diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml | 192 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/ethernet-controller.yaml | 35 | ||||
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 27 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477_reg.h | 3 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 105 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.h | 20 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_spi.c | 26 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/lan937x.h | 27 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/lan937x_main.c | 484 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/lan937x_reg.h | 180 | ||||
| -rw-r--r-- | include/net/dsa.h | 2 | ||||
| -rw-r--r-- | net/dsa/Kconfig | 4 | ||||
| -rw-r--r-- | net/dsa/tag_ksz.c | 59 |
16 files changed, 1143 insertions, 25 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml new file mode 100644 index 000000000000..630bf0f8294b --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml @@ -0,0 +1,192 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/microchip,lan937x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LAN937x Ethernet Switch Series Tree Bindings + +maintainers: + - UNGLinuxDriver@microchip.com + +allOf: + - $ref: dsa.yaml# + +properties: + compatible: + enum: + - microchip,lan9370 + - microchip,lan9371 + - microchip,lan9372 + - microchip,lan9373 + - microchip,lan9374 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + reset-gpios: + description: Optional gpio specifier for a reset line + maxItems: 1 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + +patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9]+$": + allOf: + - if: + properties: + phy-mode: + contains: + enum: + - rgmii + - rgmii-id + - rgmii-txid + - rgmii-rxid + then: + properties: + rx-internal-delay-ps: + enum: [0, 2000] + default: 0 + tx-internal-delay-ps: + enum: [0, 2000] + default: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + macb0 { + #address-cells = <1>; + #size-cells = <0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + lan9374: switch@0 { + compatible = "microchip,lan9374"; + reg = <0>; + spi-max-frequency = <44000000>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&t1phy0>; + }; + + port@1 { + reg = <1>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&t1phy1>; + }; + + port@2 { + reg = <2>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&t1phy2>; + }; + + port@3 { + reg = <3>; + label = "lan6"; + phy-mode = "internal"; + phy-handle = <&t1phy3>; + }; + + port@4 { + reg = <4>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + ethernet = <&macb0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "lan7"; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "lan5"; + phy-mode = "internal"; + phy-handle = <&t1phy6>; + }; + + port@7 { + reg = <7>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&t1phy7>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + t1phy0: ethernet-phy@0{ + reg = <0x0>; + }; + + t1phy1: ethernet-phy@1{ + reg = <0x1>; + }; + + t1phy2: ethernet-phy@2{ + reg = <0x2>; + }; + + t1phy3: ethernet-phy@3{ + reg = <0x3>; + }; + + t1phy6: ethernet-phy@6{ + reg = <0x6>; + }; + + t1phy7: ethernet-phy@7{ + reg = <0x7>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 4f15463611f8..56d9aca8c954 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -133,12 +133,6 @@ properties: and is useful for determining certain configuration settings such as flow control thresholds. - rx-internal-delay-ps: - description: | - RGMII Receive Clock Delay defined in pico seconds. - This is used for controllers that have configurable RX internal delays. - If this property is present then the MAC applies the RX delay. - sfp: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -150,12 +144,6 @@ properties: The size of the controller\'s transmit fifo in bytes. This is used for components that can have configurable fifo sizes. - tx-internal-delay-ps: - description: | - RGMII Transmit Clock Delay defined in pico seconds. - This is used for controllers that have configurable TX internal delays. - If this property is present then the MAC applies the TX delay. - managed: description: Specifies the PHY management type. If auto is set and fixed-link @@ -232,6 +220,29 @@ properties: required: - speed +allOf: + - if: + properties: + phy-mode: + contains: + enum: + - rgmii + - rgmii-rxid + - rgmii-txid + - rgmii-id + then: + properties: + rx-internal-delay-ps: + description: + RGMII Receive Clock Delay defined in pico seconds.This is used for + controllers that have configurable RX internal delays. If this + property is present then the MAC applies the RX delay. + tx-internal-delay-ps: + description: + RGMII Transmit Clock Delay defined in pico seconds.This is used for + controllers that have configurable TX internal delays. If this + property is present then the MAC applies the TX delay. + additionalProperties: true ... diff --git a/MAINTAINERS b/MAINTAINERS index d99fedb48ab5..99f8a65fd79b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13104,6 +13104,7 @@ M: UNGLinuxDriver@microchip.com L: netdev@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +F: Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml F: drivers/net/dsa/microchip/* F: include/linux/platform_data/microchip-ksz.h F: net/dsa/tag_ksz.c diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig index 2edb88080790..06b1efdb5e7d 100644 --- a/drivers/net/dsa/microchip/Kconfig +++ b/drivers/net/dsa/microchip/Kconfig @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig NET_DSA_MICROCHIP_KSZ_COMMON - tristate "Microchip KSZ8795/KSZ9477 series switch support" + tristate "Microchip KSZ8795/KSZ9477/LAN937x series switch support" depends on NET_DSA select NET_DSA_TAG_KSZ help diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile index b2ba7c1bcb93..28873559efc2 100644 --- a/drivers/net/dsa/microchip/Makefile +++ b/drivers/net/dsa/microchip/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_switch.o ksz_switch-objs := ksz_common.o ksz_switch-objs += ksz9477.o ksz_switch-objs += ksz8795.o +ksz_switch-objs += lan937x_main.o obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C) += ksz9477_i2c.o obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_SPI) += ksz_spi.o obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI) += ksz8863_smi.o diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 0e808d27124c..6453642fa14c 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -644,11 +644,16 @@ int ksz9477_mdb_add(struct ksz_device *dev, int port, const struct switchdev_obj_port_mdb *mdb, struct dsa_db db) { u32 static_table[4]; + const u8 *shifts; + const u32 *masks; u32 data; int index; u32 mac_hi, mac_lo; int err = 0; + shifts = dev->info->shifts; + masks = dev->info->masks; + mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); @@ -657,8 +662,8 @@ int ksz9477_mdb_add(struct ksz_device *dev, int port, for (index = 0; index < dev->info->num_statics; index++) { /* find empty slot first */ - data = (index << ALU_STAT_INDEX_S) | - ALU_STAT_READ | ALU_STAT_START; + data = (index << shifts[ALU_STAT_INDEX]) | + masks[ALU_STAT_READ] | ALU_STAT_START; ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); /* wait to be finished */ @@ -702,7 +707,7 @@ int ksz9477_mdb_add(struct ksz_device *dev, int port, ksz9477_write_table(dev, static_table); - data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; + data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START; ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); /* wait to be finished */ @@ -718,11 +723,16 @@ int ksz9477_mdb_del(struct ksz_device *dev, int port, const struct switchdev_obj_port_mdb *mdb, struct dsa_db db) { u32 static_table[4]; + const u8 *shifts; + const u32 *masks; u32 data; int index; int ret = 0; u32 mac_hi, mac_lo; + shifts = dev->info->shifts; + masks = dev->info->masks; + mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); @@ -731,8 +741,8 @@ int ksz9477_mdb_del(struct ksz_device *dev, int port, for (index = 0; index < dev->info->num_statics; index++) { /* find empty slot first */ - data = (index << ALU_STAT_INDEX_S) | - ALU_STAT_READ | ALU_STAT_START; + data = (index << shifts[ALU_STAT_INDEX]) | + masks[ALU_STAT_READ] | ALU_STAT_START; ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); /* wait to be finished */ @@ -774,7 +784,7 @@ int ksz9477_mdb_del(struct ksz_device *dev, int port, ksz9477_write_table(dev, static_table); - data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; + data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START; ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); /* wait to be finished */ @@ -1230,9 +1240,12 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds) int ksz9477_enable_stp_addr(struct ksz_device *dev) { + const u32 *masks; u32 data; int ret; + masks = dev->info->masks; + /* Enable Reserved multicast table */ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true); @@ -1242,7 +1255,7 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev) if (ret < 0) return ret; - data = ALU_STAT_START | ALU_RESV_MCAST_ADDR; + data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE]; ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); if (ret < 0) diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h index 2ba0f4449130..d0cce4ca3cf9 100644 --- a/drivers/net/dsa/microchip/ksz9477_reg.h +++ b/drivers/net/dsa/microchip/ksz9477_reg.h @@ -419,12 +419,9 @@ #define REG_SW_ALU_STAT_CTRL__4 0x041C -#define ALU_STAT_INDEX_M (BIT(4) - 1) -#define ALU_STAT_INDEX_S 16 #define ALU_RESV_MCAST_INDEX_M (BIT(6) - 1) #define ALU_STAT_START BIT(7) #define ALU_RESV_MCAST_ADDR BIT(1) -#define ALU_STAT_READ BIT(0) #define REG_SW_ALU_VAL_A 0x0420 diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 29b42b3b39c9..28d7cb2ce98f 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -23,6 +23,7 @@ #include "ksz_common.h" #include "ksz8.h" #include "ksz9477.h" +#include "lan937x.h" #define MIB_COUNTER_NUM 0x20 @@ -201,6 +202,41 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .exit = ksz9477_switch_exit, }; +static const struct ksz_dev_ops lan937x_dev_ops = { + .setup = lan937x_setup, + .get_port_addr = ksz9477_get_port_addr, + .cfg_port_member = ksz9477_cfg_port_member, + .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table, + .port_setup = lan937x_port_setup, + .r_phy = lan937x_r_phy, + .w_phy = lan937x_w_phy, + .r_mib_cnt = ksz9477_r_mib_cnt, + .r_mib_pkt = ksz9477_r_mib_pkt, + .r_mib_stat64 = ksz_r_mib_stats64, + .freeze_mib = ksz9477_freeze_mib, + .port_init_cnt = ksz9477_port_init_cnt, + .vlan_filtering = ksz9477_port_vlan_filtering, + .vlan_add = ksz9477_port_vlan_add, + .vlan_del = ksz9477_port_vlan_del, + .mirror_add = ksz9477_port_mirror_add, + .mirror_del = ksz9477_port_mirror_del, + .get_caps = lan937x_phylink_get_caps, + .phylink_mac_config = lan937x_phylink_mac_config, + .phylink_mac_link_up = lan937x_phylink_mac_link_up, + .fdb_dump = ksz9477_fdb_dump, + .fdb_add = ksz9477_fdb_add, + .fdb_del = ksz9477_fdb_del, + .mdb_add = ksz9477_mdb_add, + .mdb_del = ksz9477_mdb_del, + .change_mtu = lan937x_change_mtu, + .max_mtu = ksz9477_max_mtu, + .config_cpu_port = lan937x_config_cpu_port, + .enable_stp_addr = ksz9477_enable_stp_addr, + .reset = lan937x_reset_switch, + .init = lan937x_switch_init, + .exit = lan937x_switch_exit, +}; + static const u16 ksz8795_regs[] = { [REG_IND_CTRL_0] = 0x6E, [REG_IND_DATA_8] = 0x70, @@ -314,7 +350,24 @@ static const u16 ksz9477_regs[] = { [S_START_CTRL] = 0x0300, [S_BROADCAST_CTRL] = 0x0332, [S_MULTICAST_CTRL] = 0x0331, +}; + +static const u32 ksz9477_masks[] = { + [ALU_STAT_WRITE] = 0, + [ALU_STAT_READ] = 1, +}; +static const u8 ksz9477_shifts[] = { + [ALU_STAT_INDEX] = 16, +}; + +static const u32 lan937x_masks[] = { + [ALU_STAT_WRITE] = 1, + [ALU_STAT_READ] = 2, +}; + +static const u8 lan937x_shifts[] = { + [ALU_STAT_INDEX] = 8, }; const struct ksz_chip_data ksz_switch_chips[] = { @@ -432,6 +485,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, .supports_mii = {false, false, false, false, false, true, false}, .supports_rmii = {false, false, false, false, @@ -456,6 +511,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, .supports_mii = {false, false, false, false, false, true, true}, .supports_rmii = {false, false, false, false, @@ -479,6 +536,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, .supports_mii = {false, false, true}, .supports_rmii = {false, false, true}, .supports_rgmii = {false, false, true}, @@ -499,6 +558,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, .supports_mii = {false, false, false, false, false, true, true}, .supports_rmii = {false, false, false, false, @@ -517,10 +578,13 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_statics = 256, .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total physical port count */ + .ops = &lan937x_dev_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, .supports_mii = {false, false, false, false, true}, .supports_rmii = {false, false, false, false, true}, .supports_rgmii = {false, false, false, false, true}, @@ -535,10 +599,13 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_statics = 256, .cpu_ports = 0x30, /* can be configured as cpu port */ .port_cnt = 6, /* total physical port count */ + .ops = &lan937x_dev_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, .supports_mii = {false, false, false, false, true, true}, .supports_rmii = {false, false, false, false, true, true}, .supports_rgmii = {false, false, false, false, true, true}, @@ -553,10 +620,13 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_statics = 256, .cpu_ports = 0x30, /* can be configured as cpu port */ .port_cnt = 8, /* total physical port count */ + .ops = &lan937x_dev_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, .supports_mii = {false, false, false, false, true, true, false, false}, .supports_rmii = {false, false, false, false, @@ -575,10 +645,13 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_statics = 256, .cpu_ports = 0x38, /* can be configured as cpu port */ .port_cnt = 5, /* total physical port count */ + .ops = &lan937x_dev_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, .supports_mii = {false, false, false, false, true, true, false, false}, .supports_rmii = {false, false, false, false, @@ -597,10 +670,13 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_statics = 256, .cpu_ports = 0x30, /* can be configured as cpu port */ .port_cnt = 8, /* total physical port count */ + .ops = &lan937x_dev_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, .supports_mii = {false, false, false, false, true, true, false, false}, .supports_rmii = {false, false, false, false, @@ -1185,6 +1261,9 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, dev->chip_id == KSZ9567_CHIP_ID) proto = DSA_TAG_PROTO_KSZ9477; + if (is_lan937x(dev)) + proto = DSA_TAG_PROTO_LAN937X_VALUE; + return proto; } @@ -1263,6 +1342,30 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) return dev->dev_ops->max_mtu(dev, port); } +static void ksz_phylink_mac_config(struct dsa_switch *ds, int port, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct ksz_device *dev = ds->priv; + + if (dev->dev_ops->phylink_mac_config) + dev->dev_ops->phylink_mac_config(dev, port, mode, state); +} + +static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev, int speed, + int duplex, bool tx_pause, bool rx_pause) +{ + struct ksz_device *dev = ds->priv; + + if (dev->dev_ops->phylink_mac_link_up) + dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface, + phydev, speed, duplex, + tx_pause, rx_pause); +} + static int ksz_switch_detect(struct ksz_device *dev) { u8 id1, id2; @@ -1336,6 +1439,8 @@ static const struct dsa_switch_ops ksz_switch_ops = { .phy_read = ksz_phy_read16, .phy_write = ksz_phy_write16, .phylink_get_caps = ksz_phylink_get_caps, + .phylink_mac_config = ksz_phylink_mac_config, + .phylink_mac_link_up = ksz_phylink_mac_link_up, .phylink_mac_link_down = ksz_mac_link_down, .port_enable = ksz_enable_port, .get_strings = ksz_get_strings, diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index b61e569a9949..d5dddb7ec045 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -191,6 +191,8 @@ enum ksz_masks { DYNAMIC_MAC_TABLE_FID, DYNAMIC_MAC_TABLE_SRC_PORT, DYNAMIC_MAC_TABLE_TIMESTAMP, + ALU_STAT_WRITE, + ALU_STAT_READ, }; enum ksz_shifts { @@ -203,6 +205,7 @@ enum ksz_shifts { DYNAMIC_MAC_FID, DYNAMIC_MAC_TIMESTAMP, DYNAMIC_MAC_SRC_PORT, + ALU_STAT_INDEX, }; struct alu_struct { @@ -268,6 +271,14 @@ struct ksz_dev_ops { int (*max_mtu)(struct ksz_device *dev, int port); void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze); void (*port_init_cnt)(struct ksz_device *dev, int port); + void (*phylink_mac_config)(struct ksz_device *dev, int port, + unsigned int mode, + const struct phylink_link_state *state); + void (*phylink_mac_link_up)(struct ksz_device *dev, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev, int speed, + int duplex, bool tx_pause, bool rx_pause); void (*config_cpu_port)(struct dsa_switch *ds); int (*enable_stp_addr)(struct ksz_device *dev); int (*reset)(struct ksz_device *dev); @@ -400,6 +411,15 @@ static inline void ksz_regmap_unlock(void *__mtx) mutex_unlock(mtx); } +static inline int is_lan937x(struct ksz_device *dev) +{ + return dev->chip_id == LAN9370_CHIP_ID || + dev->chip_id == LAN9371_CHIP_ID || + dev->chip_id == LAN9372_CHIP_ID || + dev->chip_id == LAN9373_CHIP_ID || + dev->chip_id == LAN9374_CHIP_ID; +} + /* STP State Defines */ #define PORT_TX_ENABLE BIT(2) #define PORT_RX_ENABLE BIT(1) diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c index 69fabb190f26..4844830dca72 100644 --- a/drivers/net/dsa/microchip/ksz_spi.c +++ b/drivers/net/dsa/microchip/ksz_spi.c @@ -166,6 +166,26 @@ static const struct of_device_id ksz_dt_ids[] = { .compatible = "microchip,ksz9567", .data = &ksz_switch_chips[KSZ9567] }, + { + .compatible = "microchip,lan9370", + .data = &ksz_switch_chips[LAN9370] + }, + { + .compatible = "microchip,lan9371", + .data = &ksz_switch_chips[LAN9371] + }, + { + .compatible = "microchip,lan9372", + .data = &ksz_switch_chips[LAN9372] + }, + { + .compatible = "microchip,lan9373", + .data = &ksz_switch_chips[LAN9373] + }, + { + .compatible = "microchip,lan9374", + .data = &ksz_switch_chips[LAN9374] + }, {}, }; MODULE_DEVICE_TABLE(of, ksz_dt_ids); @@ -182,6 +202,11 @@ static const struct spi_device_id ksz_spi_ids[] = { { "ksz9563" }, { "ksz8563" }, { "ksz9567" }, + { "lan9370" }, + { "lan9371" }, + { "lan9372" }, + { "lan9373" }, + { "lan9374" }, { }, }; MODULE_DEVICE_TABLE(spi, ksz_spi_ids); @@ -206,6 +231,7 @@ MODULE_ALIAS("spi:ksz9893"); MODULE_ALIAS("spi:ksz9563"); MODULE_ALIAS("spi:ksz8563"); MODULE_ALIAS("spi:ksz9567"); +MODULE_ALIAS("spi:lan937x"); MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>"); MODULE_DESCRIPTION("Microchip ksz Series Switch SPI Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/microchip/lan937x.h b/drivers/net/dsa/microchip/lan937x.h new file mode 100644 index 000000000000..72ba9cb2fbc6 --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Microchip lan937x dev ops headers + * Copyright (C) 2019-2022 Microchip Technology Inc. + */ + +#ifndef __LAN937X_CFG_H +#define __LAN937X_CFG_H + +int lan937x_reset_switch(struct ksz_device *dev); +int lan937x_setup(struct dsa_switch *ds); +void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port); +void lan937x_config_cpu_port(struct dsa_switch *ds); +int lan937x_switch_init(struct ksz_device *dev); +void lan937x_switch_exit(struct ksz_device *dev); +void lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data); +void lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val); +int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu); +void lan937x_phylink_get_caps(struct ksz_device *dev, int port, + struct phylink_config *config); +void lan937x_phylink_mac_link_up(struct ksz_device *dev, int port, + unsigned int mode, phy_interface_t interface, + struct phy_device *phydev, int speed, + int duplex, bool tx_pause, bool rx_pause); +void lan937x_phylink_mac_config(struct ksz_device *dev, int port, + unsigned int mode, + const struct phylink_link_state *state); +#endif diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c new file mode 100644 index 000000000000..c29d175ca6f7 --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x_main.c @@ -0,0 +1,484 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Microchip LAN937X switch driver main logic + * Copyright (C) 2019-2022 Microchip Technology Inc. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/iopoll.h> +#include <linux/phy.h> +#include <linux/of_net.h> +#include <linux/of_mdio.h> +#include <linux/if_bridge.h> +#include <linux/if_vlan.h> +#include <linux/math.h> +#include <net/dsa.h> +#include <net/switchdev.h> + +#include "lan937x_reg.h" +#include "ksz_common.h" +#include "lan937x.h" + +static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) +{ + return regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); +} + +static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset, + u8 bits, bool set) +{ + return regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +static int lan937x_enable_spi_indirect_access(struct ksz_device *dev) +{ + u16 data16; + int ret; + + /* Enable Phy access through SPI */ + ret = lan937x_cfg(dev, REG_GLOBAL_CTRL_0, SW_PHY_REG_BLOCK, false); + if (ret < 0) + return ret; + + ret = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16); + if (ret < 0) + return ret; + + /* Allow SPI access */ + data16 |= VPHY_SPI_INDIRECT_ENABLE; + + return ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16); +} + +static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg) +{ + u16 addr_base = REG_PORT_T1_PHY_CTRL_BASE; + u16 temp; + + /* get register address based on the logical port */ + temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2))); + + return ksz_write16(dev, REG_VPHY_IND_ADDR__2, temp); +} + +static int lan937x_internal_phy_write(struct ksz_device *dev, int addr, int reg, + u16 val) +{ + unsigned int value; + int ret; + + /* Check for internal phy port */ + if (!dev->info->internal_phy[addr]) + return -EOPNOTSUPP; + + ret = lan937x_vphy_ind_addr_wr(dev, addr, reg); + if (ret < 0) + return ret; + + /* Write the data to be written to the VPHY reg */ + ret = ksz_write16(dev, REG_VPHY_IND_DATA__2, val); + if (ret < 0) + return ret; + + /* Write the Write En and Busy bit */ + ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, + (VPHY_IND_WRITE | VPHY_IND_BUSY)); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2, + value, !(value & VPHY_IND_BUSY), 10, + 1000); + if (ret < 0) { + dev_err(dev->dev, "Failed to write phy register\n"); + return ret; + } + + return 0; +} + +static int lan937x_internal_phy_read(struct ksz_device *dev, int addr, int reg, + u16 *val) +{ + unsigned int value; + int ret; + + /* Check for internal phy port, return 0xffff for non-existent phy */ + if (!dev->info->internal_phy[addr]) + return 0xffff; + + ret = lan937x_vphy_ind_addr_wr(dev, addr, reg); + if (ret < 0) + return ret; + + /* Write Read and Busy bit to start the transaction */ + ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, VPHY_IND_BUSY); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2, + value, !(value & VPHY_IND_BUSY), 10, + 1000); + if (ret < 0) { + dev_err(dev->dev, "Failed to read phy register\n"); + return ret; + } + + /* Read the VPHY register which has the PHY data */ + return ksz_read16(dev, REG_VPHY_IND_DATA__2, val); +} + +void lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) +{ + lan937x_internal_phy_read(dev, addr, reg, data); +} + +void lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) +{ + lan937x_internal_phy_write(dev, addr, reg, val); +} + +static int lan937x_sw_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct ksz_device *dev = bus->priv; + u16 val; + int ret; + + if (regnum & MII_ADDR_C45) + return -EOPNOTSUPP; + + ret = lan937x_internal_phy_read(dev, addr, regnum, &val); + if (ret < 0) + return ret; + + return val; +} + +static int lan937x_sw_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct ksz_device *dev = bus->priv; + + if (regnum & MII_ADDR_C45) + return -EOPNOTSUPP; + + return lan937x_internal_phy_write(dev, addr, regnum, val); +} + +static int lan937x_mdio_register(struct ksz_device *dev) +{ + struct dsa_switch *ds = dev->ds; + struct device_node *mdio_np; + struct mii_bus *bus; + int ret; + + mdio_np = of_get_child_by_name(dev->dev->of_node, "mdio"); + if (!mdio_np) { + dev_err(ds->dev, "no MDIO bus node\n"); + return -ENODEV; + } + + bus = devm_mdiobus_alloc(ds->dev); + if (!bus) { + of_node_put(mdio_np); + return -ENOMEM; + } + + bus->priv = dev; + bus->read = lan937x_sw_mdio_read; + bus->write = lan937x_sw_mdio_write; + bus->name = "lan937x slave smi"; + snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index); + bus->parent = ds->dev; + bus->phy_mask = ~ds->phys_mii_mask; + + ds->slave_mii_bus = bus; + + ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np); + if (ret) { + dev_err(ds->dev, "unable to register MDIO bus %s\n", + bus->id); + } + + of_node_put(mdio_np); + + return ret; +} + +int lan937x_reset_switch(struct ksz_device *dev) +{ + u32 data32; + int ret; + + /* reset switch */ + ret = lan937x_cfg(dev, REG_SW_OPERATION, SW_RESET, true); + if (ret < 0) + return ret; + + /* Enable Auto Aging */ + ret = lan937x_cfg(dev, REG_SW_LUE_CTRL_1, SW_LINK_AUTO_AGING, true); + if (ret < 0) + return ret; + + /* disable interrupts */ + ret = ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); + if (ret < 0) + return ret; + + ret = ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0xFF); + if (ret < 0) + return ret; + + return ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); +} + +void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port) +{ + struct dsa_switch *ds = dev->ds; + u8 member; + + /* enable tag tail for host port */ + if (cpu_port) + lan937x_port_cfg(dev, port, REG_PORT_CTRL_0, + PORT_TAIL_TAG_ENABLE, true); + + /* disable frame check length field */ + lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, PORT_CHECK_LENGTH, + false); + + /* set back pressure for half duplex */ + lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, + true); + + /* enable 802.1p priority */ + lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); + + if (!dev->info->internal_phy[port]) + lan937x_port_cfg(dev, port, REG_PORT_XMII_CTRL_0, + PORT_MII_TX_FLOW_CTRL | PORT_MII_RX_FLOW_CTRL, + true); + + if (cpu_port) + member = dsa_user_ports(ds); + else + member = BIT(dsa_upstream_port(ds, port)); + + dev->dev_ops->cfg_port_member(dev, port, member); +} + +void lan937x_config_cpu_port(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct dsa_port *dp; + + dsa_switch_for_each_cpu_port(dp, ds) { + if (dev->info->cpu_ports & (1 << dp->index)) { + dev->cpu_port = dp->index; + + /* enable cpu port */ + lan937x_port_setup(dev, dp->index, true); + } + } + + dsa_switch_for_each_user_port(dp, ds) { + ksz_port_stp_state_set(ds, dp->index, BR_STATE_DISABLED); + } +} + +int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu) +{ + struct dsa_switch *ds = dev->ds; + int ret; + + new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN; + + if (dsa_is_cpu_port(ds, port)) + new_mtu += LAN937X_TAG_LEN; + + if (new_mtu >= FR_MIN_SIZE) + ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, + PORT_JUMBO_PACKET, true); + else + ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, + PORT_JUMBO_PACKET, false); + if (ret < 0) { + dev_err(ds->dev, "failed to enable jumbo\n"); + return ret; + } + + /* Write the frame size in PORT_MAX_FR_SIZE register */ + ksz_pwrite16(dev, port, PORT_MAX_FR_SIZE, new_mtu); + + return 0; +} + +static void lan937x_config_gbit(struct ksz_device *dev, bool gbit, u8 *data) +{ + if (gbit) + *data &= ~PORT_MII_NOT_1GBIT; + else + *data |= PORT_MII_NOT_1GBIT; +} + +static void lan937x_mac_config(struct ksz_device *dev, int port, + phy_interface_t interface) +{ + u8 data8; + + ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); + + /* clear MII selection & set it based on interface later */ + data8 &= ~PORT_MII_SEL_M; + + /* configure MAC based on interface */ + switch (interface) { + case PHY_INTERFACE_MODE_MII: + lan937x_config_gbit(dev, false, &data8); + data8 |= PORT_MII_SEL; + break; + case PHY_INTERFACE_MODE_RMII: + lan937x_config_gbit(dev, false, &data8); + data8 |= PORT_RMII_SEL; + break; + default: + dev_err(dev->dev, "Unsupported interface '%s' for port %d\n", + phy_modes(interface), port); + return; + } + + /* Write the updated value */ + ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8); +} + +static void lan937x_config_interface(struct ksz_device *dev, int port, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + u8 xmii_ctrl0, xmii_ctrl1; + + ksz_pread8(dev, port, REG_PORT_XMII_CTRL_0, &xmii_ctrl0); + ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &xmii_ctrl1); + + xmii_ctrl0 &= ~(PORT_MII_100MBIT | PORT_MII_FULL_DUPLEX | + PORT_MII_TX_FLOW_CTRL | PORT_MII_RX_FLOW_CTRL); + + if (speed == SPEED_1000) + lan937x_config_gbit(dev, true, &xmii_ctrl1); + else + lan937x_config_gbit(dev, false, &xmii_ctrl1); + + if (speed == SPEED_100) + xmii_ctrl0 |= PORT_MII_100MBIT; + + if (duplex) + xmii_ctrl0 |= PORT_MII_FULL_DUPLEX; + + if (tx_pause) + xmii_ctrl0 |= PORT_MII_TX_FLOW_CTRL; + + if (rx_pause) + xmii_ctrl0 |= PORT_MII_RX_FLOW_CTRL; + + ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_0, xmii_ctrl0); + ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, xmii_ctrl1); +} + +void lan937x_phylink_get_caps(struct ksz_device *dev, int port, + struct phylink_config *config) +{ + config->mac_capabilities = MAC_100FD; + + if (dev->info->supports_rgmii[port]) { + /* MII/RMII/RGMII ports */ + config->mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_100HD | MAC_10 | MAC_1000FD; + } +} + +void lan937x_phylink_mac_link_up(struct ksz_device *dev, int port, + unsigned int mode, phy_interface_t interface, + struct phy_device *phydev, int speed, + int duplex, bool tx_pause, bool rx_pause) +{ + /* Internal PHYs */ + if (dev->info->internal_phy[port]) + return; + + lan937x_config_interface(dev, port, speed, duplex, + tx_pause, rx_pause); +} + +void lan937x_phylink_mac_config(struct ksz_device *dev, int port, + unsigned int mode, + const struct phylink_link_state *state) +{ + /* Internal PHYs */ + if (dev->info->internal_phy[port]) + return; + + if (phylink_autoneg_inband(mode)) { + dev_err(dev->dev, "In-band AN not supported!\n"); + return; + } + + lan937x_mac_config(dev, port, state->interface); +} + +int lan937x_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + int ret; + + /* enable Indirect Access from SPI to the VPHY registers */ + ret = lan937x_enable_spi_indirect_access(dev); + if (ret < 0) { + dev_err(dev->dev, "failed to enable spi indirect access"); + return ret; + } + + ret = lan937x_mdio_register(dev); + if (ret < 0) { + dev_err(dev->dev, "failed to register the mdio"); + return ret; + } + + /* The VLAN aware is a global setting. Mixed vlan + * filterings are not supported. + */ + ds->vlan_filtering_is_global = true; + + /* Enable aggressive back off for half duplex & UNH mode */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_0, + (SW_PAUSE_UNH_MODE | SW_NEW_BACKOFF | SW_AGGR_BACKOFF), + true); + + /* If NO_EXC_COLLISION_DROP bit is set, the switch will not drop + * packets when 16 or more collisions occur + */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_1, NO_EXC_COLLISION_DROP, true); + + /* enable global MIB counter freeze function */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); + + /* disable CLK125 & CLK25, 1: disable, 0: enable */ + lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, + (SW_CLK125_ENB | SW_CLK25_ENB), true); + + return 0; +} + +int lan937x_switch_init(struct ksz_device *dev) +{ + dev->port_mask = (1 << dev->info->port_cnt) - 1; + + return 0; +} + +void lan937x_switch_exit(struct ksz_device *dev) +{ + lan937x_reset_switch(dev); +} + +MODULE_AUTHOR("Arun Ramadoss <arun.ramadoss@microchip.com>"); +MODULE_DESCRIPTION("Microchip LAN937x Series Switch DSA Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h new file mode 100644 index 000000000000..c187d0a3e7fa --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x_reg.h @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Microchip LAN937X switch register definitions + * Copyright (C) 2019-2021 Microchip Technology Inc. + */ +#ifndef __LAN937X_REG_H +#define __LAN937X_REG_H + +#define PORT_CTRL_ADDR(port, addr) ((addr) | (((port) + 1) << 12)) + +/* 0 - Operation */ +#define REG_GLOBAL_CTRL_0 0x0007 + +#define SW_PHY_REG_BLOCK BIT(7) +#define SW_FAST_MODE BIT(3) +#define SW_FAST_MODE_OVERRIDE BIT(2) + +#define REG_SW_INT_STATUS__4 0x0010 +#define REG_SW_INT_MASK__4 0x0014 + +#define LUE_INT BIT(31) +#define TRIG_TS_INT BIT(30) +#define APB_TIMEOUT_INT BIT(29) +#define OVER_TEMP_INT BIT(28) +#define HSR_INT BIT(27) +#define PIO_INT BIT(26) +#define POR_READY_INT BIT(25) + +#define SWITCH_INT_MASK \ + (LUE_INT | TRIG_TS_INT | APB_TIMEOUT_INT | OVER_TEMP_INT | HSR_INT | \ + PIO_INT | POR_READY_INT) + +#define REG_SW_PORT_INT_STATUS__4 0x0018 +#define REG_SW_PORT_INT_MASK__4 0x001C + +/* 1 - Global */ +#define REG_SW_GLOBAL_OUTPUT_CTRL__1 0x0103 +#define SW_CLK125_ENB BIT(1) +#define SW_CLK25_ENB BIT(0) + +/* 3 - Operation Control */ +#define REG_SW_OPERATION 0x0300 + +#define SW_DOUBLE_TAG BIT(7) +#define SW_OVER_TEMP_ENABLE BIT(2) +#define SW_RESET BIT(1) + +#define REG_SW_LUE_CTRL_0 0x0310 + +#define SW_VLAN_ENABLE BIT(7) +#define SW_DROP_INVALID_VID BIT(6) +#define SW_AGE_CNT_M 0x7 +#define SW_AGE_CNT_S 3 +#define SW_RESV_MCAST_ENABLE BIT(2) + +#define REG_SW_LUE_CTRL_1 0x0311 + +#define UNICAST_LEARN_DISABLE BIT(7) +#define SW_FLUSH_STP_TABLE BIT(5) +#define SW_FLUSH_MSTP_TABLE BIT(4) +#define SW_SRC_ADDR_FILTER BIT(3) +#define SW_AGING_ENABLE BIT(2) +#define SW_FAST_AGING BIT(1) +#define SW_LINK_AUTO_AGING BIT(0) + +#define REG_SW_MAC_CTRL_0 0x0330 +#define SW_NEW_BACKOFF BIT(7) +#define SW_PAUSE_UNH_MODE BIT(1) +#define SW_AGGR_BACKOFF BIT(0) + +#define REG_SW_MAC_CTRL_1 0x0331 +#define SW_SHORT_IFG BIT(7) +#define MULTICAST_STORM_DISABLE BIT(6) +#define SW_BACK_PRESSURE BIT(5) +#define FAIR_FLOW_CTRL BIT(4) +#define NO_EXC_COLLISION_DROP BIT(3) +#define SW_LEGAL_PACKET_DISABLE BIT(1) +#define SW_PASS_SHORT_FRAME BIT(0) + +#define REG_SW_MAC_CTRL_6 0x0336 +#define SW_MIB_COUNTER_FLUSH BIT(7) +#define SW_MIB_COUNTER_FREEZE BIT(6) + +/* 4 - LUE */ +#define REG_SW_ALU_STAT_CTRL__4 0x041C + +#define REG_SW_ALU_VAL_B 0x0424 +#define ALU_V_OVERRIDE BIT(31) +#define ALU_V_USE_FID BIT(30) +#define ALU_V_PORT_MAP 0xFF + +/* 7 - VPhy */ +#define REG_VPHY_IND_ADDR__2 0x075C +#define REG_VPHY_IND_DATA__2 0x0760 + +#define REG_VPHY_IND_CTRL__2 0x0768 + +#define VPHY_IND_WRITE BIT(1) +#define VPHY_IND_BUSY BIT(0) + +#define REG_VPHY_SPECIAL_CTRL__2 0x077C +#define VPHY_SMI_INDIRECT_ENABLE BIT(15) +#define VPHY_SW_LOOPBACK BIT(14) +#define VPHY_MDIO_INTERNAL_ENABLE BIT(13) +#define VPHY_SPI_INDIRECT_ENABLE BIT(12) +#define VPHY_PORT_MODE_M 0x3 +#define VPHY_PORT_MODE_S 8 +#define VPHY_MODE_RGMII 0 +#define VPHY_MODE_MII_PHY 1 +#define VPHY_MODE_SGMII 2 +#define VPHY_MODE_RMII_PHY 3 +#define VPHY_SW_COLLISION_TEST BIT(7) +#define VPHY_SPEED_DUPLEX_STAT_M 0x7 +#define VPHY_SPEED_DUPLEX_STAT_S 2 +#define VPHY_SPEED_1000 BIT(4) +#define VPHY_SPEED_100 BIT(3) +#define VPHY_FULL_DUPLEX BIT(2) + +/* Port Registers */ + +/* 0 - Operation */ +#define REG_PORT_CTRL_0 0x0020 + +#define PORT_MAC_LOOPBACK BIT(7) +#define PORT_MAC_REMOTE_LOOPBACK BIT(6) +#define PORT_K2L_INSERT_ENABLE BIT(5) +#define PORT_K2L_DEBUG_ENABLE BIT(4) +#define PORT_TAIL_TAG_ENABLE BIT(2) +#define PORT_QUEUE_SPLIT_ENABLE 0x3 + +/* 1 - Phy */ +#define REG_PORT_T1_PHY_CTRL_BASE 0x0100 + +/* 3 - xMII */ +#define REG_PORT_XMII_CTRL_0 0x0300 +#define PORT_SGMII_SEL BIT(7) +#define PORT_MII_FULL_DUPLEX BIT(6) +#define PORT_MII_TX_FLOW_CTRL BIT(5) +#define PORT_MII_100MBIT BIT(4) +#define PORT_MII_RX_FLOW_CTRL BIT(3) +#define PORT_GRXC_ENABLE BIT(0) + +#define REG_PORT_XMII_CTRL_1 0x0301 +#define PORT_MII_NOT_1GBIT BIT(6) +#define PORT_MII_SEL_EDGE BIT(5) +#define PORT_RGMII_ID_IG_ENABLE BIT(4) +#define PORT_RGMII_ID_EG_ENABLE BIT(3) +#define PORT_MII_MAC_MODE BIT(2) +#define PORT_MII_SEL_M 0x3 +#define PORT_RGMII_SEL 0x0 +#define PORT_RMII_SEL 0x1 +#define PORT_MII_SEL 0x2 + +/* 4 - MAC */ +#define REG_PORT_MAC_CTRL_0 0x0400 +#define PORT_CHECK_LENGTH BIT(2) +#define PORT_BROADCAST_STORM BIT(1) +#define PORT_JUMBO_PACKET BIT(0) + +#define REG_PORT_MAC_CTRL_1 0x0401 +#define PORT_BACK_PRESSURE BIT(3) +#define PORT_PASS_ALL BIT(0) + +#define PORT_MAX_FR_SIZE 0x404 +#define FR_MIN_SIZE 1522 + +/* 8 - Classification and Policing */ +#define REG_PORT_MRI_PRIO_CTRL 0x0801 +#define PORT_HIGHEST_PRIO BIT(7) +#define PORT_OR_PRIO BIT(6) +#define PORT_MAC_PRIO_ENABLE BIT(4) +#define PORT_VLAN_PRIO_ENABLE BIT(3) +#define PORT_802_1P_PRIO_ENABLE BIT(2) +#define PORT_DIFFSERV_PRIO_ENABLE BIT(1) +#define PORT_ACL_PRIO_ENABLE BIT(0) + +#define P_PRIO_CTRL REG_PORT_MRI_PRIO_CTRL + +#define LAN937X_TAG_LEN 2 + +#endif diff --git a/include/net/dsa.h b/include/net/dsa.h index ea7bf007f34f..b902b31bebce 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -54,6 +54,7 @@ struct phylink_link_state; #define DSA_TAG_PROTO_RTL8_4_VALUE 24 #define DSA_TAG_PROTO_RTL8_4T_VALUE 25 #define DSA_TAG_PROTO_RZN1_A5PSW_VALUE 26 +#define DSA_TAG_PROTO_LAN937X_VALUE 27 enum dsa_tag_protocol { DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE, @@ -83,6 +84,7 @@ enum dsa_tag_protocol { DSA_TAG_PROTO_RTL8_4 = DSA_TAG_PROTO_RTL8_4_VALUE, DSA_TAG_PROTO_RTL8_4T = DSA_TAG_PROTO_RTL8_4T_VALUE, DSA_TAG_PROTO_RZN1_A5PSW = DSA_TAG_PROTO_RZN1_A5PSW_VALUE, + DSA_TAG_PROTO_LAN937X = DSA_TAG_PROTO_LAN937X_VALUE, }; struct dsa_switch; diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index 63853fff4e2f..3eef72ce99a4 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -87,10 +87,10 @@ config NET_DSA_TAG_MTK Mediatek switches. config NET_DSA_TAG_KSZ - tristate "Tag driver for Microchip 8795/9477/9893 families of switches" + tristate "Tag driver for Microchip 8795/937x/9477/9893 families of switches" help Say Y if you want to enable support for tagging frames for the - Microchip 8795/9477/9893 families of switches. + Microchip 8795/937x/9477/9893 families of switches. config NET_DSA_TAG_OCELOT tristate "Tag driver for Ocelot family of switches, using NPI port" diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c index 3509fc967ca9..38fa19c1e2d5 100644 --- a/net/dsa/tag_ksz.c +++ b/net/dsa/tag_ksz.c @@ -193,10 +193,69 @@ static const struct dsa_device_ops ksz9893_netdev_ops = { DSA_TAG_DRIVER(ksz9893_netdev_ops); MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ9893); +/* For xmit, 2 bytes are added before FCS. + * --------------------------------------------------------------------------- + * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|tag1(1byte)|FCS(4bytes) + * --------------------------------------------------------------------------- + * tag0 : represents tag override, lookup and valid + * tag1 : each bit represents port (eg, 0x01=port1, 0x02=port2, 0x80=port8) + * + * For rcv, 1 byte is added before FCS. + * --------------------------------------------------------------------------- + * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|FCS(4bytes) + * --------------------------------------------------------------------------- + * tag0 : zero-based value represents port + * (eg, 0x00=port1, 0x02=port3, 0x07=port8) + */ +#define LAN937X_EGRESS_TAG_LEN 2 + +#define LAN937X_TAIL_TAG_BLOCKING_OVERRIDE BIT(11) +#define LAN937X_TAIL_TAG_LOOKUP BIT(12) +#define LAN937X_TAIL_TAG_VALID BIT(13) +#define LAN937X_TAIL_TAG_PORT_MASK 7 + +static struct sk_buff *lan937x_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct dsa_port *dp = dsa_slave_to_port(dev); + const struct ethhdr *hdr = eth_hdr(skb); + __be16 *tag; + u16 val; + + if (skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_help(skb)) + return NULL; + + tag = skb_put(skb, LAN937X_EGRESS_TAG_LEN); + + val = BIT(dp->index); + + if (is_link_local_ether_addr(hdr->h_dest)) + val |= LAN937X_TAIL_TAG_BLOCKING_OVERRIDE; + + /* Tail tag valid bit - This bit should always be set by the CPU */ + val |= LAN937X_TAIL_TAG_VALID; + + put_unaligned_be16(val, tag); + + return skb; +} + +static const struct dsa_device_ops lan937x_netdev_ops = { + .name = "lan937x", + .proto = DSA_TAG_PROTO_LAN937X, + .xmit = lan937x_xmit, + .rcv = ksz9477_rcv, + .needed_tailroom = LAN937X_EGRESS_TAG_LEN, +}; + +DSA_TAG_DRIVER(lan937x_netdev_ops); +MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_LAN937X); + static struct dsa_tag_driver *dsa_tag_driver_array[] = { &DSA_TAG_DRIVER_NAME(ksz8795_netdev_ops), &DSA_TAG_DRIVER_NAME(ksz9477_netdev_ops), &DSA_TAG_DRIVER_NAME(ksz9893_netdev_ops), + &DSA_TAG_DRIVER_NAME(lan937x_netdev_ops), }; module_dsa_tag_drivers(dsa_tag_driver_array); |