summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/PCI/MSI-HOWTO.txt469
-rw-r--r--Documentation/devicetree/bindings/pci/aardvark-pci.txt56
-rw-r--r--Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt46
-rw-r--r--Documentation/kernel-parameters.txt9
-rw-r--r--MAINTAINERS17
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/include/asm/mach/pci.h1
-rw-r--r--arch/arm/kernel/bios32.c45
-rw-r--r--arch/arm64/Kconfig6
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-db.dts5
-rw-r--r--arch/arm64/boot/dts/marvell/armada-37xx.dtsi25
-rw-r--r--arch/arm64/kernel/pci.c159
-rw-r--r--arch/microblaze/include/asm/pci.h3
-rw-r--r--arch/microblaze/pci/pci-common.c73
-rw-r--r--arch/mips/include/asm/pci.h10
-rw-r--r--arch/mips/pci/pci.c19
-rw-r--r--arch/powerpc/include/asm/pci.h3
-rw-r--r--arch/powerpc/kernel/pci-common.c79
-rw-r--r--arch/sparc/include/asm/pci_64.h3
-rw-r--r--arch/sparc/kernel/pci.c20
-rw-r--r--arch/unicore32/kernel/pci.c9
-rw-r--r--arch/x86/pci/common.c2
-rw-r--r--arch/x86/pci/vmd.c41
-rw-r--r--drivers/acpi/Kconfig3
-rw-r--r--drivers/acpi/Makefile1
-rw-r--r--drivers/acpi/pci_mcfg.c92
-rw-r--r--drivers/acpi/pci_root.c35
-rw-r--r--drivers/irqchip/Kconfig18
-rw-r--r--drivers/misc/genwqe/card_base.c18
-rw-r--r--drivers/net/ethernet/atheros/alx/main.c12
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c6
-rw-r--r--drivers/net/ethernet/intel/fm10k/fm10k_pci.c11
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c9
-rw-r--r--drivers/net/ethernet/intel/igb/igb_main.c10
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c9
-rw-r--r--drivers/nvme/host/pci.c15
-rw-r--r--drivers/pci/Kconfig2
-rw-r--r--drivers/pci/bus.c31
-rw-r--r--drivers/pci/ecam.c6
-rw-r--r--drivers/pci/host/Kconfig49
-rw-r--r--drivers/pci/host/Makefile2
-rw-r--r--drivers/pci/host/pci-aardvark.c1001
-rw-r--r--drivers/pci/host/pci-dra7xx.c4
-rw-r--r--drivers/pci/host/pci-host-common.c44
-rw-r--r--drivers/pci/host/pci-host-generic.c13
-rw-r--r--drivers/pci/host/pci-hyperv.c30
-rw-r--r--drivers/pci/host/pci-keystone.c10
-rw-r--r--drivers/pci/host/pci-layerscape.c10
-rw-r--r--drivers/pci/host/pci-mvebu.c28
-rw-r--r--drivers/pci/host/pci-rcar-gen2.c27
-rw-r--r--drivers/pci/host/pci-tegra.c99
-rw-r--r--drivers/pci/host/pci-thunder-ecam.c11
-rw-r--r--drivers/pci/host/pci-thunder-pem.c14
-rw-r--r--drivers/pci/host/pci-versatile.c29
-rw-r--r--drivers/pci/host/pci-xgene.c24
-rw-r--r--drivers/pci/host/pcie-altera.c83
-rw-r--r--drivers/pci/host/pcie-armada8k.c14
-rw-r--r--drivers/pci/host/pcie-artpec6.c280
-rw-r--r--drivers/pci/host/pcie-designware-plat.c10
-rw-r--r--drivers/pci/host/pcie-designware.c34
-rw-r--r--drivers/pci/host/pcie-hisi.c13
-rw-r--r--drivers/pci/host/pcie-iproc.c4
-rw-r--r--drivers/pci/host/pcie-rcar.c44
-rw-r--r--drivers/pci/host/pcie-xilinx-nwl.c20
-rw-r--r--drivers/pci/host/pcie-xilinx.c22
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c4
-rw-r--r--drivers/pci/hotplug/pciehp_hpc.c4
-rw-r--r--drivers/pci/msi.c266
-rw-r--r--drivers/pci/pci-driver.c5
-rw-r--r--drivers/pci/pci-sysfs.c5
-rw-r--r--drivers/pci/pci.c281
-rw-r--r--drivers/pci/pci.h11
-rw-r--r--drivers/pci/pcie/Kconfig5
-rw-r--r--drivers/pci/pcie/aspm.c2
-rw-r--r--drivers/pci/pcie/pcie-dpc.c19
-rw-r--r--drivers/pci/pcie/portdrv_core.c3
-rw-r--r--drivers/pci/pcie/portdrv_pci.c52
-rw-r--r--drivers/pci/probe.c22
-rw-r--r--drivers/pci/proc.c9
-rw-r--r--drivers/pci/quirks.c17
-rw-r--r--drivers/pci/remove.c2
-rw-r--r--drivers/pci/setup-bus.c68
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c15
-rw-r--r--drivers/usb/host/xhci-pci.c2
-rw-r--r--include/linux/pci-acpi.h2
-rw-r--r--include/linux/pci-ecam.h (renamed from drivers/pci/ecam.h)4
-rw-r--r--include/linux/pci.h93
87 files changed, 3014 insertions, 1176 deletions
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 1179850f453c..c55df2911136 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -78,422 +78,111 @@ CONFIG_PCI_MSI option.
4.2 Using MSI
-Most of the hard work is done for the driver in the PCI layer. It simply
-has to request that the PCI layer set up the MSI capability for this
+Most of the hard work is done for the driver in the PCI layer. The driver
+simply has to request that the PCI layer set up the MSI capability for this
device.
-4.2.1 pci_enable_msi
+To automatically use MSI or MSI-X interrupt vectors, use the following
+function:
-int pci_enable_msi(struct pci_dev *dev)
+ int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
+ unsigned int max_vecs, unsigned int flags);
-A successful call allocates ONE interrupt to the device, regardless
-of how many MSIs the device supports. The device is switched from
-pin-based interrupt mode to MSI mode. The dev->irq number is changed
-to a new number which represents the message signaled interrupt;
-consequently, this function should be called before the driver calls
-request_irq(), because an MSI is delivered via a vector that is
-different from the vector of a pin-based interrupt.
+which allocates up to max_vecs interrupt vectors for a PCI device. It
+returns the number of vectors allocated or a negative error. If the device
+has a requirements for a minimum number of vectors the driver can pass a
+min_vecs argument set to this limit, and the PCI core will return -ENOSPC
+if it can't meet the minimum number of vectors.
-4.2.2 pci_enable_msi_range
+The flags argument should normally be set to 0, but can be used to pass the
+PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support
+MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in
+case the device does not support legacy interrupt lines.
-int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
+By default this function will spread the interrupts around the available
+CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY
+flag.
-This function allows a device driver to request any number of MSI
-interrupts within specified range from 'minvec' to 'maxvec'.
+To get the Linux IRQ numbers passed to request_irq() and free_irq() and the
+vectors, use the following function:
-If this function returns a positive number it indicates the number of
-MSI interrupts that have been successfully allocated. In this case
-the device is switched from pin-based interrupt mode to MSI mode and
-updates dev->irq to be the lowest of the new interrupts assigned to it.
-The other interrupts assigned to the device are in the range dev->irq
-to dev->irq + returned value - 1. Device driver can use the returned
-number of successfully allocated MSI interrupts to further allocate
-and initialize device resources.
+ int pci_irq_vector(struct pci_dev *dev, unsigned int nr);
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.
+Any allocated resources should be freed before removing the device using
+the following function:
-This function should be called before the driver calls request_irq(),
-because MSI interrupts are delivered via vectors that are different
-from the vector of a pin-based interrupt.
+ void pci_free_irq_vectors(struct pci_dev *dev);
-It is ideal if drivers can cope with a variable number of MSI interrupts;
-there are many reasons why the platform may not be able to provide the
-exact number that a driver asks for.
+If a device supports both MSI-X and MSI capabilities, this API will use the
+MSI-X facilities in preference to the MSI facilities. MSI-X supports any
+number of interrupts between 1 and 2048. In contrast, MSI is restricted to
+a maximum of 32 interrupts (and must be a power of two). In addition, the
+MSI interrupt vectors must be allocated consecutively, so the system might
+not be able to allocate as many vectors for MSI as it could for MSI-X. On
+some platforms, MSI interrupts must all be targeted at the same set of CPUs
+whereas MSI-X interrupts can all be targeted at different CPUs.
-There could be devices that can not operate with just any number of MSI
-interrupts within a range. See chapter 4.3.1.3 to get the idea how to
-handle such devices for MSI-X - the same logic applies to MSI.
+If a device supports neither MSI-X or MSI it will fall back to a single
+legacy IRQ vector.
-4.2.1.1 Maximum possible number of MSI interrupts
+The typical usage of MSI or MSI-X interrupts is to allocate as many vectors
+as possible, likely up to the limit supported by the device. If nvec is
+larger than the number supported by the device it will automatically be
+capped to the supported limit, so there is no need to query the number of
+vectors supported beforehand:
-The typical usage of MSI interrupts is to allocate as many vectors as
-possible, likely up to the limit returned by pci_msi_vec_count() function:
-
-static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
-{
- return pci_enable_msi_range(pdev, 1, nvec);
-}
-
-Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive,
-the value of 0 would be meaningless and could result in error.
-
-Some devices have a minimal limit on number of MSI interrupts.
-In this case the function could look like this:
-
-static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
-{
- return pci_enable_msi_range(pdev, FOO_DRIVER_MINIMUM_NVEC, nvec);
-}
-
-4.2.1.2 Exact number of MSI interrupts
+ nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0);
+ if (nvec < 0)
+ goto out_err;
If a driver is unable or unwilling to deal with a variable number of MSI
-interrupts it could request a particular number of interrupts by passing
-that number to pci_enable_msi_range() function as both 'minvec' and 'maxvec'
-parameters:
-
-static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
-{
- return pci_enable_msi_range(pdev, nvec, nvec);
-}
-
-Note, unlike pci_enable_msi_exact() function, which could be also used to
-enable a particular number of MSI-X interrupts, pci_enable_msi_range()
-returns either a negative errno or 'nvec' (not negative errno or 0 - as
-pci_enable_msi_exact() does).
-
-4.2.1.3 Single MSI mode
-
-The most notorious example of the request type described above is
-enabling the single MSI mode for a device. It could be done by passing
-two 1s as 'minvec' and 'maxvec':
-
-static int foo_driver_enable_single_msi(struct pci_dev *pdev)
-{
- return pci_enable_msi_range(pdev, 1, 1);
-}
-
-Note, unlike pci_enable_msi() function, which could be also used to
-enable the single MSI mode, pci_enable_msi_range() returns either a
-negative errno or 1 (not negative errno or 0 - as pci_enable_msi()
-does).
-
-4.2.3 pci_enable_msi_exact
-
-int pci_enable_msi_exact(struct pci_dev *dev, int nvec)
-
-This variation on pci_enable_msi_range() call allows a device driver to
-request exactly 'nvec' MSIs.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.
-
-By contrast with pci_enable_msi_range() function, pci_enable_msi_exact()
-returns zero in case of success, which indicates MSI interrupts have been
-successfully allocated.
-
-4.2.4 pci_disable_msi
-
-void pci_disable_msi(struct pci_dev *dev)
-
-This function should be used to undo the effect of pci_enable_msi_range().
-Calling it restores dev->irq to the pin-based interrupt number and frees
-the previously allocated MSIs. The interrupts may subsequently be assigned
-to another device, so drivers should not cache the value of dev->irq.
-
-Before calling this function, a device driver must always call free_irq()
-on any interrupt for which it previously called request_irq().
-Failure to do so results in a BUG_ON(), leaving the device with
-MSI enabled and thus leaking its vector.
-
-4.2.4 pci_msi_vec_count
-
-int pci_msi_vec_count(struct pci_dev *dev)
-
-This function could be used to retrieve the number of MSI vectors the
-device requested (via the Multiple Message Capable register). The MSI
-specification only allows the returned value to be a power of two,
-up to a maximum of 2^5 (32).
-
-If this function returns a negative number, it indicates the device is
-not capable of sending MSIs.
-
-If this function returns a positive number, it indicates the maximum
-number of MSI interrupt vectors that could be allocated.
-
-4.3 Using MSI-X
-
-The MSI-X capability is much more flexible than the MSI capability.
-It supports up to 2048 interrupts, each of which can be controlled
-independently. To support this flexibility, drivers must use an array of
-`struct msix_entry':
-
-struct msix_entry {
- u16 vector; /* kernel uses to write alloc vector */
- u16 entry; /* driver uses to specify entry */
-};
-
-This allows for the device to use these interrupts in a sparse fashion;
-for example, it could use interrupts 3 and 1027 and yet allocate only a
-two-element array. The driver is expected to fill in the 'entry' value
-in each element of the array to indicate for which entries the kernel
-should assign interrupts; it is invalid to fill in two entries with the
-same number.
-
-4.3.1 pci_enable_msix_range
-
-int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
- int minvec, int maxvec)
-
-Calling this function asks the PCI subsystem to allocate any number of
-MSI-X interrupts within specified range from 'minvec' to 'maxvec'.
-The 'entries' argument is a pointer to an array of msix_entry structs
-which should be at least 'maxvec' entries in size.
-
-On success, the device is switched into MSI-X mode and the function
-returns the number of MSI-X interrupts that have been successfully
-allocated. In this case the 'vector' member in entries numbered from
-0 to the returned value - 1 is populated with the interrupt number;
-the driver should then call request_irq() for each 'vector' that it
-decides to use. The device driver is responsible for keeping track of the
-interrupts assigned to the MSI-X vectors so it can free them again later.
-Device driver can use the returned number of successfully allocated MSI-X
-interrupts to further allocate and initialize device resources.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to allocate any more MSI-X interrupts for
-this device.
-
-This function, in contrast with pci_enable_msi_range(), does not adjust
-dev->irq. The device will not generate interrupts for this interrupt
-number once MSI-X is enabled.
-
-Device drivers should normally call this function once per device
-during the initialization phase.
-
-It is ideal if drivers can cope with a variable number of MSI-X interrupts;
-there are many reasons why the platform may not be able to provide the
-exact number that a driver asks for.
-
-There could be devices that can not operate with just any number of MSI-X
-interrupts within a range. E.g., an network adapter might need let's say
-four vectors per each queue it provides. Therefore, a number of MSI-X
-interrupts allocated should be a multiple of four. In this case interface
-pci_enable_msix_range() can not be used alone to request MSI-X interrupts
-(since it can allocate any number within the range, without any notion of
-the multiple of four) and the device driver should master a custom logic
-to request the required number of MSI-X interrupts.
-
-4.3.1.1 Maximum possible number of MSI-X interrupts
-
-The typical usage of MSI-X interrupts is to allocate as many vectors as
-possible, likely up to the limit returned by pci_msix_vec_count() function:
-
-static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
-{
- return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
- 1, nvec);
-}
-
-Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive,
-the value of 0 would be meaningless and could result in error.
-
-Some devices have a minimal limit on number of MSI-X interrupts.
-In this case the function could look like this:
-
-static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
-{
- return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
- FOO_DRIVER_MINIMUM_NVEC, nvec);
-}
-
-4.3.1.2 Exact number of MSI-X interrupts
-
-If a driver is unable or unwilling to deal with a variable number of MSI-X
-interrupts it could request a particular number of interrupts by passing
-that number to pci_enable_msix_range() function as both 'minvec' and 'maxvec'
-parameters:
-
-static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
-{
- return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
- nvec, nvec);
-}
-
-Note, unlike pci_enable_msix_exact() function, which could be also used to
-enable a particular number of MSI-X interrupts, pci_enable_msix_range()
-returns either a negative errno or 'nvec' (not negative errno or 0 - as
-pci_enable_msix_exact() does).
-
-4.3.1.3 Specific requirements to the number of MSI-X interrupts
-
-As noted above, there could be devices that can not operate with just any
-number of MSI-X interrupts within a range. E.g., let's assume a device that
-is only capable sending the number of MSI-X interrupts which is a power of
-two. A routine that enables MSI-X mode for such device might look like this:
-
-/*
- * Assume 'minvec' and 'maxvec' are non-zero
- */
-static int foo_driver_enable_msix(struct foo_adapter *adapter,
- int minvec, int maxvec)
-{
- int rc;
-
- minvec = roundup_pow_of_two(minvec);
- maxvec = rounddown_pow_of_two(maxvec);
-
- if (minvec > maxvec)
- return -ERANGE;
-
-retry:
- rc = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
- maxvec, maxvec);
- /*
- * -ENOSPC is the only error code allowed to be analyzed
- */
- if (rc == -ENOSPC) {
- if (maxvec == 1)
- return -ENOSPC;
-
- maxvec /= 2;
-
- if (minvec > maxvec)
- return -ENOSPC;
-
- goto retry;
- }
-
- return rc;
-}
-
-Note how pci_enable_msix_range() return value is analyzed for a fallback -
-any error code other than -ENOSPC indicates a fatal error and should not
-be retried.
-
-4.3.2 pci_enable_msix_exact
-
-int pci_enable_msix_exact(struct pci_dev *dev,
- struct msix_entry *entries, int nvec)
-
-This variation on pci_enable_msix_range() call allows a device driver to
-request exactly 'nvec' MSI-Xs.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to allocate any more MSI-X interrupts for
-this device.
-
-By contrast with pci_enable_msix_range() function, pci_enable_msix_exact()
-returns zero in case of success, which indicates MSI-X interrupts have been
-successfully allocated.
-
-Another version of a routine that enables MSI-X mode for a device with
-specific requirements described in chapter 4.3.1.3 might look like this:
-
-/*
- * Assume 'minvec' and 'maxvec' are non-zero
- */
-static int foo_driver_enable_msix(struct foo_adapter *adapter,
- int minvec, int maxvec)
-{
- int rc;
-
- minvec = roundup_pow_of_two(minvec);
- maxvec = rounddown_pow_of_two(maxvec);
-
- if (minvec > maxvec)
- return -ERANGE;
-
-retry:
- rc = pci_enable_msix_exact(adapter->pdev,
- adapter->msix_entries, maxvec);
-
- /*
- * -ENOSPC is the only error code allowed to be analyzed
- */
- if (rc == -ENOSPC) {
- if (maxvec == 1)
- return -ENOSPC;
-
- maxvec /= 2;
-
- if (minvec > maxvec)
- return -ENOSPC;
-
- goto retry;
- } else if (rc < 0) {
- return rc;
- }
-
- return maxvec;
-}
-
-4.3.3 pci_disable_msix
-
-void pci_disable_msix(struct pci_dev *dev)
-
-This function should be used to undo the effect of pci_enable_msix_range().
-It frees the previously allocated MSI-X interrupts. The interrupts may
-subsequently be assigned to another device, so drivers should not cache
-the value of the 'vector' elements over a call to pci_disable_msix().
-
-Before calling this function, a device driver must always call free_irq()
-on any interrupt for which it previously called request_irq().
-Failure to do so results in a BUG_ON(), leaving the device with
-MSI-X enabled and thus leaking its vector.
-
-4.3.3 The MSI-X Table
-
-The MSI-X capability specifies a BAR and offset within that BAR for the
-MSI-X Table. This address is mapped by the PCI subsystem, and should not
-be accessed directly by the device driver. If the driver wishes to
-mask or unmask an interrupt, it should call disable_irq() / enable_irq().
+interrupts it can request a particular number of interrupts by passing that
+number to pci_alloc_irq_vectors() function as both 'min_vecs' and
+'max_vecs' parameters:
-4.3.4 pci_msix_vec_count
+ ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0);
+ if (ret < 0)
+ goto out_err;
-int pci_msix_vec_count(struct pci_dev *dev)
+The most notorious example of the request type described above is enabling
+the single MSI mode for a device. It could be done by passing two 1s as
+'min_vecs' and 'max_vecs':
-This function could be used to retrieve number of entries in the device
-MSI-X table.
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, 0);
+ if (ret < 0)
+ goto out_err;
-If this function returns a negative number, it indicates the device is
-not capable of sending MSI-Xs.
+Some devices might not support using legacy line interrupts, in which case
+the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform
+can't provide MSI or MSI-X interrupts:
-If this function returns a positive number, it indicates the maximum
-number of MSI-X interrupt vectors that could be allocated.
+ nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY);
+ if (nvec < 0)
+ goto out_err;
-4.4 Handling devices implementing both MSI and MSI-X capabilities
+4.3 Legacy APIs
-If a device implements both MSI and MSI-X capabilities, it can
-run in either MSI mode or MSI-X mode, but not both simultaneously.
-This is a requirement of the PCI spec, and it is enforced by the
-PCI layer. Calling pci_enable_msi_range() when MSI-X is already
-enabled or pci_enable_msix_range() when MSI is already enabled
-results in an error. If a device driver wishes to switch between MSI
-and MSI-X at runtime, it must first quiesce the device, then switch
-it back to pin-interrupt mode, before calling pci_enable_msi_range()
-or pci_enable_msix_range() and resuming operation. This is not expected
-to be a common operation but may be useful for debugging or testing
-during development.
+The following old APIs to enable and disable MSI or MSI-X interrupts should
+not be used in new code:
-4.5 Considerations when using MSIs
+ pci_enable_msi() /* deprecated */
+ pci_enable_msi_range() /* deprecated */
+ pci_enable_msi_exact() /* deprecated */
+ pci_disable_msi() /* deprecated */
+ pci_enable_msix_range() /* deprecated */
+ pci_enable_msix_exact() /* deprecated */
+ pci_disable_msix() /* deprecated */
-4.5.1 Choosing between MSI-X and MSI
+Additionally there are APIs to provide the number of supported MSI or MSI-X
+vectors: pci_msi_vec_count() and pci_msix_vec_count(). In general these
+should be avoided in favor of letting pci_alloc_irq_vectors() cap the
+number of vectors. If you have a legitimate special use case for the count
+of vectors we might have to revisit that decision and add a
+pci_nr_irq_vectors() helper that handles MSI and MSI-X transparently.
-If your device supports both MSI-X and MSI capabilities, you should use
-the MSI-X facilities in preference to the MSI facilities. As mentioned
-above, MSI-X supports any number of interrupts between 1 and 2048.
-In contrast, MSI is restricted to a maximum of 32 interrupts (and
-must be a power of two). In addition, the MSI interrupt vectors must
-be allocated consecutively, so the system might not be able to allocate
-as many vectors for MSI as it could for MSI-X. On some platforms, MSI
-interrupts must all be targeted at the same set of CPUs whereas MSI-X
-interrupts can all be targeted at different CPUs.
+4.4 Considerations when using MSIs
-4.5.2 Spinlocks
+4.4.1 Spinlocks
Most device drivers have a per-device spinlock which is taken in the
interrupt handler. With pin-based interrupts or a single MSI, it is not
@@ -505,7 +194,7 @@ acquire the spinlock. Such deadlocks can be avoided by using
spin_lock_irqsave() or spin_lock_irq() which disable local interrupts
and acquire the lock (see Documentation/DocBook/kernel-locking).
-4.6 How to tell whether MSI/MSI-X is enabled on a device
+4.5 How to tell whether MSI/MSI-X is enabled on a device
Using 'lspci -v' (as root) may show some devices with "MSI", "Message
Signalled Interrupts" or "MSI-X" capabilities. Each of these capabilities
diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
new file mode 100644
index 000000000000..bbcd9f4c501f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -0,0 +1,56 @@
+Aardvark PCIe controller
+
+This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC.
+
+The Device Tree node describing an Aardvark PCIe controller must
+contain the following properties:
+
+ - compatible: Should be "marvell,armada-3700-pcie"
+ - reg: range of registers for the PCIe controller
+ - interrupts: the interrupt line of the PCIe controller
+ - #address-cells: set to <3>
+ - #size-cells: set to <2>
+ - device_type: set to "pci"
+ - ranges: ranges for the PCI memory and I/O regions
+ - #interrupt-cells: set to <1>
+ - msi-controller: indicates that the PCIe controller can itself
+ handle MSI interrupts
+ - msi-parent: pointer to the MSI controller to be used
+ - interrupt-map-mask and interrupt-map: standard PCI properties to
+ define the mapping of the PCIe interface to interrupt numbers.
+ - bus-range: PCI bus numbers covered
+
+In addition, the Device Tree describing an Aardvark PCIe controller
+must include a sub-node that describes the legacy interrupt controller
+built into the PCIe controller. This sub-node must have the following
+properties:
+
+ - interrupt-controller
+ - #interrupt-cells: set to <1>
+
+Example:
+
+ pcie0: pcie@d0070000 {
+ compatible = "marvell,armada-3700-pcie";
+ device_type = "pci";
+ status = "disabled";
+ reg = <0 0xd0070000 0 0x20000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ msi-controller;
+ msi-parent = <&pcie0>;
+ ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */
+ 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
new file mode 100644
index 000000000000..330a45b5f0b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -0,0 +1,46 @@
+* Axis ARTPEC-6 PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "axis,artpec6-pcie", "snps,dw-pcie"
+- reg: base addresses and lengths of the PCIe controller (DBI),
+ the phy controller, and configuration address space.
+- reg-names: Must include the following entries:
+ - "dbi"
+ - "phy"
+ - "config"
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+ - "msi": The interrupt that is asserted when an MSI is received
+- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
+ used to enable and control the Synopsys IP.
+
+Example:
+
+ pcie@f8050000 {
+ compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+ reg = <0xf8050000 0x2000
+ 0xf8040000 0x1000
+ 0xc0000000 0x1000>;
+ reg-names = "dbi", "phy", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ /* downstream I/O */
+ ranges = <0x81000000 0 0x00010000 0xc0010000 0 0x00010000
+ /* non-prefetchable memory */
+ 0x82000000 0 0xc0020000 0xc0020000 0 0x1ffe0000>;
+ num-lanes = <2>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ axis,syscon-pcie = <&syscon>;
+ };
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e24aa11e8f8a..642029012059 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3021,6 +3021,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
resource_alignment=
Format:
[<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
+ [<order of align>@]pci:<vendor>:<device>\
+ [:<subvendor>:<subdevice>][; ...]
Specifies alignment and device to reassign
aligned memory resources.
If <order of align> is not specified,
@@ -3039,6 +3041,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
hpmemsize=nn[KMG] The fixed amount of bus space which is
reserved for hotplug bridge's memory window.
Default size is 2 megabytes.
+ hpbussize=nn The minimum amount of additional bus numbers
+ reserved for buses below a hotplug bridge.
+ Default is 1.
realloc= Enable/disable reallocating PCI bridge resources
if allocations done by BIOS are too small to
accommodate resources required by all child
@@ -3070,6 +3075,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
ports driver.
+ pcie_port_pm= [PCIE] PCIe port power management handling:
+ off Disable power management of all PCIe ports
+ force Forcibly enable power management of all PCIe ports
+
pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
nomsi Do not use MSI for native PCIe PME signaling (this makes
all PCIe root ports use INTx for all services).
diff --git a/MAINTAINERS b/MAINTAINERS
index 8f950e2752de..10074ff03c57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8883,6 +8883,7 @@ L: linux-pci@vger.kernel.org
Q: http://patchwork.ozlabs.org/project/linux-pci/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
S: Supported
+F: Documentation/devicetree/bindings/pci/
F: Documentation/PCI/
F: drivers/pci/
F: include/linux/pci*
@@ -8946,6 +8947,13 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/*mvebu*
+PCI DRIVER FOR AARDVARK (Marvell Armada 3700)
+M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: drivers/pci/host/pci-aardvark.c
+
PCI DRIVER FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
L: linux-tegra@vger.kernel.org
@@ -9028,6 +9036,15 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
F: drivers/pci/host/pci-xgene-msi.c
+PCIE DRIVER FOR AXIS ARTPEC
+M: Niklas Cassel <niklas.cassel@axis.com>
+M: Jesper Nilsson <jesper.nilsson@axis.com>
+L: linux-arm-kernel@axis.com
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/axis,artpec*
+F: drivers/pci/host/*artpec*
+
PCIE DRIVER FOR HISILICON
M: Zhou Wang <wangzhou1@hisilicon.com>
M: Gabriele Paoloni <gabriele.paoloni@huawei.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fc3dc0b90be2..2d601d769a1c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -700,7 +700,7 @@ config ARCH_VIRT
depends on ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
- select ARM_GIC_V2M if PCI_MSI
+ select ARM_GIC_V2M if PCI
select ARM_GIC_V3
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 0070e8520cd4..2d88af5be45f 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -22,6 +22,7 @@ struct hw_pci {
struct msi_controller *msi_ctrl;
struct pci_ops *ops;
int nr_controllers;
+ unsigned int io_optional:1;
void **private_data;
int (*setup)(int nr, struct pci_sys_data *);
struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 05e61a2eeabe..2f0e07735d1d 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -410,7 +410,8 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
return irq;
}
-static int pcibios_init_resources(int busnr, struct pci_sys_data *sys)
+static int pcibios_init_resource(int busnr, struct pci_sys_data *sys,
+ int io_optional)
{
int ret;
struct resource_entry *window;
@@ -420,6 +421,14 @@ static int pcibios_init_resources(int busnr, struct pci_sys_data *sys)
&iomem_resource, sys->mem_offset);
}
+ /*
+ * If a platform says I/O port support is optional, we don't add
+ * the default I/O space. The platform is responsible for adding
+ * any I/O space it needs.
+ */
+ if (io_optional)
+ return 0;
+
resource_list_for_each_entry(window, &sys->resources)
if (resource_type(window->res) == IORESOURCE_IO)
return 0;
@@ -466,7 +475,7 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
if (ret > 0) {
struct pci_host_bridge *host_bridge;
- ret = pcibios_init_resources(nr, sys);
+ ret = pcibios_init_resource(nr, sys, hw->io_optional);
if (ret) {
kfree(sys);
break;
@@ -515,25 +524,23 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
list_for_each_entry(sys, &head, node) {
struct pci_bus *bus = sys->bus;
- if (!pci_has_flag(PCI_PROBE_ONLY)) {
+ /*
+ * We insert PCI resources into the iomem_resource and
+ * ioport_resource trees in either pci_bus_claim_resources()
+ * or pci_bus_assign_resources().
+ */
+ if (pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_claim_resources(bus);
+ } else {
struct pci_bus *child;
- /*
- * Size the bridge windows.
- */
pci_bus_size_bridges(bus);
-
- /*
- * Assign resources.
- */
pci_bus_assign_resources(bus);
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
}
- /*
- * Tell drivers about devices found.
- */
+
pci_bus_add_devices(bus);
}
}
@@ -590,18 +597,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
return start;
}
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- if (pci_has_flag(PCI_PROBE_ONLY))
- return 0;
-
- return pci_enable_resources(dev, mask);
-}
-
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1b06db571fff..69c8787bec7d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -3,6 +3,7 @@ config ARM64
select ACPI_CCA_REQUIRED if ACPI
select ACPI_GENERIC_GSI if ACPI
select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+ select ACPI_MCFG if ACPI
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@@ -22,9 +23,9 @@ config ARM64
select ARM_ARCH_TIMER
select ARM_GIC
select AUDIT_ARCH_COMPAT_GENERIC
- select ARM_GIC_V2M if PCI_MSI
+ select ARM_GIC_V2M if PCI
select ARM_GIC_V3
- select ARM_GIC_V3_ITS if PCI_MSI
+ select ARM_GIC_V3_ITS if PCI
select ARM_PSCI_FW
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
@@ -102,6 +103,7 @@ config ARM64
select OF_EARLY_FLATTREE
select OF_NUMA if NUMA && OF
select OF_RESERVED_MEM
+ select PCI_ECAM if ACPI
select PERF_USE_VMALLOC
select POWER_RESET
select POWER_SUPPLY
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 86110a6ae330..1372e9a6aaa4 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -76,3 +76,8 @@
&usb3 {
status = "okay";
};
+
+/* CON17 (PCIe) / CON12 (mini-PCIe) */
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index eb29280962d7..c4762538ec01 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -176,5 +176,30 @@
<0x1d40000 0x40000>; /* GICR */
};
};
+
+ pcie0: pcie@d0070000 {
+ compatible = "marvell,armada-3700-pcie";
+ device_type = "pci";
+ status = "disabled";
+ reg = <0 0xd0070000 0 0x20000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ msi-parent = <&pcie0>;
+ msi-controller;
+ ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */
+ 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
};
};
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index 3c4e308b40a0..acf38722457b 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -17,6 +17,9 @@
#include <linux/mm.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
#include <linux/slab.h>
/*
@@ -36,25 +39,17 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
return res->start;
}
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- * @mask: bitmask of BARs to enable
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- if (pci_has_flag(PCI_PROBE_ONLY))
- return 0;
-
- return pci_enable_resources(dev, mask);
-}
-
/*
- * Try to assign the IRQ number from DT when adding a new device
+ * Try to assign the IRQ number when probing a new device
*/
-int pcibios_add_device(struct pci_dev *dev)
+int pcibios_alloc_irq(struct pci_dev *dev)
{
- dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+ if (acpi_disabled)
+ dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+#ifdef CONFIG_ACPI
+ else
+ return acpi_pci_irq_enable(dev);
+#endif
return 0;
}
@@ -65,13 +60,21 @@ int pcibios_add_device(struct pci_dev *dev)
int raw_pci_read(unsigned int domain, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *val)
{
- return -ENXIO;
+ struct pci_bus *b = pci_find_bus(domain, bus);
+
+ if (!b)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ return b->ops->read(b, devfn, reg, len, val);
}
int raw_pci_write(unsigned int domain, unsigned int bus,
unsigned int devfn, int reg, int len, u32 val)
{
- return -ENXIO;
+ struct pci_bus *b = pci_find_bus(domain, bus);
+
+ if (!b)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ return b->ops->write(b, devfn, reg, len, val);
}
#ifdef CONFIG_NUMA
@@ -85,10 +88,124 @@ EXPORT_SYMBOL(pcibus_to_node);
#endif
#ifdef CONFIG_ACPI
-/* Root bridge scanning */
+
+struct acpi_pci_generic_root_info {
+ struct acpi_pci_root_info common;
+ struct pci_config_window *cfg; /* config space mapping */
+};
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct acpi_device *adev = to_acpi_device(cfg->parent);
+ struct acpi_pci_root *root = acpi_driver_data(adev);
+
+ return root->segment;
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ if (!acpi_disabled) {
+ struct pci_config_window *cfg = bridge->bus->sysdata;
+ struct acpi_device *adev = to_acpi_device(cfg->parent);
+ ACPI_COMPANION_SET(&bridge->dev, adev);
+ }
+
+ return 0;
+}
+
+/*
+ * Lookup the bus range for the domain in MCFG, and set up config space
+ * mapping.
+ */
+static struct pci_config_window *
+pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
+{
+ struct resource *bus_res = &root->secondary;
+ u16 seg = root->segment;
+ struct pci_config_window *cfg;
+ struct resource cfgres;
+ unsigned int bsz;
+
+ /* Use address from _CBA if present, otherwise lookup MCFG */
+ if (!root->mcfg_addr)
+ root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
+
+ if (!root->mcfg_addr) {
+ dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n",
+ seg, bus_res);
+ return NULL;
+ }
+
+ bsz = 1 << pci_generic_ecam_ops.bus_shift;
+ cfgres.start = root->mcfg_addr + bus_res->start * bsz;
+ cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
+ cfgres.flags = IORESOURCE_MEM;
+ cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
+ &pci_generic_ecam_ops);
+ if (IS_ERR(cfg)) {
+ dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
+ seg, bus_res, PTR_ERR(cfg));
+ return NULL;
+ }
+
+ return cfg;
+}
+
+/* release_info: free resources allocated by init_info */
+static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
+{
+ struct acpi_pci_generic_root_info *ri;
+
+ ri = container_of(ci, struct acpi_pci_generic_root_info, common);
+ pci_ecam_free(ri->cfg);
+ kfree(ri);
+}
+
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
+ .release_info = pci_acpi_generic_release_info,
+};
+
+/* Interface called from ACPI code to setup PCI host controller */
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
- /* TODO: Should be revisited when implementing PCI on ACPI */
- return NULL;
+ int node = acpi_get_node(root->device->handle);
+ struct acpi_pci_generic_root_info *ri;
+ struct pci_bus *bus, *child;
+
+ ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node);
+ if (!ri)
+ return NULL;
+
+ ri->cfg = pci_acpi_setup_ecam_mapping(root);
+ if (!ri->cfg) {
+ kfree(ri);
+ return NULL;
+ }
+
+ acpi_pci_root_ops.pci_ops = &ri->cfg->ops->pci_ops;
+ bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &ri->common,
+ ri->cfg);
+ if (!bus)
+ return NULL;
+
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+
+ return bus;
}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+ acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+ acpi_pci_remove_bus(bus);
+}
+
#endif
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index fc3ecb55f1b2..2a120bb70e54 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -82,9 +82,6 @@ extern pgprot_t pci_phys_mem_access_prot(struct file *file,
pgprot_t prot);
#define HAVE_ARCH_PCI_RESOURCE_TO_USER
-extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
- const struct resource *rsrc,
- resource_size_t *start, resource_size_t *end);
extern void pcibios_setup_bus_devices(struct pci_bus *bus);
extern void pcibios_setup_bus_self(struct pci_bus *bus);
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 14cba600da7a..81556b843a8e 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -219,33 +219,6 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
}
/*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
- pgprot_t protection,
- enum pci_mmap_state mmap_state,
- int write_combine)
-{
- pgprot_t prot = protection;
-
- /* Write combine is always 0 on non-memory space mappings. On
- * memory space, if the user didn't pass 1, we check for a
- * "prefetchable" resource. This is a bit hackish, but we use
- * this to workaround the inability of /sysfs to provide a write
- * combine bit
- */
- if (mmap_state != pci_mmap_mem)
- write_combine = 0;
- else if (write_combine == 0) {
- if (rp->flags & IORESOURCE_PREFETCH)
- write_combine = 1;
- }
-
- return pgprot_noncached(prot);
-}
-
-/*
* This one is used by /dev/mem and fbdev who have no clue about the
* PCI device, it tries to find the PCI device first and calls the
* above routine
@@ -317,9 +290,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
return -EINVAL;
vma->vm_pgoff = offset >> PAGE_SHIFT;
- vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
- vma->vm_page_prot,
- mmap_state, write_combine);
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
@@ -473,39 +444,25 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
resource_size_t *start, resource_size_t *end)
{
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
- resource_size_t offset = 0;
+ struct pci_bus_region region;
- if (hose == NULL)
+ if (rsrc->flags & IORESOURCE_IO) {
+ pcibios_resource_to_bus(dev->bus, &region,
+ (struct resource *) rsrc);
+ *start = region.start;
+ *end = region.end;
return;
+ }
- if (rsrc->flags & IORESOURCE_IO)
- offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
- /* We pass a fully fixed up address to userland for MMIO instead of
- * a BAR value because X is lame and expects to be able to use that
- * to pass to /dev/mem !
+ /* We pass a CPU physical address to userland for MMIO instead of a
+ * BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem!
*
- * That means that we'll have potentially 64 bits values where some
- * userland apps only expect 32 (like X itself since it thinks only
- * Sparc has 64 bits MMIO) but if we don't do that, we break it on
- * 32 bits CHRPs :-(
- *
- * Hopefully, the sysfs insterface is immune to that gunk. Once X
- * has been fixed (and the fix spread enough), we can re-enable the
- * 2 lines below and pass down a BAR value to userland. In that case
- * we'll also have to re-enable the matching code in
- * __pci_mmap_make_offset().
- *
- * BenH.
+ * That means we may have 64-bit values where some apps only expect
+ * 32 (like X itself since it thinks only Sparc has 64-bit MMIO).
*/
-#if 0
- else if (rsrc->flags & IORESOURCE_MEM)
- offset = hose->pci_mem_offset;
-#endif
-
- *start = rsrc->start - offset;
- *end = rsrc->end - offset;
+ *start = rsrc->start;
+ *end = rsrc->end;
}
/**
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 86b239d9d75d..9b63cd41213d 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -80,16 +80,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
#define HAVE_ARCH_PCI_RESOURCE_TO_USER
-static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
- const struct resource *rsrc, resource_size_t *start,
- resource_size_t *end)
-{
- phys_addr_t size = resource_size(rsrc);
-
- *start = fixup_bigphys_addr(rsrc->start, size);
- *end = rsrc->start + size;
-}
-
/*
* Dynamic DMA mapping stuff.
* MIPS has everything mapped statically.
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index f1b11f0dea2d..b4c02f29663e 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -112,7 +112,14 @@ static void pcibios_scanbus(struct pci_controller *hose)
need_domain_info = 1;
}
- if (!pci_has_flag(PCI_PROBE_ONLY)) {
+ /*
+ * We insert PCI resources into the iomem_resource and
+ * ioport_resource trees in either pci_bus_claim_resources()
+ * or pci_bus_assign_resources().
+ */
+ if (pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_claim_resources(bus);
+ } else {
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
}
@@ -319,6 +326,16 @@ void pcibios_fixup_bus(struct pci_bus *bus)
EXPORT_SYMBOL(PCIBIOS_MIN_IO);
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+ const struct resource *rsrc, resource_size_t *start,
+ resource_size_t *end)
+{
+ phys_addr_t size = resource_size(rsrc);
+
+ *start = fixup_bigphys_addr(rsrc->start, size);
+ *end = rsrc->start + size;
+}
+
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index a6f3ac0d4602..e9bd6cf0212f 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -136,9 +136,6 @@ extern pgprot_t pci_phys_mem_access_prot(struct file *file,
pgprot_t prot);
#define HAVE_ARCH_PCI_RESOURCE_TO_USER
-extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
- const struct resource *rsrc,
- resource_size_t *start, resource_size_t *end);
extern resource_size_t pcibios_io_space_offset(struct pci_controller *hose);
extern void pcibios_setup_bus_devices(struct pci_bus *bus);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index f93942b4b6a6..a5c0153ede37 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -412,36 +412,6 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
}
/*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
- pgprot_t protection,
- enum pci_mmap_state mmap_state,
- int write_combine)
-{
-
- /* Write combine is always 0 on non-memory space mappings. On
- * memory space, if the user didn't pass 1, we check for a
- * "prefetchable" resource. This is a bit hackish, but we use
- * this to workaround the inability of /sysfs to provide a write
- * combine bit
- */
- if (mmap_state != pci_mmap_mem)
- write_combine = 0;
- else if (write_combine == 0) {
- if (rp->flags & IORESOURCE_PREFETCH)
- write_combine = 1;
- }
-
- /* XXX would be nice to have a way to ask for write-through */
- if (write_combine)
- return pgprot_noncached_wc(protection);
- else
- return pgprot_noncached(protection);
-}
-
-/*
* This one is used by /dev/mem and fbdev who have no clue about the
* PCI device, it tries to find the PCI device first and calls the
* above routine
@@ -514,9 +484,10 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
return -EINVAL;
vma->vm_pgoff = offset >> PAGE_SHIFT;
- vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
- vma->vm_page_prot,
- mmap_state, write_combine);
+ if (write_combine)
+ vma->vm_page_prot = pgprot_noncached_wc(vma->vm_page_prot);
+ else
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
@@ -666,39 +637,25 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
resource_size_t *start, resource_size_t *end)
{
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
- resource_size_t offset = 0;
+ struct pci_bus_region region;
- if (hose == NULL)
+ if (rsrc->flags & IORESOURCE_IO) {
+ pcibios_resource_to_bus(dev->bus, &region,
+ (struct resource *) rsrc);
+ *start = region.start;
+ *end = region.end;
return;
+ }
- if (rsrc->flags & IORESOURCE_IO)
- offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
- /* We pass a fully fixed up address to userland for MMIO instead of
- * a BAR value because X is lame and expects to be able to use that
- * to pass to /dev/mem !
- *
- * That means that we'll have potentially 64 bits values where some
- * userland apps only expect 32 (like X itself since it thinks only
- * Sparc has 64 bits MMIO) but if we don't do that, we break it on
- * 32 bits CHRPs :-(
- *
- * Hopefully, the sysfs insterface is immune to that gunk. Once X
- * has been fixed (and the fix spread enough), we can re-enable the
- * 2 lines below and pass down a BAR value to userland. In that case
- * we'll also have to re-enable the matching code in
- * __pci_mmap_make_offset().
+ /* We pass a CPU physical address to userland for MMIO instead of a
+ * BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem!
*
- * BenH.
+ * That means we may have 64-bit values where some apps only expect
+ * 32 (like X itself since it thinks only Sparc has 64-bit MMIO).
*/
-#if 0
- else if (rsrc->flags & IORESOURCE_MEM)
- offset = hose->pci_mem_offset;
-#endif
-
- *start = rsrc->start - offset;
- *end = rsrc->end - offset;
+ *start = rsrc->start;
+ *end = rsrc->end;
}
/**
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 022d16008a00..2303635158f5 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -55,9 +55,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
}
#define HAVE_ARCH_PCI_RESOURCE_TO_USER
-void pci_resource_to_user(const struct pci_dev *dev, int bar,
- const struct resource *rsrc,
- resource_size_t *start, resource_size_t *end);
#endif /* __KERNEL__ */
#endif /* __SPARC64_PCI_H */
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index c2b202d763a1..9c1878f4fa9f 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -986,16 +986,18 @@ void pci_resource_to_user(const struct pci_dev *pdev, int bar,
const struct resource *rp, resource_size_t *start,
resource_size_t *end)
{
- struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
- unsigned long offset;
-
- if (rp->flags & IORESOURCE_IO)
- offset = pbm->io_space.start;
- else
- offset = pbm->mem_space.start;
+ struct pci_bus_region region;
- *start = rp->start - offset;
- *end = rp->end - offset;
+ /*
+ * "User" addresses are shown in /sys/devices/pci.../.../resource
+ * and /proc/bus/pci/devices and used as mmap offsets for
+ * /proc/bus/pci/BB/DD.F files (see proc_bus_pci_mmap()).
+ *
+ * On sparc, these are PCI bus addresses, i.e., raw BAR values.
+ */
+ pcibios_resource_to_bus(pdev->bus, &region, (struct resource *) rp);
+ *start = region.start;
+ *end = region.end;
}
void pcibios_set_master(struct pci_dev *dev)
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
index d45fa5f3e9c4..62137d13c6f9 100644
--- a/arch/unicore32/kernel/pci.c
+++ b/arch/unicore32/kernel/pci.c
@@ -265,10 +265,8 @@ static int __init pci_common_init(void)
pci_fixup_irqs(pci_common_swizzle, pci_puv3_map_irq);
- if (!pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_size_bridges(puv3_bus);
- pci_bus_assign_resources(puv3_bus);
- }
+ pci_bus_size_bridges(puv3_bus);
+ pci_bus_assign_resources(puv3_bus);
pci_bus_add_devices(puv3_bus);
return 0;
}
@@ -279,9 +277,6 @@ char * __init pcibios_setup(char *str)
if (!strcmp(str, "debug")) {
debug_pci = 1;
return NULL;
- } else if (!strcmp(str, "firmware")) {
- pci_add_flags(PCI_PROBE_ONLY);
- return NULL;
}
return str;
}
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 8196054fedb0..7b6a9d14c8c0 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -133,7 +133,7 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev)
if (pci_probe & PCI_NOASSIGN_BARS) {
/*
* If the BIOS did not assign the BAR, zero out the
- * resource so the kernel doesn't attmept to assign
+ * resource so the kernel doesn't attempt to assign
* it later on in pci_assign_unassigned_resources
*/
for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
diff --git a/arch/x86/pci/vmd.c b/arch/x86/pci/vmd.c
index 613cac7395c4..e88b4176260f 100644
--- a/arch/x86/pci/vmd.c
+++ b/arch/x86/pci/vmd.c
@@ -119,10 +119,11 @@ static void vmd_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
static void vmd_irq_enable(struct irq_data *data)
{
struct vmd_irq *vmdirq = data->chip_data;
+ unsigned long flags;
- raw_spin_lock(&list_lock);
+ raw_spin_lock_irqsave(&list_lock, flags);
list_add_tail_rcu(&vmdirq->node, &vmdirq->irq->irq_list);
- raw_spin_unlock(&list_lock);
+ raw_spin_unlock_irqrestore(&list_lock, flags);
data->chip->irq_unmask(data);
}
@@ -130,12 +131,14 @@ static void vmd_irq_enable(struct irq_data *data)
static void vmd_irq_disable(struct irq_data *data)
{
struct vmd_irq *vmdirq = data->chip_data;
+ unsigned long flags;
data->chip->irq_mask(data);
- raw_spin_lock(&list_lock);
+ raw_spin_lock_irqsave(&list_lock, flags);
list_del_rcu(&vmdirq->node);
- raw_spin_unlock(&list_lock);
+ INIT_LIST_HEAD_RCU(&vmdirq->node);
+ raw_spin_unlock_irqrestore(&list_lock, flags);
}
/*
@@ -166,16 +169,20 @@ static irq_hw_number_t vmd_get_hwirq(struct msi_domain_info *info,
* XXX: We can be even smarter selecting the best IRQ once we solve the
* affinity problem.
*/
-static struct vmd_irq_list *vmd_next_irq(struct vmd_dev *vmd)
+static struct vmd_irq_list *vmd_next_irq(struct vmd_dev *vmd, struct msi_desc *desc)
{
- int i, best = 0;
+ int i, best = 1;
+ unsigned long flags;
- raw_spin_lock(&list_lock);
+ if (!desc->msi_attrib.is_msix || vmd->msix_count == 1)
+ return &vmd->irqs[0];
+
+ raw_spin_lock_irqsave(&list_lock, flags);
for (i = 1; i < vmd->msix_count; i++)
if (vmd->irqs[i].count < vmd->irqs[best].count)
best = i;
vmd->irqs[best].count++;
- raw_spin_unlock(&list_lock);
+ raw_spin_unlock_irqrestore(&list_lock, flags);
return &vmd->irqs[best];
}
@@ -184,14 +191,15 @@ static int vmd_msi_init(struct irq_domain *domain, struct msi_domain_info *info,
unsigned int virq, irq_hw_number_t hwirq,
msi_alloc_info_t *arg)
{
- struct vmd_dev *vmd = vmd_from_bus(msi_desc_to_pci_dev(arg->desc)->bus);
+ struct msi_desc *desc = arg->desc;
+ struct vmd_dev *vmd = vmd_from_bus(msi_desc_to_pci_dev(desc)->bus);
struct vmd_irq *vmdirq = kzalloc(sizeof(*vmdirq), GFP_KERNEL);
if (!vmdirq)
return -ENOMEM;
INIT_LIST_HEAD(&vmdirq->node);
- vmdirq->irq = vmd_next_irq(vmd);
+ vmdirq->irq = vmd_next_irq(vmd, desc);
vmdirq->virq = virq;
irq_domain_set_info(domain, virq, vmdirq->irq->vmd_vector, info->chip,
@@ -203,11 +211,12 @@ static void vmd_msi_free(struct irq_domain *domain,
struct msi_domain_info *info, unsigned int virq)
{
struct vmd_irq *vmdirq = irq_get_chip_data(virq);
+ unsigned long flags;
/* XXX: Potential optimization to rebalance */
- raw_spin_lock(&list_lock);
+ raw_spin_lock_irqsave(&list_lock, flags);
vmdirq->irq->count--;
- raw_spin_unlock(&list_lock);
+ raw_spin_unlock_irqrestore(&list_lock, flags);
kfree_rcu(vmdirq, rcu);
}
@@ -261,7 +270,7 @@ static struct device *to_vmd_dev(struct device *dev)
static struct dma_map_ops *vmd_dma_ops(struct device *dev)
{
- return to_vmd_dev(dev)->archdata.dma_ops;
+ return get_dma_ops(to_vmd_dev(dev));
}
static void *vmd_alloc(struct device *dev, size_t size, dma_addr_t *addr,
@@ -367,7 +376,7 @@ static void vmd_teardown_dma_ops(struct vmd_dev *vmd)
{
struct dma_domain *domain = &vmd->dma_domain;
- if (vmd->dev->dev.archdata.dma_ops)
+ if (get_dma_ops(&vmd->dev->dev))
del_dma_domain(domain);
}
@@ -379,7 +388,7 @@ static void vmd_teardown_dma_ops(struct vmd_dev *vmd)
static void vmd_setup_dma_ops(struct vmd_dev *vmd)
{
- const struct dma_map_ops *source = vmd->dev->dev.archdata.dma_ops;
+ const struct dma_map_ops *source = get_dma_ops(&vmd->dev->dev);
struct dma_map_ops *dest = &vmd->dma_ops;
struct dma_domain *domain = &vmd->dma_domain;
@@ -594,7 +603,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
sd->node = pcibus_to_node(vmd->dev->bus);
vmd->irq_domain = pci_msi_create_irq_domain(NULL, &vmd_msi_domain_info,
- NULL);
+ x86_vector_domain);
if (!vmd->irq_domain)
return -ENODEV;
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index aebd944bdaa1..445ce28475b3 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -221,6 +221,9 @@ config ACPI_PROCESSOR_IDLE
bool
select CPU_IDLE
+config ACPI_MCFG
+ bool
+
config ACPI_CPPC_LIB
bool
depends on ACPI_PROCESSOR
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 35a6ccbe3025..5ae9d85c5159 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -40,6 +40,7 @@ acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
acpi-y += ec.o
acpi-$(CONFIG_ACPI_DOCK) += dock.o
acpi-y += pci_root.o pci_link.o pci_irq.o
+obj-$(CONFIG_ACPI_MCFG) += pci_mcfg.o
acpi-y += acpi_lpss.o acpi_apd.o
acpi-y += acpi_platform.o
acpi-y += acpi_pnp.o
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
new file mode 100644
index 000000000000..b5b376e081f5
--- /dev/null
+++ b/drivers/acpi/pci_mcfg.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ * Author: Jayachandran C <jchandra@broadcom.com>
+ * Copyright (C) 2016 Semihalf
+ * Author: Tomasz Nowicki <tn@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#define pr_fmt(fmt) "ACPI: " fmt
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+
+/* Structure to hold entries from the MCFG table */
+struct mcfg_entry {
+ struct list_head list;
+ phys_addr_t addr;
+ u16 segment;
+ u8 bus_start;
+ u8 bus_end;
+};
+
+/* List to save MCFG entries */
+static LIST_HEAD(pci_mcfg_list);
+
+phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
+{
+ struct mcfg_entry *e;
+
+ /*
+ * We expect exact match, unless MCFG entry end bus covers more than
+ * specified by caller.
+ */
+ list_for_each_entry(e, &pci_mcfg_list, list) {
+ if (e->segment == seg && e->bus_start == bus_res->start &&
+ e->bus_end >= bus_res->end)
+ return e->addr;
+ }
+
+ return 0;
+}
+
+static __init int pci_mcfg_parse(struct acpi_table_header *header)
+{
+ struct acpi_table_mcfg *mcfg;
+ struct acpi_mcfg_allocation *mptr;
+ struct mcfg_entry *e, *arr;
+ int i, n;
+
+ if (header->length < sizeof(struct acpi_table_mcfg))
+ return -EINVAL;
+
+ n = (header->length - sizeof(struct acpi_table_mcfg)) /
+ sizeof(struct acpi_mcfg_allocation);
+ mcfg = (struct acpi_table_mcfg *)header;
+ mptr = (struct acpi_mcfg_allocation *) &mcfg[1];
+
+ arr = kcalloc(n, sizeof(*arr), GFP_KERNEL);
+ if (!arr)
+ return -ENOMEM;
+
+ for (i = 0, e = arr; i < n; i++, mptr++, e++) {
+ e->segment = mptr->pci_segment;
+ e->addr = mptr->address;
+ e->bus_start = mptr->start_bus_number;
+ e->bus_end = mptr->end_bus_number;
+ list_add(&e->list, &pci_mcfg_list);
+ }
+
+ pr_info("MCFG table detected, %d entries\n", n);
+ return 0;
+}
+
+/* Interface called by ACPI - parse and save MCFG table */
+void __init pci_mmcfg_late_init(void)
+{
+ int err = acpi_table_parse(ACPI_SIG_MCFG, pci_mcfg_parse);
+ if (err)
+ pr_err("Failed to parse MCFG (%d)\n", err);
+}
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index ae3fe4e64203..d144168d4ef9 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -720,6 +720,36 @@ next:
}
}
+static void acpi_pci_root_remap_iospace(struct resource_entry *entry)
+{
+#ifdef PCI_IOBASE
+ struct resource *res = entry->res;
+ resource_size_t cpu_addr = res->start;
+ resource_size_t pci_addr = cpu_addr - entry->offset;
+ resource_size_t length = resource_size(res);
+ unsigned long port;
+
+ if (pci_register_io_range(cpu_addr, length))
+ goto err;
+
+ port = pci_address_to_pio(cpu_addr);
+ if (port == (unsigned long)-1)
+ goto err;
+
+ res->start = port;
+ res->end = port + length - 1;
+ entry->offset = port - pci_addr;
+
+ if (pci_remap_iospace(res, cpu_addr) < 0)
+ goto err;
+
+ pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res);
+ return;
+err:
+ res->flags |= IORESOURCE_DISABLED;
+#endif
+}
+
int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
{
int ret;
@@ -740,6 +770,9 @@ int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
"no IO and memory resources present in _CRS\n");
else {
resource_list_for_each_entry_safe(entry, tmp, list) {
+ if (entry->res->flags & IORESOURCE_IO)
+ acpi_pci_root_remap_iospace(entry);
+
if (entry->res->flags & IORESOURCE_DISABLED)
resource_list_destroy_entry(entry);
else
@@ -811,6 +844,8 @@ static void acpi_pci_root_release_info(struct pci_host_bridge *bridge)
resource_list_for_each_entry(entry, &bridge->windows) {
res = entry->res;
+ if (res->flags & IORESOURCE_IO)
+ pci_unmap_iospace(res);
if (res->parent &&
(res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
release_resource(res);
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 5495a5ba8039..7f8728984f44 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -21,9 +21,9 @@ config ARM_GIC_MAX_NR
config ARM_GIC_V2M
bool
- depends on ARM_GIC
- depends on PCI && PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI
+ select ARM_GIC
+ select PCI_MSI
config GIC_NON_BANKED
bool
@@ -37,7 +37,8 @@ config ARM_GIC_V3
config ARM_GIC_V3_ITS
bool
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI
+ depends on PCI_MSI
config ARM_NVIC
bool
@@ -62,13 +63,13 @@ config ARM_VIC_NR
config ARMADA_370_XP_IRQ
bool
select GENERIC_IRQ_CHIP
- select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+ select PCI_MSI if PCI
config ALPINE_MSI
bool
- depends on PCI && PCI_MSI
+ depends on PCI
+ select PCI_MSI
select GENERIC_IRQ_CHIP
- select PCI_MSI_IRQ_DOMAIN
config ATMEL_AIC_IRQ
bool
@@ -117,7 +118,6 @@ config HISILICON_IRQ_MBIGEN
bool
select ARM_GIC_V3
select ARM_GIC_V3_ITS
- select GENERIC_MSI_IRQ_DOMAIN
config IMGPDC_IRQ
bool
@@ -250,12 +250,10 @@ config IRQ_MXS
config MVEBU_ODMI
bool
- select GENERIC_MSI_IRQ_DOMAIN
config LS_SCFG_MSI
def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
depends on PCI && PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
config PARTITION_PERCPU
bool
diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c
index 4cf8f82cfca2..a70b853fa2c9 100644
--- a/drivers/misc/genwqe/card_base.c
+++ b/drivers/misc/genwqe/card_base.c
@@ -182,7 +182,7 @@ static void genwqe_dev_free(struct genwqe_dev *cd)
*/
static int genwqe_bus_reset(struct genwqe_dev *cd)
{
- int bars, rc = 0;
+ int rc = 0;
struct pci_dev *pci_dev = cd->pci_dev;
void __iomem *mmio;
@@ -193,8 +193,7 @@ static int genwqe_bus_reset(struct genwqe_dev *cd)
cd->mmio = NULL;
pci_iounmap(pci_dev, mmio);
- bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
- pci_release_selected_regions(pci_dev, bars);
+ pci_release_mem_regions(pci_dev);
/*
* Firmware/BIOS might change memory mapping during bus reset.
@@ -218,7 +217,7 @@ static int genwqe_bus_reset(struct genwqe_dev *cd)
GENWQE_INJECT_GFIR_FATAL |
GENWQE_INJECT_GFIR_INFO);
- rc = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name);
+ rc = pci_request_mem_regions(pci_dev, genwqe_driver_name);
if (rc) {
dev_err(&pci_dev->dev,
"[%s] err: request bars failed (%d)\n", __func__, rc);
@@ -1068,10 +1067,9 @@ static int genwqe_health_check_stop(struct genwqe_dev *cd)
*/
static int genwqe_pci_setup(struct genwqe_dev *cd)
{
- int err, bars;
+ int err;
struct pci_dev *pci_dev = cd->pci_dev;
- bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
err = pci_enable_device_mem(pci_dev);
if (err) {
dev_err(&pci_dev->dev,
@@ -1080,7 +1078,7 @@ static int genwqe_pci_setup(struct genwqe_dev *cd)
}
/* Reserve PCI I/O and memory resources */
- err = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name);
+ err = pci_request_mem_regions(pci_dev, genwqe_driver_name);
if (err) {
dev_err(&pci_dev->dev,
"[%s] err: request bars failed (%d)\n", __func__, err);
@@ -1142,7 +1140,7 @@ static int genwqe_pci_setup(struct genwqe_dev *cd)
out_iounmap:
pci_iounmap(pci_dev, cd->mmio);
out_release_resources:
- pci_release_selected_regions(pci_dev, bars);
+ pci_release_mem_regions(pci_dev);
err_disable_device:
pci_disable_device(pci_dev);
err_out:
@@ -1154,14 +1152,12 @@ static int genwqe_pci_setup(struct genwqe_dev *cd)
*/
static void genwqe_pci_remove(struct genwqe_dev *cd)
{
- int bars;
struct pci_dev *pci_dev = cd->pci_dev;
if (cd->mmio)
pci_iounmap(pci_dev, cd->mmio);
- bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
- pci_release_selected_regions(pci_dev, bars);
+ pci_release_mem_regions(pci_dev);
pci_disable_device(pci_dev);
}
diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index e708e360a9e3..6453148d066a 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -1251,7 +1251,7 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct alx_priv *alx;
struct alx_hw *hw;
bool phy_configured;
- int bars, err;
+ int err;
err = pci_enable_device_mem(pdev);
if (err)
@@ -1271,11 +1271,10 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
- bars = pci_select_bars(pdev, IORESOURCE_MEM);
- err = pci_request_selected_regions(pdev, bars, alx_drv_name);
+ err = pci_request_mem_regions(pdev, alx_drv_name);
if (err) {
dev_err(&pdev->dev,
- "pci_request_selected_regions failed(bars:%d)\n", bars);
+ "pci_request_mem_regions failed\n");
goto out_pci_disable;
}
@@ -1401,7 +1400,7 @@ out_unmap:
out_free_netdev:
free_netdev(netdev);
out_pci_release:
- pci_release_selected_regions(pdev, bars);
+ pci_release_mem_regions(pdev);
out_pci_disable:
pci_disable_device(pdev);
return err;
@@ -1420,8 +1419,7 @@ static void alx_remove(struct pci_dev *pdev)
unregister_netdev(alx->dev);
iounmap(hw->hw_addr);
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 41f32c0b341e..02f443958f31 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -7330,8 +7330,7 @@ err_flashmap:
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -7398,8 +7397,7 @@ static void e1000_remove(struct pci_dev *pdev)
if ((adapter->hw.flash_address) &&
(adapter->hw.mac.type < e1000_pch_spt))
iounmap(adapter->hw.flash_address);
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
free_netdev(netdev);
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index b8245c734c96..774a5654bf42 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -1963,10 +1963,7 @@ static int fm10k_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_dma;
}
- err = pci_request_selected_regions(pdev,
- pci_select_bars(pdev,
- IORESOURCE_MEM),
- fm10k_driver_name);
+ err = pci_request_mem_regions(pdev, fm10k_driver_name);
if (err) {
dev_err(&pdev->dev,
"pci_request_selected_regions failed: %d\n", err);
@@ -2070,8 +2067,7 @@ err_sw_init:
err_ioremap:
free_netdev(netdev);
err_alloc_netdev:
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -2119,8 +2115,7 @@ static void fm10k_remove(struct pci_dev *pdev)
free_netdev(netdev);
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
pci_disable_pcie_error_reporting(pdev);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 339d99be4702..81c99e1be708 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10710,8 +10710,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
/* set up pci connections */
- err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
- IORESOURCE_MEM), i40e_driver_name);
+ err = pci_request_mem_regions(pdev, i40e_driver_name);
if (err) {
dev_info(&pdev->dev,
"pci_request_selected_regions failed %d\n", err);
@@ -11208,8 +11207,7 @@ err_ioremap:
kfree(pf);
err_pf_alloc:
pci_disable_pcie_error_reporting(pdev);
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -11320,8 +11318,7 @@ static void i40e_remove(struct pci_dev *pdev)
iounmap(hw->hw_addr);
kfree(pf);
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 9bcba42abb91..942a89fb0090 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2324,9 +2324,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
- err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
- IORESOURCE_MEM),
- igb_driver_name);
+ err = pci_request_mem_regions(pdev, igb_driver_name);
if (err)
goto err_pci_reg;
@@ -2750,8 +2748,7 @@ err_sw_init:
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -2916,8 +2913,7 @@ static void igb_remove(struct pci_dev *pdev)
pci_iounmap(pdev, adapter->io_addr);
if (hw->flash_address)
iounmap(hw->flash_address);
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
kfree(adapter->shadow_vfta);
free_netdev(netdev);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 7871f538f0ad..5418c69a7463 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -9353,8 +9353,7 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_using_dac = 0;
}
- err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
- IORESOURCE_MEM), ixgbe_driver_name);
+ err = pci_request_mem_regions(pdev, ixgbe_driver_name);
if (err) {
dev_err(&pdev->dev,
"pci_request_selected_regions failed 0x%x\n", err);
@@ -9740,8 +9739,7 @@ err_ioremap:
disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state);
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
err_pci_reg:
err_dma:
if (!adapter || disable_dev)
@@ -9808,8 +9806,7 @@ static void ixgbe_remove(struct pci_dev *pdev)
#endif
iounmap(adapter->io_addr);
- pci_release_selected_regions(pdev, pci_select_bars(pdev,
- IORESOURCE_MEM));
+ pci_release_mem_regions(pdev);
e_dev_info("complete\n");
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 4cb9b156cab7..d7c33f9361aa 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1661,14 +1661,9 @@ static int nvme_pci_enable(struct nvme_dev *dev)
static void nvme_dev_unmap(struct nvme_dev *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev->dev);
- int bars;
-
if (dev->bar)
iounmap(dev->bar);
-
- bars = pci_select_bars(pdev, IORESOURCE_MEM);
- pci_release_selected_regions(pdev, bars);
+ pci_release_mem_regions(to_pci_dev(dev->dev));
}
static void nvme_pci_disable(struct nvme_dev *dev)
@@ -1897,13 +1892,9 @@ static const struct nvme_ctrl_ops nvme_pci_ctrl_ops = {
static int nvme_dev_map(struct nvme_dev *dev)
{
- int bars;
struct pci_dev *pdev = to_pci_dev(dev->dev);
- bars = pci_select_bars(pdev, IORESOURCE_MEM);
- if (!bars)
- return -ENODEV;
- if (pci_request_selected_regions(pdev, bars, "nvme"))
+ if (pci_request_mem_regions(pdev, "nvme"))
return -ENODEV;
dev->bar = ioremap(pci_resource_start(pdev, 0), 8192);
@@ -1912,7 +1903,7 @@ static int nvme_dev_map(struct nvme_dev *dev)
return 0;
release:
- pci_release_selected_regions(pdev, bars);
+ pci_release_mem_regions(pdev);
return -ENODEV;
}
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 56389be5d08b..67f9916ff14d 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -25,7 +25,7 @@ config PCI_MSI
If you don't know what to do here, say Y.
config PCI_MSI_IRQ_DOMAIN
- bool
+ def_bool ARM || ARM64 || X86
depends on PCI_MSI
select GENERIC_MSI_IRQ_DOMAIN
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index dd7cdbee8029..c288e5a52575 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -91,6 +91,35 @@ void pci_bus_remove_resources(struct pci_bus *bus)
}
}
+int devm_request_pci_bus_resources(struct device *dev,
+ struct list_head *resources)
+{
+ struct resource_entry *win;
+ struct resource *parent, *res;
+ int err;
+
+ resource_list_for_each_entry(win, resources) {
+ res = win->res;
+ switch (resource_type(res)) {
+ case IORESOURCE_IO:
+ parent = &ioport_resource;
+ break;
+ case IORESOURCE_MEM:
+ parent = &iomem_resource;
+ break;
+ default:
+ continue;
+ }
+
+ err = devm_request_resource(dev, parent, res);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_request_pci_bus_resources);
+
static struct pci_bus_region pci_32_bit = {0, 0xffffffffULL};
#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
static struct pci_bus_region pci_64_bit = {0,
@@ -291,6 +320,7 @@ void pci_bus_add_device(struct pci_dev *dev)
pci_fixup_device(pci_fixup_final, dev);
pci_create_sysfs_dev_files(dev);
pci_proc_attach_device(dev);
+ pci_bridge_d3_device_changed(dev);
dev->match_driver = true;
retval = device_attach(&dev->dev);
@@ -397,4 +427,3 @@ void pci_bus_put(struct pci_bus *bus)
put_device(&bus->dev);
}
EXPORT_SYMBOL(pci_bus_put);
-
diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c
index f9832ad8efe2..66e0d718472f 100644
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -19,10 +19,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/pci-ecam.h>
#include <linux/slab.h>
-#include "ecam.h"
-
/*
* On 64-bit systems, we do a single ioremap for the whole config space
* since we have enough virtual address range available. On 32-bit, we
@@ -52,6 +51,7 @@ struct pci_config_window *pci_ecam_create(struct device *dev,
if (!cfg)
return ERR_PTR(-ENOMEM);
+ cfg->parent = dev;
cfg->ops = ops;
cfg->busr.start = busr->start;
cfg->busr.end = busr->end;
@@ -95,7 +95,7 @@ struct pci_config_window *pci_ecam_create(struct device *dev,
}
if (ops->init) {
- err = ops->init(dev, cfg);
+ err = ops->init(cfg);
if (err)
goto err_exit;
}
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 5d2374e4ee7f..9b485d873b0d 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -3,8 +3,9 @@ menu "PCI host controller drivers"
config PCI_DRA7XX
bool "TI DRA7xx PCIe controller"
- select PCIE_DW
depends on OF && HAS_IOMEM && TI_PIPE3
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW
help
Enables support for the PCIe controller in the DRA7xx SoC. There
are two instances of PCIe controller in DRA7xx. This controller can
@@ -16,11 +17,20 @@ config PCI_MVEBU
depends on ARM
depends on OF
+config PCI_AARDVARK
+ bool "Aardvark PCIe controller"
+ depends on ARCH_MVEBU && ARM64
+ depends on OF
+ depends on PCI_MSI_IRQ_DOMAIN
+ help
+ Add support for Aardvark 64bit PCIe Host Controller. This
+ controller is part of the South Bridge of the Marvel Armada
+ 3700 SoC.
config PCIE_XILINX_NWL
bool "NWL PCIe Core"
depends on ARCH_ZYNQMP
- select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+ depends on PCI_MSI_IRQ_DOMAIN
help
Say 'Y' here if you want kernel support for Xilinx
NWL PCIe controller. The controller can act as Root Port
@@ -29,6 +39,7 @@ config PCIE_XILINX_NWL
config PCIE_DW_PLAT
bool "Platform bus based DesignWare PCIe Controller"
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
---help---
This selects the DesignWare PCIe controller support. Select this if
@@ -40,16 +51,19 @@ config PCIE_DW_PLAT
config PCIE_DW
bool
+ depends on PCI_MSI_IRQ_DOMAIN
config PCI_EXYNOS
bool "Samsung Exynos PCIe controller"
depends on SOC_EXYNOS5440
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
config PCI_IMX6
bool "Freescale i.MX6 PCIe controller"
depends on SOC_IMX6Q
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
@@ -72,8 +86,7 @@ config PCI_RCAR_GEN2
config PCIE_RCAR
bool "Renesas R-Car PCIe controller"
depends on ARCH_RENESAS || (ARM && COMPILE_TEST)
- select PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI_MSI_IRQ_DOMAIN
help
Say Y here if you want PCIe controller support on R-Car SoCs.
@@ -85,6 +98,7 @@ config PCI_HOST_GENERIC
bool "Generic PCI host controller"
depends on (ARM || ARM64) && OF
select PCI_HOST_COMMON
+ select IRQ_DOMAIN
help
Say Y here if you want to support a simple generic PCI host
controller, such as the one emulated by kvmtool.
@@ -92,6 +106,7 @@ config PCI_HOST_GENERIC
config PCIE_SPEAR13XX
bool "STMicroelectronics SPEAr PCIe controller"
depends on ARCH_SPEAR13XX
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
@@ -100,6 +115,7 @@ config PCIE_SPEAR13XX
config PCI_KEYSTONE
bool "TI Keystone PCIe controller"
depends on ARCH_KEYSTONE
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
@@ -120,7 +136,6 @@ config PCI_XGENE
depends on ARCH_XGENE
depends on OF
select PCIEPORTBUS
- select PCI_MSI_IRQ_DOMAIN if PCI_MSI
help
Say Y here if you want internal PCI support on APM X-Gene SoC.
There are 5 internal PCIe ports available. Each port is GEN3 capable
@@ -128,7 +143,8 @@ config PCI_XGENE
config PCI_XGENE_MSI
bool "X-Gene v1 PCIe MSI feature"
- depends on PCI_XGENE && PCI_MSI
+ depends on PCI_XGENE
+ depends on PCI_MSI_IRQ_DOMAIN
default y
help
Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
@@ -137,6 +153,7 @@ config PCI_XGENE_MSI
config PCI_LAYERSCAPE
bool "Freescale Layerscape PCIe controller"
depends on OF && (ARM || ARCH_LAYERSCAPE)
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select MFD_SYSCON
help
@@ -177,8 +194,7 @@ config PCIE_IPROC_BCMA
config PCIE_IPROC_MSI
bool "Broadcom iProc PCIe MSI support"
depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA
- depends on PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI_MSI_IRQ_DOMAIN
default ARCH_BCM_IPROC
help
Say Y here if you want to enable MSI support for Broadcom's iProc
@@ -195,8 +211,8 @@ config PCIE_ALTERA
config PCIE_ALTERA_MSI
bool "Altera PCIe MSI feature"
- depends on PCIE_ALTERA && PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCIE_ALTERA
+ depends on PCI_MSI_IRQ_DOMAIN
help
Say Y here if you want PCIe MSI support for the Altera FPGA.
This MSI driver supports Altera MSI to GIC controller IP.
@@ -204,6 +220,7 @@ config PCIE_ALTERA_MSI
config PCI_HISI
depends on OF && ARM64
bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
@@ -213,6 +230,7 @@ config PCI_HISI
config PCIE_QCOM
bool "Qualcomm PCIe controller"
depends on ARCH_QCOM && OF
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
@@ -237,6 +255,7 @@ config PCI_HOST_THUNDER_ECAM
config PCIE_ARMADA_8K
bool "Marvell Armada-8K PCIe controller"
depends on ARCH_MVEBU
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
@@ -245,4 +264,14 @@ config PCIE_ARMADA_8K
Designware hardware and therefore the driver re-uses the
Designware core functions to implement the driver.
+config PCIE_ARTPEC6
+ bool "Axis ARTPEC-6 PCIe controller"
+ depends on MACH_ARTPEC6
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW
+ select PCIEPORTBUS
+ help
+ Say Y here to enable PCIe controller support on Axis ARTPEC-6
+ SoCs. This PCIe controller uses the DesignWare core.
+
endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 9c8698e89e96..88434101e4c4 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
+obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
@@ -29,3 +30,4 @@ obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
+obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
new file mode 100644
index 000000000000..ef9893fa3176
--- /dev/null
+++ b/drivers/pci/host/pci-aardvark.c
@@ -0,0 +1,1001 @@
+/*
+ * Driver for the Aardvark PCIe controller, used on Marvell Armada
+ * 3700.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Author: Hezi Shahmoon <hezi.shahmoon@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+
+/* PCIe core registers */
+#define PCIE_CORE_CMD_STATUS_REG 0x4
+#define PCIE_CORE_CMD_IO_ACCESS_EN BIT(0)
+#define PCIE_CORE_CMD_MEM_ACCESS_EN BIT(1)
+#define PCIE_CORE_CMD_MEM_IO_REQ_EN BIT(2)
+#define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8
+#define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4)
+#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5
+#define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11)
+#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12
+#define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
+#define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
+#define PCIE_CORE_LINK_TRAINING BIT(5)
+#define PCIE_CORE_LINK_WIDTH_SHIFT 20
+#define PCIE_CORE_ERR_CAPCTL_REG 0x118
+#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
+#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN BIT(6)
+#define PCIE_CORE_ERR_CAPCTL_ECRC_CHCK BIT(7)
+#define PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV BIT(8)
+
+/* PIO registers base address and register offsets */
+#define PIO_BASE_ADDR 0x4000
+#define PIO_CTRL (PIO_BASE_ADDR + 0x0)
+#define PIO_CTRL_TYPE_MASK GENMASK(3, 0)
+#define PIO_CTRL_ADDR_WIN_DISABLE BIT(24)
+#define PIO_STAT (PIO_BASE_ADDR + 0x4)
+#define PIO_COMPLETION_STATUS_SHIFT 7
+#define PIO_COMPLETION_STATUS_MASK GENMASK(9, 7)
+#define PIO_COMPLETION_STATUS_OK 0
+#define PIO_COMPLETION_STATUS_UR 1
+#define PIO_COMPLETION_STATUS_CRS 2
+#define PIO_COMPLETION_STATUS_CA 4
+#define PIO_NON_POSTED_REQ BIT(0)
+#define PIO_ADDR_LS (PIO_BASE_ADDR + 0x8)
+#define PIO_ADDR_MS (PIO_BASE_ADDR + 0xc)
+#define PIO_WR_DATA (PIO_BASE_ADDR + 0x10)
+#define PIO_WR_DATA_STRB (PIO_BASE_ADDR + 0x14)
+#define PIO_RD_DATA (PIO_BASE_ADDR + 0x18)
+#define PIO_START (PIO_BASE_ADDR + 0x1c)
+#define PIO_ISR (PIO_BASE_ADDR + 0x20)
+#define PIO_ISRM (PIO_BASE_ADDR + 0x24)
+
+/* Aardvark Control registers */
+#define CONTROL_BASE_ADDR 0x4800
+#define PCIE_CORE_CTRL0_REG (CONTROL_BASE_ADDR + 0x0)
+#define PCIE_GEN_SEL_MSK 0x3
+#define PCIE_GEN_SEL_SHIFT 0x0
+#define SPEED_GEN_1 0
+#define SPEED_GEN_2 1
+#define SPEED_GEN_3 2
+#define IS_RC_MSK 1
+#define IS_RC_SHIFT 2
+#define LANE_CNT_MSK 0x18
+#define LANE_CNT_SHIFT 0x3
+#define LANE_COUNT_1 (0 << LANE_CNT_SHIFT)
+#define LANE_COUNT_2 (1 << LANE_CNT_SHIFT)
+#define LANE_COUNT_4 (2 << LANE_CNT_SHIFT)
+#define LANE_COUNT_8 (3 << LANE_CNT_SHIFT)
+#define LINK_TRAINING_EN BIT(6)
+#define LEGACY_INTA BIT(28)
+#define LEGACY_INTB BIT(29)
+#define LEGACY_INTC BIT(30)
+#define LEGACY_INTD BIT(31)
+#define PCIE_CORE_CTRL1_REG (CONTROL_BASE_ADDR + 0x4)
+#define HOT_RESET_GEN BIT(0)
+#define PCIE_CORE_CTRL2_REG (CONTROL_BASE_ADDR + 0x8)
+#define PCIE_CORE_CTRL2_RESERVED 0x7
+#define PCIE_CORE_CTRL2_TD_ENABLE BIT(4)
+#define PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE BIT(5)
+#define PCIE_CORE_CTRL2_OB_WIN_ENABLE BIT(6)
+#define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10)
+#define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40)
+#define PCIE_ISR0_MASK_REG (CONTROL_BASE_ADDR + 0x44)
+#define PCIE_ISR0_MSI_INT_PENDING BIT(24)
+#define PCIE_ISR0_INTX_ASSERT(val) BIT(16 + (val))
+#define PCIE_ISR0_INTX_DEASSERT(val) BIT(20 + (val))
+#define PCIE_ISR0_ALL_MASK GENMASK(26, 0)
+#define PCIE_ISR1_REG (CONTROL_BASE_ADDR + 0x48)
+#define PCIE_ISR1_MASK_REG (CONTROL_BASE_ADDR + 0x4C)
+#define PCIE_ISR1_POWER_STATE_CHANGE BIT(4)
+#define PCIE_ISR1_FLUSH BIT(5)
+#define PCIE_ISR1_ALL_MASK GENMASK(5, 4)
+#define PCIE_MSI_ADDR_LOW_REG (CONTROL_BASE_ADDR + 0x50)
+#define PCIE_MSI_ADDR_HIGH_REG (CONTROL_BASE_ADDR + 0x54)
+#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
+#define PCIE_MSI_MASK_REG (CONTROL_BASE_ADDR + 0x5C)
+#define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C)
+
+/* PCIe window configuration */
+#define OB_WIN_BASE_ADDR 0x4c00
+#define OB_WIN_BLOCK_SIZE 0x20
+#define OB_WIN_REG_ADDR(win, offset) (OB_WIN_BASE_ADDR + \
+ OB_WIN_BLOCK_SIZE * (win) + \
+ (offset))
+#define OB_WIN_MATCH_LS(win) OB_WIN_REG_ADDR(win, 0x00)
+#define OB_WIN_MATCH_MS(win) OB_WIN_REG_ADDR(win, 0x04)
+#define OB_WIN_REMAP_LS(win) OB_WIN_REG_ADDR(win, 0x08)
+#define OB_WIN_REMAP_MS(win) OB_WIN_REG_ADDR(win, 0x0c)
+#define OB_WIN_MASK_LS(win) OB_WIN_REG_ADDR(win, 0x10)
+#define OB_WIN_MASK_MS(win) OB_WIN_REG_ADDR(win, 0x14)
+#define OB_WIN_ACTIONS(win) OB_WIN_REG_ADDR(win, 0x18)
+
+/* PCIe window types */
+#define OB_PCIE_MEM 0x0
+#define OB_PCIE_IO 0x4
+
+/* LMI registers base address and register offsets */
+#define LMI_BASE_ADDR 0x6000
+#define CFG_REG (LMI_BASE_ADDR + 0x0)
+#define LTSSM_SHIFT 24
+#define LTSSM_MASK 0x3f
+#define LTSSM_L0 0x10
+#define RC_BAR_CONFIG 0x300
+
+/* PCIe core controller registers */
+#define CTRL_CORE_BASE_ADDR 0x18000
+#define CTRL_CONFIG_REG (CTRL_CORE_BASE_ADDR + 0x0)
+#define CTRL_MODE_SHIFT 0x0
+#define CTRL_MODE_MASK 0x1
+#define PCIE_CORE_MODE_DIRECT 0x0
+#define PCIE_CORE_MODE_COMMAND 0x1
+
+/* PCIe Central Interrupts Registers */
+#define CENTRAL_INT_BASE_ADDR 0x1b000
+#define HOST_CTRL_INT_STATUS_REG (CENTRAL_INT_BASE_ADDR + 0x0)
+#define HOST_CTRL_INT_MASK_REG (CENTRAL_INT_BASE_ADDR + 0x4)
+#define PCIE_IRQ_CMDQ_INT BIT(0)
+#define PCIE_IRQ_MSI_STATUS_INT BIT(1)
+#define PCIE_IRQ_CMD_SENT_DONE BIT(3)
+#define PCIE_IRQ_DMA_INT BIT(4)
+#define PCIE_IRQ_IB_DXFERDONE BIT(5)
+#define PCIE_IRQ_OB_DXFERDONE BIT(6)
+#define PCIE_IRQ_OB_RXFERDONE BIT(7)
+#define PCIE_IRQ_COMPQ_INT BIT(12)
+#define PCIE_IRQ_DIR_RD_DDR_DET BIT(13)
+#define PCIE_IRQ_DIR_WR_DDR_DET BIT(14)
+#define PCIE_IRQ_CORE_INT BIT(16)
+#define PCIE_IRQ_CORE_INT_PIO BIT(17)
+#define PCIE_IRQ_DPMU_INT BIT(18)
+#define PCIE_IRQ_PCIE_MIS_INT BIT(19)
+#define PCIE_IRQ_MSI_INT1_DET BIT(20)
+#define PCIE_IRQ_MSI_INT2_DET BIT(21)
+#define PCIE_IRQ_RC_DBELL_DET BIT(22)
+#define PCIE_IRQ_EP_STATUS BIT(23)
+#define PCIE_IRQ_ALL_MASK 0xfff0fb
+#define PCIE_IRQ_ENABLE_INTS_MASK PCIE_IRQ_CORE_INT
+
+/* Transaction types */
+#define PCIE_CONFIG_RD_TYPE0 0x8
+#define PCIE_CONFIG_RD_TYPE1 0x9
+#define PCIE_CONFIG_WR_TYPE0 0xa
+#define PCIE_CONFIG_WR_TYPE1 0xb
+
+/* PCI_BDF shifts 8bit, so we need extra 4bit shift */
+#define PCIE_BDF(dev) (dev << 4)
+#define PCIE_CONF_BUS(bus) (((bus) & 0xff) << 20)
+#define PCIE_CONF_DEV(dev) (((dev) & 0x1f) << 15)
+#define PCIE_CONF_FUNC(fun) (((fun) & 0x7) << 12)
+#define PCIE_CONF_REG(reg) ((reg) & 0xffc)
+#define PCIE_CONF_ADDR(bus, devfn, where) \
+ (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where))
+
+#define PIO_TIMEOUT_MS 1
+
+#define LINK_WAIT_MAX_RETRIES 10
+#define LINK_WAIT_USLEEP_MIN 90000
+#define LINK_WAIT_USLEEP_MAX 100000
+
+#define LEGACY_IRQ_NUM 4
+#define MSI_IRQ_NUM 32
+
+struct advk_pcie {
+ struct platform_device *pdev;
+ void __iomem *base;
+ struct list_head resources;
+ struct irq_domain *irq_domain;
+ struct irq_chip irq_chip;
+ struct msi_controller msi;
+ struct irq_domain *msi_domain;
+ struct irq_chip msi_irq_chip;
+ DECLARE_BITMAP(msi_irq_in_use, MSI_IRQ_NUM);
+ struct mutex msi_used_lock;
+ u16 msi_msg;
+ int root_bus_nr;
+};
+
+static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
+{
+ writel(val, pcie->base + reg);
+}
+
+static inline u32 advk_readl(struct advk_pcie *pcie, u64 reg)
+{
+ return readl(pcie->base + reg);
+}
+
+static int advk_pcie_link_up(struct advk_pcie *pcie)
+{
+ u32 val, ltssm_state;
+
+ val = advk_readl(pcie, CFG_REG);
+ ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK;
+ return ltssm_state >= LTSSM_L0;
+}
+
+static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
+{
+ int retries;
+
+ /* check if the link is up or not */
+ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ if (advk_pcie_link_up(pcie)) {
+ dev_info(&pcie->pdev->dev, "link up\n");
+ return 0;
+ }
+
+ usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ }
+
+ dev_err(&pcie->pdev->dev, "link never came up\n");
+
+ return -ETIMEDOUT;
+}
+
+/*
+ * Set PCIe address window register which could be used for memory
+ * mapping.
+ */
+static void advk_pcie_set_ob_win(struct advk_pcie *pcie,
+ u32 win_num, u32 match_ms,
+ u32 match_ls, u32 mask_ms,
+ u32 mask_ls, u32 remap_ms,
+ u32 remap_ls, u32 action)
+{
+ advk_writel(pcie, match_ls, OB_WIN_MATCH_LS(win_num));
+ advk_writel(pcie, match_ms, OB_WIN_MATCH_MS(win_num));
+ advk_writel(pcie, mask_ms, OB_WIN_MASK_MS(win_num));
+ advk_writel(pcie, mask_ls, OB_WIN_MASK_LS(win_num));
+ advk_writel(pcie, remap_ms, OB_WIN_REMAP_MS(win_num));
+ advk_writel(pcie, remap_ls, OB_WIN_REMAP_LS(win_num));
+ advk_writel(pcie, action, OB_WIN_ACTIONS(win_num));
+ advk_writel(pcie, match_ls | BIT(0), OB_WIN_MATCH_LS(win_num));
+}
+
+static void advk_pcie_setup_hw(struct advk_pcie *pcie)
+{
+ u32 reg;
+ int i;
+
+ /* Point PCIe unit MBUS decode windows to DRAM space */
+ for (i = 0; i < 8; i++)
+ advk_pcie_set_ob_win(pcie, i, 0, 0, 0, 0, 0, 0, 0);
+
+ /* Set to Direct mode */
+ reg = advk_readl(pcie, CTRL_CONFIG_REG);
+ reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
+ reg |= ((PCIE_CORE_MODE_DIRECT & CTRL_MODE_MASK) << CTRL_MODE_SHIFT);
+ advk_writel(pcie, reg, CTRL_CONFIG_REG);
+
+ /* Set PCI global control register to RC mode */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg |= (IS_RC_MSK << IS_RC_SHIFT);
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* Set Advanced Error Capabilities and Control PF0 register */
+ reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
+ PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
+ PCIE_CORE_ERR_CAPCTL_ECRC_CHCK |
+ PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV;
+ advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
+
+ /* Set PCIe Device Control and Status 1 PF0 register */
+ reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
+ (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
+ PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
+ PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT;
+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
+
+ /* Program PCIe Control 2 to disable strict ordering */
+ reg = PCIE_CORE_CTRL2_RESERVED |
+ PCIE_CORE_CTRL2_TD_ENABLE;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+
+ /* Set GEN2 */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~PCIE_GEN_SEL_MSK;
+ reg |= SPEED_GEN_2;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* Set lane X1 */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~LANE_CNT_MSK;
+ reg |= LANE_COUNT_1;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* Enable link training */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg |= LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* Enable MSI */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
+ reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+
+ /* Clear all interrupts */
+ advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_REG);
+ advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG);
+ advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
+
+ /* Disable All ISR0/1 Sources */
+ reg = PCIE_ISR0_ALL_MASK;
+ reg &= ~PCIE_ISR0_MSI_INT_PENDING;
+ advk_writel(pcie, reg, PCIE_ISR0_MASK_REG);
+
+ advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
+
+ /* Unmask all MSI's */
+ advk_writel(pcie, 0, PCIE_MSI_MASK_REG);
+
+ /* Enable summary interrupt for GIC SPI source */
+ reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
+ advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
+
+ reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
+ reg |= PCIE_CORE_CTRL2_OB_WIN_ENABLE;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+
+ /* Bypass the address window mapping for PIO */
+ reg = advk_readl(pcie, PIO_CTRL);
+ reg |= PIO_CTRL_ADDR_WIN_DISABLE;
+ advk_writel(pcie, reg, PIO_CTRL);
+
+ /* Start link training */
+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
+ reg |= PCIE_CORE_LINK_TRAINING;
+ advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+
+ advk_pcie_wait_for_link(pcie);
+
+ reg = PCIE_CORE_LINK_L0S_ENTRY |
+ (1 << PCIE_CORE_LINK_WIDTH_SHIFT);
+ advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+
+ reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+ reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
+ PCIE_CORE_CMD_IO_ACCESS_EN |
+ PCIE_CORE_CMD_MEM_IO_REQ_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
+}
+
+static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
+{
+ u32 reg;
+ unsigned int status;
+ char *strcomp_status, *str_posted;
+
+ reg = advk_readl(pcie, PIO_STAT);
+ status = (reg & PIO_COMPLETION_STATUS_MASK) >>
+ PIO_COMPLETION_STATUS_SHIFT;
+
+ if (!status)
+ return;
+
+ switch (status) {
+ case PIO_COMPLETION_STATUS_UR:
+ strcomp_status = "UR";
+ break;
+ case PIO_COMPLETION_STATUS_CRS:
+ strcomp_status = "CRS";
+ break;
+ case PIO_COMPLETION_STATUS_CA:
+ strcomp_status = "CA";
+ break;
+ default:
+ strcomp_status = "Unknown";
+ break;
+ }
+
+ if (reg & PIO_NON_POSTED_REQ)
+ str_posted = "Non-posted";
+ else
+ str_posted = "Posted";
+
+ dev_err(&pcie->pdev->dev, "%s PIO Response Status: %s, %#x @ %#x\n",
+ str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
+}
+
+static int advk_pcie_wait_pio(struct advk_pcie *pcie)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(PIO_TIMEOUT_MS);
+
+ while (time_before(jiffies, timeout)) {
+ u32 start, isr;
+
+ start = advk_readl(pcie, PIO_START);
+ isr = advk_readl(pcie, PIO_ISR);
+ if (!start && isr)
+ return 0;
+ }
+
+ dev_err(&pcie->pdev->dev, "config read/write timed out\n");
+ return -ETIMEDOUT;
+}
+
+static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 *val)
+{
+ struct advk_pcie *pcie = bus->sysdata;
+ u32 reg;
+ int ret;
+
+ if (PCI_SLOT(devfn) != 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /* Start PIO */
+ advk_writel(pcie, 0, PIO_START);
+ advk_writel(pcie, 1, PIO_ISR);
+
+ /* Program the control register */
+ reg = advk_readl(pcie, PIO_CTRL);
+ reg &= ~PIO_CTRL_TYPE_MASK;
+ if (bus->number == pcie->root_bus_nr)
+ reg |= PCIE_CONFIG_RD_TYPE0;
+ else
+ reg |= PCIE_CONFIG_RD_TYPE1;
+ advk_writel(pcie, reg, PIO_CTRL);
+
+ /* Program the address registers */
+ reg = PCIE_BDF(devfn) | PCIE_CONF_REG(where);
+ advk_writel(pcie, reg, PIO_ADDR_LS);
+ advk_writel(pcie, 0, PIO_ADDR_MS);
+
+ /* Program the data strobe */
+ advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
+
+ /* Start the transfer */
+ advk_writel(pcie, 1, PIO_START);
+
+ ret = advk_pcie_wait_pio(pcie);
+ if (ret < 0)
+ return PCIBIOS_SET_FAILED;
+
+ advk_pcie_check_pio_status(pcie);
+
+ /* Get the read result */
+ *val = advk_readl(pcie, PIO_RD_DATA);
+ if (size == 1)
+ *val = (*val >> (8 * (where & 3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8 * (where & 3))) & 0xffff;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ struct advk_pcie *pcie = bus->sysdata;
+ u32 reg;
+ u32 data_strobe = 0x0;
+ int offset;
+ int ret;
+
+ if (PCI_SLOT(devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (where % size)
+ return PCIBIOS_SET_FAILED;
+
+ /* Start PIO */
+ advk_writel(pcie, 0, PIO_START);
+ advk_writel(pcie, 1, PIO_ISR);
+
+ /* Program the control register */
+ reg = advk_readl(pcie, PIO_CTRL);
+ reg &= ~PIO_CTRL_TYPE_MASK;
+ if (bus->number == pcie->root_bus_nr)
+ reg |= PCIE_CONFIG_WR_TYPE0;
+ else
+ reg |= PCIE_CONFIG_WR_TYPE1;
+ advk_writel(pcie, reg, PIO_CTRL);
+
+ /* Program the address registers */
+ reg = PCIE_CONF_ADDR(bus->number, devfn, where);
+ advk_writel(pcie, reg, PIO_ADDR_LS);
+ advk_writel(pcie, 0, PIO_ADDR_MS);
+
+ /* Calculate the write strobe */
+ offset = where & 0x3;
+ reg = val << (8 * offset);
+ data_strobe = GENMASK(size - 1, 0) << offset;
+
+ /* Program the data register */
+ advk_writel(pcie, reg, PIO_WR_DATA);
+
+ /* Program the data strobe */
+ advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
+
+ /* Start the transfer */
+ advk_writel(pcie, 1, PIO_START);
+
+ ret = advk_pcie_wait_pio(pcie);
+ if (ret < 0)
+ return PCIBIOS_SET_FAILED;
+
+ advk_pcie_check_pio_status(pcie);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops advk_pcie_ops = {
+ .read = advk_pcie_rd_conf,
+ .write = advk_pcie_wr_conf,
+};
+
+static int advk_pcie_alloc_msi(struct advk_pcie *pcie)
+{
+ int hwirq;
+
+ mutex_lock(&pcie->msi_used_lock);
+ hwirq = find_first_zero_bit(pcie->msi_irq_in_use, MSI_IRQ_NUM);
+ if (hwirq >= MSI_IRQ_NUM)
+ hwirq = -ENOSPC;
+ else
+ set_bit(hwirq, pcie->msi_irq_in_use);
+ mutex_unlock(&pcie->msi_used_lock);
+
+ return hwirq;
+}
+
+static void advk_pcie_free_msi(struct advk_pcie *pcie, int hwirq)
+{
+ mutex_lock(&pcie->msi_used_lock);
+ if (!test_bit(hwirq, pcie->msi_irq_in_use))
+ dev_err(&pcie->pdev->dev, "trying to free unused MSI#%d\n",
+ hwirq);
+ else
+ clear_bit(hwirq, pcie->msi_irq_in_use);
+ mutex_unlock(&pcie->msi_used_lock);
+}
+
+static int advk_pcie_setup_msi_irq(struct msi_controller *chip,
+ struct pci_dev *pdev,
+ struct msi_desc *desc)
+{
+ struct advk_pcie *pcie = pdev->bus->sysdata;
+ struct msi_msg msg;
+ int virq, hwirq;
+ phys_addr_t msi_msg_phys;
+
+ /* We support MSI, but not MSI-X */
+ if (desc->msi_attrib.is_msix)
+ return -EINVAL;
+
+ hwirq = advk_pcie_alloc_msi(pcie);
+ if (hwirq < 0)
+ return hwirq;
+
+ virq = irq_create_mapping(pcie->msi_domain, hwirq);
+ if (!virq) {
+ advk_pcie_free_msi(pcie, hwirq);
+ return -EINVAL;
+ }
+
+ irq_set_msi_desc(virq, desc);
+
+ msi_msg_phys = virt_to_phys(&pcie->msi_msg);
+
+ msg.address_lo = lower_32_bits(msi_msg_phys);
+ msg.address_hi = upper_32_bits(msi_msg_phys);
+ msg.data = virq;
+
+ pci_write_msi_msg(virq, &msg);
+
+ return 0;
+}
+
+static void advk_pcie_teardown_msi_irq(struct msi_controller *chip,
+ unsigned int irq)
+{
+ struct irq_data *d = irq_get_irq_data(irq);
+ struct msi_desc *msi = irq_data_get_msi_desc(d);
+ struct advk_pcie *pcie = msi_desc_to_pci_sysdata(msi);
+ unsigned long hwirq = d->hwirq;
+
+ irq_dispose_mapping(irq);
+ advk_pcie_free_msi(pcie, hwirq);
+}
+
+static int advk_pcie_msi_map(struct irq_domain *domain,
+ unsigned int virq, irq_hw_number_t hw)
+{
+ struct advk_pcie *pcie = domain->host_data;
+
+ irq_set_chip_and_handler(virq, &pcie->msi_irq_chip,
+ handle_simple_irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops advk_pcie_msi_irq_ops = {
+ .map = advk_pcie_msi_map,
+};
+
+static void advk_pcie_irq_mask(struct irq_data *d)
+{
+ struct advk_pcie *pcie = d->domain->host_data;
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ u32 mask;
+
+ mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+ mask |= PCIE_ISR0_INTX_ASSERT(hwirq);
+ advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
+}
+
+static void advk_pcie_irq_unmask(struct irq_data *d)
+{
+ struct advk_pcie *pcie = d->domain->host_data;
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ u32 mask;
+
+ mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+ mask &= ~PCIE_ISR0_INTX_ASSERT(hwirq);
+ advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
+}
+
+static int advk_pcie_irq_map(struct irq_domain *h,
+ unsigned int virq, irq_hw_number_t hwirq)
+{
+ struct advk_pcie *pcie = h->host_data;
+
+ advk_pcie_irq_mask(irq_get_irq_data(virq));
+ irq_set_status_flags(virq, IRQ_LEVEL);
+ irq_set_chip_and_handler(virq, &pcie->irq_chip,
+ handle_level_irq);
+ irq_set_chip_data(virq, pcie);
+
+ return 0;
+}
+
+static const struct irq_domain_ops advk_pcie_irq_domain_ops = {
+ .map = advk_pcie_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
+{
+ struct device *dev = &pcie->pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct irq_chip *msi_irq_chip;
+ struct msi_controller *msi;
+ phys_addr_t msi_msg_phys;
+ int ret;
+
+ msi_irq_chip = &pcie->msi_irq_chip;
+
+ msi_irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-msi",
+ dev_name(dev));
+ if (!msi_irq_chip->name)
+ return -ENOMEM;
+
+ msi_irq_chip->irq_enable = pci_msi_unmask_irq;
+ msi_irq_chip->irq_disable = pci_msi_mask_irq;
+ msi_irq_chip->irq_mask = pci_msi_mask_irq;
+ msi_irq_chip->irq_unmask = pci_msi_unmask_irq;
+
+ msi = &pcie->msi;
+
+ msi->setup_irq = advk_pcie_setup_msi_irq;
+ msi->teardown_irq = advk_pcie_teardown_msi_irq;
+ msi->of_node = node;
+
+ mutex_init(&pcie->msi_used_lock);
+
+ msi_msg_phys = virt_to_phys(&pcie->msi_msg);
+
+ advk_writel(pcie, lower_32_bits(msi_msg_phys),
+ PCIE_MSI_ADDR_LOW_REG);
+ advk_writel(pcie, upper_32_bits(msi_msg_phys),
+ PCIE_MSI_ADDR_HIGH_REG);
+
+ pcie->msi_domain =
+ irq_domain_add_linear(NULL, MSI_IRQ_NUM,
+ &advk_pcie_msi_irq_ops, pcie);
+ if (!pcie->msi_domain)
+ return -ENOMEM;
+
+ ret = of_pci_msi_chip_add(msi);
+ if (ret < 0) {
+ irq_domain_remove(pcie->msi_domain);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void advk_pcie_remove_msi_irq_domain(struct advk_pcie *pcie)
+{
+ of_pci_msi_chip_remove(&pcie->msi);
+ irq_domain_remove(pcie->msi_domain);
+}
+
+static int advk_pcie_init_irq_domain(struct advk_pcie *pcie)
+{
+ struct device *dev = &pcie->pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *pcie_intc_node;
+ struct irq_chip *irq_chip;
+
+ pcie_intc_node = of_get_next_child(node, NULL);
+ if (!pcie_intc_node) {
+ dev_err(dev, "No PCIe Intc node found\n");
+ return -ENODEV;
+ }
+
+ irq_chip = &pcie->irq_chip;
+
+ irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-irq",
+ dev_name(dev));
+ if (!irq_chip->name) {
+ of_node_put(pcie_intc_node);
+ return -ENOMEM;
+ }
+
+ irq_chip->irq_mask = advk_pcie_irq_mask;
+ irq_chip->irq_mask_ack = advk_pcie_irq_mask;
+ irq_chip->irq_unmask = advk_pcie_irq_unmask;
+
+ pcie->irq_domain =
+ irq_domain_add_linear(pcie_intc_node, LEGACY_IRQ_NUM,
+ &advk_pcie_irq_domain_ops, pcie);
+ if (!pcie->irq_domain) {
+ dev_err(dev, "Failed to get a INTx IRQ domain\n");
+ of_node_put(pcie_intc_node);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void advk_pcie_remove_irq_domain(struct advk_pcie *pcie)
+{
+ irq_domain_remove(pcie->irq_domain);
+}
+
+static void advk_pcie_handle_msi(struct advk_pcie *pcie)
+{
+ u32 msi_val, msi_mask, msi_status, msi_idx;
+ u16 msi_data;
+
+ msi_mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
+ msi_val = advk_readl(pcie, PCIE_MSI_STATUS_REG);
+ msi_status = msi_val & ~msi_mask;
+
+ for (msi_idx = 0; msi_idx < MSI_IRQ_NUM; msi_idx++) {
+ if (!(BIT(msi_idx) & msi_status))
+ continue;
+
+ advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG);
+ msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & 0xFF;
+ generic_handle_irq(msi_data);
+ }
+
+ advk_writel(pcie, PCIE_ISR0_MSI_INT_PENDING,
+ PCIE_ISR0_REG);
+}
+
+static void advk_pcie_handle_int(struct advk_pcie *pcie)
+{
+ u32 val, mask, status;
+ int i, virq;
+
+ val = advk_readl(pcie, PCIE_ISR0_REG);
+ mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+ status = val & ((~mask) & PCIE_ISR0_ALL_MASK);
+
+ if (!status) {
+ advk_writel(pcie, val, PCIE_ISR0_REG);
+ return;
+ }
+
+ /* Process MSI interrupts */
+ if (status & PCIE_ISR0_MSI_INT_PENDING)
+ advk_pcie_handle_msi(pcie);
+
+ /* Process legacy interrupts */
+ for (i = 0; i < LEGACY_IRQ_NUM; i++) {
+ if (!(status & PCIE_ISR0_INTX_ASSERT(i)))
+ continue;
+
+ advk_writel(pcie, PCIE_ISR0_INTX_ASSERT(i),
+ PCIE_ISR0_REG);
+
+ virq = irq_find_mapping(pcie->irq_domain, i);
+ generic_handle_irq(virq);
+ }
+}
+
+static irqreturn_t advk_pcie_irq_handler(int irq, void *arg)
+{
+ struct advk_pcie *pcie = arg;
+ u32 status;
+
+ status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
+ if (!(status & PCIE_IRQ_CORE_INT))
+ return IRQ_NONE;
+
+ advk_pcie_handle_int(pcie);
+
+ /* Clear interrupt */
+ advk_writel(pcie, PCIE_IRQ_CORE_INT, HOST_CTRL_INT_STATUS_REG);
+
+ return IRQ_HANDLED;
+}
+
+static int advk_pcie_parse_request_of_pci_ranges(struct advk_pcie *pcie)
+{
+ int err, res_valid = 0;
+ struct device *dev = &pcie->pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct resource_entry *win;
+ resource_size_t iobase;
+
+ INIT_LIST_HEAD(&pcie->resources);
+
+ err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pcie->resources,
+ &iobase);
+ if (err)
+ return err;
+
+ err = devm_request_pci_bus_resources(dev, &pcie->resources);
+ if (err)
+ goto out_release_res;
+
+ resource_list_for_each_entry(win, &pcie->resources) {
+ struct resource *res = win->res;
+
+ switch (resource_type(res)) {
+ case IORESOURCE_IO:
+ advk_pcie_set_ob_win(pcie, 1,
+ upper_32_bits(res->start),
+ lower_32_bits(res->start),
+ 0, 0xF8000000, 0,
+ lower_32_bits(res->start),
+ OB_PCIE_IO);
+ err = pci_remap_iospace(res, iobase);
+ if (err)
+ dev_warn(dev, "error %d: failed to map resource %pR\n",
+ err, res);
+ break;
+ case IORESOURCE_MEM:
+ advk_pcie_set_ob_win(pcie, 0,
+ upper_32_bits(res->start),
+ lower_32_bits(res->start),
+ 0x0, 0xF8000000, 0,
+ lower_32_bits(res->start),
+ (2 << 20) | OB_PCIE_MEM);
+ res_valid |= !(res->flags & IORESOURCE_PREFETCH);
+ break;
+ case IORESOURCE_BUS:
+ pcie->root_bus_nr = res->start;
+ break;
+ }
+ }
+
+ if (!res_valid) {
+ dev_err(dev, "non-prefetchable memory resource required\n");
+ err = -EINVAL;
+ goto out_release_res;
+ }
+
+ return 0;
+
+out_release_res:
+ pci_free_resource_list(&pcie->resources);
+ return err;
+}
+
+static int advk_pcie_probe(struct platform_device *pdev)
+{
+ struct advk_pcie *pcie;
+ struct resource *res;
+ struct pci_bus *bus, *child;
+ struct msi_controller *msi;
+ struct device_node *msi_node;
+ int ret, irq;
+
+ pcie = devm_kzalloc(&pdev->dev, sizeof(struct advk_pcie),
+ GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ pcie->pdev = pdev;
+ platform_set_drvdata(pdev, pcie);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pcie->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pcie->base)) {
+ dev_err(&pdev->dev, "Failed to map registers\n");
+ return PTR_ERR(pcie->base);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ ret = devm_request_irq(&pdev->dev, irq, advk_pcie_irq_handler,
+ IRQF_SHARED | IRQF_NO_THREAD, "advk-pcie",
+ pcie);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register interrupt\n");
+ return ret;
+ }
+
+ ret = advk_pcie_parse_request_of_pci_ranges(pcie);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to parse resources\n");
+ return ret;
+ }
+
+ advk_pcie_setup_hw(pcie);
+
+ ret = advk_pcie_init_irq_domain(pcie);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialize irq\n");
+ return ret;
+ }
+
+ ret = advk_pcie_init_msi_irq_domain(pcie);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialize irq\n");
+ advk_pcie_remove_irq_domain(pcie);
+ return ret;
+ }
+
+ msi_node = of_parse_phandle(pdev->dev.of_node, "msi-parent", 0);
+ if (msi_node)
+ msi = of_pci_find_msi_chip_by_node(msi_node);
+ else
+ msi = NULL;
+
+ bus = pci_scan_root_bus_msi(&pdev->dev, 0, &advk_pcie_ops,
+ pcie, &pcie->resources, &pcie->msi);
+ if (!bus) {
+ advk_pcie_remove_msi_irq_domain(pcie);
+ advk_pcie_remove_irq_domain(pcie);
+ return -ENOMEM;
+ }
+
+ pci_bus_assign_resources(bus);
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+
+ pci_bus_add_devices(bus);
+
+ return 0;
+}
+
+static const struct of_device_id advk_pcie_of_match_table[] = {
+ { .compatible = "marvell,armada-3700-pcie", },
+ {},
+};
+
+static struct platform_driver advk_pcie_driver = {
+ .driver = {
+ .name = "advk-pcie",
+ .of_match_table = advk_pcie_of_match_table,
+ /* Driver unloading/unbinding currently not supported */
+ .suppress_bind_attrs = true,
+ },
+ .probe = advk_pcie_probe,
+};
+builtin_platform_driver(advk_pcie_driver);
diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index f441130407e7..81b3949a26db 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -181,14 +181,14 @@ static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
if (!pcie_intc_node) {
dev_err(dev, "No PCIe Intc node found\n");
- return PTR_ERR(pcie_intc_node);
+ return -ENODEV;
}
pp->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
&intx_domain_ops, pp);
if (!pp->irq_domain) {
dev_err(dev, "Failed to get a INTx IRQ domain\n");
- return PTR_ERR(pp->irq_domain);
+ return -ENODEV;
}
return 0;
diff --git a/drivers/pci/host/pci-host-common.c b/drivers/pci/host/pci-host-common.c
index 8cba7ab73df9..9d9d34e959b6 100644
--- a/drivers/pci/host/pci-host-common.c
+++ b/drivers/pci/host/pci-host-common.c
@@ -20,10 +20,9 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../ecam.h"
-
static int gen_pci_parse_request_of_pci_ranges(struct device *dev,
struct list_head *resources, struct resource **bus_range)
{
@@ -36,44 +35,34 @@ static int gen_pci_parse_request_of_pci_ranges(struct device *dev,
if (err)
return err;
+ err = devm_request_pci_bus_resources(dev, resources);
+ if (err)
+ return err;
+
resource_list_for_each_entry(win, resources) {
- struct resource *parent, *res = win->res;
+ struct resource *res = win->res;
switch (resource_type(res)) {
case IORESOURCE_IO:
- parent = &ioport_resource;
err = pci_remap_iospace(res, iobase);
- if (err) {
+ if (err)
dev_warn(dev, "error %d: failed to map resource %pR\n",
err, res);
- continue;
- }
break;
case IORESOURCE_MEM:
- parent = &iomem_resource;
res_valid |= !(res->flags & IORESOURCE_PREFETCH);
break;
case IORESOURCE_BUS:
*bus_range = res;
- default:
- continue;
+ break;
}
-
- err = devm_request_resource(dev, parent, res);
- if (err)
- goto out_release_res;
- }
-
- if (!res_valid) {
- dev_err(dev, "non-prefetchable memory resource required\n");
- err = -EINVAL;
- goto out_release_res;
}
- return 0;
+ if (res_valid)
+ return 0;
-out_release_res:
- return err;
+ dev_err(dev, "non-prefetchable memory resource required\n");
+ return -EINVAL;
}
static void gen_pci_unmap_cfg(void *ptr)
@@ -155,7 +144,14 @@ int pci_host_common_probe(struct platform_device *pdev,
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
- if (!pci_has_flag(PCI_PROBE_ONLY)) {
+ /*
+ * We insert PCI resources into the iomem_resource and
+ * ioport_resource trees in either pci_bus_claim_resources()
+ * or pci_bus_assign_resources().
+ */
+ if (pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_claim_resources(bus);
+ } else {
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
index 6eaceab1bf04..c05ea9d72f69 100644
--- a/drivers/pci/host/pci-host-generic.c
+++ b/drivers/pci/host/pci-host-generic.c
@@ -20,13 +20,12 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../ecam.h"
-
static struct pci_ecam_ops gen_pci_cfg_cam_bus_ops = {
.bus_shift = 16,
.pci_ops = {
@@ -46,8 +45,6 @@ static const struct of_device_id gen_pci_of_match[] = {
{ },
};
-MODULE_DEVICE_TABLE(of, gen_pci_of_match);
-
static int gen_pci_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id;
@@ -66,8 +63,4 @@ static struct platform_driver gen_pci_driver = {
},
.probe = gen_pci_probe,
};
-module_platform_driver(gen_pci_driver);
-
-MODULE_DESCRIPTION("Generic PCI host driver");
-MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(gen_pci_driver);
diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 7e9b2de2aa24..6955ffdb89f3 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -732,16 +732,18 @@ static void hv_msi_free(struct irq_domain *domain, struct msi_domain_info *info,
pdev = msi_desc_to_pci_dev(msi);
hbus = info->data;
- hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
- if (!hpdev)
+ int_desc = irq_data_get_irq_chip_data(irq_data);
+ if (!int_desc)
return;
- int_desc = irq_data_get_irq_chip_data(irq_data);
- if (int_desc) {
- irq_data->chip_data = NULL;
- hv_int_desc_free(hpdev, int_desc);
+ irq_data->chip_data = NULL;
+ hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
+ if (!hpdev) {
+ kfree(int_desc);
+ return;
}
+ hv_int_desc_free(hpdev, int_desc);
put_pcichild(hpdev, hv_pcidev_ref_by_slot);
}
@@ -1657,14 +1659,16 @@ static void hv_pci_onchannelcallback(void *context)
continue;
}
+ /* Zero length indicates there are no more packets. */
+ if (ret || !bytes_recvd)
+ break;
+
/*
* All incoming packets must be at least as large as a
* response.
*/
- if (bytes_recvd <= sizeof(struct pci_response)) {
- kfree(buffer);
- return;
- }
+ if (bytes_recvd <= sizeof(struct pci_response))
+ continue;
desc = (struct vmpacket_descriptor *)buffer;
switch (desc->type) {
@@ -1679,8 +1683,7 @@ static void hv_pci_onchannelcallback(void *context)
comp_packet->completion_func(comp_packet->compl_ctxt,
response,
bytes_recvd);
- kfree(buffer);
- return;
+ break;
case VM_PKT_DATA_INBAND:
@@ -1727,8 +1730,9 @@ static void hv_pci_onchannelcallback(void *context)
desc->type, req_id, bytes_recvd);
break;
}
- break;
}
+
+ kfree(buffer);
}
/**
diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c
index 6b8301ef21ca..8ba28834d470 100644
--- a/drivers/pci/host/pci-keystone.c
+++ b/drivers/pci/host/pci-keystone.c
@@ -17,7 +17,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/msi.h>
#include <linux/of_irq.h>
#include <linux/of.h>
@@ -360,7 +360,6 @@ static const struct of_device_id ks_pcie_of_match[] = {
},
{ },
};
-MODULE_DEVICE_TABLE(of, ks_pcie_of_match);
static int __exit ks_pcie_remove(struct platform_device *pdev)
{
@@ -439,9 +438,4 @@ static struct platform_driver ks_pcie_driver __refdata = {
.of_match_table = of_match_ptr(ks_pcie_of_match),
},
};
-
-module_platform_driver(ks_pcie_driver);
-
-MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
-MODULE_DESCRIPTION("Keystone PCIe host controller driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(ks_pcie_driver);
diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
index a21e229d95e0..114ba819277a 100644
--- a/drivers/pci/host/pci-layerscape.c
+++ b/drivers/pci/host/pci-layerscape.c
@@ -12,7 +12,7 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
#include <linux/of_irq.h>
@@ -211,7 +211,6 @@ static const struct of_device_id ls_pcie_of_match[] = {
{ .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
{ },
};
-MODULE_DEVICE_TABLE(of, ls_pcie_of_match);
static int __init ls_add_pcie_port(struct pcie_port *pp,
struct platform_device *pdev)
@@ -275,9 +274,4 @@ static struct platform_driver ls_pcie_driver = {
.of_match_table = ls_pcie_of_match,
},
};
-
-module_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);
-
-MODULE_AUTHOR("Minghuan Lian <Minghuan.Lian@freescale.com>");
-MODULE_DESCRIPTION("Freescale Layerscape PCIe host controller driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 6b451df6502c..307f81d6b479 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -1,6 +1,8 @@
/*
* PCIe driver for Marvell Armada 370 and Armada XP SoCs
*
+ * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
@@ -11,7 +13,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/msi.h>
#include <linux/slab.h>
@@ -839,25 +841,22 @@ static struct pci_ops mvebu_pcie_ops = {
static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct mvebu_pcie *pcie = sys_to_pcie(sys);
- int i;
+ int err, i;
pcie->mem.name = "PCI MEM";
pcie->realio.name = "PCI I/O";
- if (request_resource(&iomem_resource, &pcie->mem))
- return 0;
-
- if (resource_size(&pcie->realio) != 0) {
- if (request_resource(&ioport_resource, &pcie->realio)) {
- release_resource(&pcie->mem);
- return 0;
- }
+ if (resource_size(&pcie->realio) != 0)
pci_add_resource_offset(&sys->resources, &pcie->realio,
sys->io_offset);
- }
+
pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
pci_add_resource(&sys->resources, &pcie->busn);
+ err = devm_request_pci_bus_resources(&pcie->pdev->dev, &sys->resources);
+ if (err)
+ return 0;
+
for (i = 0; i < pcie->nports; i++) {
struct mvebu_pcie_port *port = &pcie->ports[i];
@@ -1298,7 +1297,6 @@ static const struct of_device_id mvebu_pcie_of_match_table[] = {
{ .compatible = "marvell,kirkwood-pcie", },
{},
};
-MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table);
static const struct dev_pm_ops mvebu_pcie_pm_ops = {
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
@@ -1314,8 +1312,4 @@ static struct platform_driver mvebu_pcie_driver = {
},
.probe = mvebu_pcie_probe,
};
-module_platform_driver(mvebu_pcie_driver);
-
-MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
-MODULE_DESCRIPTION("Marvell EBU PCIe driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(mvebu_pcie_driver);
diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c
index 9980a4bdae7e..597566f96f5e 100644
--- a/drivers/pci/host/pci-rcar-gen2.c
+++ b/drivers/pci/host/pci-rcar-gen2.c
@@ -4,6 +4,8 @@
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Cogent Embedded, Inc.
*
+ * Author: Valentine Barshak <valentine.barshak@cogentembedded.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -14,7 +16,6 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/pci.h>
@@ -97,7 +98,6 @@
struct rcar_pci_priv {
struct device *dev;
void __iomem *reg;
- struct resource io_res;
struct resource mem_res;
struct resource *cfg_res;
unsigned busnr;
@@ -194,6 +194,7 @@ static int rcar_pci_setup(int nr, struct pci_sys_data *sys)
struct rcar_pci_priv *priv = sys->private_data;
void __iomem *reg = priv->reg;
u32 val;
+ int ret;
pm_runtime_enable(priv->dev);
pm_runtime_get_sync(priv->dev);
@@ -273,8 +274,10 @@ static int rcar_pci_setup(int nr, struct pci_sys_data *sys)
rcar_pci_setup_errirq(priv);
/* Add PCI resources */
- pci_add_resource(&sys->resources, &priv->io_res);
pci_add_resource(&sys->resources, &priv->mem_res);
+ ret = devm_request_pci_bus_resources(priv->dev, &sys->resources);
+ if (ret < 0)
+ return ret;
/* Setup bus number based on platform device id / of bus-range */
sys->busnr = priv->busnr;
@@ -371,14 +374,6 @@ static int rcar_pci_probe(struct platform_device *pdev)
return -ENOMEM;
priv->mem_res = *mem_res;
- /*
- * The controller does not support/use port I/O,
- * so setup a dummy port I/O region here.
- */
- priv->io_res.start = priv->mem_res.start;
- priv->io_res.end = priv->mem_res.end;
- priv->io_res.flags = IORESOURCE_IO;
-
priv->cfg_res = cfg_res;
priv->irq = platform_get_irq(pdev, 0);
@@ -421,6 +416,7 @@ static int rcar_pci_probe(struct platform_device *pdev)
hw_private[0] = priv;
memset(&hw, 0, sizeof(hw));
hw.nr_controllers = ARRAY_SIZE(hw_private);
+ hw.io_optional = 1;
hw.private_data = hw_private;
hw.map_irq = rcar_pci_map_irq;
hw.ops = &rcar_pci_ops;
@@ -437,8 +433,6 @@ static struct of_device_id rcar_pci_of_match[] = {
{ },
};
-MODULE_DEVICE_TABLE(of, rcar_pci_of_match);
-
static struct platform_driver rcar_pci_driver = {
.driver = {
.name = "pci-rcar-gen2",
@@ -447,9 +441,4 @@ static struct platform_driver rcar_pci_driver = {
},
.probe = rcar_pci_probe,
};
-
-module_platform_driver(rcar_pci_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Renesas R-Car Gen2 internal PCI");
-MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>");
+builtin_platform_driver(rcar_pci_driver);
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index c388468c202a..6de0757b11e4 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -9,6 +9,8 @@
*
* Bits taken from arch/arm/mach-dove/pcie.c
*
+ * Author: Thierry Reding <treding@nvidia.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -32,7 +34,7 @@
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/msi.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
@@ -183,26 +185,26 @@
#define AFI_PEXBIAS_CTRL_0 0x168
-#define RP_VEND_XP 0x00000F00
+#define RP_VEND_XP 0x00000f00
#define RP_VEND_XP_DL_UP (1 << 30)
-#define RP_PRIV_MISC 0x00000FE0
-#define RP_PRIV_MISC_PRSNT_MAP_EP_PRSNT (0xE << 0)
-#define RP_PRIV_MISC_PRSNT_MAP_EP_ABSNT (0xF << 0)
+#define RP_PRIV_MISC 0x00000fe0
+#define RP_PRIV_MISC_PRSNT_MAP_EP_PRSNT (0xe << 0)
+#define RP_PRIV_MISC_PRSNT_MAP_EP_ABSNT (0xf << 0)
#define RP_LINK_CONTROL_STATUS 0x00000090
#define RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE 0x20000000
#define RP_LINK_CONTROL_STATUS_LINKSTAT_MASK 0x3fff0000
-#define PADS_CTL_SEL 0x0000009C
+#define PADS_CTL_SEL 0x0000009c
-#define PADS_CTL 0x000000A0
+#define PADS_CTL 0x000000a0
#define PADS_CTL_IDDQ_1L (1 << 0)
#define PADS_CTL_TX_DATA_EN_1L (1 << 6)
#define PADS_CTL_RX_DATA_EN_1L (1 << 10)
-#define PADS_PLL_CTL_TEGRA20 0x000000B8
-#define PADS_PLL_CTL_TEGRA30 0x000000B4
+#define PADS_PLL_CTL_TEGRA20 0x000000b8
+#define PADS_PLL_CTL_TEGRA30 0x000000b4
#define PADS_PLL_CTL_RST_B4SM (1 << 1)
#define PADS_PLL_CTL_LOCKDET (1 << 8)
#define PADS_PLL_CTL_REFCLK_MASK (0x3 << 16)
@@ -214,9 +216,9 @@
#define PADS_PLL_CTL_TXCLKREF_DIV5 (1 << 20)
#define PADS_PLL_CTL_TXCLKREF_BUF_EN (1 << 22)
-#define PADS_REFCLK_CFG0 0x000000C8
-#define PADS_REFCLK_CFG1 0x000000CC
-#define PADS_REFCLK_BIAS 0x000000D0
+#define PADS_REFCLK_CFG0 0x000000c8
+#define PADS_REFCLK_CFG1 0x000000cc
+#define PADS_REFCLK_BIAS 0x000000d0
/*
* Fields in PADS_REFCLK_CFG*. Those registers form an array of 16-bit
@@ -228,15 +230,6 @@
#define PADS_REFCLK_CFG_PREDI_SHIFT 8 /* 11:8 */
#define PADS_REFCLK_CFG_DRVI_SHIFT 12 /* 15:12 */
-/* Default value provided by HW engineering is 0xfa5c */
-#define PADS_REFCLK_CFG_VALUE \
- ( \
- (0x17 << PADS_REFCLK_CFG_TERM_SHIFT) | \
- (0 << PADS_REFCLK_CFG_E_TERM_SHIFT) | \
- (0xa << PADS_REFCLK_CFG_PREDI_SHIFT) | \
- (0xf << PADS_REFCLK_CFG_DRVI_SHIFT) \
- )
-
struct tegra_msi {
struct msi_controller chip;
DECLARE_BITMAP(used, INT_PCI_MSI_NR);
@@ -252,6 +245,8 @@ struct tegra_pcie_soc_data {
unsigned int msi_base_shift;
u32 pads_pll_ctl;
u32 tx_ref_sel;
+ u32 pads_refclk_cfg0;
+ u32 pads_refclk_cfg1;
bool has_pex_clkreq_en;
bool has_pex_bias_ctrl;
bool has_intr_prsnt_sense;
@@ -274,7 +269,6 @@ struct tegra_pcie {
struct list_head buses;
struct resource *cs;
- struct resource all;
struct resource io;
struct resource pio;
struct resource mem;
@@ -623,30 +617,21 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
sys->mem_offset = pcie->offset.mem;
sys->io_offset = pcie->offset.io;
- err = devm_request_resource(pcie->dev, &pcie->all, &pcie->io);
- if (err < 0)
- return err;
-
- err = devm_request_resource(pcie->dev, &ioport_resource, &pcie->pio);
- if (err < 0)
- return err;
-
- err = devm_request_resource(pcie->dev, &pcie->all, &pcie->mem);
+ err = devm_request_resource(pcie->dev, &iomem_resource, &pcie->io);
if (err < 0)
return err;
- err = devm_request_resource(pcie->dev, &pcie->all, &pcie->prefetch);
- if (err)
- return err;
-
pci_add_resource_offset(&sys->resources, &pcie->pio, sys->io_offset);
pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pcie->prefetch,
sys->mem_offset);
pci_add_resource(&sys->resources, &pcie->busn);
- pci_ioremap_io(pcie->pio.start, pcie->io.start);
+ err = devm_request_pci_bus_resources(pcie->dev, &sys->resources);
+ if (err < 0)
+ return err;
+ pci_remap_iospace(&pcie->pio, pcie->io.start);
return 1;
}
@@ -838,12 +823,6 @@ static int tegra_pcie_phy_enable(struct tegra_pcie *pcie)
value |= PADS_PLL_CTL_RST_B4SM;
pads_writel(pcie, value, soc->pads_pll_ctl);
- /* Configure the reference clock driver */
- value = PADS_REFCLK_CFG_VALUE | (PADS_REFCLK_CFG_VALUE << 16);
- pads_writel(pcie, value, PADS_REFCLK_CFG0);
- if (soc->num_ports > 2)
- pads_writel(pcie, PADS_REFCLK_CFG_VALUE, PADS_REFCLK_CFG1);
-
/* wait for the PLL to lock */
err = tegra_pcie_pll_wait(pcie, 500);
if (err < 0) {
@@ -927,6 +906,7 @@ static int tegra_pcie_port_phy_power_off(struct tegra_pcie_port *port)
static int tegra_pcie_phy_power_on(struct tegra_pcie *pcie)
{
+ const struct tegra_pcie_soc_data *soc = pcie->soc_data;
struct tegra_pcie_port *port;
int err;
@@ -952,6 +932,12 @@ static int tegra_pcie_phy_power_on(struct tegra_pcie *pcie)
}
}
+ /* Configure the reference clock driver */
+ pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0);
+
+ if (soc->num_ports > 2)
+ pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1);
+
return 0;
}
@@ -1822,12 +1808,6 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
struct resource res;
int err;
- memset(&pcie->all, 0, sizeof(pcie->all));
- pcie->all.flags = IORESOURCE_MEM;
- pcie->all.name = np->full_name;
- pcie->all.start = ~0;
- pcie->all.end = 0;
-
if (of_pci_range_parser_init(&parser, np)) {
dev_err(pcie->dev, "missing \"ranges\" property\n");
return -EINVAL;
@@ -1880,18 +1860,8 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
}
break;
}
-
- if (res.start <= pcie->all.start)
- pcie->all.start = res.start;
-
- if (res.end >= pcie->all.end)
- pcie->all.end = res.end;
}
- err = devm_request_resource(pcie->dev, &iomem_resource, &pcie->all);
- if (err < 0)
- return err;
-
err = of_pci_parse_bus_range(np, &pcie->busn);
if (err < 0) {
dev_err(pcie->dev, "failed to parse ranges property: %d\n",
@@ -2078,6 +2048,7 @@ static const struct tegra_pcie_soc_data tegra20_pcie_data = {
.msi_base_shift = 0,
.pads_pll_ctl = PADS_PLL_CTL_TEGRA20,
.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10,
+ .pads_refclk_cfg0 = 0xfa5cfa5c,
.has_pex_clkreq_en = false,
.has_pex_bias_ctrl = false,
.has_intr_prsnt_sense = false,
@@ -2090,6 +2061,8 @@ static const struct tegra_pcie_soc_data tegra30_pcie_data = {
.msi_base_shift = 8,
.pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
+ .pads_refclk_cfg0 = 0xfa5cfa5c,
+ .pads_refclk_cfg1 = 0xfa5cfa5c,
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
@@ -2102,6 +2075,7 @@ static const struct tegra_pcie_soc_data tegra124_pcie_data = {
.msi_base_shift = 8,
.pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
+ .pads_refclk_cfg0 = 0x44ac44ac,
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
@@ -2115,7 +2089,6 @@ static const struct of_device_id tegra_pcie_of_match[] = {
{ .compatible = "nvidia,tegra20-pcie", .data = &tegra20_pcie_data },
{ },
};
-MODULE_DEVICE_TABLE(of, tegra_pcie_of_match);
static void *tegra_pcie_ports_seq_start(struct seq_file *s, loff_t *pos)
{
@@ -2249,8 +2222,6 @@ static int tegra_pcie_probe(struct platform_device *pdev)
if (err < 0)
return err;
- pcibios_min_mem = 0;
-
err = tegra_pcie_get_resources(pcie);
if (err < 0) {
dev_err(&pdev->dev, "failed to request resources: %d\n", err);
@@ -2306,8 +2277,4 @@ static struct platform_driver tegra_pcie_driver = {
},
.probe = tegra_pcie_probe,
};
-module_platform_driver(tegra_pcie_driver);
-
-MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
-MODULE_DESCRIPTION("NVIDIA Tegra PCIe driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(tegra_pcie_driver);
diff --git a/drivers/pci/host/pci-thunder-ecam.c b/drivers/pci/host/pci-thunder-ecam.c
index 540d030613eb..d50a3dc2d8db 100644
--- a/drivers/pci/host/pci-thunder-ecam.c
+++ b/drivers/pci/host/pci-thunder-ecam.c
@@ -7,14 +7,13 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/of_pci.h>
#include <linux/of.h>
+#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../ecam.h"
-
static void set_val(u32 v, int where, int size, u32 *val)
{
int shift = (where & 3) * 8;
@@ -360,7 +359,6 @@ static const struct of_device_id thunder_ecam_of_match[] = {
{ .compatible = "cavium,pci-host-thunder-ecam" },
{ },
};
-MODULE_DEVICE_TABLE(of, thunder_ecam_of_match);
static int thunder_ecam_probe(struct platform_device *pdev)
{
@@ -374,7 +372,4 @@ static struct platform_driver thunder_ecam_driver = {
},
.probe = thunder_ecam_probe,
};
-module_platform_driver(thunder_ecam_driver);
-
-MODULE_DESCRIPTION("Thunder ECAM PCI host driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(thunder_ecam_driver);
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index 9b8ab94f3c8c..6abaf80ffb39 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -15,13 +15,12 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../ecam.h"
-
#define PEM_CFG_WR 0x28
#define PEM_CFG_RD 0x30
@@ -285,8 +284,9 @@ static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
return pci_generic_config_write(bus, devfn, where, size, val);
}
-static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg)
+static int thunder_pem_init(struct pci_config_window *cfg)
{
+ struct device *dev = cfg->parent;
resource_size_t bar4_start;
struct resource *res_pem;
struct thunder_pem_pci *pem_pci;
@@ -346,7 +346,6 @@ static const struct of_device_id thunder_pem_of_match[] = {
{ .compatible = "cavium,pci-host-thunder-pem" },
{ },
};
-MODULE_DEVICE_TABLE(of, thunder_pem_of_match);
static int thunder_pem_probe(struct platform_device *pdev)
{
@@ -360,7 +359,4 @@ static struct platform_driver thunder_pem_driver = {
},
.probe = thunder_pem_probe,
};
-module_platform_driver(thunder_pem_driver);
-
-MODULE_DESCRIPTION("Thunder PEM PCIe host driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(thunder_pem_driver);
diff --git a/drivers/pci/host/pci-versatile.c b/drivers/pci/host/pci-versatile.c
index f843a72dc51c..f234405770ab 100644
--- a/drivers/pci/host/pci-versatile.c
+++ b/drivers/pci/host/pci-versatile.c
@@ -80,21 +80,21 @@ static int versatile_pci_parse_request_of_pci_ranges(struct device *dev,
if (err)
return err;
+ err = devm_request_pci_bus_resources(dev, res);
+ if (err)
+ goto out_release_res;
+
resource_list_for_each_entry(win, res) {
- struct resource *parent, *res = win->res;
+ struct resource *res = win->res;
switch (resource_type(res)) {
case IORESOURCE_IO:
- parent = &ioport_resource;
err = pci_remap_iospace(res, iobase);
- if (err) {
+ if (err)
dev_warn(dev, "error %d: failed to map resource %pR\n",
err, res);
- continue;
- }
break;
case IORESOURCE_MEM:
- parent = &iomem_resource;
res_valid |= !(res->flags & IORESOURCE_PREFETCH);
writel(res->start >> 28, PCI_IMAP(mem));
@@ -102,23 +102,14 @@ static int versatile_pci_parse_request_of_pci_ranges(struct device *dev,
mem++;
break;
- case IORESOURCE_BUS:
- default:
- continue;
}
-
- err = devm_request_resource(dev, parent, res);
- if (err)
- goto out_release_res;
}
- if (!res_valid) {
- dev_err(dev, "non-prefetchable memory resource required\n");
- err = -EINVAL;
- goto out_release_res;
- }
+ if (res_valid)
+ return 0;
- return 0;
+ dev_err(dev, "non-prefetchable memory resource required\n");
+ err = -EINVAL;
out_release_res:
pci_free_resource_list(res);
diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
index ae00ce22d5a6..a81273c23341 100644
--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -21,7 +21,7 @@
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/memblock.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -540,14 +540,20 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
if (ret)
return ret;
+ ret = devm_request_pci_bus_resources(&pdev->dev, &res);
+ if (ret)
+ goto error;
+
ret = xgene_pcie_setup(port, &res, iobase);
if (ret)
- return ret;
+ goto error;
bus = pci_create_root_bus(&pdev->dev, 0,
&xgene_pcie_ops, port, &res);
- if (!bus)
- return -ENOMEM;
+ if (!bus) {
+ ret = -ENOMEM;
+ goto error;
+ }
pci_scan_child_bus(bus);
pci_assign_unassigned_bus_resources(bus);
@@ -555,6 +561,10 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
platform_set_drvdata(pdev, port);
return 0;
+
+error:
+ pci_free_resource_list(&res);
+ return ret;
}
static const struct of_device_id xgene_pcie_match_table[] = {
@@ -569,8 +579,4 @@ static struct platform_driver xgene_pcie_driver = {
},
.probe = xgene_pcie_probe_bridge,
};
-module_platform_driver(xgene_pcie_driver);
-
-MODULE_AUTHOR("Tanmay Inamdar <tinamdar@apm.com>");
-MODULE_DESCRIPTION("APM X-Gene PCIe driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(xgene_pcie_driver);
diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c
index dbac6fb3f0bd..2b7837650db8 100644
--- a/drivers/pci/host/pcie-altera.c
+++ b/drivers/pci/host/pcie-altera.c
@@ -61,6 +61,8 @@
#define TLP_LOOP 500
#define RP_DEVFN 0
+#define LINK_UP_TIMEOUT 5000
+
#define INTX_NUM 4
#define DWORD_MASK 3
@@ -81,9 +83,30 @@ struct tlp_rp_regpair_t {
u32 reg1;
};
+static inline void cra_writel(struct altera_pcie *pcie, const u32 value,
+ const u32 reg)
+{
+ writel_relaxed(value, pcie->cra_base + reg);
+}
+
+static inline u32 cra_readl(struct altera_pcie *pcie, const u32 reg)
+{
+ return readl_relaxed(pcie->cra_base + reg);
+}
+
+static bool altera_pcie_link_is_up(struct altera_pcie *pcie)
+{
+ return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
+}
+
static void altera_pcie_retrain(struct pci_dev *dev)
{
u16 linkcap, linkstat;
+ struct altera_pcie *pcie = dev->bus->sysdata;
+ int timeout = 0;
+
+ if (!altera_pcie_link_is_up(pcie))
+ return;
/*
* Set the retrain bit if the PCIe rootport support > 2.5GB/s, but
@@ -95,9 +118,16 @@ static void altera_pcie_retrain(struct pci_dev *dev)
return;
pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &linkstat);
- if ((linkstat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB)
+ if ((linkstat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB) {
pcie_capability_set_word(dev, PCI_EXP_LNKCTL,
PCI_EXP_LNKCTL_RL);
+ while (!altera_pcie_link_is_up(pcie)) {
+ timeout++;
+ if (timeout > LINK_UP_TIMEOUT)
+ break;
+ udelay(5);
+ }
+ }
}
DECLARE_PCI_FIXUP_EARLY(0x1172, PCI_ANY_ID, altera_pcie_retrain);
@@ -120,17 +150,6 @@ static bool altera_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int devfn,
return false;
}
-static inline void cra_writel(struct altera_pcie *pcie, const u32 value,
- const u32 reg)
-{
- writel_relaxed(value, pcie->cra_base + reg);
-}
-
-static inline u32 cra_readl(struct altera_pcie *pcie, const u32 reg)
-{
- return readl_relaxed(pcie->cra_base + reg);
-}
-
static void tlp_write_tx(struct altera_pcie *pcie,
struct tlp_rp_regpair_t *tlp_rp_regdata)
{
@@ -139,11 +158,6 @@ static void tlp_write_tx(struct altera_pcie *pcie,
cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL);
}
-static bool altera_pcie_link_is_up(struct altera_pcie *pcie)
-{
- return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
-}
-
static bool altera_pcie_valid_config(struct altera_pcie *pcie,
struct pci_bus *bus, int dev)
{
@@ -415,11 +429,6 @@ static void altera_pcie_isr(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static void altera_pcie_release_of_pci_ranges(struct altera_pcie *pcie)
-{
- pci_free_resource_list(&pcie->resources);
-}
-
static int altera_pcie_parse_request_of_pci_ranges(struct altera_pcie *pcie)
{
int err, res_valid = 0;
@@ -432,33 +441,25 @@ static int altera_pcie_parse_request_of_pci_ranges(struct altera_pcie *pcie)
if (err)
return err;
+ err = devm_request_pci_bus_resources(dev, &pcie->resources);
+ if (err)
+ goto out_release_res;
+
resource_list_for_each_entry(win, &pcie->resources) {
- struct resource *parent, *res = win->res;
+ struct resource *res = win->res;
- switch (resource_type(res)) {
- case IORESOURCE_MEM:
- parent = &iomem_resource;
+ if (resource_type(res) == IORESOURCE_MEM)
res_valid |= !(res->flags & IORESOURCE_PREFETCH);
- break;
- default:
- continue;
- }
-
- err = devm_request_resource(dev, parent, res);
- if (err)
- goto out_release_res;
}
- if (!res_valid) {
- dev_err(dev, "non-prefetchable memory resource required\n");
- err = -EINVAL;
- goto out_release_res;
- }
+ if (res_valid)
+ return 0;
- return 0;
+ dev_err(dev, "non-prefetchable memory resource required\n");
+ err = -EINVAL;
out_release_res:
- altera_pcie_release_of_pci_ranges(pcie);
+ pci_free_resource_list(&pcie->resources);
return err;
}
diff --git a/drivers/pci/host/pcie-armada8k.c b/drivers/pci/host/pcie-armada8k.c
index 55723567b5d4..0f4f570068e3 100644
--- a/drivers/pci/host/pcie-armada8k.c
+++ b/drivers/pci/host/pcie-armada8k.c
@@ -5,6 +5,9 @@
*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
+ * Author: Yehuda Yitshak <yehuday@marvell.com>
+ * Author: Shadi Ammouri <shadi@marvell.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
@@ -14,7 +17,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
@@ -244,7 +247,6 @@ static const struct of_device_id armada8k_pcie_of_match[] = {
{ .compatible = "marvell,armada8k-pcie", },
{},
};
-MODULE_DEVICE_TABLE(of, armada8k_pcie_of_match);
static struct platform_driver armada8k_pcie_driver = {
.probe = armada8k_pcie_probe,
@@ -253,10 +255,4 @@ static struct platform_driver armada8k_pcie_driver = {
.of_match_table = of_match_ptr(armada8k_pcie_of_match),
},
};
-
-module_platform_driver(armada8k_pcie_driver);
-
-MODULE_DESCRIPTION("Armada 8k PCIe host controller driver");
-MODULE_AUTHOR("Yehuda Yitshak <yehuday@marvell.com>");
-MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(armada8k_pcie_driver);
diff --git a/drivers/pci/host/pcie-artpec6.c b/drivers/pci/host/pcie-artpec6.c
new file mode 100644
index 000000000000..16ba70b7ec65
--- /dev/null
+++ b/drivers/pci/host/pcie-artpec6.c
@@ -0,0 +1,280 @@
+/*
+ * PCIe host controller driver for Axis ARTPEC-6 SoC
+ *
+ * Author: Niklas Cassel <niklas.cassel@axis.com>
+ *
+ * Based on work done by Phil Edworthy <phil@edworthys.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "pcie-designware.h"
+
+#define to_artpec6_pcie(x) container_of(x, struct artpec6_pcie, pp)
+
+struct artpec6_pcie {
+ struct pcie_port pp;
+ struct regmap *regmap;
+ void __iomem *phy_base;
+};
+
+/* PCIe Port Logic registers (memory-mapped) */
+#define PL_OFFSET 0x700
+#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
+#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
+
+#define MISC_CONTROL_1_OFF (PL_OFFSET + 0x1bc)
+#define DBI_RO_WR_EN 1
+
+/* ARTPEC-6 specific registers */
+#define PCIECFG 0x18
+#define PCIECFG_DBG_OEN (1 << 24)
+#define PCIECFG_CORE_RESET_REQ (1 << 21)
+#define PCIECFG_LTSSM_ENABLE (1 << 20)
+#define PCIECFG_CLKREQ_B (1 << 11)
+#define PCIECFG_REFCLK_ENABLE (1 << 10)
+#define PCIECFG_PLL_ENABLE (1 << 9)
+#define PCIECFG_PCLK_ENABLE (1 << 8)
+#define PCIECFG_RISRCREN (1 << 4)
+#define PCIECFG_MODE_TX_DRV_EN (1 << 3)
+#define PCIECFG_CISRREN (1 << 2)
+#define PCIECFG_MACRO_ENABLE (1 << 0)
+
+#define NOCCFG 0x40
+#define NOCCFG_ENABLE_CLK_PCIE (1 << 4)
+#define NOCCFG_POWER_PCIE_IDLEACK (1 << 3)
+#define NOCCFG_POWER_PCIE_IDLE (1 << 2)
+#define NOCCFG_POWER_PCIE_IDLEREQ (1 << 1)
+
+#define PHY_STATUS 0x118
+#define PHY_COSPLLLOCK (1 << 0)
+
+#define ARTPEC6_CPU_TO_BUS_ADDR 0x0fffffff
+
+static int artpec6_pcie_establish_link(struct pcie_port *pp)
+{
+ struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pp);
+ u32 val;
+ unsigned int retries;
+
+ /* Hold DW core in reset */
+ regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+ val |= PCIECFG_CORE_RESET_REQ;
+ regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+
+ regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+ val |= PCIECFG_RISRCREN | /* Receiver term. 50 Ohm */
+ PCIECFG_MODE_TX_DRV_EN |
+ PCIECFG_CISRREN | /* Reference clock term. 100 Ohm */
+ PCIECFG_MACRO_ENABLE;
+ val |= PCIECFG_REFCLK_ENABLE;
+ val &= ~PCIECFG_DBG_OEN;
+ val &= ~PCIECFG_CLKREQ_B;
+ regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+ usleep_range(5000, 6000);
+
+ regmap_read(artpec6_pcie->regmap, NOCCFG, &val);
+ val |= NOCCFG_ENABLE_CLK_PCIE;
+ regmap_write(artpec6_pcie->regmap, NOCCFG, val);
+ usleep_range(20, 30);
+
+ regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+ val |= PCIECFG_PCLK_ENABLE | PCIECFG_PLL_ENABLE;
+ regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+ usleep_range(6000, 7000);
+
+ regmap_read(artpec6_pcie->regmap, NOCCFG, &val);
+ val &= ~NOCCFG_POWER_PCIE_IDLEREQ;
+ regmap_write(artpec6_pcie->regmap, NOCCFG, val);
+
+ retries = 50;
+ do {
+ usleep_range(1000, 2000);
+ regmap_read(artpec6_pcie->regmap, NOCCFG, &val);
+ retries--;
+ } while (retries &&
+ (val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE)));
+
+ retries = 50;
+ do {
+ usleep_range(1000, 2000);
+ val = readl(artpec6_pcie->phy_base + PHY_STATUS);
+ retries--;
+ } while (retries && !(val & PHY_COSPLLLOCK));
+
+ /* Take DW core out of reset */
+ regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+ val &= ~PCIECFG_CORE_RESET_REQ;
+ regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+ usleep_range(100, 200);
+
+ /*
+ * Enable writing to config regs. This is required as the Synopsys
+ * driver changes the class code. That register needs DBI write enable.
+ */
+ writel(DBI_RO_WR_EN, pp->dbi_base + MISC_CONTROL_1_OFF);
+
+ pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR;
+ pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR;
+ pp->cfg0_base &= ARTPEC6_CPU_TO_BUS_ADDR;
+ pp->cfg1_base &= ARTPEC6_CPU_TO_BUS_ADDR;
+
+ /* setup root complex */
+ dw_pcie_setup_rc(pp);
+
+ /* assert LTSSM enable */
+ regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+ val |= PCIECFG_LTSSM_ENABLE;
+ regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+
+ /* check if the link is up or not */
+ if (!dw_pcie_wait_for_link(pp))
+ return 0;
+
+ dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
+
+ return -ETIMEDOUT;
+}
+
+static void artpec6_pcie_enable_interrupts(struct pcie_port *pp)
+{
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dw_pcie_msi_init(pp);
+}
+
+static void artpec6_pcie_host_init(struct pcie_port *pp)
+{
+ artpec6_pcie_establish_link(pp);
+ artpec6_pcie_enable_interrupts(pp);
+}
+
+static int artpec6_pcie_link_up(struct pcie_port *pp)
+{
+ u32 rc;
+
+ /*
+ * Get status from Synopsys IP
+ * link is debug bit 36, debug register 1 starts at bit 32
+ */
+ rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32));
+ if (rc)
+ return 1;
+
+ return 0;
+}
+
+static struct pcie_host_ops artpec6_pcie_host_ops = {
+ .link_up = artpec6_pcie_link_up,
+ .host_init = artpec6_pcie_host_init,
+};
+
+static irqreturn_t artpec6_pcie_msi_handler(int irq, void *arg)
+{
+ struct pcie_port *pp = arg;
+
+ return dw_handle_msi_irq(pp);
+}
+
+static int __init artpec6_add_pcie_port(struct pcie_port *pp,
+ struct platform_device *pdev)
+{
+ int ret;
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ pp->msi_irq = platform_get_irq_byname(pdev, "msi");
+ if (pp->msi_irq <= 0) {
+ dev_err(&pdev->dev, "failed to get MSI irq\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(&pdev->dev, pp->msi_irq,
+ artpec6_pcie_msi_handler,
+ IRQF_SHARED | IRQF_NO_THREAD,
+ "artpec6-pcie-msi", pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request MSI irq\n");
+ return ret;
+ }
+ }
+
+ pp->root_bus_nr = -1;
+ pp->ops = &artpec6_pcie_host_ops;
+
+ ret = dw_pcie_host_init(pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize host\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int artpec6_pcie_probe(struct platform_device *pdev)
+{
+ struct artpec6_pcie *artpec6_pcie;
+ struct pcie_port *pp;
+ struct resource *dbi_base;
+ struct resource *phy_base;
+ int ret;
+
+ artpec6_pcie = devm_kzalloc(&pdev->dev, sizeof(*artpec6_pcie),
+ GFP_KERNEL);
+ if (!artpec6_pcie)
+ return -ENOMEM;
+
+ pp = &artpec6_pcie->pp;
+ pp->dev = &pdev->dev;
+
+ dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
+ pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
+ if (IS_ERR(pp->dbi_base))
+ return PTR_ERR(pp->dbi_base);
+
+ phy_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
+ artpec6_pcie->phy_base = devm_ioremap_resource(&pdev->dev, phy_base);
+ if (IS_ERR(artpec6_pcie->phy_base))
+ return PTR_ERR(artpec6_pcie->phy_base);
+
+ artpec6_pcie->regmap =
+ syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "axis,syscon-pcie");
+ if (IS_ERR(artpec6_pcie->regmap))
+ return PTR_ERR(artpec6_pcie->regmap);
+
+ ret = artpec6_add_pcie_port(pp, pdev);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, artpec6_pcie);
+ return 0;
+}
+
+static const struct of_device_id artpec6_pcie_of_match[] = {
+ { .compatible = "axis,artpec6-pcie", },
+ {},
+};
+
+static struct platform_driver artpec6_pcie_driver = {
+ .probe = artpec6_pcie_probe,
+ .driver = {
+ .name = "artpec6-pcie",
+ .of_match_table = artpec6_pcie_of_match,
+ },
+};
+builtin_platform_driver(artpec6_pcie_driver);
diff --git a/drivers/pci/host/pcie-designware-plat.c b/drivers/pci/host/pcie-designware-plat.c
index b3500994d08a..c8079dc81c10 100644
--- a/drivers/pci/host/pcie-designware-plat.c
+++ b/drivers/pci/host/pcie-designware-plat.c
@@ -14,7 +14,7 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of_gpio.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
@@ -121,7 +121,6 @@ static const struct of_device_id dw_plat_pcie_of_match[] = {
{ .compatible = "snps,dw-pcie", },
{},
};
-MODULE_DEVICE_TABLE(of, dw_plat_pcie_of_match);
static struct platform_driver dw_plat_pcie_driver = {
.driver = {
@@ -130,9 +129,4 @@ static struct platform_driver dw_plat_pcie_driver = {
},
.probe = dw_plat_pcie_probe,
};
-
-module_platform_driver(dw_plat_pcie_driver);
-
-MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
-MODULE_DESCRIPTION("Synopsys PCIe host controller glue platform driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(dw_plat_pcie_driver);
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index aafd766546f3..12afce19890b 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -452,6 +452,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
if (ret)
return ret;
+ ret = devm_request_pci_bus_resources(&pdev->dev, &res);
+ if (ret)
+ goto error;
+
/* Get the I/O and memory ranges from DT */
resource_list_for_each_entry(win, &res) {
switch (resource_type(win->res)) {
@@ -461,11 +465,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
pp->io_size = resource_size(pp->io);
pp->io_bus_addr = pp->io->start - win->offset;
ret = pci_remap_iospace(pp->io, pp->io_base);
- if (ret) {
+ if (ret)
dev_warn(pp->dev, "error %d: failed to map resource %pR\n",
ret, pp->io);
- continue;
- }
break;
case IORESOURCE_MEM:
pp->mem = win->res;
@@ -483,8 +485,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
case IORESOURCE_BUS:
pp->busn = win->res;
break;
- default:
- continue;
}
}
@@ -493,7 +493,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
resource_size(pp->cfg));
if (!pp->dbi_base) {
dev_err(pp->dev, "error with ioremap\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto error;
}
}
@@ -504,7 +505,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
pp->cfg0_size);
if (!pp->va_cfg0_base) {
dev_err(pp->dev, "error with ioremap in function\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto error;
}
}
@@ -513,7 +515,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
pp->cfg1_size);
if (!pp->va_cfg1_base) {
dev_err(pp->dev, "error with ioremap\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto error;
}
}
@@ -528,7 +531,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
&dw_pcie_msi_chip);
if (!pp->irq_domain) {
dev_err(pp->dev, "irq domain init failed\n");
- return -ENXIO;
+ ret = -ENXIO;
+ goto error;
}
for (i = 0; i < MAX_MSI_IRQS; i++)
@@ -536,7 +540,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
} else {
ret = pp->ops->msi_host_init(pp, &dw_pcie_msi_chip);
if (ret < 0)
- return ret;
+ goto error;
}
}
@@ -552,8 +556,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
} else
bus = pci_scan_root_bus(pp->dev, pp->root_bus_nr, &dw_pcie_ops,
pp, &res);
- if (!bus)
- return -ENOMEM;
+ if (!bus) {
+ ret = -ENOMEM;
+ goto error;
+ }
if (pp->ops->scan_bus)
pp->ops->scan_bus(pp);
@@ -571,6 +577,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
pci_bus_add_devices(bus);
return 0;
+
+error:
+ pci_free_resource_list(&res);
+ return ret;
}
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c
index 3e98d4edae2d..7ee9dfcc45fb 100644
--- a/drivers/pci/host/pcie-hisi.c
+++ b/drivers/pci/host/pcie-hisi.c
@@ -12,7 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
@@ -235,9 +235,6 @@ static const struct of_device_id hisi_pcie_of_match[] = {
{},
};
-
-MODULE_DEVICE_TABLE(of, hisi_pcie_of_match);
-
static struct platform_driver hisi_pcie_driver = {
.probe = hisi_pcie_probe,
.driver = {
@@ -245,10 +242,4 @@ static struct platform_driver hisi_pcie_driver = {
.of_match_table = hisi_pcie_of_match,
},
};
-
-module_platform_driver(hisi_pcie_driver);
-
-MODULE_AUTHOR("Zhou Wang <wangzhou1@hisilicon.com>");
-MODULE_AUTHOR("Dacai Zhu <zhudacai@hisilicon.com>");
-MODULE_AUTHOR("Gabriele Paoloni <gabriele.paoloni@huawei.com>");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(hisi_pcie_driver);
diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index a576aeeb22da..e167b2f0098d 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -462,6 +462,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
if (!pcie || !pcie->dev || !pcie->base)
return -EINVAL;
+ ret = devm_request_pci_bus_resources(pcie->dev, res);
+ if (ret)
+ return ret;
+
ret = phy_init(pcie->phy);
if (ret) {
dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 35092188039b..65db7a221509 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -7,6 +7,8 @@
* arch/sh/drivers/pci/ops-sh7786.c
* Copyright (C) 2009 - 2011 Paul Mundt
*
+ * Author: Phil Edworthy <phil.edworthy@renesas.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
@@ -18,7 +20,7 @@
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/msi.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -936,12 +938,6 @@ static const struct of_device_id rcar_pcie_of_match[] = {
{ .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init },
{},
};
-MODULE_DEVICE_TABLE(of, rcar_pcie_of_match);
-
-static void rcar_pcie_release_of_pci_ranges(struct rcar_pcie *pci)
-{
- pci_free_resource_list(&pci->resources);
-}
static int rcar_pcie_parse_request_of_pci_ranges(struct rcar_pcie *pci)
{
@@ -955,37 +951,25 @@ static int rcar_pcie_parse_request_of_pci_ranges(struct rcar_pcie *pci)
if (err)
return err;
+ err = devm_request_pci_bus_resources(dev, &pci->resources);
+ if (err)
+ goto out_release_res;
+
resource_list_for_each_entry(win, &pci->resources) {
- struct resource *parent, *res = win->res;
+ struct resource *res = win->res;
- switch (resource_type(res)) {
- case IORESOURCE_IO:
- parent = &ioport_resource;
+ if (resource_type(res) == IORESOURCE_IO) {
err = pci_remap_iospace(res, iobase);
- if (err) {
+ if (err)
dev_warn(dev, "error %d: failed to map resource %pR\n",
err, res);
- continue;
- }
- break;
- case IORESOURCE_MEM:
- parent = &iomem_resource;
- break;
-
- case IORESOURCE_BUS:
- default:
- continue;
}
-
- err = devm_request_resource(dev, parent, res);
- if (err)
- goto out_release_res;
}
return 0;
out_release_res:
- rcar_pcie_release_of_pci_ranges(pci);
+ pci_free_resource_list(&pci->resources);
return err;
}
@@ -1073,8 +1057,4 @@ static struct platform_driver rcar_pcie_driver = {
},
.probe = rcar_pcie_probe,
};
-module_platform_driver(rcar_pcie_driver);
-
-MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>");
-MODULE_DESCRIPTION("Renesas R-Car PCIe driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(rcar_pcie_driver);
diff --git a/drivers/pci/host/pcie-xilinx-nwl.c b/drivers/pci/host/pcie-xilinx-nwl.c
index 3479d30e2be8..0b597d9190b4 100644
--- a/drivers/pci/host/pcie-xilinx-nwl.c
+++ b/drivers/pci/host/pcie-xilinx-nwl.c
@@ -825,27 +825,33 @@ static int nwl_pcie_probe(struct platform_device *pdev)
err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
if (err) {
- pr_err("Getting bridge resources failed\n");
+ dev_err(pcie->dev, "Getting bridge resources failed\n");
return err;
}
+ err = devm_request_pci_bus_resources(pcie->dev, &res);
+ if (err)
+ goto error;
+
err = nwl_pcie_init_irq_domain(pcie);
if (err) {
dev_err(pcie->dev, "Failed creating IRQ Domain\n");
- return err;
+ goto error;
}
bus = pci_create_root_bus(&pdev->dev, pcie->root_busno,
&nwl_pcie_ops, pcie, &res);
- if (!bus)
- return -ENOMEM;
+ if (!bus) {
+ err = -ENOMEM;
+ goto error;
+ }
if (IS_ENABLED(CONFIG_PCI_MSI)) {
err = nwl_pcie_enable_msi(pcie, bus);
if (err < 0) {
dev_err(&pdev->dev,
"failed to enable MSI support: %d\n", err);
- return err;
+ goto error;
}
}
pci_scan_child_bus(bus);
@@ -855,6 +861,10 @@ static int nwl_pcie_probe(struct platform_device *pdev)
pci_bus_add_devices(bus);
platform_set_drvdata(pdev, pcie);
return 0;
+
+error:
+ pci_free_resource_list(&res);
+ return err;
}
static int nwl_pcie_remove(struct platform_device *pdev)
diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 65f0fe0c2eaf..a30e01639557 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -550,7 +550,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
pcie_intc_node = of_get_next_child(node, NULL);
if (!pcie_intc_node) {
dev_err(dev, "No PCIe Intc node found\n");
- return PTR_ERR(pcie_intc_node);
+ return -ENODEV;
}
port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
@@ -558,7 +558,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
port);
if (!port->irq_domain) {
dev_err(dev, "Failed to get a INTx IRQ domain\n");
- return PTR_ERR(port->irq_domain);
+ return -ENODEV;
}
/* Setup MSI */
@@ -569,7 +569,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
&xilinx_pcie_msi_chip);
if (!port->irq_domain) {
dev_err(dev, "Failed to get a MSI IRQ domain\n");
- return PTR_ERR(port->irq_domain);
+ return -ENODEV;
}
xilinx_pcie_enable_msi(port);
@@ -660,7 +660,6 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
struct xilinx_pcie_port *port;
struct device *dev = &pdev->dev;
struct pci_bus *bus;
-
int err;
resource_size_t iobase = 0;
LIST_HEAD(res);
@@ -694,10 +693,17 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
dev_err(dev, "Getting bridge resources failed\n");
return err;
}
+
+ err = devm_request_pci_bus_resources(dev, &res);
+ if (err)
+ goto error;
+
bus = pci_create_root_bus(&pdev->dev, 0,
&xilinx_pcie_ops, port, &res);
- if (!bus)
- return -ENOMEM;
+ if (!bus) {
+ err = -ENOMEM;
+ goto error;
+ }
#ifdef CONFIG_PCI_MSI
xilinx_pcie_msi_chip.dev = port->dev;
@@ -712,6 +718,10 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, port);
return 0;
+
+error:
+ pci_free_resource_list(&res);
+ return err;
}
/**
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index fa49f9143b80..6a33ddcfa20b 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -675,6 +675,8 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge)
if (bridge->is_going_away)
return;
+ pm_runtime_get_sync(&bridge->pci_dev->dev);
+
list_for_each_entry(slot, &bridge->slots, node) {
struct pci_bus *bus = slot->bus;
struct pci_dev *dev, *tmp;
@@ -694,6 +696,8 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge)
disable_slot(slot);
}
}
+
+ pm_runtime_put(&bridge->pci_dev->dev);
}
/*
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 5c24e938042f..08e84d61874e 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -546,6 +546,10 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
u8 present;
bool link;
+ /* Interrupts cannot originate from a controller that's asleep */
+ if (pdev->current_state == PCI_D3cold)
+ return IRQ_NONE;
+
/*
* In order to guarantee that all interrupt events are
* serviced, we need to re-inspect Slot Status register after
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index a080f4496fe2..a02981efdad5 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -4,6 +4,7 @@
*
* Copyright (C) 2003-2004 Intel
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Copyright (C) 2016 Christoph Hellwig.
*/
#include <linux/err.h>
@@ -207,6 +208,12 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
desc->masked = __pci_msi_desc_mask_irq(desc, mask, flag);
}
+static void __iomem *pci_msix_desc_addr(struct msi_desc *desc)
+{
+ return desc->mask_base +
+ desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
+}
+
/*
* This internal function does not flush PCI writes to the device.
* All users must ensure that they read from the device before either
@@ -217,8 +224,6 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag)
{
u32 mask_bits = desc->masked;
- unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL;
if (pci_msi_ignore_mask)
return 0;
@@ -226,7 +231,7 @@ u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag)
mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
if (flag)
mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT;
- writel(mask_bits, desc->mask_base + offset);
+ writel(mask_bits, pci_msix_desc_addr(desc) + PCI_MSIX_ENTRY_VECTOR_CTRL);
return mask_bits;
}
@@ -284,8 +289,7 @@ void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
BUG_ON(dev->current_state != PCI_D0);
if (entry->msi_attrib.is_msix) {
- void __iomem *base = entry->mask_base +
- entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
+ void __iomem *base = pci_msix_desc_addr(entry);
msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR);
msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
@@ -315,9 +319,7 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
if (dev->current_state != PCI_D0) {
/* Don't touch the hardware now */
} else if (entry->msi_attrib.is_msix) {
- void __iomem *base;
- base = entry->mask_base +
- entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
+ void __iomem *base = pci_msix_desc_addr(entry);
writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
@@ -567,6 +569,7 @@ static struct msi_desc *msi_setup_entry(struct pci_dev *dev, int nvec)
entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
entry->nvec_used = nvec;
+ entry->affinity = dev->irq_affinity;
if (control & PCI_MSI_FLAGS_64BIT)
entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
@@ -678,10 +681,18 @@ static void __iomem *msix_map_region(struct pci_dev *dev, unsigned nr_entries)
static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
struct msix_entry *entries, int nvec)
{
+ const struct cpumask *mask = NULL;
struct msi_desc *entry;
- int i;
+ int cpu = -1, i;
for (i = 0; i < nvec; i++) {
+ if (dev->irq_affinity) {
+ cpu = cpumask_next(cpu, dev->irq_affinity);
+ if (cpu >= nr_cpu_ids)
+ cpu = cpumask_first(dev->irq_affinity);
+ mask = cpumask_of(cpu);
+ }
+
entry = alloc_msi_entry(&dev->dev);
if (!entry) {
if (!i)
@@ -694,10 +705,14 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
entry->msi_attrib.is_msix = 1;
entry->msi_attrib.is_64 = 1;
- entry->msi_attrib.entry_nr = entries[i].entry;
+ if (entries)
+ entry->msi_attrib.entry_nr = entries[i].entry;
+ else
+ entry->msi_attrib.entry_nr = i;
entry->msi_attrib.default_irq = dev->irq;
entry->mask_base = base;
entry->nvec_used = 1;
+ entry->affinity = mask;
list_add_tail(&entry->list, dev_to_msi_list(&dev->dev));
}
@@ -712,13 +727,11 @@ static void msix_program_entries(struct pci_dev *dev,
int i = 0;
for_each_pci_msi_entry(entry, dev) {
- int offset = entries[i].entry * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL;
-
- entries[i].vector = entry->irq;
- entry->masked = readl(entry->mask_base + offset);
+ if (entries)
+ entries[i++].vector = entry->irq;
+ entry->masked = readl(pci_msix_desc_addr(entry) +
+ PCI_MSIX_ENTRY_VECTOR_CTRL);
msix_mask_irq(entry, 1);
- i++;
}
}
@@ -931,7 +944,7 @@ EXPORT_SYMBOL(pci_msix_vec_count);
/**
* pci_enable_msix - configure device's MSI-X capability structure
* @dev: pointer to the pci_dev data structure of MSI-X device function
- * @entries: pointer to an array of MSI-X entries
+ * @entries: pointer to an array of MSI-X entries (optional)
* @nvec: number of MSI-X irqs requested for allocation by device driver
*
* Setup the MSI-X capability structure of device function with the number
@@ -951,22 +964,21 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
if (!pci_msi_supported(dev, nvec))
return -EINVAL;
- if (!entries)
- return -EINVAL;
-
nr_entries = pci_msix_vec_count(dev);
if (nr_entries < 0)
return nr_entries;
if (nvec > nr_entries)
return nr_entries;
- /* Check for any invalid entries */
- for (i = 0; i < nvec; i++) {
- if (entries[i].entry >= nr_entries)
- return -EINVAL; /* invalid entry */
- for (j = i + 1; j < nvec; j++) {
- if (entries[i].entry == entries[j].entry)
- return -EINVAL; /* duplicate entry */
+ if (entries) {
+ /* Check for any invalid entries */
+ for (i = 0; i < nvec; i++) {
+ if (entries[i].entry >= nr_entries)
+ return -EINVAL; /* invalid entry */
+ for (j = i + 1; j < nvec; j++) {
+ if (entries[i].entry == entries[j].entry)
+ return -EINVAL; /* duplicate entry */
+ }
}
}
WARN_ON(!!dev->msix_enabled);
@@ -1026,19 +1038,8 @@ int pci_msi_enabled(void)
}
EXPORT_SYMBOL(pci_msi_enabled);
-/**
- * pci_enable_msi_range - configure device's MSI capability structure
- * @dev: device to configure
- * @minvec: minimal number of interrupts to configure
- * @maxvec: maximum number of interrupts to configure
- *
- * This function tries to allocate a maximum possible number of interrupts in a
- * range between @minvec and @maxvec. It returns a negative errno if an error
- * occurs. If it succeeds, it returns the actual number of interrupts allocated
- * and updates the @dev's irq member to the lowest new interrupt number;
- * the other interrupt numbers allocated to this device are consecutive.
- **/
-int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
+static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
+ unsigned int flags)
{
int nvec;
int rc;
@@ -1061,25 +1062,85 @@ int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
nvec = pci_msi_vec_count(dev);
if (nvec < 0)
return nvec;
- else if (nvec < minvec)
+ if (nvec < minvec)
return -EINVAL;
- else if (nvec > maxvec)
+
+ if (nvec > maxvec)
nvec = maxvec;
- do {
+ for (;;) {
+ if (!(flags & PCI_IRQ_NOAFFINITY)) {
+ dev->irq_affinity = irq_create_affinity_mask(&nvec);
+ if (nvec < minvec)
+ return -ENOSPC;
+ }
+
rc = msi_capability_init(dev, nvec);
- if (rc < 0) {
+ if (rc == 0)
+ return nvec;
+
+ kfree(dev->irq_affinity);
+ dev->irq_affinity = NULL;
+
+ if (rc < 0)
return rc;
- } else if (rc > 0) {
- if (rc < minvec)
+ if (rc < minvec)
+ return -ENOSPC;
+
+ nvec = rc;
+ }
+}
+
+/**
+ * pci_enable_msi_range - configure device's MSI capability structure
+ * @dev: device to configure
+ * @minvec: minimal number of interrupts to configure
+ * @maxvec: maximum number of interrupts to configure
+ *
+ * This function tries to allocate a maximum possible number of interrupts in a
+ * range between @minvec and @maxvec. It returns a negative errno if an error
+ * occurs. If it succeeds, it returns the actual number of interrupts allocated
+ * and updates the @dev's irq member to the lowest new interrupt number;
+ * the other interrupt numbers allocated to this device are consecutive.
+ **/
+int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
+{
+ return __pci_enable_msi_range(dev, minvec, maxvec, PCI_IRQ_NOAFFINITY);
+}
+EXPORT_SYMBOL(pci_enable_msi_range);
+
+static int __pci_enable_msix_range(struct pci_dev *dev,
+ struct msix_entry *entries, int minvec, int maxvec,
+ unsigned int flags)
+{
+ int nvec = maxvec;
+ int rc;
+
+ if (maxvec < minvec)
+ return -ERANGE;
+
+ for (;;) {
+ if (!(flags & PCI_IRQ_NOAFFINITY)) {
+ dev->irq_affinity = irq_create_affinity_mask(&nvec);
+ if (nvec < minvec)
return -ENOSPC;
- nvec = rc;
}
- } while (rc);
- return nvec;
+ rc = pci_enable_msix(dev, entries, nvec);
+ if (rc == 0)
+ return nvec;
+
+ kfree(dev->irq_affinity);
+ dev->irq_affinity = NULL;
+
+ if (rc < 0)
+ return rc;
+ if (rc < minvec)
+ return -ENOSPC;
+
+ nvec = rc;
+ }
}
-EXPORT_SYMBOL(pci_enable_msi_range);
/**
* pci_enable_msix_range - configure device's MSI-X capability structure
@@ -1097,28 +1158,101 @@ EXPORT_SYMBOL(pci_enable_msi_range);
* with new allocated MSI-X interrupts.
**/
int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
- int minvec, int maxvec)
+ int minvec, int maxvec)
{
- int nvec = maxvec;
- int rc;
+ return __pci_enable_msix_range(dev, entries, minvec, maxvec,
+ PCI_IRQ_NOAFFINITY);
+}
+EXPORT_SYMBOL(pci_enable_msix_range);
- if (maxvec < minvec)
- return -ERANGE;
+/**
+ * pci_alloc_irq_vectors - allocate multiple IRQs for a device
+ * @dev: PCI device to operate on
+ * @min_vecs: minimum number of vectors required (must be >= 1)
+ * @max_vecs: maximum (desired) number of vectors
+ * @flags: flags or quirks for the allocation
+ *
+ * Allocate up to @max_vecs interrupt vectors for @dev, using MSI-X or MSI
+ * vectors if available, and fall back to a single legacy vector
+ * if neither is available. Return the number of vectors allocated,
+ * (which might be smaller than @max_vecs) if successful, or a negative
+ * error code on error. If less than @min_vecs interrupt vectors are
+ * available for @dev the function will fail with -ENOSPC.
+ *
+ * To get the Linux IRQ number used for a vector that can be passed to
+ * request_irq() use the pci_irq_vector() helper.
+ */
+int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
+ unsigned int max_vecs, unsigned int flags)
+{
+ int vecs = -ENOSPC;
- do {
- rc = pci_enable_msix(dev, entries, nvec);
- if (rc < 0) {
- return rc;
- } else if (rc > 0) {
- if (rc < minvec)
- return -ENOSPC;
- nvec = rc;
+ if (!(flags & PCI_IRQ_NOMSIX)) {
+ vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs,
+ flags);
+ if (vecs > 0)
+ return vecs;
+ }
+
+ if (!(flags & PCI_IRQ_NOMSI)) {
+ vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, flags);
+ if (vecs > 0)
+ return vecs;
+ }
+
+ /* use legacy irq if allowed */
+ if (!(flags & PCI_IRQ_NOLEGACY) && min_vecs == 1)
+ return 1;
+ return vecs;
+}
+EXPORT_SYMBOL(pci_alloc_irq_vectors);
+
+/**
+ * pci_free_irq_vectors - free previously allocated IRQs for a device
+ * @dev: PCI device to operate on
+ *
+ * Undoes the allocations and enabling in pci_alloc_irq_vectors().
+ */
+void pci_free_irq_vectors(struct pci_dev *dev)
+{
+ pci_disable_msix(dev);
+ pci_disable_msi(dev);
+}
+EXPORT_SYMBOL(pci_free_irq_vectors);
+
+/**
+ * pci_irq_vector - return Linux IRQ number of a device vector
+ * @dev: PCI device to operate on
+ * @nr: device-relative interrupt vector index (0-based).
+ */
+int pci_irq_vector(struct pci_dev *dev, unsigned int nr)
+{
+ if (dev->msix_enabled) {
+ struct msi_desc *entry;
+ int i = 0;
+
+ for_each_pci_msi_entry(entry, dev) {
+ if (i == nr)
+ return entry->irq;
+ i++;
}
- } while (rc);
+ WARN_ON_ONCE(1);
+ return -EINVAL;
+ }
- return nvec;
+ if (dev->msi_enabled) {
+ struct msi_desc *entry = first_pci_msi_entry(dev);
+
+ if (WARN_ON_ONCE(nr >= entry->nvec_used))
+ return -EINVAL;
+ } else {
+ if (WARN_ON_ONCE(nr > 0))
+ return -EINVAL;
+ }
+
+ return dev->irq + nr;
}
-EXPORT_SYMBOL(pci_enable_msix_range);
+EXPORT_SYMBOL(pci_irq_vector);
struct pci_dev *msi_desc_to_pci_dev(struct msi_desc *desc)
{
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index d7ffd66814bb..e39a67c8ef39 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -777,7 +777,7 @@ static int pci_pm_suspend_noirq(struct device *dev)
if (!pci_dev->state_saved) {
pci_save_state(pci_dev);
- if (!pci_has_subordinate(pci_dev))
+ if (pci_power_manageable(pci_dev))
pci_prepare_to_sleep(pci_dev);
}
@@ -1144,7 +1144,6 @@ static int pci_pm_runtime_suspend(struct device *dev)
return -ENOSYS;
pci_dev->state_saved = false;
- pci_dev->no_d3cold = false;
error = pm->runtime_suspend(dev);
if (error) {
/*
@@ -1161,8 +1160,6 @@ static int pci_pm_runtime_suspend(struct device *dev)
return error;
}
- if (!pci_dev->d3cold_allowed)
- pci_dev->no_d3cold = true;
pci_fixup_device(pci_fixup_suspend, pci_dev);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index d319a9ca9b7b..bcd10c795284 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -406,6 +406,11 @@ static ssize_t d3cold_allowed_store(struct device *dev,
return -EINVAL;
pdev->d3cold_allowed = !!val;
+ if (pdev->d3cold_allowed)
+ pci_d3cold_enable(pdev);
+ else
+ pci_d3cold_disable(pdev);
+
pm_runtime_resume(dev);
return count;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index badbddc683f0..aab9d5115a5f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -7,8 +7,10 @@
* Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
*/
+#include <linux/acpi.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_pci.h>
@@ -25,7 +27,9 @@
#include <linux/device.h>
#include <linux/pm_runtime.h>
#include <linux/pci_hotplug.h>
+#include <linux/vmalloc.h>
#include <asm/setup.h>
+#include <asm/dma.h>
#include <linux/aer.h>
#include "pci.h"
@@ -81,6 +85,9 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
+#define DEFAULT_HOTPLUG_BUS_SIZE 1
+unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE;
+
enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT;
/*
@@ -101,6 +108,21 @@ unsigned int pcibios_max_latency = 255;
/* If set, the PCIe ARI capability will not be used. */
static bool pcie_ari_disabled;
+/* Disable bridge_d3 for all PCIe ports */
+static bool pci_bridge_d3_disable;
+/* Force bridge_d3 for all PCIe ports */
+static bool pci_bridge_d3_force;
+
+static int __init pcie_port_pm_setup(char *str)
+{
+ if (!strcmp(str, "off"))
+ pci_bridge_d3_disable = true;
+ else if (!strcmp(str, "force"))
+ pci_bridge_d3_force = true;
+ return 1;
+}
+__setup("pcie_port_pm=", pcie_port_pm_setup);
+
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
@@ -2156,6 +2178,164 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev)
}
/**
+ * pci_bridge_d3_possible - Is it possible to put the bridge into D3
+ * @bridge: Bridge to check
+ *
+ * This function checks if it is possible to move the bridge to D3.
+ * Currently we only allow D3 for recent enough PCIe ports.
+ */
+static bool pci_bridge_d3_possible(struct pci_dev *bridge)
+{
+ unsigned int year;
+
+ if (!pci_is_pcie(bridge))
+ return false;
+
+ switch (pci_pcie_type(bridge)) {
+ case PCI_EXP_TYPE_ROOT_PORT:
+ case PCI_EXP_TYPE_UPSTREAM:
+ case PCI_EXP_TYPE_DOWNSTREAM:
+ if (pci_bridge_d3_disable)
+ return false;
+ if (pci_bridge_d3_force)
+ return true;
+
+ /*
+ * It should be safe to put PCIe ports from 2015 or newer
+ * to D3.
+ */
+ if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) &&
+ year >= 2015) {
+ return true;
+ }
+ break;
+ }
+
+ return false;
+}
+
+static int pci_dev_check_d3cold(struct pci_dev *dev, void *data)
+{
+ bool *d3cold_ok = data;
+ bool no_d3cold;
+
+ /*
+ * The device needs to be allowed to go D3cold and if it is wake
+ * capable to do so from D3cold.
+ */
+ no_d3cold = dev->no_d3cold || !dev->d3cold_allowed ||
+ (device_may_wakeup(&dev->dev) && !pci_pme_capable(dev, PCI_D3cold)) ||
+ !pci_power_manageable(dev);
+
+ *d3cold_ok = !no_d3cold;
+
+ return no_d3cold;
+}
+
+/*
+ * pci_bridge_d3_update - Update bridge D3 capabilities
+ * @dev: PCI device which is changed
+ * @remove: Is the device being removed
+ *
+ * Update upstream bridge PM capabilities accordingly depending on if the
+ * device PM configuration was changed or the device is being removed. The
+ * change is also propagated upstream.
+ */
+static void pci_bridge_d3_update(struct pci_dev *dev, bool remove)
+{
+ struct pci_dev *bridge;
+ bool d3cold_ok = true;
+
+ bridge = pci_upstream_bridge(dev);
+ if (!bridge || !pci_bridge_d3_possible(bridge))
+ return;
+
+ pci_dev_get(bridge);
+ /*
+ * If the device is removed we do not care about its D3cold
+ * capabilities.
+ */
+ if (!remove)
+ pci_dev_check_d3cold(dev, &d3cold_ok);
+
+ if (d3cold_ok) {
+ /*
+ * We need to go through all children to find out if all of
+ * them can still go to D3cold.
+ */
+ pci_walk_bus(bridge->subordinate, pci_dev_check_d3cold,
+ &d3cold_ok);
+ }
+
+ if (bridge->bridge_d3 != d3cold_ok) {
+ bridge->bridge_d3 = d3cold_ok;
+ /* Propagate change to upstream bridges */
+ pci_bridge_d3_update(bridge, false);
+ }
+
+ pci_dev_put(bridge);
+}
+
+/**
+ * pci_bridge_d3_device_changed - Update bridge D3 capabilities on change
+ * @dev: PCI device that was changed
+ *
+ * If a device is added or its PM configuration, such as is it allowed to
+ * enter D3cold, is changed this function updates upstream bridge PM
+ * capabilities accordingly.
+ */
+void pci_bridge_d3_device_changed(struct pci_dev *dev)
+{
+ pci_bridge_d3_update(dev, false);
+}
+
+/**
+ * pci_bridge_d3_device_removed - Update bridge D3 capabilities on remove
+ * @dev: PCI device being removed
+ *
+ * Function updates upstream bridge PM capabilities based on other devices
+ * still left on the bus.
+ */
+void pci_bridge_d3_device_removed(struct pci_dev *dev)
+{
+ pci_bridge_d3_update(dev, true);
+}
+
+/**
+ * pci_d3cold_enable - Enable D3cold for device
+ * @dev: PCI device to handle
+ *
+ * This function can be used in drivers to enable D3cold from the device
+ * they handle. It also updates upstream PCI bridge PM capabilities
+ * accordingly.
+ */
+void pci_d3cold_enable(struct pci_dev *dev)
+{
+ if (dev->no_d3cold) {
+ dev->no_d3cold = false;
+ pci_bridge_d3_device_changed(dev);
+ }
+}
+EXPORT_SYMBOL_GPL(pci_d3cold_enable);
+
+/**
+ * pci_d3cold_disable - Disable D3cold for device
+ * @dev: PCI device to handle
+ *
+ * This function can be used in drivers to disable D3cold from the device
+ * they handle. It also updates upstream PCI bridge PM capabilities
+ * accordingly.
+ */
+void pci_d3cold_disable(struct pci_dev *dev)
+{
+ if (!dev->no_d3cold) {
+ dev->no_d3cold = true;
+ pci_bridge_d3_device_changed(dev);
+ }
+}
+EXPORT_SYMBOL_GPL(pci_d3cold_disable);
+
+/**
* pci_pm_init - Initialize PM functions of given PCI device
* @dev: PCI device to handle.
*/
@@ -2189,6 +2369,7 @@ void pci_pm_init(struct pci_dev *dev)
dev->pm_cap = pm;
dev->d3_delay = PCI_PM_D3_WAIT;
dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
+ dev->bridge_d3 = pci_bridge_d3_possible(dev);
dev->d3cold_allowed = true;
dev->d1_support = false;
@@ -3165,6 +3346,23 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
#endif
}
+/**
+ * pci_unmap_iospace - Unmap the memory mapped I/O space
+ * @res: resource to be unmapped
+ *
+ * Unmap the CPU virtual address @res from virtual address space.
+ * Only architectures that have memory mapped IO functions defined
+ * (and the PCI_IOBASE value defined) should call this function.
+ */
+void pci_unmap_iospace(struct resource *res)
+{
+#if defined(PCI_IOBASE) && defined(CONFIG_MMU)
+ unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start;
+
+ unmap_kernel_range(vaddr, resource_size(res));
+#endif
+}
+
static void __pci_set_master(struct pci_dev *dev, bool enable)
{
u16 old_cmd, cmd;
@@ -4755,6 +4953,7 @@ static DEFINE_SPINLOCK(resource_alignment_lock);
static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
{
int seg, bus, slot, func, align_order, count;
+ unsigned short vendor, device, subsystem_vendor, subsystem_device;
resource_size_t align = 0;
char *p;
@@ -4768,28 +4967,55 @@ static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
} else {
align_order = -1;
}
- if (sscanf(p, "%x:%x:%x.%x%n",
- &seg, &bus, &slot, &func, &count) != 4) {
- seg = 0;
- if (sscanf(p, "%x:%x.%x%n",
- &bus, &slot, &func, &count) != 3) {
- /* Invalid format */
- printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
- p);
+ if (strncmp(p, "pci:", 4) == 0) {
+ /* PCI vendor/device (subvendor/subdevice) ids are specified */
+ p += 4;
+ if (sscanf(p, "%hx:%hx:%hx:%hx%n",
+ &vendor, &device, &subsystem_vendor, &subsystem_device, &count) != 4) {
+ if (sscanf(p, "%hx:%hx%n", &vendor, &device, &count) != 2) {
+ printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: pci:%s\n",
+ p);
+ break;
+ }
+ subsystem_vendor = subsystem_device = 0;
+ }
+ p += count;
+ if ((!vendor || (vendor == dev->vendor)) &&
+ (!device || (device == dev->device)) &&
+ (!subsystem_vendor || (subsystem_vendor == dev->subsystem_vendor)) &&
+ (!subsystem_device || (subsystem_device == dev->subsystem_device))) {
+ if (align_order == -1)
+ align = PAGE_SIZE;
+ else
+ align = 1 << align_order;
+ /* Found */
break;
}
}
- p += count;
- if (seg == pci_domain_nr(dev->bus) &&
- bus == dev->bus->number &&
- slot == PCI_SLOT(dev->devfn) &&
- func == PCI_FUNC(dev->devfn)) {
- if (align_order == -1)
- align = PAGE_SIZE;
- else
- align = 1 << align_order;
- /* Found */
- break;
+ else {
+ if (sscanf(p, "%x:%x:%x.%x%n",
+ &seg, &bus, &slot, &func, &count) != 4) {
+ seg = 0;
+ if (sscanf(p, "%x:%x.%x%n",
+ &bus, &slot, &func, &count) != 3) {
+ /* Invalid format */
+ printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
+ p);
+ break;
+ }
+ }
+ p += count;
+ if (seg == pci_domain_nr(dev->bus) &&
+ bus == dev->bus->number &&
+ slot == PCI_SLOT(dev->devfn) &&
+ func == PCI_FUNC(dev->devfn)) {
+ if (align_order == -1)
+ align = PAGE_SIZE;
+ else
+ align = 1 << align_order;
+ /* Found */
+ break;
+ }
}
if (*p != ';' && *p != ',') {
/* End of param or invalid format */
@@ -4897,7 +5123,7 @@ static ssize_t pci_resource_alignment_store(struct bus_type *bus,
return pci_set_resource_alignment_param(buf, count);
}
-BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
+static BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
pci_resource_alignment_store);
static int __init pci_resource_alignment_sysfs_init(void)
@@ -4923,7 +5149,7 @@ int pci_get_new_domain_nr(void)
}
#ifdef CONFIG_PCI_DOMAINS_GENERIC
-void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
+static int of_pci_bus_find_domain_nr(struct device *parent)
{
static int use_dt_domains = -1;
int domain = -1;
@@ -4967,7 +5193,13 @@ void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
domain = -1;
}
- bus->domain_nr = domain;
+ return domain;
+}
+
+int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent)
+{
+ return acpi_disabled ? of_pci_bus_find_domain_nr(parent) :
+ acpi_pci_bus_find_domain_nr(bus);
}
#endif
#endif
@@ -5021,6 +5253,11 @@ static int __init pci_setup(char *str)
pci_hotplug_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "hpmemsize=", 10)) {
pci_hotplug_mem_size = memparse(str + 10, &str);
+ } else if (!strncmp(str, "hpbussize=", 10)) {
+ pci_hotplug_bus_size =
+ simple_strtoul(str + 10, &str, 0);
+ if (pci_hotplug_bus_size > 0xff)
+ pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE;
} else if (!strncmp(str, "pcie_bus_tune_off", 17)) {
pcie_bus_config = PCIE_BUS_TUNE_OFF;
} else if (!strncmp(str, "pcie_bus_safe", 13)) {
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a814bbb80fcb..9730c474b016 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -82,6 +82,8 @@ void pci_pm_init(struct pci_dev *dev);
void pci_ea_init(struct pci_dev *dev);
void pci_allocate_cap_save_buffers(struct pci_dev *dev);
void pci_free_cap_save_buffers(struct pci_dev *dev);
+void pci_bridge_d3_device_changed(struct pci_dev *dev);
+void pci_bridge_d3_device_removed(struct pci_dev *dev);
static inline void pci_wakeup_event(struct pci_dev *dev)
{
@@ -94,6 +96,15 @@ static inline bool pci_has_subordinate(struct pci_dev *pci_dev)
return !!(pci_dev->subordinate);
}
+static inline bool pci_power_manageable(struct pci_dev *pci_dev)
+{
+ /*
+ * Currently we allow normal PCI devices and PCI bridges transition
+ * into D3 if their bridge_d3 is set.
+ */
+ return !pci_has_subordinate(pci_dev) || pci_dev->bridge_d3;
+}
+
struct pci_vpd_ops {
ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 22ca6412bd15..7fcea75afa4c 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -83,7 +83,7 @@ config PCIE_PME
depends on PCIEPORTBUS && PM
config PCIE_DPC
- tristate "PCIe Downstream Port Containment support"
+ bool "PCIe Downstream Port Containment support"
depends on PCIEPORTBUS
default n
help
@@ -92,6 +92,3 @@ config PCIE_DPC
will be handled by the DPC driver. If your system doesn't
have this capability or you do not want to use this feature,
it is safe to answer N.
-
- To compile this driver as a module, choose M here: the module
- will be called pcie-dpc.
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 2dfe7fdb77e7..0ec649d961d7 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -139,7 +139,7 @@ static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
{
/* Don't enable Clock PM if the link is not Clock PM capable */
- if (!link->clkpm_capable && enable)
+ if (!link->clkpm_capable)
enable = 0;
/* Need nothing if the specified equals to current state */
if (link->clkpm_enabled == enable)
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index ab552f1bc08f..250f87861786 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -15,8 +15,8 @@
struct dpc_dev {
struct pcie_device *dev;
- struct work_struct work;
- int cap_pos;
+ struct work_struct work;
+ int cap_pos;
};
static void dpc_wait_link_inactive(struct pci_dev *pdev)
@@ -89,7 +89,7 @@ static int dpc_probe(struct pcie_device *dev)
int status;
u16 ctl, cap;
- dpc = kzalloc(sizeof(*dpc), GFP_KERNEL);
+ dpc = devm_kzalloc(&dev->device, sizeof(*dpc), GFP_KERNEL);
if (!dpc)
return -ENOMEM;
@@ -98,11 +98,12 @@ static int dpc_probe(struct pcie_device *dev)
INIT_WORK(&dpc->work, interrupt_event_handler);
set_service_data(dev, dpc);
- status = request_irq(dev->irq, dpc_irq, IRQF_SHARED, "pcie-dpc", dpc);
+ status = devm_request_irq(&dev->device, dev->irq, dpc_irq, IRQF_SHARED,
+ "pcie-dpc", dpc);
if (status) {
dev_warn(&dev->device, "request IRQ%d failed: %d\n", dev->irq,
status);
- goto out;
+ return status;
}
pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
@@ -117,9 +118,6 @@ static int dpc_probe(struct pcie_device *dev)
FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), (cap >> 8) & 0xf,
FLAG(cap, PCI_EXP_DPC_CAP_DL_ACTIVE));
return status;
- out:
- kfree(dpc);
- return status;
}
static void dpc_remove(struct pcie_device *dev)
@@ -131,14 +129,11 @@ static void dpc_remove(struct pcie_device *dev)
pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
ctl &= ~(PCI_EXP_DPC_CTL_EN_NONFATAL | PCI_EXP_DPC_CTL_INT_EN);
pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
-
- free_irq(dev->irq, dpc);
- kfree(dpc);
}
static struct pcie_port_service_driver dpcdriver = {
.name = "dpc",
- .port_type = PCI_EXP_TYPE_ROOT_PORT | PCI_EXP_TYPE_DOWNSTREAM,
+ .port_type = PCIE_ANY_PORT,
.service = PCIE_PORT_SERVICE_DPC,
.probe = dpc_probe,
.remove = dpc_remove,
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 32d4d0a3d20e..e9270b4026f3 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/pcieport_if.h>
@@ -342,6 +343,8 @@ static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
return retval;
}
+ pm_runtime_no_callbacks(device);
+
return 0;
}
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index be35da2e105e..70d7ad8c6d17 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -93,6 +93,26 @@ static int pcie_port_resume_noirq(struct device *dev)
return 0;
}
+static int pcie_port_runtime_suspend(struct device *dev)
+{
+ return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
+}
+
+static int pcie_port_runtime_resume(struct device *dev)
+{
+ return 0;
+}
+
+static int pcie_port_runtime_idle(struct device *dev)
+{
+ /*
+ * Assume the PCI core has set bridge_d3 whenever it thinks the port
+ * should be good to go to D3. Everything else, including moving
+ * the port to D3, is handled by the PCI core.
+ */
+ return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
+}
+
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.suspend = pcie_port_device_suspend,
.resume = pcie_port_device_resume,
@@ -101,6 +121,9 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.poweroff = pcie_port_device_suspend,
.restore = pcie_port_device_resume,
.resume_noirq = pcie_port_resume_noirq,
+ .runtime_suspend = pcie_port_runtime_suspend,
+ .runtime_resume = pcie_port_runtime_resume,
+ .runtime_idle = pcie_port_runtime_idle,
};
#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
@@ -134,16 +157,39 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
return status;
pci_save_state(dev);
+
/*
- * D3cold may not work properly on some PCIe port, so disable
- * it by default.
+ * Prevent runtime PM if the port is advertising support for PCIe
+ * hotplug. Otherwise the BIOS hotplug SMI code might not be able
+ * to enumerate devices behind this port properly (the port is
+ * powered down preventing all config space accesses to the
+ * subordinate devices). We can't be sure for native PCIe hotplug
+ * either so prevent that as well.
*/
- dev->d3cold_allowed = false;
+ if (!dev->is_hotplug_bridge) {
+ /*
+ * Keep the port resumed 100ms to make sure things like
+ * config space accesses from userspace (lspci) will not
+ * cause the port to repeatedly suspend and resume.
+ */
+ pm_runtime_set_autosuspend_delay(&dev->dev, 100);
+ pm_runtime_use_autosuspend(&dev->dev);
+ pm_runtime_mark_last_busy(&dev->dev);
+ pm_runtime_put_autosuspend(&dev->dev);
+ pm_runtime_allow(&dev->dev);
+ }
+
return 0;
}
static void pcie_portdrv_remove(struct pci_dev *dev)
{
+ if (!dev->is_hotplug_bridge) {
+ pm_runtime_forbid(&dev->dev);
+ pm_runtime_get_noresume(&dev->dev);
+ pm_runtime_dont_use_autosuspend(&dev->dev);
+ }
+
pcie_port_device_remove(dev);
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8e3ef720997d..93f280df3428 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -16,6 +16,7 @@
#include <linux/aer.h>
#include <linux/acpi.h>
#include <linux/irqdomain.h>
+#include <linux/pm_runtime.h>
#include "pci.h"
#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
@@ -832,6 +833,12 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
u8 primary, secondary, subordinate;
int broken = 0;
+ /*
+ * Make sure the bridge is powered on to be able to access config
+ * space of devices below it.
+ */
+ pm_runtime_get_sync(&dev->dev);
+
pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
primary = buses & 0xFF;
secondary = (buses >> 8) & 0xFF;
@@ -1012,6 +1019,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
out:
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
+ pm_runtime_put(&dev->dev);
+
return max;
}
EXPORT_SYMBOL(pci_scan_bridge);
@@ -2077,6 +2086,15 @@ unsigned int pci_scan_child_bus(struct pci_bus *bus)
}
/*
+ * Make sure a hotplug bridge has at least the minimum requested
+ * number of buses.
+ */
+ if (bus->self && bus->self->is_hotplug_bridge && pci_hotplug_bus_size) {
+ if (max - bus->busn_res.start < pci_hotplug_bus_size - 1)
+ max = bus->busn_res.start + pci_hotplug_bus_size - 1;
+ }
+
+ /*
* We've scanned the bus and so we know all about what's on
* the other side of any bridges that may be on this bus plus
* any devices.
@@ -2127,7 +2145,9 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
b->sysdata = sysdata;
b->ops = ops;
b->number = b->busn_res.start = bus;
- pci_bus_assign_domain_nr(b, parent);
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+ b->domain_nr = pci_bus_find_domain_nr(b, parent);
+#endif
b2 = pci_find_bus(pci_domain_nr(b), bus);
if (b2) {
/* If we already got to this bus through a different bridge, ignore it */
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 3f155e78513f..2408abe4ee8c 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -231,7 +231,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
{
struct pci_dev *dev = PDE_DATA(file_inode(file));
struct pci_filp_private *fpriv = file->private_data;
- int i, ret;
+ int i, ret, write_combine;
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
@@ -245,9 +245,12 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
+ if (fpriv->mmap_state == pci_mmap_mem)
+ write_combine = fpriv->write_combine;
+ else
+ write_combine = 0;
ret = pci_mmap_page_range(dev, vma,
- fpriv->mmap_state,
- fpriv->write_combine);
+ fpriv->mmap_state, write_combine);
if (ret < 0)
return ret;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ee72ebe18f4b..37ff0158e45f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3189,13 +3189,15 @@ static void quirk_no_bus_reset(struct pci_dev *dev)
}
/*
- * Atheros AR93xx chips do not behave after a bus reset. The device will
- * throw a Link Down error on AER-capable systems and regardless of AER,
- * config space of the device is never accessible again and typically
- * causes the system to hang or reset when access is attempted.
+ * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset.
+ * The device will throw a Link Down error on AER-capable systems and
+ * regardless of AER, config space of the device is never accessible again
+ * and typically causes the system to hang or reset when access is attempted.
* http://www.spinics.net/lists/linux-pci/msg34797.html
*/
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset);
static void quirk_no_pm_reset(struct pci_dev *dev)
{
@@ -3711,6 +3713,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172,
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a,
quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182,
+ quirk_dma_func1_alias);
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
quirk_dma_func1_alias);
@@ -3747,6 +3752,9 @@ static const struct pci_device_id fixed_dma_alias_tbl[] = {
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */
.driver_data = PCI_DEVFN(1, 0) },
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
+ PCI_VENDOR_ID_ADAPTEC2, 0x02bc), /* Adaptec 3805 */
+ .driver_data = PCI_DEVFN(1, 0) },
{ 0 }
};
@@ -4087,6 +4095,7 @@ static const struct pci_dev_acs_enabled {
{ PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs },
{ PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs },
{ PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_SOLARFLARE, 0x0A03, pci_quirk_mf_endpoint_acs },
{ PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs },
{ PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs },
{ PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs },
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 8982026637d5..d1ef7acf6930 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -96,6 +96,8 @@ static void pci_remove_bus_device(struct pci_dev *dev)
dev->subordinate = NULL;
}
+ pci_bridge_d3_device_removed(dev);
+
pci_destroy_dev(dev);
}
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index d678c46e5f03..c74059e10a6d 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1428,6 +1428,74 @@ void pci_bus_assign_resources(const struct pci_bus *bus)
}
EXPORT_SYMBOL(pci_bus_assign_resources);
+static void pci_claim_device_resources(struct pci_dev *dev)
+{
+ int i;
+
+ for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
+ struct resource *r = &dev->resource[i];
+
+ if (!r->flags || r->parent)
+ continue;
+
+ pci_claim_resource(dev, i);
+ }
+}
+
+static void pci_claim_bridge_resources(struct pci_dev *dev)
+{
+ int i;
+
+ for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
+ struct resource *r = &dev->resource[i];
+
+ if (!r->flags || r->parent)
+ continue;
+
+ pci_claim_bridge_resource(dev, i);
+ }
+}
+
+static void pci_bus_allocate_dev_resources(struct pci_bus *b)
+{
+ struct pci_dev *dev;
+ struct pci_bus *child;
+
+ list_for_each_entry(dev, &b->devices, bus_list) {
+ pci_claim_device_resources(dev);
+
+ child = dev->subordinate;
+ if (child)
+ pci_bus_allocate_dev_resources(child);
+ }
+}
+
+static void pci_bus_allocate_resources(struct pci_bus *b)
+{
+ struct pci_bus *child;
+
+ /*
+ * Carry out a depth-first search on the PCI bus
+ * tree to allocate bridge apertures. Read the
+ * programmed bridge bases and recursively claim
+ * the respective bridge resources.
+ */
+ if (b->self) {
+ pci_read_bridge_bases(b);
+ pci_claim_bridge_resources(b->self);
+ }
+
+ list_for_each_entry(child, &b->children, node)
+ pci_bus_allocate_resources(child);
+}
+
+void pci_bus_claim_resources(struct pci_bus *b)
+{
+ pci_bus_allocate_resources(b);
+ pci_bus_allocate_dev_resources(b);
+}
+EXPORT_SYMBOL(pci_bus_claim_resources);
+
static void __pci_bridge_assign_resources(const struct pci_dev *bridge,
struct list_head *add_head,
struct list_head *fail_head)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index adf61b43eb70..734a0428ef0e 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4854,20 +4854,17 @@ static int
lpfc_enable_pci_dev(struct lpfc_hba *phba)
{
struct pci_dev *pdev;
- int bars = 0;
/* Obtain PCI device reference */
if (!phba->pcidev)
goto out_error;
else
pdev = phba->pcidev;
- /* Select PCI BARs */
- bars = pci_select_bars(pdev, IORESOURCE_MEM);
/* Enable PCI device */
if (pci_enable_device_mem(pdev))
goto out_error;
/* Request PCI resource for the device */
- if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
+ if (pci_request_mem_regions(pdev, LPFC_DRIVER_NAME))
goto out_disable_device;
/* Set up device as PCI master and save state for EEH */
pci_set_master(pdev);
@@ -4884,7 +4881,7 @@ out_disable_device:
pci_disable_device(pdev);
out_error:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1401 Failed to enable pci device, bars:x%x\n", bars);
+ "1401 Failed to enable pci device\n");
return -ENODEV;
}
@@ -4899,17 +4896,14 @@ static void
lpfc_disable_pci_dev(struct lpfc_hba *phba)
{
struct pci_dev *pdev;
- int bars;
/* Obtain PCI device reference */
if (!phba->pcidev)
return;
else
pdev = phba->pcidev;
- /* Select PCI BARs */
- bars = pci_select_bars(pdev, IORESOURCE_MEM);
/* Release PCI resource and disable PCI device */
- pci_release_selected_regions(pdev, bars);
+ pci_release_mem_regions(pdev);
pci_disable_device(pdev);
return;
@@ -9811,7 +9805,6 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
struct lpfc_vport **vports;
struct lpfc_hba *phba = vport->phba;
int i;
- int bars = pci_select_bars(pdev, IORESOURCE_MEM);
spin_lock_irq(&phba->hbalock);
vport->load_flag |= FC_UNLOADING;
@@ -9886,7 +9879,7 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
lpfc_hba_free(phba);
- pci_release_selected_regions(pdev, bars);
+ pci_release_mem_regions(pdev);
pci_disable_device(pdev);
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c10972fcc8e4..4fd041bec332 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -387,7 +387,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
* need to have the registers polled during D3, so avoid D3cold.
*/
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
- pdev->no_d3cold = true;
+ pci_d3cold_disable(pdev);
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
xhci_pme_quirk(hcd);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 89ab0572dbc6..7d63a66e8ed4 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -24,6 +24,8 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
}
extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
+extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
+
static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
{
struct pci_bus *pbus = pdev->bus;
diff --git a/drivers/pci/ecam.h b/include/linux/pci-ecam.h
index 9878bebd45bb..7adad206b1f4 100644
--- a/drivers/pci/ecam.h
+++ b/include/linux/pci-ecam.h
@@ -27,8 +27,7 @@ struct pci_config_window;
struct pci_ecam_ops {
unsigned int bus_shift;
struct pci_ops pci_ops;
- int (*init)(struct device *,
- struct pci_config_window *);
+ int (*init)(struct pci_config_window *);
};
/*
@@ -45,6 +44,7 @@ struct pci_config_window {
void __iomem *win; /* 64-bit single mapping */
void __iomem **winp; /* 32-bit per-bus mapping */
};
+ struct device *parent;/* ECAM res was from this dev */
};
/* create and free pci_config_window */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c40ac910cce4..2599a980340f 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -101,6 +101,10 @@ enum {
DEVICE_COUNT_RESOURCE = PCI_NUM_RESOURCES,
};
+/*
+ * pci_power_t values must match the bits in the Capabilities PME_Support
+ * and Control/Status PowerState fields in the Power Management capability.
+ */
typedef int __bitwise pci_power_t;
#define PCI_D0 ((pci_power_t __force) 0)
@@ -116,7 +120,7 @@ extern const char *pci_power_names[];
static inline const char *pci_power_name(pci_power_t state)
{
- return pci_power_names[1 + (int) state];
+ return pci_power_names[1 + (__force int) state];
}
#define PCI_PM_D2_DELAY 200
@@ -294,6 +298,7 @@ struct pci_dev {
unsigned int d2_support:1; /* Low power state D2 is supported */
unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
unsigned int no_d3cold:1; /* D3cold is forbidden */
+ unsigned int bridge_d3:1; /* Allow D3 for bridge */
unsigned int d3cold_allowed:1; /* D3cold is allowed by user */
unsigned int mmio_always_on:1; /* disallow turning off io/mem
decoding during bar sizing */
@@ -320,6 +325,7 @@ struct pci_dev {
* directly, use the values stored here. They might be different!
*/
unsigned int irq;
+ struct cpumask *irq_affinity;
struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
bool match_driver; /* Skip attaching driver */
@@ -1084,6 +1090,8 @@ int pci_back_from_sleep(struct pci_dev *dev);
bool pci_dev_run_wake(struct pci_dev *dev);
bool pci_check_pme_status(struct pci_dev *dev);
void pci_pme_wakeup_bus(struct pci_bus *bus);
+void pci_d3cold_enable(struct pci_dev *dev);
+void pci_d3cold_disable(struct pci_dev *dev);
static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
bool enable)
@@ -1115,6 +1123,7 @@ int pci_set_vpd_size(struct pci_dev *dev, size_t len);
/* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);
void pci_bus_assign_resources(const struct pci_bus *bus);
+void pci_bus_claim_resources(struct pci_bus *bus);
void pci_bus_size_bridges(struct pci_bus *bus);
int pci_claim_resource(struct pci_dev *, int);
int pci_claim_bridge_resource(struct pci_dev *bridge, int i);
@@ -1144,9 +1153,12 @@ void pci_add_resource(struct list_head *resources, struct resource *res);
void pci_add_resource_offset(struct list_head *resources, struct resource *res,
resource_size_t offset);
void pci_free_resource_list(struct list_head *resources);
-void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags);
+void pci_bus_add_resource(struct pci_bus *bus, struct resource *res,
+ unsigned int flags);
struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n);
void pci_bus_remove_resources(struct pci_bus *bus);
+int devm_request_pci_bus_resources(struct device *dev,
+ struct list_head *resources);
#define pci_bus_for_each_resource(bus, res, i) \
for (i = 0; \
@@ -1168,6 +1180,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size);
unsigned long pci_address_to_pio(phys_addr_t addr);
phys_addr_t pci_pio_to_address(unsigned long pio);
int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
+void pci_unmap_iospace(struct resource *res);
static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
{
@@ -1238,6 +1251,11 @@ resource_size_t pcibios_iov_resource_alignment(struct pci_dev *dev, int resno);
int pci_set_vga_state(struct pci_dev *pdev, bool decode,
unsigned int command_bits, u32 flags);
+#define PCI_IRQ_NOLEGACY (1 << 0) /* don't use legacy interrupts */
+#define PCI_IRQ_NOMSI (1 << 1) /* don't use MSI interrupts */
+#define PCI_IRQ_NOMSIX (1 << 2) /* don't use MSI-X interrupts */
+#define PCI_IRQ_NOAFFINITY (1 << 3) /* don't auto-assign affinity */
+
/* kmem_cache style wrapper around pci_alloc_consistent() */
#include <linux/pci-dma.h>
@@ -1285,6 +1303,11 @@ static inline int pci_enable_msix_exact(struct pci_dev *dev,
return rc;
return 0;
}
+int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
+ unsigned int max_vecs, unsigned int flags);
+void pci_free_irq_vectors(struct pci_dev *dev);
+int pci_irq_vector(struct pci_dev *dev, unsigned int nr);
+
#else
static inline int pci_msi_vec_count(struct pci_dev *dev) { return -ENOSYS; }
static inline void pci_msi_shutdown(struct pci_dev *dev) { }
@@ -1308,6 +1331,24 @@ static inline int pci_enable_msix_range(struct pci_dev *dev,
static inline int pci_enable_msix_exact(struct pci_dev *dev,
struct msix_entry *entries, int nvec)
{ return -ENOSYS; }
+static inline int pci_alloc_irq_vectors(struct pci_dev *dev,
+ unsigned int min_vecs, unsigned int max_vecs,
+ unsigned int flags)
+{
+ if (min_vecs > 1)
+ return -EINVAL;
+ return 1;
+}
+static inline void pci_free_irq_vectors(struct pci_dev *dev)
+{
+}
+
+static inline int pci_irq_vector(struct pci_dev *dev, unsigned int nr)
+{
+ if (WARN_ON_ONCE(nr > 0))
+ return -EINVAL;
+ return dev->irq;
+}
#endif
#ifdef CONFIG_PCIEPORTBUS
@@ -1390,12 +1431,13 @@ static inline int pci_domain_nr(struct pci_bus *bus)
{
return bus->domain_nr;
}
-void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent);
+#ifdef CONFIG_ACPI
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus);
#else
-static inline void pci_bus_assign_domain_nr(struct pci_bus *bus,
- struct device *parent)
-{
-}
+static inline int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{ return 0; }
+#endif
+int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent);
#endif
/* some architectures require additional setup to direct VGA traffic */
@@ -1403,6 +1445,34 @@ typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode,
unsigned int command_bits, u32 flags);
void pci_register_set_vga_state(arch_set_vga_state_t func);
+static inline int
+pci_request_io_regions(struct pci_dev *pdev, const char *name)
+{
+ return pci_request_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_IO), name);
+}
+
+static inline void
+pci_release_io_regions(struct pci_dev *pdev)
+{
+ return pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_IO));
+}
+
+static inline int
+pci_request_mem_regions(struct pci_dev *pdev, const char *name)
+{
+ return pci_request_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM), name);
+}
+
+static inline void
+pci_release_mem_regions(struct pci_dev *pdev)
+{
+ return pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+}
+
#else /* CONFIG_PCI is not enabled */
static inline void pci_set_flags(int flags) { }
@@ -1555,7 +1625,11 @@ static inline const char *pci_name(const struct pci_dev *pdev)
/* Some archs don't want to expose struct resource to userland as-is
* in sysfs and /proc
*/
-#ifndef HAVE_ARCH_PCI_RESOURCE_TO_USER
+#ifdef HAVE_ARCH_PCI_RESOURCE_TO_USER
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+ const struct resource *rsrc,
+ resource_size_t *start, resource_size_t *end);
+#else
static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc, resource_size_t *start,
resource_size_t *end)
@@ -1707,6 +1781,7 @@ extern u8 pci_cache_line_size;
extern unsigned long pci_hotplug_io_size;
extern unsigned long pci_hotplug_mem_size;
+extern unsigned long pci_hotplug_bus_size;
/* Architecture-specific versions may override these (weak) */
void pcibios_disable_device(struct pci_dev *dev);
@@ -1723,7 +1798,7 @@ void pcibios_free_irq(struct pci_dev *dev);
extern struct dev_pm_ops pcibios_pm_ops;
#endif
-#ifdef CONFIG_PCI_MMCONFIG
+#if defined(CONFIG_PCI_MMCONFIG) || defined(CONFIG_ACPI_MCFG)
void __init pci_mmcfg_early_init(void);
void __init pci_mmcfg_late_init(void);
#else