diff options
| -rw-r--r-- | Documentation/devicetree/bindings/media/i2c/mt9p031.txt | 40 | ||||
| -rw-r--r-- | drivers/media/i2c/mt9p031.c | 42 |
2 files changed, 80 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt new file mode 100644 index 000000000000..cb60443ff78f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt @@ -0,0 +1,40 @@ +* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor + +The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 2592H x 1944V. It is programmable through a simple +two-wire serial interface. + +Required Properties: +- compatible: value should be either one among the following + (a) "aptina,mt9p031" for mt9p031 sensor + (b) "aptina,mt9p031m" for mt9p031m sensor + +- input-clock-frequency: Input clock frequency. + +- pixel-clock-frequency: Pixel clock frequency. + +Optional Properties: +- reset-gpios: Chip reset GPIO + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + mt9p031@5d { + compatible = "aptina,mt9p031"; + reg = <0x5d>; + reset-gpios = <&gpio3 30 0>; + + port { + mt9p031_1: endpoint { + input-clock-frequency = <6000000>; + pixel-clock-frequency = <96000000>; + }; + }; + }; + ... + }; diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c index fe3414866a63..1abc86ed2255 100644 --- a/drivers/media/i2c/mt9p031.c +++ b/drivers/media/i2c/mt9p031.c @@ -16,9 +16,10 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio.h> -#include <linux/module.h> #include <linux/i2c.h> #include <linux/log2.h> +#include <linux/module.h> +#include <linux/of_gpio.h> #include <linux/pm.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> @@ -27,6 +28,7 @@ #include <media/mt9p031.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> +#include <media/v4l2-of.h> #include <media/v4l2-subdev.h> #include "aptina-pll.h" @@ -927,10 +929,36 @@ static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = { * Driver initialization and probing */ +static struct mt9p031_platform_data * +mt9p031_get_pdata(struct i2c_client *client) +{ + struct mt9p031_platform_data *pdata; + struct device_node *np; + + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) + return client->dev.platform_data; + + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); + if (!np) + return NULL; + + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto done; + + pdata->reset = of_get_named_gpio(client->dev.of_node, "reset-gpios", 0); + of_property_read_u32(np, "input-clock-frequency", &pdata->ext_freq); + of_property_read_u32(np, "pixel-clock-frequency", &pdata->target_freq); + +done: + of_node_put(np); + return pdata; +} + static int mt9p031_probe(struct i2c_client *client, const struct i2c_device_id *did) { - struct mt9p031_platform_data *pdata = client->dev.platform_data; + struct mt9p031_platform_data *pdata = mt9p031_get_pdata(client); struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct mt9p031 *mt9p031; unsigned int i; @@ -1069,8 +1097,18 @@ static const struct i2c_device_id mt9p031_id[] = { }; MODULE_DEVICE_TABLE(i2c, mt9p031_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id mt9p031_of_match[] = { + { .compatible = "aptina,mt9p031", }, + { .compatible = "aptina,mt9p031m", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt9p031_of_match); +#endif + static struct i2c_driver mt9p031_i2c_driver = { .driver = { + .of_match_table = of_match_ptr(mt9p031_of_match), .name = "mt9p031", }, .probe = mt9p031_probe, |