summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/ata/libata-core.c2
-rw-r--r--drivers/ide/ide-disk.c2
-rw-r--r--drivers/leds/Kconfig29
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-apu.c28
-rw-r--r--drivers/leds/leds-mlxreg.c281
-rw-r--r--drivers/leds/trigger/ledtrig-disk.c12
-rw-r--r--include/linux/leds.h4
9 files changed, 342 insertions, 18 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 5a9634a0eeb4..65ab509e4a42 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8988,6 +8988,7 @@ M: Vadim Pasternak <vadimp@mellanox.com>
L: linux-leds@vger.kernel.org
S: Supported
F: drivers/leds/leds-mlxcpld.c
+F: drivers/leds/leds-mlxreg.c
F: Documentation/leds/leds-mlxcpld.txt
MELLANOX PLATFORM DRIVER
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 7431ccd03316..728ed4764678 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5240,7 +5240,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
/* Trigger the LED (if available) */
- ledtrig_disk_activity();
+ ledtrig_disk_activity(!!(qc->tf.flags & ATA_TFLAG_WRITE));
/* XXX: New EH and old EH use different mechanisms to
* synchronize EH with regular execution path.
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 188d1b03715d..67bc72d78fbf 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -187,7 +187,7 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
BUG_ON(blk_rq_is_passthrough(rq));
- ledtrig_disk_activity();
+ ledtrig_disk_activity(rq_data_dir(rq) == WRITE);
pr_debug("%s: %sing: block=%llu, sectors=%u\n",
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 3e763d2a0cb3..2c896c0e69e1 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -69,7 +69,7 @@ config LEDS_APU
module will be called leds-apu.
config LEDS_AS3645A
- tristate "AS3645A LED flash controller support"
+ tristate "AS3645A and LM3555 LED flash controllers support"
depends on I2C && LEDS_CLASS_FLASH
depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
help
@@ -521,7 +521,7 @@ config LEDS_MC13783
depends on LEDS_CLASS
depends on MFD_MC13XXX
help
- This option enable support for on-chip LED drivers found
+ This option enables support for on-chip LED drivers found
on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
config LEDS_NS2
@@ -544,7 +544,7 @@ config LEDS_NETXBIG
depends on MACH_KIRKWOOD
default y
help
- This option enable support for LEDs found on the LaCie 2Big
+ This option enables support for LEDs found on the LaCie 2Big
and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
controlled through a GPIO extension bus.
@@ -594,12 +594,12 @@ config LEDS_MAX8997
MAXIM MAX8997 PMIC.
config LEDS_LM355x
- tristate "LED support for LM355x Chips, LM3554 and LM3556"
+ tristate "LED support for LM3554 and LM3556 chips"
depends on LEDS_CLASS && I2C
select REGMAP_I2C
help
- This option enables support for LEDs connected to LM355x.
- LM355x includes Torch, Flash and Indicator functions.
+ This option enables support for LEDs connected to LM3554
+ and LM3556. It includes Torch, Flash and Indicator functions.
config LEDS_OT200
tristate "LED support for the Bachmann OT200"
@@ -674,7 +674,7 @@ config LEDS_SYSCON
depends on MFD_SYSCON
depends on OF
help
- This option enabled support for the LEDs on syscon type
+ This option enables support for the LEDs on syscon type
devices. This will only work with device tree enabled
devices.
@@ -688,11 +688,20 @@ config LEDS_PM8058
config LEDS_MLXCPLD
tristate "LED support for the Mellanox boards"
- depends on X86_64 && DMI
+ depends on X86 && DMI
+ depends on LEDS_CLASS
+ help
+ This option enables support for the LEDs on the Mellanox
+ boards. Say Y to enable these.
+
+config LEDS_MLXREG
+ tristate "LED support for the Mellanox switches management control"
depends on LEDS_CLASS
help
- This option enabled support for the LEDs on the Mellanox
- boards. Say Y to enabled these.
+ This option enables support for the LEDs on the Mellanox Ethernet and
+ InfiniBand switches. The driver can be activated by the platform device
+ device add call. Say Y to enable these. To compile this driver as a
+ module, choose 'M' here: the module will be called leds-mlxreg.
config LEDS_USER
tristate "Userspace LED support"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 987884a5b9a5..91eca81cae82 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o
obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
+obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
diff --git a/drivers/leds/leds-apu.c b/drivers/leds/leds-apu.c
index 74820aab9497..90eeedcbf371 100644
--- a/drivers/leds/leds-apu.c
+++ b/drivers/leds/leds-apu.c
@@ -110,6 +110,7 @@ static const struct dmi_system_id apu_led_dmi_table[] __initconst = {
DMI_MATCH(DMI_PRODUCT_NAME, "APU")
}
},
+ /* PC Engines APU2 with "Legacy" bios < 4.0.8 */
{
.ident = "apu2",
.matches = {
@@ -117,6 +118,22 @@ static const struct dmi_system_id apu_led_dmi_table[] __initconst = {
DMI_MATCH(DMI_BOARD_NAME, "APU2")
}
},
+ /* PC Engines APU2 with "Legacy" bios >= 4.0.8 */
+ {
+ .ident = "apu2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "apu2")
+ }
+ },
+ /* PC Engines APU2 with "Mainline" bios */
+ {
+ .ident = "apu2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2")
+ }
+ },
{}
};
MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table);
@@ -206,12 +223,14 @@ static int __init apu_led_probe(struct platform_device *pdev)
apu_led->pdev = pdev;
- if (dmi_match(DMI_BOARD_NAME, "APU")) {
+ if (dmi_match(DMI_PRODUCT_NAME, "APU")) {
apu_led->profile = apu1_led_profile;
apu_led->platform = APU1_LED_PLATFORM;
apu_led->num_led_instances = ARRAY_SIZE(apu1_led_profile);
apu_led->iosize = APU1_IOSIZE;
- } else if (dmi_match(DMI_BOARD_NAME, "APU2")) {
+ } else if (dmi_match(DMI_BOARD_NAME, "APU2") ||
+ dmi_match(DMI_BOARD_NAME, "apu2") ||
+ dmi_match(DMI_BOARD_NAME, "PC Engines apu2")) {
apu_led->profile = apu2_led_profile;
apu_led->platform = APU2_LED_PLATFORM;
apu_led->num_led_instances = ARRAY_SIZE(apu2_led_profile);
@@ -237,7 +256,10 @@ static int __init apu_led_init(void)
pr_err("No PC Engines board detected\n");
return -ENODEV;
}
- if (!(dmi_match(DMI_PRODUCT_NAME, "APU") || dmi_match(DMI_PRODUCT_NAME, "APU2"))) {
+ if (!(dmi_match(DMI_PRODUCT_NAME, "APU") ||
+ dmi_match(DMI_PRODUCT_NAME, "APU2") ||
+ dmi_match(DMI_PRODUCT_NAME, "apu2") ||
+ dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2"))) {
pr_err("Unknown PC Engines board: %s\n",
dmi_get_system_info(DMI_PRODUCT_NAME));
return -ENODEV;
diff --git a/drivers/leds/leds-mlxreg.c b/drivers/leds/leds-mlxreg.c
new file mode 100644
index 000000000000..1ee48cb21df9
--- /dev/null
+++ b/drivers/leds/leds-mlxreg.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// Copyright (c) 2018 Mellanox Technologies. All rights reserved.
+// Copyright (c) 2018 Vadim Pasternak <vadimp@mellanox.com>
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_data/mlxreg.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* Codes for LEDs. */
+#define MLXREG_LED_OFFSET_BLINK_3HZ 0x01 /* Offset from solid: 3Hz blink */
+#define MLXREG_LED_OFFSET_BLINK_6HZ 0x02 /* Offset from solid: 6Hz blink */
+#define MLXREG_LED_IS_OFF 0x00 /* Off */
+#define MLXREG_LED_RED_SOLID 0x05 /* Solid red */
+#define MLXREG_LED_GREEN_SOLID 0x0D /* Solid green */
+#define MLXREG_LED_AMBER_SOLID 0x09 /* Solid amber */
+#define MLXREG_LED_BLINK_3HZ 167 /* ~167 msec off/on - HW support */
+#define MLXREG_LED_BLINK_6HZ 83 /* ~83 msec off/on - HW support */
+
+/**
+ * struct mlxreg_led_data - led control data:
+ *
+ * @data: led configuration data;
+ * @led_classdev: led class data;
+ * @base_color: base led color (other colors have constant offset from base);
+ * @led_data: led data;
+ * @data_parent: pointer to private device control data of parent;
+ */
+struct mlxreg_led_data {
+ struct mlxreg_core_data *data;
+ struct led_classdev led_cdev;
+ u8 base_color;
+ void *data_parent;
+ char led_cdev_name[MLXREG_CORE_LABEL_MAX_SIZE];
+};
+
+#define cdev_to_priv(c) container_of(c, struct mlxreg_led_data, led_cdev)
+
+/**
+ * struct mlxreg_led_priv_data - platform private data:
+ *
+ * @pdev: platform device;
+ * @pdata: platform data;
+ * @access_lock: mutex for attribute IO access;
+ */
+struct mlxreg_led_priv_data {
+ struct platform_device *pdev;
+ struct mlxreg_core_platform_data *pdata;
+ struct mutex access_lock; /* protect IO operations */
+};
+
+static int
+mlxreg_led_store_hw(struct mlxreg_led_data *led_data, u8 vset)
+{
+ struct mlxreg_led_priv_data *priv = led_data->data_parent;
+ struct mlxreg_core_platform_data *led_pdata = priv->pdata;
+ struct mlxreg_core_data *data = led_data->data;
+ u32 regval;
+ u32 nib;
+ int ret;
+
+ /*
+ * Each LED is controlled through low or high nibble of the relevant
+ * register byte. Register offset is specified by off parameter.
+ * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
+ * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
+ * green.
+ * Parameter mask specifies which nibble is used for specific LED: mask
+ * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
+ * higher nibble (bits from 4 to 7).
+ */
+ mutex_lock(&priv->access_lock);
+
+ ret = regmap_read(led_pdata->regmap, data->reg, &regval);
+ if (ret)
+ goto access_error;
+
+ nib = (ror32(data->mask, data->bit) == 0xf0) ? rol32(vset, data->bit) :
+ rol32(vset, data->bit + 4);
+ regval = (regval & data->mask) | nib;
+
+ ret = regmap_write(led_pdata->regmap, data->reg, regval);
+
+access_error:
+ mutex_unlock(&priv->access_lock);
+
+ return ret;
+}
+
+static enum led_brightness
+mlxreg_led_get_hw(struct mlxreg_led_data *led_data)
+{
+ struct mlxreg_led_priv_data *priv = led_data->data_parent;
+ struct mlxreg_core_platform_data *led_pdata = priv->pdata;
+ struct mlxreg_core_data *data = led_data->data;
+ u32 regval;
+ int err;
+
+ /*
+ * Each LED is controlled through low or high nibble of the relevant
+ * register byte. Register offset is specified by off parameter.
+ * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
+ * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
+ * green.
+ * Parameter mask specifies which nibble is used for specific LED: mask
+ * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
+ * higher nibble (bits from 4 to 7).
+ */
+ err = regmap_read(led_pdata->regmap, data->reg, &regval);
+ if (err < 0) {
+ dev_warn(led_data->led_cdev.dev, "Failed to get current brightness, error: %d\n",
+ err);
+ /* Assume the LED is OFF */
+ return LED_OFF;
+ }
+
+ regval = regval & ~data->mask;
+ regval = (ror32(data->mask, data->bit) == 0xf0) ? ror32(regval,
+ data->bit) : ror32(regval, data->bit + 4);
+ if (regval >= led_data->base_color &&
+ regval <= (led_data->base_color + MLXREG_LED_OFFSET_BLINK_6HZ))
+ return LED_FULL;
+
+ return LED_OFF;
+}
+
+static int
+mlxreg_led_brightness_set(struct led_classdev *cled, enum led_brightness value)
+{
+ struct mlxreg_led_data *led_data = cdev_to_priv(cled);
+
+ if (value)
+ return mlxreg_led_store_hw(led_data, led_data->base_color);
+ else
+ return mlxreg_led_store_hw(led_data, MLXREG_LED_IS_OFF);
+}
+
+static enum led_brightness
+mlxreg_led_brightness_get(struct led_classdev *cled)
+{
+ struct mlxreg_led_data *led_data = cdev_to_priv(cled);
+
+ return mlxreg_led_get_hw(led_data);
+}
+
+static int
+mlxreg_led_blink_set(struct led_classdev *cled, unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct mlxreg_led_data *led_data = cdev_to_priv(cled);
+ int err;
+
+ /*
+ * HW supports two types of blinking: full (6Hz) and half (3Hz).
+ * For delay on/off zero LED is setting to solid color. For others
+ * combination blinking is to be controlled by the software timer.
+ */
+ if (!(*delay_on == 0 && *delay_off == 0) &&
+ !(*delay_on == MLXREG_LED_BLINK_3HZ &&
+ *delay_off == MLXREG_LED_BLINK_3HZ) &&
+ !(*delay_on == MLXREG_LED_BLINK_6HZ &&
+ *delay_off == MLXREG_LED_BLINK_6HZ))
+ return -EINVAL;
+
+ if (*delay_on == MLXREG_LED_BLINK_6HZ)
+ err = mlxreg_led_store_hw(led_data, led_data->base_color +
+ MLXREG_LED_OFFSET_BLINK_6HZ);
+ else if (*delay_on == MLXREG_LED_BLINK_3HZ)
+ err = mlxreg_led_store_hw(led_data, led_data->base_color +
+ MLXREG_LED_OFFSET_BLINK_3HZ);
+ else
+ err = mlxreg_led_store_hw(led_data, led_data->base_color);
+
+ return err;
+}
+
+static int mlxreg_led_config(struct mlxreg_led_priv_data *priv)
+{
+ struct mlxreg_core_platform_data *led_pdata = priv->pdata;
+ struct mlxreg_core_data *data = led_pdata->data;
+ struct mlxreg_led_data *led_data;
+ struct led_classdev *led_cdev;
+ enum led_brightness brightness;
+ int i;
+ int err;
+
+ for (i = 0; i < led_pdata->counter; i++, data++) {
+ led_data = devm_kzalloc(&priv->pdev->dev, sizeof(*led_data),
+ GFP_KERNEL);
+ if (!led_data)
+ return -ENOMEM;
+
+ led_cdev = &led_data->led_cdev;
+ led_data->data_parent = priv;
+ if (strstr(data->label, "red") ||
+ strstr(data->label, "orange")) {
+ brightness = LED_OFF;
+ led_data->base_color = MLXREG_LED_RED_SOLID;
+ } else if (strstr(data->label, "amber")) {
+ brightness = LED_OFF;
+ led_data->base_color = MLXREG_LED_AMBER_SOLID;
+ } else {
+ brightness = LED_OFF;
+ led_data->base_color = MLXREG_LED_GREEN_SOLID;
+ }
+ sprintf(led_data->led_cdev_name, "%s:%s", "mlxreg",
+ data->label);
+ led_cdev->name = led_data->led_cdev_name;
+ led_cdev->brightness = brightness;
+ led_cdev->max_brightness = LED_ON;
+ led_cdev->brightness_set_blocking =
+ mlxreg_led_brightness_set;
+ led_cdev->brightness_get = mlxreg_led_brightness_get;
+ led_cdev->blink_set = mlxreg_led_blink_set;
+ led_cdev->flags = LED_CORE_SUSPENDRESUME;
+ led_data->data = data;
+ err = devm_led_classdev_register(&priv->pdev->dev, led_cdev);
+ if (err)
+ return err;
+
+ if (led_cdev->brightness)
+ mlxreg_led_brightness_set(led_cdev,
+ led_cdev->brightness);
+ dev_info(led_cdev->dev, "label: %s, mask: 0x%02x, offset:0x%02x\n",
+ data->label, data->mask, data->reg);
+ }
+
+ return 0;
+}
+
+static int mlxreg_led_probe(struct platform_device *pdev)
+{
+ struct mlxreg_core_platform_data *led_pdata;
+ struct mlxreg_led_priv_data *priv;
+
+ led_pdata = dev_get_platdata(&pdev->dev);
+ if (!led_pdata) {
+ dev_err(&pdev->dev, "Failed to get platform data.\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ mutex_init(&priv->access_lock);
+ priv->pdev = pdev;
+ priv->pdata = led_pdata;
+
+ return mlxreg_led_config(priv);
+}
+
+static int mlxreg_led_remove(struct platform_device *pdev)
+{
+ struct mlxreg_led_priv_data *priv = dev_get_drvdata(&pdev->dev);
+
+ mutex_destroy(&priv->access_lock);
+
+ return 0;
+}
+
+static struct platform_driver mlxreg_led_driver = {
+ .driver = {
+ .name = "leds-mlxreg",
+ },
+ .probe = mlxreg_led_probe,
+ .remove = mlxreg_led_remove,
+};
+
+module_platform_driver(mlxreg_led_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("Mellanox LED regmap driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:leds-mlxreg");
diff --git a/drivers/leds/trigger/ledtrig-disk.c b/drivers/leds/trigger/ledtrig-disk.c
index cd525b4125eb..9816b0d60270 100644
--- a/drivers/leds/trigger/ledtrig-disk.c
+++ b/drivers/leds/trigger/ledtrig-disk.c
@@ -18,9 +18,11 @@
#define BLINK_DELAY 30
DEFINE_LED_TRIGGER(ledtrig_disk);
+DEFINE_LED_TRIGGER(ledtrig_disk_read);
+DEFINE_LED_TRIGGER(ledtrig_disk_write);
DEFINE_LED_TRIGGER(ledtrig_ide);
-void ledtrig_disk_activity(void)
+void ledtrig_disk_activity(bool write)
{
unsigned long blink_delay = BLINK_DELAY;
@@ -28,12 +30,20 @@ void ledtrig_disk_activity(void)
&blink_delay, &blink_delay, 0);
led_trigger_blink_oneshot(ledtrig_ide,
&blink_delay, &blink_delay, 0);
+ if (write)
+ led_trigger_blink_oneshot(ledtrig_disk_write,
+ &blink_delay, &blink_delay, 0);
+ else
+ led_trigger_blink_oneshot(ledtrig_disk_read,
+ &blink_delay, &blink_delay, 0);
}
EXPORT_SYMBOL(ledtrig_disk_activity);
static int __init ledtrig_disk_init(void)
{
led_trigger_register_simple("disk-activity", &ledtrig_disk);
+ led_trigger_register_simple("disk-read", &ledtrig_disk_read);
+ led_trigger_register_simple("disk-write", &ledtrig_disk_write);
led_trigger_register_simple("ide-disk", &ledtrig_ide);
return 0;
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 5579c64c8fd6..b7e82550e655 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -346,9 +346,9 @@ static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
/* Trigger specific functions */
#ifdef CONFIG_LEDS_TRIGGER_DISK
-extern void ledtrig_disk_activity(void);
+extern void ledtrig_disk_activity(bool write);
#else
-static inline void ledtrig_disk_activity(void) {}
+static inline void ledtrig_disk_activity(bool write) {}
#endif
#ifdef CONFIG_LEDS_TRIGGER_MTD