summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt7
-rw-r--r--drivers/usb/phy/phy-am335x.c2
-rw-r--r--drivers/usb/phy/phy-generic.c84
-rw-r--r--drivers/usb/phy/phy-generic.h6
4 files changed, 63 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index d7e272671c7e..1bd37faba05b 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -15,7 +15,7 @@ Optional properties:
- vcc-supply: phandle to the regulator that provides RESET to the PHY.
-- reset-supply: phandle to the regulator that provides power to the PHY.
+- reset-gpios: Should specify the GPIO for reset.
Example:
@@ -25,10 +25,9 @@ Example:
clocks = <&osc 0>;
clock-names = "main_clk";
vcc-supply = <&hsusb1_vcc_regulator>;
- reset-supply = <&hsusb1_reset_regulator>;
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
-hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
-controls RESET.
+hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index 1495cdc751ad..6370e50649d7 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -53,7 +53,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
}
ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen,
- USB_PHY_TYPE_USB2, 0, false, false);
+ USB_PHY_TYPE_USB2, 0, false);
if (ret)
return ret;
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index fcc31045fda7..fce3a9e9bb5d 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -35,6 +35,9 @@
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
#include "phy-generic.h"
@@ -64,6 +67,23 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
return 0;
}
+static void nop_reset_set(struct usb_phy_gen_xceiv *nop, int asserted)
+{
+ int value;
+
+ if (!gpio_is_valid(nop->gpio_reset))
+ return;
+
+ value = asserted;
+ if (nop->reset_active_low)
+ value = !value;
+
+ gpio_set_value_cansleep(nop->gpio_reset, value);
+
+ if (!asserted)
+ usleep_range(10000, 20000);
+}
+
int usb_gen_phy_init(struct usb_phy *phy)
{
struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
@@ -76,11 +96,8 @@ int usb_gen_phy_init(struct usb_phy *phy)
if (!IS_ERR(nop->clk))
clk_prepare_enable(nop->clk);
- if (!IS_ERR(nop->reset)) {
- /* De-assert RESET */
- if (regulator_enable(nop->reset))
- dev_err(phy->dev, "Failed to de-assert reset\n");
- }
+ /* De-assert RESET */
+ nop_reset_set(nop, 0);
return 0;
}
@@ -90,11 +107,8 @@ void usb_gen_phy_shutdown(struct usb_phy *phy)
{
struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
- if (!IS_ERR(nop->reset)) {
- /* Assert RESET */
- if (regulator_disable(nop->reset))
- dev_err(phy->dev, "Failed to assert reset\n");
- }
+ /* Assert RESET */
+ nop_reset_set(nop, 1);
if (!IS_ERR(nop->clk))
clk_disable_unprepare(nop->clk);
@@ -136,8 +150,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
}
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
- enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
- bool needs_reset)
+ enum usb_phy_type type, u32 clk_rate, bool needs_vcc)
{
int err;
@@ -168,12 +181,22 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
return -EPROBE_DEFER;
}
- nop->reset = devm_regulator_get(dev, "reset");
- if (IS_ERR(nop->reset)) {
- dev_dbg(dev, "Error getting reset regulator: %ld\n",
- PTR_ERR(nop->reset));
- if (needs_reset)
- return -EPROBE_DEFER;
+ if (gpio_is_valid(nop->gpio_reset)) {
+ unsigned long gpio_flags;
+
+ /* Assert RESET */
+ if (nop->reset_active_low)
+ gpio_flags = GPIOF_OUT_INIT_LOW;
+ else
+ gpio_flags = GPIOF_OUT_INIT_HIGH;
+
+ err = devm_gpio_request_one(dev, nop->gpio_reset,
+ gpio_flags, dev_name(dev));
+ if (err) {
+ dev_err(dev, "Error requesting RESET GPIO %d\n",
+ nop->gpio_reset);
+ return err;
+ }
}
nop->dev = dev;
@@ -202,31 +225,36 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
int err;
u32 clk_rate = 0;
bool needs_vcc = false;
- bool needs_reset = false;
+
+ nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
+ if (!nop)
+ return -ENOMEM;
+
+ nop->reset_active_low = true; /* default behaviour */
if (dev->of_node) {
struct device_node *node = dev->of_node;
+ enum of_gpio_flags flags;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
- needs_reset = of_property_read_bool(node, "reset-supply");
+ nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
+ 0, &flags);
+ if (nop->gpio_reset == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
- needs_reset = pdata->needs_reset;
+ nop->gpio_reset = pdata->gpio_reset;
}
- nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
- if (!nop)
- return -ENOMEM;
-
-
- err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc,
- needs_reset);
+ err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc);
if (err)
return err;
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index 386d11b375aa..d2a220d81734 100644
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -6,14 +6,14 @@ struct usb_phy_gen_xceiv {
struct device *dev;
struct clk *clk;
struct regulator *vcc;
- struct regulator *reset;
+ int gpio_reset;
+ bool reset_active_low;
};
int usb_gen_phy_init(struct usb_phy *phy);
void usb_gen_phy_shutdown(struct usb_phy *phy);
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
- enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
- bool needs_reset);
+ enum usb_phy_type type, u32 clk_rate, bool needs_vcc);
#endif
generated by cgit (git 2.34.1) at 2024-06-19 01:47:34 +0000