summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt4
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-platform.txt1
-rw-r--r--Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt37
-rw-r--r--Documentation/devicetree/bindings/bus/ti-sysc.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5440-clock.txt28
-rw-r--r--Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt28
-rw-r--r--Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt52
-rw-r--r--Documentation/devicetree/bindings/reset/uniphier-reset.txt56
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/pwrap.txt1
-rw-r--r--Documentation/devicetree/bindings/sram/sunxi-sram.txt31
-rw-r--r--Documentation/hwmon/raspberrypi-hwmon22
-rw-r--r--Documentation/networking/dpaa2/dpio-driver.rst (renamed from drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt)29
-rw-r--r--Documentation/networking/dpaa2/index.rst1
-rw-r--r--MAINTAINERS2
-rw-r--r--drivers/ata/ahci_platform.c1
-rw-r--r--drivers/bus/Kconfig10
-rw-r--r--drivers/bus/Makefile1
-rw-r--r--drivers/bus/sun50i-de2.c48
-rw-r--r--drivers/bus/ti-sysc.c64
-rw-r--r--drivers/clk/samsung/Makefile1
-rw-r--r--drivers/clk/samsung/clk-exynos5440.c167
-rw-r--r--drivers/clk/ti/clk-7xx.c1
-rw-r--r--drivers/cpufreq/Kconfig.arm14
-rw-r--r--drivers/cpufreq/Makefile1
-rw-r--r--drivers/cpufreq/exynos5440-cpufreq.c452
-rw-r--r--drivers/crypto/caam/sg_sw_qm2.h2
-rw-r--r--drivers/crypto/caam/sg_sw_sec4.h2
-rw-r--r--drivers/firmware/arm_scmi/perf.c5
-rw-r--r--drivers/firmware/psci_checker.c83
-rw-r--r--drivers/firmware/raspberrypi.c29
-rw-r--r--drivers/hwmon/Kconfig10
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/raspberrypi-hwmon.c166
-rw-r--r--drivers/memory/tegra/mc.c16
-rw-r--r--drivers/memory/ti-emif-pm.c33
-rw-r--r--drivers/reset/Kconfig19
-rw-r--r--drivers/reset/Makefile2
-rw-r--r--drivers/reset/reset-qcom-aoss.c133
-rw-r--r--drivers/reset/reset-simple.c1
-rw-r--r--drivers/reset/reset-uniphier-usb3.c171
-rw-r--r--drivers/reset/reset-uniphier.c9
-rw-r--r--drivers/soc/bcm/brcmstb/pm/pm-arm.c16
-rw-r--r--drivers/soc/fsl/Kconfig15
-rw-r--r--drivers/soc/fsl/Makefile1
-rw-r--r--drivers/soc/fsl/dpio/Makefile (renamed from drivers/staging/fsl-mc/bus/dpio/Makefile)0
-rw-r--r--drivers/soc/fsl/dpio/dpio-cmd.h (renamed from drivers/staging/fsl-mc/bus/dpio/dpio-cmd.h)0
-rw-r--r--drivers/soc/fsl/dpio/dpio-driver.c (renamed from drivers/staging/fsl-mc/bus/dpio/dpio-driver.c)2
-rw-r--r--drivers/soc/fsl/dpio/dpio-service.c (renamed from drivers/staging/fsl-mc/bus/dpio/dpio-service.c)2
-rw-r--r--drivers/soc/fsl/dpio/dpio.c (renamed from drivers/staging/fsl-mc/bus/dpio/dpio.c)0
-rw-r--r--drivers/soc/fsl/dpio/dpio.h (renamed from drivers/staging/fsl-mc/bus/dpio/dpio.h)0
-rw-r--r--drivers/soc/fsl/dpio/qbman-portal.c (renamed from drivers/staging/fsl-mc/bus/dpio/qbman-portal.c)2
-rw-r--r--drivers/soc/fsl/dpio/qbman-portal.h (renamed from drivers/staging/fsl-mc/bus/dpio/qbman-portal.h)2
-rw-r--r--drivers/soc/fsl/qbman/Kconfig2
-rw-r--r--drivers/soc/fsl/qe/Kconfig2
-rw-r--r--drivers/soc/fsl/qe/gpio.c28
-rw-r--r--drivers/soc/imx/gpc.c18
-rw-r--r--drivers/soc/mediatek/mtk-pmic-wrap.c81
-rw-r--r--drivers/soc/sunxi/sunxi_sram.c87
-rw-r--r--drivers/soc/ti/wkup_m3_ipc.c76
-rw-r--r--drivers/staging/Kconfig2
-rw-r--r--drivers/staging/Makefile1
-rw-r--r--drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c4
-rw-r--r--drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h22
-rw-r--r--drivers/staging/fsl-mc/Kconfig2
-rw-r--r--drivers/staging/fsl-mc/Makefile3
-rw-r--r--drivers/staging/fsl-mc/bus/Kconfig16
-rw-r--r--drivers/staging/fsl-mc/bus/Makefile9
-rw-r--r--drivers/tee/optee/Kconfig8
-rw-r--r--drivers/tee/optee/core.c2
-rw-r--r--drivers/tee/optee/rpc.c2
-rw-r--r--drivers/usb/host/ehci-exynos.c7
-rw-r--r--drivers/usb/host/ohci-exynos.c6
-rw-r--r--include/dt-bindings/bus/ti-sysc.h2
-rw-r--r--include/dt-bindings/clock/dra7.h1
-rw-r--r--include/dt-bindings/clock/exynos5440.h44
-rw-r--r--include/dt-bindings/reset/qcom,sdm845-aoss.h17
-rw-r--r--include/linux/platform_data/ti-sysc.h1
-rw-r--r--include/linux/wkup_m3_ipc.h9
-rw-r--r--include/soc/bcm2835/raspberrypi-firmware.h1
-rw-r--r--include/soc/fsl/dpaa2-fd.h (renamed from drivers/staging/fsl-mc/include/dpaa2-fd.h)12
-rw-r--r--include/soc/fsl/dpaa2-global.h (renamed from drivers/staging/fsl-mc/include/dpaa2-global.h)0
-rw-r--r--include/soc/fsl/dpaa2-io.h (renamed from drivers/staging/fsl-mc/include/dpaa2-io.h)0
82 files changed, 1360 insertions, 880 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index c052caad36e8..104cc9b41df4 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -189,7 +189,11 @@ Power-Down (SRPD), among other things.
Required properties:
- compatible : should contain one of these
+ "brcm,brcmstb-memc-ddr-rev-b.2.1"
"brcm,brcmstb-memc-ddr-rev-b.2.2"
+ "brcm,brcmstb-memc-ddr-rev-b.2.3"
+ "brcm,brcmstb-memc-ddr-rev-b.3.0"
+ "brcm,brcmstb-memc-ddr-rev-b.3.1"
"brcm,brcmstb-memc-ddr"
- reg : the MEMC DDR register range
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index c760ecb81381..663766685818 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -17,7 +17,6 @@ Required properties:
- "marvell,armada-380-ahci"
- "marvell,armada-3700-ahci"
- "snps,dwc-ahci"
- - "snps,exynos5440-ahci"
- "snps,spear-ahci"
- "generic-ahci"
- interrupts : <interrupt mapping for SATA IRQ>
diff --git a/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt
new file mode 100644
index 000000000000..87dfb33fb3be
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt
@@ -0,0 +1,37 @@
+Device tree bindings for Allwinner A64 DE2 bus
+
+The Allwinner A64 DE2 is on a special bus, which needs a SRAM region (SRAM C)
+to be claimed for enabling the access.
+
+Required properties:
+
+ - compatible: Should contain "allwinner,sun50i-a64-de2"
+ - reg: A resource specifier for the register space
+ - #address-cells: Must be set to 1
+ - #size-cells: Must be set to 1
+ - ranges: Must be set up to map the address space inside the
+ DE2, for the sub-blocks of DE2.
+ - allwinner,sram: the SRAM that needs to be claimed
+
+Example:
+
+ de2@1000000 {
+ compatible = "allwinner,sun50i-a64-de2";
+ reg = <0x1000000 0x400000>;
+ allwinner,sram = <&de2_sram 1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000000 0x400000>;
+
+ display_clocks: clock@0 {
+ compatible = "allwinner,sun50i-a64-de2-clk";
+ reg = <0x0 0x100000>;
+ clocks = <&ccu CLK_DE>,
+ <&ccu CLK_BUS_DE>;
+ clock-names = "mod",
+ "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
index d8ed5b780ed9..91dc2333af01 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
@@ -36,6 +36,7 @@ Required standard properties:
"ti,sysc-omap-aes"
"ti,sysc-mcasp"
"ti,sysc-usb-host-fs"
+ "ti,sysc-dra7-mcan"
- reg shall have register areas implemented for the interconnect
target module in question such as revision, sysc and syss
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
deleted file mode 100644
index c7d227c31e95..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Samsung Exynos5440 Clock Controller
-
-The Exynos5440 clock controller generates and supplies clock to various
-controllers within the Exynos5440 SoC.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos5440-clock".
-
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5440.h header and can be used in device
-tree sources.
-
-Example: An example of a clock controller node is listed below.
-
- clock: clock-controller@10010000 {
- compatible = "samsung,exynos5440-clock";
- reg = <0x160000 0x10000>;
- #clock-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt
deleted file mode 100644
index caff1a57436f..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-
-Exynos5440 cpufreq driver
--------------------
-
-Exynos5440 SoC cpufreq driver for CPU frequency scaling.
-
-Required properties:
-- interrupts: Interrupt to know the completion of cpu frequency change.
-- operating-points: Table of frequencies and voltage CPU could be transitioned into,
- in the decreasing order. Frequency should be in KHz units and voltage
- should be in microvolts.
-
-Optional properties:
-- clock-latency: Clock monitor latency in microsecond.
-
-All the required listed above must be defined under node cpufreq.
-
-Example:
---------
- cpufreq@160000 {
- compatible = "samsung,exynos5440-cpufreq";
- reg = <0x160000 0x1000>;
- interrupts = <0 57 0>;
- operating-points = <
- 1000000 975000
- 800000 925000>;
- clock-latency = <100000>;
- };
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
new file mode 100644
index 000000000000..510c748656ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
@@ -0,0 +1,52 @@
+Qualcomm AOSS Reset Controller
+======================================
+
+This binding describes a reset-controller found on AOSS-CC (always on subsystem)
+for Qualcomm SDM845 SoCs.
+
+Required properties:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be:
+ "qcom,sdm845-aoss-cc"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must specify the base address and size of the register
+ space.
+
+- #reset-cells:
+ Usage: required
+ Value type: <uint>
+ Definition: must be 1; cell entry represents the reset index.
+
+Example:
+
+aoss_reset: reset-controller@c2a0000 {
+ compatible = "qcom,sdm845-aoss-cc";
+ reg = <0xc2a0000 0x31000>;
+ #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/qcom,sdm845-aoss.h>
+
+Example:
+
+modem-pil@4080000 {
+ ...
+
+ resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ ...
+};
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 93efed629900..101743dda223 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -118,3 +118,59 @@ Example:
other nodes ...
};
+
+
+USB3 core reset
+---------------
+
+USB3 core reset belongs to USB3 glue layer. Before using the core reset,
+it is necessary to control the clocks and resets to enable this layer.
+These clocks and resets should be described in each property.
+
+Required properties:
+- compatible: Should be
+ "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC
+ "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC
+ "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC
+- #reset-cells: Should be 1.
+- reg: Specifies offset and length of the register set for the device.
+- clocks: A list of phandles to the clock gate for USB3 glue layer.
+ According to the clock-names, appropriate clocks are required.
+- clock-names: Should contain
+ "gio", "link" - for Pro4 SoC
+ "link" - for others
+- resets: A list of phandles to the reset control for USB3 glue layer.
+ According to the reset-names, appropriate resets are required.
+- reset-names: Should contain
+ "gio", "link" - for Pro4 SoC
+ "link" - for others
+
+Example:
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_rst: reset@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ regulator {
+ ...
+ };
+
+ phy {
+ ...
+ };
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index bf80e3f96f8c..f9987c30f0d5 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -19,6 +19,7 @@ IP Pairing
Required properties in pwrap device node.
- compatible:
"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
+ "mediatek,mt6797-pwrap" for MT6797 SoCs
"mediatek,mt7622-pwrap" for MT7622 SoCs
"mediatek,mt8135-pwrap" for MT8135 SoCs
"mediatek,mt8173-pwrap" for MT8173 SoCs
diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
index d087f04a4d7f..c51ade86578c 100644
--- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt
+++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
@@ -10,8 +10,14 @@ Controller Node
Required properties:
- compatible : should be:
- - "allwinner,sun4i-a10-sram-controller"
- - "allwinner,sun50i-a64-sram-controller"
+ - "allwinner,sun4i-a10-sram-controller" (deprecated)
+ - "allwinner,sun4i-a10-system-control"
+ - "allwinner,sun5i-a13-system-control"
+ - "allwinner,sun7i-a20-system-control", "allwinner,sun4i-a10-system-control"
+ - "allwinner,sun8i-a23-system-control"
+ - "allwinner,sun8i-h3-system-control"
+ - "allwinner,sun50i-a64-sram-controller" (deprecated)
+ - "allwinner,sun50i-a64-system-control"
- reg : sram controller register offset + length
SRAM nodes
@@ -26,8 +32,25 @@ once again the representation described in the mmio-sram binding.
The valid sections compatible for A10 are:
- allwinner,sun4i-a10-sram-a3-a4
+ - allwinner,sun4i-a10-sram-c1
- allwinner,sun4i-a10-sram-d
+The valid sections compatible for A13 are:
+ - allwinner,sun5i-a13-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4
+ - allwinner,sun5i-a13-sram-c1, allwinner,sun4i-a10-sram-c1
+ - allwinner,sun5i-a13-sram-d, allwinner,sun4i-a10-sram-d
+
+The valid sections compatible for A20 are:
+ - allwinner,sun7i-a20-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4
+ - allwinner,sun7i-a20-sram-c1, allwinner,sun4i-a10-sram-c1
+ - allwinner,sun7i-a20-sram-d, allwinner,sun4i-a10-sram-d
+
+The valid sections compatible for A23/A33 are:
+ - allwinner,sun8i-a23-sram-c1, allwinner,sun4i-a10-sram-c1
+
+The valid sections compatible for H3 are:
+ - allwinner,sun8i-h3-sram-c1, allwinner,sun4i-a10-sram-c1
+
The valid sections compatible for A64 are:
- allwinner,sun50i-a64-sram-c
@@ -47,8 +70,8 @@ This valid values for this argument are:
Example
-------
-sram-controller@1c00000 {
- compatible = "allwinner,sun4i-a10-sram-controller";
+system-control@1c00000 {
+ compatible = "allwinner,sun4i-a10-system-control";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/hwmon/raspberrypi-hwmon b/Documentation/hwmon/raspberrypi-hwmon
new file mode 100644
index 000000000000..3c92e2cb52d6
--- /dev/null
+++ b/Documentation/hwmon/raspberrypi-hwmon
@@ -0,0 +1,22 @@
+Kernel driver raspberrypi-hwmon
+===============================
+
+Supported boards:
+ * Raspberry Pi A+ (via GPIO on SoC)
+ * Raspberry Pi B+ (via GPIO on SoC)
+ * Raspberry Pi 2 B (via GPIO on SoC)
+ * Raspberry Pi 3 B (via GPIO on port expander)
+ * Raspberry Pi 3 B+ (via PMIC)
+
+Author: Stefan Wahren <stefan.wahren@i2se.com>
+
+Description
+-----------
+
+This driver periodically polls a mailbox property of the VC4 firmware to detect
+undervoltage conditions.
+
+Sysfs entries
+-------------
+
+in0_lcrit_alarm Undervoltage alarm
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt b/Documentation/networking/dpaa2/dpio-driver.rst
index 72ba9da3d179..13588104161b 100644
--- a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt
+++ b/Documentation/networking/dpaa2/dpio-driver.rst
@@ -1,7 +1,15 @@
-Copyright 2016 NXP
+.. include:: <isonum.txt>
+
+DPAA2 DPIO (Data Path I/O) Overview
+===================================
+
+:Copyright: |copy| 2016-2018 NXP
+
+This document provides an overview of the Freescale DPAA2 DPIO
+drivers
Introduction
-------------
+============
A DPAA2 DPIO (Data Path I/O) is a hardware object that provides
interfaces to enqueue and dequeue frames to/from network interfaces
@@ -27,8 +35,11 @@ provides services that:
The Linux DPIO driver consists of 3 primary components--
DPIO object driver-- fsl-mc driver that manages the DPIO object
+
DPIO service-- provides APIs to other Linux drivers for services
+
QBman portal interface-- sends portal commands, gets responses
+::
fsl-mc other
bus drivers
@@ -45,8 +56,9 @@ The Linux DPIO driver consists of 3 primary components--
|
hardware
+
The diagram below shows how the DPIO driver components fit with the other
-DPAA2 Linux driver components:
+DPAA2 Linux driver components::
+------------+
| OS Network |
| Stack |
@@ -98,20 +110,29 @@ DPIO service (dpio-service.c, dpaa2-io.h)
Notification handling
dpaa2_io_service_register()
+
dpaa2_io_service_deregister()
+
dpaa2_io_service_rearm()
Queuing
dpaa2_io_service_pull_fq()
+
dpaa2_io_service_pull_channel()
+
dpaa2_io_service_enqueue_fq()
+
dpaa2_io_service_enqueue_qd()
+
dpaa2_io_store_create()
+
dpaa2_io_store_destroy()
+
dpaa2_io_store_next()
Buffer pool management
dpaa2_io_service_release()
+
dpaa2_io_service_acquire()
QBman portal interface (qbman-portal.c)
@@ -120,7 +141,9 @@ QBman portal interface (qbman-portal.c)
The qbman-portal component provides APIs to do the low level hardware
bit twiddling for operations such as:
-initializing Qman software portals
+
-building and sending portal commands
+
-portal interrupt configuration and processing
The qbman-portal APIs are not public to other drivers, and are
diff --git a/Documentation/networking/dpaa2/index.rst b/Documentation/networking/dpaa2/index.rst
index 4c6586c87969..10bea113a7bc 100644
--- a/Documentation/networking/dpaa2/index.rst
+++ b/Documentation/networking/dpaa2/index.rst
@@ -6,3 +6,4 @@ DPAA2 Documentation
:maxdepth: 1
overview
+ dpio-driver
diff --git a/MAINTAINERS b/MAINTAINERS
index a48d24d50753..126335e0471f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4512,7 +4512,7 @@ DPAA2 DATAPATH I/O (DPIO) DRIVER
M: Roy Pledge <Roy.Pledge@nxp.com>
L: linux-kernel@vger.kernel.org
S: Maintained
-F: drivers/staging/fsl-mc/bus/dpio
+F: drivers/soc/fsl/dpio
DPAA2 ETHERNET DRIVER
M: Ioana Radulescu <ruxandra.radulescu@nxp.com>
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 99f9a895a459..564570ea3e27 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -75,7 +75,6 @@ static const struct of_device_id ahci_of_match[] = {
{ .compatible = "generic-ahci", },
/* Keep the following compatibles for device tree compatibility */
{ .compatible = "snps,spear-ahci", },
- { .compatible = "snps,exynos5440-ahci", },
{ .compatible = "ibm,476gtr-ahci", },
{ .compatible = "snps,dwc-ahci", },
{ .compatible = "hisilicon,hisi-ahci", },
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index d1c0b60e9326..1851112ccc29 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -103,6 +103,16 @@ config SIMPLE_PM_BUS
Controller (BSC, sometimes called "LBSC within Bus Bridge", or
"External Bus Interface") as found on several Renesas ARM SoCs.
+config SUN50I_DE2_BUS
+ bool "Allwinner A64 DE2 Bus Driver"
+ default ARM64
+ depends on ARCH_SUNXI
+ select SUNXI_SRAM
+ help
+ Say y here to enable support for Allwinner A64 DE2 bus driver. It's
+ mostly transparent, but a SRAM region needs to be claimed in the SRAM
+ controller to make the all blocks in the DE2 part accessible.
+
config SUNXI_RSB
tristate "Allwinner sunXi Reduced Serial Bus Driver"
default MACH_SUN8I || MACH_SUN9I || ARM64
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index b8f036cca7ff..ca300b1914ce 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o
+obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o
obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
diff --git a/drivers/bus/sun50i-de2.c b/drivers/bus/sun50i-de2.c
new file mode 100644
index 000000000000..672518741f86
--- /dev/null
+++ b/drivers/bus/sun50i-de2.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner A64 Display Engine 2.0 Bus Driver
+ *
+ * Copyright (C) 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/sunxi/sunxi_sram.h>
+
+static int sun50i_de2_bus_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ ret = sunxi_sram_claim(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Error couldn't map SRAM to device\n");
+ return ret;
+ }
+
+ of_platform_populate(np, NULL, NULL, &pdev->dev);
+
+ return 0;
+}
+
+static int sun50i_de2_bus_remove(struct platform_device *pdev)
+{
+ sunxi_sram_release(&pdev->dev);
+ return 0;
+}
+
+static const struct of_device_id sun50i_de2_bus_of_match[] = {
+ { .compatible = "allwinner,sun50i-a64-de2", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sun50i_de2_bus_driver = {
+ .probe = sun50i_de2_bus_probe,
+ .remove = sun50i_de2_bus_remove,
+ .driver = {
+ .name = "sun50i-de2-bus",
+ .of_match_table = sun50i_de2_bus_of_match,
+ },
+};
+
+builtin_platform_driver(sun50i_de2_bus_driver);
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 80d60f43db56..c9bac9dc4637 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -23,11 +23,14 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
+#include <linux/iopoll.h>
#include <linux/platform_data/ti-sysc.h>
#include <dt-bindings/bus/ti-sysc.h>
+#define MAX_MODULE_SOFTRESET_WAIT 10000
+
static const char * const reg_names[] = { "rev", "sysc", "syss", };
enum sysc_clocks {
@@ -88,6 +91,11 @@ struct sysc {
struct delayed_work idle_work;
};
+void sysc_write(struct sysc *ddata, int offset, u32 value)
+{
+ writel_relaxed(value, ddata->module_va + offset);
+}
+
static u32 sysc_read(struct sysc *ddata, int offset)
{
if (ddata->cfg.quirks & SYSC_QUIRK_16BIT) {
@@ -943,6 +951,36 @@ static void sysc_init_revision_quirks(struct sysc *ddata)
}
}
+static int sysc_reset(struct sysc *ddata)
+{
+ int offset = ddata->offsets[SYSC_SYSCONFIG];
+ int val;
+
+ if (ddata->legacy_mode || offset < 0 ||
+ ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)
+ return 0;
+
+ /*
+ * Currently only support reset status in sysstatus.
+ * Warn and return error in all other cases
+ */
+ if (!ddata->cfg.syss_mask) {
+ dev_err(ddata->dev, "No ti,syss-mask. Reset failed\n");
+ return -EINVAL;
+ }
+
+ val = sysc_read(ddata, offset);
+ val |= (0x1 << ddata->cap->regbits->srst_shift);
+ sysc_write(ddata, offset, val);
+
+ /* Poll on reset status */
+ offset = ddata->offsets[SYSC_SYSSTATUS];
+
+ return readl_poll_timeout(ddata->module_va + offset, val,
+ (val & ddata->cfg.syss_mask) == 0x0,
+ 100, MAX_MODULE_SOFTRESET_WAIT);
+}
+
/* At this point the module is configured enough to read the revision */
static int sysc_init_module(struct sysc *ddata)
{
@@ -960,6 +998,14 @@ static int sysc_init_module(struct sysc *ddata)
return 0;
}
+ error = sysc_reset(ddata);
+ if (error) {
+ dev_err(ddata->dev, "Reset failed with %d\n", error);
+ pm_runtime_put_sync(ddata->dev);
+
+ return error;
+ }
+
ddata->revision = sysc_read_revision(ddata);
pm_runtime_put_sync(ddata->dev);
@@ -1552,6 +1598,23 @@ static const struct sysc_capabilities sysc_omap4_usb_host_fs = {
.regbits = &sysc_regbits_omap4_usb_host_fs,
};
+static const struct sysc_regbits sysc_regbits_dra7_mcan = {
+ .dmadisable_shift = -ENODEV,
+ .midle_shift = -ENODEV,
+ .sidle_shift = -ENODEV,
+ .clkact_shift = -ENODEV,
+ .enwkup_shift = 4,
+ .srst_shift = 0,
+ .emufree_shift = -ENODEV,
+ .autoidle_shift = -ENODEV,
+};
+
+static const struct sysc_capabilities sysc_dra7_mcan = {
+ .type = TI_SYSC_DRA7_MCAN,
+ .sysc_mask = SYSC_DRA7_MCAN_ENAWAKEUP | SYSC_OMAP4_SOFTRESET,
+ .regbits = &sysc_regbits_dra7_mcan,
+};
+
static int sysc_init_pdata(struct sysc *ddata)
{
struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev);
@@ -1743,6 +1806,7 @@ static const struct of_device_id sysc_match[] = {
{ .compatible = "ti,sysc-mcasp", .data = &sysc_omap4_mcasp, },
{ .compatible = "ti,sysc-usb-host-fs",
.data = &sysc_omap4_usb_host_fs, },
+ { .compatible = "ti,sysc-dra7-mcan", .data = &sysc_dra7_mcan, },
{ },
};
MODULE_DEVICE_TABLE(of, sysc_match);
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 513826393158..1a4e6b787978 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_SOC_EXYNOS5410) += clk-exynos5410.o
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5-subcmu.o
obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos5433.o
-obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-clkout.o
obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos7.o
diff --git a/drivers/clk/samsung/clk-exynos5440.c b/drivers/clk/samsung/clk-exynos5440.c
deleted file mode 100644
index b08bd54c5e76..000000000000
--- a/drivers/clk/samsung/clk-exynos5440.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Thomas Abraham <thomas.ab@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Common Clock Framework support for Exynos5440 SoC.
-*/
-
-#include <dt-bindings/clock/exynos5440.h>
-#include <linux/clk-provider.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-
-#include "clk.h"
-#include "clk-pll.h"
-
-#define CLKEN_OV_VAL 0xf8
-#define CPU_CLK_STATUS 0xfc
-#define MISC_DOUT1 0x558
-
-static void __iomem *reg_base;
-
-/* parent clock name list */
-PNAME(mout_armclk_p) = { "cplla", "cpllb" };
-PNAME(mout_spi_p) = { "div125", "div200" };
-
-/* fixed rate clocks generated outside the soc */
-static struct samsung_fixed_rate_clock exynos5440_fixed_rate_ext_clks[] __initdata = {
- FRATE(0, "xtal", NULL, 0, 0),
-};
-
-/* fixed rate clocks */
-static const struct samsung_fixed_rate_clock exynos5440_fixed_rate_clks[] __initconst = {
- FRATE(0, "ppll", NULL, 0, 1000000000),
- FRATE(0, "usb_phy0", NULL, 0, 60000000),
- FRATE(0, "usb_phy1", NULL, 0, 60000000),
- FRATE(0, "usb_ohci12", NULL, 0, 12000000),
- FRATE(0, "usb_ohci48", NULL, 0, 48000000),
-};
-
-/* fixed factor clocks */
-static const struct samsung_fixed_factor_clock exynos5440_fixed_factor_clks[] __initconst = {
- FFACTOR(0, "div250", "ppll", 1, 4, 0),
- FFACTOR(0, "div200", "ppll", 1, 5, 0),
- FFACTOR(0, "div125", "div250", 1, 2, 0),
-};
-
-/* mux clocks */
-static const struct samsung_mux_clock exynos5440_mux_clks[] __initconst = {
- MUX(0, "mout_spi", mout_spi_p, MISC_DOUT1, 5, 1),
- MUX(CLK_ARM_CLK, "arm_clk", mout_armclk_p, CPU_CLK_STATUS, 0, 1),
-};
-
-/* divider clocks */
-static const struct samsung_div_clock exynos5440_div_clks[] __initconst = {
- DIV(CLK_SPI_BAUD, "div_spi", "mout_spi", MISC_DOUT1, 3, 2),
-};
-
-/* gate clocks */
-static const struct samsung_gate_clock exynos5440_gate_clks[] __initconst = {
- GATE(CLK_PB0_250, "pb0_250", "div250", CLKEN_OV_VAL, 3, 0, 0),
- GATE(CLK_PR0_250, "pr0_250", "div250", CLKEN_OV_VAL, 4, 0, 0),
- GATE(CLK_PR1_250, "pr1_250", "div250", CLKEN_OV_VAL, 5, 0, 0),
- GATE(CLK_B_250, "b_250", "div250", CLKEN_OV_VAL, 9, 0, 0),
- GATE(CLK_B_125, "b_125", "div125", CLKEN_OV_VAL, 10, 0, 0),
- GATE(CLK_B_200, "b_200", "div200", CLKEN_OV_VAL, 11, 0, 0),
- GATE(CLK_SATA, "sata", "div200", CLKEN_OV_VAL, 12, 0, 0),
- GATE(CLK_USB, "usb", "div200", CLKEN_OV_VAL, 13, 0, 0),
- GATE(CLK_GMAC0, "gmac0", "div200", CLKEN_OV_VAL, 14, 0, 0),
- GATE(CLK_CS250, "cs250", "div250", CLKEN_OV_VAL, 19, 0, 0),
- GATE(CLK_PB0_250_O, "pb0_250_o", "pb0_250", CLKEN_OV_VAL, 3, 0, 0),
- GATE(CLK_PR0_250_O, "pr0_250_o", "pr0_250", CLKEN_OV_VAL, 4, 0, 0),
- GATE(CLK_PR1_250_O, "pr1_250_o", "pr1_250", CLKEN_OV_VAL, 5, 0, 0),
- GATE(CLK_B_250_O, "b_250_o", "b_250", CLKEN_OV_VAL, 9, 0, 0),
- GATE(CLK_B_125_O, "b_125_o", "b_125", CLKEN_OV_VAL, 10, 0, 0),
- GATE(CLK_B_200_O, "b_200_o", "b_200", CLKEN_OV_VAL, 11, 0, 0),
- GATE(CLK_SATA_O, "sata_o", "sata", CLKEN_OV_VAL, 12, 0, 0),
- GATE(CLK_USB_O, "usb_o", "usb", CLKEN_OV_VAL, 13, 0, 0),
- GATE(CLK_GMAC0_O, "gmac0_o", "gmac", CLKEN_OV_VAL, 14, 0, 0),
- GATE(CLK_CS250_O, "cs250_o", "cs250", CLKEN_OV_VAL, 19, 0, 0),
-};
-
-static const struct of_device_id ext_clk_match[] __initconst = {
- { .compatible = "samsung,clock-xtal", .data = (void *)0, },
- {},
-};
-
-static int exynos5440_clk_restart_notify(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- u32 val, status;
-
- status = readl_relaxed(reg_base + 0xbc);
- val = readl_relaxed(reg_base + 0xcc);
- val = (val & 0xffff0000) | (status & 0xffff);
- writel_relaxed(val, reg_base + 0xcc);
-
- return NOTIFY_DONE;
-}
-
-/*
- * Exynos5440 Clock restart notifier, handles restart functionality
- */
-static struct notifier_block exynos5440_clk_restart_handler = {
- .notifier_call = exynos5440_clk_restart_notify,
- .priority = 128,
-};
-
-static const struct samsung_pll_clock exynos5440_plls[] __initconst = {
- PLL(pll_2550x, CLK_CPLLA, "cplla", "xtal", 0, 0x4c, NULL),
- PLL(pll_2550x, CLK_CPLLB, "cpllb", "xtal", 0, 0x50, NULL),
-};
-
-/*
- * Clock aliases for legacy clkdev look-up.
- */
-static const struct samsung_clock_alias exynos5440_aliases[] __initconst = {
- ALIAS(CLK_ARM_CLK, NULL, "armclk"),
-};
-
-/* register exynos5440 clocks */
-static void __init exynos5440_clk_init(struct device_node *np)
-{
- struct samsung_clk_provider *ctx;
-
- reg_base = of_iomap(np, 0);
- if (!reg_base) {
- pr_err("%s: failed to map clock controller registers,"
- " aborting clock initialization\n", __func__);
- return;
- }
-
- ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
-
- samsung_clk_of_register_fixed_ext(ctx, exynos5440_fixed_rate_ext_clks,
- ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
-
- samsung_clk_register_pll(ctx, exynos5440_plls,
- ARRAY_SIZE(exynos5440_plls), ctx->reg_base);
-
- samsung_clk_register_fixed_rate(ctx, exynos5440_fixed_rate_clks,
- ARRAY_SIZE(exynos5440_fixed_rate_clks));
- samsung_clk_register_fixed_factor(ctx, exynos5440_fixed_factor_clks,
- ARRAY_SIZE(exynos5440_fixed_factor_clks));
- samsung_clk_register_mux(ctx, exynos5440_mux_clks,
- ARRAY_SIZE(exynos5440_mux_clks));
- samsung_clk_register_div(ctx, exynos5440_div_clks,
- ARRAY_SIZE(exynos5440_div_clks));
- samsung_clk_register_gate(ctx, exynos5440_gate_clks,
- ARRAY_SIZE(exynos5440_gate_clks));
- samsung_clk_register_alias(ctx, exynos5440_aliases,
- ARRAY_SIZE(exynos5440_aliases));
-
- samsung_clk_of_add_provider(np, ctx);
-
- if (register_restart_handler(&exynos5440_clk_restart_handler))
- pr_warn("exynos5440 clock can't register restart handler\n");
-
- pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("arm_clk"));
- pr_info("exynos5440 clock initialization complete\n");
-}
-CLK_OF_DECLARE(exynos5440_clk, "samsung,exynos5440-clock", exynos5440_clk_init);
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index fb249a1637a5..71a122b2dc67 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -708,6 +708,7 @@ static const struct omap_clkctrl_reg_data dra7_wkupaon_clkctrl_regs[] __initcons
{ DRA7_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
{ DRA7_UART10_CLKCTRL, dra7_uart10_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0060:24" },
{ DRA7_DCAN1_CLKCTRL, dra7_dcan1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0068:24" },
+ { DRA7_ADC_CLKCTRL, NULL, CLKF_SW_SUP, "mcan_clk"},
{ 0 },
};
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 52f5f1a2040c..0cd8eb76ad59 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -71,20 +71,6 @@ config ARM_BRCMSTB_AVS_CPUFREQ
Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
-config ARM_EXYNOS5440_CPUFREQ
- tristate "SAMSUNG EXYNOS5440"
- depends on SOC_EXYNOS5440
- depends on HAVE_CLK && OF
- select PM_OPP
- default y
- help
- This adds the CPUFreq driver for Samsung EXYNOS5440
- SoC. The nature of exynos5440 clock controller is
- different than previous exynos controllers so not using
- the common exynos framework.
-
- If in doubt, say N.
-
config ARM_HIGHBANK_CPUFREQ
tristate "Calxeda Highbank-based"
depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index fb4a2ecac43b..c1ffeabe4ecf 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o
obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
-obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
deleted file mode 100644
index 932caa386ece..000000000000
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Amit Daniel Kachhap <amit.daniel@samsung.com>
- *
- * EXYNOS5440 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/clk.h>
-#include <linux/cpu.h>
-#include <linux/cpufreq.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/pm_opp.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/* Register definitions */
-#define XMU_DVFS_CTRL 0x0060
-#define XMU_PMU_P0_7 0x0064
-#define XMU_C0_3_PSTATE 0x0090
-#define XMU_P_LIMIT 0x00a0
-#define XMU_P_STATUS 0x00a4
-#define XMU_PMUEVTEN 0x00d0
-#define XMU_PMUIRQEN 0x00d4
-#define XMU_PMUIRQ 0x00d8
-
-/* PMU mask and shift definations */
-#define P_VALUE_MASK 0x7
-
-#define XMU_DVFS_CTRL_EN_SHIFT 0
-
-#define P0_7_CPUCLKDEV_SHIFT 21
-#define P0_7_CPUCLKDEV_MASK 0x7
-#define P0_7_ATBCLKDEV_SHIFT 18
-#define P0_7_ATBCLKDEV_MASK 0x7
-#define P0_7_CSCLKDEV_SHIFT 15
-#define P0_7_CSCLKDEV_MASK 0x7
-#define P0_7_CPUEMA_SHIFT 28
-#define P0_7_CPUEMA_MASK 0xf
-#define P0_7_L2EMA_SHIFT 24
-#define P0_7_L2EMA_MASK 0xf
-#define P0_7_VDD_SHIFT 8
-#define P0_7_VDD_MASK 0x7f
-#define P0_7_FREQ_SHIFT 0
-#define P0_7_FREQ_MASK 0xff
-
-#define C0_3_PSTATE_VALID_SHIFT 8
-#define C0_3_PSTATE_CURR_SHIFT 4
-#define C0_3_PSTATE_NEW_SHIFT 0
-
-#define PSTATE_CHANGED_EVTEN_SHIFT 0
-
-#define PSTATE_CHANGED_IRQEN_SHIFT 0
-
-#define PSTATE_CHANGED_SHIFT 0
-
-/* some constant values for clock divider calculation */
-#define CPU_DIV_FREQ_MAX 500
-#define CPU_DBG_FREQ_MAX 375
-#define CPU_ATB_FREQ_MAX 500
-
-#define PMIC_LOW_VOLT 0x30
-#define PMIC_HIGH_VOLT 0x28
-
-#define CPUEMA_HIGH 0x2
-#define CPUEMA_MID 0x4
-#define CPUEMA_LOW 0x7
-
-#define L2EMA_HIGH 0x1
-#define L2EMA_MID 0x3
-#define L2EMA_LOW 0x4
-
-#define DIV_TAB_MAX 2
-/* frequency unit is 20MHZ */
-#define FREQ_UNIT 20
-#define MAX_VOLTAGE 1550000 /* In microvolt */
-#define VOLTAGE_STEP 12500 /* In microvolt */
-
-#define CPUFREQ_NAME "exynos5440_dvfs"
-#define DEF_TRANS_LATENCY 100000
-
-enum cpufreq_level_index {
- L0, L1, L2, L3, L4,
- L5, L6, L7, L8, L9,
-};
-#define CPUFREQ_LEVEL_END (L7 + 1)
-
-struct exynos_dvfs_data {
- void __iomem *base;
- struct resource *mem;
- int irq;
- struct clk *cpu_clk;
- unsigned int latency;
- struct cpufreq_frequency_table *freq_table;
- unsigned int freq_count;
- struct device *dev;
- bool dvfs_enabled;
- struct work_struct irq_work;
-};
-
-static struct exynos_dvfs_data *dvfs_info;
-static DEFINE_MUTEX(cpufreq_lock);
-static struct cpufreq_freqs freqs;
-
-static int init_div_table(void)
-{
- struct cpufreq_frequency_table *pos, *freq_tbl = dvfs_info->freq_table;
- unsigned int tmp, clk_div, ema_div, freq, volt_id, idx;
- struct dev_pm_opp *opp;
-
- cpufreq_for_each_entry_idx(pos, freq_tbl, idx) {
- opp = dev_pm_opp_find_freq_exact(dvfs_info->dev,
- pos->frequency * 1000, true);
- if (IS_ERR(opp)) {
- dev_err(dvfs_info->dev,
- "failed to find valid OPP for %u KHZ\n",
- pos->frequency);
- return PTR_ERR(opp);
- }
-
- freq = pos->frequency / 1000; /* In MHZ */
- clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK)
- << P0_7_CPUCLKDEV_SHIFT;
- clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK)
- << P0_7_ATBCLKDEV_SHIFT;
- clk_div |= ((freq / CPU_DBG_FREQ_MAX) & P0_7_CSCLKDEV_MASK)
- << P0_7_CSCLKDEV_SHIFT;
-
- /* Calculate EMA */
- volt_id = dev_pm_opp_get_voltage(opp);
-
- volt_id = (MAX_VOLTAGE - volt_id) / VOLTAGE_STEP;
- if (volt_id < PMIC_HIGH_VOLT) {
- ema_div = (CPUEMA_HIGH << P0_7_CPUEMA_SHIFT) |
- (L2EMA_HIGH << P0_7_L2EMA_SHIFT);
- } else if (volt_id > PMIC_LOW_VOLT) {
- ema_div = (CPUEMA_LOW << P0_7_CPUEMA_SHIFT) |
- (L2EMA_LOW << P0_7_L2EMA_SHIFT);
- } else {
- ema_div = (CPUEMA_MID << P0_7_CPUEMA_SHIFT) |
- (L2EMA_MID << P0_7_L2EMA_SHIFT);
- }
-
- tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT)
- | ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT));
-
- __raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 * idx);
- dev_pm_opp_put(opp);
- }
-
- return 0;
-}
-
-static void exynos_enable_dvfs(unsigned int cur_frequency)
-{
- unsigned int tmp, cpu;
- struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
- struct cpufreq_frequency_table *pos;
- /* Disable DVFS */
- __raw_writel(0, dvfs_info->base + XMU_DVFS_CTRL);
-
- /* Enable PSTATE Change Event */
- tmp = __raw_readl(dvfs_info->base + XMU_PMUEVTEN);
- tmp |= (1 << PSTATE_CHANGED_EVTEN_SHIFT);
- __raw_writel(tmp, dvfs_info->base + XMU_PMUEVTEN);
-
- /* Enable PSTATE Change IRQ */
- tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQEN);
- tmp |= (1 << PSTATE_CHANGED_IRQEN_SHIFT);
- __raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN);
-
- /* Set initial performance index */
- cpufreq_for_each_entry(pos, freq_table)
- if (pos->frequency == cur_frequency)
- break;
-
- if (pos->frequency == CPUFREQ_TABLE_END) {
- dev_crit(dvfs_info->dev, "Boot up frequency not supported\n");
- /* Assign the highest frequency */
- pos = freq_table;
- cur_frequency = pos->frequency;
- }
-
- dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ",
- cur_frequency);
-
- for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) {
- tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
- tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
- tmp |= ((pos - freq_table) << C0_3_PSTATE_NEW_SHIFT);
- __raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
- }
-
- /* Enable DVFS */
- __raw_writel(1 << XMU_DVFS_CTRL_EN_SHIFT,
- dvfs_info->base + XMU_DVFS_CTRL);
-}
-
-static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
-{
- unsigned int tmp;
- int i;
- struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
-
- mutex_lock(&cpufreq_lock);
-
- freqs.old = policy->cur;
- freqs.new = freq_table[index].frequency;
-
- cpufreq_freq_transition_begin(policy, &freqs);
-
- /* Set the target frequency in all C0_3_PSTATE register */
- for_each_cpu(i, policy->cpus) {
- tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + i * 4);
- tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
- tmp |= (index << C0_3_PSTATE_NEW_SHIFT);
-
- __raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + i * 4);
- }
- mutex_unlock(&cpufreq_lock);
- return 0;
-}
-
-static void exynos_cpufreq_work(struct work_struct *work)
-{
- unsigned int cur_pstate, index;
- struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
- struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
-
- /* Ensure we can access cpufreq structures */
- if (unlikely(dvfs_info->dvfs_enabled == false))
- goto skip_work;
-
- mutex_lock(&cpufreq_lock);
- freqs.old = policy->cur;
-
- cur_pstate = __raw_readl(dvfs_info->base + XMU_P_STATUS);
- if (cur_pstate >> C0_3_PSTATE_VALID_SHIFT & 0x1)
- index = (cur_pstate >> C0_3_PSTATE_CURR_SHIFT) & P_VALUE_MASK;
- else
- index = (cur_pstate >> C0_3_PSTATE_NEW_SHIFT) & P_VALUE_MASK;
-
- if (likely(index < dvfs_info->freq_count)) {
- freqs.new = freq_table[index].frequency;
- } else {
- dev_crit(dvfs_info->dev, "New frequency out of range\n");
- freqs.new = freqs.old;
- }
- cpufreq_freq_transition_end(policy, &freqs, 0);
-
- cpufreq_cpu_put(policy);
- mutex_unlock(&cpufreq_lock);
-skip_work:
- enable_irq(dvfs_info->irq);
-}
-
-static irqreturn_t exynos_cpufreq_irq(int irq, void *id)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQ);
- if (tmp >> PSTATE_CHANGED_SHIFT & 0x1) {
- __raw_writel(tmp, dvfs_info->base + XMU_PMUIRQ);
- disable_irq_nosync(irq);
- schedule_work(&dvfs_info->irq_work);
- }
- return IRQ_HANDLED;
-}
-
-static void exynos_sort_descend_freq_table(void)
-{
- struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;
- int i = 0, index;
- unsigned int tmp_freq;
- /*
- * Exynos5440 clock controller state logic expects the cpufreq table to
- * be in descending order. But the OPP library constructs the table in
- * ascending order. So to make the table descending we just need to
- * swap the i element with the N - i element.
- */
- for (i = 0; i < dvfs_info->freq_count / 2; i++) {
- index = dvfs_info->freq_count - i - 1;
- tmp_freq = freq_tbl[i].frequency;
- freq_tbl[i].frequency = freq_tbl[index].frequency;
- freq_tbl[index].frequency = tmp_freq;
- }
-}
-
-static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- policy->clk = dvfs_info->cpu_clk;
- return cpufreq_generic_init(policy, dvfs_info->freq_table,
- dvfs_info->latency);
-}
-
-static struct cpufreq_driver exynos_driver = {
- .flags = CPUFREQ_STICKY | CPUFREQ_ASYNC_NOTIFICATION |
- CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = exynos_target,
- .get = cpufreq_generic_get,
- .init = exynos_cpufreq_cpu_init,
- .name = CPUFREQ_NAME,
- .attr = cpufreq_generic_attr,
-};
-
-static const struct of_device_id exynos_cpufreq_match[] = {
- {
- .compatible = "samsung,exynos5440-cpufreq",
- },
- {},
-};
-MODULE_DEVICE_TABLE(of, exynos_cpufreq_match);
-
-static int exynos_cpufreq_probe(struct platform_device *pdev)
-{
- int ret = -EINVAL;
- struct device_node *np;
- struct resource res;
- unsigned int cur_frequency;
-
- np = pdev->dev.of_node;
- if (!np)
- return -ENODEV;
-
- dvfs_info = devm_kzalloc(&pdev->dev, sizeof(*dvfs_info), GFP_KERNEL);
- if (!dvfs_info) {
- ret = -ENOMEM;
- goto err_put_node;
- }
-
- dvfs_info->dev = &pdev->dev;
-
- ret = of_address_to_resource(np, 0, &res);
- if (ret)
- goto err_put_node;
-
- dvfs_info->base = devm_ioremap_resource(dvfs_info->dev, &res);
- if (IS_ERR(dvfs_info->base)) {
- ret = PTR_ERR(dvfs_info->base);
- goto err_put_node;
- }
-
- dvfs_info->irq = irq_of_parse_and_map(np, 0);
- if (!dvfs_info->irq) {
- dev_err(dvfs_info->dev, "No cpufreq irq found\n");
- ret = -ENODEV;
- goto err_put_node;
- }
-
- ret = dev_pm_opp_of_add_table(dvfs_info->dev);
- if (ret) {
- dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret);
- goto err_put_node;
- }
-
- ret = dev_pm_opp_init_cpufreq_table(dvfs_info->dev,
- &dvfs_info->freq_table);
- if (ret) {
- dev_err(dvfs_info->dev,
- "failed to init cpufreq table: %d\n", ret);
- goto err_free_opp;
- }
- dvfs_info->freq_count = dev_pm_opp_get_opp_count(dvfs_info->dev);
- exynos_sort_descend_freq_table();
-
- if (of_property_read_u32(np, "clock-latency", &dvfs_info->latency))
- dvfs_info->latency = DEF_TRANS_LATENCY;
-
- dvfs_info->cpu_clk = devm_clk_get(dvfs_info->dev, "armclk");
- if (IS_ERR(dvfs_info->cpu_clk)) {
- dev_err(dvfs_info->dev, "Failed to get cpu clock\n");
- ret = PTR_ERR(dvfs_info->cpu_clk);
- goto err_free_table;
- }
-
- cur_frequency = clk_get_rate(dvfs_info->cpu_clk);
- if (!cur_frequency) {
- dev_err(dvfs_info->dev, "Failed to get clock rate\n");
- ret = -EINVAL;
- goto err_free_table;
- }
- cur_frequency /= 1000;
-
- INIT_WORK(&dvfs_info->irq_work, exynos_cpufreq_work);
- ret = devm_request_irq(dvfs_info->dev, dvfs_info->irq,
- exynos_cpufreq_irq, IRQF_TRIGGER_NONE,
- CPUFREQ_NAME, dvfs_info);
- if (ret) {
- dev_err(dvfs_info->dev, "Failed to register IRQ\n");
- goto err_free_table;
- }
-
- ret = init_div_table();
- if (ret) {
- dev_err(dvfs_info->dev, "Failed to initialise div table\n");
- goto err_free_table;
- }
-
- exynos_enable_dvfs(cur_frequency);
- ret = cpufreq_register_driver(&exynos_driver);
- if (ret) {
- dev_err(dvfs_info->dev,
- "%s: failed to register cpufreq driver\n", __func__);
- goto err_free_table;
- }
-
- of_node_put(np);
- dvfs_info->dvfs_enabled = true;
- return 0;
-
-err_free_table:
- dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
-err_free_opp:
- dev_pm_opp_of_remove_table(dvfs_info->dev);
-err_put_node:
- of_node_put(np);
- dev_err(&pdev->dev, "%s: failed initialization\n", __func__);
- return ret;
-}
-
-static int exynos_cpufreq_remove(struct platform_device *pdev)
-{
- cpufreq_unregister_driver(&exynos_driver);
- dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
- dev_pm_opp_of_remove_table(dvfs_info->dev);
- return 0;
-}
-
-static struct platform_driver exynos_cpufreq_platdrv = {
- .driver = {
- .name = "exynos5440-cpufreq",
- .of_match_table = exynos_cpufreq_match,
- },
- .probe = exynos_cpufreq_probe,
- .remove = exynos_cpufreq_remove,
-};
-module_platform_driver(exynos_cpufreq_platdrv);
-
-MODULE_AUTHOR("Amit Daniel Kachhap <amit.daniel@samsung.com>");
-MODULE_DESCRIPTION("Exynos5440 cpufreq driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/crypto/caam/sg_sw_qm2.h b/drivers/crypto/caam/sg_sw_qm2.h
index 31b440757146..b5b4c12179df 100644
--- a/drivers/crypto/caam/sg_sw_qm2.h
+++ b/drivers/crypto/caam/sg_sw_qm2.h
@@ -35,7 +35,7 @@
#ifndef _SG_SW_QM2_H_
#define _SG_SW_QM2_H_
-#include "../../../drivers/staging/fsl-mc/include/dpaa2-fd.h"
+#include <soc/fsl/dpaa2-fd.h>
static inline void dma_to_qm_sg_one(struct dpaa2_sg_entry *qm_sg_ptr,
dma_addr_t dma, u32 len, u16 offset)
diff --git a/drivers/crypto/caam/sg_sw_sec4.h b/drivers/crypto/caam/sg_sw_sec4.h
index e586ffab8358..dbfa9fce33e0 100644
--- a/drivers/crypto/caam/sg_sw_sec4.h
+++ b/drivers/crypto/caam/sg_sw_sec4.h
@@ -12,7 +12,7 @@
#include "ctrl.h"
#include "regs.h"
#include "sg_sw_qm2.h"
-#include "../../../drivers/staging/fsl-mc/include/dpaa2-fd.h"
+#include <soc/fsl/dpaa2-fd.h>
struct sec4_sg_entry {
u64 ptr;
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 2a219b1261b1..721e6c57beae 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -363,8 +363,6 @@ static int scmi_dvfs_device_opps_add(const struct scmi_handle *handle,
return domain;
dom = pi->dom_info + domain;
- if (!dom)
- return -EIO;
for (opp = dom->opp, idx = 0; idx < dom->opp_count; idx++, opp++) {
freq = opp->perf * dom->mult_factor;
@@ -394,9 +392,6 @@ static int scmi_dvfs_transition_latency_get(const struct scmi_handle *handle,
return domain;
dom = pi->dom_info + domain;
- if (!dom)
- return -EIO;
-
/* uS to nS */
return dom->opp[dom->opp_count - 1].trans_latency_us * 1000;
}
diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci_checker.c
index bb1c068bff19..346943657962 100644
--- a/drivers/firmware/psci_checker.c
+++ b/drivers/firmware/psci_checker.c
@@ -77,28 +77,6 @@ static int psci_ops_check(void)
return 0;
}
-static int find_cpu_groups(const struct cpumask *cpus,
- const struct cpumask **cpu_groups)
-{
- unsigned int nb = 0;
- cpumask_var_t tmp;
-
- if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
- return -ENOMEM;
- cpumask_copy(tmp, cpus);
-
- while (!cpumask_empty(tmp)) {
- const struct cpumask *cpu_group =
- topology_core_cpumask(cpumask_any(tmp));
-
- cpu_groups[nb++] = cpu_group;
- cpumask_andnot(tmp, tmp, cpu_group);
- }
-
- free_cpumask_var(tmp);
- return nb;
-}
-
/*
* offlined_cpus is a temporary array but passing it as an argument avoids
* multiple allocations.
@@ -166,29 +144,66 @@ static unsigned int down_and_up_cpus(const struct cpumask *cpus,
return err;
}
+static void free_cpu_groups(int num, cpumask_var_t **pcpu_groups)
+{
+ int i;
+ cpumask_var_t *cpu_groups = *pcpu_groups;
+
+ for (i = 0; i < num; ++i)
+ free_cpumask_var(cpu_groups[i]);
+ kfree(cpu_groups);
+}
+
+static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups)
+{
+ int num_groups = 0;
+ cpumask_var_t tmp, *cpu_groups;
+
+ if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
+ return -ENOMEM;
+
+ cpu_groups = kcalloc(nb_available_cpus, sizeof(cpu_groups),
+ GFP_KERNEL);
+ if (!cpu_groups)
+ return -ENOMEM;
+
+ cpumask_copy(tmp, cpu_online_mask);
+
+ while (!cpumask_empty(tmp)) {
+ const struct cpumask *cpu_group =
+ topology_core_cpumask(cpumask_any(tmp));
+
+ if (!alloc_cpumask_var(&cpu_groups[num_groups], GFP_KERNEL)) {
+ free_cpu_groups(num_groups, &cpu_groups);
+ return -ENOMEM;
+ }
+ cpumask_copy(cpu_groups[num_groups++], cpu_group);
+ cpumask_andnot(tmp, tmp, cpu_group);
+ }
+
+ free_cpumask_var(tmp);
+ *pcpu_groups = cpu_groups;
+
+ return num_groups;
+}
+
static int hotplug_tests(void)
{
- int err;
- cpumask_var_t offlined_cpus;
- int i, nb_cpu_group;
- const struct cpumask **cpu_groups;
+ int i, nb_cpu_group, err = -ENOMEM;
+ cpumask_var_t offlined_cpus, *cpu_groups;
char *page_buf;
- err = -ENOMEM;
if (!alloc_cpumask_var(&offlined_cpus, GFP_KERNEL))
return err;
- /* We may have up to nb_available_cpus cpu_groups. */
- cpu_groups = kmalloc_array(nb_available_cpus, sizeof(*cpu_groups),
- GFP_KERNEL);
- if (!cpu_groups)
+
+ nb_cpu_group = alloc_init_cpu_groups(&cpu_groups);
+ if (nb_cpu_group < 0)
goto out_free_cpus;
page_buf = (char *)__get_free_page(GFP_KERNEL);
if (!page_buf)
goto out_free_cpu_groups;
err = 0;
- nb_cpu_group = find_cpu_groups(cpu_online_mask, cpu_groups);
-
/*
* Of course the last CPU cannot be powered down and cpu_down() should
* refuse doing that.
@@ -212,7 +227,7 @@ static int hotplug_tests(void)
free_page((unsigned long)page_buf);
out_free_cpu_groups:
- kfree(cpu_groups);
+ free_cpu_groups(nb_cpu_group, &cpu_groups);
out_free_cpus:
free_cpumask_var(offlined_cpus);
return err;
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
index 6692888f04cf..a200a2174611 100644
--- a/drivers/firmware/raspberrypi.c
+++ b/drivers/firmware/raspberrypi.c
@@ -21,6 +21,10 @@
#define MBOX_DATA28(msg) ((msg) & ~0xf)
#define MBOX_CHAN_PROPERTY 8
+#define MAX_RPI_FW_PROP_BUF_SIZE 32
+
+static struct platform_device *rpi_hwmon;
+
struct rpi_firmware {
struct mbox_client cl;
struct mbox_chan *chan; /* The property channel. */
@@ -143,18 +147,22 @@ int rpi_firmware_property(struct rpi_firmware *fw,
/* Single tags are very small (generally 8 bytes), so the
* stack should be safe.
*/
- u8 data[buf_size + sizeof(struct rpi_firmware_property_tag_header)];
+ u8 data[sizeof(struct rpi_firmware_property_tag_header) +
+ MAX_RPI_FW_PROP_BUF_SIZE];
struct rpi_firmware_property_tag_header *header =
(struct rpi_firmware_property_tag_header *)data;
int ret;
+ if (WARN_ON(buf_size > sizeof(data) - sizeof(*header)))
+ return -EINVAL;
+
header->tag = tag;
header->buf_size = buf_size;
header->req_resp_size = 0;
memcpy(data + sizeof(struct rpi_firmware_property_tag_header),
tag_data, buf_size);
- ret = rpi_firmware_property_list(fw, &data, sizeof(data));
+ ret = rpi_firmware_property_list(fw, &data, buf_size + sizeof(*header));
memcpy(tag_data,
data + sizeof(struct rpi_firmware_property_tag_header),
buf_size);
@@ -183,6 +191,20 @@ rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
}
}
+static void
+rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw)
+{
+ u32 packet;
+ int ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_THROTTLED,
+ &packet, sizeof(packet));
+
+ if (ret)
+ return;
+
+ rpi_hwmon = platform_device_register_data(dev, "raspberrypi-hwmon",
+ -1, NULL, 0);
+}
+
static int rpi_firmware_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -209,6 +231,7 @@ static int rpi_firmware_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, fw);
rpi_firmware_print_firmware_revision(fw);
+ rpi_register_hwmon_driver(dev, fw);
return 0;
}
@@ -217,6 +240,8 @@ static int rpi_firmware_remove(struct platform_device *pdev)
{
struct rpi_firmware *fw = platform_get_drvdata(pdev);
+ platform_device_unregister(rpi_hwmon);
+ rpi_hwmon = NULL;
mbox_free_channel(fw->chan);
return 0;
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index ccf42663a908..81da17a42dc9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1320,6 +1320,16 @@ config SENSORS_PWM_FAN
This driver can also be built as a module. If so, the module
will be called pwm-fan.
+config SENSORS_RASPBERRYPI_HWMON
+ tristate "Raspberry Pi voltage monitor"
+ depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
+ help
+ If you say yes here you get support for voltage sensor on the
+ Raspberry Pi.
+
+ This driver can also be built as a module. If so, the module
+ will be called raspberrypi-hwmon.
+
config SENSORS_SHT15
tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 842c92f83ce6..93f7f41ea4ad 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -143,6 +143,7 @@ obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
+obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c
new file mode 100644
index 000000000000..fb4e4a6bb1f6
--- /dev/null
+++ b/drivers/hwmon/raspberrypi-hwmon.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Raspberry Pi voltage sensor driver
+ *
+ * Based on firmware/raspberrypi.c by Noralf Trønnes
+ *
+ * Copyright (C) 2018 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+#define UNDERVOLTAGE_STICKY_BIT BIT(16)
+
+struct rpi_hwmon_data {
+ struct device *hwmon_dev;
+ struct rpi_firmware *fw;
+ u32 last_throttled;
+ struct delayed_work get_values_poll_work;
+};
+
+static void rpi_firmware_get_throttled(struct rpi_hwmon_data *data)
+{
+ u32 new_uv, old_uv, value;
+ int ret;
+
+ /* Request firmware to clear sticky bits */
+ value = 0xffff;
+
+ ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED,
+ &value, sizeof(value));
+ if (ret) {
+ dev_err_once(data->hwmon_dev, "Failed to get throttled (%d)\n",
+ ret);
+ return;
+ }
+
+ new_uv = value & UNDERVOLTAGE_STICKY_BIT;
+ old_uv = data->last_throttled & UNDERVOLTAGE_STICKY_BIT;
+ data->last_throttled = value;
+
+ if (new_uv == old_uv)
+ return;
+
+ if (new_uv)
+ dev_crit(data->hwmon_dev, "Undervoltage detected!\n");
+ else
+ dev_info(data->hwmon_dev, "Voltage normalised\n");
+
+ sysfs_notify(&data->hwmon_dev->kobj, NULL, "in0_lcrit_alarm");
+}
+
+static void get_values_poll(struct work_struct *work)
+{
+ struct rpi_hwmon_data *data;
+
+ data = container_of(work, struct rpi_hwmon_data,
+ get_values_poll_work.work);
+
+ rpi_firmware_get_throttled(data);
+
+ /*
+ * We can't run faster than the sticky shift (100ms) since we get
+ * flipping in the sticky bits that are cleared.
+ */
+ schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
+}
+
+static int rpi_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct rpi_hwmon_data *data = dev_get_drvdata(dev);
+
+ *val = !!(data->last_throttled & UNDERVOLTAGE_STICKY_BIT);
+ return 0;
+}
+
+static umode_t rpi_is_visible(const void *_data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ return 0444;
+}
+
+static const u32 rpi_in_config[] = {
+ HWMON_I_LCRIT_ALARM,
+ 0
+};
+
+static const struct hwmon_channel_info rpi_in = {
+ .type = hwmon_in,
+ .config = rpi_in_config,
+};
+
+static const struct hwmon_channel_info *rpi_info[] = {
+ &rpi_in,
+ NULL
+};
+
+static const struct hwmon_ops rpi_hwmon_ops = {
+ .is_visible = rpi_is_visible,
+ .read = rpi_read,
+};
+
+static const struct hwmon_chip_info rpi_chip_info = {
+ .ops = &rpi_hwmon_ops,
+ .info = rpi_info,
+};
+
+static int rpi_hwmon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rpi_hwmon_data *data;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ /* Parent driver assure that firmware is correct */
+ data->fw = dev_get_drvdata(dev->parent);
+
+ /* Init throttled */
+ ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED,
+ &data->last_throttled,
+ sizeof(data->last_throttled));
+
+ data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt",
+ data,
+ &rpi_chip_info,
+ NULL);
+
+ INIT_DELAYED_WORK(&data->get_values_poll_work, get_values_poll);
+ platform_set_drvdata(pdev, data);
+
+ if (!PTR_ERR_OR_ZERO(data->hwmon_dev))
+ schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
+
+ return PTR_ERR_OR_ZERO(data->hwmon_dev);
+}
+
+static int rpi_hwmon_remove(struct platform_device *pdev)
+{
+ struct rpi_hwmon_data *data = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&data->get_values_poll_work);
+
+ return 0;
+}
+
+static struct platform_driver rpi_hwmon_driver = {
+ .probe = rpi_hwmon_probe,
+ .remove = rpi_hwmon_remove,
+ .driver = {
+ .name = "raspberrypi-hwmon",
+ },
+};
+module_platform_driver(rpi_hwmon_driver);
+
+MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
+MODULE_DESCRIPTION("Raspberry Pi voltage sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c
index bb93cc53554e..bd25faf6d13d 100644
--- a/drivers/memory/tegra/mc.c
+++ b/drivers/memory/tegra/mc.c
@@ -672,13 +672,6 @@ static int tegra_mc_probe(struct platform_device *pdev)
return err;
}
- err = tegra_mc_reset_setup(mc);
- if (err < 0) {
- dev_err(&pdev->dev, "failed to register reset controller: %d\n",
- err);
- return err;
- }
-
mc->irq = platform_get_irq(pdev, 0);
if (mc->irq < 0) {
dev_err(&pdev->dev, "interrupt not specified\n");
@@ -697,13 +690,16 @@ static int tegra_mc_probe(struct platform_device *pdev)
return err;
}
+ err = tegra_mc_reset_setup(mc);
+ if (err < 0)
+ dev_err(&pdev->dev, "failed to register reset controller: %d\n",
+ err);
+
if (IS_ENABLED(CONFIG_TEGRA_IOMMU_SMMU)) {
mc->smmu = tegra_smmu_probe(&pdev->dev, mc->soc->smmu, mc);
- if (IS_ERR(mc->smmu)) {
+ if (IS_ERR(mc->smmu))
dev_err(&pdev->dev, "failed to probe SMMU: %ld\n",
PTR_ERR(mc->smmu));
- return PTR_ERR(mc->smmu);
- }
}
return 0;
diff --git a/drivers/memory/ti-emif-pm.c b/drivers/memory/ti-emif-pm.c
index 632651f4b6e8..2250d03ea17f 100644
--- a/drivers/memory/ti-emif-pm.c
+++ b/drivers/memory/ti-emif-pm.c
@@ -249,6 +249,34 @@ static const struct of_device_id ti_emif_of_match[] = {
};
MODULE_DEVICE_TABLE(of, ti_emif_of_match);
+#ifdef CONFIG_PM_SLEEP
+static int ti_emif_resume(struct device *dev)
+{
+ unsigned long tmp =
+ __raw_readl((void *)emif_instance->ti_emif_sram_virt);
+
+ /*
+ * Check to see if what we are copying is already present in the
+ * first byte at the destination, only copy if it is not which
+ * indicates we have lost context and sram no longer contains
+ * the PM code
+ */
+ if (tmp != ti_emif_sram)
+ ti_emif_push_sram(dev, emif_instance);
+
+ return 0;
+}
+
+static int ti_emif_suspend(struct device *dev)
+{
+ /*
+ * The contents will be present in DDR hence no need to
+ * explicitly save
+ */
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
static int ti_emif_probe(struct platform_device *pdev)
{
int ret;
@@ -308,12 +336,17 @@ static int ti_emif_remove(struct platform_device *pdev)
return 0;
}
+static const struct dev_pm_ops ti_emif_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(ti_emif_suspend, ti_emif_resume)
+};
+
static struct platform_driver ti_emif_driver = {
.probe = ti_emif_probe,
.remove = ti_emif_remove,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = of_match_ptr(ti_emif_of_match),
+ .pm = &ti_emif_pm_ops,
},
};
module_platform_driver(ti_emif_driver);
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index c0b292be1b72..a70262cb7e56 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -82,6 +82,15 @@ config RESET_PISTACHIO
help
This enables the reset driver for ImgTec Pistachio SoCs.
+config RESET_QCOM_AOSS
+ bool "Qcom AOSS Reset Driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ This enables the AOSS (always on subsystem) reset driver
+ for Qualcomm SDM845 SoCs. Say Y if you want to control
+ reset signals provided by AOSS for Modem, Venus, ADSP,
+ GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
+
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
@@ -138,6 +147,16 @@ config RESET_UNIPHIER
Say Y if you want to control reset signals provided by System Control
block, Media I/O block, Peripheral Block.
+config RESET_UNIPHIER_USB3
+ tristate "USB3 reset driver for UniPhier SoCs"
+ depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+ default ARCH_UNIPHIER
+ select RESET_SIMPLE
+ help
+ Support for the USB3 core reset on UniPhier SoCs.
+ Say Y if you want to control reset signals provided by
+ USB3 glue layer.
+
config RESET_ZYNQ
bool "ZYNQ Reset Driver" if COMPILE_TEST
default ARCH_ZYNQ
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index c1261dcfe9ad..0676b6b1976f 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -14,11 +14,13 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
+obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o
obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
diff --git a/drivers/reset/reset-qcom-aoss.c b/drivers/reset/reset-qcom-aoss.c
new file mode 100644
index 000000000000..36db96750450
--- /dev/null
+++ b/drivers/reset/reset-qcom-aoss.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+
+struct qcom_aoss_reset_map {
+ unsigned int reg;
+};
+
+struct qcom_aoss_desc {
+ const struct qcom_aoss_reset_map *resets;
+ size_t num_resets;
+};
+
+struct qcom_aoss_reset_data {
+ struct reset_controller_dev rcdev;
+ void __iomem *base;
+ const struct qcom_aoss_desc *desc;
+};
+
+static const struct qcom_aoss_reset_map sdm845_aoss_resets[] = {
+ [AOSS_CC_MSS_RESTART] = {0x10000},
+ [AOSS_CC_CAMSS_RESTART] = {0x11000},
+ [AOSS_CC_VENUS_RESTART] = {0x12000},
+ [AOSS_CC_GPU_RESTART] = {0x13000},
+ [AOSS_CC_DISPSS_RESTART] = {0x14000},
+ [AOSS_CC_WCSS_RESTART] = {0x20000},
+ [AOSS_CC_LPASS_RESTART] = {0x30000},
+};
+
+static const struct qcom_aoss_desc sdm845_aoss_desc = {
+ .resets = sdm845_aoss_resets,
+ .num_resets = ARRAY_SIZE(sdm845_aoss_resets),
+};
+
+static inline struct qcom_aoss_reset_data *to_qcom_aoss_reset_data(
+ struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct qcom_aoss_reset_data, rcdev);
+}
+
+static int qcom_aoss_control_assert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
+ const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
+
+ writel(1, data->base + map->reg);
+ /* Wait 6 32kHz sleep cycles for reset */
+ usleep_range(200, 300);
+ return 0;
+}
+
+static int qcom_aoss_control_deassert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
+ const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
+
+ writel(0, data->base + map->reg);
+ /* Wait 6 32kHz sleep cycles for reset */
+ usleep_range(200, 300);
+ return 0;
+}
+
+static int qcom_aoss_control_reset(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ qcom_aoss_control_assert(rcdev, idx);
+
+ return qcom_aoss_control_deassert(rcdev, idx);
+}
+
+static const struct reset_control_ops qcom_aoss_reset_ops = {
+ .reset = qcom_aoss_control_reset,
+ .assert = qcom_aoss_control_assert,
+ .deassert = qcom_aoss_control_deassert,
+};
+
+static int qcom_aoss_reset_probe(struct platform_device *pdev)
+{
+ struct qcom_aoss_reset_data *data;
+ struct device *dev = &pdev->dev;
+ const struct qcom_aoss_desc *desc;
+ struct resource *res;
+
+ desc = of_device_get_match_data(dev);
+ if (!desc)
+ return -EINVAL;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->desc = desc;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(data->base))
+ return PTR_ERR(data->base);
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.ops = &qcom_aoss_reset_ops;
+ data->rcdev.nr_resets = desc->num_resets;
+ data->rcdev.of_node = dev->of_node;
+
+ return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static const struct of_device_id qcom_aoss_reset_of_match[] = {
+ { .compatible = "qcom,sdm845-aoss-cc", .data = &sdm845_aoss_desc },
+ {}
+};
+
+static struct platform_driver qcom_aoss_reset_driver = {
+ .probe = qcom_aoss_reset_probe,
+ .driver = {
+ .name = "qcom_aoss_reset",
+ .of_match_table = qcom_aoss_reset_of_match,
+ },
+};
+
+builtin_platform_driver(qcom_aoss_reset_driver);
+
+MODULE_DESCRIPTION("Qualcomm AOSS Reset Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index f7ce8910a392..a91107fc9e27 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -87,6 +87,7 @@ const struct reset_control_ops reset_simple_ops = {
.deassert = reset_simple_deassert,
.status = reset_simple_status,
};
+EXPORT_SYMBOL_GPL(reset_simple_ops);
/**
* struct reset_simple_devdata - simple reset controller properties
diff --git a/drivers/reset/reset-uniphier-usb3.c b/drivers/reset/reset-uniphier-usb3.c
new file mode 100644
index 000000000000..ffa1b19b594d
--- /dev/null
+++ b/drivers/reset/reset-uniphier-usb3.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// reset-uniphier-usb3.c - USB3 reset driver for UniPhier
+// Copyright 2018 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "reset-simple.h"
+
+#define MAX_CLKS 2
+#define MAX_RSTS 2
+
+struct uniphier_usb3_reset_soc_data {
+ int nclks;
+ const char * const *clock_names;
+ int nrsts;
+ const char * const *reset_names;
+};
+
+struct uniphier_usb3_reset_priv {
+ struct clk_bulk_data clk[MAX_CLKS];
+ struct reset_control *rst[MAX_RSTS];
+ struct reset_simple_data rdata;
+ const struct uniphier_usb3_reset_soc_data *data;
+};
+
+static int uniphier_usb3_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct uniphier_usb3_reset_priv *priv;
+ struct resource *res;
+ resource_size_t size;
+ const char *name;
+ int i, ret, nr;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->data = of_device_get_match_data(dev);
+ if (WARN_ON(!priv->data || priv->data->nclks > MAX_CLKS ||
+ priv->data->nrsts > MAX_RSTS))
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ size = resource_size(res);
+ priv->rdata.membase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->rdata.membase))
+ return PTR_ERR(priv->rdata.membase);
+
+ for (i = 0; i < priv->data->nclks; i++)
+ priv->clk[i].id = priv->data->clock_names[i];
+ ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < priv->data->nrsts; i++) {
+ name = priv->data->reset_names[i];
+ priv->rst[i] = devm_reset_control_get_shared(dev, name);
+ if (IS_ERR(priv->rst[i]))
+ return PTR_ERR(priv->rst[i]);
+ }
+
+ ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
+ if (ret)
+ return ret;
+
+ for (nr = 0; nr < priv->data->nrsts; nr++) {
+ ret = reset_control_deassert(priv->rst[nr]);
+ if (ret)
+ goto out_rst_assert;
+ }
+
+ spin_lock_init(&priv->rdata.lock);
+ priv->rdata.rcdev.owner = THIS_MODULE;
+ priv->rdata.rcdev.nr_resets = size * BITS_PER_BYTE;
+ priv->rdata.rcdev.ops = &reset_simple_ops;
+ priv->rdata.rcdev.of_node = dev->of_node;
+ priv->rdata.active_low = true;
+
+ platform_set_drvdata(pdev, priv);
+
+ ret = devm_reset_controller_register(dev, &priv->rdata.rcdev);
+ if (ret)
+ goto out_rst_assert;
+
+ return 0;
+
+out_rst_assert:
+ while (nr--)
+ reset_control_assert(priv->rst[nr]);
+
+ clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+ return ret;
+}
+
+static int uniphier_usb3_reset_remove(struct platform_device *pdev)
+{
+ struct uniphier_usb3_reset_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < priv->data->nrsts; i++)
+ reset_control_assert(priv->rst[i]);
+
+ clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+ return 0;
+}
+
+static const char * const uniphier_pro4_clock_reset_names[] = {
+ "gio", "link",
+};
+
+static const struct uniphier_usb3_reset_soc_data uniphier_pro4_data = {
+ .nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+ .clock_names = uniphier_pro4_clock_reset_names,
+ .nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+ .reset_names = uniphier_pro4_clock_reset_names,
+};
+
+static const char * const uniphier_pxs2_clock_reset_names[] = {
+ "link",
+};
+
+static const struct uniphier_usb3_reset_soc_data uniphier_pxs2_data = {
+ .nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+ .clock_names = uniphier_pxs2_clock_reset_names,
+ .nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+ .reset_names = uniphier_pxs2_clock_reset_names,
+};
+
+static const struct of_device_id uniphier_usb3_reset_match[] = {
+ {
+ .compatible = "socionext,uniphier-pro4-usb3-reset",
+ .data = &uniphier_pro4_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-usb3-reset",
+ .data = &uniphier_pxs2_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-usb3-reset",
+ .data = &uniphier_pxs2_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs3-usb3-reset",
+ .data = &uniphier_pxs2_data,
+ },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_usb3_reset_match);
+
+static struct platform_driver uniphier_usb3_reset_driver = {
+ .probe = uniphier_usb3_reset_probe,
+ .remove = uniphier_usb3_reset_remove,
+ .driver = {
+ .name = "uniphier-usb3-reset",
+ .of_match_table = uniphier_usb3_reset_match,
+ },
+};
+module_platform_driver(uniphier_usb3_reset_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier USB3 Reset Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index e9030ff1bf2f..5605745663ae 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -202,6 +202,12 @@ static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
#define UNIPHIER_PERI_RESET_FI2C(id, ch) \
UNIPHIER_RESETX((id), 0x114, 24 + (ch))
+#define UNIPHIER_PERI_RESET_SCSSI(id) \
+ UNIPHIER_RESETX((id), 0x110, 17)
+
+#define UNIPHIER_PERI_RESET_MCSSI(id) \
+ UNIPHIER_RESETX((id), 0x114, 14)
+
static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_UART(0, 0),
UNIPHIER_PERI_RESET_UART(1, 1),
@@ -212,6 +218,7 @@ static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_I2C(6, 2),
UNIPHIER_PERI_RESET_I2C(7, 3),
UNIPHIER_PERI_RESET_I2C(8, 4),
+ UNIPHIER_PERI_RESET_SCSSI(11),
UNIPHIER_RESET_END,
};
@@ -227,6 +234,8 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_FI2C(8, 4),
UNIPHIER_PERI_RESET_FI2C(9, 5),
UNIPHIER_PERI_RESET_FI2C(10, 6),
+ UNIPHIER_PERI_RESET_SCSSI(11),
+ UNIPHIER_PERI_RESET_MCSSI(12),
UNIPHIER_RESET_END,
};
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
index dcf8c8065508..a5577dd5eb08 100644
--- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -628,10 +628,26 @@ static const struct of_device_id ddr_shimphy_dt_ids[] = {
static const struct of_device_id brcmstb_memc_of_match[] = {
{
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.1",
+ .data = &ddr_seq,
+ },
+ {
.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.2",
.data = &ddr_seq_b22,
},
{
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.3",
+ .data = &ddr_seq_b22,
+ },
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.3.0",
+ .data = &ddr_seq_b22,
+ },
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.3.1",
+ .data = &ddr_seq_b22,
+ },
+ {
.compatible = "brcm,brcmstb-memc-ddr",
.data = &ddr_seq,
},
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index 7a9fb9baa66d..8f80e8bbf29e 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -1,7 +1,9 @@
#
-# Freescale SOC drivers
+# NXP/Freescale QorIQ series SOC drivers
#
+menu "NXP/Freescale QorIQ SoC drivers"
+
source "drivers/soc/fsl/qbman/Kconfig"
source "drivers/soc/fsl/qe/Kconfig"
@@ -16,3 +18,14 @@ config FSL_GUTS
Initially only reading SVR and registering soc device are supported.
Other guts accesses, such as reading RCW, should eventually be moved
into this driver as well.
+
+config FSL_MC_DPIO
+ tristate "QorIQ DPAA2 DPIO driver"
+ depends on FSL_MC_BUS
+ help
+ Driver for the DPAA2 DPIO object. A DPIO provides queue and
+ buffer management facilities for software to interact with
+ other DPAA2 objects. This driver does not expose the DPIO
+ objects individually, but groups them under a service layer
+ API.
+endmenu
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 44b3bebef24a..803ef1bfb5ff 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_FSL_DPAA) += qbman/
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
obj-$(CONFIG_FSL_GUTS) += guts.o
+obj-$(CONFIG_FSL_MC_DPIO) += dpio/
diff --git a/drivers/staging/fsl-mc/bus/dpio/Makefile b/drivers/soc/fsl/dpio/Makefile
index b9ff24c76582..b9ff24c76582 100644
--- a/drivers/staging/fsl-mc/bus/dpio/Makefile
+++ b/drivers/soc/fsl/dpio/Makefile
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-cmd.h b/drivers/soc/fsl/dpio/dpio-cmd.h
index ab8f82ee7ee5..ab8f82ee7ee5 100644
--- a/drivers/staging/fsl-mc/bus/dpio/dpio-cmd.h
+++ b/drivers/soc/fsl/dpio/dpio-cmd.h
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.c b/drivers/soc/fsl/dpio/dpio-driver.c
index 11a90a90d827..b60b77bfaffa 100644
--- a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.c
+++ b/drivers/soc/fsl/dpio/dpio-driver.c
@@ -16,7 +16,7 @@
#include <linux/io.h>
#include <linux/fsl/mc.h>
-#include "../../include/dpaa2-io.h"
+#include <soc/fsl/dpaa2-io.h>
#include "qbman-portal.h"
#include "dpio.h"
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index 14ed2beb7432..9b17f72349ed 100644
--- a/drivers/staging/fsl-mc/bus/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -6,7 +6,7 @@
*/
#include <linux/types.h>
#include <linux/fsl/mc.h>
-#include "../../include/dpaa2-io.h"
+#include <soc/fsl/dpaa2-io.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio.c b/drivers/soc/fsl/dpio/dpio.c
index ff37c80e11a0..ff37c80e11a0 100644
--- a/drivers/staging/fsl-mc/bus/dpio/dpio.c
+++ b/drivers/soc/fsl/dpio/dpio.c
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio.h b/drivers/soc/fsl/dpio/dpio.h
index 49194c8e45f1..49194c8e45f1 100644
--- a/drivers/staging/fsl-mc/bus/dpio/dpio.h
+++ b/drivers/soc/fsl/dpio/dpio.h
diff --git a/drivers/staging/fsl-mc/bus/dpio/qbman-portal.c b/drivers/soc/fsl/dpio/qbman-portal.c
index 116fafb28640..cf1d448ea468 100644
--- a/drivers/staging/fsl-mc/bus/dpio/qbman-portal.c
+++ b/drivers/soc/fsl/dpio/qbman-portal.c
@@ -8,7 +8,7 @@
#include <asm/cacheflush.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include "../../include/dpaa2-global.h"
+#include <soc/fsl/dpaa2-global.h>
#include "qbman-portal.h"
diff --git a/drivers/staging/fsl-mc/bus/dpio/qbman-portal.h b/drivers/soc/fsl/dpio/qbman-portal.h
index 69db3c818742..89d1dd9969b6 100644
--- a/drivers/staging/fsl-mc/bus/dpio/qbman-portal.h
+++ b/drivers/soc/fsl/dpio/qbman-portal.h
@@ -7,7 +7,7 @@
#ifndef __FSL_QBMAN_PORTAL_H
#define __FSL_QBMAN_PORTAL_H
-#include "../../include/dpaa2-fd.h"
+#include <soc/fsl/dpaa2-fd.h>
struct dpaa2_dq;
struct qbman_swp;
diff --git a/drivers/soc/fsl/qbman/Kconfig b/drivers/soc/fsl/qbman/Kconfig
index fb4e6bf0a0c4..d570cb5fd381 100644
--- a/drivers/soc/fsl/qbman/Kconfig
+++ b/drivers/soc/fsl/qbman/Kconfig
@@ -1,5 +1,5 @@
menuconfig FSL_DPAA
- bool "Freescale DPAA 1.x support"
+ bool "QorIQ DPAA1 framework support"
depends on (FSL_SOC_BOOKE || ARCH_LAYERSCAPE)
select GENERIC_ALLOCATOR
help
diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig
index 73a2e08b47ef..fabba17e9d65 100644
--- a/drivers/soc/fsl/qe/Kconfig
+++ b/drivers/soc/fsl/qe/Kconfig
@@ -3,7 +3,7 @@
#
config QUICC_ENGINE
- bool "Freescale QUICC Engine (QE) Support"
+ bool "QUICC Engine (QE) framework support"
depends on FSL_SOC && PPC32
select GENERIC_ALLOCATOR
select CRC32
diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
index 3b27075c21a7..819bed0f5667 100644
--- a/drivers/soc/fsl/qe/gpio.c
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -83,6 +83,33 @@ static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
spin_unlock_irqrestore(&qe_gc->lock, flags);
}
+static void qe_gpio_set_multiple(struct gpio_chip *gc,
+ unsigned long *mask, unsigned long *bits)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = gpiochip_get_data(gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ for (i = 0; i < gc->ngpio; i++) {
+ if (*mask == 0)
+ break;
+ if (__test_and_clear_bit(i, mask)) {
+ if (test_bit(i, bits))
+ qe_gc->cpdata |= (1U << (QE_PIO_PINS - 1 - i));
+ else
+ qe_gc->cpdata &= ~(1U << (QE_PIO_PINS - 1 - i));
+ }
+ }
+
+ out_be32(&regs->cpdata, qe_gc->cpdata);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
@@ -298,6 +325,7 @@ static int __init qe_add_gpiochips(void)
gc->direction_output = qe_gpio_dir_out;
gc->get = qe_gpio_get;
gc->set = qe_gpio_set;
+ gc->set_multiple = qe_gpio_set_multiple;
ret = of_mm_gpiochip_add_data(np, mm_gc, qe_gc);
if (ret)
diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c
index 546960a18d60..b3da635970ea 100644
--- a/drivers/soc/imx/gpc.c
+++ b/drivers/soc/imx/gpc.c
@@ -54,7 +54,6 @@ struct imx_pm_domain {
unsigned int reg_offs;
signed char cntr_pdn_bit;
unsigned int ipg_rate_mhz;
- unsigned int flags;
};
static inline struct imx_pm_domain *
@@ -69,9 +68,6 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
int iso, iso2sw;
u32 val;
- if (pd->flags & PGC_DOMAIN_FLAG_NO_PD)
- return -EBUSY;
-
/* Read ISO and ISO2SW power down delays */
regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
iso = val & 0x3f;
@@ -295,26 +291,31 @@ static struct imx_pm_domain imx_gpc_domains[] = {
struct imx_gpc_dt_data {
int num_domains;
bool err009619_present;
+ bool err006287_present;
};
static const struct imx_gpc_dt_data imx6q_dt_data = {
.num_domains = 2,
.err009619_present = false,
+ .err006287_present = false,
};
static const struct imx_gpc_dt_data imx6qp_dt_data = {
.num_domains = 2,
.err009619_present = true,
+ .err006287_present = false,
};
static const struct imx_gpc_dt_data imx6sl_dt_data = {
.num_domains = 3,
.err009619_present = false,
+ .err006287_present = true,
};
static const struct imx_gpc_dt_data imx6sx_dt_data = {
.num_domains = 4,
.err009619_present = false,
+ .err006287_present = false,
};
static const struct of_device_id imx_gpc_dt_ids[] = {
@@ -434,8 +435,13 @@ static int imx_gpc_probe(struct platform_device *pdev)
/* Disable PU power down in normal operation if ERR009619 is present */
if (of_id_data->err009619_present)
- imx_gpc_domains[GPC_PGC_DOMAIN_PU].flags |=
- PGC_DOMAIN_FLAG_NO_PD;
+ imx_gpc_domains[GPC_PGC_DOMAIN_PU].base.flags |=
+ GENPD_FLAG_ALWAYS_ON;
+
+ /* Keep DISP always on if ERR006287 is present */
+ if (of_id_data->err006287_present)
+ imx_gpc_domains[GPC_PGC_DOMAIN_DISPLAY].base.flags |=
+ GENPD_FLAG_ALWAYS_ON;
if (!pgc_node) {
ret = imx_gpc_old_dt_init(&pdev->dev, regmap,
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index 2afae64061d8..4e931fdf4d09 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -146,6 +146,21 @@ static const u32 mt6397_regs[] = {
[PWRAP_DEW_CIPHER_SWRST] = 0xbc24,
};
+static const u32 mt6351_regs[] = {
+ [PWRAP_DEW_DIO_EN] = 0x02F2,
+ [PWRAP_DEW_READ_TEST] = 0x02F4,
+ [PWRAP_DEW_WRITE_TEST] = 0x02F6,
+ [PWRAP_DEW_CRC_EN] = 0x02FA,
+ [PWRAP_DEW_CRC_VAL] = 0x02FC,
+ [PWRAP_DEW_CIPHER_KEY_SEL] = 0x0300,
+ [PWRAP_DEW_CIPHER_IV_SEL] = 0x0302,
+ [PWRAP_DEW_CIPHER_EN] = 0x0304,
+ [PWRAP_DEW_CIPHER_RDY] = 0x0306,
+ [PWRAP_DEW_CIPHER_MODE] = 0x0308,
+ [PWRAP_DEW_CIPHER_SWRST] = 0x030A,
+ [PWRAP_DEW_RDDMY_NO] = 0x030C,
+};
+
enum pwrap_regs {
PWRAP_MUX_SEL,
PWRAP_WRAP_EN,
@@ -366,6 +381,39 @@ static int mt2701_regs[] = {
[PWRAP_ADC_RDATA_ADDR2] = 0x154,
};
+static int mt6797_regs[] = {
+ [PWRAP_MUX_SEL] = 0x0,
+ [PWRAP_WRAP_EN] = 0x4,
+ [PWRAP_DIO_EN] = 0x8,
+ [PWRAP_SIDLY] = 0xC,
+ [PWRAP_RDDMY] = 0x10,
+ [PWRAP_CSHEXT_WRITE] = 0x18,
+ [PWRAP_CSHEXT_READ] = 0x1C,
+ [PWRAP_CSLEXT_START] = 0x20,
+ [PWRAP_CSLEXT_END] = 0x24,
+ [PWRAP_STAUPD_PRD] = 0x28,
+ [PWRAP_HARB_HPRIO] = 0x50,
+ [PWRAP_HIPRIO_ARB_EN] = 0x54,
+ [PWRAP_MAN_EN] = 0x60,
+ [PWRAP_MAN_CMD] = 0x64,
+ [PWRAP_WACS0_EN] = 0x70,
+ [PWRAP_WACS1_EN] = 0x84,
+ [PWRAP_WACS2_EN] = 0x98,
+ [PWRAP_INIT_DONE2] = 0x9C,
+ [PWRAP_WACS2_CMD] = 0xA0,
+ [PWRAP_WACS2_RDATA] = 0xA4,
+ [PWRAP_WACS2_VLDCLR] = 0xA8,
+ [PWRAP_INT_EN] = 0xC0,
+ [PWRAP_INT_FLG_RAW] = 0xC4,
+ [PWRAP_INT_FLG] = 0xC8,
+ [PWRAP_INT_CLR] = 0xCC,
+ [PWRAP_TIMER_EN] = 0xF4,
+ [PWRAP_WDT_UNIT] = 0xFC,
+ [PWRAP_WDT_SRC_EN] = 0x100,
+ [PWRAP_DCM_EN] = 0x1CC,
+ [PWRAP_DCM_DBC_PRD] = 0x1D4,
+};
+
static int mt7622_regs[] = {
[PWRAP_MUX_SEL] = 0x0,
[PWRAP_WRAP_EN] = 0x4,
@@ -635,12 +683,14 @@ static int mt8135_regs[] = {
enum pmic_type {
PMIC_MT6323,
+ PMIC_MT6351,
PMIC_MT6380,
PMIC_MT6397,
};
enum pwrap_type {
PWRAP_MT2701,
+ PWRAP_MT6797,
PWRAP_MT7622,
PWRAP_MT8135,
PWRAP_MT8173,
@@ -1067,6 +1117,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
pwrap_writel(wrp, 1, PWRAP_CIPHER_START);
break;
case PWRAP_MT2701:
+ case PWRAP_MT6797:
case PWRAP_MT8173:
pwrap_writel(wrp, 1, PWRAP_CIPHER_EN);
break;
@@ -1080,8 +1131,6 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_SWRST], 0x0);
pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_KEY_SEL], 0x1);
pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_IV_SEL], 0x2);
- pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_LOAD], 0x1);
- pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_START], 0x1);
switch (wrp->slave->type) {
case PMIC_MT6397:
@@ -1091,6 +1140,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
0x1);
break;
case PMIC_MT6323:
+ case PMIC_MT6351:
pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_EN],
0x1);
break;
@@ -1367,6 +1417,15 @@ static const struct pwrap_slv_type pmic_mt6397 = {
.pwrap_write = pwrap_write16,
};
+static const struct pwrap_slv_type pmic_mt6351 = {
+ .dew_regs = mt6351_regs,
+ .type = PMIC_MT6351,
+ .regmap = &pwrap_regmap_config16,
+ .caps = 0,
+ .pwrap_read = pwrap_read16,
+ .pwrap_write = pwrap_write16,
+};
+
static const struct of_device_id of_slave_match_tbl[] = {
{
.compatible = "mediatek,mt6323",
@@ -1381,6 +1440,9 @@ static const struct of_device_id of_slave_match_tbl[] = {
.compatible = "mediatek,mt6397",
.data = &pmic_mt6397,
}, {
+ .compatible = "mediatek,mt6351",
+ .data = &pmic_mt6351,
+ }, {
/* sentinel */
}
};
@@ -1398,6 +1460,18 @@ static const struct pmic_wrapper_type pwrap_mt2701 = {
.init_soc_specific = pwrap_mt2701_init_soc_specific,
};
+static const struct pmic_wrapper_type pwrap_mt6797 = {
+ .regs = mt6797_regs,
+ .type = PWRAP_MT6797,
+ .arb_en_all = 0x01fff,
+ .int_en_all = 0xffffffc6,
+ .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
+ .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
+ .has_bridge = 0,
+ .init_reg_clock = pwrap_common_init_reg_clock,
+ .init_soc_specific = NULL,
+};
+
static const struct pmic_wrapper_type pwrap_mt7622 = {
.regs = mt7622_regs,
.type = PWRAP_MT7622,
@@ -1439,6 +1513,9 @@ static const struct of_device_id of_pwrap_match_tbl[] = {
.compatible = "mediatek,mt2701-pwrap",
.data = &pwrap_mt2701,
}, {
+ .compatible = "mediatek,mt6797-pwrap",
+ .data = &pwrap_mt6797,
+ }, {
.compatible = "mediatek,mt7622-pwrap",
.data = &pwrap_mt7622,
}, {
diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c
index 882be5ed7e84..b4b0f3480bd3 100644
--- a/drivers/soc/sunxi/sunxi_sram.c
+++ b/drivers/soc/sunxi/sunxi_sram.c
@@ -17,6 +17,7 @@
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/soc/sunxi/sunxi_sram.h>
@@ -63,6 +64,12 @@ static struct sunxi_sram_desc sun4i_a10_sram_a3_a4 = {
SUNXI_SRAM_MAP(1, 1, "emac")),
};
+static struct sunxi_sram_desc sun4i_a10_sram_c1 = {
+ .data = SUNXI_SRAM_DATA("C1", 0x0, 0x0, 31,
+ SUNXI_SRAM_MAP(0, 0, "cpu"),
+ SUNXI_SRAM_MAP(0x7fffffff, 1, "ve")),
+};
+
static struct sunxi_sram_desc sun4i_a10_sram_d = {
.data = SUNXI_SRAM_DATA("D", 0x4, 0x0, 1,
SUNXI_SRAM_MAP(0, 0, "cpu"),
@@ -81,6 +88,10 @@ static const struct of_device_id sunxi_sram_dt_ids[] = {
.data = &sun4i_a10_sram_a3_a4.data,
},
{
+ .compatible = "allwinner,sun4i-a10-sram-c1",
+ .data = &sun4i_a10_sram_c1.data,
+ },
+ {
.compatible = "allwinner,sun4i-a10-sram-d",
.data = &sun4i_a10_sram_d.data,
},
@@ -281,13 +292,51 @@ int sunxi_sram_release(struct device *dev)
}
EXPORT_SYMBOL(sunxi_sram_release);
+struct sunxi_sramc_variant {
+ bool has_emac_clock;
+};
+
+static const struct sunxi_sramc_variant sun4i_a10_sramc_variant = {
+ /* Nothing special */
+};
+
+static const struct sunxi_sramc_variant sun50i_a64_sramc_variant = {
+ .has_emac_clock = true,
+};
+
+#define SUNXI_SRAM_EMAC_CLOCK_REG 0x30
+static bool sunxi_sram_regmap_accessible_reg(struct device *dev,
+ unsigned int reg)
+{
+ if (reg == SUNXI_SRAM_EMAC_CLOCK_REG)
+ return true;
+ return false;
+}
+
+static struct regmap_config sunxi_sram_emac_clock_regmap = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ /* last defined register */
+ .max_register = SUNXI_SRAM_EMAC_CLOCK_REG,
+ /* other devices have no business accessing other registers */
+ .readable_reg = sunxi_sram_regmap_accessible_reg,
+ .writeable_reg = sunxi_sram_regmap_accessible_reg,
+};
+
static int sunxi_sram_probe(struct platform_device *pdev)
{
struct resource *res;
struct dentry *d;
+ struct regmap *emac_clock;
+ const struct sunxi_sramc_variant *variant;
sram_dev = &pdev->dev;
+ variant = of_device_get_match_data(&pdev->dev);
+ if (!variant)
+ return -EINVAL;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
@@ -300,12 +349,46 @@ static int sunxi_sram_probe(struct platform_device *pdev)
if (!d)
return -ENOMEM;
+ if (variant->has_emac_clock) {
+ emac_clock = devm_regmap_init_mmio(&pdev->dev, base,
+ &sunxi_sram_emac_clock_regmap);
+
+ if (IS_ERR(emac_clock))
+ return PTR_ERR(emac_clock);
+ }
+
return 0;
}
static const struct of_device_id sunxi_sram_dt_match[] = {
- { .compatible = "allwinner,sun4i-a10-sram-controller" },
- { .compatible = "allwinner,sun50i-a64-sram-controller" },
+ {
+ .compatible = "allwinner,sun4i-a10-sram-controller",
+ .data = &sun4i_a10_sramc_variant,
+ },
+ {
+ .compatible = "allwinner,sun4i-a10-system-control",
+ .data = &sun4i_a10_sramc_variant,
+ },
+ {
+ .compatible = "allwinner,sun5i-a13-system-control",
+ .data = &sun4i_a10_sramc_variant,
+ },
+ {
+ .compatible = "allwinner,sun8i-a23-system-control",
+ .data = &sun4i_a10_sramc_variant,
+ },
+ {
+ .compatible = "allwinner,sun8i-h3-system-control",
+ .data = &sun4i_a10_sramc_variant,
+ },
+ {
+ .compatible = "allwinner,sun50i-a64-sram-controller",
+ .data = &sun50i_a64_sramc_variant,
+ },
+ {
+ .compatible = "allwinner,sun50i-a64-system-control",
+ .data = &sun50i_a64_sramc_variant,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, sunxi_sram_dt_match);
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index 369aef5e7228..f5cb8c0af09f 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -46,6 +46,7 @@
#define M3_BASELINE_VERSION 0x191
#define M3_STATUS_RESP_MASK (0xffff << 16)
#define M3_FW_VERSION_MASK 0xffff
+#define M3_WAKE_SRC_MASK 0xff
#define M3_STATE_UNKNOWN 0
#define M3_STATE_RESET 1
@@ -55,6 +56,23 @@
static struct wkup_m3_ipc *m3_ipc_state;
+static const struct wkup_m3_wakeup_src wakeups[] = {
+ {.irq_nr = 35, .src = "USB0_PHY"},
+ {.irq_nr = 36, .src = "USB1_PHY"},
+ {.irq_nr = 40, .src = "I2C0"},
+ {.irq_nr = 41, .src = "RTC Timer"},
+ {.irq_nr = 42, .src = "RTC Alarm"},
+ {.irq_nr = 43, .src = "Timer0"},
+ {.irq_nr = 44, .src = "Timer1"},
+ {.irq_nr = 45, .src = "UART"},
+ {.irq_nr = 46, .src = "GPIO0"},
+ {.irq_nr = 48, .src = "MPU_WAKE"},
+ {.irq_nr = 49, .src = "WDT0"},
+ {.irq_nr = 50, .src = "WDT1"},
+ {.irq_nr = 51, .src = "ADC_TSC"},
+ {.irq_nr = 0, .src = "Unknown"},
+};
+
static void am33xx_txev_eoi(struct wkup_m3_ipc *m3_ipc)
{
writel(AM33XX_M3_TXEV_ACK,
@@ -329,12 +347,45 @@ static int wkup_m3_finish_low_power(struct wkup_m3_ipc *m3_ipc)
return 0;
}
+/**
+ * wkup_m3_request_wake_src - Get the wakeup source info passed from wkup_m3
+ * @m3_ipc: Pointer to wkup_m3_ipc context
+ */
+static const char *wkup_m3_request_wake_src(struct wkup_m3_ipc *m3_ipc)
+{
+ unsigned int wakeup_src_idx;
+ int j, val;
+
+ val = wkup_m3_ctrl_ipc_read(m3_ipc, 6);
+
+ wakeup_src_idx = val & M3_WAKE_SRC_MASK;
+
+ for (j = 0; j < ARRAY_SIZE(wakeups) - 1; j++) {
+ if (wakeups[j].irq_nr == wakeup_src_idx)
+ return wakeups[j].src;
+ }
+ return wakeups[j].src;
+}
+
+/**
+ * wkup_m3_set_rtc_only - Set the rtc_only flag
+ * @wkup_m3_wakeup: struct wkup_m3_wakeup_src * gets assigned the
+ * wakeup src value
+ */
+static void wkup_m3_set_rtc_only(struct wkup_m3_ipc *m3_ipc)
+{
+ if (m3_ipc_state)
+ m3_ipc_state->is_rtc_only = true;
+}
+
static struct wkup_m3_ipc_ops ipc_ops = {
.set_mem_type = wkup_m3_set_mem_type,
.set_resume_address = wkup_m3_set_resume_address,
.prepare_low_power = wkup_m3_prepare_low_power,
.finish_low_power = wkup_m3_finish_low_power,
.request_pm_status = wkup_m3_request_pm_status,
+ .request_wake_src = wkup_m3_request_wake_src,
+ .set_rtc_only = wkup_m3_set_rtc_only,
};
/**
@@ -484,6 +535,30 @@ static int wkup_m3_ipc_remove(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused wkup_m3_ipc_suspend(struct device *dev)
+{
+ /*
+ * Nothing needs to be done on suspend even with rtc_only flag set
+ */
+ return 0;
+}
+
+static int __maybe_unused wkup_m3_ipc_resume(struct device *dev)
+{
+ if (m3_ipc_state->is_rtc_only) {
+ rproc_shutdown(m3_ipc_state->rproc);
+ rproc_boot(m3_ipc_state->rproc);
+ }
+
+ m3_ipc_state->is_rtc_only = false;
+
+ return 0;
+}
+
+static const struct dev_pm_ops wkup_m3_ipc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(wkup_m3_ipc_suspend, wkup_m3_ipc_resume)
+};
+
static const struct of_device_id wkup_m3_ipc_of_match[] = {
{ .compatible = "ti,am3352-wkup-m3-ipc", },
{ .compatible = "ti,am4372-wkup-m3-ipc", },
@@ -497,6 +572,7 @@ static struct platform_driver wkup_m3_ipc_driver = {
.driver = {
.name = "wkup_m3_ipc",
.of_match_table = wkup_m3_ipc_of_match,
+ .pm = &wkup_m3_ipc_pm_ops,
},
};
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 396fb3d56398..1abf76be2aa8 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -90,8 +90,6 @@ source "drivers/staging/clocking-wizard/Kconfig"
source "drivers/staging/fbtft/Kconfig"
-source "drivers/staging/fsl-mc/Kconfig"
-
source "drivers/staging/fsl-dpaa2/Kconfig"
source "drivers/staging/wilc1000/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index ad7b4ca412ef..ab0cbe8815b1 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -35,7 +35,6 @@ obj-$(CONFIG_GS_FPGABOOT) += gs_fpgaboot/
obj-$(CONFIG_UNISYSSPAR) += unisys/
obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/
obj-$(CONFIG_FB_TFT) += fbtft/
-obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
obj-$(CONFIG_FSL_DPAA2) += fsl-dpaa2/
obj-$(CONFIG_WILC1000) += wilc1000/
obj-$(CONFIG_MOST) += most/
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
index e2dac44eccbe..9329fcad95ac 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
@@ -426,7 +426,7 @@ static int build_sg_fd(struct dpaa2_eth_priv *priv,
dpaa2_fd_set_format(fd, dpaa2_fd_sg);
dpaa2_fd_set_addr(fd, addr);
dpaa2_fd_set_len(fd, skb->len);
- dpaa2_fd_set_ctrl(fd, DPAA2_FD_CTRL_PTA | DPAA2_FD_CTRL_PTV1);
+ dpaa2_fd_set_ctrl(fd, FD_CTRL_PTA | FD_CTRL_PTV1);
if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
enable_tx_tstamp(fd, sgt_buf);
@@ -479,7 +479,7 @@ static int build_single_fd(struct dpaa2_eth_priv *priv,
dpaa2_fd_set_offset(fd, (u16)(skb->data - buffer_start));
dpaa2_fd_set_len(fd, skb->len);
dpaa2_fd_set_format(fd, dpaa2_fd_single);
- dpaa2_fd_set_ctrl(fd, DPAA2_FD_CTRL_PTA | DPAA2_FD_CTRL_PTV1);
+ dpaa2_fd_set_ctrl(fd, FD_CTRL_PTA | FD_CTRL_PTV1);
if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
enable_tx_tstamp(fd, buffer_start);
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
index 506466778b2c..d54cb0b99d08 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
@@ -10,8 +10,8 @@
#include <linux/if_vlan.h>
#include <linux/fsl/mc.h>
-#include "../../fsl-mc/include/dpaa2-io.h"
-#include "../../fsl-mc/include/dpaa2-fd.h"
+#include <soc/fsl/dpaa2-io.h>
+#include <soc/fsl/dpaa2-fd.h>
#include "dpni.h"
#include "dpni-cmd.h"
@@ -97,21 +97,13 @@ struct dpaa2_eth_swa {
#define DPAA2_FD_FRC_FAICFDV 0x0400
/* Error bits in FD CTRL */
-#define DPAA2_FD_CTRL_UFD 0x00000004
-#define DPAA2_FD_CTRL_SBE 0x00000008
-#define DPAA2_FD_CTRL_FSE 0x00000020
-#define DPAA2_FD_CTRL_FAERR 0x00000040
-
-#define DPAA2_FD_RX_ERR_MASK (DPAA2_FD_CTRL_SBE | \
- DPAA2_FD_CTRL_FAERR)
-#define DPAA2_FD_TX_ERR_MASK (DPAA2_FD_CTRL_UFD | \
- DPAA2_FD_CTRL_SBE | \
- DPAA2_FD_CTRL_FSE | \
- DPAA2_FD_CTRL_FAERR)
+#define DPAA2_FD_RX_ERR_MASK (FD_CTRL_SBE | FD_CTRL_FAERR)
+#define DPAA2_FD_TX_ERR_MASK (FD_CTRL_UFD | \
+ FD_CTRL_SBE | \
+ FD_CTRL_FSE | \
+ FD_CTRL_FAERR)
/* Annotation bits in FD CTRL */
-#define DPAA2_FD_CTRL_PTA 0x00800000
-#define DPAA2_FD_CTRL_PTV1 0x00400000
#define DPAA2_FD_CTRL_ASAL 0x00020000 /* ASAL = 128B */
/* Frame annotation status */
diff --git a/drivers/staging/fsl-mc/Kconfig b/drivers/staging/fsl-mc/Kconfig
deleted file mode 100644
index 3002229bec1b..000000000000
--- a/drivers/staging/fsl-mc/Kconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-source "drivers/staging/fsl-mc/bus/Kconfig"
diff --git a/drivers/staging/fsl-mc/Makefile b/drivers/staging/fsl-mc/Makefile
deleted file mode 100644
index 14683889dabd..000000000000
--- a/drivers/staging/fsl-mc/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Freescale Management Complex (MC) bus drivers
-obj-$(CONFIG_FSL_MC_BUS) += bus/
diff --git a/drivers/staging/fsl-mc/bus/Kconfig b/drivers/staging/fsl-mc/bus/Kconfig
deleted file mode 100644
index 342453035269..000000000000
--- a/drivers/staging/fsl-mc/bus/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# DPAA2 fsl-mc bus
-#
-# Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
-#
-
-config FSL_MC_DPIO
- tristate "QorIQ DPAA2 DPIO driver"
- depends on FSL_MC_BUS
- help
- Driver for the DPAA2 DPIO object. A DPIO provides queue and
- buffer management facilities for software to interact with
- other DPAA2 objects. This driver does not expose the DPIO
- objects individually, but groups them under a service layer
- API.
diff --git a/drivers/staging/fsl-mc/bus/Makefile b/drivers/staging/fsl-mc/bus/Makefile
deleted file mode 100644
index 21d8ebc8ce21..000000000000
--- a/drivers/staging/fsl-mc/bus/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Freescale Management Complex (MC) bus drivers
-#
-# Copyright (C) 2014 Freescale Semiconductor, Inc.
-#
-
-# MC DPIO driver
-obj-$(CONFIG_FSL_MC_DPIO) += dpio/
diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig
index 0126de898036..3c59e19029be 100644
--- a/drivers/tee/optee/Kconfig
+++ b/drivers/tee/optee/Kconfig
@@ -5,3 +5,11 @@ config OPTEE
help
This implements the OP-TEE Trusted Execution Environment (TEE)
driver.
+
+config OPTEE_SHM_NUM_PRIV_PAGES
+ int "Private Shared Memory Pages"
+ default 1
+ depends on OPTEE
+ help
+ This sets the number of private shared memory pages to be
+ used by OP-TEE TEE driver.
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index e5fd5ed217da..e1aafe842d66 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -32,7 +32,7 @@
#define DRIVER_NAME "optee"
-#define OPTEE_SHM_NUM_PRIV_PAGES 1
+#define OPTEE_SHM_NUM_PRIV_PAGES CONFIG_OPTEE_SHM_NUM_PRIV_PAGES
/**
* optee_from_msg_param() - convert from OPTEE_MSG parameters to
diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
index 41aea12e2bcc..b45c73dd37a5 100644
--- a/drivers/tee/optee/rpc.c
+++ b/drivers/tee/optee/rpc.c
@@ -48,7 +48,7 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT)
goto bad;
- getnstimeofday64(&ts);
+ ktime_get_real_ts64(&ts);
arg->params[0].u.value.a = ts.tv_sec;
arg->params[0].u.value.b = ts.tv_nsec;
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index d9145a8f35d2..8e3bab1e0c1f 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -161,16 +161,10 @@ static int exynos_ehci_probe(struct platform_device *pdev)
}
exynos_ehci = to_exynos_ehci(hcd);
- if (of_device_is_compatible(pdev->dev.of_node,
- "samsung,exynos5440-ehci"))
- goto skip_phy;
-
err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci);
if (err)
goto fail_clk;
-skip_phy:
-
exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
if (IS_ERR(exynos_ehci->clk)) {
@@ -304,7 +298,6 @@ static const struct dev_pm_ops exynos_ehci_pm_ops = {
#ifdef CONFIG_OF
static const struct of_device_id exynos_ehci_match[] = {
{ .compatible = "samsung,exynos4210-ehci" },
- { .compatible = "samsung,exynos5440-ehci" },
{},
};
MODULE_DEVICE_TABLE(of, exynos_ehci_match);
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index a39fae41bc70..c0c4dcca6f3c 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -130,15 +130,10 @@ static int exynos_ohci_probe(struct platform_device *pdev)
exynos_ohci = to_exynos_ohci(hcd);
- if (of_device_is_compatible(pdev->dev.of_node,
- "samsung,exynos5440-ohci"))
- goto skip_phy;
-
err = exynos_ohci_get_phy(&pdev->dev, exynos_ohci);
if (err)
goto fail_clk;
-skip_phy:
exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
if (IS_ERR(exynos_ohci->clk)) {
@@ -270,7 +265,6 @@ static const struct dev_pm_ops exynos_ohci_pm_ops = {
#ifdef CONFIG_OF
static const struct of_device_id exynos_ohci_match[] = {
{ .compatible = "samsung,exynos4210-ohci" },
- { .compatible = "samsung,exynos5440-ohci" },
{},
};
MODULE_DEVICE_TABLE(of, exynos_ohci_match);
diff --git a/include/dt-bindings/bus/ti-sysc.h b/include/dt-bindings/bus/ti-sysc.h
index 2c005376ac0e..7138384e2ef9 100644
--- a/include/dt-bindings/bus/ti-sysc.h
+++ b/include/dt-bindings/bus/ti-sysc.h
@@ -15,6 +15,8 @@
/* SmartReflex sysc found on 36xx and later */
#define SYSC_OMAP3_SR_ENAWAKEUP (1 << 26)
+#define SYSC_DRA7_MCAN_ENAWAKEUP (1 << 4)
+
/* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */
#define SYSC_IDLE_FORCE 0
#define SYSC_IDLE_NO 1
diff --git a/include/dt-bindings/clock/dra7.h b/include/dt-bindings/clock/dra7.h
index 5e1061b15aed..d7549c57cac3 100644
--- a/include/dt-bindings/clock/dra7.h
+++ b/include/dt-bindings/clock/dra7.h
@@ -168,5 +168,6 @@
#define DRA7_COUNTER_32K_CLKCTRL DRA7_CLKCTRL_INDEX(0x50)
#define DRA7_UART10_CLKCTRL DRA7_CLKCTRL_INDEX(0x80)
#define DRA7_DCAN1_CLKCTRL DRA7_CLKCTRL_INDEX(0x88)
+#define DRA7_ADC_CLKCTRL DRA7_CLKCTRL_INDEX(0xa0)
#endif
diff --git a/include/dt-bindings/clock/exynos5440.h b/include/dt-bindings/clock/exynos5440.h
deleted file mode 100644
index 842cdc0adff1..000000000000
--- a/include/dt-bindings/clock/exynos5440.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Hajda <a.hajda@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Device Tree binding constants for Exynos5440 clock controller.
-*/
-
-#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5440_H
-#define _DT_BINDINGS_CLOCK_EXYNOS_5440_H
-
-#define CLK_XTAL 1
-#define CLK_ARM_CLK 2
-#define CLK_CPLLA 3
-#define CLK_CPLLB 4
-#define CLK_SPI_BAUD 16
-#define CLK_PB0_250 17
-#define CLK_PR0_250 18
-#define CLK_PR1_250 19
-#define CLK_B_250 20
-#define CLK_B_125 21
-#define CLK_B_200 22
-#define CLK_SATA 23
-#define CLK_USB 24
-#define CLK_GMAC0 25
-#define CLK_CS250 26
-#define CLK_PB0_250_O 27
-#define CLK_PR0_250_O 28
-#define CLK_PR1_250_O 29
-#define CLK_B_250_O 30
-#define CLK_B_125_O 31
-#define CLK_B_200_O 32
-#define CLK_SATA_O 33
-#define CLK_USB_O 34
-#define CLK_GMAC0_O 35
-#define CLK_CS250_O 36
-
-/* must be greater than maximal clock id */
-#define CLK_NR_CLKS 37
-
-#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5440_H */
diff --git a/include/dt-bindings/reset/qcom,sdm845-aoss.h b/include/dt-bindings/reset/qcom,sdm845-aoss.h
new file mode 100644
index 000000000000..476c5fc873b6
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,sdm845-aoss.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_AOSS_SDM_845_H
+#define _DT_BINDINGS_RESET_AOSS_SDM_845_H
+
+#define AOSS_CC_MSS_RESTART 0
+#define AOSS_CC_CAMSS_RESTART 1
+#define AOSS_CC_VENUS_RESTART 2
+#define AOSS_CC_GPU_RESTART 3
+#define AOSS_CC_DISPSS_RESTART 4
+#define AOSS_CC_WCSS_RESTART 5
+#define AOSS_CC_LPASS_RESTART 6
+
+#endif
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index 990aad477458..2efa3470a451 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -14,6 +14,7 @@ enum ti_sysc_module_type {
TI_SYSC_OMAP4_SR,
TI_SYSC_OMAP4_MCASP,
TI_SYSC_OMAP4_USB_HOST_FS,
+ TI_SYSC_DRA7_MCAN,
};
struct ti_sysc_cookie {
diff --git a/include/linux/wkup_m3_ipc.h b/include/linux/wkup_m3_ipc.h
index d6ba7d39a62f..e497e621dbb7 100644
--- a/include/linux/wkup_m3_ipc.h
+++ b/include/linux/wkup_m3_ipc.h
@@ -40,6 +40,12 @@ struct wkup_m3_ipc {
struct mbox_chan *mbox;
struct wkup_m3_ipc_ops *ops;
+ int is_rtc_only;
+};
+
+struct wkup_m3_wakeup_src {
+ int irq_nr;
+ char src[10];
};
struct wkup_m3_ipc_ops {
@@ -48,8 +54,11 @@ struct wkup_m3_ipc_ops {
int (*prepare_low_power)(struct wkup_m3_ipc *m3_ipc, int state);
int (*finish_low_power)(struct wkup_m3_ipc *m3_ipc);
int (*request_pm_status)(struct wkup_m3_ipc *m3_ipc);
+ const char *(*request_wake_src)(struct wkup_m3_ipc *m3_ipc);
+ void (*set_rtc_only)(struct wkup_m3_ipc *m3_ipc);
};
struct wkup_m3_ipc *wkup_m3_ipc_get(void);
void wkup_m3_ipc_put(struct wkup_m3_ipc *m3_ipc);
+void wkup_m3_set_rtc_only_mode(void);
#endif /* _LINUX_WKUP_M3_IPC_H */
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 8ee8991aa099..c4a5c9e9fb47 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -75,6 +75,7 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020,
RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021,
RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030,
+ RPI_FIRMWARE_GET_THROTTLED = 0x00030046,
RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001,
RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002,
RPI_FIRMWARE_SET_VOLTAGE = 0x00038003,
diff --git a/drivers/staging/fsl-mc/include/dpaa2-fd.h b/include/soc/fsl/dpaa2-fd.h
index b55b89ba4eda..2576abaa7779 100644
--- a/drivers/staging/fsl-mc/include/dpaa2-fd.h
+++ b/include/soc/fsl/dpaa2-fd.h
@@ -67,6 +67,18 @@ struct dpaa2_fd {
#define SG_FINAL_FLAG_MASK 0x1
#define SG_FINAL_FLAG_SHIFT 15
+/* Error bits in FD CTRL */
+#define FD_CTRL_ERR_MASK 0x000000FF
+#define FD_CTRL_UFD 0x00000004
+#define FD_CTRL_SBE 0x00000008
+#define FD_CTRL_FLC 0x00000010
+#define FD_CTRL_FSE 0x00000020
+#define FD_CTRL_FAERR 0x00000040
+
+/* Annotation bits in FD CTRL */
+#define FD_CTRL_PTA 0x00800000
+#define FD_CTRL_PTV1 0x00400000
+
enum dpaa2_fd_format {
dpaa2_fd_single = 0,
dpaa2_fd_list,
diff --git a/drivers/staging/fsl-mc/include/dpaa2-global.h b/include/soc/fsl/dpaa2-global.h
index 9bc0713346a8..9bc0713346a8 100644
--- a/drivers/staging/fsl-mc/include/dpaa2-global.h
+++ b/include/soc/fsl/dpaa2-global.h
diff --git a/drivers/staging/fsl-mc/include/dpaa2-io.h b/include/soc/fsl/dpaa2-io.h
index ab51e40d11db..ab51e40d11db 100644
--- a/drivers/staging/fsl-mc/include/dpaa2-io.h
+++ b/include/soc/fsl/dpaa2-io.h