diff options
| -rw-r--r-- | drivers/scsi/hpsa.c | 136 | ||||
| -rw-r--r-- | drivers/scsi/hpsa.h | 1 | ||||
| -rw-r--r-- | drivers/scsi/hpsa_cmd.h | 6 |
3 files changed, 135 insertions, 8 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index c15d0b470864..b92f3bc21bf4 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -861,6 +861,28 @@ static void set_ioaccel1_performant_mode(struct ctlr_info *h, IOACCEL1_BUSADDR_CMDTYPE; } +static void set_ioaccel2_tmf_performant_mode(struct ctlr_info *h, + struct CommandList *c, + int reply_queue) +{ + struct hpsa_tmf_struct *cp = (struct hpsa_tmf_struct *) + &h->ioaccel2_cmd_pool[c->cmdindex]; + + /* Tell the controller to post the reply to the queue for this + * processor. This seems to give the best I/O throughput. + */ + if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) + cp->reply_queue = smp_processor_id() % h->nreply_queues; + else + cp->reply_queue = reply_queue % h->nreply_queues; + /* Set the bits in the address sent down to include: + * - performant mode bit not used in ioaccel mode 2 + * - pull count (bits 0-3) + * - command type isn't needed for ioaccel2 + */ + c->busaddr |= h->ioaccel2_blockFetchTable[0]; +} + static void set_ioaccel2_performant_mode(struct ctlr_info *h, struct CommandList *c, int reply_queue) @@ -927,6 +949,10 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h, set_ioaccel2_performant_mode(h, c, reply_queue); writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); break; + case IOACCEL2_TMF: + set_ioaccel2_tmf_performant_mode(h, c, reply_queue); + writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); + break; default: set_performant_mode(h, c, reply_queue); h->access.submit_command(h, c); @@ -4909,6 +4935,47 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, return rc; } +static void setup_ioaccel2_abort_cmd(struct CommandList *c, struct ctlr_info *h, + struct CommandList *command_to_abort, int reply_queue) +{ + struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; + struct hpsa_tmf_struct *ac = (struct hpsa_tmf_struct *) c2; + struct io_accel2_cmd *c2a = + &h->ioaccel2_cmd_pool[command_to_abort->cmdindex]; + struct scsi_cmnd *scmd = + (struct scsi_cmnd *) command_to_abort->scsi_cmd; + struct hpsa_scsi_dev_t *dev = scmd->device->hostdata; + + /* + * We're overlaying struct hpsa_tmf_struct on top of something which + * was allocated as a struct io_accel2_cmd, so we better be sure it + * actually fits, and doesn't overrun the error info space. + */ + BUILD_BUG_ON(sizeof(struct hpsa_tmf_struct) > + sizeof(struct io_accel2_cmd)); + BUG_ON(offsetof(struct io_accel2_cmd, error_data) < + offsetof(struct hpsa_tmf_struct, error_len) + + sizeof(ac->error_len)); + + c->cmd_type = IOACCEL2_TMF; + /* Adjust the DMA address to point to the accelerated command buffer */ + c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle + + (c->cmdindex * sizeof(struct io_accel2_cmd)); + BUG_ON(c->busaddr & 0x0000007F); + + memset(ac, 0, sizeof(*c2)); /* yes this is correct */ + ac->iu_type = IOACCEL2_IU_TMF_TYPE; + ac->reply_queue = reply_queue; + ac->tmf = IOACCEL2_TMF_ABORT; + ac->it_nexus = cpu_to_le32(dev->ioaccel_handle); + memset(ac->lun_id, 0, sizeof(ac->lun_id)); + ac->tag = cpu_to_le64(c->cmdindex << DIRECT_LOOKUP_SHIFT); + ac->abort_tag = cpu_to_le64(le32_to_cpu(c2a->Tag)); + ac->error_ptr = cpu_to_le64(c->busaddr + + offsetof(struct io_accel2_cmd, error_data)); + ac->error_len = cpu_to_le32(sizeof(c2->error_data)); +} + /* ioaccel2 path firmware cannot handle abort task requests. * Change abort requests to physical target reset, and send to the * address of the physical disk used for the ioaccel 2 command. @@ -4987,17 +5054,72 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, return rc; /* success */ } +static int hpsa_send_abort_ioaccel2(struct ctlr_info *h, + struct CommandList *abort, int reply_queue) +{ + int rc = IO_OK; + struct CommandList *c; + __le32 taglower, tagupper; + struct hpsa_scsi_dev_t *dev; + struct io_accel2_cmd *c2; + + dev = abort->scsi_cmd->device->hostdata; + if (!dev->offload_enabled && !dev->hba_ioaccel_enabled) + return -1; + + c = cmd_alloc(h); + setup_ioaccel2_abort_cmd(c, h, abort, reply_queue); + c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; + (void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); + hpsa_get_tag(h, abort, &taglower, &tagupper); + dev_dbg(&h->pdev->dev, + "%s: Tag:0x%08x:%08x: do_simple_cmd(ioaccel2 abort) completed.\n", + __func__, tagupper, taglower); + /* no unmap needed here because no data xfer. */ + + dev_dbg(&h->pdev->dev, + "%s: Tag:0x%08x:%08x: abort service response = 0x%02x.\n", + __func__, tagupper, taglower, c2->error_data.serv_response); + switch (c2->error_data.serv_response) { + case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE: + case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS: + rc = 0; + break; + case IOACCEL2_SERV_RESPONSE_TMF_REJECTED: + case IOACCEL2_SERV_RESPONSE_FAILURE: + case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN: + rc = -1; + break; + default: + dev_warn(&h->pdev->dev, + "%s: Tag:0x%08x:%08x: unknown abort service response 0x%02x\n", + __func__, tagupper, taglower, + c2->error_data.serv_response); + rc = -1; + } + cmd_free(h, c); + dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: Finished.\n", __func__, + tagupper, taglower); + return rc; +} + static int hpsa_send_abort_both_ways(struct ctlr_info *h, unsigned char *scsi3addr, struct CommandList *abort, int reply_queue) { - /* ioccelerator mode 2 commands should be aborted via the + /* + * ioccelerator mode 2 commands should be aborted via the * accelerated path, since RAID path is unaware of these commands, - * but underlying firmware can't handle abort TMF. - * Change abort to physical device reset. + * but not all underlying firmware can handle abort TMF. + * Change abort to physical device reset when abort TMF is unsupported. */ - if (abort->cmd_type == CMD_IOACCEL2) - return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, + if (abort->cmd_type == CMD_IOACCEL2) { + if (HPSATMF_IOACCEL_ENABLED & h->TMFSupportFlags) + return hpsa_send_abort_ioaccel2(h, abort, + reply_queue); + else + return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, abort, reply_queue); + } return hpsa_send_abort(h, scsi3addr, abort, reply_queue); } @@ -5887,7 +6009,7 @@ static inline void finish_cmd(struct CommandList *c) if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI || c->cmd_type == CMD_IOACCEL2)) complete_scsi_command(c); - else if (c->cmd_type == CMD_IOCTL_PEND) + else if (c->cmd_type == CMD_IOCTL_PEND || c->cmd_type == IOACCEL2_TMF) complete(c->waiting); } @@ -6668,6 +6790,8 @@ static void hpsa_find_board_params(struct ctlr_info *h) dev_warn(&h->pdev->dev, "Physical aborts not supported\n"); if (!(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags)) dev_warn(&h->pdev->dev, "Logical aborts not supported\n"); + if (!(HPSATMF_IOACCEL_ENABLED & h->TMFSupportFlags)) + dev_warn(&h->pdev->dev, "HP SSD Smart Path aborts not supported\n"); } static inline bool hpsa_CISS_signature_present(struct ctlr_info *h) diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 3acacf67bd22..28b5d794d6c7 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -231,6 +231,7 @@ struct ctlr_info { #define HPSATMF_PHYS_QRY_TASK (1 << 7) #define HPSATMF_PHYS_QRY_TSET (1 << 8) #define HPSATMF_PHYS_QRY_ASYNC (1 << 9) +#define HPSATMF_IOACCEL_ENABLED (1 << 15) #define HPSATMF_MASK_SUPPORTED (1 << 16) #define HPSATMF_LOG_LUN_RESET (1 << 17) #define HPSATMF_LOG_NEX_RESET (1 << 18) diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index cecb62bf0ffe..37195923d345 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -396,6 +396,7 @@ struct ErrorInfo { #define CMD_SCSI 0x03 #define CMD_IOACCEL1 0x04 #define CMD_IOACCEL2 0x05 +#define IOACCEL2_TMF 0x06 #define DIRECT_LOOKUP_SHIFT 4 #define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1)) @@ -590,6 +591,7 @@ struct io_accel2_cmd { #define IOACCEL2_DIR_NO_DATA 0x00 #define IOACCEL2_DIR_DATA_IN 0x01 #define IOACCEL2_DIR_DATA_OUT 0x02 +#define IOACCEL2_TMF_ABORT 0x01 /* * SCSI Task Management Request format for Accelerator Mode 2 */ @@ -598,13 +600,13 @@ struct hpsa_tmf_struct { u8 reply_queue; /* Reply Queue ID */ u8 tmf; /* Task Management Function */ u8 reserved1; /* byte 3 Reserved */ - u32 it_nexus; /* SCSI I-T Nexus */ + __le32 it_nexus; /* SCSI I-T Nexus */ u8 lun_id[8]; /* LUN ID for TMF request */ __le64 tag; /* cciss tag associated w/ request */ __le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */ __le64 error_ptr; /* Error Pointer */ __le32 error_len; /* Error Length */ -}; +} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); /* Configuration Table Structure */ struct HostWrite { |