diff options
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_ctl.c | 45 | ||||
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_init.c | 1 | ||||
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_sas.h | 4 | ||||
| -rw-r--r-- | drivers/scsi/pm8001/pm80xx_hwi.c | 130 |
4 files changed, 180 insertions, 0 deletions
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c index 7c6be2ec110d..23b8bf27e201 100644 --- a/drivers/scsi/pm8001/pm8001_ctl.c +++ b/drivers/scsi/pm8001/pm8001_ctl.c @@ -554,6 +554,49 @@ static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev, static DEVICE_ATTR(fatal_log, S_IRUGO, pm8001_ctl_fatal_log_show, NULL); +/** + ** non_fatal_log_show - non fatal error logging + ** @cdev:pointer to embedded class device + ** @buf: the buffer returned + ** + ** A sysfs 'read-only' shost attribute. + **/ +static ssize_t non_fatal_log_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + u32 count; + + count = pm80xx_get_non_fatal_dump(cdev, attr, buf); + return count; +} +static DEVICE_ATTR_RO(non_fatal_log); + +static ssize_t non_fatal_count_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); + struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; + + return snprintf(buf, PAGE_SIZE, "%08x", + pm8001_ha->non_fatal_count); +} + +static ssize_t non_fatal_count_store(struct device *cdev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); + struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; + int val = 0; + + if (kstrtoint(buf, 16, &val) != 0) + return -EINVAL; + + pm8001_ha->non_fatal_count = val; + return strlen(buf); +} +static DEVICE_ATTR_RW(non_fatal_count); /** ** pm8001_ctl_gsm_log_show - gsm dump collection @@ -829,6 +872,8 @@ struct device_attribute *pm8001_host_attrs[] = { &dev_attr_aap_log, &dev_attr_iop_log, &dev_attr_fatal_log, + &dev_attr_non_fatal_log, + &dev_attr_non_fatal_count, &dev_attr_gsm_log, &dev_attr_max_out_io, &dev_attr_max_devices, diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 8fa82bf1a454..210448e496a0 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -486,6 +486,7 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, pm8001_ha->shost = shost; pm8001_ha->id = pm8001_id++; pm8001_ha->logging_level = logging_level; + pm8001_ha->non_fatal_count = 0; if (link_rate >= 1 && link_rate <= 15) pm8001_ha->link_rate = (link_rate << 8); else { diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 93438c8f67da..84cb52e82690 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -558,6 +558,8 @@ struct pm8001_hba_info { const struct firmware *fw_image; struct isr_param irq_vector[PM8001_MAX_MSIX_VEC]; u32 reset_in_progress; + u32 non_fatal_count; + u32 non_fatal_read_length; }; struct pm8001_work { @@ -741,6 +743,8 @@ void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha, int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue); ssize_t pm80xx_get_fatal_dump(struct device *cdev, struct device_attribute *attr, char *buf); +ssize_t pm80xx_get_non_fatal_dump(struct device *cdev, + struct device_attribute *attr, char *buf); ssize_t pm8001_get_gsm_dump(struct device *cdev, u32, char *buf); /* ctl shared API */ extern struct device_attribute *pm8001_host_attrs[]; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 9e12510d2d5d..4d205ebaee87 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -393,6 +393,136 @@ moreData: (char *)buf; } +/* pm80xx_get_non_fatal_dump - dump the nonfatal data from the dma + * location by the firmware. + */ +ssize_t pm80xx_get_non_fatal_dump(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); + struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; + void __iomem *nonfatal_table_address = pm8001_ha->fatal_tbl_addr; + u32 accum_len = 0; + u32 total_len = 0; + u32 reg_val = 0; + u32 *temp = NULL; + u32 index = 0; + u32 output_length; + unsigned long start = 0; + char *buf_copy = buf; + + temp = (u32 *)pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr; + if (++pm8001_ha->non_fatal_count == 1) { + if (pm8001_ha->chip_id == chip_8001) { + snprintf(pm8001_ha->forensic_info.data_buf.direct_data, + PAGE_SIZE, "Not supported for SPC controller"); + return 0; + } + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("forensic_info TYPE_NON_FATAL...\n")); + /* + * Step 1: Write the host buffer parameters in the MPI Fatal and + * Non-Fatal Error Dump Capture Table.This is the buffer + * where debug data will be DMAed to. + */ + pm8001_mw32(nonfatal_table_address, + MPI_FATAL_EDUMP_TABLE_LO_OFFSET, + pm8001_ha->memoryMap.region[FORENSIC_MEM].phys_addr_lo); + + pm8001_mw32(nonfatal_table_address, + MPI_FATAL_EDUMP_TABLE_HI_OFFSET, + pm8001_ha->memoryMap.region[FORENSIC_MEM].phys_addr_hi); + + pm8001_mw32(nonfatal_table_address, + MPI_FATAL_EDUMP_TABLE_LENGTH, SYSFS_OFFSET); + + /* Optionally, set the DUMPCTRL bit to 1 if the host + * keeps sending active I/Os while capturing the non-fatal + * debug data. Otherwise, leave this bit set to zero + */ + pm8001_mw32(nonfatal_table_address, + MPI_FATAL_EDUMP_TABLE_HANDSHAKE, MPI_FATAL_EDUMP_HANDSHAKE_RDY); + + /* + * Step 2: Clear Accumulative Length of Debug Data Transferred + * [ACCDDLEN] field in the MPI Fatal and Non-Fatal Error Dump + * Capture Table to zero. + */ + pm8001_mw32(nonfatal_table_address, + MPI_FATAL_EDUMP_TABLE_ACCUM_LEN, 0); + + /* initiallize previous accumulated length to 0 */ + pm8001_ha->forensic_preserved_accumulated_transfer = 0; + pm8001_ha->non_fatal_read_length = 0; + } + + total_len = pm8001_mr32(nonfatal_table_address, + MPI_FATAL_EDUMP_TABLE_TOTAL_LEN); + /* + * Step 3:Clear Fatal/Non-Fatal Debug Data Transfer Status [FDDTSTAT] + * field and then request that the SPCv controller transfer the debug + * data by setting bit 7 of the Inbound Doorbell Set Register. + */ + pm8001_mw32(nonfatal_table_address, MPI_FATAL_EDUMP_TABLE_STATUS, 0); + pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, + SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP); + + /* + * Step 4.1: Read back the Inbound Doorbell Set Register (by polling for + * 2 seconds) until register bit 7 is cleared. + * This step only indicates the request is accepted by the controller. + */ + start = jiffies + (2 * HZ); /* 2 sec */ + do { + reg_val = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET) & + SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP; + } while ((reg_val != 0) && time_before(jiffies, start)); + + /* Step 4.2: To check the completion of the transfer, poll the Fatal/Non + * Fatal Debug Data Transfer Status [FDDTSTAT] field for 2 seconds in + * the MPI Fatal and Non-Fatal Error Dump Capture Table. + */ + start = jiffies + (2 * HZ); /* 2 sec */ + do { + reg_val = pm8001_mr32(nonfatal_table_address, + MPI_FATAL_EDUMP_TABLE_STATUS); + } while ((!reg_val) && time_before(jiffies, start)); + + if ((reg_val == 0x00) || + (reg_val == MPI_FATAL_EDUMP_TABLE_STAT_DMA_FAILED) || + (reg_val > MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE)) { + pm8001_ha->non_fatal_read_length = 0; + buf_copy += snprintf(buf_copy, PAGE_SIZE, "%08x ", 0xFFFFFFFF); + pm8001_ha->non_fatal_count = 0; + return (buf_copy - buf); + } else if (reg_val == + MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_MORE_DATA) { + buf_copy += snprintf(buf_copy, PAGE_SIZE, "%08x ", 2); + } else if ((reg_val == MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE) || + (pm8001_ha->non_fatal_read_length >= total_len)) { + pm8001_ha->non_fatal_read_length = 0; + buf_copy += snprintf(buf_copy, PAGE_SIZE, "%08x ", 4); + pm8001_ha->non_fatal_count = 0; + } + accum_len = pm8001_mr32(nonfatal_table_address, + MPI_FATAL_EDUMP_TABLE_ACCUM_LEN); + output_length = accum_len - + pm8001_ha->forensic_preserved_accumulated_transfer; + + for (index = 0; index < output_length/4; index++) + buf_copy += snprintf(buf_copy, PAGE_SIZE, + "%08x ", *(temp+index)); + + pm8001_ha->non_fatal_read_length += output_length; + + /* store current accumulated length to use in next iteration as + * the previous accumulated length + */ + pm8001_ha->forensic_preserved_accumulated_transfer = accum_len; + return (buf_copy - buf); +} + /** * read_main_config_table - read the configure table and save it. * @pm8001_ha: our hba card information |