diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-driver-ufs')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-ufs | 531 |
1 files changed, 289 insertions, 242 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index e487f969a15e..a90612ab5780 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -711,7 +711,7 @@ Description: This file shows the thin provisioning type. This is one of The file is read only. -What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count +What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count Date: February 2018 Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Description: This file shows the total physical memory resources. This is @@ -920,14 +920,16 @@ Description: This file shows whether the configuration descriptor is locked. What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt What: /sys/bus/platform/devices/*.ufs/attributes/max_number_of_rtt -Date: February 2018 -Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Date: May 2024 +Contact: Avri Altman <avri.altman@wdc.com> Description: This file provides the maximum current number of - outstanding RTTs in device that is allowed. The full - information about the attribute could be found at - UFS specifications 2.1. + outstanding RTTs in device that is allowed. bMaxNumOfRTT is a + read-write persistent attribute and is equal to two after device + manufacturing. It shall not be set to a value greater than + bDeviceRTTCap value, and it may be set only when the hw queues are + empty. - The file is read only. + The file is read write. What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control What: /sys/bus/platform/devices/*.ufs/attributes/exception_event_control @@ -1223,6 +1225,55 @@ Description: This file shows the total latency (in micro seconds) of write The file is read only. +What: /sys/bus/platform/drivers/ufshcd/*/power_info/lane +What: /sys/bus/platform/devices/*.ufs/power_info/lane +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows how many lanes are enabled on the UFS link, + i.e., an output 2 means UFS link is operating with 2 lanes. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/mode +What: /sys/bus/platform/devices/*.ufs/power_info/mode +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the PA power mode of UFS. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/rate +What: /sys/bus/platform/devices/*.ufs/power_info/rate +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the speed rate of UFS link. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/gear +What: /sys/bus/platform/devices/*.ufs/power_info/gear +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the gear of UFS link. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/dev_pm +What: /sys/bus/platform/devices/*.ufs/power_info/dev_pm +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the UFS device power mode. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/link_state +What: /sys/bus/platform/devices/*.ufs/power_info/link_state +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the state of UFS link. + + The file is read only. + What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en Date: June 2020 @@ -1437,287 +1488,283 @@ Description: If avail_wb_buff < wb_flush_threshold, it indicates that WriteBooster buffer needs to be flushed, otherwise it is not necessary. -What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_version -What: /sys/bus/platform/devices/*.ufs/device_descriptor/hpb_version -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the HPB specification version. - The full information about the descriptor can be found in the UFS - HPB (Host Performance Booster) Extension specifications. - Example: version 1.2.3 = 0123h - - The file is read only. - -What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_control -What: /sys/bus/platform/devices/*.ufs/device_descriptor/hpb_control -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows an indication of the HPB control mode. - 00h: Host control mode - 01h: Device control mode +Contact: Daniil Lunev <dlunev@chromium.org> +What: /sys/bus/platform/drivers/ufshcd/*/capabilities/ +What: /sys/bus/platform/devices/*.ufs/capabilities/ +Date: August 2022 +Description: The group represents the effective capabilities of the + host-device pair. i.e. the capabilities which are enabled in the + driver for the specific host controller, supported by the host + controller and are supported and/or have compatible + configuration on the device side. - The file is read only. +Contact: Daniil Lunev <dlunev@chromium.org> +What: /sys/bus/platform/drivers/ufshcd/*/capabilities/clock_scaling +What: /sys/bus/platform/devices/*.ufs/capabilities/clock_scaling +Date: August 2022 +Contact: Daniil Lunev <dlunev@chromium.org> +Description: Indicates status of clock scaling. -What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_region_size -What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/hpb_region_size -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the bHPBRegionSize which can be calculated - as in the following (in bytes): - HPB Region size = 512B * 2^bHPBRegionSize + == ============================ + 0 Clock scaling is not supported. + 1 Clock scaling is supported. + == ============================ The file is read only. -What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_number_lu -What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/hpb_number_lu -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the maximum number of HPB LU supported by - the device. - 00h: HPB is not supported by the device. - 01h ~ 20h: Maximum number of HPB LU supported by the device - - The file is read only. +What: /sys/bus/platform/drivers/ufshcd/*/capabilities/write_booster +What: /sys/bus/platform/devices/*.ufs/capabilities/write_booster +Date: August 2022 +Contact: Daniil Lunev <dlunev@chromium.org> +Description: Indicates status of Write Booster. -What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_subregion_size -What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/hpb_subregion_size -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the bHPBSubRegionSize, which can be - calculated as in the following (in bytes) and shall be a multiple of - logical block size: - HPB Sub-Region size = 512B x 2^bHPBSubRegionSize - bHPBSubRegionSize shall not exceed bHPBRegionSize. + == ============================ + 0 Write Booster can not be enabled. + 1 Write Booster can be enabled. + == ============================ The file is read only. -What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_max_active_regions -What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/hpb_max_active_regions -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the maximum number of active HPB regions that - is supported by the device. +What: /sys/bus/platform/drivers/ufshcd/*/rtc_update_ms +What: /sys/bus/platform/devices/*.ufs/rtc_update_ms +Date: November 2023 +Contact: Bean Huo <beanhuo@micron.com> +Description: + rtc_update_ms indicates how often the host should synchronize or update the + UFS RTC. If set to 0, this will disable UFS RTC periodic update. +What: /sys/devices/platform/.../ufshci_capabilities/version +Date: August 2024 +Contact: Avri Altman <avri.altman@wdc.com> +Description: + Host Capabilities register group: UFS version register. + Symbol - VER. This file shows the UFSHCD version. + Example: Version 3.12 would be represented as 0000_0312h. The file is read only. -What: /sys/class/scsi_device/*/device/unit_descriptor/hpb_lu_max_active_regions -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the maximum number of HPB regions assigned to - the HPB logical unit. - +What: /sys/devices/platform/.../ufshci_capabilities/product_id +Date: August 2024 +Contact: Avri Altman <avri.altman@wdc.com> +Description: + Host Capabilities register group: product ID register. + Symbol - HCPID. This file shows the UFSHCD product id. + The content of this register is vendor specific. The file is read only. -What: /sys/class/scsi_device/*/device/unit_descriptor/hpb_pinned_region_start_offset -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the start offset of HPB pinned region. - +What: /sys/devices/platform/.../ufshci_capabilities/man_id +Date: August 2024 +Contact: Avri Altman <avri.altman@wdc.com> +Description: + Host Capabilities register group: manufacturer ID register. + Symbol - HCMID. This file shows the UFSHCD manufacturer id. + The Manufacturer ID is defined by JEDEC in JEDEC-JEP106. The file is read only. -What: /sys/class/scsi_device/*/device/unit_descriptor/hpb_number_pinned_regions -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the number of HPB pinned regions assigned to - the HPB logical unit. +What: /sys/bus/platform/drivers/ufshcd/*/critical_health +What: /sys/bus/platform/devices/*.ufs/critical_health +Date: February 2025 +Contact: Avri Altman <avri.altman@wdc.com> +Description: Report the number of times a critical health event has been + reported by a UFS device. Further insight into the specific + issue can be gained by reading one of: bPreEOLInfo, + bDeviceLifeTimeEstA, bDeviceLifeTimeEstB, + bWriteBoosterBufferLifeTimeEst, and bRPMBLifeTimeEst. The file is read only. -What: /sys/class/scsi_device/*/device/hpb_stats/hit_cnt -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the number of reads that changed to HPB read. +What: /sys/bus/platform/drivers/ufshcd/*/clkscale_enable +What: /sys/bus/platform/devices/*.ufs/clkscale_enable +Date: January 2025 +Contact: Ziqi Chen <quic_ziqichen@quicinc.com> +Description: + This attribute shows whether the UFS clock scaling is enabled or not. + And it can be used to enable/disable the clock scaling by writing + 1 or 0 to this attribute. - The file is read only. + The attribute is read/write. -What: /sys/class/scsi_device/*/device/hpb_stats/miss_cnt -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the number of reads that cannot be changed to - HPB read. +What: /sys/bus/platform/drivers/ufshcd/*/clkgate_enable +What: /sys/bus/platform/devices/*.ufs/clkgate_enable +Date: January 2025 +Contact: Ziqi Chen <quic_ziqichen@quicinc.com> +Description: + This attribute shows whether the UFS clock gating is enabled or not. + And it can be used to enable/disable the clock gating by writing + 1 or 0 to this attribute. - The file is read only. + The attribute is read/write. -What: /sys/class/scsi_device/*/device/hpb_stats/rcmd_noti_cnt -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the number of response UPIUs that has - recommendations for activating sub-regions and/or inactivating region. +What: /sys/bus/platform/drivers/ufshcd/*/clkgate_delay_ms +What: /sys/bus/platform/devices/*.ufs/clkgate_delay_ms +Date: January 2025 +Contact: Ziqi Chen <quic_ziqichen@quicinc.com> +Description: + This attribute shows and sets the number of milliseconds of idle time + before the UFS driver starts to perform clock gating. This can + prevent the UFS from frequently performing clock gating/ungating. - The file is read only. + The attribute is read/write. -What: /sys/class/scsi_device/*/device/hpb_stats/rcmd_active_cnt -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: For the HPB device control mode, this entry shows the number of - active sub-regions recommended by response UPIUs. For the HPB host control - mode, this entry shows the number of active sub-regions recommended by the - HPB host control mode heuristic algorithm. +What: /sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_count +What: /sys/bus/platform/devices/*.ufs/device_lvl_exception_count +Date: March 2025 +Contact: Bao D. Nguyen <quic_nguyenb@quicinc.com> +Description: + This attribute is applicable to ufs devices compliant to the + JEDEC specifications version 4.1 or later. The + device_lvl_exception_count is a counter indicating the number of + times the device level exceptions have occurred since the last + time this variable is reset. Writing a 0 value to this + attribute will reset the device_lvl_exception_count. If the + device_lvl_exception_count reads a positive value, the user + application should read the device_lvl_exception_id attribute to + know more information about the exception. + + The attribute is read/write. + +What: /sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_id +What: /sys/bus/platform/devices/*.ufs/device_lvl_exception_id +Date: March 2025 +Contact: Bao D. Nguyen <quic_nguyenb@quicinc.com> +Description: + Reading the device_lvl_exception_id returns the + qDeviceLevelExceptionID attribute of the ufs device JEDEC + specification version 4.1. The definition of the + qDeviceLevelExceptionID is the ufs device vendor specific + implementation. Refer to the device manufacturer datasheet for + more information on the meaning of the qDeviceLevelExceptionID + attribute value. + + The attribute is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/wb_resize_enable +What: /sys/bus/platform/devices/*.ufs/wb_resize_enable +Date: April 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + The host can enable the WriteBooster buffer resize by setting this + attribute. - The file is read only. + ======== ====================================== + idle There is no resize operation + decrease Decrease WriteBooster buffer size + increase Increase WriteBooster buffer size + ======== ====================================== -What: /sys/class/scsi_device/*/device/hpb_stats/rcmd_inactive_cnt -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: For the HPB device control mode, this entry shows the number of - inactive regions recommended by response UPIUs. For the HPB host control - mode, this entry shows the number of inactive regions recommended by the - HPB host control mode heuristic algorithm. + The file is write only. - The file is read only. +What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_hint +What: /sys/bus/platform/devices/*.ufs/attributes/wb_resize_hint +Date: April 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + wb_resize_hint indicates hint information about which type of resize + for WriteBooster buffer is recommended by the device. -What: /sys/class/scsi_device/*/device/hpb_stats/map_req_cnt -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the number of read buffer commands for - activating sub-regions recommended by response UPIUs. + ========= ====================================== + keep Recommend keep the buffer size + decrease Recommend to decrease the buffer size + increase Recommend to increase the buffer size + ========= ====================================== The file is read only. -What: /sys/class/scsi_device/*/device/hpb_params/requeue_timeout_ms -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the requeue timeout threshold for write buffer - command in ms. The value can be changed by writing an integer to - this entry. - -What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_size_hpb_single_cmd -What: /sys/bus/platform/devices/*.ufs/attributes/max_data_size_hpb_single_cmd -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the maximum HPB data size for using a single HPB - command. +What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_status +What: /sys/bus/platform/devices/*.ufs/attributes/wb_resize_status +Date: April 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + The host can check the resize operation status of the WriteBooster + buffer by reading this attribute. - === ======== - 00h 4KB - 01h 8KB - 02h 12KB - ... - FFh 1024KB - === ======== + ================ ======================================== + idle Resize operation is not issued + in_progress Resize operation in progress + complete_success Resize operation completed successfully + general_failure Resize operation general failure + ================ ======================================== The file is read only. -What: /sys/bus/platform/drivers/ufshcd/*/flags/hpb_enable -What: /sys/bus/platform/devices/*.ufs/flags/hpb_enable -Date: June 2021 -Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the status of HPB. +What: /sys/bus/platform/drivers/ufshcd/*/hid/analysis_trigger +What: /sys/bus/platform/devices/*.ufs/hid/analysis_trigger +Date: May 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + The host can enable or disable HID analysis operation. - == ============================ - 0 HPB is not enabled. - 1 HPB is enabled - == ============================ + ======= ========================================= + disable disable HID analysis operation + enable enable HID analysis operation + ======= ========================================= - The file is read only. + The file is write only. -Contact: Daniil Lunev <dlunev@chromium.org> -What: /sys/bus/platform/drivers/ufshcd/*/capabilities/ -What: /sys/bus/platform/devices/*.ufs/capabilities/ -Date: August 2022 -Description: The group represents the effective capabilities of the - host-device pair. i.e. the capabilities which are enabled in the - driver for the specific host controller, supported by the host - controller and are supported and/or have compatible - configuration on the device side. +What: /sys/bus/platform/drivers/ufshcd/*/hid/defrag_trigger +What: /sys/bus/platform/devices/*.ufs/hid/defrag_trigger +Date: May 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + The host can enable or disable HID defragmentation operation. -Contact: Daniil Lunev <dlunev@chromium.org> -What: /sys/bus/platform/drivers/ufshcd/*/capabilities/clock_scaling -What: /sys/bus/platform/devices/*.ufs/capabilities/clock_scaling -Date: August 2022 -Contact: Daniil Lunev <dlunev@chromium.org> -Description: Indicates status of clock scaling. + ======= ========================================= + disable disable HID defragmentation operation + enable enable HID defragmentation operation + ======= ========================================= - == ============================ - 0 Clock scaling is not supported. - 1 Clock scaling is supported. - == ============================ + The attribute is write only. - The file is read only. +What: /sys/bus/platform/drivers/ufshcd/*/hid/fragmented_size +What: /sys/bus/platform/devices/*.ufs/hid/fragmented_size +Date: May 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + The total fragmented size in the device is reported through + this attribute. -What: /sys/bus/platform/drivers/ufshcd/*/capabilities/write_booster -What: /sys/bus/platform/devices/*.ufs/capabilities/write_booster -Date: August 2022 -Contact: Daniil Lunev <dlunev@chromium.org> -Description: Indicates status of Write Booster. + The attribute is read only. - == ============================ - 0 Write Booster can not be enabled. - 1 Write Booster can be enabled. - == ============================ +What: /sys/bus/platform/drivers/ufshcd/*/hid/defrag_size +What: /sys/bus/platform/devices/*.ufs/hid/defrag_size +Date: May 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + The host sets the size to be defragmented by an HID + defragmentation operation. - The file is read only. + The attribute is read/write. -What: /sys/class/scsi_device/*/device/hpb_param_sysfs/activation_thld -Date: February 2021 -Contact: Avri Altman <avri.altman@wdc.com> -Description: In host control mode, reads are the major source of activation - trials. Once this threshold hs met, the region is added to the - "to-be-activated" list. Since we reset the read counter upon - write, this include sending a rb command updating the region - ppn as well. - -What: /sys/class/scsi_device/*/device/hpb_param_sysfs/normalization_factor -Date: February 2021 -Contact: Avri Altman <avri.altman@wdc.com> -Description: In host control mode, we think of the regions as "buckets". - Those buckets are being filled with reads, and emptied on write. - We use entries_per_srgn - the amount of blocks in a subregion as - our bucket size. This applies because HPB1.0 only handles - single-block reads. Once the bucket size is crossed, we trigger - a normalization work - not only to avoid overflow, but mainly - because we want to keep those counters normalized, as we are - using those reads as a comparative score, to make various decisions. - The normalization is dividing (shift right) the read counter by - the normalization_factor. If during consecutive normalizations - an active region has exhausted its reads - inactivate it. - -What: /sys/class/scsi_device/*/device/hpb_param_sysfs/eviction_thld_enter -Date: February 2021 -Contact: Avri Altman <avri.altman@wdc.com> -Description: Region deactivation is often due to the fact that eviction took - place: A region becomes active at the expense of another. This is - happening when the max-active-regions limit has been crossed. - In host mode, eviction is considered an extreme measure. We - want to verify that the entering region has enough reads, and - the exiting region has much fewer reads. eviction_thld_enter is - the min reads that a region must have in order to be considered - a candidate for evicting another region. - -What: /sys/class/scsi_device/*/device/hpb_param_sysfs/eviction_thld_exit -Date: February 2021 -Contact: Avri Altman <avri.altman@wdc.com> -Description: Same as above for the exiting region. A region is considered to - be a candidate for eviction only if it has fewer reads than - eviction_thld_exit. +What: /sys/bus/platform/drivers/ufshcd/*/hid/progress_ratio +What: /sys/bus/platform/devices/*.ufs/hid/progress_ratio +Date: May 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + Defragmentation progress is reported by this attribute, + indicates the ratio of the completed defragmentation size + over the requested defragmentation size. -What: /sys/class/scsi_device/*/device/hpb_param_sysfs/read_timeout_ms -Date: February 2021 -Contact: Avri Altman <avri.altman@wdc.com> -Description: In order not to hang on to "cold" regions, we inactivate - a region that has no READ access for a predefined amount of - time - read_timeout_ms. If read_timeout_ms has expired, and the - region is dirty, it is less likely that we can make any use of - HPB reading it so we inactivate it. Still, deactivation has - its overhead, and we may still benefit from HPB reading this - region if it is clean - see read_timeout_expiries. - -What: /sys/class/scsi_device/*/device/hpb_param_sysfs/read_timeout_expiries -Date: February 2021 -Contact: Avri Altman <avri.altman@wdc.com> -Description: If the region read timeout has expired, but the region is clean, - just re-wind its timer for another spin. Do that as long as it - is clean and did not exhaust its read_timeout_expiries threshold. + ==== ============================================ + 1 1% + ... + 100 100% + ==== ============================================ -What: /sys/class/scsi_device/*/device/hpb_param_sysfs/timeout_polling_interval_ms -Date: February 2021 -Contact: Avri Altman <avri.altman@wdc.com> -Description: The frequency with which the delayed worker that checks the - read_timeouts is awakened. + The attribute is read only. -What: /sys/class/scsi_device/*/device/hpb_param_sysfs/inflight_map_req -Date: February 2021 -Contact: Avri Altman <avri.altman@wdc.com> -Description: In host control mode the host is the originator of map requests. - To avoid flooding the device with map requests, use a simple throttling - mechanism that limits the number of inflight map requests. +What: /sys/bus/platform/drivers/ufshcd/*/hid/state +What: /sys/bus/platform/devices/*.ufs/hid/state +Date: May 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + The HID state is reported by this attribute. + + ==================== =========================== + idle Idle (analysis required) + analysis_in_progress Analysis in progress + defrag_required Defrag required + defrag_in_progress Defrag in progress + defrag_completed Defrag completed + defrag_not_required Defrag is not required + ==================== =========================== + + The attribute is read only. |