summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts12
-rw-r--r--drivers/input/joystick/Kconfig1
-rw-r--r--drivers/input/mouse/elan_i2c_core.c9
-rw-r--r--drivers/input/mouse/synaptics.c1
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h7
-rw-r--r--drivers/input/touchscreen/elants_i2c.c1
-rw-r--r--include/linux/input/elan-i2c-ids.h7
-rw-r--r--include/linux/mod_devicetable.h2
-rw-r--r--include/uapi/linux/input-event-codes.h3
9 files changed, 32 insertions, 11 deletions
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4089d97405c9..3dbcae3d60d2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -105,6 +105,14 @@
linux,code = <SW_FRONT_PROXIMITY>;
linux,can-disable;
};
+
+ machine_cover {
+ label = "Machine Cover";
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
+ linux,can-disable;
+ };
};
isp1707: isp1707 {
@@ -819,10 +827,6 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
- /* For debugging, it is often good idea to remove this GPIO.
- It means you can remove back cover (to reboot by removing
- battery) and still use the MMC card. */
- cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
};
/* most boards use vaux3, only some old versions use vmmc2 instead */
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 940b744639c7..6f73f02059b5 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -45,6 +45,7 @@ config JOYSTICK_A3D
config JOYSTICK_ADI
tristate "Logitech ADI digital joysticks and gamepads"
select GAMEPORT
+ depends on ADI!=m # avoid module name conflict
help
Say Y here if you have a Logitech controller using the ADI
protocol over the PC gameport.
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 4b6e2dffc0ea..8a0f224da423 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -997,6 +997,8 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet,
u8 hover_info = packet[ETP_HOVER_INFO_OFFSET];
bool contact_valid, hover_event;
+ pm_wakeup_event(&data->client->dev, 0);
+
hover_event = hover_info & BIT(6);
for (i = 0; i < ETP_MAX_FINGERS; i++) {
@@ -1021,6 +1023,8 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report)
u8 *packet = &report[ETP_REPORT_ID_OFFSET + 1];
int x, y;
+ pm_wakeup_event(&data->client->dev, 0);
+
if (!data->tp_input) {
dev_warn_once(&data->client->dev,
"received a trackpoint report while no trackpoint device has been created. Please report upstream.\n");
@@ -1045,7 +1049,6 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report)
static irqreturn_t elan_isr(int irq, void *dev_id)
{
struct elan_tp_data *data = dev_id;
- struct device *dev = &data->client->dev;
int error;
u8 report[ETP_MAX_REPORT_LEN];
@@ -1063,8 +1066,6 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
if (error)
goto out;
- pm_wakeup_event(dev, 0);
-
switch (report[ETP_REPORT_ID_OFFSET]) {
case ETP_REPORT_ID:
elan_report_absolute(data, report, false);
@@ -1076,7 +1077,7 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
elan_report_trackpoint(data, report);
break;
default:
- dev_err(dev, "invalid report id data (%x)\n",
+ dev_err(&data->client->dev, "invalid report id data (%x)\n",
report[ETP_REPORT_ID_OFFSET]);
}
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 758dae8d6500..4b81b2d0fe06 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -179,6 +179,7 @@ static const char * const smbus_pnp_ids[] = {
"LEN0093", /* T480 */
"LEN0096", /* X280 */
"LEN0097", /* X280 -> ALPS trackpoint */
+ "LEN0099", /* X1 Extreme 1st */
"LEN009b", /* T580 */
"LEN200f", /* T450s */
"LEN2044", /* L470 */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 7b08ff8ddf35..7d7f73702726 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -426,6 +426,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
},
},
{
+ /* Lenovo XiaoXin Air 12 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "80UN"),
+ },
+ },
+ {
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"),
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index a765aa876a8e..b0bd5bb079be 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -1325,7 +1325,6 @@ static int elants_i2c_probe(struct i2c_client *client,
0, MT_TOOL_PALM, 0, 0);
input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
- input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
touchscreen_parse_properties(ts->input, true, &ts->prop);
diff --git a/include/linux/input/elan-i2c-ids.h b/include/linux/input/elan-i2c-ids.h
index 1ecb6b45812c..520858d12680 100644
--- a/include/linux/input/elan-i2c-ids.h
+++ b/include/linux/input/elan-i2c-ids.h
@@ -67,8 +67,15 @@ static const struct acpi_device_id elan_acpi_id[] = {
{ "ELAN062B", 0 },
{ "ELAN062C", 0 },
{ "ELAN062D", 0 },
+ { "ELAN062E", 0 }, /* Lenovo V340 Whiskey Lake U */
+ { "ELAN062F", 0 }, /* Lenovo V340 Comet Lake U */
{ "ELAN0631", 0 },
{ "ELAN0632", 0 },
+ { "ELAN0633", 0 }, /* Lenovo S145 */
+ { "ELAN0634", 0 }, /* Lenovo V340 Ice lake */
+ { "ELAN0635", 0 }, /* Lenovo V1415-IIL */
+ { "ELAN0636", 0 }, /* Lenovo V1415-Dali */
+ { "ELAN0637", 0 }, /* Lenovo V1415-IGLR */
{ "ELAN1000", 0 },
{ }
};
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 4c2ddd0941a7..498827b2c9f7 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -318,7 +318,7 @@ struct pcmcia_device_id {
#define INPUT_DEVICE_ID_LED_MAX 0x0f
#define INPUT_DEVICE_ID_SND_MAX 0x07
#define INPUT_DEVICE_ID_FF_MAX 0x7f
-#define INPUT_DEVICE_ID_SW_MAX 0x0f
+#define INPUT_DEVICE_ID_SW_MAX 0x10
#define INPUT_DEVICE_ID_PROP_MAX 0x1f
#define INPUT_DEVICE_ID_MATCH_BUS 1
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index b6a835d37826..0c2e27d28e0a 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -888,7 +888,8 @@
#define SW_LINEIN_INSERT 0x0d /* set = inserted */
#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_PEN_INSERTED 0x0f /* set = pen inserted */
-#define SW_MAX 0x0f
+#define SW_MACHINE_COVER 0x10 /* set = cover closed */
+#define SW_MAX 0x10
#define SW_CNT (SW_MAX+1)
/*
generated by cgit (git 2.34.1) at 2024-06-11 17:08:01 +0000