summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt15
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--arch/arm/boot/dts/integratorap.dts41
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c11
-rw-r--r--arch/arm/mach-integrator/pci_v3.c177
5 files changed, 209 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
new file mode 100644
index 000000000000..30b364e504ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
@@ -0,0 +1,15 @@
+V3 Semiconductor V360 EPC PCI bridge
+
+This bridge is found in the ARM Integrator/AP (Application Platform)
+
+Integrator-specific notes:
+
+- syscon: should contain a link to the syscon device node (since
+ on the Integrator, some registers in the syscon are required to
+ operate the V3).
+
+V360 EPC specific notes:
+
+- reg: should contain the base address of the V3 adapter.
+- interrupts: should contain a reference to the V3 error interrupt
+ as routed on the system.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6931c4348d24..d247d1003987 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -59,6 +59,7 @@ ste ST-Ericsson
stericsson ST-Ericsson
ti Texas Instruments
toshiba Toshiba Corporation
+v3 V3 Semiconductor
via VIA Technologies, Inc.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index c9c3fa344647..03f23b7a0ab5 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -39,6 +39,47 @@
valid-mask = <0x003fffff>;
};
+ pci: pciv3@62000000 {
+ compatible = "v3,v360epc-pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x62000000 0x10000>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>; /* Bus error IRQ */
+ ranges = <0x00000000 0 0x61000000 /* config space */
+ 0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */
+ 0x01000000 0 0x60000000 /* I/O space */
+ 0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */
+ 0x02000000 0 0x40000000 /* non-prefectable memory */
+ 0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */
+ 0x42000000 0 0x50000000 /* prefetchable memory */
+ 0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <
+ /* IDSEL 9 */
+ 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+ 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+ 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+ 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+ /* IDSEL 10 */
+ 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+ 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+ 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+ 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+ /* IDSEL 11 */
+ 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+ 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+ 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+ 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+ /* IDSEL 12 */
+ 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+ 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+ 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+ 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+ >;
+ };
+
fpga {
/*
* The Integator/AP predates the idea to have magic numbers
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 16f3196efdb4..a5b15c4e8def 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -473,15 +473,6 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
{ /* sentinel */ },
};
-/*
- * This is a placeholder that will get deleted when we move the PCI
- * device over to the device tree.
- */
-static struct platform_device pci_v3_device_of = {
- .name = "pci-v3",
- .id = 0,
-};
-
static void __init ap_init_of(void)
{
unsigned long sc_dec;
@@ -536,8 +527,6 @@ static void __init ap_init_of(void)
of_platform_populate(root, of_default_bus_match_table,
ap_auxdata_lookup, parent);
- platform_device_register(&pci_v3_device_of);
-
sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
for (i = 0; i < 4; i++) {
struct lm_device *lmdev;
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index a3cefdebd136..a0e069d37e14 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -28,6 +28,10 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
#include <video/vga.h>
#include <mach/hardware.h>
@@ -279,7 +283,12 @@
* the mappings into PCI memory.
*/
+/* Filled in by probe */
static void __iomem *pci_v3_base;
+static struct resource conf_mem; /* FIXME: remap this instead of static map */
+static struct resource io_mem;
+static struct resource non_mem;
+static struct resource pre_mem;
// V3 access routines
#define v3_writeb(o,v) __raw_writeb(v, pci_v3_base + (unsigned int)(o))
@@ -423,13 +432,13 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus,
* prefetchable), this frees up base1 for re-use by
* configuration memory
*/
- v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) |
+ v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE);
/*
* Set up base1/map1 to point into configuration space.
*/
- v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_CONFIG_BASE) |
+ v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) |
V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP1, mapaddress);
@@ -441,7 +450,7 @@ static void v3_close_config_window(void)
/*
* Reassign base1 for use by prefetchable PCI memory
*/
- v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) |
+ v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) |
@@ -450,7 +459,7 @@ static void v3_close_config_window(void)
/*
* And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
*/
- v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) |
+ v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
}
@@ -522,20 +531,6 @@ static struct pci_ops pci_v3_ops = {
.write = v3_write_config,
};
-static struct resource non_mem = {
- .name = "PCI non-prefetchable",
- .start = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START,
- .end = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource pre_mem = {
- .name = "PCI prefetchable",
- .start = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START,
- .end = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START + PCI_BUS_PREMEM_SIZE - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH,
-};
-
static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
{
if (request_resource(&iomem_resource, &non_mem)) {
@@ -659,7 +654,7 @@ static int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
return -EINVAL;
if (nr == 0) {
- sys->mem_offset = PHYS_PCI_MEM_BASE;
+ sys->mem_offset = non_mem.start;
ret = pci_v3_setup_resources(sys);
}
@@ -697,7 +692,7 @@ static void __init pci_v3_preinit(void)
* Setup window 0 - PCI non-prefetchable memory
* Local: 0x40000000 Bus: 0x00000000 Size: 256MB
*/
- v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) |
+ v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(PCI_BUS_NONMEM_START) |
V3_LB_MAP_TYPE_MEM);
@@ -706,7 +701,7 @@ static void __init pci_v3_preinit(void)
* Setup window 1 - PCI prefetchable memory
* Local: 0x50000000 Bus: 0x10000000 Size: 256MB
*/
- v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) |
+ v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) |
@@ -715,7 +710,7 @@ static void __init pci_v3_preinit(void)
/*
* Setup window 2 - PCI IO
*/
- v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(PHYS_PCI_IO_BASE) |
+ v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) |
V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
@@ -772,7 +767,7 @@ static void __init pci_v3_postinit(void)
"interrupt: %d\n", ret);
#endif
- register_isa_ports(PHYS_PCI_MEM_BASE, PHYS_PCI_IO_BASE, 0);
+ register_isa_ports(non_mem.start, io_mem.start, 0);
}
/*
@@ -837,7 +832,6 @@ static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
static struct hw_pci pci_v3 __initdata = {
.swizzle = pci_v3_swizzle,
- .map_irq = pci_v3_map_irq,
.setup = pci_v3_setup,
.nr_controllers = 1,
.ops = &pci_v3_ops,
@@ -845,8 +839,107 @@ static struct hw_pci pci_v3 __initdata = {
.postinit = pci_v3_postinit,
};
+#ifdef CONFIG_OF
+
+static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct of_irq oirq;
+ int ret;
+
+ ret = of_irq_map_pci(dev, &oirq);
+ if (ret) {
+ dev_err(&dev->dev, "of_irq_map_pci() %d\n", ret);
+ /* Proper return code 0 == NO_IRQ */
+ return 0;
+ }
+
+ return irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+}
+
+static int __init pci_v3_dtprobe(struct platform_device *pdev,
+ struct device_node *np)
+{
+ struct of_pci_range_parser parser;
+ struct of_pci_range range;
+ struct resource *res;
+ int irq, ret;
+
+ if (of_pci_range_parser_init(&parser, np))
+ return -EINVAL;
+
+ /* Get base for bridge registers */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "unable to obtain PCIv3 base\n");
+ return -ENODEV;
+ }
+ pci_v3_base = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!pci_v3_base) {
+ dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
+ return -ENODEV;
+ }
+
+ /* Get and request error IRQ resource */
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev, "unable to obtain PCIv3 error IRQ\n");
+ return -ENODEV;
+ }
+ ret = devm_request_irq(&pdev->dev, irq, v3_irq, 0,
+ "PCIv3 error", NULL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to request PCIv3 error IRQ %d (%d)\n", irq, ret);
+ return ret;
+ }
+
+ for_each_of_pci_range(&parser, &range) {
+ if (!range.flags) {
+ of_pci_range_to_resource(&range, np, &conf_mem);
+ conf_mem.name = "PCIv3 config";
+ }
+ if (range.flags & IORESOURCE_IO) {
+ of_pci_range_to_resource(&range, np, &io_mem);
+ io_mem.name = "PCIv3 I/O";
+ }
+ if ((range.flags & IORESOURCE_MEM) &&
+ !(range.flags & IORESOURCE_PREFETCH)) {
+ of_pci_range_to_resource(&range, np, &non_mem);
+ non_mem.name = "PCIv3 non-prefetched mem";
+ }
+ if ((range.flags & IORESOURCE_MEM) &&
+ (range.flags & IORESOURCE_PREFETCH)) {
+ of_pci_range_to_resource(&range, np, &pre_mem);
+ pre_mem.name = "PCIv3 prefetched mem";
+ }
+ }
+
+ if (!conf_mem.start || !io_mem.start ||
+ !non_mem.start || !pre_mem.start) {
+ dev_err(&pdev->dev, "missing ranges in device node\n");
+ return -EINVAL;
+ }
+
+ pci_v3.map_irq = pci_v3_map_irq_dt;
+ pci_common_init_dev(&pdev->dev, &pci_v3);
+
+ return 0;
+}
+
+#else
+
+static inline int pci_v3_dtprobe(struct platform_device *pdev,
+ struct device_node *np)
+{
+ return -EINVAL;
+}
+
+#endif
+
static int __init pci_v3_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
int ret;
/* Remap the Integrator system controller */
@@ -856,6 +949,10 @@ static int __init pci_v3_probe(struct platform_device *pdev)
return -ENODEV;
}
+ /* Device tree probe path */
+ if (np)
+ return pci_v3_dtprobe(pdev, np);
+
pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K);
if (!pci_v3_base) {
dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
@@ -869,14 +966,44 @@ static int __init pci_v3_probe(struct platform_device *pdev)
return -ENODEV;
}
- pci_common_init(&pci_v3);
+ conf_mem.name = "PCIv3 config";
+ conf_mem.start = PHYS_PCI_CONFIG_BASE;
+ conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1;
+ conf_mem.flags = IORESOURCE_MEM;
+
+ io_mem.name = "PCIv3 I/O";
+ io_mem.start = PHYS_PCI_IO_BASE;
+ io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1;
+ io_mem.flags = IORESOURCE_MEM;
+
+ non_mem.name = "PCIv3 non-prefetched mem";
+ non_mem.start = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START;
+ non_mem.end = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START +
+ PCI_BUS_NONMEM_SIZE - 1;
+ non_mem.flags = IORESOURCE_MEM;
+
+ pre_mem.name = "PCIv3 prefetched mem";
+ pre_mem.start = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START;
+ pre_mem.end = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START +
+ PCI_BUS_PREMEM_SIZE - 1;
+ pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+
+ pci_v3.map_irq = pci_v3_map_irq;
+
+ pci_common_init_dev(&pdev->dev, &pci_v3);
return 0;
}
+static const struct of_device_id pci_ids[] = {
+ { .compatible = "v3,v360epc-pci", },
+ {},
+};
+
static struct platform_driver pci_v3_driver = {
.driver = {
.name = "pci-v3",
+ .of_match_table = pci_ids,
},
};