summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/rapidio/Kconfig14
-rw-r--r--drivers/rapidio/rio.c81
-rw-r--r--include/linux/dmaengine.h12
-rw-r--r--include/linux/rio.h47
-rw-r--r--include/linux/rio_drv.h9
5 files changed, 163 insertions, 0 deletions
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index bc8719238793..6194d35ebb97 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -22,6 +22,20 @@ config RAPIDIO_ENABLE_RX_TX_PORTS
ports for Input/Output direction to allow other traffic
than Maintenance transfers.
+config RAPIDIO_DMA_ENGINE
+ bool "DMA Engine support for RapidIO"
+ depends on RAPIDIO
+ select DMADEVICES
+ select DMA_ENGINE
+ help
+ Say Y here if you want to use DMA Engine frameork for RapidIO data
+ transfers to/from target RIO devices. RapidIO uses NREAD and
+ NWRITE (NWRITE_R, SWRITE) requests to transfer data between local
+ memory and memory on remote target device. You need a DMA controller
+ capable to perform data transfers to/from RapidIO.
+
+ If you are unsure about this, say Y here.
+
config RAPIDIO_DEBUG
bool "RapidIO subsystem debug messages"
depends on RAPIDIO
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 86c9a091a2ff..c40665a4fa33 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -1121,6 +1121,87 @@ int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
return 0;
}
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+static bool rio_chan_filter(struct dma_chan *chan, void *arg)
+{
+ struct rio_dev *rdev = arg;
+
+ /* Check that DMA device belongs to the right MPORT */
+ return (rdev->net->hport ==
+ container_of(chan->device, struct rio_mport, dma));
+}
+
+/**
+ * rio_request_dma - request RapidIO capable DMA channel that supports
+ * specified target RapidIO device.
+ * @rdev: RIO device control structure
+ *
+ * Returns pointer to allocated DMA channel or NULL if failed.
+ */
+struct dma_chan *rio_request_dma(struct rio_dev *rdev)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *dchan;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dchan = dma_request_channel(mask, rio_chan_filter, rdev);
+
+ return dchan;
+}
+EXPORT_SYMBOL_GPL(rio_request_dma);
+
+/**
+ * rio_release_dma - release specified DMA channel
+ * @dchan: DMA channel to release
+ */
+void rio_release_dma(struct dma_chan *dchan)
+{
+ dma_release_channel(dchan);
+}
+EXPORT_SYMBOL_GPL(rio_release_dma);
+
+/**
+ * rio_dma_prep_slave_sg - RapidIO specific wrapper
+ * for device_prep_slave_sg callback defined by DMAENGINE.
+ * @rdev: RIO device control structure
+ * @dchan: DMA channel to configure
+ * @data: RIO specific data descriptor
+ * @direction: DMA data transfer direction (TO or FROM the device)
+ * @flags: dmaengine defined flags
+ *
+ * Initializes RapidIO capable DMA channel for the specified data transfer.
+ * Uses DMA channel private extension to pass information related to remote
+ * target RIO device.
+ * Returns pointer to DMA transaction descriptor or NULL if failed.
+ */
+struct dma_async_tx_descriptor *rio_dma_prep_slave_sg(struct rio_dev *rdev,
+ struct dma_chan *dchan, struct rio_dma_data *data,
+ enum dma_transfer_direction direction, unsigned long flags)
+{
+ struct dma_async_tx_descriptor *txd = NULL;
+ struct rio_dma_ext rio_ext;
+
+ if (dchan->device->device_prep_slave_sg == NULL) {
+ pr_err("%s: prep_rio_sg == NULL\n", __func__);
+ return NULL;
+ }
+
+ rio_ext.destid = rdev->destid;
+ rio_ext.rio_addr_u = data->rio_addr_u;
+ rio_ext.rio_addr = data->rio_addr;
+ rio_ext.wr_type = data->wr_type;
+
+ txd = dmaengine_prep_rio_sg(dchan, data->sg, data->sg_len,
+ direction, flags, &rio_ext);
+
+ return txd;
+}
+EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
+
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
static void rio_fixup_device(struct rio_dev *dev)
{
}
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index d3fec584e8c3..56377df39124 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -635,6 +635,18 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
dir, flags, NULL);
}
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+struct rio_dma_ext;
+static inline struct dma_async_tx_descriptor *dmaengine_prep_rio_sg(
+ struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction dir, unsigned long flags,
+ struct rio_dma_ext *rio_ext)
+{
+ return chan->device->device_prep_slave_sg(chan, sgl, sg_len,
+ dir, flags, rio_ext);
+}
+#endif
+
static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction dir)
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 4d50611112ba..a90ebadd9da0 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -20,6 +20,9 @@
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/rio_regs.h>
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+#include <linux/dmaengine.h>
+#endif
#define RIO_NO_HOPCOUNT -1
#define RIO_INVALID_DESTID 0xffff
@@ -254,6 +257,9 @@ struct rio_mport {
u32 phys_efptr;
unsigned char name[40];
void *priv; /* Master port private data */
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ struct dma_device dma;
+#endif
};
/**
@@ -395,6 +401,47 @@ union rio_pw_msg {
u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)];
};
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+/**
+ * enum rio_write_type - RIO write transaction types used in DMA transfers
+ *
+ * Note: RapidIO specification defines write (NWRITE) and
+ * write-with-response (NWRITE_R) data transfer operations.
+ * Existing DMA controllers that service RapidIO may use one of these operations
+ * for entire data transfer or their combination with only the last data packet
+ * requires response.
+ */
+enum rio_write_type {
+ RDW_DEFAULT, /* default method used by DMA driver */
+ RDW_ALL_NWRITE, /* all packets use NWRITE */
+ RDW_ALL_NWRITE_R, /* all packets use NWRITE_R */
+ RDW_LAST_NWRITE_R, /* last packet uses NWRITE_R, others - NWRITE */
+};
+
+struct rio_dma_ext {
+ u16 destid;
+ u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */
+ u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */
+ enum rio_write_type wr_type; /* preferred RIO write operation type */
+};
+
+struct rio_dma_data {
+ /* Local data (as scatterlist) */
+ struct scatterlist *sg; /* I/O scatter list */
+ unsigned int sg_len; /* size of scatter list */
+ /* Remote device address (flat buffer) */
+ u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */
+ u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */
+ enum rio_write_type wr_type; /* preferred RIO write operation type */
+};
+
+static inline struct rio_mport *dma_to_mport(struct dma_device *ddev)
+{
+ return container_of(ddev, struct rio_mport, dma);
+}
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
/* Architecture and hardware-specific functions */
extern int rio_register_mport(struct rio_mport *);
extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index 7f07470e1ed9..31ad146be316 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -377,6 +377,15 @@ void rio_unregister_driver(struct rio_driver *);
struct rio_dev *rio_dev_get(struct rio_dev *);
void rio_dev_put(struct rio_dev *);
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+extern struct dma_chan *rio_request_dma(struct rio_dev *rdev);
+extern void rio_release_dma(struct dma_chan *dchan);
+extern struct dma_async_tx_descriptor *rio_dma_prep_slave_sg(
+ struct rio_dev *rdev, struct dma_chan *dchan,
+ struct rio_dma_data *data,
+ enum dma_transfer_direction direction, unsigned long flags);
+#endif
+
/**
* rio_name - Get the unique RIO device identifier
* @rdev: RIO device