summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-class-mtd51
-rw-r--r--Documentation/DocBook/mtdnand.tmpl2
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmi-nand.txt33
-rw-r--r--Documentation/devicetree/bindings/mtd/mxc-nand.txt19
-rw-r--r--arch/arm/boot/dts/imx27.dtsi9
-rw-r--r--arch/arm/mach-ep93xx/snappercl15.c4
-rw-r--r--arch/arm/mach-ep93xx/ts72xx.c3
-rw-r--r--arch/arm/mach-imx/imx27-dt.c1
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c4
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c2
-rw-r--r--arch/arm/mach-omap1/board-fsample.c3
-rw-r--r--arch/arm/mach-omap1/board-h2.c3
-rw-r--r--arch/arm/mach-omap1/board-h3.c3
-rw-r--r--arch/arm/mach-omap1/board-perseus2.c3
-rw-r--r--arch/arm/mach-omap2/gpmc.c184
-rw-r--r--arch/arm/mach-orion5x/ts78xx-setup.c3
-rw-r--r--arch/arm/mach-pxa/balloon3.c3
-rw-r--r--arch/arm/mach-pxa/em-x270.c3
-rw-r--r--arch/arm/mach-pxa/palmtx.c3
-rw-r--r--arch/arm/plat-omap/include/plat/gpmc.h11
-rw-r--r--arch/blackfin/mach-bf561/boards/acvilon.c3
-rw-r--r--arch/mips/alchemy/devboards/db1200.c3
-rw-r--r--arch/mips/alchemy/devboards/db1300.c3
-rw-r--r--arch/mips/alchemy/devboards/db1550.c3
-rw-r--r--arch/mips/pnx833x/common/platform.c6
-rw-r--r--arch/mips/rb532/devices.c1
-rw-r--r--arch/sh/boards/mach-migor/setup.c1
-rw-r--r--drivers/mtd/Kconfig2
-rw-r--r--drivers/mtd/bcm63xxpart.c41
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c18
-rw-r--r--drivers/mtd/cmdlinepart.c2
-rw-r--r--drivers/mtd/devices/block2mtd.c7
-rw-r--r--drivers/mtd/devices/docg3.c40
-rw-r--r--drivers/mtd/devices/m25p80.c5
-rw-r--r--drivers/mtd/devices/spear_smi.c14
-rw-r--r--drivers/mtd/lpddr/qinfo_probe.c2
-rw-r--r--drivers/mtd/maps/Kconfig2
-rw-r--r--drivers/mtd/maps/intel_vr_nor.c13
-rw-r--r--drivers/mtd/maps/pci.c13
-rw-r--r--drivers/mtd/maps/scb2_flash.c15
-rw-r--r--drivers/mtd/maps/wr_sbc82xx_flash.c2
-rw-r--r--drivers/mtd/mtdcore.c57
-rw-r--r--drivers/mtd/mtdpart.c14
-rw-r--r--drivers/mtd/nand/Kconfig42
-rw-r--r--drivers/mtd/nand/alauda.c4
-rw-r--r--drivers/mtd/nand/atmel_nand.c14
-rw-r--r--drivers/mtd/nand/au1550nd.c2
-rw-r--r--drivers/mtd/nand/bcm_umi_bch.c14
-rw-r--r--drivers/mtd/nand/bcm_umi_nand.c9
-rw-r--r--drivers/mtd/nand/bf5xx_nand.c4
-rw-r--r--drivers/mtd/nand/cafe_nand.c35
-rw-r--r--drivers/mtd/nand/cs553x_nand.c1
-rw-r--r--drivers/mtd/nand/denali.c38
-rw-r--r--drivers/mtd/nand/docg4.c22
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c37
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c47
-rw-r--r--drivers/mtd/nand/fsmc_nand.c26
-rw-r--r--drivers/mtd/nand/gpmi-nand/bch-regs.h42
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c27
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c184
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.h6
-rw-r--r--drivers/mtd/nand/h1910.c1
-rw-r--r--drivers/mtd/nand/jz4740_nand.c6
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c1
-rw-r--r--drivers/mtd/nand/mxc_nand.c636
-rw-r--r--drivers/mtd/nand/nand_base.c233
-rw-r--r--drivers/mtd/nand/nand_bbt.c1
-rw-r--r--drivers/mtd/nand/nand_ids.c6
-rw-r--r--drivers/mtd/nand/nandsim.c28
-rw-r--r--drivers/mtd/nand/omap2.c253
-rw-r--r--drivers/mtd/nand/pasemi_nand.c1
-rw-r--r--drivers/mtd/nand/plat_nand.c28
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c6
-rw-r--r--drivers/mtd/nand/r852.c22
-rw-r--r--drivers/mtd/nand/sh_flctl.c8
-rw-r--r--drivers/mtd/nand/sm_common.c9
-rw-r--r--drivers/mtd/onenand/onenand_base.c6
-rw-r--r--fs/jffs2/jffs2_fs_sb.h7
-rw-r--r--fs/jffs2/nodemgmt.c42
-rw-r--r--fs/jffs2/readinode.c19
-rw-r--r--fs/jffs2/super.c17
-rw-r--r--fs/jffs2/xattr.c23
-rw-r--r--fs/jffs2/xattr.h2
-rw-r--r--include/linux/mtd/gpmi-nand.h8
-rw-r--r--include/linux/mtd/mtd.h11
-rw-r--r--include/linux/mtd/nand.h25
86 files changed, 1775 insertions, 792 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index 4d55a1888981..db1ad7e34fc3 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -123,3 +123,54 @@ Description:
half page, or a quarter page).
In the case of ECC NOR, it is the ECC block size.
+
+What: /sys/class/mtd/mtdX/ecc_strength
+Date: April 2012
+KernelVersion: 3.4
+Contact: linux-mtd@lists.infradead.org
+Description:
+ Maximum number of bit errors that the device is capable of
+ correcting within each region covering an ecc step. This will
+ always be a non-negative integer. Note that some devices will
+ have multiple ecc steps within each writesize region.
+
+ In the case of devices lacking any ECC capability, it is 0.
+
+What: /sys/class/mtd/mtdX/bitflip_threshold
+Date: April 2012
+KernelVersion: 3.4
+Contact: linux-mtd@lists.infradead.org
+Description:
+ This allows the user to examine and adjust the criteria by which
+ mtd returns -EUCLEAN from mtd_read(). If the maximum number of
+ bit errors that were corrected on any single region comprising
+ an ecc step (as reported by the driver) equals or exceeds this
+ value, -EUCLEAN is returned. Otherwise, absent an error, 0 is
+ returned. Higher layers (e.g., UBI) use this return code as an
+ indication that an erase block may be degrading and should be
+ scrutinized as a candidate for being marked as bad.
+
+ The initial value may be specified by the flash device driver.
+ If not, then the default value is ecc_strength.
+
+ The introduction of this feature brings a subtle change to the
+ meaning of the -EUCLEAN return code. Previously, it was
+ interpreted to mean simply "one or more bit errors were
+ corrected". Its new interpretation can be phrased as "a
+ dangerously high number of bit errors were corrected on one or
+ more regions comprising an ecc step". The precise definition of
+ "dangerously high" can be adjusted by the user with
+ bitflip_threshold. Users are discouraged from doing this,
+ however, unless they know what they are doing and have intimate
+ knowledge of the properties of their device. Broadly speaking,
+ bitflip_threshold should be low enough to detect genuine erase
+ block degradation, but high enough to avoid the consequences of
+ a persistent return value of -EUCLEAN on devices where sticky
+ bitflips occur. Note that if bitflip_threshold exceeds
+ ecc_strength, -EUCLEAN is never returned by mtd_read().
+ Conversely, if bitflip_threshold is zero, -EUCLEAN is always
+ returned, absent a hard error.
+
+ This is generally applicable only to NAND flash devices with ECC
+ capability. It is ignored on devices lacking ECC capability;
+ i.e., devices for which ecc_strength is zero.
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 0c674be0d3c6..e0aedb7a7827 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -1119,8 +1119,6 @@ in this page</entry>
These constants are defined in nand.h. They are ored together to describe
the chip functionality.
<programlisting>
-/* Chip can not auto increment pages */
-#define NAND_NO_AUTOINCR 0x00000001
/* Buswitdh is 16 bit */
#define NAND_BUSWIDTH_16 0x00000002
/* Device supports partial programming without padding */
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
new file mode 100644
index 000000000000..1a5bbd346d22
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -0,0 +1,33 @@
+* Freescale General-Purpose Media Interface (GPMI)
+
+The GPMI nand controller provides an interface to control the
+NAND flash chips. We support only one NAND chip now.
+
+Required properties:
+ - compatible : should be "fsl,<chip>-gpmi-nand"
+ - reg : should contain registers location and length for gpmi and bch.
+ - reg-names: Should contain the reg names "gpmi-nand" and "bch"
+ - interrupts : The first is the DMA interrupt number for GPMI.
+ The second is the BCH interrupt number.
+ - interrupt-names : The interrupt names "gpmi-dma", "bch";
+ - fsl,gpmi-dma-channel : Should contain the dma channel it uses.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Examples:
+
+gpmi-nand@8000c000 {
+ compatible = "fsl,imx28-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <88>, <41>;
+ interrupt-names = "gpmi-dma", "bch";
+ fsl,gpmi-dma-channel = <4>;
+
+ partition@0 {
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.txt b/Documentation/devicetree/bindings/mtd/mxc-nand.txt
new file mode 100644
index 000000000000..b5833d11c7be
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxc-nand.txt
@@ -0,0 +1,19 @@
+* Freescale's mxc_nand
+
+Required properties:
+- compatible: "fsl,imxXX-nand"
+- reg: address range of the nfc block
+- interrupts: irq to be used
+- nand-bus-width: see nand.txt
+- nand-ecc-mode: see nand.txt
+- nand-on-flash-bbt: see nand.txt
+
+Example:
+
+ nand@d8000000 {
+ compatible = "fsl,imx27-nand";
+ reg = <0xd8000000 0x1000>;
+ interrupts = <29>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ };
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 2b1a166d41f9..386c769c38d1 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -213,5 +213,14 @@
status = "disabled";
};
};
+ nand@d8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "fsl,imx27-nand";
+ reg = <0xd8000000 0x1000>;
+ interrupts = <29>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index eb282378fa78..01abd3516a77 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -82,8 +82,6 @@ static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
}
-static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
-
static struct mtd_partition snappercl15_nand_parts[] = {
{
.name = "Kernel",
@@ -100,10 +98,8 @@ static struct mtd_partition snappercl15_nand_parts[] = {
static struct platform_nand_data snappercl15_nand_data = {
.chip = {
.nr_chips = 1,
- .part_probe_types = snappercl15_nand_part_probes,
.partitions = snappercl15_nand_parts,
.nr_partitions = ARRAY_SIZE(snappercl15_nand_parts),
- .options = NAND_NO_AUTOINCR,
.chip_delay = 25,
},
.ctrl = {
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index d4ef339d961e..75cab2d7ec73 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -105,8 +105,6 @@ static int ts72xx_nand_device_ready(struct mtd_info *mtd)
return !!(__raw_readb(addr) & 0x20);
}
-static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL };
-
#define TS72XX_BOOTROM_PART_SIZE (SZ_16K)
#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M)
@@ -134,7 +132,6 @@ static struct platform_nand_data ts72xx_nand_data = {
.nr_chips = 1,
.chip_offset = 0,
.chip_delay = 15,
- .part_probe_types = ts72xx_nand_part_probes,
.partitions = ts72xx_nand_parts,
.nr_partitions = ARRAY_SIZE(ts72xx_nand_parts),
},
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index ed38d03c61f2..eee0cc8d92a4 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -29,6 +29,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL),
OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL),
OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "mxc_nand.0", NULL),
{ /* sentinel */ }
};
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 3d742aee1773..108a9d3f382d 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -60,8 +60,6 @@ static struct platform_device ixdp425_flash = {
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-const char *part_probes[] = { "cmdlinepart", NULL };
-
static struct mtd_partition ixdp425_partitions[] = {
{
.name = "ixp400 NAND FS 0",
@@ -100,8 +98,6 @@ static struct platform_nand_data ixdp425_flash_nand_data = {
.chip = {
.nr_chips = 1,
.chip_delay = 30,
- .options = NAND_NO_AUTOINCR,
- .part_probe_types = part_probes,
.partitions = ixdp425_partitions,
.nr_partitions = ARRAY_SIZE(ixdp425_partitions),
},
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 58cacafcf662..2e8d3e176bc7 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -111,7 +111,7 @@ static struct nomadik_nand_platform_data nhk8815_nand_data = {
.parts = nhk8815_partitions,
.nparts = ARRAY_SIZE(nhk8815_partitions),
.options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
- | NAND_NO_READRDY | NAND_NO_AUTOINCR,
+ | NAND_NO_READRDY,
.init = nhk8815_nand_init,
};
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index c7364fdbda05..6872f3fd400f 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -192,14 +192,11 @@ static int nand_dev_ready(struct mtd_info *mtd)
return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static struct platform_nand_data nand_data = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.options = NAND_SAMSUNG_LP_OPTIONS,
- .part_probe_types = part_probes,
},
.ctrl = {
.cmd_ctrl = omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 7e503686f7af..a28e989a63f4 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -186,8 +186,6 @@ static int h2_nand_dev_ready(struct mtd_info *mtd)
return gpio_get_value(H2_NAND_RB_GPIO_PIN);
}
-static const char *h2_part_probes[] = { "cmdlinepart", NULL };
-
static struct platform_nand_data h2_nand_platdata = {
.chip = {
.nr_chips = 1,
@@ -195,7 +193,6 @@ static struct platform_nand_data h2_nand_platdata = {
.nr_partitions = ARRAY_SIZE(h2_nand_partitions),
.partitions = h2_nand_partitions,
.options = NAND_SAMSUNG_LP_OPTIONS,
- .part_probe_types = h2_part_probes,
},
.ctrl = {
.cmd_ctrl = omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 9fb03f189d93..108a8640fc6f 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -188,8 +188,6 @@ static int nand_dev_ready(struct mtd_info *mtd)
return gpio_get_value(H3_NAND_RB_GPIO_PIN);
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static struct platform_nand_data nand_platdata = {
.chip = {
.nr_chips = 1,
@@ -197,7 +195,6 @@ static struct platform_nand_data nand_platdata = {
.nr_partitions = ARRAY_SIZE(nand_partitions),
.partitions = nand_partitions,
.options = NAND_SAMSUNG_LP_OPTIONS,
- .part_probe_types = part_probes,
},
.ctrl = {
.cmd_ctrl = omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index f2cb24387c22..703d55ecffe2 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -150,14 +150,11 @@ static int nand_dev_ready(struct mtd_info *mtd)
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static struct platform_nand_data nand_data = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.options = NAND_SAMSUNG_LP_OPTIONS,
- .part_probe_types = part_probes,
},
.ctrl = {
.cmd_ctrl = omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 46b09dae770e..2286410671e7 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -49,6 +49,7 @@
#define GPMC_ECC_CONTROL 0x1f8
#define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200
+#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
/* GPMC ECC control settings */
#define GPMC_ECC_CTRL_ECCCLEAR 0x100
@@ -935,3 +936,186 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
return 0;
}
EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
+
+#ifdef CONFIG_ARCH_OMAP3
+
+/**
+ * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
+ * @cs: chip select number
+ * @nsectors: how many 512-byte sectors to process
+ * @nerrors: how many errors to correct per sector (4 or 8)
+ *
+ * This function must be executed before any call to gpmc_enable_hwecc_bch.
+ */
+int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
+{
+ /* check if ecc module is in use */
+ if (gpmc_ecc_used != -EINVAL)
+ return -EINVAL;
+
+ /* support only OMAP3 class */
+ if (!cpu_is_omap34xx()) {
+ printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
+ return -EINVAL;
+ }
+
+ /*
+ * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+ * Other chips may be added if confirmed to work.
+ */
+ if ((nerrors == 4) &&
+ (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+ printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
+ return -EINVAL;
+ }
+
+ /* sanity check */
+ if (nsectors > 8) {
+ printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
+ nsectors);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
+
+/**
+ * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
+ * @cs: chip select number
+ * @mode: read/write mode
+ * @dev_width: device bus width(1 for x16, 0 for x8)
+ * @nsectors: how many 512-byte sectors to process
+ * @nerrors: how many errors to correct per sector (4 or 8)
+ */
+int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
+ int nerrors)
+{
+ unsigned int val;
+
+ /* check if ecc module is in use */
+ if (gpmc_ecc_used != -EINVAL)
+ return -EINVAL;
+
+ gpmc_ecc_used = cs;
+
+ /* clear ecc and enable bits */
+ gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
+
+ /*
+ * When using BCH, sector size is hardcoded to 512 bytes.
+ * Here we are using wrapping mode 6 both for reading and writing, with:
+ * size0 = 0 (no additional protected byte in spare area)
+ * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+ */
+ gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
+
+ /* BCH configuration */
+ val = ((1 << 16) | /* enable BCH */
+ (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+ (0x06 << 8) | /* wrap mode = 6 */
+ (dev_width << 7) | /* bus width */
+ (((nsectors-1) & 0x7) << 4) | /* number of sectors */
+ (cs << 1) | /* ECC CS */
+ (0x1)); /* enable ECC */
+
+ gpmc_write_reg(GPMC_ECC_CONFIG, val);
+ gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
+
+/**
+ * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
+ * @cs: chip select number
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc: The ecc output buffer
+ */
+int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
+{
+ int i;
+ unsigned long nsectors, reg, val1, val2;
+
+ if (gpmc_ecc_used != cs)
+ return -EINVAL;
+
+ nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
+
+ /* Read hw-computed remainder */
+ val1 = gpmc_read_reg(reg + 0);
+ val2 = gpmc_read_reg(reg + 4);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs; and
+ * left-justify the resulting polynomial.
+ */
+ *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+ *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF);
+ *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+ *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+ *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+ *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
+ *ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
+ }
+
+ gpmc_ecc_used = -EINVAL;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
+
+/**
+ * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
+ * @cs: chip select number
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc: The ecc output buffer
+ */
+int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
+{
+ int i;
+ unsigned long nsectors, reg, val1, val2, val3, val4;
+
+ if (gpmc_ecc_used != cs)
+ return -EINVAL;
+
+ nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
+
+ /* Read hw-computed remainder */
+ val1 = gpmc_read_reg(reg + 0);
+ val2 = gpmc_read_reg(reg + 4);
+ val3 = gpmc_read_reg(reg + 8);
+ val4 = gpmc_read_reg(reg + 12);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs.
+ */
+ *ecc++ = 0xef ^ (val4 & 0xFF);
+ *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+ *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+ *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+ *ecc++ = 0xed ^ (val3 & 0xFF);
+ *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+ *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+ *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+ *ecc++ = 0x97 ^ (val2 & 0xFF);
+ *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+ *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+ *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+ *ecc++ = 0xb5 ^ (val1 & 0xFF);
+ }
+
+ gpmc_ecc_used = -EINVAL;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
+
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index a74f3cf54cc5..b4203277f3cd 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -251,8 +251,6 @@ static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd,
readsb(io_base, buf, len);
}
-const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
-
static struct mtd_partition ts78xx_ts_nand_parts[] = {
{
.name = "mbr",
@@ -277,7 +275,6 @@ static struct mtd_partition ts78xx_ts_nand_parts[] = {
static struct platform_nand_data ts78xx_ts_nand_data = {
.chip = {
.nr_chips = 1,
- .part_probe_types = ts_nand_part_probes,
.partitions = ts78xx_ts_nand_parts,
.nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
.chip_delay = 15,
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 56e8cebeb7d5..9244493dbcb7 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -679,8 +679,6 @@ static struct mtd_partition balloon3_partition_info[] = {
},
};
-static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
-
struct platform_nand_data balloon3_nand_pdata = {
.chip = {
.nr_chips = 4,
@@ -688,7 +686,6 @@ struct platform_nand_data balloon3_nand_pdata = {
.nr_partitions = ARRAY_SIZE(balloon3_partition_info),
.partitions = balloon3_partition_info,
.chip_delay = 50,
- .part_probe_types = balloon3_part_probes,
},
.ctrl = {
.hwcontrol = 0,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index a3a4a38d4972..97f82ad341bf 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -338,8 +338,6 @@ static struct mtd_partition em_x270_partition_info[] = {
},
};
-static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
-
struct platform_nand_data em_x270_nand_platdata = {
.chip = {
.nr_chips = 1,
@@ -347,7 +345,6 @@ struct platform_nand_data em_x270_nand_platdata = {
.nr_partitions = ARRAY_SIZE(em_x270_partition_info),
.partitions = em_x270_partition_info,
.chip_delay = 20,
- .part_probe_types = em_x270_part_probes,
},
.ctrl = {
.hwcontrol = 0,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 9507605ed547..0da35dccfd89 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -268,8 +268,6 @@ static struct mtd_partition palmtx_partition_info[] = {
},
};
-static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
-
struct platform_nand_data palmtx_nand_platdata = {
.chip = {
.nr_chips = 1,
@@ -277,7 +275,6 @@ struct platform_nand_data palmtx_nand_platdata = {
.nr_partitions = ARRAY_SIZE(palmtx_partition_info),
.partitions = palmtx_partition_info,
.chip_delay = 20,
- .part_probe_types = palmtx_part_probes,
},
.ctrl = {
.cmd_ctrl = palmtx_nand_cmd_ctl,
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 1527929b445a..f37764a36072 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -92,6 +92,8 @@ enum omap_ecc {
OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
/* 1-bit ecc: stored at beginning of spare area as romcode */
OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+ OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+ OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
};
/*
@@ -157,4 +159,13 @@ extern int gpmc_nand_write(int cs, int cmd, int wval);
int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
+
+#ifdef CONFIG_ARCH_OMAP3
+int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
+int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
+ int nerrors);
+int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
+int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
+#endif /* CONFIG_ARCH_OMAP3 */
+
#endif
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index f6ffd6f054c3..0b74218fdd3a 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -248,8 +248,6 @@ static struct platform_device bfin_uart0_device = {
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-const char *part_probes[] = { "cmdlinepart", NULL };
-
static struct mtd_partition bfin_plat_nand_partitions[] = {
{
.name = "params(nand)",
@@ -289,7 +287,6 @@ static struct platform_nand_data bfin_plat_nand_data = {
.chip = {
.nr_chips = 1,
.chip_delay = 30,
- .part_probe_types = part_probes,
.partitions = bfin_plat_nand_partitions,
.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
},
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 7dde01642d6b..bf2248474fa8 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -213,8 +213,6 @@ static int au1200_nand_device_ready(struct mtd_info *mtd)
return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
}
-static const char *db1200_part_probes[] = { "cmdlinepart", NULL };
-
static struct mtd_partition db1200_nand_parts[] = {
{
.name = "NAND FS 0",
@@ -235,7 +233,6 @@ struct platform_nand_data db1200_nand_platdata = {
.nr_partitions = ARRAY_SIZE(db1200_nand_parts),
.partitions = db1200_nand_parts,
.chip_delay = 20,
- .part_probe_types = db1200_part_probes,
},
.ctrl = {
.dev_ready = au1200_nand_device_ready,
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index 0893f2af0d01..c56e0246694e 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -145,8 +145,6 @@ static int au1300_nand_device_ready(struct mtd_info *mtd)
return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
}
-static const char *db1300_part_probes[] = { "cmdlinepart", NULL };
-
static struct mtd_partition db1300_nand_parts[] = {
{
.name = "NAND FS 0",
@@ -167,7 +165,6 @@ struct platform_nand_data db1300_nand_platdata = {
.nr_partitions = ARRAY_SIZE(db1300_nand_parts),
.partitions = db1300_nand_parts,
.chip_delay = 20,
- .part_probe_types = db1300_part_probes,
},
.ctrl = {
.dev_ready = au1300_nand_device_ready,
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index 6815d0783cd8..9eb79062f46e 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -149,8 +149,6 @@ static int au1550_nand_device_ready(struct mtd_info *mtd)
return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
}
-static const char *db1550_part_probes[] = { "cmdlinepart", NULL };
-
static struct mtd_partition db1550_nand_parts[] = {
{
.name = "NAND FS 0",
@@ -171,7 +169,6 @@ struct platform_nand_data db1550_nand_platdata = {
.nr_partitions = ARRAY_SIZE(db1550_nand_parts),
.partitions = db1550_nand_parts,
.chip_delay = 20,
- .part_probe_types = db1550_part_probes,
},
.ctrl = {
.dev_ready = au1550_nand_device_ready,
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index 87167dcc79fa..05a1d922cd60 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -244,11 +244,6 @@ static struct platform_device pnx833x_sata_device = {
.resource = pnx833x_sata_resources,
};
-static const char *part_probes[] = {
- "cmdlinepart",
- NULL
-};
-
static void
pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
@@ -268,7 +263,6 @@ static struct platform_nand_data pnx833x_flash_nand_data = {
.chip = {
.nr_chips = 1,
.chip_delay = 25,
- .part_probe_types = part_probes,
},
.ctrl = {
.cmd_ctrl = pnx833x_flash_nand_cmd_ctrl
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index ea774285e6c5..716e9a12f0e7 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -293,7 +293,6 @@ static void __init rb532_nand_setup(void)
rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
rb532_nand_data.chip.partitions = rb532_partition_info;
rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
- rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
}
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 34cd0c5ff2e1..a8a1ca741c85 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -188,7 +188,6 @@ static struct platform_nand_data migor_nand_flash_data = {
.partitions = migor_nand_flash_partitions,
.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
.chip_delay = 20,
- .part_probe_types = (const char *[]) { "cmdlinepart", NULL },
},
.ctrl = {
.dev_ready = migor_nand_flash_ready,
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 5760c1a4b3f6..27143e042af5 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -128,7 +128,7 @@ config MTD_AFS_PARTS
config MTD_OF_PARTS
tristate "OpenFirmware partitioning information support"
- default Y
+ default y
depends on OF
help
This provides a partition parsing function which derives
diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index 608321ee056e..63d2a64331f7 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -4,7 +4,7 @@
* Copyright © 2006-2008 Florian Fainelli <florian@openwrt.org>
* Mike Albon <malbon@openwrt.org>
* Copyright © 2009-2010 Daniel Dickinson <openwrt@cshore.neomailbox.net>
- * Copyright © 2011 Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright © 2011-2012 Jonas Gorski <jonas.gorski@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -82,6 +82,7 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
int namelen = 0;
int i;
u32 computed_crc;
+ bool rootfs_first = false;
if (bcm63xx_detect_cfe(master))
return -EINVAL;
@@ -109,6 +110,7 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
char *boardid = &(buf->board_id[0]);
char *tagversion = &(buf->tag_version[0]);
+ sscanf(buf->flash_image_start, "%u", &rootfsaddr);
sscanf(buf->kernel_address, "%u", &kerneladdr);
sscanf(buf->kernel_length, "%u", &kernellen);
sscanf(buf->total_length, "%u", &totallen);
@@ -117,10 +119,19 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
tagversion, boardid);
kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
- rootfsaddr = kerneladdr + kernellen;
+ rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
spareaddr = roundup(totallen, master->erasesize) + cfelen;
sparelen = master->size - spareaddr - nvramlen;
- rootfslen = spareaddr - rootfsaddr;
+
+ if (rootfsaddr < kerneladdr) {
+ /* default Broadcom layout */
+ rootfslen = kerneladdr - rootfsaddr;
+ rootfs_first = true;
+ } else {
+ /* OpenWrt layout */
+ rootfsaddr = kerneladdr + kernellen;
+ rootfslen = spareaddr - rootfsaddr;
+ }
} else {
pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
buf->header_crc, computed_crc);
@@ -156,18 +167,26 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
curpart++;
if (kernellen > 0) {
- parts[curpart].name = "kernel";
- parts[curpart].offset = kerneladdr;
- parts[curpart].size = kernellen;
+ int kernelpart = curpart;
+
+ if (rootfslen > 0 && rootfs_first)
+ kernelpart++;
+ parts[kernelpart].name = "kernel";
+ parts[kernelpart].offset = kerneladdr;
+ parts[kernelpart].size = kernellen;
curpart++;
}
if (rootfslen > 0) {
- parts[curpart].name = "rootfs";
- parts[curpart].offset = rootfsaddr;
- parts[curpart].size = rootfslen;
- if (sparelen > 0)
- parts[curpart].size += sparelen;
+ int rootfspart = curpart;
+
+ if (kernellen > 0 && rootfs_first)
+ rootfspart--;
+ parts[rootfspart].name = "rootfs";
+ parts[rootfspart].offset = rootfsaddr;
+ parts[rootfspart].size = rootfslen;
+ if (sparelen > 0 && !rootfs_first)
+ parts[rootfspart].size += sparelen;
curpart++;
}
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index d02592e6a0f0..22d0493a026f 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -317,7 +317,7 @@ static void fixup_s29gl064n_sectors(struct mtd_info *mtd)
if ((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0x003f) {
cfi->cfiq->EraseRegionInfo[0] |= 0x0040;
- pr_warning("%s: Bad S29GL064N CFI data, adjust from 64 to 128 sectors\n", mtd->name);
+ pr_warning("%s: Bad S29GL064N CFI data; adjust from 64 to 128 sectors\n", mtd->name);
}
}
@@ -328,10 +328,23 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd)
if ((cfi->cfiq->EraseRegionInfo[1] & 0xffff) == 0x007e) {
cfi->cfiq->EraseRegionInfo[1] &= ~0x0040;
- pr_warning("%s: Bad S29GL032N CFI data, adjust from 127 to 63 sectors\n", mtd->name);
+ pr_warning("%s: Bad S29GL032N CFI data; adjust from 127 to 63 sectors\n", mtd->name);
}
}
+static void fixup_s29ns512p_sectors(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+
+ /*
+ * S29NS512P flash uses more than 8bits to report number of sectors,
+ * which is not permitted by CFI.
+ */
+ cfi->cfiq->EraseRegionInfo[0] = 0x020001ff;
+ pr_warning("%s: Bad S29NS512P CFI data; adjust to 512 sectors\n", mtd->name);
+}
+
/* Used to fix CFI-Tables of chips without Extended Query Tables */
static struct cfi_fixup cfi_nopri_fixup_table[] = {
{ CFI_MFR_SST, 0x234a, fixup_sst39vf }, /* SST39VF1602 */
@@ -362,6 +375,7 @@ static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors },
{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors },
{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors },
+ { CFI_MFR_AMD, 0x3f00, fixup_s29ns512p_sectors },
{ CFI_MFR_SST, 0x536a, fixup_sst38vf640x_sectorsize }, /* SST38VF6402 */
{ CFI_MFR_SST, 0x536b, fixup_sst38vf640x_sectorsize }, /* SST38VF6401 */
{ CFI_MFR_SST, 0x536c, fixup_sst38vf640x_sectorsize }, /* SST38VF6404 */
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index ddf9ec6d9168..4558e0f4d07f 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -70,7 +70,7 @@ struct cmdline_mtd_partition {
/* mtdpart_setup() parses into here */
static struct cmdline_mtd_partition *partitions;
-/* the command line passed to mtdpart_setupd() */
+/* the command line passed to mtdpart_setup() */
static char *cmdline;
static int cmdline_parsed = 0;
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index a4a80b742e65..681e2ee0f2d6 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -52,8 +52,6 @@ static int _block2mtd_erase(struct block2mtd_dev *dev, loff_t to, size_t len)
while (pages) {
page = page_read(mapping, index);
- if (!page)
- return -ENOMEM;
if (IS_ERR(page))
return PTR_ERR(page);
@@ -112,8 +110,6 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
len = len - cpylen;
page = page_read(dev->blkdev->bd_inode->i_mapping, index);
- if (!page)
- return -ENOMEM;
if (IS_ERR(page))
return PTR_ERR(page);
@@ -148,8 +144,6 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf,
len = len - cpylen;
page = page_read(mapping, index);
- if (!page)
- return -ENOMEM;
if (IS_ERR(page))
return PTR_ERR(page);
@@ -271,7 +265,6 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
dev->mtd.flags = MTD_CAP_RAM;
dev->mtd._erase = block2mtd_erase;
dev->mtd._write = block2mtd_write;
- dev->mtd._writev = mtd_writev;
dev->mtd._sync = block2mtd_sync;
dev->mtd._read = block2mtd_read;
dev->mtd.priv = dev;
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 50aa90aa7a7f..f70854d728fe 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -227,7 +227,7 @@ static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
u8 data8, *dst8;
doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len);
- cdr = len & 0x3;
+ cdr = len & 0x1;
len4 = len - cdr;
if (first)
@@ -732,12 +732,24 @@ err:
* @len: the number of bytes to be read (must be a multiple of 4)
* @buf: the buffer to be filled in (or NULL is forget bytes)
* @first: 1 if first time read, DOC_READADDRESS should be set
+ * @last_odd: 1 if last read ended up on an odd byte
+ *
+ * Reads bytes from a prepared page. There is a trickery here : if the last read
+ * ended up on an odd offset in the 1024 bytes double page, ie. between the 2
+ * planes, the first byte must be read apart. If a word (16bit) read was used,
+ * the read would return the byte of plane 2 as low *and* high endian, which
+ * will mess the read.
*
*/
static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf,
- int first)
+ int first, int last_odd)
{
- doc_read_data_area(docg3, buf, len, first);
+ if (last_odd && len > 0) {
+ doc_read_data_area(docg3, buf, 1, first);
+ doc_read_data_area(docg3, buf ? buf + 1 : buf, len - 1, 0);
+ } else {
+ doc_read_data_area(docg3, buf, len, first);
+ }
doc_delay(docg3, 2);
return len;
}
@@ -850,6 +862,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
u8 *buf = ops->datbuf;
size_t len, ooblen, nbdata, nboob;
u8 hwecc[DOC_ECC_BCH_SIZE], eccconf1;
+ int max_bitflips = 0;
if (buf)
len = ops->len;
@@ -876,7 +889,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
ret = 0;
skip = from % DOC_LAYOUT_PAGE_SIZE;
mutex_lock(&docg3->cascade->lock);
- while (!ret && (len > 0 || ooblen > 0)) {
+ while (ret >= 0 && (len > 0 || ooblen > 0)) {
calc_block_sector(from - skip, &block0, &block1, &page, &ofs,
docg3->reliable);
nbdata = min_t(size_t, len, DOC_LAYOUT_PAGE_SIZE - skip);
@@ -887,20 +900,20 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES);
if (ret < 0)
goto err_in_read;
- ret = doc_read_page_getbytes(docg3, skip, NULL, 1);
+ ret = doc_read_page_getbytes(docg3, skip, NULL, 1, 0);
if (ret < skip)
goto err_in_read;
- ret = doc_read_page_getbytes(docg3, nbdata, buf, 0);
+ ret = doc_read_page_getbytes(docg3, nbdata, buf, 0, skip % 2);
if (ret < nbdata)
goto err_in_read;
doc_read_page_getbytes(docg3,
DOC_LAYOUT_PAGE_SIZE - nbdata - skip,
- NULL, 0);
- ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0);
+ NULL, 0, (skip + nbdata) % 2);
+ ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0, 0);
if (ret < nboob)
goto err_in_read;
doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE - nboob,
- NULL, 0);
+ NULL, 0, nboob % 2);
doc_get_bch_hw_ecc(docg3, hwecc);
eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1);
@@ -936,7 +949,8 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
}
if (ret > 0) {
mtd->ecc_stats.corrected += ret;
- ret = -EUCLEAN;
+ max_bitflips = max(max_bitflips, ret);
+ ret = max_bitflips;
}
}
@@ -1004,7 +1018,7 @@ static int doc_reload_bbt(struct docg3 *docg3)
DOC_LAYOUT_PAGE_SIZE);
if (!ret)
doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE,
- buf, 1);
+ buf, 1, 0);
buf += DOC_LAYOUT_PAGE_SIZE;
}
doc_read_page_finish(docg3);
@@ -1064,10 +1078,10 @@ static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
ret = doc_reset_seq(docg3);
if (!ret)
ret = doc_read_page_prepare(docg3, block0, block1, page,
- ofs + DOC_LAYOUT_WEAR_OFFSET);
+ ofs + DOC_LAYOUT_WEAR_OFFSET, 0);
if (!ret)
ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE,
- buf, 1);
+ buf, 1, 0);
doc_read_page_finish(docg3);
if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK))
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 1924d247c1cb..5d0d68c3fe27 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -639,12 +639,16 @@ static const struct spi_device_id m25p_ids[] = {
{ "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+ /* Everspin */
+ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) },
+
/* Intel/Numonyx -- xxxs33b */
{ "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
{ "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) },
{ "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
/* Macronix */
+ { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
{ "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
{ "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
{ "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
@@ -728,6 +732,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
/* Catalyst / On Semiconductor -- non-JEDEC */
{ "cat25c11", CAT25_INFO( 16, 8, 16, 1) },
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 797d43cd3550..67960362681e 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -990,9 +990,9 @@ static int __devinit spear_smi_probe(struct platform_device *pdev)
goto err_clk;
}
- ret = clk_enable(dev->clk);
+ ret = clk_prepare_enable(dev->clk);
if (ret)
- goto err_clk_enable;
+ goto err_clk_prepare_enable;
ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev);
if (ret) {
@@ -1020,8 +1020,8 @@ err_bank_setup:
free_irq(irq, dev);
platform_set_drvdata(pdev, NULL);
err_irq:
- clk_disable(dev->clk);
-err_clk_enable:
+ clk_disable_unprepare(dev->clk);
+err_clk_prepare_enable:
clk_put(dev->clk);
err_clk:
iounmap(dev->io_base);
@@ -1074,7 +1074,7 @@ static int __devexit spear_smi_remove(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
free_irq(irq, dev);
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
clk_put(dev->clk);
iounmap(dev->io_base);
kfree(dev);
@@ -1091,7 +1091,7 @@ int spear_smi_suspend(struct platform_device *pdev, pm_message_t state)
struct spear_smi *dev = platform_get_drvdata(pdev);
if (dev && dev->clk)
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
return 0;
}
@@ -1102,7 +1102,7 @@ int spear_smi_resume(struct platform_device *pdev)
int ret = -EPERM;
if (dev && dev->clk)
- ret = clk_enable(dev->clk);
+ ret = clk_prepare_enable(dev->clk);
if (!ret)
spear_smi_hw_init(dev);
diff --git a/drivers/mtd/lpddr/qinfo_probe.c b/drivers/mtd/lpddr/qinfo_probe.c
index dbfe17baf046..45abed67f1ef 100644
--- a/drivers/mtd/lpddr/qinfo_probe.c
+++ b/drivers/mtd/lpddr/qinfo_probe.c
@@ -57,7 +57,7 @@ static struct qinfo_query_info qinfo_array[] = {
static long lpddr_get_qinforec_pos(struct map_info *map, char *id_str)
{
- int qinfo_lines = sizeof(qinfo_array)/sizeof(struct qinfo_query_info);
+ int qinfo_lines = ARRAY_SIZE(qinfo_array);
int i;
int bankwidth = map_bankwidth(map) * 8;
int major, minor;
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 8af67cfd671a..5ba2458e799a 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -224,7 +224,7 @@ config MTD_CK804XROM
config MTD_SCB2_FLASH
tristate "BIOS flash chip on Intel SCB2 boards"
- depends on X86 && MTD_JEDECPROBE
+ depends on X86 && MTD_JEDECPROBE && PCI
help
Support for treating the BIOS flash chip on Intel SCB2 boards
as an MTD device - with this you can reprogram your BIOS.
diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c
index 92e1f41634c7..93f03175c82d 100644
--- a/drivers/mtd/maps/intel_vr_nor.c
+++ b/drivers/mtd/maps/intel_vr_nor.c
@@ -260,18 +260,7 @@ static struct pci_driver vr_nor_pci_driver = {
.id_table = vr_nor_pci_ids,
};
-static int __init vr_nor_mtd_init(void)
-{
- return pci_register_driver(&vr_nor_pci_driver);
-}
-
-static void __exit vr_nor_mtd_exit(void)
-{
- pci_unregister_driver(&vr_nor_pci_driver);
-}
-
-module_init(vr_nor_mtd_init);
-module_exit(vr_nor_mtd_exit);
+module_pci_driver(vr_nor_pci_driver);
MODULE_AUTHOR("Andy Lowe");
MODULE_DESCRIPTION("MTD map driver for NOR flash on Intel Vermilion Range");
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 1d005a3e9b41..f14ce0af763f 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -352,18 +352,7 @@ static struct pci_driver mtd_pci_driver = {
.id_table = mtd_pci_ids,
};
-static int __init mtd_pci_maps_init(void)
-{
- return pci_register_driver(&mtd_pci_driver);
-}
-
-static void __exit mtd_pci_maps_exit(void)
-{
- pci_unregister_driver(&mtd_pci_driver);
-}
-
-module_init(mtd_pci_maps_init);
-module_exit(mtd_pci_maps_exit);
+module_pci_driver(mtd_pci_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 934a72c80078..9dcbc684abdb 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -234,20 +234,7 @@ static struct pci_driver scb2_flash_driver = {
.remove = __devexit_p(scb2_flash_remove),
};
-static int __init
-scb2_flash_init(void)
-{
- return pci_register_driver(&scb2_flash_driver);
-}
-
-static void __exit
-scb2_flash_exit(void)
-{
- pci_unregister_driver(&scb2_flash_driver);
-}
-
-module_init(scb2_flash_init);
-module_exit(scb2_flash_exit);
+module_pci_driver(scb2_flash_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tim Hockin <thockin@sun.com>");
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
index 71b0ba797912..e7534c82f93a 100644
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -59,7 +59,7 @@ static struct mtd_partition bigflash_parts[] = {
}
};
-static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL};
+static const char *part_probes[] __initconst = {"cmdlinepart", "RedBoot", NULL};
#define init_sbc82xx_one_flash(map, br, or) \
do { \
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index c837507dfb1c..575730744fdb 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -250,6 +250,43 @@ static ssize_t mtd_name_show(struct device *dev,
}
static DEVICE_ATTR(name, S_IRUGO, mtd_name_show, NULL);
+static ssize_t mtd_ecc_strength_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", mtd->ecc_strength);
+}
+static DEVICE_ATTR(ecc_strength, S_IRUGO, mtd_ecc_strength_show, NULL);
+
+static ssize_t mtd_bitflip_threshold_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", mtd->bitflip_threshold);
+}
+
+static ssize_t mtd_bitflip_threshold_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+ unsigned int bitflip_threshold;
+ int retval;
+
+ retval = kstrtouint(buf, 0, &bitflip_threshold);
+ if (retval)
+ return retval;
+
+ mtd->bitflip_threshold = bitflip_threshold;
+ return count;
+}
+static DEVICE_ATTR(bitflip_threshold, S_IRUGO | S_IWUSR,
+ mtd_bitflip_threshold_show,
+ mtd_bitflip_threshold_store);
+
static struct attribute *mtd_attrs[] = {
&dev_attr_type.attr,
&dev_attr_flags.attr,
@@ -260,6 +297,8 @@ static struct attribute *mtd_attrs[] = {
&dev_attr_oobsize.attr,
&dev_attr_numeraseregions.attr,
&dev_attr_name.attr,
+ &dev_attr_ecc_strength.attr,
+ &dev_attr_bitflip_threshold.attr,
NULL,
};
@@ -322,6 +361,10 @@ int add_mtd_device(struct mtd_info *mtd)
mtd->index = i;
mtd->usecount = 0;
+ /* default value if not set by driver */
+ if (mtd->bitflip_threshold == 0)
+ mtd->bitflip_threshold = mtd->ecc_strength;
+
if (is_power_of_2(mtd->erasesize))
mtd->erasesize_shift = ffs(mtd->erasesize) - 1;
else
@@ -757,12 +800,24 @@ EXPORT_SYMBOL_GPL(mtd_get_unmapped_area);
int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
u_char *buf)
{
+ int ret_code;
*retlen = 0;
if (from < 0 || from > mtd->size || len > mtd->size - from)
return -EINVAL;
if (!len)
return 0;
- return mtd->_read(mtd, from, len, retlen, buf);
+
+ /*
+ * In the absence of an error, drivers return a non-negative integer
+ * representing the maximum number of bitflips that were corrected on
+ * any one ecc region (if applicable; zero otherwise).
+ */
+ ret_code = mtd->_read(mtd, from, len, retlen, buf);
+ if (unlikely(ret_code < 0))
+ return ret_code;
+ if (mtd->ecc_strength == 0)
+ return 0; /* device lacks ecc */
+ return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0;
}
EXPORT_SYMBOL_GPL(mtd_read);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 9651c06de0a9..d518e4db8a0b 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -67,12 +67,12 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
stats = part->master->ecc_stats;
res = part->master->_read(part->master, from + part->offset, len,
retlen, buf);
- if (unlikely(res)) {
- if (mtd_is_bitflip(res))
- mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected;
- if (mtd_is_eccerr(res))
- mtd->ecc_stats.failed += part->master->ecc_stats.failed - stats.failed;
- }
+ if (unlikely(mtd_is_eccerr(res)))
+ mtd->ecc_stats.failed +=
+ part->master->ecc_stats.failed - stats.failed;
+ else
+ mtd->ecc_stats.corrected +=
+ part->master->ecc_stats.corrected - stats.corrected;
return res;
}
@@ -517,6 +517,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
slave->mtd.ecclayout = master->ecclayout;
slave->mtd.ecc_strength = master->ecc_strength;
+ slave->mtd.bitflip_threshold = master->bitflip_threshold;
+
if (master->_block_isbad) {
uint64_t offs = 0;
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7d17cecad69d..31bb7e5b504a 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -115,6 +115,46 @@ config MTD_NAND_OMAP2
Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
platforms.
+config MTD_NAND_OMAP_BCH
+ depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
+ bool "Enable support for hardware BCH error correction"
+ default n
+ select BCH
+ select BCH_CONST_PARAMS
+ help
+ Support for hardware BCH error correction.
+
+choice
+ prompt "BCH error correction capability"
+ depends on MTD_NAND_OMAP_BCH
+
+config MTD_NAND_OMAP_BCH8
+ bool "8 bits / 512 bytes (recommended)"
+ help
+ Support correcting up to 8 bitflips per 512-byte block.
+ This will use 13 bytes of spare area per 512 bytes of page data.
+ This is the recommended mode, as 4-bit mode does not work
+ on some OMAP3 revisions, due to a hardware bug.
+
+config MTD_NAND_OMAP_BCH4
+ bool "4 bits / 512 bytes"
+ help
+ Support correcting up to 4 bitflips per 512-byte block.
+ This will use 7 bytes of spare area per 512 bytes of page data.
+ Note that this mode does not work on some OMAP3 revisions, due to a
+ hardware bug. Please check your OMAP datasheet before selecting this
+ mode.
+
+endchoice
+
+if MTD_NAND_OMAP_BCH
+config BCH_CONST_M
+ default 13
+config BCH_CONST_T
+ default 4 if MTD_NAND_OMAP_BCH4
+ default 8 if MTD_NAND_OMAP_BCH8
+endif
+
config MTD_NAND_IDS
tristate
@@ -440,7 +480,7 @@ config MTD_NAND_NANDSIM
config MTD_NAND_GPMI_NAND
bool "GPMI NAND Flash Controller driver"
- depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
help
Enables NAND Flash support for IMX23 or IMX28.
The GPMI controller is very powerful, with the help of BCH
diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c
index 4f20e1d8bef1..60a0dfdb0808 100644
--- a/drivers/mtd/nand/alauda.c
+++ b/drivers/mtd/nand/alauda.c
@@ -414,7 +414,7 @@ static int alauda_bounce_read(struct mtd_info *mtd, loff_t from, size_t len,
}
err = 0;
if (corrected)
- err = -EUCLEAN;
+ err = 1; /* return max_bitflips per ecc step */
if (uncorrected)
err = -EBADMSG;
out:
@@ -446,7 +446,7 @@ static int alauda_read(struct mtd_info *mtd, loff_t from, size_t len,
}
err = 0;
if (corrected)
- err = -EUCLEAN;
+ err = 1; /* return max_bitflips per ecc step */
if (uncorrected)
err = -EBADMSG;
return err;
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 2165576a1c67..97ac6712bb19 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -324,9 +324,10 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
* mtd: mtd info structure
* chip: nand chip info structure
* buf: buffer to store read data
+ * oob_required: caller expects OOB data read to chip->oob_poi
*/
-static int atmel_nand_read_page(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page)
+static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -335,6 +336,7 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
uint8_t *oob = chip->oob_poi;
uint8_t *ecc_pos;
int stat;
+ unsigned int max_bitflips = 0;
/*
* Errata: ALE is incorrectly wired up to the ECC controller
@@ -371,10 +373,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
/* check if there's an error */
stat = chip->ecc.correct(mtd, p, oob, NULL);
- if (stat < 0)
+ if (stat < 0) {
mtd->ecc_stats.failed++;
- else
+ } else {
mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
/* get back to oob start (end of page) */
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
@@ -382,7 +386,7 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
/* read the oob */
chip->read_buf(mtd, oob, mtd->oobsize);
- return 0;
+ return max_bitflips;
}
/*
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 73abbc3e093e..9f609d2dcf62 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -508,8 +508,6 @@ static int __devinit au1550nd_probe(struct platform_device *pdev)
this->chip_delay = 30;
this->ecc.mode = NAND_ECC_SOFT;
- this->options = NAND_NO_AUTOINCR;
-
if (pd->devwidth)
this->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/bcm_umi_bch.c b/drivers/mtd/nand/bcm_umi_bch.c
index a930666d0687..5914bb32e001 100644
--- a/drivers/mtd/nand/bcm_umi_bch.c
+++ b/drivers/mtd/nand/bcm_umi_bch.c
@@ -22,9 +22,9 @@
/* ---- Private Function Prototypes -------------------------------------- */
static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page);
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page);
static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf);
+ struct nand_chip *chip, const uint8_t *buf, int oob_required);
/* ---- Private Variables ------------------------------------------------ */
@@ -103,11 +103,12 @@ static struct nand_ecclayout nand_hw_eccoob_4096 = {
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+* @oob_required: caller expects OOB data read to chip->oob_poi
*
***************************************************************************/
static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t * buf,
- int page)
+ int oob_required, int page)
{
int sectorIdx = 0;
int eccsize = chip->ecc.size;
@@ -116,6 +117,7 @@ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
uint8_t eccCalc[NAND_ECC_NUM_BYTES];
int sectorOobSize = mtd->oobsize / eccsteps;
int stat;
+ unsigned int max_bitflips = 0;
for (sectorIdx = 0; sectorIdx < eccsteps;
sectorIdx++, datap += eccsize) {
@@ -177,9 +179,10 @@ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
}
#endif
mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
}
}
- return 0;
+ return max_bitflips;
}
/****************************************************************************
@@ -188,10 +191,11 @@ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
+* @oob_required: must write chip->oob_poi to OOB
*
***************************************************************************/
static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+ struct nand_chip *chip, const uint8_t *buf, int oob_required)
{
int sectorIdx = 0;
int eccsize = chip->ecc.size;
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 6908cdde3065..c855e7cd337b 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -341,7 +341,7 @@ static int bcm_umi_nand_verify_buf(struct mtd_info *mtd, const u_char * buf,
* for MLC parts which may have permanently stuck bits.
*/
struct nand_chip *chip = mtd->priv;
- int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0);
+ int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0, 0);
if (ret < 0)
return -EFAULT;
else {
@@ -476,12 +476,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
this->badblock_pattern = &largepage_bbt;
}
- /*
- * FIXME: ecc strength value of 6 bits per 512 bytes of data is a
- * conservative guess, given 13 ecc bytes and using bch alg.
- * (Assume Galois field order m=15 to allow a margin of error.)
- */
- this->ecc.strength = 6;
+ this->ecc.strength = 8;
#endif
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index d7b86b925de5..3f1c18599cbd 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -558,7 +558,7 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
}
static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
bf5xx_nand_read_buf(mtd, buf, mtd->writesize);
bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -567,7 +567,7 @@ static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip
}
static void bf5xx_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
bf5xx_nand_write_buf(mtd, buf, mtd->writesize);
bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 2a96e1a12062..41371ba1a811 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -364,25 +364,27 @@ static int cafe_nand_write_oob(struct mtd_info *mtd,
/* Don't use -- use nand_read_oob_std for now */
static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- return 1;
+ return 0;
}
/**
* cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller expects OOB data read to chip->oob_poi
*
* The hw generator calculates the error syndrome automatically. Therefor
* we need a special oob layout and handling.
*/
static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
struct cafe_priv *cafe = mtd->priv;
+ unsigned int max_bitflips = 0;
cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n",
cafe_readl(cafe, NAND_ECC_RESULT),
@@ -449,10 +451,11 @@ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
} else {
dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", n);
mtd->ecc_stats.corrected += n;
+ max_bitflips = max_t(unsigned int, max_bitflips, n);
}
}
- return 0;
+ return max_bitflips;
}
static struct nand_ecclayout cafe_oobinfo_2048 = {
@@ -518,7 +521,8 @@ static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = {
static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
struct cafe_priv *cafe = mtd->priv;
@@ -530,16 +534,17 @@ static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
}
static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached, int raw)
+ const uint8_t *buf, int oob_required, int page,
+ int cached, int raw)
{
int status;
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
if (unlikely(raw))
- chip->ecc.write_page_raw(mtd, chip, buf);
+ chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
else
- chip->ecc.write_page(mtd, chip, buf);
+ chip->ecc.write_page(mtd, chip, buf, oob_required);
/*
* Cached progamming disabled for now, Not sure if its worth the
@@ -685,7 +690,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
/* Enable the following for a flash based bad block table */
cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
- cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+ cafe->nand.options = NAND_OWN_BUFFERS;
if (skipbbt) {
cafe->nand.options |= NAND_SKIP_BBTSCAN;
@@ -888,17 +893,7 @@ static struct pci_driver cafe_nand_pci_driver = {
.resume = cafe_nand_resume,
};
-static int __init cafe_nand_init(void)
-{
- return pci_register_driver(&cafe_nand_pci_driver);
-}
-
-static void __exit cafe_nand_exit(void)
-{
- pci_unregister_driver(&cafe_nand_pci_driver);
-}
-module_init(cafe_nand_init);
-module_exit(cafe_nand_exit);
+module_pci_driver(cafe_nand_pci_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 821c34c62500..adb6c3ef37fb 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -240,7 +240,6 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
/* Enable the following for a flash based bad block table */
this->bbt_options = NAND_BBT_USE_FLASH;
- this->options = NAND_NO_AUTOINCR;
/* Scan to find existence of the device */
if (nand_scan(new_mtd, 1)) {
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index a9e57d686297..0650aafa0dd2 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -924,9 +924,10 @@ bool is_erased(uint8_t *buf, int len)
#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
- uint32_t irq_status)
+ uint32_t irq_status, unsigned int *max_bitflips)
{
bool check_erased_page = false;
+ unsigned int bitflips = 0;
if (irq_status & INTR_STATUS__ECC_ERR) {
/* read the ECC errors. we'll ignore them for now */
@@ -965,6 +966,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
/* correct the ECC error */
buf[offset] ^= err_correction_value;
denali->mtd.ecc_stats.corrected++;
+ bitflips++;
}
} else {
/* if the error is not correctable, need to
@@ -984,6 +986,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
clear_interrupts(denali);
denali_set_intr_modes(denali, true);
}
+ *max_bitflips = bitflips;
return check_erased_page;
}
@@ -1084,7 +1087,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
* by write_page above.
* */
static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
/* for regular page writes, we let HW handle all the ECC
* data written to the device. */
@@ -1096,7 +1099,7 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
* write_page() function above.
*/
static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
/* for raw page writes, we want to disable ECC and simply write
whatever data is in the buffer. */
@@ -1110,17 +1113,17 @@ static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
}
static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
read_oob_data(mtd, chip->oob_poi, page);
- return 0; /* notify NAND core to send command to
- NAND device. */
+ return 0;
}
static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
+ unsigned int max_bitflips;
struct denali_nand_info *denali = mtd_to_denali(mtd);
dma_addr_t addr = denali->buf.dma_buf;
@@ -1153,7 +1156,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
memcpy(buf, denali->buf.buf, mtd->writesize);
- check_erased_page = handle_ecc(denali, buf, irq_status);
+ check_erased_page = handle_ecc(denali, buf, irq_status, &max_bitflips);
denali_enable_dma(denali, false);
if (check_erased_page) {
@@ -1167,11 +1170,11 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
denali->mtd.ecc_stats.failed++;
}
}
- return 0;
+ return max_bitflips;
}
static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
@@ -1702,17 +1705,4 @@ static struct pci_driver denali_pci_driver = {
.remove = denali_pci_remove,
};
-static int __devinit denali_init(void)
-{
- printk(KERN_INFO "Spectra MTD driver\n");
- return pci_register_driver(&denali_pci_driver);
-}
-
-/* Free memory */
-static void __devexit denali_exit(void)
-{
- pci_unregister_driver(&denali_pci_driver);
-}
-
-module_init(denali_init);
-module_exit(denali_exit);
+module_pci_driver(denali_pci_driver);
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index b08202664543..a225e49a5623 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -720,6 +720,7 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
struct docg4_priv *doc = nand->priv;
void __iomem *docptr = doc->virtadr;
uint16_t status, edc_err, *buf16;
+ int bits_corrected = 0;
dev_dbg(doc->dev, "%s: page %08x\n", __func__, page);
@@ -772,7 +773,7 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
/* If bitflips are reported, attempt to correct with ecc */
if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) {
- int bits_corrected = correct_data(mtd, buf, page);
+ bits_corrected = correct_data(mtd, buf, page);
if (bits_corrected == -EBADMSG)
mtd->ecc_stats.failed++;
else
@@ -781,24 +782,24 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
}
writew(0, docptr + DOC_DATAEND);
- return 0;
+ return bits_corrected;
}
static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
return read_page(mtd, nand, buf, page, false);
}
static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
return read_page(mtd, nand, buf, page, true);
}
static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
- int page, int sndcmd)
+ int page)
{
struct docg4_priv *doc = nand->priv;
void __iomem *docptr = doc->virtadr;
@@ -952,13 +953,13 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *nand,
}
static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
return write_page(mtd, nand, buf, false);
}
static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
return write_page(mtd, nand, buf, true);
}
@@ -1002,7 +1003,7 @@ static int __init read_factory_bbt(struct mtd_info *mtd)
return -ENOMEM;
read_page_prologue(mtd, g4_addr);
- status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE);
+ status = docg4_read_page(mtd, nand, buf, 0, DOCG4_FACTORY_BBT_PAGE);
if (status)
goto exit;
@@ -1079,7 +1080,7 @@ static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
/* write first page of block */
write_page_prologue(mtd, g4_addr);
- docg4_write_page(mtd, nand, buf);
+ docg4_write_page(mtd, nand, buf, 1);
ret = pageprog(mtd);
if (!ret)
mtd->ecc_stats.badblocks++;
@@ -1192,8 +1193,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
nand->ecc.prepad = 8;
nand->ecc.bytes = 8;
nand->ecc.strength = DOCG4_T;
- nand->options =
- NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR;
+ nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE;
nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
nand->controller = &nand->hwcontrol;
spin_lock_init(&nand->controller->lock);
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 80b5264f0a32..784293806110 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -75,6 +75,7 @@ struct fsl_elbc_fcm_ctrl {
unsigned int use_mdr; /* Non zero if the MDR is to be set */
unsigned int oob; /* Non zero if operating on OOB data */
unsigned int counter; /* counter for the initializations */
+ unsigned int max_bitflips; /* Saved during READ0 cmd */
};
/* These map to the positions used by the FCM hardware ECC generator */
@@ -253,6 +254,8 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
if (chip->ecc.mode != NAND_ECC_HW)
return 0;
+ elbc_fcm_ctrl->max_bitflips = 0;
+
if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
uint32_t lteccr = in_be32(&lbc->lteccr);
/*
@@ -262,11 +265,16 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
* bits 28-31 are uncorrectable errors, marked elsewhere.
* for small page nand only 1 bit is used.
* if the ELBC doesn't have the lteccr register it reads 0
+ * FIXME: 4 bits can be corrected on NANDs with 2k pages, so
+ * count the number of sub-pages with bitflips and update
+ * ecc_stats.corrected accordingly.
*/
if (lteccr & 0x000F000F)
out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
- if (lteccr & 0x000F0000)
+ if (lteccr & 0x000F0000) {
mtd->ecc_stats.corrected++;
+ elbc_fcm_ctrl->max_bitflips = 1;
+ }
}
return 0;
@@ -738,26 +746,28 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
return 0;
}
-static int fsl_elbc_read_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf,
- int page)
+static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
+
fsl_elbc_read_buf(mtd, buf, mtd->writesize);
- fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ if (oob_required)
+ fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
if (fsl_elbc_wait(mtd, chip) & NAND_STATUS_FAIL)
mtd->ecc_stats.failed++;
- return 0;
+ return elbc_fcm_ctrl->max_bitflips;
}
/* ECC will be calculated automatically, and errors will be detected in
* waitfunc.
*/
-static void fsl_elbc_write_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf)
+static void fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -795,7 +805,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ chip->options = NAND_NO_READRDY;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->controller = &elbc_fcm_ctrl->controller;
@@ -814,11 +824,6 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
- /*
- * FIXME: can hardware ecc correct 4 bitflips if page size is
- * 2k? Then does hardware report number of corrections for this
- * case? If so, ecc_stats reporting needs to be fixed as well.
- */
} else {
/* otherwise fall back to default software ECC */
chip->ecc.mode = NAND_ECC_SOFT;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index c30ac7b83d28..9602c1b7e27e 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -63,6 +63,7 @@ struct fsl_ifc_nand_ctrl {
unsigned int oob; /* Non zero if operating on OOB data */
unsigned int eccread; /* Non zero for a full-page ECC read */
unsigned int counter; /* counter for the initializations */
+ unsigned int max_bitflips; /* Saved during READ0 cmd */
};
static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl;
@@ -262,6 +263,8 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_WPER)
dev_err(priv->dev, "NAND Flash Write Protect Error\n");
+ nctrl->max_bitflips = 0;
+
if (nctrl->eccread) {
int errors;
int bufnum = nctrl->page & priv->bufnum_mask;
@@ -290,6 +293,9 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
}
mtd->ecc_stats.corrected += errors;
+ nctrl->max_bitflips = max_t(unsigned int,
+ nctrl->max_bitflips,
+ errors);
}
nctrl->eccread = 0;
@@ -375,21 +381,31 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
return;
- /* READID must read all 8 possible bytes */
case NAND_CMD_READID:
+ case NAND_CMD_PARAM: {
+ int timing = IFC_FIR_OP_RB;
+ if (command == NAND_CMD_PARAM)
+ timing = IFC_FIR_OP_RBCD;
+
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
+ (timing << IFC_NAND_FIR0_OP2_SHIFT));
out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
- /* 8 bytes for manuf, device and exts */
- out_be32(&ifc->ifc_nand.nand_fbcr, 8);
- ifc_nand_ctrl->read_bytes = 8;
+ command << IFC_NAND_FCR0_CMD0_SHIFT);
+ out_be32(&ifc->ifc_nand.row3, column);
+
+ /*
+ * although currently it's 8 bytes for READID, we always read
+ * the maximum 256 bytes(for PARAM)
+ */
+ out_be32(&ifc->ifc_nand.nand_fbcr, 256);
+ ifc_nand_ctrl->read_bytes = 256;
set_addr(mtd, 0, 0, 0);
fsl_ifc_run_command(mtd);
return;
+ }
/* ERASE1 stores the block and page address */
case NAND_CMD_ERASE1:
@@ -682,15 +698,16 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
return nand_fsr | NAND_STATUS_WP;
}
-static int fsl_ifc_read_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page)
+static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
fsl_ifc_read_buf(mtd, buf, mtd->writesize);
- fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ if (oob_required)
+ fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER)
dev_err(priv->dev, "NAND Flash ECC Uncorrectable Error\n");
@@ -698,15 +715,14 @@ static int fsl_ifc_read_page(struct mtd_info *mtd,
if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
mtd->ecc_stats.failed++;
- return 0;
+ return nctrl->max_bitflips;
}
/* ECC will be calculated automatically, and errors will be detected in
* waitfunc.
*/
-static void fsl_ifc_write_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf)
+static void fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
fsl_ifc_write_buf(mtd, buf, mtd->writesize);
fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -789,7 +805,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
out_be32(&ifc->ifc_nand.ncfgr, 0x0);
/* set up nand options */
- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ chip->options = NAND_NO_READRDY;
chip->bbt_options = NAND_BBT_USE_FLASH;
@@ -811,6 +827,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
/* Hardware generates ECC per 512 Bytes */
chip->ecc.size = 512;
chip->ecc.bytes = 8;
+ chip->ecc.strength = 4;
switch (csor & CSOR_NAND_PGS_MASK) {
case CSOR_NAND_PGS_512:
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 1b8330e1155a..38d26240d8b1 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -692,6 +692,7 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller expects OOB data read to chip->oob_poi
* @page: page number to read
*
* This routine is needed for fsmc version 8 as reading from NAND chip has to be
@@ -701,7 +702,7 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
* max of 8 bits)
*/
static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
@@ -720,6 +721,7 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
*/
uint16_t ecc_oob[7];
uint8_t *oob = (uint8_t *)&ecc_oob[0];
+ unsigned int max_bitflips = 0;
for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
@@ -748,13 +750,15 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
- if (stat < 0)
+ if (stat < 0) {
mtd->ecc_stats.failed++;
- else
+ } else {
mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
}
- return 0;
+ return max_bitflips;
}
/*
@@ -994,9 +998,9 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
return PTR_ERR(host->clk);
}
- ret = clk_enable(host->clk);
+ ret = clk_prepare_enable(host->clk);
if (ret)
- goto err_clk_enable;
+ goto err_clk_prepare_enable;
/*
* This device ID is actually a common AMBA ID as used on the
@@ -1176,8 +1180,8 @@ err_req_write_chnl:
if (host->mode == USE_DMA_ACCESS)
dma_release_channel(host->read_dma_chan);
err_req_read_chnl:
- clk_disable(host->clk);
-err_clk_enable:
+ clk_disable_unprepare(host->clk);
+err_clk_prepare_enable:
clk_put(host->clk);
return ret;
}
@@ -1198,7 +1202,7 @@ static int fsmc_nand_remove(struct platform_device *pdev)
dma_release_channel(host->write_dma_chan);
dma_release_channel(host->read_dma_chan);
}
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
clk_put(host->clk);
}
@@ -1210,7 +1214,7 @@ static int fsmc_nand_suspend(struct device *dev)
{
struct fsmc_nand_data *host = dev_get_drvdata(dev);
if (host)
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
return 0;
}
@@ -1218,7 +1222,7 @@ static int fsmc_nand_resume(struct device *dev)
{
struct fsmc_nand_data *host = dev_get_drvdata(dev);
if (host) {
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
fsmc_nand_setup(host->regs_va, host->bank,
host->nand.options & NAND_BUSWIDTH_16,
host->dev_timings);
diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
index 4effb8c579db..a0924515c396 100644
--- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -51,15 +51,26 @@
#define BP_BCH_FLASH0LAYOUT0_ECC0 12
#define BM_BCH_FLASH0LAYOUT0_ECC0 (0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
-#define BF_BCH_FLASH0LAYOUT0_ECC0(v) \
- (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0)
+#define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0 11
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0 (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v, x) \
+ (GPMI_IS_MX6Q(x) \
+ ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) \
+ & MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0) \
+ : (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) \
+ & BM_BCH_FLASH0LAYOUT0_ECC0) \
+ )
#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
(0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
-#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v) \
- (((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\
- & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
+ (0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x) \
+ (GPMI_IS_MX6Q(x) \
+ ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
+ : ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
+ )
#define HW_BCH_FLASH0LAYOUT1 0x00000090
@@ -72,13 +83,24 @@
#define BP_BCH_FLASH0LAYOUT1_ECCN 12
#define BM_BCH_FLASH0LAYOUT1_ECCN (0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
-#define BF_BCH_FLASH0LAYOUT1_ECCN(v) \
- (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN)
+#define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN 11
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v, x) \
+ (GPMI_IS_MX6Q(x) \
+ ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) \
+ & MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN) \
+ : (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) \
+ & BM_BCH_FLASH0LAYOUT1_ECCN) \
+ )
#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
(0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
-#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v) \
- (((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
- & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
+ (0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x) \
+ (GPMI_IS_MX6Q(x) \
+ ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
+ : ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
+ )
#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index e8ea7107932e..a1f43329ad43 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -21,7 +21,6 @@
#include <linux/mtd/gpmi-nand.h>
#include <linux/delay.h>
#include <linux/clk.h>
-#include <mach/mxs.h>
#include "gpmi-nand.h"
#include "gpmi-regs.h"
@@ -37,6 +36,8 @@ struct timing_threshod timing_default_threshold = {
.max_dll_delay_in_ns = 16,
};
+#define MXS_SET_ADDR 0x4
+#define MXS_CLR_ADDR 0x8
/*
* Clear the bit and poll it cleared. This is usually called with
* a reset address and mask being either SFTRST(bit 31) or CLKGATE
@@ -47,7 +48,7 @@ static int clear_poll_bit(void __iomem *addr, u32 mask)
int timeout = 0x400;
/* clear the bit */
- __mxs_clrl(mask, addr);
+ writel(mask, addr + MXS_CLR_ADDR);
/*
* SFTRST needs 3 GPMI clocks to settle, the reference manual
@@ -92,11 +93,11 @@ static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
goto error;
/* clear CLKGATE */
- __mxs_clrl(MODULE_CLKGATE, reset_addr);
+ writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
if (!just_enable) {
/* set SFTRST to reset the block */
- __mxs_setl(MODULE_SFTRST, reset_addr);
+ writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR);
udelay(1);
/* poll CLKGATE becoming set */
@@ -223,13 +224,13 @@ int bch_set_geometry(struct gpmi_nand_data *this)
/* Configure layout 0. */
writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
| BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
- | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength)
- | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size),
+ | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this)
+ | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this),
r->bch_regs + HW_BCH_FLASH0LAYOUT0);
writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
- | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength)
- | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size),
+ | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this)
+ | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
r->bch_regs + HW_BCH_FLASH0LAYOUT1);
/* Set *all* chip selects to use layout 0. */
@@ -255,11 +256,12 @@ static unsigned int ns_to_cycles(unsigned int time,
return max(k, min);
}
+#define DEF_MIN_PROP_DELAY 5
+#define DEF_MAX_PROP_DELAY 9
/* Apply timing to current hardware conditions. */
static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
struct gpmi_nfc_hardware_timing *hw)
{
- struct gpmi_nand_platform_data *pdata = this->pdata;
struct timing_threshod *nfc = &timing_default_threshold;
struct nand_chip *nand = &this->nand;
struct nand_timing target = this->timing;
@@ -276,8 +278,8 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
int ideal_sample_delay_in_ns;
unsigned int sample_delay_factor;
int tEYE;
- unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
- unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+ unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY;
+ unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY;
/*
* If there are multiple chips, we need to relax the timings to allow
@@ -803,7 +805,8 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
if (GPMI_IS_MX23(this)) {
mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
- } else if (GPMI_IS_MX28(this)) {
+ } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) {
+ /* MX28 shares the same R/B register as MX6Q. */
mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
reg = readl(r->gpmi_regs + HW_GPMI_STAT);
} else
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index b68e04310bd8..a05b7b444d4f 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -25,6 +25,8 @@
#include <linux/mtd/gpmi-nand.h>
#include <linux/mtd/partitions.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include "gpmi-nand.h"
/* add our owner bbt descriptor */
@@ -387,7 +389,7 @@ static void release_bch_irq(struct gpmi_nand_data *this)
static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
{
struct gpmi_nand_data *this = param;
- struct resource *r = this->private;
+ int dma_channel = (int)this->private;
if (!mxs_dma_is_apbh(chan))
return false;
@@ -399,7 +401,7 @@ static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
* for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
* (These eight channels share the same IRQ!)
*/
- if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+ if (dma_channel == chan->chan_id) {
chan->private = &this->dma_data;
return true;
}
@@ -419,57 +421,45 @@ static void release_dma_channels(struct gpmi_nand_data *this)
static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
{
struct platform_device *pdev = this->pdev;
- struct gpmi_nand_platform_data *pdata = this->pdata;
- struct resources *res = &this->resources;
- struct resource *r, *r_dma;
- unsigned int i;
+ struct resource *r_dma;
+ struct device_node *dn;
+ int dma_channel;
+ unsigned int ret;
+ struct dma_chan *dma_chan;
+ dma_cap_mask_t mask;
+
+ /* dma channel, we only use the first one. */
+ dn = pdev->dev.of_node;
+ ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel);
+ if (ret) {
+ pr_err("unable to get DMA channel from dt.\n");
+ goto acquire_err;
+ }
+ this->private = (void *)dma_channel;
- r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- GPMI_NAND_DMA_CHANNELS_RES_NAME);
+ /* gpmi dma interrupt */
r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
GPMI_NAND_DMA_INTERRUPT_RES_NAME);
- if (!r || !r_dma) {
+ if (!r_dma) {
pr_err("Can't get resource for DMA\n");
- return -ENXIO;
+ goto acquire_err;
}
+ this->dma_data.chan_irq = r_dma->start;
- /* used in gpmi_dma_filter() */
- this->private = r;
-
- for (i = r->start; i <= r->end; i++) {
- struct dma_chan *dma_chan;
- dma_cap_mask_t mask;
+ /* request dma channel */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
- if (i - r->start >= pdata->max_chip_count)
- break;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- /* get the DMA interrupt */
- if (r_dma->start == r_dma->end) {
- /* only register the first. */
- if (i == r->start)
- this->dma_data.chan_irq = r_dma->start;
- else
- this->dma_data.chan_irq = NO_IRQ;
- } else
- this->dma_data.chan_irq = r_dma->start + (i - r->start);
-
- dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
- if (!dma_chan)
- goto acquire_err;
-
- /* fill the first empty item */
- this->dma_chans[i - r->start] = dma_chan;
+ dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+ if (!dma_chan) {
+ pr_err("dma_request_channel failed.\n");
+ goto acquire_err;
}
- res->dma_low_channel = r->start;
- res->dma_high_channel = i;
+ this->dma_chans[0] = dma_chan;
return 0;
acquire_err:
- pr_err("Can't acquire DMA channel %u\n", i);
release_dma_channels(this);
return -EINVAL;
}
@@ -851,7 +841,7 @@ static void block_mark_swapping(struct gpmi_nand_data *this,
}
static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
struct gpmi_nand_data *this = chip->priv;
struct bch_geometry *nfc_geo = &this->bch_geometry;
@@ -917,28 +907,31 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
mtd->ecc_stats.corrected += corrected;
}
- /*
- * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
- * details about our policy for delivering the OOB.
- *
- * We fill the caller's buffer with set bits, and then copy the block
- * mark to th caller's buffer. Note that, if block mark swapping was
- * necessary, it has already been done, so we can rely on the first
- * byte of the auxiliary buffer to contain the block mark.
- */
- memset(chip->oob_poi, ~0, mtd->oobsize);
- chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+ if (oob_required) {
+ /*
+ * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()
+ * for details about our policy for delivering the OOB.
+ *
+ * We fill the caller's buffer with set bits, and then copy the
+ * block mark to th caller's buffer. Note that, if block mark
+ * swapping was necessary, it has already been done, so we can
+ * rely on the first byte of the auxiliary buffer to contain
+ * the block mark.
+ */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
- read_page_swap_end(this, buf, mtd->writesize,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ }
exit_nfc:
return ret;
}
-static void gpmi_ecc_write_page(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
struct gpmi_nand_data *this = chip->priv;
struct bch_geometry *nfc_geo = &this->bch_geometry;
@@ -1077,7 +1070,7 @@ exit_auxiliary:
* this driver.
*/
static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
struct gpmi_nand_data *this = chip->priv;
@@ -1100,11 +1093,7 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
chip->oob_poi[0] = chip->read_byte(mtd);
}
- /*
- * Return true, indicating that the next call to this function must send
- * a command.
- */
- return true;
+ return 0;
}
static int
@@ -1318,7 +1307,7 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
/* Write the first page of the current stride. */
dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
- chip->ecc.write_page_raw(mtd, chip, buffer);
+ chip->ecc.write_page_raw(mtd, chip, buffer, 0);
chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
/* Wait for the write to finish. */
@@ -1444,6 +1433,10 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
if (ret)
return ret;
+ /* Adjust the ECC strength according to the chip. */
+ this->nand.ecc.strength = this->bch_geometry.ecc_strength;
+ this->mtd.ecc_strength = this->bch_geometry.ecc_strength;
+
/* NAND boot init, depends on the gpmi_set_geometry(). */
return nand_boot_init(this);
}
@@ -1471,9 +1464,9 @@ void gpmi_nfc_exit(struct gpmi_nand_data *this)
static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
{
- struct gpmi_nand_platform_data *pdata = this->pdata;
struct mtd_info *mtd = &this->mtd;
struct nand_chip *chip = &this->nand;
+ struct mtd_part_parser_data ppdata = {};
int ret;
/* init current chip */
@@ -1502,6 +1495,7 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
chip->options |= NAND_NO_SUBPAGE_WRITE;
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 1;
+ chip->ecc.strength = 8;
chip->ecc.layout = &gpmi_hw_ecclayout;
/* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
@@ -1511,14 +1505,14 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
if (ret)
goto err_out;
- ret = nand_scan(mtd, pdata->max_chip_count);
+ ret = nand_scan(mtd, 1);
if (ret) {
pr_err("Chip scan failed\n");
goto err_out;
}
- ret = mtd_device_parse_register(mtd, NULL, NULL,
- pdata->partitions, pdata->partition_count);
+ ppdata.of_node = this->pdev->dev.of_node;
+ ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (ret)
goto err_out;
return 0;
@@ -1528,12 +1522,41 @@ err_out:
return ret;
}
+static const struct platform_device_id gpmi_ids[] = {
+ { .name = "imx23-gpmi-nand", .driver_data = IS_MX23, },
+ { .name = "imx28-gpmi-nand", .driver_data = IS_MX28, },
+ { .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, },
+ {},
+};
+
+static const struct of_device_id gpmi_nand_id_table[] = {
+ {
+ .compatible = "fsl,imx23-gpmi-nand",
+ .data = (void *)&gpmi_ids[IS_MX23]
+ }, {
+ .compatible = "fsl,imx28-gpmi-nand",
+ .data = (void *)&gpmi_ids[IS_MX28]
+ }, {
+ .compatible = "fsl,imx6q-gpmi-nand",
+ .data = (void *)&gpmi_ids[IS_MX6Q]
+ }, {}
+};
+MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
+
static int __devinit gpmi_nand_probe(struct platform_device *pdev)
{
- struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
struct gpmi_nand_data *this;
+ const struct of_device_id *of_id;
int ret;
+ of_id = of_match_device(gpmi_nand_id_table, &pdev->dev);
+ if (of_id) {
+ pdev->id_entry = of_id->data;
+ } else {
+ pr_err("Failed to find the right device id.\n");
+ return -ENOMEM;
+ }
+
this = kzalloc(sizeof(*this), GFP_KERNEL);
if (!this) {
pr_err("Failed to allocate per-device memory\n");
@@ -1543,13 +1566,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, this);
this->pdev = pdev;
this->dev = &pdev->dev;
- this->pdata = pdata;
-
- if (pdata->platform_init) {
- ret = pdata->platform_init();
- if (ret)
- goto platform_init_error;
- }
ret = acquire_resources(this);
if (ret)
@@ -1567,7 +1583,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
exit_nfc_init:
release_resources(this);
-platform_init_error:
exit_acquire_resources:
platform_set_drvdata(pdev, NULL);
kfree(this);
@@ -1585,19 +1600,10 @@ static int __exit gpmi_nand_remove(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id gpmi_ids[] = {
- {
- .name = "imx23-gpmi-nand",
- .driver_data = IS_MX23,
- }, {
- .name = "imx28-gpmi-nand",
- .driver_data = IS_MX28,
- }, {},
-};
-
static struct platform_driver gpmi_nand_driver = {
.driver = {
.name = "gpmi-nand",
+ .of_match_table = gpmi_nand_id_table,
},
.probe = gpmi_nand_probe,
.remove = __exit_p(gpmi_nand_remove),
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index ec6180d4ff8f..ce5daa160920 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -266,8 +266,10 @@ extern int gpmi_read_page(struct gpmi_nand_data *,
#define STATUS_UNCORRECTABLE 0xfe
/* Use the platform_id to distinguish different Archs. */
-#define IS_MX23 0x1
-#define IS_MX28 0x2
+#define IS_MX23 0x0
+#define IS_MX28 0x1
+#define IS_MX6Q 0x2
#define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23)
#define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28)
+#define GPMI_IS_MX6Q(x) ((x)->pdev->id_entry->driver_data == IS_MX6Q)
#endif
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 9bf5ce5fa22d..50166e93ba96 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -124,7 +124,6 @@ static int __init h1910_init(void)
/* 15 us command delay time */
this->chip_delay = 50;
this->ecc.mode = NAND_ECC_SOFT;
- this->options = NAND_NO_AUTOINCR;
/* Scan to find existence of the device */
if (nand_scan(h1910_nand_mtd, 1)) {
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index e4147e8acb7c..a6fa884ae49b 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -332,11 +332,7 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
chip->ecc.mode = NAND_ECC_HW_OOB_FIRST;
chip->ecc.size = 512;
chip->ecc.bytes = 9;
- chip->ecc.strength = 2;
- /*
- * FIXME: ecc_strength value of 2 bits per 512 bytes of data is a
- * conservative guess, given 9 ecc bytes and reed-solomon alg.
- */
+ chip->ecc.strength = 4;
if (pdata)
chip->ecc.layout = pdata->ecc_layout;
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index c240cf1af961..c259c24d7986 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -734,7 +734,6 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
chip->write_buf = mpc5121_nfc_write_buf;
chip->verify_buf = mpc5121_nfc_verify_buf;
chip->select_chip = mpc5121_nfc_select_chip;
- chip->options = NAND_NO_AUTOINCR;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 9e374e9bd296..c58e6a93f445 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -32,6 +32,8 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/completion.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
#include <asm/mach/flash.h>
#include <mach/mxc_nand.h>
@@ -140,13 +142,47 @@
#define NFC_V3_DELAY_LINE (host->regs_ip + 0x34)
+struct mxc_nand_host;
+
+struct mxc_nand_devtype_data {
+ void (*preset)(struct mtd_info *);
+ void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_page)(struct mtd_info *, unsigned int);
+ void (*send_read_id)(struct mxc_nand_host *);
+ uint16_t (*get_dev_status)(struct mxc_nand_host *);
+ int (*check_int)(struct mxc_nand_host *);
+ void (*irq_control)(struct mxc_nand_host *, int);
+ u32 (*get_ecc_status)(struct mxc_nand_host *);
+ struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ int (*correct_data)(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc);
+
+ /*
+ * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked
+ * (CONFIG1:INT_MSK is set). To handle this the driver uses
+ * enable_irq/disable_irq_nosync instead of CONFIG1:INT_MSK
+ */
+ int irqpending_quirk;
+ int needs_ip;
+
+ size_t regs_offset;
+ size_t spare0_offset;
+ size_t axi_offset;
+
+ int spare_len;
+ int eccbytes;
+ int eccsize;
+};
+
struct mxc_nand_host {
struct mtd_info mtd;
struct nand_chip nand;
struct device *dev;
- void *spare0;
- void *main_area0;
+ void __iomem *spare0;
+ void __iomem *main_area0;
void __iomem *base;
void __iomem *regs;
@@ -163,16 +199,9 @@ struct mxc_nand_host {
uint8_t *data_buf;
unsigned int buf_start;
- int spare_len;
-
- void (*preset)(struct mtd_info *);
- void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
- void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
- void (*send_page)(struct mtd_info *, unsigned int);
- void (*send_read_id)(struct mxc_nand_host *);
- uint16_t (*get_dev_status)(struct mxc_nand_host *);
- int (*check_int)(struct mxc_nand_host *);
- void (*irq_control)(struct mxc_nand_host *, int);
+
+ const struct mxc_nand_devtype_data *devtype_data;
+ struct mxc_nand_platform_data pdata;
};
/* OOB placement block for use with hardware ecc generation */
@@ -242,21 +271,7 @@ static struct nand_ecclayout nandv2_hw_eccoob_4k = {
}
};
-static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
-{
- struct mxc_nand_host *host = dev_id;
-
- if (!host->check_int(host))
- return IRQ_NONE;
-
- host->irq_control(host, 0);
-
- complete(&host->op_completion);
-
- return IRQ_HANDLED;
-}
+static const char *part_probes[] = { "RedBoot", "cmdlinepart", "ofpart", NULL };
static int check_int_v3(struct mxc_nand_host *host)
{
@@ -280,26 +295,12 @@ static int check_int_v1_v2(struct mxc_nand_host *host)
if (!(tmp & NFC_V1_V2_CONFIG2_INT))
return 0;
- if (!cpu_is_mx21())
+ if (!host->devtype_data->irqpending_quirk)
writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
return 1;
}
-/*
- * It has been observed that the i.MX21 cannot read the CONFIG2:INT bit
- * if interrupts are masked (CONFIG1:INT_MSK is set). To handle this, the
- * driver can enable/disable the irq line rather than simply masking the
- * interrupts.
- */
-static void irq_control_mx21(struct mxc_nand_host *host, int activate)
-{
- if (activate)
- enable_irq(host->irq);
- else
- disable_irq_nosync(host->irq);
-}
-
static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
{
uint16_t tmp;
@@ -328,6 +329,47 @@ static void irq_control_v3(struct mxc_nand_host *host, int activate)
writel(tmp, NFC_V3_CONFIG2);
}
+static void irq_control(struct mxc_nand_host *host, int activate)
+{
+ if (host->devtype_data->irqpending_quirk) {
+ if (activate)
+ enable_irq(host->irq);
+ else
+ disable_irq_nosync(host->irq);
+ } else {
+ host->devtype_data->irq_control(host, activate);
+ }
+}
+
+static u32 get_ecc_status_v1(struct mxc_nand_host *host)
+{
+ return readw(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v2(struct mxc_nand_host *host)
+{
+ return readl(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v3(struct mxc_nand_host *host)
+{
+ return readl(NFC_V3_ECC_STATUS_RESULT);
+}
+
+static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
+{
+ struct mxc_nand_host *host = dev_id;
+
+ if (!host->devtype_data->check_int(host))
+ return IRQ_NONE;
+
+ irq_control(host, 0);
+
+ complete(&host->op_completion);
+
+ return IRQ_HANDLED;
+}
+
/* This function polls the NANDFC to wait for the basic operation to
* complete by checking the INT bit of config2 register.
*/
@@ -336,14 +378,14 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq)
int max_retries = 8000;
if (useirq) {
- if (!host->check_int(host)) {
+ if (!host->devtype_data->check_int(host)) {
INIT_COMPLETION(host->op_completion);
- host->irq_control(host, 1);
+ irq_control(host, 1);
wait_for_completion(&host->op_completion);
}
} else {
while (max_retries-- > 0) {
- if (host->check_int(host))
+ if (host->devtype_data->check_int(host))
break;
udelay(1);
@@ -374,7 +416,7 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
writew(cmd, NFC_V1_V2_FLASH_CMD);
writew(NFC_CMD, NFC_V1_V2_CONFIG2);
- if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) {
+ if (host->devtype_data->irqpending_quirk && (cmd == NAND_CMD_RESET)) {
int max_retries = 100;
/* Reset completion is indicated by NFC_CONFIG2 */
/* being set to 0 */
@@ -433,13 +475,27 @@ static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
wait_op_done(host, false);
}
-static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
+static void send_page_v2(struct mtd_info *mtd, unsigned int ops)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ /* NANDFC buffer 0 is used for page read/write */
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+
+ writew(ops, NFC_V1_V2_CONFIG2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, true);
+}
+
+static void send_page_v1(struct mtd_info *mtd, unsigned int ops)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
int bufs, i;
- if (nfc_is_v1() && mtd->writesize > 512)
+ if (mtd->writesize > 512)
bufs = 4;
else
bufs = 1;
@@ -463,7 +519,7 @@ static void send_read_id_v3(struct mxc_nand_host *host)
wait_op_done(host, true);
- memcpy(host->data_buf, host->main_area0, 16);
+ memcpy_fromio(host->data_buf, host->main_area0, 16);
}
/* Request the NANDFC to perform a read of the NAND device ID. */
@@ -479,7 +535,7 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host)
/* Wait for operation to complete */
wait_op_done(host, true);
- memcpy(host->data_buf, host->main_area0, 16);
+ memcpy_fromio(host->data_buf, host->main_area0, 16);
if (this->options & NAND_BUSWIDTH_16) {
/* compress the ID info */
@@ -555,7 +611,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
* additional correction. 2-Bit errors cannot be corrected by
* HW ECC, so we need to return failure
*/
- uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
+ uint16_t ecc_status = get_ecc_status_v1(host);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
@@ -580,10 +636,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
no_subpages = mtd->writesize >> 9;
- if (nfc_is_v21())
- ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT);
- else
- ecc_stat = readl(NFC_V3_ECC_STATUS_RESULT);
+ ecc_stat = host->devtype_data->get_ecc_status(host);
do {
err = ecc_stat & ecc_bit_mask;
@@ -616,7 +669,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
/* Check for status request */
if (host->status_request)
- return host->get_dev_status(host) & 0xFF;
+ return host->devtype_data->get_dev_status(host) & 0xFF;
ret = *(uint8_t *)(host->data_buf + host->buf_start);
host->buf_start++;
@@ -682,7 +735,7 @@ static int mxc_nand_verify_buf(struct mtd_info *mtd,
/* This function is used by upper layer for select and
* deselect of the NAND chip */
-static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
+static void mxc_nand_select_chip_v1_v3(struct mtd_info *mtd, int chip)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
@@ -701,11 +754,30 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
clk_prepare_enable(host->clk);
host->clk_act = 1;
}
+}
- if (nfc_is_v21()) {
- host->active_cs = chip;
- writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ if (chip == -1) {
+ /* Disable the NFC clock */
+ if (host->clk_act) {
+ clk_disable(host->clk);
+ host->clk_act = 0;
+ }
+ return;
+ }
+
+ if (!host->clk_act) {
+ /* Enable the NFC clock */
+ clk_enable(host->clk);
+ host->clk_act = 1;
}
+
+ host->active_cs = chip;
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
}
/*
@@ -718,23 +790,23 @@ static void copy_spare(struct mtd_info *mtd, bool bfrom)
u16 i, j;
u16 n = mtd->writesize >> 9;
u8 *d = host->data_buf + mtd->writesize;
- u8 *s = host->spare0;
- u16 t = host->spare_len;
+ u8 __iomem *s = host->spare0;
+ u16 t = host->devtype_data->spare_len;
j = (mtd->oobsize / n >> 1) << 1;
if (bfrom) {
for (i = 0; i < n - 1; i++)
- memcpy(d + i * j, s + i * t, j);
+ memcpy_fromio(d + i * j, s + i * t, j);
/* the last section */
- memcpy(d + i * j, s + i * t, mtd->oobsize - i * j);
+ memcpy_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
} else {
for (i = 0; i < n - 1; i++)
- memcpy(&s[i * t], &d[i * j], j);
+ memcpy_toio(&s[i * t], &d[i * j], j);
/* the last section */
- memcpy(&s[i * t], &d[i * j], mtd->oobsize - i * j);
+ memcpy_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
}
}
@@ -751,34 +823,44 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
* perform a read/write buf operation, the saved column
* address is used to index into the full page.
*/
- host->send_addr(host, 0, page_addr == -1);
+ host->devtype_data->send_addr(host, 0, page_addr == -1);
if (mtd->writesize > 512)
/* another col addr cycle for 2k page */
- host->send_addr(host, 0, false);
+ host->devtype_data->send_addr(host, 0, false);
}
/* Write out page address, if necessary */
if (page_addr != -1) {
/* paddr_0 - p_addr_7 */
- host->send_addr(host, (page_addr & 0xff), false);
+ host->devtype_data->send_addr(host, (page_addr & 0xff), false);
if (mtd->writesize > 512) {
if (mtd->size >= 0x10000000) {
/* paddr_8 - paddr_15 */
- host->send_addr(host, (page_addr >> 8) & 0xff, false);
- host->send_addr(host, (page_addr >> 16) & 0xff, true);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff,
+ false);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 16) & 0xff,
+ true);
} else
/* paddr_8 - paddr_15 */
- host->send_addr(host, (page_addr >> 8) & 0xff, true);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff, true);
} else {
/* One more address cycle for higher density devices */
if (mtd->size >= 0x4000000) {
/* paddr_8 - paddr_15 */
- host->send_addr(host, (page_addr >> 8) & 0xff, false);
- host->send_addr(host, (page_addr >> 16) & 0xff, true);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff,
+ false);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 16) & 0xff,
+ true);
} else
/* paddr_8 - paddr_15 */
- host->send_addr(host, (page_addr >> 8) & 0xff, true);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff, true);
}
}
}
@@ -800,7 +882,35 @@ static int get_eccsize(struct mtd_info *mtd)
return 8;
}
-static void preset_v1_v2(struct mtd_info *mtd)
+static void preset_v1(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t config1 = 0;
+
+ if (nand_chip->ecc.mode == NAND_ECC_HW)
+ config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
+
+ if (!host->devtype_data->irqpending_quirk)
+ config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+ host->eccsize = 1;
+
+ writew(config1, NFC_V1_V2_CONFIG1);
+ /* preset operation */
+
+ /* Unlock the internal RAM Buffer */
+ writew(0x2, NFC_V1_V2_CONFIG);
+
+ /* Blocks to be unlocked */
+ writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
+ writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
+
+ /* Unlock Block Command for given address range */
+ writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v2(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
@@ -809,13 +919,12 @@ static void preset_v1_v2(struct mtd_info *mtd)
if (nand_chip->ecc.mode == NAND_ECC_HW)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
- if (nfc_is_v21())
- config1 |= NFC_V2_CONFIG1_FP_INT;
+ config1 |= NFC_V2_CONFIG1_FP_INT;
- if (!cpu_is_mx21())
+ if (!host->devtype_data->irqpending_quirk)
config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
- if (nfc_is_v21() && mtd->writesize) {
+ if (mtd->writesize) {
uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
host->eccsize = get_eccsize(mtd);
@@ -834,20 +943,14 @@ static void preset_v1_v2(struct mtd_info *mtd)
writew(0x2, NFC_V1_V2_CONFIG);
/* Blocks to be unlocked */
- if (nfc_is_v21()) {
- writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0);
- writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1);
- writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2);
- writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3);
- writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0);
- writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1);
- writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2);
- writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
- } else if (nfc_is_v1()) {
- writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
- writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
- } else
- BUG();
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
/* Unlock Block Command for given address range */
writew(0x4, NFC_V1_V2_WRPROT);
@@ -937,15 +1040,15 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
/* Command pre-processing step */
switch (command) {
case NAND_CMD_RESET:
- host->preset(mtd);
- host->send_cmd(host, command, false);
+ host->devtype_data->preset(mtd);
+ host->devtype_data->send_cmd(host, command, false);
break;
case NAND_CMD_STATUS:
host->buf_start = 0;
host->status_request = true;
- host->send_cmd(host, command, true);
+ host->devtype_data->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
@@ -958,15 +1061,16 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
command = NAND_CMD_READ0; /* only READ0 is valid */
- host->send_cmd(host, command, false);
+ host->devtype_data->send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
if (mtd->writesize > 512)
- host->send_cmd(host, NAND_CMD_READSTART, true);
+ host->devtype_data->send_cmd(host,
+ NAND_CMD_READSTART, true);
- host->send_page(mtd, NFC_OUTPUT);
+ host->devtype_data->send_page(mtd, NFC_OUTPUT);
- memcpy(host->data_buf, host->main_area0, mtd->writesize);
+ memcpy_fromio(host->data_buf, host->main_area0, mtd->writesize);
copy_spare(mtd, true);
break;
@@ -977,28 +1081,28 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
host->buf_start = column;
- host->send_cmd(host, command, false);
+ host->devtype_data->send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
case NAND_CMD_PAGEPROG:
- memcpy(host->main_area0, host->data_buf, mtd->writesize);
+ memcpy_toio(host->main_area0, host->data_buf, mtd->writesize);
copy_spare(mtd, false);
- host->send_page(mtd, NFC_INPUT);
- host->send_cmd(host, command, true);
+ host->devtype_data->send_page(mtd, NFC_INPUT);
+ host->devtype_data->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
case NAND_CMD_READID:
- host->send_cmd(host, command, true);
+ host->devtype_data->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
- host->send_read_id(host);
+ host->devtype_data->send_read_id(host);
host->buf_start = column;
break;
case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
- host->send_cmd(host, command, false);
+ host->devtype_data->send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
@@ -1032,15 +1136,191 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = mirror_pattern,
};
+/* v1 + irqpending_quirk: i.MX21 */
+static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
+ .preset = preset_v1,
+ .send_cmd = send_cmd_v1_v2,
+ .send_addr = send_addr_v1_v2,
+ .send_page = send_page_v1,
+ .send_read_id = send_read_id_v1_v2,
+ .get_dev_status = get_dev_status_v1_v2,
+ .check_int = check_int_v1_v2,
+ .irq_control = irq_control_v1_v2,
+ .get_ecc_status = get_ecc_status_v1,
+ .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv1_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v1,
+ .irqpending_quirk = 1,
+ .needs_ip = 0,
+ .regs_offset = 0xe00,
+ .spare0_offset = 0x800,
+ .spare_len = 16,
+ .eccbytes = 3,
+ .eccsize = 1,
+};
+
+/* v1 + !irqpending_quirk: i.MX27, i.MX31 */
+static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
+ .preset = preset_v1,
+ .send_cmd = send_cmd_v1_v2,
+ .send_addr = send_addr_v1_v2,
+ .send_page = send_page_v1,
+ .send_read_id = send_read_id_v1_v2,
+ .get_dev_status = get_dev_status_v1_v2,
+ .check_int = check_int_v1_v2,
+ .irq_control = irq_control_v1_v2,
+ .get_ecc_status = get_ecc_status_v1,
+ .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv1_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v1,
+ .irqpending_quirk = 0,
+ .needs_ip = 0,
+ .regs_offset = 0xe00,
+ .spare0_offset = 0x800,
+ .axi_offset = 0,
+ .spare_len = 16,
+ .eccbytes = 3,
+ .eccsize = 1,
+};
+
+/* v21: i.MX25, i.MX35 */
+static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
+ .preset = preset_v2,
+ .send_cmd = send_cmd_v1_v2,
+ .send_addr = send_addr_v1_v2,
+ .send_page = send_page_v2,
+ .send_read_id = send_read_id_v1_v2,
+ .get_dev_status = get_dev_status_v1_v2,
+ .check_int = check_int_v1_v2,
+ .irq_control = irq_control_v1_v2,
+ .get_ecc_status = get_ecc_status_v2,
+ .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv2_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv2_hw_eccoob_4k,
+ .select_chip = mxc_nand_select_chip_v2,
+ .correct_data = mxc_nand_correct_data_v2_v3,
+ .irqpending_quirk = 0,
+ .needs_ip = 0,
+ .regs_offset = 0x1e00,
+ .spare0_offset = 0x1000,
+ .axi_offset = 0,
+ .spare_len = 64,
+ .eccbytes = 9,
+ .eccsize = 0,
+};
+
+/* v3: i.MX51, i.MX53 */
+static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
+ .preset = preset_v3,
+ .send_cmd = send_cmd_v3,
+ .send_addr = send_addr_v3,
+ .send_page = send_page_v3,
+ .send_read_id = send_read_id_v3,
+ .get_dev_status = get_dev_status_v3,
+ .check_int = check_int_v3,
+ .irq_control = irq_control_v3,
+ .get_ecc_status = get_ecc_status_v3,
+ .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv2_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v2_v3,
+ .irqpending_quirk = 0,
+ .needs_ip = 1,
+ .regs_offset = 0,
+ .spare0_offset = 0x1000,
+ .axi_offset = 0x1e00,
+ .spare_len = 64,
+ .eccbytes = 0,
+ .eccsize = 0,
+};
+
+#ifdef CONFIG_OF_MTD
+static const struct of_device_id mxcnd_dt_ids[] = {
+ {
+ .compatible = "fsl,imx21-nand",
+ .data = &imx21_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx27-nand",
+ .data = &imx27_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx25-nand",
+ .data = &imx25_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx51-nand",
+ .data = &imx51_nand_devtype_data,
+ },
+ { /* sentinel */ }
+};
+
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+ struct device_node *np = host->dev->of_node;
+ struct mxc_nand_platform_data *pdata = &host->pdata;
+ const struct of_device_id *of_id =
+ of_match_device(mxcnd_dt_ids, host->dev);
+ int buswidth;
+
+ if (!np)
+ return 1;
+
+ if (of_get_nand_ecc_mode(np) >= 0)
+ pdata->hw_ecc = 1;
+
+ pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
+
+ buswidth = of_get_nand_bus_width(np);
+ if (buswidth < 0)
+ return buswidth;
+
+ pdata->width = buswidth / 8;
+
+ host->devtype_data = of_id->data;
+
+ return 0;
+}
+#else
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+ return 1;
+}
+#endif
+
+static int __init mxcnd_probe_pdata(struct mxc_nand_host *host)
+{
+ struct mxc_nand_platform_data *pdata = host->dev->platform_data;
+
+ if (!pdata)
+ return -ENODEV;
+
+ host->pdata = *pdata;
+
+ if (nfc_is_v1()) {
+ if (cpu_is_mx21())
+ host->devtype_data = &imx21_nand_devtype_data;
+ else
+ host->devtype_data = &imx27_nand_devtype_data;
+ } else if (nfc_is_v21()) {
+ host->devtype_data = &imx25_nand_devtype_data;
+ } else if (nfc_is_v3_2()) {
+ host->devtype_data = &imx51_nand_devtype_data;
+ } else
+ BUG();
+
+ return 0;
+}
+
static int __init mxcnd_probe(struct platform_device *pdev)
{
struct nand_chip *this;
struct mtd_info *mtd;
- struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
struct mxc_nand_host *host;
struct resource *res;
int err = 0;
- struct nand_ecclayout *oob_smallpage, *oob_largepage;
/* Allocate memory for MTD device structure and private data */
host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE +
@@ -1065,7 +1345,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->priv = host;
this->dev_ready = mxc_nand_dev_ready;
this->cmdfunc = mxc_nand_command;
- this->select_chip = mxc_nand_select_chip;
this->read_byte = mxc_nand_read_byte;
this->read_word = mxc_nand_read_word;
this->write_buf = mxc_nand_write_buf;
@@ -1095,36 +1374,26 @@ static int __init mxcnd_probe(struct platform_device *pdev)
host->main_area0 = host->base;
- if (nfc_is_v1() || nfc_is_v21()) {
- host->preset = preset_v1_v2;
- host->send_cmd = send_cmd_v1_v2;
- host->send_addr = send_addr_v1_v2;
- host->send_page = send_page_v1_v2;
- host->send_read_id = send_read_id_v1_v2;
- host->get_dev_status = get_dev_status_v1_v2;
- host->check_int = check_int_v1_v2;
- if (cpu_is_mx21())
- host->irq_control = irq_control_mx21;
- else
- host->irq_control = irq_control_v1_v2;
- }
+ err = mxcnd_probe_dt(host);
+ if (err > 0)
+ err = mxcnd_probe_pdata(host);
+ if (err < 0)
+ goto eirq;
- if (nfc_is_v21()) {
- host->regs = host->base + 0x1e00;
- host->spare0 = host->base + 0x1000;
- host->spare_len = 64;
- oob_smallpage = &nandv2_hw_eccoob_smallpage;
- oob_largepage = &nandv2_hw_eccoob_largepage;
- this->ecc.bytes = 9;
- } else if (nfc_is_v1()) {
- host->regs = host->base + 0xe00;
- host->spare0 = host->base + 0x800;
- host->spare_len = 16;
- oob_smallpage = &nandv1_hw_eccoob_smallpage;
- oob_largepage = &nandv1_hw_eccoob_largepage;
- this->ecc.bytes = 3;
- host->eccsize = 1;
- } else if (nfc_is_v3_2()) {
+ if (host->devtype_data->regs_offset)
+ host->regs = host->base + host->devtype_data->regs_offset;
+ host->spare0 = host->base + host->devtype_data->spare0_offset;
+ if (host->devtype_data->axi_offset)
+ host->regs_axi = host->base + host->devtype_data->axi_offset;
+
+ this->ecc.bytes = host->devtype_data->eccbytes;
+ host->eccsize = host->devtype_data->eccsize;
+
+ this->select_chip = host->devtype_data->select_chip;
+ this->ecc.size = 512;
+ this->ecc.layout = host->devtype_data->ecclayout_512;
+
+ if (host->devtype_data->needs_ip) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res) {
err = -ENODEV;
@@ -1135,42 +1404,22 @@ static int __init mxcnd_probe(struct platform_device *pdev)
err = -ENOMEM;
goto eirq;
}
- host->regs_axi = host->base + 0x1e00;
- host->spare0 = host->base + 0x1000;
- host->spare_len = 64;
- host->preset = preset_v3;
- host->send_cmd = send_cmd_v3;
- host->send_addr = send_addr_v3;
- host->send_page = send_page_v3;
- host->send_read_id = send_read_id_v3;
- host->check_int = check_int_v3;
- host->get_dev_status = get_dev_status_v3;
- host->irq_control = irq_control_v3;
- oob_smallpage = &nandv2_hw_eccoob_smallpage;
- oob_largepage = &nandv2_hw_eccoob_largepage;
- } else
- BUG();
-
- this->ecc.size = 512;
- this->ecc.layout = oob_smallpage;
+ }
- if (pdata->hw_ecc) {
+ if (host->pdata.hw_ecc) {
this->ecc.calculate = mxc_nand_calculate_ecc;
this->ecc.hwctl = mxc_nand_enable_hwecc;
- if (nfc_is_v1())
- this->ecc.correct = mxc_nand_correct_data_v1;
- else
- this->ecc.correct = mxc_nand_correct_data_v2_v3;
+ this->ecc.correct = host->devtype_data->correct_data;
this->ecc.mode = NAND_ECC_HW;
} else {
this->ecc.mode = NAND_ECC_SOFT;
}
- /* NAND bus width determines access funtions used by upper layer */
- if (pdata->width == 2)
+ /* NAND bus width determines access functions used by upper layer */
+ if (host->pdata.width == 2)
this->options |= NAND_BUSWIDTH_16;
- if (pdata->flash_bbt) {
+ if (host->pdata.flash_bbt) {
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
/* update flash based bbt */
@@ -1182,28 +1431,25 @@ static int __init mxcnd_probe(struct platform_device *pdev)
host->irq = platform_get_irq(pdev, 0);
/*
- * mask the interrupt. For i.MX21 explicitely call
- * irq_control_v1_v2 to use the mask bit. We can't call
- * disable_irq_nosync() for an interrupt we do not own yet.
+ * Use host->devtype_data->irq_control() here instead of irq_control()
+ * because we must not disable_irq_nosync without having requested the
+ * irq.
*/
- if (cpu_is_mx21())
- irq_control_v1_v2(host, 0);
- else
- host->irq_control(host, 0);
+ host->devtype_data->irq_control(host, 0);
err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
if (err)
goto eirq;
- host->irq_control(host, 0);
-
/*
- * Now that the interrupt is disabled make sure the interrupt
- * mask bit is cleared on i.MX21. Otherwise we can't read
- * the interrupt status bit on this machine.
+ * Now that we "own" the interrupt make sure the interrupt mask bit is
+ * cleared on i.MX21. Otherwise we can't read the interrupt status bit
+ * on this machine.
*/
- if (cpu_is_mx21())
- irq_control_v1_v2(host, 1);
+ if (host->devtype_data->irqpending_quirk) {
+ disable_irq_nosync(host->irq);
+ host->devtype_data->irq_control(host, 1);
+ }
/* first scan to find the device and get the page size */
if (nand_scan_ident(mtd, nfc_is_v21() ? 4 : 1, NULL)) {
@@ -1212,18 +1458,12 @@ static int __init mxcnd_probe(struct platform_device *pdev)
}
/* Call preset again, with correct writesize this time */
- host->preset(mtd);
+ host->devtype_data->preset(mtd);
if (mtd->writesize == 2048)
- this->ecc.layout = oob_largepage;
- if (nfc_is_v21() && mtd->writesize == 4096)
- this->ecc.layout = &nandv2_hw_eccoob_4k;
-
- /* second phase scan */
- if (nand_scan_tail(mtd)) {
- err = -ENXIO;
- goto escan;
- }
+ this->ecc.layout = host->devtype_data->ecclayout_2k;
+ else if (mtd->writesize == 4096)
+ this->ecc.layout = host->devtype_data->ecclayout_4k;
if (this->ecc.mode == NAND_ECC_HW) {
if (nfc_is_v1())
@@ -1232,9 +1472,19 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
}
+ /* second phase scan */
+ if (nand_scan_tail(mtd)) {
+ err = -ENXIO;
+ goto escan;
+ }
+
/* Register the partitions */
- mtd_device_parse_register(mtd, part_probes, NULL, pdata->parts,
- pdata->nr_parts);
+ mtd_device_parse_register(mtd, part_probes,
+ &(struct mtd_part_parser_data){
+ .of_node = pdev->dev.of_node,
+ },
+ host->pdata.parts,
+ host->pdata.nr_parts);
platform_set_drvdata(pdev, host);
@@ -1275,6 +1525,8 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
static struct platform_driver mxcnd_driver = {
.driver = {
.name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mxcnd_dt_ids),
},
.remove = __devexit_p(mxcnd_remove),
};
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 47b19c0bb070..d47586cf64ce 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1066,15 +1066,17 @@ EXPORT_SYMBOL(nand_lock);
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
* @page: page number to read
*
* Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
chip->read_buf(mtd, buf, mtd->writesize);
- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ if (oob_required)
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
@@ -1083,13 +1085,14 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
* @page: page number to read
*
* We need a special oob layout and handling even when OOB isn't used.
*/
static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page)
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1126,10 +1129,11 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
* @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1138,8 +1142,9 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
uint32_t *eccpos = chip->ecc.layout->eccpos;
+ unsigned int max_bitflips = 0;
- chip->ecc.read_page_raw(mtd, chip, buf, page);
+ chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -1154,12 +1159,14 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
int stat;
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
- if (stat < 0)
+ if (stat < 0) {
mtd->ecc_stats.failed++;
- else
+ } else {
mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
}
- return 0;
+ return max_bitflips;
}
/**
@@ -1180,6 +1187,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
int index = 0;
+ unsigned int max_bitflips = 0;
/* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
@@ -1244,12 +1252,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
stat = chip->ecc.correct(mtd, p,
&chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
- if (stat < 0)
+ if (stat < 0) {
mtd->ecc_stats.failed++;
- else
+ } else {
mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
}
- return 0;
+ return max_bitflips;
}
/**
@@ -1257,12 +1267,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
* @page: page number to read
*
* Not for syndrome calculating ECC controllers which need a special oob layout.
*/
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1271,6 +1282,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
uint32_t *eccpos = chip->ecc.layout->eccpos;
+ unsigned int max_bitflips = 0;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
chip->ecc.hwctl(mtd, NAND_ECC_READ);
@@ -1289,12 +1301,14 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
int stat;
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
- if (stat < 0)
+ if (stat < 0) {
mtd->ecc_stats.failed++;
- else
+ } else {
mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
}
- return 0;
+ return max_bitflips;
}
/**
@@ -1302,6 +1316,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
* @page: page number to read
*
* Hardware ECC for large page chips, require OOB to be read first. For this
@@ -1311,7 +1326,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
* the data area, by overwriting the NAND manufacturer bad block markings.
*/
static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page)
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1320,6 +1335,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
uint8_t *ecc_code = chip->buffers->ecccode;
uint32_t *eccpos = chip->ecc.layout->eccpos;
uint8_t *ecc_calc = chip->buffers->ecccalc;
+ unsigned int max_bitflips = 0;
/* Read the OOB area first */
chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
@@ -1337,12 +1353,14 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
- if (stat < 0)
+ if (stat < 0) {
mtd->ecc_stats.failed++;
- else
+ } else {
mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
}
- return 0;
+ return max_bitflips;
}
/**
@@ -1350,19 +1368,21 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
* @page: page number to read
*
* The hw generator calculates the error syndrome automatically. Therefore we
* need a special oob layout and handling.
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *oob = chip->oob_poi;
+ unsigned int max_bitflips = 0;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
int stat;
@@ -1379,10 +1399,12 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
chip->read_buf(mtd, oob, eccbytes);
stat = chip->ecc.correct(mtd, p, oob, NULL);
- if (stat < 0)
+ if (stat < 0) {
mtd->ecc_stats.failed++;
- else
+ } else {
mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
oob += eccbytes;
@@ -1397,7 +1419,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
if (i)
chip->read_buf(mtd, oob, i);
- return 0;
+ return max_bitflips;
}
/**
@@ -1459,11 +1481,9 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
- int chipnr, page, realpage, col, bytes, aligned;
+ int chipnr, page, realpage, col, bytes, aligned, oob_required;
struct nand_chip *chip = mtd->priv;
struct mtd_ecc_stats stats;
- int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
- int sndcmd = 1;
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
@@ -1471,6 +1491,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
mtd->oobavail : mtd->oobsize;
uint8_t *bufpoi, *oob, *buf;
+ unsigned int max_bitflips = 0;
stats = mtd->ecc_stats;
@@ -1484,6 +1505,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
buf = ops->datbuf;
oob = ops->oobbuf;
+ oob_required = oob ? 1 : 0;
while (1) {
bytes = min(mtd->writesize - col, readlen);
@@ -1493,21 +1515,22 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
if (realpage != chip->pagebuf || oob) {
bufpoi = aligned ? buf : chip->buffers->databuf;
- if (likely(sndcmd)) {
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
- sndcmd = 0;
- }
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
- /* Now read the page into the buffer */
+ /*
+ * Now read the page into the buffer. Absent an error,
+ * the read methods return max bitflips per ecc step.
+ */
if (unlikely(ops->mode == MTD_OPS_RAW))
- ret = chip->ecc.read_page_raw(mtd, chip,
- bufpoi, page);
+ ret = chip->ecc.read_page_raw(mtd, chip, bufpoi,
+ oob_required,
+ page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
ret = chip->ecc.read_subpage(mtd, chip,
col, bytes, bufpoi);
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
- page);
+ oob_required, page);
if (ret < 0) {
if (!aligned)
/* Invalidate page cache */
@@ -1515,22 +1538,25 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
break;
}
+ max_bitflips = max_t(unsigned int, max_bitflips, ret);
+
/* Transfer not aligned data */
if (!aligned) {
if (!NAND_SUBPAGE_READ(chip) && !oob &&
!(mtd->ecc_stats.failed - stats.failed) &&
- (ops->mode != MTD_OPS_RAW))
+ (ops->mode != MTD_OPS_RAW)) {
chip->pagebuf = realpage;
- else
+ chip->pagebuf_bitflips = ret;
+ } else {
/* Invalidate page cache */
chip->pagebuf = -1;
+ }
memcpy(buf, chip->buffers->databuf + col, bytes);
}
buf += bytes;
if (unlikely(oob)) {
-
int toread = min(oobreadlen, max_oobsize);
if (toread) {
@@ -1541,13 +1567,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
}
if (!(chip->options & NAND_NO_READRDY)) {
- /*
- * Apply delay or wait for ready/busy pin. Do
- * this before the AUTOINCR check, so no
- * problems arise if a chip which does auto
- * increment is marked as NOAUTOINCR by the
- * board driver.
- */
+ /* Apply delay or wait for ready/busy pin */
if (!chip->dev_ready)
udelay(chip->chip_delay);
else
@@ -1556,6 +1576,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
+ max_bitflips = max_t(unsigned int, max_bitflips,
+ chip->pagebuf_bitflips);
}
readlen -= bytes;
@@ -1575,26 +1597,19 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
chip->select_chip(mtd, -1);
chip->select_chip(mtd, chipnr);
}
-
- /*
- * Check, if the chip supports auto page increment or if we
- * have hit a block boundary.
- */
- if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
- sndcmd = 1;
}
ops->retlen = ops->len - (size_t) readlen;
if (oob)
ops->oobretlen = ops->ooblen - oobreadlen;
- if (ret)
+ if (ret < 0)
return ret;
if (mtd->ecc_stats.failed - stats.failed)
return -EBADMSG;
- return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+ return max_bitflips;
}
/**
@@ -1630,17 +1645,13 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @page: page number to read
- * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
- if (sndcmd) {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
- sndcmd = 0;
- }
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- return sndcmd;
+ return 0;
}
/**
@@ -1649,10 +1660,9 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @page: page number to read
- * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
uint8_t *buf = chip->oob_poi;
int length = mtd->oobsize;
@@ -1679,7 +1689,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
if (length > 0)
chip->read_buf(mtd, bufpoi, length);
- return 1;
+ return 0;
}
/**
@@ -1775,13 +1785,13 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd,
static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
- int page, realpage, chipnr, sndcmd = 1;
+ int page, realpage, chipnr;
struct nand_chip *chip = mtd->priv;
struct mtd_ecc_stats stats;
- int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
int readlen = ops->ooblen;
int len;
uint8_t *buf = ops->oobbuf;
+ int ret = 0;
pr_debug("%s: from = 0x%08Lx, len = %i\n",
__func__, (unsigned long long)from, readlen);
@@ -1817,20 +1827,18 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
while (1) {
if (ops->mode == MTD_OPS_RAW)
- sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd);
+ ret = chip->ecc.read_oob_raw(mtd, chip, page);
else
- sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+ ret = chip->ecc.read_oob(mtd, chip, page);
+
+ if (ret < 0)
+ break;
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
if (!(chip->options & NAND_NO_READRDY)) {
- /*
- * Apply delay or wait for ready/busy pin. Do this
- * before the AUTOINCR check, so no problems arise if a
- * chip which does auto increment is marked as
- * NOAUTOINCR by the board driver.
- */
+ /* Apply delay or wait for ready/busy pin */
if (!chip->dev_ready)
udelay(chip->chip_delay);
else
@@ -1851,16 +1859,12 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
chip->select_chip(mtd, -1);
chip->select_chip(mtd, chipnr);
}
-
- /*
- * Check, if the chip supports auto page increment or if we
- * have hit a block boundary.
- */
- if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
- sndcmd = 1;
}
- ops->oobretlen = ops->ooblen;
+ ops->oobretlen = ops->ooblen - readlen;
+
+ if (ret < 0)
+ return ret;
if (mtd->ecc_stats.failed - stats.failed)
return -EBADMSG;
@@ -1919,14 +1923,16 @@ out:
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*
* Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
chip->write_buf(mtd, buf, mtd->writesize);
- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ if (oob_required)
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
}
/**
@@ -1934,12 +1940,13 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1973,9 +1980,10 @@ static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*/
static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1991,7 +1999,7 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
for (i = 0; i < chip->ecc.total; i++)
chip->oob_poi[eccpos[i]] = ecc_calc[i];
- chip->ecc.write_page_raw(mtd, chip, buf);
+ chip->ecc.write_page_raw(mtd, chip, buf, 1);
}
/**
@@ -1999,9 +2007,10 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*/
static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -2027,12 +2036,14 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
*
* The hw generator calculates the error syndrome automatically. Therefore we
* need a special oob layout and handling.
*/
static void nand_write_page_syndrome(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -2071,21 +2082,23 @@ static void nand_write_page_syndrome(struct mtd_info *mtd,
* @mtd: MTD device structure
* @chip: NAND chip descriptor
* @buf: the data to write
+ * @oob_required: must write chip->oob_poi to OOB
* @page: page number to write
* @cached: cached programming
* @raw: use _raw version of write_page
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached, int raw)
+ const uint8_t *buf, int oob_required, int page,
+ int cached, int raw)
{
int status;
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
if (unlikely(raw))
- chip->ecc.write_page_raw(mtd, chip, buf);
+ chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
else
- chip->ecc.write_page(mtd, chip, buf);
+ chip->ecc.write_page(mtd, chip, buf, oob_required);
/*
* Cached progamming disabled for now. Not sure if it's worth the
@@ -2118,6 +2131,9 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
if (chip->verify_buf(mtd, buf, mtd->writesize))
return -EIO;
+
+ /* Make sure the next page prog is preceded by a status read */
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
#endif
return 0;
}
@@ -2202,6 +2218,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
uint8_t *oob = ops->oobbuf;
uint8_t *buf = ops->datbuf;
int ret, subpage;
+ int oob_required = oob ? 1 : 0;
ops->retlen = 0;
if (!writelen)
@@ -2264,8 +2281,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
memset(chip->oob_poi, 0xff, mtd->oobsize);
}
- ret = chip->write_page(mtd, chip, wbuf, page, cached,
- (ops->mode == MTD_OPS_RAW));
+ ret = chip->write_page(mtd, chip, wbuf, oob_required, page,
+ cached, (ops->mode == MTD_OPS_RAW));
if (ret)
break;
@@ -2898,8 +2915,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
*busw = NAND_BUSWIDTH_16;
chip->options &= ~NAND_CHIPOPTIONS_MSK;
- chip->options |= (NAND_NO_READRDY |
- NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK;
+ chip->options |= NAND_NO_READRDY & NAND_CHIPOPTIONS_MSK;
pr_info("ONFI flash detected\n");
return 1;
@@ -3076,11 +3092,6 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
ident_done:
- /*
- * Set chip as a default. Board drivers can override it, if necessary.
- */
- chip->options |= NAND_NO_AUTOINCR;
-
/* Try to identify manufacturer */
for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
if (nand_manuf_ids[maf_idx].id == *maf_id)
@@ -3154,10 +3165,11 @@ ident_done:
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
- pr_info("NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
- nand_manuf_ids[maf_idx].name,
- chip->onfi_version ? chip->onfi_params.model : type->name);
+ pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
+ " page size: %d, OOB size: %d\n",
+ *maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
+ chip->onfi_version ? chip->onfi_params.model : type->name,
+ mtd->writesize, mtd->oobsize);
return type;
}
@@ -3329,8 +3341,13 @@ int nand_scan_tail(struct mtd_info *mtd)
if (!chip->ecc.write_oob)
chip->ecc.write_oob = nand_write_oob_syndrome;
- if (mtd->writesize >= chip->ecc.size)
+ if (mtd->writesize >= chip->ecc.size) {
+ if (!chip->ecc.strength) {
+ pr_warn("Driver must set ecc.strength when using hardware ECC\n");
+ BUG();
+ }
break;
+ }
pr_warn("%d byte HW ECC not possible on "
"%d byte page size, fallback to SW ECC\n",
chip->ecc.size, mtd->writesize);
@@ -3385,7 +3402,7 @@ int nand_scan_tail(struct mtd_info *mtd)
BUG();
}
chip->ecc.strength =
- chip->ecc.bytes*8 / fls(8*chip->ecc.size);
+ chip->ecc.bytes * 8 / fls(8 * chip->ecc.size);
break;
case NAND_ECC_NONE:
@@ -3483,7 +3500,7 @@ int nand_scan_tail(struct mtd_info *mtd)
/* propagate ecc info to mtd_info */
mtd->ecclayout = chip->ecc.layout;
- mtd->ecc_strength = chip->ecc.strength * chip->ecc.steps;
+ mtd->ecc_strength = chip->ecc.strength;
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 20a112f591fe..30d1319ff065 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -324,6 +324,7 @@ static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
buf += mtd->oobsize + mtd->writesize;
len -= mtd->writesize;
+ offs += mtd->writesize;
}
return 0;
}
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index af4fe8ca7b5e..621b70b7a159 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -70,7 +70,7 @@ struct nand_flash_dev nand_flash_ids[] = {
* These are the new chips with large page size. The pagesize and the
* erasesize is determined from the extended id bytes
*/
-#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY | NAND_NO_AUTOINCR)
+#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY)
#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
/* 512 Megabit */
@@ -157,9 +157,7 @@ struct nand_flash_dev nand_flash_ids[] = {
* writes possible, but not implemented now
*/
{"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000,
- NAND_IS_AND | NAND_NO_AUTOINCR |NAND_NO_READRDY | NAND_4PAGE_ARRAY |
- BBT_AUTO_REFRESH
- },
+ NAND_IS_AND | NAND_NO_READRDY | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
{NULL,}
};
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 261f478f8cc3..6cc8fbfabb8e 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -268,7 +268,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should "
#define OPT_PAGE512 0x00000002 /* 512-byte page chips */
#define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */
#define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */
-#define OPT_AUTOINCR 0x00000020 /* page number auto incrementation is possible */
#define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
#define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */
#define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
@@ -594,7 +593,7 @@ static int init_nandsim(struct mtd_info *mtd)
ns->options |= OPT_PAGE256;
}
else if (ns->geom.pgsz == 512) {
- ns->options |= (OPT_PAGE512 | OPT_AUTOINCR);
+ ns->options |= OPT_PAGE512;
if (ns->busw == 8)
ns->options |= OPT_PAGE512_8BIT;
} else if (ns->geom.pgsz == 2048) {
@@ -663,8 +662,6 @@ static int init_nandsim(struct mtd_info *mtd)
for (i = 0; nand_flash_ids[i].name != NULL; i++) {
if (second_id_byte != nand_flash_ids[i].id)
continue;
- if (!(nand_flash_ids[i].options & NAND_NO_AUTOINCR))
- ns->options |= OPT_AUTOINCR;
}
if (ns->busw == 16)
@@ -1936,20 +1933,8 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd)
if (ns->regs.count == ns->regs.num) {
NS_DBG("read_byte: all bytes were read\n");
- /*
- * The OPT_AUTOINCR allows to read next consecutive pages without
- * new read operation cycle.
- */
- if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
- ns->regs.count = 0;
- if (ns->regs.row + 1 < ns->geom.pgnum)
- ns->regs.row += 1;
- NS_DBG("read_byte: switch to the next page (%#x)\n", ns->regs.row);
- do_state_action(ns, ACTION_CPY);
- }
- else if (NS_STATE(ns->nxstate) == STATE_READY)
+ if (NS_STATE(ns->nxstate) == STATE_READY)
switch_state(ns);
-
}
return outb;
@@ -2203,14 +2188,7 @@ static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
ns->regs.count += len;
if (ns->regs.count == ns->regs.num) {
- if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
- ns->regs.count = 0;
- if (ns->regs.row + 1 < ns->geom.pgnum)
- ns->regs.row += 1;
- NS_DBG("read_buf: switch to the next page (%#x)\n", ns->regs.row);
- do_state_action(ns, ACTION_CPY);
- }
- else if (NS_STATE(ns->nxstate) == STATE_READY)
+ if (NS_STATE(ns->nxstate) == STATE_READY)
switch_state(ns);
}
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index c2b0bba9d8b3..d7f681d0c9b9 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -21,6 +21,10 @@
#include <linux/io.h>
#include <linux/slab.h>
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+#include <linux/bch.h>
+#endif
+
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
@@ -127,6 +131,11 @@ struct omap_nand_info {
} iomode;
u_char *buf;
int buf_len;
+
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+ struct bch_control *bch;
+ struct nand_ecclayout ecclayout;
+#endif
};
/**
@@ -402,7 +411,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
if (ret)
/* PFPW engine is busy, use cpu copy method */
- goto out_copy;
+ goto out_copy_unmap;
init_completion(&info->comp);
@@ -421,6 +430,8 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
return 0;
+out_copy_unmap:
+ dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
out_copy:
if (info->nand.options & NAND_BUSWIDTH_16)
is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
@@ -879,7 +890,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
unsigned long timeo = jiffies;
- int status = NAND_STATUS_FAIL, state = this->state;
+ int status, state = this->state;
if (state == FL_ERASING)
timeo += (HZ * 400) / 1000;
@@ -894,6 +905,8 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
break;
cond_resched();
}
+
+ status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
return status;
}
@@ -925,6 +938,226 @@ static int omap_dev_ready(struct mtd_info *mtd)
return 1;
}
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+
+/**
+ * omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ */
+static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
+{
+ int nerrors;
+ unsigned int dev_width;
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ struct nand_chip *chip = mtd->priv;
+
+ nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
+ dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ /*
+ * Program GPMC to perform correction on one 512-byte sector at a time.
+ * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
+ * gives a slight (5%) performance gain (but requires additional code).
+ */
+ (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+}
+
+/**
+ * omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ */
+static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+}
+
+/**
+ * omap3_calculate_ecc_bch8 - Generate 13 bytes of ECC bytes
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ */
+static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+}
+
+/**
+ * omap3_correct_data_bch - Decode received data and correct errors
+ * @mtd: MTD device structure
+ * @data: page data
+ * @read_ecc: ecc read from nand flash
+ * @calc_ecc: ecc read from HW ECC registers
+ */
+static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ int i, count;
+ /* cannot correct more than 8 errors */
+ unsigned int errloc[8];
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+
+ count = decode_bch(info->bch, NULL, 512, read_ecc, calc_ecc, NULL,
+ errloc);
+ if (count > 0) {
+ /* correct errors */
+ for (i = 0; i < count; i++) {
+ /* correct data only, not ecc bytes */
+ if (errloc[i] < 8*512)
+ data[errloc[i]/8] ^= 1 << (errloc[i] & 7);
+ pr_debug("corrected bitflip %u\n", errloc[i]);
+ }
+ } else if (count < 0) {
+ pr_err("ecc unrecoverable error\n");
+ }
+ return count;
+}
+
+/**
+ * omap3_free_bch - Release BCH ecc resources
+ * @mtd: MTD device structure
+ */
+static void omap3_free_bch(struct mtd_info *mtd)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ if (info->bch) {
+ free_bch(info->bch);
+ info->bch = NULL;
+ }
+}
+
+/**
+ * omap3_init_bch - Initialize BCH ECC
+ * @mtd: MTD device structure
+ * @ecc_opt: OMAP ECC mode (OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW)
+ */
+static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
+{
+ int ret, max_errors;
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+#ifdef CONFIG_MTD_NAND_OMAP_BCH8
+ const int hw_errors = 8;
+#else
+ const int hw_errors = 4;
+#endif
+ info->bch = NULL;
+
+ max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? 8 : 4;
+ if (max_errors != hw_errors) {
+ pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported",
+ max_errors, hw_errors);
+ goto fail;
+ }
+
+ /* initialize GPMC BCH engine */
+ ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
+ if (ret)
+ goto fail;
+
+ /* software bch library is only used to detect and locate errors */
+ info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
+ if (!info->bch)
+ goto fail;
+
+ info->nand.ecc.size = 512;
+ info->nand.ecc.hwctl = omap3_enable_hwecc_bch;
+ info->nand.ecc.correct = omap3_correct_data_bch;
+ info->nand.ecc.mode = NAND_ECC_HW;
+
+ /*
+ * The number of corrected errors in an ecc block that will trigger
+ * block scrubbing defaults to the ecc strength (4 or 8).
+ * Set mtd->bitflip_threshold here to define a custom threshold.
+ */
+
+ if (max_errors == 8) {
+ info->nand.ecc.strength = 8;
+ info->nand.ecc.bytes = 13;
+ info->nand.ecc.calculate = omap3_calculate_ecc_bch8;
+ } else {
+ info->nand.ecc.strength = 4;
+ info->nand.ecc.bytes = 7;
+ info->nand.ecc.calculate = omap3_calculate_ecc_bch4;
+ }
+
+ pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors);
+ return 0;
+fail:
+ omap3_free_bch(mtd);
+ return -1;
+}
+
+/**
+ * omap3_init_bch_tail - Build an oob layout for BCH ECC correction.
+ * @mtd: MTD device structure
+ */
+static int omap3_init_bch_tail(struct mtd_info *mtd)
+{
+ int i, steps;
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ struct nand_ecclayout *layout = &info->ecclayout;
+
+ /* build oob layout */
+ steps = mtd->writesize/info->nand.ecc.size;
+ layout->eccbytes = steps*info->nand.ecc.bytes;
+
+ /* do not bother creating special oob layouts for small page devices */
+ if (mtd->oobsize < 64) {
+ pr_err("BCH ecc is not supported on small page devices\n");
+ goto fail;
+ }
+
+ /* reserve 2 bytes for bad block marker */
+ if (layout->eccbytes+2 > mtd->oobsize) {
+ pr_err("no oob layout available for oobsize %d eccbytes %u\n",
+ mtd->oobsize, layout->eccbytes);
+ goto fail;
+ }
+
+ /* put ecc bytes at oob tail */
+ for (i = 0; i < layout->eccbytes; i++)
+ layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
+
+ layout->oobfree[0].offset = 2;
+ layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
+ info->nand.ecc.layout = layout;
+
+ if (!(info->nand.options & NAND_BUSWIDTH_16))
+ info->nand.badblock_pattern = &bb_descrip_flashbased;
+ return 0;
+fail:
+ omap3_free_bch(mtd);
+ return -1;
+}
+
+#else
+static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
+{
+ pr_err("CONFIG_MTD_NAND_OMAP_BCH is not enabled\n");
+ return -1;
+}
+static int omap3_init_bch_tail(struct mtd_info *mtd)
+{
+ return -1;
+}
+static void omap3_free_bch(struct mtd_info *mtd)
+{
+}
+#endif /* CONFIG_MTD_NAND_OMAP_BCH */
+
static int __devinit omap_nand_probe(struct platform_device *pdev)
{
struct omap_nand_info *info;
@@ -1063,6 +1296,13 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->nand.ecc.hwctl = omap_enable_hwecc;
info->nand.ecc.correct = omap_correct_data;
info->nand.ecc.mode = NAND_ECC_HW;
+ } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
+ (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) {
+ err = omap3_init_bch(&info->mtd, pdata->ecc_opt);
+ if (err) {
+ err = -EINVAL;
+ goto out_release_mem_region;
+ }
}
/* DIP switches on some boards change between 8 and 16 bit
@@ -1094,6 +1334,14 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
(offset + omap_oobinfo.eccbytes);
info->nand.ecc.layout = &omap_oobinfo;
+ } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
+ (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) {
+ /* build OOB layout for BCH ECC correction */
+ err = omap3_init_bch_tail(&info->mtd);
+ if (err) {
+ err = -EINVAL;
+ goto out_release_mem_region;
+ }
}
/* second phase scan */
@@ -1122,6 +1370,7 @@ static int omap_nand_remove(struct platform_device *pdev)
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
+ omap3_free_bch(&info->mtd);
platform_set_drvdata(pdev, NULL);
if (info->dma_ch != -1)
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 974dbf8251c9..1440e51cedcc 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -155,7 +155,6 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev)
chip->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- chip->options = NAND_NO_AUTOINCR;
chip->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 6404e6e81b10..1bcb52040422 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -23,14 +23,18 @@ struct plat_nand_data {
void __iomem *io_base;
};
+static const char *part_probe_types[] = { "cmdlinepart", NULL };
+
/*
* Probe for the NAND device.
*/
static int __devinit plat_nand_probe(struct platform_device *pdev)
{
struct platform_nand_data *pdata = pdev->dev.platform_data;
+ struct mtd_part_parser_data ppdata;
struct plat_nand_data *data;
struct resource *res;
+ const char **part_types;
int err = 0;
if (pdata->chip.nr_chips < 1) {
@@ -75,6 +79,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
data->chip.select_chip = pdata->ctrl.select_chip;
data->chip.write_buf = pdata->ctrl.write_buf;
data->chip.read_buf = pdata->ctrl.read_buf;
+ data->chip.read_byte = pdata->ctrl.read_byte;
data->chip.chip_delay = pdata->chip.chip_delay;
data->chip.options |= pdata->chip.options;
data->chip.bbt_options |= pdata->chip.bbt_options;
@@ -98,8 +103,10 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
goto out;
}
- err = mtd_device_parse_register(&data->mtd,
- pdata->chip.part_probe_types, NULL,
+ part_types = pdata->chip.part_probe_types ? : part_probe_types;
+
+ ppdata.of_node = pdev->dev.of_node;
+ err = mtd_device_parse_register(&data->mtd, part_types, &ppdata,
pdata->chip.partitions,
pdata->chip.nr_partitions);
@@ -140,12 +147,19 @@ static int __devexit plat_nand_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id plat_nand_match[] = {
+ { .compatible = "gen_nand" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, plat_nand_match);
+
static struct platform_driver plat_nand_driver = {
- .probe = plat_nand_probe,
- .remove = __devexit_p(plat_nand_remove),
- .driver = {
- .name = "gen_nand",
- .owner = THIS_MODULE,
+ .probe = plat_nand_probe,
+ .remove = __devexit_p(plat_nand_remove),
+ .driver = {
+ .name = "gen_nand",
+ .owner = THIS_MODULE,
+ .of_match_table = plat_nand_match,
},
};
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index def50caa6f84..252aaefcacfa 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -682,14 +682,15 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
}
static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
+ struct nand_chip *chip, const uint8_t *buf, int oob_required)
{
chip->write_buf(mtd, buf, mtd->writesize);
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
}
static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page)
+ struct nand_chip *chip, uint8_t *buf, int oob_required,
+ int page)
{
struct pxa3xx_nand_host *host = mtd->priv;
struct pxa3xx_nand_info *info = host->info_data;
@@ -1004,7 +1005,6 @@ KEEP_CONFIG:
chip->ecc.size = host->page_size;
chip->ecc.strength = 1;
- chip->options = NAND_NO_AUTOINCR;
chip->options |= NAND_NO_READRDY;
if (host->reg_ndcr & NDCR_DWIDTH_M)
chip->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index c2040187c813..8cb627751c9c 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -539,14 +539,11 @@ exit:
* nand_read_oob_syndrome assumes we can send column address - we can't
*/
static int r852_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd)
+ int page)
{
- if (sndcmd) {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
- sndcmd = 0;
- }
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- return sndcmd;
+ return 0;
}
/*
@@ -1104,18 +1101,7 @@ static struct pci_driver r852_pci_driver = {
.driver.pm = &r852_pm_ops,
};
-static __init int r852_module_init(void)
-{
- return pci_register_driver(&r852_pci_driver);
-}
-
-static void __exit r852_module_exit(void)
-{
- pci_unregister_driver(&r852_pci_driver);
-}
-
-module_init(r852_module_init);
-module_exit(r852_module_exit);
+module_pci_driver(r852_pci_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index e9b2b260de3a..aa9b8a5e0b8f 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -344,7 +344,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
}
static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -359,14 +359,14 @@ static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
if (flctl->hwecc_cant_correct[i])
mtd->ecc_stats.failed++;
else
- mtd->ecc_stats.corrected += 0;
+ mtd->ecc_stats.corrected += 0; /* FIXME */
}
return 0;
}
static void flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf)
+ const uint8_t *buf, int oob_required)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -881,8 +881,6 @@ static int __devinit flctl_probe(struct platform_device *pdev)
flctl->hwecc = pdata->has_hwecc;
flctl->holden = pdata->use_holden;
- nand->options = NAND_NO_AUTOINCR;
-
/* Set address of hardware control function */
/* 20 us command delay time */
nand->chip_delay = 20;
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index 774c3c266713..082bcdcd6bcf 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -94,17 +94,16 @@ static struct nand_flash_dev nand_smartmedia_flash_ids[] = {
{NULL,}
};
-#define XD_TYPEM (NAND_NO_AUTOINCR | NAND_BROKEN_XD)
static struct nand_flash_dev nand_xd_flash_ids[] = {
{"xD 16MiB 3,3V", 0x73, 512, 16, 0x4000, 0},
{"xD 32MiB 3,3V", 0x75, 512, 32, 0x4000, 0},
{"xD 64MiB 3,3V", 0x76, 512, 64, 0x4000, 0},
{"xD 128MiB 3,3V", 0x79, 512, 128, 0x4000, 0},
- {"xD 256MiB 3,3V", 0x71, 512, 256, 0x4000, XD_TYPEM},
- {"xD 512MiB 3,3V", 0xdc, 512, 512, 0x4000, XD_TYPEM},
- {"xD 1GiB 3,3V", 0xd3, 512, 1024, 0x4000, XD_TYPEM},
- {"xD 2GiB 3,3V", 0xd5, 512, 2048, 0x4000, XD_TYPEM},
+ {"xD 256MiB 3,3V", 0x71, 512, 256, 0x4000, NAND_BROKEN_XD},
+ {"xD 512MiB 3,3V", 0xdc, 512, 512, 0x4000, NAND_BROKEN_XD},
+ {"xD 1GiB 3,3V", 0xd3, 512, 1024, 0x4000, NAND_BROKEN_XD},
+ {"xD 2GiB 3,3V", 0xd5, 512, 2048, 0x4000, NAND_BROKEN_XD},
{NULL,}
};
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index b3ce12ef359e..7153e0d27101 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1201,7 +1201,8 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
if (mtd->ecc_stats.failed - stats.failed)
return -EBADMSG;
- return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+ /* return max bitflips per ecc step; ONENANDs correct 1 bit only */
+ return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
}
/**
@@ -1333,7 +1334,8 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
if (mtd->ecc_stats.failed - stats.failed)
return -EBADMSG;
- return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+ /* return max bitflips per ecc step; ONENANDs correct 1 bit only */
+ return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
}
/**
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index 44dca1f041c5..413ef89c2d1b 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -32,6 +32,13 @@ struct jffs2_inodirty;
struct jffs2_mount_opts {
bool override_compr;
unsigned int compr;
+
+ /* The size of the reserved pool. The reserved pool is the JFFS2 flash
+ * space which may only be used by root cannot be used by the other
+ * users. This is implemented simply by means of not allowing the
+ * latter users to write to the file system if the amount if the
+ * available space is less then 'rp_size'. */
+ unsigned int rp_size;
};
/* A struct for the overall file system control. Pointers to
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index 6784d1e7a7eb..0c96eb52c797 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -18,6 +18,37 @@
#include "nodelist.h"
#include "debug.h"
+/*
+ * Check whether the user is allowed to write.
+ */
+static int jffs2_rp_can_write(struct jffs2_sb_info *c)
+{
+ uint32_t avail;
+ struct jffs2_mount_opts *opts = &c->mount_opts;
+
+ avail = c->dirty_size + c->free_size + c->unchecked_size +
+ c->erasing_size - c->resv_blocks_write * c->sector_size
+ - c->nospc_dirty_size;
+
+ if (avail < 2 * opts->rp_size)
+ jffs2_dbg(1, "rpsize %u, dirty_size %u, free_size %u, "
+ "erasing_size %u, unchecked_size %u, "
+ "nr_erasing_blocks %u, avail %u, resrv %u\n",
+ opts->rp_size, c->dirty_size, c->free_size,
+ c->erasing_size, c->unchecked_size,
+ c->nr_erasing_blocks, avail, c->nospc_dirty_size);
+
+ if (avail > opts->rp_size)
+ return 1;
+
+ /* Always allow root */
+ if (capable(CAP_SYS_RESOURCE))
+ return 1;
+
+ jffs2_dbg(1, "forbid writing\n");
+ return 0;
+}
+
/**
* jffs2_reserve_space - request physical space to write nodes to flash
* @c: superblock info
@@ -55,6 +86,15 @@ int jffs2_reserve_space(struct jffs2_sb_info *c, uint32_t minsize,
spin_lock(&c->erase_completion_lock);
+ /*
+ * Check if the free space is greater then size of the reserved pool.
+ * If not, only allow root to proceed with writing.
+ */
+ if (prio != ALLOC_DELETION && !jffs2_rp_can_write(c)) {
+ ret = -ENOSPC;
+ goto out;
+ }
+
/* this needs a little more thought (true <tglx> :)) */
while(ret == -EAGAIN) {
while(c->nr_free_blocks + c->nr_erasing_blocks < blocksneeded) {
@@ -158,6 +198,8 @@ int jffs2_reserve_space(struct jffs2_sb_info *c, uint32_t minsize,
jffs2_dbg(1, "%s(): ret is %d\n", __func__, ret);
}
}
+
+out:
spin_unlock(&c->erase_completion_lock);
if (!ret)
ret = jffs2_prealloc_raw_node_refs(c, c->nextblock, 1);
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index dc0437e84763..1ea349fff68b 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -1266,19 +1266,25 @@ static int jffs2_do_read_inode_internal(struct jffs2_sb_info *c,
/* Symlink's inode data is the target path. Read it and
* keep in RAM to facilitate quick follow symlink
* operation. */
- f->target = kmalloc(je32_to_cpu(latest_node->csize) + 1, GFP_KERNEL);
+ uint32_t csize = je32_to_cpu(latest_node->csize);
+ if (csize > JFFS2_MAX_NAME_LEN) {
+ mutex_unlock(&f->sem);
+ jffs2_do_clear_inode(c, f);
+ return -ENAMETOOLONG;
+ }
+ f->target = kmalloc(csize + 1, GFP_KERNEL);
if (!f->target) {
- JFFS2_ERROR("can't allocate %d bytes of memory for the symlink target path cache\n", je32_to_cpu(latest_node->csize));
+ JFFS2_ERROR("can't allocate %u bytes of memory for the symlink target path cache\n", csize);
mutex_unlock(&f->sem);
jffs2_do_clear_inode(c, f);
return -ENOMEM;
}
ret = jffs2_flash_read(c, ref_offset(rii.latest_ref) + sizeof(*latest_node),
- je32_to_cpu(latest_node->csize), &retlen, (char *)f->target);
+ csize, &retlen, (char *)f->target);
- if (ret || retlen != je32_to_cpu(latest_node->csize)) {
- if (retlen != je32_to_cpu(latest_node->csize))
+ if (ret || retlen != csize) {
+ if (retlen != csize)
ret = -EIO;
kfree(f->target);
f->target = NULL;
@@ -1287,7 +1293,7 @@ static int jffs2_do_read_inode_internal(struct jffs2_sb_info *c,
return ret;
}
- f->target[je32_to_cpu(latest_node->csize)] = '\0';
+ f->target[csize] = '\0';
dbg_readinode("symlink's target '%s' cached\n", f->target);
}
@@ -1415,6 +1421,7 @@ int jffs2_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *i
mutex_unlock(&f->sem);
jffs2_do_clear_inode(c, f);
}
+ jffs2_xattr_do_crccheck_inode(c, ic);
kfree (f);
return ret;
}
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index bc586f204228..61ea41389f90 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -90,6 +90,8 @@ static int jffs2_show_options(struct seq_file *s, struct dentry *root)
if (opts->override_compr)
seq_printf(s, ",compr=%s", jffs2_compr_name(opts->compr));
+ if (opts->rp_size)
+ seq_printf(s, ",rp_size=%u", opts->rp_size / 1024);
return 0;
}
@@ -154,15 +156,18 @@ static const struct export_operations jffs2_export_ops = {
* JFFS2 mount options.
*
* Opt_override_compr: override default compressor
+ * Opt_rp_size: size of reserved pool in KiB
* Opt_err: just end of array marker
*/
enum {
Opt_override_compr,
+ Opt_rp_size,
Opt_err,
};
static const match_table_t tokens = {
{Opt_override_compr, "compr=%s"},
+ {Opt_rp_size, "rp_size=%u"},
{Opt_err, NULL},
};
@@ -170,6 +175,7 @@ static int jffs2_parse_options(struct jffs2_sb_info *c, char *data)
{
substring_t args[MAX_OPT_ARGS];
char *p, *name;
+ unsigned int opt;
if (!data)
return 0;
@@ -207,6 +213,17 @@ static int jffs2_parse_options(struct jffs2_sb_info *c, char *data)
kfree(name);
c->mount_opts.override_compr = true;
break;
+ case Opt_rp_size:
+ if (match_int(&args[0], &opt))
+ return -EINVAL;
+ opt *= 1024;
+ if (opt > c->mtd->size) {
+ pr_warn("Too large reserve pool specified, max "
+ "is %llu KB\n", c->mtd->size / 1024);
+ return -EINVAL;
+ }
+ c->mount_opts.rp_size = opt;
+ break;
default:
pr_err("Error: unrecognized mount option '%s' or missing value\n",
p);
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index b55b803eddcb..3034e970eb9a 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -11,6 +11,8 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define JFFS2_XATTR_IS_CORRUPTED 1
+
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/fs.h>
@@ -153,7 +155,7 @@ static int do_verify_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_dat
JFFS2_ERROR("node CRC failed at %#08x, read=%#08x, calc=%#08x\n",
offset, je32_to_cpu(rx.hdr_crc), crc);
xd->flags |= JFFS2_XFLAGS_INVALID;
- return -EIO;
+ return JFFS2_XATTR_IS_CORRUPTED;
}
totlen = PAD(sizeof(rx) + rx.name_len + 1 + je16_to_cpu(rx.value_len));
if (je16_to_cpu(rx.magic) != JFFS2_MAGIC_BITMASK
@@ -169,7 +171,7 @@ static int do_verify_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_dat
je32_to_cpu(rx.xid), xd->xid,
je32_to_cpu(rx.version), xd->version);
xd->flags |= JFFS2_XFLAGS_INVALID;
- return -EIO;
+ return JFFS2_XATTR_IS_CORRUPTED;
}
xd->xprefix = rx.xprefix;
xd->name_len = rx.name_len;
@@ -227,12 +229,12 @@ static int do_load_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum
data[xd->name_len] = '\0';
crc = crc32(0, data, length);
if (crc != xd->data_crc) {
- JFFS2_WARNING("node CRC failed (JFFS2_NODETYPE_XREF)"
+ JFFS2_WARNING("node CRC failed (JFFS2_NODETYPE_XATTR)"
" at %#08x, read: 0x%08x calculated: 0x%08x\n",
ref_offset(xd->node), xd->data_crc, crc);
kfree(data);
xd->flags |= JFFS2_XFLAGS_INVALID;
- return -EIO;
+ return JFFS2_XATTR_IS_CORRUPTED;
}
xd->flags |= JFFS2_XFLAGS_HOT;
@@ -270,7 +272,7 @@ static int load_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *x
if (xd->xname)
return 0;
if (xd->flags & JFFS2_XFLAGS_INVALID)
- return -EIO;
+ return JFFS2_XATTR_IS_CORRUPTED;
if (unlikely(is_xattr_datum_unchecked(c, xd)))
rc = do_verify_xattr_datum(c, xd);
if (!rc)
@@ -435,6 +437,8 @@ static void unrefer_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datu
* is called to release xattr related objects when unmounting.
* check_xattr_ref_inode(c, ic)
* is used to confirm inode does not have duplicate xattr name/value pair.
+ * jffs2_xattr_do_crccheck_inode(c, ic)
+ * is used to force xattr data integrity check during the initial gc scan.
* -------------------------------------------------- */
static int verify_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref)
{
@@ -462,7 +466,7 @@ static int verify_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref
if (crc != je32_to_cpu(rr.node_crc)) {
JFFS2_ERROR("node CRC failed at %#08x, read=%#08x, calc=%#08x\n",
offset, je32_to_cpu(rr.node_crc), crc);
- return -EIO;
+ return JFFS2_XATTR_IS_CORRUPTED;
}
if (je16_to_cpu(rr.magic) != JFFS2_MAGIC_BITMASK
|| je16_to_cpu(rr.nodetype) != JFFS2_NODETYPE_XREF
@@ -472,7 +476,7 @@ static int verify_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref
offset, je16_to_cpu(rr.magic), JFFS2_MAGIC_BITMASK,
je16_to_cpu(rr.nodetype), JFFS2_NODETYPE_XREF,
je32_to_cpu(rr.totlen), PAD(sizeof(rr)));
- return -EIO;
+ return JFFS2_XATTR_IS_CORRUPTED;
}
ref->ino = je32_to_cpu(rr.ino);
ref->xid = je32_to_cpu(rr.xid);
@@ -682,6 +686,11 @@ static int check_xattr_ref_inode(struct jffs2_sb_info *c, struct jffs2_inode_cac
return rc;
}
+void jffs2_xattr_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
+{
+ check_xattr_ref_inode(c, ic);
+}
+
/* -------- xattr subsystem functions ---------------
* jffs2_init_xattr_subsystem(c)
* is used to initialize semaphore and list_head, and some variables.
diff --git a/fs/jffs2/xattr.h b/fs/jffs2/xattr.h
index 7be4beb306f3..467ff376ee26 100644
--- a/fs/jffs2/xattr.h
+++ b/fs/jffs2/xattr.h
@@ -77,6 +77,7 @@ extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
uint32_t xid, uint32_t version);
+extern void jffs2_xattr_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
@@ -108,6 +109,7 @@ extern ssize_t jffs2_listxattr(struct dentry *, char *, size_t);
#define jffs2_build_xattr_subsystem(c)
#define jffs2_clear_xattr_subsystem(c)
+#define jffs2_xattr_do_crccheck_inode(c, ic)
#define jffs2_xattr_delete_inode(c, ic)
#define jffs2_xattr_free_inode(c, ic)
#define jffs2_verify_xattr(c) (1)
diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h
index 69b6dbf46b5e..ed3c4e09f3d1 100644
--- a/include/linux/mtd/gpmi-nand.h
+++ b/include/linux/mtd/gpmi-nand.h
@@ -23,12 +23,12 @@
#define GPMI_NAND_RES_SIZE 6
/* Resource names for the GPMI NAND driver. */
-#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "GPMI NAND GPMI Registers"
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand"
#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME "GPMI NAND GPMI Interrupt"
-#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "GPMI NAND BCH Registers"
-#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "GPMI NAND BCH Interrupt"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch"
#define GPMI_NAND_DMA_CHANNELS_RES_NAME "GPMI NAND DMA Channels"
-#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "GPMI NAND DMA Interrupt"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "gpmi-dma"
/**
* struct gpmi_nand_platform_data - GPMI NAND driver platform data.
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index cf5ea8cdcf8e..63dadc0dfb62 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -157,6 +157,15 @@ struct mtd_info {
unsigned int erasesize_mask;
unsigned int writesize_mask;
+ /*
+ * read ops return -EUCLEAN if max number of bitflips corrected on any
+ * one region comprising an ecc step equals or exceeds this value.
+ * Settable by driver, else defaults to ecc_strength. User can override
+ * in sysfs. N.B. The meaning of the -EUCLEAN return code has changed;
+ * see Documentation/ABI/testing/sysfs-class-mtd for more detail.
+ */
+ unsigned int bitflip_threshold;
+
// Kernel-only stuff starts here.
const char *name;
int index;
@@ -164,7 +173,7 @@ struct mtd_info {
/* ECC layout structure pointer - read only! */
struct nand_ecclayout *ecclayout;
- /* max number of correctible bit errors per writesize */
+ /* max number of correctible bit errors per ecc step */
unsigned int ecc_strength;
/* Data for variable erase regions. If numeraseregions is zero,
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 1482340d3d9f..57977c640529 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -161,8 +161,6 @@ typedef enum {
* Option constants for bizarre disfunctionality and real
* features.
*/
-/* Chip can not auto increment pages */
-#define NAND_NO_AUTOINCR 0x00000001
/* Buswidth is 16 bit */
#define NAND_BUSWIDTH_16 0x00000002
/* Device supports partial programming without padding */
@@ -207,7 +205,6 @@ typedef enum {
(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
/* Macros to identify the above */
-#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR))
#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
@@ -216,7 +213,7 @@ typedef enum {
&& (chip->page_shift > 9))
/* Mask to zero out the chip options, which come from the id table */
-#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
+#define NAND_CHIPOPTIONS_MSK 0x0000ffff
/* Non chip related options */
/* This option skips the bbt scan during initialization. */
@@ -363,21 +360,20 @@ struct nand_ecc_ctrl {
int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
uint8_t *calc_ecc);
int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page);
+ uint8_t *buf, int oob_required, int page);
void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf);
+ const uint8_t *buf, int oob_required);
int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page);
+ uint8_t *buf, int oob_required, int page);
int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offs, uint32_t len, uint8_t *buf);
void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf);
+ const uint8_t *buf, int oob_required);
int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
int page);
int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int sndcmd);
- int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
- int sndcmd);
+ int page);
+ int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page);
int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
int page);
};
@@ -459,6 +455,8 @@ struct nand_buffers {
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
* @pagebuf: [INTERN] holds the pagenumber which is currently in
* data_buf.
+ * @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is
+ * currently in data_buf.
* @subpagesize: [INTERN] holds the subpagesize
* @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
* non 0 if ONFI supported.
@@ -505,7 +503,8 @@ struct nand_chip {
int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
int status, int page);
int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached, int raw);
+ const uint8_t *buf, int oob_required, int page,
+ int cached, int raw);
int chip_delay;
unsigned int options;
@@ -519,6 +518,7 @@ struct nand_chip {
uint64_t chipsize;
int pagemask;
int pagebuf;
+ unsigned int pagebuf_bitflips;
int subpagesize;
uint8_t cellinfo;
int badblockpos;
@@ -654,6 +654,7 @@ struct platform_nand_ctrl {
void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ unsigned char (*read_byte)(struct mtd_info *mtd);
void *priv;
};