2 files changed, 128 insertions, 12 deletions

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 7f0c49c2b09d..4576395aaeb0 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -156,6 +156,75 @@ static const char *phylink_an_mode_str(unsigned int mode)
 }
 
 /**
+ * phylink_interface_max_speed() - get the maximum speed of a phy interface
+ * @interface: phy interface mode defined by &typedef phy_interface_t
+ *
+ * Determine the maximum speed of a phy interface. This is intended to help
+ * determine the correct speed to pass to the MAC when the phy is performing
+ * rate matching.
+ *
+ * Return: The maximum speed of @interface
+ */
+static int phylink_interface_max_speed(phy_interface_t interface)
+{
+	switch (interface) {
+	case PHY_INTERFACE_MODE_100BASEX:
+	case PHY_INTERFACE_MODE_REVRMII:
+	case PHY_INTERFACE_MODE_RMII:
+	case PHY_INTERFACE_MODE_SMII:
+	case PHY_INTERFACE_MODE_REVMII:
+	case PHY_INTERFACE_MODE_MII:
+		return SPEED_100;
+
+	case PHY_INTERFACE_MODE_TBI:
+	case PHY_INTERFACE_MODE_MOCA:
+	case PHY_INTERFACE_MODE_RTBI:
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_1000BASEKX:
+	case PHY_INTERFACE_MODE_TRGMII:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_GMII:
+		return SPEED_1000;
+
+	case PHY_INTERFACE_MODE_2500BASEX:
+		return SPEED_2500;
+
+	case PHY_INTERFACE_MODE_5GBASER:
+		return SPEED_5000;
+
+	case PHY_INTERFACE_MODE_XGMII:
+	case PHY_INTERFACE_MODE_RXAUI:
+	case PHY_INTERFACE_MODE_XAUI:
+	case PHY_INTERFACE_MODE_10GBASER:
+	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_USXGMII:
+	case PHY_INTERFACE_MODE_QUSGMII:
+		return SPEED_10000;
+
+	case PHY_INTERFACE_MODE_25GBASER:
+		return SPEED_25000;
+
+	case PHY_INTERFACE_MODE_XLGMII:
+		return SPEED_40000;
+
+	case PHY_INTERFACE_MODE_INTERNAL:
+	case PHY_INTERFACE_MODE_NA:
+	case PHY_INTERFACE_MODE_MAX:
+		/* No idea! Garbage in, unknown out */
+		return SPEED_UNKNOWN;
+	}
+
+	/* If we get here, someone forgot to add an interface mode above */
+	WARN_ON_ONCE(1);
+	return SPEED_UNKNOWN;
+}
+
+/**
  * phylink_caps_to_linkmodes() - Convert capabilities to ethtool link modes
  * @linkmodes: ethtool linkmode mask (must be already initialised)
  * @caps: bitmask of MAC capabilities
@@ -791,11 +860,12 @@ static void phylink_mac_config(struct phylink *pl,
 			       const struct phylink_link_state *state)
 {
 	phylink_dbg(pl,
-		    "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
+		    "%s: mode=%s/%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
 		    __func__, phylink_an_mode_str(pl->cur_link_an_mode),
 		    phy_modes(state->interface),
 		    phy_speed_to_str(state->speed),
 		    phy_duplex_to_str(state->duplex),
+		    phy_rate_matching_to_str(state->rate_matching),
 		    __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
 		    state->pause, state->link, state->an_enabled);
 
@@ -932,7 +1002,8 @@ static void phylink_mac_pcs_get_state(struct phylink *pl,
 	linkmode_zero(state->lp_advertising);
 	state->interface = pl->link_config.interface;
 	state->an_enabled = pl->link_config.an_enabled;
-	if  (state->an_enabled) {
+	state->rate_matching = pl->link_config.rate_matching;
+	if (state->an_enabled) {
 		state->speed = SPEED_UNKNOWN;
 		state->duplex = DUPLEX_UNKNOWN;
 		state->pause = MLO_PAUSE_NONE;
@@ -1015,19 +1086,43 @@ static void phylink_link_up(struct phylink *pl,
 			    struct phylink_link_state link_state)
 {
 	struct net_device *ndev = pl->netdev;
+	int speed, duplex;
+	bool rx_pause;
+
+	speed = link_state.speed;
+	duplex = link_state.duplex;
+	rx_pause = !!(link_state.pause & MLO_PAUSE_RX);
+
+	switch (link_state.rate_matching) {
+	case RATE_MATCH_PAUSE:
+		/* The PHY is doing rate matchion from the media rate (in
+		 * the link_state) to the interface speed, and will send
+		 * pause frames to the MAC to limit its transmission speed.
+		 */
+		speed = phylink_interface_max_speed(link_state.interface);
+		duplex = DUPLEX_FULL;
+		rx_pause = true;
+		break;
+
+	case RATE_MATCH_CRS:
+		/* The PHY is doing rate matchion from the media rate (in
+		 * the link_state) to the interface speed, and will cause
+		 * collisions to the MAC to limit its transmission speed.
+		 */
+		speed = phylink_interface_max_speed(link_state.interface);
+		duplex = DUPLEX_HALF;
+		break;
+	}
 
 	pl->cur_interface = link_state.interface;
 
 	if (pl->pcs && pl->pcs->ops->pcs_link_up)
 		pl->pcs->ops->pcs_link_up(pl->pcs, pl->cur_link_an_mode,
-					 pl->cur_interface,
-					 link_state.speed, link_state.duplex);
+					  pl->cur_interface, speed, duplex);
 
-	pl->mac_ops->mac_link_up(pl->config, pl->phydev,
-				 pl->cur_link_an_mode, pl->cur_interface,
-				 link_state.speed, link_state.duplex,
-				 !!(link_state.pause & MLO_PAUSE_TX),
-				 !!(link_state.pause & MLO_PAUSE_RX));
+	pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->cur_link_an_mode,
+				 pl->cur_interface, speed, duplex,
+				 !!(link_state.pause & MLO_PAUSE_TX), rx_pause);
 
 	if (ndev)
 		netif_carrier_on(ndev);
@@ -1119,6 +1214,17 @@ static void phylink_resolve(struct work_struct *w)
 				}
 				link_state.interface = pl->phy_state.interface;
 
+				/* If we are doing rate matching, then the
+				 * link speed/duplex comes from the PHY
+				 */
+				if (pl->phy_state.rate_matching) {
+					link_state.rate_matching =
+						pl->phy_state.rate_matching;
+					link_state.speed = pl->phy_state.speed;
+					link_state.duplex =
+						pl->phy_state.duplex;
+				}
+
 				/* If we have a PHY, we need to update with
 				 * the PHY flow control bits.
 				 */
@@ -1353,6 +1459,7 @@ static void phylink_phy_change(struct phy_device *phydev, bool up)
 	mutex_lock(&pl->state_mutex);
 	pl->phy_state.speed = phydev->speed;
 	pl->phy_state.duplex = phydev->duplex;
+	pl->phy_state.rate_matching = phydev->rate_matching;
 	pl->phy_state.pause = MLO_PAUSE_NONE;
 	if (tx_pause)
 		pl->phy_state.pause |= MLO_PAUSE_TX;
@@ -1364,10 +1471,11 @@ static void phylink_phy_change(struct phy_device *phydev, bool up)
 
 	phylink_run_resolve(pl);
 
-	phylink_dbg(pl, "phy link %s %s/%s/%s/%s\n", up ? "up" : "down",
+	phylink_dbg(pl, "phy link %s %s/%s/%s/%s/%s\n", up ? "up" : "down",
 		    phy_modes(phydev->interface),
 		    phy_speed_to_str(phydev->speed),
 		    phy_duplex_to_str(phydev->duplex),
+		    phy_rate_matching_to_str(phydev->rate_matching),
 		    phylink_pause_to_str(pl->phy_state.pause));
 }
 
@@ -1431,6 +1539,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
 	pl->phy_state.pause = MLO_PAUSE_NONE;
 	pl->phy_state.speed = SPEED_UNKNOWN;
 	pl->phy_state.duplex = DUPLEX_UNKNOWN;
+	pl->phy_state.rate_matching = RATE_MATCH_NONE;
 	linkmode_copy(pl->supported, supported);
 	linkmode_copy(pl->link_config.advertising, config.advertising);
 
@@ -1873,8 +1982,10 @@ static void phylink_get_ksettings(const struct phylink_link_state *state,
 {
 	phylink_merge_link_mode(kset->link_modes.advertising, state->advertising);
 	linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising);
-	kset->base.speed = state->speed;
-	kset->base.duplex = state->duplex;
+	if (kset->base.rate_matching == RATE_MATCH_NONE) {
+		kset->base.speed = state->speed;
+		kset->base.duplex = state->duplex;
+	}
 	kset->base.autoneg = state->an_enabled ? AUTONEG_ENABLE :
 				AUTONEG_DISABLE;
 }
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index cc039ae7e80c..5c99c21e42b5 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -88,6 +88,10 @@ static inline bool phylink_autoneg_inband(unsigned int mode)
  * @speed: link speed, one of the SPEED_* constants.
  * @duplex: link duplex mode, one of DUPLEX_* constants.
  * @pause: link pause state, described by MLO_PAUSE_* constants.
+ * @rate_matching: rate matching being performed, one of the RATE_MATCH_*
+ *   constants. If rate matching is taking place, then the speed/duplex of
+ *   the medium link mode (@speed and @duplex) and the speed/duplex of the phy
+ *   interface mode (@interface) are different.
  * @link: true if the link is up.
  * @an_enabled: true if autonegotiation is enabled/desired.
  * @an_complete: true if autonegotiation has completed.
@@ -99,6 +103,7 @@ struct phylink_link_state {
 	int speed;
 	int duplex;
 	int pause;
+	int rate_matching;
 	unsigned int link:1;
 	unsigned int an_enabled:1;
 	unsigned int an_complete:1;