_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6 {
+ regulator-name = "VDD_SDIO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7 {
+ regulator-name = "AVDD_CSI_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 25f36d6118f8..9449156fae39 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -609,6 +609,34 @@
status = "disabled";
};
+ spi@3270000 {
+ compatible = "nvidia,tegra194-qspi";
+ reg = <0x3270000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA194_CLK_QSPI0>,
+ <&bpmp TEGRA194_CLK_QSPI0_PM>;
+ clock-names = "qspi", "qspi_out";
+ resets = <&bpmp TEGRA194_RESET_QSPI0>;
+ reset-names = "qspi";
+ status = "disabled";
+ };
+
+ spi@3300000 {
+ compatible = "nvidia,tegra194-qspi";
+ reg = <0x3300000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA194_CLK_QSPI1>,
+ <&bpmp TEGRA194_CLK_QSPI1_PM>;
+ clock-names = "qspi", "qspi_out";
+ resets = <&bpmp TEGRA194_RESET_QSPI1>;
+ reset-names = "qspi";
+ status = "disabled";
+ };
+
pwm1: pwm@3280000 {
compatible = "nvidia,tegra194-pwm",
"nvidia,tegra186-pwm";
@@ -2323,6 +2351,26 @@
method = "smc";
};
+ sound {
+ status = "disabled";
+
+ clocks = <&bpmp TEGRA194_CLK_PLLA>,
+ <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ clock-names = "pll_a", "plla_out0";
+ assigned-clocks = <&bpmp TEGRA194_CLK_PLLA>,
+ <&bpmp TEGRA194_CLK_PLLA_OUT0>,
+ <&bpmp TEGRA194_CLK_AUD_MCLK>;
+ assigned-clock-parents = <0>,
+ <&bpmp TEGRA194_CLK_PLLA>,
+ <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ /*
+ * PLLA supports dynamic ramp. Below initial rate is chosen
+ * for this to work and oscillate between base rates required
+ * for 8x and 11.025x sample rate streams.
+ */
+ assigned-clock-rates = <258000000>;
+ };
+
tcu: tcu {
compatible = "nvidia,tegra194-tcu";
mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index 69102dcea8b0..497635af7fab 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -126,5 +126,304 @@
interrupt-controller@702f9000 {
status = "okay";
};
+
+ ahub@702d0800 {
+ status = "okay";
+
+ admaif@702d0000 {
+ status = "okay";
+ };
+
+ i2s@702d1000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s1_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s1_ep>;
+ };
+ };
+
+ i2s1_port: port@1 {
+ reg = <1>;
+
+ i2s1_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@702d1100 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s2_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s2_ep>;
+ };
+ };
+
+ i2s2_port: port@1 {
+ reg = <1>;
+
+ i2s2_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@702d1200 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s3_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s3_ep>;
+ };
+ };
+
+ i2s3_port: port@1 {
+ reg = <1>;
+
+ i2s3_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@702d1300 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s4_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s4_ep>;
+ };
+ };
+
+ i2s4_port: port@1 {
+ reg = <1>;
+
+ i2s4_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@702d1400 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s5_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s5_ep>;
+ };
+ };
+
+ i2s5_port: port@1 {
+ reg = <1>;
+
+ i2s5_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@702d4000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic1_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic1_ep>;
+ };
+ };
+
+ dmic1_port: port@1 {
+ reg = <1>;
+
+ dmic1_dap_ep: endpoint {
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@702d4100 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic2_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic2_ep>;
+ };
+ };
+
+ dmic2_port: port@1 {
+ reg = <1>;
+
+ dmic2_dap_ep: endpoint {
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@702d4200 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic3_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic3_ep>;
+ };
+ };
+
+ dmic3_port: port@1 {
+ reg = <1>;
+
+ dmic3_dap_ep: endpoint {
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ ports {
+ xbar_i2s1_port: port@a {
+ reg = <0xa>;
+
+ xbar_i2s1_ep: endpoint {
+ remote-endpoint = <&i2s1_cif_ep>;
+ };
+ };
+
+ xbar_i2s2_port: port@b {
+ reg = <0xb>;
+
+ xbar_i2s2_ep: endpoint {
+ remote-endpoint = <&i2s2_cif_ep>;
+ };
+ };
+
+ xbar_i2s3_port: port@c {
+ reg = <0xc>;
+
+ xbar_i2s3_ep: endpoint {
+ remote-endpoint = <&i2s3_cif_ep>;
+ };
+ };
+
+ xbar_i2s4_port: port@d {
+ reg = <0xd>;
+
+ xbar_i2s4_ep: endpoint {
+ remote-endpoint = <&i2s4_cif_ep>;
+ };
+ };
+
+ xbar_i2s5_port: port@e {
+ reg = <0xe>;
+
+ xbar_i2s5_ep: endpoint {
+ remote-endpoint = <&i2s5_cif_ep>;
+ };
+ };
+
+ xbar_dmic1_port: port@f {
+ reg = <0xf>;
+
+ xbar_dmic1_ep: endpoint {
+ remote-endpoint = <&dmic1_cif_ep>;
+ };
+ };
+
+ xbar_dmic2_port: port@10 {
+ reg = <0x10>;
+
+ xbar_dmic2_ep: endpoint {
+ remote-endpoint = <&dmic2_cif_ep>;
+ };
+ };
+
+ xbar_dmic3_port: port@11 {
+ reg = <0x11>;
+
+ xbar_dmic3_ep: endpoint {
+ remote-endpoint = <&dmic3_cif_ep>;
+ };
+ };
+ };
+ };
+ };
+
+ sound {
+ compatible = "nvidia,tegra210-audio-graph-card";
+ status = "okay";
+
+ dais = /* FE */
+ <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+ <&admaif4_port>, <&admaif5_port>, <&admaif6_port>,
+ <&admaif7_port>, <&admaif8_port>, <&admaif9_port>,
+ <&admaif10_port>,
+ /* Router */
+ <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>,
+ <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>,
+ <&xbar_dmic2_port>, <&xbar_dmic3_port>,
+ /* I/O DAP Ports */
+ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
+ <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>;
+
+ label = "jetson-tx1-ape";
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 6a877decffc1..14c128a5e248 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -636,6 +636,162 @@
interrupt-controller@702f9000 {
status = "okay";
};
+
+ ahub@702d0800 {
+ status = "okay";
+
+ admaif@702d0000 {
+ status = "okay";
+ };
+
+ i2s@702d1200 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s3_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s3_ep>;
+ };
+ };
+
+ i2s3_port: port@1 {
+ reg = <1>;
+
+ i2s3_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@702d1300 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s4_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s4_ep>;
+ };
+ };
+
+ i2s4_port: port@1 {
+ reg = <1>;
+
+ i2s4_dap_ep: endpoint@0 {
+ dai-format = "i2s";
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@702d4000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic1_cif_ep: endpoint@0 {
+ remote-endpoint = <&xbar_dmic1_ep>;
+ };
+ };
+
+ dmic1_port: port@1 {
+ reg = <1>;
+
+ dmic1_dap_ep: endpoint@0 {
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@702d4100 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic2_cif_ep: endpoint@0 {
+ remote-endpoint = <&xbar_dmic2_ep>;
+ };
+ };
+
+ dmic2_port: port@1 {
+ reg = <1>;
+
+ dmic2_dap_ep: endpoint@0 {
+ /* Placeholder for external Codec */
+ };
+ };
+ };
+ };
+
+ ports {
+ xbar_i2s3_port: port@c {
+ reg = <0xc>;
+
+ xbar_i2s3_ep: endpoint {
+ remote-endpoint = <&i2s3_cif_ep>;
+ };
+ };
+
+ xbar_i2s4_port: port@d {
+ reg = <0xd>;
+
+ xbar_i2s4_ep: endpoint {
+ remote-endpoint = <&i2s4_cif_ep>;
+ };
+ };
+
+ xbar_dmic1_port: port@f {
+ reg = <0xf>;
+
+ xbar_dmic1_ep: endpoint {
+ remote-endpoint = <&dmic1_cif_ep>;
+ };
+ };
+
+ xbar_dmic2_port: port@10 {
+ reg = <0x10>;
+
+ xbar_dmic2_ep: endpoint {
+ remote-endpoint = <&dmic2_cif_ep>;
+ };
+ };
+ };
+ };
+ };
+
+ spi@70410000 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
};
clk32k_in: clock@0 {
@@ -870,4 +1026,23 @@
vin-supply = <&vdd_5v0_sys>;
};
+
+ sound {
+ compatible = "nvidia,tegra210-audio-graph-card";
+ status = "okay";
+
+ dais = /* FE */
+ <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+ <&admaif4_port>, <&admaif5_port>, <&admaif6_port>,
+ <&admaif7_port>, <&admaif8_port>, <&admaif9_port>,
+ <&admaif10_port>,
+ /* Router */
+ <&xbar_i2s3_port>, <&xbar_i2s4_port>,
+ <&xbar_dmic1_port>, <&xbar_dmic2_port>,
+ /* I/O DAP Ports */
+ <&i2s3_port>, <&i2s4_port>,
+ <&dmic1_port>, <&dmic2_port>;
+
+ label = "jetson-nano-ape";
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 4fbf8c15b0a1..26b3f98a211c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -997,6 +997,7 @@
<&tegra_car 128>, /* hda2hdmi */
<&tegra_car 111>; /* hda2codec_2x */
reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+ power-domains = <&pd_sor>;
status = "disabled";
};
@@ -1043,6 +1044,7 @@
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
resets = <&tegra_car 142>;
reset-names = "padctl";
+ nvidia,pmc = <&tegra_pmc>;
status = "disabled";
@@ -1307,6 +1309,32 @@
status = "disabled";
};
+ soctherm: thermal-sensor@700e2000 {
+ compatible = "nvidia,tegra210-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
+ <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+ reg-names = "soctherm-reg", "car-reg";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "thermal", "edp";
+ clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
+ <&tegra_car TEGRA210_CLK_SOC_THERM>;
+ clock-names = "tsensor", "soctherm";
+ resets = <&tegra_car 78>;
+ reset-names = "soctherm";
+ #thermal-sensor-cells = <1>;
+
+ throttle-cfgs {
+ throttle_heavy: heavy {
+ nvidia,priority = <100>;
+ nvidia,cpu-throt-percent = <85>;
+ nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+ #cooling-cells = <2>;
+ };
+ };
+ };
+
mipi: mipi@700e3000 {
compatible = "nvidia,tegra210-mipi";
reg = <0x0 0x700e3000 0x0 0x100>;
@@ -1425,6 +1453,91 @@
"rx9", "tx9",
"rx10", "tx10";
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ admaif1_port: port@0 {
+ reg = <0>;
+
+ admaif1_ep: endpoint {
+ remote-endpoint = <&xbar_admaif1_ep>;
+ };
+ };
+
+ admaif2_port: port@1 {
+ reg = <1>;
+
+ admaif2_ep: endpoint {
+ remote-endpoint = <&xbar_admaif2_ep>;
+ };
+ };
+
+ admaif3_port: port@2 {
+ reg = <2>;
+
+ admaif3_ep: endpoint {
+ remote-endpoint = <&xbar_admaif3_ep>;
+ };
+ };
+
+ admaif4_port: port@3 {
+ reg = <3>;
+
+ admaif4_ep: endpoint {
+ remote-endpoint = <&xbar_admaif4_ep>;
+ };
+ };
+
+ admaif5_port: port@4 {
+ reg = <4>;
+
+ admaif5_ep: endpoint {
+ remote-endpoint = <&xbar_admaif5_ep>;
+ };
+ };
+
+ admaif6_port: port@5 {
+ reg = <5>;
+
+ admaif6_ep: endpoint {
+ remote-endpoint = <&xbar_admaif6_ep>;
+ };
+ };
+
+ admaif7_port: port@6 {
+ reg = <6>;
+
+ admaif7_ep: endpoint {
+ remote-endpoint = <&xbar_admaif7_ep>;
+ };
+ };
+
+ admaif8_port: port@7 {
+ reg = <7>;
+
+ admaif8_ep: endpoint {
+ remote-endpoint = <&xbar_admaif8_ep>;
+ };
+ };
+
+ admaif9_port: port@8 {
+ reg = <8>;
+
+ admaif9_ep: endpoint {
+ remote-endpoint = <&xbar_admaif9_ep>;
+ };
+ };
+
+ admaif10_port: port@9 {
+ reg = <9>;
+
+ admaif10_ep: endpoint {
+ remote-endpoint = <&xbar_admaif10_ep>;
+ };
+ };
+ };
};
tegra_i2s1: i2s@702d1000 {
@@ -1527,6 +1640,89 @@
sound-name-prefix = "DMIC3";
status = "disabled";
};
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ xbar_admaif1_ep: endpoint {
+ remote-endpoint = <&admaif1_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+
+ xbar_admaif2_ep: endpoint {
+ remote-endpoint = <&admaif2_ep>;
+ };
+ };
+
+ port@2 {
+ reg = <0x2>;
+
+ xbar_admaif3_ep: endpoint {
+ remote-endpoint = <&admaif3_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <0x3>;
+
+ xbar_admaif4_ep: endpoint {
+ remote-endpoint = <&admaif4_ep>;
+ };
+ };
+
+ port@4 {
+ reg = <0x4>;
+ xbar_admaif5_ep: endpoint {
+ remote-endpoint = <&admaif5_ep>;
+ };
+ };
+ port@5 {
+ reg = <0x5>;
+
+ xbar_admaif6_ep: endpoint {
+ remote-endpoint = <&admaif6_ep>;
+ };
+ };
+
+ port@6 {
+ reg = <0x6>;
+
+ xbar_admaif7_ep: endpoint {
+ remote-endpoint = <&admaif7_ep>;
+ };
+ };
+
+ port@7 {
+ reg = <0x7>;
+
+ xbar_admaif8_ep: endpoint {
+ remote-endpoint = <&admaif8_ep>;
+ };
+ };
+
+ port@8 {
+ reg = <0x8>;
+
+ xbar_admaif9_ep: endpoint {
+ remote-endpoint = <&admaif9_ep>;
+ };
+ };
+
+ port@9 {
+ reg = <0x9>;
+
+ xbar_admaif10_ep: endpoint {
+ remote-endpoint = <&admaif10_ep>;
+ };
+ };
+ };
};
};
@@ -1536,8 +1732,9 @@
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car TEGRA210_CLK_QSPI>;
- clock-names = "qspi";
+ clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+ <&tegra_car TEGRA210_CLK_QSPI_PM>;
+ clock-names = "qspi", "qspi_out";
resets = <&tegra_car 211>;
reset-names = "qspi";
dmas = <&apbdma 5>, <&apbdma 5>;
@@ -1692,44 +1889,18 @@
&{/cpus/cpu@2} &{/cpus/cpu@3}>;
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- interrupt-parent = <&gic>;
- arm,no-tick-in-suspend;
- };
-
- soctherm: thermal-sensor@700e2000 {
- compatible = "nvidia,tegra210-soctherm";
- reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
- <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
- reg-names = "soctherm-reg", "car-reg";
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "thermal", "edp";
- clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
- <&tegra_car TEGRA210_CLK_SOC_THERM>;
- clock-names = "tsensor", "soctherm";
- resets = <&tegra_car 78>;
- reset-names = "soctherm";
- #thermal-sensor-cells = <1>;
+ sound {
+ status = "disabled";
- throttle-cfgs {
- throttle_heavy: heavy {
- nvidia,priority = <100>;
- nvidia,cpu-throt-percent = <85>;
- nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+ <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ clock-names = "pll_a", "plla_out0";
- #cooling-cells = <2>;
- };
- };
+ assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+ <&tegra_car TEGRA210_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA210_CLK_EXTERN1>;
+ assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <368640000>, <49152000>, <12288000>;
};
thermal-zones {
@@ -1866,4 +2037,18 @@
};
};
};
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ arm,no-tick-in-suspend;
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5113fac80b7a..549a7a2151d4 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,19 +1,27 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-talkman.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-cityman.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-octagon-cityman.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-ivy.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-karin.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
@@ -43,9 +51,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 3a9538e1ec97..6aef0c2e4f0a 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -301,6 +301,10 @@
status = "okay";
};
+&mdss {
+ status = "okay";
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts
new file mode 100644
index 000000000000..a8dffc8c64ea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+/* As the names may imply, there is quite a bunch of duplication there. */
+#include "msm8994-sony-xperia-kitakami-karin.dts"
+
+/ {
+ model = "Sony Xperia Z4 Tablet (Wi-Fi)";
+ compatible = "sony,karin_windy", "qcom,apq8094";
+
+ /*
+ * This model uses the APQ variant of MSM8994 (APQ8094).
+ * The v1/v2/v2.1 story (from kitakami.dtsi) also applies here.
+ */
+ qcom,msm-id = <253 0x20000>, <253 0x20001>;
+};
+
+/delete-node/ &pm8994_l1;
+/delete-node/ &pm8994_l19;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
new file mode 100644
index 000000000000..540b1fa4b260
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Alcatel OneTouch Idol 3 (4.7)";
+ compatible = "alcatel,idol347", "qcom,msm8916";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+ reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mag_reset_default>;
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+ };
+
+ accelerometer@f {
+ compatible = "kionix,kxtj21009";
+ reg = <0x0f>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_int_default>;
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+ };
+
+ proximity@48 {
+ compatible = "sensortek,stk3310";
+ reg = <0x48>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&proximity_int_default>;
+ };
+
+ gyroscope@68 {
+ compatible = "bosch,bmg160";
+ reg = <0x68>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <97 IRQ_TYPE_EDGE_RISING>,
+ <98 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyro_int_default>;
+ };
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+ cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&msmgpio {
+ accel_int_default: accel-int-default {
+ pins = "gpio31";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default {
+ pins = "gpio107";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gyro_int_default: gyro-int-default {
+ pins = "gpio97", "gpio98";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ mag_reset_default: mag-reset-default {
+ pins = "gpio8";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ proximity_int_default: proximity-int-default {
+ pins = "gpio12";
+ function = "gpio";
+
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ usb_id_default: usb-id-default {
+ pins = "gpio69";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
new file mode 100644
index 000000000000..cee451e59385
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Asus Zenfone 2 Laser";
+ compatible = "asus,z00l", "qcom,msm8916";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&msmgpio {
+ gpio_keys_default: gpio-keys-default {
+ pins = "gpio107", "gpio117";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ usb_id_default: usb-id-default {
+ pins = "gpio110";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
new file mode 100644
index 000000000000..27845189ac2b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "BQ Aquaris X5 (Longcheer L8910)";
+ compatible = "longcheer,l8910", "qcom,msm8916";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_WHITE>;
+ default-state = "off";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_backlight_default>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+};
+
+&blsp_i2c3 {
+ status = "okay";
+
+ magnetometer@d {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0d>;
+
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+
+ reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mag_reset_default>;
+ };
+
+ imu@68 {
+ compatible = "bosch,bmi160";
+ reg = <0x68>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+ cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&msmgpio {
+ button_backlight_default: button-backlight-default {
+ pins = "gpio17";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default {
+ pins = "gpio107";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ mag_reset_default: mag-reset-default {
+ pins = "gpio111";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb_id_default: usb-id-default {
+ pins = "gpio110";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 4dc437f13fa5..7dedb91b9930 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -220,6 +220,22 @@
bias-disable;
};
+ i2c3_default: i2c3-default {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c3_sleep: i2c3-sleep {
+ pins = "gpio10", "gpio11";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
i2c4_default: i2c4-default {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index f91269492d72..230ba3ce3277 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -106,6 +106,9 @@
interrupt-parent = <&msmgpio>;
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+
pinctrl-names = "default";
pinctrl-0 = <&accel_int_default>;
};
@@ -113,6 +116,9 @@
magnetometer@12 {
compatible = "bosch,bmc150_magn";
reg = <0x12>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
};
};
@@ -126,6 +132,10 @@
pinctrl-1 = <&mdss_sleep>;
};
+&mdss {
+ status = "okay";
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index e39c04d977c2..dd35c3344358 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -38,7 +38,7 @@
&pronto {
iris {
- compatible = "qcom,wcn3680";
+ compatible = "qcom,wcn3660b";
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 402e891a84ab..5353da521974 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -56,7 +56,7 @@
no-map;
};
- reserved@8668000 {
+ reserved@86680000 {
reg = <0x0 0x86680000 0x0 0x80000>;
no-map;
};
@@ -69,7 +69,7 @@
qcom,client-id = <1>;
};
- rfsa@867e00000 {
+ rfsa@867e0000 {
reg = <0x0 0x867e0000 0x0 0x20000>;
no-map;
};
@@ -913,6 +913,7 @@
};
mdss: mdss@1a00000 {
+ status = "disabled";
compatible = "qcom,mdss";
reg = <0x01a00000 0x1000>,
<0x01ac8000 0x3000>;
@@ -1528,6 +1529,21 @@
status = "disabled";
};
+ blsp_i2c3: i2c@78b7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b7000 0x500>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_default>;
+ pinctrl-1 = <&i2c3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
blsp_spi3: spi@78b7000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b7000 0x500>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 5969b5cfdc85..23cdcc9f7c72 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -6,6 +6,8 @@
/dts-v1/;
#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
/ {
model = "LG Nexus 5X";
@@ -44,7 +46,7 @@
};
&rpm_requests {
- pm8994-regulators {
+ pm8994_regulators: pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
vdd_l1-supply = <&pm8994_s1>;
@@ -53,15 +55,17 @@
vdd_l4_27_31-supply = <&pm8994_s3>;
vdd_l5_7-supply = <&pm8994_s3>;
vdd_l6_12_32-supply = <&pm8994_s5>;
- vdd_l8_16_30-supply = <&vreg_vph_pwr>;
- vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
- vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l8_16_30-supply = <&vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vph_pwr>;
vdd_l14_15-supply = <&pm8994_s5>;
- vdd_l17_29-supply = <&vreg_vph_pwr>;
- vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l17_29-supply = <&vph_pwr>;
+ vdd_l20_21-supply = <&vph_pwr>;
vdd_l25-supply = <&pm8994_s5>;
vdd_lvs1_2 = <&pm8994_s4>;
+ /* S1, S2, S6 and S12 are managed by RPMPD */
+
pm8994_s1: s1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
@@ -93,6 +97,8 @@
regulator-max-microvolt = <1000000>;
};
+ /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
+
pm8994_l1: l1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -113,18 +119,14 @@
regulator-max-microvolt = <1225000>;
};
- pm8994_l5: l5 {
- /* TODO */
- };
+ /* L5 is inaccessible from RPM */
pm8994_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- pm8994_l7: l7 {
- /* TODO */
- };
+ /* L7 is inaccessible from RPM */
pm8994_l8: l8 {
regulator-min-microvolt = <1800000>;
@@ -266,9 +268,22 @@
*/
};
};
+
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {};
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {};
+ };
};
-&sdhc_1 {
+&sdhc1 {
status = "okay";
mmc-hs400-1_8v;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts
new file mode 100644
index 000000000000..5322b9ce5839
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "msm8994-msft-lumia-octagon.dtsi"
+
+/ {
+ model = "Microsoft Lumia 950";
+ compatible = "microsoft,talkman", "qcom,msm8992";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
deleted file mode 100644
index c337a86a5c77..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2020, Konrad Dybcio
- */
-
-/dts-v1/;
-
-#include "msm8992.dtsi"
-#include "pm8994.dtsi"
-#include "pmi8994.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-
-/ {
- model = "Microsoft Lumia 950";
- compatible = "microsoft,talkman", "qcom,msm8992";
-
- /* Most Lumia 950 users use GRUB to load their kernels,
- * hence there is no need for msm-id and friends.
- */
-
- /* This enables graphical output via bootloader-enabled display.
- * acpi=no is required due to WP platforms having ACPI support, but
- * only for Windows-based OSes.
- */
- chosen {
- bootargs = "earlycon=efifb console=efifb acpi=no";
-
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- };
-};
-
-&blsp_i2c1 {
- status = "okay";
-
- rmi4-i2c-dev@4b {
- compatible = "syna,rmi4-i2c";
- reg = <0x4b>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
-
- rmi4-f01@1 {
- reg = <0x01>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f12@12 {
- reg = <0x12>;
- syna,sensor-type = <1>;
- syna,clip-x-low = <0>;
- syna,clip-x-high = <1440>;
- syna,clip-y-low = <0>;
- syna,clip-y-high = <2560>;
- };
- };
-};
-
-&sdhc_1 {
- status = "okay";
-
- mmc-hs200-1_8v;
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index 4f64ca3ea1ef..357d55496e75 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -70,21 +70,6 @@
pmsg-size = <0x20000>;
};
- continuous_splash: framebuffer@3401000{
- reg = <0x0 0x3401000 0x0 0x2200000>;
- no-map;
- };
-
- dfps_data_mem: dfps_data_mem@3400000 {
- reg = <0x0 0x3400000 0x0 0x1000>;
- no-map;
- };
-
- peripheral_region: peripheral_region@7400000 {
- reg = <0x0 0x7400000 0x0 0x1c00000>;
- no-map;
- };
-
modem_region: modem_region@9000000 {
reg = <0x0 0x9000000 0x0 0x5a00000>;
no-map;
@@ -97,43 +82,49 @@
};
};
-&blsp_i2c2 {
+&blsp1_i2c2 {
status = "okay";
/* Atmel or Synaptics touchscreen */
};
-&blsp_i2c5 {
+&blsp1_i2c5 {
status = "okay";
- /* Silabs si4705 FM transmitter */
+ /* ST lsm6db0 gyro/accelerometer */
};
-&blsp_i2c6 {
+&blsp1_i2c6 {
status = "okay";
- /* NCI NFC,
+ /*
+ * NXP NCI NFC,
* TI USB320 Type-C controller,
* Pericom 30216a USB (de)mux switch
*/
};
-&blsp_i2c7 {
+&blsp2_i2c1 {
status = "okay";
/* cm36686 proximity and ambient light sensor */
};
-&blsp_i2c13 {
+&blsp2_i2c5 {
status = "okay";
- /* ST lsm6db0 gyro/accelerometer */
+ /* Silabs si4705 FM transmitter */
};
&blsp2_uart2 {
status = "okay";
};
+&peripheral_region {
+ reg = <0x0 0x7400000 0x0 0x1c00000>;
+ no-map;
+};
+
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
@@ -144,24 +135,16 @@
vdd_l4_27_31-supply = <&pm8994_s3>;
vdd_l5_7-supply = <&pm8994_s3>;
vdd_l6_12_32-supply = <&pm8994_s5>;
- vdd_l8_16_30-supply = <&vreg_vph_pwr>;
- vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
- vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l8_16_30-supply = <&vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vph_pwr>;
vdd_l14_15-supply = <&pm8994_s5>;
- vdd_l17_29-supply = <&vreg_vph_pwr>;
- vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l17_29-supply = <&vph_pwr>;
+ vdd_l20_21-supply = <&vph_pwr>;
vdd_l25-supply = <&pm8994_s5>;
vdd_lvs1_2 = <&pm8994_s4>;
- pm8994_s1: s1 {
- /* unused */
- status = "disabled";
- };
-
- pm8994_s2: s2 {
- /* unused */
- status = "disabled";
- };
+ /* S1, S2, S6 and S12 are managed by RPMPD */
pm8994_s3: s3 {
regulator-min-microvolt = <1300000>;
@@ -186,6 +169,8 @@
regulator-max-microvolt = <1000000>;
};
+ /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
+
pm8994_l1: l1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -206,20 +191,14 @@
regulator-max-microvolt = <1225000>;
};
- pm8994_l5: l5 {
- /* unused */
- status = "disabled";
- };
+ /* L5 is inaccessible from RPM */
pm8994_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- pm8994_l7: l7 {
- /* unused */
- status = "disabled";
- };
+ /* L7 is inaccessible from RPM */
pm8994_l8: l8 {
regulator-min-microvolt = <1800000>;
@@ -352,10 +331,31 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ pm8994_lvs1: lvs1 {};
+ pm8994_lvs2: lvs2 {};
+ };
+
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3600000>;
+ };
};
};
-&sdhc_1 {
+&sdhc1 {
status = "okay";
mmc-hs400-1_8v;
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 0c422af47917..58fe58cc7703 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -2,738 +2,29 @@
/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+#include "msm8994.dtsi"
-/ {
- interrupt-parent = <&intc>;
+/* 8992 only features 2 A57 cores. */
+/delete-node/ &CPU6;
+/delete-node/ &CPU7;
+/delete-node/ &cpu6_map;
+/delete-node/ &cpu7_map;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU4: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x100>;
- next-level-cache = <&L2_1>;
- enable-method = "psci";
- L2_1: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- CPU5: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x101>;
- next-level-cache = <&L2_1>;
- enable-method = "psci";
- };
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU0>;
- };
-
- core1 {
- cpu = <&CPU1>;
- };
-
- core2 {
- cpu = <&CPU2>;
- };
-
- core3 {
- cpu = <&CPU3>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&CPU4>;
- };
-
- core1 {
- cpu = <&CPU5>;
- };
- };
- };
- };
-
- clocks {
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- };
-
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- firmware {
- scm {
- compatible = "qcom,scm-msm8994", "qcom,scm";
- };
- };
-
- memory {
- device_type = "memory";
- /* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
- };
-
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "hvc";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- smem_region: smem@6a00000 {
- reg = <0x0 0x6a00000 0x0 0x200000>;
- no-map;
- };
- };
-
- sfpb_mutex: hwmutex {
- compatible = "qcom,sfpb-mutex";
- syscon = <&sfpb_mutex_regs 0x0 0x100>;
- #hwlock-cells = <1>;
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_region>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- hwlocks = <&sfpb_mutex 3>;
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
- compatible = "simple-bus";
-
- intc: interrupt-controller@f9000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0xf9000000 0x1000>,
- <0xf9002000 0x1000>;
- };
-
- apcs: mailbox@f900d000 {
- compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
- reg = <0xf900d000 0x2000>;
- #mbox-cells = <1>;
- };
-
- timer@f9020000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0xf9020000 0x1000>;
-
- frame@f9021000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9021000 0x1000>,
- <0xf9022000 0x1000>;
- };
-
- frame@f9023000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9023000 0x1000>;
- status = "disabled";
- };
-
- frame@f9024000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9024000 0x1000>;
- status = "disabled";
- };
-
- frame@f9025000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9025000 0x1000>;
- status = "disabled";
- };
-
- frame@f9026000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9026000 0x1000>;
- status = "disabled";
- };
-
- frame@f9027000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9027000 0x1000>;
- status = "disabled";
- };
-
- frame@f9028000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9028000 0x1000>;
- status = "disabled";
- };
- };
-
- usb3: usb@f92f8800 {
- compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0xf92f8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_USB30_MASTER_CLK>,
- <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
- <&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>;
- clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo";
-
- assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <120000000>;
-
- power-domains = <&gcc USB30_GDSC>;
- qcom,select-utmi-as-pipe-clk;
-
- dwc3@f9200000 {
- compatible = "snps,dwc3";
- reg = <0xf9200000 0xcc00>;
- interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- maximum-speed = "high-speed";
- dr_mode = "peripheral";
- };
- };
-
- sdhc_1: sdhci@f9824900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
- &sdc1_rclk_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
- &sdc1_rclk_off>;
-
- regulator-always-on;
- bus-width = <8>;
- non-removable;
-
- status = "disabled";
- };
-
- sdhc_2: sdhci@f98a4900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
-
- cd-gpios = <&tlmm 100 0>;
- bus-width = <4>;
- status = "disabled";
- };
-
- blsp1_uart2: serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
- clock-names = "core", "iface";
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- status = "disabled";
- };
-
- blsp_i2c1: i2c@f9923000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9923000 0x500>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_default>;
- pinctrl-1 = <&i2c1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c2: i2c@f9924000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9924000 0x500>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c2_default>;
- pinctrl-1 = <&i2c2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- /* Somebody was very creative with their numbering scheme downstream... */
-
- blsp_i2c13: i2c@f9927000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9927000 0x500>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c13_default>;
- pinctrl-1 = <&i2c13_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c6: i2c@f9928000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9928000 0x500>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c6_default>;
- pinctrl-1 = <&i2c6_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_uart2: serial@f995e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf995e000 0x1000>;
- interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
- clock-names = "core", "iface";
- clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_default>;
- pinctrl-1 = <&blsp2_uart2_sleep>;
- status = "disabled";
- };
-
- blsp_i2c7: i2c@f9963000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9963000 0x500>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c7_default>;
- pinctrl-1 = <&i2c7_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c5: i2c@f9967000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9967000 0x500>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <100000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c5_default>;
- pinctrl-1 = <&i2c5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- gcc: clock-controller@fc400000 {
- compatible = "qcom,gcc-msm8994";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0xfc400000 0x2000>;
- };
-
- rpm_msg_ram: memory@fc428000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0xfc428000 0x4000>;
- };
-
- restart@fc4ab000 {
- compatible = "qcom,pshold";
- reg = <0xfc4ab000 0x4>;
- };
-
- spmi_bus: spmi@fc4c0000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0xfc4cf000 0x1000>,
- <0xfc4cb000 0x1000>,
- <0xfc4ca000 0x1000>;
- reg-names = "core", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- sfpb_mutex_regs: syscon@fd484000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "syscon";
- reg = <0xfd484000 0x400>;
- };
-
- tlmm: pinctrl@fd510000 {
- compatible = "qcom,msm8994-pinctrl";
- reg = <0xfd510000 0x4000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- gpio-ranges = <&tlmm 0 0 146>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- blsp1_uart2_default: blsp1-uart2-default {
- function = "blsp_uart2";
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp1_uart2_sleep: blsp1-uart2-sleep {
- function = "gpio";
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp2_uart2_default: blsp2-uart2-default {
- function = "blsp_uart8";
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp2_uart2_sleep: blsp2-uart2-sleep {
- function = "gpio";
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- sdc1_clk_on: clk-on {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <6>;
- };
-
- sdc1_clk_off: clk-off {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- sdc1_cmd_on: cmd-on {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <6>;
- };
-
- sdc1_cmd_off: cmd-off {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- sdc1_data_on: data-on {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <6>;
- };
-
- sdc1_data_off: data-off {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- sdc1_rclk_on: rclk-on {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
-
- sdc1_rclk_off: rclk-off {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
-
- i2c1_default: i2c1-default {
- function = "blsp_i2c1";
- pins = "gpio2", "gpio3";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c1_sleep: i2c1-sleep {
- function = "gpio";
- pins = "gpio2", "gpio3";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c2_default: i2c2-default {
- function = "blsp_i2c2";
- pins = "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c2_sleep: i2c2-sleep {
- function = "gpio";
- pins = "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c5_default: i2c5-default {
- /* Don't be fooled! Nobody knows the reason why though... */
- function = "blsp_i2c11";
- pins = "gpio83", "gpio84";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c5_sleep: i2c5-sleep {
- function = "gpio";
- pins = "gpio83", "gpio84";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c6_default: i2c6-default {
- function = "blsp_i2c6";
- pins = "gpio28", "gpio27";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c6_sleep: i2c6-sleep {
- function = "gpio";
- pins = "gpio28", "gpio27";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c7_default: i2c7-default {
- function = "blsp_i2c7";
- pins = "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c7_sleep: i2c7-sleep {
- function = "gpio";
- pins = "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c13_default: i2c13-default {
- /* Not a typo either. */
- function = "blsp_i2c5";
- pins = "gpio23", "gpio24";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c13_sleep: i2c13-sleep {
- function = "gpio";
- pins = "gpio23", "gpio24";
- drive-strength = <2>;
- bias-disable;
- };
-
- sdc2_clk_on: sdc2-clk-on {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- sdc2_clk_off: sdc2-clk-off {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- sdc2_cmd_on: sdc2-cmd-on {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- sdc2_cmd_off: sdc2-cmd-off {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- sdc2_data_on: sdc2-data-on {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- sdc2_data_off: sdc2-data-off {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
- };
-
- smd_rpm: smd {
- compatible = "qcom,smd";
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
- qcom,local-pid = <0>;
- qcom,remote-pid = <6>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8994";
- qcom,smd-channels = "rpm_requests";
+&rpmcc {
+ compatible = "qcom,rpmcc-msm8992";
+};
- rpmcc: rpmcc {
- compatible = "qcom,rpmcc-msm8992";
- #clock-cells = <1>;
- };
- };
- };
- };
+&tcsr_mutex {
+ compatible = "qcom,sfpb-mutex";
+};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+&timer {
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- status = "okay";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
};
+&tlmm {
+ compatible = "qcom,msm8992-pinctrl";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts
deleted file mode 100644
index ed9034b96013..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2020, Konrad Dybcio
- */
-
-/dts-v1/;
-
-#include "msm8994.dtsi"
-#include "pm8994.dtsi"
-#include "pmi8994.dtsi"
-
-/ {
- model = "Microsoft Lumia 950 XL";
- compatible = "microsoft,cityman", "qcom,msm8994";
-
- /*
- * Most Lumia 950XL users use GRUB to load their kernels,
- * hence there is no need for msm-id and friends.
- */
-
- /*
- * This enables graphical output via bootloader-enabled display.
- * acpi=no is required due to WP platforms having ACPI support, but
- * only for Windows-based OSes.
- */
- chosen {
- bootargs = "earlycon=efifb console=efifb acpi=no";
-
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- };
-};
-
-&blsp_i2c1 {
- status = "okay";
-
- rmi4-i2c-dev@4b {
- compatible = "syna,rmi4-i2c";
- reg = <0x4b>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
-
- rmi4-f01@1 {
- reg = <0x01>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f12@12 {
- reg = <0x12>;
- syna,sensor-type = <1>;
- syna,clip-x-low = <0>;
- syna,clip-x-high = <1440>;
- syna,clip-y-low = <0>;
- syna,clip-y-high = <2660>;
- };
- };
-};
-
-&blsp1_uart2 {
- status = "okay";
-};
-
-&blsp2_uart2 {
- status = "okay";
-};
-
-&sdhc1 {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts
new file mode 100644
index 000000000000..d0aaf5750c21
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+#include "msm8994-msft-lumia-octagon.dtsi"
+
+/ {
+ model = "Microsoft Lumia 950 XL";
+ compatible = "microsoft,cityman", "qcom,msm8994";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
new file mode 100644
index 000000000000..3a3790a52a2c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -0,0 +1,909 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for
+ * Microsoft Mobile MSM8994 Octagon Platforms
+ *
+ * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/*
+ * Delete all generic (msm8994.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &cont_splash_mem;
+/delete-node/ &mba_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &smem_mem;
+
+/ {
+ /*
+ * Most Lumia 950/XL users use GRUB to load their kernels,
+ * hence there is no need for msm-id and friends.
+ */
+
+ /*
+ * This enables graphical output via bootloader-enabled display.
+ * acpi=no is required due to WP platforms having ACPI support, but
+ * only for Windows-based OSes.
+ */
+ chosen {
+ bootargs = "earlycon=efifb console=efifb acpi=no";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+
+ divclk4: divclk4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+
+ clock-frequency = <32768>;
+ clock-output-names = "divclk4";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&divclk4_pin_a>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ autorepeat;
+
+ volupkey {
+ label = "Volume Up";
+ gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ camsnapkey {
+ label = "Camera Snapshot";
+ gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ camfocuskey {
+ label = "Camera Focus";
+ gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hall_front_default &hall_back_default>;
+
+ label = "GPIO Hall Effect Sensor";
+
+ hall-front-sensor {
+ label = "Hall Effect Front Sensor";
+ gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+
+ hall-back-sensor {
+ label = "Hall Effect Back Sensor";
+ gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
+ linux,can-disable;
+ };
+ };
+
+ reserved-memory {
+ /*
+ * This device being a WP platform has a very different
+ * memory layout than other Android based devices.
+ * This memory layout is directly copied from the original
+ * device UEFI firmware, and adapted based on observations
+ * using JTAG for the Qualcomm Peripheral Image regions.
+ */
+
+ uefi_mem: memory@200000 {
+ reg = <0 0x200000 0 0x100000>;
+ no-map;
+ };
+
+ mppark_mem: memory@300000 {
+ reg = <0 0x300000 0 0x80000>;
+ no-map;
+ };
+
+ fbpt_mem: memory@380000 {
+ reg = <0 0x380000 0 0x1000>;
+ no-map;
+ };
+
+ dbg2_mem: memory@381000 {
+ reg = <0 0x381000 0 0x4000>;
+ no-map;
+ };
+
+ capsule_mem: memory@385000 {
+ reg = <0 0x385000 0 0x1000>;
+ no-map;
+ };
+
+ tpmctrl_mem: memory@386000 {
+ reg = <0 0x386000 0 0x3000>;
+ no-map;
+ };
+
+ uefiinfo_mem: memory@389000 {
+ reg = <0 0x389000 0 0x1000>;
+ no-map;
+ };
+
+ reset_mem: memory@389000 {
+ reg = <0 0x389000 0 0x1000>;
+ no-map;
+ };
+
+ resuncached_mem: memory@38e000 {
+ reg = <0 0x38e000 0 0x72000>;
+ no-map;
+ };
+
+ disp_mem: memory@400000 {
+ reg = <0 0x400000 0 0x800000>;
+ no-map;
+ };
+
+ uefistack_mem: memory@c00000 {
+ reg = <0 0xc00000 0 0x40000>;
+ no-map;
+ };
+
+ cpuvect_mem: memory@c40000 {
+ reg = <0 0xc40000 0 0x10000>;
+ no-map;
+ };
+
+ rescached_mem: memory@400000 {
+ reg = <0 0xc50000 0 0xb0000>;
+ no-map;
+ };
+
+ tzapps_mem: memory@6500000 {
+ reg = <0 0x6500000 0 0x500000>;
+ no-map;
+ };
+
+ smem_mem: memory@6a00000 {
+ reg = <0 0x6a00000 0 0x200000>;
+ no-map;
+ };
+
+ hyp_mem: memory@6c00000 {
+ reg = <0 0x6c00000 0 0x100000>;
+ no-map;
+ };
+
+ tz_mem: memory@6d00000 {
+ reg = <0 0x6d00000 0 0x160000>;
+ no-map;
+ };
+
+ rfsa_adsp_mem: memory@6e60000 {
+ reg = <0 0x6e60000 0 0x10000>;
+ no-map;
+ };
+
+ rfsa_mpss_mem: memory@6e70000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0x6e70000 0 0x10000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+
+ /*
+ * Value obtained from the device original ACPI DSDT table
+ * MPSS_EFS / SBL
+ */
+ mba_mem: memory@6e80000 {
+ reg = <0 0x6e80000 0 0x180000>;
+ no-map;
+ };
+
+ /*
+ * Peripheral Image loader region begin!
+ * The region reserved for pil is 0x7000000-0xef00000
+ */
+
+ mpss_mem: memory@7000000 {
+ reg = <0 0x7000000 0 0x5a00000>;
+ no-map;
+ };
+
+ adsp_mem: memory@ca00000 {
+ reg = <0 0xca00000 0 0x1800000>;
+ no-map;
+ };
+
+ venus_mem: memory@e200000 {
+ reg = <0 0xe200000 0 0x500000>;
+ no-map;
+ };
+
+ pil_metadata_mem: memory@e700000 {
+ reg = <0 0xe700000 0 0x4000>;
+ no-map;
+ };
+
+ memory@e704000 {
+ reg = <0 0xe704000 0 0x7fc000>;
+ no-map;
+ };
+ /* Peripheral Image loader region end */
+
+ cnss_mem: memory@ef00000 {
+ reg = <0 0xef00000 0 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c1 {
+ status = "okay";
+
+ rmi4-i2c-dev@4b {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x4b>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ syna,clip-x-low = <0>;
+ syna,clip-x-high = <1440>;
+ syna,clip-y-low = <0>;
+ syna,clip-y-high = <2560>;
+ };
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ /*
+ * This device uses the Texas Instruments TAS2553, however the TAS2552 driver
+ * seems to work here. In the future a proper driver might need to
+ * be written for this device.
+ */
+ tas2553: tas2553@40 {
+ compatible = "ti,tas2552";
+ reg = <0x40>;
+
+ vbat-supply = <&vph_pwr>;
+ iovdd-supply = <&vreg_s4a_1p8>;
+ avdd-supply = <&vreg_s4a_1p8>;
+
+ enable-gpio = <&pm8994_gpios 12 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ ak09912: magnetometer@c {
+ compatible = "asahi-kasei,ak09912";
+ reg = <0xc>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vreg_l18a_2p85>;
+ vid-supply = <&vreg_lvs2a_1p8>;
+ };
+
+ zpa2326: barometer@5c {
+ compatible = "murata,zpa2326";
+ reg = <0x5c>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <74 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vreg_lvs2a_1p8>;
+ };
+
+ mpu6050: accelerometer@68 {
+ compatible = "invensense,mpu6500";
+ reg = <0x68>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <64 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vreg_lvs2a_1p8>;
+ vddio-supply = <&vreg_lvs2a_1p8>;
+ };
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ pn547: pn547@28 {
+ compatible = "nxp,pn544-i2c";
+
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_i2c1 {
+ status = "okay";
+
+ sideinteraction: ad7147_captouch@2c {
+ compatible = "ad,ad7147_captouch";
+ reg = <0x2c>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&grip_default>;
+ pinctrl-1 = <&grip_sleep>;
+
+ interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>;
+
+ button_num = <8>;
+ touchpad_num = <0>;
+ wheel_num = <0>;
+ slider_num = <0>;
+
+ vcc-supply = <&vreg_l18a_2p85>;
+ };
+
+ /*
+ * The QPDS-T900/QPDS-T930 is a customized part built for Nokia
+ * by Avago. It is very similar to the Avago APDS-9930 with some
+ * minor differences. In the future a proper driver might need to
+ * be written for this device. For now this works fine.
+ */
+ qpdst900: qpdst900@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&blsp2_i2c5 {
+ status = "okay";
+
+ fm_radio: si4705@11 {
+ compatible = "silabs,si470x";
+ reg = <0x11>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_lpddr_1p1: fan53526a@6c {
+ compatible = "fcs,fan53526";
+ reg = <0x6c>;
+
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vph_pwr>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on; /* Turning off DDR power doesn't sound good. */
+ };
+
+ /* ANX7816 HDMI bridge (needs MDSS HDMI) */
+};
+
+&blsp2_spi4 {
+ status = "okay";
+
+ /*
+ * This device is a Lattice UC120 USB-C PD PHY.
+ * It is actually a Lattice iCE40 FPGA pre-programmed by
+ * the device firmware with a specific bitstream
+ * enabling USB Type C PHY functionality.
+ * Communication is done via a proprietary protocol over SPI.
+ *
+ * TODO: Once a proper driver is available, replace this.
+ */
+ uc120: ice5lp2k@0 {
+ compatible = "lattice,ice40-fpga-mgr";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ cdone-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pmi8994_gpios 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&blsp2_uart2 {
+ status = "okay";
+
+ qca6174_bt: bluetooth {
+ compatible = "qcom,qca6174-bt";
+
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ clocks = <&divclk4>;
+ };
+};
+
+&pm8994_gpios {
+ bt_en_gpios: bt_en_gpios {
+ pinconf {
+ pins = "gpio19";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
+ };
+ };
+
+ divclk4_pin_a: divclk4 {
+ pinconf {
+ pins = "gpio18";
+ function = PMIC_GPIO_FUNC_FUNC2;
+ power-source = <PM8994_GPIO_S4>;
+ bias-disable;
+ };
+ };
+};
+
+&pm8994_pon {
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0 8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ linux,code = <KEY_POWER>;
+ };
+
+ volwnkey {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+};
+
+&pmi8994_gpios {
+ pinctrl-0 = <&hd3ss460_pol &hd3ss460_amsel &hd3ss460_en>;
+ pinctrl-names = "default";
+
+ /*
+ * This device uses a TI HD3SS460 Type-C MUX
+ * As this device has no driver currently,
+ * the configuration for USB Face Up is set-up here.
+ *
+ * TODO: remove once a driver is available
+ * TODO: add VBUS GPIO 5
+ */
+ hd3ss460_pol: pol_low {
+ pins = "gpio8";
+ drive-strength = <3>;
+ bias-pull-down;
+ };
+
+ hd3ss460_amsel: amsel_high {
+ pins = "gpio9";
+ drive-strength = <1>;
+ bias-pull-up;
+ };
+
+ hd3ss460_en: en_high {
+ pins = "gpio10";
+ drive-strength = <1>;
+ bias-pull-up;
+ };
+};
+
+&pmi8994_spmi_regulators {
+ vdd_gfx: s2@1700 {
+ reg = <0x1700 0x100>;
+ regulator-min-microvolt = <980000>;
+ regulator-max-microvolt = <980000>;
+ };
+};
+
+&rpm_requests {
+ /* These values were taken from the original firmware ACPI tables */
+ pm8994_regulators: pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_l1-supply = <&vreg_s1b_1p0>;
+ vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+ vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+ vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+ vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+ vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+ vdd_l8_l16_l30-supply = <&vph_pwr>;
+ vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+ vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+ vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+ vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+ vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+ vdd_l25-supply = <&vreg_s5a_2p15>;
+ vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+ /* S1, S2, S6 and S12 are managed by RPMPD */
+
+ vreg_s3a_1p3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allow-set-load;
+ regulator-system-load = <300000>;
+ };
+
+ vreg_s4a_1p8: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ regulator-system-load = <325000>;
+ };
+
+ vreg_s5a_2p15: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-allow-set-load;
+ regulator-system-load = <325000>;
+ };
+
+ vreg_s7a_1p0: s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ /*
+ * S8 - SPMI-managed VDD_APC0
+ * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1
+ */
+
+ vreg_l1a_1p0: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l2a_1p25: l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-allow-set-load;
+ regulator-system-load = <4160>;
+ };
+
+ vreg_l3a_1p2: l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <80000>;
+ };
+
+ vreg_l4a_1p225: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ /* L5 is inaccessible from RPM */
+
+ vreg_l6a_1p8: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <1000>;
+ };
+
+ /* L7 is inaccessible from RPM */
+
+ vreg_l8a_1p8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l11a_1p2: l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <35000>;
+ };
+
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <50000>;
+ };
+
+ vreg_l13a_2p95: l13 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <22000>;
+ };
+
+ vreg_l14a_1p8: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <52000>;
+ };
+
+ vreg_l15a_1p8: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ vreg_l17a_2p7: l17 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <300000>;
+ };
+
+ vreg_l18a_2p85: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <600000>;
+ };
+
+ vreg_l19a_3p3: l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <500000>;
+ };
+
+ vreg_l20a_2p95: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <570000>;
+ };
+
+ vreg_l21a_2p95: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <800000>;
+ };
+
+ vreg_l22a_3p0: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <150000>;
+ };
+
+ vreg_l23a_2p8: l23 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <80000>;
+ };
+
+ vreg_l24a_3p075: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-allow-set-load;
+ regulator-system-load = <5800>;
+ };
+
+ vreg_l25a_1p1: l25 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <80000>;
+ };
+
+ vreg_l26a_1p0: l26 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l27a_1p05: l27 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <500000>;
+ };
+
+ vreg_l28a_1p0: l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <26000>;
+ };
+
+ vreg_l29a_2p8: l29 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <80000>;
+ };
+
+ vreg_l30a_1p8: l30 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <2500>;
+ };
+
+ vreg_l31a_1p2: l31 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <600000>;
+ };
+
+ vreg_l32a_1p8: l32 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 { };
+
+ vreg_lvs2a_1p8: lvs2 { };
+ };
+
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ vreg_s1b_1p0: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ vph_pwr_bbyp: boost-bypass {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+};
+
+&sdhc1 {
+ status = "okay";
+
+ /*
+ * This device is shipped with HS400 capabable eMMCs
+ * However various brands have been used in various product batches,
+ * including a Samsung eMMC (BGND3R) which features a quirk with HS400.
+ * Set the speed to HS200 as a safety measure.
+ */
+ mmc-hs200-1_8v;
+};
+
+&sdhc2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+
+ cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>;
+};
+
+&tlmm {
+ grip_default: grip-default {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ grip_sleep: grip-sleep {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ hall_front_default: hall-front-default {
+ pins = "gpio42";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ hall_back_default: hall-back-default {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts
new file mode 100644
index 000000000000..b5e90c85aaf6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z3+/Z4";
+ compatible = "sony,ivy-row", "qcom,msm8994";
+};
+
+&pm8994_l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+};
+
+&pm8994_l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+};
+
+/delete-node/ &pm8994_l19;
+/delete-node/ &pm8994_l32;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts
new file mode 100644
index 000000000000..a1d1a075941a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z4 Tablet (LTE)";
+ compatible = "sony,karin-row", "qcom,msm8994";
+};
+
+&blsp2_i2c5 {
+ /*
+ * TI LP8557 backlight driver @ 2c
+ * AD AD7146 touch controller @ 2f
+ * sii8620 HDMI/MHL bridge @ 72 (kitakami-common)
+ */
+};
+
+&pm8994_l3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+};
+
+&pm8994_l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+};
+
+&pm8994_l22 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+};
+
+&pm8994_l25 {
+ regulator-min-microvolt = <1037500>;
+ regulator-max-microvolt = <1037500>;
+};
+
+/delete-node/ &pm8994_l32;
+/* Z4 tablets use a different touchscreen. */
+/delete-node/ &touchscreen;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts
new file mode 100644
index 000000000000..1385956a69f3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z5 Premium";
+ compatible = "sony,satsuki-row", "qcom,msm8994";
+};
+
+&pm8994_l14 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
index 5d6bbbf6c119..d3ba9867a369 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
- * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
/dts-v1/;
@@ -11,3 +11,5 @@
model = "Sony Xperia Z5";
compatible = "sony,sumire-row", "qcom,msm8994";
};
+
+/delete-node/ &pm8994_l19;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts
new file mode 100644
index 000000000000..f129479bbf95
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z5 Compact";
+ compatible = "sony,suzuran-row", "qcom,msm8994";
+};
+
+&pm8994_l14 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+};
+
+/delete-node/ &pm8994_l19;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 791f254ac3f8..48de66bf19c4 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
- * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
#include "msm8994.dtsi"
@@ -11,8 +11,17 @@
/ {
/* required for bootloader to select correct board */
- qcom,msm-id = <0xcf 0x20001>;
+
+ /*
+ * We support MSM8994 v2 (0x20000) and v2.1 (0x20001).
+ * The V1 chip (0x0 and 0x10000) is significantly different
+ * and requires driver-side changes (including CPR, be warned!!).
+ * Besides that, it's very rare.
+ */
+ qcom,msm-id = <207 0x20000>, <207 0x20001>;
+ /* We only use pm8994+pmi8994. */
qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+ /* This property is shared across all kitakami devices. */
qcom,board-id = <8 0>;
/* Kitakami firmware doesn't support PSCI */
@@ -63,53 +72,29 @@
};
reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
/* This is for getting crash logs using Android downstream kernels */
ramoops@1fe00000 {
compatible = "ramoops";
- reg = <0x0 0x1fe00000 0x0 0x200000>;
+ reg = <0 0x1fe00000 0 0x200000>;
console-size = <0x100000>;
record-size = <0x10000>;
ftrace-size = <0x10000>;
pmsg-size = <0x80000>;
};
- continuous_splash: framebuffer@3401000{
- reg = <0x0 0x3401000 0x0 0x2200000>;
- no-map;
- };
-
- dfps_data_mem: dfps_data_mem@3400000 {
- reg = <0x0 0x3400000 0x0 0x1000>;
- no-map;
- };
-
- peripheral_region: peripheral_region@7400000 {
- reg = <0x0 0x7400000 0x0 0x1c00000>;
- no-map;
- };
-
- modem_region: modem_region@9000000 {
- reg = <0x0 0x9000000 0x0 0x5a00000>;
- no-map;
- };
-
- tzapp: modem_region@ea00000 {
- reg = <0x0 0xea00000 0x0 0x1900000>;
+ fb_region: fb_region@40000000 {
+ reg = <0 0x40000000 0 0x1000000>;
no-map;
};
- fb_region: fb_region@40000000 {
- reg = <0x00 0x40000000 0x00 0x1000000>;
+ tzapp: memory@c7800000 {
+ reg = <0 0xc7800000 0 0x1900000>;
no-map;
};
};
};
-&blsp_spi0 {
+&blsp1_spi1 {
status = "okay";
/* FPC fingerprint reader */
@@ -117,94 +102,330 @@
/* I2C1 is disabled on this board */
-&blsp_i2c2 {
+&blsp1_i2c2 {
status = "okay";
+ clock-frequency = <355000>;
- /* NXP NFC */
+ /* NXP PN547 NFC */
};
-&blsp_i2c4 {
+&blsp1_i2c4 {
status = "okay";
+ clock-frequency = <355000>;
/* Empty but active */
};
-&blsp_i2c5 {
+&blsp1_i2c6 {
status = "okay";
+ clock-frequency = <355000>;
- /* SMB1357 charger and sii8620 HDMI/MHL bridge */
-};
+ touchscreen: rmi4-i2c-dev@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
-&blsp_i2c6 {
- status = "okay";
+ interrupt-parent = <&tlmm>;
+ interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+ vdd-supply = <&pm8994_l22>;
+ vio-supply = <&pm8994_s4>;
+
+ syna,reset-delay-ms = <220>;
+ syna,startup-delay-ms = <220>;
- /* Synaptics touchscreen */
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
};
&blsp1_uart2 {
status = "okay";
};
+&blsp2_i2c5 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ /* sii8620 HDMI/MHL bridge */
+};
+
&blsp2_uart2 {
status = "okay";
};
+/*
+ * Kitakami bootloader only turns cont_splash on when it detects
+ * specific downstream MDSS/backlight nodes in the active DTB.
+ * One way to use that framebuffer is to load a secondary instance of
+ * LK with the downstream DTB appended and then, only from there, load
+ * mainline Linux.
+ */
+&cont_splash_mem {
+ reg = <0 0x3401000 0 0x2200000>;
+};
+
+&pmi8994_spmi_regulators {
+ /*
+ * Yeah, this one *is* managed by RPMPD, but also needs
+ * to be hacked up as a-o due to the GPU device only accepting a single
+ * power domain.. which still isn't enough and forces us to bind
+ * OXILI_CX and OXILI_GX together!
+ */
+ vdd_gfx: s2@1700 {
+ reg = <0x1700 0x100>;
+ regulator-name = "VDD_GFX";
+ regulator-min-microvolt = <980000>;
+ regulator-max-microvolt = <980000>;
+
+ /* hack until we rig up the gpu consumer */
+ regulator-always-on;
+ };
+};
+
&rpm_requests {
pm8994_regulators: pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
- vdd_l1-supply = <&pm8994_s1>;
- vdd_l2_26_28-supply = <&pm8994_s3>;
- vdd_l3_11-supply = <&pm8994_s3>;
- vdd_l4_27_31-supply = <&pm8994_s3>;
- vdd_l5_7-supply = <&pm8994_s3>;
- vdd_l6_12_32-supply = <&pm8994_s5>;
- vdd_l8_16_30-supply = <&vreg_vph_pwr>;
- vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
- vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
- vdd_l14_15-supply = <&pm8994_s5>;
- vdd_l17_29-supply = <&vreg_vph_pwr>;
- vdd_l20_21-supply = <&vreg_vph_pwr>;
- vdd_l25-supply = <&pm8994_s5>;
- vdd_lvs1_2 = <&pm8994_s4>;
-
- pm8994_s1: s1 {};
- pm8994_s2: s2 {};
- pm8994_s3: s3 {};
- pm8994_s4: s4 {};
- pm8994_s5: s5 {};
- pm8994_s6: s6 {};
- pm8994_s7: s7 {};
-
- pm8994_l1: l1 {};
- pm8994_l2: l2 {};
- pm8994_l3: l3 {};
- pm8994_l4: l4 {};
- pm8994_l6: l6 {};
- pm8994_l8: l8 {};
- pm8994_l9: l9 {};
- pm8994_l10: l10 {};
- pm8994_l11: l11 {};
- pm8994_l12: l12 {};
- pm8994_l13: l13 {};
- pm8994_l14: l14 {};
- pm8994_l15: l15 {};
- pm8994_l16: l16 {};
- pm8994_l17: l17 {};
- pm8994_l18: l18 {};
- pm8994_l19: l19 {};
- pm8994_l20: l20 {};
- pm8994_l21: l21 {};
- pm8994_l22: l22 {};
- pm8994_l23: l23 {};
- pm8994_l24: l24 {};
- pm8994_l25: l25 {};
- pm8994_l26: l26 {};
- pm8994_l27: l27 {};
- pm8994_l28: l28 {};
- pm8994_l29: l29 {};
- pm8994_l30: l30 {};
- pm8994_l31: l31 {};
- pm8994_l32: l32 {};
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_l1-supply = <&pmi8994_s1>;
+ vdd_l2_l26_l28-supply = <&pm8994_s3>;
+ vdd_l3_l11-supply = <&pm8994_s3>;
+ vdd_l4_l27_l31-supply = <&pm8994_s3>;
+ vdd_l5_l7-supply = <&pm8994_s5>;
+ vdd_l6_l12_l32-supply = <&pm8994_s5>;
+ vdd_l8_l16_l30-supply = <&vph_pwr>;
+ vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>;
+ vdd_l13_l19_l23_l24-supply = <&pmi8994_bby>;
+ vdd_l14_l15-supply = <&pm8994_s5>;
+ vdd_l17_l29-supply = <&pmi8994_bby>;
+ vdd_l20_l21-supply = <&pmi8994_bby>;
+ vdd_l25-supply = <&pm8994_s3>;
+ vdd_lvs1_lvs2-supply = <&pm8994_s4>;
+
+ /* S1, S2, S6 and S12 are managed by RPMPD */
+
+ pm8994_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8994_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ regulator-system-load = <325000>;
+ };
+
+ pm8994_s5: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ pm8994_s7: s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ /*
+ * S8 - SPMI-managed VDD_APC0
+ * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1
+ */
+
+ pm8994_l1: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l2: l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l3: l3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ pm8994_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ /* L5 is inaccessible from RPM */
+
+ pm8994_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ /* L7 is inaccessible from RPM */
+
+ pm8994_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l11: l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8994_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l17: l17 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8994_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ pm8994_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8994_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <570000>;
+ };
+
+ pm8994_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-allow-set-load;
+ regulator-system-load = <800000>;
+ };
+
+ pm8994_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8994_l23: l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8994_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ pm8994_l25: l25 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l26: l26 {
+ regulator-min-microvolt = <987500>;
+ regulator-max-microvolt = <987500>;
+ };
+
+ pm8994_l27: l27 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l28: l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l29: l29 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l30: l30 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l31: l31 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ regulator-system-load = <10000>;
+ };
+
+ pm8994_l32: l32 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
pm8994_lvs1: lvs1 {};
pm8994_lvs2: lvs2 {};
@@ -213,22 +434,34 @@
pmi8994_regulators: pmi8994-regulators {
compatible = "qcom,rpm-pmi8994-regulators";
- pmi8994_s1: s1 {};
- pmi8994_s2: s2 {};
- pmi8994_s3: s3 {};
- pmi8994_bby: boost-bypass {};
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3600000>;
+ };
};
};
&sdhc1 {
- /* There is an issue with the eMMC causing permanent
+ /*
+ * There is an issue with the eMMC causing permanent
* damage to the card if a quirk isn't addressed.
* Until it's fixed, disable the MMC so as not to brick
* devices.
*/
status = "disabled";
- /* Downstream pushes 2.95V to the sdhci device,
+ /*
+ * Downstream pushes 2.95V to the sdhci device,
* but upstream driver REALLY wants to make vmmc 1.8v
* cause of the hs400-1_8v mode. MMC works fine without
* that regulator, so let's not use it for now.
@@ -238,3 +471,27 @@
* vqmmc-supply = <&pm8994_s4>;
*/
};
+
+&sdhc2 {
+ status = "okay";
+
+ cd-gpios = <&tlmm 100 0>;
+ vmmc-supply = <&pm8994_l21>;
+ vqmmc-supply = <&pm8994_l13>;
+};
+
+&tlmm {
+ ts_int_active: ts-int-active {
+ pins = "gpio42";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ ts_reset_active: ts-reset-active {
+ pins = "gpio109";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 6e083a2f690b..f49d442d2edf 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
/ {
interrupt-parent = <&intc>;
@@ -131,11 +132,11 @@
cpu = <&CPU5>;
};
- core2 {
+ cpu6_map: core2 {
cpu = <&CPU6>;
};
- core3 {
+ cpu7_map: core3 {
cpu = <&CPU7>;
};
};
@@ -154,6 +155,12 @@
reg = <0 0 0 0>;
};
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x80>;
+ #hwlock-cells = <1>;
+ };
+
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
@@ -169,8 +176,51 @@
#size-cells = <2>;
ranges;
+ dfps_data_mem: dfps_data_mem@3400000 {
+ reg = <0 0x03400000 0 0x1000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@3800000 {
+ reg = <0 0x03800000 0 0x2400000>;
+ no-map;
+ };
+
smem_mem: smem_region@6a00000 {
- reg = <0x0 0x6a00000 0x0 0x200000>;
+ reg = <0 0x06a00000 0 0x200000>;
+ no-map;
+ };
+
+ mpss_mem: memory@7000000 {
+ reg = <0 0x07000000 0 0x5a00000>;
+ no-map;
+ };
+
+ peripheral_region: memory@ca00000 {
+ reg = <0 0x0ca00000 0 0x1f00000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@c6400000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xc6400000 0 0x180000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+
+ mba_mem: memory@c6700000 {
+ reg = <0 0xc6700000 0 0x100000>;
+ no-map;
+ };
+
+ audio_mem: memory@c7000000 {
+ reg = <0 0xc7000000 0 0x800000>;
+ no-map;
+ };
+
+ adsp_mem: memory@c9400000 {
+ reg = <0 0xc9400000 0 0x3f00000>;
no-map;
};
};
@@ -192,6 +242,35 @@
compatible = "qcom,rpmcc-msm8994";
#clock-cells = <1>;
};
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8994-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <1>;
+ };
+ rpmpd_opp_svs_krait: opp2 {
+ opp-level = <2>;
+ };
+ rpmpd_opp_svs_soc: opp3 {
+ opp-level = <3>;
+ };
+ rpmpd_opp_nom: opp4 {
+ opp-level = <4>;
+ };
+ rpmpd_opp_turbo: opp5 {
+ opp-level = <5>;
+ };
+ rpmpd_opp_super_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
};
};
};
@@ -203,6 +282,55 @@
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc {
#address-cells = <1>;
@@ -385,7 +513,7 @@
status = "disabled";
};
- blsp_i2c1: i2c@f9923000 {
+ blsp1_i2c1: i2c@f9923000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9923000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -393,6 +521,8 @@
<&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <400000>;
+ dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_default>;
pinctrl-1 = <&i2c1_sleep>;
@@ -401,7 +531,7 @@
status = "disabled";
};
- blsp_spi0: spi@f9923000 {
+ blsp1_spi1: spi@f9923000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0xf9923000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -412,21 +542,21 @@
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_spi0_default>;
- pinctrl-1 = <&blsp1_spi0_sleep>;
+ pinctrl-0 = <&blsp1_spi1_default>;
+ pinctrl-1 = <&blsp1_spi1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp_i2c2: i2c@f9924000 {
+ blsp1_i2c2: i2c@f9924000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9924000 0x500>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
- clock-frequency = <355000>;
+ clock-frequency = <400000>;
dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
@@ -439,14 +569,16 @@
/* I2C3 doesn't exist */
- blsp_i2c4: i2c@f9926000 {
+ blsp1_i2c4: i2c@f9926000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9926000 0x500>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
clock-names = "iface", "core";
- clock-frequency = <355000>;
+ clock-frequency = <400000>;
+ dmas = <&blsp1_dma 18>, <&blsp1_dma 19>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_default>;
pinctrl-1 = <&i2c4_sleep>;
@@ -455,31 +587,32 @@
status = "disabled";
};
- blsp2_dma: dma-controller@f9944000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0xf9944000 0x19000>;
- interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- qcom,controlled-remotely;
- num-channels = <18>;
- qcom,num-ees = <4>;
+ blsp1_i2c5: i2c@f9927000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0xf9927000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <400000>;
+ dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c5_default>;
+ pinctrl-1 = <&i2c5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
- /* According to downstream kernels, i2c6
- * comes before i2c5 address-wise...
- */
-
- blsp_i2c6: i2c@f9928000 {
+ blsp1_i2c6: i2c@f9928000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9928000 0x500>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
clock-names = "iface", "core";
- clock-frequency = <355000>;
+ clock-frequency = <400000>;
dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
@@ -490,10 +623,23 @@
status = "disabled";
};
+ blsp2_dma: dma-controller@f9944000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0xf9944000 0x19000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <18>;
+ qcom,num-ees = <4>;
+ };
+
blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
- interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
@@ -505,7 +651,43 @@
status = "disabled";
};
- blsp_i2c5: i2c@f9967000 {
+ blsp2_i2c1: i2c@f9963000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0xf9963000 0x500>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <400000>;
+ dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c7_default>;
+ pinctrl-1 = <&i2c7_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_spi4: spi@f9966000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0xf9966000 0x500>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ spi-max-frequency = <19200000>;
+ dmas = <&blsp2_dma 18>, <&blsp2_dma 19>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_spi10_default>;
+ pinctrl-1 = <&blsp2_spi10_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_i2c5: i2c@f9967000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9967000 0x500>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
@@ -516,8 +698,8 @@
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c5_default>;
- pinctrl-1 = <&i2c5_sleep>;
+ pinctrl-0 = <&i2c11_default>;
+ pinctrl-1 = <&i2c11_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -588,16 +770,18 @@
blsp2_uart2_default: blsp2-uart2-default {
function = "blsp_uart8";
- pins = "gpio45", "gpio46";
- drive-strength = <2>;
+ pins = "gpio45", "gpio46",
+ "gpio47", "gpio48";
+ drive-strength = <16>;
bias-disable;
};
blsp2_uart2_sleep: blsp2-uart2-sleep {
function = "gpio";
- pins = "gpio45", "gpio46";
+ pins = "gpio45", "gpio46",
+ "gpio47", "gpio48";
drive-strength = <2>;
- bias-pull-down;
+ bias-disable;
};
i2c1_default: i2c1-default {
@@ -671,7 +855,56 @@
bias-disable;
};
- blsp1_spi0_default: blsp1-spi0-default {
+ i2c7_default: i2c7-default {
+ function = "blsp_i2c7";
+ pins = "gpio44", "gpio43";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c7_sleep: i2c7-sleep {
+ function = "gpio";
+ pins = "gpio44", "gpio43";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_spi10_default: blsp2-spi10-default {
+ default {
+ function = "blsp_spi10";
+ pins = "gpio53", "gpio54", "gpio55";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+ cs {
+ function = "gpio";
+ pins = "gpio55";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp2_spi10_sleep: blsp2-spi10-sleep {
+ pins = "gpio53", "gpio54", "gpio55";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c11_default: i2c11-default {
+ function = "blsp_i2c11";
+ pins = "gpio83", "gpio84";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c11_sleep: i2c11-sleep {
+ function = "gpio";
+ pins = "gpio83", "gpio84";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_spi1_default: blsp1-spi1-default {
default {
function = "blsp_spi1";
pins = "gpio0", "gpio1", "gpio3";
@@ -686,7 +919,7 @@
};
};
- blsp1_spi0_sleep: blsp1-spi0-sleep {
+ blsp1_spi1_sleep: blsp1-spi1-sleep {
pins = "gpio0", "gpio1", "gpio3";
drive-strength = <2>;
bias-disable;
@@ -776,13 +1009,7 @@
};
};
- tcsr_mutex: hwlock {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_regs 0 0x80>;
- #hwlock-cells = <1>;
- };
-
- timer {
+ timer: timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 0xff08>,
<GIC_PPI 3 0xff08>,
@@ -790,9 +1017,9 @@
<GIC_PPI 1 0xff08>;
};
- vreg_vph_pwr: vreg-vph-pwr {
+ vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
+ regulator-name = "vph_pwr";
regulator-min-microvolt = <3600000>;
regulator-max-microvolt = <3600000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 7eef07e73e25..ce430ba9c118 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -750,6 +750,8 @@
ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+ device_type = "pci";
+
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
@@ -802,6 +804,8 @@
ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+ device_type = "pci";
+
interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 00d84fb21798..b500f24d47bc 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -74,6 +74,14 @@
cpu-idle-states = <&BIG_CPU_SLEEP_1>;
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pm8005_lsid1 {
pm8005-regulators {
compatible = "qcom,pm8005-regulators";
@@ -295,6 +303,14 @@
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
};
+&ufshc {
+ status = "okay";
+};
+
+&ufsphy {
+ status = "okay";
+};
+
&usb3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index cec42437b302..c1ef0c71d5f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -106,6 +106,14 @@
// status = "okay";
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pm8005_lsid1 {
pm8005-regulators {
compatible = "qcom,pm8005-regulators";
@@ -345,6 +353,7 @@
};
&ufshc {
+ status = "okay";
vcc-supply = <&vreg_l20a_2p95>;
vccq-supply = <&vreg_l26a_1p2>;
vccq2-supply = <&vreg_s4a_1p8>;
@@ -354,6 +363,7 @@
};
&ufsphy {
+ status = "okay";
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
vddp-ref-clk-supply = <&vreg_l26a_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
deleted file mode 100644
index 7c222cbf19d9..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
-
-&tlmm {
- sdc2_clk_on: sdc2_clk_on {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <16>; /* 16 mA */
- };
- };
-
- sdc2_clk_off: sdc2_clk_off {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_cmd_on: sdc2_cmd_on {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 mA */
- };
- };
-
- sdc2_cmd_off: sdc2_cmd_off {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_data_on: sdc2_data_on {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 mA */
- };
- };
-
- sdc2_data_off: sdc2_data_off {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_cd_on: sdc2_cd_on {
- mux {
- pins = "gpio95";
- function = "gpio";
- };
-
- config {
- pins = "gpio95";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_cd_off: sdc2_cd_off {
- mux {
- pins = "gpio95";
- function = "gpio";
- };
-
- config {
- pins = "gpio95";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- blsp1_uart3_on: blsp1_uart3_on {
- tx {
- pins = "gpio45";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio46";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
-
- cts {
- pins = "gpio47";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
-
- rfr {
- pins = "gpio48";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index ebdaaf1dfca4..1f2e93aa6553 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -133,6 +133,7 @@
compatible = "qcom,kryo280";
reg = <0x0 0x0>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
@@ -152,6 +153,7 @@
compatible = "qcom,kryo280";
reg = <0x0 0x1>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L1_I_1: l1-icache {
@@ -167,6 +169,7 @@
compatible = "qcom,kryo280";
reg = <0x0 0x2>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L1_I_2: l1-icache {
@@ -182,6 +185,7 @@
compatible = "qcom,kryo280";
reg = <0x0 0x3>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L1_I_3: l1-icache {
@@ -197,6 +201,7 @@
compatible = "qcom,kryo280";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
@@ -216,6 +221,7 @@
compatible = "qcom,kryo280";
reg = <0x0 0x101>;
enable-method = "psci";
+ capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L1_I_101: l1-icache {
@@ -231,6 +237,7 @@
compatible = "qcom,kryo280";
reg = <0x0 0x102>;
enable-method = "psci";
+ capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L1_I_102: l1-icache {
@@ -246,6 +253,7 @@
compatible = "qcom,kryo280";
reg = <0x0 0x103>;
enable-method = "psci";
+ capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L1_I_103: l1-icache {
@@ -379,43 +387,43 @@
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
- opp-level = <16>;
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
- opp-level = <32>;
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
- opp-level = <48>;
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
- opp-level = <64>;
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
- opp-level = <128>;
+ opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
- opp-level = <192>;
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
- opp-level = <256>;
+ opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
- opp-level = <320>;
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
- opp-level = <384>;
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_plus: opp10 {
- opp-level = <512>;
+ opp-level = <RPM_SMD_LEVEL_BINNING>;
};
};
};
@@ -937,6 +945,7 @@
num-lanes = <1>;
phys = <&pciephy>;
phy-names = "pciephy";
+ status = "disabled";
ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>,
<0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
@@ -962,11 +971,12 @@
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
- phy@1c06000 {
+ pcie_phy: phy@1c06000 {
compatible = "qcom,msm8998-qmp-pcie-phy";
reg = <0x01c06000 0x18c>;
#address-cells = <1>;
#size-cells = <1>;
+ status = "disabled";
ranges;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
@@ -999,6 +1009,7 @@
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_GDSC>;
+ status = "disabled";
#reset-cells = <1>;
clock-names =
@@ -1038,6 +1049,7 @@
reg = <0x01da7000 0x18c>;
#address-cells = <1>;
#size-cells = <1>;
+ status = "disabled";
ranges;
clock-names =
@@ -1073,6 +1085,278 @@
#gpio-cells = <0x2>;
interrupt-controller;
#interrupt-cells = <0x2>;
+
+ sdc2_clk_on: sdc2_clk_on {
+ config {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_clk_off: sdc2_clk_off {
+ config {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_cmd_on: sdc2_cmd_on {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_cmd_off: sdc2_cmd_off {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_data_on: sdc2_data_on {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_data_off: sdc2_data_off {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_cd_on: sdc2_cd_on {
+ mux {
+ pins = "gpio95";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio95";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_cd_off: sdc2_cd_off {
+ mux {
+ pins = "gpio95";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio95";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ blsp1_uart3_on: blsp1_uart3_on {
+ tx {
+ pins = "gpio45";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio46";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cts {
+ pins = "gpio47";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rfr {
+ pins = "gpio48";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_i2c1_default: blsp1-i2c1-default {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c2_default: blsp1-i2c2-default {
+ pins = "gpio32", "gpio33";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+ pins = "gpio32", "gpio33";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c3_default: blsp1-i2c3-default {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c4_default: blsp1-i2c4-default {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c4_sleep: blsp1-i2c4-sleep {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c5_default: blsp1-i2c5-default {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c5_sleep: blsp1-i2c5-sleep {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c6_default: blsp1-i2c6-default {
+ pins = "gpio43", "gpio44";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+ pins = "gpio43", "gpio44";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+ blsp2_i2c1_default: blsp2-i2c1-default {
+ pins = "gpio55", "gpio56";
+ function = "blsp_i2c7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c1_sleep: blsp2-i2c1-sleep {
+ pins = "gpio55", "gpio56";
+ function = "blsp_i2c7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c2_default: blsp2-i2c2-default {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c3_default: blsp2-i2c3-default {
+ pins = "gpio51", "gpio52";
+ function = "blsp_i2c9";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+ pins = "gpio51", "gpio52";
+ function = "blsp_i2c9";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c4_default: blsp2-i2c4-default {
+ pins = "gpio67", "gpio68";
+ function = "blsp_i2c10";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c4_sleep: blsp2-i2c4-sleep {
+ pins = "gpio67", "gpio68";
+ function = "blsp_i2c10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c5_default: blsp2-i2c5-default {
+ pins = "gpio60", "gpio61";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+ pins = "gpio60", "gpio61";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp2_i2c6_default: blsp2-i2c6-default {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
remoteproc_mss: remoteproc@4080000 {
@@ -1789,6 +2073,11 @@
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c1_default>;
+ pinctrl-1 = <&blsp1_i2c1_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1804,6 +2093,11 @@
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c2_default>;
+ pinctrl-1 = <&blsp1_i2c2_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1819,6 +2113,11 @@
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c3_default>;
+ pinctrl-1 = <&blsp1_i2c3_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1834,6 +2133,11 @@
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c4_default>;
+ pinctrl-1 = <&blsp1_i2c4_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1849,6 +2153,11 @@
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c5_default>;
+ pinctrl-1 = <&blsp1_i2c5_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1864,6 +2173,11 @@
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c6_default>;
+ pinctrl-1 = <&blsp1_i2c6_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1871,6 +2185,19 @@
#size-cells = <0>;
};
+ blsp2_dma: dma@c184000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x0c184000 0x25000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <18>;
+ qcom,num-ees = <4>;
+ };
+
blsp2_uart1: serial@c1b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0c1b0000 0x1000>;
@@ -1881,7 +2208,7 @@
status = "disabled";
};
- blsp2_i2c0: i2c@c1b5000 {
+ blsp2_i2c1: i2c@c1b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b5000 0x600>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
@@ -1889,6 +2216,11 @@
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c1_default>;
+ pinctrl-1 = <&blsp2_i2c1_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1896,7 +2228,7 @@
#size-cells = <0>;
};
- blsp2_i2c1: i2c@c1b6000 {
+ blsp2_i2c2: i2c@c1b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b6000 0x600>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -1904,6 +2236,11 @@
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c2_default>;
+ pinctrl-1 = <&blsp2_i2c2_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1911,7 +2248,7 @@
#size-cells = <0>;
};
- blsp2_i2c2: i2c@c1b7000 {
+ blsp2_i2c3: i2c@c1b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b7000 0x600>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -1919,6 +2256,11 @@
clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c3_default>;
+ pinctrl-1 = <&blsp2_i2c3_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1926,7 +2268,7 @@
#size-cells = <0>;
};
- blsp2_i2c3: i2c@c1b8000 {
+ blsp2_i2c4: i2c@c1b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b8000 0x600>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
@@ -1934,6 +2276,11 @@
clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c4_default>;
+ pinctrl-1 = <&blsp2_i2c4_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1941,7 +2288,7 @@
#size-cells = <0>;
};
- blsp2_i2c4: i2c@c1b9000 {
+ blsp2_i2c5: i2c@c1b9000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b9000 0x600>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
@@ -1949,6 +2296,11 @@
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c5_default>;
+ pinctrl-1 = <&blsp2_i2c5_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -1956,7 +2308,7 @@
#size-cells = <0>;
};
- blsp2_i2c5: i2c@c1ba000 {
+ blsp2_i2c6: i2c@c1ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1ba000 0x600>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -1964,6 +2316,11 @@
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c6_default>;
+ pinctrl-1 = <&blsp2_i2c6_sleep>;
clock-frequency = <400000>;
status = "disabled";
@@ -2110,5 +2467,3 @@
};
};
};
-
-#include "msm8998-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index a53eccf2b695..bdc76d504b78 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -11,7 +11,7 @@
/ {
thermal-zones {
- pm8150 {
+ pm8150-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
@@ -97,6 +97,16 @@
};
};
+ pm8150_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150_rtc: rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index e112e8876db6..b21e56a46145 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -10,7 +10,7 @@
/ {
thermal-zones {
- pm8150b {
+ pm8150b-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
@@ -95,6 +95,16 @@
};
};
+ pm8150b_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150b_gpios: gpio@c000 {
compatible = "qcom,pm8150b-gpio";
reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index 62139538b7d9..52f094a2b713 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -10,7 +10,7 @@
/ {
thermal-zones {
- pm8150l {
+ pm8150l-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
@@ -89,6 +89,16 @@
};
};
+ pm8150l_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150l_gpios: gpio@c000 {
compatible = "qcom,pm8150l-gpio";
reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 5ffdf37d8e31..c3876c82c874 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -6,7 +6,7 @@
/ {
thermal-zones {
- pm8994 {
+ pm8994-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -43,7 +43,7 @@
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pon@800 {
+ pm8994_pon: pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 67283d60e2ac..6f5bb6b37ec2 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -9,7 +9,7 @@
/ {
thermal-zones {
- pm8998 {
+ pm8998-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index d016b12967eb..d230c510d4b7 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -30,11 +30,15 @@
compatible = "qcom,pmi8998-lab-ibb";
ibb: ibb {
- interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sc-err", "ocp";
};
lab: lab {
- interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sc-err", "ocp";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index ff4005186895..172be177fc8f 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -8,7 +8,7 @@
/ {
thermal-zones {
- pms405 {
+ pms405-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index ce22d4fa383e..26a4a5a6871e 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -7,6 +7,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include "sm8250.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
@@ -40,6 +42,17 @@
regulator-always-on;
};
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&lt9611_out>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -66,6 +79,98 @@
};
+ lt9611_1v2: lt9611-vdd12-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "LT9611_1V2";
+
+ vin-supply = <&vdc_3v3>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ lt9611_3v3: lt9611-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "LT9611_3V3";
+
+ vin-supply = <&vdc_3v3>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ thermal-zones {
+ conn-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ pm8150l-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-msm-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ wifi-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <52000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
vbat: vbat-regulator {
compatible = "regulator-fixed";
regulator-name = "VBAT";
@@ -87,7 +192,7 @@
vdc_3v3: vdc-3v3-regulator {
compatible = "regulator-fixed";
regulator-name = "VDC_3V3";
- vin-supply = <&dc12v>;
+ vin-supply = <&vreg_l11c_3p3>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
@@ -120,6 +225,11 @@
};
};
+&adsp {
+ status = "okay";
+ firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
&apps_rsc {
pm8009-rpmh-regulators {
compatible = "qcom,pm8009-rpmh-regulators";
@@ -406,6 +516,42 @@
};
};
+&cdsp {
+ status = "okay";
+ firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vreg_l9a_1p2>;
+
+#if 0
+ qcom,dual-dsi-mode;
+ qcom,master-dsi;
+#endif
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&lt9611_a>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vreg_l5a_0p88>;
+};
+
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sm8250/a650_zap.mbn";
+ };
+};
+
/* LS-I2C0 */
&i2c4 {
status = "okay";
@@ -413,6 +559,55 @@
&i2c5 {
status = "okay";
+ clock-frequency = <400000>;
+
+ lt9611_codec: hdmi-bridge@2b {
+ compatible = "lontium,lt9611uxc";
+ reg = <0x2b>;
+ #sound-dai-cells = <1>;
+
+ interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&lt9611_1v2>;
+ vcc-supply = <&lt9611_3v3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lt9611_a: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+#if 0
+ port@1 {
+ reg = <1>;
+
+ lt9611_b: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+#endif
+
+ port@2 {
+ reg = <2>;
+
+ lt9611_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+
+ };
+ };
};
/* LS-I2C1 */
@@ -420,6 +615,88 @@
status = "okay";
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
+&pm8150_adc {
+ xo-therm@4c {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ wifi-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ wifi-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+};
+
+&pcie0_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie1 {
+ status = "okay";
+ perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+};
+
+&pcie1_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie2 {
+ status = "okay";
+ perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_default_state>;
+};
+
+&pcie2_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
&pm8150_gpios {
gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
gpio-line-names =
@@ -435,6 +712,25 @@
"GPIO_10_P"; /* Green LED */
};
+&pm8150b_adc {
+ conn-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150b_adc_tm {
+ status = "okay";
+
+ conn-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pm8150b_gpios {
gpio-line-names =
"NC",
@@ -451,6 +747,38 @@
"NC";
};
+&pm8150l_adc {
+ skin-msm-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pm8150l-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150l_adc_tm {
+ status = "okay";
+
+ skin-msm-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pm8150l-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pm8150l_gpios {
gpio-line-names =
"NC",
@@ -465,6 +793,15 @@
"PM_GPIO-B",
"NC",
"PM3003A_MODE";
+
+ lt9611_rst_pin: lt9611-rst-pin {
+ pins = "gpio5";
+ function = "normal";
+
+ output-high;
+ input-disable;
+ power-source = <0>;
+ };
};
&pm8150_rtc {
@@ -483,6 +820,35 @@
status = "okay";
};
+&q6afedai {
+ qi2s@16 {
+ reg = <16>;
+ qcom,sd-lines = <0 1 2 3>;
+ };
+};
+
+/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+ qi2s@20 {
+ reg = <20>;
+ qcom,sd-lines = <0>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
&sdhc_2 {
status = "okay";
pinctrl-names = "default";
@@ -491,12 +857,91 @@
vqmmc-supply = <&vreg_l6c_2p96>;
cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
bus-width = <4>;
- /* there seem to be issues with HS400-1.8V mode, so disable it */
- no-1-8-v;
no-sdio;
no-emmc;
};
+&sound {
+ compatible = "qcom,qrb5165-rb5-sndcard";
+ pinctrl-0 = <&tert_mi2s_active>;
+ pinctrl-names = "default";
+ model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
+ audio-routing =
+ "SpkrLeft IN", "WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA_SPK2 OUT",
+ "VA DMIC0", "vdd-micb",
+ "VA DMIC1", "vdd-micb",
+ "MM_DL1", "MultiMedia1 Playback",
+ "MM_DL2", "MultiMedia2 Playback",
+ "MultiMedia3 Capture", "MM_UL3";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ hdmi-dai-link {
+ link-name = "HDMI Playback";
+ cpu {
+ sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&lt9611_codec 0>;
+ };
+ };
+
+ dma-dai-link {
+ link-name = "WSA Playback";
+ cpu {
+ sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+ cpu {
+ sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&vamacro 0>;
+ };
+ };
+};
+
/* CAN */
&spi0 {
status = "okay";
@@ -512,6 +957,26 @@
};
};
+&swr0 {
+ left_spkr: wsa8810-left{
+ compatible = "sdw10217211000";
+ reg = <0 3>;
+ powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ #sound-dai-cells = <0>;
+ };
+
+ right_spkr: wsa8810-right{
+ compatible = "sdw10217211000";
+ reg = <0 4>;
+ powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ #sound-dai-cells = <0>;
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <40 4>;
gpio-line-names =
@@ -696,6 +1161,87 @@
"HST_WLAN_UART_TX",
"HST_WLAN_UART_RX";
+ lt9611_irq_pin: lt9611-irq {
+ pins = "gpio63";
+ function = "gpio";
+ bias-disable;
+ };
+
+ pcie0_default_state: pcie0-default {
+ clkreq {
+ pins = "gpio80";
+ function = "pci_e0";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio79";
+ function = "gpio";
+
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+
+ wake-n {
+ pins = "gpio81";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default {
+ clkreq {
+ pins = "gpio83";
+ function = "pci_e1";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio82";
+ function = "gpio";
+
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+
+ wake-n {
+ pins = "gpio84";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie2_default_state: pcie2-default {
+ clkreq {
+ pins = "gpio86";
+ function = "pci_e2";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio85";
+ function = "gpio";
+
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+
+ wake-n {
+ pins = "gpio87";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
sdc2_default_state: sdc2-default {
clk {
pins = "sdc2_clk";
@@ -706,13 +1252,13 @@
cmd {
pins = "sdc2_cmd";
bias-pull-up;
- drive-strength = <16>;
+ drive-strength = <10>;
};
data {
pins = "sdc2_data";
bias-pull-up;
- drive-strength = <16>;
+ drive-strength = <10>;
};
};
@@ -792,3 +1338,10 @@
vdda-phy-supply = <&vreg_l9a_1p2>;
vdda-pll-supply = <&vreg_l18a_0p92>;
};
+
+&vamacro {
+ pinctrl-0 = <&dmic01_active>;
+ pinctrl-names = "default";
+ vdd-micb-supply = <&vreg_s4a_1p8>;
+ qcom,dmic-sample-rate = <600000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 8ed7dd39f6e3..07c8b2c926c0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -298,40 +298,6 @@
regulator-max-microvolt = <1128000>;
};
- /*
- * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just
- * inputs to other rails on AOP-managed PMICs on trogdor.
- * The system is already configured to manage these rails
- * automatically (enable when needed, adjust voltage for
- * headroom) so we won't specify anything here.
- *
- * NOTE: though the rails have a voltage implied by their
- * name, the automatic headroom calculation might not result
- * in them being that voltage. ...and that's OK.
- * Specifically the only point of these rails is to provide
- * an input source for other rails and if we can satisify the
- * needs of those other rails with a lower source voltage then
- * we save power.
- */
-
- pp1200_l1a: ldo1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1000_l2a: ldo2 {
- regulator-min-microvolt = <944000>;
- regulator-max-microvolt = <1056000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1000_l3a: ldo3 {
- regulator-min-microvolt = <968000>;
- regulator-max-microvolt = <1064000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
vdd_qlink_lv:
vdd_qlink_lv_ck:
vdd_qusb_hs0_core:
@@ -350,24 +316,6 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- pp2700_l5a: ldo5 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2704000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- ebi0_cal:
- ebi1_cal:
- vddio_ck_ebi0:
- vddio_ck_ebi1:
- vddio_ebi0:
- vddq:
- pp600_l6a: ldo6 {
- regulator-min-microvolt = <568000>;
- regulator-max-microvolt = <648000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
vdd_cx_wlan:
pp800_l9a: ldo9 {
regulator-min-microvolt = <488000>;
@@ -404,6 +352,11 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ /*
+ * On trogdor this needs to match l10a since we use it to
+ * give power to things like SPI flash which communicate back
+ * on lines powered by l10a. Thus we force to 1.8V.
+ */
pp1800_l13a: ldo13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -424,12 +377,6 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- pp2700_l16a: ldo16 {
- regulator-min-microvolt = <2496000>;
- regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
vdda_qusb_hs0_3p1:
vdd_pdphy:
pp3100_l17a: ldo17 {
@@ -463,8 +410,8 @@
};
pp1800_l1c: ldo1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1616000>;
+ regulator-max-microvolt = <1984000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -491,25 +438,10 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ld_pp1800_esim_l4c:
- vddpx_5:
- pp1800_l4c: ldo4 {
- regulator-min-microvolt = <1648000>;
- regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vddpx_6:
- pp1800_l5c: ldo5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
vddpx_2:
ppvar_l6c: ldo6 {
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3304000>;
+ regulator-max-microvolt = <2952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -936,6 +868,13 @@ ap_spi_fp: &spi10 {
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+&dp_hot_plug_det {
+ pinconf {
+ pins = "gpio117";
+ bias-disable;
+ };
+};
+
&qspi_cs0 {
pinconf {
pins = "gpio68";
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 003309f0d3e1..1ea3344ab62c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -682,6 +682,11 @@
reg = <0x25b 0x1>;
bits = <1 3>;
};
+
+ gpu_speed_bin: gpu_speed_bin@1d2 {
+ reg = <0x1d2 0x2>;
+ bits = <5 8>;
+ };
};
sdhc_1: sdhci@7c4000 {
@@ -1466,12 +1471,6 @@
pins = "gpio117";
function = "dp_hot";
};
-
- pinconf {
- pins = "gpio117";
- bias-disable;
- input-enable;
- };
};
qspi_clk: qspi-clk {
@@ -2058,52 +2057,69 @@
#cooling-cells = <2>;
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
+ opp-825000000 {
+ opp-hz = /bits/ 64 <825000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ opp-peak-kBps = <8532000>;
+ opp-supported-hw = <0x04>;
+ };
+
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
opp-peak-kBps = <8532000>;
+ opp-supported-hw = <0x07>;
};
opp-650000000 {
opp-hz = /bits/ 64 <650000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-peak-kBps = <7216000>;
+ opp-supported-hw = <0x07>;
};
opp-565000000 {
opp-hz = /bits/ 64 <565000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-peak-kBps = <5412000>;
+ opp-supported-hw = <0x07>;
};
opp-430000000 {
opp-hz = /bits/ 64 <430000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <5412000>;
+ opp-supported-hw = <0x07>;
};
opp-355000000 {
opp-hz = /bits/ 64 <355000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <3072000>;
+ opp-supported-hw = <0x07>;
};
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <3072000>;
+ opp-supported-hw = <0x07>;
};
opp-180000000 {
opp-hz = /bits/ 64 <180000000>;
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
opp-peak-kBps = <1804000>;
+ opp-supported-hw = <0x07>;
};
};
};
@@ -3353,6 +3369,7 @@
compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
timer@17c20000{
@@ -3594,7 +3611,7 @@
};
thermal-zones {
- cpu0-thermal {
+ cpu0_thermal: cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
@@ -3643,7 +3660,7 @@
};
};
- cpu1-thermal {
+ cpu1_thermal: cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
@@ -3692,7 +3709,7 @@
};
};
- cpu2-thermal {
+ cpu2_thermal: cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
@@ -3741,7 +3758,7 @@
};
};
- cpu3-thermal {
+ cpu3_thermal: cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
@@ -3790,7 +3807,7 @@
};
};
- cpu4-thermal {
+ cpu4_thermal: cpu4-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
@@ -3839,7 +3856,7 @@
};
};
- cpu5-thermal {
+ cpu5_thermal: cpu5-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
@@ -3888,7 +3905,7 @@
};
};
- cpu6-thermal {
+ cpu6_thermal: cpu6-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
@@ -3929,7 +3946,7 @@
};
};
- cpu7-thermal {
+ cpu7_thermal: cpu7-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
@@ -3970,7 +3987,7 @@
};
};
- cpu8-thermal {
+ cpu8_thermal: cpu8-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
@@ -4011,7 +4028,7 @@
};
};
- cpu9-thermal {
+ cpu9_thermal: cpu9-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 37d5cc32f6b6..f91a928466c3 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -808,17 +808,19 @@
sdhc_1: sdhci@c0c4000 {
compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0c0c4000 0x1000>,
- <0x0c0c5000 0x1000>;
- reg-names = "hc", "cqhci";
+ <0x0c0c5000 0x1000>,
+ <0x0c0c8000 0x8000>;
+ reg-names = "hc", "cqhci", "ice";
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>,
+ <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+ clock-names = "core", "iface", "xo", "ice";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c0b93813ea9a..c4ac6f5dc008 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1114,11 +1114,11 @@
reg = <0x10>;
// CAM0_RST_N
- reset-gpios = <&tlmm 9 0>;
+ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cam0_default>;
gpios = <&tlmm 13 0>,
- <&tlmm 9 0>;
+ <&tlmm 9 GPIO_ACTIVE_LOW>;
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "xvclk";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
new file mode 100644
index 000000000000..8f617f7b6d34
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/delete-node/ &rmtfs_mem;
+
+/ {
+ aliases {
+ hsuart0 = &uart6;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ label = "Volume keys";
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
+
+ vol-down {
+ label = "Volume down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+
+ vol-up {
+ label = "Volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ /*
+ * The rmtfs memory region in downstream is 'dynamically allocated'
+ * but given the same address every time. Hard code it as this address is
+ * where the modem firmware expects it to be.
+ */
+ rmtfs_mem: memory@f5b01000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xf5b01000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
+ /*
+ * It seems like reserving the old rmtfs_mem region is also needed to prevent
+ * random crashes which are most likely modem related, more testing needed.
+ */
+ removed_region: memory@88f00000 {
+ no-map;
+ reg = <0 0x88f00000 0 0x200000>;
+ };
+
+ ramoops: ramoops@ac300000 {
+ compatible = "ramoops";
+ reg = <0 0xac300000 0 0x400000>;
+ record-size = <0x40000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x40000>;
+ pmsg-size = <0x200000>;
+ devinfo-size = <0x1000>;
+ ecc-size = <16>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8998 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8998-smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ /*
+ * The touchscreen regulator seems to be controlled somehow by a gpio.
+ * Model it as a fixed regulator and keep it on. Without schematics we
+ * don't know how this is actually wired up...
+ */
+ ts_1p8_supply: ts-1p8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ts_1p8_supply";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 88 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&adsp_pas {
+ status = "okay";
+ firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+ vdd-s13-supply = <&vph_pwr>;
+ vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+ vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+ vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+ vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+ vdd-l6-supply = <&vph_pwr>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l9-supply = <&vreg_bob>;
+ vdd-l10-l23-l25-supply = <&vreg_bob>;
+ vdd-l13-l19-l21-supply = <&vreg_bob>;
+ vdd-l16-l28-supply = <&vreg_bob>;
+ vdd-l18-l22-supply = <&vreg_bob>;
+ vdd-l20-l24-supply = <&vreg_bob>;
+ vdd-l26-supply = <&vreg_s3a_1p35>;
+ vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vdda_mipi_dsi0_pll:
+ vdda_qlink_lv:
+ vdda_ufs1_core:
+ vdda_usb1_ss_core:
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_1p8:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p88: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_mipi_dsi0_1p2:
+ vdda_ufs1_1p2:
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l28a_3p0: ldo28 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+
+ pm8005-rpmh-regulators {
+ compatible = "qcom,pm8005-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s3c_0p6: smps3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ };
+ };
+};
+
+&cdsp_pas {
+ status = "okay";
+ firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
+};
+
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Both devices use different panels but all other properties
+ * are common. Compatible line is declared in device dts.
+ */
+ display_panel: panel@0 {
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&gcc {
+ protected-clocks = <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_LPASS_Q6_AXI_CLK>,
+ <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ synaptics-rmi4-i2c@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_default_pins>;
+
+ vdd-supply = <&vreg_l28a_3p0>;
+ vio-supply = <&ts_1p8_supply>;
+
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <200>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4_f12: rmi4-f12@12 {
+ reg = <0x12>;
+ touchscreen-x-mm = <68>;
+ touchscreen-y-mm = <144>;
+ syna,sensor-type = <1>;
+ syna,rezero-wait-ms = <200>;
+ };
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
+/* Modem/wifi*/
+&mss_pil {
+ status = "okay";
+ firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
+};
+
+&pm8998_gpio {
+ volume_down_gpio: pm8998_gpio5 {
+ pinconf {
+ pins = "gpio5";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <0>;
+ };
+ };
+
+ volume_up_gpio: pm8998_gpio6 {
+ pinconf {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <0>;
+ };
+ };
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qup_i2c12_default {
+ mux {
+ pins = "gpio49", "gpio50";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_i2c10_default {
+ pinconf {
+ pins = "gpio55", "gpio56";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_uart9_default {
+ pinconf-tx {
+ pins = "gpio4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+/*
+ * Prevent garbage data on bluetooth UART lines
+ */
+&qup_uart6_default {
+ pinmux {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "qup6";
+ };
+
+ cts {
+ pins = "gpio45";
+ bias-pull-down;
+ };
+
+ rts-tx {
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio48";
+ bias-pull-up;
+ };
+};
+
+&uart6 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ /*
+ * This path is relative to the qca/
+ * subdir under lib/firmware.
+ */
+ firmware-name = "oneplus6/crnv21.bin";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_ufs1_core>;
+ vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+ status = "okay";
+
+ /*
+ * disable USB3 clock requirement as the device only supports
+ * USB2.
+ */
+ qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+ /*
+ * We don't have the capability to switch modes yet.
+ */
+ dr_mode = "peripheral";
+
+ /* fastest mode for USB 2 */
+ maximum-speed = "high-speed";
+
+ /* Remove USB3 phy as it's unused on this device. */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+
+ tri_state_key_default: tri_state_key_default {
+ mux {
+ pins = "gpio40", "gpio42", "gpio26";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ ts_default_pins: ts-int {
+ mux {
+ pins = "gpio99", "gpio125";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ panel_reset_pins: panel-reset {
+ mux {
+ pins = "gpio6", "gpio25", "gpio26";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable = <0>;
+ };
+ };
+
+ panel_te_pin: panel-te {
+ mux {
+ pins = "gpio10";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+ };
+
+ panel_esd_pin: panel-esd {
+ mux {
+ pins = "gpio30";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+ qcom,snoc-host-cap-8bit-quirk;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
new file mode 100644
index 000000000000..72842c887617
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6 (enchilada) device tree.
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+ model = "OnePlus 6";
+ compatible = "oneplus,enchilada", "qcom,sdm845";
+};
+
+&display_panel {
+ status = "okay";
+
+ compatible = "samsung,sofef00";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
new file mode 100644
index 000000000000..969b36dc9e2c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6T (fajita) device tree.
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+ model = "OnePlus 6T";
+ compatible = "oneplus,fajita", "qcom,sdm845";
+};
+
+&display_panel {
+ status = "okay";
+
+ compatible = "samsung,s6e3fc2x01";
+};
+
+&rmi4_f12 {
+ touchscreen-y-mm = <148>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 04b2490eec9f..454f794af547 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4571,6 +4571,7 @@
compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
reg = <0 0x17980000 0 0x1000>;
clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
apss_shared: mailbox@17990000 {
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 8b40f96e9780..140db2d5ba31 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -13,7 +13,7 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
-#include "sdm845.dtsi"
+#include "sdm850.dtsi"
#include "pm8998.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/qcom/sdm850.dtsi b/arch/arm64/boot/dts/qcom/sdm850.dtsi
new file mode 100644
index 000000000000..b1c2cf566c7a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM850 SoC device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845.dtsi"
+
+&cpu4_opp_table {
+ cpu4_opp33: opp-2841600000 {
+ opp-hz = /bits/ 64 <2841600000>;
+ opp-peak-kBps = <7216000 25497600>;
+ };
+
+ cpu4_opp34: opp-2956800000 {
+ opp-hz = /bits/ 64 <2956800000>;
+ opp-peak-kBps = <7216000 25497600>;
+ turbo-mode;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 5270bda7418f..e5bb17bc2f46 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -47,8 +47,12 @@
compatible = "qcom,kryo485";
reg = <0x0 0x0>;
enable-method = "psci";
+ capacity-dmips-mhz = <488>;
+ dynamic-power-coefficient = <232>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
@@ -64,8 +68,12 @@
compatible = "qcom,kryo485";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <488>;
+ dynamic-power-coefficient = <232>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
@@ -79,8 +87,12 @@
compatible = "qcom,kryo485";
reg = <0x0 0x200>;
enable-method = "psci";
+ capacity-dmips-mhz = <488>;
+ dynamic-power-coefficient = <232>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
@@ -93,8 +105,12 @@
compatible = "qcom,kryo485";
reg = <0x0 0x300>;
enable-method = "psci";
+ capacity-dmips-mhz = <488>;
+ dynamic-power-coefficient = <232>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
@@ -107,8 +123,12 @@
compatible = "qcom,kryo485";
reg = <0x0 0x400>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <369>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
@@ -121,8 +141,12 @@
compatible = "qcom,kryo485";
reg = <0x0 0x500>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <369>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
@@ -135,8 +159,12 @@
compatible = "qcom,kryo485";
reg = <0x0 0x600>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <369>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
@@ -149,14 +177,90 @@
compatible = "qcom,kryo485";
reg = <0x0 0x700>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <421>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 2>;
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
#cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+
+ core6 {
+ cpu = <&CPU6>;
+ };
+
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <355>;
+ exit-latency-us = <909>;
+ min-residency-us = <3934>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <241>;
+ exit-latency-us = <1461>;
+ min-residency-us = <4488>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "domain-idle-state";
+ idle-state-name = "cluster-power-collapse";
+ arm,psci-suspend-param = <0x4100c244>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+ };
};
firmware {
@@ -186,6 +290,59 @@
psci {
compatible = "arm,psci-1.0";
method = "smc";
+
+ CPU_PD0: cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD4: cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD5: cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD6: cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD7: cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CLUSTER_PD: cpu-cluster0 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_0>;
+ };
};
reserved-memory {
@@ -1818,6 +1975,7 @@
compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
timer@17c20000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index dea00f19711d..5b4c5b08434c 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -24,6 +24,106 @@
stdout-path = "serial0:115200n8";
};
+ thermal-zones {
+ camera-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ conn-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mmw-pa1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mmw-pa2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-msm-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -186,6 +286,13 @@
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+
+ vreg_l18a_0p9: ldo18 {
+ regulator-name = "vreg_l18a_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
};
pm8150l-rpmh-regulators {
@@ -358,6 +465,13 @@
firmware-name = "qcom/sm8250/cdsp.mbn";
};
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sm8250/a650_zap.mbn";
+ };
+};
+
&i2c1 {
status = "okay";
clock-frequency = <1000000>;
@@ -378,6 +492,115 @@
/* rtc6226 @ 64 */
};
+&pm8150_adc {
+ xo-therm@4c {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-therm@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm1@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ skin-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-therm1@2 {
+ reg = <2>;
+ io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150b_adc {
+ conn-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150b_adc_tm {
+ status = "okay";
+
+ conn-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150l_adc_tm {
+ status = "okay";
+
+ camera-flash-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ skin-msm-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-therm2@2 {
+ reg = <2>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150l_adc {
+ camera-flash-therm@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-msm-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm2@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
&pm8150_rtc {
status = "okay";
};
@@ -426,3 +649,49 @@
vdda-pll-supply = <&vreg_l9a_1p2>;
vdda-pll-max-microamp = <19000>;
};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l5a_0p875>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l9a_1p2>;
+ vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l5a_0p875>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_2_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l9a_1p2>;
+ vdda-pll-supply = <&vreg_l18a_0p9>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 65acd1f381eb..947e1accae3a 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4,14 +4,18 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sm8250.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -89,6 +93,8 @@
compatible = "qcom,kryo485";
reg = <0x0 0x0>;
enable-method = "psci";
+ capacity-dmips-mhz = <448>;
+ dynamic-power-coefficient = <205>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -106,6 +112,8 @@
compatible = "qcom,kryo485";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <448>;
+ dynamic-power-coefficient = <205>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -120,6 +128,8 @@
compatible = "qcom,kryo485";
reg = <0x0 0x200>;
enable-method = "psci";
+ capacity-dmips-mhz = <448>;
+ dynamic-power-coefficient = <205>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -134,6 +144,8 @@
compatible = "qcom,kryo485";
reg = <0x0 0x300>;
enable-method = "psci";
+ capacity-dmips-mhz = <448>;
+ dynamic-power-coefficient = <205>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -148,6 +160,8 @@
compatible = "qcom,kryo485";
reg = <0x0 0x400>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <379>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
@@ -162,6 +176,8 @@
compatible = "qcom,kryo485";
reg = <0x0 0x500>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <379>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
@@ -177,6 +193,8 @@
compatible = "qcom,kryo485";
reg = <0x0 0x600>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <379>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
@@ -191,6 +209,8 @@
compatible = "qcom,kryo485";
reg = <0x0 0x700>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <444>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 2>;
#cooling-cells = <2>;
@@ -199,6 +219,42 @@
next-level-cache = <&L3_0>;
};
};
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+
+ core6 {
+ cpu = <&CPU6>;
+ };
+
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
};
firmware {
@@ -214,6 +270,13 @@
reg = <0x0 0x80000000 0x0 0x0>;
};
+ mmcx_reg: mmcx-reg {
+ compatible = "regulator-fixed-domain";
+ power-domains = <&rpmhpd SM8250_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ regulator-name = "MMCX";
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -321,7 +384,7 @@
};
};
- smem: qcom,smem {
+ smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
@@ -1168,6 +1231,299 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ pcie0: pci@1c00000 {
+ compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu",
+ "ddrss_sf_tbu";
+
+ iommus = <&apps_smmu 0x1c00 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+ <0x100 &apps_smmu 0x1c01 0x1>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ phys = <&pcie0_lane>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
+ reg = <0 0x01c06000 0 0x1c0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_WIFI_CLKREF_EN>,
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie0_lane: lanes@1c06200 {
+ reg = <0 0x1c06200 0 0x170>, /* tx */
+ <0 0x1c06400 0 0x200>, /* rx */
+ <0 0x1c06800 0 0x1f0>, /* pcs */
+ <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #phy-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk";
+ };
+ };
+
+ pcie1: pci@1c08000 {
+ compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+ interrupts = <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ref",
+ "tbu",
+ "ddrss_sf_tbu";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ iommus = <&apps_smmu 0x1c80 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+ <0x100 &apps_smmu 0x1c81 0x1>;
+
+ resets = <&gcc GCC_PCIE_1_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_1_GDSC>;
+
+ phys = <&pcie1_lane>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@1c0e000 {
+ compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+ reg = <0 0x01c0e000 0 0x1c0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie1_lane: lanes@1c0e200 {
+ reg = <0 0x1c0e200 0 0x170>, /* tx0 */
+ <0 0x1c0e400 0 0x200>, /* rx0 */
+ <0 0x1c0ea00 0 0x1f0>, /* pcs */
+ <0 0x1c0e600 0 0x170>, /* tx1 */
+ <0 0x1c0e800 0 0x200>, /* rx1 */
+ <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #phy-cells = <0>;
+ clock-output-names = "pcie_1_pipe_clk";
+ };
+ };
+
+ pcie2: pci@1c10000 {
+ compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
+ reg = <0 0x01c10000 0 0x3000>,
+ <0 0x64000000 0 0xf1d>,
+ <0 0x64000f20 0 0xa8>,
+ <0 0x64001000 0 0x1000>,
+ <0 0x64100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
+ <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
+
+ interrupts = <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+ <&gcc GCC_PCIE_2_AUX_CLK>,
+ <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_PCIE_MDM_CLKREF_EN>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ref",
+ "tbu",
+ "ddrss_sf_tbu";
+
+ assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ iommus = <&apps_smmu 0x1d00 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1d00 0x1>,
+ <0x100 &apps_smmu 0x1d01 0x1>;
+
+ resets = <&gcc GCC_PCIE_2_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_2_GDSC>;
+
+ phys = <&pcie2_lane>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie2_phy: phy@1c16000 {
+ compatible = "qcom,sm8250-qmp-modem-pcie-phy";
+ reg = <0 0x1c16000 0 0x1c0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_MDM_CLKREF_EN>,
+ <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+ resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie2_lane: lanes@1c0e200 {
+ reg = <0 0x1c16200 0 0x170>, /* tx0 */
+ <0 0x1c16400 0 0x200>, /* rx0 */
+ <0 0x1c16a00 0 0x1f0>, /* pcs */
+ <0 0x1c16600 0 0x170>, /* tx1 */
+ <0 0x1c16800 0 0x200>, /* rx1 */
+ <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #phy-cells = <0>;
+ clock-output-names = "pcie_2_pipe_clk";
+ };
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -1253,15 +1609,169 @@
#hwlock-cells = <1>;
};
+ wsamacro: codec@3240000 {
+ compatible = "qcom,sm8250-lpass-wsa-macro";
+ reg = <0 0x03240000 0 0x1000>;
+ clocks = <&audiocc 1>,
+ <&audiocc 0>,
+ <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&aoncc 0>,
+ <&vamacro>;
+
+ clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wsa_swr_active>;
+ };
+
+ swr0: soundwire-controller@3250000 {
+ reg = <0 0x03250000 0 0x2000>;
+ compatible = "qcom,soundwire-v1.5.1";
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wsamacro>;
+ clock-names = "iface";
+
+ qcom,din-ports = <2>;
+ qcom,dout-ports = <6>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ audiocc: clock-controller@3300000 {
+ compatible = "qcom,sm8250-lpass-audiocc";
+ reg = <0 0x03300000 0 0x30000>;
+ #clock-cells = <1>;
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio", "bus";
+ };
+
+ vamacro: codec@3370000 {
+ compatible = "qcom,sm8250-lpass-va-macro";
+ reg = <0 0x03370000 0 0x1000>;
+ clocks = <&aoncc 0>,
+ <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+ clock-names = "mclk", "macro", "dcodec";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "fsgen";
+ #sound-dai-cells = <1>;
+ };
+
+ aoncc: clock-controller@3380000 {
+ compatible = "qcom,sm8250-lpass-aoncc";
+ reg = <0 0x03380000 0 0x40000>;
+ #clock-cells = <1>;
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio", "bus";
+ };
+
+ lpass_tlmm: pinctrl@33c0000{
+ compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+ reg = <0 0x033c0000 0x0 0x20000>,
+ <0 0x03550000 0x0 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 14>;
+
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ wsa_swr_active: wsa-swr-active-pins {
+ clk {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+
+ };
+ };
+
+ wsa_swr_sleep: wsa-swr-sleep-pins {
+ clk {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ input-enable;
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ input-enable;
+ bias-pull-down;
+
+ };
+ };
+
+ dmic01_active: dmic01-active-pins {
+ clk {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ drive-strength = <8>;
+ output-high;
+ };
+ data {
+ pins = "gpio7";
+ function = "dmic1_data";
+ drive-strength = <8>;
+ input-enable;
+ };
+ };
+
+ dmic01_sleep: dmic01-sleep-pins {
+ clk {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ data {
+ pins = "gpio7";
+ function = "dmic1_data";
+ drive-strength = <2>;
+ pull-down;
+ input-enable;
+ };
+ };
+ };
+
gpu: gpu@3d00000 {
- /*
- * note: the amd,imageon compatible makes it possible
- * to use the drm/msm driver without the display node,
- * make sure to remove it when display node is added
- */
compatible = "qcom,adreno-650.2",
- "qcom,adreno",
- "amd,imageon";
+ "qcom,adreno";
#stream-id-cells = <16>;
reg = <0 0x03d00000 0 0x40000>;
@@ -1557,6 +2067,9 @@
};
};
+ sound: sound {
+ };
+
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8250-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
@@ -1657,7 +2170,7 @@
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
+ <&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
iommus = <&apps_smmu 0x4a0 0x0>;
qcom,dll-config = <0x0007642c>;
@@ -1758,6 +2271,12 @@
};
};
+ system-cache-controller@9200000 {
+ compatible = "qcom,sm8250-llcc";
+ reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
+ reg-names = "llcc_base", "llcc_broadcast_base";
+ };
+
usb_2: usb@a8f8800 {
compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
reg = <0 0x0a8f8800 0 0x400>;
@@ -1803,6 +2322,299 @@
};
};
+ mdss: mdss@ae00000 {
+ compatible = "qcom,sdm845-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
+ <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ assigned-clock-rates = <460000000>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mdss_mdp: mdp@ae01000 {
+ compatible = "qcom,sdm845-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: mdp-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi0: dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: dsi-phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ dsi1: dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: dsi-phy@ae96400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96900 0 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+
+ dsi_opp_table: dsi-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8250-dispcc";
+ reg = <0 0x0af00000 0 0x20000>;
+ mmcx-supply = <&mmcx_reg>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&dsi0_phy 0>,
+ <&dsi0_phy 1>,
+ <&dsi1_phy 0>,
+ <&dsi1_phy 1>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_link_clk_divsel_ten",
+ "dp_vco_divided_clk_src_mux",
+ "dptx1_phy_pll_link_clk",
+ "dptx1_phy_pll_vco_div_clk",
+ "dptx2_phy_pll_link_clk",
+ "dptx2_phy_pll_vco_div_clk",
+ "edp_phy_pll_link_clk",
+ "edp_phy_pll_vco_div_clk",
+ "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8250-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -1880,6 +2692,37 @@
gpio-ranges = <&tlmm 0 0 180>;
wakeup-parent = <&pdc>;
+ pri_mi2s_active: pri-mi2s-active {
+ sclk {
+ pins = "gpio138";
+ function = "mi2s0_sck";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ ws {
+ pins = "gpio141";
+ function = "mi2s0_ws";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ data0 {
+ pins = "gpio139";
+ function = "mi2s0_data0";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ data1 {
+ pins = "gpio140";
+ function = "mi2s0_data1";
+ drive-strength = <8>;
+ output-high;
+ };
+ };
+
qup_i2c0_default: qup-i2c0-default {
mux {
pins = "gpio28", "gpio29";
@@ -2476,6 +3319,30 @@
function = "qup18";
};
};
+
+ tert_mi2s_active: tert-mi2s-active {
+ sck {
+ pins = "gpio133";
+ function = "mi2s2_sck";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ data0 {
+ pins = "gpio134";
+ function = "mi2s2_data0";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ ws {
+ pins = "gpio135";
+ function = "mi2s2_ws";
+ drive-strength = <8>;
+ output-high;
+ };
+ };
};
apps_smmu: iommu@15000000 {
@@ -2620,6 +3487,60 @@
label = "lpass";
qcom,remote-pid = <2>;
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,apr-domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ apr-service@3 {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ };
+
+ q6afe: apr-service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ q6afecc: cc {
+ compatible = "qcom,q6afe-clocks";
+ #clock-cells = <2>;
+ };
+ };
+
+ q6asm: apr-service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&apps_smmu 0x1801 0x0>;
+ };
+ };
+
+ q6adm: apr-service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -2661,6 +3582,7 @@
compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
timer@17c20000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
new file mode 100644
index 000000000000..8923657579fb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. sm8350 MTP";
+ compatible = "qcom,sm8350-mtp", "qcom,sm8350";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ pm8350-rpmh-regulators {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+
+ vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_bob>;
+ vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+ vdd-l8-supply = <&vreg_s2c_0p8>;
+
+ vreg_s10b_1p8: smps10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_s11b_0p95: smps11 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_s12b_1p25: smps12 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1360000>;
+ };
+
+ vreg_l1b_0p88: ldo1 {
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p07: ldo2 {
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p9: ldo3 {
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_0p88: ldo5 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <888000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1208000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p96: ldo7 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8350c-rpmh-regulators {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+ vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&vreg_s12b_1p25>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_s1c_1p86: smps1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1952000>;
+ };
+
+ vreg_s2c_0p8: smps2 {
+ regulator-min-microvolt = <640000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_s10c_1p05: smps10 {
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p8: ldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_3p0: ldo3 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_uim1: ldo4 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_uim2: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_1p8: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_1p2: ldo10 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p96: ldo11 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_3p0: ldo13 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <52 8>;
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
new file mode 100644
index 000000000000..5ef460458f5c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limaited
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_100>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_300>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo685";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sm8350", "qcom,scm";
+ #reset-cells = <1>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x80000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: memory@80000000 {
+ reg = <0x0 0x80000000 0x0 0x600000>;
+ no-map;
+ };
+
+ xbl_aop_mem: memory@80700000 {
+ no-map;
+ reg = <0x0 0x80700000 0x0 0x160000>;
+ };
+
+ cmd_db: memory@80860000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x0 0x80860000 0x0 0x20000>;
+ no-map;
+ };
+
+ reserved_xbl_uefi_log: memory@80880000 {
+ reg = <0x0 0x80880000 0x0 0x14000>;
+ no-map;
+ };
+
+ smem_mem: memory@80900000 {
+ reg = <0x0 0x80900000 0x0 0x200000>;
+ no-map;
+ };
+
+ cpucp_fw_mem: memory@80b00000 {
+ reg = <0x0 0x80b00000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap: memory@80c00000 {
+ reg = <0x0 0x80c00000 0x0 0x4600000>;
+ no-map;
+ };
+
+ pil_camera_mem: mmeory@85200000 {
+ reg = <0x0 0x85200000 0x0 0x500000>;
+ no-map;
+ };
+
+ pil_video_mem: memory@85700000 {
+ reg = <0x0 0x85700000 0x0 0x500000>;
+ no-map;
+ };
+
+ pil_cvp_mem: memory@85c00000 {
+ reg = <0x0 0x85c00000 0x0 0x500000>;
+ no-map;
+ };
+
+ pil_adsp_mem: memory@86100000 {
+ reg = <0x0 0x86100000 0x0 0x2100000>;
+ no-map;
+ };
+
+ pil_slpi_mem: memory@88200000 {
+ reg = <0x0 0x88200000 0x0 0x1500000>;
+ no-map;
+ };
+
+ pil_cdsp_mem: memory@89700000 {
+ reg = <0x0 0x89700000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_ipa_fw_mem: memory@8b500000 {
+ reg = <0x0 0x8b500000 0x0 0x10000>;
+ no-map;
+ };
+
+ pil_ipa_gsi_mem: memory@8b510000 {
+ reg = <0x0 0x8b510000 0x0 0xa000>;
+ no-map;
+ };
+
+ pil_gpu_mem: memory@8b51a000 {
+ reg = <0x0 0x8b51a000 0x0 0x2000>;
+ no-map;
+ };
+
+ pil_spss_mem: memory@8b600000 {
+ reg = <0x0 0x8b600000 0x0 0x100000>;
+ no-map;
+ };
+
+ pil_modem_mem: memory@8b800000 {
+ reg = <0x0 0x8b800000 0x0 0x10000000>;
+ no-map;
+ };
+
+ hyp_reserved_mem: memory@d0000000 {
+ reg = <0x0 0xd0000000 0x0 0x800000>;
+ no-map;
+ };
+
+ pil_trustedvm_mem: memory@d0800000 {
+ reg = <0x0 0xd0800000 0x0 0x76f7000>;
+ no-map;
+ };
+
+ qrtr_shbuf: memory@d7ef7000 {
+ reg = <0x0 0xd7ef7000 0x0 0x9000>;
+ no-map;
+ };
+
+ chan0_shbuf: memory@d7f00000 {
+ reg = <0x0 0xd7f00000 0x0 0x80000>;
+ no-map;
+ };
+
+ chan1_shbuf: memory@d7f80000 {
+ reg = <0x0 0xd7f80000 0x0 0x80000>;
+ no-map;
+ };
+
+ removed_mem: memory@d8800000 {
+ reg = <0x0 0xd8800000 0x0 0x6800000>;
+ no-map;
+ };
+ };
+
+ smem: qcom,smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc: soc@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sm8350";
+ reg = <0x0 0x00100000 0x0 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+ };
+
+ ipcc: mailbox@408000 {
+ compatible = "qcom,sm8350-ipcc", "qcom,ipcc";
+ reg = <0 0x00408000 0 0x1000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #mbox-cells = <2>;
+ };
+
+ qupv3_id_1: geniqup@9c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x009c0000 0x0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc 121>,
+ <&gcc 122>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ uart2: serial@98c000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0 0x0098c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc 83>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart3_default_state>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm8350-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+ qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
+ <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
+ <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
+ <156 716 12>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ aoss_qmp: qmp@c300000 {
+ compatible = "qcom,sm8350-aoss-qmp";
+ reg = <0 0x0c300000 0 0x100000>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ #power-domain-cells = <1>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm8350-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 203>;
+
+ qup_uart3_default_state: qup-uart3-default-state {
+ rx {
+ pins = "gpio18";
+ function = "qup3";
+ };
+ tx {
+ pins = "gpio19";
+ function = "qup3";
+ };
+ };
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
+ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@17c20000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ reg = <0x0 0x17c20000 0x0 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17c21000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c21000 0x0 0x1000>,
+ <0x0 0x17c22000 0x0 0x1000>;
+ };
+
+ frame@17c23000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c23000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c25000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c25000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c27000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c27000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c29000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c29000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2b000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2d000 0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@18200000 {
+ label = "apps_rsc";
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 1>;
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sm8350-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
+
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 3b8b03705917..f2de2fa0c8b8 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-beacon-rzg2n-kit.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb
@@ -21,6 +22,7 @@ dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb
dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb
dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-beacon-rzg2h-kit.dtb
dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb
dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index e66b5b36e489..30c169b08536 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -5,23 +5,24 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/clk/versaclock.h>
/ {
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
power-supply = <&reg_lcd>;
- enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>;
- pwms = <&pwm2 0 50000>;
+ enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm2 0 25000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
- backlight_rgb: backlight-rgb {
+ backlight_dpi: backlight-dpi {
compatible = "pwm-backlight";
power-supply = <&reg_lcd>;
enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
- pwms = <&pwm0 0 50000>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
+ pwms = <&pwm0 0 25000>;
+ brightness-levels = <0 25 33 50 63 75 88 100>;
default-brightness-level = <6>;
};
@@ -39,38 +40,38 @@
keys {
compatible = "gpio-keys";
- key-1 {
+ key-1 { /* S19 */
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_1>;
- label = "Switch-1";
+ linux,code = <KEY_UP>;
+ label = "Up";
wakeup-source;
debounce-interval = <20>;
};
- key-2 {
+ key-2 { /*S20 */
gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_2>;
- label = "Switch-2";
+ linux,code = <KEY_LEFT>;
+ label = "Left";
wakeup-source;
debounce-interval = <20>;
};
- key-3 {
+ key-3 { /* S21 */
gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_3>;
- label = "Switch-3";
+ linux,code = <KEY_DOWN>;
+ label = "Down";
wakeup-source;
debounce-interval = <20>;
};
- key-4 {
+ key-4 { /* S22 */
gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_4>;
- label = "Switch-4";
+ linux,code = <KEY_RIGHT>;
+ label = "Right";
wakeup-source;
debounce-interval = <20>;
};
- key-5 {
+ key-5 { /* S23 */
gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_5>;
- label = "Switch-4";
+ linux,code = <KEY_ENTER>;
+ label = "Center";
wakeup-source;
debounce-interval = <20>;
};
@@ -118,9 +119,9 @@
hback-porch = <40>;
vfront-porch = <13>;
vback-porch = <29>;
- vsync-len = <3>;
+ vsync-len = <1>;
hsync-active = <1>;
- vsync-active = <1>;
+ vsync-active = <3>;
de-active = <1>;
pixelclk-active = <0>;
};
@@ -135,7 +136,7 @@
rgb {
/* Different LCD with compatible timings */
compatible = "rocktech,rk070er9427";
- backlight = <&backlight_rgb>;
+ backlight = <&backlight_dpi>;
enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
power-supply = <&reg_lcd>;
port {
@@ -150,7 +151,7 @@
regulator-name = "audio-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -200,15 +201,12 @@
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
-
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
-
gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
- regulator-always-on;
};
/* External DU dot clocks */
@@ -248,12 +246,6 @@
};
};
-&audio_clk_a {
- clock-frequency = <24576000>;
- assigned-clocks = <&versaclock6_bb 4>;
- assigned-clock-rates = <24576000>;
-};
-
&audio_clk_b {
clock-frequency = <22579200>;
};
@@ -272,21 +264,6 @@
status = "okay";
};
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 722>,
- <&versaclock5 1>,
- <&x302_clk>,
- <&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2",
- "dclkin.0", "dclkin.1", "dclkin.2";
-};
-
&du_out_rgb {
remote-endpoint = <&rgb_panel>;
};
@@ -342,7 +319,7 @@
&i2c2 {
status = "okay";
- clock-frequency = <100000>;
+ clock-frequency = <400000>;
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
@@ -373,12 +350,36 @@
#clock-cells = <1>;
clocks = <&x304_clk>;
clock-names = "xin";
- /* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
+
assigned-clocks = <&versaclock6_bb 1>,
<&versaclock6_bb 2>,
<&versaclock6_bb 3>,
<&versaclock6_bb 4>;
assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>;
+
+ OUT1 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT2 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT3 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <3300000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT4 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <3300000>;
+ idt,slew-percent = <100>;
+ };
};
};
@@ -392,13 +393,14 @@
&i2c5 {
status = "okay";
- clock-frequency = <100000>;
+ clock-frequency = <400000>;
pinctrl-0 = <&i2c5_pins>;
pinctrl-names = "default";
codec: wm8962@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
+ clocks = <&versaclock6_bb 3>;
DCVDD-supply = <&reg_audio>;
DBVDD-supply = <&reg_audio>;
AVDD-supply = <&reg_audio>;
@@ -481,6 +483,13 @@
};
};
+&msiof1 {
+ pinctrl-0 = <&msiof1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+};
+
&ohci0 {
dr_mode = "otg";
status = "okay";
@@ -534,6 +543,11 @@
bias-pull-down;
};
+ msiof1_pins: msiof1 {
+ groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
+ function = "msiof1";
+ };
+
pwm0_pins: pwm0 {
groups = "pwm0";
function = "pwm0";
@@ -541,7 +555,7 @@
pwm2_pins: pwm2 {
groups = "pwm2_a";
- function = "pwm2_a";
+ function = "pwm2";
};
sdhi0_pins: sd0 {
@@ -562,7 +576,7 @@
};
sound_clk_pins: sound_clk {
- groups = "audio_clk_a_a";
+ groups = "audio_clk_a_a", "audio_clk_b_a";
function = "audio_clk";
};
@@ -613,23 +627,6 @@
status = "okay";
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
- <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
-
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 8ac167aa18f0..8d3a4d6ee885 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/versaclock.h>
/ {
memory@48000000 {
@@ -12,11 +13,6 @@
reg = <0x0 0x48000000 0x0 0x78000000>;
};
- memory@600000000 {
- device_type = "memory";
- reg = <0x6 0x00000000 0x0 0x80000000>;
- };
-
osc_32k: osc_32k {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -89,7 +85,6 @@
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
- max-speed = <4000000>;
bluetooth {
compatible = "brcm,bcm43438-bt";
@@ -98,6 +93,7 @@
device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
clocks = <&osc_32k>;
clock-names = "extclk";
+ max-speed = <4000000>;
};
};
@@ -109,7 +105,7 @@
&i2c4 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
pca9654: gpio@20 {
compatible = "onnn,pca9654";
@@ -148,7 +144,7 @@
};
eeprom@50 {
- compatible = "microchip,at24c64", "atmel,24c64";
+ compatible = "microchip,24c64", "atmel,24c64";
pagesize = <32>;
read-only; /* Manufacturing EEPROM programmed at factory */
reg = <0x50>;
@@ -170,7 +166,32 @@
<&versaclock5 2>,
<&versaclock5 3>,
<&versaclock5 4>;
+
assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+
+ OUT1 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT2 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT3 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT4 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <3300000>;
+ idt,slew-percent = <100>;
+ };
};
};
@@ -291,6 +312,8 @@
vqmmc-supply = <&reg_1p8v>;
bus-width = <8>;
mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
non-removable;
fixed-emmc-driver-type = <1>;
status = "okay";
@@ -303,11 +326,3 @@
&usb3s0_clk {
clock-frequency = <100000000>;
};
-
-&vspb {
- status = "okay";
-};
-
-&vspi0 {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 2eda9f66ae81..7a3da9b06f67 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -328,6 +328,8 @@
vqmmc-supply = <&reg_1p8v>;
bus-width = <8>;
mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
non-removable;
fixed-emmc-driver-type = <1>;
status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
index 2c5b057c30c6..501cb05da228 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
@@ -26,4 +26,45 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+/* Reference versaclock instead of audio_clk_a */
+&rcar_sound {
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&versaclock6_bb 4>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index d37ec42a1caa..d64fb8b1b86c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -835,6 +835,21 @@
status = "disabled";
};
+ usb2_clksel: clock-controller@e6590630 {
+ compatible = "renesas,r8a774a1-rcar-usb2-clock-sel",
+ "renesas,rcar-gen3-usb2-clock-sel";
+ reg = <0 0xe6590630 0 0x02>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&usb_extal_clk>, <&usb3s0_clk>;
+ clock-names = "ehci_ohci", "hs-usb-if",
+ "usb_extal", "usb_xtal";
+ #clock-cells = <0>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ reset-names = "ehci_ohci", "hs-usb-if";
+ status = "disabled";
+ };
+
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a774a1-usb-dmac",
"renesas,usb-dmac";
@@ -2302,6 +2317,23 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a774a1-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x4000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ clock-names = "rpc";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
new file mode 100644
index 000000000000..71763f4402a7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774b1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+ model = "Beacon Embedded Works RZ/G2N Development Kit";
+ compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1";
+
+ aliases {
+ serial0 = &scif2;
+ serial1 = &hscif0;
+ serial2 = &hscif1;
+ serial3 = &scif0;
+ serial4 = &hscif2;
+ serial5 = &scif5;
+ serial6 = &scif4;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+/* Reference versaclock instead of audio_clk_a */
+&rcar_sound {
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&versaclock6_bb 4>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A774B1_CLK_S0D4>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 83523916d360..5b05474dc272 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -709,6 +709,21 @@
status = "disabled";
};
+ usb2_clksel: clock-controller@e6590630 {
+ compatible = "renesas,r8a774b1-rcar-usb2-clock-sel",
+ "renesas,rcar-gen3-usb2-clock-sel";
+ reg = <0 0xe6590630 0 0x02>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&usb_extal_clk>, <&usb3s0_clk>;
+ clock-names = "ehci_ohci", "hs-usb-if",
+ "usb_extal", "usb_xtal";
+ #clock-cells = <0>;
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ reset-names = "ehci_ohci", "hs-usb-if";
+ status = "disabled";
+ };
+
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a774b1-usb-dmac",
"renesas,usb-dmac";
@@ -2160,6 +2175,23 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a774b1-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x4000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ clock-names = "rpc";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sata: sata@ee300000 {
compatible = "renesas,sata-r8a774b1",
"renesas,rcar-gen3-sata";
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index e0e54342cd4c..20fa3caa050e 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1654,6 +1654,23 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a774c0-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x4000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ clock-names = "rpc";
+ power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
new file mode 100644
index 000000000000..273f062f2909
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774e1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+ model = "Beacon Embedded Works RZ/G2H Development Kit";
+ compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1";
+
+ aliases {
+ serial0 = &scif2;
+ serial1 = &hscif0;
+ serial2 = &hscif1;
+ serial3 = &scif0;
+ serial4 = &hscif2;
+ serial5 = &scif5;
+ serial6 = &scif4;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+/* Reference versaclock instead of audio_clk_a */
+&rcar_sound {
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&versaclock6_bb 4>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A774E1_CLK_S0D4>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 1333b02d623a..8eb006cbd9af 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -890,6 +890,21 @@
status = "disabled";
};
+ usb2_clksel: clock-controller@e6590630 {
+ compatible = "renesas,r8a774e1-rcar-usb2-clock-sel",
+ "renesas,rcar-gen3-usb2-clock-sel";
+ reg = <0 0xe6590630 0 0x02>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&usb_extal_clk>, <&usb3s0_clk>;
+ clock-names = "ehci_ohci", "hs-usb-if",
+ "usb_extal", "usb_xtal";
+ #clock-cells = <0>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ reset-names = "ehci_ohci", "hs-usb-if";
+ status = "disabled";
+ };
+
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a774e1-usb-dmac",
"renesas,usb-dmac";
@@ -2393,6 +2408,23 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a774e1-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x4000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ clock-names = "rpc";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sata: sata@ee300000 {
compatible = "renesas,sata-r8a774e1",
"renesas,rcar-gen3-sata";
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 9d60bcf69e4f..5c39152e4570 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -616,6 +616,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 53b9aa26c9b1..25d947a81b29 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -585,6 +585,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 4b737c616257..e8c31ebec097 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -453,6 +453,76 @@
reg = <0 0xe6060000 0 0x50c>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77961-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77961-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77961-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77961-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77961-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -495,6 +565,71 @@
/* placeholder */
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 4a913df17b1d..657b20d3533b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -455,6 +455,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 422ec53740cb..04d47c0c9bb9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -217,6 +217,8 @@
vqmmc-supply = <&vddq_vin01>;
mmc-hs200-1_8v;
bus-width = <8>;
+ no-sd;
+ no-sdio;
non-removable;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index e0ccca2222d2..f74f8b9993f1 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -712,6 +712,8 @@
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
+ no-sd;
+ no-sdio;
non-removable;
full-pwr-cycle-in-suspend;
status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 87d41bc076a9..5010f23fafcc 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -420,6 +420,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 8f471881b7a3..6783c3ad0856 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -496,6 +496,8 @@
vqmmc-supply = <&reg_1p8v>;
bus-width = <8>;
mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
non-removable;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index e1af7c4782f4..2319271c881b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -193,6 +193,76 @@
reg = <0 0xe6060000 0 0x508>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77995-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77995-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77995-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77995-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77995-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -242,6 +312,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index 4ba269a4cec8..fa284a7260d6 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -5,6 +5,7 @@
* Copyright (C) 2020 Renesas Electronics Corp.
*/
+#include <dt-bindings/gpio/gpio.h>
#include "r8a779a0.dtsi"
/ {
@@ -31,6 +32,40 @@
device_type = "memory";
reg = <0x7 0x00000000 0x0 0x80000000>;
};
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&avb0 {
+ pinctrl-0 = <&avb0_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ tx-internal-delay-ps = <2000>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ };
};
&extal_clk {
@@ -41,6 +76,109 @@
clock-frequency = <32768>;
};
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&i2c6 {
+ pinctrl-0 = <&i2c6_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&mmc0 {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-1 = <&mmc_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ full-pwr-cycle-in-suspend;
+ status = "okay";
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb0_pins: avb0 {
+ mux {
+ groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+ function = "avb0";
+ };
+
+ pins_mdio {
+ groups = "avb0_mdio";
+ drive-strength = <21>;
+ };
+
+ pins_mii {
+ groups = "avb0_rgmii";
+ drive-strength = <21>;
+ };
+
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ i2c6_pins: i2c6 {
+ groups = "i2c6";
+ function = "i2c6";
+ };
+
+ mmc_pins: mmc {
+ groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ scif0_pins: scif0 {
+ groups = "scif0_data", "scif0_ctrl";
+ function = "scif0";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk";
+ function = "scif_clk";
+ };
+};
+
&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
status = "okay";
};
+
+&scif_clk {
+ clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
index 8eda70e5a82b..5617b81dd7dc 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -13,6 +13,7 @@
compatible = "renesas,falcon-breakout", "renesas,falcon-cpu", "renesas,r8a779a0";
aliases {
+ ethernet0 = &avb0;
serial0 = &scif0;
};
@@ -20,3 +21,8 @@
stdout-path = "serial0:115200n8";
};
};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 6cf77ce9aa93..dfd6ae8b564f 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -14,6 +14,16 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -70,6 +80,165 @@
#size-cells = <2>;
ranges;
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a779a0-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
+ status = "disabled";
+ };
+
+ pfc: pin-controller@e6050000 {
+ compatible = "renesas,pfc-r8a779a0";
+ reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
+ <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>,
+ <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>,
+ <0 0xe6068000 0 0x16c>, <0 0xe6068800 0 0x16c>,
+ <0 0xe6069000 0 0x16c>, <0 0xe6069800 0 0x16c>;
+ };
+
+ gpio0: gpio@e6058180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6058180 0 0x54>;
+ interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 0 28>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@e6050180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6050180 0 0x54>;
+ interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 32 31>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@e6050980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6050980 0 0x54>;
+ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 64 25>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@e6058980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6058980 0 0x54>;
+ interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 96 17>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@e6060180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6060180 0 0x54>;
+ interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 128 27>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@e6060980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6060980 0 0x54>;
+ interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 160 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@e6068180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6068180 0 0x54>;
+ interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 192 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio@e6068980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6068980 0 0x54>;
+ interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 224 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio8: gpio@e6069180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6069180 0 0x54>;
+ interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 256 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio9: gpio@e6069980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6069980 0 0x54>;
+ interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 288 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a779a0-cpg-mssr";
reg = <0 0xe6150000 0 0x4000>;
@@ -91,6 +260,464 @@
#power-domain-cells = <1>;
};
+ i2c0: i2c@e6500000 {
+ compatible = "renesas,i2c-r8a779a0",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ compatible = "renesas,i2c-r8a779a0",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ compatible = "renesas,i2c-r8a779a0",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ compatible = "renesas,i2c-r8a779a0",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 521>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 521>;
+ dmas = <&dmac1 0x97>, <&dmac1 0x96>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ compatible = "renesas,i2c-r8a779a0",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ dmas = <&dmac1 0x99>, <&dmac1 0x98>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ compatible = "renesas,i2c-r8a779a0",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ dmas = <&dmac1 0x9b>, <&dmac1 0x9a>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ compatible = "renesas,i2c-r8a779a0",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 524>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 524>;
+ dmas = <&dmac1 0x9d>, <&dmac1 0x9c>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a779a0",
+ "renesas,rcar-gen3-hscif", "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>,
+ <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a779a0",
+ "renesas,rcar-gen3-hscif", "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>,
+ <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a779a0",
+ "renesas,rcar-gen3-hscif", "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a779a0",
+ "renesas,rcar-gen3-hscif", "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x37>, <&dmac1 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ avb0: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a779a0",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6800000 0 0x800>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 211>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ avb1: ethernet@e6810000 {
+ compatible = "renesas,etheravb-r8a779a0",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6810000 0 0x800>;
+ interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 212>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 212>;
+ phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ avb2: ethernet@e6820000 {
+ compatible = "renesas,etheravb-r8a779a0",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6820000 0 0x1000>;
+ interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 213>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 213>;
+ phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ avb3: ethernet@e6830000 {
+ compatible = "renesas,etheravb-r8a779a0",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6830000 0 0x1000>;
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 214>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 214>;
+ phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ avb4: ethernet@e6840000 {
+ compatible = "renesas,etheravb-r8a779a0",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6840000 0 0x1000>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 215>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 215>;
+ phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ avb5: ethernet@e6850000 {
+ compatible = "renesas,etheravb-r8a779a0",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6850000 0 0x1000>;
+ interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 216>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
+ phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a779a0",
"renesas,rcar-gen3-scif", "renesas,scif";
@@ -100,11 +727,221 @@
<&cpg CPG_CORE R8A779A0_CLK_S1D2>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>;
+ dma-names = "tx", "rx";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
};
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a779a0",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>,
+ <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a779a0",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>,
+ <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x57>, <&dmac1 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a779a0",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>,
+ <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x59>, <&dmac1 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ status = "disabled";
+ };
+
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a779a0",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 618>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 618>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a779a0",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 619>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 619>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a779a0",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 620>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 620>;
+ dmas = <&dmac1 0x45>, <&dmac1 0x44>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a779a0",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 621>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 621>;
+ dmas = <&dmac1 0x47>, <&dmac1 0x46>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof4: spi@e6c20000 {
+ compatible = "renesas,msiof-r8a779a0",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c20000 0 0x0064>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+ dmas = <&dmac1 0x49>, <&dmac1 0x48>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof5: spi@e6c28000 {
+ compatible = "renesas,msiof-r8a779a0",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c28000 0 0x0064>;
+ interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+ dmas = <&dmac1 0x4b>, <&dmac1 0x4a>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ dmac1: dma-controller@e7350000 {
+ compatible = "renesas,dmac-r8a779a0";
+ reg = <0 0xe7350000 0 0x1000>,
+ <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3", "ch4",
+ "ch5", "ch6", "ch7", "ch8", "ch9",
+ "ch10", "ch11", "ch12", "ch13",
+ "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 709>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 709>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac2: dma-controller@e7351000 {
+ compatible = "renesas,dmac-r8a779a0";
+ reg = <0 0xe7351000 0 0x1000>,
+ <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3", "ch4",
+ "ch5", "ch6", "ch7";
+ clocks = <&cpg CPG_MOD 710>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 710>;
+ #dma-cells = <1>;
+ dma-channels = <8>;
+ };
+
+ mmc0: mmc@ee140000 {
+ compatible = "renesas,sdhi-r8a779a0",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 706>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 706>;
+ max-frequency = <200000000>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 6c643ed74fc5..c22bb38994e8 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -831,6 +831,8 @@
bus-width = <8>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
+ no-sd;
+ no-sdio;
non-removable;
fixed-emmc-driver-type = <1>;
full-pwr-cycle-in-suspend;
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 8f8d7371d8e2..a04eae55dd6c 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -468,6 +468,8 @@
bus-width = <8>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
+ no-sd;
+ no-sdio;
non-removable;
full-pwr-cycle-in-suspend;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 1ab55a124a87..62d3abc17a24 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
@@ -33,6 +34,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 64193292d26c..c45b0cfcae09 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -25,6 +25,9 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
+ mmc0 = &sdmmc;
+ mmc1 = &sdio;
+ mmc2 = &emmc;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -703,22 +706,15 @@
clock-names = "pclk", "timer";
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dmac: dmac@ff240000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff240000 0x0 0x4000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
+ dmac: dmac@ff240000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff240000 0x0 0x4000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
};
tsadc: tsadc@ff280000 {
@@ -973,6 +969,21 @@
status = "disabled";
};
+ nfc: nand-controller@ff3b0000 {
+ compatible = "rockchip,px30-nfc";
+ reg = <0x0 0xff3b0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+ clock-names = "ahb", "nfc";
+ assigned-clocks = <&cru SCLK_NANDC>;
+ assigned-clock-rates = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
+ &flash_rdn &flash_rdy &flash_wrn &flash_dqs>;
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ status = "disabled";
+ };
+
gpu: gpu@ff400000 {
compatible = "rockchip,px30-mali", "arm,mali-bifrost";
reg = <0x0 0xff400000 0x0 0x4000>;
@@ -1107,102 +1118,102 @@
};
qos_gmac: qos@ff518000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff518000 0x0 0x20>;
};
qos_gpu: qos@ff520000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff520000 0x0 0x20>;
};
qos_sdmmc: qos@ff52c000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff52c000 0x0 0x20>;
};
qos_emmc: qos@ff538000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff538000 0x0 0x20>;
};
qos_nand: qos@ff538080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff538080 0x0 0x20>;
};
qos_sdio: qos@ff538100 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff538100 0x0 0x20>;
};
qos_sfc: qos@ff538180 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff538180 0x0 0x20>;
};
qos_usb_host: qos@ff540000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff540000 0x0 0x20>;
};
qos_usb_otg: qos@ff540080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff540080 0x0 0x20>;
};
qos_isp_128: qos@ff548000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548000 0x0 0x20>;
};
qos_isp_rd: qos@ff548080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548080 0x0 0x20>;
};
qos_isp_wr: qos@ff548100 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548100 0x0 0x20>;
};
qos_isp_m1: qos@ff548180 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548180 0x0 0x20>;
};
qos_vip: qos@ff548200 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548200 0x0 0x20>;
};
qos_rga_rd: qos@ff550000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff550000 0x0 0x20>;
};
qos_rga_wr: qos@ff550080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff550080 0x0 0x20>;
};
qos_vop_m0: qos@ff550100 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff550100 0x0 0x20>;
};
qos_vop_m1: qos@ff550180 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff550180 0x0 0x20>;
};
qos_vpu: qos@ff558000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff558000 0x0 0x20>;
};
qos_vpu_r128: qos@ff558080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff558080 0x0 0x20>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 2560b98771ca..3a035a189450 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -24,6 +24,9 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
+ mmc0 = &sdmmc;
+ mmc1 = &emmc;
+ mmc2 = &sdio;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -513,33 +516,26 @@
status = "disabled";
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ dmac0: dma-controller@ff2c0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff2c0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
- dmac0: dma-controller@ff2c0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff2c0000 0x0 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
-
- dmac1: dma-controller@ff2d0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff2d0000 0x0 0x4000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
+ dmac1: dma-controller@ff2d0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff2d0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
};
i2s_2ch_0: i2s@ff350000 {
@@ -629,6 +625,21 @@
status = "disabled";
};
+ nfc: nand-controller@ff4b0000 {
+ compatible = "rockchip,rk3308-nfc",
+ "rockchip,rv1108-nfc";
+ reg = <0x0 0xff4b0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+ clock-names = "ahb", "nfc";
+ assigned-clocks = <&cru SCLK_NANDC>;
+ assigned-clock-rates = <150000000>;
+ pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
+ &flash_rdn &flash_rdy &flash_wrn>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
cru: clock-controller@ff500000 {
compatible = "rockchip,rk3308-cru";
reg = <0x0 0xff500000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 1eecad724f04..faf496d789cf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -50,6 +50,7 @@
sys_led: led-1 {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
label = "nanopi-r2s:red:sys";
+ default-state = "on";
};
wan_led: led-2 {
@@ -284,7 +285,7 @@
};
};
- ethernet-phy {
+ gmac2io {
eth_phy_reset_pin: eth-phy-reset-pin {
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
new file mode 100644
index 000000000000..2d71ca7e429c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2020 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on ./rk3328-rock64.dts, which is
+ *
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3328.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi E";
+ compatible = "radxa,rockpi-e", "rockchip,rk3328";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1750000>;
+
+ /* This button is unpopulated out of the factory. */
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pin>;
+ pinctrl-names = "default";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0m1_pin>;
+ regulator-name = "vcc_sd";
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_host_5v: vcc-host-5v-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_host_drv>;
+ enable-active-high;
+ regulator-name = "vcc_host_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc_wifi: vcc-wifi-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_en>;
+ regulator-name = "vcc_wifi";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&analog_sound {
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_emmc>;
+ status = "okay";
+};
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ clock_in_out = "input";
+ phy-handle = <&rtl8211e>;
+ phy-mode = "rgmii";
+ phy-supply = <&vcc_io>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ snps,aal;
+ snps,rxpbl = <0x4>;
+ snps,txpbl = <0x4>;
+ tx_delay = <0x26>;
+ rx_delay = <0x11>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: ethernet-phy@1 {
+ reg = <1>;
+ pinctrl-0 = <&eth_phy_int_pin>, <&eth_phy_reset_pin>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gmac2phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fephyled_linkm1>, <&fephyled_rxm1>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: pmic@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vcc_18";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc18_emmc";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&i2s1 {
+ status = "okay";
+};
+
+&io_domains {
+ pmuio-supply = <&vcc_io>;
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_io>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&pinctrl {
+ ephy {
+ eth_phy_int_pin: eth-phy-int-pin {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ eth_phy_reset_pin: eth-phy-reset-pin {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ leds {
+ led_pin: led-pin {
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb3 {
+ usb30_host_drv: usb30-host-drv {
+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_en: wifi-en {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_18>;
+ status = "okay";
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 86cfb5c50a94..c984662043da 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -84,34 +84,32 @@
};
};
- sound {
- compatible = "audio-graph-card";
- label = "rockchip,rk3328";
- dais = <&i2s1_p0
- &spdif_p0>;
+ spdif_sound: spdif-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_dit>;
+ };
};
- spdif-dit {
+ spdif_dit: spdif-dit {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
-
- port {
- dit_p0_0: endpoint {
- remote-endpoint = <&spdif_p0_0>;
- };
- };
};
};
+&analog_sound {
+ status = "okay";
+};
+
&codec {
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
status = "okay";
-
- port@0 {
- codec_p0_0: endpoint {
- remote-endpoint = <&i2s1_p0_0>;
- };
- };
};
&cpu0 {
@@ -163,6 +161,10 @@
status = "okay";
};
+&hdmi_sound {
+ status = "okay";
+};
+
&hdmiphy {
status = "okay";
};
@@ -278,16 +280,12 @@
};
};
-&i2s1 {
+&i2s0 {
status = "okay";
+};
- i2s1_p0: port {
- i2s1_p0_0: endpoint {
- dai-format = "i2s";
- mclk-fs = <256>;
- remote-endpoint = <&codec_p0_0>;
- };
- };
+&i2s1 {
+ status = "okay";
};
&io_domains {
@@ -337,12 +335,6 @@
&spdif {
pinctrl-0 = <&spdifm0_tx>;
status = "okay";
-
- spdif_p0: port {
- spdif_p0_0: endpoint {
- remote-endpoint = <&dit_p0_0>;
- };
- };
};
&spi0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index db0d5c8e5f96..063ed0adbec4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -27,6 +27,9 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
+ mmc0 = &sdmmc;
+ mmc1 = &sdio;
+ mmc2 = &emmc;
ethernet0 = &gmac2io;
ethernet1 = &gmac2phy;
};
@@ -142,24 +145,6 @@
};
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dmac: dmac@ff1f0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff1f0000 0x0 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
- };
-
analog_sound: analog-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -504,6 +489,17 @@
status = "disabled";
};
+ dmac: dmac@ff1f0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff1f0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
thermal-zones {
soc_thermal: soc-thermal {
polling-delay-passive = <20>;
@@ -928,6 +924,7 @@
phy-mode = "rmii";
phy-handle = <&phy>;
snps,txpbl = <0x4>;
+ clock_in_out = "output";
status = "disabled";
mdio {
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 3746f23dc3df..7af68ec3feae 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -25,6 +25,9 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ mmc0 = &sdmmc;
+ mmc1 = &sdio0;
+ mmc2 = &emmc;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -136,37 +139,6 @@
};
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dmac_peri: dma-controller@ff250000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff250000 0x0 0x4000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-broken-no-flushp;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC_PERI>;
- clock-names = "apb_pclk";
- };
-
- dmac_bus: dma-controller@ff600000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff600000 0x0 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- arm,pl330-broken-no-flushp;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC_BUS>;
- clock-names = "apb_pclk";
- };
- };
-
arm-pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
@@ -399,8 +371,20 @@
status = "disabled";
};
+ dmac_peri: dma-controller@ff250000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff250000 0x0 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC_PERI>;
+ clock-names = "apb_pclk";
+ };
+
thermal-zones {
- cpu {
+ cpu_thermal: cpu-thermal {
polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
@@ -444,7 +428,7 @@
};
};
- gpu {
+ gpu_thermal: gpu-thermal {
polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
@@ -532,6 +516,18 @@
status = "disabled";
};
+ dmac_bus: dma-controller@ff600000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff600000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC_BUS>;
+ clock-names = "apb_pclk";
+ };
+
i2c0: i2c@ff650000 {
compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
reg = <0x0 0xff650000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 2a561be724b2..66c725a34220 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -331,7 +331,7 @@
pmic {
pmic_int_l: pmic-int-l {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index e0d75617bb7e..452728b82e42 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -95,6 +95,7 @@
};
&pcie0 {
+ ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
vpcie3v3-supply = <&vcc3v3_sys>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
new file mode 100644
index 000000000000..72182c58cc46
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4B board device tree source
+ *
+ * Copyright (c) 2020 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi-m4.dts"
+
+/ {
+ model = "FriendlyElec NanoPi M4B";
+ compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1500000>;
+ poll-interval = <100>;
+
+ recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <18000>;
+ };
+ };
+};
+
+/* No USB type-C PD power manager */
+/delete-node/ &fusb0;
+
+&i2c4 {
+ status = "disabled";
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb2>;
+};
+
+&u2phy0_otg {
+ phy-supply = <&vbus_typec>;
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+ enable-active-high;
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 76a8b40a93c6..48ed4aaa37f3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -504,7 +504,6 @@
};
&pcie0 {
- ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
max-link-speed = <2>;
num-lanes = <2>;
vpcie0v9-supply = <&vcca0v9_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
index c88295782e7b..1a23e8f3cdf6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
@@ -63,6 +63,20 @@
};
+&cpu_alert0 {
+ temperature = <65000>;
+};
+
+&cpu_thermal {
+ sustainable-power = <1550>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ };
+ };
+};
+
&pcie0 {
ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
};
@@ -125,45 +139,6 @@
status = "okay";
};
-&thermal_zones {
- cpu_thermal: cpu {
- polling-delay-passive = <100>;
- polling-delay = <1000>;
- thermal-sensors = <&tsadc 0>;
- sustainable-power = <1550>;
-
- trips {
- cpu_alert0: cpu_alert0 {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_alert1: cpu_alert1 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu_crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
-
- trip = <&cpu_alert1>;
- cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-};
-
&usbdrd_dwc3_0 {
dr_mode = "otg";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6e553ff47534..5ab0b9edfc88 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -72,10 +72,27 @@
sound {
compatible = "audio-graph-card";
- label = "rockchip,rk3399";
+ label = "Analog";
dais = <&i2s1_p0>;
};
+ sound-dit {
+ compatible = "audio-graph-card";
+ label = "SPDIF";
+ dais = <&spdif_p0>;
+ };
+
+ spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port {
+ dit_p0_0: endpoint {
+ remote-endpoint = <&spdif_p0_0>;
+ };
+ };
+ };
+
vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -698,6 +715,16 @@
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdif_bus_1>;
+
+ spdif_p0: port {
+ spdif_p0_0: endpoint {
+ remote-endpoint = <&dit_p0_0>;
+ };
+ };
+};
+
&spi1 {
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 2551b238b97c..edbbf35fe19e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -200,35 +200,6 @@
#clock-cells = <0>;
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dmac_bus: dma-controller@ff6d0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff6d0000 0x0 0x4000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
- #dma-cells = <1>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC0_PERILP>;
- clock-names = "apb_pclk";
- };
-
- dmac_peri: dma-controller@ff6e0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff6e0000 0x0 0x4000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
- #dma-cells = <1>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC1_PERILP>;
- clock-names = "apb_pclk";
- };
- };
-
pcie0: pcie@f8000000 {
compatible = "rockchip,rk3399-pcie";
reg = <0x0 0xf8000000 0x0 0x2000000>,
@@ -259,8 +230,8 @@
<&pcie_phy 2>, <&pcie_phy 3>;
phy-names = "pcie-phy-0", "pcie-phy-1",
"pcie-phy-2", "pcie-phy-3";
- ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000
- 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
+ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+ <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
@@ -764,7 +735,7 @@
};
thermal_zones: thermal-zones {
- cpu_thermal: cpu {
+ cpu_thermal: cpu-thermal {
polling-delay-passive = <100>;
polling-delay = <1000>;
@@ -808,7 +779,7 @@
};
};
- gpu_thermal: gpu {
+ gpu_thermal: gpu-thermal {
polling-delay-passive = <100>;
polling-delay = <1000>;
@@ -858,127 +829,127 @@
};
qos_emmc: qos@ffa58000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa58000 0x0 0x20>;
};
qos_gmac: qos@ffa5c000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa5c000 0x0 0x20>;
};
qos_pcie: qos@ffa60080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa60080 0x0 0x20>;
};
qos_usb_host0: qos@ffa60100 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa60100 0x0 0x20>;
};
qos_usb_host1: qos@ffa60180 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa60180 0x0 0x20>;
};
qos_usb_otg0: qos@ffa70000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa70000 0x0 0x20>;
};
qos_usb_otg1: qos@ffa70080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa70080 0x0 0x20>;
};
qos_sd: qos@ffa74000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa74000 0x0 0x20>;
};
qos_sdioaudio: qos@ffa76000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa76000 0x0 0x20>;
};
qos_hdcp: qos@ffa90000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa90000 0x0 0x20>;
};
qos_iep: qos@ffa98000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa98000 0x0 0x20>;
};
qos_isp0_m0: qos@ffaa0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffaa0000 0x0 0x20>;
};
qos_isp0_m1: qos@ffaa0080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffaa0080 0x0 0x20>;
};
qos_isp1_m0: qos@ffaa8000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffaa8000 0x0 0x20>;
};
qos_isp1_m1: qos@ffaa8080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffaa8080 0x0 0x20>;
};
qos_rga_r: qos@ffab0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffab0000 0x0 0x20>;
};
qos_rga_w: qos@ffab0080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffab0080 0x0 0x20>;
};
qos_video_m0: qos@ffab8000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffab8000 0x0 0x20>;
};
qos_video_m1_r: qos@ffac0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffac0000 0x0 0x20>;
};
qos_video_m1_w: qos@ffac0080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffac0080 0x0 0x20>;
};
qos_vop_big_r: qos@ffac8000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffac8000 0x0 0x20>;
};
qos_vop_big_w: qos@ffac8080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffac8080 0x0 0x20>;
};
qos_vop_little: qos@ffad0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffad0000 0x0 0x20>;
};
qos_perihp: qos@ffad8080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffad8080 0x0 0x20>;
};
qos_gpu: qos@ffae0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffae0000 0x0 0x20>;
};
@@ -1350,6 +1321,28 @@
};
};
+ dmac_bus: dma-controller@ff6d0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6d0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC0_PERILP>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac_peri: dma-controller@ff6e0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6e0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC1_PERILP>;
+ clock-names = "apb_pclk";
+ };
+
pmucru: pmu-clock-controller@ff750000 {
compatible = "rockchip,rk3399-pmucru";
reg = <0x0 0xff750000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi
index addeb0efc616..4bb5d650df9c 100644
--- a/arch/arm64/boot/dts/synaptics/as370.dtsi
+++ b/arch/arm64/boot/dts/synaptics/as370.dtsi
@@ -143,7 +143,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -161,7 +161,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
index 15625b99e336..0949acee4728 100644
--- a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
@@ -140,7 +140,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -158,7 +158,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -176,7 +176,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -194,7 +194,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -269,7 +269,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
};
};
@@ -284,7 +284,7 @@
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 12591a854020..ceb579fb427d 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -256,7 +256,7 @@
#size-cells = <0>;
};
- sdhci0: sdhci@4f80000 {
+ sdhci0: mmc@4f80000 {
compatible = "ti,am654-sdhci-5.1";
reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>;
@@ -280,7 +280,7 @@
dma-coherent;
};
- sdhci1: sdhci@4fa0000 {
+ sdhci1: mmc@4fa0000 {
compatible = "ti,am654-sdhci-5.1";
reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>;
power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index d84c0bc05023..a9fc1af03f27 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -56,7 +56,7 @@
};
pmu: pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
/* Recommendation from GIC500 TRM Table A.3 */
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 331b388e1d1b..4a7182abccf5 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -6,8 +6,10 @@
/dts-v1/;
#include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/mux/ti-serdes.h>
+#include <dt-bindings/phy/phy.h>
/ {
chosen {
@@ -218,3 +220,39 @@
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
+
+&serdes_refclk {
+ clock-frequency = <100000000>;
+};
+
+&serdes0 {
+ serdes0_pcie_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <2>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+ };
+
+ serdes0_qsgmii_link: phy@1 {
+ reg = <2>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_QSGMII>;
+ resets = <&serdes_wiz0 3>;
+ };
+};
+
+&pcie1_rc {
+ reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+};
+
+&pcie1_ep {
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index b0094212aa82..17477ab0fd8e 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -2,9 +2,16 @@
/*
* Device Tree Source for J7200 SoC Family Main Domain peripherals
*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
*/
+/ {
+ serdes_refclk: serdes-refclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+};
+
&cbass_main {
msmc_ram: sram@70000000 {
compatible = "mmio-sram";
@@ -499,8 +506,8 @@
reg = <0x00 0x04f80000 0x00 0x260>, <0x00 0x4f88000 0x00 0x134>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
- clock-names = "clk_xin", "clk_ahb";
- clocks = <&k3_clks 91 3>, <&k3_clks 91 0>;
+ clock-names = "clk_ahb", "clk_xin";
+ clocks = <&k3_clks 91 0>, <&k3_clks 91 3>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-ddr52 = <0x6>;
@@ -518,8 +525,8 @@
reg = <0x00 0x04fb0000 0x00 0x260>, <0x00 0x4fb8000 0x00 0x134>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
- clock-names = "clk_xin", "clk_ahb";
- clocks = <&k3_clks 92 2>, <&k3_clks 92 1>;
+ clock-names = "clk_ahb", "clk_xin";
+ clocks = <&k3_clks 92 1>, <&k3_clks 92 2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
@@ -531,6 +538,110 @@
dma-coherent;
};
+ serdes_wiz0: wiz@5060000 {
+ compatible = "ti,j721e-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+ assigned-clocks = <&k3_clks 292 85>;
+ assigned-clock-parents = <&k3_clks 292 89>;
+
+ wiz0_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-output-names = "wiz0_pll0_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 292 85>;
+ };
+
+ wiz0_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-output-names = "wiz0_pll1_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 292 85>;
+ };
+
+ wiz0_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-output-names = "wiz0_refclk_dig";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 292 85>;
+ };
+
+ wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz0_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ serdes0: serdes@5060000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05060000 0x00010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz0 0>;
+ reset-names = "torrent_reset";
+ clocks = <&wiz0_pll0_refclk>;
+ clock-names = "refclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ pcie1_rc: pcie@2910000 {
+ compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 240 6>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ cdns,no-bar-match-nbits = <64>;
+ vendor-id = /bits/ 16 <0x104c>;
+ device-id = /bits/ 16 <0xb00f>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ };
+
+ pcie1_ep: pcie-ep@2910000 {
+ compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 240 6>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ dma-coherent;
+ };
+
usbss0: cdns-usb@4104000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x4104000 0x00 0x100>;
@@ -560,4 +671,44 @@
dr_mode = "otg";
};
};
+
+ main_r5fss0: r5fss@5c00000 {
+ compatible = "ti,j7200-r5fss";
+ ti,cluster-mode = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+ <0x5d00000 0x00 0x5d00000 0x20000>;
+ power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+
+ main_r5fss0_core0: r5f@5c00000 {
+ compatible = "ti,j7200-r5f";
+ reg = <0x5c00000 0x00010000>,
+ <0x5c10000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <245>;
+ ti,sci-proc-ids = <0x06 0xff>;
+ resets = <&k3_reset 245 1>;
+ firmware-name = "j7200-main-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+
+ main_r5fss0_core1: r5f@5d00000 {
+ compatible = "ti,j7200-r5f";
+ reg = <0x5d00000 0x00008000>,
+ <0x5d10000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <246>;
+ ti,sci-proc-ids = <0x07 0xff>;
+ resets = <&k3_reset 246 1>;
+ firmware-name = "j7200-main-r5f0_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index bb1fe9c12e44..359e3e8a8cd0 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_mcu_wakeup {
@@ -289,4 +289,44 @@
compatible = "ti,am3359-adc";
};
};
+
+ mcu_r5fss0: r5fss@41000000 {
+ compatible = "ti,j7200-r5fss";
+ ti,cluster-mode = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x41000000 0x00 0x41000000 0x20000>,
+ <0x41400000 0x00 0x41400000 0x20000>;
+ power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+
+ mcu_r5fss0_core0: r5f@41000000 {
+ compatible = "ti,j7200-r5f";
+ reg = <0x41000000 0x00010000>,
+ <0x41010000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <250>;
+ ti,sci-proc-ids = <0x01 0xff>;
+ resets = <&k3_reset 250 1>;
+ firmware-name = "j7200-mcu-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+
+ mcu_r5fss0_core1: r5f@41400000 {
+ compatible = "ti,j7200-r5f";
+ reg = <0x41400000 0x00008000>,
+ <0x41410000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <251>;
+ ti,sci-proc-ids = <0x02 0xff>;
+ resets = <&k3_reset 251 1>;
+ firmware-name = "j7200-mcu-r5f0_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 7b5e9aa0324e..a988e2ab2ba1 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
@@ -25,6 +25,60 @@
alignment = <0x1000>;
no-map;
};
+
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: ipc-memories@a4000000 {
+ reg = <0x00 0xa4000000 0x00 0x00800000>;
+ alignment = <0x1000>;
+ no-map;
+ };
};
};
@@ -141,6 +195,30 @@
status = "disabled";
};
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+ memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+ <&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+};
+
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index 66169bcf7c9a..b7005b803149 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -114,7 +114,7 @@
};
pmu: pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a72-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index b32df591c766..8c84dafb7125 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -28,38 +28,6 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x00100000 0x1c000>;
- pcie0_ctrl: syscon@4070 {
- compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
- reg = <0x00004070 0x4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x4070 0x4070 0x4>;
- };
-
- pcie1_ctrl: syscon@4074 {
- compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
- reg = <0x00004074 0x4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x4074 0x4074 0x4>;
- };
-
- pcie2_ctrl: syscon@4078 {
- compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
- reg = <0x00004078 0x4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x4078 0x4078 0x4>;
- };
-
- pcie3_ctrl: syscon@407c {
- compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
- reg = <0x0000407c 0x4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x407c 0x407c 0x4>;
- };
-
serdes_ln_ctrl: mux@4080 {
compatible = "mmio-mux";
reg = <0x00004080 0x50>;
@@ -618,7 +586,7 @@
interrupt-names = "link_state";
interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
device_type = "pci";
- ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
max-link-speed = <3>;
num-lanes = <2>;
power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
@@ -645,13 +613,12 @@
reg-names = "intd_cfg", "user_cfg", "reg", "mem";
interrupt-names = "link_state";
interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
max-link-speed = <3>;
num-lanes = <2>;
power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 239 1>;
clock-names = "fck";
- cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <6>;
max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
dma-coherent;
@@ -667,7 +634,7 @@
interrupt-names = "link_state";
interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
device_type = "pci";
- ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
max-link-speed = <3>;
num-lanes = <2>;
power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
@@ -694,13 +661,12 @@
reg-names = "intd_cfg", "user_cfg", "reg", "mem";
interrupt-names = "link_state";
interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
max-link-speed = <3>;
num-lanes = <2>;
power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 240 1>;
clock-names = "fck";
- cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <6>;
max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
dma-coherent;
@@ -716,7 +682,7 @@
interrupt-names = "link_state";
interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
device_type = "pci";
- ti,syscon-pcie-ctrl = <&pcie2_ctrl>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
max-link-speed = <3>;
num-lanes = <2>;
power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
@@ -743,13 +709,12 @@
reg-names = "intd_cfg", "user_cfg", "reg", "mem";
interrupt-names = "link_state";
interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&pcie2_ctrl>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
max-link-speed = <3>;
num-lanes = <2>;
power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 241 1>;
clock-names = "fck";
- cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <6>;
max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
dma-coherent;
@@ -765,7 +730,7 @@
interrupt-names = "link_state";
interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
device_type = "pci";
- ti,syscon-pcie-ctrl = <&pcie3_ctrl>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
max-link-speed = <3>;
num-lanes = <2>;
power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
@@ -792,13 +757,12 @@
reg-names = "intd_cfg", "user_cfg", "reg", "mem";
interrupt-names = "link_state";
interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&pcie3_ctrl>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
max-link-speed = <3>;
num-lanes = <2>;
power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 242 1>;
clock-names = "fck";
- cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <6>;
max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
dma-coherent;
@@ -1068,13 +1032,13 @@
clock-names = "gpio";
};
- main_sdhci0: sdhci@4f80000 {
+ main_sdhci0: mmc@4f80000 {
compatible = "ti,j721e-sdhci-8bit";
reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
- clock-names = "clk_xin", "clk_ahb";
- clocks = <&k3_clks 91 1>, <&k3_clks 91 0>;
+ clock-names = "clk_ahb", "clk_xin";
+ clocks = <&k3_clks 91 0>, <&k3_clks 91 1>;
assigned-clocks = <&k3_clks 91 1>;
assigned-clock-parents = <&k3_clks 91 2>;
bus-width = <8>;
@@ -1090,13 +1054,13 @@
dma-coherent;
};
- main_sdhci1: sdhci@4fb0000 {
+ main_sdhci1: mmc@4fb0000 {
compatible = "ti,j721e-sdhci-4bit";
reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
- clock-names = "clk_xin", "clk_ahb";
- clocks = <&k3_clks 92 0>, <&k3_clks 92 5>;
+ clock-names = "clk_ahb", "clk_xin";
+ clocks = <&k3_clks 92 5>, <&k3_clks 92 0>;
assigned-clocks = <&k3_clks 92 0>;
assigned-clock-parents = <&k3_clks 92 1>;
ti,otap-del-sel-legacy = <0x0>;
@@ -1110,13 +1074,13 @@
dma-coherent;
};
- main_sdhci2: sdhci@4f98000 {
+ main_sdhci2: mmc@4f98000 {
compatible = "ti,j721e-sdhci-4bit";
reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
- clock-names = "clk_xin", "clk_ahb";
- clocks = <&k3_clks 93 0>, <&k3_clks 93 5>;
+ clock-names = "clk_ahb", "clk_xin";
+ clocks = <&k3_clks 93 5>, <&k3_clks 93 0>;
assigned-clocks = <&k3_clks 93 0>;
assigned-clock-parents = <&k3_clks 93 1>;
ti,otap-del-sel-legacy = <0x0>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index cc483f7344af..f0587fde147e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -115,7 +115,7 @@
};
pmu: pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a72-pmu";
/* Recommendation from GIC500 TRM Table A.3 */
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
index 48fa8776e36f..bf0620afe117 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
@@ -59,3 +59,12 @@
};
};
};
+
+&wdt {
+ status = "okay";
+ clocks = <&wdt_clk>;
+};
+
+&gpio {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
index 3366786699fc..17934fd9a14c 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -148,6 +148,12 @@
clock-output-names = "clk300mhz";
};
+ wdt_clk: wdt-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <150000000>;
+ #clock-cells = <0>;
+ };
+
soc {
#address-cells = <2>;
#size-cells = <2>;
@@ -171,6 +177,17 @@
reg = <0 0x24190000 0 0x10000>;
};
+ gpio: gpio@28020000 {
+ compatible = "toshiba,gpio-tmpv7708";
+ reg = <0 0x28020000 0 0x1000>;
+ #gpio-cells = <0x2>;
+ gpio-ranges = <&pmux 0 0 32>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ };
+
uart0: serial@28200000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0 0x28200000 0 0x1000>;
@@ -409,6 +426,12 @@
snps,tso;
status = "disabled";
};
+
+ wdt: wdt@28330000 {
+ compatible = "toshiba,visconti-wdt";
+ reg = <0 0x28330000 0 0x1000>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index 60f5443f3ef4..11fb4fd3ebd4 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -13,5 +13,6 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index c94c3bb67edc..cf5295224750 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -116,6 +116,10 @@
clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
+&nand0 {
+ clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
&gem0 {
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
<&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
@@ -160,6 +164,10 @@
clocks = <&zynqmp_clk PCIE_REF>;
};
+&qspi {
+ clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
&sata {
clocks = <&zynqmp_clk SATA_REF>;
};
@@ -215,3 +223,17 @@
&watchdog0 {
clocks = <&zynqmp_clk WDT>;
};
+
+&lpd_watchdog {
+ clocks = <&zynqmp_clk LPD_WDT>;
+};
+
+&zynqmp_dpdma {
+ clocks = <&zynqmp_clk DPDMA_REF>;
+};
+
+&zynqmp_dpsub {
+ clocks = <&zynqmp_clk TOPSW_LSBUS>,
+ <&zynqmp_clk DP_AUDIO_REF>,
+ <&zynqmp_clk DP_VIDEO_REF>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 68ecd0f7b2f2..a53598c3624b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -15,6 +15,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU100 RevC";
@@ -108,6 +109,18 @@
compatible = "iio-hwmon";
io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
};
+
+ si5335a_0: clk26 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ si5335a_1: clk27 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
&dcc {
@@ -224,6 +237,13 @@
};
};
+&psgtr {
+ status = "okay";
+ /* usb3, dps */
+ clocks = <&si5335a_0>, <&si5335a_1>;
+ clock-names = "ref0", "ref1";
+};
+
&rtc {
status = "okay";
};
@@ -233,11 +253,13 @@
status = "okay";
no-1-8-v;
disable-wp;
+ xlnx,mio-bank = <0>;
};
&sdhci1 {
status = "okay";
bus-width = <0x4>;
+ xlnx,mio-bank = <0>;
non-removable;
disable-wp;
cap-power-off-card;
@@ -293,3 +315,14 @@
&watchdog0 {
status = "okay";
};
+
+&zynqmp_dpdma {
+ status = "okay";
+};
+
+&zynqmp_dpsub {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+ <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index f1255f635dfd..12e8bd48dc8c 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -13,6 +13,7 @@
#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU102 RevA";
@@ -132,6 +133,19 @@
compatible = "iio-hwmon";
io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
};
+
+ /* 48MHz reference crystal */
+ ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ refhdmi: refhdmi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <114285000>;
+ };
};
&can1 {
@@ -483,9 +497,56 @@
#size-cells = <0>;
reg = <1>;
si5341: clock-generator@36 { /* SI5341 - u69 */
+ compatible = "silabs,si5341";
reg = <0x36>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ref48>;
+ clock-names = "xtal";
+ clock-output-names = "si5341";
+
+ si5341_0: out@0 {
+ /* refclk0 for PS-GT, used for DP */
+ reg = <0>;
+ always-on;
+ };
+ si5341_2: out@2 {
+ /* refclk2 for PS-GT, used for USB3 */
+ reg = <2>;
+ always-on;
+ };
+ si5341_3: out@3 {
+ /* refclk3 for PS-GT, used for SATA */
+ reg = <3>;
+ always-on;
+ };
+ si5341_4: out@4 {
+ /* refclk4 for PS-GT, used for PCIE slot */
+ reg = <4>;
+ always-on;
+ };
+ si5341_5: out@5 {
+ /* refclk5 for PS-GT, used for PCIE */
+ reg = <5>;
+ always-on;
+ };
+ si5341_6: out@6 {
+ /* refclk6 PL CLK125 */
+ reg = <6>;
+ always-on;
+ };
+ si5341_7: out@7 {
+ /* refclk7 PL CLK74 */
+ reg = <7>;
+ always-on;
+ };
+ si5341_9: out@9 {
+ /* refclk9 used for PS_REF_CLK 33.3 MHz */
+ reg = <9>;
+ always-on;
+ };
};
-
};
i2c@2 {
#address-cells = <1>;
@@ -526,6 +587,17 @@
* interrupt-parent = <&>;
* interrupts = <>;
*/
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ clocks = <&refhdmi>;
+ clock-names = "xtal";
+ clock-output-names = "si5328";
+
+ si5328_clk: clk0@0 {
+ reg = <0>;
+ clock-frequency = <27000000>;
+ };
};
};
/* 5 - 7 unconnected */
@@ -592,6 +664,13 @@
status = "okay";
};
+&psgtr {
+ status = "okay";
+ /* pcie, sata, usb3, dp */
+ clocks = <&si5341 0 5>, <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+ clock-names = "ref0", "ref1", "ref2", "ref3";
+};
+
&rtc {
status = "okay";
};
@@ -607,12 +686,15 @@
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
no-1-8-v;
+ xlnx,mio-bank = <1>;
};
&uart0 {
@@ -632,3 +714,13 @@
&watchdog0 {
status = "okay";
};
+
+&zynqmp_dpdma {
+ status = "okay";
+};
+
+&zynqmp_dpsub {
+ status = "okay";
+ phy-names = "dp-phy0";
+ phys = <&psgtr 1 PHY_TYPE_DP 0 3>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index 7a4614e3f5fa..5637e1c17fdf 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -12,6 +12,7 @@
#include "zynqmp.dtsi"
#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU104 RevA";
@@ -36,6 +37,24 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
+
+ clock_8t49n287_5: clk125 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clock_8t49n287_2: clk26 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ clock_8t49n287_3: clk27 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
&can1 {
@@ -158,6 +177,13 @@
status = "okay";
};
+&psgtr {
+ status = "okay";
+ /* nc, sata, usb3, dp */
+ clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
+ clock-names = "ref1", "ref2", "ref3";
+};
+
&sata {
status = "okay";
/* SATA OOB timing settings */
@@ -169,12 +195,15 @@
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
no-1-8-v;
+ xlnx,mio-bank = <1>;
disable-wp;
};
@@ -195,3 +224,14 @@
&watchdog0 {
status = "okay";
};
+
+&zynqmp_dpdma {
+ status = "okay";
+};
+
+&zynqmp_dpsub {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+ <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
new file mode 100644
index 000000000000..7f2e32831b05
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP ZCU104
+ *
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU104 RevC";
+ compatible = "xlnx,zynqmp-zcu104-revC", "xlnx,zynqmp-zcu104", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ i2c0 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &dcc;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ ina226 {
+ compatible = "iio-hwmon";
+ io-channels = <&u183 0>, <&u183 1>, <&u183 2>, <&u183 3>;
+ };
+
+ clock_8t49n287_5: clk125 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clock_8t49n287_2: clk26 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ clock_8t49n287_3: clk27 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&dcc {
+ status = "okay";
+};
+
+&fpd_dma_chan1 {
+ status = "okay";
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+};
+
+&gem3 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: ethernet-phy@c {
+ reg = <0xc>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416_u97: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - IRPS5401_ALERT_B
+ * 1 - HDMI_8T49N241_INT_ALM
+ * 2 - MAX6643_OT_B
+ * 3 - MAX6643_FANFAIL_B
+ * 5 - IIC_MUX_RESET_B
+ * 6 - GEM3_EXP_RESET_B
+ * 7 - FMC_LPC_PRSNT_M2C_B
+ * 4, 10 - 17 - not connected
+ */
+ };
+
+ /* Another connection to this bus via PL i2c via PCA9306 - u45 */
+ i2c-mux@74 { /* u34 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom: eeprom@54 { /* u23 */
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
+ reg = <0x6c>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
+ compatible = "infineon,irps5401";
+ reg = <0x43>; /* pmbus / i2c 0x13 */
+ };
+ irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
+ compatible = "infineon,irps5401";
+ reg = <0x44>; /* pmbus / i2c 0x14 */
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ u183: ina226@40 { /* u183 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ };
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ /* 4, 6 not connected */
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&psgtr {
+ status = "okay";
+ /* nc, sata, usb3, dp */
+ clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
+ clock-names = "ref1", "ref2", "ref3";
+};
+
+&sata {
+ status = "okay";
+ /* SATA OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ no-1-8-v;
+ xlnx,mio-bank = <1>;
+ disable-wp;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&watchdog0 {
+ status = "okay";
+};
+
+&zynqmp_dpdma {
+ status = "okay";
+};
+
+&zynqmp_dpsub {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+ <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 6e9efe233838..18771e868399 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -13,6 +13,7 @@
#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU106 RevA";
@@ -132,6 +133,19 @@
compatible = "iio-hwmon";
io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
};
+
+ /* 48MHz reference crystal */
+ ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ refhdmi: refhdmi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <114285000>;
+ };
};
&can1 {
@@ -142,6 +156,17 @@
status = "okay";
};
+&zynqmp_dpdma {
+ status = "okay";
+};
+
+&zynqmp_dpsub {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+ <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
+
/* fpd_dma clk 667MHz, lpd_dma 500MHz */
&fpd_dma_chan1 {
status = "okay";
@@ -482,7 +507,45 @@
#size-cells = <0>;
reg = <1>;
si5341: clock-generator@36 { /* SI5341 - u69 */
+ compatible = "silabs,si5341";
reg = <0x36>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ref48>;
+ clock-names = "xtal";
+ clock-output-names = "si5341";
+
+ si5341_0: out@0 {
+ /* refclk0 for PS-GT, used for DP */
+ reg = <0>;
+ always-on;
+ };
+ si5341_2: out@2 {
+ /* refclk2 for PS-GT, used for USB3 */
+ reg = <2>;
+ always-on;
+ };
+ si5341_3: out@3 {
+ /* refclk3 for PS-GT, used for SATA */
+ reg = <3>;
+ always-on;
+ };
+ si5341_6: out@6 {
+ /* refclk6 PL CLK125 */
+ reg = <6>;
+ always-on;
+ };
+ si5341_7: out@7 {
+ /* refclk7 PL CLK74 */
+ reg = <7>;
+ always-on;
+ };
+ si5341_9: out@9 {
+ /* refclk9 used for PS_REF_CLK 33.3 MHz */
+ reg = <9>;
+ always-on;
+ };
};
};
@@ -520,6 +583,22 @@
reg = <4>;
si5328: clock-generator@69 {/* SI5328 - u20 */
reg = <0x69>;
+ /*
+ * Chip has interrupt present connected to PL
+ * interrupt-parent = <&>;
+ * interrupts = <>;
+ */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ clocks = <&refhdmi>;
+ clock-names = "xtal";
+ clock-output-names = "si5328";
+
+ si5328_clk: clk0@0 {
+ reg = <0>;
+ clock-frequency = <27000000>;
+ };
};
};
i2c@5 {
@@ -591,6 +670,13 @@
};
};
+&psgtr {
+ status = "okay";
+ /* nc, sata, usb3, dp */
+ clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+ clock-names = "ref1", "ref2", "ref3";
+};
+
&rtc {
status = "okay";
};
@@ -606,12 +692,15 @@
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
no-1-8-v;
+ xlnx,mio-bank = <1>;
};
&uart0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 2e92634c77f9..d4b68f0d0098 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -13,6 +13,7 @@
#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU111 RevA";
@@ -116,6 +117,13 @@
compatible = "iio-hwmon";
io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
};
+
+ /* 48MHz reference crystal */
+ ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
};
&dcc {
@@ -374,9 +382,46 @@
#size-cells = <0>;
reg = <1>;
si5341: clock-generator@36 { /* SI5341 - u46 */
+ compatible = "silabs,si5341";
reg = <0x36>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ref48>;
+ clock-names = "xtal";
+ clock-output-names = "si5341";
+
+ si5341_0: out@0 {
+ /* refclk0 for PS-GT, used for DP */
+ reg = <0>;
+ always-on;
+ };
+ si5341_2: out@2 {
+ /* refclk2 for PS-GT, used for USB3 */
+ reg = <2>;
+ always-on;
+ };
+ si5341_3: out@3 {
+ /* refclk3 for PS-GT, used for SATA */
+ reg = <3>;
+ always-on;
+ };
+ si5341_5: out@5 {
+ /* refclk5 PL CLK100 */
+ reg = <5>;
+ always-on;
+ };
+ si5341_6: out@6 {
+ /* refclk6 PL CLK125 */
+ reg = <6>;
+ always-on;
+ };
+ si5341_9: out@9 {
+ /* refclk9 used for PS_REF_CLK 33.3 MHz */
+ reg = <9>;
+ always-on;
+ };
};
-
};
i2c@2 {
#address-cells = <1>;
@@ -410,7 +455,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- si5328: clock-generator@69 { /* SI5328 - u48 */
+ si5382: clock-generator@69 { /* SI5382 - u48 */
reg = <0x69>;
};
};
@@ -497,6 +542,13 @@
};
};
+&psgtr {
+ status = "okay";
+ /* nc, sata, usb3, dp */
+ clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+ clock-names = "ref1", "ref2", "ref3";
+};
+
&rtc {
status = "okay";
};
@@ -512,12 +564,15 @@
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
no-1-8-v;
+ xlnx,mio-bank = <1>;
};
&uart0 {
@@ -529,3 +584,14 @@
status = "okay";
dr_mode = "host";
};
+
+&zynqmp_dpdma {
+ status = "okay";
+};
+
+&zynqmp_dpsub {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+ <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 68923fbd0e89..a3b391d18787 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -12,6 +12,7 @@
* the License, or (at your option) any later version.
*/
+#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
@@ -99,7 +100,7 @@
};
};
- zynqmp_ipi {
+ zynqmp_ipi: zynqmp_ipi {
compatible = "xlnx,zynqmp-ipi-mailbox";
interrupt-parent = <&gic>;
interrupts = <0 35 4>;
@@ -187,6 +188,11 @@
xlnx_aes: zynqmp-aes {
compatible = "xlnx,zynqmp-aes";
};
+
+ zynqmp_reset: reset-controller {
+ compatible = "xlnx,zynqmp-reset";
+ #reset-cells = <1>;
+ };
};
};
@@ -265,6 +271,8 @@
interrupts = <0 124 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14e8>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -276,6 +284,8 @@
interrupts = <0 125 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14e9>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -287,6 +297,8 @@
interrupts = <0 126 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ea>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -298,6 +310,8 @@
interrupts = <0 127 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14eb>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -309,6 +323,8 @@
interrupts = <0 128 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ec>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -320,6 +336,8 @@
interrupts = <0 129 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ed>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -331,6 +349,8 @@
interrupts = <0 130 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ee>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -342,11 +362,14 @@
interrupts = <0 131 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ef>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
gic: interrupt-controller@f9010000 {
compatible = "arm,gic-400";
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x0 0xf9010000 0x0 0x10000>,
<0x0 0xf9020000 0x0 0x20000>,
@@ -369,6 +392,8 @@
interrupts = <0 77 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x868>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -380,6 +405,8 @@
interrupts = <0 78 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x869>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -391,6 +418,8 @@
interrupts = <0 79 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86a>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -402,6 +431,8 @@
interrupts = <0 80 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86b>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -413,6 +444,8 @@
interrupts = <0 81 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86c>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -424,6 +457,8 @@
interrupts = <0 82 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86d>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -435,6 +470,8 @@
interrupts = <0 83 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86e>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -446,6 +483,8 @@
interrupts = <0 84 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86f>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -456,6 +495,20 @@
interrupts = <0 112 4>;
};
+ nand0: nand-controller@ff100000 {
+ compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
+ status = "disabled";
+ reg = <0x0 0xff100000 0x0 0x1000>;
+ clock-names = "controller", "bus";
+ interrupt-parent = <&gic>;
+ interrupts = <0 14 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x872>;
+ power-domains = <&zynqmp_firmware PD_NAND>;
+ };
+
gem0: ethernet@ff0b0000 {
compatible = "cdns,zynqmp-gem", "cdns,gem";
status = "disabled";
@@ -465,6 +518,8 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x874>;
power-domains = <&zynqmp_firmware PD_ETH_0>;
};
@@ -477,6 +532,8 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x875>;
power-domains = <&zynqmp_firmware PD_ETH_1>;
};
@@ -489,6 +546,8 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x876>;
power-domains = <&zynqmp_firmware PD_ETH_2>;
};
@@ -501,12 +560,15 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x877>;
power-domains = <&zynqmp_firmware PD_ETH_3>;
};
gpio: gpio@ff0a0000 {
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
+ #address-cells = <0>;
#gpio-cells = <0x2>;
gpio-controller;
interrupt-parent = <&gic>;
@@ -576,6 +638,22 @@
};
};
+ qspi: spi@ff0f0000 {
+ compatible = "xlnx,zynqmp-qspi-1.0";
+ status = "disabled";
+ clock-names = "ref_clk", "pclk";
+ interrupts = <0 15 4>;
+ interrupt-parent = <&gic>;
+ num-cs = <1>;
+ reg = <0x0 0xff0f0000 0x0 0x1000>,
+ <0x0 0xc0000000 0x0 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x873>;
+ power-domains = <&zynqmp_firmware PD_QSPI>;
+ };
+
psgtr: phy@fd400000 {
compatible = "xlnx,zynqmp-psgtr-v1.1";
status = "disabled";
@@ -602,6 +680,9 @@
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
power-domains = <&zynqmp_firmware PD_SATA>;
+ #stream-id-cells = <4>;
+ iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
+ <&smmu 0x4c2>, <&smmu 0x4c3>;
};
sdhci0: mmc@ff160000 {
@@ -611,6 +692,8 @@
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x870>;
#clock-cells = <1>;
clock-output-names = "clk_out_sd0", "clk_in_sd0";
power-domains = <&zynqmp_firmware PD_SD_0>;
@@ -623,6 +706,8 @@
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x871>;
#clock-cells = <1>;
clock-output-names = "clk_out_sd1", "clk_in_sd1";
power-domains = <&zynqmp_firmware PD_SD_1>;
@@ -631,6 +716,7 @@
smmu: iommu@fd800000 {
compatible = "arm,mmu-500";
reg = <0x0 0xfd800000 0x0 0x20000>;
+ #iommu-cells = <1>;
status = "disabled";
#global-interrupts = <1>;
interrupt-parent = <&gic>;
@@ -753,5 +839,45 @@
reg = <0x0 0xfd4d0000 0x0 0x1000>;
timeout-sec = <10>;
};
+
+ lpd_watchdog: watchdog@ff150000 {
+ compatible = "cdns,wdt-r1p2";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 52 1>;
+ reg = <0x0 0xff150000 0x0 0x1000>;
+ timeout-sec = <10>;
+ };
+
+ zynqmp_dpdma: dma-controller@fd4c0000 {
+ compatible = "xlnx,zynqmp-dpdma";
+ status = "disabled";
+ reg = <0x0 0xfd4c0000 0x0 0x1000>;
+ interrupts = <0 122 4>;
+ interrupt-parent = <&gic>;
+ clock-names = "axi_clk";
+ #dma-cells = <1>;
+ };
+
+ zynqmp_dpsub: display@fd4a0000 {
+ compatible = "xlnx,zynqmp-dpsub-1.7";
+ status = "disabled";
+ reg = <0x0 0xfd4a0000 0x0 0x1000>,
+ <0x0 0xfd4aa000 0x0 0x1000>,
+ <0x0 0xfd4ab000 0x0 0x1000>,
+ <0x0 0xfd4ac000 0x0 0x1000>;
+ reg-names = "dp", "blend", "av_buf", "aud";
+ interrupts = <0 119 4>;
+ interrupt-parent = <&gic>;
+ clock-names = "dp_apb_clk", "dp_aud_clk",
+ "dp_vtc_pixel_clk_in";
+ power-domains = <&zynqmp_firmware PD_DP>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
+ dma-names = "vid0", "vid1", "vid2", "gfx0";
+ dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
+ <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
+ <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
+ <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+ };
};
};
diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
index ab8b8a737a0a..9cfcc3baa52c 100644
--- a/include/dt-bindings/clock/tegra210-car.h
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -307,7 +307,7 @@
#define TEGRA210_CLK_AUDIO4 275
#define TEGRA210_CLK_SPDIF 276
/* 277 */
-/* 278 */
+#define TEGRA210_CLK_QSPI_PM 278
/* 279 */
/* 280 */
#define TEGRA210_CLK_SOR0_LVDS 281 /* deprecated */