diff options
| -rw-r--r-- | drivers/usb/core/usb.c | 5 | ||||
| -rw-r--r-- | drivers/usb/dwc2/core.h | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/zero.c | 4 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/bcm63xx_udc.c | 16 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/core.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/dummy_hcd.c | 20 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.h | 4 |
9 files changed, 29 insertions, 30 deletions
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index f16c26dc079d..bafc113f2b3e 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -19,9 +19,8 @@ * just a collection of helper routines that implement the * generic USB things that the real drivers can use.. * - * Think of this as a "USB library" rather than anything else. - * It should be considered a slave, with no callbacks. Callbacks - * are evil. + * Think of this as a "USB library" rather than anything else, + * with no callbacks. Callbacks are evil. */ #include <linux/module.h> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 132d687f1590..9deff0400a92 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -1036,7 +1036,7 @@ struct dwc2_hregs_backup { * @fifo_mem: Total internal RAM for FIFOs (bytes) * @fifo_map: Each bit intend for concrete fifo. If that bit is set, * then that fifo is used - * @gadget: Represents a usb slave device + * @gadget: Represents a usb gadget device * @connected: Used in slave mode. True if device connected with host * @eps_in: The IN endpoints being supplied to the gadget framework * @eps_out: The OUT endpoints being supplied to the gadget framework diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index c6db0a0a340c..7e47e6223089 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -19,8 +19,8 @@ menuconfig USB_GADGET select USB_COMMON select NLS help - USB is a master/slave protocol, organized with one master - host (such as a PC) controlling up to 127 peripheral devices. + USB is a host/device protocol, organized with one host (such as a + PC) controlling up to 127 peripheral devices. The USB hardware is asymmetric, which makes it easier to set up: you can't connect a "to-the-host" connector to a peripheral. diff --git a/drivers/usb/gadget/legacy/zero.c b/drivers/usb/gadget/legacy/zero.c index 6e84b44c8a3b..23312a07efb4 100644 --- a/drivers/usb/gadget/legacy/zero.c +++ b/drivers/usb/gadget/legacy/zero.c @@ -11,8 +11,8 @@ * can write a hardware-agnostic gadget driver running inside a USB device. * Some hardware details are visible, but don't affect most of the driver. * - * Use it with the Linux host/master side "usbtest" driver to get a basic - * functional test of your device-side usb stack, or with "usb-skeleton". + * Use it with the Linux host side "usbtest" driver to get a basic functional + * test of your device-side usb stack, or with "usb-skeleton". * * It supports two similar configurations. One sinks whatever the usb host * writes, and in return sources zeroes. The other loops whatever the host diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 3a7179e90f4e..1a12aab208b4 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -474,7 +474,7 @@ config USB_DUMMY_HCD help This host controller driver emulates USB, looping all data transfer requests back to a USB "gadget driver" in the same host. The host - side is the master; the gadget side is the slave. Gadget drivers + side is the controller; the gadget side is the device. Gadget drivers can be high, full, or low speed; and they have access to endpoints like those from NET2280, PXA2xx, or SA1100 hardware. diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c index 54501814dc3f..feaec00a3c16 100644 --- a/drivers/usb/gadget/udc/bcm63xx_udc.c +++ b/drivers/usb/gadget/udc/bcm63xx_udc.c @@ -266,8 +266,8 @@ struct bcm63xx_req { * @pd: Platform data (board/port info). * @usbd_clk: Clock descriptor for the USB device block. * @usbh_clk: Clock descriptor for the USB host block. - * @gadget: USB slave device. - * @driver: Driver for USB slave devices. + * @gadget: USB device. + * @driver: Driver for USB device. * @usbd_regs: Base address of the USBD/USB20D block. * @iudma_regs: Base address of the USBD's associated IUDMA block. * @bep: Array of endpoints, including ep0. @@ -1744,7 +1744,7 @@ static void bcm63xx_ep0_process(struct work_struct *w) /** * bcm63xx_udc_get_frame - Read current SOF frame number from the HW. - * @gadget: USB slave device. + * @gadget: USB device. */ static int bcm63xx_udc_get_frame(struct usb_gadget *gadget) { @@ -1756,7 +1756,7 @@ static int bcm63xx_udc_get_frame(struct usb_gadget *gadget) /** * bcm63xx_udc_pullup - Enable/disable pullup on D+ line. - * @gadget: USB slave device. + * @gadget: USB device. * @is_on: 0 to disable pullup, 1 to enable. * * See notes in bcm63xx_select_pullup(). @@ -1805,8 +1805,8 @@ static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on) /** * bcm63xx_udc_start - Start the controller. - * @gadget: USB slave device. - * @driver: Driver for USB slave devices. + * @gadget: USB device. + * @driver: Driver for USB device. */ static int bcm63xx_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) @@ -1842,8 +1842,8 @@ static int bcm63xx_udc_start(struct usb_gadget *gadget, /** * bcm63xx_udc_stop - Shut down the controller. - * @gadget: USB slave device. - * @driver: Driver for USB slave devices. + * @gadget: USB device. + * @driver: Driver for USB device. */ static int bcm63xx_udc_stop(struct usb_gadget *gadget) { diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 2e28dde8376f..ee226ad802a4 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(usb_ep_set_maxpacket_limit); * for interrupt transfers as well as bulk, but it likely couldn't be used * for iso transfers or for endpoint 14. some endpoints are fully * configurable, with more generic names like "ep-a". (remember that for - * USB, "in" means "towards the USB master".) + * USB, "in" means "towards the USB host".) * * This routine must be called in process context. * diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 0eeaead5acea..425a97926590 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -14,7 +14,7 @@ * Linux-USB host controller driver. USB traffic is simulated; there's * no need for USB hardware. Use this with two other drivers: * - * - Gadget driver, responding to requests (slave); + * - Gadget driver, responding to requests (device); * - Host-side device driver, as already familiar in Linux. * * Having this all in one kernel can help some stages of development, @@ -261,7 +261,7 @@ struct dummy { spinlock_t lock; /* - * SLAVE/GADGET side support + * DEVICE/GADGET side support */ struct dummy_ep ep[DUMMY_ENDPOINTS]; int address; @@ -276,7 +276,7 @@ struct dummy { unsigned pullup:1; /* - * MASTER/HOST side support + * HOST side support */ struct dummy_hcd *hs_hcd; struct dummy_hcd *ss_hcd; @@ -323,7 +323,7 @@ static inline struct dummy *gadget_dev_to_dummy(struct device *dev) /*-------------------------------------------------------------------------*/ -/* SLAVE/GADGET SIDE UTILITY ROUTINES */ +/* DEVICE/GADGET SIDE UTILITY ROUTINES */ /* called with spinlock held */ static void nuke(struct dummy *dum, struct dummy_ep *ep) @@ -486,7 +486,7 @@ static void set_link_state(struct dummy_hcd *dum_hcd) /*-------------------------------------------------------------------------*/ -/* SLAVE/GADGET SIDE DRIVER +/* DEVICE/GADGET SIDE DRIVER * * This only tracks gadget state. All the work is done when the host * side tries some (emulated) i/o operation. Real device controller @@ -957,7 +957,7 @@ static DEVICE_ATTR_RO(function); * hardware can be built with discrete components, so the gadget API doesn't * require that assumption. * - * For this emulator, it might be convenient to create a usb slave device + * For this emulator, it might be convenient to create a usb device * for each driver that registers: just add to a big root hub. */ @@ -981,7 +981,7 @@ static int dummy_udc_start(struct usb_gadget *g, } /* - * SLAVE side init ... the layer above hardware, which + * DEVICE side init ... the layer above hardware, which * can't enumerate without help from the driver we're binding. */ @@ -1151,7 +1151,7 @@ static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor *desc) return index; } -/* MASTER/HOST SIDE DRIVER +/* HOST SIDE DRIVER * * this uses the hcd framework to hook up to host side drivers. * its root hub will only have one device, otherwise it acts like @@ -2451,8 +2451,8 @@ static int dummy_start(struct usb_hcd *hcd) struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); /* - * MASTER side init ... we emulate a root hub that'll only ever - * talk to one device (the slave side). Also appears in sysfs, + * HOST side init ... we emulate a root hub that'll only ever + * talk to one device (the gadget side). Also appears in sysfs, * just like more familiar pci-based HCDs. */ if (!usb_hcd_is_primary_hcd(hcd)) diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index a79a1325b4d9..be1641e0408b 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -302,7 +302,7 @@ enum ftdi_sio_baudrate { /* * FTDI_SIO_GET_LATENCY_TIMER * - * Set the timeout interval. The FTDI collects data from the slave + * Set the timeout interval. The FTDI collects data from the * device, transmitting it to the host when either A) 62 bytes are * received, or B) the timeout interval has elapsed and the buffer * contains at least 1 byte. Setting this value to a small number @@ -324,7 +324,7 @@ enum ftdi_sio_baudrate { /* * FTDI_SIO_SET_LATENCY_TIMER * - * Set the timeout interval. The FTDI collects data from the slave + * Set the timeout interval. The FTDI collects data from the * device, transmitting it to the host when either A) 62 bytes are * received, or B) the timeout interval has elapsed and the buffer * contains at least 1 byte. Setting this value to a small number |