summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml61
-rw-r--r--Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml168
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt1
-rw-r--r--Documentation/devicetree/bindings/firmware/arm,scmi.yaml8
-rw-r--r--Documentation/devicetree/bindings/power/qcom,rpmpd.yaml1
-rw-r--r--Documentation/devicetree/bindings/power/rockchip-io-domain.txt135
-rw-r--r--Documentation/devicetree/bindings/power/rockchip-io-domain.yaml360
-rw-r--r--Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml5
-rw-r--r--Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml4
-rw-r--r--Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml65
-rw-r--r--Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml88
-rw-r--r--Documentation/devicetree/bindings/reset/uniphier-reset.txt61
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt87
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml114
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml3
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/rockchip/grf.yaml19
-rw-r--r--Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml41
-rw-r--r--MAINTAINERS5
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi8
-rw-r--r--arch/arm/mach-omap2/pm34xx.c5
-rw-r--r--arch/arm/mach-tegra/pm.c2
-rw-r--r--arch/arm/mach-tegra/pm.h6
-rw-r--r--arch/arm/mach-tegra/tegra.c2
-rw-r--r--drivers/ata/pata_ixp4xx_cf.c264
-rw-r--r--drivers/bus/Kconfig11
-rw-r--r--drivers/bus/Makefile1
-rw-r--r--drivers/bus/intel-ixp4xx-eb.c429
-rw-r--r--drivers/bus/ti-sysc.c17
-rw-r--r--drivers/clocksource/timer-ixp4xx.c48
-rw-r--r--drivers/dma/imx-sdma.c93
-rw-r--r--drivers/firmware/Kconfig36
-rw-r--r--drivers/firmware/Makefile3
-rw-r--r--drivers/firmware/arm_scmi/Kconfig95
-rw-r--r--drivers/firmware/arm_scmi/Makefile8
-rw-r--r--drivers/firmware/arm_scmi/common.h113
-rw-r--r--drivers/firmware/arm_scmi/driver.c686
-rw-r--r--drivers/firmware/arm_scmi/mailbox.c2
-rw-r--r--drivers/firmware/arm_scmi/msg.c111
-rw-r--r--drivers/firmware/arm_scmi/smc.c3
-rw-r--r--drivers/firmware/arm_scmi/virtio.c491
-rw-r--r--drivers/firmware/qcom_scm.c8
-rw-r--r--drivers/firmware/tegra/bpmp-debugfs.c58
-rw-r--r--drivers/iommu/Kconfig2
-rw-r--r--drivers/memory/omap-gpmc.c191
-rw-r--r--drivers/memory/tegra/tegra186.c2
-rw-r--r--drivers/net/wireless/ath/ath10k/Kconfig1
-rw-r--r--drivers/reset/Kconfig8
-rw-r--r--drivers/reset/Makefile1
-rw-r--r--drivers/reset/reset-qcom-pdc.c62
-rw-r--r--drivers/reset/reset-rzg2l-usbphy-ctrl.c175
-rw-r--r--drivers/soc/mediatek/mt8173-pm-domains.h1
-rw-r--r--drivers/soc/mediatek/mt8183-mmsys.h21
-rw-r--r--drivers/soc/mediatek/mt8365-mmsys.h60
-rw-r--r--drivers/soc/mediatek/mtk-mmsys.c18
-rw-r--r--drivers/soc/mediatek/mtk-mmsys.h137
-rw-r--r--drivers/soc/mediatek/mtk-pm-domains.h2
-rw-r--r--drivers/soc/qcom/cpr.c43
-rw-r--r--drivers/soc/qcom/mdt_loader.c18
-rw-r--r--drivers/soc/qcom/qcom-geni-se.c30
-rw-r--r--drivers/soc/qcom/qcom_aoss.c9
-rw-r--r--drivers/soc/qcom/rpmhpd.c5
-rw-r--r--drivers/soc/qcom/rpmpd.c28
-rw-r--r--drivers/soc/qcom/smd-rpm.c1
-rw-r--r--drivers/soc/qcom/smsm.c28
-rw-r--r--drivers/soc/qcom/socinfo.c4
-rw-r--r--drivers/soc/renesas/Kconfig2
-rw-r--r--drivers/soc/renesas/r8a779a0-sysc.c6
-rw-r--r--drivers/soc/renesas/rcar-sysc.c6
-rw-r--r--drivers/soc/renesas/renesas-soc.c4
-rw-r--r--drivers/soc/rockchip/Kconfig4
-rw-r--r--drivers/soc/rockchip/io-domain.c88
-rw-r--r--drivers/soc/tegra/fuse/fuse-tegra.c60
-rw-r--r--drivers/soc/tegra/fuse/fuse-tegra20.c11
-rw-r--r--drivers/soc/tegra/fuse/fuse-tegra30.c16
-rw-r--r--drivers/soc/tegra/fuse/fuse.h2
-rw-r--r--drivers/soc/tegra/pmc.c14
-rw-r--r--drivers/soc/tegra/powergate-bpmp.c1
-rw-r--r--drivers/soc/ti/pruss.c1
-rw-r--r--drivers/soc/ti/smartreflex.c52
-rw-r--r--drivers/spi/spi-imx.c41
-rw-r--r--drivers/watchdog/Kconfig1
-rw-r--r--drivers/watchdog/ixp4xx_wdt.c283
-rw-r--r--include/dt-bindings/power/qcom-rpmpd.h10
-rw-r--r--include/dt-bindings/reset/qcom,sdm845-pdc.h2
-rw-r--r--include/linux/omap-gpmc.h3
-rw-r--r--include/linux/platform_data/pata_ixp4xx_cf.h4
-rw-r--r--include/linux/power/smartreflex.h2
-rw-r--r--include/linux/qcom-geni-se.h19
-rw-r--r--include/soc/tegra/pm.h6
-rw-r--r--include/uapi/linux/virtio_ids.h1
-rw-r--r--include/uapi/linux/virtio_scmi.h24
93 files changed, 4207 insertions, 1032 deletions
diff --git a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
new file mode 100644
index 000000000000..52e18600ecff
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/intel,ixp4xx-compact-flash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx CompactFlash Card Controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ The IXP4xx network processors have a CompactFlash interface that presents
+ a CompactFlash card to the system as a true IDE (parallel ATA) device. The
+ device is always connected to the expansion bus of the IXP4xx SoCs using one
+ or two chip select areas and address translating logic on the board. The
+ node must be placed inside a chip select node on the IXP4xx expansion bus.
+
+properties:
+ compatible:
+ const: intel,ixp4xx-compact-flash
+
+ reg:
+ items:
+ - description: Command interface registers
+ - description: Control interface registers
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: pata-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus@c4000000 {
+ compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+ reg = <0xc4000000 0x1000>;
+ native-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>;
+ dma-ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>;
+ ide@1,0 {
+ compatible = "intel,ixp4xx-compact-flash";
+ reg = <1 0x00000000 0x1000>, <1 0x00040000 0x1000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
new file mode 100644
index 000000000000..5fb4e7bfa4da
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/intel,ixp4xx-expansion-bus-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx Expansion Bus Controller
+
+description: |
+ The IXP4xx expansion bus controller handles access to devices on the
+ memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+ including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ $nodename:
+ pattern: '^bus@[0-9a-f]+$'
+
+ compatible:
+ items:
+ - enum:
+ - intel,ixp42x-expansion-bus-controller
+ - intel,ixp43x-expansion-bus-controller
+ - intel,ixp45x-expansion-bus-controller
+ - intel,ixp46x-expansion-bus-controller
+ - const: syscon
+
+ reg:
+ description: Control registers for the expansion bus, these are not
+ inside the memory range handled by the expansion bus.
+ maxItems: 1
+
+ native-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: The IXP4xx has a peculiar MMIO access scheme, as it changes
+ the access pattern for words (swizzling) on the bus depending on whether
+ the SoC is running in big-endian or little-endian mode. Thus the
+ registers must always be accessed using native endianness.
+
+ "#address-cells":
+ description: |
+ The first cell is the chip select number.
+ The second cell is the address offset within the bank.
+ const: 2
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+ dma-ranges: true
+
+patternProperties:
+ "^.*@[0-7],[0-9a-f]+$":
+ description: Devices attached to chip selects are represented as
+ subnodes.
+ type: object
+
+ properties:
+ intel,ixp4xx-eb-t1:
+ description: Address timing, extend address phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ intel,ixp4xx-eb-t2:
+ description: Setup chip select timing, extend setup phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ intel,ixp4xx-eb-t3:
+ description: Strobe timing, extend strobe phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+
+ intel,ixp4xx-eb-t4:
+ description: Hold timing, extend hold phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ intel,ixp4xx-eb-t5:
+ description: Recovery timing, extend recovery phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+
+ intel,ixp4xx-eb-cycle-type:
+ description: The type of cycles to use on the expansion bus for this
+ chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+ intel,ixp4xx-eb-byte-access-on-halfword:
+ description: Allow byte read access on half word devices.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-hpi-hrdy-pol-high:
+ description: Set HPI HRDY polarity to active high when using HPI.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-mux-address-and-data:
+ description: Multiplex address and data on the data bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-ahb-split-transfers:
+ description: Enable AHB split transfers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-write-enable:
+ description: Enable write cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-byte-access:
+ description: Expansion bus uses only 8 bits. The default is to use
+ 16 bits.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+required:
+ - compatible
+ - reg
+ - native-endian
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - dma-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ bus@50000000 {
+ compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+ reg = <0xc4000000 0x28>;
+ native-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x50000000 0x01000000>,
+ <1 0x0 0x51000000 0x01000000>;
+ dma-ranges = <0 0x0 0x50000000 0x01000000>,
+ <1 0x0 0x51000000 0x01000000>;
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ reg = <0 0x00000000 0x1000000>;
+ intel,ixp4xx-eb-t3 = <3>;
+ intel,ixp4xx-eb-cycle-type = <0>;
+ intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <0>;
+ };
+ serial@1,0 {
+ compatible = "exar,xr16l2551", "ns8250";
+ reg = <1 0x00000000 0x10>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ clock-frequency = <1843200>;
+ intel,ixp4xx-eb-t3 = <3>;
+ intel,ixp4xx-eb-cycle-type = <1>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index c9e97409e853..12c316ff4834 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,7 @@ Required properties:
"fsl,imx53-sdma"
"fsl,imx6q-sdma"
"fsl,imx7d-sdma"
+ "fsl,imx6ul-sdma"
"fsl,imx8mq-sdma"
"fsl,imx8mm-sdma"
"fsl,imx8mn-sdma"
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index cebf6ffe70d5..5c4c6782e052 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -34,6 +34,10 @@ properties:
- description: SCMI compliant firmware with ARM SMC/HVC transport
items:
- const: arm,scmi-smc
+ - description: SCMI compliant firmware with SCMI Virtio transport.
+ The virtio transport only supports a single device.
+ items:
+ - const: arm,scmi-virtio
interrupts:
description:
@@ -172,6 +176,7 @@ patternProperties:
Each sub-node represents a protocol supported. If the platform
supports a dedicated communication channel for a particular protocol,
then the corresponding transport properties must be present.
+ The virtio transport does not support a dedicated communication channel.
properties:
reg:
@@ -195,7 +200,6 @@ patternProperties:
required:
- compatible
- - shmem
if:
properties:
@@ -209,6 +213,7 @@ then:
required:
- mboxes
+ - shmem
else:
if:
@@ -219,6 +224,7 @@ else:
then:
required:
- arm,smc-id
+ - shmem
examples:
- |
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 4807b560f00d..239f37881cae 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -30,6 +30,7 @@ properties:
- qcom,sc8180x-rpmhpd
- qcom,sdm845-rpmhpd
- qcom,sdx55-rpmhpd
+ - qcom,sm6115-rpmpd
- qcom,sm8150-rpmhpd
- qcom,sm8250-rpmhpd
- qcom,sm8350-rpmhpd
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
deleted file mode 100644
index e66fd4eab71c..000000000000
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-Rockchip SRAM for IO Voltage Domains:
--------------------------------------
-
-IO domain voltages on some Rockchip SoCs are variable but need to be
-kept in sync between the regulators and the SoC using a special
-register.
-
-A specific example using rk3288:
-- If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
- bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to
- that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
-
-Said another way, this driver simply handles keeping bits in the SoC's
-general register file (GRF) in sync with the actual value of a voltage
-hooked up to the pins.
-
-Note that this driver specifically doesn't include:
-- any logic for deciding what voltage we should set regulators to
-- any logic for deciding whether regulators (or internal SoC blocks)
- should have power or not have power
-
-If there were some other software that had the smarts of making
-decisions about regulators, it would work in conjunction with this
-driver. When that other software adjusted a regulator's voltage then
-this driver would handle telling the SoC about it. A good example is
-vqmmc for SD. In that case the dw_mmc driver simply is told about a
-regulator. It changes the regulator between 3.3V and 1.8V at the
-right time. This driver notices the change and makes sure that the
-SoC is on the same page.
-
-
-Required properties:
-- compatible: should be one of:
- - "rockchip,px30-io-voltage-domain" for px30
- - "rockchip,px30-pmu-io-voltage-domain" for px30 pmu-domains
- - "rockchip,rk3188-io-voltage-domain" for rk3188
- - "rockchip,rk3228-io-voltage-domain" for rk3228
- - "rockchip,rk3288-io-voltage-domain" for rk3288
- - "rockchip,rk3328-io-voltage-domain" for rk3328
- - "rockchip,rk3368-io-voltage-domain" for rk3368
- - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
- - "rockchip,rk3399-io-voltage-domain" for rk3399
- - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains
- - "rockchip,rv1108-io-voltage-domain" for rv1108
- - "rockchip,rv1108-pmu-io-voltage-domain" for rv1108 pmu-domains
-
-Deprecated properties:
-- rockchip,grf: phandle to the syscon managing the "general register files"
- Systems should move the io-domains to a sub-node of the grf simple-mfd.
-
-You specify supplies using the standard regulator bindings by including
-a phandle the relevant regulator. All specified supplies must be able
-to report their voltage. The IO Voltage Domain for any non-specified
-supplies will be not be touched.
-
-Possible supplies for PX30:
-- vccio6-supply: The supply connected to VCCIO6.
-- vccio1-supply: The supply connected to VCCIO1.
-- vccio2-supply: The supply connected to VCCIO2.
-- vccio3-supply: The supply connected to VCCIO3.
-- vccio4-supply: The supply connected to VCCIO4.
-- vccio5-supply: The supply connected to VCCIO5.
-- vccio-oscgpi-supply: The supply connected to VCCIO_OSCGPI.
-
-Possible supplies for PX30 pmu-domains:
-- pmuio1-supply: The supply connected to PMUIO1.
-- pmuio2-supply: The supply connected to PMUIO2.
-
-Possible supplies for rk3188:
-- ap0-supply: The supply connected to AP0_VCC.
-- ap1-supply: The supply connected to AP1_VCC.
-- cif-supply: The supply connected to CIF_VCC.
-- flash-supply: The supply connected to FLASH_VCC.
-- lcdc0-supply: The supply connected to LCD0_VCC.
-- lcdc1-supply: The supply connected to LCD1_VCC.
-- vccio0-supply: The supply connected to VCCIO0.
-- vccio1-supply: The supply connected to VCCIO1.
- Sometimes also labeled VCCIO1 and VCCIO2.
-
-Possible supplies for rk3228:
-- vccio1-supply: The supply connected to VCCIO1.
-- vccio2-supply: The supply connected to VCCIO2.
-- vccio3-supply: The supply connected to VCCIO3.
-- vccio4-supply: The supply connected to VCCIO4.
-
-Possible supplies for rk3288:
-- audio-supply: The supply connected to APIO4_VDD.
-- bb-supply: The supply connected to APIO5_VDD.
-- dvp-supply: The supply connected to DVPIO_VDD.
-- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC
-- flash1-supply: The supply connected to FLASH1_VDD. Also known as SDIO1.
-- gpio30-supply: The supply connected to APIO1_VDD.
-- gpio1830 The supply connected to APIO2_VDD.
-- lcdc-supply: The supply connected to LCDC_VDD.
-- sdcard-supply: The supply connected to SDMMC0_VDD.
-- wifi-supply: The supply connected to APIO3_VDD. Also known as SDIO0.
-
-Possible supplies for rk3368:
-- audio-supply: The supply connected to APIO3_VDD.
-- dvp-supply: The supply connected to DVPIO_VDD.
-- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC
-- gpio30-supply: The supply connected to APIO1_VDD.
-- gpio1830 The supply connected to APIO4_VDD.
-- sdcard-supply: The supply connected to SDMMC0_VDD.
-- wifi-supply: The supply connected to APIO2_VDD. Also known as SDIO0.
-
-Possible supplies for rk3368 pmu-domains:
-- pmu-supply: The supply connected to PMUIO_VDD.
-- vop-supply: The supply connected to LCDC_VDD.
-
-Possible supplies for rk3399:
-- bt656-supply: The supply connected to APIO2_VDD.
-- audio-supply: The supply connected to APIO5_VDD.
-- sdmmc-supply: The supply connected to SDMMC0_VDD.
-- gpio1830 The supply connected to APIO4_VDD.
-
-Possible supplies for rk3399 pmu-domains:
-- pmu1830-supply:The supply connected to PMUIO2_VDD.
-
-Example:
-
- io-domains {
- compatible = "rockchip,rk3288-io-voltage-domain";
- rockchip,grf = <&grf>;
-
- audio-supply = <&vcc18_codec>;
- bb-supply = <&vcc33_io>;
- dvp-supply = <&vcc_18>;
- flash0-supply = <&vcc18_flashio>;
- gpio1830-supply = <&vcc33_io>;
- gpio30-supply = <&vcc33_pmuio>;
- lcdc-supply = <&vcc33_lcd>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vcc18_wl>;
- };
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
new file mode 100644
index 000000000000..1727bf108979
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
@@ -0,0 +1,360 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SRAM for IO Voltage Domains
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ IO domain voltages on some Rockchip SoCs are variable but need to be
+ kept in sync between the regulators and the SoC using a special
+ register.
+
+ A specific example using rk3288
+ If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
+ bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to
+ that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
+
+ Said another way, this driver simply handles keeping bits in the SoCs
+ General Register File (GRF) in sync with the actual value of a voltage
+ hooked up to the pins.
+
+ Note that this driver specifically does not include
+ any logic for deciding what voltage we should set regulators to
+ any logic for deciding whether regulators (or internal SoC blocks)
+ should have power or not have power
+
+ If there were some other software that had the smarts of making
+ decisions about regulators, it would work in conjunction with this
+ driver. When that other software adjusted a regulators voltage then
+ this driver would handle telling the SoC about it. A good example is
+ vqmmc for SD. In that case the dw_mmc driver simply is told about a
+ regulator. It changes the regulator between 3.3V and 1.8V at the
+ right time. This driver notices the change and makes sure that the
+ SoC is on the same page.
+
+ You specify supplies using the standard regulator bindings by including
+ a phandle the relevant regulator. All specified supplies must be able
+ to report their voltage. The IO Voltage Domain for any non-specified
+ supplies will be not be touched.
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-io-voltage-domain
+ - rockchip,px30-pmu-io-voltage-domain
+ - rockchip,rk3188-io-voltage-domain
+ - rockchip,rk3228-io-voltage-domain
+ - rockchip,rk3288-io-voltage-domain
+ - rockchip,rk3328-io-voltage-domain
+ - rockchip,rk3368-io-voltage-domain
+ - rockchip,rk3368-pmu-io-voltage-domain
+ - rockchip,rk3399-io-voltage-domain
+ - rockchip,rk3399-pmu-io-voltage-domain
+ - rockchip,rk3568-pmu-io-voltage-domain
+ - rockchip,rv1108-io-voltage-domain
+ - rockchip,rv1108-pmu-io-voltage-domain
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: "#/$defs/px30"
+ - $ref: "#/$defs/px30-pmu"
+ - $ref: "#/$defs/rk3188"
+ - $ref: "#/$defs/rk3228"
+ - $ref: "#/$defs/rk3288"
+ - $ref: "#/$defs/rk3328"
+ - $ref: "#/$defs/rk3368"
+ - $ref: "#/$defs/rk3368-pmu"
+ - $ref: "#/$defs/rk3399"
+ - $ref: "#/$defs/rk3399-pmu"
+ - $ref: "#/$defs/rk3568-pmu"
+ - $ref: "#/$defs/rv1108"
+ - $ref: "#/$defs/rv1108-pmu"
+
+$defs:
+ px30:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+ vccio6-supply:
+ description: The supply connected to VCCIO6.
+ vccio-oscgpi-supply:
+ description: The supply connected to VCCIO_OSCGPI.
+
+ px30-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmuio1-supply:
+ description: The supply connected to PMUIO1.
+ pmuio2-supply:
+ description: The supply connected to PMUIO2.
+
+ rk3188:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3188-io-voltage-domain
+
+ then:
+ properties:
+ ap0-supply:
+ description: The supply connected to AP0_VCC.
+ ap1-supply:
+ description: The supply connected to AP1_VCC.
+ cif-supply:
+ description: The supply connected to CIF_VCC.
+ flash-supply:
+ description: The supply connected to FLASH_VCC.
+ lcdc0-supply:
+ description: The supply connected to LCD0_VCC.
+ lcdc1-supply:
+ description: The supply connected to LCD1_VCC.
+ vccio0-supply:
+ description: The supply connected to VCCIO0.
+ vccio1-supply:
+ description: The supply connected to VCCIO1. Also labeled as VCCIO2.
+
+ rk3228:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3228-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+
+ rk3288:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-io-voltage-domain
+
+ then:
+ properties:
+ audio-supply:
+ description: The supply connected to APIO4_VDD.
+ bb-supply:
+ description: The supply connected to APIO5_VDD.
+ dvp-supply:
+ description: The supply connected to DVPIO_VDD.
+ flash0-supply:
+ description: The supply connected to FLASH0_VDD. Typically for eMMC.
+ flash1-supply:
+ description: The supply connected to FLASH1_VDD. Also known as SDIO1.
+ gpio30-supply:
+ description: The supply connected to APIO1_VDD.
+ gpio1830-supply:
+ description: The supply connected to APIO2_VDD.
+ lcdc-supply:
+ description: The supply connected to LCDC_VDD.
+ sdcard-supply:
+ description: The supply connected to SDMMC0_VDD.
+ wifi-supply:
+ description: The supply connected to APIO3_VDD. Also known as SDIO0.
+
+ rk3328:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3328-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+ vccio6-supply:
+ description: The supply connected to VCCIO6.
+ pmuio-supply:
+ description: The supply connected to VCCIO_PMU.
+
+ rk3368:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3368-io-voltage-domain
+
+ then:
+ properties:
+ audio-supply:
+ description: The supply connected to APIO3_VDD.
+ dvp-supply:
+ description: The supply connected to DVPIO_VDD.
+ flash0-supply:
+ description: The supply connected to FLASH0_VDD. Typically for eMMC.
+ gpio30-supply:
+ description: The supply connected to APIO1_VDD.
+ gpio1830-supply:
+ description: The supply connected to APIO4_VDD.
+ sdcard-supply:
+ description: The supply connected to SDMMC0_VDD.
+ wifi-supply:
+ description: The supply connected to APIO2_VDD. Also known as SDIO0.
+
+ rk3368-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3368-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmu-supply:
+ description: The supply connected to PMUIO_VDD.
+ vop-supply:
+ description: The supply connected to LCDC_VDD.
+
+ rk3399:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-io-voltage-domain
+
+ then:
+ properties:
+ audio-supply:
+ description: The supply connected to APIO5_VDD.
+ bt656-supply:
+ description: The supply connected to APIO2_VDD.
+ gpio1830-supply:
+ description: The supply connected to APIO4_VDD.
+ sdmmc-supply:
+ description: The supply connected to SDMMC0_VDD.
+
+ rk3399-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmu1830-supply:
+ description: The supply connected to PMUIO2_VDD.
+
+ rk3568-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3568-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmuio1-supply:
+ description: The supply connected to PMUIO1.
+ pmuio2-supply:
+ description: The supply connected to PMUIO2.
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+ vccio6-supply:
+ description: The supply connected to VCCIO6.
+ vccio7-supply:
+ description: The supply connected to VCCIO7.
+
+ rv1108:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rv1108-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to APIO1_VDD.
+ vccio2-supply:
+ description: The supply connected to APIO2_VDD.
+ vccio3-supply:
+ description: The supply connected to APIO3_VDD.
+ vccio5-supply:
+ description: The supply connected to APIO5_VDD.
+ vccio6-supply:
+ description: The supply connected to APIO6_VDD.
+
+ rv1108-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rv1108-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmu-supply:
+ description: The supply connected to PMUIO_VDD.
+
+examples:
+ - |
+ io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ audio-supply = <&vcc18_codec>;
+ bb-supply = <&vcc33_io>;
+ dvp-supply = <&vcc_18>;
+ flash0-supply = <&vcc18_flashio>;
+ gpio1830-supply = <&vcc33_io>;
+ gpio30-supply = <&vcc33_pmuio>;
+ lcdc-supply = <&vcc33_lcd>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vcc18_wl>;
+ };
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
index e2d85a1e1d63..a054757f4d9f 100644
--- a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
@@ -21,6 +21,11 @@ properties:
- const: "qcom,sc7180-aoss-cc"
- const: "qcom,sdm845-aoss-cc"
+ - description: on SC7280 SoCs the following compatibles must be specified
+ items:
+ - const: "qcom,sc7280-aoss-cc"
+ - const: "qcom,sdm845-aoss-cc"
+
- description: on SDM845 SoCs the following compatibles must be specified
items:
- const: "qcom,sdm845-aoss-cc"
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
index d7d8cec9419f..831ea8d5d83f 100644
--- a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
@@ -21,6 +21,10 @@ properties:
- const: "qcom,sc7180-pdc-global"
- const: "qcom,sdm845-pdc-global"
+ - description: on SC7280 SoCs the following compatibles must be specified
+ items:
+ - const: "qcom,sc7280-pdc-global"
+
- description: on SDM845 SoCs the following compatibles must be specified
items:
- const: "qcom,sdm845-pdc-global"
diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
new file mode 100644
index 000000000000..b13514e6783d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rzg2l-usbphy-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L USBPHY Control
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+
+description:
+ The RZ/G2L USBPHY Control mainly controls reset and power down of the
+ USB/PHY.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
+ - const: renesas,rzg2l-usbphy-ctrl
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ '#reset-cells':
+ const: 1
+ description: |
+ The phandle's argument in the reset specifier is the PHY reset associated
+ with the USB port.
+ 0 = Port 1 Phy reset
+ 1 = Port 2 Phy reset
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - power-domains
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+ phyrst: usbphy-ctrl@11c40000 {
+ compatible = "renesas,r9a07g044-usbphy-ctrl",
+ "renesas,rzg2l-usbphy-ctrl";
+ reg = <0x11c40000 0x10000>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+ resets = <&cpg R9A07G044_USB_PRESETN>;
+ power-domains = <&cpg>;
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
new file mode 100644
index 000000000000..29e4a900cad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/socionext,uniphier-glue-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier peripheral core reset in glue layer
+
+description: |
+ Some peripheral core reset belongs to its own glue layer. Before using
+ this core reset, it is necessary to control the clocks and resets to
+ enable this layer. These clocks and resets should be described in each
+ property.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pro4-usb3-reset
+ - socionext,uniphier-pro5-usb3-reset
+ - socionext,uniphier-pxs2-usb3-reset
+ - socionext,uniphier-ld20-usb3-reset
+ - socionext,uniphier-pxs3-usb3-reset
+ - socionext,uniphier-pro4-ahci-reset
+ - socionext,uniphier-pxs2-ahci-reset
+ - socionext,uniphier-pxs3-ahci-reset
+
+ reg:
+ maxItems: 1
+
+ "#reset-cells":
+ const: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ oneOf:
+ - items: # for Pro4, Pro5
+ - const: gio
+ - const: link
+ - items: # for others
+ - const: link
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ oneOf:
+ - items: # for Pro4, Pro5
+ - const: gio
+ - const: link
+ - items: # for others
+ - const: link
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#reset-cells"
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+examples:
+ - |
+ usb-glue@65b00000 {
+ compatible = "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_rst: reset@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
deleted file mode 100644
index 88e06e5e8d23..000000000000
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-UniPhier glue reset controller
-
-
-Peripheral core reset in glue layer
------------------------------------
-
-Some peripheral core reset belongs to its own glue layer. Before using
-this core reset, it is necessary to control the clocks and resets to enable
-this layer. These clocks and resets should be described in each property.
-
-Required properties:
-- compatible: Should be
- "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3
- "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3
- "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3
- "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3
- "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3
- "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI
- "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI
- "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI
-- #reset-cells: Should be 1.
-- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for the glue layer.
- According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain
- "gio", "link" - for Pro4 and Pro5 SoCs
- "link" - for others
-- resets: A list of phandles to the reset control for the glue layer.
- According to the reset-names, appropriate resets are required.
-- reset-names: Should contain
- "gio", "link" - for Pro4 and Pro5 SoCs
- "link" - for others
-
-Example:
-
- usb-glue@65b00000 {
- compatible = "socionext,uniphier-ld20-dwc3-glue",
- "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x65b00000 0x400>;
-
- usb_rst: reset@0 {
- compatible = "socionext,uniphier-ld20-usb3-reset";
- reg = <0x0 0x4>;
- #reset-cells = <1>;
- clock-names = "link";
- clocks = <&sys_clk 14>;
- reset-names = "link";
- resets = <&sys_rst 14>;
- };
-
- regulator {
- ...
- };
-
- phy {
- ...
- };
- ...
- };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
deleted file mode 100644
index 783dc81b0f26..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-Qualcomm Always-On Subsystem side channel binding
-
-This binding describes the hardware component responsible for side channel
-requests to the always-on subsystem (AOSS), used for certain power management
-requests that is not handled by the standard RPMh interface. Each client in the
-SoC has it's own block of message RAM and IRQ for communication with the AOSS.
-The protocol used to communicate in the message RAM is known as Qualcomm
-Messaging Protocol (QMP)
-
-The AOSS side channel exposes control over a set of resources, used to control
-a set of debug related clocks and to affect the low power state of resources
-related to the secondary subsystems. These resources are exposed as a set of
-power-domains.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,sc7180-aoss-qmp"
- "qcom,sc7280-aoss-qmp"
- "qcom,sdm845-aoss-qmp"
- "qcom,sm8150-aoss-qmp"
- "qcom,sm8250-aoss-qmp"
- "qcom,sm8350-aoss-qmp"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the base address and size of the message RAM for this
- client's communication with the AOSS
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the AOSS message IRQ for this client
-
-- mboxes:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: reference to the mailbox representing the outgoing doorbell
- in APCS for this client, as described in mailbox/mailbox.txt
-
-- #clock-cells:
- Usage: optional
- Value type: <u32>
- Definition: must be 0
- The single clock represents the QDSS clock.
-
-- #power-domain-cells:
- Usage: optional
- Value type: <u32>
- Definition: must be 1
- The provided power-domains are:
- CDSP state (0), LPASS state (1), modem state (2), SLPI
- state (3), SPSS state (4) and Venus state (5).
-
-= SUBNODES
-The AOSS side channel also provides the controls for three cooling devices,
-these are expressed as subnodes of the QMP node. The name of the node is used
-to identify the resource and must therefor be "cx", "mx" or "ebi".
-
-- #cooling-cells:
- Usage: optional
- Value type: <u32>
- Definition: must be 2
-
-= EXAMPLE
-
-The following example represents the AOSS side-channel message RAM and the
-mechanism exposing the power-domains, as found in SDM845.
-
- aoss_qmp: qmp@c300000 {
- compatible = "qcom,sdm845-aoss-qmp";
- reg = <0x0c300000 0x100000>;
- interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
- mboxes = <&apss_shared 0>;
-
- #power-domain-cells = <1>;
-
- cx_cdev: cx {
- #cooling-cells = <2>;
- };
-
- mx_cdev: mx {
- #cooling-cells = <2>;
- };
- };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
new file mode 100644
index 000000000000..93e4b737ee1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,aoss-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Always-On Subsystem side channel binding
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This binding describes the hardware component responsible for side channel
+ requests to the always-on subsystem (AOSS), used for certain power management
+ requests that is not handled by the standard RPMh interface. Each client in the
+ SoC has it's own block of message RAM and IRQ for communication with the AOSS.
+ The protocol used to communicate in the message RAM is known as Qualcomm
+ Messaging Protocol (QMP)
+
+ The AOSS side channel exposes control over a set of resources, used to control
+ a set of debug related clocks and to affect the low power state of resources
+ related to the secondary subsystems. These resources are exposed as a set of
+ power-domains.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,sc7180-aoss-qmp
+ - qcom,sc7280-aoss-qmp
+ - qcom,sc8180x-aoss-qmp
+ - qcom,sdm845-aoss-qmp
+ - qcom,sm8150-aoss-qmp
+ - qcom,sm8250-aoss-qmp
+ - qcom,sm8350-aoss-qmp
+ - const: qcom,aoss-qmp
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the message RAM for this client's
+ communication with the AOSS
+
+ interrupts:
+ maxItems: 1
+ description:
+ Should specify the AOSS message IRQ for this client
+
+ mboxes:
+ maxItems: 1
+ description:
+ Reference to the mailbox representing the outgoing doorbell in APCS for
+ this client, as described in mailbox/mailbox.txt
+
+ "#clock-cells":
+ const: 0
+ description:
+ The single clock represents the QDSS clock.
+
+ "#power-domain-cells":
+ const: 1
+ description: |
+ The provided power-domains are:
+ CDSP state (0), LPASS state (1), modem state (2), SLPI
+ state (3), SPSS state (4) and Venus state (5).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - mboxes
+ - "#clock-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "^(cx|mx|ebi)$":
+ type: object
+ description:
+ The AOSS side channel also provides the controls for three cooling devices,
+ these are expressed as subnodes of the QMP node. The name of the node is
+ used to identify the resource and must therefor be "cx", "mx" or "ebi".
+
+ properties:
+ "#cooling-cells":
+ const: 2
+
+ required:
+ - "#cooling-cells"
+
+ additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ aoss_qmp: qmp@c300000 {
+ compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0x0c300000 0x100000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 0>;
+
+ #clock-cells = <0>;
+ #power-domain-cells = <1>;
+
+ cx_cdev: cx {
+ #cooling-cells = <2>;
+ };
+
+ mx_cdev: mx {
+ #cooling-cells = <2>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 4663c2bcad50..a776cd37c297 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -51,6 +51,9 @@ properties:
interconnect-names:
const: qup-core
+ iommus:
+ maxItems: 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index d511f01fcac6..cc3fe5ed7421 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -39,6 +39,7 @@ properties:
- qcom,rpm-msm8996
- qcom,rpm-msm8998
- qcom,rpm-sdm660
+ - qcom,rpm-sm6115
- qcom,rpm-sm6125
- qcom,rpm-qcs404
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 62fa72cfea34..dfebf425ca49 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -15,7 +15,6 @@ properties:
- items:
- enum:
- rockchip,rk3288-sgrf
- - rockchip,rv1108-pmugrf
- rockchip,rv1108-usbgrf
- const: syscon
- items:
@@ -41,6 +40,7 @@ properties:
- rockchip,rk3568-grf
- rockchip,rk3568-pmugrf
- rockchip,rv1108-grf
+ - rockchip,rv1108-pmugrf
- const: syscon
- const: simple-mfd
@@ -198,21 +198,28 @@ allOf:
compatible:
contains:
enum:
- - rockchip,px30-pmugrf
- rockchip,px30-grf
+ - rockchip,px30-pmugrf
+ - rockchip,rk3188-grf
- rockchip,rk3228-grf
- rockchip,rk3288-grf
- rockchip,rk3328-grf
- - rockchip,rk3368-pmugrf
- rockchip,rk3368-grf
- - rockchip,rk3399-pmugrf
+ - rockchip,rk3368-pmugrf
- rockchip,rk3399-grf
+ - rockchip,rk3399-pmugrf
+ - rockchip,rk3568-pmugrf
+ - rockchip,rv1108-grf
+ - rockchip,rv1108-pmugrf
then:
properties:
io-domains:
- description:
- Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+ type: object
+
+ $ref: "/schemas/power/rockchip-io-domain.yaml#"
+
+ unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index 9790617af1bc..9d128b9e7deb 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -68,6 +68,7 @@ properties:
- ti,k2g-pruss # for 66AK2G SoC family
- ti,am654-icssg # for K3 AM65x SoC family
- ti,j721e-icssg # for K3 J721E SoC family
+ - ti,am642-icssg # for K3 AM64x SoC family
reg:
maxItems: 1
@@ -84,6 +85,8 @@ properties:
dma-ranges:
maxItems: 1
+ dma-coherent: true
+
power-domains:
description: |
This property is as per sci-pm-domain.txt.
@@ -231,8 +234,8 @@ patternProperties:
description: |
Industrial Ethernet Peripheral to manage/generate Industrial Ethernet
functions such as time stamping. Each PRUSS has either 1 IEP (on AM335x,
- AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x & J721E SoCs ). IEP
- is used for creating PTP clocks and generating PPS signals.
+ AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x, J721E & AM64x SoCs).
+ IEP is used for creating PTP clocks and generating PPS signals.
type: object
@@ -323,17 +326,29 @@ additionalProperties: false
# - interrupt-controller
# - pru
-if:
- properties:
- compatible:
- contains:
- enum:
- - ti,k2g-pruss
- - ti,am654-icssg
- - ti,j721e-icssg
-then:
- required:
- - power-domains
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,k2g-pruss
+ - ti,am654-icssg
+ - ti,j721e-icssg
+ - ti,am642-icssg
+ then:
+ required:
+ - power-domains
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,k2g-pruss
+ then:
+ required:
+ - dma-coherent
examples:
- |
diff --git a/MAINTAINERS b/MAINTAINERS
index b1a5e77e9b10..2170528c05a7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1501,7 +1501,7 @@ M: Miquel Raynal <miquel.raynal@bootlin.com@bootlin.com>
M: Naga Sureshkumar Relli <nagasure@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-F: Documentation/devicetree/bindings/mtd/arm,pl353-smc.yaml
+F: Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
F: drivers/memory/pl353-smc.c
ARM PRIMECELL CLCD PL110 DRIVER
@@ -2023,10 +2023,12 @@ M: Krzysztof Halasa <khalasa@piap.pl>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+F: Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
F: Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
F: Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
F: Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
F: arch/arm/mach-ixp4xx/
+F: drivers/bus/intel-ixp4xx-eb.c
F: drivers/clocksource/timer-ixp4xx.c
F: drivers/crypto/ixp4xx_crypto.c
F: drivers/gpio/gpio-ixp4xx.c
@@ -18077,6 +18079,7 @@ F: drivers/regulator/scmi-regulator.c
F: drivers/reset/reset-scmi.c
F: include/linux/sc[mp]i_protocol.h
F: include/trace/events/scmi.h
+F: include/uapi/linux/virtio_scmi.h
SYSTEM RESET/SHUTDOWN DRIVERS
M: Sebastian Reichel <sre@kernel.org>
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 8d209c1b3ca7..9caba4529c71 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -177,7 +177,7 @@
clocks = <&clks IMX6Q_CLK_ECSPI5>,
<&clks IMX6Q_CLK_ECSPI5>;
clock-names = "ipg", "per";
- dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+ dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 82e01ce026ea..89c342f3a7c2 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -334,7 +334,7 @@
clocks = <&clks IMX6QDL_CLK_ECSPI1>,
<&clks IMX6QDL_CLK_ECSPI1>;
clock-names = "ipg", "per";
- dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+ dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -348,7 +348,7 @@
clocks = <&clks IMX6QDL_CLK_ECSPI2>,
<&clks IMX6QDL_CLK_ECSPI2>;
clock-names = "ipg", "per";
- dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+ dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -362,7 +362,7 @@
clocks = <&clks IMX6QDL_CLK_ECSPI3>,
<&clks IMX6QDL_CLK_ECSPI3>;
clock-names = "ipg", "per";
- dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+ dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -376,7 +376,7 @@
clocks = <&clks IMX6QDL_CLK_ECSPI4>,
<&clks IMX6QDL_CLK_ECSPI4>;
clock-names = "ipg", "per";
- dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+ dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 71c1d18aafbc..d73c7b692116 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -26,7 +26,6 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/of.h>
-#include <linux/omap-gpmc.h>
#include <trace/events/power.h>
@@ -81,8 +80,6 @@ static void omap3_core_save_context(void)
/* Save the Interrupt controller context */
omap_intc_save_context();
- /* Save the GPMC context */
- omap3_gpmc_save_context();
/* Save the system control module context, padconf already save above*/
omap3_control_save_context();
}
@@ -91,8 +88,6 @@ static void omap3_core_restore_context(void)
{
/* Restore the control module context, padconf restored by h/w */
omap3_control_restore_context();
- /* Restore the GPMC context */
- omap3_gpmc_restore_context();
/* Restore the interrupt controller context */
omap_intc_restore_context();
}
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 6452ebf68d40..b21f51b8e19e 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -403,7 +403,7 @@ static const struct platform_suspend_ops tegra_suspend_ops = {
.enter = tegra_suspend_enter,
};
-void __init tegra_init_suspend(void)
+void tegra_pm_init_suspend(void)
{
enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index 81525f5f4a44..e63f96de2825 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -25,10 +25,4 @@ void tegra30_sleep_core_init(void);
extern void (*tegra_tear_down_cpu)(void);
-#ifdef CONFIG_PM_SLEEP
-void tegra_init_suspend(void);
-#else
-static inline void tegra_init_suspend(void) {}
-#endif
-
#endif /* _MACH_TEGRA_PM_H_ */
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index c011359bcdb4..ab5008f35803 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -84,8 +84,6 @@ static void __init tegra_dt_init(void)
static void __init tegra_dt_init_late(void)
{
- tegra_init_suspend();
-
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
of_machine_is_compatible("compal,paz00"))
tegra_paz00_wifikill_init();
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 5881d64af943..99c63087c8ae 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -13,45 +13,134 @@
*/
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/libata.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/pata_ixp4xx_cf.h>
+#include <linux/regmap.h>
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.2"
+#define DRV_VERSION "1.0"
-static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
+struct ixp4xx_pata {
+ struct ata_host *host;
+ struct regmap *rmap;
+ u32 cmd_csreg;
+ void __iomem *cmd;
+ void __iomem *ctl;
+};
+
+#define IXP4XX_EXP_TIMING_STRIDE 0x04
+/* The timings for the chipselect is in bits 29..16 */
+#define IXP4XX_EXP_T1_T5_MASK GENMASK(29, 16)
+#define IXP4XX_EXP_PIO_0_8 0x0a470000
+#define IXP4XX_EXP_PIO_1_8 0x06430000
+#define IXP4XX_EXP_PIO_2_8 0x02410000
+#define IXP4XX_EXP_PIO_3_8 0x00820000
+#define IXP4XX_EXP_PIO_4_8 0x00400000
+#define IXP4XX_EXP_PIO_0_16 0x29640000
+#define IXP4XX_EXP_PIO_1_16 0x05030000
+#define IXP4XX_EXP_PIO_2_16 0x00b20000
+#define IXP4XX_EXP_PIO_3_16 0x00820000
+#define IXP4XX_EXP_PIO_4_16 0x00400000
+#define IXP4XX_EXP_BW_MASK (BIT(6)|BIT(0))
+#define IXP4XX_EXP_BYTE_RD16 BIT(6) /* Byte reads on half-word devices */
+#define IXP4XX_EXP_BYTE_EN BIT(0) /* Use 8bit data bus if set */
+
+static void ixp4xx_set_8bit_timing(struct ixp4xx_pata *ixpp, u8 pio_mode)
+{
+ switch (pio_mode) {
+ case XFER_PIO_0:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_0_8);
+ break;
+ case XFER_PIO_1:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_1_8);
+ break;
+ case XFER_PIO_2:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_2_8);
+ break;
+ case XFER_PIO_3:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_3_8);
+ break;
+ case XFER_PIO_4:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_4_8);
+ break;
+ default:
+ break;
+ }
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_BW_MASK, IXP4XX_EXP_BYTE_RD16|IXP4XX_EXP_BYTE_EN);
+}
+
+static void ixp4xx_set_16bit_timing(struct ixp4xx_pata *ixpp, u8 pio_mode)
{
- struct ata_device *dev;
-
- ata_for_each_dev(dev, link, ENABLED) {
- ata_dev_info(dev, "configured for PIO0\n");
- dev->pio_mode = XFER_PIO_0;
- dev->xfer_mode = XFER_PIO_0;
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
+ switch (pio_mode){
+ case XFER_PIO_0:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_0_16);
+ break;
+ case XFER_PIO_1:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_1_16);
+ break;
+ case XFER_PIO_2:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_2_16);
+ break;
+ case XFER_PIO_3:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_3_16);
+ break;
+ case XFER_PIO_4:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_4_16);
+ break;
+ default:
+ break;
}
- return 0;
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_BW_MASK, IXP4XX_EXP_BYTE_RD16);
+}
+
+/* This sets up the timing on the chipselect CMD accordingly */
+static void ixp4xx_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ixp4xx_pata *ixpp = ap->host->private_data;
+
+ ata_dev_printk(adev, KERN_INFO, "configured for PIO%d 8bit\n",
+ adev->pio_mode - XFER_PIO_0);
+ ixp4xx_set_8bit_timing(ixpp, adev->pio_mode);
}
+
static unsigned int ixp4xx_mmio_data_xfer(struct ata_queued_cmd *qc,
- unsigned char *buf, unsigned int buflen, int rw)
+ unsigned char *buf, unsigned int buflen, int rw)
{
unsigned int i;
unsigned int words = buflen >> 1;
u16 *buf16 = (u16 *) buf;
+ struct ata_device *adev = qc->dev;
struct ata_port *ap = qc->dev->link->ap;
void __iomem *mmio = ap->ioaddr.data_addr;
- struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
+ struct ixp4xx_pata *ixpp = ap->host->private_data;
+ unsigned long flags;
+
+ ata_dev_printk(adev, KERN_DEBUG, "%s %d bytes\n", (rw == READ) ? "READ" : "WRITE",
+ buflen);
+ spin_lock_irqsave(ap->lock, flags);
/* set the expansion bus in 16bit mode and restore
* 8 bit mode after the transaction.
*/
- *data->cs0_cfg &= ~(0x01);
- udelay(100);
+ ixp4xx_set_16bit_timing(ixpp, adev->pio_mode);
+ udelay(5);
/* Transfer multiple of 2 bytes */
if (rw == READ)
@@ -76,8 +165,10 @@ static unsigned int ixp4xx_mmio_data_xfer(struct ata_queued_cmd *qc,
words++;
}
- udelay(100);
- *data->cs0_cfg |= 0x01;
+ ixp4xx_set_8bit_timing(ixpp, adev->pio_mode);
+ udelay(5);
+
+ spin_unlock_irqrestore(ap->lock, flags);
return words << 1;
}
@@ -90,79 +181,98 @@ static struct ata_port_operations ixp4xx_port_ops = {
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ixp4xx_mmio_data_xfer,
.cable_detect = ata_cable_40wire,
- .set_mode = ixp4xx_set_mode,
+ .set_piomode = ixp4xx_set_piomode,
+};
+
+static struct ata_port_info ixp4xx_port_info = {
+ .flags = ATA_FLAG_NO_ATAPI,
+ .pio_mask = ATA_PIO4,
+ .port_ops = &ixp4xx_port_ops,
};
static void ixp4xx_setup_port(struct ata_port *ap,
- struct ixp4xx_pata_data *data,
- unsigned long raw_cs0, unsigned long raw_cs1)
+ struct ixp4xx_pata *ixpp,
+ unsigned long raw_cmd, unsigned long raw_ctl)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned long raw_cmd = raw_cs0;
- unsigned long raw_ctl = raw_cs1 + 0x06;
- ioaddr->cmd_addr = data->cs0;
- ioaddr->altstatus_addr = data->cs1 + 0x06;
- ioaddr->ctl_addr = data->cs1 + 0x06;
+ raw_ctl += 0x06;
+ ioaddr->cmd_addr = ixpp->cmd;
+ ioaddr->altstatus_addr = ixpp->ctl + 0x06;
+ ioaddr->ctl_addr = ixpp->ctl + 0x06;
ata_sff_std_ports(ioaddr);
-#ifndef __ARMEB__
-
- /* adjust the addresses to handle the address swizzling of the
- * ixp4xx in little endian mode.
- */
-
- *(unsigned long *)&ioaddr->data_addr ^= 0x02;
- *(unsigned long *)&ioaddr->cmd_addr ^= 0x03;
- *(unsigned long *)&ioaddr->altstatus_addr ^= 0x03;
- *(unsigned long *)&ioaddr->ctl_addr ^= 0x03;
- *(unsigned long *)&ioaddr->error_addr ^= 0x03;
- *(unsigned long *)&ioaddr->feature_addr ^= 0x03;
- *(unsigned long *)&ioaddr->nsect_addr ^= 0x03;
- *(unsigned long *)&ioaddr->lbal_addr ^= 0x03;
- *(unsigned long *)&ioaddr->lbam_addr ^= 0x03;
- *(unsigned long *)&ioaddr->lbah_addr ^= 0x03;
- *(unsigned long *)&ioaddr->device_addr ^= 0x03;
- *(unsigned long *)&ioaddr->status_addr ^= 0x03;
- *(unsigned long *)&ioaddr->command_addr ^= 0x03;
-
- raw_cmd ^= 0x03;
- raw_ctl ^= 0x03;
-#endif
+ if (!IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) {
+ /* adjust the addresses to handle the address swizzling of the
+ * ixp4xx in little endian mode.
+ */
+
+ *(unsigned long *)&ioaddr->data_addr ^= 0x02;
+ *(unsigned long *)&ioaddr->cmd_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->altstatus_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->ctl_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->error_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->feature_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->nsect_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->lbal_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->lbam_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->lbah_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->device_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->status_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->command_addr ^= 0x03;
+
+ raw_cmd ^= 0x03;
+ raw_ctl ^= 0x03;
+ }
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl);
}
static int ixp4xx_pata_probe(struct platform_device *pdev)
{
- struct resource *cs0, *cs1;
- struct ata_host *host;
- struct ata_port *ap;
- struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
+ struct resource *cmd, *ctl;
+ struct ata_port_info pi = ixp4xx_port_info;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct ixp4xx_pata *ixpp;
+ u32 csindex;
int ret;
int irq;
- cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ cmd = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!cs0 || !cs1)
+ if (!cmd || !ctl)
return -EINVAL;
- /* allocate host */
- host = ata_host_alloc(&pdev->dev, 1);
- if (!host)
+ ixpp = devm_kzalloc(dev, sizeof(*ixpp), GFP_KERNEL);
+ if (!ixpp)
return -ENOMEM;
- /* acquire resources and fill host */
- ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ ixpp->rmap = syscon_node_to_regmap(np->parent);
+ if (IS_ERR(ixpp->rmap))
+ return dev_err_probe(dev, PTR_ERR(ixpp->rmap), "no regmap\n");
+ /* Inspect our address to figure out what chipselect the CMD is on */
+ ret = of_property_read_u32_index(np, "reg", 0, &csindex);
if (ret)
- return ret;
+ return dev_err_probe(dev, ret, "can't inspect CMD address\n");
+ dev_info(dev, "using CS%d for PIO timing configuration\n", csindex);
+ ixpp->cmd_csreg = csindex * IXP4XX_EXP_TIMING_STRIDE;
- data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
- data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
+ ixpp->host = ata_host_alloc_pinfo(dev, ppi, 1);
+ if (!ixpp->host)
+ return -ENOMEM;
+ ixpp->host->private_data = ixpp;
- if (!data->cs0 || !data->cs1)
+ ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ ixpp->cmd = devm_ioremap_resource(dev, cmd);
+ ixpp->ctl = devm_ioremap_resource(dev, ctl);
+ if (IS_ERR(ixpp->cmd) || IS_ERR(ixpp->ctl))
return -ENOMEM;
irq = platform_get_irq(pdev, 0);
@@ -173,27 +283,23 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
else
return -EINVAL;
- /* Setup expansion bus chip selects */
- *data->cs0_cfg = data->cs0_bits;
- *data->cs1_cfg = data->cs1_bits;
-
- ap = host->ports[0];
-
- ap->ops = &ixp4xx_port_ops;
- ap->pio_mask = ATA_PIO4;
- ap->flags |= ATA_FLAG_NO_ATAPI;
+ /* Just one port to set up */
+ ixp4xx_setup_port(ixpp->host->ports[0], ixpp, cmd->start, ctl->start);
- ixp4xx_setup_port(ap, data, cs0->start, cs1->start);
+ ata_print_version_once(dev, DRV_VERSION);
- ata_print_version_once(&pdev->dev, DRV_VERSION);
-
- /* activate host */
- return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);
+ return ata_host_activate(ixpp->host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);
}
+static const struct of_device_id ixp4xx_pata_of_match[] = {
+ { .compatible = "intel,ixp4xx-compact-flash", },
+ { },
+};
+
static struct platform_driver ixp4xx_pata_platform_driver = {
.driver = {
.name = DRV_NAME,
+ .of_match_table = ixp4xx_pata_of_match,
},
.probe = ixp4xx_pata_probe,
.remove = ata_platform_remove_one,
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index e7f7eee6ee9a..a5b96f3aad67 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -95,6 +95,17 @@ config IMX_WEIM
The WEIM(Wireless External Interface Module) works like a bus.
You can attach many different devices on it, such as NOR, onenand.
+config INTEL_IXP4XX_EB
+ bool "Intel IXP4xx expansion bus interface driver"
+ depends on HAS_IOMEM
+ depends on ARCH_IXP4XX || COMPILE_TEST
+ default ARCH_IXP4XX
+ select MFD_SYSCON
+ help
+ Driver for the Intel IXP4xx expansion bus interface. The driver is
+ needed to set up various chip select configuration parameters before
+ devices on the expansion bus can be discovered.
+
config MIPS_CDMM
bool "MIPS Common Device Memory Map (CDMM) Driver"
depends on CPU_MIPSR2 || CPU_MIPSR5
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 397e35392bff..1c29c5e8ffb8 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
obj-$(CONFIG_BT1_APB) += bt1-apb.o
obj-$(CONFIG_BT1_AXI) += bt1-axi.o
obj-$(CONFIG_IMX_WEIM) += imx-weim.o
+obj-$(CONFIG_INTEL_IXP4XX_EB) += intel-ixp4xx-eb.o
obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
diff --git a/drivers/bus/intel-ixp4xx-eb.c b/drivers/bus/intel-ixp4xx-eb.c
new file mode 100644
index 000000000000..a4388440aca7
--- /dev/null
+++ b/drivers/bus/intel-ixp4xx-eb.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel IXP4xx Expansion Bus Controller
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/log2.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IXP4XX_EXP_NUM_CS 8
+
+#define IXP4XX_EXP_TIMING_CS0 0x00
+#define IXP4XX_EXP_TIMING_CS1 0x04
+#define IXP4XX_EXP_TIMING_CS2 0x08
+#define IXP4XX_EXP_TIMING_CS3 0x0c
+#define IXP4XX_EXP_TIMING_CS4 0x10
+#define IXP4XX_EXP_TIMING_CS5 0x14
+#define IXP4XX_EXP_TIMING_CS6 0x18
+#define IXP4XX_EXP_TIMING_CS7 0x1c
+
+/* Bits inside each CS timing register */
+#define IXP4XX_EXP_TIMING_STRIDE 0x04
+#define IXP4XX_EXP_CS_EN BIT(31)
+#define IXP456_EXP_PAR_EN BIT(30) /* Only on IXP45x and IXP46x */
+#define IXP4XX_EXP_T1_MASK GENMASK(28, 27)
+#define IXP4XX_EXP_T1_SHIFT 28
+#define IXP4XX_EXP_T2_MASK GENMASK(27, 26)
+#define IXP4XX_EXP_T2_SHIFT 26
+#define IXP4XX_EXP_T3_MASK GENMASK(25, 22)
+#define IXP4XX_EXP_T3_SHIFT 22
+#define IXP4XX_EXP_T4_MASK GENMASK(21, 20)
+#define IXP4XX_EXP_T4_SHIFT 20
+#define IXP4XX_EXP_T5_MASK GENMASK(19, 16)
+#define IXP4XX_EXP_T5_SHIFT 16
+#define IXP4XX_EXP_CYC_TYPE_MASK GENMASK(15, 14)
+#define IXP4XX_EXP_CYC_TYPE_SHIFT 14
+#define IXP4XX_EXP_SIZE_MASK GENMASK(13, 10)
+#define IXP4XX_EXP_SIZE_SHIFT 10
+#define IXP4XX_EXP_CNFG_0 BIT(9) /* Always zero */
+#define IXP43X_EXP_SYNC_INTEL BIT(8) /* Only on IXP43x */
+#define IXP43X_EXP_EXP_CHIP BIT(7) /* Only on IXP43x */
+#define IXP4XX_EXP_BYTE_RD16 BIT(6)
+#define IXP4XX_EXP_HRDY_POL BIT(5) /* Only on IXP42x */
+#define IXP4XX_EXP_MUX_EN BIT(4)
+#define IXP4XX_EXP_SPLT_EN BIT(3)
+#define IXP4XX_EXP_WORD BIT(2) /* Always zero */
+#define IXP4XX_EXP_WR_EN BIT(1)
+#define IXP4XX_EXP_BYTE_EN BIT(0)
+#define IXP42X_RESERVED (BIT(30)|IXP4XX_EXP_CNFG_0|BIT(8)|BIT(7)|IXP4XX_EXP_WORD)
+#define IXP43X_RESERVED (BIT(30)|IXP4XX_EXP_CNFG_0|BIT(5)|IXP4XX_EXP_WORD)
+
+#define IXP4XX_EXP_CNFG0 0x20
+#define IXP4XX_EXP_CNFG0_MEM_MAP BIT(31)
+#define IXP4XX_EXP_CNFG1 0x24
+
+#define IXP4XX_EXP_BOOT_BASE 0x00000000
+#define IXP4XX_EXP_NORMAL_BASE 0x50000000
+#define IXP4XX_EXP_STRIDE 0x01000000
+
+/* Fuses on the IXP43x */
+#define IXP43X_EXP_UNIT_FUSE_RESET 0x28
+#define IXP43x_EXP_FUSE_SPEED_MASK GENMASK(23, 22)
+
+/* Number of device tree values in "reg" */
+#define IXP4XX_OF_REG_SIZE 3
+
+struct ixp4xx_eb {
+ struct device *dev;
+ struct regmap *rmap;
+ u32 bus_base;
+ bool is_42x;
+ bool is_43x;
+};
+
+struct ixp4xx_exp_tim_prop {
+ const char *prop;
+ u32 max;
+ u32 mask;
+ u16 shift;
+};
+
+static const struct ixp4xx_exp_tim_prop ixp4xx_exp_tim_props[] = {
+ {
+ .prop = "intel,ixp4xx-eb-t1",
+ .max = 3,
+ .mask = IXP4XX_EXP_T1_MASK,
+ .shift = IXP4XX_EXP_T1_SHIFT,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-t2",
+ .max = 3,
+ .mask = IXP4XX_EXP_T2_MASK,
+ .shift = IXP4XX_EXP_T2_SHIFT,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-t3",
+ .max = 15,
+ .mask = IXP4XX_EXP_T3_MASK,
+ .shift = IXP4XX_EXP_T3_SHIFT,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-t4",
+ .max = 3,
+ .mask = IXP4XX_EXP_T4_MASK,
+ .shift = IXP4XX_EXP_T4_SHIFT,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-t5",
+ .max = 15,
+ .mask = IXP4XX_EXP_T5_MASK,
+ .shift = IXP4XX_EXP_T5_SHIFT,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-byte-access-on-halfword",
+ .max = 1,
+ .mask = IXP4XX_EXP_BYTE_RD16,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-hpi-hrdy-pol-high",
+ .max = 1,
+ .mask = IXP4XX_EXP_HRDY_POL,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-mux-address-and-data",
+ .max = 1,
+ .mask = IXP4XX_EXP_MUX_EN,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-ahb-split-transfers",
+ .max = 1,
+ .mask = IXP4XX_EXP_SPLT_EN,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-write-enable",
+ .max = 1,
+ .mask = IXP4XX_EXP_WR_EN,
+ },
+ {
+ .prop = "intel,ixp4xx-eb-byte-access",
+ .max = 1,
+ .mask = IXP4XX_EXP_BYTE_EN,
+ },
+};
+
+static void ixp4xx_exp_setup_chipselect(struct ixp4xx_eb *eb,
+ struct device_node *np,
+ u32 cs_index,
+ u32 cs_size)
+{
+ u32 cs_cfg;
+ u32 val;
+ u32 cur_cssize;
+ u32 cs_order;
+ int ret;
+ int i;
+
+ if (eb->is_42x && (cs_index > 7)) {
+ dev_err(eb->dev,
+ "invalid chipselect %u, we only support 0-7\n",
+ cs_index);
+ return;
+ }
+ if (eb->is_43x && (cs_index > 3)) {
+ dev_err(eb->dev,
+ "invalid chipselect %u, we only support 0-3\n",
+ cs_index);
+ return;
+ }
+
+ /* Several chip selects can be joined into one device */
+ if (cs_size > IXP4XX_EXP_STRIDE)
+ cur_cssize = IXP4XX_EXP_STRIDE;
+ else
+ cur_cssize = cs_size;
+
+
+ /*
+ * The following will read/modify/write the configuration for one
+ * chipselect, attempting to leave the boot defaults in place unless
+ * something is explicitly defined.
+ */
+ regmap_read(eb->rmap, IXP4XX_EXP_TIMING_CS0 +
+ IXP4XX_EXP_TIMING_STRIDE * cs_index, &cs_cfg);
+ dev_info(eb->dev, "CS%d at %#08x, size %#08x, config before: %#08x\n",
+ cs_index, eb->bus_base + IXP4XX_EXP_STRIDE * cs_index,
+ cur_cssize, cs_cfg);
+
+ /* Size set-up first align to 2^9 .. 2^24 */
+ cur_cssize = roundup_pow_of_two(cur_cssize);
+ if (cur_cssize < 512)
+ cur_cssize = 512;
+ cs_order = ilog2(cur_cssize);
+ if (cs_order < 9 || cs_order > 24) {
+ dev_err(eb->dev, "illegal size order %d\n", cs_order);
+ return;
+ }
+ dev_dbg(eb->dev, "CS%d size order: %d\n", cs_index, cs_order);
+ cs_cfg &= ~(IXP4XX_EXP_SIZE_MASK);
+ cs_cfg |= ((cs_order - 9) << IXP4XX_EXP_SIZE_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(ixp4xx_exp_tim_props); i++) {
+ const struct ixp4xx_exp_tim_prop *ip = &ixp4xx_exp_tim_props[i];
+
+ /* All are regular u32 values */
+ ret = of_property_read_u32(np, ip->prop, &val);
+ if (ret)
+ continue;
+
+ /* Handle bools (single bits) first */
+ if (ip->max == 1) {
+ if (val)
+ cs_cfg |= ip->mask;
+ else
+ cs_cfg &= ~ip->mask;
+ dev_info(eb->dev, "CS%d %s %s\n", cs_index,
+ val ? "enabled" : "disabled",
+ ip->prop);
+ continue;
+ }
+
+ if (val > ip->max) {
+ dev_err(eb->dev,
+ "CS%d too high value for %s: %u, capped at %u\n",
+ cs_index, ip->prop, val, ip->max);
+ val = ip->max;
+ }
+ /* This assumes max value fills all the assigned bits (and it does) */
+ cs_cfg &= ~ip->mask;
+ cs_cfg |= (val << ip->shift);
+ dev_info(eb->dev, "CS%d set %s to %u\n", cs_index, ip->prop, val);
+ }
+
+ ret = of_property_read_u32(np, "intel,ixp4xx-eb-cycle-type", &val);
+ if (!ret) {
+ if (val > 3) {
+ dev_err(eb->dev, "illegal cycle type %d\n", val);
+ return;
+ }
+ dev_info(eb->dev, "CS%d set cycle type %d\n", cs_index, val);
+ cs_cfg &= ~IXP4XX_EXP_CYC_TYPE_MASK;
+ cs_cfg |= val << IXP4XX_EXP_CYC_TYPE_SHIFT;
+ }
+
+ if (eb->is_42x)
+ cs_cfg &= ~IXP42X_RESERVED;
+ if (eb->is_43x) {
+ cs_cfg &= ~IXP43X_RESERVED;
+ /*
+ * This bit for Intel strata flash is currently unused, but let's
+ * report it if we find one.
+ */
+ if (cs_cfg & IXP43X_EXP_SYNC_INTEL)
+ dev_info(eb->dev, "claims to be Intel strata flash\n");
+ }
+ cs_cfg |= IXP4XX_EXP_CS_EN;
+
+ regmap_write(eb->rmap,
+ IXP4XX_EXP_TIMING_CS0 + IXP4XX_EXP_TIMING_STRIDE * cs_index,
+ cs_cfg);
+ dev_info(eb->dev, "CS%d wrote %#08x into CS config\n", cs_index, cs_cfg);
+
+ /*
+ * If several chip selects are joined together into one big
+ * device area, we call ourselves recursively for each successive
+ * chip select. For a 32MB flash chip this results in two calls
+ * for example.
+ */
+ if (cs_size > IXP4XX_EXP_STRIDE)
+ ixp4xx_exp_setup_chipselect(eb, np,
+ cs_index + 1,
+ cs_size - IXP4XX_EXP_STRIDE);
+}
+
+static void ixp4xx_exp_setup_child(struct ixp4xx_eb *eb,
+ struct device_node *np)
+{
+ u32 cs_sizes[IXP4XX_EXP_NUM_CS];
+ int num_regs;
+ u32 csindex;
+ u32 cssize;
+ int ret;
+ int i;
+
+ num_regs = of_property_count_elems_of_size(np, "reg", IXP4XX_OF_REG_SIZE);
+ if (num_regs <= 0)
+ return;
+ dev_dbg(eb->dev, "child %s has %d register sets\n",
+ of_node_full_name(np), num_regs);
+
+ for (csindex = 0; csindex < IXP4XX_EXP_NUM_CS; csindex++)
+ cs_sizes[csindex] = 0;
+
+ for (i = 0; i < num_regs; i++) {
+ u32 rbase, rsize;
+
+ ret = of_property_read_u32_index(np, "reg",
+ i * IXP4XX_OF_REG_SIZE, &csindex);
+ if (ret)
+ break;
+ ret = of_property_read_u32_index(np, "reg",
+ i * IXP4XX_OF_REG_SIZE + 1, &rbase);
+ if (ret)
+ break;
+ ret = of_property_read_u32_index(np, "reg",
+ i * IXP4XX_OF_REG_SIZE + 2, &rsize);
+ if (ret)
+ break;
+
+ if (csindex >= IXP4XX_EXP_NUM_CS) {
+ dev_err(eb->dev, "illegal CS %d\n", csindex);
+ continue;
+ }
+ /*
+ * The memory window always starts from CS base so we need to add
+ * the start and size to get to the size from the start of the CS
+ * base. For example if CS0 is at 0x50000000 and the reg is
+ * <0 0xe40000 0x40000> the size is e80000.
+ *
+ * Roof this if we have several regs setting the same CS.
+ */
+ cssize = rbase + rsize;
+ dev_dbg(eb->dev, "CS%d size %#08x\n", csindex, cssize);
+ if (cs_sizes[csindex] < cssize)
+ cs_sizes[csindex] = cssize;
+ }
+
+ for (csindex = 0; csindex < IXP4XX_EXP_NUM_CS; csindex++) {
+ cssize = cs_sizes[csindex];
+ if (!cssize)
+ continue;
+ /* Just this one, so set it up and return */
+ ixp4xx_exp_setup_chipselect(eb, np, csindex, cssize);
+ }
+}
+
+static int ixp4xx_exp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct ixp4xx_eb *eb;
+ struct device_node *child;
+ bool have_children = false;
+ u32 val;
+ int ret;
+
+ eb = devm_kzalloc(dev, sizeof(*eb), GFP_KERNEL);
+ if (!eb)
+ return -ENOMEM;
+
+ eb->dev = dev;
+ eb->is_42x = of_device_is_compatible(np, "intel,ixp42x-expansion-bus-controller");
+ eb->is_43x = of_device_is_compatible(np, "intel,ixp43x-expansion-bus-controller");
+
+ eb->rmap = syscon_node_to_regmap(np);
+ if (IS_ERR(eb->rmap))
+ return dev_err_probe(dev, PTR_ERR(eb->rmap), "no regmap\n");
+
+ /* We check that the regmap work only on first read */
+ ret = regmap_read(eb->rmap, IXP4XX_EXP_CNFG0, &val);
+ if (ret)
+ return dev_err_probe(dev, ret, "cannot read regmap\n");
+ if (val & IXP4XX_EXP_CNFG0_MEM_MAP)
+ eb->bus_base = IXP4XX_EXP_BOOT_BASE;
+ else
+ eb->bus_base = IXP4XX_EXP_NORMAL_BASE;
+ dev_info(dev, "expansion bus at %08x\n", eb->bus_base);
+
+ if (eb->is_43x) {
+ /* Check some fuses */
+ regmap_read(eb->rmap, IXP43X_EXP_UNIT_FUSE_RESET, &val);
+ switch (FIELD_GET(IXP43x_EXP_FUSE_SPEED_MASK, val)) {
+ case 0:
+ dev_info(dev, "IXP43x at 533 MHz\n");
+ break;
+ case 1:
+ dev_info(dev, "IXP43x at 400 MHz\n");
+ break;
+ case 2:
+ dev_info(dev, "IXP43x at 667 MHz\n");
+ break;
+ default:
+ dev_info(dev, "IXP43x unknown speed\n");
+ break;
+ }
+ }
+
+ /* Walk over the child nodes and see what chipselects we use */
+ for_each_available_child_of_node(np, child) {
+ ixp4xx_exp_setup_child(eb, child);
+ /* We have at least one child */
+ have_children = true;
+ }
+
+ if (have_children)
+ return of_platform_default_populate(np, NULL, dev);
+
+ return 0;
+}
+
+static const struct of_device_id ixp4xx_exp_of_match[] = {
+ { .compatible = "intel,ixp42x-expansion-bus-controller", },
+ { .compatible = "intel,ixp43x-expansion-bus-controller", },
+ { .compatible = "intel,ixp45x-expansion-bus-controller", },
+ { .compatible = "intel,ixp46x-expansion-bus-controller", },
+ { }
+};
+
+static struct platform_driver ixp4xx_exp_driver = {
+ .probe = ixp4xx_exp_probe,
+ .driver = {
+ .name = "intel-extbus",
+ .of_match_table = ixp4xx_exp_of_match,
+ },
+};
+module_platform_driver(ixp4xx_exp_driver);
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("Intel IXP4xx external bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 148a4dd8cb9a..a51c2a8feed9 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -855,7 +855,7 @@ static int sysc_check_registers(struct sysc *ddata)
}
/**
- * syc_ioremap - ioremap register space for the interconnect target module
+ * sysc_ioremap - ioremap register space for the interconnect target module
* @ddata: device driver data
*
* Note that the interconnect target module registers can be anywhere
@@ -1446,10 +1446,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_OPT_CLKS_IN_RESET),
SYSC_QUIRK("sham", 0, 0x100, 0x110, 0x114, 0x40000c03, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
- SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x24, -ENODEV, 0x00000000, 0xffffffff,
- SYSC_QUIRK_LEGACY_IDLE),
- SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x38, -ENODEV, 0x00000000, 0xffffffff,
- SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
@@ -1501,6 +1497,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_MODULE_QUIRK_SGX),
SYSC_QUIRK("lcdc", 0, 0, 0x54, -ENODEV, 0x4f201000, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
+ SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44306302, 0xffffffff,
+ SYSC_QUIRK_SWSUP_SIDLE),
SYSC_QUIRK("rtc", 0, 0x74, 0x78, -ENODEV, 0x4eb01908, 0xffff00f0,
SYSC_MODULE_QUIRK_RTC_UNLOCK),
SYSC_QUIRK("tptc", 0, 0, 0x10, -ENODEV, 0x40006c00, 0xffffefff,
@@ -1557,7 +1555,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0),
SYSC_QUIRK("iss", 0, 0, 0x10, -ENODEV, 0x40000101, 0xffffffff, 0),
SYSC_QUIRK("keypad", 0x4a31c000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, 0),
- SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44306302, 0xffffffff, 0),
SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44307b02, 0xffffffff, 0),
SYSC_QUIRK("mcbsp", 0, -ENODEV, 0x8c, -ENODEV, 0, 0, 0),
SYSC_QUIRK("mcspi", 0, 0, 0x10, -ENODEV, 0x40300a0b, 0xffff00ff, 0),
@@ -1585,6 +1582,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("sdma", 0, 0, 0x2c, 0x28, 0x00010900, 0xffffffff, 0),
SYSC_QUIRK("slimbus", 0, 0, 0x10, -ENODEV, 0x40000902, 0xffffffff, 0),
SYSC_QUIRK("slimbus", 0, 0, 0x10, -ENODEV, 0x40002903, 0xffffffff, 0),
+ SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x24, -ENODEV, 0x00000000, 0xffffffff, 0),
+ SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x38, -ENODEV, 0x00000000, 0xffffffff, 0),
SYSC_QUIRK("spinlock", 0, 0, 0x10, -ENODEV, 0x50020000, 0xffffffff, 0),
SYSC_QUIRK("rng", 0, 0x1fe0, 0x1fe4, -ENODEV, 0x00000020, 0xffffffff, 0),
SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000013, 0xffffffff, 0),
@@ -3115,9 +3114,8 @@ static int sysc_probe(struct platform_device *pdev)
goto unprepare;
pm_runtime_enable(ddata->dev);
- error = pm_runtime_get_sync(ddata->dev);
+ error = pm_runtime_resume_and_get(ddata->dev);
if (error < 0) {
- pm_runtime_put_noidle(ddata->dev);
pm_runtime_disable(ddata->dev);
goto unprepare;
}
@@ -3175,9 +3173,8 @@ static int sysc_remove(struct platform_device *pdev)
cancel_delayed_work_sync(&ddata->idle_work);
- error = pm_runtime_get_sync(ddata->dev);
+ error = pm_runtime_resume_and_get(ddata->dev);
if (error < 0) {
- pm_runtime_put_noidle(ddata->dev);
pm_runtime_disable(ddata->dev);
goto unprepare;
}
diff --git a/drivers/clocksource/timer-ixp4xx.c b/drivers/clocksource/timer-ixp4xx.c
index 9396745e1c17..cbb184953510 100644
--- a/drivers/clocksource/timer-ixp4xx.c
+++ b/drivers/clocksource/timer-ixp4xx.c
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/platform_device.h>
/* Goes away with OF conversion */
#include <linux/platform_data/timer-ixp4xx.h>
@@ -29,9 +30,6 @@
#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */
#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */
/*
@@ -45,17 +43,10 @@
#define IXP4XX_OSST_TIMER_1_PEND 0x00000001
#define IXP4XX_OSST_TIMER_2_PEND 0x00000002
#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010
-
-#define IXP4XX_WDT_KEY 0x0000482E
-#define IXP4XX_WDT_RESET_ENABLE 0x00000001
-#define IXP4XX_WDT_IRQ_ENABLE 0x00000002
-#define IXP4XX_WDT_COUNT_ENABLE 0x00000004
+/* Remaining registers are for the watchdog and defined in the watchdog driver */
struct ixp4xx_timer {
void __iomem *base;
- unsigned int tick_rate;
u32 latch;
struct clock_event_device clkevt;
#ifdef CONFIG_ARM
@@ -181,7 +172,6 @@ static __init int ixp4xx_timer_register(void __iomem *base,
if (!tmr)
return -ENOMEM;
tmr->base = base;
- tmr->tick_rate = timer_freq;
/*
* The timer register doesn't allow to specify the two least
@@ -239,6 +229,40 @@ static __init int ixp4xx_timer_register(void __iomem *base,
return 0;
}
+static struct platform_device ixp4xx_watchdog_device = {
+ .name = "ixp4xx-watchdog",
+ .id = -1,
+};
+
+/*
+ * This probe gets called after the timer is already up and running. The main
+ * function on this platform is to spawn the watchdog device as a child.
+ */
+static int ixp4xx_timer_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ /* Pass the base address as platform data and nothing else */
+ ixp4xx_watchdog_device.dev.platform_data = local_ixp4xx_timer->base;
+ ixp4xx_watchdog_device.dev.parent = dev;
+ return platform_device_register(&ixp4xx_watchdog_device);
+}
+
+static const struct of_device_id ixp4xx_timer_dt_id[] = {
+ { .compatible = "intel,ixp4xx-timer", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver ixp4xx_timer_driver = {
+ .probe = ixp4xx_timer_probe,
+ .driver = {
+ .name = "ixp4xx-timer",
+ .of_match_table = ixp4xx_timer_dt_id,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(ixp4xx_timer_driver);
+
/**
* ixp4xx_timer_setup() - Timer setup function to be called from boardfiles
* @timerbase: physical base of timer block
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 8070fd664bfc..cacc725ca545 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -198,12 +198,12 @@ struct sdma_script_start_addrs {
s32 per_2_firi_addr;
s32 mcu_2_firi_addr;
s32 uart_2_per_addr;
- s32 uart_2_mcu_addr;
+ s32 uart_2_mcu_ram_addr;
s32 per_2_app_addr;
s32 mcu_2_app_addr;
s32 per_2_per_addr;
s32 uartsh_2_per_addr;
- s32 uartsh_2_mcu_addr;
+ s32 uartsh_2_mcu_ram_addr;
s32 per_2_shp_addr;
s32 mcu_2_shp_addr;
s32 ata_2_mcu_addr;
@@ -230,6 +230,10 @@ struct sdma_script_start_addrs {
s32 zcanfd_2_mcu_addr;
s32 zqspi_2_mcu_addr;
s32 mcu_2_ecspi_addr;
+ s32 mcu_2_sai_addr;
+ s32 sai_2_mcu_addr;
+ s32 uart_2_mcu_addr;
+ s32 uartsh_2_mcu_addr;
/* End of v3 array */
s32 mcu_2_zqspi_addr;
/* End of v4 array */
@@ -433,9 +437,10 @@ struct sdma_channel {
unsigned long watermark_level;
u32 shp_addr, per_addr;
enum dma_status status;
- bool context_loaded;
struct imx_dma_data data;
struct work_struct terminate_worker;
+ struct list_head terminated;
+ bool is_ram_script;
};
#define IMX_DMA_SG_LOOP BIT(0)
@@ -476,6 +481,13 @@ struct sdma_driver_data {
int num_events;
struct sdma_script_start_addrs *script_addrs;
bool check_ratio;
+ /*
+ * ecspi ERR009165 fixed should be done in sdma script
+ * and it has been fixed in soc from i.mx6ul.
+ * please get more information from the below link:
+ * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+ */
+ bool ecspi_fixed;
};
struct sdma_engine {
@@ -499,6 +511,7 @@ struct sdma_engine {
struct sdma_buffer_descriptor *bd0;
/* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/
bool clk_ratio;
+ bool fw_loaded;
};
static int sdma_config_write(struct dma_chan *chan,
@@ -595,6 +608,13 @@ static struct sdma_driver_data sdma_imx6q = {
.script_addrs = &sdma_script_imx6q,
};
+static struct sdma_driver_data sdma_imx6ul = {
+ .chnenbl0 = SDMA_CHNENBL0_IMX35,
+ .num_events = 48,
+ .script_addrs = &sdma_script_imx6q,
+ .ecspi_fixed = true,
+};
+
static struct sdma_script_start_addrs sdma_script_imx7d = {
.ap_2_ap_addr = 644,
.uart_2_mcu_addr = 819,
@@ -628,6 +648,7 @@ static const struct of_device_id sdma_dt_ids[] = {
{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+ { .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
{ /* sentinel */ }
};
@@ -919,6 +940,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
sdmac->pc_to_device = 0;
sdmac->device_to_device = 0;
sdmac->pc_to_pc = 0;
+ sdmac->is_ram_script = false;
switch (peripheral_type) {
case IMX_DMATYPE_MEMORY:
@@ -945,6 +967,17 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
break;
case IMX_DMATYPE_CSPI:
+ per_2_emi = sdma->script_addrs->app_2_mcu_addr;
+
+ /* Use rom script mcu_2_app if ERR009165 fixed */
+ if (sdmac->sdma->drvdata->ecspi_fixed) {
+ emi_2_per = sdma->script_addrs->mcu_2_app_addr;
+ } else {
+ emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+ sdmac->is_ram_script = true;
+ }
+
+ break;
case IMX_DMATYPE_EXT:
case IMX_DMATYPE_SSI:
case IMX_DMATYPE_SAI:
@@ -954,6 +987,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
case IMX_DMATYPE_SSI_DUAL:
per_2_emi = sdma->script_addrs->ssish_2_mcu_addr;
emi_2_per = sdma->script_addrs->mcu_2_ssish_addr;
+ sdmac->is_ram_script = true;
break;
case IMX_DMATYPE_SSI_SP:
case IMX_DMATYPE_MMC:
@@ -968,6 +1002,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
per_2_emi = sdma->script_addrs->asrc_2_mcu_addr;
emi_2_per = sdma->script_addrs->asrc_2_mcu_addr;
per_2_per = sdma->script_addrs->per_2_per_addr;
+ sdmac->is_ram_script = true;
break;
case IMX_DMATYPE_ASRC_SP:
per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
@@ -1008,9 +1043,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
int ret;
unsigned long flags;
- if (sdmac->context_loaded)
- return 0;
-
if (sdmac->direction == DMA_DEV_TO_MEM)
load_address = sdmac->pc_from_device;
else if (sdmac->direction == DMA_DEV_TO_DEV)
@@ -1053,8 +1085,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
- sdmac->context_loaded = true;
-
return ret;
}
@@ -1078,9 +1108,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
{
struct sdma_channel *sdmac = container_of(work, struct sdma_channel,
terminate_worker);
- unsigned long flags;
- LIST_HEAD(head);
-
/*
* According to NXP R&D team a delay of one BD SDMA cost time
* (maximum is 1ms) should be added after disable of the channel
@@ -1089,11 +1116,7 @@ static void sdma_channel_terminate_work(struct work_struct *work)
*/
usleep_range(1000, 2000);
- spin_lock_irqsave(&sdmac->vc.lock, flags);
- vchan_get_all_descriptors(&sdmac->vc, &head);
- spin_unlock_irqrestore(&sdmac->vc.lock, flags);
- vchan_dma_desc_free_list(&sdmac->vc, &head);
- sdmac->context_loaded = false;
+ vchan_dma_desc_free_list(&sdmac->vc, &sdmac->terminated);
}
static int sdma_terminate_all(struct dma_chan *chan)
@@ -1107,6 +1130,13 @@ static int sdma_terminate_all(struct dma_chan *chan)
if (sdmac->desc) {
vchan_terminate_vdesc(&sdmac->desc->vd);
+ /*
+ * move out current descriptor into terminated list so that
+ * it could be free in sdma_channel_terminate_work alone
+ * later without potential involving next descriptor raised
+ * up before the last descriptor terminated.
+ */
+ vchan_get_all_descriptors(&sdmac->vc, &sdmac->terminated);
sdmac->desc = NULL;
schedule_work(&sdmac->terminate_worker);
}
@@ -1168,7 +1198,6 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
static int sdma_config_channel(struct dma_chan *chan)
{
struct sdma_channel *sdmac = to_sdma_chan(chan);
- int ret;
sdma_disable_channel(chan);
@@ -1208,9 +1237,7 @@ static int sdma_config_channel(struct dma_chan *chan)
sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
}
- ret = sdma_load_context(sdmac);
-
- return ret;
+ return 0;
}
static int sdma_set_channel_priority(struct sdma_channel *sdmac,
@@ -1361,7 +1388,6 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
sdmac->event_id0 = 0;
sdmac->event_id1 = 0;
- sdmac->context_loaded = false;
sdma_set_channel_priority(sdmac, 0);
@@ -1374,6 +1400,11 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
{
struct sdma_desc *desc;
+ if (!sdmac->sdma->fw_loaded && sdmac->is_ram_script) {
+ dev_warn_once(sdmac->sdma->dev, "sdma firmware not ready!\n");
+ goto err_out;
+ }
+
desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
if (!desc)
goto err_out;
@@ -1722,8 +1753,8 @@ static void sdma_issue_pending(struct dma_chan *chan)
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 41
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 42
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 45
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 46
static void sdma_add_scripts(struct sdma_engine *sdma,
const struct sdma_script_start_addrs *addr)
@@ -1747,6 +1778,19 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
for (i = 0; i < sdma->script_number; i++)
if (addr_arr[i] > 0)
saddr_arr[i] = addr_arr[i];
+
+ /*
+ * get uart_2_mcu_addr/uartsh_2_mcu_addr rom script specially because
+ * they are now replaced by uart_2_mcu_ram_addr/uartsh_2_mcu_ram_addr
+ * to be compatible with legacy freescale/nxp sdma firmware, and they
+ * are located in the bottom part of sdma_script_start_addrs which are
+ * beyond the SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1.
+ */
+ if (addr->uart_2_mcu_addr)
+ sdma->script_addrs->uart_2_mcu_addr = addr->uart_2_mcu_addr;
+ if (addr->uartsh_2_mcu_addr)
+ sdma->script_addrs->uartsh_2_mcu_addr = addr->uartsh_2_mcu_addr;
+
}
static void sdma_load_firmware(const struct firmware *fw, void *context)
@@ -1803,6 +1847,8 @@ static void sdma_load_firmware(const struct firmware *fw, void *context)
sdma_add_scripts(sdma, addr);
+ sdma->fw_loaded = true;
+
dev_info(sdma->dev, "loaded firmware %d.%d\n",
header->version_major,
header->version_minor);
@@ -2086,6 +2132,7 @@ static int sdma_probe(struct platform_device *pdev)
sdmac->channel = i;
sdmac->vc.desc_free = sdma_desc_free;
+ INIT_LIST_HEAD(&sdmac->terminated);
INIT_WORK(&sdmac->terminate_worker,
sdma_channel_terminate_work);
/*
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 5d3fd803d2bb..220a58cf0a44 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -6,39 +6,7 @@
menu "Firmware Drivers"
-config ARM_SCMI_PROTOCOL
- tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
- depends on ARM || ARM64 || COMPILE_TEST
- depends on MAILBOX || HAVE_ARM_SMCCC_DISCOVERY
- help
- ARM System Control and Management Interface (SCMI) protocol is a
- set of operating system-independent software interfaces that are
- used in system management. SCMI is extensible and currently provides
- interfaces for: Discovery and self-description of the interfaces
- it supports, Power domain management which is the ability to place
- a given device or domain into the various power-saving states that
- it supports, Performance management which is the ability to control
- the performance of a domain that is composed of compute engines
- such as application processors and other accelerators, Clock
- management which is the ability to set and inquire rates on platform
- managed clocks and Sensor management which is the ability to read
- sensor data, and be notified of sensor value.
-
- This protocol library provides interface for all the client drivers
- making use of the features offered by the SCMI.
-
-config ARM_SCMI_POWER_DOMAIN
- tristate "SCMI power domain driver"
- depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
- default y
- select PM_GENERIC_DOMAINS if PM
- help
- This enables support for the SCMI power domains which can be
- enabled or disabled via the SCP firmware
-
- This driver can also be built as a module. If so, the module
- will be called scmi_pm_domain. Note this may needed early in boot
- before rootfs may be available.
+source "drivers/firmware/arm_scmi/Kconfig"
config ARM_SCPI_PROTOCOL
tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
@@ -235,7 +203,7 @@ config INTEL_STRATIX10_RSU
Say Y here if you want Intel RSU support.
config QCOM_SCM
- bool
+ tristate "Qcom SCM driver"
depends on ARM || ARM64
depends on HAVE_ARM_SMCCC
select RESET_CONTROLLER
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 705fabe88156..5ced0673d94b 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -17,7 +17,8 @@ obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
-obj-$(CONFIG_QCOM_SCM) += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+obj-$(CONFIG_QCOM_SCM) += qcom-scm.o
+qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
obj-$(CONFIG_SYSFB) += sysfb.o
obj-$(CONFIG_SYSFB_SIMPLEFB) += sysfb_simplefb.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig
new file mode 100644
index 000000000000..7f4d2435503b
--- /dev/null
+++ b/drivers/firmware/arm_scmi/Kconfig
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "ARM System Control and Management Interface Protocol"
+
+config ARM_SCMI_PROTOCOL
+ tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
+ depends on ARM || ARM64 || COMPILE_TEST
+ help
+ ARM System Control and Management Interface (SCMI) protocol is a
+ set of operating system-independent software interfaces that are
+ used in system management. SCMI is extensible and currently provides
+ interfaces for: Discovery and self-description of the interfaces
+ it supports, Power domain management which is the ability to place
+ a given device or domain into the various power-saving states that
+ it supports, Performance management which is the ability to control
+ the performance of a domain that is composed of compute engines
+ such as application processors and other accelerators, Clock
+ management which is the ability to set and inquire rates on platform
+ managed clocks and Sensor management which is the ability to read
+ sensor data, and be notified of sensor value.
+
+ This protocol library provides interface for all the client drivers
+ making use of the features offered by the SCMI.
+
+if ARM_SCMI_PROTOCOL
+
+config ARM_SCMI_HAVE_TRANSPORT
+ bool
+ help
+ This declares whether at least one SCMI transport has been configured.
+ Used to trigger a build bug when trying to build SCMI without any
+ configured transport.
+
+config ARM_SCMI_HAVE_SHMEM
+ bool
+ help
+ This declares whether a shared memory based transport for SCMI is
+ available.
+
+config ARM_SCMI_HAVE_MSG
+ bool
+ help
+ This declares whether a message passing based transport for SCMI is
+ available.
+
+config ARM_SCMI_TRANSPORT_MAILBOX
+ bool "SCMI transport based on Mailbox"
+ depends on MAILBOX
+ select ARM_SCMI_HAVE_TRANSPORT
+ select ARM_SCMI_HAVE_SHMEM
+ default y
+ help
+ Enable mailbox based transport for SCMI.
+
+ If you want the ARM SCMI PROTOCOL stack to include support for a
+ transport based on mailboxes, answer Y.
+
+config ARM_SCMI_TRANSPORT_SMC
+ bool "SCMI transport based on SMC"
+ depends on HAVE_ARM_SMCCC_DISCOVERY
+ select ARM_SCMI_HAVE_TRANSPORT
+ select ARM_SCMI_HAVE_SHMEM
+ default y
+ help
+ Enable SMC based transport for SCMI.
+
+ If you want the ARM SCMI PROTOCOL stack to include support for a
+ transport based on SMC, answer Y.
+
+config ARM_SCMI_TRANSPORT_VIRTIO
+ bool "SCMI transport based on VirtIO"
+ depends on VIRTIO
+ select ARM_SCMI_HAVE_TRANSPORT
+ select ARM_SCMI_HAVE_MSG
+ help
+ This enables the virtio based transport for SCMI.
+
+ If you want the ARM SCMI PROTOCOL stack to include support for a
+ transport based on VirtIO, answer Y.
+
+endif #ARM_SCMI_PROTOCOL
+
+config ARM_SCMI_POWER_DOMAIN
+ tristate "SCMI power domain driver"
+ depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
+ default y
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the SCMI power domains which can be
+ enabled or disabled via the SCP firmware
+
+ This driver can also be built as a module. If so, the module
+ will be called scmi_pm_domain. Note this may needed early in boot
+ before rootfs may be available.
+
+endmenu
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 6a2ef63306d6..1dcf123d64ab 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -1,9 +1,11 @@
# SPDX-License-Identifier: GPL-2.0-only
scmi-bus-y = bus.o
scmi-driver-y = driver.o notify.o
-scmi-transport-y = shmem.o
-scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
-scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o
+scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
+scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) += mailbox.o
+scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) += smc.o
+scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
+scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o
scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o
scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
$(scmi-transport-y)
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 8685619d38f9..dea1bfbe1052 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -14,8 +14,12 @@
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/hashtable.h>
+#include <linux/list.h>
#include <linux/module.h>
+#include <linux/refcount.h>
#include <linux/scmi_protocol.h>
+#include <linux/spinlock.h>
#include <linux/types.h>
#include <asm/unaligned.h>
@@ -65,11 +69,22 @@ struct scmi_msg_resp_prot_version {
#define MSG_XTRACT_TOKEN(hdr) FIELD_GET(MSG_TOKEN_ID_MASK, (hdr))
#define MSG_TOKEN_MAX (MSG_XTRACT_TOKEN(MSG_TOKEN_ID_MASK) + 1)
+/*
+ * Size of @pending_xfers hashtable included in @scmi_xfers_info; ideally, in
+ * order to minimize space and collisions, this should equal max_msg, i.e. the
+ * maximum number of in-flight messages on a specific platform, but such value
+ * is only available at runtime while kernel hashtables are statically sized:
+ * pick instead as a fixed static size the maximum number of entries that can
+ * fit the whole table into one 4k page.
+ */
+#define SCMI_PENDING_XFERS_HT_ORDER_SZ 9
+
/**
* struct scmi_msg_hdr - Message(Tx/Rx) header
*
* @id: The identifier of the message being sent
* @protocol_id: The identifier of the protocol used to send @id message
+ * @type: The SCMI type for this message
* @seq: The token to identify the message. When a message returns, the
* platform returns the whole message header unmodified including the
* token
@@ -80,6 +95,7 @@ struct scmi_msg_resp_prot_version {
struct scmi_msg_hdr {
u8 id;
u8 protocol_id;
+ u8 type;
u16 seq;
u32 status;
bool poll_completion;
@@ -89,13 +105,14 @@ struct scmi_msg_hdr {
* pack_scmi_header() - packs and returns 32-bit header
*
* @hdr: pointer to header containing all the information on message id,
- * protocol id and sequence id.
+ * protocol id, sequence id and type.
*
* Return: 32-bit packed message header to be sent to the platform.
*/
static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
{
return FIELD_PREP(MSG_ID_MASK, hdr->id) |
+ FIELD_PREP(MSG_TYPE_MASK, hdr->type) |
FIELD_PREP(MSG_TOKEN_ID_MASK, hdr->seq) |
FIELD_PREP(MSG_PROTOCOL_ID_MASK, hdr->protocol_id);
}
@@ -110,6 +127,7 @@ static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
{
hdr->id = MSG_XTRACT_ID(msg_hdr);
hdr->protocol_id = MSG_XTRACT_PROT_ID(msg_hdr);
+ hdr->type = MSG_XTRACT_TYPE(msg_hdr);
}
/**
@@ -134,6 +152,27 @@ struct scmi_msg {
* buffer for the rx path as we use for the tx path.
* @done: command message transmit completion event
* @async_done: pointer to delayed response message received event completion
+ * @pending: True for xfers added to @pending_xfers hashtable
+ * @node: An hlist_node reference used to store this xfer, alternatively, on
+ * the free list @free_xfers or in the @pending_xfers hashtable
+ * @users: A refcount to track the active users for this xfer.
+ * This is meant to protect against the possibility that, when a command
+ * transaction times out concurrently with the reception of a valid
+ * response message, the xfer could be finally put on the TX path, and
+ * so vanish, while on the RX path scmi_rx_callback() is still
+ * processing it: in such a case this refcounting will ensure that, even
+ * though the timed-out transaction will anyway cause the command
+ * request to be reported as failed by time-out, the underlying xfer
+ * cannot be discarded and possibly reused until the last one user on
+ * the RX path has released it.
+ * @busy: An atomic flag to ensure exclusive write access to this xfer
+ * @state: The current state of this transfer, with states transitions deemed
+ * valid being:
+ * - SCMI_XFER_SENT_OK -> SCMI_XFER_RESP_OK [ -> SCMI_XFER_DRESP_OK ]
+ * - SCMI_XFER_SENT_OK -> SCMI_XFER_DRESP_OK
+ * (Missing synchronous response is assumed OK and ignored)
+ * @lock: A spinlock to protect state and busy fields.
+ * @priv: A pointer for transport private usage.
*/
struct scmi_xfer {
int transfer_id;
@@ -142,8 +181,36 @@ struct scmi_xfer {
struct scmi_msg rx;
struct completion done;
struct completion *async_done;
+ bool pending;
+ struct hlist_node node;
+ refcount_t users;
+#define SCMI_XFER_FREE 0
+#define SCMI_XFER_BUSY 1
+ atomic_t busy;
+#define SCMI_XFER_SENT_OK 0
+#define SCMI_XFER_RESP_OK 1
+#define SCMI_XFER_DRESP_OK 2
+ int state;
+ /* A lock to protect state and busy fields */
+ spinlock_t lock;
+ void *priv;
};
+/*
+ * An helper macro to lookup an xfer from the @pending_xfers hashtable
+ * using the message sequence number token as a key.
+ */
+#define XFER_FIND(__ht, __k) \
+({ \
+ typeof(__k) k_ = __k; \
+ struct scmi_xfer *xfer_ = NULL; \
+ \
+ hash_for_each_possible((__ht), xfer_, node, k_) \
+ if (xfer_->hdr.seq == k_) \
+ break; \
+ xfer_; \
+})
+
struct scmi_xfer_ops;
/**
@@ -283,9 +350,13 @@ struct scmi_chan_info {
/**
* struct scmi_transport_ops - Structure representing a SCMI transport ops
*
+ * @link_supplier: Optional callback to add link to a supplier device
* @chan_available: Callback to check if channel is available or not
* @chan_setup: Callback to allocate and setup a channel
* @chan_free: Callback to free a channel
+ * @get_max_msg: Optional callback to provide max_msg dynamically
+ * Returns the maximum number of messages for the channel type
+ * (tx or rx) that can be pending simultaneously in the system
* @send_message: Callback to send a message
* @mark_txdone: Callback to mark tx as done
* @fetch_response: Callback to fetch response
@@ -294,10 +365,12 @@ struct scmi_chan_info {
* @poll_done: Callback to poll transfer status
*/
struct scmi_transport_ops {
+ int (*link_supplier)(struct device *dev);
bool (*chan_available)(struct device *dev, int idx);
int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev,
bool tx);
int (*chan_free)(int id, void *p, void *data);
+ unsigned int (*get_max_msg)(struct scmi_chan_info *base_cinfo);
int (*send_message)(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer);
void (*mark_txdone)(struct scmi_chan_info *cinfo, int ret);
@@ -317,25 +390,39 @@ struct scmi_device *scmi_child_dev_find(struct device *parent,
/**
* struct scmi_desc - Description of SoC integration
*
+ * @transport_init: An optional function that a transport can provide to
+ * initialize some transport-specific setup during SCMI core
+ * initialization, so ahead of SCMI core probing.
+ * @transport_exit: An optional function that a transport can provide to
+ * de-initialize some transport-specific setup during SCMI core
+ * de-initialization, so after SCMI core removal.
* @ops: Pointer to the transport specific ops structure
* @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
- * @max_msg: Maximum number of messages that can be pending
- * simultaneously in the system
+ * @max_msg: Maximum number of messages for a channel type (tx or rx) that can
+ * be pending simultaneously in the system. May be overridden by the
+ * get_max_msg op.
* @max_msg_size: Maximum size of data per message that can be handled.
*/
struct scmi_desc {
+ int (*transport_init)(void);
+ void (*transport_exit)(void);
const struct scmi_transport_ops *ops;
int max_rx_timeout_ms;
int max_msg;
int max_msg_size;
};
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_MAILBOX
extern const struct scmi_desc scmi_mailbox_desc;
-#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
+#endif
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC
extern const struct scmi_desc scmi_smc_desc;
#endif
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
+extern const struct scmi_desc scmi_virtio_desc;
+#endif
-void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr);
+void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv);
void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
/* shmem related declarations */
@@ -352,8 +439,22 @@ void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem);
bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
struct scmi_xfer *xfer);
+/* declarations for message passing transports */
+struct scmi_msg_payld;
+
+/* Maximum overhead of message w.r.t. struct scmi_desc.max_msg_size */
+#define SCMI_MSG_MAX_PROT_OVERHEAD (2 * sizeof(__le32))
+
+size_t msg_response_size(struct scmi_xfer *xfer);
+size_t msg_command_size(struct scmi_xfer *xfer);
+void msg_tx_prepare(struct scmi_msg_payld *msg, struct scmi_xfer *xfer);
+u32 msg_read_header(struct scmi_msg_payld *msg);
+void msg_fetch_response(struct scmi_msg_payld *msg, size_t len,
+ struct scmi_xfer *xfer);
+void msg_fetch_notification(struct scmi_msg_payld *msg, size_t len,
+ size_t max_len, struct scmi_xfer *xfer);
+
void scmi_notification_instance_data_set(const struct scmi_handle *handle,
void *priv);
void *scmi_notification_instance_data_get(const struct scmi_handle *handle);
-
#endif /* _SCMI_COMMON_H */
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 9b2e8d42a992..b406b3f78f46 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/ktime.h>
+#include <linux/hashtable.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -67,16 +68,23 @@ struct scmi_requested_dev {
/**
* struct scmi_xfers_info - Structure to manage transfer information
*
- * @xfer_block: Preallocated Message array
* @xfer_alloc_table: Bitmap table for allocated messages.
* Index of this bitmap table is also used for message
* sequence identifier.
* @xfer_lock: Protection for message allocation
+ * @max_msg: Maximum number of messages that can be pending
+ * @free_xfers: A free list for available to use xfers. It is initialized with
+ * a number of xfers equal to the maximum allowed in-flight
+ * messages.
+ * @pending_xfers: An hashtable, indexed by msg_hdr.seq, used to keep all the
+ * currently in-flight messages.
*/
struct scmi_xfers_info {
- struct scmi_xfer *xfer_block;
unsigned long *xfer_alloc_table;
spinlock_t xfer_lock;
+ int max_msg;
+ struct hlist_head free_xfers;
+ DECLARE_HASHTABLE(pending_xfers, SCMI_PENDING_XFERS_HT_ORDER_SZ);
};
/**
@@ -172,19 +180,6 @@ static inline int scmi_to_linux_errno(int errno)
return -EIO;
}
-/**
- * scmi_dump_header_dbg() - Helper to dump a message header.
- *
- * @dev: Device pointer corresponding to the SCMI entity
- * @hdr: pointer to header.
- */
-static inline void scmi_dump_header_dbg(struct device *dev,
- struct scmi_msg_hdr *hdr)
-{
- dev_dbg(dev, "Message ID: %x Sequence ID: %x Protocol: %x\n",
- hdr->id, hdr->seq, hdr->protocol_id);
-}
-
void scmi_notification_instance_data_set(const struct scmi_handle *handle,
void *priv)
{
@@ -205,45 +200,189 @@ void *scmi_notification_instance_data_get(const struct scmi_handle *handle)
}
/**
+ * scmi_xfer_token_set - Reserve and set new token for the xfer at hand
+ *
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @xfer: The xfer to act upon
+ *
+ * Pick the next unused monotonically increasing token and set it into
+ * xfer->hdr.seq: picking a monotonically increasing value avoids immediate
+ * reuse of freshly completed or timed-out xfers, thus mitigating the risk
+ * of incorrect association of a late and expired xfer with a live in-flight
+ * transaction, both happening to re-use the same token identifier.
+ *
+ * Since platform is NOT required to answer our request in-order we should
+ * account for a few rare but possible scenarios:
+ *
+ * - exactly 'next_token' may be NOT available so pick xfer_id >= next_token
+ * using find_next_zero_bit() starting from candidate next_token bit
+ *
+ * - all tokens ahead upto (MSG_TOKEN_ID_MASK - 1) are used in-flight but we
+ * are plenty of free tokens at start, so try a second pass using
+ * find_next_zero_bit() and starting from 0.
+ *
+ * X = used in-flight
+ *
+ * Normal
+ * ------
+ *
+ * |- xfer_id picked
+ * -----------+----------------------------------------------------------
+ * | | |X|X|X| | | | | | ... ... ... ... ... ... ... ... ... ... ...|X|X|
+ * ----------------------------------------------------------------------
+ * ^
+ * |- next_token
+ *
+ * Out-of-order pending at start
+ * -----------------------------
+ *
+ * |- xfer_id picked, last_token fixed
+ * -----+----------------------------------------------------------------
+ * |X|X| | | | |X|X| ... ... ... ... ... ... ... ... ... ... ... ...|X| |
+ * ----------------------------------------------------------------------
+ * ^
+ * |- next_token
+ *
+ *
+ * Out-of-order pending at end
+ * ---------------------------
+ *
+ * |- xfer_id picked, last_token fixed
+ * -----+----------------------------------------------------------------
+ * |X|X| | | | |X|X| ... ... ... ... ... ... ... ... ... ... |X|X|X||X|X|
+ * ----------------------------------------------------------------------
+ * ^
+ * |- next_token
+ *
+ * Context: Assumes to be called with @xfer_lock already acquired.
+ *
+ * Return: 0 on Success or error
+ */
+static int scmi_xfer_token_set(struct scmi_xfers_info *minfo,
+ struct scmi_xfer *xfer)
+{
+ unsigned long xfer_id, next_token;
+
+ /*
+ * Pick a candidate monotonic token in range [0, MSG_TOKEN_MAX - 1]
+ * using the pre-allocated transfer_id as a base.
+ * Note that the global transfer_id is shared across all message types
+ * so there could be holes in the allocated set of monotonic sequence
+ * numbers, but that is going to limit the effectiveness of the
+ * mitigation only in very rare limit conditions.
+ */
+ next_token = (xfer->transfer_id & (MSG_TOKEN_MAX - 1));
+
+ /* Pick the next available xfer_id >= next_token */
+ xfer_id = find_next_zero_bit(minfo->xfer_alloc_table,
+ MSG_TOKEN_MAX, next_token);
+ if (xfer_id == MSG_TOKEN_MAX) {
+ /*
+ * After heavily out-of-order responses, there are no free
+ * tokens ahead, but only at start of xfer_alloc_table so
+ * try again from the beginning.
+ */
+ xfer_id = find_next_zero_bit(minfo->xfer_alloc_table,
+ MSG_TOKEN_MAX, 0);
+ /*
+ * Something is wrong if we got here since there can be a
+ * maximum number of (MSG_TOKEN_MAX - 1) in-flight messages
+ * but we have not found any free token [0, MSG_TOKEN_MAX - 1].
+ */
+ if (WARN_ON_ONCE(xfer_id == MSG_TOKEN_MAX))
+ return -ENOMEM;
+ }
+
+ /* Update +/- last_token accordingly if we skipped some hole */
+ if (xfer_id != next_token)
+ atomic_add((int)(xfer_id - next_token), &transfer_last_id);
+
+ /* Set in-flight */
+ set_bit(xfer_id, minfo->xfer_alloc_table);
+ xfer->hdr.seq = (u16)xfer_id;
+
+ return 0;
+}
+
+/**
+ * scmi_xfer_token_clear - Release the token
+ *
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @xfer: The xfer to act upon
+ */
+static inline void scmi_xfer_token_clear(struct scmi_xfers_info *minfo,
+ struct scmi_xfer *xfer)
+{
+ clear_bit(xfer->hdr.seq, minfo->xfer_alloc_table);
+}
+
+/**
* scmi_xfer_get() - Allocate one message
*
* @handle: Pointer to SCMI entity handle
* @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @set_pending: If true a monotonic token is picked and the xfer is added to
+ * the pending hash table.
*
* Helper function which is used by various message functions that are
* exposed to clients of this driver for allocating a message traffic event.
*
- * This function can sleep depending on pending requests already in the system
- * for the SCMI entity. Further, this also holds a spinlock to maintain
- * integrity of internal data structures.
+ * Picks an xfer from the free list @free_xfers (if any available) and, if
+ * required, sets a monotonically increasing token and stores the inflight xfer
+ * into the @pending_xfers hashtable for later retrieval.
+ *
+ * The successfully initialized xfer is refcounted.
+ *
+ * Context: Holds @xfer_lock while manipulating @xfer_alloc_table and
+ * @free_xfers.
*
* Return: 0 if all went fine, else corresponding error.
*/
static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
- struct scmi_xfers_info *minfo)
+ struct scmi_xfers_info *minfo,
+ bool set_pending)
{
- u16 xfer_id;
+ int ret;
+ unsigned long flags;
struct scmi_xfer *xfer;
- unsigned long flags, bit_pos;
- struct scmi_info *info = handle_to_scmi_info(handle);
- /* Keep the locked section as small as possible */
spin_lock_irqsave(&minfo->xfer_lock, flags);
- bit_pos = find_first_zero_bit(minfo->xfer_alloc_table,
- info->desc->max_msg);
- if (bit_pos == info->desc->max_msg) {
+ if (hlist_empty(&minfo->free_xfers)) {
spin_unlock_irqrestore(&minfo->xfer_lock, flags);
return ERR_PTR(-ENOMEM);
}
- set_bit(bit_pos, minfo->xfer_alloc_table);
- spin_unlock_irqrestore(&minfo->xfer_lock, flags);
- xfer_id = bit_pos;
+ /* grab an xfer from the free_list */
+ xfer = hlist_entry(minfo->free_xfers.first, struct scmi_xfer, node);
+ hlist_del_init(&xfer->node);
- xfer = &minfo->xfer_block[xfer_id];
- xfer->hdr.seq = xfer_id;
+ /*
+ * Allocate transfer_id early so that can be used also as base for
+ * monotonic sequence number generation if needed.
+ */
xfer->transfer_id = atomic_inc_return(&transfer_last_id);
+ if (set_pending) {
+ /* Pick and set monotonic token */
+ ret = scmi_xfer_token_set(minfo, xfer);
+ if (!ret) {
+ hash_add(minfo->pending_xfers, &xfer->node,
+ xfer->hdr.seq);
+ xfer->pending = true;
+ } else {
+ dev_err(handle->dev,
+ "Failed to get monotonic token %d\n", ret);
+ hlist_add_head(&xfer->node, &minfo->free_xfers);
+ xfer = ERR_PTR(ret);
+ }
+ }
+
+ if (!IS_ERR(xfer)) {
+ refcount_set(&xfer->users, 1);
+ atomic_set(&xfer->busy, SCMI_XFER_FREE);
+ }
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
return xfer;
}
@@ -253,6 +392,9 @@ static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
* @minfo: Pointer to Tx/Rx Message management info based on channel type
* @xfer: message that was reserved by scmi_xfer_get
*
+ * After refcount check, possibly release an xfer, clearing the token slot,
+ * removing xfer from @pending_xfers and putting it back into free_xfers.
+ *
* This holds a spinlock to maintain integrity of internal data structures.
*/
static void
@@ -260,17 +402,215 @@ __scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
{
unsigned long flags;
+ spin_lock_irqsave(&minfo->xfer_lock, flags);
+ if (refcount_dec_and_test(&xfer->users)) {
+ if (xfer->pending) {
+ scmi_xfer_token_clear(minfo, xfer);
+ hash_del(&xfer->node);
+ xfer->pending = false;
+ }
+ hlist_add_head(&xfer->node, &minfo->free_xfers);
+ }
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+}
+
+/**
+ * scmi_xfer_lookup_unlocked - Helper to lookup an xfer_id
+ *
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @xfer_id: Token ID to lookup in @pending_xfers
+ *
+ * Refcounting is untouched.
+ *
+ * Context: Assumes to be called with @xfer_lock already acquired.
+ *
+ * Return: A valid xfer on Success or error otherwise
+ */
+static struct scmi_xfer *
+scmi_xfer_lookup_unlocked(struct scmi_xfers_info *minfo, u16 xfer_id)
+{
+ struct scmi_xfer *xfer = NULL;
+
+ if (test_bit(xfer_id, minfo->xfer_alloc_table))
+ xfer = XFER_FIND(minfo->pending_xfers, xfer_id);
+
+ return xfer ?: ERR_PTR(-EINVAL);
+}
+
+/**
+ * scmi_msg_response_validate - Validate message type against state of related
+ * xfer
+ *
+ * @cinfo: A reference to the channel descriptor.
+ * @msg_type: Message type to check
+ * @xfer: A reference to the xfer to validate against @msg_type
+ *
+ * This function checks if @msg_type is congruent with the current state of
+ * a pending @xfer; if an asynchronous delayed response is received before the
+ * related synchronous response (Out-of-Order Delayed Response) the missing
+ * synchronous response is assumed to be OK and completed, carrying on with the
+ * Delayed Response: this is done to address the case in which the underlying
+ * SCMI transport can deliver such out-of-order responses.
+ *
+ * Context: Assumes to be called with xfer->lock already acquired.
+ *
+ * Return: 0 on Success, error otherwise
+ */
+static inline int scmi_msg_response_validate(struct scmi_chan_info *cinfo,
+ u8 msg_type,
+ struct scmi_xfer *xfer)
+{
/*
- * Keep the locked section as small as possible
- * NOTE: we might escape with smp_mb and no lock here..
- * but just be conservative and symmetric.
+ * Even if a response was indeed expected on this slot at this point,
+ * a buggy platform could wrongly reply feeding us an unexpected
+ * delayed response we're not prepared to handle: bail-out safely
+ * blaming firmware.
*/
+ if (msg_type == MSG_TYPE_DELAYED_RESP && !xfer->async_done) {
+ dev_err(cinfo->dev,
+ "Delayed Response for %d not expected! Buggy F/W ?\n",
+ xfer->hdr.seq);
+ return -EINVAL;
+ }
+
+ switch (xfer->state) {
+ case SCMI_XFER_SENT_OK:
+ if (msg_type == MSG_TYPE_DELAYED_RESP) {
+ /*
+ * Delayed Response expected but delivered earlier.
+ * Assume message RESPONSE was OK and skip state.
+ */
+ xfer->hdr.status = SCMI_SUCCESS;
+ xfer->state = SCMI_XFER_RESP_OK;
+ complete(&xfer->done);
+ dev_warn(cinfo->dev,
+ "Received valid OoO Delayed Response for %d\n",
+ xfer->hdr.seq);
+ }
+ break;
+ case SCMI_XFER_RESP_OK:
+ if (msg_type != MSG_TYPE_DELAYED_RESP)
+ return -EINVAL;
+ break;
+ case SCMI_XFER_DRESP_OK:
+ /* No further message expected once in SCMI_XFER_DRESP_OK */
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * scmi_xfer_state_update - Update xfer state
+ *
+ * @xfer: A reference to the xfer to update
+ * @msg_type: Type of message being processed.
+ *
+ * Note that this message is assumed to have been already successfully validated
+ * by @scmi_msg_response_validate(), so here we just update the state.
+ *
+ * Context: Assumes to be called on an xfer exclusively acquired using the
+ * busy flag.
+ */
+static inline void scmi_xfer_state_update(struct scmi_xfer *xfer, u8 msg_type)
+{
+ xfer->hdr.type = msg_type;
+
+ /* Unknown command types were already discarded earlier */
+ if (xfer->hdr.type == MSG_TYPE_COMMAND)
+ xfer->state = SCMI_XFER_RESP_OK;
+ else
+ xfer->state = SCMI_XFER_DRESP_OK;
+}
+
+static bool scmi_xfer_acquired(struct scmi_xfer *xfer)
+{
+ int ret;
+
+ ret = atomic_cmpxchg(&xfer->busy, SCMI_XFER_FREE, SCMI_XFER_BUSY);
+
+ return ret == SCMI_XFER_FREE;
+}
+
+/**
+ * scmi_xfer_command_acquire - Helper to lookup and acquire a command xfer
+ *
+ * @cinfo: A reference to the channel descriptor.
+ * @msg_hdr: A message header to use as lookup key
+ *
+ * When a valid xfer is found for the sequence number embedded in the provided
+ * msg_hdr, reference counting is properly updated and exclusive access to this
+ * xfer is granted till released with @scmi_xfer_command_release.
+ *
+ * Return: A valid @xfer on Success or error otherwise.
+ */
+static inline struct scmi_xfer *
+scmi_xfer_command_acquire(struct scmi_chan_info *cinfo, u32 msg_hdr)
+{
+ int ret;
+ unsigned long flags;
+ struct scmi_xfer *xfer;
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ struct scmi_xfers_info *minfo = &info->tx_minfo;
+ u8 msg_type = MSG_XTRACT_TYPE(msg_hdr);
+ u16 xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
+
+ /* Are we even expecting this? */
spin_lock_irqsave(&minfo->xfer_lock, flags);
- clear_bit(xfer->hdr.seq, minfo->xfer_alloc_table);
+ xfer = scmi_xfer_lookup_unlocked(minfo, xfer_id);
+ if (IS_ERR(xfer)) {
+ dev_err(cinfo->dev,
+ "Message for %d type %d is not expected!\n",
+ xfer_id, msg_type);
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+ return xfer;
+ }
+ refcount_inc(&xfer->users);
spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+ spin_lock_irqsave(&xfer->lock, flags);
+ ret = scmi_msg_response_validate(cinfo, msg_type, xfer);
+ /*
+ * If a pending xfer was found which was also in a congruent state with
+ * the received message, acquire exclusive access to it setting the busy
+ * flag.
+ * Spins only on the rare limit condition of concurrent reception of
+ * RESP and DRESP for the same xfer.
+ */
+ if (!ret) {
+ spin_until_cond(scmi_xfer_acquired(xfer));
+ scmi_xfer_state_update(xfer, msg_type);
+ }
+ spin_unlock_irqrestore(&xfer->lock, flags);
+
+ if (ret) {
+ dev_err(cinfo->dev,
+ "Invalid message type:%d for %d - HDR:0x%X state:%d\n",
+ msg_type, xfer_id, msg_hdr, xfer->state);
+ /* On error the refcount incremented above has to be dropped */
+ __scmi_xfer_put(minfo, xfer);
+ xfer = ERR_PTR(-EINVAL);
+ }
+
+ return xfer;
+}
+
+static inline void scmi_xfer_command_release(struct scmi_info *info,
+ struct scmi_xfer *xfer)
+{
+ atomic_set(&xfer->busy, SCMI_XFER_FREE);
+ __scmi_xfer_put(&info->tx_minfo, xfer);
+}
+
+static inline void scmi_clear_channel(struct scmi_info *info,
+ struct scmi_chan_info *cinfo)
+{
+ if (info->desc->ops->clear_channel)
+ info->desc->ops->clear_channel(cinfo);
}
-static void scmi_handle_notification(struct scmi_chan_info *cinfo, u32 msg_hdr)
+static void scmi_handle_notification(struct scmi_chan_info *cinfo,
+ u32 msg_hdr, void *priv)
{
struct scmi_xfer *xfer;
struct device *dev = cinfo->dev;
@@ -279,16 +619,17 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo, u32 msg_hdr)
ktime_t ts;
ts = ktime_get_boottime();
- xfer = scmi_xfer_get(cinfo->handle, minfo);
+ xfer = scmi_xfer_get(cinfo->handle, minfo, false);
if (IS_ERR(xfer)) {
dev_err(dev, "failed to get free message slot (%ld)\n",
PTR_ERR(xfer));
- info->desc->ops->clear_channel(cinfo);
+ scmi_clear_channel(info, cinfo);
return;
}
unpack_scmi_header(msg_hdr, &xfer->hdr);
- scmi_dump_header_dbg(dev, &xfer->hdr);
+ if (priv)
+ xfer->priv = priv;
info->desc->ops->fetch_notification(cinfo, info->desc->max_msg_size,
xfer);
scmi_notify(cinfo->handle, xfer->hdr.protocol_id,
@@ -300,59 +641,41 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo, u32 msg_hdr)
__scmi_xfer_put(minfo, xfer);
- info->desc->ops->clear_channel(cinfo);
+ scmi_clear_channel(info, cinfo);
}
static void scmi_handle_response(struct scmi_chan_info *cinfo,
- u16 xfer_id, u8 msg_type)
+ u32 msg_hdr, void *priv)
{
struct scmi_xfer *xfer;
- struct device *dev = cinfo->dev;
struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
- struct scmi_xfers_info *minfo = &info->tx_minfo;
- /* Are we even expecting this? */
- if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
- dev_err(dev, "message for %d is not expected!\n", xfer_id);
- info->desc->ops->clear_channel(cinfo);
- return;
- }
-
- xfer = &minfo->xfer_block[xfer_id];
- /*
- * Even if a response was indeed expected on this slot at this point,
- * a buggy platform could wrongly reply feeding us an unexpected
- * delayed response we're not prepared to handle: bail-out safely
- * blaming firmware.
- */
- if (unlikely(msg_type == MSG_TYPE_DELAYED_RESP && !xfer->async_done)) {
- dev_err(dev,
- "Delayed Response for %d not expected! Buggy F/W ?\n",
- xfer_id);
- info->desc->ops->clear_channel(cinfo);
- /* It was unexpected, so nobody will clear the xfer if not us */
- __scmi_xfer_put(minfo, xfer);
+ xfer = scmi_xfer_command_acquire(cinfo, msg_hdr);
+ if (IS_ERR(xfer)) {
+ scmi_clear_channel(info, cinfo);
return;
}
/* rx.len could be shrunk in the sync do_xfer, so reset to maxsz */
- if (msg_type == MSG_TYPE_DELAYED_RESP)
+ if (xfer->hdr.type == MSG_TYPE_DELAYED_RESP)
xfer->rx.len = info->desc->max_msg_size;
- scmi_dump_header_dbg(dev, &xfer->hdr);
-
+ if (priv)
+ xfer->priv = priv;
info->desc->ops->fetch_response(cinfo, xfer);
trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id,
xfer->hdr.protocol_id, xfer->hdr.seq,
- msg_type);
+ xfer->hdr.type);
- if (msg_type == MSG_TYPE_DELAYED_RESP) {
- info->desc->ops->clear_channel(cinfo);
+ if (xfer->hdr.type == MSG_TYPE_DELAYED_RESP) {
+ scmi_clear_channel(info, cinfo);
complete(xfer->async_done);
} else {
complete(&xfer->done);
}
+
+ scmi_xfer_command_release(info, xfer);
}
/**
@@ -360,6 +683,7 @@ static void scmi_handle_response(struct scmi_chan_info *cinfo,
*
* @cinfo: SCMI channel info
* @msg_hdr: Message header
+ * @priv: Transport specific private data.
*
* Processes one received message to appropriate transfer information and
* signals completion of the transfer.
@@ -367,18 +691,17 @@ static void scmi_handle_response(struct scmi_chan_info *cinfo,
* NOTE: This function will be invoked in IRQ context, hence should be
* as optimal as possible.
*/
-void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr)
+void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv)
{
- u16 xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
u8 msg_type = MSG_XTRACT_TYPE(msg_hdr);
switch (msg_type) {
case MSG_TYPE_NOTIFICATION:
- scmi_handle_notification(cinfo, msg_hdr);
+ scmi_handle_notification(cinfo, msg_hdr, priv);
break;
case MSG_TYPE_COMMAND:
case MSG_TYPE_DELAYED_RESP:
- scmi_handle_response(cinfo, xfer_id, msg_type);
+ scmi_handle_response(cinfo, msg_hdr, priv);
break;
default:
WARN_ONCE(1, "received unknown msg_type:%d\n", msg_type);
@@ -390,7 +713,7 @@ void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr)
* xfer_put() - Release a transmit message
*
* @ph: Pointer to SCMI protocol handle
- * @xfer: message that was reserved by scmi_xfer_get
+ * @xfer: message that was reserved by xfer_get_init
*/
static void xfer_put(const struct scmi_protocol_handle *ph,
struct scmi_xfer *xfer)
@@ -408,7 +731,12 @@ static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo,
{
struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ /*
+ * Poll also on xfer->done so that polling can be forcibly terminated
+ * in case of out-of-order receptions of delayed responses
+ */
return info->desc->ops->poll_done(cinfo, xfer) ||
+ try_wait_for_completion(&xfer->done) ||
ktime_after(ktime_get(), stop);
}
@@ -432,6 +760,12 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
struct device *dev = info->dev;
struct scmi_chan_info *cinfo;
+ if (xfer->hdr.poll_completion && !info->desc->ops->poll_done) {
+ dev_warn_once(dev,
+ "Polling mode is not supported by transport.\n");
+ return -EINVAL;
+ }
+
/*
* Initialise protocol id now from protocol handle to avoid it being
* overridden by mistake (or malice) by the protocol code mangling with
@@ -448,6 +782,16 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
xfer->hdr.protocol_id, xfer->hdr.seq,
xfer->hdr.poll_completion);
+ xfer->state = SCMI_XFER_SENT_OK;
+ /*
+ * Even though spinlocking is not needed here since no race is possible
+ * on xfer->state due to the monotonically increasing tokens allocation,
+ * we must anyway ensure xfer->state initialization is not re-ordered
+ * after the .send_message() to be sure that on the RX path an early
+ * ISR calling scmi_rx_callback() cannot see an old stale xfer->state.
+ */
+ smp_mb();
+
ret = info->desc->ops->send_message(cinfo, xfer);
if (ret < 0) {
dev_dbg(dev, "Failed to send message %d\n", ret);
@@ -458,11 +802,22 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
ktime_t stop = ktime_add_ns(ktime_get(), SCMI_MAX_POLL_TO_NS);
spin_until_cond(scmi_xfer_done_no_timeout(cinfo, xfer, stop));
-
- if (ktime_before(ktime_get(), stop))
- info->desc->ops->fetch_response(cinfo, xfer);
- else
+ if (ktime_before(ktime_get(), stop)) {
+ unsigned long flags;
+
+ /*
+ * Do not fetch_response if an out-of-order delayed
+ * response is being processed.
+ */
+ spin_lock_irqsave(&xfer->lock, flags);
+ if (xfer->state == SCMI_XFER_SENT_OK) {
+ info->desc->ops->fetch_response(cinfo, xfer);
+ xfer->state = SCMI_XFER_RESP_OK;
+ }
+ spin_unlock_irqrestore(&xfer->lock, flags);
+ } else {
ret = -ETIMEDOUT;
+ }
} else {
/* And we wait for the response. */
timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
@@ -557,7 +912,7 @@ static int xfer_get_init(const struct scmi_protocol_handle *ph,
tx_size > info->desc->max_msg_size)
return -ERANGE;
- xfer = scmi_xfer_get(pi->handle, minfo);
+ xfer = scmi_xfer_get(pi->handle, minfo, true);
if (IS_ERR(xfer)) {
ret = PTR_ERR(xfer);
dev_err(dev, "failed to get free message slot(%d)\n", ret);
@@ -566,6 +921,7 @@ static int xfer_get_init(const struct scmi_protocol_handle *ph,
xfer->tx.len = tx_size;
xfer->rx.len = rx_size ? : info->desc->max_msg_size;
+ xfer->hdr.type = MSG_TYPE_COMMAND;
xfer->hdr.id = msg_id;
xfer->hdr.poll_completion = false;
@@ -1026,25 +1382,32 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
const struct scmi_desc *desc = sinfo->desc;
/* Pre-allocated messages, no more than what hdr.seq can support */
- if (WARN_ON(!desc->max_msg || desc->max_msg > MSG_TOKEN_MAX)) {
+ if (WARN_ON(!info->max_msg || info->max_msg > MSG_TOKEN_MAX)) {
dev_err(dev,
"Invalid maximum messages %d, not in range [1 - %lu]\n",
- desc->max_msg, MSG_TOKEN_MAX);
+ info->max_msg, MSG_TOKEN_MAX);
return -EINVAL;
}
- info->xfer_block = devm_kcalloc(dev, desc->max_msg,
- sizeof(*info->xfer_block), GFP_KERNEL);
- if (!info->xfer_block)
- return -ENOMEM;
+ hash_init(info->pending_xfers);
- info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(desc->max_msg),
+ /* Allocate a bitmask sized to hold MSG_TOKEN_MAX tokens */
+ info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(MSG_TOKEN_MAX),
sizeof(long), GFP_KERNEL);
if (!info->xfer_alloc_table)
return -ENOMEM;
- /* Pre-initialize the buffer pointer to pre-allocated buffers */
- for (i = 0, xfer = info->xfer_block; i < desc->max_msg; i++, xfer++) {
+ /*
+ * Preallocate a number of xfers equal to max inflight messages,
+ * pre-initialize the buffer pointer to pre-allocated buffers and
+ * attach all of them to the free list
+ */
+ INIT_HLIST_HEAD(&info->free_xfers);
+ for (i = 0; i < info->max_msg; i++) {
+ xfer = devm_kzalloc(dev, sizeof(*xfer), GFP_KERNEL);
+ if (!xfer)
+ return -ENOMEM;
+
xfer->rx.buf = devm_kcalloc(dev, sizeof(u8), desc->max_msg_size,
GFP_KERNEL);
if (!xfer->rx.buf)
@@ -1052,6 +1415,10 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
xfer->tx.buf = xfer->rx.buf;
init_completion(&xfer->done);
+ spin_lock_init(&xfer->lock);
+
+ /* Add initialized xfer to the free list */
+ hlist_add_head(&xfer->node, &info->free_xfers);
}
spin_lock_init(&info->xfer_lock);
@@ -1059,10 +1426,40 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
return 0;
}
+static int scmi_channels_max_msg_configure(struct scmi_info *sinfo)
+{
+ const struct scmi_desc *desc = sinfo->desc;
+
+ if (!desc->ops->get_max_msg) {
+ sinfo->tx_minfo.max_msg = desc->max_msg;
+ sinfo->rx_minfo.max_msg = desc->max_msg;
+ } else {
+ struct scmi_chan_info *base_cinfo;
+
+ base_cinfo = idr_find(&sinfo->tx_idr, SCMI_PROTOCOL_BASE);
+ if (!base_cinfo)
+ return -EINVAL;
+ sinfo->tx_minfo.max_msg = desc->ops->get_max_msg(base_cinfo);
+
+ /* RX channel is optional so can be skipped */
+ base_cinfo = idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE);
+ if (base_cinfo)
+ sinfo->rx_minfo.max_msg =
+ desc->ops->get_max_msg(base_cinfo);
+ }
+
+ return 0;
+}
+
static int scmi_xfer_info_init(struct scmi_info *sinfo)
{
- int ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo);
+ int ret;
+
+ ret = scmi_channels_max_msg_configure(sinfo);
+ if (ret)
+ return ret;
+ ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo);
if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE))
ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo);
@@ -1390,6 +1787,21 @@ void scmi_protocol_device_unrequest(const struct scmi_device_id *id_table)
mutex_unlock(&scmi_requested_devices_mtx);
}
+static int scmi_cleanup_txrx_channels(struct scmi_info *info)
+{
+ int ret;
+ struct idr *idr = &info->tx_idr;
+
+ ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
+ idr_destroy(&info->tx_idr);
+
+ idr = &info->rx_idr;
+ ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
+ idr_destroy(&info->rx_idr);
+
+ return ret;
+}
+
static int scmi_probe(struct platform_device *pdev)
{
int ret;
@@ -1424,13 +1836,19 @@ static int scmi_probe(struct platform_device *pdev)
handle->devm_protocol_get = scmi_devm_protocol_get;
handle->devm_protocol_put = scmi_devm_protocol_put;
+ if (desc->ops->link_supplier) {
+ ret = desc->ops->link_supplier(dev);
+ if (ret)
+ return ret;
+ }
+
ret = scmi_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
if (ret)
return ret;
ret = scmi_xfer_info_init(info);
if (ret)
- return ret;
+ goto clear_txrx_setup;
if (scmi_notification_init(handle))
dev_err(dev, "SCMI Notifications NOT available.\n");
@@ -1443,7 +1861,7 @@ static int scmi_probe(struct platform_device *pdev)
ret = scmi_protocol_acquire(handle, SCMI_PROTOCOL_BASE);
if (ret) {
dev_err(dev, "unable to communicate with SCMI\n");
- return ret;
+ goto notification_exit;
}
mutex_lock(&scmi_list_mutex);
@@ -1482,6 +1900,12 @@ static int scmi_probe(struct platform_device *pdev)
}
return 0;
+
+notification_exit:
+ scmi_notification_exit(&info->handle);
+clear_txrx_setup:
+ scmi_cleanup_txrx_channels(info);
+ return ret;
}
void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id)
@@ -1493,7 +1917,6 @@ static int scmi_remove(struct platform_device *pdev)
{
int ret = 0, id;
struct scmi_info *info = platform_get_drvdata(pdev);
- struct idr *idr = &info->tx_idr;
struct device_node *child;
mutex_lock(&scmi_list_mutex);
@@ -1517,14 +1940,7 @@ static int scmi_remove(struct platform_device *pdev)
idr_destroy(&info->active_protocols);
/* Safe to free channels since no more users */
- ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
- idr_destroy(&info->tx_idr);
-
- idr = &info->rx_idr;
- ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
- idr_destroy(&info->rx_idr);
-
- return ret;
+ return scmi_cleanup_txrx_channels(info);
}
static ssize_t protocol_version_show(struct device *dev,
@@ -1575,12 +1991,15 @@ ATTRIBUTE_GROUPS(versions);
/* Each compatible listed below must have descriptor associated with it */
static const struct of_device_id scmi_of_match[] = {
-#ifdef CONFIG_MAILBOX
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_MAILBOX
{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
#endif
-#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC
{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
#endif
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
+ { .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
+#endif
{ /* Sentinel */ },
};
@@ -1596,10 +2015,69 @@ static struct platform_driver scmi_driver = {
.remove = scmi_remove,
};
+/**
+ * __scmi_transports_setup - Common helper to call transport-specific
+ * .init/.exit code if provided.
+ *
+ * @init: A flag to distinguish between init and exit.
+ *
+ * Note that, if provided, we invoke .init/.exit functions for all the
+ * transports currently compiled in.
+ *
+ * Return: 0 on Success.
+ */
+static inline int __scmi_transports_setup(bool init)
+{
+ int ret = 0;
+ const struct of_device_id *trans;
+
+ for (trans = scmi_of_match; trans->data; trans++) {
+ const struct scmi_desc *tdesc = trans->data;
+
+ if ((init && !tdesc->transport_init) ||
+ (!init && !tdesc->transport_exit))
+ continue;
+
+ if (init)
+ ret = tdesc->transport_init();
+ else
+ tdesc->transport_exit();
+
+ if (ret) {
+ pr_err("SCMI transport %s FAILED initialization!\n",
+ trans->compatible);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int __init scmi_transports_init(void)
+{
+ return __scmi_transports_setup(true);
+}
+
+static void __exit scmi_transports_exit(void)
+{
+ __scmi_transports_setup(false);
+}
+
static int __init scmi_driver_init(void)
{
+ int ret;
+
+ /* Bail out if no SCMI transport was configured */
+ if (WARN_ON(!IS_ENABLED(CONFIG_ARM_SCMI_HAVE_TRANSPORT)))
+ return -EINVAL;
+
scmi_bus_init();
+ /* Initialize any compiled-in transport which provided an init/exit */
+ ret = scmi_transports_init();
+ if (ret)
+ return ret;
+
scmi_base_register();
scmi_clock_register();
@@ -1628,6 +2106,8 @@ static void __exit scmi_driver_exit(void)
scmi_bus_exit();
+ scmi_transports_exit();
+
platform_driver_unregister(&scmi_driver);
}
module_exit(scmi_driver_exit);
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
index e3dcb58314ae..e09eb12bf421 100644
--- a/drivers/firmware/arm_scmi/mailbox.c
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -43,7 +43,7 @@ static void rx_callback(struct mbox_client *cl, void *m)
{
struct scmi_mailbox *smbox = client_to_scmi_mailbox(cl);
- scmi_rx_callback(smbox->cinfo, shmem_read_header(smbox->shmem));
+ scmi_rx_callback(smbox->cinfo, shmem_read_header(smbox->shmem), NULL);
}
static bool mailbox_chan_available(struct device *dev, int idx)
diff --git a/drivers/firmware/arm_scmi/msg.c b/drivers/firmware/arm_scmi/msg.c
new file mode 100644
index 000000000000..d33a704e5814
--- /dev/null
+++ b/drivers/firmware/arm_scmi/msg.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * For transports using message passing.
+ *
+ * Derived from shm.c.
+ *
+ * Copyright (C) 2019-2021 ARM Ltd.
+ * Copyright (C) 2020-2021 OpenSynergy GmbH
+ */
+
+#include <linux/types.h>
+
+#include "common.h"
+
+/*
+ * struct scmi_msg_payld - Transport SDU layout
+ *
+ * The SCMI specification requires all parameters, message headers, return
+ * arguments or any protocol data to be expressed in little endian format only.
+ */
+struct scmi_msg_payld {
+ __le32 msg_header;
+ __le32 msg_payload[];
+};
+
+/**
+ * msg_command_size() - Actual size of transport SDU for command.
+ *
+ * @xfer: message which core has prepared for sending
+ *
+ * Return: transport SDU size.
+ */
+size_t msg_command_size(struct scmi_xfer *xfer)
+{
+ return sizeof(struct scmi_msg_payld) + xfer->tx.len;
+}
+
+/**
+ * msg_response_size() - Maximum size of transport SDU for response.
+ *
+ * @xfer: message which core has prepared for sending
+ *
+ * Return: transport SDU size.
+ */
+size_t msg_response_size(struct scmi_xfer *xfer)
+{
+ return sizeof(struct scmi_msg_payld) + sizeof(__le32) + xfer->rx.len;
+}
+
+/**
+ * msg_tx_prepare() - Set up transport SDU for command.
+ *
+ * @msg: transport SDU for command
+ * @xfer: message which is being sent
+ */
+void msg_tx_prepare(struct scmi_msg_payld *msg, struct scmi_xfer *xfer)
+{
+ msg->msg_header = cpu_to_le32(pack_scmi_header(&xfer->hdr));
+ if (xfer->tx.buf)
+ memcpy(msg->msg_payload, xfer->tx.buf, xfer->tx.len);
+}
+
+/**
+ * msg_read_header() - Read SCMI header from transport SDU.
+ *
+ * @msg: transport SDU
+ *
+ * Return: SCMI header
+ */
+u32 msg_read_header(struct scmi_msg_payld *msg)
+{
+ return le32_to_cpu(msg->msg_header);
+}
+
+/**
+ * msg_fetch_response() - Fetch response SCMI payload from transport SDU.
+ *
+ * @msg: transport SDU with response
+ * @len: transport SDU size
+ * @xfer: message being responded to
+ */
+void msg_fetch_response(struct scmi_msg_payld *msg, size_t len,
+ struct scmi_xfer *xfer)
+{
+ size_t prefix_len = sizeof(*msg) + sizeof(msg->msg_payload[0]);
+
+ xfer->hdr.status = le32_to_cpu(msg->msg_payload[0]);
+ xfer->rx.len = min_t(size_t, xfer->rx.len,
+ len >= prefix_len ? len - prefix_len : 0);
+
+ /* Take a copy to the rx buffer.. */
+ memcpy(xfer->rx.buf, &msg->msg_payload[1], xfer->rx.len);
+}
+
+/**
+ * msg_fetch_notification() - Fetch notification payload from transport SDU.
+ *
+ * @msg: transport SDU with notification
+ * @len: transport SDU size
+ * @max_len: maximum SCMI payload size to fetch
+ * @xfer: notification message
+ */
+void msg_fetch_notification(struct scmi_msg_payld *msg, size_t len,
+ size_t max_len, struct scmi_xfer *xfer)
+{
+ xfer->rx.len = min_t(size_t, max_len,
+ len >= sizeof(*msg) ? len - sizeof(*msg) : 0);
+
+ /* Take a copy to the rx buffer.. */
+ memcpy(xfer->rx.buf, msg->msg_payload, xfer->rx.len);
+}
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
index bed5596c7209..4effecc3bb46 100644
--- a/drivers/firmware/arm_scmi/smc.c
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -154,7 +154,8 @@ static int smc_send_message(struct scmi_chan_info *cinfo,
if (scmi_info->irq)
wait_for_completion(&scmi_info->tx_complete);
- scmi_rx_callback(scmi_info->cinfo, shmem_read_header(scmi_info->shmem));
+ scmi_rx_callback(scmi_info->cinfo,
+ shmem_read_header(scmi_info->shmem), NULL);
mutex_unlock(&scmi_info->shmem_lock);
diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c
new file mode 100644
index 000000000000..224577f86928
--- /dev/null
+++ b/drivers/firmware/arm_scmi/virtio.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Virtio Transport driver for Arm System Control and Management Interface
+ * (SCMI).
+ *
+ * Copyright (C) 2020-2021 OpenSynergy.
+ * Copyright (C) 2021 ARM Ltd.
+ */
+
+/**
+ * DOC: Theory of Operation
+ *
+ * The scmi-virtio transport implements a driver for the virtio SCMI device.
+ *
+ * There is one Tx channel (virtio cmdq, A2P channel) and at most one Rx
+ * channel (virtio eventq, P2A channel). Each channel is implemented through a
+ * virtqueue. Access to each virtqueue is protected by spinlocks.
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+
+#include <uapi/linux/virtio_ids.h>
+#include <uapi/linux/virtio_scmi.h>
+
+#include "common.h"
+
+#define VIRTIO_SCMI_MAX_MSG_SIZE 128 /* Value may be increased. */
+#define VIRTIO_SCMI_MAX_PDU_SIZE \
+ (VIRTIO_SCMI_MAX_MSG_SIZE + SCMI_MSG_MAX_PROT_OVERHEAD)
+#define DESCRIPTORS_PER_TX_MSG 2
+
+/**
+ * struct scmi_vio_channel - Transport channel information
+ *
+ * @vqueue: Associated virtqueue
+ * @cinfo: SCMI Tx or Rx channel
+ * @free_list: List of unused scmi_vio_msg, maintained for Tx channels only
+ * @is_rx: Whether channel is an Rx channel
+ * @ready: Whether transport user is ready to hear about channel
+ * @max_msg: Maximum number of pending messages for this channel.
+ * @lock: Protects access to all members except ready.
+ * @ready_lock: Protects access to ready. If required, it must be taken before
+ * lock.
+ */
+struct scmi_vio_channel {
+ struct virtqueue *vqueue;
+ struct scmi_chan_info *cinfo;
+ struct list_head free_list;
+ bool is_rx;
+ bool ready;
+ unsigned int max_msg;
+ /* lock to protect access to all members except ready. */
+ spinlock_t lock;
+ /* lock to rotects access to ready flag. */
+ spinlock_t ready_lock;
+};
+
+/**
+ * struct scmi_vio_msg - Transport PDU information
+ *
+ * @request: SDU used for commands
+ * @input: SDU used for (delayed) responses and notifications
+ * @list: List which scmi_vio_msg may be part of
+ * @rx_len: Input SDU size in bytes, once input has been received
+ */
+struct scmi_vio_msg {
+ struct scmi_msg_payld *request;
+ struct scmi_msg_payld *input;
+ struct list_head list;
+ unsigned int rx_len;
+};
+
+/* Only one SCMI VirtIO device can possibly exist */
+static struct virtio_device *scmi_vdev;
+
+static bool scmi_vio_have_vq_rx(struct virtio_device *vdev)
+{
+ return virtio_has_feature(vdev, VIRTIO_SCMI_F_P2A_CHANNELS);
+}
+
+static int scmi_vio_feed_vq_rx(struct scmi_vio_channel *vioch,
+ struct scmi_vio_msg *msg)
+{
+ struct scatterlist sg_in;
+ int rc;
+ unsigned long flags;
+
+ sg_init_one(&sg_in, msg->input, VIRTIO_SCMI_MAX_PDU_SIZE);
+
+ spin_lock_irqsave(&vioch->lock, flags);
+
+ rc = virtqueue_add_inbuf(vioch->vqueue, &sg_in, 1, msg, GFP_ATOMIC);
+ if (rc)
+ dev_err_once(vioch->cinfo->dev,
+ "failed to add to virtqueue (%d)\n", rc);
+ else
+ virtqueue_kick(vioch->vqueue);
+
+ spin_unlock_irqrestore(&vioch->lock, flags);
+
+ return rc;
+}
+
+static void scmi_finalize_message(struct scmi_vio_channel *vioch,
+ struct scmi_vio_msg *msg)
+{
+ if (vioch->is_rx) {
+ scmi_vio_feed_vq_rx(vioch, msg);
+ } else {
+ unsigned long flags;
+
+ spin_lock_irqsave(&vioch->lock, flags);
+ list_add(&msg->list, &vioch->free_list);
+ spin_unlock_irqrestore(&vioch->lock, flags);
+ }
+}
+
+static void scmi_vio_complete_cb(struct virtqueue *vqueue)
+{
+ unsigned long ready_flags;
+ unsigned long flags;
+ unsigned int length;
+ struct scmi_vio_channel *vioch;
+ struct scmi_vio_msg *msg;
+ bool cb_enabled = true;
+
+ if (WARN_ON_ONCE(!vqueue->vdev->priv))
+ return;
+ vioch = &((struct scmi_vio_channel *)vqueue->vdev->priv)[vqueue->index];
+
+ for (;;) {
+ spin_lock_irqsave(&vioch->ready_lock, ready_flags);
+
+ if (!vioch->ready) {
+ if (!cb_enabled)
+ (void)virtqueue_enable_cb(vqueue);
+ goto unlock_ready_out;
+ }
+
+ spin_lock_irqsave(&vioch->lock, flags);
+ if (cb_enabled) {
+ virtqueue_disable_cb(vqueue);
+ cb_enabled = false;
+ }
+ msg = virtqueue_get_buf(vqueue, &length);
+ if (!msg) {
+ if (virtqueue_enable_cb(vqueue))
+ goto unlock_out;
+ cb_enabled = true;
+ }
+ spin_unlock_irqrestore(&vioch->lock, flags);
+
+ if (msg) {
+ msg->rx_len = length;
+ scmi_rx_callback(vioch->cinfo,
+ msg_read_header(msg->input), msg);
+
+ scmi_finalize_message(vioch, msg);
+ }
+
+ spin_unlock_irqrestore(&vioch->ready_lock, ready_flags);
+ }
+
+unlock_out:
+ spin_unlock_irqrestore(&vioch->lock, flags);
+unlock_ready_out:
+ spin_unlock_irqrestore(&vioch->ready_lock, ready_flags);
+}
+
+static const char *const scmi_vio_vqueue_names[] = { "tx", "rx" };
+
+static vq_callback_t *scmi_vio_complete_callbacks[] = {
+ scmi_vio_complete_cb,
+ scmi_vio_complete_cb
+};
+
+static unsigned int virtio_get_max_msg(struct scmi_chan_info *base_cinfo)
+{
+ struct scmi_vio_channel *vioch = base_cinfo->transport_info;
+
+ return vioch->max_msg;
+}
+
+static int virtio_link_supplier(struct device *dev)
+{
+ if (!scmi_vdev) {
+ dev_notice_once(dev,
+ "Deferring probe after not finding a bound scmi-virtio device\n");
+ return -EPROBE_DEFER;
+ }
+
+ if (!device_link_add(dev, &scmi_vdev->dev,
+ DL_FLAG_AUTOREMOVE_CONSUMER)) {
+ dev_err(dev, "Adding link to supplier virtio device failed\n");
+ return -ECANCELED;
+ }
+
+ return 0;
+}
+
+static bool virtio_chan_available(struct device *dev, int idx)
+{
+ struct scmi_vio_channel *channels, *vioch = NULL;
+
+ if (WARN_ON_ONCE(!scmi_vdev))
+ return false;
+
+ channels = (struct scmi_vio_channel *)scmi_vdev->priv;
+
+ switch (idx) {
+ case VIRTIO_SCMI_VQ_TX:
+ vioch = &channels[VIRTIO_SCMI_VQ_TX];
+ break;
+ case VIRTIO_SCMI_VQ_RX:
+ if (scmi_vio_have_vq_rx(scmi_vdev))
+ vioch = &channels[VIRTIO_SCMI_VQ_RX];
+ break;
+ default:
+ return false;
+ }
+
+ return vioch && !vioch->cinfo;
+}
+
+static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
+ bool tx)
+{
+ unsigned long flags;
+ struct scmi_vio_channel *vioch;
+ int index = tx ? VIRTIO_SCMI_VQ_TX : VIRTIO_SCMI_VQ_RX;
+ int i;
+
+ if (!scmi_vdev)
+ return -EPROBE_DEFER;
+
+ vioch = &((struct scmi_vio_channel *)scmi_vdev->priv)[index];
+
+ for (i = 0; i < vioch->max_msg; i++) {
+ struct scmi_vio_msg *msg;
+
+ msg = devm_kzalloc(cinfo->dev, sizeof(*msg), GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ if (tx) {
+ msg->request = devm_kzalloc(cinfo->dev,
+ VIRTIO_SCMI_MAX_PDU_SIZE,
+ GFP_KERNEL);
+ if (!msg->request)
+ return -ENOMEM;
+ }
+
+ msg->input = devm_kzalloc(cinfo->dev, VIRTIO_SCMI_MAX_PDU_SIZE,
+ GFP_KERNEL);
+ if (!msg->input)
+ return -ENOMEM;
+
+ if (tx) {
+ spin_lock_irqsave(&vioch->lock, flags);
+ list_add_tail(&msg->list, &vioch->free_list);
+ spin_unlock_irqrestore(&vioch->lock, flags);
+ } else {
+ scmi_vio_feed_vq_rx(vioch, msg);
+ }
+ }
+
+ spin_lock_irqsave(&vioch->lock, flags);
+ cinfo->transport_info = vioch;
+ /* Indirectly setting channel not available any more */
+ vioch->cinfo = cinfo;
+ spin_unlock_irqrestore(&vioch->lock, flags);
+
+ spin_lock_irqsave(&vioch->ready_lock, flags);
+ vioch->ready = true;
+ spin_unlock_irqrestore(&vioch->ready_lock, flags);
+
+ return 0;
+}
+
+static int virtio_chan_free(int id, void *p, void *data)
+{
+ unsigned long flags;
+ struct scmi_chan_info *cinfo = p;
+ struct scmi_vio_channel *vioch = cinfo->transport_info;
+
+ spin_lock_irqsave(&vioch->ready_lock, flags);
+ vioch->ready = false;
+ spin_unlock_irqrestore(&vioch->ready_lock, flags);
+
+ scmi_free_channel(cinfo, data, id);
+
+ spin_lock_irqsave(&vioch->lock, flags);
+ vioch->cinfo = NULL;
+ spin_unlock_irqrestore(&vioch->lock, flags);
+
+ return 0;
+}
+
+static int virtio_send_message(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer)
+{
+ struct scmi_vio_channel *vioch = cinfo->transport_info;
+ struct scatterlist sg_out;
+ struct scatterlist sg_in;
+ struct scatterlist *sgs[DESCRIPTORS_PER_TX_MSG] = { &sg_out, &sg_in };
+ unsigned long flags;
+ int rc;
+ struct scmi_vio_msg *msg;
+
+ spin_lock_irqsave(&vioch->lock, flags);
+
+ if (list_empty(&vioch->free_list)) {
+ spin_unlock_irqrestore(&vioch->lock, flags);
+ return -EBUSY;
+ }
+
+ msg = list_first_entry(&vioch->free_list, typeof(*msg), list);
+ list_del(&msg->list);
+
+ msg_tx_prepare(msg->request, xfer);
+
+ sg_init_one(&sg_out, msg->request, msg_command_size(xfer));
+ sg_init_one(&sg_in, msg->input, msg_response_size(xfer));
+
+ rc = virtqueue_add_sgs(vioch->vqueue, sgs, 1, 1, msg, GFP_ATOMIC);
+ if (rc) {
+ list_add(&msg->list, &vioch->free_list);
+ dev_err_once(vioch->cinfo->dev,
+ "%s() failed to add to virtqueue (%d)\n", __func__,
+ rc);
+ } else {
+ virtqueue_kick(vioch->vqueue);
+ }
+
+ spin_unlock_irqrestore(&vioch->lock, flags);
+
+ return rc;
+}
+
+static void virtio_fetch_response(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer)
+{
+ struct scmi_vio_msg *msg = xfer->priv;
+
+ if (msg) {
+ msg_fetch_response(msg->input, msg->rx_len, xfer);
+ xfer->priv = NULL;
+ }
+}
+
+static void virtio_fetch_notification(struct scmi_chan_info *cinfo,
+ size_t max_len, struct scmi_xfer *xfer)
+{
+ struct scmi_vio_msg *msg = xfer->priv;
+
+ if (msg) {
+ msg_fetch_notification(msg->input, msg->rx_len, max_len, xfer);
+ xfer->priv = NULL;
+ }
+}
+
+static const struct scmi_transport_ops scmi_virtio_ops = {
+ .link_supplier = virtio_link_supplier,
+ .chan_available = virtio_chan_available,
+ .chan_setup = virtio_chan_setup,
+ .chan_free = virtio_chan_free,
+ .get_max_msg = virtio_get_max_msg,
+ .send_message = virtio_send_message,
+ .fetch_response = virtio_fetch_response,
+ .fetch_notification = virtio_fetch_notification,
+};
+
+static int scmi_vio_probe(struct virtio_device *vdev)
+{
+ struct device *dev = &vdev->dev;
+ struct scmi_vio_channel *channels;
+ bool have_vq_rx;
+ int vq_cnt;
+ int i;
+ int ret;
+ struct virtqueue *vqs[VIRTIO_SCMI_VQ_MAX_CNT];
+
+ /* Only one SCMI VirtiO device allowed */
+ if (scmi_vdev)
+ return -EINVAL;
+
+ have_vq_rx = scmi_vio_have_vq_rx(vdev);
+ vq_cnt = have_vq_rx ? VIRTIO_SCMI_VQ_MAX_CNT : 1;
+
+ channels = devm_kcalloc(dev, vq_cnt, sizeof(*channels), GFP_KERNEL);
+ if (!channels)
+ return -ENOMEM;
+
+ if (have_vq_rx)
+ channels[VIRTIO_SCMI_VQ_RX].is_rx = true;
+
+ ret = virtio_find_vqs(vdev, vq_cnt, vqs, scmi_vio_complete_callbacks,
+ scmi_vio_vqueue_names, NULL);
+ if (ret) {
+ dev_err(dev, "Failed to get %d virtqueue(s)\n", vq_cnt);
+ return ret;
+ }
+
+ for (i = 0; i < vq_cnt; i++) {
+ unsigned int sz;
+
+ spin_lock_init(&channels[i].lock);
+ spin_lock_init(&channels[i].ready_lock);
+ INIT_LIST_HEAD(&channels[i].free_list);
+ channels[i].vqueue = vqs[i];
+
+ sz = virtqueue_get_vring_size(channels[i].vqueue);
+ /* Tx messages need multiple descriptors. */
+ if (!channels[i].is_rx)
+ sz /= DESCRIPTORS_PER_TX_MSG;
+
+ if (sz > MSG_TOKEN_MAX) {
+ dev_info_once(dev,
+ "%s virtqueue could hold %d messages. Only %ld allowed to be pending.\n",
+ channels[i].is_rx ? "rx" : "tx",
+ sz, MSG_TOKEN_MAX);
+ sz = MSG_TOKEN_MAX;
+ }
+ channels[i].max_msg = sz;
+ }
+
+ vdev->priv = channels;
+ scmi_vdev = vdev;
+
+ return 0;
+}
+
+static void scmi_vio_remove(struct virtio_device *vdev)
+{
+ vdev->config->reset(vdev);
+ vdev->config->del_vqs(vdev);
+ scmi_vdev = NULL;
+}
+
+static int scmi_vio_validate(struct virtio_device *vdev)
+{
+ if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1)) {
+ dev_err(&vdev->dev,
+ "device does not comply with spec version 1.x\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned int features[] = {
+ VIRTIO_SCMI_F_P2A_CHANNELS,
+};
+
+static const struct virtio_device_id id_table[] = {
+ { VIRTIO_ID_SCMI, VIRTIO_DEV_ANY_ID },
+ { 0 }
+};
+
+static struct virtio_driver virtio_scmi_driver = {
+ .driver.name = "scmi-virtio",
+ .driver.owner = THIS_MODULE,
+ .feature_table = features,
+ .feature_table_size = ARRAY_SIZE(features),
+ .id_table = id_table,
+ .probe = scmi_vio_probe,
+ .remove = scmi_vio_remove,
+ .validate = scmi_vio_validate,
+};
+
+static int __init virtio_scmi_init(void)
+{
+ return register_virtio_driver(&virtio_scmi_driver);
+}
+
+static void __exit virtio_scmi_exit(void)
+{
+ unregister_virtio_driver(&virtio_scmi_driver);
+}
+
+const struct scmi_desc scmi_virtio_desc = {
+ .transport_init = virtio_scmi_init,
+ .transport_exit = virtio_scmi_exit,
+ .ops = &scmi_virtio_ops,
+ .max_rx_timeout_ms = 60000, /* for non-realtime virtio devices */
+ .max_msg = 0, /* overridden by virtio_get_max_msg() */
+ .max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE,
+};
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 47ea2bd42b10..ced1964faf42 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -71,7 +71,7 @@ static struct qcom_scm_wb_entry qcom_scm_wb[] = {
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
};
-static const char *qcom_scm_convention_names[] = {
+static const char * const qcom_scm_convention_names[] = {
[SMC_CONVENTION_UNKNOWN] = "unknown",
[SMC_CONVENTION_ARM_32] = "smc arm 32",
[SMC_CONVENTION_ARM_64] = "smc arm 64",
@@ -331,7 +331,7 @@ int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
.owner = ARM_SMCCC_OWNER_SIP,
};
- if (!cpus || (cpus && cpumask_empty(cpus)))
+ if (!cpus || cpumask_empty(cpus))
return -EINVAL;
for_each_cpu(cpu, cpus) {
@@ -1299,6 +1299,7 @@ static const struct of_device_id qcom_scm_dt_match[] = {
{ .compatible = "qcom,scm" },
{}
};
+MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
static struct platform_driver qcom_scm_driver = {
.driver = {
@@ -1315,3 +1316,6 @@ static int __init qcom_scm_init(void)
return platform_driver_register(&qcom_scm_driver);
}
subsys_initcall(qcom_scm_init);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/tegra/bpmp-debugfs.c b/drivers/firmware/tegra/bpmp-debugfs.c
index 440d99c63638..3e9fa4b54358 100644
--- a/drivers/firmware/tegra/bpmp-debugfs.c
+++ b/drivers/firmware/tegra/bpmp-debugfs.c
@@ -296,25 +296,61 @@ static int bpmp_debug_show(struct seq_file *m, void *p)
struct file *file = m->private;
struct inode *inode = file_inode(file);
struct tegra_bpmp *bpmp = inode->i_private;
- char *databuf = NULL;
char fnamebuf[256];
const char *filename;
- uint32_t nbytes = 0;
- size_t len;
- int err;
-
- len = seq_get_buf(m, &databuf);
- if (!databuf)
- return -ENOMEM;
+ struct mrq_debug_request req = {
+ .cmd = cpu_to_le32(CMD_DEBUG_READ),
+ };
+ struct mrq_debug_response resp;
+ struct tegra_bpmp_message msg = {
+ .mrq = MRQ_DEBUG,
+ .tx = {
+ .data = &req,
+ .size = sizeof(req),
+ },
+ .rx = {
+ .data = &resp,
+ .size = sizeof(resp),
+ },
+ };
+ uint32_t fd = 0, len = 0;
+ int remaining, err;
filename = get_filename(bpmp, file, fnamebuf, sizeof(fnamebuf));
if (!filename)
return -ENOENT;
- err = mrq_debug_read(bpmp, filename, databuf, len, &nbytes);
- if (!err)
- seq_commit(m, nbytes);
+ mutex_lock(&bpmp_debug_lock);
+ err = mrq_debug_open(bpmp, filename, &fd, &len, 0);
+ if (err)
+ goto out;
+
+ req.frd.fd = fd;
+ remaining = len;
+
+ while (remaining > 0) {
+ err = tegra_bpmp_transfer(bpmp, &msg);
+ if (err < 0) {
+ goto close;
+ } else if (msg.rx.ret < 0) {
+ err = -EINVAL;
+ goto close;
+ }
+ if (resp.frd.readlen > remaining) {
+ pr_err("%s: read data length invalid\n", __func__);
+ err = -EINVAL;
+ goto close;
+ }
+
+ seq_write(m, resp.frd.data, resp.frd.readlen);
+ remaining -= resp.frd.readlen;
+ }
+
+close:
+ err = mrq_debug_close(bpmp, fd);
+out:
+ mutex_unlock(&bpmp_debug_lock);
return err;
}
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 07b7c25cbed8..f61516c17589 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -253,6 +253,7 @@ config SPAPR_TCE_IOMMU
config ARM_SMMU
tristate "ARM Ltd. System MMU (SMMU) Support"
depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64)
+ depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
select IOMMU_API
select IOMMU_IO_PGTABLE_LPAE
select ARM_DMA_USE_IOMMU if ARM
@@ -382,6 +383,7 @@ config QCOM_IOMMU
# Note: iommu drivers cannot (yet?) be built as modules
bool "Qualcomm IOMMU Support"
depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64)
+ depends on QCOM_SCM=y
select IOMMU_API
select IOMMU_IO_PGTABLE_LPAE
select ARM_DMA_USE_IOMMU
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index f80c2ea39ca4..be0858bff4d3 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -9,6 +9,7 @@
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*/
+#include <linux/cpu_pm.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -232,7 +233,10 @@ struct gpmc_device {
int irq;
struct irq_chip irq_chip;
struct gpio_chip gpio_chip;
+ struct notifier_block nb;
+ struct omap3_gpmc_regs context;
int nirqs;
+ unsigned int is_suspended:1;
};
static struct irq_domain *gpmc_irq_domain;
@@ -2384,6 +2388,106 @@ static int gpmc_gpio_init(struct gpmc_device *gpmc)
return 0;
}
+static void omap3_gpmc_save_context(struct gpmc_device *gpmc)
+{
+ struct omap3_gpmc_regs *gpmc_context;
+ int i;
+
+ if (!gpmc || !gpmc_base)
+ return;
+
+ gpmc_context = &gpmc->context;
+
+ gpmc_context->sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
+ gpmc_context->irqenable = gpmc_read_reg(GPMC_IRQENABLE);
+ gpmc_context->timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
+ gpmc_context->config = gpmc_read_reg(GPMC_CONFIG);
+ gpmc_context->prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
+ gpmc_context->prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
+ gpmc_context->prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
+ for (i = 0; i < gpmc_cs_num; i++) {
+ gpmc_context->cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
+ if (gpmc_context->cs_context[i].is_valid) {
+ gpmc_context->cs_context[i].config1 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
+ gpmc_context->cs_context[i].config2 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
+ gpmc_context->cs_context[i].config3 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
+ gpmc_context->cs_context[i].config4 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
+ gpmc_context->cs_context[i].config5 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
+ gpmc_context->cs_context[i].config6 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
+ gpmc_context->cs_context[i].config7 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
+ }
+ }
+}
+
+static void omap3_gpmc_restore_context(struct gpmc_device *gpmc)
+{
+ struct omap3_gpmc_regs *gpmc_context;
+ int i;
+
+ if (!gpmc || !gpmc_base)
+ return;
+
+ gpmc_context = &gpmc->context;
+
+ gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context->sysconfig);
+ gpmc_write_reg(GPMC_IRQENABLE, gpmc_context->irqenable);
+ gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context->timeout_ctrl);
+ gpmc_write_reg(GPMC_CONFIG, gpmc_context->config);
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context->prefetch_config1);
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context->prefetch_config2);
+ gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context->prefetch_control);
+ for (i = 0; i < gpmc_cs_num; i++) {
+ if (gpmc_context->cs_context[i].is_valid) {
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
+ gpmc_context->cs_context[i].config1);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
+ gpmc_context->cs_context[i].config2);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
+ gpmc_context->cs_context[i].config3);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
+ gpmc_context->cs_context[i].config4);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
+ gpmc_context->cs_context[i].config5);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
+ gpmc_context->cs_context[i].config6);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
+ gpmc_context->cs_context[i].config7);
+ } else {
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG7, 0);
+ }
+ }
+}
+
+static int omap_gpmc_context_notifier(struct notifier_block *nb,
+ unsigned long cmd, void *v)
+{
+ struct gpmc_device *gpmc;
+
+ gpmc = container_of(nb, struct gpmc_device, nb);
+ if (gpmc->is_suspended || pm_runtime_suspended(gpmc->dev))
+ return NOTIFY_OK;
+
+ switch (cmd) {
+ case CPU_CLUSTER_PM_ENTER:
+ omap3_gpmc_save_context(gpmc);
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED: /* No need to restore context */
+ break;
+ case CPU_CLUSTER_PM_EXIT:
+ omap3_gpmc_restore_context(gpmc);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
static int gpmc_probe(struct platform_device *pdev)
{
int rc;
@@ -2472,6 +2576,9 @@ static int gpmc_probe(struct platform_device *pdev)
gpmc_probe_dt_children(pdev);
+ gpmc->nb.notifier_call = omap_gpmc_context_notifier;
+ cpu_pm_register_notifier(&gpmc->nb);
+
return 0;
gpio_init_failed:
@@ -2486,6 +2593,7 @@ static int gpmc_remove(struct platform_device *pdev)
{
struct gpmc_device *gpmc = platform_get_drvdata(pdev);
+ cpu_pm_unregister_notifier(&gpmc->nb);
gpmc_free_irq(gpmc);
gpmc_mem_exit();
pm_runtime_put_sync(&pdev->dev);
@@ -2497,15 +2605,23 @@ static int gpmc_remove(struct platform_device *pdev)
#ifdef CONFIG_PM_SLEEP
static int gpmc_suspend(struct device *dev)
{
- omap3_gpmc_save_context();
+ struct gpmc_device *gpmc = dev_get_drvdata(dev);
+
+ omap3_gpmc_save_context(gpmc);
pm_runtime_put_sync(dev);
+ gpmc->is_suspended = 1;
+
return 0;
}
static int gpmc_resume(struct device *dev)
{
+ struct gpmc_device *gpmc = dev_get_drvdata(dev);
+
pm_runtime_get_sync(dev);
- omap3_gpmc_restore_context();
+ omap3_gpmc_restore_context(gpmc);
+ gpmc->is_suspended = 0;
+
return 0;
}
#endif
@@ -2527,74 +2643,3 @@ static __init int gpmc_init(void)
return platform_driver_register(&gpmc_driver);
}
postcore_initcall(gpmc_init);
-
-static struct omap3_gpmc_regs gpmc_context;
-
-void omap3_gpmc_save_context(void)
-{
- int i;
-
- if (!gpmc_base)
- return;
-
- gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
- gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
- gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
- gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
- gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
- gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
- gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
- for (i = 0; i < gpmc_cs_num; i++) {
- gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
- if (gpmc_context.cs_context[i].is_valid) {
- gpmc_context.cs_context[i].config1 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
- gpmc_context.cs_context[i].config2 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
- gpmc_context.cs_context[i].config3 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
- gpmc_context.cs_context[i].config4 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
- gpmc_context.cs_context[i].config5 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
- gpmc_context.cs_context[i].config6 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
- gpmc_context.cs_context[i].config7 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
- }
- }
-}
-
-void omap3_gpmc_restore_context(void)
-{
- int i;
-
- if (!gpmc_base)
- return;
-
- gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
- gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
- gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
- gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
- gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
- for (i = 0; i < gpmc_cs_num; i++) {
- if (gpmc_context.cs_context[i].is_valid) {
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
- gpmc_context.cs_context[i].config1);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
- gpmc_context.cs_context[i].config2);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
- gpmc_context.cs_context[i].config3);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
- gpmc_context.cs_context[i].config4);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
- gpmc_context.cs_context[i].config5);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
- gpmc_context.cs_context[i].config6);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
- gpmc_context.cs_context[i].config7);
- }
- }
-}
diff --git a/drivers/memory/tegra/tegra186.c b/drivers/memory/tegra/tegra186.c
index e65eac5764d4..3d153881abc1 100644
--- a/drivers/memory/tegra/tegra186.c
+++ b/drivers/memory/tegra/tegra186.c
@@ -71,6 +71,7 @@ static int tegra186_mc_resume(struct tegra_mc *mc)
return 0;
}
+#if IS_ENABLED(CONFIG_IOMMU_API)
static void tegra186_mc_client_sid_override(struct tegra_mc *mc,
const struct tegra_mc_client *client,
unsigned int sid)
@@ -108,6 +109,7 @@ static void tegra186_mc_client_sid_override(struct tegra_mc *mc,
writel(sid, mc->regs + client->regs.sid.override);
}
}
+#endif
static int tegra186_mc_probe_device(struct tegra_mc *mc, struct device *dev)
{
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 40f91bc8514d..741289e385d5 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -44,6 +44,7 @@ config ATH10K_SNOC
tristate "Qualcomm ath10k SNOC support"
depends on ATH10K
depends on ARCH_QCOM || COMPILE_TEST
+ depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
select QCOM_QMI_HELPERS
help
This module adds support for integrated WCN3990 chip connected
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 5656cac04b4c..be799a5abf8a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -181,6 +181,13 @@ config RESET_RASPBERRYPI
interfacing with RPi4's co-processor and model these firmware
initialization routines as reset lines.
+config RESET_RZG2L_USBPHY_CTRL
+ tristate "Renesas RZ/G2L USBPHY control driver"
+ depends on ARCH_R9A07G044 || COMPILE_TEST
+ help
+ Support for USBPHY Control found on RZ/G2L family. It mainly
+ controls reset and power down of the USB/PHY.
+
config RESET_SCMI
tristate "Reset driver controlled via ARM SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
@@ -207,7 +214,6 @@ config RESET_SIMPLE
- Realtek SoCs
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- - ZTE's zx2967 family
- SiFive FU740 SoCs
config RESET_SOCFPGA
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index ea8b8d9ca565..21d46d8869ff 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
+obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
diff --git a/drivers/reset/reset-qcom-pdc.c b/drivers/reset/reset-qcom-pdc.c
index ab74bccd4a5b..f22bb49a4ac8 100644
--- a/drivers/reset/reset-qcom-pdc.c
+++ b/drivers/reset/reset-qcom-pdc.c
@@ -11,18 +11,26 @@
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
-#define RPMH_PDC_SYNC_RESET 0x100
+#define RPMH_SDM845_PDC_SYNC_RESET 0x100
+#define RPMH_SC7280_PDC_SYNC_RESET 0x1000
struct qcom_pdc_reset_map {
u8 bit;
};
+struct qcom_pdc_reset_desc {
+ const struct qcom_pdc_reset_map *resets;
+ size_t num_resets;
+ unsigned int offset;
+};
+
struct qcom_pdc_reset_data {
struct reset_controller_dev rcdev;
struct regmap *regmap;
+ const struct qcom_pdc_reset_desc *desc;
};
-static const struct regmap_config sdm845_pdc_regmap_config = {
+static const struct regmap_config pdc_regmap_config = {
.name = "pdc-reset",
.reg_bits = 32,
.reg_stride = 4,
@@ -44,6 +52,33 @@ static const struct qcom_pdc_reset_map sdm845_pdc_resets[] = {
[PDC_MODEM_SYNC_RESET] = {9},
};
+static const struct qcom_pdc_reset_desc sdm845_pdc_reset_desc = {
+ .resets = sdm845_pdc_resets,
+ .num_resets = ARRAY_SIZE(sdm845_pdc_resets),
+ .offset = RPMH_SDM845_PDC_SYNC_RESET,
+};
+
+static const struct qcom_pdc_reset_map sc7280_pdc_resets[] = {
+ [PDC_APPS_SYNC_RESET] = {0},
+ [PDC_SP_SYNC_RESET] = {1},
+ [PDC_AUDIO_SYNC_RESET] = {2},
+ [PDC_SENSORS_SYNC_RESET] = {3},
+ [PDC_AOP_SYNC_RESET] = {4},
+ [PDC_DEBUG_SYNC_RESET] = {5},
+ [PDC_GPU_SYNC_RESET] = {6},
+ [PDC_DISPLAY_SYNC_RESET] = {7},
+ [PDC_COMPUTE_SYNC_RESET] = {8},
+ [PDC_MODEM_SYNC_RESET] = {9},
+ [PDC_WLAN_RF_SYNC_RESET] = {10},
+ [PDC_WPSS_SYNC_RESET] = {11},
+};
+
+static const struct qcom_pdc_reset_desc sc7280_pdc_reset_desc = {
+ .resets = sc7280_pdc_resets,
+ .num_resets = ARRAY_SIZE(sc7280_pdc_resets),
+ .offset = RPMH_SC7280_PDC_SYNC_RESET,
+};
+
static inline struct qcom_pdc_reset_data *to_qcom_pdc_reset_data(
struct reset_controller_dev *rcdev)
{
@@ -54,19 +89,18 @@ static int qcom_pdc_control_assert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
+ u32 mask = BIT(data->desc->resets[idx].bit);
- return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET,
- BIT(sdm845_pdc_resets[idx].bit),
- BIT(sdm845_pdc_resets[idx].bit));
+ return regmap_update_bits(data->regmap, data->desc->offset, mask, mask);
}
static int qcom_pdc_control_deassert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
+ u32 mask = BIT(data->desc->resets[idx].bit);
- return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET,
- BIT(sdm845_pdc_resets[idx].bit), 0);
+ return regmap_update_bits(data->regmap, data->desc->offset, mask, 0);
}
static const struct reset_control_ops qcom_pdc_reset_ops = {
@@ -76,22 +110,27 @@ static const struct reset_control_ops qcom_pdc_reset_ops = {
static int qcom_pdc_reset_probe(struct platform_device *pdev)
{
+ const struct qcom_pdc_reset_desc *desc;
struct qcom_pdc_reset_data *data;
struct device *dev = &pdev->dev;
void __iomem *base;
struct resource *res;
+ desc = device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
+ data->desc = desc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
- data->regmap = devm_regmap_init_mmio(dev, base,
- &sdm845_pdc_regmap_config);
+ data->regmap = devm_regmap_init_mmio(dev, base, &pdc_regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(dev, "Unable to initialize regmap\n");
return PTR_ERR(data->regmap);
@@ -99,14 +138,15 @@ static int qcom_pdc_reset_probe(struct platform_device *pdev)
data->rcdev.owner = THIS_MODULE;
data->rcdev.ops = &qcom_pdc_reset_ops;
- data->rcdev.nr_resets = ARRAY_SIZE(sdm845_pdc_resets);
+ data->rcdev.nr_resets = desc->num_resets;
data->rcdev.of_node = dev->of_node;
return devm_reset_controller_register(dev, &data->rcdev);
}
static const struct of_device_id qcom_pdc_reset_of_match[] = {
- { .compatible = "qcom,sdm845-pdc-global" },
+ { .compatible = "qcom,sc7280-pdc-global", .data = &sc7280_pdc_reset_desc },
+ { .compatible = "qcom,sdm845-pdc-global", .data = &sdm845_pdc_reset_desc },
{}
};
MODULE_DEVICE_TABLE(of, qcom_pdc_reset_of_match);
diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
new file mode 100644
index 000000000000..e0704fd2b533
--- /dev/null
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L USBPHY control driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/reset-controller.h>
+
+#define RESET 0x000
+
+#define RESET_SEL_PLLRESET BIT(12)
+#define RESET_PLLRESET BIT(8)
+
+#define RESET_SEL_P2RESET BIT(5)
+#define RESET_SEL_P1RESET BIT(4)
+#define RESET_PHYRST_2 BIT(1)
+#define RESET_PHYRST_1 BIT(0)
+
+#define PHY_RESET_PORT2 (RESET_SEL_P2RESET | RESET_PHYRST_2)
+#define PHY_RESET_PORT1 (RESET_SEL_P1RESET | RESET_PHYRST_1)
+
+#define NUM_PORTS 2
+
+struct rzg2l_usbphy_ctrl_priv {
+ struct reset_controller_dev rcdev;
+ struct reset_control *rstc;
+ void __iomem *base;
+
+ spinlock_t lock;
+};
+
+#define rcdev_to_priv(x) container_of(x, struct rzg2l_usbphy_ctrl_priv, rcdev)
+
+static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
+ u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2;
+ void __iomem *base = priv->base;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ val = readl(base + RESET);
+ val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
+ if (port_mask == (val & port_mask))
+ val |= RESET_PLLRESET;
+ writel(val, base + RESET);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
+ void __iomem *base = priv->base;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ val = readl(base + RESET);
+
+ val |= RESET_SEL_PLLRESET;
+ val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1));
+ writel(val, base + RESET);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
+ u32 port_mask;
+
+ port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
+
+ return !!(readl(priv->base + RESET) & port_mask);
+}
+
+static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = {
+ { .compatible = "renesas,rzg2l-usbphy-ctrl" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table);
+
+static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = {
+ .assert = rzg2l_usbphy_ctrl_assert,
+ .deassert = rzg2l_usbphy_ctrl_deassert,
+ .status = rzg2l_usbphy_ctrl_status,
+};
+
+static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rzg2l_usbphy_ctrl_priv *priv;
+ unsigned long flags;
+ int error;
+ u32 val;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(priv->rstc))
+ return dev_err_probe(dev, PTR_ERR(priv->rstc),
+ "failed to get reset\n");
+
+ reset_control_deassert(priv->rstc);
+
+ priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops;
+ priv->rcdev.of_reset_n_cells = 1;
+ priv->rcdev.nr_resets = NUM_PORTS;
+ priv->rcdev.of_node = dev->of_node;
+ priv->rcdev.dev = dev;
+
+ error = devm_reset_controller_register(dev, &priv->rcdev);
+ if (error)
+ return error;
+
+ spin_lock_init(&priv->lock);
+ dev_set_drvdata(dev, priv);
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_resume_and_get(&pdev->dev);
+
+ /* put pll and phy into reset state */
+ spin_lock_irqsave(&priv->lock, flags);
+ val = readl(priv->base + RESET);
+ val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 | PHY_RESET_PORT1;
+ writel(val, priv->base + RESET);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int rzg2l_usbphy_ctrl_remove(struct platform_device *pdev)
+{
+ struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev);
+
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ reset_control_assert(priv->rstc);
+
+ return 0;
+}
+
+static struct platform_driver rzg2l_usbphy_ctrl_driver = {
+ .driver = {
+ .name = "rzg2l_usbphy_ctrl",
+ .of_match_table = rzg2l_usbphy_ctrl_match_table,
+ },
+ .probe = rzg2l_usbphy_ctrl_probe,
+ .remove = rzg2l_usbphy_ctrl_remove,
+};
+module_platform_driver(rzg2l_usbphy_ctrl_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control");
+MODULE_AUTHOR("biju.das.jz@bp.renesas.com>");
diff --git a/drivers/soc/mediatek/mt8173-pm-domains.h b/drivers/soc/mediatek/mt8173-pm-domains.h
index 654c717e5467..714fa92575df 100644
--- a/drivers/soc/mediatek/mt8173-pm-domains.h
+++ b/drivers/soc/mediatek/mt8173-pm-domains.h
@@ -71,6 +71,7 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8173[] = {
.ctl_offs = SPM_MFG_ASYNC_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = 0,
+ .caps = MTK_SCPD_DOMAIN_SUPPLY,
},
[MT8173_POWER_DOMAIN_MFG_2D] = {
.name = "mfg_2d",
diff --git a/drivers/soc/mediatek/mt8183-mmsys.h b/drivers/soc/mediatek/mt8183-mmsys.h
index 579dfc8dc8fc..9dee485807c9 100644
--- a/drivers/soc/mediatek/mt8183-mmsys.h
+++ b/drivers/soc/mediatek/mt8183-mmsys.h
@@ -28,25 +28,32 @@
static const struct mtk_mmsys_routes mmsys_mt8183_routing_table[] = {
{
DDP_COMPONENT_OVL0, DDP_COMPONENT_OVL_2L0,
- MT8183_DISP_OVL0_MOUT_EN, MT8183_OVL0_MOUT_EN_OVL0_2L
+ MT8183_DISP_OVL0_MOUT_EN, MT8183_OVL0_MOUT_EN_OVL0_2L,
+ MT8183_OVL0_MOUT_EN_OVL0_2L
}, {
DDP_COMPONENT_OVL_2L0, DDP_COMPONENT_RDMA0,
- MT8183_DISP_OVL0_2L_MOUT_EN, MT8183_OVL0_2L_MOUT_EN_DISP_PATH0
+ MT8183_DISP_OVL0_2L_MOUT_EN, MT8183_OVL0_2L_MOUT_EN_DISP_PATH0,
+ MT8183_OVL0_2L_MOUT_EN_DISP_PATH0
}, {
DDP_COMPONENT_OVL_2L1, DDP_COMPONENT_RDMA1,
- MT8183_DISP_OVL1_2L_MOUT_EN, MT8183_OVL1_2L_MOUT_EN_RDMA1
+ MT8183_DISP_OVL1_2L_MOUT_EN, MT8183_OVL1_2L_MOUT_EN_RDMA1,
+ MT8183_OVL1_2L_MOUT_EN_RDMA1
}, {
DDP_COMPONENT_DITHER, DDP_COMPONENT_DSI0,
- MT8183_DISP_DITHER0_MOUT_EN, MT8183_DITHER0_MOUT_IN_DSI0
+ MT8183_DISP_DITHER0_MOUT_EN, MT8183_DITHER0_MOUT_IN_DSI0,
+ MT8183_DITHER0_MOUT_IN_DSI0
}, {
DDP_COMPONENT_OVL_2L0, DDP_COMPONENT_RDMA0,
- MT8183_DISP_PATH0_SEL_IN, MT8183_DISP_PATH0_SEL_IN_OVL0_2L
+ MT8183_DISP_PATH0_SEL_IN, MT8183_DISP_PATH0_SEL_IN_OVL0_2L,
+ MT8183_DISP_PATH0_SEL_IN_OVL0_2L
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI0,
- MT8183_DISP_DPI0_SEL_IN, MT8183_DPI0_SEL_IN_RDMA1
+ MT8183_DISP_DPI0_SEL_IN, MT8183_DPI0_SEL_IN_RDMA1,
+ MT8183_DPI0_SEL_IN_RDMA1
}, {
DDP_COMPONENT_RDMA0, DDP_COMPONENT_COLOR0,
- MT8183_DISP_RDMA0_SOUT_SEL_IN, MT8183_RDMA0_SOUT_COLOR0
+ MT8183_DISP_RDMA0_SOUT_SEL_IN, MT8183_RDMA0_SOUT_COLOR0,
+ MT8183_RDMA0_SOUT_COLOR0
}
};
diff --git a/drivers/soc/mediatek/mt8365-mmsys.h b/drivers/soc/mediatek/mt8365-mmsys.h
new file mode 100644
index 000000000000..690e3fe2dee0
--- /dev/null
+++ b/drivers/soc/mediatek/mt8365-mmsys.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_MEDIATEK_MT8365_MMSYS_H
+#define __SOC_MEDIATEK_MT8365_MMSYS_H
+
+#define MT8365_DISP_REG_CONFIG_DISP_OVL0_MOUT_EN 0xf3c
+#define MT8365_DISP_REG_CONFIG_DISP_RDMA0_SOUT_SEL 0xf4c
+#define MT8365_DISP_REG_CONFIG_DISP_DITHER0_MOUT_EN 0xf50
+#define MT8365_DISP_REG_CONFIG_DISP_RDMA0_SEL_IN 0xf54
+#define MT8365_DISP_REG_CONFIG_DISP_RDMA0_RSZ0_SEL_IN 0xf60
+#define MT8365_DISP_REG_CONFIG_DISP_COLOR0_SEL_IN 0xf64
+#define MT8365_DISP_REG_CONFIG_DISP_DSI0_SEL_IN 0xf68
+
+#define MT8365_RDMA0_SOUT_COLOR0 0x1
+#define MT8365_DITHER_MOUT_EN_DSI0 0x1
+#define MT8365_DSI0_SEL_IN_DITHER 0x1
+#define MT8365_RDMA0_SEL_IN_OVL0 0x0
+#define MT8365_RDMA0_RSZ0_SEL_IN_RDMA0 0x0
+#define MT8365_DISP_COLOR_SEL_IN_COLOR0 0x0
+#define MT8365_OVL0_MOUT_PATH0_SEL BIT(0)
+
+static const struct mtk_mmsys_routes mt8365_mmsys_routing_table[] = {
+ {
+ DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
+ MT8365_DISP_REG_CONFIG_DISP_OVL0_MOUT_EN,
+ MT8365_OVL0_MOUT_PATH0_SEL, MT8365_OVL0_MOUT_PATH0_SEL
+ },
+ {
+ DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
+ MT8365_DISP_REG_CONFIG_DISP_RDMA0_SEL_IN,
+ MT8365_RDMA0_SEL_IN_OVL0, MT8365_RDMA0_SEL_IN_OVL0
+ },
+ {
+ DDP_COMPONENT_RDMA0, DDP_COMPONENT_COLOR0,
+ MT8365_DISP_REG_CONFIG_DISP_RDMA0_SOUT_SEL,
+ MT8365_RDMA0_SOUT_COLOR0, MT8365_RDMA0_SOUT_COLOR0
+ },
+ {
+ DDP_COMPONENT_COLOR0, DDP_COMPONENT_CCORR,
+ MT8365_DISP_REG_CONFIG_DISP_COLOR0_SEL_IN,
+ MT8365_DISP_COLOR_SEL_IN_COLOR0,MT8365_DISP_COLOR_SEL_IN_COLOR0
+ },
+ {
+ DDP_COMPONENT_DITHER, DDP_COMPONENT_DSI0,
+ MT8365_DISP_REG_CONFIG_DISP_DITHER0_MOUT_EN,
+ MT8365_DITHER_MOUT_EN_DSI0, MT8365_DITHER_MOUT_EN_DSI0
+ },
+ {
+ DDP_COMPONENT_DITHER, DDP_COMPONENT_DSI0,
+ MT8365_DISP_REG_CONFIG_DISP_DSI0_SEL_IN,
+ MT8365_DSI0_SEL_IN_DITHER, MT8365_DSI0_SEL_IN_DITHER
+ },
+ {
+ DDP_COMPONENT_RDMA0, DDP_COMPONENT_COLOR0,
+ MT8365_DISP_REG_CONFIG_DISP_RDMA0_RSZ0_SEL_IN,
+ MT8365_RDMA0_RSZ0_SEL_IN_RDMA0, MT8365_RDMA0_RSZ0_SEL_IN_RDMA0
+ },
+};
+
+#endif /* __SOC_MEDIATEK_MT8365_MMSYS_H */
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 080660ef11bf..a78e88f27b62 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -13,6 +13,7 @@
#include "mtk-mmsys.h"
#include "mt8167-mmsys.h"
#include "mt8183-mmsys.h"
+#include "mt8365-mmsys.h"
static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
.clk_driver = "clk-mt2701-mm",
@@ -52,6 +53,12 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
.num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
};
+static const struct mtk_mmsys_driver_data mt8365_mmsys_driver_data = {
+ .clk_driver = "clk-mt8365-mm",
+ .routes = mt8365_mmsys_routing_table,
+ .num_routes = ARRAY_SIZE(mt8365_mmsys_routing_table),
+};
+
struct mtk_mmsys {
void __iomem *regs;
const struct mtk_mmsys_driver_data *data;
@@ -68,7 +75,9 @@ void mtk_mmsys_ddp_connect(struct device *dev,
for (i = 0; i < mmsys->data->num_routes; i++)
if (cur == routes[i].from_comp && next == routes[i].to_comp) {
- reg = readl_relaxed(mmsys->regs + routes[i].addr) | routes[i].val;
+ reg = readl_relaxed(mmsys->regs + routes[i].addr);
+ reg &= ~routes[i].mask;
+ reg |= routes[i].val;
writel_relaxed(reg, mmsys->regs + routes[i].addr);
}
}
@@ -85,7 +94,8 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
for (i = 0; i < mmsys->data->num_routes; i++)
if (cur == routes[i].from_comp && next == routes[i].to_comp) {
- reg = readl_relaxed(mmsys->regs + routes[i].addr) & ~routes[i].val;
+ reg = readl_relaxed(mmsys->regs + routes[i].addr);
+ reg &= ~routes[i].mask;
writel_relaxed(reg, mmsys->regs + routes[i].addr);
}
}
@@ -157,6 +167,10 @@ static const struct of_device_id of_match_mtk_mmsys[] = {
.compatible = "mediatek,mt8183-mmsys",
.data = &mt8183_mmsys_driver_data,
},
+ {
+ .compatible = "mediatek,mt8365-mmsys",
+ .data = &mt8365_mmsys_driver_data,
+ },
{ }
};
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index a760a34e6eca..9e2b81bd38db 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -35,41 +35,54 @@
#define RDMA0_SOUT_DSI1 0x1
#define RDMA0_SOUT_DSI2 0x4
#define RDMA0_SOUT_DSI3 0x5
+#define RDMA0_SOUT_MASK 0x7
#define RDMA1_SOUT_DPI0 0x2
#define RDMA1_SOUT_DPI1 0x3
#define RDMA1_SOUT_DSI1 0x1
#define RDMA1_SOUT_DSI2 0x4
#define RDMA1_SOUT_DSI3 0x5
+#define RDMA1_SOUT_MASK 0x7
#define RDMA2_SOUT_DPI0 0x2
#define RDMA2_SOUT_DPI1 0x3
#define RDMA2_SOUT_DSI1 0x1
#define RDMA2_SOUT_DSI2 0x4
#define RDMA2_SOUT_DSI3 0x5
+#define RDMA2_SOUT_MASK 0x7
#define DPI0_SEL_IN_RDMA1 0x1
#define DPI0_SEL_IN_RDMA2 0x3
+#define DPI0_SEL_IN_MASK 0x3
#define DPI1_SEL_IN_RDMA1 (0x1 << 8)
#define DPI1_SEL_IN_RDMA2 (0x3 << 8)
+#define DPI1_SEL_IN_MASK (0x3 << 8)
#define DSI0_SEL_IN_RDMA1 0x1
#define DSI0_SEL_IN_RDMA2 0x4
+#define DSI0_SEL_IN_MASK 0x7
#define DSI1_SEL_IN_RDMA1 0x1
#define DSI1_SEL_IN_RDMA2 0x4
+#define DSI1_SEL_IN_MASK 0x7
#define DSI2_SEL_IN_RDMA1 (0x1 << 16)
#define DSI2_SEL_IN_RDMA2 (0x4 << 16)
+#define DSI2_SEL_IN_MASK (0x7 << 16)
#define DSI3_SEL_IN_RDMA1 (0x1 << 16)
#define DSI3_SEL_IN_RDMA2 (0x4 << 16)
+#define DSI3_SEL_IN_MASK (0x7 << 16)
#define COLOR1_SEL_IN_OVL1 0x1
#define OVL_MOUT_EN_RDMA 0x1
#define BLS_TO_DSI_RDMA1_TO_DPI1 0x8
#define BLS_TO_DPI_RDMA1_TO_DSI 0x2
+#define BLS_RDMA1_DSI_DPI_MASK 0xf
#define DSI_SEL_IN_BLS 0x0
#define DPI_SEL_IN_BLS 0x0
+#define DPI_SEL_IN_MASK 0x1
#define DSI_SEL_IN_RDMA 0x1
+#define DSI_SEL_IN_MASK 0x1
struct mtk_mmsys_routes {
u32 from_comp;
u32 to_comp;
u32 addr;
+ u32 mask;
u32 val;
};
@@ -91,124 +104,168 @@ struct mtk_mmsys_driver_data {
static const struct mtk_mmsys_routes mmsys_default_routing_table[] = {
{
DDP_COMPONENT_BLS, DDP_COMPONENT_DSI0,
- DISP_REG_CONFIG_OUT_SEL, BLS_TO_DSI_RDMA1_TO_DPI1
+ DISP_REG_CONFIG_OUT_SEL, BLS_RDMA1_DSI_DPI_MASK,
+ BLS_TO_DSI_RDMA1_TO_DPI1
}, {
DDP_COMPONENT_BLS, DDP_COMPONENT_DSI0,
- DISP_REG_CONFIG_DSI_SEL, DSI_SEL_IN_BLS
+ DISP_REG_CONFIG_DSI_SEL, DSI_SEL_IN_MASK,
+ DSI_SEL_IN_BLS
}, {
DDP_COMPONENT_BLS, DDP_COMPONENT_DPI0,
- DISP_REG_CONFIG_OUT_SEL, BLS_TO_DPI_RDMA1_TO_DSI
+ DISP_REG_CONFIG_OUT_SEL, BLS_RDMA1_DSI_DPI_MASK,
+ BLS_TO_DPI_RDMA1_TO_DSI
}, {
DDP_COMPONENT_BLS, DDP_COMPONENT_DPI0,
- DISP_REG_CONFIG_DSI_SEL, DSI_SEL_IN_RDMA
+ DISP_REG_CONFIG_DSI_SEL, DSI_SEL_IN_MASK,
+ DSI_SEL_IN_RDMA
}, {
DDP_COMPONENT_BLS, DDP_COMPONENT_DPI0,
- DISP_REG_CONFIG_DPI_SEL, DPI_SEL_IN_BLS
+ DISP_REG_CONFIG_DPI_SEL, DPI_SEL_IN_MASK,
+ DPI_SEL_IN_BLS
}, {
DDP_COMPONENT_GAMMA, DDP_COMPONENT_RDMA1,
- DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN, GAMMA_MOUT_EN_RDMA1
+ DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN, GAMMA_MOUT_EN_RDMA1,
+ GAMMA_MOUT_EN_RDMA1
}, {
DDP_COMPONENT_OD0, DDP_COMPONENT_RDMA0,
- DISP_REG_CONFIG_DISP_OD_MOUT_EN, OD_MOUT_EN_RDMA0
+ DISP_REG_CONFIG_DISP_OD_MOUT_EN, OD_MOUT_EN_RDMA0,
+ OD_MOUT_EN_RDMA0
}, {
DDP_COMPONENT_OD1, DDP_COMPONENT_RDMA1,
- DISP_REG_CONFIG_DISP_OD_MOUT_EN, OD1_MOUT_EN_RDMA1
+ DISP_REG_CONFIG_DISP_OD_MOUT_EN, OD1_MOUT_EN_RDMA1,
+ OD1_MOUT_EN_RDMA1
}, {
DDP_COMPONENT_OVL0, DDP_COMPONENT_COLOR0,
- DISP_REG_CONFIG_DISP_OVL0_MOUT_EN, OVL0_MOUT_EN_COLOR0
+ DISP_REG_CONFIG_DISP_OVL0_MOUT_EN, OVL0_MOUT_EN_COLOR0,
+ OVL0_MOUT_EN_COLOR0
}, {
DDP_COMPONENT_OVL0, DDP_COMPONENT_COLOR0,
- DISP_REG_CONFIG_DISP_COLOR0_SEL_IN, COLOR0_SEL_IN_OVL0
+ DISP_REG_CONFIG_DISP_COLOR0_SEL_IN, COLOR0_SEL_IN_OVL0,
+ COLOR0_SEL_IN_OVL0
}, {
DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
- DISP_REG_CONFIG_DISP_OVL_MOUT_EN, OVL_MOUT_EN_RDMA
+ DISP_REG_CONFIG_DISP_OVL_MOUT_EN, OVL_MOUT_EN_RDMA,
+ OVL_MOUT_EN_RDMA
}, {
DDP_COMPONENT_OVL1, DDP_COMPONENT_COLOR1,
- DISP_REG_CONFIG_DISP_OVL1_MOUT_EN, OVL1_MOUT_EN_COLOR1
+ DISP_REG_CONFIG_DISP_OVL1_MOUT_EN, OVL1_MOUT_EN_COLOR1,
+ OVL1_MOUT_EN_COLOR1
}, {
DDP_COMPONENT_OVL1, DDP_COMPONENT_COLOR1,
- DISP_REG_CONFIG_DISP_COLOR1_SEL_IN, COLOR1_SEL_IN_OVL1
+ DISP_REG_CONFIG_DISP_COLOR1_SEL_IN, COLOR1_SEL_IN_OVL1,
+ COLOR1_SEL_IN_OVL1
}, {
DDP_COMPONENT_RDMA0, DDP_COMPONENT_DPI0,
- DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_DPI0
+ DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_MASK,
+ RDMA0_SOUT_DPI0
}, {
DDP_COMPONENT_RDMA0, DDP_COMPONENT_DPI1,
- DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_DPI1
+ DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_MASK,
+ RDMA0_SOUT_DPI1
}, {
DDP_COMPONENT_RDMA0, DDP_COMPONENT_DSI1,
- DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_DSI1
+ DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_MASK,
+ RDMA0_SOUT_DSI1
}, {
DDP_COMPONENT_RDMA0, DDP_COMPONENT_DSI2,
- DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_DSI2
+ DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_MASK,
+ RDMA0_SOUT_DSI2
}, {
DDP_COMPONENT_RDMA0, DDP_COMPONENT_DSI3,
- DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_DSI3
+ DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN, RDMA0_SOUT_MASK,
+ RDMA0_SOUT_DSI3
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI0,
- DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_DPI0
+ DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_MASK,
+ RDMA1_SOUT_DPI0
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI0,
- DISP_REG_CONFIG_DPI_SEL_IN, DPI0_SEL_IN_RDMA1
+ DISP_REG_CONFIG_DPI_SEL_IN, DPI0_SEL_IN_MASK,
+ DPI0_SEL_IN_RDMA1
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI1,
- DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_DPI1
+ DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_MASK,
+ RDMA1_SOUT_DPI1
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI1,
- DISP_REG_CONFIG_DPI_SEL_IN, DPI1_SEL_IN_RDMA1
+ DISP_REG_CONFIG_DPI_SEL_IN, DPI1_SEL_IN_MASK,
+ DPI1_SEL_IN_RDMA1
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI0,
- DISP_REG_CONFIG_DSIE_SEL_IN, DSI0_SEL_IN_RDMA1
+ DISP_REG_CONFIG_DSIE_SEL_IN, DSI0_SEL_IN_MASK,
+ DSI0_SEL_IN_RDMA1
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI1,
- DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_DSI1
+ DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_MASK,
+ RDMA1_SOUT_DSI1
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI1,
- DISP_REG_CONFIG_DSIO_SEL_IN, DSI1_SEL_IN_RDMA1
+ DISP_REG_CONFIG_DSIO_SEL_IN, DSI1_SEL_IN_MASK,
+ DSI1_SEL_IN_RDMA1
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI2,
- DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_DSI2
+ DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_MASK,
+ RDMA1_SOUT_DSI2
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI2,
- DISP_REG_CONFIG_DSIE_SEL_IN, DSI2_SEL_IN_RDMA1
+ DISP_REG_CONFIG_DSIE_SEL_IN, DSI2_SEL_IN_MASK,
+ DSI2_SEL_IN_RDMA1
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI3,
- DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_DSI3
+ DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN, RDMA1_SOUT_MASK,
+ RDMA1_SOUT_DSI3
}, {
DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI3,
- DISP_REG_CONFIG_DSIO_SEL_IN, DSI3_SEL_IN_RDMA1
+ DISP_REG_CONFIG_DSIO_SEL_IN, DSI3_SEL_IN_MASK,
+ DSI3_SEL_IN_RDMA1
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DPI0,
- DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_DPI0
+ DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_MASK,
+ RDMA2_SOUT_DPI0
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DPI0,
- DISP_REG_CONFIG_DPI_SEL_IN, DPI0_SEL_IN_RDMA2
+ DISP_REG_CONFIG_DPI_SEL_IN, DPI0_SEL_IN_MASK,
+ DPI0_SEL_IN_RDMA2
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DPI1,
- DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_DPI1
+ DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_MASK,
+ RDMA2_SOUT_DPI1
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DPI1,
- DISP_REG_CONFIG_DPI_SEL_IN, DPI1_SEL_IN_RDMA2
+ DISP_REG_CONFIG_DPI_SEL_IN, DPI1_SEL_IN_MASK,
+ DPI1_SEL_IN_RDMA2
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI0,
- DISP_REG_CONFIG_DSIE_SEL_IN, DSI0_SEL_IN_RDMA2
+ DISP_REG_CONFIG_DSIE_SEL_IN, DSI0_SEL_IN_MASK,
+ DSI0_SEL_IN_RDMA2
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI1,
- DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_DSI1
+ DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_MASK,
+ RDMA2_SOUT_DSI1
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI1,
- DISP_REG_CONFIG_DSIO_SEL_IN, DSI1_SEL_IN_RDMA2
+ DISP_REG_CONFIG_DSIO_SEL_IN, DSI1_SEL_IN_MASK,
+ DSI1_SEL_IN_RDMA2
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI2,
- DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_DSI2
+ DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_MASK,
+ RDMA2_SOUT_DSI2
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI2,
- DISP_REG_CONFIG_DSIE_SEL_IN, DSI2_SEL_IN_RDMA2
+ DISP_REG_CONFIG_DSIE_SEL_IN, DSI2_SEL_IN_MASK,
+ DSI2_SEL_IN_RDMA2
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI3,
- DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_DSI3
+ DISP_REG_CONFIG_DISP_RDMA2_SOUT, RDMA2_SOUT_MASK,
+ RDMA2_SOUT_DSI3
}, {
DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI3,
- DISP_REG_CONFIG_DSIO_SEL_IN, DSI3_SEL_IN_RDMA2
+ DISP_REG_CONFIG_DSIO_SEL_IN, DSI3_SEL_IN_MASK,
+ DSI3_SEL_IN_RDMA2
+ }, {
+ DDP_COMPONENT_UFOE, DDP_COMPONENT_DSI0,
+ DISP_REG_CONFIG_DISP_UFOE_MOUT_EN, UFOE_MOUT_EN_DSI0,
+ UFOE_MOUT_EN_DSI0
}
};
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index 21a4e113bbec..c5ac649ae51b 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -60,7 +60,7 @@
#define BUS_PROT_UPDATE_TOPAXI(_mask) \
BUS_PROT_UPDATE(_mask, \
INFRA_TOPAXI_PROTECTEN, \
- INFRA_TOPAXI_PROTECTEN_CLR, \
+ INFRA_TOPAXI_PROTECTEN, \
INFRA_TOPAXI_PROTECTSTA1)
struct scpsys_bus_prot_data {
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index b24cc77d1889..4ce8e816154f 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -801,38 +801,6 @@ unlock:
return ret;
}
-static int cpr_read_efuse(struct device *dev, const char *cname, u32 *data)
-{
- struct nvmem_cell *cell;
- ssize_t len;
- char *ret;
- int i;
-
- *data = 0;
-
- cell = nvmem_cell_get(dev, cname);
- if (IS_ERR(cell)) {
- if (PTR_ERR(cell) != -EPROBE_DEFER)
- dev_err(dev, "undefined cell %s\n", cname);
- return PTR_ERR(cell);
- }
-
- ret = nvmem_cell_read(cell, &len);
- nvmem_cell_put(cell);
- if (IS_ERR(ret)) {
- dev_err(dev, "can't read cell %s\n", cname);
- return PTR_ERR(ret);
- }
-
- for (i = 0; i < len; i++)
- *data |= ret[i] << (8 * i);
-
- kfree(ret);
- dev_dbg(dev, "efuse read(%s) = %x, bytes %zd\n", cname, *data, len);
-
- return 0;
-}
-
static int
cpr_populate_ring_osc_idx(struct cpr_drv *drv)
{
@@ -843,8 +811,7 @@ cpr_populate_ring_osc_idx(struct cpr_drv *drv)
int ret;
for (; fuse < end; fuse++, fuses++) {
- ret = cpr_read_efuse(drv->dev, fuses->ring_osc,
- &data);
+ ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->ring_osc, &data);
if (ret)
return ret;
fuse->ring_osc_idx = data;
@@ -863,7 +830,7 @@ static int cpr_read_fuse_uV(const struct cpr_desc *desc,
u32 bits = 0;
int ret;
- ret = cpr_read_efuse(drv->dev, init_v_efuse, &bits);
+ ret = nvmem_cell_read_variable_le_u32(drv->dev, init_v_efuse, &bits);
if (ret)
return ret;
@@ -932,7 +899,7 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
}
/* Populate target quotient by scaling */
- ret = cpr_read_efuse(drv->dev, fuses->quotient, &fuse->quot);
+ ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->quotient, &fuse->quot);
if (ret)
return ret;
@@ -1001,7 +968,7 @@ static int cpr_calculate_scaling(const char *quot_offset,
prev_fuse = fuse - 1;
if (quot_offset) {
- ret = cpr_read_efuse(drv->dev, quot_offset, &quot_diff);
+ ret = nvmem_cell_read_variable_le_u32(drv->dev, quot_offset, &quot_diff);
if (ret)
return ret;
@@ -1701,7 +1668,7 @@ static int cpr_probe(struct platform_device *pdev)
* initialized after attaching to the power domain,
* since it depends on the CPU's OPP table.
*/
- ret = cpr_read_efuse(dev, "cpr_fuse_revision", &cpr_rev);
+ ret = nvmem_cell_read_variable_le_u32(dev, "cpr_fuse_revision", &cpr_rev);
if (ret)
return ret;
diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index eba7f76f9d61..bda170d7b4a2 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -166,6 +166,8 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
metadata = qcom_mdt_read_metadata(fw, &metadata_len);
if (IS_ERR(metadata)) {
ret = PTR_ERR(metadata);
+ dev_err(dev, "error %d reading firmware %s metadata\n",
+ ret, fw_name);
goto out;
}
@@ -173,7 +175,9 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
kfree(metadata);
if (ret) {
- dev_err(dev, "invalid firmware metadata\n");
+ /* Invalid firmware metadata */
+ dev_err(dev, "error %d initializing firmware %s\n",
+ ret, fw_name);
goto out;
}
}
@@ -199,7 +203,9 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
ret = qcom_scm_pas_mem_setup(pas_id, mem_phys,
max_addr - min_addr);
if (ret) {
- dev_err(dev, "unable to setup relocation\n");
+ /* Unable to set up relocation */
+ dev_err(dev, "error %d setting up firmware %s\n",
+ ret, fw_name);
goto out;
}
}
@@ -243,9 +249,8 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
if (phdr->p_filesz && phdr->p_offset < fw->size) {
/* Firmware is large enough to be non-split */
if (phdr->p_offset + phdr->p_filesz > fw->size) {
- dev_err(dev,
- "failed to load segment %d from truncated file %s\n",
- i, firmware);
+ dev_err(dev, "file %s segment %d would be truncated\n",
+ fw_name, i);
ret = -EINVAL;
break;
}
@@ -257,7 +262,8 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
ret = request_firmware_into_buf(&seg_fw, fw_name, dev,
ptr, phdr->p_filesz);
if (ret) {
- dev_err(dev, "failed to load %s\n", fw_name);
+ dev_err(dev, "error %d loading %s\n",
+ ret, fw_name);
break;
}
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 5bdfb1565c14..7d649d2cf31e 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -104,7 +104,6 @@ static const char * const icc_path_names[] = {"qup-core", "qup-config",
#define GENI_OUTPUT_CTRL 0x24
#define GENI_CGC_CTRL 0x28
#define GENI_CLK_CTRL_RO 0x60
-#define GENI_IF_DISABLE_RO 0x64
#define GENI_FW_S_REVISION_RO 0x6c
#define SE_GENI_BYTE_GRAN 0x254
#define SE_GENI_TX_PACKING_CFG0 0x260
@@ -322,6 +321,30 @@ static void geni_se_select_dma_mode(struct geni_se *se)
writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
}
+static void geni_se_select_gpi_mode(struct geni_se *se)
+{
+ u32 val;
+
+ geni_se_irq_clear(se);
+
+ writel(0, se->base + SE_IRQ_EN);
+
+ val = readl(se->base + SE_GENI_S_IRQ_EN);
+ val &= ~S_CMD_DONE_EN;
+ writel(val, se->base + SE_GENI_S_IRQ_EN);
+
+ val = readl(se->base + SE_GENI_M_IRQ_EN);
+ val &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN |
+ M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
+ writel(val, se->base + SE_GENI_M_IRQ_EN);
+
+ writel(GENI_DMA_MODE_EN, se->base + SE_GENI_DMA_MODE_EN);
+
+ val = readl(se->base + SE_GSI_EVENT_EN);
+ val |= (DMA_RX_EVENT_EN | DMA_TX_EVENT_EN | GENI_M_EVENT_EN | GENI_S_EVENT_EN);
+ writel(val, se->base + SE_GSI_EVENT_EN);
+}
+
/**
* geni_se_select_mode() - Select the serial engine transfer mode
* @se: Pointer to the concerned serial engine.
@@ -329,7 +352,7 @@ static void geni_se_select_dma_mode(struct geni_se *se)
*/
void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
{
- WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA);
+ WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA && mode != GENI_GPI_DMA);
switch (mode) {
case GENI_SE_FIFO:
@@ -338,6 +361,9 @@ void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
case GENI_SE_DMA:
geni_se_select_dma_mode(se);
break;
+ case GENI_GPI_DMA:
+ geni_se_select_gpi_mode(se);
+ break;
case GENI_SE_INVALID:
default:
break;
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 934fcc4d2b05..536c3e4114fb 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -476,12 +476,12 @@ static int qmp_cooling_device_add(struct qmp *qmp,
static int qmp_cooling_devices_register(struct qmp *qmp)
{
struct device_node *np, *child;
- int count = QMP_NUM_COOLING_RESOURCES;
+ int count = 0;
int ret;
np = qmp->dev->of_node;
- qmp->cooling_devs = devm_kcalloc(qmp->dev, count,
+ qmp->cooling_devs = devm_kcalloc(qmp->dev, QMP_NUM_COOLING_RESOURCES,
sizeof(*qmp->cooling_devs),
GFP_KERNEL);
@@ -497,12 +497,16 @@ static int qmp_cooling_devices_register(struct qmp *qmp)
goto unroll;
}
+ if (!count)
+ devm_kfree(qmp->dev, qmp->cooling_devs);
+
return 0;
unroll:
while (--count >= 0)
thermal_cooling_device_unregister
(qmp->cooling_devs[count].cdev);
+ devm_kfree(qmp->dev, qmp->cooling_devs);
return ret;
}
@@ -602,6 +606,7 @@ static const struct of_device_id qmp_dt_match[] = {
{ .compatible = "qcom,sm8150-aoss-qmp", },
{ .compatible = "qcom,sm8250-aoss-qmp", },
{ .compatible = "qcom,sm8350-aoss-qmp", },
+ { .compatible = "qcom,aoss-qmp", },
{}
};
MODULE_DEVICE_TABLE(of, qmp_dt_match);
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index 2daa17ba54a3..fa209b479ab3 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -403,12 +403,11 @@ static int rpmhpd_power_on(struct generic_pm_domain *domain)
static int rpmhpd_power_off(struct generic_pm_domain *domain)
{
struct rpmhpd *pd = domain_to_rpmhpd(domain);
- int ret = 0;
+ int ret;
mutex_lock(&rpmhpd_lock);
- ret = rpmhpd_aggregate_corner(pd, pd->level[0]);
-
+ ret = rpmhpd_aggregate_corner(pd, 0);
if (!ret)
pd->enabled = false;
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index 0b532a892d60..dbf494e92574 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -346,6 +346,33 @@ static const struct rpmpd_desc sdm660_desc = {
.max_state = RPM_SMD_LEVEL_TURBO,
};
+/* sm4250/6115 RPM Power domains */
+DEFINE_RPMPD_PAIR(sm6115, vddcx, vddcx_ao, RWCX, LEVEL, 0);
+DEFINE_RPMPD_VFL(sm6115, vddcx_vfl, RWCX, 0);
+
+DEFINE_RPMPD_PAIR(sm6115, vddmx, vddmx_ao, RWMX, LEVEL, 0);
+DEFINE_RPMPD_VFL(sm6115, vddmx_vfl, RWMX, 0);
+
+DEFINE_RPMPD_LEVEL(sm6115, vdd_lpi_cx, RWLC, 0);
+DEFINE_RPMPD_LEVEL(sm6115, vdd_lpi_mx, RWLM, 0);
+
+static struct rpmpd *sm6115_rpmpds[] = {
+ [SM6115_VDDCX] = &sm6115_vddcx,
+ [SM6115_VDDCX_AO] = &sm6115_vddcx_ao,
+ [SM6115_VDDCX_VFL] = &sm6115_vddcx_vfl,
+ [SM6115_VDDMX] = &sm6115_vddmx,
+ [SM6115_VDDMX_AO] = &sm6115_vddmx_ao,
+ [SM6115_VDDMX_VFL] = &sm6115_vddmx_vfl,
+ [SM6115_VDD_LPI_CX] = &sm6115_vdd_lpi_cx,
+ [SM6115_VDD_LPI_MX] = &sm6115_vdd_lpi_mx,
+};
+
+static const struct rpmpd_desc sm6115_desc = {
+ .rpmpds = sm6115_rpmpds,
+ .num_pds = ARRAY_SIZE(sm6115_rpmpds),
+ .max_state = RPM_SMD_LEVEL_TURBO_NO_CPR,
+};
+
static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,mdm9607-rpmpd", .data = &mdm9607_desc },
{ .compatible = "qcom,msm8916-rpmpd", .data = &msm8916_desc },
@@ -356,6 +383,7 @@ static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,msm8998-rpmpd", .data = &msm8998_desc },
{ .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc },
{ .compatible = "qcom,sdm660-rpmpd", .data = &sdm660_desc },
+ { .compatible = "qcom,sm6115-rpmpd", .data = &sm6115_desc },
{ }
};
MODULE_DEVICE_TABLE(of, rpmpd_match_table);
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index bc0be1d4be5f..dfdd4f20f5fd 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -242,6 +242,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = {
{ .compatible = "qcom,rpm-msm8996" },
{ .compatible = "qcom,rpm-msm8998" },
{ .compatible = "qcom,rpm-sdm660" },
+ { .compatible = "qcom,rpm-sm6115" },
{ .compatible = "qcom,rpm-sm6125" },
{ .compatible = "qcom,rpm-qcs404" },
{}
diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
index 1d3d5e3ec2b0..ef15d014c03a 100644
--- a/drivers/soc/qcom/smsm.c
+++ b/drivers/soc/qcom/smsm.c
@@ -109,7 +109,7 @@ struct smsm_entry {
DECLARE_BITMAP(irq_enabled, 32);
DECLARE_BITMAP(irq_rising, 32);
DECLARE_BITMAP(irq_falling, 32);
- u32 last_value;
+ unsigned long last_value;
u32 *remote_state;
u32 *subscription;
@@ -204,8 +204,7 @@ static irqreturn_t smsm_intr(int irq, void *data)
u32 val;
val = readl(entry->remote_state);
- changed = val ^ entry->last_value;
- entry->last_value = val;
+ changed = val ^ xchg(&entry->last_value, val);
for_each_set_bit(i, entry->irq_enabled, 32) {
if (!(changed & BIT(i)))
@@ -264,6 +263,12 @@ static void smsm_unmask_irq(struct irq_data *irqd)
struct qcom_smsm *smsm = entry->smsm;
u32 val;
+ /* Make sure our last cached state is up-to-date */
+ if (readl(entry->remote_state) & BIT(irq))
+ set_bit(irq, &entry->last_value);
+ else
+ clear_bit(irq, &entry->last_value);
+
set_bit(irq, entry->irq_enabled);
if (entry->subscription) {
@@ -299,11 +304,28 @@ static int smsm_set_irq_type(struct irq_data *irqd, unsigned int type)
return 0;
}
+static int smsm_get_irqchip_state(struct irq_data *irqd,
+ enum irqchip_irq_state which, bool *state)
+{
+ struct smsm_entry *entry = irq_data_get_irq_chip_data(irqd);
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
+ u32 val;
+
+ if (which != IRQCHIP_STATE_LINE_LEVEL)
+ return -EINVAL;
+
+ val = readl(entry->remote_state);
+ *state = !!(val & BIT(irq));
+
+ return 0;
+}
+
static struct irq_chip smsm_irq_chip = {
.name = "smsm",
.irq_mask = smsm_mask_irq,
.irq_unmask = smsm_unmask_irq,
.irq_set_type = smsm_set_irq_type,
+ .irq_get_irqchip_state = smsm_get_irqchip_state,
};
/**
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index b2f049faa3df..9faf48302f4b 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -417,8 +417,8 @@ QCOM_OPEN(chip_id, qcom_show_chip_id);
static int show_image_##type(struct seq_file *seq, void *p) \
{ \
struct smem_image_version *image_version = seq->private; \
- seq_puts(seq, image_version->type); \
- seq_putc(seq, '\n'); \
+ if (image_version->type[0] != '\0') \
+ seq_printf(seq, "%s\n", image_version->type); \
return 0; \
} \
static int open_image_##type(struct inode *inode, struct file *file) \
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 71b44c31b012..07e0ecd64319 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -208,6 +208,7 @@ config ARCH_R8A77951
help
This enables support for the Renesas R-Car H3 SoC (revisions 2.0 and
later).
+ This includes different gradings like R-Car H3e-2G.
config ARCH_R8A77965
bool "ARM64 Platform support for R-Car M3-N"
@@ -229,6 +230,7 @@ config ARCH_R8A77961
select SYSC_R8A77961
help
This enables support for the Renesas R-Car M3-W+ SoC.
+ This includes different gradings like R-Car M3e-2G.
config ARCH_R8A77980
bool "ARM64 Platform support for R-Car V3H"
diff --git a/drivers/soc/renesas/r8a779a0-sysc.c b/drivers/soc/renesas/r8a779a0-sysc.c
index d464ffa1be33..7410b9fa9846 100644
--- a/drivers/soc/renesas/r8a779a0-sysc.c
+++ b/drivers/soc/renesas/r8a779a0-sysc.c
@@ -404,19 +404,21 @@ static int __init r8a779a0_sysc_pd_init(void)
for (i = 0; i < info->num_areas; i++) {
const struct r8a779a0_sysc_area *area = &info->areas[i];
struct r8a779a0_sysc_pd *pd;
+ size_t n;
if (!area->name) {
/* Skip NULLified area */
continue;
}
- pd = kzalloc(sizeof(*pd) + strlen(area->name) + 1, GFP_KERNEL);
+ n = strlen(area->name) + 1;
+ pd = kzalloc(sizeof(*pd) + n, GFP_KERNEL);
if (!pd) {
error = -ENOMEM;
goto out_put;
}
- strcpy(pd->name, area->name);
+ memcpy(pd->name, area->name, n);
pd->genpd.name = pd->name;
pd->pdr = area->pdr;
pd->flags = area->flags;
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 53387a72ca00..b0a80de34c98 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -396,19 +396,21 @@ static int __init rcar_sysc_pd_init(void)
for (i = 0; i < info->num_areas; i++) {
const struct rcar_sysc_area *area = &info->areas[i];
struct rcar_sysc_pd *pd;
+ size_t n;
if (!area->name) {
/* Skip NULLified area */
continue;
}
- pd = kzalloc(sizeof(*pd) + strlen(area->name) + 1, GFP_KERNEL);
+ n = strlen(area->name) + 1;
+ pd = kzalloc(sizeof(*pd) + n, GFP_KERNEL);
if (!pd) {
error = -ENOMEM;
goto out_put;
}
- strcpy(pd->name, area->name);
+ memcpy(pd->name, area->name, n);
pd->genpd.name = pd->name;
pd->ch.chan_offs = area->chan_offs;
pd->ch.chan_bit = area->chan_bit;
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 8310fce7714e..dab9f5a0aad0 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -284,11 +284,15 @@ static const struct of_device_id renesas_socs[] __initconst = {
#if defined(CONFIG_ARCH_R8A77950) || defined(CONFIG_ARCH_R8A77951)
{ .compatible = "renesas,r8a7795", .data = &soc_rcar_h3 },
#endif
+#ifdef CONFIG_ARCH_R8A77951
+ { .compatible = "renesas,r8a779m1", .data = &soc_rcar_h3 },
+#endif
#ifdef CONFIG_ARCH_R8A77960
{ .compatible = "renesas,r8a7796", .data = &soc_rcar_m3_w },
#endif
#ifdef CONFIG_ARCH_R8A77961
{ .compatible = "renesas,r8a77961", .data = &soc_rcar_m3_w },
+ { .compatible = "renesas,r8a779m3", .data = &soc_rcar_m3_w },
#endif
#ifdef CONFIG_ARCH_R8A77965
{ .compatible = "renesas,r8a77965", .data = &soc_rcar_m3_n },
diff --git a/drivers/soc/rockchip/Kconfig b/drivers/soc/rockchip/Kconfig
index 2c13bf4dd5db..25eb2c1e31bb 100644
--- a/drivers/soc/rockchip/Kconfig
+++ b/drivers/soc/rockchip/Kconfig
@@ -6,8 +6,8 @@ if ARCH_ROCKCHIP || COMPILE_TEST
#
config ROCKCHIP_GRF
- bool
- default y
+ bool "Rockchip General Register Files support" if COMPILE_TEST
+ default y if ARCH_ROCKCHIP
help
The General Register Files are a central component providing
special additional settings registers for a lot of soc-components.
diff --git a/drivers/soc/rockchip/io-domain.c b/drivers/soc/rockchip/io-domain.c
index cf8182fc3642..9df513d1219b 100644
--- a/drivers/soc/rockchip/io-domain.c
+++ b/drivers/soc/rockchip/io-domain.c
@@ -51,13 +51,11 @@
#define RK3399_PMUGRF_CON0_VSEL BIT(8)
#define RK3399_PMUGRF_VSEL_SUPPLY_NUM 9
-struct rockchip_iodomain;
+#define RK3568_PMU_GRF_IO_VSEL0 (0x0140)
+#define RK3568_PMU_GRF_IO_VSEL1 (0x0144)
+#define RK3568_PMU_GRF_IO_VSEL2 (0x0148)
-struct rockchip_iodomain_soc_data {
- int grf_offset;
- const char *supply_names[MAX_SUPPLIES];
- void (*init)(struct rockchip_iodomain *iod);
-};
+struct rockchip_iodomain;
struct rockchip_iodomain_supply {
struct rockchip_iodomain *iod;
@@ -66,13 +64,62 @@ struct rockchip_iodomain_supply {
int idx;
};
+struct rockchip_iodomain_soc_data {
+ int grf_offset;
+ const char *supply_names[MAX_SUPPLIES];
+ void (*init)(struct rockchip_iodomain *iod);
+ int (*write)(struct rockchip_iodomain_supply *supply, int uV);
+};
+
struct rockchip_iodomain {
struct device *dev;
struct regmap *grf;
const struct rockchip_iodomain_soc_data *soc_data;
struct rockchip_iodomain_supply supplies[MAX_SUPPLIES];
+ int (*write)(struct rockchip_iodomain_supply *supply, int uV);
};
+static int rk3568_iodomain_write(struct rockchip_iodomain_supply *supply, int uV)
+{
+ struct rockchip_iodomain *iod = supply->iod;
+ u32 is_3v3 = uV > MAX_VOLTAGE_1_8;
+ u32 val0, val1;
+ int b;
+
+ switch (supply->idx) {
+ case 0: /* pmuio1 */
+ break;
+ case 1: /* pmuio2 */
+ b = supply->idx;
+ val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b));
+ b = supply->idx + 4;
+ val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0);
+
+ regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL2, val0);
+ regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL2, val1);
+ break;
+ case 3: /* vccio2 */
+ break;
+ case 2: /* vccio1 */
+ case 4: /* vccio3 */
+ case 5: /* vccio4 */
+ case 6: /* vccio5 */
+ case 7: /* vccio6 */
+ case 8: /* vccio7 */
+ b = supply->idx - 1;
+ val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b));
+ val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0);
+
+ regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL0, val0);
+ regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL1, val1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int rockchip_iodomain_write(struct rockchip_iodomain_supply *supply,
int uV)
{
@@ -136,7 +183,7 @@ static int rockchip_iodomain_notify(struct notifier_block *nb,
return NOTIFY_BAD;
}
- ret = rockchip_iodomain_write(supply, uV);
+ ret = supply->iod->write(supply, uV);
if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
return NOTIFY_BAD;
@@ -398,6 +445,22 @@ static const struct rockchip_iodomain_soc_data soc_data_rk3399_pmu = {
.init = rk3399_pmu_iodomain_init,
};
+static const struct rockchip_iodomain_soc_data soc_data_rk3568_pmu = {
+ .grf_offset = 0x140,
+ .supply_names = {
+ "pmuio1",
+ "pmuio2",
+ "vccio1",
+ "vccio2",
+ "vccio3",
+ "vccio4",
+ "vccio5",
+ "vccio6",
+ "vccio7",
+ },
+ .write = rk3568_iodomain_write,
+};
+
static const struct rockchip_iodomain_soc_data soc_data_rv1108 = {
.grf_offset = 0x404,
.supply_names = {
@@ -470,6 +533,10 @@ static const struct of_device_id rockchip_iodomain_match[] = {
.data = &soc_data_rk3399_pmu
},
{
+ .compatible = "rockchip,rk3568-pmu-io-voltage-domain",
+ .data = &soc_data_rk3568_pmu
+ },
+ {
.compatible = "rockchip,rv1108-io-voltage-domain",
.data = &soc_data_rv1108
},
@@ -502,6 +569,11 @@ static int rockchip_iodomain_probe(struct platform_device *pdev)
match = of_match_node(rockchip_iodomain_match, np);
iod->soc_data = match->data;
+ if (iod->soc_data->write)
+ iod->write = iod->soc_data->write;
+ else
+ iod->write = rockchip_iodomain_write;
+
parent = pdev->dev.parent;
if (parent && parent->of_node) {
iod->grf = syscon_node_to_regmap(parent->of_node);
@@ -562,7 +634,7 @@ static int rockchip_iodomain_probe(struct platform_device *pdev)
supply->reg = reg;
supply->nb.notifier_call = rockchip_iodomain_notify;
- ret = rockchip_iodomain_write(supply, uV);
+ ret = iod->write(supply, uV);
if (ret) {
supply->reg = NULL;
goto unreg_notify;
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index 3d9da3d359da..f2151815db58 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -13,6 +13,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
@@ -210,6 +211,8 @@ static int tegra_fuse_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, fuse);
fuse->dev = &pdev->dev;
+ pm_runtime_enable(&pdev->dev);
+
if (fuse->soc->probe) {
err = fuse->soc->probe(fuse);
if (err < 0)
@@ -246,14 +249,71 @@ static int tegra_fuse_probe(struct platform_device *pdev)
return 0;
restore:
+ fuse->clk = NULL;
fuse->base = base;
+ pm_runtime_disable(&pdev->dev);
return err;
}
+static int __maybe_unused tegra_fuse_runtime_resume(struct device *dev)
+{
+ int err;
+
+ err = clk_prepare_enable(fuse->clk);
+ if (err < 0) {
+ dev_err(dev, "failed to enable FUSE clock: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused tegra_fuse_runtime_suspend(struct device *dev)
+{
+ clk_disable_unprepare(fuse->clk);
+
+ return 0;
+}
+
+static int __maybe_unused tegra_fuse_suspend(struct device *dev)
+{
+ int ret;
+
+ /*
+ * Critical for RAM re-repair operation, which must occur on resume
+ * from LP1 system suspend and as part of CCPLEX cluster switching.
+ */
+ if (fuse->soc->clk_suspend_on)
+ ret = pm_runtime_resume_and_get(dev);
+ else
+ ret = pm_runtime_force_suspend(dev);
+
+ return ret;
+}
+
+static int __maybe_unused tegra_fuse_resume(struct device *dev)
+{
+ int ret = 0;
+
+ if (fuse->soc->clk_suspend_on)
+ pm_runtime_put(dev);
+ else
+ ret = pm_runtime_force_resume(dev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops tegra_fuse_pm = {
+ SET_RUNTIME_PM_OPS(tegra_fuse_runtime_suspend, tegra_fuse_runtime_resume,
+ NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(tegra_fuse_suspend, tegra_fuse_resume)
+};
+
static struct platform_driver tegra_fuse_driver = {
.driver = {
.name = "tegra-fuse",
.of_match_table = tegra_fuse_match,
+ .pm = &tegra_fuse_pm,
.suppress_bind_attrs = true,
},
.probe = tegra_fuse_probe,
diff --git a/drivers/soc/tegra/fuse/fuse-tegra20.c b/drivers/soc/tegra/fuse/fuse-tegra20.c
index 16aaa28573ac..8ec9fc5e5e4b 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra20.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra20.c
@@ -16,6 +16,7 @@
#include <linux/kobject.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/random.h>
#include <soc/tegra/fuse.h>
@@ -46,6 +47,10 @@ static u32 tegra20_fuse_read(struct tegra_fuse *fuse, unsigned int offset)
u32 value = 0;
int err;
+ err = pm_runtime_resume_and_get(fuse->dev);
+ if (err)
+ return err;
+
mutex_lock(&fuse->apbdma.lock);
fuse->apbdma.config.src_addr = fuse->phys + FUSE_BEGIN + offset;
@@ -66,8 +71,6 @@ static u32 tegra20_fuse_read(struct tegra_fuse *fuse, unsigned int offset)
reinit_completion(&fuse->apbdma.wait);
- clk_prepare_enable(fuse->clk);
-
dmaengine_submit(dma_desc);
dma_async_issue_pending(fuse->apbdma.chan);
time_left = wait_for_completion_timeout(&fuse->apbdma.wait,
@@ -78,10 +81,9 @@ static u32 tegra20_fuse_read(struct tegra_fuse *fuse, unsigned int offset)
else
value = *fuse->apbdma.virt;
- clk_disable_unprepare(fuse->clk);
-
out:
mutex_unlock(&fuse->apbdma.lock);
+ pm_runtime_put(fuse->dev);
return value;
}
@@ -165,4 +167,5 @@ const struct tegra_fuse_soc tegra20_fuse_soc = {
.probe = tegra20_fuse_probe,
.info = &tegra20_fuse_info,
.soc_attr_group = &tegra_soc_attr_group,
+ .clk_suspend_on = false,
};
diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index c1aa7815bd6e..b071d433d74f 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -12,6 +12,7 @@
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/random.h>
#include <soc/tegra/fuse.h>
@@ -52,15 +53,13 @@ static u32 tegra30_fuse_read(struct tegra_fuse *fuse, unsigned int offset)
u32 value;
int err;
- err = clk_prepare_enable(fuse->clk);
- if (err < 0) {
- dev_err(fuse->dev, "failed to enable FUSE clock: %d\n", err);
+ err = pm_runtime_resume_and_get(fuse->dev);
+ if (err)
return 0;
- }
value = readl_relaxed(fuse->base + FUSE_BEGIN + offset);
- clk_disable_unprepare(fuse->clk);
+ pm_runtime_put(fuse->dev);
return value;
}
@@ -113,6 +112,7 @@ const struct tegra_fuse_soc tegra30_fuse_soc = {
.speedo_init = tegra30_init_speedo_data,
.info = &tegra30_fuse_info,
.soc_attr_group = &tegra_soc_attr_group,
+ .clk_suspend_on = false,
};
#endif
@@ -128,6 +128,7 @@ const struct tegra_fuse_soc tegra114_fuse_soc = {
.speedo_init = tegra114_init_speedo_data,
.info = &tegra114_fuse_info,
.soc_attr_group = &tegra_soc_attr_group,
+ .clk_suspend_on = false,
};
#endif
@@ -209,6 +210,7 @@ const struct tegra_fuse_soc tegra124_fuse_soc = {
.lookups = tegra124_fuse_lookups,
.num_lookups = ARRAY_SIZE(tegra124_fuse_lookups),
.soc_attr_group = &tegra_soc_attr_group,
+ .clk_suspend_on = true,
};
#endif
@@ -295,6 +297,7 @@ const struct tegra_fuse_soc tegra210_fuse_soc = {
.lookups = tegra210_fuse_lookups,
.num_lookups = ARRAY_SIZE(tegra210_fuse_lookups),
.soc_attr_group = &tegra_soc_attr_group,
+ .clk_suspend_on = false,
};
#endif
@@ -325,6 +328,7 @@ const struct tegra_fuse_soc tegra186_fuse_soc = {
.lookups = tegra186_fuse_lookups,
.num_lookups = ARRAY_SIZE(tegra186_fuse_lookups),
.soc_attr_group = &tegra_soc_attr_group,
+ .clk_suspend_on = false,
};
#endif
@@ -355,6 +359,7 @@ const struct tegra_fuse_soc tegra194_fuse_soc = {
.lookups = tegra194_fuse_lookups,
.num_lookups = ARRAY_SIZE(tegra194_fuse_lookups),
.soc_attr_group = &tegra194_soc_attr_group,
+ .clk_suspend_on = false,
};
#endif
@@ -385,5 +390,6 @@ const struct tegra_fuse_soc tegra234_fuse_soc = {
.lookups = tegra234_fuse_lookups,
.num_lookups = ARRAY_SIZE(tegra234_fuse_lookups),
.soc_attr_group = &tegra194_soc_attr_group,
+ .clk_suspend_on = false,
};
#endif
diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h
index e057a58e2060..de58feba0435 100644
--- a/drivers/soc/tegra/fuse/fuse.h
+++ b/drivers/soc/tegra/fuse/fuse.h
@@ -34,6 +34,8 @@ struct tegra_fuse_soc {
unsigned int num_lookups;
const struct attribute_group *soc_attr_group;
+
+ bool clk_suspend_on;
};
struct tegra_fuse {
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index ea62f84d1c8b..50091c4ec948 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -436,7 +436,7 @@ struct tegra_pmc {
static struct tegra_pmc *pmc = &(struct tegra_pmc) {
.base = NULL,
- .suspend_mode = TEGRA_SUSPEND_NONE,
+ .suspend_mode = TEGRA_SUSPEND_NOT_READY,
};
static inline struct tegra_powergate *
@@ -1812,6 +1812,7 @@ static int tegra_pmc_parse_dt(struct tegra_pmc *pmc, struct device_node *np)
u32 value, values[2];
if (of_property_read_u32(np, "nvidia,suspend-mode", &value)) {
+ pmc->suspend_mode = TEGRA_SUSPEND_NONE;
} else {
switch (value) {
case 0:
@@ -2785,6 +2786,11 @@ static int tegra_pmc_regmap_init(struct tegra_pmc *pmc)
return 0;
}
+static void tegra_pmc_reset_suspend_mode(void *data)
+{
+ pmc->suspend_mode = TEGRA_SUSPEND_NOT_READY;
+}
+
static int tegra_pmc_probe(struct platform_device *pdev)
{
void __iomem *base;
@@ -2803,6 +2809,11 @@ static int tegra_pmc_probe(struct platform_device *pdev)
if (err < 0)
return err;
+ err = devm_add_action_or_reset(&pdev->dev, tegra_pmc_reset_suspend_mode,
+ NULL);
+ if (err)
+ return err;
+
/* take over the memory region from the early initialization */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
@@ -2909,6 +2920,7 @@ static int tegra_pmc_probe(struct platform_device *pdev)
tegra_pmc_clock_register(pmc, pdev->dev.of_node);
platform_set_drvdata(pdev, pmc);
+ tegra_pm_init_suspend();
return 0;
diff --git a/drivers/soc/tegra/powergate-bpmp.c b/drivers/soc/tegra/powergate-bpmp.c
index 06c792bafca5..8eaf50d0b6af 100644
--- a/drivers/soc/tegra/powergate-bpmp.c
+++ b/drivers/soc/tegra/powergate-bpmp.c
@@ -7,7 +7,6 @@
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/slab.h>
-#include <linux/version.h>
#include <soc/tegra/bpmp.h>
#include <soc/tegra/bpmp-abi.h>
diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index f22ac1edbdd0..49da387d7749 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -338,6 +338,7 @@ static const struct of_device_id pruss_of_match[] = {
{ .compatible = "ti,k2g-pruss" },
{ .compatible = "ti,am654-icssg", .data = &am65x_j721e_pruss_data, },
{ .compatible = "ti,j721e-icssg", .data = &am65x_j721e_pruss_data, },
+ { .compatible = "ti,am642-icssg", .data = &am65x_j721e_pruss_data, },
{},
};
MODULE_DEVICE_TABLE(of, pruss_of_match);
diff --git a/drivers/soc/ti/smartreflex.c b/drivers/soc/ti/smartreflex.c
index 06cbee5fd254..b5b2fa538d5c 100644
--- a/drivers/soc/ti/smartreflex.c
+++ b/drivers/soc/ti/smartreflex.c
@@ -126,23 +126,13 @@ static irqreturn_t sr_interrupt(int irq, void *data)
static void sr_set_clk_length(struct omap_sr *sr)
{
- struct clk *fck;
u32 fclk_speed;
/* Try interconnect target module fck first if it already exists */
- fck = clk_get(sr->pdev->dev.parent, "fck");
- if (IS_ERR(fck)) {
- fck = clk_get(&sr->pdev->dev, "fck");
- if (IS_ERR(fck)) {
- dev_err(&sr->pdev->dev,
- "%s: unable to get fck for device %s\n",
- __func__, dev_name(&sr->pdev->dev));
- return;
- }
- }
+ if (IS_ERR(sr->fck))
+ return;
- fclk_speed = clk_get_rate(fck);
- clk_put(fck);
+ fclk_speed = clk_get_rate(sr->fck);
switch (fclk_speed) {
case 12000000:
@@ -587,21 +577,25 @@ int sr_enable(struct omap_sr *sr, unsigned long volt)
/* errminlimit is opp dependent and hence linked to voltage */
sr->err_minlimit = nvalue_row->errminlimit;
- pm_runtime_get_sync(&sr->pdev->dev);
+ clk_enable(sr->fck);
/* Check if SR is already enabled. If yes do nothing */
if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
- return 0;
+ goto out_enabled;
/* Configure SR */
ret = sr_class->configure(sr);
if (ret)
- return ret;
+ goto out_enabled;
sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
/* SRCONFIG - enable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
+
+out_enabled:
+ sr->enabled = 1;
+
return 0;
}
@@ -621,7 +615,7 @@ void sr_disable(struct omap_sr *sr)
}
/* Check if SR clocks are already disabled. If yes do nothing */
- if (pm_runtime_suspended(&sr->pdev->dev))
+ if (!sr->enabled)
return;
/*
@@ -642,7 +636,8 @@ void sr_disable(struct omap_sr *sr)
}
}
- pm_runtime_put_sync_suspend(&sr->pdev->dev);
+ clk_disable(sr->fck);
+ sr->enabled = 0;
}
/**
@@ -851,8 +846,12 @@ static int omap_sr_probe(struct platform_device *pdev)
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ sr_info->fck = devm_clk_get(pdev->dev.parent, "fck");
+ if (IS_ERR(sr_info->fck))
+ return PTR_ERR(sr_info->fck);
+ clk_prepare(sr_info->fck);
+
pm_runtime_enable(&pdev->dev);
- pm_runtime_irq_safe(&pdev->dev);
snprintf(sr_info->name, SMARTREFLEX_NAME_LEN, "%s", pdata->name);
@@ -878,12 +877,6 @@ static int omap_sr_probe(struct platform_device *pdev)
list_add(&sr_info->node, &sr_list);
- ret = pm_runtime_get_sync(&pdev->dev);
- if (ret < 0) {
- pm_runtime_put_noidle(&pdev->dev);
- goto err_list_del;
- }
-
/*
* Call into late init to do initializations that require
* both sr driver and sr class driver to be initiallized.
@@ -933,16 +926,13 @@ static int omap_sr_probe(struct platform_device *pdev)
}
- pm_runtime_put_sync(&pdev->dev);
-
return ret;
err_debugfs:
debugfs_remove_recursive(sr_info->dbg_dir);
err_list_del:
list_del(&sr_info->node);
-
- pm_runtime_put_sync(&pdev->dev);
+ clk_unprepare(sr_info->fck);
return ret;
}
@@ -950,6 +940,7 @@ err_list_del:
static int omap_sr_remove(struct platform_device *pdev)
{
struct omap_sr_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
struct omap_sr *sr_info;
if (!pdata) {
@@ -968,7 +959,8 @@ static int omap_sr_remove(struct platform_device *pdev)
sr_stop_vddautocomp(sr_info);
debugfs_remove_recursive(sr_info->dbg_dir);
- pm_runtime_disable(&pdev->dev);
+ pm_runtime_disable(dev);
+ clk_unprepare(sr_info->fck);
list_del(&sr_info->node);
return 0;
}
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 8d8df51c5466..b2dd0a4d2446 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -77,6 +77,11 @@ struct spi_imx_devtype_data {
bool has_slavemode;
unsigned int fifo_size;
bool dynamic_burst;
+ /*
+ * ERR009165 fixed or not:
+ * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+ */
+ bool tx_glitch_fixed;
enum spi_imx_devtype devtype;
};
@@ -622,8 +627,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
spi_imx->spi_bus_clk = clk;
- if (spi_imx->usedma)
+ /*
+ * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+ * before i.mx6ul.
+ */
+ if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed)
ctrl |= MX51_ECSPI_CTRL_SMC;
+ else
+ ctrl &= ~MX51_ECSPI_CTRL_SMC;
writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
@@ -632,12 +643,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
static void mx51_setup_wml(struct spi_imx_data *spi_imx)
{
+ u32 tx_wml = 0;
+
+ if (spi_imx->devtype_data->tx_glitch_fixed)
+ tx_wml = spi_imx->wml;
/*
* Configure the DMA register: setup the watermark
* and enable DMA request.
*/
writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
- MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+ MX51_ECSPI_DMA_TX_WML(tx_wml) |
MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1028,6 +1043,23 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
.devtype = IMX53_ECSPI,
};
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+ .intctrl = mx51_ecspi_intctrl,
+ .prepare_message = mx51_ecspi_prepare_message,
+ .prepare_transfer = mx51_ecspi_prepare_transfer,
+ .trigger = mx51_ecspi_trigger,
+ .rx_available = mx51_ecspi_rx_available,
+ .reset = mx51_ecspi_reset,
+ .setup_wml = mx51_setup_wml,
+ .fifo_size = 64,
+ .has_dmamode = true,
+ .dynamic_burst = true,
+ .has_slavemode = true,
+ .tx_glitch_fixed = true,
+ .disable = mx51_ecspi_disable,
+ .devtype = IMX51_ECSPI,
+};
+
static const struct of_device_id spi_imx_dt_ids[] = {
{ .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
{ .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
@@ -1036,6 +1068,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+ { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
@@ -1249,10 +1282,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
{
int ret;
- /* use pio mode for i.mx6dl chip TKT238285 */
- if (of_machine_is_compatible("fsl,imx6dl"))
- return 0;
-
spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
/* Prepare for TX DMA: */
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 546dfc1e2349..0bc7046ab942 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -487,6 +487,7 @@ config FTWDT010_WATCHDOG
config IXP4XX_WATCHDOG
tristate "IXP4xx Watchdog"
depends on ARCH_IXP4XX
+ select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
in the Intel IXP4xx network processors. This driver can
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index aae29dcfaf11..2693ffb24ac7 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -1,220 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* drivers/char/watchdog/ixp4xx_wdt.c
*
* Watchdog driver for Intel IXP4xx network processors
*
* Author: Deepak Saxena <dsaxena@plexity.net>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
*
* Copyright 2004 (c) MontaVista, Software, Inc.
* Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/of.h>
#include <linux/watchdog.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/uaccess.h>
-#include <mach/hardware.h>
+#include <linux/bits.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/soc/ixp4xx/cpu.h>
+
+struct ixp4xx_wdt {
+ struct watchdog_device wdd;
+ void __iomem *base;
+ unsigned long rate;
+};
-static bool nowayout = WATCHDOG_NOWAYOUT;
-static int heartbeat = 60; /* (secs) Default is 1 minute */
-static unsigned long wdt_status;
-static unsigned long boot_status;
-static DEFINE_SPINLOCK(wdt_lock);
+/* Fallback if we do not have a clock for this */
+#define IXP4XX_TIMER_FREQ 66666000
-#define WDT_TICK_RATE (IXP4XX_PERIPHERAL_BUS_CLOCK * 1000000UL)
+/* Registers after the timer registers */
+#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */
+#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */
+#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */
+#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */
-#define WDT_IN_USE 0
-#define WDT_OK_TO_CLOSE 1
+#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008
+#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010
+#define IXP4XX_WDT_KEY 0x0000482E
+#define IXP4XX_WDT_RESET_ENABLE 0x00000001
+#define IXP4XX_WDT_IRQ_ENABLE 0x00000002
+#define IXP4XX_WDT_COUNT_ENABLE 0x00000004
-static void wdt_enable(void)
+static inline
+struct ixp4xx_wdt *to_ixp4xx_wdt(struct watchdog_device *wdd)
{
- spin_lock(&wdt_lock);
- *IXP4XX_OSWK = IXP4XX_WDT_KEY;
- *IXP4XX_OSWE = 0;
- *IXP4XX_OSWT = WDT_TICK_RATE * heartbeat;
- *IXP4XX_OSWE = IXP4XX_WDT_COUNT_ENABLE | IXP4XX_WDT_RESET_ENABLE;
- *IXP4XX_OSWK = 0;
- spin_unlock(&wdt_lock);
+ return container_of(wdd, struct ixp4xx_wdt, wdd);
}
-static void wdt_disable(void)
+static int ixp4xx_wdt_start(struct watchdog_device *wdd)
{
- spin_lock(&wdt_lock);
- *IXP4XX_OSWK = IXP4XX_WDT_KEY;
- *IXP4XX_OSWE = 0;
- *IXP4XX_OSWK = 0;
- spin_unlock(&wdt_lock);
-}
+ struct ixp4xx_wdt *iwdt = to_ixp4xx_wdt(wdd);
-static int ixp4xx_wdt_open(struct inode *inode, struct file *file)
-{
- if (test_and_set_bit(WDT_IN_USE, &wdt_status))
- return -EBUSY;
+ __raw_writel(IXP4XX_WDT_KEY, iwdt->base + IXP4XX_OSWK_OFFSET);
+ __raw_writel(0, iwdt->base + IXP4XX_OSWE_OFFSET);
+ __raw_writel(wdd->timeout * iwdt->rate,
+ iwdt->base + IXP4XX_OSWT_OFFSET);
+ __raw_writel(IXP4XX_WDT_COUNT_ENABLE | IXP4XX_WDT_RESET_ENABLE,
+ iwdt->base + IXP4XX_OSWE_OFFSET);
+ __raw_writel(0, iwdt->base + IXP4XX_OSWK_OFFSET);
- clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
- wdt_enable();
- return stream_open(inode, file);
+ return 0;
}
-static ssize_t
-ixp4xx_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static int ixp4xx_wdt_stop(struct watchdog_device *wdd)
{
- if (len) {
- if (!nowayout) {
- size_t i;
-
- clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-
- for (i = 0; i != len; i++) {
- char c;
-
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
- set_bit(WDT_OK_TO_CLOSE, &wdt_status);
- }
- }
- wdt_enable();
- }
- return len;
-}
+ struct ixp4xx_wdt *iwdt = to_ixp4xx_wdt(wdd);
-static const struct watchdog_info ident = {
- .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
- WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
- .identity = "IXP4xx Watchdog",
-};
+ __raw_writel(IXP4XX_WDT_KEY, iwdt->base + IXP4XX_OSWK_OFFSET);
+ __raw_writel(0, iwdt->base + IXP4XX_OSWE_OFFSET);
+ __raw_writel(0, iwdt->base + IXP4XX_OSWK_OFFSET);
-
-static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int ret = -ENOTTY;
- int time;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- ret = copy_to_user((struct watchdog_info *)arg, &ident,
- sizeof(ident)) ? -EFAULT : 0;
- break;
-
- case WDIOC_GETSTATUS:
- ret = put_user(0, (int *)arg);
- break;
-
- case WDIOC_GETBOOTSTATUS:
- ret = put_user(boot_status, (int *)arg);
- break;
-
- case WDIOC_KEEPALIVE:
- wdt_enable();
- ret = 0;
- break;
-
- case WDIOC_SETTIMEOUT:
- ret = get_user(time, (int *)arg);
- if (ret)
- break;
-
- if (time <= 0 || time > 60) {
- ret = -EINVAL;
- break;
- }
-
- heartbeat = time;
- wdt_enable();
- fallthrough;
-
- case WDIOC_GETTIMEOUT:
- ret = put_user(heartbeat, (int *)arg);
- break;
- }
- return ret;
+ return 0;
}
-static int ixp4xx_wdt_release(struct inode *inode, struct file *file)
+static int ixp4xx_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
{
- if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
- wdt_disable();
- else
- pr_crit("Device closed unexpectedly - timer will not stop\n");
- clear_bit(WDT_IN_USE, &wdt_status);
- clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+ wdd->timeout = timeout;
+ if (watchdog_active(wdd))
+ ixp4xx_wdt_start(wdd);
return 0;
}
-
-static const struct file_operations ixp4xx_wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = ixp4xx_wdt_write,
- .unlocked_ioctl = ixp4xx_wdt_ioctl,
- .compat_ioctl = compat_ptr_ioctl,
- .open = ixp4xx_wdt_open,
- .release = ixp4xx_wdt_release,
+static const struct watchdog_ops ixp4xx_wdt_ops = {
+ .start = ixp4xx_wdt_start,
+ .stop = ixp4xx_wdt_stop,
+ .set_timeout = ixp4xx_wdt_set_timeout,
+ .owner = THIS_MODULE,
};
-static struct miscdevice ixp4xx_wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &ixp4xx_wdt_fops,
+static const struct watchdog_info ixp4xx_wdt_info = {
+ .options = WDIOF_KEEPALIVEPING
+ | WDIOF_MAGICCLOSE
+ | WDIOF_SETTIMEOUT,
+ .identity = KBUILD_MODNAME,
};
-static int __init ixp4xx_wdt_init(void)
+/* Devres-handled clock disablement */
+static void ixp4xx_clock_action(void *d)
+{
+ clk_disable_unprepare(d);
+}
+
+static int ixp4xx_wdt_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
+ struct ixp4xx_wdt *iwdt;
+ struct clk *clk;
int ret;
- /*
- * FIXME: we bail out on device tree boot but this really needs
- * to be fixed in a nicer way: this registers the MDIO bus before
- * even matching the driver infrastructure, we should only probe
- * detected hardware.
- */
- if (of_have_populated_dt())
- return -ENODEV;
if (!(read_cpuid_id() & 0xf) && !cpu_is_ixp46x()) {
- pr_err("Rev. A0 IXP42x CPU detected - watchdog disabled\n");
-
+ dev_err(dev, "Rev. A0 IXP42x CPU detected - watchdog disabled\n");
return -ENODEV;
}
- boot_status = (*IXP4XX_OSST & IXP4XX_OSST_TIMER_WARM_RESET) ?
- WDIOF_CARDRESET : 0;
- ret = misc_register(&ixp4xx_wdt_miscdev);
- if (ret == 0)
- pr_info("timer heartbeat %d sec\n", heartbeat);
- return ret;
-}
-static void __exit ixp4xx_wdt_exit(void)
-{
- misc_deregister(&ixp4xx_wdt_miscdev);
-}
+ iwdt = devm_kzalloc(dev, sizeof(*iwdt), GFP_KERNEL);
+ if (!iwdt)
+ return -ENOMEM;
+ iwdt->base = dev->platform_data;
+ /*
+ * Retrieve rate from a fixed clock from the device tree if
+ * the parent has that, else use the default clock rate.
+ */
+ clk = devm_clk_get(dev->parent, NULL);
+ if (!IS_ERR(clk)) {
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ return ret;
+ ret = devm_add_action_or_reset(dev, ixp4xx_clock_action, clk);
+ if (ret)
+ return ret;
+ iwdt->rate = clk_get_rate(clk);
+ }
+ if (!iwdt->rate)
+ iwdt->rate = IXP4XX_TIMER_FREQ;
-module_init(ixp4xx_wdt_init);
-module_exit(ixp4xx_wdt_exit);
+ iwdt->wdd.info = &ixp4xx_wdt_info;
+ iwdt->wdd.ops = &ixp4xx_wdt_ops;
+ iwdt->wdd.min_timeout = 1;
+ iwdt->wdd.max_timeout = U32_MAX / iwdt->rate;
+ iwdt->wdd.parent = dev;
+ /* Default to 60 seconds */
+ iwdt->wdd.timeout = 60U;
+ watchdog_init_timeout(&iwdt->wdd, 0, dev);
-MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
-MODULE_DESCRIPTION("IXP4xx Network Processor Watchdog");
+ if (__raw_readl(iwdt->base + IXP4XX_OSST_OFFSET) &
+ IXP4XX_OSST_TIMER_WARM_RESET)
+ iwdt->wdd.bootstatus = WDIOF_CARDRESET;
+
+ ret = devm_watchdog_register_device(dev, &iwdt->wdd);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "IXP4xx watchdog available\n");
-module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)");
+ return 0;
+}
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+static struct platform_driver ixp4xx_wdt_driver = {
+ .probe = ixp4xx_wdt_probe,
+ .driver = {
+ .name = "ixp4xx-watchdog",
+ },
+};
+module_platform_driver(ixp4xx_wdt_driver);
+MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
+MODULE_DESCRIPTION("IXP4xx Network Processor Watchdog");
MODULE_LICENSE("GPL");
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index 8b5708bb9671..4533dbbf9937 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -192,6 +192,16 @@
#define SDM660_SSCMX 8
#define SDM660_SSCMX_VFL 9
+/* SM6115 Power Domains */
+#define SM6115_VDDCX 0
+#define SM6115_VDDCX_AO 1
+#define SM6115_VDDCX_VFL 2
+#define SM6115_VDDMX 3
+#define SM6115_VDDMX_AO 4
+#define SM6115_VDDMX_VFL 5
+#define SM6115_VDD_LPI_CX 6
+#define SM6115_VDD_LPI_MX 7
+
/* RPM SMD Power Domain performance levels */
#define RPM_SMD_LEVEL_RETENTION 16
#define RPM_SMD_LEVEL_RETENTION_PLUS 32
diff --git a/include/dt-bindings/reset/qcom,sdm845-pdc.h b/include/dt-bindings/reset/qcom,sdm845-pdc.h
index 53c37f9c319a..03a0c0eb8147 100644
--- a/include/dt-bindings/reset/qcom,sdm845-pdc.h
+++ b/include/dt-bindings/reset/qcom,sdm845-pdc.h
@@ -16,5 +16,7 @@
#define PDC_DISPLAY_SYNC_RESET 7
#define PDC_COMPUTE_SYNC_RESET 8
#define PDC_MODEM_SYNC_RESET 9
+#define PDC_WLAN_RF_SYNC_RESET 10
+#define PDC_WPSS_SYNC_RESET 11
#endif
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index b7bf735960c2..082841908fe7 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -81,9 +81,6 @@ extern int gpmc_configure(int cmd, int wval);
extern void gpmc_read_settings_dt(struct device_node *np,
struct gpmc_settings *p);
-extern void omap3_gpmc_save_context(void);
-extern void omap3_gpmc_restore_context(void);
-
struct gpmc_timings;
struct omap_nand_platform_data;
struct omap_onenand_platform_data;
diff --git a/include/linux/platform_data/pata_ixp4xx_cf.h b/include/linux/platform_data/pata_ixp4xx_cf.h
index 601ba97fef57..e60fa41da4a5 100644
--- a/include/linux/platform_data/pata_ixp4xx_cf.h
+++ b/include/linux/platform_data/pata_ixp4xx_cf.h
@@ -14,8 +14,8 @@ struct ixp4xx_pata_data {
volatile u32 *cs1_cfg;
unsigned long cs0_bits;
unsigned long cs1_bits;
- void __iomem *cs0;
- void __iomem *cs1;
+ void __iomem *cmd;
+ void __iomem *ctl;
};
#endif
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index 971c9264179e..167b9b040091 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -155,6 +155,7 @@ struct omap_sr {
struct voltagedomain *voltdm;
struct dentry *dbg_dir;
unsigned int irq;
+ struct clk *fck;
int srid;
int ip_type;
int nvalue_count;
@@ -169,6 +170,7 @@ struct omap_sr {
u32 senp_mod;
u32 senn_mod;
void __iomem *base;
+ unsigned long enabled:1;
};
/**
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 7c811eebcaab..f5672785c0c4 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -8,11 +8,24 @@
#include <linux/interconnect.h>
-/* Transfer mode supported by GENI Serial Engines */
+/**
+ * enum geni_se_xfer_mode: Transfer modes supported by Serial Engines
+ *
+ * @GENI_SE_INVALID: Invalid mode
+ * @GENI_SE_FIFO: FIFO mode. Data is transferred with SE FIFO
+ * by programmed IO method
+ * @GENI_SE_DMA: Serial Engine DMA mode. Data is transferred
+ * with SE by DMAengine internal to SE
+ * @GENI_GPI_DMA: GPI DMA mode. Data is transferred using a DMAengine
+ * configured by a firmware residing on a GSI engine. This DMA name is
+ * interchangeably used as GSI or GPI which seem to imply the same DMAengine
+ */
+
enum geni_se_xfer_mode {
GENI_SE_INVALID,
GENI_SE_FIFO,
GENI_SE_DMA,
+ GENI_GPI_DMA,
};
/* Protocols supported by GENI Serial Engines */
@@ -63,6 +76,7 @@ struct geni_se {
#define SE_GENI_STATUS 0x40
#define GENI_SER_M_CLK_CFG 0x48
#define GENI_SER_S_CLK_CFG 0x4c
+#define GENI_IF_DISABLE_RO 0x64
#define GENI_FW_REVISION_RO 0x68
#define SE_GENI_CLK_SEL 0x7c
#define SE_GENI_DMA_MODE_EN 0x258
@@ -105,6 +119,9 @@ struct geni_se {
#define CLK_DIV_MSK GENMASK(15, 4)
#define CLK_DIV_SHFT 4
+/* GENI_IF_DISABLE_RO fields */
+#define FIFO_IF_DISABLE (BIT(0))
+
/* GENI_FW_REVISION_RO fields */
#define FW_REV_PROTOCOL_MSK GENMASK(15, 8)
#define FW_REV_PROTOCOL_SHFT 8
diff --git a/include/soc/tegra/pm.h b/include/soc/tegra/pm.h
index 08477d7bfab9..433878927026 100644
--- a/include/soc/tegra/pm.h
+++ b/include/soc/tegra/pm.h
@@ -14,6 +14,7 @@ enum tegra_suspend_mode {
TEGRA_SUSPEND_LP1, /* CPU voltage off, DRAM self-refresh */
TEGRA_SUSPEND_LP0, /* CPU + core voltage off, DRAM self-refresh */
TEGRA_MAX_SUSPEND_MODE,
+ TEGRA_SUSPEND_NOT_READY,
};
#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_ARM)
@@ -28,6 +29,7 @@ void tegra_pm_clear_cpu_in_lp2(void);
void tegra_pm_set_cpu_in_lp2(void);
int tegra_pm_enter_lp2(void);
int tegra_pm_park_secondary_cpu(unsigned long cpu);
+void tegra_pm_init_suspend(void);
#else
static inline enum tegra_suspend_mode
tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode)
@@ -61,6 +63,10 @@ static inline int tegra_pm_park_secondary_cpu(unsigned long cpu)
{
return -ENOTSUPP;
}
+
+static inline void tegra_pm_init_suspend(void)
+{
+}
#endif /* CONFIG_PM_SLEEP */
#endif /* __SOC_TEGRA_PM_H__ */
diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
index 99aa27b100bc..6da2f80a85e8 100644
--- a/include/uapi/linux/virtio_ids.h
+++ b/include/uapi/linux/virtio_ids.h
@@ -55,6 +55,7 @@
#define VIRTIO_ID_FS 26 /* virtio filesystem */
#define VIRTIO_ID_PMEM 27 /* virtio pmem */
#define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */
+#define VIRTIO_ID_SCMI 32 /* virtio SCMI */
#define VIRTIO_ID_I2C_ADAPTER 34 /* virtio i2c adapter */
#define VIRTIO_ID_BT 40 /* virtio bluetooth */
diff --git a/include/uapi/linux/virtio_scmi.h b/include/uapi/linux/virtio_scmi.h
new file mode 100644
index 000000000000..f8ddd04a3ace
--- /dev/null
+++ b/include/uapi/linux/virtio_scmi.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020-2021 OpenSynergy GmbH
+ * Copyright (C) 2021 ARM Ltd.
+ */
+
+#ifndef _UAPI_LINUX_VIRTIO_SCMI_H
+#define _UAPI_LINUX_VIRTIO_SCMI_H
+
+#include <linux/virtio_types.h>
+
+/* Device implements some SCMI notifications, or delayed responses. */
+#define VIRTIO_SCMI_F_P2A_CHANNELS 0
+
+/* Device implements any SCMI statistics shared memory region */
+#define VIRTIO_SCMI_F_SHARED_MEMORY 1
+
+/* Virtqueues */
+
+#define VIRTIO_SCMI_VQ_TX 0 /* cmdq */
+#define VIRTIO_SCMI_VQ_RX 1 /* eventq */
+#define VIRTIO_SCMI_VQ_MAX_CNT 2
+
+#endif /* _UAPI_LINUX_VIRTIO_SCMI_H */