diff options
46 files changed, 2492 insertions, 562 deletions
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt deleted file mode 100644 index d19885b7c73f..000000000000 --- a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Actions Semi Owl Clock Management Unit (CMU) - -The Actions Semi Owl Clock Management Unit generates and supplies clock -to various controllers within the SoC. The clock binding described here is -applicable to S900, S700 and S500 SoC's. - -Required Properties: - -- compatible: should be one of the following, - "actions,s900-cmu" - "actions,s700-cmu" - "actions,s500-cmu" -- reg: physical base address of the controller and length of memory mapped - region. -- clocks: Reference to the parent clocks ("hosc", "losc") -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Each clock is assigned an identifier, and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in corresponding -dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or -actions,s500-cmu.h header and can be used in device tree sources. - -External clocks: - -The hosc clock used as input for the plls is generated outside the SoC. It is -expected that it is defined using standard clock bindings as "hosc". - -Actions Semi S900 CMU also requires one more clock: - - "losc" - internal low frequency oscillator - -Example: Clock Management Unit node: - - cmu: clock-controller@e0160000 { - compatible = "actions,s900-cmu"; - reg = <0x0 0xe0160000 0x0 0x1000>; - clocks = <&hosc>, <&losc>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes clock generated by the clock -management unit: - - uart: serial@e012a000 { - compatible = "actions,s900-uart", "actions,owl-uart"; - reg = <0x0 0xe012a000 0x0 0x2000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cmu CLK_UART5>; - }; diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.yaml b/Documentation/devicetree/bindings/clock/actions,owl-cmu.yaml new file mode 100644 index 000000000000..28396441bc98 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/actions,owl-cmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi Owl Clock Management Unit (CMU) + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + The Actions Semi Owl Clock Management Unit generates and supplies clock + to various controllers within the SoC. + + See also: + include/dt-bindings/clock/actions,s500-cmu.h + include/dt-bindings/clock/actions,s700-cmu.h + include/dt-bindings/clock/actions,s900-cmu.h + +properties: + compatible: + enum: + - actions,s500-cmu + - actions,s700-cmu + - actions,s900-cmu + + reg: + maxItems: 1 + + clocks: + items: + - description: Host oscillator source + - description: Internal low frequency oscillator source + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clock-controller@e0160000 { + compatible = "actions,s900-cmu"; + reg = <0xe0160000 0x1000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml b/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml deleted file mode 100644 index 2d4f2cde1e58..000000000000 --- a/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml +++ /dev/null @@ -1,51 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/mobileye,eyeq5-clk.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mobileye EyeQ5 clock controller - -description: - The EyeQ5 clock controller handles 10 read-only PLLs derived from the main - crystal clock. It also exposes one divider clock, a child of one of the PLLs. - Its registers live in a shared region called OLB. - -maintainers: - - Grégory Clement <gregory.clement@bootlin.com> - - Théo Lebrun <theo.lebrun@bootlin.com> - - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> - -properties: - compatible: - const: mobileye,eyeq5-clk - - reg: - maxItems: 2 - - reg-names: - items: - - const: plls - - const: ospi - - "#clock-cells": - const: 1 - - clocks: - maxItems: 1 - description: - Input parent clock to all PLLs. Expected to be the main crystal. - - clock-names: - items: - - const: ref - -required: - - compatible - - reg - - reg-names - - "#clock-cells" - - clocks - - clock-names - -additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml new file mode 100644 index 000000000000..3707e4118949 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,r9a08g045-vbattb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Battery Backup Function (VBATTB) + +description: + Renesas VBATTB is an always on powered module (backed by battery) which + controls the RTC clock (VBATTCLK), tamper detection logic and a small + general usage memory (128B). + +maintainers: + - Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> + +properties: + compatible: + const: renesas,r9a08g045-vbattb + + reg: + maxItems: 1 + + interrupts: + items: + - description: tamper detector interrupt + + clocks: + items: + - description: VBATTB module clock + - description: RTC input clock (crystal or external clock device) + + clock-names: + items: + - const: bclk + - const: rtx + + '#clock-cells': + const: 1 + + power-domains: + maxItems: 1 + + resets: + items: + - description: VBATTB module reset + + quartz-load-femtofarads: + description: load capacitance of the on board crystal + enum: [ 4000, 7000, 9000, 12500 ] + default: 4000 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#clock-cells' + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a08g045-cpg.h> + #include <dt-bindings/clock/renesas,r9a08g045-vbattb.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + clock-controller@1005c000 { + compatible = "renesas,r9a08g045-vbattb"; + reg = <0x1005c000 0x1000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>, <&vbattb_xtal>; + clock-names = "bclk", "rtx"; + assigned-clocks = <&vbattb VBATTB_MUX>; + assigned-clock-parents = <&vbattb VBATTB_XC>; + #clock-cells = <1>; + power-domains = <&cpg>; + resets = <&cpg R9A08G045_VBAT_BRESETN>; + quartz-load-femtofarads = <12500>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt deleted file mode 100644 index 904ae682ea90..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Rockchip RK3328 Clock and Reset Unit - -The RK3328 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3328-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "clkin_i2s" - external I2S clock - optional, - - "gmac_clkin" - external GMAC clock - optional - - "phy_50m_out" - output clock of the pll in the mac phy - - "hdmi_phy" - output clock of the hdmi phy pll - optional - -Example: Clock controller node: - - cru: clock-controller@ff440000 { - compatible = "rockchip,rk3328-cru"; - reg = <0x0 0xff440000 0x0 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@ff120000 { - compatible = "snps,dw-apb-uart"; - reg = <0xff120000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.yaml new file mode 100644 index 000000000000..f079c7a2559b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3328-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3328 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3328 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required, + - "clkin_i2s" - external I2S clock - optional, + - "gmac_clkin" - external GMAC clock - optional + - "phy_50m_out" - output clock of the pll in the mac phy + - "hdmi_phy" - output clock of the hdmi phy pll - optional + +properties: + compatible: + enum: + - rockchip,rk3328-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff440000 { + compatible = "rockchip,rk3328-cru"; + reg = <0xff440000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt index 6f7e1331b546..238e6f7d74f8 100644 --- a/Documentation/devicetree/bindings/clock/ti/composite.txt +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt @@ -16,8 +16,8 @@ merged to this clock. The component clocks shall be of one of the "ti,*composite*-clock" types. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/ti/mux.txt -[3] Documentation/devicetree/bindings/clock/ti/divider.txt +[2] Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml +[3] Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml [4] Documentation/devicetree/bindings/clock/ti/gate.txt Required properties: diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt deleted file mode 100644 index 4d7c76f0b356..000000000000 --- a/Documentation/devicetree/bindings/clock/ti/divider.txt +++ /dev/null @@ -1,115 +0,0 @@ -Binding for TI divider clock - -This binding uses the common clock binding[1]. It assumes a -register-mapped adjustable clock rate divider that does not gate and has -only one input clock or parent. By default the value programmed into -the register is one less than the actual divisor value. E.g: - -register value actual divisor value -0 1 -1 2 -2 3 - -This assumption may be modified by the following optional properties: - -ti,index-starts-at-one - valid divisor values start at 1, not the default -of 0. E.g: -register value actual divisor value -1 1 -2 2 -3 3 - -ti,index-power-of-two - valid divisor values are powers of two. E.g: -register value actual divisor value -0 1 -1 2 -2 4 - -Additionally an array of valid dividers may be supplied like so: - - ti,dividers = <4>, <8>, <0>, <16>; - -Which will map the resulting values to a divisor table by their index: -register value actual divisor value -0 4 -1 8 -2 <invalid divisor, skipped> -3 16 - -Any zero value in this array means the corresponding bit-value is invalid -and must not be used. - -The binding must also provide the register to control the divider and -unless the divider array is provided, min and max dividers. Optionally -the number of bits to shift that mask, if necessary. If the shift value -is missing it is the same as supplying a zero shift. - -This binding can also optionally provide support to the hardware autoidle -feature, see [2]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt - -Required properties: -- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : link to phandle of parent clock -- reg : offset for register controlling adjustable divider - -Optional properties: -- clock-output-names : from common clock binding. -- ti,dividers : array of integers defining divisors -- ti,bit-shift : number of bits to shift the divider value, defaults to 0 -- ti,min-div : min divisor for dividing the input clock rate, only - needed if the first divisor is offset from the default value (1) -- ti,max-div : max divisor for dividing the input clock rate, only needed - if ti,dividers is not defined. -- ti,index-starts-at-one : valid divisor programming starts at 1, not zero, - only valid if ti,dividers is not defined. -- ti,index-power-of-two : valid divisor programming must be a power of two, - only valid if ti,dividers is not defined. -- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock, - see [2] -- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0, - see [2] -- ti,set-rate-parent : clk_set_rate is propagated to parent -- ti,latch-bit : latch the divider value to HW, only needed if the register - access requires this. As an example dra76x DPLL_GMAC H14 divider implements - such behavior. - -Examples: -dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll_usb_ck>; - ti,max-div = <127>; - reg = <0x190>; - ti,index-starts-at-one; -}; - -aess_fclk: aess_fclk@4a004528 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&abe_clk>; - ti,bit-shift = <24>; - reg = <0x528>; - ti,max-div = <2>; -}; - -dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&dpll_core_x2_ck>; - ti,max-div = <31>; - reg = <0x0134>; - ti,index-starts-at-one; -}; - -ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <8>; - reg = <0x0a40>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; -}; diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt deleted file mode 100644 index 85fb1f2d2d28..000000000000 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ /dev/null @@ -1,55 +0,0 @@ -Binding for Texas Instruments interface clock. - -This binding uses the common clock binding[1]. This clock is -quite much similar to the basic gate-clock [2], however, -it supports a number of additional features, including -companion clock finding (match corresponding functional gate -clock) and hardware autoidle enable / disable. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml - -Required properties: -- compatible : shall be one of: - "ti,omap3-interface-clock" - basic OMAP3 interface clock - "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware - capability for waiting clock to be ready - "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW - handling - "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling - "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling - "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling - "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW - handling -- #clock-cells : from common clock binding; shall be set to 0 -- clocks : link to phandle of parent clock -- reg : base address for the control register - -Optional properties: -- clock-output-names : from common clock binding. -- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0) - -Examples: - aes1_ick: aes1_ick@48004a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x48004a14 0x4>; - ti,bit-shift = <3>; - }; - - cam_ick: cam_ick@48004f10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&l4_ick>; - reg = <0x48004f10 0x4>; - ti,bit-shift = <0>; - }; - - ssi_ick_3430es2: ssi_ick_3430es2@48004a10 { - #clock-cells = <0>; - compatible = "ti,omap3-ssi-interface-clock"; - clocks = <&ssi_l4_ick>; - reg = <0x48004a10 0x4>; - ti,bit-shift = <0>; - }; diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt deleted file mode 100644 index cd56d3c1c09f..000000000000 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ /dev/null @@ -1,78 +0,0 @@ -Binding for TI mux clock. - -This binding uses the common clock binding[1]. It assumes a -register-mapped multiplexer with multiple input clock signals or -parents, one of which can be selected as output. This clock does not -gate or adjust the parent rate via a divider or multiplier. - -By default the "clocks" property lists the parents in the same order -as they are programmed into the register. E.g: - - clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>; - -results in programming the register as follows: - -register value selected parent clock -0 foo_clock -1 bar_clock -2 baz_clock - -Some clock controller IPs do not allow a value of zero to be programmed -into the register, instead indexing begins at 1. The optional property -"index-starts-at-one" modified the scheme as follows: - -register value selected clock parent -1 foo_clock -2 bar_clock -3 baz_clock - -The binding must provide the register to control the mux. Optionally -the number of bits to shift the control field in the register can be -supplied. If the shift value is missing it is the same as supplying -a zero shift. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : link phandles of parent clocks -- reg : register offset for register controlling adjustable mux - -Optional properties: -- clock-output-names : from common clock binding. -- ti,bit-shift : number of bits to shift the bit-mask, defaults to - 0 if not present -- ti,index-starts-at-one : valid input select programming starts at 1, not - zero -- ti,set-rate-parent : clk_set_rate is propagated to parent clock, - not supported by the composite-mux-clock subtype -- ti,latch-bit : latch the mux value to HW, only needed if the register - access requires this. As an example, dra7x DPLL_GMAC H14 muxing - implements such behavior. - -Examples: - -sys_clkin_ck: sys_clkin_ck@4a306110 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; - reg = <0x0110>; - ti,index-starts-at-one; -}; - -abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x0108>; -}; - -mcbsp5_mux_fck: mcbsp5_mux_fck { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <4>; - reg = <0x02d8>; -}; diff --git a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml new file mode 100644 index 000000000000..3fbe236eb565 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,divider-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments divider clock + +maintainers: + - Tero Kristo <kristo@kernel.org> + +description: | + This clock It assumes a register-mapped adjustable clock rate divider + that does not gate and has only one input clock or parent. By default the + value programmed into the register is one less than the actual divisor value. + E.g: + + register value actual divisor value + 0 1 + 1 2 + 2 3 + + This assumption may be modified by the following optional properties: + + ti,index-starts-at-one - valid divisor values start at 1, not the default + of 0. E.g: + register value actual divisor value + 1 1 + 2 2 + 3 3 + + ti,index-power-of-two - valid divisor values are powers of two. E.g: + register value actual divisor value + 0 1 + 1 2 + 2 4 + + Additionally an array of valid dividers may be supplied like so: + + ti,dividers = <4>, <8>, <0>, <16>; + + Which will map the resulting values to a divisor table by their index: + register value actual divisor value + 0 4 + 1 8 + 2 <invalid divisor, skipped> + 3 16 + + Any zero value in this array means the corresponding bit-value is invalid + and must not be used. + + The binding must also provide the register to control the divider and + unless the divider array is provided, min and max dividers. Optionally + the number of bits to shift that mask, if necessary. If the shift value + is missing it is the same as supplying a zero shift. + + This binding can also optionally provide support to the hardware autoidle + feature, see [1]. + + [1] Documentation/devicetree/bindings/clock/ti/autoidle.txt + +properties: + compatible: + enum: + - ti,divider-clock + - ti,composite-divider-clock + + "#clock-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + + reg: + maxItems: 1 + + ti,dividers: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + array of integers defining divisors + + ti,bit-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + number of bits to shift the divider value + maximum: 31 + default: 0 + + ti,min-div: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + min divisor for dividing the input clock rate, only + needed if the first divisor is offset from the default value (1) + minimum: 1 + default: 1 + + + ti,max-div: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + max divisor for dividing the input clock rate, only needed + if ti,dividers is not defined. + + ti,index-starts-at-one: + type: boolean + description: + valid divisor programming starts at 1, not zero, + only valid if ti,dividers is not defined + + ti,index-power-of-two: + type: boolean + description: + valid divisor programming must be a power of two, + only valid if ti,dividers is not defined. + + ti,autoidle-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + bit shift of the autoidle enable bit for the clock, + see [1]. + maximum: 31 + default: 0 + + ti,invert-autoidle-bit: + type: boolean + description: + autoidle is enabled by setting the bit to 0, + see [1] + + ti,set-rate-parent: + type: boolean + description: + clk_set_rate is propagated to parent | + + ti,latch-bit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + latch the divider value to HW, only needed if the register + compatible access requires this. As an example dra76x DPLL_GMAC + H14 divider implements such behavior. + +dependentSchemas: + ti,dividers: + properties: + ti,min-div: false + ti,max-div: false + ti,index-power-of-two: false + ti,index-starts-at-one: false + +required: + - compatible + - "#clock-cells" + - clocks + - reg + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <1>; + #size-cells = <0>; + + clock-controller@190 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_ck>; + ti,max-div = <127>; + reg = <0x190>; + ti,index-starts-at-one; + }; + + clock-controller@528 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&abe_clk>; + ti,bit-shift = <24>; + reg = <0x528>; + ti,max-div = <2>; + }; + + clock-controller@a40 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + reg = <0x0a40>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml new file mode 100644 index 000000000000..1eaf95d88e0b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,interface-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments interface clock. + +maintainers: + - Tero Kristo <kristo@kernel.org> + +description: | + This clock is quite much similar to the basic gate-clock[1], however, + it supports a number of additional features, including + companion clock finding (match corresponding functional gate + clock) and hardware autoidle enable / disable. + + [1] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml + +properties: + compatible: + enum: + - ti,omap3-interface-clock # basic OMAP3 interface clock + - ti,omap3-no-wait-interface-clock # interface clock which has no hardware + # capability for waiting clock to be ready + - ti,omap3-hsotgusb-interface-clock # interface clock with USB specific HW handling + - ti,omap3-dss-interface-clock # interface clock with DSS specific HW handling + - ti,omap3-ssi-interface-clock # interface clock with SSI specific HW handling + - ti,am35xx-interface-clock # interface clock with AM35xx specific HW handling + - ti,omap2430-interface-clock # interface clock with OMAP2430 specific HW handling + + "#clock-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + + reg: + maxItems: 1 + + ti,bit-shift: + description: + bit shift for the bit enabling/disabling the clock + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + maximum: 31 + +required: + - compatible + - clocks + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <1>; + #size-cells = <0>; + + aes1_ick: clock-controller@3 { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&security_l4_ick2>; + reg = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml new file mode 100644 index 000000000000..485b6aae85d4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,mux-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments mux clock + +maintainers: + - Tero Kristo <kristo@kernel.org> + +description: | + This clock assumes a register-mapped multiplexer with multiple inpt clock + signals or parents, one of which can be selected as output. This clock does + not gate or adjust the parent rate via a divider or multiplier. + + By default the "clocks" property lists the parents in the same order + as they are programmed into the register. E.g: + + clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>; + + Results in programming the register as follows: + + register value selected parent clock + 0 foo_clock + 1 bar_clock + 2 baz_clock + + Some clock controller IPs do not allow a value of zero to be programmed + into the register, instead indexing begins at 1. The optional property + "index-starts-at-one" modified the scheme as follows: + + register value selected clock parent + 1 foo_clock + 2 bar_clock + 3 baz_clock + + The binding must provide the register to control the mux. Optionally + the number of bits to shift the control field in the register can be + supplied. If the shift value is missing it is the same as supplying + a zero shift. + +properties: + compatible: + enum: + - ti,mux-clock + - ti,composite-mux-clock + + "#clock-cells": + const: 0 + + clocks: true + + clock-output-names: + maxItems: 1 + + reg: + maxItems: 1 + + ti,bit-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of bits to shift the bit-mask + maximum: 31 + default: 0 + + ti,index-starts-at-one: + type: boolean + description: + Valid input select programming starts at 1, not zero + + ti,set-rate-parent: + type: boolean + description: + clk_set_rate is propagated to parent clock, + not supported by the composite-mux-clock subtype. + + ti,latch-bit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Latch the mux value to HW, only needed if the register + access requires this. As an example, dra7x DPLL_GMAC H14 muxing + implements such behavior. + maximum: 31 + +if: + properties: + compatible: + contains: + const: ti,composite-mux-clock +then: + properties: + ti,set-rate-parent: false + +required: + - compatible + - "#clock-cells" + - clocks + - reg + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <1>; + #size-cells = <0>; + + clock-controller@110 { + compatible = "ti,mux-clock"; + reg = <0x0110>; + #clock-cells = <0>; + clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>; + ti,index-starts-at-one; + ti,set-rate-parent; + }; + + clock-controller@120 { + compatible = "ti,composite-mux-clock"; + reg = <0x0120>; + #clock-cells = <0>; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml index d82e65e37cc0..72523f1bbc18 100644 --- a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml +++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml @@ -21,6 +21,13 @@ properties: '#reset-cells': const: 2 + '#clock-cells': + const: 1 + + clocks: + items: + - description: specify external 25MHz reference clock. + nuvoton,sysgcr: $ref: /schemas/types.yaml#/definitions/phandle description: a phandle to access GCR registers. @@ -39,6 +46,17 @@ required: - '#reset-cells' - nuvoton,sysgcr +if: + properties: + compatible: + contains: + enum: + - nuvoton,npcm845-reset +then: + required: + - '#clock-cells' + - clocks + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq5-olb.yaml b/Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq5-olb.yaml index f7e606d45ebc..6d11472ba5a7 100644 --- a/Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq5-olb.yaml +++ b/Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq5-olb.yaml @@ -41,9 +41,7 @@ properties: enum: [ 1, 2 ] '#clock-cells': - description: - Cell is clock index. Optional if compatible has a single clock. - enum: [ 0, 1 ] + const: 1 clocks: maxItems: 1 @@ -312,26 +310,6 @@ allOf: properties: '#reset-cells': false - # Compatibles exposing a single clock. - - if: - properties: - compatible: - contains: - enum: - - mobileye,eyeq6h-central-olb - - mobileye,eyeq6h-east-olb - - mobileye,eyeq6h-west-olb - - mobileye,eyeq6h-ddr0-olb - - mobileye,eyeq6h-ddr1-olb - then: - properties: - '#clock-cells': - const: 0 - else: - properties: - '#clock-cells': - const: 1 - # Only EyeQ5 has pinctrl in OLB. - if: not: diff --git a/MAINTAINERS b/MAINTAINERS index 262b23805ab3..0864107d4df2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1996,7 +1996,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-actions@lists.infradead.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/arm/actions.yaml -F: Documentation/devicetree/bindings/clock/actions,owl-cmu.txt +F: Documentation/devicetree/bindings/clock/actions,owl-cmu.yaml F: Documentation/devicetree/bindings/dma/owl-dma.yaml F: Documentation/devicetree/bindings/i2c/i2c-owl.yaml F: Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 84f46b4045b7..713573b6c86c 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -226,6 +226,17 @@ config COMMON_CLK_EP93XX help This driver supports the SoC clocks on the Cirrus Logic ep93xx. +config COMMON_CLK_EYEQ + bool "Clock driver for the Mobileye EyeQ platform" + depends on MACH_EYEQ5 || MACH_EYEQ6H || COMPILE_TEST + select AUXILIARY_BUS + default MACH_EYEQ5 || MACH_EYEQ6H + help + This driver provides clocks found on Mobileye EyeQ5, EyeQ6L and Eye6H + SoCs. Controllers live in shared register regions called OLB. Driver + provides read-only PLLs, derived from the main crystal clock (which + must be constant). It also exposes some divider clocks. + config COMMON_CLK_FSL_FLEXSPI tristate "Clock driver for FlexSPI on Layerscape SoCs" depends on ARCH_LAYERSCAPE || COMPILE_TEST @@ -291,7 +302,7 @@ config CLK_TWL help Enable support for controlling the clock resources on TWL family PMICs. These devices have some 32K clock outputs which can be - controlled by software. For now, only the TWL6032 clocks are + controlled by software. For now, the TWL6032 and TWL6030 clocks are supported. config CLK_TWL6040 @@ -342,6 +353,14 @@ config COMMON_CLK_LOCHNAGAR This driver supports the clocking features of the Cirrus Logic Lochnagar audio development board. +config COMMON_CLK_NPCM8XX + tristate "Clock driver for the NPCM8XX SoC Family" + depends on ARCH_NPCM || COMPILE_TEST + help + This driver supports the clocks on the Nuvoton BMC NPCM8XX SoC Family, + all the clocks are initialized by the bootloader, so this driver + allows only reading of current settings directly from the hardware. + config COMMON_CLK_LOONGSON2 bool "Clock driver for Loongson-2 SoC" depends on LOONGARCH || COMPILE_TEST diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 35c70149259a..bf4bd45adc3a 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o obj-$(CONFIG_COMMON_CLK_EP93XX) += clk-ep93xx.o obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o +obj-$(CONFIG_COMMON_CLK_EYEQ) += clk-eyeq.o obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI) += clk-fsl-flexspi.o obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o @@ -76,6 +77,7 @@ obj-$(CONFIG_ARCH_MILBEAUT_M10V) += clk-milbeaut.o obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_NPCM7XX) += clk-npcm7xx.o +obj-$(CONFIG_COMMON_CLK_NPCM8XX) += clk-npcm8xx.o obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o obj-$(CONFIG_CLK_LS1028A_PLLDIG) += clk-plldig.o diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index a2c2b5203b0a..c1f426b8a504 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -72,6 +72,8 @@ static unsigned int _get_maxdiv(const struct clk_div_table *table, u8 width, return clk_div_mask(width); if (flags & CLK_DIVIDER_POWER_OF_TWO) return 1 << clk_div_mask(width); + if (flags & CLK_DIVIDER_EVEN_INTEGERS) + return 2 * (clk_div_mask(width) + 1); if (table) return _get_table_maxdiv(table, width); return clk_div_mask(width) + 1; @@ -97,6 +99,8 @@ static unsigned int _get_div(const struct clk_div_table *table, return 1 << val; if (flags & CLK_DIVIDER_MAX_AT_ZERO) return val ? val : clk_div_mask(width) + 1; + if (flags & CLK_DIVIDER_EVEN_INTEGERS) + return 2 * (val + 1); if (table) return _get_table_div(table, val); return val + 1; @@ -122,6 +126,8 @@ static unsigned int _get_val(const struct clk_div_table *table, return __ffs(div); if (flags & CLK_DIVIDER_MAX_AT_ZERO) return (div == clk_div_mask(width) + 1) ? 0 : div; + if (flags & CLK_DIVIDER_EVEN_INTEGERS) + return (div >> 1) - 1; if (table) return _get_table_val(table, div); return div - 1; @@ -538,7 +544,8 @@ struct clk_hw *__clk_hw_register_divider(struct device *dev, struct device_node *np, const char *name, const char *parent_name, const struct clk_hw *parent_hw, const struct clk_parent_data *parent_data, unsigned long flags, - void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags, + void __iomem *reg, u8 shift, u8 width, + unsigned long clk_divider_flags, const struct clk_div_table *table, spinlock_t *lock) { struct clk_divider *div; @@ -610,8 +617,8 @@ EXPORT_SYMBOL_GPL(__clk_hw_register_divider); struct clk *clk_register_divider_table(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, - u8 clk_divider_flags, const struct clk_div_table *table, - spinlock_t *lock) + unsigned long clk_divider_flags, + const struct clk_div_table *table, spinlock_t *lock) { struct clk_hw *hw; @@ -664,7 +671,8 @@ struct clk_hw *__devm_clk_hw_register_divider(struct device *dev, struct device_node *np, const char *name, const char *parent_name, const struct clk_hw *parent_hw, const struct clk_parent_data *parent_data, unsigned long flags, - void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags, + void __iomem *reg, u8 shift, u8 width, + unsigned long clk_divider_flags, const struct clk_div_table *table, spinlock_t *lock) { struct clk_hw **ptr, *hw; diff --git a/drivers/clk/clk-eyeq.c b/drivers/clk/clk-eyeq.c new file mode 100644 index 000000000000..640c25788487 --- /dev/null +++ b/drivers/clk/clk-eyeq.c @@ -0,0 +1,859 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PLL clock driver for the Mobileye EyeQ5, EyeQ6L and EyeQ6H platforms. + * + * This controller handles: + * - Read-only PLLs, all derived from the same main crystal clock. + * - It also exposes divider clocks, those are children to PLLs. + * - Fixed factor clocks, children to PLLs. + * + * Parent clock is expected to be constant. This driver's registers live in a + * shared region called OLB. Some PLLs and fixed-factors are initialised early + * by of_clk_init(); if so, two clk providers are registered. + * + * We use eqc_ as prefix, as-in "EyeQ Clock", but way shorter. + * + * Copyright (C) 2024 Mobileye Vision Technologies Ltd. + */ + +/* + * Set pr_fmt() for printing from eqc_early_init(). + * It is called at of_clk_init() stage (read: really early). + */ +#define pr_fmt(fmt) "clk-eyeq: " fmt + +#include <linux/array_size.h> +#include <linux/auxiliary_bus.h> +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io-64-nonatomic-hi-lo.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/overflow.h> +#include <linux/platform_device.h> +#include <linux/printk.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include <dt-bindings/clock/mobileye,eyeq5-clk.h> + +/* In frac mode, it enables fractional noise canceling DAC. Else, no function. */ +#define PCSR0_DAC_EN BIT(0) +/* Fractional or integer mode */ +#define PCSR0_DSM_EN BIT(1) +#define PCSR0_PLL_EN BIT(2) +/* All clocks output held at 0 */ +#define PCSR0_FOUTPOSTDIV_EN BIT(3) +#define PCSR0_POST_DIV1 GENMASK(6, 4) +#define PCSR0_POST_DIV2 GENMASK(9, 7) +#define PCSR0_REF_DIV GENMASK(15, 10) +#define PCSR0_INTIN GENMASK(27, 16) +#define PCSR0_BYPASS BIT(28) +/* Bits 30..29 are reserved */ +#define PCSR0_PLL_LOCKED BIT(31) + +#define PCSR1_RESET BIT(0) +#define PCSR1_SSGC_DIV GENMASK(4, 1) +/* Spread amplitude (% = 0.1 * SPREAD[4:0]) */ +#define PCSR1_SPREAD GENMASK(9, 5) +#define PCSR1_DIS_SSCG BIT(10) +/* Down-spread or center-spread */ +#define PCSR1_DOWN_SPREAD BIT(11) +#define PCSR1_FRAC_IN GENMASK(31, 12) + +struct eqc_pll { + unsigned int index; + const char *name; + unsigned int reg64; +}; + +/* + * Divider clock. Divider is 2*(v+1), with v the register value. + * Min divider is 2, max is 2*(2^width). + */ +struct eqc_div { + unsigned int index; + const char *name; + unsigned int parent; + unsigned int reg; + u8 shift; + u8 width; +}; + +struct eqc_fixed_factor { + unsigned int index; + const char *name; + unsigned int mult; + unsigned int div; + unsigned int parent; +}; + +struct eqc_match_data { + unsigned int pll_count; + const struct eqc_pll *plls; + + unsigned int div_count; + const struct eqc_div *divs; + + unsigned int fixed_factor_count; + const struct eqc_fixed_factor *fixed_factors; + + const char *reset_auxdev_name; + const char *pinctrl_auxdev_name; + + unsigned int early_clk_count; +}; + +struct eqc_early_match_data { + unsigned int early_pll_count; + const struct eqc_pll *early_plls; + + unsigned int early_fixed_factor_count; + const struct eqc_fixed_factor *early_fixed_factors; + + /* + * We want our of_xlate callback to EPROBE_DEFER instead of dev_err() + * and EINVAL. For that, we must know the total clock count. + */ + unsigned int late_clk_count; +}; + +/* + * Both factors (mult and div) must fit in 32 bits. When an operation overflows, + * this function throws away low bits so that factors still fit in 32 bits. + * + * Precision loss depends on amplitude of mult and div. Worst theorical + * loss is: (UINT_MAX+1) / UINT_MAX - 1 = 2.3e-10. + * This is 1Hz every 4.3GHz. + */ +static void eqc_pll_downshift_factors(unsigned long *mult, unsigned long *div) +{ + unsigned long biggest; + unsigned int shift; + + /* This function can be removed if mult/div switch to unsigned long. */ + static_assert(sizeof_field(struct clk_fixed_factor, mult) == sizeof(unsigned int)); + static_assert(sizeof_field(struct clk_fixed_factor, div) == sizeof(unsigned int)); + + /* No overflow, nothing to be done. */ + if (*mult <= UINT_MAX && *div <= UINT_MAX) + return; + + /* + * Compute the shift required to bring the biggest factor into unsigned + * int range. That is, shift its highest set bit to the unsigned int + * most significant bit. + */ + biggest = max(*mult, *div); + shift = __fls(biggest) - (BITS_PER_BYTE * sizeof(unsigned int)) + 1; + + *mult >>= shift; + *div >>= shift; +} + +static int eqc_pll_parse_registers(u32 r0, u32 r1, unsigned long *mult, + unsigned long *div, unsigned long *acc) +{ + u32 spread; + + if (r0 & PCSR0_BYPASS) { + *mult = 1; + *div = 1; + *acc = 0; + return 0; + } + + if (!(r0 & PCSR0_PLL_LOCKED)) + return -EINVAL; + + *mult = FIELD_GET(PCSR0_INTIN, r0); + *div = FIELD_GET(PCSR0_REF_DIV, r0); + if (r0 & PCSR0_FOUTPOSTDIV_EN) + *div *= FIELD_GET(PCSR0_POST_DIV1, r0) * FIELD_GET(PCSR0_POST_DIV2, r0); + + /* Fractional mode, in 2^20 (0x100000) parts. */ + if (r0 & PCSR0_DSM_EN) { + *div *= (1ULL << 20); + *mult = *mult * (1ULL << 20) + FIELD_GET(PCSR1_FRAC_IN, r1); + } + + if (!*mult || !*div) + return -EINVAL; + + if (r1 & (PCSR1_RESET | PCSR1_DIS_SSCG)) { + *acc = 0; + return 0; + } + + /* + * Spread spectrum. + * + * Spread is 1/1000 parts of frequency, accuracy is half of + * that. To get accuracy, convert to ppb (parts per billion). + * + * acc = spread * 1e6 / 2 + * with acc in parts per billion and, + * spread in parts per thousand. + */ + spread = FIELD_GET(PCSR1_SPREAD, r1); + *acc = spread * 500000; + + if (r1 & PCSR1_DOWN_SPREAD) { + /* + * Downspreading: the central frequency is half a + * spread lower. + */ + *mult *= 2000 - spread; + *div *= 2000; + + /* + * Previous operation might overflow 32 bits. If it + * does, throw away the least amount of low bits. + */ + eqc_pll_downshift_factors(mult, div); + } + + return 0; +} + +static void eqc_probe_init_plls(struct device *dev, const struct eqc_match_data *data, + void __iomem *base, struct clk_hw_onecell_data *cells) +{ + unsigned long mult, div, acc; + const struct eqc_pll *pll; + struct clk_hw *hw; + unsigned int i; + u32 r0, r1; + u64 val; + int ret; + + for (i = 0; i < data->pll_count; i++) { + pll = &data->plls[i]; + + val = readq(base + pll->reg64); + r0 = val; + r1 = val >> 32; + + ret = eqc_pll_parse_registers(r0, r1, &mult, &div, &acc); + if (ret) { + dev_warn(dev, "failed parsing state of %s\n", pll->name); + cells->hws[pll->index] = ERR_PTR(ret); + continue; + } + + hw = clk_hw_register_fixed_factor_with_accuracy_fwname(dev, + dev->of_node, pll->name, "ref", 0, mult, div, acc); + cells->hws[pll->index] = hw; + if (IS_ERR(hw)) + dev_warn(dev, "failed registering %s: %pe\n", pll->name, hw); + } +} + +static void eqc_probe_init_divs(struct device *dev, const struct eqc_match_data *data, + void __iomem *base, struct clk_hw_onecell_data *cells) +{ + struct clk_parent_data parent_data = { }; + const struct eqc_div *div; + struct clk_hw *parent; + void __iomem *reg; + struct clk_hw *hw; + unsigned int i; + + for (i = 0; i < data->div_count; i++) { + div = &data->divs[i]; + reg = base + div->reg; + parent = cells->hws[div->parent]; + + if (IS_ERR(parent)) { + /* Parent is in early clk provider. */ + parent_data.index = div->parent; + parent_data.hw = NULL; + } else { + /* Avoid clock lookup when we already have the hw reference. */ + parent_data.index = 0; + parent_data.hw = parent; + } + + hw = clk_hw_register_divider_table_parent_data(dev, div->name, + &parent_data, 0, reg, div->shift, div->width, + CLK_DIVIDER_EVEN_INTEGERS, NULL, NULL); + cells->hws[div->index] = hw; + if (IS_ERR(hw)) + dev_warn(dev, "failed registering %s: %pe\n", + div->name, hw); + } +} + +static void eqc_probe_init_fixed_factors(struct device *dev, + const struct eqc_match_data *data, + struct clk_hw_onecell_data *cells) +{ + const struct eqc_fixed_factor *ff; + struct clk_hw *hw, *parent_hw; + unsigned int i; + + for (i = 0; i < data->fixed_factor_count; i++) { + ff = &data->fixed_factors[i]; + parent_hw = cells->hws[ff->parent]; + + if (IS_ERR(parent_hw)) { + /* Parent is in early clk provider. */ + hw = clk_hw_register_fixed_factor_index(dev, ff->name, + ff->parent, 0, ff->mult, ff->div); + } else { + /* Avoid clock lookup when we already have the hw reference. */ + hw = clk_hw_register_fixed_factor_parent_hw(dev, ff->name, + parent_hw, 0, ff->mult, ff->div); + } + + cells->hws[ff->index] = hw; + if (IS_ERR(hw)) + dev_warn(dev, "failed registering %s: %pe\n", + ff->name, hw); + } +} + +static void eqc_auxdev_release(struct device *dev) +{ + struct auxiliary_device *adev = to_auxiliary_dev(dev); + + kfree(adev); +} + +static int eqc_auxdev_create(struct device *dev, void __iomem *base, + const char *name, u32 id) +{ + struct auxiliary_device *adev; + int ret; + + adev = kzalloc(sizeof(*adev), GFP_KERNEL); + if (!adev) + return -ENOMEM; + + adev->name = name; + adev->dev.parent = dev; + adev->dev.platform_data = (void __force *)base; + adev->dev.release = eqc_auxdev_release; + adev->id = id; + + ret = auxiliary_device_init(adev); + if (ret) + return ret; + + ret = auxiliary_device_add(adev); + if (ret) + auxiliary_device_uninit(adev); + + return ret; +} + +static int eqc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + const struct eqc_match_data *data; + struct clk_hw_onecell_data *cells; + unsigned int i, clk_count; + struct resource *res; + void __iomem *base; + int ret; + + data = device_get_match_data(dev); + if (!data) + return 0; /* No clocks nor auxdevs, we are done. */ + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + base = ioremap(res->start, resource_size(res)); + if (!base) + return -ENOMEM; + + /* Init optional reset auxiliary device. */ + if (data->reset_auxdev_name) { + ret = eqc_auxdev_create(dev, base, data->reset_auxdev_name, 0); + if (ret) + dev_warn(dev, "failed creating auxiliary device %s.%s: %d\n", + KBUILD_MODNAME, data->reset_auxdev_name, ret); + } + + /* Init optional pinctrl auxiliary device. */ + if (data->pinctrl_auxdev_name) { + ret = eqc_auxdev_create(dev, base, data->pinctrl_auxdev_name, 0); + if (ret) + dev_warn(dev, "failed creating auxiliary device %s.%s: %d\n", + KBUILD_MODNAME, data->pinctrl_auxdev_name, ret); + } + + if (data->pll_count + data->div_count + data->fixed_factor_count == 0) + return 0; /* Zero clocks, we are done. */ + + clk_count = data->pll_count + data->div_count + + data->fixed_factor_count + data->early_clk_count; + cells = kzalloc(struct_size(cells, hws, clk_count), GFP_KERNEL); + if (!cells) + return -ENOMEM; + + cells->num = clk_count; + + /* Early PLLs are marked as errors: the early provider will get queried. */ + for (i = 0; i < clk_count; i++) + cells->hws[i] = ERR_PTR(-EINVAL); + + eqc_probe_init_plls(dev, data, base, cells); + + eqc_probe_init_divs(dev, data, base, cells); + + eqc_probe_init_fixed_factors(dev, data, cells); + + return of_clk_add_hw_provider(np, of_clk_hw_onecell_get, cells); +} + +/* Required early for GIC timer (pll-cpu) and UARTs (pll-per). */ +static const struct eqc_pll eqc_eyeq5_early_plls[] = { + { .index = EQ5C_PLL_CPU, .name = "pll-cpu", .reg64 = 0x02C }, + { .index = EQ5C_PLL_PER, .name = "pll-per", .reg64 = 0x05C }, +}; + +static const struct eqc_pll eqc_eyeq5_plls[] = { + { .index = EQ5C_PLL_VMP, .name = "pll-vmp", .reg64 = 0x034 }, + { .index = EQ5C_PLL_PMA, .name = "pll-pma", .reg64 = 0x03C }, + { .index = EQ5C_PLL_VDI, .name = "pll-vdi", .reg64 = 0x044 }, + { .index = EQ5C_PLL_DDR0, .name = "pll-ddr0", .reg64 = 0x04C }, + { .index = EQ5C_PLL_PCI, .name = "pll-pci", .reg64 = 0x054 }, + { .index = EQ5C_PLL_PMAC, .name = "pll-pmac", .reg64 = 0x064 }, + { .index = EQ5C_PLL_MPC, .name = "pll-mpc", .reg64 = 0x06C }, + { .index = EQ5C_PLL_DDR1, .name = "pll-ddr1", .reg64 = 0x074 }, +}; + +enum { + /* + * EQ5C_PLL_CPU children. + * EQ5C_PER_OCC_PCI is the last clock exposed in dt-bindings. + */ + EQ5C_CPU_OCC = EQ5C_PER_OCC_PCI + 1, + EQ5C_CPU_SI_CSS0, + EQ5C_CPU_CPC, + EQ5C_CPU_CM, + EQ5C_CPU_MEM, + EQ5C_CPU_OCC_ISRAM, + EQ5C_CPU_ISRAM, + EQ5C_CPU_OCC_DBU, + EQ5C_CPU_SI_DBU_TP, + + /* + * EQ5C_PLL_VDI children. + */ + EQ5C_VDI_OCC_VDI, + EQ5C_VDI_VDI, + EQ5C_VDI_OCC_CAN_SER, + EQ5C_VDI_CAN_SER, + EQ5C_VDI_I2C_SER, + + /* + * EQ5C_PLL_PER children. + */ + EQ5C_PER_PERIPH, + EQ5C_PER_CAN, + EQ5C_PER_TIMER, + EQ5C_PER_CCF, + EQ5C_PER_OCC_MJPEG, + EQ5C_PER_HSM, + EQ5C_PER_MJPEG, + EQ5C_PER_FCMU_A, +}; + +static const struct eqc_fixed_factor eqc_eyeq5_early_fixed_factors[] = { + /* EQ5C_PLL_CPU children */ + { EQ5C_CPU_OCC, "occ-cpu", 1, 1, EQ5C_PLL_CPU }, + { EQ5C_CPU_SI_CSS0, "si-css0", 1, 1, EQ5C_CPU_OCC }, + { EQ5C_CPU_CORE0, "core0", 1, 1, EQ5C_CPU_SI_CSS0 }, + { EQ5C_CPU_CORE1, "core1", 1, 1, EQ5C_CPU_SI_CSS0 }, + { EQ5C_CPU_CORE2, "core2", 1, 1, EQ5C_CPU_SI_CSS0 }, + { EQ5C_CPU_CORE3, "core3", 1, 1, EQ5C_CPU_SI_CSS0 }, + + /* EQ5C_PLL_PER children */ + { EQ5C_PER_OCC, "occ-periph", 1, 16, EQ5C_PLL_PER }, + { EQ5C_PER_UART, "uart", 1, 1, EQ5C_PER_OCC }, +}; + +static const struct eqc_fixed_factor eqc_eyeq5_fixed_factors[] = { + /* EQ5C_PLL_CPU children */ + { EQ5C_CPU_CPC, "cpc", 1, 1, EQ5C_CPU_SI_CSS0 }, + { EQ5C_CPU_CM, "cm", 1, 1, EQ5C_CPU_SI_CSS0 }, + { EQ5C_CPU_MEM, "mem", 1, 1, EQ5C_CPU_SI_CSS0 }, + { EQ5C_CPU_OCC_ISRAM, "occ-isram", 1, 2, EQ5C_PLL_CPU }, + { EQ5C_CPU_ISRAM, "isram", 1, 1, EQ5C_CPU_OCC_ISRAM }, + { EQ5C_CPU_OCC_DBU, "occ-dbu", 1, 10, EQ5C_PLL_CPU }, + { EQ5C_CPU_SI_DBU_TP, "si-dbu-tp", 1, 1, EQ5C_CPU_OCC_DBU }, + + /* EQ5C_PLL_VDI children */ + { EQ5C_VDI_OCC_VDI, "occ-vdi", 1, 2, EQ5C_PLL_VDI }, + { EQ5C_VDI_VDI, "vdi", 1, 1, EQ5C_VDI_OCC_VDI }, + { EQ5C_VDI_OCC_CAN_SER, "occ-can-ser", 1, 16, EQ5C_PLL_VDI }, + { EQ5C_VDI_CAN_SER, "can-ser", 1, 1, EQ5C_VDI_OCC_CAN_SER }, + { EQ5C_VDI_I2C_SER, "i2c-ser", 1, 20, EQ5C_PLL_VDI }, + + /* EQ5C_PLL_PER children */ + { EQ5C_PER_PERIPH, "periph", 1, 1, EQ5C_PER_OCC }, + { EQ5C_PER_CAN, "can", 1, 1, EQ5C_PER_OCC }, + { EQ5C_PER_SPI, "spi", 1, 1, EQ5C_PER_OCC }, + { EQ5C_PER_I2C, "i2c", 1, 1, EQ5C_PER_OCC }, + { EQ5C_PER_TIMER, "timer", 1, 1, EQ5C_PER_OCC }, + { EQ5C_PER_GPIO, "gpio", 1, 1, EQ5C_PER_OCC }, + { EQ5C_PER_EMMC, "emmc-sys", 1, 10, EQ5C_PLL_PER }, + { EQ5C_PER_CCF, "ccf-ctrl", 1, 4, EQ5C_PLL_PER }, + { EQ5C_PER_OCC_MJPEG, "occ-mjpeg", 1, 2, EQ5C_PLL_PER }, + { EQ5C_PER_HSM, "hsm", 1, 1, EQ5C_PER_OCC_MJPEG }, + { EQ5C_PER_MJPEG, "mjpeg", 1, 1, EQ5C_PER_OCC_MJPEG }, + { EQ5C_PER_FCMU_A, "fcmu-a", 1, 20, EQ5C_PLL_PER }, + { EQ5C_PER_OCC_PCI, "occ-pci-sys", 1, 8, EQ5C_PLL_PER }, +}; + +static const struct eqc_div eqc_eyeq5_divs[] = { + { + .index = EQ5C_DIV_OSPI, + .name = "div-ospi", + .parent = EQ5C_PLL_PER, + .reg = 0x11C, + .shift = 0, + .width = 4, + }, +}; + +static const struct eqc_early_match_data eqc_eyeq5_early_match_data __initconst = { + .early_pll_count = ARRAY_SIZE(eqc_eyeq5_early_plls), + .early_plls = eqc_eyeq5_early_plls, + + .early_fixed_factor_count = ARRAY_SIZE(eqc_eyeq5_early_fixed_factors), + .early_fixed_factors = eqc_eyeq5_early_fixed_factors, + + .late_clk_count = ARRAY_SIZE(eqc_eyeq5_plls) + ARRAY_SIZE(eqc_eyeq5_divs) + + ARRAY_SIZE(eqc_eyeq5_fixed_factors), +}; + +static const struct eqc_match_data eqc_eyeq5_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq5_plls), + .plls = eqc_eyeq5_plls, + + .div_count = ARRAY_SIZE(eqc_eyeq5_divs), + .divs = eqc_eyeq5_divs, + + .fixed_factor_count = ARRAY_SIZE(eqc_eyeq5_fixed_factors), + .fixed_factors = eqc_eyeq5_fixed_factors, + + .reset_auxdev_name = "reset", + .pinctrl_auxdev_name = "pinctrl", + + .early_clk_count = ARRAY_SIZE(eqc_eyeq5_early_plls) + + ARRAY_SIZE(eqc_eyeq5_early_fixed_factors), +}; + +static const struct eqc_pll eqc_eyeq6l_plls[] = { + { .index = EQ6LC_PLL_DDR, .name = "pll-ddr", .reg64 = 0x02C }, + { .index = EQ6LC_PLL_CPU, .name = "pll-cpu", .reg64 = 0x034 }, /* also acc */ + { .index = EQ6LC_PLL_PER, .name = "pll-per", .reg64 = 0x03C }, + { .index = EQ6LC_PLL_VDI, .name = "pll-vdi", .reg64 = 0x044 }, +}; + +static const struct eqc_match_data eqc_eyeq6l_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6l_plls), + .plls = eqc_eyeq6l_plls, + + .reset_auxdev_name = "reset", +}; + +static const struct eqc_match_data eqc_eyeq6h_west_match_data = { + .reset_auxdev_name = "reset_west", +}; + +static const struct eqc_pll eqc_eyeq6h_east_plls[] = { + { .index = 0, .name = "pll-east", .reg64 = 0x074 }, +}; + +static const struct eqc_match_data eqc_eyeq6h_east_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_east_plls), + .plls = eqc_eyeq6h_east_plls, + + .reset_auxdev_name = "reset_east", +}; + +static const struct eqc_pll eqc_eyeq6h_south_plls[] = { + { .index = EQ6HC_SOUTH_PLL_VDI, .name = "pll-vdi", .reg64 = 0x000 }, + { .index = EQ6HC_SOUTH_PLL_PCIE, .name = "pll-pcie", .reg64 = 0x008 }, + { .index = EQ6HC_SOUTH_PLL_PER, .name = "pll-per", .reg64 = 0x010 }, + { .index = EQ6HC_SOUTH_PLL_ISP, .name = "pll-isp", .reg64 = 0x018 }, +}; + +static const struct eqc_div eqc_eyeq6h_south_divs[] = { + { + .index = EQ6HC_SOUTH_DIV_EMMC, + .name = "div-emmc", + .parent = EQ6HC_SOUTH_PLL_PER, + .reg = 0x070, + .shift = 4, + .width = 4, + }, + { + .index = EQ6HC_SOUTH_DIV_OSPI_REF, + .name = "div-ospi-ref", + .parent = EQ6HC_SOUTH_PLL_PER, + .reg = 0x090, + .shift = 4, + .width = 4, + }, + { + .index = EQ6HC_SOUTH_DIV_OSPI_SYS, + .name = "div-ospi-sys", + .parent = EQ6HC_SOUTH_PLL_PER, + .reg = 0x090, + .shift = 8, + .width = 1, + }, + { + .index = EQ6HC_SOUTH_DIV_TSU, + .name = "div-tsu", + .parent = EQ6HC_SOUTH_PLL_PCIE, + .reg = 0x098, + .shift = 4, + .width = 8, + }, +}; + +static const struct eqc_match_data eqc_eyeq6h_south_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_south_plls), + .plls = eqc_eyeq6h_south_plls, + + .div_count = ARRAY_SIZE(eqc_eyeq6h_south_divs), + .divs = eqc_eyeq6h_south_divs, +}; + +static const struct eqc_pll eqc_eyeq6h_ddr0_plls[] = { + { .index = 0, .name = "pll-ddr0", .reg64 = 0x074 }, +}; + +static const struct eqc_match_data eqc_eyeq6h_ddr0_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_ddr0_plls), + .plls = eqc_eyeq6h_ddr0_plls, +}; + +static const struct eqc_pll eqc_eyeq6h_ddr1_plls[] = { + { .index = 0, .name = "pll-ddr1", .reg64 = 0x074 }, +}; + +static const struct eqc_match_data eqc_eyeq6h_ddr1_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_ddr1_plls), + .plls = eqc_eyeq6h_ddr1_plls, +}; + +static const struct eqc_pll eqc_eyeq6h_acc_plls[] = { + { .index = EQ6HC_ACC_PLL_XNN, .name = "pll-xnn", .reg64 = 0x040 }, + { .index = EQ6HC_ACC_PLL_VMP, .name = "pll-vmp", .reg64 = 0x050 }, + { .index = EQ6HC_ACC_PLL_PMA, .name = "pll-pma", .reg64 = 0x05C }, + { .index = EQ6HC_ACC_PLL_MPC, .name = "pll-mpc", .reg64 = 0x068 }, + { .index = EQ6HC_ACC_PLL_NOC, .name = "pll-noc", .reg64 = 0x070 }, +}; + +static const struct eqc_match_data eqc_eyeq6h_acc_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_acc_plls), + .plls = eqc_eyeq6h_acc_plls, + + .reset_auxdev_name = "reset_acc", +}; + +static const struct of_device_id eqc_match_table[] = { + { .compatible = "mobileye,eyeq5-olb", .data = &eqc_eyeq5_match_data }, + { .compatible = "mobileye,eyeq6l-olb", .data = &eqc_eyeq6l_match_data }, + { .compatible = "mobileye,eyeq6h-west-olb", .data = &eqc_eyeq6h_west_match_data }, + { .compatible = "mobileye,eyeq6h-east-olb", .data = &eqc_eyeq6h_east_match_data }, + { .compatible = "mobileye,eyeq6h-south-olb", .data = &eqc_eyeq6h_south_match_data }, + { .compatible = "mobileye,eyeq6h-ddr0-olb", .data = &eqc_eyeq6h_ddr0_match_data }, + { .compatible = "mobileye,eyeq6h-ddr1-olb", .data = &eqc_eyeq6h_ddr1_match_data }, + { .compatible = "mobileye,eyeq6h-acc-olb", .data = &eqc_eyeq6h_acc_match_data }, + {} +}; + +static struct platform_driver eqc_driver = { + .probe = eqc_probe, + .driver = { + .name = "clk-eyeq", + .of_match_table = eqc_match_table, + .suppress_bind_attrs = true, + }, +}; +builtin_platform_driver(eqc_driver); + +/* Required early for GIC timer. */ +static const struct eqc_pll eqc_eyeq6h_central_early_plls[] = { + { .index = EQ6HC_CENTRAL_PLL_CPU, .name = "pll-cpu", .reg64 = 0x02C }, +}; + +static const struct eqc_fixed_factor eqc_eyeq6h_central_early_fixed_factors[] = { + { EQ6HC_CENTRAL_CPU_OCC, "occ-cpu", 1, 1, EQ6HC_CENTRAL_PLL_CPU }, +}; + +static const struct eqc_early_match_data eqc_eyeq6h_central_early_match_data __initconst = { + .early_pll_count = ARRAY_SIZE(eqc_eyeq6h_central_early_plls), + .early_plls = eqc_eyeq6h_central_early_plls, + + .early_fixed_factor_count = ARRAY_SIZE(eqc_eyeq6h_central_early_fixed_factors), + .early_fixed_factors = eqc_eyeq6h_central_early_fixed_factors, +}; + +/* Required early for UART. */ +static const struct eqc_pll eqc_eyeq6h_west_early_plls[] = { + { .index = EQ6HC_WEST_PLL_PER, .name = "pll-west", .reg64 = 0x074 }, +}; + +static const struct eqc_fixed_factor eqc_eyeq6h_west_early_fixed_factors[] = { + { EQ6HC_WEST_PER_OCC, "west-per-occ", 1, 10, EQ6HC_WEST_PLL_PER }, + { EQ6HC_WEST_PER_UART, "west-per-uart", 1, 1, EQ6HC_WEST_PER_OCC }, +}; + +static const struct eqc_early_match_data eqc_eyeq6h_west_early_match_data __initconst = { + .early_pll_count = ARRAY_SIZE(eqc_eyeq6h_west_early_plls), + .early_plls = eqc_eyeq6h_west_early_plls, + + .early_fixed_factor_count = ARRAY_SIZE(eqc_eyeq6h_west_early_fixed_factors), + .early_fixed_factors = eqc_eyeq6h_west_early_fixed_factors, +}; + +static void __init eqc_early_init(struct device_node *np, + const struct eqc_early_match_data *early_data) +{ + struct clk_hw_onecell_data *cells; + unsigned int i, clk_count; + void __iomem *base; + int ret; + + clk_count = early_data->early_pll_count + early_data->early_fixed_factor_count + + early_data->late_clk_count; + cells = kzalloc(struct_size(cells, hws, clk_count), GFP_KERNEL); + if (!cells) { + ret = -ENOMEM; + goto err; + } + + cells->num = clk_count; + + /* + * Mark all clocks as deferred; some are registered here, the rest at + * platform device probe. + * + * Once the platform device is probed, its provider will take priority + * when looking up clocks. + */ + for (i = 0; i < clk_count; i++) + cells->hws[i] = ERR_PTR(-EPROBE_DEFER); + + /* Offsets (reg64) of early PLLs are relative to OLB block. */ + base = of_iomap(np, 0); + if (!base) { + ret = -ENODEV; + goto err; + } + + for (i = 0; i < early_data->early_pll_count; i++) { + const struct eqc_pll *pll = &early_data->early_plls[i]; + unsigned long mult, div, acc; + struct clk_hw *hw; + u32 r0, r1; + u64 val; + + val = readq(base + pll->reg64); + r0 = val; + r1 = val >> 32; + + ret = eqc_pll_parse_registers(r0, r1, &mult, &div, &acc); + if (ret) { + pr_err("failed parsing state of %s\n", pll->name); + goto err; + } + + hw = clk_hw_register_fixed_factor_with_accuracy_fwname(NULL, + np, pll->name, "ref", 0, mult, div, acc); + cells->hws[pll->index] = hw; + if (IS_ERR(hw)) { + pr_err("failed registering %s: %pe\n", pll->name, hw); + ret = PTR_ERR(hw); + goto err; + } + } + + for (i = 0; i < early_data->early_fixed_factor_count; i++) { + const struct eqc_fixed_factor *ff = &early_data->early_fixed_factors[i]; + struct clk_hw *parent_hw = cells->hws[ff->parent]; + struct clk_hw *hw; + + hw = clk_hw_register_fixed_factor_parent_hw(NULL, ff->name, + parent_hw, 0, ff->mult, ff->div); + cells->hws[ff->index] = hw; + if (IS_ERR(hw)) { + pr_err("failed registering %s: %pe\n", ff->name, hw); + ret = PTR_ERR(hw); + goto err; + } + } + + ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, cells); + if (ret) { + pr_err("failed registering clk provider: %d\n", ret); + goto err; + } + + return; + +err: + /* + * We are doomed. The system will not be able to boot. + * + * Let's still try to be good citizens by freeing resources and print + * a last error message that might help debugging. + */ + + pr_err("failed clk init: %d\n", ret); + + if (cells) { + of_clk_del_provider(np); + + for (i = 0; i < early_data->early_pll_count; i++) { + const struct eqc_pll *pll = &early_data->early_plls[i]; + struct clk_hw *hw = cells->hws[pll->index]; + + if (!IS_ERR_OR_NULL(hw)) + clk_hw_unregister_fixed_factor(hw); + } + + kfree(cells); + } +} + +static void __init eqc_eyeq5_early_init(struct device_node *np) +{ + eqc_early_init(np, &eqc_eyeq5_early_match_data); +} +CLK_OF_DECLARE_DRIVER(eqc_eyeq5, "mobileye,eyeq5-olb", eqc_eyeq5_early_init); + +static void __init eqc_eyeq6h_central_early_init(struct device_node *np) +{ + eqc_early_init(np, &eqc_eyeq6h_central_early_match_data); +} +CLK_OF_DECLARE_DRIVER(eqc_eyeq6h_central, "mobileye,eyeq6h-central-olb", + eqc_eyeq6h_central_early_init); + +static void __init eqc_eyeq6h_west_early_init(struct device_node *np) +{ + eqc_early_init(np, &eqc_eyeq6h_west_early_match_data); +} +CLK_OF_DECLARE_DRIVER(eqc_eyeq6h_west, "mobileye,eyeq6h-west-olb", + eqc_eyeq6h_west_early_init); diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c index 8fba63fc70c5..e62ae8794d44 100644 --- a/drivers/clk/clk-fixed-factor.c +++ b/drivers/clk/clk-fixed-factor.c @@ -241,6 +241,17 @@ struct clk_hw *clk_hw_register_fixed_factor_with_accuracy_fwname(struct device * } EXPORT_SYMBOL_GPL(clk_hw_register_fixed_factor_with_accuracy_fwname); +struct clk_hw *clk_hw_register_fixed_factor_index(struct device *dev, + const char *name, unsigned int index, unsigned long flags, + unsigned int mult, unsigned int div) +{ + const struct clk_parent_data pdata = { .index = index }; + + return __clk_hw_register_fixed_factor(dev, NULL, name, NULL, NULL, &pdata, + flags, mult, div, 0, 0, false); +} +EXPORT_SYMBOL_GPL(clk_hw_register_fixed_factor_index); + struct clk *clk_register_fixed_factor(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned int mult, unsigned int div) diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c new file mode 100644 index 000000000000..2138c011411d --- /dev/null +++ b/drivers/clk/clk-npcm8xx.c @@ -0,0 +1,430 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Nuvoton NPCM8xx Clock Generator + * All the clocks are initialized by the bootloader, so this driver allows only + * reading of current settings directly from the hardware. + * + * Copyright (C) 2020 Nuvoton Technologies + * Author: Tomer Maimon <tomer.maimon@nuvoton.com> + */ + +#define pr_fmt(fmt) "npcm8xx_clk: " fmt + +#include <linux/auxiliary_bus.h> +#include <linux/bitfield.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <dt-bindings/clock/nuvoton,npcm845-clk.h> +#include <soc/nuvoton/clock-npcm8xx.h> + +/* npcm8xx clock registers*/ +#define NPCM8XX_CLKSEL 0x04 +#define NPCM8XX_CLKDIV1 0x08 +#define NPCM8XX_CLKDIV2 0x2C +#define NPCM8XX_CLKDIV3 0x58 +#define NPCM8XX_CLKDIV4 0x7C +#define NPCM8XX_PLLCON0 0x0C +#define NPCM8XX_PLLCON1 0x10 +#define NPCM8XX_PLLCON2 0x54 +#define NPCM8XX_PLLCONG 0x60 +#define NPCM8XX_THRTL_CNT 0xC0 + +#define PLLCON_LOKI BIT(31) +#define PLLCON_LOKS BIT(30) +#define PLLCON_FBDV GENMASK(27, 16) +#define PLLCON_OTDV2 GENMASK(15, 13) +#define PLLCON_PWDEN BIT(12) +#define PLLCON_OTDV1 GENMASK(10, 8) +#define PLLCON_INDV GENMASK(5, 0) + +static void __iomem *clk_base; + +struct npcm8xx_clk_pll { + void __iomem *pllcon; + unsigned int id; + const char *name; + unsigned long flags; + struct clk_hw hw; +}; + +#define to_npcm8xx_clk_pll(_hw) container_of(_hw, struct npcm8xx_clk_pll, hw) + +struct npcm8xx_clk_pll_data { + const char *name; + struct clk_parent_data parent; + unsigned int reg; + unsigned long flags; + struct clk_hw hw; +}; + +struct npcm8xx_clk_div_data { + u32 reg; + u8 shift; + u8 width; + const char *name; + const struct clk_hw *parent_hw; + unsigned long clk_divider_flags; + unsigned long flags; + int onecell_idx; + struct clk_hw hw; +}; + +struct npcm8xx_clk_mux_data { + u8 shift; + u32 mask; + const u32 *table; + const char *name; + const struct clk_parent_data *parent_data; + u8 num_parents; + unsigned long flags; + struct clk_hw hw; +}; + +static struct clk_hw hw_pll1_div2, hw_pll2_div2, hw_gfx_div2, hw_pre_clk; +static struct npcm8xx_clk_pll_data npcm8xx_pll_clks[] = { + { "pll0", { .index = 0 }, NPCM8XX_PLLCON0, 0 }, + { "pll1", { .index = 0 }, NPCM8XX_PLLCON1, 0 }, + { "pll2", { .index = 0 }, NPCM8XX_PLLCON2, 0 }, + { "pll_gfx", { .index = 0 }, NPCM8XX_PLLCONG, 0 }, +}; + +static const u32 cpuck_mux_table[] = { 0, 1, 2, 7 }; +static const struct clk_parent_data cpuck_mux_parents[] = { + { .hw = &npcm8xx_pll_clks[0].hw }, + { .hw = &npcm8xx_pll_clks[1].hw }, + { .index = 0 }, + { .hw = &npcm8xx_pll_clks[2].hw } +}; + +static const u32 pixcksel_mux_table[] = { 0, 2 }; +static const struct clk_parent_data pixcksel_mux_parents[] = { + { .hw = &npcm8xx_pll_clks[3].hw }, + { .index = 0 } +}; + +static const u32 default_mux_table[] = { 0, 1, 2, 3 }; +static const struct clk_parent_data default_mux_parents[] = { + { .hw = &npcm8xx_pll_clks[0].hw }, + { .hw = &npcm8xx_pll_clks[1].hw }, + { .index = 0 }, + { .hw = &hw_pll2_div2 } +}; + +static const u32 sucksel_mux_table[] = { 2, 3 }; +static const struct clk_parent_data sucksel_mux_parents[] = { + { .index = 0 }, + { .hw = &hw_pll2_div2 } +}; + +static const u32 mccksel_mux_table[] = { 0, 2 }; +static const struct clk_parent_data mccksel_mux_parents[] = { + { .hw = &hw_pll1_div2 }, + { .index = 0 } +}; + +static const u32 clkoutsel_mux_table[] = { 0, 1, 2, 3, 4 }; +static const struct clk_parent_data clkoutsel_mux_parents[] = { + { .hw = &npcm8xx_pll_clks[0].hw }, + { .hw = &npcm8xx_pll_clks[1].hw }, + { .index = 0 }, + { .hw = &hw_gfx_div2 }, + { .hw = &hw_pll2_div2 } +}; + +static const u32 gfxmsel_mux_table[] = { 2, 3 }; +static const struct clk_parent_data gfxmsel_mux_parents[] = { + { .index = 0 }, + { .hw = &npcm8xx_pll_clks[2].hw } +}; + +static const u32 dvcssel_mux_table[] = { 2, 3 }; +static const struct clk_parent_data dvcssel_mux_parents[] = { + { .index = 0 }, + { .hw = &npcm8xx_pll_clks[2].hw } +}; + +static const u32 default3_mux_table[] = { 0, 1, 2 }; +static const struct clk_parent_data default3_mux_parents[] = { + { .hw = &npcm8xx_pll_clks[0].hw }, + { .hw = &npcm8xx_pll_clks[1].hw }, + { .index = 0 } +}; + +static struct npcm8xx_clk_mux_data npcm8xx_muxes[] = { + { 0, 3, cpuck_mux_table, "cpu_mux", cpuck_mux_parents, + ARRAY_SIZE(cpuck_mux_parents), CLK_IS_CRITICAL }, + { 4, 2, pixcksel_mux_table, "gfx_pixel_mux", pixcksel_mux_parents, + ARRAY_SIZE(pixcksel_mux_parents), 0 }, + { 6, 2, default_mux_table, "sd_mux", default_mux_parents, + ARRAY_SIZE(default_mux_parents), 0 }, + { 8, 2, default_mux_table, "uart_mux", default_mux_parents, + ARRAY_SIZE(default_mux_parents), 0 }, + { 10, 2, sucksel_mux_table, "serial_usb_mux", sucksel_mux_parents, + ARRAY_SIZE(sucksel_mux_parents), 0 }, + { 12, 2, mccksel_mux_table, "mc_mux", mccksel_mux_parents, + ARRAY_SIZE(mccksel_mux_parents), 0 }, + { 14, 2, default_mux_table, "adc_mux", default_mux_parents, + ARRAY_SIZE(default_mux_parents), 0 }, + { 16, 2, default_mux_table, "gfx_mux", default_mux_parents, + ARRAY_SIZE(default_mux_parents), 0 }, + { 18, 3, clkoutsel_mux_table, "clkout_mux", clkoutsel_mux_parents, + ARRAY_SIZE(clkoutsel_mux_parents), 0 }, + { 21, 2, gfxmsel_mux_table, "gfxm_mux", gfxmsel_mux_parents, + ARRAY_SIZE(gfxmsel_mux_parents), 0 }, + { 23, 2, dvcssel_mux_table, "dvc_mux", dvcssel_mux_parents, + ARRAY_SIZE(dvcssel_mux_parents), 0 }, + { 25, 2, default3_mux_table, "rg_mux", default3_mux_parents, + ARRAY_SIZE(default3_mux_parents), 0 }, + { 27, 2, default3_mux_table, "rcp_mux", default3_mux_parents, + ARRAY_SIZE(default3_mux_parents), 0 }, +}; + +/* configurable pre dividers: */ +static struct npcm8xx_clk_div_data npcm8xx_pre_divs[] = { + { NPCM8XX_CLKDIV1, 21, 5, "pre_adc", &npcm8xx_muxes[6].hw, CLK_DIVIDER_READ_ONLY, 0, -1 }, + { NPCM8XX_CLKDIV1, 26, 2, "ahb", &hw_pre_clk, CLK_DIVIDER_READ_ONLY, CLK_IS_CRITICAL, NPCM8XX_CLK_AHB }, +}; + +/* configurable dividers: */ +static struct npcm8xx_clk_div_data npcm8xx_divs[] = { + { NPCM8XX_CLKDIV1, 28, 3, "adc", &npcm8xx_pre_divs[0].hw, CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_ADC }, + { NPCM8XX_CLKDIV1, 16, 5, "uart", &npcm8xx_muxes[3].hw, 0, 0, NPCM8XX_CLK_UART }, + { NPCM8XX_CLKDIV1, 11, 5, "mmc", &npcm8xx_muxes[2].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_MMC }, + { NPCM8XX_CLKDIV1, 6, 5, "spi3", &npcm8xx_pre_divs[1].hw, 0, 0, NPCM8XX_CLK_SPI3 }, + { NPCM8XX_CLKDIV1, 2, 4, "pci", &npcm8xx_muxes[7].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_PCI }, + + { NPCM8XX_CLKDIV2, 30, 2, "apb4", &npcm8xx_pre_divs[1].hw, CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB4 }, + { NPCM8XX_CLKDIV2, 28, 2, "apb3", &npcm8xx_pre_divs[1].hw, CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB3 }, + { NPCM8XX_CLKDIV2, 26, 2, "apb2", &npcm8xx_pre_divs[1].hw, CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB2 }, + { NPCM8XX_CLKDIV2, 24, 2, "apb1", &npcm8xx_pre_divs[1].hw, CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB1 }, + { NPCM8XX_CLKDIV2, 22, 2, "apb5", &npcm8xx_pre_divs[1].hw, CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB5 }, + { NPCM8XX_CLKDIV2, 16, 5, "clkout", &npcm8xx_muxes[8].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_CLKOUT }, + { NPCM8XX_CLKDIV2, 13, 3, "gfx", &npcm8xx_muxes[7].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_GFX }, + { NPCM8XX_CLKDIV2, 8, 5, "usb_bridge", &npcm8xx_muxes[4].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SU }, + { NPCM8XX_CLKDIV2, 4, 4, "usb_host", &npcm8xx_muxes[4].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SU48 }, + { NPCM8XX_CLKDIV2, 0, 4, "sdhc", &npcm8xx_muxes[2].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SDHC }, + + { NPCM8XX_CLKDIV3, 16, 8, "spi1", &npcm8xx_pre_divs[1].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPI1 }, + { NPCM8XX_CLKDIV3, 11, 5, "uart2", &npcm8xx_muxes[3].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_UART2 }, + { NPCM8XX_CLKDIV3, 6, 5, "spi0", &npcm8xx_pre_divs[1].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPI0 }, + { NPCM8XX_CLKDIV3, 1, 5, "spix", &npcm8xx_pre_divs[1].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPIX }, + + { NPCM8XX_CLKDIV4, 28, 4, "rg", &npcm8xx_muxes[11].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_RG }, + { NPCM8XX_CLKDIV4, 12, 4, "rcp", &npcm8xx_muxes[12].hw, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_RCP }, + + { NPCM8XX_THRTL_CNT, 0, 2, "th", &npcm8xx_muxes[0].hw, CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_TH }, +}; + +static unsigned long npcm8xx_clk_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct npcm8xx_clk_pll *pll = to_npcm8xx_clk_pll(hw); + unsigned long fbdv, indv, otdv1, otdv2; + unsigned int val; + u64 ret; + + if (parent_rate == 0) { + pr_debug("%s: parent rate is zero\n", __func__); + return 0; + } + + val = readl_relaxed(pll->pllcon); + + indv = FIELD_GET(PLLCON_INDV, val); + fbdv = FIELD_GET(PLLCON_FBDV, val); + otdv1 = FIELD_GET(PLLCON_OTDV1, val); + otdv2 = FIELD_GET(PLLCON_OTDV2, val); + + ret = (u64)parent_rate * fbdv; + do_div(ret, indv * otdv1 * otdv2); + + return ret; +} + +static const struct clk_ops npcm8xx_clk_pll_ops = { + .recalc_rate = npcm8xx_clk_pll_recalc_rate, +}; + +static struct clk_hw * +npcm8xx_clk_register_pll(struct device *dev, void __iomem *pllcon, + const char *name, const struct clk_parent_data *parent, + unsigned long flags) +{ + struct npcm8xx_clk_pll *pll; + struct clk_init_data init = {}; + int ret; + + pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &npcm8xx_clk_pll_ops; + init.parent_data = parent; + init.num_parents = 1; + init.flags = flags; + + pll->pllcon = pllcon; + pll->hw.init = &init; + + ret = devm_clk_hw_register(dev, &pll->hw); + if (ret) + return ERR_PTR(ret); + + return &pll->hw; +} + +static DEFINE_SPINLOCK(npcm8xx_clk_lock); + +static int npcm8xx_clk_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct npcm_clock_adev *rdev = to_npcm_clock_adev(adev); + struct clk_hw_onecell_data *npcm8xx_clk_data; + struct device *dev = &adev->dev; + struct clk_hw *hw; + unsigned int i; + + npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws, + NPCM8XX_NUM_CLOCKS), + GFP_KERNEL); + if (!npcm8xx_clk_data) + return -ENOMEM; + + clk_base = rdev->base; + + npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS; + + for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++) + npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER); + + /* Register plls */ + for (i = 0; i < ARRAY_SIZE(npcm8xx_pll_clks); i++) { + struct npcm8xx_clk_pll_data *pll_clk = &npcm8xx_pll_clks[i]; + + hw = npcm8xx_clk_register_pll(dev, clk_base + pll_clk->reg, + pll_clk->name, &pll_clk->parent, + pll_clk->flags); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register pll\n"); + pll_clk->hw = *hw; + } + + /* Register fixed dividers */ + hw = devm_clk_hw_register_fixed_factor(dev, "pll1_div2", "pll1", 0, 1, 2); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register fixed div\n"); + hw_pll1_div2 = *hw; + + hw = devm_clk_hw_register_fixed_factor(dev, "pll2_div2", "pll2", 0, 1, 2); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register pll2 div2\n"); + hw_pll2_div2 = *hw; + + hw = devm_clk_hw_register_fixed_factor(dev, "pll_gfx_div2", "pll_gfx", 0, 1, 2); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register gfx div2\n"); + hw_gfx_div2 = *hw; + + /* Register muxes */ + for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) { + struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i]; + + hw = devm_clk_hw_register_mux_parent_data_table(dev, + mux_data->name, + mux_data->parent_data, + mux_data->num_parents, + mux_data->flags, + clk_base + NPCM8XX_CLKSEL, + mux_data->shift, + mux_data->mask, + 0, + mux_data->table, + &npcm8xx_clk_lock); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register mux\n"); + mux_data->hw = *hw; + } + + hw = devm_clk_hw_register_fixed_factor(dev, "pre_clk", "cpu_mux", 0, 1, 2); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register pre clk div2\n"); + hw_pre_clk = *hw; + + hw = devm_clk_hw_register_fixed_factor(dev, "axi", "th", 0, 1, 2); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register axi div2\n"); + npcm8xx_clk_data->hws[NPCM8XX_CLK_AXI] = hw; + + hw = devm_clk_hw_register_fixed_factor(dev, "atb", "axi", 0, 1, 2); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register atb div2\n"); + npcm8xx_clk_data->hws[NPCM8XX_CLK_ATB] = hw; + + /* Register pre dividers */ + for (i = 0; i < ARRAY_SIZE(npcm8xx_pre_divs); i++) { + struct npcm8xx_clk_div_data *div_data = &npcm8xx_pre_divs[i]; + + hw = devm_clk_hw_register_divider_parent_hw(dev, div_data->name, + div_data->parent_hw, + div_data->flags, + clk_base + div_data->reg, + div_data->shift, + div_data->width, + div_data->clk_divider_flags, + &npcm8xx_clk_lock); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register pre div\n"); + div_data->hw = *hw; + + if (div_data->onecell_idx >= 0) + npcm8xx_clk_data->hws[div_data->onecell_idx] = hw; + } + + /* Register dividers */ + for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) { + struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i]; + + hw = devm_clk_hw_register_divider_parent_hw(dev, div_data->name, + div_data->parent_hw, + div_data->flags, + clk_base + div_data->reg, + div_data->shift, + div_data->width, + div_data->clk_divider_flags, + &npcm8xx_clk_lock); + if (IS_ERR(hw)) + return dev_err_probe(dev, PTR_ERR(hw), "Can't register div\n"); + + if (div_data->onecell_idx >= 0) + npcm8xx_clk_data->hws[div_data->onecell_idx] = hw; + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + npcm8xx_clk_data); +} + +static const struct auxiliary_device_id npcm8xx_clock_ids[] = { + { + .name = "reset_npcm.clk-npcm8xx", + }, + { } +}; +MODULE_DEVICE_TABLE(auxiliary, npcm8xx_clock_ids); + +static struct auxiliary_driver npcm8xx_clock_driver = { + .probe = npcm8xx_clk_probe, + .id_table = npcm8xx_clock_ids, +}; +module_auxiliary_driver(npcm8xx_clock_driver); + +MODULE_DESCRIPTION("Clock driver for Nuvoton NPCM8XX BMC SoC"); +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>"); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/clk/clk-twl.c b/drivers/clk/clk-twl.c index eab9d3c8ed8a..20bc3bf8fd62 100644 --- a/drivers/clk/clk-twl.c +++ b/drivers/clk/clk-twl.c @@ -11,13 +11,29 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#define VREG_STATE 2 +#define VREG_STATE 2 +#define VREG_GRP 0 #define TWL6030_CFG_STATE_OFF 0x00 #define TWL6030_CFG_STATE_ON 0x01 #define TWL6030_CFG_STATE_MASK 0x03 +#define TWL6030_CFG_STATE_GRP_SHIFT 5 +#define TWL6030_CFG_STATE_APP_SHIFT 2 +#define TWL6030_CFG_STATE_APP_MASK (0x03 << TWL6030_CFG_STATE_APP_SHIFT) +#define TWL6030_CFG_STATE_APP(v) (((v) & TWL6030_CFG_STATE_APP_MASK) >>\ + TWL6030_CFG_STATE_APP_SHIFT) +#define P1_GRP BIT(0) /* processor power group */ +#define P2_GRP BIT(1) +#define P3_GRP BIT(2) +#define ALL_GRP (P1_GRP | P2_GRP | P3_GRP) + +enum twl_type { + TWL_TYPE_6030, + TWL_TYPE_6032, +}; struct twl_clock_info { struct device *dev; + enum twl_type type; u8 base; struct clk_hw hw; }; @@ -56,14 +72,21 @@ static unsigned long twl_clks_recalc_rate(struct clk_hw *hw, static int twl6032_clks_prepare(struct clk_hw *hw) { struct twl_clock_info *cinfo = to_twl_clks_info(hw); - int ret; - ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE, - TWL6030_CFG_STATE_ON); - if (ret < 0) - dev_err(cinfo->dev, "clk prepare failed\n"); + if (cinfo->type == TWL_TYPE_6030) { + int grp; + + grp = twlclk_read(cinfo, TWL_MODULE_PM_RECEIVER, VREG_GRP); + if (grp < 0) + return grp; - return ret; + return twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE, + grp << TWL6030_CFG_STATE_GRP_SHIFT | + TWL6030_CFG_STATE_ON); + } + + return twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE, + TWL6030_CFG_STATE_ON); } static void twl6032_clks_unprepare(struct clk_hw *hw) @@ -71,32 +94,21 @@ static void twl6032_clks_unprepare(struct clk_hw *hw) struct twl_clock_info *cinfo = to_twl_clks_info(hw); int ret; - ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE, - TWL6030_CFG_STATE_OFF); + if (cinfo->type == TWL_TYPE_6030) + ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE, + ALL_GRP << TWL6030_CFG_STATE_GRP_SHIFT | + TWL6030_CFG_STATE_OFF); + else + ret = twlclk_write(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE, + TWL6030_CFG_STATE_OFF); + if (ret < 0) dev_err(cinfo->dev, "clk unprepare failed\n"); } -static int twl6032_clks_is_prepared(struct clk_hw *hw) -{ - struct twl_clock_info *cinfo = to_twl_clks_info(hw); - int val; - - val = twlclk_read(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE); - if (val < 0) { - dev_err(cinfo->dev, "clk read failed\n"); - return val; - } - - val &= TWL6030_CFG_STATE_MASK; - - return val == TWL6030_CFG_STATE_ON; -} - static const struct clk_ops twl6032_clks_ops = { .prepare = twl6032_clks_prepare, .unprepare = twl6032_clks_unprepare, - .is_prepared = twl6032_clks_is_prepared, .recalc_rate = twl_clks_recalc_rate, }; @@ -155,6 +167,7 @@ static int twl_clks_probe(struct platform_device *pdev) for (i = 0; i < count; i++) { cinfo[i].base = hw_data[i].base; cinfo[i].dev = &pdev->dev; + cinfo[i].type = platform_get_device_id(pdev)->driver_data; cinfo[i].hw.init = &hw_data[i].init; ret = devm_clk_hw_register(&pdev->dev, &cinfo[i].hw); if (ret) { @@ -176,7 +189,11 @@ static int twl_clks_probe(struct platform_device *pdev) static const struct platform_device_id twl_clks_id[] = { { + .name = "twl6030-clk", + .driver_data = TWL_TYPE_6030, + }, { .name = "twl6032-clk", + .driver_data = TWL_TYPE_6032, }, { /* sentinel */ } diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig index 76791a1c50ac..ff01f5f0ed20 100644 --- a/drivers/clk/renesas/Kconfig +++ b/drivers/clk/renesas/Kconfig @@ -237,6 +237,11 @@ config CLK_RZV2H bool "RZ/V2H(P) family clock support" if COMPILE_TEST select RESET_CONTROLLER +config CLK_RENESAS_VBATTB + tristate "Renesas VBATTB clock controller" + depends on ARCH_RZG2L || COMPILE_TEST + select RESET_CONTROLLER + # Generic config CLK_RENESAS_CPG_MSSR bool "CPG/MSSR clock support" if COMPILE_TEST diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile index 23d2e26051c8..82efaa835ac7 100644 --- a/drivers/clk/renesas/Makefile +++ b/drivers/clk/renesas/Makefile @@ -53,3 +53,4 @@ obj-$(CONFIG_CLK_RZV2H) += rzv2h-cpg.o obj-$(CONFIG_CLK_RENESAS_CPG_MSSR) += renesas-cpg-mssr.o obj-$(CONFIG_CLK_RENESAS_CPG_MSTP) += clk-mstp.o obj-$(CONFIG_CLK_RENESAS_DIV6) += clk-div6.o +obj-$(CONFIG_CLK_RENESAS_VBATTB) += clk-vbattb.o diff --git a/drivers/clk/renesas/clk-r8a73a4.c b/drivers/clk/renesas/clk-r8a73a4.c index 4b1815147f77..f331d8bc9daf 100644 --- a/drivers/clk/renesas/clk-r8a73a4.c +++ b/drivers/clk/renesas/clk-r8a73a4.c @@ -64,7 +64,6 @@ r8a73a4_cpg_register_clock(struct device_node *np, struct r8a73a4_cpg *cpg, unsigned int mult = 1; unsigned int div = 1; - if (!strcmp(name, "main")) { u32 ckscr = readl(base + CPG_CKSCR); diff --git a/drivers/clk/renesas/clk-r8a7778.c b/drivers/clk/renesas/clk-r8a7778.c index 797556259370..6ea173f22251 100644 --- a/drivers/clk/renesas/clk-r8a7778.c +++ b/drivers/clk/renesas/clk-r8a7778.c @@ -67,7 +67,6 @@ r8a7778_cpg_register_clock(struct device_node *np, const char *name) return ERR_PTR(-EINVAL); } - static void __init r8a7778_cpg_clocks_init(struct device_node *np) { struct clk_onecell_data *data; diff --git a/drivers/clk/renesas/clk-vbattb.c b/drivers/clk/renesas/clk-vbattb.c new file mode 100644 index 000000000000..ff9d1ead455c --- /dev/null +++ b/drivers/clk/renesas/clk-vbattb.c @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * VBATTB clock driver + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +#include <linux/cleanup.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> + +#include <dt-bindings/clock/renesas,r9a08g045-vbattb.h> + +#define VBATTB_BKSCCR 0x1c +#define VBATTB_BKSCCR_SOSEL 6 +#define VBATTB_SOSCCR2 0x24 +#define VBATTB_SOSCCR2_SOSTP2 0 +#define VBATTB_XOSCCR 0x30 +#define VBATTB_XOSCCR_OUTEN 16 +#define VBATTB_XOSCCR_XSEL GENMASK(1, 0) +#define VBATTB_XOSCCR_XSEL_4_PF 0x0 +#define VBATTB_XOSCCR_XSEL_7_PF 0x1 +#define VBATTB_XOSCCR_XSEL_9_PF 0x2 +#define VBATTB_XOSCCR_XSEL_12_5_PF 0x3 + +/** + * struct vbattb_clk - VBATTB clock data structure + * @base: base address + * @lock: lock + */ +struct vbattb_clk { + void __iomem *base; + spinlock_t lock; +}; + +static int vbattb_clk_validate_load_capacitance(u32 *reg_lc, u32 of_lc) +{ + switch (of_lc) { + case 4000: + *reg_lc = VBATTB_XOSCCR_XSEL_4_PF; + break; + case 7000: + *reg_lc = VBATTB_XOSCCR_XSEL_7_PF; + break; + case 9000: + *reg_lc = VBATTB_XOSCCR_XSEL_9_PF; + break; + case 12500: + *reg_lc = VBATTB_XOSCCR_XSEL_12_5_PF; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void vbattb_clk_action(void *data) +{ + struct device *dev = data; + struct reset_control *rstc = dev_get_drvdata(dev); + int ret; + + ret = reset_control_assert(rstc); + if (ret) + dev_err(dev, "Failed to de-assert reset!"); + + ret = pm_runtime_put_sync(dev); + if (ret < 0) + dev_err(dev, "Failed to runtime suspend!"); + + of_clk_del_provider(dev->of_node); +} + +static int vbattb_clk_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct clk_parent_data parent_data = {}; + struct clk_hw_onecell_data *clk_data; + const struct clk_hw *parent_hws[2]; + struct device *dev = &pdev->dev; + struct reset_control *rstc; + struct vbattb_clk *vbclk; + u32 of_lc, reg_lc; + struct clk_hw *hw; + /* 4 clocks are exported: VBATTB_XC, VBATTB_XBYP, VBATTB_MUX, VBATTB_VBATTCLK. */ + u8 num_clks = 4; + int ret; + + /* Default to 4pF as this is not needed if external clock device is connected. */ + of_lc = 4000; + of_property_read_u32(np, "quartz-load-femtofarads", &of_lc); + + ret = vbattb_clk_validate_load_capacitance(®_lc, of_lc); + if (ret) + return ret; + + vbclk = devm_kzalloc(dev, sizeof(*vbclk), GFP_KERNEL); + if (!vbclk) + return -ENOMEM; + + clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, num_clks), GFP_KERNEL); + if (!clk_data) + return -ENOMEM; + clk_data->num = num_clks; + + vbclk->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(vbclk->base)) + return PTR_ERR(vbclk->base); + + ret = devm_pm_runtime_enable(dev); + if (ret) + return ret; + + rstc = devm_reset_control_get_shared(dev, NULL); + if (IS_ERR(rstc)) + return PTR_ERR(rstc); + + ret = pm_runtime_resume_and_get(dev); + if (ret) + return ret; + + ret = reset_control_deassert(rstc); + if (ret) { + pm_runtime_put_sync(dev); + return ret; + } + + dev_set_drvdata(dev, rstc); + ret = devm_add_action_or_reset(dev, vbattb_clk_action, dev); + if (ret) + return ret; + + spin_lock_init(&vbclk->lock); + + parent_data.fw_name = "rtx"; + hw = devm_clk_hw_register_gate_parent_data(dev, "xc", &parent_data, 0, + vbclk->base + VBATTB_SOSCCR2, + VBATTB_SOSCCR2_SOSTP2, + CLK_GATE_SET_TO_DISABLE, &vbclk->lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + clk_data->hws[VBATTB_XC] = hw; + + hw = devm_clk_hw_register_fixed_factor_fwname(dev, np, "xbyp", "rtx", 0, 1, 1); + if (IS_ERR(hw)) + return PTR_ERR(hw); + clk_data->hws[VBATTB_XBYP] = hw; + + parent_hws[0] = clk_data->hws[VBATTB_XC]; + parent_hws[1] = clk_data->hws[VBATTB_XBYP]; + hw = devm_clk_hw_register_mux_parent_hws(dev, "mux", parent_hws, 2, 0, + vbclk->base + VBATTB_BKSCCR, + VBATTB_BKSCCR_SOSEL, + 1, 0, &vbclk->lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + clk_data->hws[VBATTB_MUX] = hw; + + /* Set load capacitance before registering the VBATTCLK clock. */ + scoped_guard(spinlock, &vbclk->lock) { + u32 val = readl_relaxed(vbclk->base + VBATTB_XOSCCR); + + val &= ~VBATTB_XOSCCR_XSEL; + val |= reg_lc; + writel_relaxed(val, vbclk->base + VBATTB_XOSCCR); + } + + /* This feeds the RTC counter clock and it needs to stay on. */ + hw = devm_clk_hw_register_gate_parent_hw(dev, "vbattclk", hw, CLK_IS_CRITICAL, + vbclk->base + VBATTB_XOSCCR, + VBATTB_XOSCCR_OUTEN, 0, + &vbclk->lock); + + if (IS_ERR(hw)) + return PTR_ERR(hw); + clk_data->hws[VBATTB_VBATTCLK] = hw; + + return of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data); +} + +static const struct of_device_id vbattb_clk_match[] = { + { .compatible = "renesas,r9a08g045-vbattb" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, vbattb_clk_match); + +static struct platform_driver vbattb_clk_driver = { + .driver = { + .name = "renesas-vbattb-clk", + .of_match_table = vbattb_clk_match, + }, + .probe = vbattb_clk_probe, +}; +module_platform_driver(vbattb_clk_driver); + +MODULE_DESCRIPTION("Renesas VBATTB Clock Driver"); +MODULE_AUTHOR("Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/renesas/r8a779a0-cpg-mssr.c b/drivers/clk/renesas/r8a779a0-cpg-mssr.c index 4c8e4c69c1bf..9c7e4094705c 100644 --- a/drivers/clk/renesas/r8a779a0-cpg-mssr.c +++ b/drivers/clk/renesas/r8a779a0-cpg-mssr.c @@ -266,7 +266,6 @@ static const struct rcar_gen4_cpg_pll_config cpg_pll_configs[4] __initconst = { { 2, 128, 1, 192, 1, 32, }, }; - static int __init r8a779a0_cpg_mssr_init(struct device *dev) { const struct rcar_gen4_cpg_pll_config *cpg_pll_config; diff --git a/drivers/clk/renesas/r8a779h0-cpg-mssr.c b/drivers/clk/renesas/r8a779h0-cpg-mssr.c index e20c048bfa9b..9067e407cbc6 100644 --- a/drivers/clk/renesas/r8a779h0-cpg-mssr.c +++ b/drivers/clk/renesas/r8a779h0-cpg-mssr.c @@ -37,7 +37,6 @@ enum clk_ids { CLK_PLL5, CLK_PLL6, CLK_PLL1_DIV2, - CLK_PLL2_DIV2, CLK_PLL3_DIV2, CLK_PLL4_DIV2, CLK_PLL4_DIV5, @@ -78,7 +77,6 @@ static const struct cpg_core_clk r8a779h0_core_clks[] __initconst = { DEF_GEN4_PLL_V8_25(".pll6", 6, CLK_PLL6, CLK_MAIN), DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1), - DEF_FIXED(".pll2_div2", CLK_PLL2_DIV2, CLK_PLL2, 2, 1), DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 2, 1), DEF_FIXED(".pll4_div2", CLK_PLL4_DIV2, CLK_PLL4, 2, 1), DEF_FIXED(".pll4_div5", CLK_PLL4_DIV5, CLK_PLL4, 5, 1), @@ -101,10 +99,10 @@ static const struct cpg_core_clk r8a779h0_core_clks[] __initconst = { DEF_RATE(".oco", CLK_OCO, 32768), /* Core Clock Outputs */ - DEF_GEN4_Z("zc0", R8A779H0_CLK_ZC0, CLK_TYPE_GEN4_Z, CLK_PLL2_DIV2, 2, 0), - DEF_GEN4_Z("zc1", R8A779H0_CLK_ZC1, CLK_TYPE_GEN4_Z, CLK_PLL2_DIV2, 2, 8), - DEF_GEN4_Z("zc2", R8A779H0_CLK_ZC2, CLK_TYPE_GEN4_Z, CLK_PLL2_DIV2, 2, 32), - DEF_GEN4_Z("zc3", R8A779H0_CLK_ZC3, CLK_TYPE_GEN4_Z, CLK_PLL2_DIV2, 2, 40), + DEF_GEN4_Z("zc0", R8A779H0_CLK_ZC0, CLK_TYPE_GEN4_Z, CLK_PLL2, 4, 0), + DEF_GEN4_Z("zc1", R8A779H0_CLK_ZC1, CLK_TYPE_GEN4_Z, CLK_PLL2, 4, 8), + DEF_GEN4_Z("zc2", R8A779H0_CLK_ZC2, CLK_TYPE_GEN4_Z, CLK_PLL2, 4, 32), + DEF_GEN4_Z("zc3", R8A779H0_CLK_ZC3, CLK_TYPE_GEN4_Z, CLK_PLL2, 4, 40), DEF_FIXED("s0d2", R8A779H0_CLK_S0D2, CLK_S0, 2, 1), DEF_FIXED("s0d3", R8A779H0_CLK_S0D3, CLK_S0, 3, 1), DEF_FIXED("s0d4", R8A779H0_CLK_S0D4, CLK_S0, 4, 1), diff --git a/drivers/clk/renesas/r9a08g045-cpg.c b/drivers/clk/renesas/r9a08g045-cpg.c index 1ce40fb51f13..b2ae8cdc4723 100644 --- a/drivers/clk/renesas/r9a08g045-cpg.c +++ b/drivers/clk/renesas/r9a08g045-cpg.c @@ -9,6 +9,7 @@ #include <linux/device.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/pm_domain.h> #include <dt-bindings/clock/r9a08g045-cpg.h> @@ -266,61 +267,50 @@ static const struct rzg2l_cpg_pm_domain_init_data r9a08g045_pm_domains[] = { /* Keep always-on domain on the first position for proper domains registration. */ DEF_PD("always-on", R9A08G045_PD_ALWAYS_ON, DEF_REG_CONF(0, 0), - RZG2L_PD_F_ALWAYS_ON), + GENPD_FLAG_ALWAYS_ON | GENPD_FLAG_IRQ_SAFE), DEF_PD("gic", R9A08G045_PD_GIC, DEF_REG_CONF(CPG_BUS_ACPU_MSTOP, BIT(3)), - RZG2L_PD_F_ALWAYS_ON), + GENPD_FLAG_ALWAYS_ON), DEF_PD("ia55", R9A08G045_PD_IA55, DEF_REG_CONF(CPG_BUS_PERI_CPU_MSTOP, BIT(13)), - RZG2L_PD_F_ALWAYS_ON), + GENPD_FLAG_ALWAYS_ON), DEF_PD("dmac", R9A08G045_PD_DMAC, DEF_REG_CONF(CPG_BUS_REG1_MSTOP, GENMASK(3, 0)), - RZG2L_PD_F_ALWAYS_ON), + GENPD_FLAG_ALWAYS_ON), DEF_PD("wdt0", R9A08G045_PD_WDT0, DEF_REG_CONF(CPG_BUS_REG0_MSTOP, BIT(0)), - RZG2L_PD_F_NONE), + GENPD_FLAG_IRQ_SAFE), DEF_PD("sdhi0", R9A08G045_PD_SDHI0, - DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(0)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(0)), 0), DEF_PD("sdhi1", R9A08G045_PD_SDHI1, - DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(1)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(1)), 0), DEF_PD("sdhi2", R9A08G045_PD_SDHI2, - DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(11)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(11)), 0), DEF_PD("usb0", R9A08G045_PD_USB0, - DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, GENMASK(6, 5)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, GENMASK(6, 5)), 0), DEF_PD("usb1", R9A08G045_PD_USB1, - DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(7)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(7)), 0), DEF_PD("usb-phy", R9A08G045_PD_USB_PHY, - DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(4)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(4)), 0), DEF_PD("eth0", R9A08G045_PD_ETHER0, - DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(2)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(2)), 0), DEF_PD("eth1", R9A08G045_PD_ETHER1, - DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(3)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_PERI_COM_MSTOP, BIT(3)), 0), DEF_PD("i2c0", R9A08G045_PD_I2C0, - DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(10)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(10)), 0), DEF_PD("i2c1", R9A08G045_PD_I2C1, - DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(11)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(11)), 0), DEF_PD("i2c2", R9A08G045_PD_I2C2, - DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(12)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(12)), 0), DEF_PD("i2c3", R9A08G045_PD_I2C3, - DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(13)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(13)), 0), DEF_PD("scif0", R9A08G045_PD_SCIF0, - DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(1)), - RZG2L_PD_F_NONE), + DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(1)), 0), DEF_PD("vbat", R9A08G045_PD_VBAT, DEF_REG_CONF(CPG_BUS_MCPU3_MSTOP, BIT(8)), - RZG2L_PD_F_ALWAYS_ON), + GENPD_FLAG_ALWAYS_ON), + DEF_PD("rtc", R9A08G045_PD_RTC, + DEF_REG_CONF(CPG_BUS_MCPU3_MSTOP, BIT(7)), 0), }; const struct rzg2l_cpg_info r9a08g045_cpg_info = { diff --git a/drivers/clk/renesas/r9a09g011-cpg.c b/drivers/clk/renesas/r9a09g011-cpg.c index dda9f29dff33..22272279b104 100644 --- a/drivers/clk/renesas/r9a09g011-cpg.c +++ b/drivers/clk/renesas/r9a09g011-cpg.c @@ -98,7 +98,6 @@ static const struct clk_div_table dtable_divd[] = { {0, 0}, }; - static const struct clk_div_table dtable_divw[] = { {0, 6}, {1, 7}, diff --git a/drivers/clk/renesas/r9a09g057-cpg.c b/drivers/clk/renesas/r9a09g057-cpg.c index 3ee32db5c0af..7c4507fd34e6 100644 --- a/drivers/clk/renesas/r9a09g057-cpg.c +++ b/drivers/clk/renesas/r9a09g057-cpg.c @@ -41,6 +41,14 @@ enum clk_ids { MOD_CLK_BASE, }; +static const struct clk_div_table dtable_1_8[] = { + {0, 1}, + {1, 2}, + {2, 4}, + {3, 8}, + {0, 0}, +}; + static const struct clk_div_table dtable_2_64[] = { {0, 2}, {1, 4}, @@ -74,10 +82,19 @@ static const struct cpg_core_clk r9a09g057_core_clks[] __initconst = { /* Core Clocks */ DEF_FIXED("sys_0_pclk", R9A09G057_SYS_0_PCLK, CLK_QEXTAL, 1, 1), + DEF_DDIV("ca55_0_coreclk0", R9A09G057_CA55_0_CORE_CLK0, CLK_PLLCA55, + CDDIV1_DIVCTL0, dtable_1_8), + DEF_DDIV("ca55_0_coreclk1", R9A09G057_CA55_0_CORE_CLK1, CLK_PLLCA55, + CDDIV1_DIVCTL1, dtable_1_8), + DEF_DDIV("ca55_0_coreclk2", R9A09G057_CA55_0_CORE_CLK2, CLK_PLLCA55, + CDDIV1_DIVCTL2, dtable_1_8), + DEF_DDIV("ca55_0_coreclk3", R9A09G057_CA55_0_CORE_CLK3, CLK_PLLCA55, + CDDIV1_DIVCTL3, dtable_1_8), DEF_FIXED("iotop_0_shclk", R9A09G057_IOTOP_0_SHCLK, CLK_PLLCM33_DIV16, 1, 1), }; static const struct rzv2h_mod_clk r9a09g057_mod_clks[] __initconst = { + DEF_MOD_CRITICAL("icu_0_pclk_i", CLK_PLLCM33_DIV16, 0, 5, 0, 5), DEF_MOD("gtm_0_pclk", CLK_PLLCM33_DIV16, 4, 3, 2, 3), DEF_MOD("gtm_1_pclk", CLK_PLLCM33_DIV16, 4, 4, 2, 4), DEF_MOD("gtm_2_pclk", CLK_PLLCLN_DIV16, 4, 5, 2, 5), @@ -119,6 +136,7 @@ static const struct rzv2h_mod_clk r9a09g057_mod_clks[] __initconst = { }; static const struct rzv2h_reset r9a09g057_resets[] __initconst = { + DEF_RST(3, 6, 1, 7), /* ICU_0_PRESETN_I */ DEF_RST(6, 13, 2, 30), /* GTM_0_PRESETZ */ DEF_RST(6, 14, 2, 31), /* GTM_1_PRESETZ */ DEF_RST(6, 15, 3, 0), /* GTM_2_PRESETZ */ diff --git a/drivers/clk/renesas/rcar-cpg-lib.c b/drivers/clk/renesas/rcar-cpg-lib.c index 42b126ea3e13..a45f8e7e9ab6 100644 --- a/drivers/clk/renesas/rcar-cpg-lib.c +++ b/drivers/clk/renesas/rcar-cpg-lib.c @@ -206,4 +206,3 @@ struct clk * __init cpg_rpcd2_clk_register(const char *name, return clk; } - diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c index 20b89eb6c35c..027100e84ee4 100644 --- a/drivers/clk/renesas/rcar-gen3-cpg.c +++ b/drivers/clk/renesas/rcar-gen3-cpg.c @@ -335,7 +335,6 @@ static u32 cpg_quirks __initdata; #define RCKCR_CKSEL BIT(1) /* Manual RCLK parent selection */ - static const struct soc_device_attribute cpg_quirks_match[] __initconst = { { .soc_id = "r8a7796", .revision = "ES1.0", diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c index 1b421b809796..79e7a90c3b1b 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.c +++ b/drivers/clk/renesas/renesas-cpg-mssr.c @@ -39,7 +39,6 @@ #define WARN_DEBUG(x) do { } while (0) #endif - /* * Module Standby and Software Reset register offets. * @@ -716,7 +715,6 @@ static inline int cpg_mssr_reset_controller_register(struct cpg_mssr_priv *priv) } #endif /* !CONFIG_RESET_CONTROLLER */ - static const struct of_device_id cpg_mssr_match[] = { #ifdef CONFIG_CLK_R7S9210 { diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c index 88bf39e8c79c..ddf722ca79eb 100644 --- a/drivers/clk/renesas/rzg2l-cpg.c +++ b/drivers/clk/renesas/rzg2l-cpg.c @@ -548,7 +548,7 @@ static unsigned long rzg2l_cpg_get_foutpostdiv_rate(struct rzg2l_pll5_param *params, unsigned long rate) { - unsigned long foutpostdiv_rate; + unsigned long foutpostdiv_rate, foutvco_rate; params->pl5_intin = rate / MEGA; params->pl5_fracin = div_u64(((u64)rate % MEGA) << 24, MEGA); @@ -557,10 +557,11 @@ rzg2l_cpg_get_foutpostdiv_rate(struct rzg2l_pll5_param *params, params->pl5_postdiv2 = 1; params->pl5_spread = 0x16; - foutpostdiv_rate = - EXTAL_FREQ_IN_MEGA_HZ * MEGA / params->pl5_refdiv * - ((((params->pl5_intin << 24) + params->pl5_fracin)) >> 24) / - (params->pl5_postdiv1 * params->pl5_postdiv2); + foutvco_rate = div_u64(mul_u32_u32(EXTAL_FREQ_IN_MEGA_HZ * MEGA, + (params->pl5_intin << 24) + params->pl5_fracin), + params->pl5_refdiv) >> 24; + foutpostdiv_rate = DIV_ROUND_CLOSEST_ULL(foutvco_rate, + params->pl5_postdiv1 * params->pl5_postdiv2); return foutpostdiv_rate; } @@ -1680,23 +1681,31 @@ static int rzg2l_cpg_power_off(struct generic_pm_domain *domain) return 0; } -static int __init rzg2l_cpg_pd_setup(struct rzg2l_cpg_pd *pd, bool always_on) +static int __init rzg2l_cpg_pd_setup(struct rzg2l_cpg_pd *pd) { + bool always_on = !!(pd->genpd.flags & GENPD_FLAG_ALWAYS_ON); struct dev_power_governor *governor; + int ret; + + if (always_on) + governor = &pm_domain_always_on_gov; + else + governor = &simple_qos_governor; pd->genpd.flags |= GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP; pd->genpd.attach_dev = rzg2l_cpg_attach_dev; pd->genpd.detach_dev = rzg2l_cpg_detach_dev; - if (always_on) { - pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON; - governor = &pm_domain_always_on_gov; - } else { - pd->genpd.power_on = rzg2l_cpg_power_on; - pd->genpd.power_off = rzg2l_cpg_power_off; - governor = &simple_qos_governor; - } + pd->genpd.power_on = rzg2l_cpg_power_on; + pd->genpd.power_off = rzg2l_cpg_power_off; + + ret = pm_genpd_init(&pd->genpd, governor, !always_on); + if (ret) + return ret; - return pm_genpd_init(&pd->genpd, governor, !always_on); + if (always_on) + ret = rzg2l_cpg_power_on(&pd->genpd); + + return ret; } static int __init rzg2l_cpg_add_clk_domain(struct rzg2l_cpg_priv *priv) @@ -1711,8 +1720,9 @@ static int __init rzg2l_cpg_add_clk_domain(struct rzg2l_cpg_priv *priv) return -ENOMEM; pd->genpd.name = np->name; + pd->genpd.flags = GENPD_FLAG_ALWAYS_ON; pd->priv = priv; - ret = rzg2l_cpg_pd_setup(pd, true); + ret = rzg2l_cpg_pd_setup(pd); if (ret) return ret; @@ -1777,7 +1787,6 @@ static int __init rzg2l_cpg_add_pm_domains(struct rzg2l_cpg_priv *priv) return ret; for (unsigned int i = 0; i < info->num_pm_domains; i++) { - bool always_on = !!(info->pm_domains[i].flags & RZG2L_PD_F_ALWAYS_ON); struct rzg2l_cpg_pd *pd; pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); @@ -1785,20 +1794,15 @@ static int __init rzg2l_cpg_add_pm_domains(struct rzg2l_cpg_priv *priv) return -ENOMEM; pd->genpd.name = info->pm_domains[i].name; + pd->genpd.flags = info->pm_domains[i].genpd_flags; pd->conf = info->pm_domains[i].conf; pd->id = info->pm_domains[i].id; pd->priv = priv; - ret = rzg2l_cpg_pd_setup(pd, always_on); + ret = rzg2l_cpg_pd_setup(pd); if (ret) return ret; - if (always_on) { - ret = rzg2l_cpg_power_on(&pd->genpd); - if (ret) - return ret; - } - domains->domains[i] = &pd->genpd; /* Parent should be on the very first entry of info->pm_domains[]. */ if (!i) { diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h index ecfe7e7ea8a1..881a89b5a710 100644 --- a/drivers/clk/renesas/rzg2l-cpg.h +++ b/drivers/clk/renesas/rzg2l-cpg.h @@ -270,14 +270,14 @@ struct rzg2l_cpg_pm_domain_conf { * struct rzg2l_cpg_pm_domain_init_data - PM domain init data * @name: PM domain name * @conf: PM domain configuration - * @flags: RZG2L PM domain flags (see RZG2L_PD_F_*) + * @genpd_flags: genpd flags (see GENPD_FLAG_*) * @id: PM domain ID (similar to the ones defined in * include/dt-bindings/clock/<soc-id>-cpg.h) */ struct rzg2l_cpg_pm_domain_init_data { const char * const name; struct rzg2l_cpg_pm_domain_conf conf; - u32 flags; + u32 genpd_flags; u16 id; }; @@ -288,13 +288,9 @@ struct rzg2l_cpg_pm_domain_init_data { .conf = { \ .mstop = (_mstop_conf), \ }, \ - .flags = (_flags), \ + .genpd_flags = (_flags), \ } -/* Power domain flags. */ -#define RZG2L_PD_F_ALWAYS_ON BIT(0) -#define RZG2L_PD_F_NONE (0) - /** * struct rzg2l_cpg_info - SoC-specific CPG Description * diff --git a/drivers/clk/renesas/rzv2h-cpg.h b/drivers/clk/renesas/rzv2h-cpg.h index 1bd406c69015..819029c81904 100644 --- a/drivers/clk/renesas/rzv2h-cpg.h +++ b/drivers/clk/renesas/rzv2h-cpg.h @@ -32,8 +32,13 @@ struct ddiv { }) #define CPG_CDDIV0 (0x400) +#define CPG_CDDIV1 (0x404) #define CDDIV0_DIVCTL2 DDIV_PACK(CPG_CDDIV0, 8, 3, 2) +#define CDDIV1_DIVCTL0 DDIV_PACK(CPG_CDDIV1, 0, 2, 4) +#define CDDIV1_DIVCTL1 DDIV_PACK(CPG_CDDIV1, 4, 2, 5) +#define CDDIV1_DIVCTL2 DDIV_PACK(CPG_CDDIV1, 8, 2, 6) +#define CDDIV1_DIVCTL3 DDIV_PACK(CPG_CDDIV1, 12, 2, 7) /** * Definitions of CPG Core Clocks diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 5484a65f66b9..ace9c842d7bb 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -170,6 +170,7 @@ config RESET_MESON_AUDIO_ARB config RESET_NPCM bool "NPCM BMC Reset Driver" if COMPILE_TEST default ARCH_NPCM + select AUXILIARY_BUS help This enables the reset controller driver for Nuvoton NPCM BMC SoCs. diff --git a/drivers/reset/reset-npcm.c b/drivers/reset/reset-npcm.c index 8935ef95a2d1..4f3b9fc58de0 100644 --- a/drivers/reset/reset-npcm.c +++ b/drivers/reset/reset-npcm.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2019 Nuvoton Technology corporation. +#include <linux/auxiliary_bus.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> @@ -10,11 +11,14 @@ #include <linux/property.h> #include <linux/reboot.h> #include <linux/reset-controller.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/mfd/syscon.h> #include <linux/regmap.h> #include <linux/of_address.h> +#include <soc/nuvoton/clock-npcm8xx.h> + /* NPCM7xx GCR registers */ #define NPCM_MDLR_OFFSET 0x7C #define NPCM7XX_MDLR_USBD0 BIT(9) @@ -89,6 +93,7 @@ struct npcm_rc_data { const struct npcm_reset_info *info; struct regmap *gcr_regmap; u32 sw_reset_number; + struct device *dev; void __iomem *base; spinlock_t lock; }; @@ -372,6 +377,67 @@ static const struct reset_control_ops npcm_rc_ops = { .status = npcm_rc_status, }; +static void npcm_clock_unregister_adev(void *_adev) +{ + struct auxiliary_device *adev = _adev; + + auxiliary_device_delete(adev); + auxiliary_device_uninit(adev); +} + +static void npcm_clock_adev_release(struct device *dev) +{ + struct auxiliary_device *adev = to_auxiliary_dev(dev); + struct npcm_clock_adev *rdev = to_npcm_clock_adev(adev); + + kfree(rdev); +} + +static struct auxiliary_device *npcm_clock_adev_alloc(struct npcm_rc_data *rst_data, char *clk_name) +{ + struct npcm_clock_adev *rdev; + struct auxiliary_device *adev; + int ret; + + rdev = kzalloc(sizeof(*rdev), GFP_KERNEL); + if (!rdev) + return ERR_PTR(-ENOMEM); + + rdev->base = rst_data->base; + + adev = &rdev->adev; + adev->name = clk_name; + adev->dev.parent = rst_data->dev; + adev->dev.release = npcm_clock_adev_release; + adev->id = 555u; + + ret = auxiliary_device_init(adev); + if (ret) { + kfree(rdev); + return ERR_PTR(ret); + } + + return adev; +} + +static int npcm8xx_clock_controller_register(struct npcm_rc_data *rst_data, char *clk_name) +{ + struct auxiliary_device *adev; + int ret; + + adev = npcm_clock_adev_alloc(rst_data, clk_name); + if (IS_ERR(adev)) + return PTR_ERR(adev); + + ret = auxiliary_device_add(adev); + if (ret) { + auxiliary_device_uninit(adev); + return ret; + } + + return devm_add_action_or_reset(rst_data->dev, npcm_clock_unregister_adev, adev); +} + static int npcm_rc_probe(struct platform_device *pdev) { struct npcm_rc_data *rc; @@ -392,6 +458,7 @@ static int npcm_rc_probe(struct platform_device *pdev) rc->rcdev.of_node = pdev->dev.of_node; rc->rcdev.of_reset_n_cells = 2; rc->rcdev.of_xlate = npcm_reset_xlate; + rc->dev = &pdev->dev; ret = devm_reset_controller_register(&pdev->dev, &rc->rcdev); if (ret) { @@ -408,12 +475,19 @@ static int npcm_rc_probe(struct platform_device *pdev) rc->restart_nb.priority = 192, rc->restart_nb.notifier_call = npcm_rc_restart, ret = register_restart_handler(&rc->restart_nb); - if (ret) + if (ret) { dev_warn(&pdev->dev, "failed to register restart handler\n"); + return ret; + } } } - return ret; + switch (rc->info->bmc_id) { + case BMC_NPCM8XX: + return npcm8xx_clock_controller_register(rc, "clk-npcm8xx"); + default: + return 0; + } } static struct platform_driver npcm_rc_driver = { diff --git a/include/dt-bindings/clock/mobileye,eyeq5-clk.h b/include/dt-bindings/clock/mobileye,eyeq5-clk.h index 26d8930335e4..f353c2988035 100644 --- a/include/dt-bindings/clock/mobileye,eyeq5-clk.h +++ b/include/dt-bindings/clock/mobileye,eyeq5-clk.h @@ -6,17 +6,60 @@ #ifndef _DT_BINDINGS_CLOCK_MOBILEYE_EYEQ5_CLK_H #define _DT_BINDINGS_CLOCK_MOBILEYE_EYEQ5_CLK_H -#define EQ5C_PLL_CPU 0 -#define EQ5C_PLL_VMP 1 -#define EQ5C_PLL_PMA 2 -#define EQ5C_PLL_VDI 3 -#define EQ5C_PLL_DDR0 4 -#define EQ5C_PLL_PCI 5 -#define EQ5C_PLL_PER 6 -#define EQ5C_PLL_PMAC 7 -#define EQ5C_PLL_MPC 8 -#define EQ5C_PLL_DDR1 9 - -#define EQ5C_DIV_OSPI 10 +#define EQ5C_PLL_CPU 0 +#define EQ5C_PLL_VMP 1 +#define EQ5C_PLL_PMA 2 +#define EQ5C_PLL_VDI 3 +#define EQ5C_PLL_DDR0 4 +#define EQ5C_PLL_PCI 5 +#define EQ5C_PLL_PER 6 +#define EQ5C_PLL_PMAC 7 +#define EQ5C_PLL_MPC 8 +#define EQ5C_PLL_DDR1 9 + +#define EQ5C_DIV_OSPI 10 + +/* EQ5C_PLL_CPU children */ +#define EQ5C_CPU_CORE0 11 +#define EQ5C_CPU_CORE1 12 +#define EQ5C_CPU_CORE2 13 +#define EQ5C_CPU_CORE3 14 + +/* EQ5C_PLL_PER children */ +#define EQ5C_PER_OCC 15 +#define EQ5C_PER_UART 16 +#define EQ5C_PER_SPI 17 +#define EQ5C_PER_I2C 18 +#define EQ5C_PER_GPIO 19 +#define EQ5C_PER_EMMC 20 +#define EQ5C_PER_OCC_PCI 21 + +#define EQ6LC_PLL_DDR 0 +#define EQ6LC_PLL_CPU 1 +#define EQ6LC_PLL_PER 2 +#define EQ6LC_PLL_VDI 3 + +#define EQ6HC_CENTRAL_PLL_CPU 0 +#define EQ6HC_CENTRAL_CPU_OCC 1 + +#define EQ6HC_WEST_PLL_PER 0 +#define EQ6HC_WEST_PER_OCC 1 +#define EQ6HC_WEST_PER_UART 2 + +#define EQ6HC_SOUTH_PLL_VDI 0 +#define EQ6HC_SOUTH_PLL_PCIE 1 +#define EQ6HC_SOUTH_PLL_PER 2 +#define EQ6HC_SOUTH_PLL_ISP 3 + +#define EQ6HC_SOUTH_DIV_EMMC 4 +#define EQ6HC_SOUTH_DIV_OSPI_REF 5 +#define EQ6HC_SOUTH_DIV_OSPI_SYS 6 +#define EQ6HC_SOUTH_DIV_TSU 7 + +#define EQ6HC_ACC_PLL_XNN 0 +#define EQ6HC_ACC_PLL_VMP 1 +#define EQ6HC_ACC_PLL_PMA 2 +#define EQ6HC_ACC_PLL_MPC 3 +#define EQ6HC_ACC_PLL_NOC 4 #endif diff --git a/include/dt-bindings/clock/r9a08g045-cpg.h b/include/dt-bindings/clock/r9a08g045-cpg.h index 8281e9caf3a9..311521fe4b59 100644 --- a/include/dt-bindings/clock/r9a08g045-cpg.h +++ b/include/dt-bindings/clock/r9a08g045-cpg.h @@ -308,5 +308,6 @@ #define R9A08G045_PD_DDR 64 #define R9A08G045_PD_TZCDDR 65 #define R9A08G045_PD_OTFDE_DDR 66 +#define R9A08G045_PD_RTC 67 #endif /* __DT_BINDINGS_CLOCK_R9A08G045_CPG_H__ */ diff --git a/include/dt-bindings/clock/renesas,r9a08g045-vbattb.h b/include/dt-bindings/clock/renesas,r9a08g045-vbattb.h new file mode 100644 index 000000000000..67774eafad06 --- /dev/null +++ b/include/dt-bindings/clock/renesas,r9a08g045-vbattb.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_R9A08G045_VBATTB_H__ +#define __DT_BINDINGS_CLOCK_R9A08G045_VBATTB_H__ + +#define VBATTB_XC 0 +#define VBATTB_XBYP 1 +#define VBATTB_MUX 2 +#define VBATTB_VBATTCLK 3 + +#endif /* __DT_BINDINGS_CLOCK_R9A08G045_VBATTB_H__ */ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 5cbd112d1187..2e6e603b7493 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -623,6 +623,24 @@ struct clk *clk_register_gate(struct device *dev, const char *name, NULL, (flags), (reg), (bit_idx), \ (clk_gate_flags), (lock)) /** + * devm_clk_hw_register_gate_parent_hw - register a gate clock with the clock + * framework + * @dev: device that is registering this clock + * @name: name of this clock + * @parent_hw: pointer to parent clk + * @flags: framework-specific flags for this clock + * @reg: register address to control gating of this clock + * @bit_idx: which bit in the register controls gating of this clock + * @clk_gate_flags: gate-specific flags for this clock + * @lock: shared register lock for this clock + */ +#define devm_clk_hw_register_gate_parent_hw(dev, name, parent_hw, flags, \ + reg, bit_idx, clk_gate_flags, \ + lock) \ + __devm_clk_hw_register_gate((dev), NULL, (name), NULL, (parent_hw), \ + NULL, (flags), (reg), (bit_idx), \ + (clk_gate_flags), (lock)) +/** * devm_clk_hw_register_gate_parent_data - register a gate clock with the * clock framework * @dev: device that is registering this clock @@ -689,13 +707,15 @@ struct clk_div_table { * CLK_DIVIDER_BIG_ENDIAN - By default little endian register accesses are used * for the divider register. Setting this flag makes the register accesses * big endian. + * CLK_DIVIDER_EVEN_INTEGERS - clock divisor is 2, 4, 6, 8, 10, etc. + * Formula is 2 * (value read from hardware + 1). */ struct clk_divider { struct clk_hw hw; void __iomem *reg; u8 shift; u8 width; - u8 flags; + u16 flags; const struct clk_div_table *table; spinlock_t *lock; }; @@ -711,6 +731,7 @@ struct clk_divider { #define CLK_DIVIDER_READ_ONLY BIT(5) #define CLK_DIVIDER_MAX_AT_ZERO BIT(6) #define CLK_DIVIDER_BIG_ENDIAN BIT(7) +#define CLK_DIVIDER_EVEN_INTEGERS BIT(8) extern const struct clk_ops clk_divider_ops; extern const struct clk_ops clk_divider_ro_ops; @@ -740,19 +761,21 @@ struct clk_hw *__clk_hw_register_divider(struct device *dev, struct device_node *np, const char *name, const char *parent_name, const struct clk_hw *parent_hw, const struct clk_parent_data *parent_data, unsigned long flags, - void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags, + void __iomem *reg, u8 shift, u8 width, + unsigned long clk_divider_flags, const struct clk_div_table *table, spinlock_t *lock); struct clk_hw *__devm_clk_hw_register_divider(struct device *dev, struct device_node *np, const char *name, const char *parent_name, const struct clk_hw *parent_hw, const struct clk_parent_data *parent_data, unsigned long flags, - void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags, + void __iomem *reg, u8 shift, u8 width, + unsigned long clk_divider_flags, const struct clk_div_table *table, spinlock_t *lock); struct clk *clk_register_divider_table(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, - u8 clk_divider_flags, const struct clk_div_table *table, - spinlock_t *lock); + unsigned long clk_divider_flags, + const struct clk_div_table *table, spinlock_t *lock); /** * clk_register_divider - register a divider clock with the clock framework * @dev: device registering this clock @@ -1137,6 +1160,9 @@ struct clk_hw *clk_hw_register_fixed_factor_with_accuracy_fwname(struct device * struct device_node *np, const char *name, const char *fw_name, unsigned long flags, unsigned int mult, unsigned int div, unsigned long acc); +struct clk_hw *clk_hw_register_fixed_factor_index(struct device *dev, + const char *name, unsigned int index, unsigned long flags, + unsigned int mult, unsigned int div); void clk_hw_unregister_fixed_factor(struct clk_hw *hw); struct clk_hw *devm_clk_hw_register_fixed_factor(struct device *dev, const char *name, const char *parent_name, unsigned long flags, diff --git a/include/soc/nuvoton/clock-npcm8xx.h b/include/soc/nuvoton/clock-npcm8xx.h new file mode 100644 index 000000000000..1d974e89d8a8 --- /dev/null +++ b/include/soc/nuvoton/clock-npcm8xx.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SOC_NPCM8XX_CLOCK_H +#define __SOC_NPCM8XX_CLOCK_H + +#include <linux/auxiliary_bus.h> +#include <linux/container_of.h> + +struct npcm_clock_adev { + void __iomem *base; + struct auxiliary_device adev; +}; + +static inline struct npcm_clock_adev *to_npcm_clock_adev(struct auxiliary_device *_adev) +{ + return container_of(_adev, struct npcm_clock_adev, adev); +} + +#endif |